Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (144 commits)
  USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004)
  USB: serial: ftdi_sio: add support for TIOCSERGETLSR
  USB: ehci-mxc: Setup portsc register prior to accessing OTG viewport
  USB: atmel_usba_udc: fix freeing irq in usba_udc_remove()
  usb: ehci-omap: fix tll channel enable mask
  usb: ohci-omap3: fix trivial typo
  USB: gadget: ci13xxx: don't assume that PAGE_SIZE is 4096
  USB: gadget: ci13xxx: fix complete() callback for no_interrupt rq's
  USB: gadget: update ci13xxx to work with g_ether
  USB: gadgets: ci13xxx: fix probing of compiled-in gadget drivers
  Revert "USB: musb: pm: don't rely fully on clock support"
  Revert "USB: musb: blackfin: pm: make it work"
  USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path
  USB: uas: Ensure we only bind to a UAS interface
  USB: uas: Rename sense pipe and sense urb to status pipe and status urb
  USB: uas: Use kzalloc instead of kmalloc
  USB: uas: Fix up the Sense IU
  usb: musb: core: kill unneeded #include's
  DA8xx: assign name to MUSB IRQ resource
  usb: gadget: g_ncm added
  ...

Manually fix up trivial conflicts in USB Kconfig changes in:
	arch/arm/mach-omap2/Kconfig
	arch/sh/Kconfig
	drivers/usb/Kconfig
	drivers/usb/host/ehci-hcd.c
and annoying chip clock data conflicts in:
	arch/arm/mach-omap2/clock3xxx_data.c
	arch/arm/mach-omap2/clock44xx_data.c

1 files changed, 305 insertions, 73 deletions

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index ed618bde1ee..a3f12333fc4 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -31,10 +31,18 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include "musb_core.h"
 #include "omap2430.h"
 
+struct omap2430_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct clk		*clk;
+};
+#define glue_to_musb(g)		platform_get_drvdata(g->musb)
 
 static struct timer_list musb_idle_timer;
 
@@ -49,12 +57,8 @@ static void musb_do_idle(unsigned long _musb)
 
 	spin_lock_irqsave(&musb->lock, flags);
 
-	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-
 	switch (musb->xceiv->state) {
 	case OTG_STATE_A_WAIT_BCON:
-		devctl &= ~MUSB_DEVCTL_SESSION;
-		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
 		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 		if (devctl & MUSB_DEVCTL_BDEVICE) {
@@ -98,7 +102,7 @@ static void musb_do_idle(unsigned long _musb)
 }
 
 
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
 {
 	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
 	static unsigned long	last_timer;
@@ -131,15 +135,11 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 	mod_timer(&musb_idle_timer, timeout);
 }
 
-void musb_platform_enable(struct musb *musb)
-{
-}
-void musb_platform_disable(struct musb *musb)
-{
-}
-static void omap_set_vbus(struct musb *musb, int is_on)
+static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
 {
 	u8		devctl;
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+	int ret = 1;
 	/* HDRC controls CPEN, but beware current surges during device
 	 * connect.  They can trigger transient overcurrent conditions
 	 * that must be ignored.
@@ -148,12 +148,35 @@ static void omap_set_vbus(struct musb *musb, int is_on)
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
 	if (is_on) {
-		musb->is_active = 1;
-		musb->xceiv->default_a = 1;
-		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
-		devctl |= MUSB_DEVCTL_SESSION;
-
-		MUSB_HST_MODE(musb);
+		if (musb->xceiv->state == OTG_STATE_A_IDLE) {
+			/* start the session */
+			devctl |= MUSB_DEVCTL_SESSION;
+			musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+			/*
+			 * Wait for the musb to set as A device to enable the
+			 * VBUS
+			 */
+			while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
+
+				cpu_relax();
+
+				if (time_after(jiffies, timeout)) {
+					dev_err(musb->controller,
+					"configured as A device timeout");
+					ret = -EINVAL;
+					break;
+				}
+			}
+
+			if (ret && musb->xceiv->set_vbus)
+				otg_set_vbus(musb->xceiv, 1);
+		} else {
+			musb->is_active = 1;
+			musb->xceiv->default_a = 1;
+			musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+			devctl |= MUSB_DEVCTL_SESSION;
+			MUSB_HST_MODE(musb);
+		}
 	} else {
 		musb->is_active = 0;
 
@@ -175,9 +198,7 @@ static void omap_set_vbus(struct musb *musb, int is_on)
 		musb_readb(musb->mregs, MUSB_DEVCTL));
 }
 
-static int musb_platform_resume(struct musb *musb);
-
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
 	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
@@ -187,10 +208,94 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
 	return 0;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static inline void omap2430_low_level_exit(struct musb *musb)
 {
 	u32 l;
-	struct omap_musb_board_data *data = board_data;
+
+	/* in any role */
+	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
+	l |= ENABLEFORCE;	/* enable MSTANDBY */
+	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+
+	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
+	l |= ENABLEWAKEUP;	/* enable wakeup */
+	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+}
+
+static inline void omap2430_low_level_init(struct musb *musb)
+{
+	u32 l;
+
+	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
+	l &= ~ENABLEWAKEUP;	/* disable wakeup */
+	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+
+	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
+	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
+	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+}
+
+/* blocking notifier support */
+static int musb_otg_notifications(struct notifier_block *nb,
+		unsigned long event, void *unused)
+{
+	struct musb	*musb = container_of(nb, struct musb, nb);
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *pdata = dev->platform_data;
+	struct omap_musb_board_data *data = pdata->board_data;
+
+	switch (event) {
+	case USB_EVENT_ID:
+		DBG(4, "ID GND\n");
+
+		if (is_otg_enabled(musb)) {
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+			if (musb->gadget_driver) {
+				otg_init(musb->xceiv);
+
+				if (data->interface_type ==
+						MUSB_INTERFACE_UTMI)
+					omap2430_musb_set_vbus(musb, 1);
+
+			}
+#endif
+		} else {
+			otg_init(musb->xceiv);
+			if (data->interface_type ==
+					MUSB_INTERFACE_UTMI)
+				omap2430_musb_set_vbus(musb, 1);
+		}
+		break;
+
+	case USB_EVENT_VBUS:
+		DBG(4, "VBUS Connect\n");
+
+		otg_init(musb->xceiv);
+		break;
+
+	case USB_EVENT_NONE:
+		DBG(4, "VBUS Disconnect\n");
+
+		if (data->interface_type == MUSB_INTERFACE_UTMI) {
+			if (musb->xceiv->set_vbus)
+				otg_set_vbus(musb->xceiv, 0);
+		}
+		otg_shutdown(musb->xceiv);
+		break;
+	default:
+		DBG(4, "ID float\n");
+		return NOTIFY_DONE;
+	}
+
+	return NOTIFY_OK;
+}
+
+static int omap2430_musb_init(struct musb *musb)
+{
+	u32 l, status = 0;
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
 
 	/* We require some kind of external transceiver, hooked
 	 * up through ULPI.  TWL4030-family PMICs include one,
@@ -202,7 +307,7 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 		return -ENODEV;
 	}
 
-	musb_platform_resume(musb);
+	omap2430_low_level_init(musb);
 
 	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
 	l &= ~ENABLEWAKEUP;	/* disable wakeup */
@@ -239,87 +344,214 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 			musb_readl(musb->mregs, OTG_INTERFSEL),
 			musb_readl(musb->mregs, OTG_SIMENABLE));
 
-	if (is_host_enabled(musb))
-		musb->board_set_vbus = omap_set_vbus;
+	musb->nb.notifier_call = musb_otg_notifications;
+	status = otg_register_notifier(musb->xceiv, &musb->nb);
+
+	if (status)
+		DBG(1, "notification register failed\n");
+
+	/* check whether cable is already connected */
+	if (musb->xceiv->state ==OTG_STATE_B_IDLE)
+		musb_otg_notifications(&musb->nb, 1,
+					musb->xceiv->gadget);
 
 	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
 
 	return 0;
 }
 
-#ifdef CONFIG_PM
-void musb_platform_save_context(struct musb *musb,
-		struct musb_context_registers *musb_context)
+static int omap2430_musb_exit(struct musb *musb)
 {
-	musb_context->otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG);
-	musb_context->otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY);
-}
 
-void musb_platform_restore_context(struct musb *musb,
-		struct musb_context_registers *musb_context)
-{
-	musb_writel(musb->mregs, OTG_SYSCONFIG, musb_context->otg_sysconfig);
-	musb_writel(musb->mregs, OTG_FORCESTDBY, musb_context->otg_forcestandby);
+	omap2430_low_level_exit(musb);
+	otg_put_transceiver(musb->xceiv);
+
+	return 0;
 }
-#endif
 
-static int musb_platform_suspend(struct musb *musb)
+static const struct musb_platform_ops omap2430_ops = {
+	.init		= omap2430_musb_init,
+	.exit		= omap2430_musb_exit,
+
+	.set_mode	= omap2430_musb_set_mode,
+	.try_idle	= omap2430_musb_try_idle,
+
+	.set_vbus	= omap2430_musb_set_vbus,
+};
+
+static u64 omap2430_dmamask = DMA_BIT_MASK(32);
+
+static int __init omap2430_probe(struct platform_device *pdev)
 {
-	u32 l;
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct omap2430_glue		*glue;
+	struct clk			*clk;
 
-	if (!musb->clock)
-		return 0;
+	int				ret = -ENOMEM;
 
-	/* in any role */
-	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
-	l |= ENABLEFORCE;	/* enable MSTANDBY */
-	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
 
-	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
-	l |= ENABLEWAKEUP;	/* enable wakeup */
-	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
 
-	otg_set_suspend(musb->xceiv, 1);
+	clk = clk_get(&pdev->dev, "ick");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err2;
+	}
 
-	if (musb->set_clock)
-		musb->set_clock(musb->clock, 0);
-	else
-		clk_disable(musb->clock);
+	ret = clk_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err3;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &omap2430_dmamask;
+	musb->dev.coherent_dma_mask	= omap2430_dmamask;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->clk			= clk;
+
+	pdata->platform_ops		= &omap2430_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err4;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err4;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err4;
+	}
 
 	return 0;
+
+err4:
+	clk_disable(clk);
+
+err3:
+	clk_put(clk);
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
 }
 
-static int musb_platform_resume(struct musb *musb)
+static int __exit omap2430_remove(struct platform_device *pdev)
 {
-	u32 l;
+	struct omap2430_glue		*glue = platform_get_drvdata(pdev);
 
-	if (!musb->clock)
-		return 0;
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+	clk_disable(glue->clk);
+	clk_put(glue->clk);
+	kfree(glue);
 
-	otg_set_suspend(musb->xceiv, 0);
+	return 0;
+}
 
-	if (musb->set_clock)
-		musb->set_clock(musb->clock, 1);
-	else
-		clk_enable(musb->clock);
+#ifdef CONFIG_PM
+static void omap2430_save_context(struct musb *musb)
+{
+	musb->context.otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG);
+	musb->context.otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY);
+}
 
-	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
-	l &= ~ENABLEWAKEUP;	/* disable wakeup */
-	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+static void omap2430_restore_context(struct musb *musb)
+{
+	musb_writel(musb->mregs, OTG_SYSCONFIG, musb->context.otg_sysconfig);
+	musb_writel(musb->mregs, OTG_FORCESTDBY, musb->context.otg_forcestandby);
+}
 
-	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
-	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
-	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+static int omap2430_suspend(struct device *dev)
+{
+	struct omap2430_glue		*glue = dev_get_drvdata(dev);
+	struct musb			*musb = glue_to_musb(glue);
+
+	omap2430_low_level_exit(musb);
+	otg_set_suspend(musb->xceiv, 1);
+	omap2430_save_context(musb);
+	clk_disable(glue->clk);
 
 	return 0;
 }
 
-
-int musb_platform_exit(struct musb *musb)
+static int omap2430_resume(struct device *dev)
 {
+	struct omap2430_glue		*glue = dev_get_drvdata(dev);
+	struct musb			*musb = glue_to_musb(glue);
+	int				ret;
+
+	ret = clk_enable(glue->clk);
+	if (ret) {
+		dev_err(dev, "faled to enable clock\n");
+		return ret;
+	}
 
-	musb_platform_suspend(musb);
+	omap2430_low_level_init(musb);
+	omap2430_restore_context(musb);
+	otg_set_suspend(musb->xceiv, 0);
 
-	otg_put_transceiver(musb->xceiv);
 	return 0;
 }
+
+static struct dev_pm_ops omap2430_pm_ops = {
+	.suspend	= omap2430_suspend,
+	.resume		= omap2430_resume,
+};
+
+#define DEV_PM_OPS	(&omap2430_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static struct platform_driver omap2430_driver = {
+	.remove		= __exit_p(omap2430_remove),
+	.driver		= {
+		.name	= "musb-omap2430",
+		.pm	= DEV_PM_OPS,
+	},
+};
+
+MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init omap2430_init(void)
+{
+	return platform_driver_probe(&omap2430_driver, omap2430_probe);
+}
+subsys_initcall(omap2430_init);
+
+static void __exit omap2430_exit(void)
+{
+	platform_driver_unregister(&omap2430_driver);
+}
+module_exit(omap2430_exit);