Merge tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB patch set for the 3.6-rc1 merge window.

  Lots of little changes in here, primarily for gadget controllers and
  drivers.  There's some scsi changes that I think also went in through
  the scsi tree, but they merge just fine.  All of these patches have
  been in the linux-next tree for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up trivial conflicts in include/scsi/scsi_device.h (same libata
conflict that Jeff had already encountered)

* tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits)
  usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  usb: Add quirk detection based on interface information
  usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h
  USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  USB: add USB_VENDOR_AND_INTERFACE_INFO() macro
  USB: notify phy when root hub port connect change
  USB: remove 8 bytes of padding from usb_host_interface on 64 bit builds
  USB: option: add ZTE MF821D
  USB: sierra: QMI mode MC7710 moved to qcserial
  USB: qcserial: adding Sierra Wireless devices
  USB: qcserial: support generic Qualcomm serial ports
  USB: qcserial: make probe more flexible
  USB: qcserial: centralize probe exit path
  USB: qcserial: consolidate usb_set_interface calls
  USB: ehci-s5p: Add support for device tree
  USB: ohci-exynos: Add support for device tree
  USB: ehci-omap: fix compile failure(v1)
  usb: host: tegra: pass correct pointer in ehci_setup()
  USB: ehci-fsl: Update ifdef check to work on 64-bit ppc
  USB: serial: keyspan: Removed unrequired parentheses.
  ...

1 files changed, 77 insertions, 47 deletions

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index c7785e81254..5fdb9da8dd5 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -34,6 +34,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/pm_runtime.h>
 #include <linux/err.h>
+#include <linux/usb/musb-omap.h>
 
 #include "musb_core.h"
 #include "omap2430.h"
@@ -41,9 +42,13 @@
 struct omap2430_glue {
 	struct device		*dev;
 	struct platform_device	*musb;
+	enum omap_musb_vbus_id_status status;
+	struct work_struct	omap_musb_mailbox_work;
 };
 #define glue_to_musb(g)		platform_get_drvdata(g->musb)
 
+struct omap2430_glue		*_glue;
+
 static struct timer_list musb_idle_timer;
 
 static void musb_do_idle(unsigned long _musb)
@@ -223,50 +228,63 @@ static inline void omap2430_low_level_init(struct musb *musb)
 	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
 }
 
-static int musb_otg_notifications(struct notifier_block *nb,
-		unsigned long event, void *unused)
+void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
 {
-	struct musb	*musb = container_of(nb, struct musb, nb);
+	struct omap2430_glue	*glue = _glue;
+	struct musb		*musb = glue_to_musb(glue);
 
-	musb->xceiv_event = event;
-	schedule_work(&musb->otg_notifier_work);
+	glue->status = status;
+	if (!musb) {
+		dev_err(glue->dev, "musb core is not yet ready\n");
+		return;
+	}
 
-	return NOTIFY_OK;
+	schedule_work(&glue->omap_musb_mailbox_work);
 }
+EXPORT_SYMBOL_GPL(omap_musb_mailbox);
 
-static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
+static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 {
-	struct musb *musb = container_of(data_notifier_work, struct musb, otg_notifier_work);
+	struct musb *musb = glue_to_musb(glue);
 	struct device *dev = musb->controller;
 	struct musb_hdrc_platform_data *pdata = dev->platform_data;
 	struct omap_musb_board_data *data = pdata->board_data;
+	struct usb_otg *otg = musb->xceiv->otg;
 
-	switch (musb->xceiv_event) {
-	case USB_EVENT_ID:
-		dev_dbg(musb->controller, "ID GND\n");
+	switch (glue->status) {
+	case OMAP_MUSB_ID_GROUND:
+		dev_dbg(dev, "ID GND\n");
 
+		otg->default_a = true;
+		musb->xceiv->state = OTG_STATE_A_IDLE;
+		musb->xceiv->last_event = USB_EVENT_ID;
 		if (!is_otg_enabled(musb) || musb->gadget_driver) {
-			pm_runtime_get_sync(musb->controller);
+			pm_runtime_get_sync(dev);
 			usb_phy_init(musb->xceiv);
 			omap2430_musb_set_vbus(musb, 1);
 		}
 		break;
 
-	case USB_EVENT_VBUS:
-		dev_dbg(musb->controller, "VBUS Connect\n");
+	case OMAP_MUSB_VBUS_VALID:
+		dev_dbg(dev, "VBUS Connect\n");
 
+		otg->default_a = false;
+		musb->xceiv->state = OTG_STATE_B_IDLE;
+		musb->xceiv->last_event = USB_EVENT_VBUS;
 		if (musb->gadget_driver)
-			pm_runtime_get_sync(musb->controller);
+			pm_runtime_get_sync(dev);
 		usb_phy_init(musb->xceiv);
 		break;
 
-	case USB_EVENT_NONE:
-		dev_dbg(musb->controller, "VBUS Disconnect\n");
+	case OMAP_MUSB_ID_FLOAT:
+	case OMAP_MUSB_VBUS_OFF:
+		dev_dbg(dev, "VBUS Disconnect\n");
 
+		musb->xceiv->last_event = USB_EVENT_NONE;
 		if (is_otg_enabled(musb) || is_peripheral_enabled(musb))
 			if (musb->gadget_driver) {
-				pm_runtime_mark_last_busy(musb->controller);
-				pm_runtime_put_autosuspend(musb->controller);
+				pm_runtime_mark_last_busy(dev);
+				pm_runtime_put_autosuspend(dev);
 			}
 
 		if (data->interface_type == MUSB_INTERFACE_UTMI) {
@@ -276,15 +294,24 @@ static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
 		usb_phy_shutdown(musb->xceiv);
 		break;
 	default:
-		dev_dbg(musb->controller, "ID float\n");
+		dev_dbg(dev, "ID float\n");
 	}
 }
 
+
+static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
+{
+	struct omap2430_glue *glue = container_of(mailbox_work,
+				struct omap2430_glue, omap_musb_mailbox_work);
+	omap_musb_set_mailbox(glue);
+}
+
 static int omap2430_musb_init(struct musb *musb)
 {
 	u32 l;
 	int status = 0;
 	struct device *dev = musb->controller;
+	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 	struct musb_hdrc_platform_data *plat = dev->platform_data;
 	struct omap_musb_board_data *data = plat->board_data;
 
@@ -292,14 +319,12 @@ static int omap2430_musb_init(struct musb *musb)
 	 * up through ULPI.  TWL4030-family PMICs include one,
 	 * which needs a driver, drivers aren't always needed.
 	 */
-	musb->xceiv = usb_get_transceiver();
-	if (!musb->xceiv) {
+	musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		pr_err("HS USB OTG: no transceiver configured\n");
 		return -ENODEV;
 	}
 
-	INIT_WORK(&musb->otg_notifier_work, musb_otg_notifier_work);
-
 	status = pm_runtime_get_sync(dev);
 	if (status < 0) {
 		dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
@@ -326,14 +351,11 @@ static int omap2430_musb_init(struct musb *musb)
 			musb_readl(musb->mregs, OTG_INTERFSEL),
 			musb_readl(musb->mregs, OTG_SIMENABLE));
 
-	musb->nb.notifier_call = musb_otg_notifications;
-	status = usb_register_notifier(musb->xceiv, &musb->nb);
-
-	if (status)
-		dev_dbg(musb->controller, "notification register failed\n");
-
 	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
 
+	if (glue->status != OMAP_MUSB_UNKNOWN)
+		omap_musb_set_mailbox(glue);
+
 	pm_runtime_put_noidle(musb->controller);
 	return 0;
 
@@ -346,12 +368,13 @@ static void omap2430_musb_enable(struct musb *musb)
 	u8		devctl;
 	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 	struct device *dev = musb->controller;
+	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 	struct musb_hdrc_platform_data *pdata = dev->platform_data;
 	struct omap_musb_board_data *data = pdata->board_data;
 
-	switch (musb->xceiv->last_event) {
+	switch (glue->status) {
 
-	case USB_EVENT_ID:
+	case OMAP_MUSB_ID_GROUND:
 		usb_phy_init(musb->xceiv);
 		if (data->interface_type != MUSB_INTERFACE_UTMI)
 			break;
@@ -370,7 +393,7 @@ static void omap2430_musb_enable(struct musb *musb)
 		}
 		break;
 
-	case USB_EVENT_VBUS:
+	case OMAP_MUSB_VBUS_VALID:
 		usb_phy_init(musb->xceiv);
 		break;
 
@@ -381,17 +404,18 @@ static void omap2430_musb_enable(struct musb *musb)
 
 static void omap2430_musb_disable(struct musb *musb)
 {
-	if (musb->xceiv->last_event)
+	struct device *dev = musb->controller;
+	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
+
+	if (glue->status != OMAP_MUSB_UNKNOWN)
 		usb_phy_shutdown(musb->xceiv);
 }
 
 static int omap2430_musb_exit(struct musb *musb)
 {
 	del_timer_sync(&musb_idle_timer);
-	cancel_work_sync(&musb->otg_notifier_work);
 
 	omap2430_low_level_exit(musb);
-	usb_put_transceiver(musb->xceiv);
 
 	return 0;
 }
@@ -418,7 +442,7 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
 	struct omap2430_glue		*glue;
 	int				ret = -ENOMEM;
 
-	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
 	if (!glue) {
 		dev_err(&pdev->dev, "failed to allocate glue context\n");
 		goto err0;
@@ -427,7 +451,7 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
 	musb = platform_device_alloc("musb-hdrc", -1);
 	if (!musb) {
 		dev_err(&pdev->dev, "failed to allocate musb device\n");
-		goto err1;
+		goto err0;
 	}
 
 	musb->dev.parent		= &pdev->dev;
@@ -436,22 +460,31 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
 
 	glue->dev			= &pdev->dev;
 	glue->musb			= musb;
+	glue->status			= OMAP_MUSB_UNKNOWN;
 
 	pdata->platform_ops		= &omap2430_ops;
 
 	platform_set_drvdata(pdev, glue);
 
+	/*
+	 * REVISIT if we ever have two instances of the wrapper, we will be
+	 * in big trouble
+	 */
+	_glue	= glue;
+
+	INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work);
+
 	ret = platform_device_add_resources(musb, pdev->resource,
 			pdev->num_resources);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add resources\n");
-		goto err2;
+		goto err1;
 	}
 
 	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add platform_data\n");
-		goto err2;
+		goto err1;
 	}
 
 	pm_runtime_enable(&pdev->dev);
@@ -459,16 +492,13 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
 	ret = platform_device_add(musb);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register musb device\n");
-		goto err2;
+		goto err1;
 	}
 
 	return 0;
 
-err2:
-	platform_device_put(musb);
-
 err1:
-	kfree(glue);
+	platform_device_put(musb);
 
 err0:
 	return ret;
@@ -478,9 +508,9 @@ static int __devexit omap2430_remove(struct platform_device *pdev)
 {
 	struct omap2430_glue		*glue = platform_get_drvdata(pdev);
 
+	cancel_work_sync(&glue->omap_musb_mailbox_work);
 	platform_device_del(glue->musb);
 	platform_device_put(glue->musb);
-	kfree(glue);
 
 	return 0;
 }
@@ -546,7 +576,7 @@ static int __init omap2430_init(void)
 {
 	return platform_driver_register(&omap2430_driver);
 }
-module_init(omap2430_init);
+subsys_initcall(omap2430_init);
 
 static void __exit omap2430_exit(void)
 {