Merge tag 'usb-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: changes for v3.14 merge window

This pull request is quite extensive, containing
105 non-merge commits. Because of that, we describe
the changes in sections below:

New drivers:
	- Keystone PHY driver and DWC3 Glue Layer
	- Aeroflex Gaisler GRUSBDC
	- Tahvo PHY driver for N770
	- JZ4740 MUSB gluer Layer
	- Broadcom PHY Driver

Important new features:
	- MUSB DSPS learned about suspend/resume
	- New quirk_ep_out_aligned_size flag added to struct usb_gadget
	- DWC3 initializes the new quirk flag so gadget drivers can use it.
	- AM335x PHY Driver learns about remote wakeup
	- Renesas USBHS now requests DMA Engine only once
	- s3c-hsotg is now re-used on Broadcom devices
	- USB PHY layer now makes sure to initialize the notifier for all
		drivers
	- omap-control learned about TI's new AM437x devices
	- few other usb gadget/function drivers learned about the new
		configfs-based binding.

Misc Fixes and Clean Ups:
	- Several sparse fixes all over the place
	- Removal of redundant of_match_ptr()
	- r-car gen2 phy now uses usb_add_phy_dev()
	- removal of DEFINE_PCI_DEVICE_TABLE() from a few drivers
	- conversion to clk_prepare/clk_unprepare on r8a66597-udc
	- some randconfig errors and build warnings were fixed
	- removal of unnecessary lock on dwc3-omap.c

Signed-of-by: Felipe Balbi <balbi@ti.com>

11 files changed, 442 insertions, 67 deletions

diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 57dfc0cedb0..688dc8bb192 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -6,7 +6,7 @@
 # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
 config USB_MUSB_HDRC
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
-	depends on USB_GADGET
+	depends on (USB || USB_GADGET)
 	help
 	  Say Y here if your system has a dual role high speed USB
 	  controller based on the Mentor Graphics silicon IP.  Then
@@ -35,21 +35,21 @@ choice
 
 config USB_MUSB_HOST
 	bool "Host only mode"
-	depends on USB
+	depends on USB=y || USB=USB_MUSB_HDRC
 	help
 	  Select this when you want to use MUSB in host mode only,
 	  thereby the gadget feature will be regressed.
 
 config USB_MUSB_GADGET
 	bool "Gadget only mode"
-	depends on USB_GADGET
+	depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC
 	help
 	  Select this when you want to use MUSB in gadget mode only,
 	  thereby the host feature will be regressed.
 
 config USB_MUSB_DUAL_ROLE
 	bool "Dual Role mode"
-	depends on (USB && USB_GADGET)
+	depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC))
 	help
 	  This is the default mode of working of MUSB controller where
 	  both host and gadget features are enabled.
@@ -93,6 +93,12 @@ config USB_MUSB_BLACKFIN
 config USB_MUSB_UX500
 	tristate "Ux500 platforms"
 
+config USB_MUSB_JZ4740
+	tristate "JZ4740"
+	depends on MACH_JZ4740 || COMPILE_TEST
+	depends on USB_MUSB_GADGET
+	depends on USB_OTG_BLACKLIST_HUB
+
 endchoice
 
 config USB_MUSB_AM335X_CHILD
@@ -100,7 +106,7 @@ config USB_MUSB_AM335X_CHILD
 
 choice
 	prompt 'MUSB DMA mode'
-	default MUSB_PIO_ONLY if ARCH_MULTIPLATFORM
+	default MUSB_PIO_ONLY if ARCH_MULTIPLATFORM || USB_MUSB_JZ4740
 	default USB_UX500_DMA if USB_MUSB_UX500
 	default USB_INVENTRA_DMA if USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
 	default USB_TI_CPPI_DMA if USB_MUSB_DAVINCI
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index c5ea5c6dc16..ba495018b41 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_USB_MUSB_DAVINCI)			+= davinci.o
 obj-$(CONFIG_USB_MUSB_DA8XX)			+= da8xx.o
 obj-$(CONFIG_USB_MUSB_BLACKFIN)			+= blackfin.o
 obj-$(CONFIG_USB_MUSB_UX500)			+= ux500.o
+obj-$(CONFIG_USB_MUSB_JZ4740)			+= jz4740.o
 
 
 obj-$(CONFIG_USB_MUSB_AM335X_CHILD)		+= musb_am335x.o
diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
new file mode 100644
index 00000000000..5f30537f192
--- /dev/null
+++ b/drivers/usb/musb/jz4740.c
@@ -0,0 +1,201 @@
+/*
+ * Ingenic JZ4740 "glue layer"
+ *
+ * Copyright (C) 2013, Apelete Seketeli <apelete@seketeli.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "musb_core.h"
+
+struct jz4740_glue {
+	struct device           *dev;
+	struct platform_device  *musb;
+	struct clk		*clk;
+};
+
+static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
+{
+	unsigned long   flags;
+	irqreturn_t     retval = IRQ_NONE;
+	struct musb     *musb = __hci;
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+	/*
+	 * The controller is gadget only, the state of the host mode IRQ bits is
+	 * undefined. Mask them to make sure that the musb driver core will
+	 * never see them set
+	 */
+	musb->int_usb &= MUSB_INTR_SUSPEND | MUSB_INTR_RESUME |
+	    MUSB_INTR_RESET | MUSB_INTR_SOF;
+
+	if (musb->int_usb || musb->int_tx || musb->int_rx)
+		retval = musb_interrupt(musb);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+
+	return retval;
+}
+
+static struct musb_fifo_cfg jz4740_musb_fifo_cfg[] = {
+{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, },
+{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, },
+{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 64, },
+};
+
+static struct musb_hdrc_config jz4740_musb_config = {
+	/* Silicon does not implement USB OTG. */
+	.multipoint = 0,
+	/* Max EPs scanned, driver will decide which EP can be used. */
+	.num_eps    = 4,
+	/* RAMbits needed to configure EPs from table */
+	.ram_bits   = 9,
+	.fifo_cfg = jz4740_musb_fifo_cfg,
+	.fifo_cfg_size = ARRAY_SIZE(jz4740_musb_fifo_cfg),
+};
+
+static struct musb_hdrc_platform_data jz4740_musb_platform_data = {
+	.mode   = MUSB_PERIPHERAL,
+	.config = &jz4740_musb_config,
+};
+
+static int jz4740_musb_init(struct musb *musb)
+{
+	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (!musb->xceiv) {
+		pr_err("HS UDC: no transceiver configured\n");
+		return -ENODEV;
+	}
+
+	/* Silicon does not implement ConfigData register.
+	 * Set dyn_fifo to avoid reading EP config from hardware.
+	 */
+	musb->dyn_fifo = true;
+
+	musb->isr = jz4740_musb_interrupt;
+
+	return 0;
+}
+
+static int jz4740_musb_exit(struct musb *musb)
+{
+	usb_put_phy(musb->xceiv);
+
+	return 0;
+}
+
+static const struct musb_platform_ops jz4740_musb_ops = {
+	.init		= jz4740_musb_init,
+	.exit		= jz4740_musb_exit,
+};
+
+static int jz4740_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = &jz4740_musb_platform_data;
+	struct platform_device		*musb;
+	struct jz4740_glue		*glue;
+	struct clk                      *clk;
+	int				ret;
+
+	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+	if (!glue)
+		return -ENOMEM;
+
+	musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		return -ENOMEM;
+	}
+
+	clk = devm_clk_get(&pdev->dev, "udc");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err_platform_device_put;
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err_platform_device_put;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->clk			= clk;
+
+	pdata->platform_ops		= &jz4740_musb_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+					    pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err_clk_disable;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err_clk_disable;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err_clk_disable;
+	}
+
+	return 0;
+
+err_clk_disable:
+	clk_disable_unprepare(clk);
+err_platform_device_put:
+	platform_device_put(musb);
+	return ret;
+}
+
+static int jz4740_remove(struct platform_device *pdev)
+{
+	struct jz4740_glue	*glue = platform_get_drvdata(pdev);
+
+	platform_device_unregister(glue->musb);
+	clk_disable_unprepare(glue->clk);
+
+	return 0;
+}
+
+static struct platform_driver jz4740_driver = {
+	.probe		= jz4740_probe,
+	.remove		= jz4740_remove,
+	.driver		= {
+		.name	= "musb-jz4740",
+	},
+};
+
+MODULE_DESCRIPTION("JZ4740 MUSB Glue Layer");
+MODULE_AUTHOR("Apelete Seketeli <apelete@seketeli.net>");
+MODULE_LICENSE("GPL v2");
+module_platform_driver(jz4740_driver);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 4d4499b8044..5942f002fa5 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -478,8 +478,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 				musb->port1_status |=
 						(USB_PORT_STAT_C_SUSPEND << 16)
 						| MUSB_PORT_STAT_RESUME;
-				musb->rh_timer = jiffies
-						+ msecs_to_jiffies(20);
+				schedule_delayed_work(
+					&musb->finish_resume_work, 20);
 
 				musb->xceiv->state = OTG_STATE_A_HOST;
 				musb->is_active = 1;
@@ -1813,6 +1813,21 @@ static void musb_free(struct musb *musb)
 	musb_host_free(musb);
 }
 
+static void musb_deassert_reset(struct work_struct *work)
+{
+	struct musb *musb;
+	unsigned long flags;
+
+	musb = container_of(work, struct musb, deassert_reset_work.work);
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	if (musb->port1_status & USB_PORT_STAT_RESET)
+		musb_port_reset(musb, false);
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
 /*
  * Perform generic per-controller initialization.
  *
@@ -1897,6 +1912,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 
 	/* Init IRQ workqueue before request_irq */
 	INIT_WORK(&musb->irq_work, musb_irq_work);
+	INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset);
+	INIT_DELAYED_WORK(&musb->finish_resume_work, musb_host_finish_resume);
 
 	/* setup musb parts of the core (especially endpoints) */
 	status = musb_core_init(plat->config->multipoint
@@ -1940,17 +1957,26 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	switch (musb->port_mode) {
 	case MUSB_PORT_MODE_HOST:
 		status = musb_host_setup(musb, plat->power);
+		if (status < 0)
+			goto fail3;
+		status = musb_platform_set_mode(musb, MUSB_HOST);
 		break;
 	case MUSB_PORT_MODE_GADGET:
 		status = musb_gadget_setup(musb);
+		if (status < 0)
+			goto fail3;
+		status = musb_platform_set_mode(musb, MUSB_PERIPHERAL);
 		break;
 	case MUSB_PORT_MODE_DUAL_ROLE:
 		status = musb_host_setup(musb, plat->power);
 		if (status < 0)
 			goto fail3;
 		status = musb_gadget_setup(musb);
-		if (status)
+		if (status) {
 			musb_host_cleanup(musb);
+			goto fail3;
+		}
+		status = musb_platform_set_mode(musb, MUSB_OTG);
 		break;
 	default:
 		dev_err(dev, "unsupported port mode %d\n", musb->port_mode);
@@ -1981,6 +2007,8 @@ fail4:
 
 fail3:
 	cancel_work_sync(&musb->irq_work);
+	cancel_delayed_work_sync(&musb->finish_resume_work);
+	cancel_delayed_work_sync(&musb->deassert_reset_work);
 	if (musb->dma_controller)
 		dma_controller_destroy(musb->dma_controller);
 fail2_5:
@@ -2044,6 +2072,8 @@ static int musb_remove(struct platform_device *pdev)
 		dma_controller_destroy(musb->dma_controller);
 
 	cancel_work_sync(&musb->irq_work);
+	cancel_delayed_work_sync(&musb->finish_resume_work);
+	cancel_delayed_work_sync(&musb->deassert_reset_work);
 	musb_free(musb);
 	device_init_wakeup(dev, 0);
 	return 0;
@@ -2216,16 +2246,28 @@ static int musb_suspend(struct device *dev)
 		 */
 	}
 
+	musb_save_context(musb);
+
 	spin_unlock_irqrestore(&musb->lock, flags);
 	return 0;
 }
 
 static int musb_resume_noirq(struct device *dev)
 {
-	/* for static cmos like DaVinci, register values were preserved
+	struct musb	*musb = dev_to_musb(dev);
+
+	/*
+	 * For static cmos like DaVinci, register values were preserved
 	 * unless for some reason the whole soc powered down or the USB
 	 * module got reset through the PSC (vs just being disabled).
+	 *
+	 * For the DSPS glue layer though, a full register restore has to
+	 * be done. As it shouldn't harm other platforms, we do it
+	 * unconditionally.
 	 */
+
+	musb_restore_context(musb);
+
 	return 0;
 }
 
@@ -2283,19 +2325,4 @@ static struct platform_driver musb_driver = {
 	.shutdown	= musb_shutdown,
 };
 
-/*-------------------------------------------------------------------------*/
-
-static int __init musb_init(void)
-{
-	if (usb_disabled())
-		return 0;
-
-	return platform_driver_register(&musb_driver);
-}
-module_init(musb_init);
-
-static void __exit musb_cleanup(void)
-{
-	platform_driver_unregister(&musb_driver);
-}
-module_exit(musb_cleanup);
+module_platform_driver(musb_driver);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 29f7cd7c796..7083e82776f 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -47,6 +47,7 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/musb.h>
 #include <linux/phy/phy.h>
+#include <linux/workqueue.h>
 
 struct musb;
 struct musb_hw_ep;
@@ -295,6 +296,8 @@ struct musb {
 
 	irqreturn_t		(*isr)(int, void *);
 	struct work_struct	irq_work;
+	struct delayed_work	deassert_reset_work;
+	struct delayed_work	finish_resume_work;
 	u16			hwvers;
 
 	u16			intrrxe;
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 1901f6fe580..593d3c96256 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -83,6 +83,8 @@ struct dsps_musb_wrapper {
 	u16	coreintr_status;
 	u16	phy_utmi;
 	u16	mode;
+	u16	tx_mode;
+	u16	rx_mode;
 
 	/* bit positions for control */
 	unsigned	reset:5;
@@ -106,10 +108,24 @@ struct dsps_musb_wrapper {
 
 	/* bit positions for mode */
 	unsigned	iddig:5;
+	unsigned	iddig_mux:5;
 	/* miscellaneous stuff */
 	u8		poll_seconds;
 };
 
+/*
+ * register shadow for suspend
+ */
+struct dsps_context {
+	u32 control;
+	u32 epintr;
+	u32 coreintr;
+	u32 phy_utmi;
+	u32 mode;
+	u32 tx_mode;
+	u32 rx_mode;
+};
+
 /**
  * DSPS glue structure.
  */
@@ -119,6 +135,8 @@ struct dsps_glue {
 	const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
 	struct timer_list timer;	/* otg_workaround timer */
 	unsigned long last_timer;    /* last timer data for each instance */
+
+	struct dsps_context context;
 };
 
 static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout)
@@ -341,8 +359,9 @@ static irqreturn_t dsps_interrupt(int irq, void *hci)
 	if (musb->int_tx || musb->int_rx || musb->int_usb)
 		ret |= musb_interrupt(musb);
 
-	/* Poll for ID change */
-	if (musb->xceiv->state == OTG_STATE_B_IDLE)
+	/* Poll for ID change in OTG port mode */
+	if (musb->xceiv->state == OTG_STATE_B_IDLE &&
+			musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
 		mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
 out:
 	spin_unlock_irqrestore(&musb->lock, flags);
@@ -406,6 +425,54 @@ static int dsps_musb_exit(struct musb *musb)
 	return 0;
 }
 
+static int dsps_musb_set_mode(struct musb *musb, u8 mode)
+{
+	struct device *dev = musb->controller;
+	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	void __iomem *ctrl_base = musb->ctrl_base;
+	void __iomem *base = musb->mregs;
+	u32 reg;
+
+	reg = dsps_readl(base, wrp->mode);
+
+	switch (mode) {
+	case MUSB_HOST:
+		reg &= ~(1 << wrp->iddig);
+
+		/*
+		 * if we're setting mode to host-only or device-only, we're
+		 * going to ignore whatever the PHY sends us and just force
+		 * ID pin status by SW
+		 */
+		reg |= (1 << wrp->iddig_mux);
+
+		dsps_writel(base, wrp->mode, reg);
+		dsps_writel(ctrl_base, wrp->phy_utmi, 0x02);
+		break;
+	case MUSB_PERIPHERAL:
+		reg |= (1 << wrp->iddig);
+
+		/*
+		 * if we're setting mode to host-only or device-only, we're
+		 * going to ignore whatever the PHY sends us and just force
+		 * ID pin status by SW
+		 */
+		reg |= (1 << wrp->iddig_mux);
+
+		dsps_writel(base, wrp->mode, reg);
+		break;
+	case MUSB_OTG:
+		dsps_writel(base, wrp->phy_utmi, 0x02);
+		break;
+	default:
+		dev_err(glue->dev, "unsupported mode %d\n", mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static struct musb_platform_ops dsps_ops = {
 	.init		= dsps_musb_init,
 	.exit		= dsps_musb_exit,
@@ -414,6 +481,7 @@ static struct musb_platform_ops dsps_ops = {
 	.disable	= dsps_musb_disable,
 
 	.try_idle	= dsps_musb_try_idle,
+	.set_mode	= dsps_musb_set_mode,
 };
 
 static u64 musb_dmamask = DMA_BIT_MASK(32);
@@ -507,6 +575,7 @@ static int dsps_create_musb_pdev(struct dsps_glue *glue,
 
 	config->num_eps = get_int_prop(dn, "mentor,num-eps");
 	config->ram_bits = get_int_prop(dn, "mentor,ram-bits");
+	config->host_port_deassert_reset_at_resume = 1;
 	pdata.mode = get_musb_port_mode(dev);
 	/* DT keeps this entry in mA, musb expects it as per USB spec */
 	pdata.power = get_int_prop(dn, "mentor,power") / 2;
@@ -605,9 +674,12 @@ static const struct dsps_musb_wrapper am33xx_driver_data = {
 	.coreintr_status	= 0x34,
 	.phy_utmi		= 0xe0,
 	.mode			= 0xe8,
+	.tx_mode		= 0x70,
+	.rx_mode		= 0x74,
 	.reset			= 0,
 	.otg_disable		= 21,
 	.iddig			= 8,
+	.iddig_mux		= 7,
 	.usb_shift		= 0,
 	.usb_mask		= 0x1ff,
 	.usb_bitmap		= (0x1ff << 0),
@@ -628,11 +700,52 @@ static const struct of_device_id musb_dsps_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
 
+#ifdef CONFIG_PM
+static int dsps_suspend(struct device *dev)
+{
+	struct dsps_glue *glue = dev_get_drvdata(dev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	struct musb *musb = platform_get_drvdata(glue->musb);
+	void __iomem *mbase = musb->ctrl_base;
+
+	glue->context.control = dsps_readl(mbase, wrp->control);
+	glue->context.epintr = dsps_readl(mbase, wrp->epintr_set);
+	glue->context.coreintr = dsps_readl(mbase, wrp->coreintr_set);
+	glue->context.phy_utmi = dsps_readl(mbase, wrp->phy_utmi);
+	glue->context.mode = dsps_readl(mbase, wrp->mode);
+	glue->context.tx_mode = dsps_readl(mbase, wrp->tx_mode);
+	glue->context.rx_mode = dsps_readl(mbase, wrp->rx_mode);
+
+	return 0;
+}
+
+static int dsps_resume(struct device *dev)
+{
+	struct dsps_glue *glue = dev_get_drvdata(dev);
+	const struct dsps_musb_wrapper *wrp = glue->wrp;
+	struct musb *musb = platform_get_drvdata(glue->musb);
+	void __iomem *mbase = musb->ctrl_base;
+
+	dsps_writel(mbase, wrp->control, glue->context.control);
+	dsps_writel(mbase, wrp->epintr_set, glue->context.epintr);
+	dsps_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
+	dsps_writel(mbase, wrp->phy_utmi, glue->context.phy_utmi);
+	dsps_writel(mbase, wrp->mode, glue->context.mode);
+	dsps_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
+	dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume);
+
 static struct platform_driver dsps_usbss_driver = {
 	.probe		= dsps_probe,
 	.remove         = dsps_remove,
 	.driver         = {
 		.name   = "musb-dsps",
+		.pm	= &dsps_pm_ops,
 		.of_match_table	= musb_dsps_of_match,
 	},
 };
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 32fb057c03f..d4aa779339f 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1727,14 +1727,14 @@ init_peripheral_ep(struct musb *musb, struct musb_ep *ep, u8 epnum, int is_in)
 	ep->end_point.name = ep->name;
 	INIT_LIST_HEAD(&ep->end_point.ep_list);
 	if (!epnum) {
-		ep->end_point.maxpacket = 64;
+		usb_ep_set_maxpacket_limit(&ep->end_point, 64);
 		ep->end_point.ops = &musb_g_ep0_ops;
 		musb->g.ep0 = &ep->end_point;
 	} else {
 		if (is_in)
-			ep->end_point.maxpacket = hw_ep->max_packet_sz_tx;
+			usb_ep_set_maxpacket_limit(&ep->end_point, hw_ep->max_packet_sz_tx);
 		else
-			ep->end_point.maxpacket = hw_ep->max_packet_sz_rx;
+			usb_ep_set_maxpacket_limit(&ep->end_point, hw_ep->max_packet_sz_rx);
 		ep->end_point.ops = &musb_ep_ops;
 		list_add_tail(&ep->end_point.ep_list, &musb->g.ep_list);
 	}
@@ -2119,7 +2119,15 @@ __acquires(musb->lock)
 	/* Normal reset, as B-Device;
 	 * or else after HNP, as A-Device
 	 */
-	if (devctl & MUSB_DEVCTL_BDEVICE) {
+	if (!musb->g.is_otg) {
+		/* USB device controllers that are not OTG compatible
+		 * may not have DEVCTL register in silicon.
+		 * In that case, do not rely on devctl for setting
+		 * peripheral mode.
+		 */
+		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
+		musb->g.is_a_peripheral = 0;
+	} else if (devctl & MUSB_DEVCTL_BDEVICE) {
 		musb->xceiv->state = OTG_STATE_B_PERIPHERAL;
 		musb->g.is_a_peripheral = 0;
 	} else {
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index e2083757e87..01e7caf6f7b 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2433,6 +2433,8 @@ static int musb_bus_suspend(struct usb_hcd *hcd)
 	struct musb	*musb = hcd_to_musb(hcd);
 	u8		devctl;
 
+	musb_port_suspend(musb, true);
+
 	if (!is_host_active(musb))
 		return 0;
 
@@ -2462,7 +2464,12 @@ static int musb_bus_suspend(struct usb_hcd *hcd)
 
 static int musb_bus_resume(struct usb_hcd *hcd)
 {
-	/* resuming child port does the work */
+	struct musb *musb = hcd_to_musb(hcd);
+
+	if (musb->config &&
+	    musb->config->host_port_deassert_reset_at_resume)
+		musb_port_reset(musb, false);
+
 	return 0;
 }
 
diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h
index 960d73570b2..7bbf01bf4bb 100644
--- a/drivers/usb/musb/musb_host.h
+++ b/drivers/usb/musb/musb_host.h
@@ -92,6 +92,9 @@ extern void musb_host_rx(struct musb *, u8);
 extern void musb_root_disconnect(struct musb *musb);
 extern void musb_host_resume_root_hub(struct musb *musb);
 extern void musb_host_poke_root_hub(struct musb *musb);
+extern void musb_port_suspend(struct musb *musb, bool do_suspend);
+extern void musb_port_reset(struct musb *musb, bool do_reset);
+extern void musb_host_finish_resume(struct work_struct *work);
 #else
 static inline struct musb *hcd_to_musb(struct usb_hcd *hcd)
 {
@@ -121,6 +124,9 @@ static inline void musb_root_disconnect(struct musb *musb)	{}
 static inline void musb_host_resume_root_hub(struct musb *musb)	{}
 static inline void musb_host_poll_rh_status(struct musb *musb)	{}
 static inline void musb_host_poke_root_hub(struct musb *musb)	{}
+static inline void musb_port_suspend(struct musb *musb, bool do_suspend) {}
+static inline void musb_port_reset(struct musb *musb, bool do_reset) {}
+static inline void musb_host_finish_resume(struct work_struct *work) {}
 #endif
 
 struct usb_hcd;
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 9af6bba5eac..966cf95bb45 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -44,7 +44,38 @@
 
 #include "musb_core.h"
 
-static void musb_port_suspend(struct musb *musb, bool do_suspend)
+void musb_host_finish_resume(struct work_struct *work)
+{
+	struct musb *musb;
+	unsigned long flags;
+	u8 power;
+
+	musb = container_of(work, struct musb, finish_resume_work.work);
+
+	spin_lock_irqsave(&musb->lock, flags);
+
+	power = musb_readb(musb->mregs, MUSB_POWER);
+	power &= ~MUSB_POWER_RESUME;
+	dev_dbg(musb->controller, "root port resume stopped, power %02x\n",
+		power);
+	musb_writeb(musb->mregs, MUSB_POWER, power);
+
+	/*
+	 * ISSUE:  DaVinci (RTL 1.300) disconnects after
+	 * resume of high speed peripherals (but not full
+	 * speed ones).
+	 */
+	musb->is_active = 1;
+	musb->port1_status &= ~(USB_PORT_STAT_SUSPEND | MUSB_PORT_STAT_RESUME);
+	musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
+	usb_hcd_poll_rh_status(musb->hcd);
+	/* NOTE: it might really be A_WAIT_BCON ... */
+	musb->xceiv->state = OTG_STATE_A_HOST;
+
+	spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+void musb_port_suspend(struct musb *musb, bool do_suspend)
 {
 	struct usb_otg	*otg = musb->xceiv->otg;
 	u8		power;
@@ -105,11 +136,11 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend)
 
 		/* later, GetPortStatus will stop RESUME signaling */
 		musb->port1_status |= MUSB_PORT_STAT_RESUME;
-		musb->rh_timer = jiffies + msecs_to_jiffies(20);
+		schedule_delayed_work(&musb->finish_resume_work, 20);
 	}
 }
 
-static void musb_port_reset(struct musb *musb, bool do_reset)
+void musb_port_reset(struct musb *musb, bool do_reset)
 {
 	u8		power;
 	void __iomem	*mbase = musb->mregs;
@@ -150,7 +181,7 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
 
 		musb->port1_status |= USB_PORT_STAT_RESET;
 		musb->port1_status &= ~USB_PORT_STAT_ENABLE;
-		musb->rh_timer = jiffies + msecs_to_jiffies(50);
+		schedule_delayed_work(&musb->deassert_reset_work, 50);
 	} else {
 		dev_dbg(musb->controller, "root port reset stopped\n");
 		musb_writeb(mbase, MUSB_POWER,
@@ -325,36 +356,6 @@ int musb_hub_control(
 		if (wIndex != 1)
 			goto error;
 
-		/* finish RESET signaling? */
-		if ((musb->port1_status & USB_PORT_STAT_RESET)
-				&& time_after_eq(jiffies, musb->rh_timer))
-			musb_port_reset(musb, false);
-
-		/* finish RESUME signaling? */
-		if ((musb->port1_status & MUSB_PORT_STAT_RESUME)
-				&& time_after_eq(jiffies, musb->rh_timer)) {
-			u8		power;
-
-			power = musb_readb(musb->mregs, MUSB_POWER);
-			power &= ~MUSB_POWER_RESUME;
-			dev_dbg(musb->controller, "root port resume stopped, power %02x\n",
-					power);
-			musb_writeb(musb->mregs, MUSB_POWER, power);
-
-			/* ISSUE:  DaVinci (RTL 1.300) disconnects after
-			 * resume of high speed peripherals (but not full
-			 * speed ones).
-			 */
-
-			musb->is_active = 1;
-			musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
-					| MUSB_PORT_STAT_RESUME);
-			musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
-			usb_hcd_poll_rh_status(musb->hcd);
-			/* NOTE: it might really be A_WAIT_BCON ... */
-			musb->xceiv->state = OTG_STATE_A_HOST;
-		}
-
 		put_unaligned(cpu_to_le32(musb->port1_status
 					& ~MUSB_PORT_STAT_RESUME),
 				(__le32 *) buf);
diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c
index 3700e971325..9aad00f11bd 100644
--- a/drivers/usb/musb/ux500_dma.c
+++ b/drivers/usb/musb/ux500_dma.c
@@ -336,7 +336,9 @@ static int ux500_dma_controller_start(struct ux500_dma_controller *controller)
 							    data ?
 							    data->dma_filter :
 							    NULL,
-							    param_array[ch_num]);
+							    param_array ?
+							    param_array[ch_num] :
+							    NULL);
 
 			if (!ux500_channel->dma_chan) {
 				ERR("Dma pipe allocation error dir=%d ch=%d\n",