diff options
author | supriya karanth <supriya.karanth@stericsson.com> | 2012-12-06 11:12:48 +0530 |
---|---|---|
committer | Felipe Balbi <balbi@ti.com> | 2013-01-10 14:15:19 +0200 |
commit | bb3a2ef2eb8cfaea335dcb3426350df7f3d48069 (patch) | |
tree | bf1388a03d7533cdabbed072cd6aaa9b09cc3734 /drivers/usb/musb | |
parent | 7e56e621ce9cf4604694c969087456aced338be6 (diff) |
usb: musb: set TXMAXP and AUTOSET for full speed bulk in device mode
The TXMAXP register is not set correctly for full speed bulk case
when the can_bulk_split() is used. Without this PIO transfers will
not take place correctly
The "mult" factor needs to be updated correctly for the
can_bulk_split() case
The AUTOSET bit in the TXCSR is not being set if the "mult"
factor is greater than 0 for the High Bandwidth ISO case.
But the "mult" factor is also greater than 0 in case of Full speed
bulk transfers with the packet splitting in TXMAXP register
Without the AUTOSET the DMA transfers will not progress in mode1
[ balbi@ti.com : add braces to both branches ]
Signed-off-by: supriya karanth <supriya.karanth@stericsson.com>
Signed-off-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers/usb/musb')
-rw-r--r-- | drivers/usb/musb/musb_gadget.c | 22 |
1 files changed, 19 insertions, 3 deletions
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 876787438c2..be18537c5f1 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -408,7 +408,19 @@ static void txstate(struct musb *musb, struct musb_request *req) csr |= (MUSB_TXCSR_DMAENAB | MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE); - if (!musb_ep->hb_mult) + /* + * Enable Autoset according to table + * below + * bulk_split hb_mult Autoset_Enable + * 0 0 Yes(Normal) + * 0 >0 No(High BW ISO) + * 1 0 Yes(HS bulk) + * 1 >0 Yes(FS bulk) + */ + if (!musb_ep->hb_mult || + (musb_ep->hb_mult && + can_bulk_split(musb, + musb_ep->type))) csr |= MUSB_TXCSR_AUTOSET; } csr &= ~MUSB_TXCSR_P_UNDERRUN; @@ -1110,11 +1122,15 @@ static int musb_gadget_enable(struct usb_ep *ep, /* Set TXMAXP with the FIFO size of the endpoint * to disable double buffering mode. */ - if (musb->double_buffer_not_ok) + if (musb->double_buffer_not_ok) { musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); - else + } else { + if (can_bulk_split(musb, musb_ep->type)) + musb_ep->hb_mult = (hw_ep->max_packet_sz_tx / + musb_ep->packet_sz) - 1; musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11)); + } csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG; if (musb_readw(regs, MUSB_TXCSR) |