Merge tag 'xceiv-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

usb: phy: patches for v3.6 merge window

We are starting to support multiple USB phys as
we should thanks for Kishon's work. DeviceTree support
for USB PHYs won't come until discussion with DeviceTree
maintainer is finished.

Together with that series, we have one fix for twl4030
which missed a IRQF_ONESHOT annotation when requesting
a threaded IRQ without a top half handler, and removal
of an unused variable compilation warning to isp1301_omap.

10 files changed, 109 insertions, 74 deletions

diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 9f3eda91ea4..7a95ab87ac0 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -29,6 +29,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
@@ -364,8 +365,8 @@ static int am35x_musb_init(struct musb *musb)
 		return -ENODEV;
 
 	usb_nop_xceiv_register();
-	musb->xceiv = usb_get_transceiver();
-	if (!musb->xceiv)
+	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv))
 		return -ENODEV;
 
 	if (is_host_enabled(musb))
@@ -406,7 +407,7 @@ static int am35x_musb_exit(struct musb *musb)
 	if (data->set_phy_power)
 		data->set_phy_power(0);
 
-	usb_put_transceiver(musb->xceiv);
+	usb_put_phy(musb->xceiv);
 	usb_nop_xceiv_unregister();
 
 	return 0;
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index a087ed6c3be..428e6aa3e78 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/prefetch.h>
@@ -415,8 +416,8 @@ static int bfin_musb_init(struct musb *musb)
 	gpio_direction_output(musb->config->gpio_vrsel, 0);
 
 	usb_nop_xceiv_register();
-	musb->xceiv = usb_get_transceiver();
-	if (!musb->xceiv) {
+	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		gpio_free(musb->config->gpio_vrsel);
 		return -ENODEV;
 	}
@@ -440,7 +441,7 @@ static int bfin_musb_exit(struct musb *musb)
 {
 	gpio_free(musb->config->gpio_vrsel);
 
-	usb_put_transceiver(musb->xceiv);
+	usb_put_phy(musb->xceiv);
 	usb_nop_xceiv_unregister();
 	return 0;
 }
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 8bd9566f3fb..0f9fcec4e1d 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -29,6 +29,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
@@ -425,8 +426,8 @@ static int da8xx_musb_init(struct musb *musb)
 		goto fail;
 
 	usb_nop_xceiv_register();
-	musb->xceiv = usb_get_transceiver();
-	if (!musb->xceiv)
+	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv))
 		goto fail;
 
 	if (is_host_enabled(musb))
@@ -458,7 +459,7 @@ static int da8xx_musb_exit(struct musb *musb)
 
 	phy_off();
 
-	usb_put_transceiver(musb->xceiv);
+	usb_put_phy(musb->xceiv);
 	usb_nop_xceiv_unregister();
 
 	return 0;
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 9d63ba4d10d..472c8b42d38 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -28,6 +28,7 @@
 #include <linux/list.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
@@ -385,8 +386,8 @@ static int davinci_musb_init(struct musb *musb)
 	u32		revision;
 
 	usb_nop_xceiv_register();
-	musb->xceiv = usb_get_transceiver();
-	if (!musb->xceiv)
+	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv))
 		goto unregister;
 
 	musb->mregs += DAVINCI_BASE_OFFSET;
@@ -444,7 +445,7 @@ static int davinci_musb_init(struct musb *musb)
 	return 0;
 
 fail:
-	usb_put_transceiver(musb->xceiv);
+	usb_put_phy(musb->xceiv);
 unregister:
 	usb_nop_xceiv_unregister();
 	return -ENODEV;
@@ -494,7 +495,7 @@ static int davinci_musb_exit(struct musb *musb)
 
 	phy_off();
 
-	usb_put_transceiver(musb->xceiv);
+	usb_put_phy(musb->xceiv);
 	usb_nop_xceiv_unregister();
 
 	return 0;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index db3dff854b7..26f1befb489 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1909,7 +1909,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	/* The musb_platform_init() call:
 	 *   - adjusts musb->mregs and musb->isr if needed,
 	 *   - may initialize an integrated tranceiver
-	 *   - initializes musb->xceiv, usually by otg_get_transceiver()
+	 *   - initializes musb->xceiv, usually by otg_get_phy()
 	 *   - stops powering VBUS
 	 *
 	 * There are various transceiver configurations.  Blackfin,
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index f4a40f001c8..dbcdeea30f0 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -327,7 +327,6 @@ struct musb {
 
 	irqreturn_t		(*isr)(int, void *);
 	struct work_struct	irq_work;
-	struct work_struct	otg_notifier_work;
 	u16			hwvers;
 
 /* this hub status bit is reserved by USB 2.0 and not seen by usbcore */
@@ -373,7 +372,6 @@ struct musb {
 	u16			int_tx;
 
 	struct usb_phy		*xceiv;
-	u8			xceiv_event;
 
 	int nIrq;
 	unsigned		irq_wake:1;
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 23db42db761..217808d9fbe 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -31,6 +31,7 @@
 
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/pm_runtime.h>
@@ -376,8 +377,8 @@ static int dsps_musb_init(struct musb *musb)
 
 	/* NOP driver needs change if supporting dual instance */
 	usb_nop_xceiv_register();
-	musb->xceiv = usb_get_transceiver();
-	if (!musb->xceiv)
+	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv))
 		return -ENODEV;
 
 	/* Returns zero if e.g. not clocked */
@@ -409,7 +410,7 @@ static int dsps_musb_init(struct musb *musb)
 
 	return 0;
 err0:
-	usb_put_transceiver(musb->xceiv);
+	usb_put_phy(musb->xceiv);
 	usb_nop_xceiv_unregister();
 	return status;
 }
@@ -430,7 +431,7 @@ static int dsps_musb_exit(struct musb *musb)
 		data->set_phy_power(0);
 
 	/* NOP driver needs change if supporting dual instance */
-	usb_put_transceiver(musb->xceiv);
+	usb_put_phy(musb->xceiv);
 	usb_nop_xceiv_unregister();
 
 	return 0;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index c7785e81254..5fdb9da8dd5 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -34,6 +34,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/pm_runtime.h>
 #include <linux/err.h>
+#include <linux/usb/musb-omap.h>
 
 #include "musb_core.h"
 #include "omap2430.h"
@@ -41,9 +42,13 @@
 struct omap2430_glue {
 	struct device		*dev;
 	struct platform_device	*musb;
+	enum omap_musb_vbus_id_status status;
+	struct work_struct	omap_musb_mailbox_work;
 };
 #define glue_to_musb(g)		platform_get_drvdata(g->musb)
 
+struct omap2430_glue		*_glue;
+
 static struct timer_list musb_idle_timer;
 
 static void musb_do_idle(unsigned long _musb)
@@ -223,50 +228,63 @@ static inline void omap2430_low_level_init(struct musb *musb)
 	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
 }
 
-static int musb_otg_notifications(struct notifier_block *nb,
-		unsigned long event, void *unused)
+void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
 {
-	struct musb	*musb = container_of(nb, struct musb, nb);
+	struct omap2430_glue	*glue = _glue;
+	struct musb		*musb = glue_to_musb(glue);
 
-	musb->xceiv_event = event;
-	schedule_work(&musb->otg_notifier_work);
+	glue->status = status;
+	if (!musb) {
+		dev_err(glue->dev, "musb core is not yet ready\n");
+		return;
+	}
 
-	return NOTIFY_OK;
+	schedule_work(&glue->omap_musb_mailbox_work);
 }
+EXPORT_SYMBOL_GPL(omap_musb_mailbox);
 
-static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
+static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 {
-	struct musb *musb = container_of(data_notifier_work, struct musb, otg_notifier_work);
+	struct musb *musb = glue_to_musb(glue);
 	struct device *dev = musb->controller;
 	struct musb_hdrc_platform_data *pdata = dev->platform_data;
 	struct omap_musb_board_data *data = pdata->board_data;
+	struct usb_otg *otg = musb->xceiv->otg;
 
-	switch (musb->xceiv_event) {
-	case USB_EVENT_ID:
-		dev_dbg(musb->controller, "ID GND\n");
+	switch (glue->status) {
+	case OMAP_MUSB_ID_GROUND:
+		dev_dbg(dev, "ID GND\n");
 
+		otg->default_a = true;
+		musb->xceiv->state = OTG_STATE_A_IDLE;
+		musb->xceiv->last_event = USB_EVENT_ID;
 		if (!is_otg_enabled(musb) || musb->gadget_driver) {
-			pm_runtime_get_sync(musb->controller);
+			pm_runtime_get_sync(dev);
 			usb_phy_init(musb->xceiv);
 			omap2430_musb_set_vbus(musb, 1);
 		}
 		break;
 
-	case USB_EVENT_VBUS:
-		dev_dbg(musb->controller, "VBUS Connect\n");
+	case OMAP_MUSB_VBUS_VALID:
+		dev_dbg(dev, "VBUS Connect\n");
 
+		otg->default_a = false;
+		musb->xceiv->state = OTG_STATE_B_IDLE;
+		musb->xceiv->last_event = USB_EVENT_VBUS;
 		if (musb->gadget_driver)
-			pm_runtime_get_sync(musb->controller);
+			pm_runtime_get_sync(dev);
 		usb_phy_init(musb->xceiv);
 		break;
 
-	case USB_EVENT_NONE:
-		dev_dbg(musb->controller, "VBUS Disconnect\n");
+	case OMAP_MUSB_ID_FLOAT:
+	case OMAP_MUSB_VBUS_OFF:
+		dev_dbg(dev, "VBUS Disconnect\n");
 
+		musb->xceiv->last_event = USB_EVENT_NONE;
 		if (is_otg_enabled(musb) || is_peripheral_enabled(musb))
 			if (musb->gadget_driver) {
-				pm_runtime_mark_last_busy(musb->controller);
-				pm_runtime_put_autosuspend(musb->controller);
+				pm_runtime_mark_last_busy(dev);
+				pm_runtime_put_autosuspend(dev);
 			}
 
 		if (data->interface_type == MUSB_INTERFACE_UTMI) {
@@ -276,15 +294,24 @@ static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
 		usb_phy_shutdown(musb->xceiv);
 		break;
 	default:
-		dev_dbg(musb->controller, "ID float\n");
+		dev_dbg(dev, "ID float\n");
 	}
 }
 
+
+static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
+{
+	struct omap2430_glue *glue = container_of(mailbox_work,
+				struct omap2430_glue, omap_musb_mailbox_work);
+	omap_musb_set_mailbox(glue);
+}
+
 static int omap2430_musb_init(struct musb *musb)
 {
 	u32 l;
 	int status = 0;
 	struct device *dev = musb->controller;
+	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 	struct musb_hdrc_platform_data *plat = dev->platform_data;
 	struct omap_musb_board_data *data = plat->board_data;
 
@@ -292,14 +319,12 @@ static int omap2430_musb_init(struct musb *musb)
 	 * up through ULPI.  TWL4030-family PMICs include one,
 	 * which needs a driver, drivers aren't always needed.
 	 */
-	musb->xceiv = usb_get_transceiver();
-	if (!musb->xceiv) {
+	musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		pr_err("HS USB OTG: no transceiver configured\n");
 		return -ENODEV;
 	}
 
-	INIT_WORK(&musb->otg_notifier_work, musb_otg_notifier_work);
-
 	status = pm_runtime_get_sync(dev);
 	if (status < 0) {
 		dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
@@ -326,14 +351,11 @@ static int omap2430_musb_init(struct musb *musb)
 			musb_readl(musb->mregs, OTG_INTERFSEL),
 			musb_readl(musb->mregs, OTG_SIMENABLE));
 
-	musb->nb.notifier_call = musb_otg_notifications;
-	status = usb_register_notifier(musb->xceiv, &musb->nb);
-
-	if (status)
-		dev_dbg(musb->controller, "notification register failed\n");
-
 	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
 
+	if (glue->status != OMAP_MUSB_UNKNOWN)
+		omap_musb_set_mailbox(glue);
+
 	pm_runtime_put_noidle(musb->controller);
 	return 0;
 
@@ -346,12 +368,13 @@ static void omap2430_musb_enable(struct musb *musb)
 	u8		devctl;
 	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 	struct device *dev = musb->controller;
+	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 	struct musb_hdrc_platform_data *pdata = dev->platform_data;
 	struct omap_musb_board_data *data = pdata->board_data;
 
-	switch (musb->xceiv->last_event) {
+	switch (glue->status) {
 
-	case USB_EVENT_ID:
+	case OMAP_MUSB_ID_GROUND:
 		usb_phy_init(musb->xceiv);
 		if (data->interface_type != MUSB_INTERFACE_UTMI)
 			break;
@@ -370,7 +393,7 @@ static void omap2430_musb_enable(struct musb *musb)
 		}
 		break;
 
-	case USB_EVENT_VBUS:
+	case OMAP_MUSB_VBUS_VALID:
 		usb_phy_init(musb->xceiv);
 		break;
 
@@ -381,17 +404,18 @@ static void omap2430_musb_enable(struct musb *musb)
 
 static void omap2430_musb_disable(struct musb *musb)
 {
-	if (musb->xceiv->last_event)
+	struct device *dev = musb->controller;
+	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
+
+	if (glue->status != OMAP_MUSB_UNKNOWN)
 		usb_phy_shutdown(musb->xceiv);
 }
 
 static int omap2430_musb_exit(struct musb *musb)
 {
 	del_timer_sync(&musb_idle_timer);
-	cancel_work_sync(&musb->otg_notifier_work);
 
 	omap2430_low_level_exit(musb);
-	usb_put_transceiver(musb->xceiv);
 
 	return 0;
 }
@@ -418,7 +442,7 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
 	struct omap2430_glue		*glue;
 	int				ret = -ENOMEM;
 
-	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
 	if (!glue) {
 		dev_err(&pdev->dev, "failed to allocate glue context\n");
 		goto err0;
@@ -427,7 +451,7 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
 	musb = platform_device_alloc("musb-hdrc", -1);
 	if (!musb) {
 		dev_err(&pdev->dev, "failed to allocate musb device\n");
-		goto err1;
+		goto err0;
 	}
 
 	musb->dev.parent		= &pdev->dev;
@@ -436,22 +460,31 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
 
 	glue->dev			= &pdev->dev;
 	glue->musb			= musb;
+	glue->status			= OMAP_MUSB_UNKNOWN;
 
 	pdata->platform_ops		= &omap2430_ops;
 
 	platform_set_drvdata(pdev, glue);
 
+	/*
+	 * REVISIT if we ever have two instances of the wrapper, we will be
+	 * in big trouble
+	 */
+	_glue	= glue;
+
+	INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work);
+
 	ret = platform_device_add_resources(musb, pdev->resource,
 			pdev->num_resources);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add resources\n");
-		goto err2;
+		goto err1;
 	}
 
 	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add platform_data\n");
-		goto err2;
+		goto err1;
 	}
 
 	pm_runtime_enable(&pdev->dev);
@@ -459,16 +492,13 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
 	ret = platform_device_add(musb);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register musb device\n");
-		goto err2;
+		goto err1;
 	}
 
 	return 0;
 
-err2:
-	platform_device_put(musb);
-
 err1:
-	kfree(glue);
+	platform_device_put(musb);
 
 err0:
 	return ret;
@@ -478,9 +508,9 @@ static int __devexit omap2430_remove(struct platform_device *pdev)
 {
 	struct omap2430_glue		*glue = platform_get_drvdata(pdev);
 
+	cancel_work_sync(&glue->omap_musb_mailbox_work);
 	platform_device_del(glue->musb);
 	platform_device_put(glue->musb);
-	kfree(glue);
 
 	return 0;
 }
@@ -546,7 +576,7 @@ static int __init omap2430_init(void)
 {
 	return platform_driver_register(&omap2430_driver);
 }
-module_init(omap2430_init);
+subsys_initcall(omap2430_init);
 
 static void __exit omap2430_exit(void)
 {
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index de1355946a8..1a1bd9cf40c 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
+#include <linux/err.h>
 #include <linux/init.h>
 #include <linux/prefetch.h>
 #include <linux/usb.h>
@@ -1078,8 +1079,8 @@ static int tusb_musb_init(struct musb *musb)
 	int			ret;
 
 	usb_nop_xceiv_register();
-	musb->xceiv = usb_get_transceiver();
-	if (!musb->xceiv)
+	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv))
 		return -ENODEV;
 
 	pdev = to_platform_device(musb->controller);
@@ -1130,7 +1131,7 @@ done:
 		if (sync)
 			iounmap(sync);
 
-		usb_put_transceiver(musb->xceiv);
+		usb_put_phy(musb->xceiv);
 		usb_nop_xceiv_unregister();
 	}
 	return ret;
@@ -1146,7 +1147,7 @@ static int tusb_musb_exit(struct musb *musb)
 
 	iounmap(musb->sync_va);
 
-	usb_put_transceiver(musb->xceiv);
+	usb_put_phy(musb->xceiv);
 	usb_nop_xceiv_unregister();
 	return 0;
 }
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index aa09dd417b9..a8c0fadce1b 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
@@ -37,8 +38,8 @@ struct ux500_glue {
 
 static int ux500_musb_init(struct musb *musb)
 {
-	musb->xceiv = usb_get_transceiver();
-	if (!musb->xceiv) {
+	musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR_OR_NULL(musb->xceiv)) {
 		pr_err("HS USB OTG: no transceiver configured\n");
 		return -ENODEV;
 	}
@@ -48,7 +49,7 @@ static int ux500_musb_init(struct musb *musb)
 
 static int ux500_musb_exit(struct musb *musb)
 {
-	usb_put_transceiver(musb->xceiv);
+	usb_put_phy(musb->xceiv);
 
 	return 0;
 }