diff options
| author | Felipe Balbi <balbi@ti.com> | 2013-10-29 12:17:16 -0500 |
|---|---|---|
| committer | Felipe Balbi <balbi@ti.com> | 2013-11-26 10:35:14 -0600 |
| commit | 943c13971c08ddeb06f4cb9dea1addb76f6b4423 (patch) | |
| tree | 0712df52363977e91d0f4d875c51e7e7e885358d /drivers/usb/musb | |
| parent | 989c78dd56307c85f710533130a2a464f6f3c5ae (diff) | |
usb: musb: dsps: implement ->set_mode()
this will let us support broken designs such
as AM335x EVM SK where ID pin isn't routed
anywhere on a host port.
With this we can toggle internal IDDIG signal
and make sure MUSB goes into host mode as
necessary.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers/usb/musb')
| -rw-r--r-- | drivers/usb/musb/musb_dsps.c | 51 |
1 files changed, 51 insertions, 0 deletions
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 1901f6fe580..ce7ec014a12 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -106,6 +106,7 @@ struct dsps_musb_wrapper { /* bit positions for mode */ unsigned iddig:5; + unsigned iddig_mux:5; /* miscellaneous stuff */ u8 poll_seconds; }; @@ -406,6 +407,54 @@ static int dsps_musb_exit(struct musb *musb) return 0; } +static int dsps_musb_set_mode(struct musb *musb, u8 mode) +{ + struct device *dev = musb->controller; + struct dsps_glue *glue = dev_get_drvdata(dev->parent); + const struct dsps_musb_wrapper *wrp = glue->wrp; + void __iomem *ctrl_base = musb->ctrl_base; + void __iomem *base = musb->mregs; + u32 reg; + + reg = dsps_readl(base, wrp->mode); + + switch (mode) { + case MUSB_HOST: + reg &= ~(1 << wrp->iddig); + + /* + * if we're setting mode to host-only or device-only, we're + * going to ignore whatever the PHY sends us and just force + * ID pin status by SW + */ + reg |= (1 << wrp->iddig_mux); + + dsps_writel(base, wrp->mode, reg); + dsps_writel(ctrl_base, wrp->phy_utmi, 0x02); + break; + case MUSB_PERIPHERAL: + reg |= (1 << wrp->iddig); + + /* + * if we're setting mode to host-only or device-only, we're + * going to ignore whatever the PHY sends us and just force + * ID pin status by SW + */ + reg |= (1 << wrp->iddig_mux); + + dsps_writel(base, wrp->mode, reg); + break; + case MUSB_OTG: + dsps_writel(base, wrp->phy_utmi, 0x02); + break; + default: + dev_err(glue->dev, "unsupported mode %d\n", mode); + return -EINVAL; + } + + return 0; +} + static struct musb_platform_ops dsps_ops = { .init = dsps_musb_init, .exit = dsps_musb_exit, @@ -414,6 +463,7 @@ static struct musb_platform_ops dsps_ops = { .disable = dsps_musb_disable, .try_idle = dsps_musb_try_idle, + .set_mode = dsps_musb_set_mode, }; static u64 musb_dmamask = DMA_BIT_MASK(32); @@ -608,6 +658,7 @@ static const struct dsps_musb_wrapper am33xx_driver_data = { .reset = 0, .otg_disable = 21, .iddig = 8, + .iddig_mux = 7, .usb_shift = 0, .usb_mask = 0x1ff, .usb_bitmap = (0x1ff << 0), |