Merge tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB pull request for 3.10-rc1.

  Lots of USB patches here, the majority being USB gadget changes and
  USB-serial driver cleanups, the rest being ARM build fixes / cleanups,
  and individual driver updates.  We also finally got some chipidea
  fixes, which have been delayed for a number of kernel releases, as the
  maintainer has now reappeared.

  All of these have been in linux-next for a while"

* tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits)
  USB: ehci-msm: USB_MSM_OTG needs USB_PHY
  USB: OHCI: avoid conflicting platform drivers
  USB: OMAP: ISP1301 needs USB_PHY
  USB: lpc32xx: ISP1301 needs USB_PHY
  USB: ftdi_sio: enable two UART ports on ST Microconnect Lite
  usb: phy: tegra: don't call into tegra-ehci directly
  usb: phy: phy core cannot yet be a module
  USB: Fix initconst in ehci driver
  usb-storage: CY7C68300A chips do not support Cypress ATACB
  USB: serial: option: Added support Olivetti Olicard 145
  USB: ftdi_sio: correct ST Micro Connect Lite PIDs
  ARM: mxs_defconfig: add CONFIG_USB_PHY
  ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY
  usb: phy: remove exported function from __init section
  usb: gadget: zero: put function instances on unbind
  usb: gadget: f_sourcesink.c: correct a copy-paste misnomer
  usb: gadget: cdc2: fix error return code in cdc_do_config()
  usb: gadget: multi: fix error return code in rndis_do_config()
  usb: gadget: f_obex: fix error return code in obex_bind()
  USB: storage: convert to use module_usb_driver()
  ...

1 files changed, 0 insertions, 141 deletions

diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
deleted file mode 100644
index 37962c99ff1..00000000000
--- a/drivers/usb/otg/Kconfig
+++ /dev/null
@@ -1,141 +0,0 @@
-#
-# USB OTG infrastructure may be needed for peripheral-only, host-only,
-# or OTG-capable configurations when OTG transceivers or controllers
-# are used.
-#
-
-comment "OTG and related infrastructure"
-
-config USB_OTG_UTILS
-	bool
-	help
-	  Select this to make sure the build includes objects from
-	  the OTG infrastructure directory.
-
-if USB || USB_GADGET
-
-#
-# USB Transceiver Drivers
-#
-config USB_GPIO_VBUS
-	tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
-	depends on GENERIC_GPIO
-	select USB_OTG_UTILS
-	help
-	  Provides simple GPIO VBUS sensing for controllers with an
-	  internal transceiver via the usb_phy interface, and
-	  optionally control of a D+ pullup GPIO as well as a VBUS
-	  current limit regulator.
-
-config ISP1301_OMAP
-	tristate "Philips ISP1301 with OMAP OTG"
-	depends on I2C && ARCH_OMAP_OTG
-	select USB_OTG_UTILS
-	help
-	  If you say yes here you get support for the Philips ISP1301
-	  USB-On-The-Go transceiver working with the OMAP OTG controller.
-	  The ISP1301 is a full speed USB  transceiver which is used in
-	  products including H2, H3, and H4 development boards for Texas
-	  Instruments OMAP processors.
-
-	  This driver can also be built as a module.  If so, the module
-	  will be called isp1301_omap.
-
-config USB_ULPI
-	bool "Generic ULPI Transceiver Driver"
-	depends on ARM
-	select USB_OTG_UTILS
-	help
-	  Enable this to support ULPI connected USB OTG transceivers which
-	  are likely found on embedded boards.
-
-config USB_ULPI_VIEWPORT
-	bool
-	depends on USB_ULPI
-	help
-	  Provides read/write operations to the ULPI phy register set for
-	  controllers with a viewport register (e.g. Chipidea/ARC controllers).
-
-config TWL4030_USB
-	tristate "TWL4030 USB Transceiver Driver"
-	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
-	select USB_OTG_UTILS
-	help
-	  Enable this to support the USB OTG transceiver on TWL4030
-	  family chips (including the TWL5030 and TPS659x0 devices).
-	  This transceiver supports high and full speed devices plus,
-	  in host mode, low speed.
-
-config TWL6030_USB
-	tristate "TWL6030 USB Transceiver Driver"
-	depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
-	select USB_OTG_UTILS
-	help
-	  Enable this to support the USB OTG transceiver on TWL6030
-	  family chips. This TWL6030 transceiver has the VBUS and ID GND
-	  and OTG SRP events capabilities. For all other transceiver functionality
-	  UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs
-	  are hooked to this driver through platform_data structure.
-	  The definition of internal PHY APIs are in the mach-omap2 layer.
-
-config NOP_USB_XCEIV
-	tristate "NOP USB Transceiver Driver"
-	select USB_OTG_UTILS
-	help
-	  This driver is to be used by all the usb transceiver which are either
-	  built-in with usb ip or which are autonomous and doesn't require any
-	  phy programming such as ISP1x04 etc.
-
-config USB_MSM_OTG
-	tristate "OTG support for Qualcomm on-chip USB controller"
-	depends on (USB || USB_GADGET) && ARCH_MSM
-	select USB_OTG_UTILS
-	help
-	  Enable this to support the USB OTG transceiver on MSM chips. It
-	  handles PHY initialization, clock management, and workarounds
-	  required after resetting the hardware and power management.
-	  This driver is required even for peripheral only or host only
-	  mode configurations.
-	  This driver is not supported on boards like trout which
-	  has an external PHY.
-
-config AB8500_USB
-	tristate "AB8500 USB Transceiver Driver"
-	depends on AB8500_CORE
-	select USB_OTG_UTILS
-	help
-	  Enable this to support the USB OTG transceiver in AB8500 chip.
-	  This transceiver supports high and full speed devices plus,
-	  in host mode, low speed.
-
-config FSL_USB2_OTG
-	bool "Freescale USB OTG Transceiver Driver"
-	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND
-	select USB_OTG
-	select USB_OTG_UTILS
-	help
-	  Enable this to support Freescale USB OTG transceiver.
-
-config USB_MXS_PHY
-	tristate "Freescale MXS USB PHY support"
-	depends on ARCH_MXC || ARCH_MXS
-	select STMP_DEVICE
-	select USB_OTG_UTILS
-	help
-	  Enable this to support the Freescale MXS USB PHY.
-
-	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
-
-config USB_MV_OTG
-	tristate "Marvell USB OTG support"
-	depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
-	select USB_OTG
-	select USB_OTG_UTILS
-	help
-	  Say Y here if you want to build Marvell USB OTG transciever
-	  driver in kernel (including PXA and MMP series). This driver
-	  implements role switch between EHCI host driver and gadget driver.
-
-	  To compile this driver as a module, choose M here.
-
-endif # USB || OTG