Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits)
  USB: Add support for SuperSpeed isoc endpoints
  xhci: Clean up cycle bit math used during stalls.
  xhci: Fix cycle bit calculation during stall handling.
  xhci: Update internal dequeue pointers after stalls.
  USB: Disable auto-suspend for USB 3.0 hubs.
  USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol.
  xhci: Return canceled URBs immediately when host is halted.
  xhci: Fixes for suspend/resume of shared HCDs.
  xhci: Fix re-init on power loss after resume.
  xhci: Make roothub functions deal with device removal.
  xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports.
  xhci: Return a USB 3.0 hub descriptor for USB3 roothub.
  xhci: Register second xHCI roothub.
  xhci: Change xhci_find_slot_id_by_port() API.
  xhci: Refactor bus suspend state into a struct.
  xhci: Index with a port array instead of PORTSC addresses.
  USB: Set usb_hcd->state and flags for shared roothubs.
  usb: Make core allocate resources per PCI-device.
  usb: Store bus type in usb_hcd, not in driver flags.
  usb: Change usb_hcd->bandwidth_mutex to a pointer.
  ...

1 files changed, 11 insertions, 37 deletions

diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
index 9fea48264fa..7f9b8cd4514 100644
--- a/drivers/usb/otg/langwell_otg.c
+++ b/drivers/usb/otg/langwell_otg.c
@@ -174,50 +174,24 @@ static int langwell_otg_set_power(struct otg_transceiver *otg,
 	return 0;
 }
 
-/* A-device drives vbus, controlled through PMIC CHRGCNTL register*/
+/* A-device drives vbus, controlled through IPC commands */
 static int langwell_otg_set_vbus(struct otg_transceiver *otg, bool enabled)
 {
 	struct langwell_otg		*lnw = the_transceiver;
-	u8 r;
+	u8				sub_id;
 
 	dev_dbg(lnw->dev, "%s <--- %s\n", __func__, enabled ? "on" : "off");
 
-	/* FIXME: surely we should cache this on the first read. If not use
-	   readv to avoid two transactions */
-	if (intel_scu_ipc_ioread8(0x00, &r) < 0) {
-		dev_dbg(lnw->dev, "Failed to read PMIC register 0xD2");
-		return -EBUSY;
-	}
-	if ((r & 0x03) != 0x02) {
-		dev_dbg(lnw->dev, "not NEC PMIC attached\n");
-		return -EBUSY;
-	}
-
-	if (intel_scu_ipc_ioread8(0x20, &r) < 0) {
-		dev_dbg(lnw->dev, "Failed to read PMIC register 0xD2");
-		return -EBUSY;
-	}
-
-	if ((r & 0x20) == 0) {
-		dev_dbg(lnw->dev, "no battery attached\n");
-		return -EBUSY;
-	}
+	if (enabled)
+		sub_id = 0x8; /* Turn on the VBus */
+	else
+		sub_id = 0x9; /* Turn off the VBus */
 
-	/* Workaround for battery attachment issue */
-	if (r == 0x34) {
-		dev_dbg(lnw->dev, "no battery attached on SH\n");
+	if (intel_scu_ipc_simple_command(0xef, sub_id)) {
+		dev_dbg(lnw->dev, "Failed to set Vbus via IPC commands\n");
 		return -EBUSY;
 	}
 
-	dev_dbg(lnw->dev, "battery attached. 2 reg = %x\n", r);
-
-	/* workaround: FW detect writing 0x20/0xc0 to d4 event.
-	 * this is only for NEC PMIC.
-	 */
-
-	if (intel_scu_ipc_iowrite8(0xD4, enabled ? 0x20 : 0xC0))
-		dev_dbg(lnw->dev, "Failed to write PMIC.\n");
-
 	dev_dbg(lnw->dev, "%s --->\n", __func__);
 
 	return 0;
@@ -394,14 +368,14 @@ static void langwell_otg_phy_low_power(int on)
 	dev_dbg(lnw->dev, "%s <--- done\n", __func__);
 }
 
-/* After drv vbus, add 2 ms delay to set PHCD */
+/* After drv vbus, add 5 ms delay to set PHCD */
 static void langwell_otg_phy_low_power_wait(int on)
 {
 	struct langwell_otg	*lnw = the_transceiver;
 
-	dev_dbg(lnw->dev, "add 2ms delay before programing PHCD\n");
+	dev_dbg(lnw->dev, "add 5ms delay before programing PHCD\n");
 
-	mdelay(2);
+	mdelay(5);
 	langwell_otg_phy_low_power(on);
 }