Merge branch 'linus' into core/iommu

Conflicts:
	arch/x86/Kconfig

5 files changed, 285 insertions, 21 deletions

diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index ee55b449ffd..aa884d072f0 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -43,7 +43,7 @@ config ISP1301_OMAP
 
 config TWL4030_USB
 	tristate "TWL4030 USB Transceiver Driver"
-	depends on TWL4030_CORE
+	depends on TWL4030_CORE && REGULATOR_TWL4030
 	select USB_OTG_UTILS
 	help
 	  Enable this to support the USB OTG transceiver on TWL4030
@@ -51,4 +51,12 @@ config TWL4030_USB
 	  This transceiver supports high and full speed devices plus,
 	  in host mode, low speed.
 
+config NOP_USB_XCEIV
+	tristate "NOP USB Transceiver Driver"
+	select USB_OTG_UTILS
+	help
+	 this driver is to be used by all the usb transceiver which are either
+	 built-in with usb ip or which are autonomous and doesn't require any
+	 phy programming such as ISP1x04 etc.
+
 endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index d73c7cf5e2f..20816785652 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_OTG_UTILS)	+= otg.o
 obj-$(CONFIG_USB_GPIO_VBUS)	+= gpio_vbus.o
 obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
 obj-$(CONFIG_TWL4030_USB)	+= twl4030-usb.o
+obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o
 
 ccflags-$(CONFIG_USB_DEBUG)	+= -DDEBUG
 ccflags-$(CONFIG_USB_GADGET_DEBUG) += -DDEBUG
diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c
index 63a6036f04b..1c26c94513e 100644
--- a/drivers/usb/otg/gpio_vbus.c
+++ b/drivers/usb/otg/gpio_vbus.c
@@ -13,6 +13,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/usb.h>
+#include <linux/workqueue.h>
 
 #include <linux/regulator/consumer.h>
 
@@ -34,6 +35,7 @@ struct gpio_vbus_data {
 	struct regulator       *vbus_draw;
 	int			vbus_draw_enabled;
 	unsigned		mA;
+	struct work_struct	work;
 };
 
 
@@ -76,24 +78,26 @@ static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA)
 	gpio_vbus->mA = mA;
 }
 
-/* VBUS change IRQ handler */
-static irqreturn_t gpio_vbus_irq(int irq, void *data)
+static int is_vbus_powered(struct gpio_vbus_mach_info *pdata)
 {
-	struct platform_device *pdev = data;
-	struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data;
-	struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
-	int gpio, vbus;
+	int vbus;
 
 	vbus = gpio_get_value(pdata->gpio_vbus);
 	if (pdata->gpio_vbus_inverted)
 		vbus = !vbus;
 
-	dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n",
-		vbus ? "supplied" : "inactive",
-		gpio_vbus->otg.gadget ? gpio_vbus->otg.gadget->name : "none");
+	return vbus;
+}
+
+static void gpio_vbus_work(struct work_struct *work)
+{
+	struct gpio_vbus_data *gpio_vbus =
+		container_of(work, struct gpio_vbus_data, work);
+	struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data;
+	int gpio;
 
 	if (!gpio_vbus->otg.gadget)
-		return IRQ_HANDLED;
+		return;
 
 	/* Peripheral controllers which manage the pullup themselves won't have
 	 * gpio_pullup configured here.  If it's configured here, we'll do what
@@ -101,7 +105,7 @@ static irqreturn_t gpio_vbus_irq(int irq, void *data)
 	 * that may complicate usb_gadget_{,dis}connect() support.
 	 */
 	gpio = pdata->gpio_pullup;
-	if (vbus) {
+	if (is_vbus_powered(pdata)) {
 		gpio_vbus->otg.state = OTG_STATE_B_PERIPHERAL;
 		usb_gadget_vbus_connect(gpio_vbus->otg.gadget);
 
@@ -121,6 +125,21 @@ static irqreturn_t gpio_vbus_irq(int irq, void *data)
 		usb_gadget_vbus_disconnect(gpio_vbus->otg.gadget);
 		gpio_vbus->otg.state = OTG_STATE_B_IDLE;
 	}
+}
+
+/* VBUS change IRQ handler */
+static irqreturn_t gpio_vbus_irq(int irq, void *data)
+{
+	struct platform_device *pdev = data;
+	struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data;
+	struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
+
+	dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n",
+		is_vbus_powered(pdata) ? "supplied" : "inactive",
+		gpio_vbus->otg.gadget ? gpio_vbus->otg.gadget->name : "none");
+
+	if (gpio_vbus->otg.gadget)
+		schedule_work(&gpio_vbus->work);
 
 	return IRQ_HANDLED;
 }
@@ -257,6 +276,7 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
 			irq, err);
 		goto err_irq;
 	}
+	INIT_WORK(&gpio_vbus->work, gpio_vbus_work);
 
 	/* only active when a gadget is registered */
 	err = otg_set_transceiver(&gpio_vbus->otg);
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
new file mode 100644
index 00000000000..4b933f646f2
--- /dev/null
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -0,0 +1,180 @@
+/*
+ * drivers/usb/otg/nop-usb-xceiv.c
+ *
+ * NOP USB transceiver for all USB transceiver which are either built-in
+ * into USB IP or which are mostly autonomous.
+ *
+ * Copyright (C) 2009 Texas Instruments Inc
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Current status:
+ * 	this is to add "nop" transceiver for all those phy which is
+ * 	autonomous such as isp1504 etc.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/otg.h>
+
+struct nop_usb_xceiv {
+	struct otg_transceiver	otg;
+	struct device		*dev;
+};
+
+static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+
+static struct platform_device nop_xceiv_device = {
+	.name           = "nop_usb_xceiv",
+	.id             = -1,
+	.dev = {
+		.dma_mask               = &nop_xceiv_dmamask,
+		.coherent_dma_mask      = DMA_32BIT_MASK,
+		.platform_data          = NULL,
+	},
+};
+
+void usb_nop_xceiv_register(void)
+{
+	if (platform_device_register(&nop_xceiv_device) < 0) {
+		printk(KERN_ERR "Unable to register usb nop transceiver\n");
+		return;
+	}
+}
+
+void usb_nop_xceiv_unregister(void)
+{
+	platform_device_unregister(&nop_xceiv_device);
+}
+
+static inline struct nop_usb_xceiv *xceiv_to_nop(struct otg_transceiver *x)
+{
+	return container_of(x, struct nop_usb_xceiv, otg);
+}
+
+static int nop_set_suspend(struct otg_transceiver *x, int suspend)
+{
+	return 0;
+}
+
+static int nop_set_peripheral(struct otg_transceiver *x,
+		struct usb_gadget *gadget)
+{
+	struct nop_usb_xceiv *nop;
+
+	if (!x)
+		return -ENODEV;
+
+	nop = xceiv_to_nop(x);
+
+	if (!gadget) {
+		nop->otg.gadget = NULL;
+		return -ENODEV;
+	}
+
+	nop->otg.gadget = gadget;
+	nop->otg.state = OTG_STATE_B_IDLE;
+	return 0;
+}
+
+static int nop_set_host(struct otg_transceiver *x, struct usb_bus *host)
+{
+	struct nop_usb_xceiv *nop;
+
+	if (!x)
+		return -ENODEV;
+
+	nop = xceiv_to_nop(x);
+
+	if (!host) {
+		nop->otg.host = NULL;
+		return -ENODEV;
+	}
+
+	nop->otg.host = host;
+	return 0;
+}
+
+static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev)
+{
+	struct nop_usb_xceiv	*nop;
+	int err;
+
+	nop = kzalloc(sizeof *nop, GFP_KERNEL);
+	if (!nop)
+		return -ENOMEM;
+
+	nop->dev		= &pdev->dev;
+	nop->otg.dev		= nop->dev;
+	nop->otg.label		= "nop-xceiv";
+	nop->otg.state		= OTG_STATE_UNDEFINED;
+	nop->otg.set_host	= nop_set_host;
+	nop->otg.set_peripheral	= nop_set_peripheral;
+	nop->otg.set_suspend	= nop_set_suspend;
+
+	err = otg_set_transceiver(&nop->otg);
+	if (err) {
+		dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
+			err);
+		goto exit;
+	}
+
+	platform_set_drvdata(pdev, nop);
+
+	return 0;
+exit:
+	kfree(nop);
+	return err;
+}
+
+static int __devexit nop_usb_xceiv_remove(struct platform_device *pdev)
+{
+	struct nop_usb_xceiv *nop = platform_get_drvdata(pdev);
+
+	otg_set_transceiver(NULL);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(nop);
+
+	return 0;
+}
+
+static struct platform_driver nop_usb_xceiv_driver = {
+	.probe		= nop_usb_xceiv_probe,
+	.remove		= __devexit_p(nop_usb_xceiv_remove),
+	.driver		= {
+		.name	= "nop_usb_xceiv",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init nop_usb_xceiv_init(void)
+{
+	return platform_driver_register(&nop_usb_xceiv_driver);
+}
+subsys_initcall(nop_usb_xceiv_init);
+
+static void __exit nop_usb_xceiv_exit(void)
+{
+	platform_driver_unregister(&nop_usb_xceiv_driver);
+}
+module_exit(nop_usb_xceiv_exit);
+
+MODULE_ALIAS("platform:nop_usb_xceiv");
+MODULE_AUTHOR("Texas Instruments Inc");
+MODULE_DESCRIPTION("NOP USB Transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 416e4410be0..d9478d0e1c8 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -34,6 +34,8 @@
 #include <linux/delay.h>
 #include <linux/usb/otg.h>
 #include <linux/i2c/twl4030.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
 
 
 /* Register defines */
@@ -246,6 +248,11 @@ struct twl4030_usb {
 	struct otg_transceiver	otg;
 	struct device		*dev;
 
+	/* TWL4030 internal USB regulator supplies */
+	struct regulator	*usb1v5;
+	struct regulator	*usb1v8;
+	struct regulator	*usb3v1;
+
 	/* for vbus reporting with irqs disabled */
 	spinlock_t		lock;
 
@@ -434,6 +441,18 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
 
 	pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
 	if (on) {
+		regulator_enable(twl->usb3v1);
+		regulator_enable(twl->usb1v8);
+		/*
+		 * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP
+		 * in twl4030) resets the VUSB_DEDICATED2 register. This reset
+		 * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to
+		 * SLEEP. We work around this by clearing the bit after usv3v1
+		 * is re-activated. This ensures that VUSB3V1 is really active.
+		 */
+		twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
+							VUSB_DEDICATED2);
+		regulator_enable(twl->usb1v5);
 		pwr &= ~PHY_PWR_PHYPWD;
 		WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
 		twl4030_usb_write(twl, PHY_CLK_CTRL,
@@ -443,6 +462,9 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
 	} else  {
 		pwr |= PHY_PWR_PHYPWD;
 		WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+		regulator_disable(twl->usb1v5);
+		regulator_disable(twl->usb1v8);
+		regulator_disable(twl->usb3v1);
 	}
 }
 
@@ -468,7 +490,7 @@ static void twl4030_phy_resume(struct twl4030_usb *twl)
 	twl->asleep = 0;
 }
 
-static void twl4030_usb_ldo_init(struct twl4030_usb *twl)
+static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
 {
 	/* Enable writing to power configuration registers */
 	twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY);
@@ -480,20 +502,45 @@ static void twl4030_usb_ldo_init(struct twl4030_usb *twl)
 	/* input to VUSB3V1 LDO is from VBAT, not VBUS */
 	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
 
-	/* turn on 3.1V regulator */
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB3V1_DEV_GRP);
+	/* Initialize 3.1V regulator */
+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
+
+	twl->usb3v1 = regulator_get(twl->dev, "usb3v1");
+	if (IS_ERR(twl->usb3v1))
+		return -ENODEV;
+
 	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
 
-	/* turn on 1.5V regulator */
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB1V5_DEV_GRP);
+	/* Initialize 1.5V regulator */
+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
+
+	twl->usb1v5 = regulator_get(twl->dev, "usb1v5");
+	if (IS_ERR(twl->usb1v5))
+		goto fail1;
+
 	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
 
-	/* turn on 1.8V regulator */
-	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB1V8_DEV_GRP);
+	/* Initialize 1.8V regulator */
+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
+
+	twl->usb1v8 = regulator_get(twl->dev, "usb1v8");
+	if (IS_ERR(twl->usb1v8))
+		goto fail2;
+
 	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
 
 	/* disable access to power configuration registers */
 	twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY);
+
+	return 0;
+
+fail2:
+	regulator_put(twl->usb1v5);
+	twl->usb1v5 = NULL;
+fail1:
+	regulator_put(twl->usb3v1);
+	twl->usb3v1 = NULL;
+	return -ENODEV;
 }
 
 static ssize_t twl4030_usb_vbus_show(struct device *dev,
@@ -598,7 +645,7 @@ static int __init twl4030_usb_probe(struct platform_device *pdev)
 {
 	struct twl4030_usb_data *pdata = pdev->dev.platform_data;
 	struct twl4030_usb	*twl;
-	int			status;
+	int			status, err;
 
 	if (!pdata) {
 		dev_dbg(&pdev->dev, "platform_data not available\n");
@@ -622,7 +669,12 @@ static int __init twl4030_usb_probe(struct platform_device *pdev)
 	/* init spinlock for workqueue */
 	spin_lock_init(&twl->lock);
 
-	twl4030_usb_ldo_init(twl);
+	err = twl4030_usb_ldo_init(twl);
+	if (err) {
+		dev_err(&pdev->dev, "ldo init failed\n");
+		kfree(twl);
+		return err;
+	}
 	otg_set_transceiver(&twl->otg);
 
 	platform_set_drvdata(pdev, twl);
@@ -688,6 +740,9 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev)
 	twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
 
 	twl4030_phy_power(twl, 0);
+	regulator_put(twl->usb1v5);
+	regulator_put(twl->usb1v8);
+	regulator_put(twl->usb3v1);
 
 	kfree(twl);