Merge branch 'usb-next' into musb-merge

* usb-next: (132 commits)
  USB: uas: Use GFP_NOIO instead of GFP_KERNEL in I/O submission path
  USB: uas: Ensure we only bind to a UAS interface
  USB: uas: Rename sense pipe and sense urb to status pipe and status urb
  USB: uas: Use kzalloc instead of kmalloc
  USB: uas: Fix up the Sense IU
  usb: musb: core: kill unneeded #include's
  DA8xx: assign name to MUSB IRQ resource
  usb: gadget: g_ncm added
  usb: gadget: f_ncm.c added
  usb: gadget: u_ether: prepare for NCM
  usb: pch_udc: Fix setup transfers with data out
  usb: pch_udc: Fix compile error, warnings and checkpatch warnings
  usb: add ab8500 usb transceiver driver
  USB: gadget: Implement runtime PM for MSM bus glue driver
  USB: gadget: Implement runtime PM for ci13xxx gadget
  USB: gadget: Add USB controller driver for MSM SoC
  USB: gadget: Introduce ci13xxx_udc_driver struct
  USB: gadget: Initialize ci13xxx gadget device's coherent DMA mask
  USB: gadget: Fix "scheduling while atomic" bugs in ci13xxx_udc
  USB: gadget: Separate out PCI bus code from ci13xxx_udc
  ...

6 files changed, 2240 insertions, 1 deletions

diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 5ce07528cd0..9fb875d5f09 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -59,6 +59,18 @@ config TWL4030_USB
 	  This transceiver supports high and full speed devices plus,
 	  in host mode, low speed.
 
+config TWL6030_USB
+	tristate "TWL6030 USB Transceiver Driver"
+	depends on TWL4030_CORE
+	select USB_OTG_UTILS
+	help
+	  Enable this to support the USB OTG transceiver on TWL6030
+	  family chips. This TWL6030 transceiver has the VBUS and ID GND
+	  and OTG SRP events capabilities. For all other transceiver functionality
+	  UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs
+	  are hooked to this driver through platform_data structure.
+	  The definition of internal PHY APIs are in the mach-omap2 layer.
+
 config NOP_USB_XCEIV
 	tristate "NOP USB Transceiver Driver"
 	select USB_OTG_UTILS
@@ -81,4 +93,24 @@ config USB_LANGWELL_OTG
 	  To compile this driver as a module, choose M here: the
 	  module will be called langwell_otg.
 
+config USB_MSM_OTG_72K
+	tristate "OTG support for Qualcomm on-chip USB controller"
+	depends on (USB || USB_GADGET) && ARCH_MSM
+	select USB_OTG_UTILS
+	help
+	  Enable this to support the USB OTG transceiver on MSM chips. It
+	  handles PHY initialization, clock management, and workarounds
+	  required after resetting the hardware and power management.
+	  This driver is required even for peripheral only or host only
+	  mode configurations.
+
+config AB8500_USB
+        tristate "AB8500 USB Transceiver Driver"
+        depends on AB8500_CORE
+        select USB_OTG_UTILS
+        help
+          Enable this to support the USB OTG transceiver in AB8500 chip.
+          This transceiver supports high and full speed devices plus,
+          in host mode, low speed.
+
 endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 66f1b83e4fa..a520e715cfd 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -12,6 +12,9 @@ obj-$(CONFIG_USB_OTG_UTILS)	+= otg.o
 obj-$(CONFIG_USB_GPIO_VBUS)	+= gpio_vbus.o
 obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
 obj-$(CONFIG_TWL4030_USB)	+= twl4030-usb.o
+obj-$(CONFIG_TWL6030_USB)	+= twl6030-usb.o
 obj-$(CONFIG_USB_LANGWELL_OTG)	+= langwell_otg.o
 obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o
 obj-$(CONFIG_USB_ULPI)		+= ulpi.o
+obj-$(CONFIG_USB_MSM_OTG_72K)	+= msm72k_otg.o
+obj-$(CONFIG_AB8500_USB)	+= ab8500-usb.o
diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/otg/ab8500-usb.c
new file mode 100644
index 00000000000..d14736b3107
--- /dev/null
+++ b/drivers/usb/otg/ab8500-usb.c
@@ -0,0 +1,585 @@
+/*
+ * drivers/usb/otg/ab8500_usb.c
+ *
+ * USB transceiver driver for AB8500 chip
+ *
+ * Copyright (C) 2010 ST-Ericsson AB
+ * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+#include <linux/slab.h>
+#include <linux/notifier.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/ab8500.h>
+
+#define AB8500_MAIN_WD_CTRL_REG 0x01
+#define AB8500_USB_LINE_STAT_REG 0x80
+#define AB8500_USB_PHY_CTRL_REG 0x8A
+
+#define AB8500_BIT_OTG_STAT_ID (1 << 0)
+#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0)
+#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1)
+#define AB8500_BIT_WD_CTRL_ENABLE (1 << 0)
+#define AB8500_BIT_WD_CTRL_KICK (1 << 1)
+
+#define AB8500_V1x_LINK_STAT_WAIT (HZ/10)
+#define AB8500_WD_KICK_DELAY_US 100 /* usec */
+#define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */
+#define AB8500_WD_V10_DISABLE_DELAY_MS 100 /* ms */
+
+/* Usb line status register */
+enum ab8500_usb_link_status {
+	USB_LINK_NOT_CONFIGURED = 0,
+	USB_LINK_STD_HOST_NC,
+	USB_LINK_STD_HOST_C_NS,
+	USB_LINK_STD_HOST_C_S,
+	USB_LINK_HOST_CHG_NM,
+	USB_LINK_HOST_CHG_HS,
+	USB_LINK_HOST_CHG_HS_CHIRP,
+	USB_LINK_DEDICATED_CHG,
+	USB_LINK_ACA_RID_A,
+	USB_LINK_ACA_RID_B,
+	USB_LINK_ACA_RID_C_NM,
+	USB_LINK_ACA_RID_C_HS,
+	USB_LINK_ACA_RID_C_HS_CHIRP,
+	USB_LINK_HM_IDGND,
+	USB_LINK_RESERVED,
+	USB_LINK_NOT_VALID_LINK
+};
+
+struct ab8500_usb {
+	struct otg_transceiver otg;
+	struct device *dev;
+	int irq_num_id_rise;
+	int irq_num_id_fall;
+	int irq_num_vbus_rise;
+	int irq_num_vbus_fall;
+	int irq_num_link_status;
+	unsigned vbus_draw;
+	struct delayed_work dwork;
+	struct work_struct phy_dis_work;
+	unsigned long link_status_wait;
+	int rev;
+};
+
+static inline struct ab8500_usb *xceiv_to_ab(struct otg_transceiver *x)
+{
+	return container_of(x, struct ab8500_usb, otg);
+}
+
+static void ab8500_usb_wd_workaround(struct ab8500_usb *ab)
+{
+	abx500_set_register_interruptible(ab->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WD_CTRL_REG,
+		AB8500_BIT_WD_CTRL_ENABLE);
+
+	udelay(AB8500_WD_KICK_DELAY_US);
+
+	abx500_set_register_interruptible(ab->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WD_CTRL_REG,
+		(AB8500_BIT_WD_CTRL_ENABLE
+		| AB8500_BIT_WD_CTRL_KICK));
+
+	if (ab->rev > 0x10) /* v1.1 v2.0 */
+		udelay(AB8500_WD_V11_DISABLE_DELAY_US);
+	else /* v1.0 */
+		msleep(AB8500_WD_V10_DISABLE_DELAY_MS);
+
+	abx500_set_register_interruptible(ab->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WD_CTRL_REG,
+		0);
+}
+
+static void ab8500_usb_phy_ctrl(struct ab8500_usb *ab, bool sel_host,
+					bool enable)
+{
+	u8 ctrl_reg;
+	abx500_get_register_interruptible(ab->dev,
+				AB8500_USB,
+				AB8500_USB_PHY_CTRL_REG,
+				&ctrl_reg);
+	if (sel_host) {
+		if (enable)
+			ctrl_reg |= AB8500_BIT_PHY_CTRL_HOST_EN;
+		else
+			ctrl_reg &= ~AB8500_BIT_PHY_CTRL_HOST_EN;
+	} else {
+		if (enable)
+			ctrl_reg |= AB8500_BIT_PHY_CTRL_DEVICE_EN;
+		else
+			ctrl_reg &= ~AB8500_BIT_PHY_CTRL_DEVICE_EN;
+	}
+
+	abx500_set_register_interruptible(ab->dev,
+				AB8500_USB,
+				AB8500_USB_PHY_CTRL_REG,
+				ctrl_reg);
+
+	/* Needed to enable the phy.*/
+	if (enable)
+		ab8500_usb_wd_workaround(ab);
+}
+
+#define ab8500_usb_host_phy_en(ab)	ab8500_usb_phy_ctrl(ab, true, true)
+#define ab8500_usb_host_phy_dis(ab)	ab8500_usb_phy_ctrl(ab, true, false)
+#define ab8500_usb_peri_phy_en(ab)	ab8500_usb_phy_ctrl(ab, false, true)
+#define ab8500_usb_peri_phy_dis(ab)	ab8500_usb_phy_ctrl(ab, false, false)
+
+static int ab8500_usb_link_status_update(struct ab8500_usb *ab)
+{
+	u8 reg;
+	enum ab8500_usb_link_status lsts;
+	void *v = NULL;
+	enum usb_xceiv_events event;
+
+	abx500_get_register_interruptible(ab->dev,
+			AB8500_USB,
+			AB8500_USB_LINE_STAT_REG,
+			&reg);
+
+	lsts = (reg >> 3) & 0x0F;
+
+	switch (lsts) {
+	case USB_LINK_NOT_CONFIGURED:
+	case USB_LINK_RESERVED:
+	case USB_LINK_NOT_VALID_LINK:
+		/* TODO: Disable regulators. */
+		ab8500_usb_host_phy_dis(ab);
+		ab8500_usb_peri_phy_dis(ab);
+		ab->otg.state = OTG_STATE_B_IDLE;
+		ab->otg.default_a = false;
+		ab->vbus_draw = 0;
+		event = USB_EVENT_NONE;
+		break;
+
+	case USB_LINK_STD_HOST_NC:
+	case USB_LINK_STD_HOST_C_NS:
+	case USB_LINK_STD_HOST_C_S:
+	case USB_LINK_HOST_CHG_NM:
+	case USB_LINK_HOST_CHG_HS:
+	case USB_LINK_HOST_CHG_HS_CHIRP:
+		if (ab->otg.gadget) {
+			/* TODO: Enable regulators. */
+			ab8500_usb_peri_phy_en(ab);
+			v = ab->otg.gadget;
+		}
+		event = USB_EVENT_VBUS;
+		break;
+
+	case USB_LINK_HM_IDGND:
+		if (ab->otg.host) {
+			/* TODO: Enable regulators. */
+			ab8500_usb_host_phy_en(ab);
+			v = ab->otg.host;
+		}
+		ab->otg.state = OTG_STATE_A_IDLE;
+		ab->otg.default_a = true;
+		event = USB_EVENT_ID;
+		break;
+
+	case USB_LINK_ACA_RID_A:
+	case USB_LINK_ACA_RID_B:
+		/* TODO */
+	case USB_LINK_ACA_RID_C_NM:
+	case USB_LINK_ACA_RID_C_HS:
+	case USB_LINK_ACA_RID_C_HS_CHIRP:
+	case USB_LINK_DEDICATED_CHG:
+		/* TODO: vbus_draw */
+		event = USB_EVENT_CHARGER;
+		break;
+	}
+
+	blocking_notifier_call_chain(&ab->otg.notifier, event, v);
+
+	return 0;
+}
+
+static void ab8500_usb_delayed_work(struct work_struct *work)
+{
+	struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
+						dwork.work);
+
+	ab8500_usb_link_status_update(ab);
+}
+
+static irqreturn_t ab8500_usb_v1x_common_irq(int irq, void *data)
+{
+	struct ab8500_usb *ab = (struct ab8500_usb *) data;
+
+	/* Wait for link status to become stable. */
+	schedule_delayed_work(&ab->dwork, ab->link_status_wait);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ab8500_usb_v1x_vbus_fall_irq(int irq, void *data)
+{
+	struct ab8500_usb *ab = (struct ab8500_usb *) data;
+
+	/* Link status will not be updated till phy is disabled. */
+	ab8500_usb_peri_phy_dis(ab);
+
+	/* Wait for link status to become stable. */
+	schedule_delayed_work(&ab->dwork, ab->link_status_wait);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ab8500_usb_v20_irq(int irq, void *data)
+{
+	struct ab8500_usb *ab = (struct ab8500_usb *) data;
+
+	ab8500_usb_link_status_update(ab);
+
+	return IRQ_HANDLED;
+}
+
+static void ab8500_usb_phy_disable_work(struct work_struct *work)
+{
+	struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
+						phy_dis_work);
+
+	if (!ab->otg.host)
+		ab8500_usb_host_phy_dis(ab);
+
+	if (!ab->otg.gadget)
+		ab8500_usb_peri_phy_dis(ab);
+}
+
+static int ab8500_usb_set_power(struct otg_transceiver *otg, unsigned mA)
+{
+	struct ab8500_usb *ab;
+
+	if (!otg)
+		return -ENODEV;
+
+	ab = xceiv_to_ab(otg);
+
+	ab->vbus_draw = mA;
+
+	if (mA)
+		blocking_notifier_call_chain(&ab->otg.notifier,
+				USB_EVENT_ENUMERATED, ab->otg.gadget);
+	return 0;
+}
+
+/* TODO: Implement some way for charging or other drivers to read
+ * ab->vbus_draw.
+ */
+
+static int ab8500_usb_set_suspend(struct otg_transceiver *x, int suspend)
+{
+	/* TODO */
+	return 0;
+}
+
+static int ab8500_usb_set_peripheral(struct otg_transceiver *otg,
+		struct usb_gadget *gadget)
+{
+	struct ab8500_usb *ab;
+
+	if (!otg)
+		return -ENODEV;
+
+	ab = xceiv_to_ab(otg);
+
+	/* Some drivers call this function in atomic context.
+	 * Do not update ab8500 registers directly till this
+	 * is fixed.
+	 */
+
+	if (!gadget) {
+		/* TODO: Disable regulators. */
+		ab->otg.gadget = NULL;
+		schedule_work(&ab->phy_dis_work);
+	} else {
+		ab->otg.gadget = gadget;
+		ab->otg.state = OTG_STATE_B_IDLE;
+
+		/* Phy will not be enabled if cable is already
+		 * plugged-in. Schedule to enable phy.
+		 * Use same delay to avoid any race condition.
+		 */
+		schedule_delayed_work(&ab->dwork, ab->link_status_wait);
+	}
+
+	return 0;
+}
+
+static int ab8500_usb_set_host(struct otg_transceiver *otg,
+					struct usb_bus *host)
+{
+	struct ab8500_usb *ab;
+
+	if (!otg)
+		return -ENODEV;
+
+	ab = xceiv_to_ab(otg);
+
+	/* Some drivers call this function in atomic context.
+	 * Do not update ab8500 registers directly till this
+	 * is fixed.
+	 */
+
+	if (!host) {
+		/* TODO: Disable regulators. */
+		ab->otg.host = NULL;
+		schedule_work(&ab->phy_dis_work);
+	} else {
+		ab->otg.host = host;
+		/* Phy will not be enabled if cable is already
+		 * plugged-in. Schedule to enable phy.
+		 * Use same delay to avoid any race condition.
+		 */
+		schedule_delayed_work(&ab->dwork, ab->link_status_wait);
+	}
+
+	return 0;
+}
+
+static void ab8500_usb_irq_free(struct ab8500_usb *ab)
+{
+	if (ab->rev < 0x20) {
+		free_irq(ab->irq_num_id_rise, ab);
+		free_irq(ab->irq_num_id_fall, ab);
+		free_irq(ab->irq_num_vbus_rise, ab);
+		free_irq(ab->irq_num_vbus_fall, ab);
+	} else {
+		free_irq(ab->irq_num_link_status, ab);
+	}
+}
+
+static int ab8500_usb_v1x_res_setup(struct platform_device *pdev,
+				struct ab8500_usb *ab)
+{
+	int err;
+
+	ab->irq_num_id_rise = platform_get_irq_byname(pdev, "ID_WAKEUP_R");
+	if (ab->irq_num_id_rise < 0) {
+		dev_err(&pdev->dev, "ID rise irq not found\n");
+		return ab->irq_num_id_rise;
+	}
+	err = request_threaded_irq(ab->irq_num_id_rise, NULL,
+		ab8500_usb_v1x_common_irq,
+		IRQF_NO_SUSPEND | IRQF_SHARED,
+		"usb-id-rise", ab);
+	if (err < 0) {
+		dev_err(ab->dev, "request_irq failed for ID rise irq\n");
+		goto fail0;
+	}
+
+	ab->irq_num_id_fall = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
+	if (ab->irq_num_id_fall < 0) {
+		dev_err(&pdev->dev, "ID fall irq not found\n");
+		return ab->irq_num_id_fall;
+	}
+	err = request_threaded_irq(ab->irq_num_id_fall, NULL,
+		ab8500_usb_v1x_common_irq,
+		IRQF_NO_SUSPEND | IRQF_SHARED,
+		"usb-id-fall", ab);
+	if (err < 0) {
+		dev_err(ab->dev, "request_irq failed for ID fall irq\n");
+		goto fail1;
+	}
+
+	ab->irq_num_vbus_rise = platform_get_irq_byname(pdev, "VBUS_DET_R");
+	if (ab->irq_num_vbus_rise < 0) {
+		dev_err(&pdev->dev, "VBUS rise irq not found\n");
+		return ab->irq_num_vbus_rise;
+	}
+	err = request_threaded_irq(ab->irq_num_vbus_rise, NULL,
+		ab8500_usb_v1x_common_irq,
+		IRQF_NO_SUSPEND | IRQF_SHARED,
+		"usb-vbus-rise", ab);
+	if (err < 0) {
+		dev_err(ab->dev, "request_irq failed for Vbus rise irq\n");
+		goto fail2;
+	}
+
+	ab->irq_num_vbus_fall = platform_get_irq_byname(pdev, "VBUS_DET_F");
+	if (ab->irq_num_vbus_fall < 0) {
+		dev_err(&pdev->dev, "VBUS fall irq not found\n");
+		return ab->irq_num_vbus_fall;
+	}
+	err = request_threaded_irq(ab->irq_num_vbus_fall, NULL,
+		ab8500_usb_v1x_vbus_fall_irq,
+		IRQF_NO_SUSPEND | IRQF_SHARED,
+		"usb-vbus-fall", ab);
+	if (err < 0) {
+		dev_err(ab->dev, "request_irq failed for Vbus fall irq\n");
+		goto fail3;
+	}
+
+	return 0;
+fail3:
+	free_irq(ab->irq_num_vbus_rise, ab);
+fail2:
+	free_irq(ab->irq_num_id_fall, ab);
+fail1:
+	free_irq(ab->irq_num_id_rise, ab);
+fail0:
+	return err;
+}
+
+static int ab8500_usb_v2_res_setup(struct platform_device *pdev,
+				struct ab8500_usb *ab)
+{
+	int err;
+
+	ab->irq_num_link_status = platform_get_irq_byname(pdev,
+						"USB_LINK_STATUS");
+	if (ab->irq_num_link_status < 0) {
+		dev_err(&pdev->dev, "Link status irq not found\n");
+		return ab->irq_num_link_status;
+	}
+
+	err = request_threaded_irq(ab->irq_num_link_status, NULL,
+		ab8500_usb_v20_irq,
+		IRQF_NO_SUSPEND | IRQF_SHARED,
+		"usb-link-status", ab);
+	if (err < 0) {
+		dev_err(ab->dev,
+			"request_irq failed for link status irq\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int __devinit ab8500_usb_probe(struct platform_device *pdev)
+{
+	struct ab8500_usb	*ab;
+	int err;
+	int rev;
+
+	rev = abx500_get_chip_id(&pdev->dev);
+	if (rev < 0) {
+		dev_err(&pdev->dev, "Chip id read failed\n");
+		return rev;
+	} else if (rev < 0x10) {
+		dev_err(&pdev->dev, "Unsupported AB8500 chip\n");
+		return -ENODEV;
+	}
+
+	ab = kzalloc(sizeof *ab, GFP_KERNEL);
+	if (!ab)
+		return -ENOMEM;
+
+	ab->dev			= &pdev->dev;
+	ab->rev			= rev;
+	ab->otg.dev		= ab->dev;
+	ab->otg.label		= "ab8500";
+	ab->otg.state		= OTG_STATE_UNDEFINED;
+	ab->otg.set_host	= ab8500_usb_set_host;
+	ab->otg.set_peripheral	= ab8500_usb_set_peripheral;
+	ab->otg.set_suspend	= ab8500_usb_set_suspend;
+	ab->otg.set_power	= ab8500_usb_set_power;
+
+	platform_set_drvdata(pdev, ab);
+
+	BLOCKING_INIT_NOTIFIER_HEAD(&ab->otg.notifier);
+
+	/* v1: Wait for link status to become stable.
+	 * all: Updates form set_host and set_peripheral as they are atomic.
+	 */
+	INIT_DELAYED_WORK(&ab->dwork, ab8500_usb_delayed_work);
+
+	/* all: Disable phy when called from set_host and set_peripheral */
+	INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work);
+
+	if (ab->rev < 0x20) {
+		err = ab8500_usb_v1x_res_setup(pdev, ab);
+		ab->link_status_wait = AB8500_V1x_LINK_STAT_WAIT;
+	} else {
+		err = ab8500_usb_v2_res_setup(pdev, ab);
+	}
+
+	if (err < 0)
+		goto fail0;
+
+	err = otg_set_transceiver(&ab->otg);
+	if (err) {
+		dev_err(&pdev->dev, "Can't register transceiver\n");
+		goto fail1;
+	}
+
+	dev_info(&pdev->dev, "AB8500 usb driver initialized\n");
+
+	return 0;
+fail1:
+	ab8500_usb_irq_free(ab);
+fail0:
+	kfree(ab);
+	return err;
+}
+
+static int __devexit ab8500_usb_remove(struct platform_device *pdev)
+{
+	struct ab8500_usb *ab = platform_get_drvdata(pdev);
+
+	ab8500_usb_irq_free(ab);
+
+	cancel_delayed_work_sync(&ab->dwork);
+
+	cancel_work_sync(&ab->phy_dis_work);
+
+	otg_set_transceiver(NULL);
+
+	ab8500_usb_host_phy_dis(ab);
+	ab8500_usb_peri_phy_dis(ab);
+
+	platform_set_drvdata(pdev, NULL);
+
+	kfree(ab);
+
+	return 0;
+}
+
+static struct platform_driver ab8500_usb_driver = {
+	.probe		= ab8500_usb_probe,
+	.remove		= __devexit_p(ab8500_usb_remove),
+	.driver		= {
+		.name	= "ab8500-usb",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init ab8500_usb_init(void)
+{
+	return platform_driver_register(&ab8500_usb_driver);
+}
+subsys_initcall(ab8500_usb_init);
+
+static void __exit ab8500_usb_exit(void)
+{
+	platform_driver_unregister(&ab8500_usb_driver);
+}
+module_exit(ab8500_usb_exit);
+
+MODULE_ALIAS("platform:ab8500_usb");
+MODULE_AUTHOR("ST-Ericsson AB");
+MODULE_DESCRIPTION("AB8500 usb transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/otg/msm72k_otg.c b/drivers/usb/otg/msm72k_otg.c
new file mode 100644
index 00000000000..1cd52edcd0c
--- /dev/null
+++ b/drivers/usb/otg/msm72k_otg.c
@@ -0,0 +1,1125 @@
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/uaccess.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/msm_hsusb.h>
+#include <linux/usb/msm_hsusb_hw.h>
+
+#include <mach/clk.h>
+
+#define MSM_USB_BASE	(motg->regs)
+#define DRIVER_NAME	"msm_otg"
+
+#define ULPI_IO_TIMEOUT_USEC	(10 * 1000)
+static int ulpi_read(struct otg_transceiver *otg, u32 reg)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	int cnt = 0;
+
+	/* initiate read operation */
+	writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg),
+	       USB_ULPI_VIEWPORT);
+
+	/* wait for completion */
+	while (cnt < ULPI_IO_TIMEOUT_USEC) {
+		if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
+			break;
+		udelay(1);
+		cnt++;
+	}
+
+	if (cnt >= ULPI_IO_TIMEOUT_USEC) {
+		dev_err(otg->dev, "ulpi_read: timeout %08x\n",
+			readl(USB_ULPI_VIEWPORT));
+		return -ETIMEDOUT;
+	}
+	return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT));
+}
+
+static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	int cnt = 0;
+
+	/* initiate write operation */
+	writel(ULPI_RUN | ULPI_WRITE |
+	       ULPI_ADDR(reg) | ULPI_DATA(val),
+	       USB_ULPI_VIEWPORT);
+
+	/* wait for completion */
+	while (cnt < ULPI_IO_TIMEOUT_USEC) {
+		if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
+			break;
+		udelay(1);
+		cnt++;
+	}
+
+	if (cnt >= ULPI_IO_TIMEOUT_USEC) {
+		dev_err(otg->dev, "ulpi_write: timeout\n");
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+static struct otg_io_access_ops msm_otg_io_ops = {
+	.read = ulpi_read,
+	.write = ulpi_write,
+};
+
+static void ulpi_init(struct msm_otg *motg)
+{
+	struct msm_otg_platform_data *pdata = motg->pdata;
+	int *seq = pdata->phy_init_seq;
+
+	if (!seq)
+		return;
+
+	while (seq[0] >= 0) {
+		dev_vdbg(motg->otg.dev, "ulpi: write 0x%02x to 0x%02x\n",
+				seq[0], seq[1]);
+		ulpi_write(&motg->otg, seq[0], seq[1]);
+		seq += 2;
+	}
+}
+
+static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
+{
+	int ret;
+
+	if (assert) {
+		ret = clk_reset(motg->clk, CLK_RESET_ASSERT);
+		if (ret)
+			dev_err(motg->otg.dev, "usb hs_clk assert failed\n");
+	} else {
+		ret = clk_reset(motg->clk, CLK_RESET_DEASSERT);
+		if (ret)
+			dev_err(motg->otg.dev, "usb hs_clk deassert failed\n");
+	}
+	return ret;
+}
+
+static int msm_otg_phy_clk_reset(struct msm_otg *motg)
+{
+	int ret;
+
+	ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT);
+	if (ret) {
+		dev_err(motg->otg.dev, "usb phy clk assert failed\n");
+		return ret;
+	}
+	usleep_range(10000, 12000);
+	ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT);
+	if (ret)
+		dev_err(motg->otg.dev, "usb phy clk deassert failed\n");
+	return ret;
+}
+
+static int msm_otg_phy_reset(struct msm_otg *motg)
+{
+	u32 val;
+	int ret;
+	int retries;
+
+	ret = msm_otg_link_clk_reset(motg, 1);
+	if (ret)
+		return ret;
+	ret = msm_otg_phy_clk_reset(motg);
+	if (ret)
+		return ret;
+	ret = msm_otg_link_clk_reset(motg, 0);
+	if (ret)
+		return ret;
+
+	val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK;
+	writel(val | PORTSC_PTS_ULPI, USB_PORTSC);
+
+	for (retries = 3; retries > 0; retries--) {
+		ret = ulpi_write(&motg->otg, ULPI_FUNC_CTRL_SUSPENDM,
+				ULPI_CLR(ULPI_FUNC_CTRL));
+		if (!ret)
+			break;
+		ret = msm_otg_phy_clk_reset(motg);
+		if (ret)
+			return ret;
+	}
+	if (!retries)
+		return -ETIMEDOUT;
+
+	/* This reset calibrates the phy, if the above write succeeded */
+	ret = msm_otg_phy_clk_reset(motg);
+	if (ret)
+		return ret;
+
+	for (retries = 3; retries > 0; retries--) {
+		ret = ulpi_read(&motg->otg, ULPI_DEBUG);
+		if (ret != -ETIMEDOUT)
+			break;
+		ret = msm_otg_phy_clk_reset(motg);
+		if (ret)
+			return ret;
+	}
+	if (!retries)
+		return -ETIMEDOUT;
+
+	dev_info(motg->otg.dev, "phy_reset: success\n");
+	return 0;
+}
+
+#define LINK_RESET_TIMEOUT_USEC		(250 * 1000)
+static int msm_otg_reset(struct otg_transceiver *otg)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	struct msm_otg_platform_data *pdata = motg->pdata;
+	int cnt = 0;
+	int ret;
+	u32 val = 0;
+	u32 ulpi_val = 0;
+
+	ret = msm_otg_phy_reset(motg);
+	if (ret) {
+		dev_err(otg->dev, "phy_reset failed\n");
+		return ret;
+	}
+
+	ulpi_init(motg);
+
+	writel(USBCMD_RESET, USB_USBCMD);
+	while (cnt < LINK_RESET_TIMEOUT_USEC) {
+		if (!(readl(USB_USBCMD) & USBCMD_RESET))
+			break;
+		udelay(1);
+		cnt++;
+	}
+	if (cnt >= LINK_RESET_TIMEOUT_USEC)
+		return -ETIMEDOUT;
+
+	/* select ULPI phy */
+	writel(0x80000000, USB_PORTSC);
+
+	msleep(100);
+
+	writel(0x0, USB_AHBBURST);
+	writel(0x00, USB_AHBMODE);
+
+	if (pdata->otg_control == OTG_PHY_CONTROL) {
+		val = readl(USB_OTGSC);
+		if (pdata->mode == USB_OTG) {
+			ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID;
+			val |= OTGSC_IDIE | OTGSC_BSVIE;
+		} else if (pdata->mode == USB_PERIPHERAL) {
+			ulpi_val = ULPI_INT_SESS_VALID;
+			val |= OTGSC_BSVIE;
+		}
+		writel(val, USB_OTGSC);
+		ulpi_write(otg, ulpi_val, ULPI_USB_INT_EN_RISE);
+		ulpi_write(otg, ulpi_val, ULPI_USB_INT_EN_FALL);
+	}
+
+	return 0;
+}
+
+#define PHY_SUSPEND_TIMEOUT_USEC	(500 * 1000)
+static int msm_otg_suspend(struct msm_otg *motg)
+{
+	struct otg_transceiver *otg = &motg->otg;
+	struct usb_bus *bus = otg->host;
+	struct msm_otg_platform_data *pdata = motg->pdata;
+	int cnt = 0;
+
+	if (atomic_read(&motg->in_lpm))
+		return 0;
+
+	disable_irq(motg->irq);
+	/*
+	 * Interrupt Latch Register auto-clear feature is not present
+	 * in all PHY versions. Latch register is clear on read type.
+	 * Clear latch register to avoid spurious wakeup from
+	 * low power mode (LPM).
+	 */
+	ulpi_read(otg, 0x14);
+
+	/*
+	 * PHY comparators are disabled when PHY enters into low power
+	 * mode (LPM). Keep PHY comparators ON in LPM only when we expect
+	 * VBUS/Id notifications from USB PHY. Otherwise turn off USB
+	 * PHY comparators. This save significant amount of power.
+	 */
+	if (pdata->otg_control == OTG_PHY_CONTROL)
+		ulpi_write(otg, 0x01, 0x30);
+
+	/*
+	 * PLL is not turned off when PHY enters into low power mode (LPM).
+	 * Disable PLL for maximum power savings.
+	 */
+	ulpi_write(otg, 0x08, 0x09);
+
+	/*
+	 * PHY may take some time or even fail to enter into low power
+	 * mode (LPM). Hence poll for 500 msec and reset the PHY and link
+	 * in failure case.
+	 */
+	writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
+	while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
+		if (readl(USB_PORTSC) & PORTSC_PHCD)
+			break;
+		udelay(1);
+		cnt++;
+	}
+
+	if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) {
+		dev_err(otg->dev, "Unable to suspend PHY\n");
+		msm_otg_reset(otg);
+		enable_irq(motg->irq);
+		return -ETIMEDOUT;
+	}
+
+	/*
+	 * PHY has capability to generate interrupt asynchronously in low
+	 * power mode (LPM). This interrupt is level triggered. So USB IRQ
+	 * line must be disabled till async interrupt enable bit is cleared
+	 * in USBCMD register. Assert STP (ULPI interface STOP signal) to
+	 * block data communication from PHY.
+	 */
+	writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD);
+
+	clk_disable(motg->pclk);
+	clk_disable(motg->clk);
+	if (motg->core_clk)
+		clk_disable(motg->core_clk);
+
+	if (device_may_wakeup(otg->dev))
+		enable_irq_wake(motg->irq);
+	if (bus)
+		clear_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
+
+	atomic_set(&motg->in_lpm, 1);
+	enable_irq(motg->irq);
+
+	dev_info(otg->dev, "USB in low power mode\n");
+
+	return 0;
+}
+
+#define PHY_RESUME_TIMEOUT_USEC	(100 * 1000)
+static int msm_otg_resume(struct msm_otg *motg)
+{
+	struct otg_transceiver *otg = &motg->otg;
+	struct usb_bus *bus = otg->host;
+	int cnt = 0;
+	unsigned temp;
+
+	if (!atomic_read(&motg->in_lpm))
+		return 0;
+
+	clk_enable(motg->pclk);
+	clk_enable(motg->clk);
+	if (motg->core_clk)
+		clk_enable(motg->core_clk);
+
+	temp = readl(USB_USBCMD);
+	temp &= ~ASYNC_INTR_CTRL;
+	temp &= ~ULPI_STP_CTRL;
+	writel(temp, USB_USBCMD);
+
+	/*
+	 * PHY comes out of low power mode (LPM) in case of wakeup
+	 * from asynchronous interrupt.
+	 */
+	if (!(readl(USB_PORTSC) & PORTSC_PHCD))
+		goto skip_phy_resume;
+
+	writel(readl(USB_PORTSC) & ~PORTSC_PHCD, USB_PORTSC);
+	while (cnt < PHY_RESUME_TIMEOUT_USEC) {
+		if (!(readl(USB_PORTSC) & PORTSC_PHCD))
+			break;
+		udelay(1);
+		cnt++;
+	}
+
+	if (cnt >= PHY_RESUME_TIMEOUT_USEC) {
+		/*
+		 * This is a fatal error. Reset the link and
+		 * PHY. USB state can not be restored. Re-insertion
+		 * of USB cable is the only way to get USB working.
+		 */
+		dev_err(otg->dev, "Unable to resume USB."
+				"Re-plugin the cable\n");
+		msm_otg_reset(otg);
+	}
+
+skip_phy_resume:
+	if (device_may_wakeup(otg->dev))
+		disable_irq_wake(motg->irq);
+	if (bus)
+		set_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
+
+	if (motg->async_int) {
+		motg->async_int = 0;
+		pm_runtime_put(otg->dev);
+		enable_irq(motg->irq);
+	}
+
+	atomic_set(&motg->in_lpm, 0);
+
+	dev_info(otg->dev, "USB exited from low power mode\n");
+
+	return 0;
+}
+
+static void msm_otg_start_host(struct otg_transceiver *otg, int on)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	struct msm_otg_platform_data *pdata = motg->pdata;
+	struct usb_hcd *hcd;
+
+	if (!otg->host)
+		return;
+
+	hcd = bus_to_hcd(otg->host);
+
+	if (on) {
+		dev_dbg(otg->dev, "host on\n");
+
+		if (pdata->vbus_power)
+			pdata->vbus_power(1);
+		/*
+		 * Some boards have a switch cotrolled by gpio
+		 * to enable/disable internal HUB. Enable internal
+		 * HUB before kicking the host.
+		 */
+		if (pdata->setup_gpio)
+			pdata->setup_gpio(OTG_STATE_A_HOST);
+#ifdef CONFIG_USB
+		usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
+#endif
+	} else {
+		dev_dbg(otg->dev, "host off\n");
+
+#ifdef CONFIG_USB
+		usb_remove_hcd(hcd);
+#endif
+		if (pdata->setup_gpio)
+			pdata->setup_gpio(OTG_STATE_UNDEFINED);
+		if (pdata->vbus_power)
+			pdata->vbus_power(0);
+	}
+}
+
+static int msm_otg_set_host(struct otg_transceiver *otg, struct usb_bus *host)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	struct usb_hcd *hcd;
+
+	/*
+	 * Fail host registration if this board can support
+	 * only peripheral configuration.
+	 */
+	if (motg->pdata->mode == USB_PERIPHERAL) {
+		dev_info(otg->dev, "Host mode is not supported\n");
+		return -ENODEV;
+	}
+
+	if (!host) {
+		if (otg->state == OTG_STATE_A_HOST) {
+			pm_runtime_get_sync(otg->dev);
+			msm_otg_start_host(otg, 0);
+			otg->host = NULL;
+			otg->state = OTG_STATE_UNDEFINED;
+			schedule_work(&motg->sm_work);
+		} else {
+			otg->host = NULL;
+		}
+
+		return 0;
+	}
+
+	hcd = bus_to_hcd(host);
+	hcd->power_budget = motg->pdata->power_budget;
+
+	otg->host = host;
+	dev_dbg(otg->dev, "host driver registered w/ tranceiver\n");
+
+	/*
+	 * Kick the state machine work, if peripheral is not supported
+	 * or peripheral is already registered with us.
+	 */
+	if (motg->pdata->mode == USB_HOST || otg->gadget) {
+		pm_runtime_get_sync(otg->dev);
+		schedule_work(&motg->sm_work);
+	}
+
+	return 0;
+}
+
+static void msm_otg_start_peripheral(struct otg_transceiver *otg, int on)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	struct msm_otg_platform_data *pdata = motg->pdata;
+
+	if (!otg->gadget)
+		return;
+
+	if (on) {
+		dev_dbg(otg->dev, "gadget on\n");
+		/*
+		 * Some boards have a switch cotrolled by gpio
+		 * to enable/disable internal HUB. Disable internal
+		 * HUB before kicking the gadget.
+		 */
+		if (pdata->setup_gpio)
+			pdata->setup_gpio(OTG_STATE_B_PERIPHERAL);
+		usb_gadget_vbus_connect(otg->gadget);
+	} else {
+		dev_dbg(otg->dev, "gadget off\n");
+		usb_gadget_vbus_disconnect(otg->gadget);
+		if (pdata->setup_gpio)
+			pdata->setup_gpio(OTG_STATE_UNDEFINED);
+	}
+
+}
+
+static int msm_otg_set_peripheral(struct otg_transceiver *otg,
+			struct usb_gadget *gadget)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+
+	/*
+	 * Fail peripheral registration if this board can support
+	 * only host configuration.
+	 */
+	if (motg->pdata->mode == USB_HOST) {
+		dev_info(otg->dev, "Peripheral mode is not supported\n");
+		return -ENODEV;
+	}
+
+	if (!gadget) {
+		if (otg->state == OTG_STATE_B_PERIPHERAL) {
+			pm_runtime_get_sync(otg->dev);
+			msm_otg_start_peripheral(otg, 0);
+			otg->gadget = NULL;
+			otg->state = OTG_STATE_UNDEFINED;
+			schedule_work(&motg->sm_work);
+		} else {
+			otg->gadget = NULL;
+		}
+
+		return 0;
+	}
+	otg->gadget = gadget;
+	dev_dbg(otg->dev, "peripheral driver registered w/ tranceiver\n");
+
+	/*
+	 * Kick the state machine work, if host is not supported
+	 * or host is already registered with us.
+	 */
+	if (motg->pdata->mode == USB_PERIPHERAL || otg->host) {
+		pm_runtime_get_sync(otg->dev);
+		schedule_work(&motg->sm_work);
+	}
+
+	return 0;
+}
+
+/*
+ * We support OTG, Peripheral only and Host only configurations. In case
+ * of OTG, mode switch (host-->peripheral/peripheral-->host) can happen
+ * via Id pin status or user request (debugfs). Id/BSV interrupts are not
+ * enabled when switch is controlled by user and default mode is supplied
+ * by board file, which can be changed by userspace later.
+ */
+static void msm_otg_init_sm(struct msm_otg *motg)
+{
+	struct msm_otg_platform_data *pdata = motg->pdata;
+	u32 otgsc = readl(USB_OTGSC);
+
+	switch (pdata->mode) {
+	case USB_OTG:
+		if (pdata->otg_control == OTG_PHY_CONTROL) {
+			if (otgsc & OTGSC_ID)
+				set_bit(ID, &motg->inputs);
+			else
+				clear_bit(ID, &motg->inputs);
+
+			if (otgsc & OTGSC_BSV)
+				set_bit(B_SESS_VLD, &motg->inputs);
+			else
+				clear_bit(B_SESS_VLD, &motg->inputs);
+		} else if (pdata->otg_control == OTG_USER_CONTROL) {
+			if (pdata->default_mode == USB_HOST) {
+				clear_bit(ID, &motg->inputs);
+			} else if (pdata->default_mode == USB_PERIPHERAL) {
+				set_bit(ID, &motg->inputs);
+				set_bit(B_SESS_VLD, &motg->inputs);
+			} else {
+				set_bit(ID, &motg->inputs);
+				clear_bit(B_SESS_VLD, &motg->inputs);
+			}
+		}
+		break;
+	case USB_HOST:
+		clear_bit(ID, &motg->inputs);
+		break;
+	case USB_PERIPHERAL:
+		set_bit(ID, &motg->inputs);
+		if (otgsc & OTGSC_BSV)
+			set_bit(B_SESS_VLD, &motg->inputs);
+		else
+			clear_bit(B_SESS_VLD, &motg->inputs);
+		break;
+	default:
+		break;
+	}
+}
+
+static void msm_otg_sm_work(struct work_struct *w)
+{
+	struct msm_otg *motg = container_of(w, struct msm_otg, sm_work);
+	struct otg_transceiver *otg = &motg->otg;
+
+	switch (otg->state) {
+	case OTG_STATE_UNDEFINED:
+		dev_dbg(otg->dev, "OTG_STATE_UNDEFINED state\n");
+		msm_otg_reset(otg);
+		msm_otg_init_sm(motg);
+		otg->state = OTG_STATE_B_IDLE;
+		/* FALL THROUGH */
+	case OTG_STATE_B_IDLE:
+		dev_dbg(otg->dev, "OTG_STATE_B_IDLE state\n");
+		if (!test_bit(ID, &motg->inputs) && otg->host) {
+			/* disable BSV bit */
+			writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC);
+			msm_otg_start_host(otg, 1);
+			otg->state = OTG_STATE_A_HOST;
+		} else if (test_bit(B_SESS_VLD, &motg->inputs) && otg->gadget) {
+			msm_otg_start_peripheral(otg, 1);
+			otg->state = OTG_STATE_B_PERIPHERAL;
+		}
+		pm_runtime_put_sync(otg->dev);
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		dev_dbg(otg->dev, "OTG_STATE_B_PERIPHERAL state\n");
+		if (!test_bit(B_SESS_VLD, &motg->inputs) ||
+				!test_bit(ID, &motg->inputs)) {
+			msm_otg_start_peripheral(otg, 0);
+			otg->state = OTG_STATE_B_IDLE;
+			msm_otg_reset(otg);
+			schedule_work(w);
+		}
+		break;
+	case OTG_STATE_A_HOST:
+		dev_dbg(otg->dev, "OTG_STATE_A_HOST state\n");
+		if (test_bit(ID, &motg->inputs)) {
+			msm_otg_start_host(otg, 0);
+			otg->state = OTG_STATE_B_IDLE;
+			msm_otg_reset(otg);
+			schedule_work(w);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static irqreturn_t msm_otg_irq(int irq, void *data)
+{
+	struct msm_otg *motg = data;
+	struct otg_transceiver *otg = &motg->otg;
+	u32 otgsc = 0;
+
+	if (atomic_read(&motg->in_lpm)) {
+		disable_irq_nosync(irq);
+		motg->async_int = 1;
+		pm_runtime_get(otg->dev);
+		return IRQ_HANDLED;
+	}
+
+	otgsc = readl(USB_OTGSC);
+	if (!(otgsc & (OTGSC_IDIS | OTGSC_BSVIS)))
+		return IRQ_NONE;
+
+	if ((otgsc & OTGSC_IDIS) && (otgsc & OTGSC_IDIE)) {
+		if (otgsc & OTGSC_ID)
+			set_bit(ID, &motg->inputs);
+		else
+			clear_bit(ID, &motg->inputs);
+		dev_dbg(otg->dev, "ID set/clear\n");
+		pm_runtime_get_noresume(otg->dev);
+	} else if ((otgsc & OTGSC_BSVIS) && (otgsc & OTGSC_BSVIE)) {
+		if (otgsc & OTGSC_BSV)
+			set_bit(B_SESS_VLD, &motg->inputs);
+		else
+			clear_bit(B_SESS_VLD, &motg->inputs);
+		dev_dbg(otg->dev, "BSV set/clear\n");
+		pm_runtime_get_noresume(otg->dev);
+	}
+
+	writel(otgsc, USB_OTGSC);
+	schedule_work(&motg->sm_work);
+	return IRQ_HANDLED;
+}
+
+static int msm_otg_mode_show(struct seq_file *s, void *unused)
+{
+	struct msm_otg *motg = s->private;
+	struct otg_transceiver *otg = &motg->otg;
+
+	switch (otg->state) {
+	case OTG_STATE_A_HOST:
+		seq_printf(s, "host\n");
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		seq_printf(s, "peripheral\n");
+		break;
+	default:
+		seq_printf(s, "none\n");
+		break;
+	}
+
+	return 0;
+}
+
+static int msm_otg_mode_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, msm_otg_mode_show, inode->i_private);
+}
+
+static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
+				size_t count, loff_t *ppos)
+{
+	struct msm_otg *motg = file->private_data;
+	char buf[16];
+	struct otg_transceiver *otg = &motg->otg;
+	int status = count;
+	enum usb_mode_type req_mode;
+
+	memset(buf, 0x00, sizeof(buf));
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) {
+		status = -EFAULT;
+		goto out;
+	}
+
+	if (!strncmp(buf, "host", 4)) {
+		req_mode = USB_HOST;
+	} else if (!strncmp(buf, "peripheral", 10)) {
+		req_mode = USB_PERIPHERAL;
+	} else if (!strncmp(buf, "none", 4)) {
+		req_mode = USB_NONE;
+	} else {
+		status = -EINVAL;
+		goto out;
+	}
+
+	switch (req_mode) {
+	case USB_NONE:
+		switch (otg->state) {
+		case OTG_STATE_A_HOST:
+		case OTG_STATE_B_PERIPHERAL:
+			set_bit(ID, &motg->inputs);
+			clear_bit(B_SESS_VLD, &motg->inputs);
+			break;
+		default:
+			goto out;
+		}
+		break;
+	case USB_PERIPHERAL:
+		switch (otg->state) {
+		case OTG_STATE_B_IDLE:
+		case OTG_STATE_A_HOST:
+			set_bit(ID, &motg->inputs);
+			set_bit(B_SESS_VLD, &motg->inputs);
+			break;
+		default:
+			goto out;
+		}
+		break;
+	case USB_HOST:
+		switch (otg->state) {
+		case OTG_STATE_B_IDLE:
+		case OTG_STATE_B_PERIPHERAL:
+			clear_bit(ID, &motg->inputs);
+			break;
+		default:
+			goto out;
+		}
+		break;
+	default:
+		goto out;
+	}
+
+	pm_runtime_get_sync(otg->dev);
+	schedule_work(&motg->sm_work);
+out:
+	return status;
+}
+
+const struct file_operations msm_otg_mode_fops = {
+	.open = msm_otg_mode_open,
+	.read = seq_read,
+	.write = msm_otg_mode_write,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static struct dentry *msm_otg_dbg_root;
+static struct dentry *msm_otg_dbg_mode;
+
+static int msm_otg_debugfs_init(struct msm_otg *motg)
+{
+	msm_otg_dbg_root = debugfs_create_dir("msm_otg", NULL);
+
+	if (!msm_otg_dbg_root || IS_ERR(msm_otg_dbg_root))
+		return -ENODEV;
+
+	msm_otg_dbg_mode = debugfs_create_file("mode", S_IRUGO | S_IWUSR,
+				msm_otg_dbg_root, motg, &msm_otg_mode_fops);
+	if (!msm_otg_dbg_mode) {
+		debugfs_remove(msm_otg_dbg_root);
+		msm_otg_dbg_root = NULL;
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void msm_otg_debugfs_cleanup(void)
+{
+	debugfs_remove(msm_otg_dbg_mode);
+	debugfs_remove(msm_otg_dbg_root);
+}
+
+static int __init msm_otg_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct resource *res;
+	struct msm_otg *motg;
+	struct otg_transceiver *otg;
+
+	dev_info(&pdev->dev, "msm_otg probe\n");
+	if (!pdev->dev.platform_data) {
+		dev_err(&pdev->dev, "No platform data given. Bailing out\n");
+		return -ENODEV;
+	}
+
+	motg = kzalloc(sizeof(struct msm_otg), GFP_KERNEL);
+	if (!motg) {
+		dev_err(&pdev->dev, "unable to allocate msm_otg\n");
+		return -ENOMEM;
+	}
+
+	motg->pdata = pdev->dev.platform_data;
+	otg = &motg->otg;
+	otg->dev = &pdev->dev;
+
+	motg->phy_reset_clk = clk_get(&pdev->dev, "usb_phy_clk");
+	if (IS_ERR(motg->phy_reset_clk)) {
+		dev_err(&pdev->dev, "failed to get usb_phy_clk\n");
+		ret = PTR_ERR(motg->phy_reset_clk);
+		goto free_motg;
+	}
+
+	motg->clk = clk_get(&pdev->dev, "usb_hs_clk");
+	if (IS_ERR(motg->clk)) {
+		dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
+		ret = PTR_ERR(motg->clk);
+		goto put_phy_reset_clk;
+	}
+
+	motg->pclk = clk_get(&pdev->dev, "usb_hs_pclk");
+	if (IS_ERR(motg->pclk)) {
+		dev_err(&pdev->dev, "failed to get usb_hs_pclk\n");
+		ret = PTR_ERR(motg->pclk);
+		goto put_clk;
+	}
+
+	/*
+	 * USB core clock is not present on all MSM chips. This
+	 * clock is introduced to remove the dependency on AXI
+	 * bus frequency.
+	 */
+	motg->core_clk = clk_get(&pdev->dev, "usb_hs_core_clk");
+	if (IS_ERR(motg->core_clk))
+		motg->core_clk = NULL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get platform resource mem\n");
+		ret = -ENODEV;
+		goto put_core_clk;
+	}
+
+	motg->regs = ioremap(res->start, resource_size(res));
+	if (!motg->regs) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		ret = -ENOMEM;
+		goto put_core_clk;
+	}
+	dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs);
+
+	motg->irq = platform_get_irq(pdev, 0);
+	if (!motg->irq) {
+		dev_err(&pdev->dev, "platform_get_irq failed\n");
+		ret = -ENODEV;
+		goto free_regs;
+	}
+
+	clk_enable(motg->clk);
+	clk_enable(motg->pclk);
+	if (motg->core_clk)
+		clk_enable(motg->core_clk);
+
+	writel(0, USB_USBINTR);
+	writel(0, USB_OTGSC);
+
+	INIT_WORK(&motg->sm_work, msm_otg_sm_work);
+	ret = request_irq(motg->irq, msm_otg_irq, IRQF_SHARED,
+					"msm_otg", motg);
+	if (ret) {
+		dev_err(&pdev->dev, "request irq failed\n");
+		goto disable_clks;
+	}
+
+	otg->init = msm_otg_reset;
+	otg->set_host = msm_otg_set_host;
+	otg->set_peripheral = msm_otg_set_peripheral;
+
+	otg->io_ops = &msm_otg_io_ops;
+
+	ret = otg_set_transceiver(&motg->otg);
+	if (ret) {
+		dev_err(&pdev->dev, "otg_set_transceiver failed\n");
+		goto free_irq;
+	}
+
+	platform_set_drvdata(pdev, motg);
+	device_init_wakeup(&pdev->dev, 1);
+
+	if (motg->pdata->mode == USB_OTG &&
+			motg->pdata->otg_control == OTG_USER_CONTROL) {
+		ret = msm_otg_debugfs_init(motg);
+		if (ret)
+			dev_dbg(&pdev->dev, "mode debugfs file is"
+					"not available\n");
+	}
+
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+free_irq:
+	free_irq(motg->irq, motg);
+disable_clks:
+	clk_disable(motg->pclk);
+	clk_disable(motg->clk);
+free_regs:
+	iounmap(motg->regs);
+put_core_clk:
+	if (motg->core_clk)
+		clk_put(motg->core_clk);
+	clk_put(motg->pclk);
+put_clk:
+	clk_put(motg->clk);
+put_phy_reset_clk:
+	clk_put(motg->phy_reset_clk);
+free_motg:
+	kfree(motg);
+	return ret;
+}
+
+static int __devexit msm_otg_remove(struct platform_device *pdev)
+{
+	struct msm_otg *motg = platform_get_drvdata(pdev);
+	struct otg_transceiver *otg = &motg->otg;
+	int cnt = 0;
+
+	if (otg->host || otg->gadget)
+		return -EBUSY;
+
+	msm_otg_debugfs_cleanup();
+	cancel_work_sync(&motg->sm_work);
+
+	msm_otg_resume(motg);
+
+	device_init_wakeup(&pdev->dev, 0);
+	pm_runtime_disable(&pdev->dev);
+
+	otg_set_transceiver(NULL);
+	free_irq(motg->irq, motg);
+
+	/*
+	 * Put PHY in low power mode.
+	 */
+	ulpi_read(otg, 0x14);
+	ulpi_write(otg, 0x08, 0x09);
+
+	writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
+	while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
+		if (readl(USB_PORTSC) & PORTSC_PHCD)
+			break;
+		udelay(1);
+		cnt++;
+	}
+	if (cnt >= PHY_SUSPEND_TIMEOUT_USEC)
+		dev_err(otg->dev, "Unable to suspend PHY\n");
+
+	clk_disable(motg->pclk);
+	clk_disable(motg->clk);
+	if (motg->core_clk)
+		clk_disable(motg->core_clk);
+
+	iounmap(motg->regs);
+	pm_runtime_set_suspended(&pdev->dev);
+
+	clk_put(motg->phy_reset_clk);
+	clk_put(motg->pclk);
+	clk_put(motg->clk);
+	if (motg->core_clk)
+		clk_put(motg->core_clk);
+
+	kfree(motg);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+static int msm_otg_runtime_idle(struct device *dev)
+{
+	struct msm_otg *motg = dev_get_drvdata(dev);
+	struct otg_transceiver *otg = &motg->otg;
+
+	dev_dbg(dev, "OTG runtime idle\n");
+
+	/*
+	 * It is observed some times that a spurious interrupt
+	 * comes when PHY is put into LPM immediately after PHY reset.
+	 * This 1 sec delay also prevents entering into LPM immediately
+	 * after asynchronous interrupt.
+	 */
+	if (otg->state != OTG_STATE_UNDEFINED)
+		pm_schedule_suspend(dev, 1000);
+
+	return -EAGAIN;
+}
+
+static int msm_otg_runtime_suspend(struct device *dev)
+{
+	struct msm_otg *motg = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "OTG runtime suspend\n");
+	return msm_otg_suspend(motg);
+}
+
+static int msm_otg_runtime_resume(struct device *dev)
+{
+	struct msm_otg *motg = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "OTG runtime resume\n");
+	return msm_otg_resume(motg);
+}
+#else
+#define msm_otg_runtime_idle	NULL
+#define msm_otg_runtime_suspend	NULL
+#define msm_otg_runtime_resume	NULL
+#endif
+
+#ifdef CONFIG_PM
+static int msm_otg_pm_suspend(struct device *dev)
+{
+	struct msm_otg *motg = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "OTG PM suspend\n");
+	return msm_otg_suspend(motg);
+}
+
+static int msm_otg_pm_resume(struct device *dev)
+{
+	struct msm_otg *motg = dev_get_drvdata(dev);
+	int ret;
+
+	dev_dbg(dev, "OTG PM resume\n");
+
+	ret = msm_otg_resume(motg);
+	if (ret)
+		return ret;
+
+	/*
+	 * Runtime PM Documentation recommends bringing the
+	 * device to full powered state upon resume.
+	 */
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+#else
+#define msm_otg_pm_suspend	NULL
+#define msm_otg_pm_resume	NULL
+#endif
+
+static const struct dev_pm_ops msm_otg_dev_pm_ops = {
+	.runtime_suspend = msm_otg_runtime_suspend,
+	.runtime_resume  = msm_otg_runtime_resume,
+	.runtime_idle    = msm_otg_runtime_idle,
+	.suspend         = msm_otg_pm_suspend,
+	.resume          = msm_otg_pm_resume,
+};
+
+static struct platform_driver msm_otg_driver = {
+	.remove = __devexit_p(msm_otg_remove),
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.pm = &msm_otg_dev_pm_ops,
+	},
+};
+
+static int __init msm_otg_init(void)
+{
+	return platform_driver_probe(&msm_otg_driver, msm_otg_probe);
+}
+
+static void __exit msm_otg_exit(void)
+{
+	platform_driver_unregister(&msm_otg_driver);
+}
+
+module_init(msm_otg_init);
+module_exit(msm_otg_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MSM USB transceiver driver");
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index d335f484fcd..6ca505f333e 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -678,7 +678,8 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev)
 	/* disable complete OTG block */
 	twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
 
-	twl4030_phy_power(twl, 0);
+	if (!twl->asleep)
+		twl4030_phy_power(twl, 0);
 	regulator_put(twl->usb1v5);
 	regulator_put(twl->usb1v8);
 	regulator_put(twl->usb3v1);
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
new file mode 100644
index 00000000000..28f77010364
--- /dev/null
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -0,0 +1,493 @@
+/*
+ * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Hema HK <hemahk@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/usb/otg.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/notifier.h>
+#include <linux/slab.h>
+
+/* usb register definitions */
+#define USB_VENDOR_ID_LSB		0x00
+#define USB_VENDOR_ID_MSB		0x01
+#define USB_PRODUCT_ID_LSB		0x02
+#define USB_PRODUCT_ID_MSB		0x03
+#define USB_VBUS_CTRL_SET		0x04
+#define USB_VBUS_CTRL_CLR		0x05
+#define USB_ID_CTRL_SET			0x06
+#define USB_ID_CTRL_CLR			0x07
+#define USB_VBUS_INT_SRC		0x08
+#define USB_VBUS_INT_LATCH_SET		0x09
+#define USB_VBUS_INT_LATCH_CLR		0x0A
+#define USB_VBUS_INT_EN_LO_SET		0x0B
+#define USB_VBUS_INT_EN_LO_CLR		0x0C
+#define USB_VBUS_INT_EN_HI_SET		0x0D
+#define USB_VBUS_INT_EN_HI_CLR		0x0E
+#define USB_ID_INT_SRC			0x0F
+#define USB_ID_INT_LATCH_SET		0x10
+#define USB_ID_INT_LATCH_CLR		0x11
+
+#define USB_ID_INT_EN_LO_SET		0x12
+#define USB_ID_INT_EN_LO_CLR		0x13
+#define USB_ID_INT_EN_HI_SET		0x14
+#define USB_ID_INT_EN_HI_CLR		0x15
+#define USB_OTG_ADP_CTRL		0x16
+#define USB_OTG_ADP_HIGH		0x17
+#define USB_OTG_ADP_LOW			0x18
+#define USB_OTG_ADP_RISE		0x19
+#define USB_OTG_REVISION		0x1A
+
+/* to be moved to LDO */
+#define TWL6030_MISC2			0xE5
+#define TWL6030_CFG_LDO_PD2		0xF5
+#define TWL6030_BACKUP_REG		0xFA
+
+#define STS_HW_CONDITIONS		0x21
+
+/* In module TWL6030_MODULE_PM_MASTER */
+#define STS_HW_CONDITIONS		0x21
+#define STS_USB_ID			BIT(2)
+
+/* In module TWL6030_MODULE_PM_RECEIVER */
+#define VUSB_CFG_TRANS			0x71
+#define VUSB_CFG_STATE			0x72
+#define VUSB_CFG_VOLTAGE		0x73
+
+/* in module TWL6030_MODULE_MAIN_CHARGE */
+
+#define CHARGERUSB_CTRL1		0x8
+
+#define CONTROLLER_STAT1		0x03
+#define	VBUS_DET			BIT(2)
+
+struct twl6030_usb {
+	struct otg_transceiver	otg;
+	struct device		*dev;
+
+	/* for vbus reporting with irqs disabled */
+	spinlock_t		lock;
+
+	struct regulator		*usb3v3;
+
+	int			irq1;
+	int			irq2;
+	u8			linkstat;
+	u8			asleep;
+	bool			irq_enabled;
+};
+
+#define xceiv_to_twl(x)		container_of((x), struct twl6030_usb, otg);
+
+/*-------------------------------------------------------------------------*/
+
+static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module,
+						u8 data, u8 address)
+{
+	int ret = 0;
+
+	ret = twl_i2c_write_u8(module, data, address);
+	if (ret < 0)
+		dev_err(twl->dev,
+			"Write[0x%x] Error %d\n", address, ret);
+	return ret;
+}
+
+static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
+{
+	u8 data, ret = 0;
+
+	ret = twl_i2c_read_u8(module, &data, address);
+	if (ret >= 0)
+		ret = data;
+	else
+		dev_err(twl->dev,
+			"readb[0x%x,0x%x] Error %d\n",
+					module, address, ret);
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+static int twl6030_set_phy_clk(struct otg_transceiver *x, int on)
+{
+	struct twl6030_usb *twl;
+	struct device *dev;
+	struct twl4030_usb_data *pdata;
+
+	twl = xceiv_to_twl(x);
+	dev  = twl->dev;
+	pdata = dev->platform_data;
+
+	pdata->phy_set_clock(twl->dev, on);
+
+	return 0;
+}
+
+static int twl6030_phy_init(struct otg_transceiver *x)
+{
+	u8 hw_state;
+	struct twl6030_usb *twl;
+	struct device *dev;
+	struct twl4030_usb_data *pdata;
+
+	twl = xceiv_to_twl(x);
+	dev  = twl->dev;
+	pdata = dev->platform_data;
+
+	regulator_enable(twl->usb3v3);
+
+	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+	if (hw_state & STS_USB_ID)
+		pdata->phy_power(twl->dev, 1, 1);
+	else
+		pdata->phy_power(twl->dev, 0, 1);
+
+	return 0;
+}
+
+static void twl6030_phy_shutdown(struct otg_transceiver *x)
+{
+	struct twl6030_usb *twl;
+	struct device *dev;
+	struct twl4030_usb_data *pdata;
+
+	twl = xceiv_to_twl(x);
+	dev  = twl->dev;
+	pdata = dev->platform_data;
+	pdata->phy_power(twl->dev, 0, 0);
+	regulator_disable(twl->usb3v3);
+}
+
+static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
+{
+
+	/* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
+	twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG);
+
+	/* Program CFG_LDO_PD2 register and set VUSB bit */
+	twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2);
+
+	/* Program MISC2 register and set bit VUSB_IN_VBAT */
+	twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2);
+
+	twl->usb3v3 = regulator_get(twl->dev, "vusb");
+	if (IS_ERR(twl->usb3v3))
+		return -ENODEV;
+
+	regulator_enable(twl->usb3v3);
+
+	/* Program the VUSB_CFG_TRANS for ACTIVE state. */
+	twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0x3F,
+						VUSB_CFG_TRANS);
+
+	/* Program the VUSB_CFG_STATE register to ON on all groups. */
+	twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0xE1,
+						VUSB_CFG_STATE);
+
+	/* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
+
+	/*
+	 * Program the USB_ID_CTRL_SET register to enable GND drive
+	 * and the ID comparators
+	 */
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET);
+
+	return 0;
+}
+
+static ssize_t twl6030_usb_vbus_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct twl6030_usb *twl = dev_get_drvdata(dev);
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&twl->lock, flags);
+
+	switch (twl->linkstat) {
+	case USB_EVENT_VBUS:
+	       ret = snprintf(buf, PAGE_SIZE, "vbus\n");
+	       break;
+	case USB_EVENT_ID:
+	       ret = snprintf(buf, PAGE_SIZE, "id\n");
+	       break;
+	case USB_EVENT_NONE:
+	       ret = snprintf(buf, PAGE_SIZE, "none\n");
+	       break;
+	default:
+	       ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
+	}
+	spin_unlock_irqrestore(&twl->lock, flags);
+
+	return ret;
+}
+static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);
+
+static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
+{
+	struct twl6030_usb *twl = _twl;
+	int status;
+	u8 vbus_state, hw_state;
+
+	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+	vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE,
+						CONTROLLER_STAT1);
+	if (!(hw_state & STS_USB_ID)) {
+		if (vbus_state & VBUS_DET) {
+			status = USB_EVENT_VBUS;
+			twl->otg.default_a = false;
+			twl->otg.state = OTG_STATE_B_IDLE;
+		} else {
+			status = USB_EVENT_NONE;
+		}
+		if (status >= 0) {
+			twl->linkstat = status;
+			blocking_notifier_call_chain(&twl->otg.notifier,
+						status, twl->otg.gadget);
+		}
+	}
+	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
+{
+	struct twl6030_usb *twl = _twl;
+	int status = USB_EVENT_NONE;
+	u8 hw_state;
+
+	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+	if (hw_state & STS_USB_ID) {
+
+		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
+		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
+								0x10);
+		status = USB_EVENT_ID;
+		twl->otg.default_a = true;
+		twl->otg.state = OTG_STATE_A_IDLE;
+		blocking_notifier_call_chain(&twl->otg.notifier, status,
+							twl->otg.gadget);
+	} else  {
+		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR,
+								0x10);
+		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
+								0x1);
+	}
+	twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status);
+	twl->linkstat = status;
+
+	return IRQ_HANDLED;
+}
+
+static int twl6030_set_peripheral(struct otg_transceiver *x,
+		struct usb_gadget *gadget)
+{
+	struct twl6030_usb *twl;
+
+	if (!x)
+		return -ENODEV;
+
+	twl = xceiv_to_twl(x);
+	twl->otg.gadget = gadget;
+	if (!gadget)
+		twl->otg.state = OTG_STATE_UNDEFINED;
+
+	return 0;
+}
+
+static int twl6030_enable_irq(struct otg_transceiver *x)
+{
+	struct twl6030_usb *twl = xceiv_to_twl(x);
+
+	twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1);
+	twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
+	twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
+
+	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
+				REG_INT_MSK_LINE_C);
+	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
+				REG_INT_MSK_STS_C);
+	twl6030_usb_irq(twl->irq2, twl);
+	twl6030_usbotg_irq(twl->irq1, twl);
+
+	return 0;
+}
+
+static int twl6030_set_vbus(struct otg_transceiver *x, bool enabled)
+{
+	struct twl6030_usb *twl = xceiv_to_twl(x);
+
+	/*
+	 * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1
+	 * register. This enables boost mode.
+	 */
+	if (enabled)
+		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40,
+						CHARGERUSB_CTRL1);
+	 else
+		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00,
+						CHARGERUSB_CTRL1);
+	return 0;
+}
+
+static int twl6030_set_host(struct otg_transceiver *x, struct usb_bus *host)
+{
+	struct twl6030_usb *twl;
+
+	if (!x)
+		return -ENODEV;
+
+	twl = xceiv_to_twl(x);
+	twl->otg.host = host;
+	if (!host)
+		twl->otg.state = OTG_STATE_UNDEFINED;
+	return 0;
+}
+
+static int __devinit twl6030_usb_probe(struct platform_device *pdev)
+{
+	struct twl6030_usb	*twl;
+	int			status, err;
+	struct twl4030_usb_data *pdata;
+	struct device *dev = &pdev->dev;
+	pdata = dev->platform_data;
+
+	twl = kzalloc(sizeof *twl, GFP_KERNEL);
+	if (!twl)
+		return -ENOMEM;
+
+	twl->dev		= &pdev->dev;
+	twl->irq1		= platform_get_irq(pdev, 0);
+	twl->irq2		= platform_get_irq(pdev, 1);
+	twl->otg.dev		= twl->dev;
+	twl->otg.label		= "twl6030";
+	twl->otg.set_host	= twl6030_set_host;
+	twl->otg.set_peripheral	= twl6030_set_peripheral;
+	twl->otg.set_vbus	= twl6030_set_vbus;
+	twl->otg.init		= twl6030_phy_init;
+	twl->otg.shutdown	= twl6030_phy_shutdown;
+
+	/* init spinlock for workqueue */
+	spin_lock_init(&twl->lock);
+
+	err = twl6030_usb_ldo_init(twl);
+	if (err) {
+		dev_err(&pdev->dev, "ldo init failed\n");
+		kfree(twl);
+		return err;
+	}
+	otg_set_transceiver(&twl->otg);
+
+	platform_set_drvdata(pdev, twl);
+	if (device_create_file(&pdev->dev, &dev_attr_vbus))
+		dev_warn(&pdev->dev, "could not create sysfs file\n");
+
+	BLOCKING_INIT_NOTIFIER_HEAD(&twl->otg.notifier);
+
+	twl->irq_enabled = true;
+	status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"twl6030_usb", twl);
+	if (status < 0) {
+		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+			twl->irq1, status);
+		device_remove_file(twl->dev, &dev_attr_vbus);
+		kfree(twl);
+		return status;
+	}
+
+	status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"twl6030_usb", twl);
+	if (status < 0) {
+		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+			twl->irq2, status);
+		free_irq(twl->irq1, twl);
+		device_remove_file(twl->dev, &dev_attr_vbus);
+		kfree(twl);
+		return status;
+	}
+
+	pdata->phy_init(dev);
+	twl6030_enable_irq(&twl->otg);
+	dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
+
+	return 0;
+}
+
+static int __exit twl6030_usb_remove(struct platform_device *pdev)
+{
+	struct twl6030_usb *twl = platform_get_drvdata(pdev);
+
+	struct twl4030_usb_data *pdata;
+	struct device *dev = &pdev->dev;
+	pdata = dev->platform_data;
+
+	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
+		REG_INT_MSK_LINE_C);
+	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
+			REG_INT_MSK_STS_C);
+	free_irq(twl->irq1, twl);
+	free_irq(twl->irq2, twl);
+	regulator_put(twl->usb3v3);
+	pdata->phy_exit(twl->dev);
+	device_remove_file(twl->dev, &dev_attr_vbus);
+	kfree(twl);
+
+	return 0;
+}
+
+static struct platform_driver twl6030_usb_driver = {
+	.probe		= twl6030_usb_probe,
+	.remove		= __exit_p(twl6030_usb_remove),
+	.driver		= {
+		.name	= "twl6030_usb",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init twl6030_usb_init(void)
+{
+	return platform_driver_register(&twl6030_usb_driver);
+}
+subsys_initcall(twl6030_usb_init);
+
+static void __exit twl6030_usb_exit(void)
+{
+	platform_driver_unregister(&twl6030_usb_driver);
+}
+module_exit(twl6030_usb_exit);
+
+MODULE_ALIAS("platform:twl6030_usb");
+MODULE_AUTHOR("Hema HK <hemahk@ti.com>");
+MODULE_DESCRIPTION("TWL6030 USB transceiver driver");
+MODULE_LICENSE("GPL");