Merge tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB pull request for 3.10-rc1.

  Lots of USB patches here, the majority being USB gadget changes and
  USB-serial driver cleanups, the rest being ARM build fixes / cleanups,
  and individual driver updates.  We also finally got some chipidea
  fixes, which have been delayed for a number of kernel releases, as the
  maintainer has now reappeared.

  All of these have been in linux-next for a while"

* tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits)
  USB: ehci-msm: USB_MSM_OTG needs USB_PHY
  USB: OHCI: avoid conflicting platform drivers
  USB: OMAP: ISP1301 needs USB_PHY
  USB: lpc32xx: ISP1301 needs USB_PHY
  USB: ftdi_sio: enable two UART ports on ST Microconnect Lite
  usb: phy: tegra: don't call into tegra-ehci directly
  usb: phy: phy core cannot yet be a module
  USB: Fix initconst in ehci driver
  usb-storage: CY7C68300A chips do not support Cypress ATACB
  USB: serial: option: Added support Olivetti Olicard 145
  USB: ftdi_sio: correct ST Micro Connect Lite PIDs
  ARM: mxs_defconfig: add CONFIG_USB_PHY
  ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY
  usb: phy: remove exported function from __init section
  usb: gadget: zero: put function instances on unbind
  usb: gadget: f_sourcesink.c: correct a copy-paste misnomer
  usb: gadget: cdc2: fix error return code in cdc_do_config()
  usb: gadget: multi: fix error return code in rndis_do_config()
  usb: gadget: f_obex: fix error return code in obex_bind()
  USB: storage: convert to use module_usb_driver()
  ...

1 files changed, 283 insertions, 0 deletions

diff --git a/drivers/usb/phy/phy-ulpi.c b/drivers/usb/phy/phy-ulpi.c
new file mode 100644
index 00000000000..217339dd7a9
--- /dev/null
+++ b/drivers/usb/phy/phy-ulpi.c
@@ -0,0 +1,283 @@
+/*
+ * Generic ULPI USB transceiver support
+ *
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on sources from
+ *
+ *   Sascha Hauer <s.hauer@pengutronix.de>
+ *   Freescale Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+
+struct ulpi_info {
+	unsigned int	id;
+	char		*name;
+};
+
+#define ULPI_ID(vendor, product) (((vendor) << 16) | (product))
+#define ULPI_INFO(_id, _name)		\
+	{				\
+		.id	= (_id),	\
+		.name	= (_name),	\
+	}
+
+/* ULPI hardcoded IDs, used for probing */
+static struct ulpi_info ulpi_ids[] = {
+	ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"),
+	ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"),
+};
+
+static int ulpi_set_otg_flags(struct usb_phy *phy)
+{
+	unsigned int flags = ULPI_OTG_CTRL_DP_PULLDOWN |
+			     ULPI_OTG_CTRL_DM_PULLDOWN;
+
+	if (phy->flags & ULPI_OTG_ID_PULLUP)
+		flags |= ULPI_OTG_CTRL_ID_PULLUP;
+
+	/*
+	 * ULPI Specification rev.1.1 default
+	 * for Dp/DmPulldown is enabled.
+	 */
+	if (phy->flags & ULPI_OTG_DP_PULLDOWN_DIS)
+		flags &= ~ULPI_OTG_CTRL_DP_PULLDOWN;
+
+	if (phy->flags & ULPI_OTG_DM_PULLDOWN_DIS)
+		flags &= ~ULPI_OTG_CTRL_DM_PULLDOWN;
+
+	if (phy->flags & ULPI_OTG_EXTVBUSIND)
+		flags |= ULPI_OTG_CTRL_EXTVBUSIND;
+
+	return usb_phy_io_write(phy, flags, ULPI_OTG_CTRL);
+}
+
+static int ulpi_set_fc_flags(struct usb_phy *phy)
+{
+	unsigned int flags = 0;
+
+	/*
+	 * ULPI Specification rev.1.1 default
+	 * for XcvrSelect is Full Speed.
+	 */
+	if (phy->flags & ULPI_FC_HS)
+		flags |= ULPI_FUNC_CTRL_HIGH_SPEED;
+	else if (phy->flags & ULPI_FC_LS)
+		flags |= ULPI_FUNC_CTRL_LOW_SPEED;
+	else if (phy->flags & ULPI_FC_FS4LS)
+		flags |= ULPI_FUNC_CTRL_FS4LS;
+	else
+		flags |= ULPI_FUNC_CTRL_FULL_SPEED;
+
+	if (phy->flags & ULPI_FC_TERMSEL)
+		flags |= ULPI_FUNC_CTRL_TERMSELECT;
+
+	/*
+	 * ULPI Specification rev.1.1 default
+	 * for OpMode is Normal Operation.
+	 */
+	if (phy->flags & ULPI_FC_OP_NODRV)
+		flags |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
+	else if (phy->flags & ULPI_FC_OP_DIS_NRZI)
+		flags |= ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI;
+	else if (phy->flags & ULPI_FC_OP_NSYNC_NEOP)
+		flags |= ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP;
+	else
+		flags |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
+
+	/*
+	 * ULPI Specification rev.1.1 default
+	 * for SuspendM is Powered.
+	 */
+	flags |= ULPI_FUNC_CTRL_SUSPENDM;
+
+	return usb_phy_io_write(phy, flags, ULPI_FUNC_CTRL);
+}
+
+static int ulpi_set_ic_flags(struct usb_phy *phy)
+{
+	unsigned int flags = 0;
+
+	if (phy->flags & ULPI_IC_AUTORESUME)
+		flags |= ULPI_IFC_CTRL_AUTORESUME;
+
+	if (phy->flags & ULPI_IC_EXTVBUS_INDINV)
+		flags |= ULPI_IFC_CTRL_EXTERNAL_VBUS;
+
+	if (phy->flags & ULPI_IC_IND_PASSTHRU)
+		flags |= ULPI_IFC_CTRL_PASSTHRU;
+
+	if (phy->flags & ULPI_IC_PROTECT_DIS)
+		flags |= ULPI_IFC_CTRL_PROTECT_IFC_DISABLE;
+
+	return usb_phy_io_write(phy, flags, ULPI_IFC_CTRL);
+}
+
+static int ulpi_set_flags(struct usb_phy *phy)
+{
+	int ret;
+
+	ret = ulpi_set_otg_flags(phy);
+	if (ret)
+		return ret;
+
+	ret = ulpi_set_ic_flags(phy);
+	if (ret)
+		return ret;
+
+	return ulpi_set_fc_flags(phy);
+}
+
+static int ulpi_check_integrity(struct usb_phy *phy)
+{
+	int ret, i;
+	unsigned int val = 0x55;
+
+	for (i = 0; i < 2; i++) {
+		ret = usb_phy_io_write(phy, val, ULPI_SCRATCH);
+		if (ret < 0)
+			return ret;
+
+		ret = usb_phy_io_read(phy, ULPI_SCRATCH);
+		if (ret < 0)
+			return ret;
+
+		if (ret != val) {
+			pr_err("ULPI integrity check: failed!");
+			return -ENODEV;
+		}
+		val = val << 1;
+	}
+
+	pr_info("ULPI integrity check: passed.\n");
+
+	return 0;
+}
+
+static int ulpi_init(struct usb_phy *phy)
+{
+	int i, vid, pid, ret;
+	u32 ulpi_id = 0;
+
+	for (i = 0; i < 4; i++) {
+		ret = usb_phy_io_read(phy, ULPI_PRODUCT_ID_HIGH - i);
+		if (ret < 0)
+			return ret;
+		ulpi_id = (ulpi_id << 8) | ret;
+	}
+	vid = ulpi_id & 0xffff;
+	pid = ulpi_id >> 16;
+
+	pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid);
+
+	for (i = 0; i < ARRAY_SIZE(ulpi_ids); i++) {
+		if (ulpi_ids[i].id == ULPI_ID(vid, pid)) {
+			pr_info("Found %s ULPI transceiver.\n",
+				ulpi_ids[i].name);
+			break;
+		}
+	}
+
+	ret = ulpi_check_integrity(phy);
+	if (ret)
+		return ret;
+
+	return ulpi_set_flags(phy);
+}
+
+static int ulpi_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+	struct usb_phy *phy = otg->phy;
+	unsigned int flags = usb_phy_io_read(phy, ULPI_IFC_CTRL);
+
+	if (!host) {
+		otg->host = NULL;
+		return 0;
+	}
+
+	otg->host = host;
+
+	flags &= ~(ULPI_IFC_CTRL_6_PIN_SERIAL_MODE |
+		   ULPI_IFC_CTRL_3_PIN_SERIAL_MODE |
+		   ULPI_IFC_CTRL_CARKITMODE);
+
+	if (phy->flags & ULPI_IC_6PIN_SERIAL)
+		flags |= ULPI_IFC_CTRL_6_PIN_SERIAL_MODE;
+	else if (phy->flags & ULPI_IC_3PIN_SERIAL)
+		flags |= ULPI_IFC_CTRL_3_PIN_SERIAL_MODE;
+	else if (phy->flags & ULPI_IC_CARKIT)
+		flags |= ULPI_IFC_CTRL_CARKITMODE;
+
+	return usb_phy_io_write(phy, flags, ULPI_IFC_CTRL);
+}
+
+static int ulpi_set_vbus(struct usb_otg *otg, bool on)
+{
+	struct usb_phy *phy = otg->phy;
+	unsigned int flags = usb_phy_io_read(phy, ULPI_OTG_CTRL);
+
+	flags &= ~(ULPI_OTG_CTRL_DRVVBUS | ULPI_OTG_CTRL_DRVVBUS_EXT);
+
+	if (on) {
+		if (phy->flags & ULPI_OTG_DRVVBUS)
+			flags |= ULPI_OTG_CTRL_DRVVBUS;
+
+		if (phy->flags & ULPI_OTG_DRVVBUS_EXT)
+			flags |= ULPI_OTG_CTRL_DRVVBUS_EXT;
+	}
+
+	return usb_phy_io_write(phy, flags, ULPI_OTG_CTRL);
+}
+
+struct usb_phy *
+otg_ulpi_create(struct usb_phy_io_ops *ops,
+		unsigned int flags)
+{
+	struct usb_phy *phy;
+	struct usb_otg *otg;
+
+	phy = kzalloc(sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return NULL;
+
+	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+	if (!otg) {
+		kfree(phy);
+		return NULL;
+	}
+
+	phy->label	= "ULPI";
+	phy->flags	= flags;
+	phy->io_ops	= ops;
+	phy->otg	= otg;
+	phy->init	= ulpi_init;
+
+	otg->phy	= phy;
+	otg->set_host	= ulpi_set_host;
+	otg->set_vbus	= ulpi_set_vbus;
+
+	return phy;
+}
+EXPORT_SYMBOL_GPL(otg_ulpi_create);
+