tty: usb-serial krefs

Use kref in the USB serial drivers so that we don't free tty structures
from under the URB receive handlers as has historically been the case if
you were unlucky. This also gives us a framework for general tty drivers to
use tty_port objects and refcount.

Contains two err->dev_err changes merged together to fix clashes in the
-next tree.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 19 insertions, 7 deletions

diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index cb4c54316cf..541dd8e6e7a 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -572,7 +572,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
 								int flush)
 {
 	int baud_rate;
-	struct tty_struct *tty = port->port->port.tty;
+	struct tty_struct *tty = tty_port_tty_get(&port->port->port);
 	wait_queue_t wait;
 	unsigned long flags;
 
@@ -599,6 +599,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
 	if (flush)
 		edge_buf_clear(port->ep_out_buf);
 	spin_unlock_irqrestore(&port->ep_lock, flags);
+	tty_kref_put(tty);
 
 	/* wait for data to drain from the device */
 	timeout += jiffies;
@@ -1554,7 +1555,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
 	/* Save the new modem status */
 	edge_port->shadow_msr = msr & 0xf0;
 
-	tty = edge_port->port->port.tty;
+	tty = tty_port_tty_get(&edge_port->port->port);
 	/* handle CTS flow control */
 	if (tty && C_CRTSCTS(tty)) {
 		if (msr & EDGEPORT_MSR_CTS) {
@@ -1564,6 +1565,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
 			tty->hw_stopped = 1;
 		}
 	}
+	tty_kref_put(tty);
 
 	return;
 }
@@ -1574,6 +1576,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
 	struct async_icount *icount;
 	__u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR |
 						LSR_FRM_ERR | LSR_BREAK));
+	struct tty_struct *tty;
 
 	dbg("%s - %02x", __func__, new_lsr);
 
@@ -1587,8 +1590,13 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
 		new_lsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
 
 	/* Place LSR data byte into Rx buffer */
-	if (lsr_data && edge_port->port->port.tty)
-		edge_tty_recv(&edge_port->port->dev, edge_port->port->port.tty, &data, 1);
+	if (lsr_data) {
+		tty = tty_port_tty_get(&edge_port->port->port);
+		if (tty) {
+			edge_tty_recv(&edge_port->port->dev, tty, &data, 1);
+			tty_kref_put(tty);
+		}
+	}
 
 	/* update input line counters */
 	icount = &edge_port->icount;
@@ -1749,7 +1757,7 @@ static void edge_bulk_in_callback(struct urb *urb)
 		++data;
 	}
 
-	tty = edge_port->port->port.tty;
+	tty = tty_port_tty_get(&edge_port->port->port);
 	if (tty && urb->actual_length) {
 		usb_serial_debug_data(debug, &edge_port->port->dev,
 					__func__, urb->actual_length, data);
@@ -1761,6 +1769,7 @@ static void edge_bulk_in_callback(struct urb *urb)
 							urb->actual_length);
 		edge_port->icount.rx += urb->actual_length;
 	}
+	tty_kref_put(tty);
 
 exit:
 	/* continue read unless stopped */
@@ -1796,6 +1805,7 @@ static void edge_bulk_out_callback(struct urb *urb)
 	struct usb_serial_port *port = urb->context;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	int status = urb->status;
+	struct tty_struct *tty;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -1818,7 +1828,9 @@ static void edge_bulk_out_callback(struct urb *urb)
 	}
 
 	/* send any buffered data */
-	edge_send(port->port.tty);
+	tty = tty_port_tty_get(&port->port);
+	edge_send(tty);
+	tty_kref_put(tty);
 }
 
 static int edge_open(struct tty_struct *tty,
@@ -1876,7 +1888,7 @@ static int edge_open(struct tty_struct *tty,
 
 	/* set up the port settings */
 	if (tty)
-		edge_set_termios(tty, port, port->port.tty->termios);
+		edge_set_termios(tty, port, tty->termios);
 
 	/* open up the port */