Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 491 insertions, 0 deletions

diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
new file mode 100644
index 00000000000..11105d74f46
--- /dev/null
+++ b/drivers/usb/serial/ipw.c
@@ -0,0 +1,491 @@
+/*
+ * IPWireless 3G UMTS TDD Modem driver (USB connected)
+ *
+ *   Copyright (C) 2004 Roelf Diedericks <roelfd@inet.co.za>
+ *   Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ * All information about the device was acquired using SnoopyPro
+ * on MSFT's O/S, and examing the MSFT drivers' debug output 
+ * (insanely left _on_ in the enduser version)
+ *
+ * It was written out of frustration with the IPWireless USB modem
+ * supplied by Axity3G/Sentech South Africa not supporting
+ * Linux whatsoever.
+ *
+ * Nobody provided any proprietary information that was not already 
+ * available for this device.
+ * 
+ * The modem adheres to the "3GPP TS  27.007 AT command set for 3G 
+ * User Equipment (UE)" standard, available from 
+ * http://www.3gpp.org/ftp/Specs/html-info/27007.htm
+ *
+ * The code was only tested the IPWireless handheld modem distributed
+ * in South Africa by Sentech.
+ * 
+ * It may work for Woosh Inc in .nz too, as it appears they use the
+ * same kit.
+ *
+ * There is still some work to be done in terms of handling 
+ * DCD, DTR, RTS, CTS which are currently faked.
+ * It's good enough for PPP at this point. It's based off all kinds of
+ * code found in usb/serial and usb/class
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/usb.h>
+#include <asm/uaccess.h>
+#include "usb-serial.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION	"v0.3"
+#define DRIVER_AUTHOR	"Roelf Diedericks"
+#define DRIVER_DESC	"IPWireless tty driver"
+
+#define IPW_TTY_MAJOR	240	/* real device node major id, experimental range */
+#define IPW_TTY_MINORS	256	/* we support 256 devices, dunno why, it'd be insane :) */
+
+#define USB_IPW_MAGIC	0x6d02	/* magic number for ipw struct */
+
+
+/* Message sizes */
+#define EVENT_BUFFER_SIZE	0xFF
+#define CHAR2INT16(c1,c0)	(((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff))
+#define NUM_BULK_URBS		24
+#define NUM_CONTROL_URBS	16
+
+/* vendor/product pairs that are known work with this driver*/
+#define IPW_VID		0x0bc3
+#define IPW_PID		0x0001
+
+
+/* Vendor commands: */
+
+/* baud rates */
+enum {
+	ipw_sio_b256000 = 0x000e,
+	ipw_sio_b128000 = 0x001d,
+	ipw_sio_b115200 = 0x0020,
+	ipw_sio_b57600  = 0x0040,
+	ipw_sio_b56000  = 0x0042,
+	ipw_sio_b38400  = 0x0060,
+	ipw_sio_b19200  = 0x00c0,
+	ipw_sio_b14400  = 0x0100,
+	ipw_sio_b9600   = 0x0180,
+	ipw_sio_b4800   = 0x0300,
+	ipw_sio_b2400   = 0x0600,
+	ipw_sio_b1200   = 0x0c00,
+	ipw_sio_b600    = 0x1800
+};
+
+/* data bits */
+#define ipw_dtb_7		0x700
+#define ipw_dtb_8		0x810	// ok so the define is misleading, I know, but forces 8,n,1
+					// I mean, is there a point to any other setting these days? :)	
+
+/* usb control request types : */
+#define IPW_SIO_RXCTL		0x00	// control bulk rx channel transmissions, value=1/0 (on/off)
+#define IPW_SIO_SET_BAUD	0x01	// set baud, value=requested ipw_sio_bxxxx
+#define IPW_SIO_SET_LINE	0x03	// set databits, parity. value=ipw_dtb_x
+#define IPW_SIO_SET_PIN		0x03	// set/clear dtr/rts value=ipw_pin_xxx
+#define IPW_SIO_POLL		0x08	// get serial port status byte, call with value=0
+#define IPW_SIO_INIT		0x11	// initializes ? value=0 (appears as first thing todo on open)
+#define IPW_SIO_PURGE		0x12	// purge all transmissions?, call with value=numchar_to_purge
+#define IPW_SIO_HANDFLOW	0x13	// set xon/xoff limits value=0, and a buffer of 0x10 bytes
+#define IPW_SIO_SETCHARS	0x13	// set the flowcontrol special chars, value=0, buf=6 bytes, 
+					// last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13
+
+/* values used for request IPW_SIO_SET_PIN */
+#define IPW_PIN_SETDTR		0x101
+#define IPW_PIN_SETRTS		0x202
+#define IPW_PIN_CLRDTR		0x100
+#define IPW_PIN_CLRRTS		0x200 // unconfirmed
+
+/* values used for request IPW_SIO_RXCTL */
+#define IPW_RXBULK_ON		1
+#define IPW_RXBULK_OFF		0
+
+/* various 16 byte hardcoded transferbuffers used by flow control */
+#define IPW_BYTES_FLOWINIT	{ 0x01, 0, 0, 0, 0x40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+
+/* Interpretation of modem status lines */
+/* These need sorting out by individually connecting pins and checking
+ * results. FIXME!
+ * When data is being sent we see 0x30 in the lower byte; this must
+ * contain DSR and CTS ...
+ */
+#define IPW_DSR			((1<<4) | (1<<5))
+#define IPW_CTS			((1<<5) | (1<<4))
+
+#define IPW_WANTS_TO_SEND	0x30
+//#define IPW_DTR			/* Data Terminal Ready */
+//#define IPW_CTS			/* Clear To Send */
+//#define IPW_CD			/* Carrier Detect */
+//#define IPW_DSR			/* Data Set Ready */
+//#define IPW_RxD			/* Receive pin */
+
+//#define IPW_LE
+//#define IPW_RTS		
+//#define IPW_ST		
+//#define IPW_SR		
+//#define IPW_RI			/* Ring Indicator */
+
+static struct usb_device_id usb_ipw_ids[] = {
+	{ USB_DEVICE(IPW_VID, IPW_PID) },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(usb, usb_ipw_ids);
+
+static struct usb_driver usb_ipw_driver = {
+	.owner =	THIS_MODULE,
+	.name =		"ipwtty",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	usb_ipw_ids,
+};
+
+static int debug;
+
+static void ipw_read_bulk_callback(struct urb *urb, struct pt_regs *regs)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	struct tty_struct *tty;
+	int i;
+	int result;
+
+	dbg("%s - port %d", __FUNCTION__, port->number);
+
+	if (urb->status) {
+		dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
+		return;
+	}
+
+	usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+
+	tty = port->tty;
+	if (tty && urb->actual_length) {
+		for (i = 0; i < urb->actual_length ; ++i) {
+			/* if we insert more than TTY_FLIPBUF_SIZE characters, we drop them. */
+			if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
+				tty_flip_buffer_push(tty);
+			}
+			/* this doesn't actually push the data through unless tty->low_latency is set */
+			tty_insert_flip_char(tty, data[i], 0);
+		}
+		tty_flip_buffer_push(tty);
+	}
+
+	/* Continue trying to always read  */
+	usb_fill_bulk_urb (port->read_urb, port->serial->dev,
+			   usb_rcvbulkpipe(port->serial->dev,
+					   port->bulk_in_endpointAddress),
+			   port->read_urb->transfer_buffer,
+			   port->read_urb->transfer_buffer_length,
+			   ipw_read_bulk_callback, port);
+	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+	if (result)
+		dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+	return;
+}
+
+static int ipw_open(struct usb_serial_port *port, struct file *filp)
+{
+	struct usb_device *dev = port->serial->dev;
+	u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT;
+	u8 *buf_flow_init;
+	int result;
+
+	dbg("%s", __FUNCTION__);
+
+	buf_flow_init = kmalloc(16, GFP_KERNEL);
+	if (!buf_flow_init)
+		return -ENOMEM;
+	memcpy(buf_flow_init, buf_flow_static, 16);
+
+	if (port->tty)
+		port->tty->low_latency = 1;
+
+	/* --1: Tell the modem to initialize (we think) From sniffs this is always the
+	 * first thing that gets sent to the modem during opening of the device */
+	dbg("%s: Sending SIO_INIT (we guess)",__FUNCTION__);
+	result = usb_control_msg(dev, usb_sndctrlpipe(dev,0),
+				 IPW_SIO_INIT,
+				 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+				 0,
+				 0, /* index */
+				 NULL,
+				 0,
+				 100000);
+	if (result < 0)
+		dev_err(&port->dev, "Init of modem failed (error = %d)", result);
+
+	/* reset the bulk pipes */
+	usb_clear_halt(dev, usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress));
+	usb_clear_halt(dev, usb_sndbulkpipe(dev, port->bulk_out_endpointAddress));
+
+	/*--2: Start reading from the device */	
+	dbg("%s: setting up bulk read callback",__FUNCTION__);
+	usb_fill_bulk_urb(port->read_urb, dev,
+			  usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
+			  port->bulk_in_buffer,
+			  port->bulk_in_size,
+			  ipw_read_bulk_callback, port);
+	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
+	if (result < 0)
+		dbg("%s - usb_submit_urb(read bulk) failed with status %d", __FUNCTION__, result);
+
+	/*--3: Tell the modem to open the floodgates on the rx bulk channel */
+	dbg("%s:asking modem for RxRead (RXBULK_ON)",__FUNCTION__);
+	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 IPW_SIO_RXCTL,
+				 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+				 IPW_RXBULK_ON,
+				 0, /* index */
+				 NULL,
+				 0,
+				 100000);
+	if (result < 0) 
+		dev_err(&port->dev, "Enabling bulk RxRead failed (error = %d)", result);
+
+	/*--4: setup the initial flowcontrol */
+	dbg("%s:setting init flowcontrol (%s)",__FUNCTION__,buf_flow_init);
+	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 IPW_SIO_HANDFLOW,
+				 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+				 0,
+				 0,
+				 buf_flow_init,
+				 0x10,
+				 200000);
+	if (result < 0)
+		dev_err(&port->dev, "initial flowcontrol failed (error = %d)", result);
+
+
+	/*--5: raise the dtr */
+	dbg("%s:raising dtr",__FUNCTION__);
+	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 IPW_SIO_SET_PIN,
+				 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+				 IPW_PIN_SETDTR,
+				 0,
+				 NULL,
+				 0,
+				 200000);
+	if (result < 0)
+		dev_err(&port->dev, "setting dtr failed (error = %d)", result);
+
+	/*--6: raise the rts */
+	dbg("%s:raising rts",__FUNCTION__);
+	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 IPW_SIO_SET_PIN,
+				 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+				 IPW_PIN_SETRTS,
+				 0,
+				 NULL,
+				 0,
+				 200000);
+	if (result < 0)
+		dev_err(&port->dev, "setting dtr failed (error = %d)", result);
+	
+	kfree(buf_flow_init);
+	return 0;
+}
+
+static void ipw_close(struct usb_serial_port *port, struct file * filp)
+{
+	struct usb_device *dev = port->serial->dev;
+	int result;
+
+	if (tty_hung_up_p(filp)) {
+		dbg("%s: tty_hung_up_p ...", __FUNCTION__);
+		return;
+	}
+
+	/*--1: drop the dtr */
+	dbg("%s:dropping dtr",__FUNCTION__);
+	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 IPW_SIO_SET_PIN,
+				 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+				 IPW_PIN_CLRDTR,
+				 0,
+				 NULL,
+				 0,
+				 200000);
+	if (result < 0)
+		dev_err(&port->dev, "dropping dtr failed (error = %d)", result);
+
+	/*--2: drop the rts */
+	dbg("%s:dropping rts",__FUNCTION__);
+	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 IPW_SIO_SET_PIN, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+				 IPW_PIN_CLRRTS,
+				 0,
+				 NULL,
+				 0,
+				 200000);
+	if (result < 0)
+		dev_err(&port->dev, "dropping rts failed (error = %d)", result);
+
+
+	/*--3: purge */
+	dbg("%s:sending purge",__FUNCTION__);
+	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 IPW_SIO_PURGE, USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+				 0x03,
+				 0,
+				 NULL,
+				 0,
+				 200000);
+	if (result < 0)
+		dev_err(&port->dev, "purge failed (error = %d)", result);
+
+
+	/* send RXBULK_off (tell modem to stop transmitting bulk data on rx chan) */
+	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 IPW_SIO_RXCTL,
+				 USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
+				 IPW_RXBULK_OFF,
+				 0, /* index */
+				 NULL,
+				 0,
+				 100000);
+
+	if (result < 0)
+		dev_err(&port->dev, "Disabling bulk RxRead failed (error = %d)", result);
+
+	/* shutdown any in-flight urbs that we know about */
+	usb_kill_urb(port->read_urb);
+	usb_kill_urb(port->write_urb);
+}
+
+static void ipw_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
+{
+	struct usb_serial_port *port = urb->context;
+
+	dbg("%s", __FUNCTION__);
+
+	if (urb->status)
+		dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
+
+	schedule_work(&port->work);
+}
+
+static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int count)
+{
+	struct usb_device *dev = port->serial->dev;
+	int ret;
+
+	dbg("%s: TOP: count=%d, in_interrupt=%ld", __FUNCTION__,
+		count, in_interrupt() );
+
+	if (count == 0) {
+		dbg("%s - write request of 0 bytes", __FUNCTION__);
+		return 0;
+	}
+	
+	/* Racy and broken, FIXME properly! */
+	if (port->write_urb->status == -EINPROGRESS)
+		return 0;
+
+	count = min(count, port->bulk_out_size);
+	memcpy(port->bulk_out_buffer, buf, count);
+
+	dbg("%s count now:%d", __FUNCTION__, count);
+	
+	usb_fill_bulk_urb(port->write_urb, dev,
+			  usb_sndbulkpipe(dev, port->bulk_out_endpointAddress),
+			  port->write_urb->transfer_buffer,
+			  count,
+			  ipw_write_bulk_callback,
+			  port);
+
+	ret = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+	if (ret != 0) {
+		dbg("%s - usb_submit_urb(write bulk) failed with error = %d", __FUNCTION__, ret);
+		return ret;
+	}
+
+	dbg("%s returning %d", __FUNCTION__, count);
+	return count;
+} 
+
+static int ipw_probe(struct usb_serial_port *port)
+{
+	return 0;
+}
+
+static int ipw_disconnect(struct usb_serial_port *port)
+{
+	usb_set_serial_port_data(port, NULL);
+	return 0;
+}
+
+static struct usb_serial_device_type ipw_device = {
+	.owner =		THIS_MODULE,
+	.name =			"IPWireless converter",
+	.short_name =		"ipw",
+	.id_table =		usb_ipw_ids,
+	.num_interrupt_in =	NUM_DONT_CARE,
+	.num_bulk_in =		1,
+	.num_bulk_out =		1,
+	.num_ports =		1,
+	.open =			ipw_open,
+	.close =		ipw_close,
+	.port_probe = 		ipw_probe,
+	.port_remove =		ipw_disconnect,
+	.write =		ipw_write,
+	.write_bulk_callback =	ipw_write_bulk_callback,
+	.read_bulk_callback =	ipw_read_bulk_callback,
+};
+
+
+
+static int usb_ipw_init(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&ipw_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&usb_ipw_driver);
+	if (retval) {
+		usb_serial_deregister(&ipw_device);
+		return retval;
+	}
+	info(DRIVER_DESC " " DRIVER_VERSION);
+	return 0;
+}
+
+static void usb_ipw_exit(void)
+{
+	usb_deregister(&usb_ipw_driver);
+	usb_serial_deregister(&ipw_device);
+}
+
+module_init(usb_ipw_init);
+module_exit(usb_ipw_exit);
+
+/* Module information */
+MODULE_AUTHOR( DRIVER_AUTHOR );
+MODULE_DESCRIPTION( DRIVER_DESC );
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");