USB: serial: ports: add minor and port number

The usb_serial_port structure had the number field, which was the minor
number for the port, which almost no one really cared about.  They
really wanted the number of the port within the device, which you had to
subtract from the minor of the parent usb_serial_device structure.  To
clean this up, provide the real minor number of the port, and the number
of the port within the serial device separately, as these numbers might
not be related in the future.

Bonus is that this cleans up a lot of logic in the drivers, and saves
lines overall.

Tested-by: Tobias Winter <tobias@linuxdingsda.de>
Reviewed-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

--
 drivers/staging/serqt_usb2/serqt_usb2.c |   21 +++--------
 drivers/usb/serial/ark3116.c            |    2 -
 drivers/usb/serial/bus.c                |    6 +--
 drivers/usb/serial/console.c            |    2 -
 drivers/usb/serial/cp210x.c             |    2 -
 drivers/usb/serial/cypress_m8.c         |    4 +-
 drivers/usb/serial/digi_acceleport.c    |    6 ---
 drivers/usb/serial/f81232.c             |    5 +-
 drivers/usb/serial/garmin_gps.c         |    6 +--
 drivers/usb/serial/io_edgeport.c        |   58 ++++++++++++--------------------
 drivers/usb/serial/io_ti.c              |   21 ++++-------
 drivers/usb/serial/keyspan.c            |   29 +++++++---------
 drivers/usb/serial/metro-usb.c          |    4 +-
 drivers/usb/serial/mos7720.c            |   37 +++++++++-----------
 drivers/usb/serial/mos7840.c            |   52 +++++++++-------------------
 drivers/usb/serial/opticon.c            |    2 -
 drivers/usb/serial/pl2303.c             |    2 -
 drivers/usb/serial/quatech2.c           |    7 +--
 drivers/usb/serial/sierra.c             |    2 -
 drivers/usb/serial/ti_usb_3410_5052.c   |   10 ++---
 drivers/usb/serial/usb-serial.c         |    7 ++-
 drivers/usb/serial/usb_wwan.c           |    2 -
 drivers/usb/serial/whiteheat.c          |   20 +++++------
 include/linux/usb/serial.h              |    6 ++-
 24 files changed, 133 insertions(+), 180 deletions(-)

1 files changed, 18 insertions, 19 deletions

diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index f27c621a929..f79ae7fe37f 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1047,7 +1047,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 	  *
 	  * 0x08 : SP1/2 Control Reg
 	  */
-	port_number = port->number - port->serial->minor;
+	port_number = port->port_number;
 	read_mos_reg(serial, port_number, LSR, &data);
 
 	dev_dbg(&port->dev, "SS::%p LSR:%x\n", mos7720_port, data);
@@ -1066,7 +1066,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	write_mos_reg(serial, port_number, SP_CONTROL_REG, 0x00);
 	read_mos_reg(serial, dummy, SP_CONTROL_REG, &data);
-	data = data | (port->number - port->serial->minor + 1);
+	data = data | (port->port_number + 1);
 	write_mos_reg(serial, dummy, SP_CONTROL_REG, data);
 	mos7720_port->shadowLCR = 0x83;
 	write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
@@ -1147,8 +1147,8 @@ static void mos7720_close(struct usb_serial_port *port)
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 
-	write_mos_reg(serial, port->number - port->serial->minor, MCR, 0x00);
-	write_mos_reg(serial, port->number - port->serial->minor, IER, 0x00);
+	write_mos_reg(serial, port->port_number, MCR, 0x00);
+	write_mos_reg(serial, port->port_number, IER, 0x00);
 
 	mos7720_port->open = 0;
 }
@@ -1172,8 +1172,7 @@ static void mos7720_break(struct tty_struct *tty, int break_state)
 		data = mos7720_port->shadowLCR & ~UART_LCR_SBC;
 
 	mos7720_port->shadowLCR  = data;
-	write_mos_reg(serial, port->number - port->serial->minor,
-		      LCR, mos7720_port->shadowLCR);
+	write_mos_reg(serial, port->port_number, LCR, mos7720_port->shadowLCR);
 }
 
 /*
@@ -1304,8 +1303,8 @@ static void mos7720_throttle(struct tty_struct *tty)
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios.c_cflag & CRTSCTS) {
 		mos7720_port->shadowMCR &= ~UART_MCR_RTS;
-		write_mos_reg(port->serial, port->number - port->serial->minor,
-			      MCR, mos7720_port->shadowMCR);
+		write_mos_reg(port->serial, port->port_number, MCR,
+			      mos7720_port->shadowMCR);
 		if (status != 0)
 			return;
 	}
@@ -1336,8 +1335,8 @@ static void mos7720_unthrottle(struct tty_struct *tty)
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios.c_cflag & CRTSCTS) {
 		mos7720_port->shadowMCR |= UART_MCR_RTS;
-		write_mos_reg(port->serial, port->number - port->serial->minor,
-			      MCR, mos7720_port->shadowMCR);
+		write_mos_reg(port->serial, port->port_number, MCR,
+			      mos7720_port->shadowMCR);
 		if (status != 0)
 			return;
 	}
@@ -1361,7 +1360,7 @@ static int set_higher_rates(struct moschip_port *mos7720_port,
 	 *      Init Sequence for higher rates
 	 ***********************************************/
 	dev_dbg(&port->dev, "Sending Setting Commands ..........\n");
-	port_number = port->number - port->serial->minor;
+	port_number = port->port_number;
 
 	write_mos_reg(serial, port_number, IER, 0x00);
 	write_mos_reg(serial, port_number, FCR, 0x00);
@@ -1487,7 +1486,7 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
 	port = mos7720_port->port;
 	serial = port->serial;
 
-	number = port->number - port->serial->minor;
+	number = port->port_number;
 	dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudrate);
 
 	/* Calculate the Divisor */
@@ -1538,7 +1537,7 @@ static void change_port_settings(struct tty_struct *tty,
 
 	port = mos7720_port->port;
 	serial = port->serial;
-	port_number = port->number - port->serial->minor;
+	port_number = port->port_number;
 
 	if (!mos7720_port->open) {
 		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
@@ -1731,7 +1730,7 @@ static int get_lsr_info(struct tty_struct *tty,
 	struct usb_serial_port *port = tty->driver_data;
 	unsigned int result = 0;
 	unsigned char data = 0;
-	int port_number = port->number - port->serial->minor;
+	int port_number = port->port_number;
 	int count;
 
 	count = mos7720_chars_in_buffer(tty);
@@ -1793,8 +1792,8 @@ static int mos7720_tiocmset(struct tty_struct *tty,
 		mcr &= ~UART_MCR_LOOP;
 
 	mos7720_port->shadowMCR = mcr;
-	write_mos_reg(port->serial, port->number - port->serial->minor,
-		      MCR, mos7720_port->shadowMCR);
+	write_mos_reg(port->serial, port->port_number, MCR,
+		      mos7720_port->shadowMCR);
 
 	return 0;
 }
@@ -1838,8 +1837,8 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 	}
 
 	mos7720_port->shadowMCR = mcr;
-	write_mos_reg(port->serial, port->number - port->serial->minor,
-		      MCR, mos7720_port->shadowMCR);
+	write_mos_reg(port->serial, port->port_number, MCR,
+		      mos7720_port->shadowMCR);
 
 	return 0;
 }
@@ -1856,7 +1855,7 @@ static int get_serial_info(struct moschip_port *mos7720_port,
 
 	tmp.type		= PORT_16550A;
 	tmp.line		= mos7720_port->port->serial->minor;
-	tmp.port		= mos7720_port->port->number;
+	tmp.port		= mos7720_port->port->port_number;
 	tmp.irq			= 0;
 	tmp.flags		= ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 	tmp.xmit_fifo_size	= NUM_URBS * URB_TRANSFER_BUFFER_SIZE;