Merge tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB changes from Greg Kroah-Hartman:
 "Here is the big USB pull request for 3.7-rc1

  There are lots of gadget driver changes (including copying a bunch of
  files into the drivers/staging/ccg/ directory so that the other gadget
  drivers can be fixed up properly without breaking that driver), and we
  remove the old obsolete ub.c driver from the tree.

  There are also the usual XHCI set of updates, and other various driver
  changes and updates.  We also are trying hard to remove the old dbg()
  macro, but the final bits of that removal will be coming in through
  the networking tree before we can delete it for good.

  All of these patches have been in the linux-next tree.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up several annoying - but fairly mindless - conflicts due to the
termios structure having moved into the tty device, and often clashing
with dbg -> dev_dbg conversion.

* tag 'usb-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (339 commits)
  USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/misc
  USB: uas: fix gcc warning
  USB: uas: fix locking
  USB: Fix race condition when removing host controllers
  USB: uas: add locking
  USB: uas: fix abort
  USB: uas: remove aborted field, replace with status bit.
  USB: uas: fix task management
  USB: uas: keep track of command urbs
  xhci: Intel Panther Point BEI quirk.
  powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHY
  USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
  Revert "usb : Add sysfs files to control port power."
  USB: serial: remove vizzini driver
  usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems
  Increase XHCI suspend timeout to 16ms
  USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
  USB: sierra_ms: don't keep unused variable
  fsl/usb: Add support for USB controller version 2.4
  USB: qcaux: add Pantech vendor class match
  ...

1 files changed, 183 insertions, 295 deletions

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 402c32d7acc..d6d4eeca8c6 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -252,8 +252,6 @@ struct moschip_port {
 	struct timer_list led_timer2;	/* Timer for LED off */
 };
 
-static bool debug;
-
 /*
  * mos7840_set_reg_sync
  * 	To set the Control register by calling usb_fill_control_urb function
@@ -265,7 +263,7 @@ static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg,
 {
 	struct usb_device *dev = port->serial->dev;
 	val = val & 0x00ff;
-	dbg("mos7840_set_reg_sync offset is %x, value %x", reg, val);
+	dev_dbg(&port->dev, "mos7840_set_reg_sync offset is %x, value %x\n", reg, val);
 
 	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
 			       MCS_WR_RTYPE, val, reg, NULL, 0,
@@ -293,7 +291,7 @@ static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg,
 			      MCS_RD_RTYPE, 0, reg, buf, VENDOR_READ_LENGTH,
 			      MOS_WDR_TIMEOUT);
 	*val = buf[0];
-	dbg("mos7840_get_reg_sync offset is %x, return val %x", reg, *val);
+	dev_dbg(&port->dev, "%s offset is %x, return val %x\n", __func__, reg, *val);
 
 	kfree(buf);
 	return ret;
@@ -316,21 +314,16 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
 	if (port->serial->num_ports == 4) {
 		val |= (((__u16) port->number -
 				(__u16) (port->serial->minor)) + 1) << 8;
-		dbg("mos7840_set_uart_reg application number is %x", val);
 	} else {
 		if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
 			val |= (((__u16) port->number -
 			      (__u16) (port->serial->minor)) + 1) << 8;
-			dbg("mos7840_set_uart_reg application number is %x",
-			    val);
 		} else {
-			val |=
-			    (((__u16) port->number -
+			val |= (((__u16) port->number -
 			      (__u16) (port->serial->minor)) + 2) << 8;
-			dbg("mos7840_set_uart_reg application number is %x",
-			    val);
 		}
 	}
+	dev_dbg(&port->dev, "%s application number is %x\n", __func__, val);
 	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
 			       MCS_WR_RTYPE, val, reg, NULL, 0,
 			       MOS_WDR_TIMEOUT);
@@ -354,27 +347,21 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
 	if (!buf)
 		return -ENOMEM;
 
-	/* dbg("application number is %4x",
-	    (((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */
 	/* Wval  is same as application number */
 	if (port->serial->num_ports == 4) {
 		Wval =
 		    (((__u16) port->number - (__u16) (port->serial->minor)) +
 		     1) << 8;
-		dbg("mos7840_get_uart_reg application number is %x", Wval);
 	} else {
 		if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
 			Wval = (((__u16) port->number -
 			      (__u16) (port->serial->minor)) + 1) << 8;
-			dbg("mos7840_get_uart_reg application number is %x",
-			    Wval);
 		} else {
 			Wval = (((__u16) port->number -
 			      (__u16) (port->serial->minor)) + 2) << 8;
-			dbg("mos7840_get_uart_reg application number is %x",
-			    Wval);
 		}
 	}
+	dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval);
 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
 			      MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH,
 			      MOS_WDR_TIMEOUT);
@@ -384,14 +371,13 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
 	return ret;
 }
 
-static void mos7840_dump_serial_port(struct moschip_port *mos7840_port)
+static void mos7840_dump_serial_port(struct usb_serial_port *port,
+				     struct moschip_port *mos7840_port)
 {
 
-	dbg("***************************************");
-	dbg("SpRegOffset is %2x", mos7840_port->SpRegOffset);
-	dbg("ControlRegOffset is %2x", mos7840_port->ControlRegOffset);
-	dbg("DCRRegOffset is %2x", mos7840_port->DcrRegOffset);
-	dbg("***************************************");
+	dev_dbg(&port->dev, "SpRegOffset is %2x\n", mos7840_port->SpRegOffset);
+	dev_dbg(&port->dev, "ControlRegOffset is %2x\n", mos7840_port->ControlRegOffset);
+	dev_dbg(&port->dev, "DCRRegOffset is %2x\n", mos7840_port->DcrRegOffset);
 
 }
 
@@ -450,8 +436,6 @@ static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr)
 {
 	struct async_icount *icount;
 
-	dbg("%s - %02x", __func__, new_lsr);
-
 	if (new_lsr & SERIAL_LSR_BI) {
 		/*
 		 * Parity and Framing errors only count if they
@@ -492,6 +476,7 @@ static void mos7840_control_callback(struct urb *urb)
 {
 	unsigned char *data;
 	struct moschip_port *mos7840_port;
+	struct device *dev = &urb->dev->dev;
 	__u8 regval = 0x0;
 	int result = 0;
 	int status = urb->status;
@@ -506,21 +491,19 @@ static void mos7840_control_callback(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__,
-		    status);
+		dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __func__,
-		    status);
+		dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status);
 		goto exit;
 	}
 
-	dbg("%s urb buffer size is %d", __func__, urb->actual_length);
-	dbg("%s mos7840_port->MsrLsr is %d port %d", __func__,
-	    mos7840_port->MsrLsr, mos7840_port->port_num);
+	dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length);
+	dev_dbg(dev, "%s mos7840_port->MsrLsr is %d port %d\n", __func__,
+		mos7840_port->MsrLsr, mos7840_port->port_num);
 	data = urb->transfer_buffer;
 	regval = (__u8) data[0];
-	dbg("%s data is %x", __func__, regval);
+	dev_dbg(dev, "%s data is %x\n", __func__, regval);
 	if (mos7840_port->MsrLsr == 0)
 		mos7840_handle_new_msr(mos7840_port, regval);
 	else if (mos7840_port->MsrLsr == 1)
@@ -532,8 +515,7 @@ exit:
 		result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC);
 	spin_unlock(&mos7840_port->pool_lock);
 	if (result) {
-		dev_err(&urb->dev->dev,
-			"%s - Error %d submitting interrupt urb\n",
+		dev_err(dev, "%s - Error %d submitting interrupt urb\n",
 			__func__, result);
 	}
 }
@@ -570,12 +552,12 @@ static void mos7840_set_led_callback(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* This urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__,
-			urb->status);
+		dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d",
+			__func__, urb->status);
 		break;
 	default:
-		dbg("%s - nonzero urb status received: %d", __func__,
-			urb->status);
+		dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d",
+			__func__, urb->status);
 	}
 }
 
@@ -650,12 +632,12 @@ static void mos7840_interrupt_callback(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__,
-		    status);
+		dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __func__,
-		    status);
+		dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
 		goto exit;
 	}
 
@@ -672,7 +654,7 @@ static void mos7840_interrupt_callback(struct urb *urb)
 	 * Byte 5 FIFO status for both */
 
 	if (length && length > 5) {
-		dbg("%s", "Wrong data !!!");
+		dev_dbg(&urb->dev->dev, "%s", "Wrong data !!!\n");
 		return;
 	}
 
@@ -689,17 +671,17 @@ static void mos7840_interrupt_callback(struct urb *urb)
 		      (__u16) (serial->minor)) + 1) << 8;
 		if (mos7840_port->open) {
 			if (sp[i] & 0x01) {
-				dbg("SP%d No Interrupt !!!", i);
+				dev_dbg(&urb->dev->dev, "SP%d No Interrupt !!!\n", i);
 			} else {
 				switch (sp[i] & 0x0f) {
 				case SERIAL_IIR_RLS:
-					dbg("Serial Port %d: Receiver status error or ", i);
-					dbg("address bit detected in 9-bit mode");
+					dev_dbg(&urb->dev->dev, "Serial Port %d: Receiver status error or \n", i);
+					dev_dbg(&urb->dev->dev, "address bit detected in 9-bit mode\n");
 					mos7840_port->MsrLsr = 1;
 					wreg = LINE_STATUS_REGISTER;
 					break;
 				case SERIAL_IIR_MS:
-					dbg("Serial Port %d: Modem status change", i);
+					dev_dbg(&urb->dev->dev, "Serial Port %d: Modem status change\n", i);
 					mos7840_port->MsrLsr = 0;
 					wreg = MODEM_STATUS_REGISTER;
 					break;
@@ -731,11 +713,11 @@ static int mos7840_port_paranoia_check(struct usb_serial_port *port,
 				       const char *function)
 {
 	if (!port) {
-		dbg("%s - port == NULL", function);
+		pr_debug("%s - port == NULL\n", function);
 		return -1;
 	}
 	if (!port->serial) {
-		dbg("%s - port->serial == NULL", function);
+		pr_debug("%s - port->serial == NULL\n", function);
 		return -1;
 	}
 
@@ -747,11 +729,11 @@ static int mos7840_serial_paranoia_check(struct usb_serial *serial,
 					 const char *function)
 {
 	if (!serial) {
-		dbg("%s - serial == NULL", function);
+		pr_debug("%s - serial == NULL\n", function);
 		return -1;
 	}
 	if (!serial->type) {
-		dbg("%s - serial->type == NULL!", function);
+		pr_debug("%s - serial->type == NULL!\n", function);
 		return -1;
 	}
 
@@ -790,49 +772,44 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 	int status = urb->status;
 
 	mos7840_port = urb->context;
-	if (!mos7840_port) {
-		dbg("%s", "NULL mos7840_port pointer");
+	if (!mos7840_port)
 		return;
-	}
 
 	if (status) {
-		dbg("nonzero read bulk status received: %d", status);
+		dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status);
 		mos7840_port->read_urb_busy = false;
 		return;
 	}
 
-	port = (struct usb_serial_port *)mos7840_port->port;
+	port = mos7840_port->port;
 	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Port Paranoia failed");
 		mos7840_port->read_urb_busy = false;
 		return;
 	}
 
 	serial = mos7840_get_usb_serial(port, __func__);
 	if (!serial) {
-		dbg("%s", "Bad serial pointer");
 		mos7840_port->read_urb_busy = false;
 		return;
 	}
 
 	data = urb->transfer_buffer;
+	usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
 
 	if (urb->actual_length) {
 		tty = tty_port_tty_get(&mos7840_port->port->port);
 		if (tty) {
 			tty_insert_flip_string(tty, data, urb->actual_length);
-			dbg(" %s ", data);
 			tty_flip_buffer_push(tty);
 			tty_kref_put(tty);
 		}
 		mos7840_port->icount.rx += urb->actual_length;
 		smp_wmb();
-		dbg("mos7840_port->icount.rx is %d:",
-		    mos7840_port->icount.rx);
+		dev_dbg(&port->dev, "mos7840_port->icount.rx is %d:\n", mos7840_port->icount.rx);
 	}
 
 	if (!mos7840_port->read_urb) {
-		dbg("%s", "URB KILLED !!!");
+		dev_dbg(&port->dev, "%s", "URB KILLED !!!\n");
 		mos7840_port->read_urb_busy = false;
 		return;
 	}
@@ -850,7 +827,7 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 	retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
 
 	if (retval) {
-		dbg("usb_submit_urb(read bulk) failed, retval = %d", retval);
+		dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval);
 		mos7840_port->read_urb_busy = false;
 	}
 }
@@ -864,11 +841,13 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 static void mos7840_bulk_out_data_callback(struct urb *urb)
 {
 	struct moschip_port *mos7840_port;
+	struct usb_serial_port *port;
 	struct tty_struct *tty;
 	int status = urb->status;
 	int i;
 
 	mos7840_port = urb->context;
+	port = mos7840_port->port;
 	spin_lock(&mos7840_port->pool_lock);
 	for (i = 0; i < NUM_URBS; i++) {
 		if (urb == mos7840_port->write_urb_pool[i]) {
@@ -879,16 +858,14 @@ static void mos7840_bulk_out_data_callback(struct urb *urb)
 	spin_unlock(&mos7840_port->pool_lock);
 
 	if (status) {
-		dbg("nonzero write bulk status received:%d", status);
+		dev_dbg(&port->dev, "nonzero write bulk status received:%d\n", status);
 		return;
 	}
 
-	if (mos7840_port_paranoia_check(mos7840_port->port, __func__)) {
-		dbg("%s", "Port Paranoia failed");
+	if (mos7840_port_paranoia_check(port, __func__))
 		return;
-	}
 
-	tty = tty_port_tty_get(&mos7840_port->port->port);
+	tty = tty_port_tty_get(&port->port);
 	if (tty && mos7840_port->open)
 		tty_wakeup(tty);
 	tty_kref_put(tty);
@@ -929,17 +906,13 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct moschip_port *mos7840_port;
 	struct moschip_port *port0;
 
-	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Port Paranoia failed");
+	if (mos7840_port_paranoia_check(port, __func__))
 		return -ENODEV;
-	}
 
 	serial = port->serial;
 
-	if (mos7840_serial_paranoia_check(serial, __func__)) {
-		dbg("%s", "Serial Paranoia failed");
+	if (mos7840_serial_paranoia_check(serial, __func__))
 		return -ENODEV;
-	}
 
 	mos7840_port = mos7840_get_port_private(port);
 	port0 = mos7840_get_port_private(serial->port[0]);
@@ -990,20 +963,20 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	Data = 0x0;
 	status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
 	if (status < 0) {
-		dbg("Reading Spreg failed");
+		dev_dbg(&port->dev, "Reading Spreg failed\n");
 		return -1;
 	}
 	Data |= 0x80;
 	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
 	if (status < 0) {
-		dbg("writing Spreg failed");
+		dev_dbg(&port->dev, "writing Spreg failed\n");
 		return -1;
 	}
 
 	Data &= ~0x80;
 	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
 	if (status < 0) {
-		dbg("writing Spreg failed");
+		dev_dbg(&port->dev, "writing Spreg failed\n");
 		return -1;
 	}
 	/* End of block to be checked */
@@ -1012,7 +985,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
 									&Data);
 	if (status < 0) {
-		dbg("Reading Controlreg failed");
+		dev_dbg(&port->dev, "Reading Controlreg failed\n");
 		return -1;
 	}
 	Data |= 0x08;		/* Driver done bit */
@@ -1020,7 +993,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	status = mos7840_set_reg_sync(port,
 				mos7840_port->ControlRegOffset, Data);
 	if (status < 0) {
-		dbg("writing Controlreg failed");
+		dev_dbg(&port->dev, "writing Controlreg failed\n");
 		return -1;
 	}
 	/* do register settings here */
@@ -1031,21 +1004,21 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	Data = 0x00;
 	status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
 	if (status < 0) {
-		dbg("disabling interrupts failed");
+		dev_dbg(&port->dev, "disabling interrupts failed\n");
 		return -1;
 	}
 	/* Set FIFO_CONTROL_REGISTER to the default value */
 	Data = 0x00;
 	status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
 	if (status < 0) {
-		dbg("Writing FIFO_CONTROL_REGISTER  failed");
+		dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");
 		return -1;
 	}
 
 	Data = 0xcf;
 	status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
 	if (status < 0) {
-		dbg("Writing FIFO_CONTROL_REGISTER  failed");
+		dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");
 		return -1;
 	}
 
@@ -1142,12 +1115,12 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	 * (can't set it up in mos7840_startup as the  *
 	 * structures were not set up at that time.)   */
 
-	dbg("port number is %d", port->number);
-	dbg("serial number is %d", port->serial->minor);
-	dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress);
-	dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress);
-	dbg("Interrupt endpoint is %d", port->interrupt_in_endpointAddress);
-	dbg("port's number in the device is %d", mos7840_port->port_num);
+	dev_dbg(&port->dev, "port number is %d\n", port->number);
+	dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor);
+	dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
+	dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress);
+	dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress);
+	dev_dbg(&port->dev, "port's number in the device is %d\n", mos7840_port->port_num);
 	mos7840_port->read_urb = port->read_urb;
 
 	/* set up our bulk in urb */
@@ -1171,8 +1144,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 			mos7840_bulk_in_callback, mos7840_port);
 	}
 
-	dbg("mos7840_open: bulkin endpoint is %d",
-	    port->bulk_in_endpointAddress);
+	dev_dbg(&port->dev, "%s: bulkin endpoint is %d\n", __func__, port->bulk_in_endpointAddress);
 	mos7840_port->read_urb_busy = true;
 	response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
 	if (response) {
@@ -1197,9 +1169,6 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	mos7840_port->icount.tx = 0;
 	mos7840_port->icount.rx = 0;
 
-	dbg("usb_serial serial:%p       mos7840_port:%p\n      usb_serial_port port:%p",
-				serial, mos7840_port, port);
-
 	return 0;
 }
 
@@ -1221,10 +1190,8 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty)
 	unsigned long flags;
 	struct moschip_port *mos7840_port;
 
-	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port");
+	if (mos7840_port_paranoia_check(port, __func__))
 		return 0;
-	}
 
 	mos7840_port = mos7840_get_port_private(port);
 	if (mos7840_port == NULL)
@@ -1238,7 +1205,7 @@ static int mos7840_chars_in_buffer(struct tty_struct *tty)
 		}
 	}
 	spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
-	dbg("%s - returns %d", __func__, chars);
+	dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
 	return chars;
 
 }
@@ -1256,16 +1223,12 @@ static void mos7840_close(struct usb_serial_port *port)
 	int j;
 	__u16 Data;
 
-	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Port Paranoia failed");
+	if (mos7840_port_paranoia_check(port, __func__))
 		return;
-	}
 
 	serial = mos7840_get_usb_serial(port, __func__);
-	if (!serial) {
-		dbg("%s", "Serial Paranoia failed");
+	if (!serial)
 		return;
-	}
 
 	mos7840_port = mos7840_get_port_private(port);
 	port0 = mos7840_get_port_private(serial->port[0]);
@@ -1291,27 +1254,26 @@ static void mos7840_close(struct usb_serial_port *port)
 	 * and interrupt read if they exists                  */
 	if (serial->dev) {
 		if (mos7840_port->write_urb) {
-			dbg("%s", "Shutdown bulk write");
+			dev_dbg(&port->dev, "%s", "Shutdown bulk write\n");
 			usb_kill_urb(mos7840_port->write_urb);
 		}
 		if (mos7840_port->read_urb) {
-			dbg("%s", "Shutdown bulk read");
+			dev_dbg(&port->dev, "%s", "Shutdown bulk read\n");
 			usb_kill_urb(mos7840_port->read_urb);
 			mos7840_port->read_urb_busy = false;
 		}
 		if ((&mos7840_port->control_urb)) {
-			dbg("%s", "Shutdown control read");
+			dev_dbg(&port->dev, "%s", "Shutdown control read\n");
 			/*/      usb_kill_urb (mos7840_port->control_urb); */
 		}
 	}
 /*      if(mos7840_port->ctrl_buf != NULL) */
 /*              kfree(mos7840_port->ctrl_buf); */
 	port0->open_ports--;
-	dbg("mos7840_num_open_ports in close%d:in port%d",
-	    port0->open_ports, port->number);
+	dev_dbg(&port->dev, "%s in close%d:in port%d\n", __func__, port0->open_ports, port->number);
 	if (port0->open_ports == 0) {
 		if (serial->port[0]->interrupt_in_urb) {
-			dbg("%s", "Shutdown interrupt_in_urb");
+			dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n");
 			usb_kill_urb(serial->port[0]->interrupt_in_urb);
 		}
 	}
@@ -1363,7 +1325,7 @@ static void mos7840_block_until_chase_response(struct tty_struct *tty,
 		/* No activity.. count down section */
 		wait--;
 		if (wait == 0) {
-			dbg("%s - TIMEOUT", __func__);
+			dev_dbg(&mos7840_port->port->dev, "%s - TIMEOUT\n", __func__);
 			return;
 		} else {
 			/* Reset timeout value back to seconds */
@@ -1384,16 +1346,12 @@ static void mos7840_break(struct tty_struct *tty, int break_state)
 	struct usb_serial *serial;
 	struct moschip_port *mos7840_port;
 
-	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Port Paranoia failed");
+	if (mos7840_port_paranoia_check(port, __func__))
 		return;
-	}
 
 	serial = mos7840_get_usb_serial(port, __func__);
-	if (!serial) {
-		dbg("%s", "Serial Paranoia failed");
+	if (!serial)
 		return;
-	}
 
 	mos7840_port = mos7840_get_port_private(port);
 
@@ -1411,8 +1369,7 @@ static void mos7840_break(struct tty_struct *tty, int break_state)
 
 	/* FIXME: no locking on shadowLCR anywhere in driver */
 	mos7840_port->shadowLCR = data;
-	dbg("mcs7840_break mos7840_port->shadowLCR is %x",
-	    mos7840_port->shadowLCR);
+	dev_dbg(&port->dev, "%s mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR);
 	mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER,
 			     mos7840_port->shadowLCR);
 }
@@ -1433,17 +1390,12 @@ static int mos7840_write_room(struct tty_struct *tty)
 	unsigned long flags;
 	struct moschip_port *mos7840_port;
 
-	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port");
-		dbg("%s", " mos7840_write_room:leaving ...........");
+	if (mos7840_port_paranoia_check(port, __func__))
 		return -1;
-	}
 
 	mos7840_port = mos7840_get_port_private(port);
-	if (mos7840_port == NULL) {
-		dbg("%s", "mos7840_break:leaving ...........");
+	if (mos7840_port == NULL)
 		return -1;
-	}
 
 	spin_lock_irqsave(&mos7840_port->pool_lock, flags);
 	for (i = 0; i < NUM_URBS; ++i) {
@@ -1453,7 +1405,7 @@ static int mos7840_write_room(struct tty_struct *tty)
 	spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
 
 	room = (room == 0) ? 0 : room - URB_TRANSFER_BUFFER_SIZE + 1;
-	dbg("%s - returns %d", __func__, room);
+	dev_dbg(&mos7840_port->port->dev, "%s - returns %d\n", __func__, room);
 	return room;
 
 }
@@ -1486,9 +1438,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	Data = 0x00;
 	status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
 	mos7840_port->shadowLCR = Data;
-	dbg("mos7840_write: LINE_CONTROL_REGISTER is %x", Data);
-	dbg("mos7840_write: mos7840_port->shadowLCR is %x",
-	    mos7840_port->shadowLCR);
+	dev_dbg(&port->dev, "%s: LINE_CONTROL_REGISTER is %x\n", __func__, Data);
+	dev_dbg(&port->dev, "%s: mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR);
 
 	/* Data = 0x03; */
 	/* status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); */
@@ -1501,34 +1452,27 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	/* status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); */
 	Data = 0x00;
 	status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data);
-	dbg("mos7840_write:DLL value is %x", Data);
+	dev_dbg(&port->dev, "%s: DLL value is %x\n", __func__, Data);
 
 	Data = 0x0;
 	status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data);
-	dbg("mos7840_write:DLM value is %x", Data);
+	dev_dbg(&port->dev, "%s: DLM value is %x\n", __func__, Data);
 
 	Data = Data & ~SERIAL_LCR_DLAB;
-	dbg("mos7840_write: mos7840_port->shadowLCR is %x",
-	    mos7840_port->shadowLCR);
+	dev_dbg(&port->dev, "%s: mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR);
 	status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
 #endif
 
-	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Port Paranoia failed");
+	if (mos7840_port_paranoia_check(port, __func__))
 		return -1;
-	}
 
 	serial = port->serial;
-	if (mos7840_serial_paranoia_check(serial, __func__)) {
-		dbg("%s", "Serial Paranoia failed");
+	if (mos7840_serial_paranoia_check(serial, __func__))
 		return -1;
-	}
 
 	mos7840_port = mos7840_get_port_private(port);
-	if (mos7840_port == NULL) {
-		dbg("%s", "mos7840_port is NULL");
+	if (mos7840_port == NULL)
 		return -1;
-	}
 
 	/* try to find a free urb in the list */
 	urb = NULL;
@@ -1538,14 +1482,14 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 		if (!mos7840_port->busy[i]) {
 			mos7840_port->busy[i] = 1;
 			urb = mos7840_port->write_urb_pool[i];
-			dbg("URB:%d", i);
+			dev_dbg(&port->dev, "URB:%d\n", i);
 			break;
 		}
 	}
 	spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
 
 	if (urb == NULL) {
-		dbg("%s - no more free urbs", __func__);
+		dev_dbg(&port->dev, "%s - no more free urbs\n", __func__);
 		goto exit;
 	}
 
@@ -1585,7 +1529,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	}
 
 	data1 = urb->transfer_buffer;
-	dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
+	dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress);
 
 	/* Turn on LED */
 	if (mos7840_port->has_led && !mos7840_port->led_flag) {
@@ -1608,7 +1552,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	bytes_sent = transfer_size;
 	mos7840_port->icount.tx += transfer_size;
 	smp_wmb();
-	dbg("mos7840_port->icount.tx is %d:", mos7840_port->icount.tx);
+	dev_dbg(&port->dev, "mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx);
 exit:
 	return bytes_sent;
 
@@ -1626,12 +1570,8 @@ static void mos7840_throttle(struct tty_struct *tty)
 	struct moschip_port *mos7840_port;
 	int status;
 
-	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port");
+	if (mos7840_port_paranoia_check(port, __func__))
 		return;
-	}
-
-	dbg("- port %d", port->number);
 
 	mos7840_port = mos7840_get_port_private(port);
 
@@ -1639,7 +1579,7 @@ static void mos7840_throttle(struct tty_struct *tty)
 		return;
 
 	if (!mos7840_port->open) {
-		dbg("%s", "port not opened");
+		dev_dbg(&port->dev, "%s", "port not opened\n");
 		return;
 	}
 
@@ -1672,16 +1612,14 @@ static void mos7840_unthrottle(struct tty_struct *tty)
 	int status;
 	struct moschip_port *mos7840_port = mos7840_get_port_private(port);
 
-	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port");
+	if (mos7840_port_paranoia_check(port, __func__))
 		return;
-	}
 
 	if (mos7840_port == NULL)
 		return;
 
 	if (!mos7840_port->open) {
-		dbg("%s - port not opened", __func__);
+		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
 		return;
 	}
 
@@ -1726,7 +1664,7 @@ static int mos7840_tiocmget(struct tty_struct *tty)
 	    | ((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0)
 	    | ((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0);
 
-	dbg("%s - 0x%04X", __func__, result);
+	dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);
 
 	return result;
 }
@@ -1764,7 +1702,7 @@ static int mos7840_tiocmset(struct tty_struct *tty,
 
 	status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
 	if (status < 0) {
-		dbg("setting MODEM_CONTROL_REGISTER Failed");
+		dev_dbg(&port->dev, "setting MODEM_CONTROL_REGISTER Failed\n");
 		return status;
 	}
 
@@ -1776,10 +1714,11 @@ static int mos7840_tiocmset(struct tty_struct *tty,
  *	this function calculates the proper baud rate divisor for the specified
  *	baud rate.
  *****************************************************************************/
-static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor,
+static int mos7840_calc_baud_rate_divisor(struct usb_serial_port *port,
+					  int baudRate, int *divisor,
 					  __u16 *clk_sel_val)
 {
-	dbg("%s - %d", __func__, baudRate);
+	dev_dbg(&port->dev, "%s - %d\n", __func__, baudRate);
 
 	if (baudRate <= 115200) {
 		*divisor = 115200 / baudRate;
@@ -1832,11 +1771,11 @@ static int mos7840_calc_baud_rate_divisor(int baudRate, int *divisor,
 			custom++;
 		*divisor = custom;
 
-		dbg(" Baud %d = %d", baudrate, custom);
+		dev_dbg(&port->dev, " Baud %d = %d\n", baudrate, custom);
 		return 0;
 	}
 
-	dbg("%s", " Baud calculation Failed...");
+	dev_dbg(&port->dev, "%s", " Baud calculation Failed...\n");
 	return -1;
 #endif
 }
@@ -1860,21 +1799,17 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 	if (mos7840_port == NULL)
 		return -1;
 
-	port = (struct usb_serial_port *)mos7840_port->port;
-	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port");
+	port = mos7840_port->port;
+	if (mos7840_port_paranoia_check(port, __func__))
 		return -1;
-	}
 
-	if (mos7840_serial_paranoia_check(port->serial, __func__)) {
-		dbg("%s", "Invalid Serial");
+	if (mos7840_serial_paranoia_check(port->serial, __func__))
 		return -1;
-	}
 
 	number = mos7840_port->port->number - mos7840_port->port->serial->minor;
 
-	dbg("%s - port = %d, baud = %d", __func__,
-	    mos7840_port->port->number, baudRate);
+	dev_dbg(&port->dev, "%s - port = %d, baud = %d\n", __func__,
+		mos7840_port->port->number, baudRate);
 	/* reset clk_uart_sel in spregOffset */
 	if (baudRate > 115200) {
 #ifdef HW_flow_control
@@ -1885,7 +1820,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
 									Data);
 		if (status < 0) {
-			dbg("Writing spreg failed in set_serial_baud");
+			dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");
 			return -1;
 		}
 #endif
@@ -1898,7 +1833,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
 									Data);
 		if (status < 0) {
-			dbg("Writing spreg failed in set_serial_baud");
+			dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");
 			return -1;
 		}
 #endif
@@ -1908,19 +1843,19 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 	if (1) {		/* baudRate <= 115200) */
 		clk_sel_val = 0x0;
 		Data = 0x0;
-		status = mos7840_calc_baud_rate_divisor(baudRate, &divisor,
+		status = mos7840_calc_baud_rate_divisor(port, baudRate, &divisor,
 						   &clk_sel_val);
 		status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset,
 								 &Data);
 		if (status < 0) {
-			dbg("reading spreg failed in set_serial_baud");
+			dev_dbg(&port->dev, "reading spreg failed in set_serial_baud\n");
 			return -1;
 		}
 		Data = (Data & 0x8f) | clk_sel_val;
 		status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset,
 								Data);
 		if (status < 0) {
-			dbg("Writing spreg failed in set_serial_baud");
+			dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");
 			return -1;
 		}
 		/* Calculate the Divisor */
@@ -1936,11 +1871,11 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 
 		/* Write the divisor */
 		Data = (unsigned char)(divisor & 0xff);
-		dbg("set_serial_baud Value to write DLL is %x", Data);
+		dev_dbg(&port->dev, "set_serial_baud Value to write DLL is %x\n", Data);
 		mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
 
 		Data = (unsigned char)((divisor & 0xff00) >> 8);
-		dbg("set_serial_baud Value to write DLM is %x", Data);
+		dev_dbg(&port->dev, "set_serial_baud Value to write DLM is %x\n", Data);
 		mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
 
 		/* Disable access to divisor latch */
@@ -1975,24 +1910,18 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 	if (mos7840_port == NULL)
 		return;
 
-	port = (struct usb_serial_port *)mos7840_port->port;
+	port = mos7840_port->port;
 
-	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port");
+	if (mos7840_port_paranoia_check(port, __func__))
 		return;
-	}
 
-	if (mos7840_serial_paranoia_check(port->serial, __func__)) {
-		dbg("%s", "Invalid Serial");
+	if (mos7840_serial_paranoia_check(port->serial, __func__))
 		return;
-	}
 
 	serial = port->serial;
 
-	dbg("%s - port %d", __func__, mos7840_port->port->number);
-
 	if (!mos7840_port->open) {
-		dbg("%s - port not opened", __func__);
+		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
 		return;
 	}
 
@@ -2027,14 +1956,14 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 	if (cflag & PARENB) {
 		if (cflag & PARODD) {
 			lParity = LCR_PAR_ODD;
-			dbg("%s - parity = odd", __func__);
+			dev_dbg(&port->dev, "%s - parity = odd\n", __func__);
 		} else {
 			lParity = LCR_PAR_EVEN;
-			dbg("%s - parity = even", __func__);
+			dev_dbg(&port->dev, "%s - parity = even\n", __func__);
 		}
 
 	} else {
-		dbg("%s - parity = none", __func__);
+		dev_dbg(&port->dev, "%s - parity = none\n", __func__);
 	}
 
 	if (cflag & CMSPAR)
@@ -2043,10 +1972,10 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 	/* Change the Stop bit */
 	if (cflag & CSTOPB) {
 		lStop = LCR_STOP_2;
-		dbg("%s - stop bits = 2", __func__);
+		dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__);
 	} else {
 		lStop = LCR_STOP_1;
-		dbg("%s - stop bits = 1", __func__);
+		dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__);
 	}
 
 	/* Update the LCR with the correct value */
@@ -2054,8 +1983,8 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 	    ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
 	mos7840_port->shadowLCR |= (lData | lParity | lStop);
 
-	dbg("mos7840_change_port_settings mos7840_port->shadowLCR is %x",
-	    mos7840_port->shadowLCR);
+	dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is %x\n", __func__,
+		mos7840_port->shadowLCR);
 	/* Disable Interrupts */
 	Data = 0x00;
 	mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
@@ -2096,11 +2025,11 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 
 	if (!baud) {
 		/* pick a default, any default... */
-		dbg("%s", "Picked default baud...");
+		dev_dbg(&port->dev, "%s", "Picked default baud...\n");
 		baud = 9600;
 	}
 
-	dbg("%s - baud rate = %d", __func__, baud);
+	dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud);
 	status = mos7840_send_cmd_write_baud_rate(mos7840_port, baud);
 
 	/* Enable Interrupts */
@@ -2111,15 +2040,15 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 		mos7840_port->read_urb_busy = true;
 		status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
 		if (status) {
-			dbg("usb_submit_urb(read bulk) failed, status = %d",
+			dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n",
 			    status);
 			mos7840_port->read_urb_busy = false;
 		}
 	}
 	wake_up(&mos7840_port->delta_msr_wait);
 	mos7840_port->delta_msr_cond = 1;
-	dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x",
-	    mos7840_port->shadowLCR);
+	dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is End %x\n", __func__,
+		mos7840_port->shadowLCR);
 }
 
 /*****************************************************************************
@@ -2137,17 +2066,13 @@ static void mos7840_set_termios(struct tty_struct *tty,
 	struct usb_serial *serial;
 	struct moschip_port *mos7840_port;
 
-	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port");
+	if (mos7840_port_paranoia_check(port, __func__))
 		return;
-	}
 
 	serial = port->serial;
 
-	if (mos7840_serial_paranoia_check(serial, __func__)) {
-		dbg("%s", "Invalid Serial");
+	if (mos7840_serial_paranoia_check(serial, __func__))
 		return;
-	}
 
 	mos7840_port = mos7840_get_port_private(port);
 
@@ -2155,26 +2080,26 @@ static void mos7840_set_termios(struct tty_struct *tty,
 		return;
 
 	if (!mos7840_port->open) {
-		dbg("%s - port not opened", __func__);
+		dev_dbg(&port->dev, "%s - port not opened\n", __func__);
 		return;
 	}
 
-	dbg("%s", "setting termios - ");
+	dev_dbg(&port->dev, "%s", "setting termios - \n");
 
 	cflag = tty->termios.c_cflag;
 
-	dbg("%s - clfag %08x iflag %08x", __func__,
-	    tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag));
-	dbg("%s - old clfag %08x old iflag %08x", __func__,
-	    old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
-	dbg("%s - port %d", __func__, port->number);
+	dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__,
+		tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag));
+	dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__,
+		old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
+	dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
 
 	/* change the port settings to the new ones specified */
 
 	mos7840_change_port_settings(tty, mos7840_port, old_termios);
 
 	if (!mos7840_port->read_urb) {
-		dbg("%s", "URB KILLED !!!!!");
+		dev_dbg(&port->dev, "%s", "URB KILLED !!!!!\n");
 		return;
 	}
 
@@ -2182,7 +2107,7 @@ static void mos7840_set_termios(struct tty_struct *tty,
 		mos7840_port->read_urb_busy = true;
 		status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
 		if (status) {
-			dbg("usb_submit_urb(read bulk) failed, status = %d",
+			dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n",
 			    status);
 			mos7840_port->read_urb_busy = false;
 		}
@@ -2207,10 +2132,8 @@ static int mos7840_get_lsr_info(struct tty_struct *tty,
 	unsigned int result = 0;
 
 	count = mos7840_chars_in_buffer(tty);
-	if (count == 0) {
-		dbg("%s -- Empty", __func__);
+	if (count == 0)
 		result = TIOCSER_TEMT;
-	}
 
 	if (copy_to_user(value, &result, sizeof(int)))
 		return -EFAULT;
@@ -2273,8 +2196,8 @@ static int mos7840_get_icount(struct tty_struct *tty,
 	icount->brk = cnow.brk;
 	icount->buf_overrun = cnow.buf_overrun;
 
-	dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
-		port->number, icount->rx, icount->tx);
+	dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", __func__,
+		icount->rx, icount->tx);
 	return 0;
 }
 
@@ -2293,35 +2216,33 @@ static int mos7840_ioctl(struct tty_struct *tty,
 	struct async_icount cnow;
 	struct async_icount cprev;
 
-	if (mos7840_port_paranoia_check(port, __func__)) {
-		dbg("%s", "Invalid port");
+	if (mos7840_port_paranoia_check(port, __func__))
 		return -1;
-	}
 
 	mos7840_port = mos7840_get_port_private(port);
 
 	if (mos7840_port == NULL)
 		return -1;
 
-	dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
+	dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd);
 
 	switch (cmd) {
 		/* return number of bytes available */
 
 	case TIOCSERGETLSR:
-		dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
+		dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__);
 		return mos7840_get_lsr_info(tty, argp);
 
 	case TIOCGSERIAL:
-		dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
+		dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__);
 		return mos7840_get_serial_info(mos7840_port, argp);
 
 	case TIOCSSERIAL:
-		dbg("%s (%d) TIOCSSERIAL", __func__, port->number);
+		dev_dbg(&port->dev, "%s TIOCSSERIAL\n", __func__);
 		break;
 
 	case TIOCMIWAIT:
-		dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
+		dev_dbg(&port->dev, "%s  TIOCMIWAIT\n", __func__);
 		cprev = mos7840_port->icount;
 		while (1) {
 			/* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */
@@ -2437,11 +2358,6 @@ static int mos7840_startup(struct usb_serial *serial)
 	int i, status;
 	__u16 Data;
 
-	if (!serial) {
-		dbg("%s", "Invalid Handler");
-		return -1;
-	}
-
 	dev = serial->dev;
 
 	/* we set up the pointers to the endpoints in the mos7840_open *
@@ -2449,7 +2365,7 @@ static int mos7840_startup(struct usb_serial *serial)
 
 	/* set up port private structures */
 	for (i = 0; i < serial->num_ports; ++i) {
-		dbg ("mos7840_startup: configuring port %d............", i);
+		dev_dbg(&dev->dev, "mos7840_startup: configuring port %d............\n", i);
 		mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
 		if (mos7840_port == NULL) {
 			dev_err(&dev->dev, "%s - Out of memory\n", __func__);
@@ -2470,10 +2386,10 @@ static int mos7840_startup(struct usb_serial *serial)
 		 * usb-serial.c:get_free_serial() and cannot therefore be used
 		 * to index device instances */
 		mos7840_port->port_num = i + 1;
-		dbg ("serial->port[i]->number = %d", serial->port[i]->number);
-		dbg ("serial->port[i]->serial->minor = %d", serial->port[i]->serial->minor);
-		dbg ("mos7840_port->port_num = %d", mos7840_port->port_num);
-		dbg ("serial->minor = %d", serial->minor);
+		dev_dbg(&dev->dev, "serial->port[i]->number = %d\n", serial->port[i]->number);
+		dev_dbg(&dev->dev, "serial->port[i]->serial->minor = %d\n", serial->port[i]->serial->minor);
+		dev_dbg(&dev->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);
+		dev_dbg(&dev->dev, "serial->minor = %d\n", serial->minor);
 
 		if (mos7840_port->port_num == 1) {
 			mos7840_port->SpRegOffset = 0x0;
@@ -2500,18 +2416,17 @@ static int mos7840_startup(struct usb_serial *serial)
 			mos7840_port->ControlRegOffset = 0xd;
 			mos7840_port->DcrRegOffset = 0x1c;
 		}
-		mos7840_dump_serial_port(mos7840_port);
+		mos7840_dump_serial_port(serial->port[i], mos7840_port);
 		mos7840_set_port_private(serial->port[i], mos7840_port);
 
 		/* enable rx_disable bit in control register */
 		status = mos7840_get_reg_sync(serial->port[i],
 				 mos7840_port->ControlRegOffset, &Data);
 		if (status < 0) {
-			dbg("Reading ControlReg failed status-0x%x", status);
+			dev_dbg(&dev->dev, "Reading ControlReg failed status-0x%x\n", status);
 			break;
 		} else
-			dbg("ControlReg Reading success val is %x, status%d",
-			    Data, status);
+			dev_dbg(&dev->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
 		Data |= 0x08;	/* setting driver done bit */
 		Data |= 0x04;	/* sp1_bit to have cts change reflect in
 				   modem status reg */
@@ -2520,11 +2435,10 @@ static int mos7840_startup(struct usb_serial *serial)
 		status = mos7840_set_reg_sync(serial->port[i],
 					 mos7840_port->ControlRegOffset, Data);
 		if (status < 0) {
-			dbg("Writing ControlReg failed(rx_disable) status-0x%x", status);
+			dev_dbg(&dev->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
 			break;
 		} else
-			dbg("ControlReg Writing success(rx_disable) status%d",
-			    status);
+			dev_dbg(&dev->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
 
 		/* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
 		   and 0x24 in DCR3 */
@@ -2532,61 +2446,57 @@ static int mos7840_startup(struct usb_serial *serial)
 		status = mos7840_set_reg_sync(serial->port[i],
 			 (__u16) (mos7840_port->DcrRegOffset + 0), Data);
 		if (status < 0) {
-			dbg("Writing DCR0 failed status-0x%x", status);
+			dev_dbg(&dev->dev, "Writing DCR0 failed status-0x%x\n", status);
 			break;
 		} else
-			dbg("DCR0 Writing success status%d", status);
+			dev_dbg(&dev->dev, "DCR0 Writing success status%d\n", status);
 
 		Data = 0x05;
 		status = mos7840_set_reg_sync(serial->port[i],
 			 (__u16) (mos7840_port->DcrRegOffset + 1), Data);
 		if (status < 0) {
-			dbg("Writing DCR1 failed status-0x%x", status);
+			dev_dbg(&dev->dev, "Writing DCR1 failed status-0x%x\n", status);
 			break;
 		} else
-			dbg("DCR1 Writing success status%d", status);
+			dev_dbg(&dev->dev, "DCR1 Writing success status%d\n", status);
 
 		Data = 0x24;
 		status = mos7840_set_reg_sync(serial->port[i],
 			 (__u16) (mos7840_port->DcrRegOffset + 2), Data);
 		if (status < 0) {
-			dbg("Writing DCR2 failed status-0x%x", status);
+			dev_dbg(&dev->dev, "Writing DCR2 failed status-0x%x\n", status);
 			break;
 		} else
-			dbg("DCR2 Writing success status%d", status);
+			dev_dbg(&dev->dev, "DCR2 Writing success status%d\n", status);
 
 		/* write values in clkstart0x0 and clkmulti 0x20 */
 		Data = 0x0;
 		status = mos7840_set_reg_sync(serial->port[i],
 					 CLK_START_VALUE_REGISTER, Data);
 		if (status < 0) {
-			dbg("Writing CLK_START_VALUE_REGISTER failed status-0x%x", status);
+			dev_dbg(&dev->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
 			break;
 		} else
-			dbg("CLK_START_VALUE_REGISTER Writing success status%d", status);
+			dev_dbg(&dev->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
 
 		Data = 0x20;
 		status = mos7840_set_reg_sync(serial->port[i],
 					CLK_MULTI_REGISTER, Data);
 		if (status < 0) {
-			dbg("Writing CLK_MULTI_REGISTER failed status-0x%x",
-			    status);
+			dev_dbg(&dev->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);
 			goto error;
 		} else
-			dbg("CLK_MULTI_REGISTER Writing success status%d",
-			    status);
+			dev_dbg(&dev->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status);
 
 		/* write value 0x0 to scratchpad register */
 		Data = 0x00;
 		status = mos7840_set_uart_reg(serial->port[i],
 						SCRATCH_PAD_REGISTER, Data);
 		if (status < 0) {
-			dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x",
-			    status);
+			dev_dbg(&dev->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
 			break;
 		} else
-			dbg("SCRATCH_PAD_REGISTER Writing success status%d",
-			    status);
+			dev_dbg(&dev->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
 
 		/* Zero Length flag register */
 		if ((mos7840_port->port_num != 1)
@@ -2596,31 +2506,25 @@ static int mos7840_startup(struct usb_serial *serial)
 			status = mos7840_set_reg_sync(serial->port[i],
 				      (__u16) (ZLP_REG1 +
 				      ((__u16)mos7840_port->port_num)), Data);
-			dbg("ZLIP offset %x",
-			    (__u16) (ZLP_REG1 +
-					((__u16) mos7840_port->port_num)));
+			dev_dbg(&dev->dev, "ZLIP offset %x\n",
+				(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num)));
 			if (status < 0) {
-				dbg("Writing ZLP_REG%d failed status-0x%x",
-				    i + 2, status);
+				dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 2, status);
 				break;
 			} else
-				dbg("ZLP_REG%d Writing success status%d",
-				    i + 2, status);
+				dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 2, status);
 		} else {
 			Data = 0xff;
 			status = mos7840_set_reg_sync(serial->port[i],
 			      (__u16) (ZLP_REG1 +
 			      ((__u16)mos7840_port->port_num) - 0x1), Data);
-			dbg("ZLIP offset %x",
-			    (__u16) (ZLP_REG1 +
-				     ((__u16) mos7840_port->port_num) - 0x1));
+			dev_dbg(&dev->dev, "ZLIP offset %x\n",
+				(__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1));
 			if (status < 0) {
-				dbg("Writing ZLP_REG%d failed status-0x%x",
-				    i + 1, status);
+				dev_dbg(&dev->dev, "Writing ZLP_REG%d failed status-0x%x\n", i + 1, status);
 				break;
 			} else
-				dbg("ZLP_REG%d Writing success status%d",
-				    i + 1, status);
+				dev_dbg(&dev->dev, "ZLP_REG%d Writing success status%d\n", i + 1, status);
 
 		}
 		mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
@@ -2661,16 +2565,15 @@ static int mos7840_startup(struct usb_serial *serial)
 						MODEM_CONTROL_REGISTER, 0x0300);
 		}
 	}
-	dbg ("mos7840_startup: all ports configured...........");
 
 	/* Zero Length flag enable */
 	Data = 0x0f;
 	status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
 	if (status < 0) {
-		dbg("Writing ZLP_REG5 failed status-0x%x", status);
+		dev_dbg(&dev->dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
 		goto error;
 	} else
-		dbg("ZLP_REG5 Writing success status%d", status);
+		dev_dbg(&dev->dev, "ZLP_REG5 Writing success status%d\n", status);
 
 	/* setting configuration feature to one */
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
@@ -2700,11 +2603,6 @@ static void mos7840_disconnect(struct usb_serial *serial)
 	unsigned long flags;
 	struct moschip_port *mos7840_port;
 
-	if (!serial) {
-		dbg("%s", "Invalid Handler");
-		return;
-	}
-
 	/* check for the ports to be closed,close the ports and disconnect */
 
 	/* free private structure allocated for serial port  *
@@ -2712,7 +2610,6 @@ static void mos7840_disconnect(struct usb_serial *serial)
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		mos7840_port = mos7840_get_port_private(serial->port[i]);
-		dbg ("mos7840_port %d = %p", i, mos7840_port);
 		if (mos7840_port) {
 			spin_lock_irqsave(&mos7840_port->pool_lock, flags);
 			mos7840_port->zombie = 1;
@@ -2732,11 +2629,6 @@ static void mos7840_release(struct usb_serial *serial)
 	int i;
 	struct moschip_port *mos7840_port;
 
-	if (!serial) {
-		dbg("%s", "Invalid Handler");
-		return;
-	}
-
 	/* check for the ports to be closed,close the ports and disconnect */
 
 	/* free private structure allocated for serial port  *
@@ -2744,7 +2636,6 @@ static void mos7840_release(struct usb_serial *serial)
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		mos7840_port = mos7840_get_port_private(serial->port[i]);
-		dbg("mos7840_port %d = %p", i, mos7840_port);
 		if (mos7840_port) {
 			if (mos7840_port->has_led) {
 				/* Turn off LED */
@@ -2801,6 +2692,3 @@ module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");