Merge tag 'exynos-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

From Kukjin Kim:
Update exynos DT for
- usb3phy and dwc3 for exynos5250
- keypad for exynos4412
- TMU clock for exynos4210
- MFC clock for exynos4
- DP controller for exynos5250
- G2D clock for exynos4
- some exynos boards

* tag 'exynos-dt-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (456 commits)
  ARM: dts: add ohci and ehci controller nodes for EXYNOS5440
  ARM: dts: Update G2D documentation for clock entries
  ARM: dts: Add clock entries to G2D node for exynos4x12
  ARM: dts: Add clock entries to G2D node for exynos4210
  ARM: dts: Remove duplicate and add missing G2D nodes
  clk: exynos4: Add additional G2D clocks
  ARM: dts: Document DP clock in samsung,exynos5-dp binding
  ARM: dts: add pin state information for DP HPD support to Exynos5250
  ARM: dts: add dts node for the ahci sata exynos5440
  ARM: dts: add vmmc regulator support for ODROID-X
  ARM: dts: add max77686 node entry for ODROID-X
  ARM: dts: Enable RTC by default on EXYNOS5440
  ARM: dts: Add display timing node to exynos5250-arndale.dts
  ARM: dts: Add clock provider information for DP controller in Exynos5250 SoC
  ARM: dts: Add DT node for DP controller for Arndale Board
  ARM: dts: Remove combiner IRQ node from exynos4x12.dtsi
  ARM: dts: add max8997 device node for exynos4210-origen board
  ARM: dts: Enable TMU on Origen4210 board
  ARM: dts: Add TMU clock entries to exynos4210.dtsi
  ARM: dts: Update MFC documentation for clock entries
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 27 insertions, 8 deletions

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index a0d5ea54598..7e998081e1c 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2142,13 +2142,21 @@ static int mos7840_ioctl(struct tty_struct *tty,
 static int mos7810_check(struct usb_serial *serial)
 {
 	int i, pass_count = 0;
+	u8 *buf;
 	__u16 data = 0, mcr_data = 0;
 	__u16 test_pattern = 0x55AA;
+	int res;
+
+	buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (!buf)
+		return 0;	/* failed to identify 7810 */
 
 	/* Store MCR setting */
-	usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+	res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 		MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER,
-		&mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+	if (res == VENDOR_READ_LENGTH)
+		mcr_data = *buf;
 
 	for (i = 0; i < 16; i++) {
 		/* Send the 1-bit test pattern out to MCS7810 test pin */
@@ -2158,9 +2166,12 @@ static int mos7810_check(struct usb_serial *serial)
 			MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT);
 
 		/* Read the test pattern back */
-		usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-			MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
-			VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		res = usb_control_msg(serial->dev,
+				usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ,
+				MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+				VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		if (res == VENDOR_READ_LENGTH)
+			data = *buf;
 
 		/* If this is a MCS7810 device, both test patterns must match */
 		if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001)
@@ -2174,6 +2185,8 @@ static int mos7810_check(struct usb_serial *serial)
 		MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL,
 		0, MOS_WDR_TIMEOUT);
 
+	kfree(buf);
+
 	if (pass_count == 16)
 		return 1;
 
@@ -2183,11 +2196,17 @@ static int mos7810_check(struct usb_serial *serial)
 static int mos7840_calc_num_ports(struct usb_serial *serial)
 {
 	__u16 data = 0x00;
+	u8 *buf;
 	int mos7840_num_ports;
 
-	usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-		MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
-		VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+	buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (buf) {
+		usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+			MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+			VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		data = *buf;
+		kfree(buf);
+	}
 
 	if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 ||
 		serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) {