Merge commit 'v2.6.30-rc5' into x86/apic

Merge reason: this branch was on a .30-rc2 base - sync it up with
              all the latest fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 26 insertions, 17 deletions

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2c20e88a91b..84fb1dcd30d 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -38,7 +38,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "1.3.1"
+#define DRIVER_VERSION "1.3.2"
 #define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver"
 
 /*
@@ -123,6 +123,11 @@
 #define BANDB_DEVICE_ID_USOPTL4_4       0xAC44
 #define BANDB_DEVICE_ID_USOPTL4_2       0xAC42
 
+/* This driver also supports the ATEN UC2324 device since it is mos7840 based
+ *  - if I knew the device id it would also support the ATEN UC2322 */
+#define USB_VENDOR_ID_ATENINTL		0x0557
+#define ATENINTL_DEVICE_ID_UC2324	0x2011
+
 /* Interrupt Routine Defines    */
 
 #define SERIAL_IIR_RLS      0x06
@@ -170,6 +175,7 @@ static struct usb_device_id moschip_port_id_table[] = {
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{}			/* terminating entry */
 };
 
@@ -178,6 +184,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
 	{}			/* terminating entry */
 };
 
@@ -1000,12 +1007,6 @@ static int mos7840_open(struct tty_struct *tty,
 	status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
 									Data);
 
-	/* force low_latency on so that our tty_push actually forces *
-	 * the data through,otherwise it is scheduled, and with      *
-	 * high data rates (like with OHCI) data can get lost.       */
-	if (tty)
-		tty->low_latency = 1;
-
 	/* Check to see if we've set up our endpoint info yet    *
 	 * (can't set it up in mos7840_startup as the structures *
 	 * were not set up at that time.)                        */
@@ -2477,9 +2478,14 @@ static int mos7840_startup(struct usb_serial *serial)
 		mos7840_set_port_private(serial->port[i], mos7840_port);
 		spin_lock_init(&mos7840_port->pool_lock);
 
-		mos7840_port->port_num = ((serial->port[i]->number -
-					   (serial->port[i]->serial->minor)) +
-					  1);
+		/* minor is not initialised until later by
+		 * usb-serial.c:get_free_serial() and cannot therefore be used
+		 * to index device instances */
+		mos7840_port->port_num = i + 1;
+		dbg ("serial->port[i]->number = %d", serial->port[i]->number);
+		dbg ("serial->port[i]->serial->minor = %d", serial->port[i]->serial->minor);
+		dbg ("mos7840_port->port_num = %d", mos7840_port->port_num);
+		dbg ("serial->minor = %d", serial->minor);
 
 		if (mos7840_port->port_num == 1) {
 			mos7840_port->SpRegOffset = 0x0;
@@ -2690,13 +2696,16 @@ static void mos7840_shutdown(struct usb_serial *serial)
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		mos7840_port = mos7840_get_port_private(serial->port[i]);
-		spin_lock_irqsave(&mos7840_port->pool_lock, flags);
-		mos7840_port->zombie = 1;
-		spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
-		usb_kill_urb(mos7840_port->control_urb);
-		kfree(mos7840_port->ctrl_buf);
-		kfree(mos7840_port->dr);
-		kfree(mos7840_port);
+		dbg ("mos7840_port %d = %p", i, mos7840_port);
+		if (mos7840_port) {
+			spin_lock_irqsave(&mos7840_port->pool_lock, flags);
+			mos7840_port->zombie = 1;
+			spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
+			usb_kill_urb(mos7840_port->control_urb);
+			kfree(mos7840_port->ctrl_buf);
+			kfree(mos7840_port->dr);
+			kfree(mos7840_port);
+		}
 		mos7840_set_port_private(serial->port[i], NULL);
 	}