Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (220 commits)
  USB: backlight, appledisplay: fix incomplete registration failure handling
  USB: pl2303: remove unnecessary reset of usb_device in urbs
  USB: ftdi_sio: remove obsolete check in unthrottle
  USB: ftdi_sio: remove unused tx_bytes counter
  USB: qcaux: driver for auxiliary serial ports on Qualcomm devices
  USB: pl2303: initial TIOCGSERIAL support
  USB: option: add Longcheer/Longsung vendor ID
  USB: fix I2C API usage in ohci-pnx4008.
  USB: usbmon: mask seconds properly in text API
  USB: sisusbvga: no unnecessary GFP_ATOMIC
  USB: storage: onetouch: unnecessary GFP_ATOMIC
  USB: serial: ftdi: add CONTEC vendor and product id
  USB: remove references to port->port.count from the serial drivers
  USB: tty: Prune uses of tty_request_room in the USB layer
  USB: tty: Add a function to insert a string of characters with the same flag
  USB: don't read past config->interface[] if usb_control_msg() fails in usb_reset_configuration()
  USB: tty: kill request_room for USB ACM class
  USB: tty: sort out the request_room handling for whiteheat
  USB: storage: fix misplaced parenthesis
  USB: vstusb.c: removal of driver for Vernier Software & Technology, Inc., devices and spectrometers
  ...

1 files changed, 18 insertions, 20 deletions

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 9ec1a49e236..73d5f346d3e 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -50,7 +50,7 @@ struct pl2303_buf {
 	char		*buf_put;
 };
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
@@ -451,7 +451,6 @@ static void pl2303_send(struct usb_serial_port *port)
 			      port->write_urb->transfer_buffer);
 
 	port->write_urb->transfer_buffer_length = count;
-	port->write_urb->dev = port->serial->dev;
 	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting write urb,"
@@ -769,7 +768,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 		pl2303_set_termios(tty, port, &tmp_termios);
 
 	dbg("%s - submitting read urb", __func__);
-	port->read_urb->dev = serial->dev;
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting read urb,"
@@ -779,7 +777,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 	}
 
 	dbg("%s - submitting interrupt urb", __func__);
-	port->interrupt_in_urb->dev = serial->dev;
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
@@ -895,10 +892,23 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 static int pl2303_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg)
 {
+	struct serial_struct ser;
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
 
 	switch (cmd) {
+	case TIOCGSERIAL:
+		memset(&ser, 0, sizeof ser);
+		ser.type = PORT_16654;
+		ser.line = port->serial->minor;
+		ser.port = port->number;
+		ser.baud_base = 460800;
+
+		if (copy_to_user((void __user *)arg, &ser, sizeof ser))
+			return -EFAULT;
+
+		return 0;
+
 	case TIOCMIWAIT:
 		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
 		return wait_modem_info(port, arg);
@@ -1042,7 +1052,6 @@ static void pl2303_push_data(struct tty_struct *tty,
 		tty_flag = TTY_FRAME;
 	dbg("%s - tty_flag = %d", __func__, tty_flag);
 
-	tty_buffer_request_room(tty, urb->actual_length + 1);
 	/* overrun is special, not associated with a char */
 	if (line_status & UART_OVERRUN_ERROR)
 		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
@@ -1072,16 +1081,11 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 
 	if (status) {
 		dbg("%s - urb status = %d", __func__, status);
-		if (!port->port.count) {
-			dbg("%s - port is closed, exiting.", __func__);
-			return;
-		}
 		if (status == -EPROTO) {
 			/* PL2303 mysteriously fails with -EPROTO reschedule
 			 * the read */
 			dbg("%s - caught -EPROTO, resubmitting the urb",
 			    __func__);
-			urb->dev = port->serial->dev;
 			result = usb_submit_urb(urb, GFP_ATOMIC);
 			if (result)
 				dev_err(&urb->dev->dev, "%s - failed"
@@ -1108,15 +1112,10 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 	}
 	tty_kref_put(tty);
 	/* Schedule the next read _if_ we are still open */
-	if (port->port.count) {
-		urb->dev = port->serial->dev;
-		result = usb_submit_urb(urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&urb->dev->dev, "%s - failed resubmitting"
-				" read urb, error %d\n", __func__, result);
-	}
-
-	return;
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result && result != -EPERM)
+		dev_err(&urb->dev->dev, "%s - failed resubmitting"
+			" read urb, error %d\n", __func__, result);
 }
 
 static void pl2303_write_bulk_callback(struct urb *urb)
@@ -1146,7 +1145,6 @@ static void pl2303_write_bulk_callback(struct urb *urb)
 		dbg("%s - nonzero write bulk status received: %d", __func__,
 		    status);
 		port->write_urb->transfer_buffer_length = 1;
-		port->write_urb->dev = port->serial->dev;
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (result)
 			dev_err(&urb->dev->dev, "%s - failed resubmitting write"