Merge remote branch 'intel/drm-intel-next' of ../drm-next into drm-core-next

* 'intel/drm-intel-next' of ../drm-next: (755 commits)
  drm/i915: Only wait on a pending flip if we intend to write to the buffer
  drm/i915/dp: Sanity check eDP existence
  drm/i915: Rebind the buffer if its alignment constraints changes with tiling
  drm/i915: Disable GPU semaphores by default
  drm/i915: Do not overflow the MMADDR write FIFO
  Revert "drm/i915: fix corruptions on i8xx due to relaxed fencing"
  drm/i915: Don't save/restore hardware status page address register
  drm/i915: don't store the reg value for HWS_PGA
  drm/i915: fix memory corruption with GM965 and >4GB RAM
  Linux 2.6.38-rc7
  Revert "TPM: Long default timeout fix"
  drm/i915: Re-enable GPU semaphores for SandyBridge mobile
  drm/i915: Replace vblank PM QoS with "Interrupt-Based AGPBUSY#"
  Revert "drm/i915: Use PM QoS to prevent C-State starvation of gen3 GPU"
  drm/i915: Allow relocation deltas outside of target bo
  drm/i915: Silence an innocuous compiler warning for an unused variable
  fs/block_dev.c: fix new kernel-doc warning
  ACPI: Fix build for CONFIG_NET unset
  mm: <asm-generic/pgtable.h> must include <linux/mm_types.h>
  x86: Use u32 instead of long to set reset vector back to 0
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_gem.c

7 files changed, 66 insertions, 9 deletions

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 4787c0cd063..f349a3629d0 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -100,6 +100,7 @@ struct ftdi_sio_quirk {
 static int   ftdi_jtag_probe(struct usb_serial *serial);
 static int   ftdi_mtxorb_hack_setup(struct usb_serial *serial);
 static int   ftdi_NDI_device_setup(struct usb_serial *serial);
+static int   ftdi_stmclite_probe(struct usb_serial *serial);
 static void  ftdi_USB_UIRT_setup(struct ftdi_private *priv);
 static void  ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
 
@@ -123,6 +124,10 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 	.port_probe = ftdi_HE_TIRA1_setup,
 };
 
+static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
+	.probe	= ftdi_stmclite_probe,
+};
+
 /*
  * The 8U232AM has the same API as the sio except for:
  * - it can support MUCH higher baudrates; up to:
@@ -616,6 +621,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
 	{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
+	{ USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) },
 	{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
 	{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
 	{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
@@ -810,6 +816,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
 	{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -1709,6 +1717,25 @@ static int ftdi_jtag_probe(struct usb_serial *serial)
 }
 
 /*
+ * First and second port on STMCLiteadaptors is reserved for JTAG interface
+ * and the forth port for pio
+ */
+static int ftdi_stmclite_probe(struct usb_serial *serial)
+{
+	struct usb_device *udev = serial->dev;
+	struct usb_interface *interface = serial->interface;
+
+	dbg("%s", __func__);
+
+	if (interface == udev->actconfig->interface[2])
+		return 0;
+
+	dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+
+	return -ENODEV;
+}
+
+/*
  * The Matrix Orbital VK204-25-USB has an invalid IN endpoint.
  * We have to correct it if we want to read from it.
  */
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index ed160def858..117e8e6f93c 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -518,6 +518,12 @@
 #define RATOC_PRODUCT_ID_USB60F	0xb020
 
 /*
+ * Acton Research Corp.
+ */
+#define ACTON_VID		0x0647	/* Vendor ID */
+#define ACTON_SPECTRAPRO_PID	0x0100
+
+/*
  * Contec products (http://www.contec.com)
  * Submitted by Daniel Sangorrin
  */
@@ -1034,6 +1040,12 @@
 #define WHT_PID			0x0004 /* Wireless Handheld Terminal */
 
 /*
+ * STMicroelectonics
+ */
+#define ST_VID			0x0483
+#define ST_STMCLT1030_PID	0x3747 /* ST Micro Connect Lite STMCLT1030 */
+
+/*
  * Papouch products (http://www.papouch.com/)
  * Submitted by Folkert van Heusden
  */
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index cd769ef24f8..3b246d93cf2 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2889,8 +2889,8 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
 
 	dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build);
 
-	edge_serial->product_info.FirmwareMajorVersion = fw->data[0];
-	edge_serial->product_info.FirmwareMinorVersion = fw->data[1];
+	edge_serial->product_info.FirmwareMajorVersion = rec->data[0];
+	edge_serial->product_info.FirmwareMinorVersion = rec->data[1];
 	edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build);
 
 	for (rec = ihex_next_binrec(rec); rec;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 7481ff8a49e..0457813eebe 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -301,6 +301,9 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
+	{ USB_DEVICE(0x0f3d, 0x68A3), 	/* Airprime/Sierra Wireless Direct IP modems */
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+	},
        { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
 
 	{ }
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index b2902f307b4..a910004f407 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -369,9 +369,9 @@ failed_1port:
 
 static void __exit ti_exit(void)
 {
+	usb_deregister(&ti_usb_driver);
 	usb_serial_deregister(&ti_1port_device);
 	usb_serial_deregister(&ti_2port_device);
-	usb_deregister(&ti_usb_driver);
 }
 
 
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index b004b2a485c..9c014e2ecd6 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -295,12 +295,15 @@ static void usb_wwan_indat_callback(struct urb *urb)
 		    __func__, status, endpoint);
 	} else {
 		tty = tty_port_tty_get(&port->port);
-		if (urb->actual_length) {
-			tty_insert_flip_string(tty, data, urb->actual_length);
-			tty_flip_buffer_push(tty);
-		} else
-			dbg("%s: empty read urb received", __func__);
-		tty_kref_put(tty);
+		if (tty) {
+			if (urb->actual_length) {
+				tty_insert_flip_string(tty, data,
+						urb->actual_length);
+				tty_flip_buffer_push(tty);
+			} else
+				dbg("%s: empty read urb received", __func__);
+			tty_kref_put(tty);
+		}
 
 		/* Resubmit urb so we continue receiving */
 		if (status != -ESHUTDOWN) {
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 15a5d89b7f3..1c11959a7d5 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -27,6 +27,7 @@
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/usb/cdc.h>
 #include "visor.h"
 
 /*
@@ -479,6 +480,17 @@ static int visor_probe(struct usb_serial *serial,
 
 	dbg("%s", __func__);
 
+	/*
+	 * some Samsung Android phones in modem mode have the same ID
+	 * as SPH-I500, but they are ACM devices, so dont bind to them
+	 */
+	if (id->idVendor == SAMSUNG_VENDOR_ID &&
+		id->idProduct == SAMSUNG_SPH_I500_ID &&
+		serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM &&
+		serial->dev->descriptor.bDeviceSubClass ==
+			USB_CDC_SUBCLASS_ACM)
+		return -ENODEV;
+
 	if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
 		dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
 			serial->dev->actconfig->desc.bConfigurationValue);