Merge branch 'writeback-for-2.6.34' into nfs-for-2.6.34

53 files changed, 1062 insertions, 655 deletions

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index c480ea4c19f..c78b255e3f8 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -472,6 +472,17 @@ config USB_SERIAL_OTI6858
 	  To compile this driver as a module, choose M here: the
 	  module will be called oti6858.
 
+config USB_SERIAL_QCAUX
+	tristate "USB Qualcomm Auxiliary Serial Port Driver"
+	---help---
+	  Say Y here if you want to use the auxiliary serial ports provided
+	  by many modems based on Qualcomm chipsets.  These ports often use
+	  a proprietary protocol called DM and cannot be used for AT- or
+	  PPP-based communication.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called moto_modem.  If unsure, choose N.
+
 config USB_SERIAL_QUALCOMM
 	tristate "USB Qualcomm Serial modem"
 	help
@@ -600,6 +611,14 @@ config USB_SERIAL_OPTICON
 	  To compile this driver as a module, choose M here: the
 	  module will be called opticon.
 
+config USB_SERIAL_VIVOPAY_SERIAL
+        tristate "USB ViVOpay serial interface driver"
+        help
+          Say Y here if you want to use a ViVOtech ViVOpay USB device.
+
+          To compile this driver as a module, choose M here: the
+          module will be called vivopay-serial.
+
 config USB_SERIAL_DEBUG
 	tristate "USB Debugging Device"
 	help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 66619beb6cc..83c9e431a56 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_USB_SERIAL_OPTICON)		+= opticon.o
 obj-$(CONFIG_USB_SERIAL_OPTION)			+= option.o
 obj-$(CONFIG_USB_SERIAL_OTI6858)		+= oti6858.o
 obj-$(CONFIG_USB_SERIAL_PL2303)			+= pl2303.o
+obj-$(CONFIG_USB_SERIAL_QCAUX)			+= qcaux.o
 obj-$(CONFIG_USB_SERIAL_QUALCOMM)		+= qcserial.o
 obj-$(CONFIG_USB_SERIAL_SAFE)			+= safe_serial.o
 obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI)		+= siemens_mpi.o
@@ -55,4 +56,5 @@ obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
 obj-$(CONFIG_USB_SERIAL_VISOR)			+= visor.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o
 obj-$(CONFIG_USB_SERIAL_XIRCOM)			+= keyspan_pda.o
+obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL)	+= vivopay-serial.o
 
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index b10ac840941..365db1097bf 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -78,7 +78,7 @@ static int debug;
 #define DRIVER_DESC "AIRcable USB Driver"
 
 /* ID table that will be registered with USB core */
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(AIRCABLE_VID, AIRCABLE_USB_PID) },
 	{ },
 };
@@ -468,10 +468,6 @@ static void aircable_read_bulk_callback(struct urb *urb)
 
 	if (status) {
 		dbg("%s - urb status = %d", __func__, status);
-		if (!port->port.count) {
-			dbg("%s - port is closed, exiting.", __func__);
-			return;
-		}
 		if (status == -EPROTO) {
 			dbg("%s - caught -EPROTO, resubmitting the urb",
 			    __func__);
@@ -530,23 +526,19 @@ static void aircable_read_bulk_callback(struct urb *urb)
 	}
 	tty_kref_put(tty);
 
-	/* Schedule the next read _if_ we are still open */
-	if (port->port.count) {
-		usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-				  usb_rcvbulkpipe(port->serial->dev,
-					  port->bulk_in_endpointAddress),
-				  port->read_urb->transfer_buffer,
-				  port->read_urb->transfer_buffer_length,
-				  aircable_read_bulk_callback, port);
-
-		result = usb_submit_urb(urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&urb->dev->dev,
-				"%s - failed resubmitting read urb, error %d\n",
-				__func__, result);
-	}
-
-	return;
+	/* Schedule the next read */
+	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
+			  usb_rcvbulkpipe(port->serial->dev,
+				  port->bulk_in_endpointAddress),
+			  port->read_urb->transfer_buffer,
+			  port->read_urb->transfer_buffer_length,
+			  aircable_read_bulk_callback, port);
+
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result && result != -EPERM)
+		dev_err(&urb->dev->dev,
+			"%s - failed resubmitting read urb, error %d\n",
+			__func__, result);
 }
 
 /* Based on ftdi_sio.c throttle */
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index a9c2dec8e3f..547c9448c28 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -50,7 +50,7 @@ static int debug;
 /* usb timeout of 1 second */
 #define ARK_TIMEOUT (1*HZ)
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x6547, 0x0232) },
 	{ USB_DEVICE(0x18ec, 0x3118) },		/* USB to IrDA adapter */
 	{ },
@@ -733,7 +733,6 @@ static void ark3116_read_bulk_callback(struct urb *urb)
 
 		tty = tty_port_tty_get(&port->port);
 		if (tty) {
-			tty_buffer_request_room(tty, urb->actual_length + 1);
 			/* overrun is special, not associated with a char */
 			if (unlikely(lsr & UART_LSR_OE))
 				tty_insert_flip_char(tty, 0, TTY_OVERRUN);
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index a0467bc6162..1295e44e3f1 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -103,7 +103,7 @@ static int  belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
 					unsigned int set, unsigned int clear);
 
 
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) },
 	{ USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) },
 	{ USB_DEVICE(PERACOM_VID, PERACOM_PID) },
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 59eff721fcc..9f4fed1968b 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -22,6 +22,7 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include <linux/serial.h>
+#include <asm/unaligned.h>
 
 #define DEFAULT_BAUD_RATE 9600
 #define DEFAULT_TIMEOUT   1000
@@ -70,7 +71,7 @@
 
 static int debug;
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x4348, 0x5523) },
 	{ USB_DEVICE(0x1a86, 0x7523) },
 	{ },
@@ -392,16 +393,22 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
 	struct usb_serial_port *port = tty->driver_data;
 	int r;
 	uint16_t reg_contents;
-	uint8_t break_reg[2];
+	uint8_t *break_reg;
 
 	dbg("%s()", __func__);
 
+	break_reg = kmalloc(2, GFP_KERNEL);
+	if (!break_reg) {
+		dev_err(&port->dev, "%s - kmalloc failed\n", __func__);
+		return;
+	}
+
 	r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG,
-			ch341_break_reg, 0, break_reg, sizeof(break_reg));
+			ch341_break_reg, 0, break_reg, 2);
 	if (r < 0) {
-		printk(KERN_WARNING "%s: USB control read error whilst getting"
-				" break register contents.\n", __FILE__);
-		return;
+		dev_err(&port->dev, "%s - USB control read error (%d)\n",
+				__func__, r);
+		goto out;
 	}
 	dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x",
 			__func__, break_reg[0], break_reg[1]);
@@ -416,12 +423,14 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
 	}
 	dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x",
 			__func__, break_reg[0], break_reg[1]);
-	reg_contents = (uint16_t)break_reg[0] | ((uint16_t)break_reg[1] << 8);
+	reg_contents = get_unaligned_le16(break_reg);
 	r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
 			ch341_break_reg, reg_contents);
 	if (r < 0)
-		printk(KERN_WARNING "%s: USB control write error whilst setting"
-				" break register contents.\n", __FILE__);
+		dev_err(&port->dev, "%s - USB control write error (%d)\n",
+				__func__, r);
+out:
+	kfree(break_reg);
 }
 
 static int ch341_tiocmset(struct tty_struct *tty, struct file *file,
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index bd254ec97d1..507382b0a9e 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -55,7 +55,7 @@ static int cp210x_carrier_raised(struct usb_serial_port *p);
 
 static int debug;
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
 	{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
 	{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
@@ -91,11 +91,12 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
 	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
+	{ USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
 	{ USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
 	{ USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
 	{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
-	{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
+	{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesys ETRX2USB */
 	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
@@ -612,7 +613,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
 				baud);
 		if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV,
 					((BAUD_RATE_GEN_FREQ + baud/2) / baud))) {
-			dbg("Baud rate requested not supported by device\n");
+			dbg("Baud rate requested not supported by device");
 			baud = tty_termios_baud_rate(old_termios);
 		}
 	}
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index b0f6402a91c..f744ab7a3b1 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -70,7 +70,7 @@ static void cyberjack_read_int_callback(struct urb *urb);
 static void cyberjack_read_bulk_callback(struct urb *urb);
 static void cyberjack_write_bulk_callback(struct urb *urb);
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) },
 	{ }			/* Terminating entry */
 };
@@ -391,11 +391,10 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
 
 	tty = tty_port_tty_get(&port->port);
 	if (!tty) {
-		dbg("%s - ignoring since device not open\n", __func__);
+		dbg("%s - ignoring since device not open", __func__);
 		return;
 	}
 	if (urb->actual_length) {
-		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index a591ebec0f8..baf74b44e6e 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -66,17 +66,15 @@
 #include <linux/serial.h>
 #include <linux/delay.h>
 #include <linux/uaccess.h>
+#include <asm/unaligned.h>
 
 #include "cypress_m8.h"
 
 
-#ifdef CONFIG_USB_SERIAL_DEBUG
-	static int debug = 1;
-#else
-	static int debug;
-#endif
+static int debug;
 static int stats;
 static int interval;
+static int unstable_bauds;
 
 /*
  * Version Information
@@ -89,24 +87,24 @@ static int interval;
 #define CYPRESS_BUF_SIZE	1024
 #define CYPRESS_CLOSING_WAIT	(30*HZ)
 
-static struct usb_device_id id_table_earthmate [] = {
+static const struct usb_device_id id_table_earthmate[] = {
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 	{ }						/* Terminating entry */
 };
 
-static struct usb_device_id id_table_cyphidcomrs232 [] = {
+static const struct usb_device_id id_table_cyphidcomrs232[] = {
 	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 	{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
 	{ }						/* Terminating entry */
 };
 
-static struct usb_device_id id_table_nokiaca42v2 [] = {
+static const struct usb_device_id id_table_nokiaca42v2[] = {
 	{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
 	{ }						/* Terminating entry */
 };
 
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
@@ -295,6 +293,9 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
 	struct cypress_private *priv;
 	priv = usb_get_serial_port_data(port);
 
+	if (unstable_bauds)
+		return new_rate;
+
 	/*
 	 * The general purpose firmware for the Cypress M8 allows for
 	 * a maximum speed of 57600bps (I have no idea whether DeLorme
@@ -344,7 +345,8 @@ static int cypress_serial_control(struct tty_struct *tty,
 {
 	int new_baudrate = 0, retval = 0, tries = 0;
 	struct cypress_private *priv;
-	__u8 feature_buffer[5];
+	u8 *feature_buffer;
+	const unsigned int feature_len = 5;
 	unsigned long flags;
 
 	dbg("%s", __func__);
@@ -354,17 +356,18 @@ static int cypress_serial_control(struct tty_struct *tty,
 	if (!priv->comm_is_ok)
 		return -ENODEV;
 
+	feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL);
+	if (!feature_buffer)
+		return -ENOMEM;
+
 	switch (cypress_request_type) {
 	case CYPRESS_SET_CONFIG:
-		new_baudrate = priv->baud_rate;
 		/* 0 means 'Hang up' so doesn't change the true bit rate */
-		if (baud_rate == 0)
-			new_baudrate = priv->baud_rate;
-		/* Change of speed ? */
-		else if (baud_rate != priv->baud_rate) {
+		new_baudrate = priv->baud_rate;
+		if (baud_rate && baud_rate != priv->baud_rate) {
 			dbg("%s - baud rate is changing", __func__);
 			retval = analyze_baud_rate(port, baud_rate);
-			if (retval >=  0) {
+			if (retval >= 0) {
 				new_baudrate = retval;
 				dbg("%s - New baud rate set to %d",
 				    __func__, new_baudrate);
@@ -373,9 +376,8 @@ static int cypress_serial_control(struct tty_struct *tty,
 		dbg("%s - baud rate is being sent as %d",
 					__func__, new_baudrate);
 
-		memset(feature_buffer, 0, sizeof(feature_buffer));
 		/* fill the feature_buffer with new configuration */
-		*((u_int32_t *)feature_buffer) = new_baudrate;
+		put_unaligned_le32(new_baudrate, feature_buffer);
 		feature_buffer[4] |= data_bits;   /* assign data bits in 2 bit space ( max 3 ) */
 		/* 1 bit gap */
 		feature_buffer[4] |= (stop_bits << 3);   /* assign stop bits in 1 bit space */
@@ -397,15 +399,15 @@ static int cypress_serial_control(struct tty_struct *tty,
 					HID_REQ_SET_REPORT,
 					USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 					0x0300, 0, feature_buffer,
-					sizeof(feature_buffer), 500);
+					feature_len, 500);
 
 			if (tries++ >= 3)
 				break;
 
-		} while (retval != sizeof(feature_buffer) &&
+		} while (retval != feature_len &&
 			 retval != -ENODEV);
 
-		if (retval != sizeof(feature_buffer)) {
+		if (retval != feature_len) {
 			dev_err(&port->dev, "%s - failed sending serial "
 				"line settings - %d\n", __func__, retval);
 			cypress_set_dead(port);
@@ -425,43 +427,42 @@ static int cypress_serial_control(struct tty_struct *tty,
 			/* Not implemented for this device,
 			   and if we try to do it we're likely
 			   to crash the hardware. */
-			return -ENOTTY;
+			retval = -ENOTTY;
+			goto out;
 		}
 		dbg("%s - retreiving serial line settings", __func__);
-		/* set initial values in feature buffer */
-		memset(feature_buffer, 0, sizeof(feature_buffer));
-
 		do {
 			retval = usb_control_msg(port->serial->dev,
 					usb_rcvctrlpipe(port->serial->dev, 0),
 					HID_REQ_GET_REPORT,
 					USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 					0x0300, 0, feature_buffer,
-					sizeof(feature_buffer), 500);
+					feature_len, 500);
 
 			if (tries++ >= 3)
 				break;
-		} while (retval != sizeof(feature_buffer)
+		} while (retval != feature_len
 						&& retval != -ENODEV);
 
-		if (retval != sizeof(feature_buffer)) {
+		if (retval != feature_len) {
 			dev_err(&port->dev, "%s - failed to retrieve serial "
 				"line settings - %d\n", __func__, retval);
 			cypress_set_dead(port);
-			return retval;
+			goto out;
 		} else {
 			spin_lock_irqsave(&priv->lock, flags);
 			/* store the config in one byte, and later
 			   use bit masks to check values */
 			priv->current_config = feature_buffer[4];
-			priv->baud_rate = *((u_int32_t *)feature_buffer);
+			priv->baud_rate = get_unaligned_le32(feature_buffer);
 			spin_unlock_irqrestore(&priv->lock, flags);
 		}
 	}
 	spin_lock_irqsave(&priv->lock, flags);
 	++priv->cmd_count;
 	spin_unlock_irqrestore(&priv->lock, flags);
-
+out:
+	kfree(feature_buffer);
 	return retval;
 } /* cypress_serial_control */
 
@@ -690,7 +691,6 @@ static void cypress_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	/* drop dtr and rts */
-	priv = usb_get_serial_port_data(port);
 	spin_lock_irq(&priv->lock);
 	if (on == 0)
 		priv->line_control = 0;
@@ -1307,13 +1307,9 @@ static void cypress_read_int_callback(struct urb *urb)
 		spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* process read if there is data other than line status */
-	if (tty && (bytes > i)) {
-		bytes = tty_buffer_request_room(tty, bytes);
-		for (; i < bytes ; ++i) {
-			dbg("pushing byte number %d - %d - %c", i, data[i],
-					data[i]);
-			tty_insert_flip_char(tty, data[i], tty_flag);
-		}
+	if (tty && bytes > i) {
+		tty_insert_flip_string_fixed_flag(tty, data + i,
+				bytes - i, tty_flag);
 		tty_flip_buffer_push(tty);
 	}
 
@@ -1325,9 +1321,9 @@ static void cypress_read_int_callback(struct urb *urb)
 continue_read:
 	tty_kref_put(tty);
 
-	/* Continue trying to always read... unless the port has closed. */
+	/* Continue trying to always read */
 
-	if (port->port.count > 0 && priv->comm_is_ok) {
+	if (priv->comm_is_ok) {
 		usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
 				usb_rcvintpipe(port->serial->dev,
 					port->interrupt_in_endpointAddress),
@@ -1336,7 +1332,7 @@ continue_read:
 				cypress_read_int_callback, port,
 				priv->read_urb_interval);
 		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
-		if (result) {
+		if (result && result != -EPERM) {
 			dev_err(&urb->dev->dev, "%s - failed resubmitting "
 					"read urb, error %d\n", __func__,
 					result);
@@ -1650,3 +1646,5 @@ module_param(stats, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(stats, "Enable statistics or not");
 module_param(interval, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(interval, "Overrides interrupt interval");
+module_param(unstable_bauds, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates");
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 68e80be6b9e..68b0aa5e516 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -470,18 +470,18 @@ static int digi_read_oob_callback(struct urb *urb);
 
 static int debug;
 
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
 	{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
 	{ }						/* Terminating entry */
 };
 
-static struct usb_device_id id_table_2 [] = {
+static const struct usb_device_id id_table_2[] = {
 	{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) },
 	{ }						/* Terminating entry */
 };
 
-static struct usb_device_id id_table_4 [] = {
+static const struct usb_device_id id_table_4[] = {
 	{ USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) },
 	{ }						/* Terminating entry */
 };
@@ -1262,10 +1262,10 @@ static void digi_write_bulk_callback(struct urb *urb)
 		return;
 	}
 
-	/* try to send any buffered data on this port, if it is open */
+	/* try to send any buffered data on this port */
 	spin_lock(&priv->dp_port_lock);
 	priv->dp_write_urb_in_use = 0;
-	if (port->port.count && priv->dp_out_buf_len > 0) {
+	if (priv->dp_out_buf_len > 0) {
 		*((unsigned char *)(port->write_urb->transfer_buffer))
 			= (unsigned char)DIGI_CMD_SEND_DATA;
 		*((unsigned char *)(port->write_urb->transfer_buffer) + 1)
@@ -1288,7 +1288,7 @@ static void digi_write_bulk_callback(struct urb *urb)
 	schedule_work(&priv->dp_wakeup_work);
 
 	spin_unlock(&priv->dp_port_lock);
-	if (ret)
+	if (ret && ret != -EPERM)
 		dev_err(&port->dev,
 			"%s: usb_submit_urb failed, ret=%d, port=%d\n",
 			__func__, ret, priv->dp_port_num);
@@ -1353,8 +1353,7 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	struct ktermios not_termios;
 
-	dbg("digi_open: TOP: port=%d, open_count=%d",
-		priv->dp_port_num, port->port.count);
+	dbg("digi_open: TOP: port=%d", priv->dp_port_num);
 
 	/* be sure the device is started up */
 	if (digi_startup_device(port->serial) != 0)
@@ -1393,8 +1392,7 @@ static void digi_close(struct usb_serial_port *port)
 	unsigned char buf[32];
 	struct digi_port *priv = usb_get_serial_port_data(port);
 
-	dbg("digi_close: TOP: port=%d, open_count=%d",
-		priv->dp_port_num, port->port.count);
+	dbg("digi_close: TOP: port=%d", priv->dp_port_num);
 
 	mutex_lock(&port->serial->disc_mutex);
 	/* if disconnected, just clear flags */
@@ -1629,7 +1627,7 @@ static void digi_read_bulk_callback(struct urb *urb)
 	/* continue read */
 	urb->dev = port->serial->dev;
 	ret = usb_submit_urb(urb, GFP_ATOMIC);
-	if (ret != 0) {
+	if (ret != 0 && ret != -EPERM) {
 		dev_err(&port->dev,
 			"%s: failed resubmitting urb, ret=%d, port=%d\n",
 			__func__, ret, priv->dp_port_num);
@@ -1658,12 +1656,11 @@ static int digi_read_inb_callback(struct urb *urb)
 	int port_status = ((unsigned char *)urb->transfer_buffer)[2];
 	unsigned char *data = ((unsigned char *)urb->transfer_buffer) + 3;
 	int flag, throttled;
-	int i;
 	int status = urb->status;
 
 	/* do not process callbacks on closed ports */
 	/* but do continue the read chain */
-	if (port->port.count == 0)
+	if (urb->status == -ENOENT)
 		return 0;
 
 	/* short/multiple packet check */
@@ -1705,17 +1702,9 @@ static int digi_read_inb_callback(struct urb *urb)
 
 		/* data length is len-1 (one byte of len is port_status) */
 		--len;
-
-		len = tty_buffer_request_room(tty, len);
 		if (len > 0) {
-			/* Hot path */
-			if (flag == TTY_NORMAL)
-				tty_insert_flip_string(tty, data, len);
-			else {
-				for (i = 0; i < len; i++)
-					tty_insert_flip_char(tty,
-								data[i], flag);
-			}
+			tty_insert_flip_string_fixed_flag(tty, data, len,
+									flag);
 			tty_flip_buffer_push(tty);
 		}
 	}
@@ -1776,8 +1765,7 @@ static int digi_read_oob_callback(struct urb *urb)
 
 		tty = tty_port_tty_get(&port->port);
 		rts = 0;
-		if (port->port.count)
-			rts = tty->termios->c_cflag & CRTSCTS;
+		rts = tty->termios->c_cflag & CRTSCTS;
 		
 		if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
 			spin_lock(&priv->dp_port_lock);
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 7dd0e3eadbe..5f740a1eaca 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -93,7 +93,7 @@ static void empeg_init_termios(struct tty_struct *tty);
 static void empeg_write_bulk_callback(struct urb *urb);
 static void empeg_read_bulk_callback(struct urb *urb);
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
@@ -346,7 +346,6 @@ static void empeg_read_bulk_callback(struct urb *urb)
 	tty = tty_port_tty_get(&port->port);
 
 	if (urb->actual_length) {
-		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 		bytes_in += urb->actual_length;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 216f187582a..6af0dfa5f5a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -33,12 +33,12 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/serial.h>
@@ -50,7 +50,7 @@
  * Version Information
  */
 #define DRIVER_VERSION "v1.5.0"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr"
 #define DRIVER_DESC "USB FTDI Serial Converters Driver"
 
 static int debug;
@@ -88,10 +88,10 @@ struct ftdi_private {
 
 	unsigned int latency;		/* latency setting in use */
 	spinlock_t tx_lock;	/* spinlock for transmit state */
-	unsigned long tx_bytes;
 	unsigned long tx_outstanding_bytes;
 	unsigned long tx_outstanding_urbs;
 	unsigned short max_packet_size;
+	struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() */
 };
 
 /* struct ftdi_sio_quirk is used by devices requiring special attention. */
@@ -145,10 +145,15 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 
 
 
+/*
+ * Device ID not listed? Test via module params product/vendor or
+ * /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
+ */
 static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
@@ -552,9 +557,16 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
 	/*
-	 * Due to many user requests for multiple ELV devices we enable
-	 * them by default.
+	 * ELV devices:
 	 */
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
@@ -571,11 +583,17 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
 	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
@@ -596,6 +614,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
 	{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
+	{ USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) },
 	{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
 	{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
 	{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
@@ -697,6 +716,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
 	{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
@@ -718,6 +738,10 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
+	{ USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
+	{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
+	{ USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
+	{ USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -793,7 +817,7 @@ static struct usb_serial_driver ftdi_sio_device = {
 		.name =		"ftdi_sio",
 	},
 	.description =		"FTDI USB Serial Device",
-	.usb_driver = 		&ftdi_driver ,
+	.usb_driver = 		&ftdi_driver,
 	.id_table =		id_table_combined,
 	.num_ports =		1,
 	.probe =		ftdi_sio_probe,
@@ -809,8 +833,8 @@ static struct usb_serial_driver ftdi_sio_device = {
 	.chars_in_buffer =	ftdi_chars_in_buffer,
 	.read_bulk_callback =	ftdi_read_bulk_callback,
 	.write_bulk_callback =	ftdi_write_bulk_callback,
-	.tiocmget =             ftdi_tiocmget,
-	.tiocmset =             ftdi_tiocmset,
+	.tiocmget =		ftdi_tiocmget,
+	.tiocmset =		ftdi_tiocmset,
 	.ioctl =		ftdi_ioctl,
 	.set_termios =		ftdi_set_termios,
 	.break_ctl =		ftdi_break_ctl,
@@ -916,7 +940,6 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
 							unsigned int clear)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	char *buf;
 	unsigned urb_value;
 	int rv;
 
@@ -925,10 +948,6 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
 		return 0;	/* no change */
 	}
 
-	buf = kmalloc(1, GFP_NOIO);
-	if (!buf)
-		return -ENOMEM;
-
 	clear &= ~set;	/* 'set' takes precedence over 'clear' */
 	urb_value = 0;
 	if (clear & TIOCM_DTR)
@@ -944,9 +963,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
 			       FTDI_SIO_SET_MODEM_CTRL_REQUEST,
 			       FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
 			       urb_value, priv->interface,
-			       buf, 0, WDR_TIMEOUT);
-
-	kfree(buf);
+			       NULL, 0, WDR_TIMEOUT);
 	if (rv < 0) {
 		dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
 				__func__,
@@ -1105,16 +1122,11 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
 static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	char *buf;
 	__u16 urb_value;
 	__u16 urb_index;
 	__u32 urb_index_value;
 	int rv;
 
-	buf = kmalloc(1, GFP_NOIO);
-	if (!buf)
-		return -ENOMEM;
-
 	urb_index_value = get_ftdi_divisor(tty, port);
 	urb_value = (__u16)urb_index_value;
 	urb_index = (__u16)(urb_index_value >> 16);
@@ -1127,9 +1139,7 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
 			    FTDI_SIO_SET_BAUDRATE_REQUEST,
 			    FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
 			    urb_value, urb_index,
-			    buf, 0, WDR_SHORT_TIMEOUT);
-
-	kfree(buf);
+			    NULL, 0, WDR_SHORT_TIMEOUT);
 	return rv;
 }
 
@@ -1137,8 +1147,7 @@ static int write_latency_timer(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct usb_device *udev = port->serial->dev;
-	char buf[1];
-	int rv = 0;
+	int rv;
 	int l = priv->latency;
 
 	if (priv->flags & ASYNC_LOW_LATENCY)
@@ -1151,8 +1160,7 @@ static int write_latency_timer(struct usb_serial_port *port)
 			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
 			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
 			     l, priv->interface,
-			     buf, 0, WDR_TIMEOUT);
-
+			     NULL, 0, WDR_TIMEOUT);
 	if (rv < 0)
 		dev_err(&port->dev, "Unable to write latency timer: %i\n", rv);
 	return rv;
@@ -1162,24 +1170,29 @@ static int read_latency_timer(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct usb_device *udev = port->serial->dev;
-	unsigned short latency = 0;
-	int rv = 0;
-
+	unsigned char *buf;
+	int rv;
 
 	dbg("%s", __func__);
 
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
 	rv = usb_control_msg(udev,
 			     usb_rcvctrlpipe(udev, 0),
 			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
 			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
 			     0, priv->interface,
-			     (char *) &latency, 1, WDR_TIMEOUT);
-
-	if (rv < 0) {
+			     buf, 1, WDR_TIMEOUT);
+	if (rv < 0)
 		dev_err(&port->dev, "Unable to read latency timer: %i\n", rv);
-		return -EIO;
-	}
-	return latency;
+	else
+		priv->latency = buf[0];
+
+	kfree(buf);
+
+	return rv;
 }
 
 static int get_serial_info(struct usb_serial_port *port,
@@ -1210,7 +1223,7 @@ static int set_serial_info(struct tty_struct *tty,
 	if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
 		return -EFAULT;
 
-	lock_kernel();
+	mutex_lock(&priv->cfg_lock);
 	old_priv = *priv;
 
 	/* Do error checking and permission checking */
@@ -1218,7 +1231,7 @@ static int set_serial_info(struct tty_struct *tty,
 	if (!capable(CAP_SYS_ADMIN)) {
 		if (((new_serial.flags & ~ASYNC_USR_MASK) !=
 		     (priv->flags & ~ASYNC_USR_MASK))) {
-			unlock_kernel();
+			mutex_unlock(&priv->cfg_lock);
 			return -EPERM;
 		}
 		priv->flags = ((priv->flags & ~ASYNC_USR_MASK) |
@@ -1229,7 +1242,7 @@ static int set_serial_info(struct tty_struct *tty,
 
 	if ((new_serial.baud_base != priv->baud_base) &&
 	    (new_serial.baud_base < 9600)) {
-	    	unlock_kernel();
+		mutex_unlock(&priv->cfg_lock);
 		return -EINVAL;
 	}
 
@@ -1259,11 +1272,11 @@ check_and_exit:
 	     (priv->flags & ASYNC_SPD_MASK)) ||
 	    (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
 	     (old_priv.custom_divisor != priv->custom_divisor))) {
-		unlock_kernel();
+		mutex_unlock(&priv->cfg_lock);
 		change_speed(tty, port);
 	}
 	else
-		unlock_kernel();
+		mutex_unlock(&priv->cfg_lock);
 	return 0;
 
 } /* set_serial_info */
@@ -1319,20 +1332,20 @@ static void ftdi_determine_type(struct usb_serial_port *port)
 					__func__);
 		}
 	} else if (version < 0x200) {
-		/* Old device.  Assume its the original SIO. */
+		/* Old device.  Assume it's the original SIO. */
 		priv->chip_type = SIO;
 		priv->baud_base = 12000000 / 16;
 		priv->write_offset = 1;
 	} else if (version < 0x400) {
-		/* Assume its an FT8U232AM (or FT8U245AM) */
+		/* Assume it's an FT8U232AM (or FT8U245AM) */
 		/* (It might be a BM because of the iSerialNumber bug,
 		 * but it will still work as an AM device.) */
 		priv->chip_type = FT8U232AM;
 	} else if (version < 0x600) {
-		/* Assume its an FT232BM (or FT245BM) */
+		/* Assume it's an FT232BM (or FT245BM) */
 		priv->chip_type = FT232BM;
 	} else {
-		/* Assume its an FT232R  */
+		/* Assume it's an FT232R */
 		priv->chip_type = FT232RL;
 	}
 	dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
@@ -1352,7 +1365,7 @@ static void ftdi_set_max_packet_size(struct usb_serial_port *port)
 	struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
 
 	unsigned num_endpoints;
-	int i = 0;
+	int i;
 
 	num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
 	dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
@@ -1404,7 +1417,7 @@ static ssize_t store_latency_timer(struct device *dev,
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	int v = simple_strtoul(valbuf, NULL, 10);
-	int rv = 0;
+	int rv;
 
 	priv->latency = v;
 	rv = write_latency_timer(port);
@@ -1421,9 +1434,8 @@ static ssize_t store_event_char(struct device *dev,
 	struct usb_serial_port *port = to_usb_serial_port(dev);
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct usb_device *udev = port->serial->dev;
-	char buf[1];
 	int v = simple_strtoul(valbuf, NULL, 10);
-	int rv = 0;
+	int rv;
 
 	dbg("%s: setting event char = %i", __func__, v);
 
@@ -1432,8 +1444,7 @@ static ssize_t store_event_char(struct device *dev,
 			     FTDI_SIO_SET_EVENT_CHAR_REQUEST,
 			     FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
 			     v, priv->interface,
-			     buf, 0, WDR_TIMEOUT);
-
+			     NULL, 0, WDR_TIMEOUT);
 	if (rv < 0) {
 		dbg("Unable to write event character: %i", rv);
 		return -EIO;
@@ -1532,9 +1543,9 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 
 	kref_init(&priv->kref);
 	spin_lock_init(&priv->tx_lock);
+	mutex_init(&priv->cfg_lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
-	/* This will push the characters through immediately rather
-	   than queue a task to deliver them */
+
 	priv->flags = ASYNC_LOW_LATENCY;
 
 	if (quirk && quirk->port_probe)
@@ -1566,7 +1577,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 
 	ftdi_determine_type(port);
 	ftdi_set_max_packet_size(port);
-	read_latency_timer(port);
+	if (read_latency_timer(port) < 0)
+		priv->latency = 16;
 	create_sysfs_attrs(port);
 	return 0;
 }
@@ -1611,8 +1623,6 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial)
 {
 	struct usb_device *udev = serial->dev;
 	int latency = ndi_latency_timer;
-	int rv = 0;
-	char buf[1];
 
 	if (latency == 0)
 		latency = 1;
@@ -1622,10 +1632,11 @@ static int ftdi_NDI_device_setup(struct usb_serial *serial)
 	dbg("%s setting NDI device latency to %d", __func__, latency);
 	dev_info(&udev->dev, "NDI device with a latency value of %d", latency);
 
-	rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+	/* FIXME: errors are not returned */
+	usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
 				FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
-				latency, 0, buf, 0, WDR_TIMEOUT);
+				latency, 0, NULL, 0, WDR_TIMEOUT);
 	return 0;
 }
 
@@ -1701,7 +1712,7 @@ static int ftdi_submit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
 			   urb->transfer_buffer_length,
 			   ftdi_read_bulk_callback, port);
 	result = usb_submit_urb(urb, mem_flags);
-	if (result)
+	if (result && result != -EPERM)
 		dev_err(&port->dev,
 			"%s - failed submitting read urb, error %d\n",
 							__func__, result);
@@ -1713,16 +1724,10 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-
-	int result = 0;
-	char buf[1]; /* Needed for the usb_control_msg I think */
+	int result;
 
 	dbg("%s", __func__);
 
-	spin_lock_irqsave(&priv->tx_lock, flags);
-	priv->tx_bytes = 0;
-	spin_unlock_irqrestore(&priv->tx_lock, flags);
-
 	write_latency_timer(port);
 
 	/* No error checking for this (will get errors later anyway) */
@@ -1730,7 +1735,7 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 	usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE,
 			FTDI_SIO_RESET_SIO,
-			priv->interface, buf, 0, WDR_TIMEOUT);
+			priv->interface, NULL, 0, WDR_TIMEOUT);
 
 	/* Termios defaults are set by usb_serial_init. We don't change
 	   port->tty->termios - this would lose speed settings, etc.
@@ -1758,7 +1763,6 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	char buf[1];
 
 	mutex_lock(&port->serial->disc_mutex);
 	if (!port->serial->disconnected) {
@@ -1767,7 +1771,7 @@ static void ftdi_dtr_rts(struct usb_serial_port *port, int on)
 			    usb_sndctrlpipe(port->serial->dev, 0),
 			    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
 			    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
-			    0, priv->interface, buf, 0,
+			    0, priv->interface, NULL, 0,
 			    WDR_TIMEOUT) < 0) {
 			    dev_err(&port->dev, "error from flowcontrol urb\n");
 		}
@@ -1828,7 +1832,7 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	spin_lock_irqsave(&priv->tx_lock, flags);
 	if (priv->tx_outstanding_urbs > URB_UPPER_LIMIT) {
 		spin_unlock_irqrestore(&priv->tx_lock, flags);
-		dbg("%s - write limit hit\n", __func__);
+		dbg("%s - write limit hit", __func__);
 		return 0;
 	}
 	priv->tx_outstanding_urbs++;
@@ -1908,7 +1912,6 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	} else {
 		spin_lock_irqsave(&priv->tx_lock, flags);
 		priv->tx_outstanding_bytes += count;
-		priv->tx_bytes += count;
 		spin_unlock_irqrestore(&priv->tx_lock, flags);
 	}
 
@@ -2135,8 +2138,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	__u16 urb_value = 0;
-	char buf[1];
+	__u16 urb_value;
 
 	/* break_state = -1 to turn on break, and 0 to turn off break */
 	/* see drivers/char/tty_io.c to see it used */
@@ -2152,7 +2154,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 			FTDI_SIO_SET_DATA_REQUEST,
 			FTDI_SIO_SET_DATA_REQUEST_TYPE,
 			urb_value , priv->interface,
-			buf, 0, WDR_TIMEOUT) < 0) {
+			NULL, 0, WDR_TIMEOUT) < 0) {
 		dev_err(&port->dev, "%s FAILED to enable/disable break state "
 			"(state was %d)\n", __func__, break_state);
 	}
@@ -2176,7 +2178,6 @@ static void ftdi_set_termios(struct tty_struct *tty,
 	struct ktermios *termios = tty->termios;
 	unsigned int cflag = termios->c_cflag;
 	__u16 urb_value; /* will hold the new flags */
-	char buf[1]; /* Perhaps I should dynamically alloc this? */
 
 	/* Added for xon/xoff support */
 	unsigned int iflag = termios->c_iflag;
@@ -2227,12 +2228,10 @@ static void ftdi_set_termios(struct tty_struct *tty,
 	}
 	if (cflag & CSIZE) {
 		switch (cflag & CSIZE) {
-		case CS5: urb_value |= 5; dbg("Setting CS5"); break;
-		case CS6: urb_value |= 6; dbg("Setting CS6"); break;
 		case CS7: urb_value |= 7; dbg("Setting CS7"); break;
 		case CS8: urb_value |= 8; dbg("Setting CS8"); break;
 		default:
-			dev_err(&port->dev, "CSIZE was set but not CS5-CS8\n");
+			dev_err(&port->dev, "CSIZE was set but not CS7-CS8\n");
 		}
 	}
 
@@ -2244,7 +2243,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 			    FTDI_SIO_SET_DATA_REQUEST,
 			    FTDI_SIO_SET_DATA_REQUEST_TYPE,
 			    urb_value , priv->interface,
-			    buf, 0, WDR_SHORT_TIMEOUT) < 0) {
+			    NULL, 0, WDR_SHORT_TIMEOUT) < 0) {
 		dev_err(&port->dev, "%s FAILED to set "
 			"databits/stopbits/parity\n", __func__);
 	}
@@ -2256,7 +2255,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
 				    0, priv->interface,
-				    buf, 0, WDR_TIMEOUT) < 0) {
+				    NULL, 0, WDR_TIMEOUT) < 0) {
 			dev_err(&port->dev,
 				"%s error from disable flowcontrol urb\n",
 				__func__);
@@ -2282,7 +2281,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
 				    0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
-				    buf, 0, WDR_TIMEOUT) < 0) {
+				    NULL, 0, WDR_TIMEOUT) < 0) {
 			dev_err(&port->dev,
 				"urb failed to set to rts/cts flow control\n");
 		}
@@ -2314,7 +2313,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 					    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
 					    urb_value , (FTDI_SIO_XON_XOFF_HS
 							 | priv->interface),
-					    buf, 0, WDR_TIMEOUT) < 0) {
+					    NULL, 0, WDR_TIMEOUT) < 0) {
 				dev_err(&port->dev, "urb failed to set to "
 					"xon/xoff flow control\n");
 			}
@@ -2328,7 +2327,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 					    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
 					    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
 					    0, priv->interface,
-					    buf, 0, WDR_TIMEOUT) < 0) {
+					    NULL, 0, WDR_TIMEOUT) < 0) {
 				dev_err(&port->dev,
 					"urb failed to clear flow control\n");
 			}
@@ -2342,21 +2341,22 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	unsigned char buf[2];
+	unsigned char *buf;
+	int len;
 	int ret;
 
 	dbg("%s TIOCMGET", __func__);
+
+	buf = kmalloc(2, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	/*
+	 * The 8U232AM returns a two byte value (the SIO a 1 byte value) in
+	 * the same format as the data returned from the in point.
+	 */
 	switch (priv->chip_type) {
 	case SIO:
-		/* Request the status from the device */
-		ret = usb_control_msg(port->serial->dev,
-			   usb_rcvctrlpipe(port->serial->dev, 0),
-			   FTDI_SIO_GET_MODEM_STATUS_REQUEST,
-			   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
-			   0, 0,
-			   buf, 1, WDR_TIMEOUT);
-		if (ret < 0)
-			return ret;
+		len = 1;
 		break;
 	case FT8U232AM:
 	case FT232BM:
@@ -2364,27 +2364,30 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
 	case FT232RL:
 	case FT2232H:
 	case FT4232H:
-		/* the 8U232AM returns a two byte value (the sio is a 1 byte
-		   value) - in the same format as the data returned from the in
-		   point */
-		ret = usb_control_msg(port->serial->dev,
-				   usb_rcvctrlpipe(port->serial->dev, 0),
-				   FTDI_SIO_GET_MODEM_STATUS_REQUEST,
-				   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
-				   0, priv->interface,
-				   buf, 2, WDR_TIMEOUT);
-		if (ret < 0)
-			return ret;
+		len = 2;
 		break;
 	default:
-		return -EFAULT;
+		ret = -EFAULT;
+		goto out;
 	}
 
-	return  (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
+	ret = usb_control_msg(port->serial->dev,
+			usb_rcvctrlpipe(port->serial->dev, 0),
+			FTDI_SIO_GET_MODEM_STATUS_REQUEST,
+			FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
+			0, priv->interface,
+			buf, len, WDR_TIMEOUT);
+	if (ret < 0)
+		goto out;
+
+	ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
 		(buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
 		(buf[0]  & FTDI_SIO_RI_MASK  ? TIOCM_RI  : 0) |
 		(buf[0]  & FTDI_SIO_RLSD_MASK ? TIOCM_CD  : 0) |
 		priv->last_dtr_rts;
+out:
+	kfree(buf);
+	return ret;
 }
 
 static int ftdi_tiocmset(struct tty_struct *tty, struct file *file,
@@ -2489,8 +2492,7 @@ void ftdi_unthrottle(struct tty_struct *tty)
 	port->throttled = port->throttle_req = 0;
 	spin_unlock_irqrestore(&port->lock, flags);
 
-	/* Resubmit urb if throttled and open. */
-	if (was_throttled && test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+	if (was_throttled)
 		ftdi_submit_read_urb(port, GFP_KERNEL);
 }
 
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index b0e0d64f822..ff9bf80327a 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -28,13 +28,13 @@
 #define FTDI_SIO_SET_FLOW_CTRL	2 /* Set flow control register */
 #define FTDI_SIO_SET_BAUD_RATE	3 /* Set baud rate */
 #define FTDI_SIO_SET_DATA	4 /* Set the data characteristics of the port */
-#define FTDI_SIO_GET_MODEM_STATUS	5 /* Retrieve current value of modern status register */
+#define FTDI_SIO_GET_MODEM_STATUS	5 /* Retrieve current value of modem status register */
 #define FTDI_SIO_SET_EVENT_CHAR	6 /* Set the event character */
 #define FTDI_SIO_SET_ERROR_CHAR	7 /* Set the error character */
 #define FTDI_SIO_SET_LATENCY_TIMER	9 /* Set the latency timer */
 #define FTDI_SIO_GET_LATENCY_TIMER	10 /* Get the latency timer */
 
-/* Interface indicies for FT2232, FT2232H and FT4232H devices*/
+/* Interface indices for FT2232, FT2232H and FT4232H devices */
 #define INTERFACE_A		1
 #define INTERFACE_B		2
 #define INTERFACE_C		3
@@ -270,7 +270,7 @@ typedef enum {
  *   BmRequestType:  0100 0000b
  *   bRequest:       FTDI_SIO_SET_FLOW_CTRL
  *   wValue:         Xoff/Xon
- *   wIndex:         Protocol/Port - hIndex is protocl / lIndex is port
+ *   wIndex:         Protocol/Port - hIndex is protocol / lIndex is port
  *   wLength:        0
  *   Data:           None
  *
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index da92b4952ff..0727e198503 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -22,7 +22,7 @@
 #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
 #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
-#define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX  */
+#define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX */
 #define FTDI_232RL_PID  0xFBFA  /* Product ID for FT232RL */
 
 
@@ -38,6 +38,8 @@
 /* www.candapter.com Ewert Energy Systems CANdapter device */
 #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
 
+#define FTDI_NXTCAM_PID		0xABB8 /* NXTCam for Mindstorms NXT */
+
 /* OOCDlink by Joern Kaipf <joernk@web.de>
  * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
 #define FTDI_OOCDLINK_PID	0xbaf8	/* Amontec JTAGkey */
@@ -47,7 +49,7 @@
 #define LMI_LM3S_DEVEL_BOARD_PID	0xbcd8
 #define LMI_LM3S_EVAL_BOARD_PID		0xbcd9
 
-#define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
+#define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */
 
 /* OpenDCC (www.opendcc.de) product id */
 #define FTDI_OPENDCC_PID	0xBFD8
@@ -161,22 +163,37 @@
 /*
  * ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
  * All of these devices use FTDI's vendor ID (0x0403).
+ * Further IDs taken from ELV Windows .inf file.
  *
  * The previously included PID for the UO 100 module was incorrect.
  * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
  *
  * Armin Laeuger originally sent the PID for the UM 100 module.
  */
+#define FTDI_ELV_USR_PID	0xE000	/* ELV Universal-Sound-Recorder */
+#define FTDI_ELV_MSM1_PID	0xE001	/* ELV Mini-Sound-Modul */
+#define FTDI_ELV_KL100_PID	0xE002	/* ELV Kfz-Leistungsmesser KL 100 */
+#define FTDI_ELV_WS550_PID	0xE004	/* WS 550 */
+#define FTDI_ELV_EC3000_PID	0xE006	/* ENERGY CONTROL 3000 USB */
+#define FTDI_ELV_WS888_PID	0xE008	/* WS 888 */
+#define FTDI_ELV_TWS550_PID	0xE009	/* Technoline WS 550 */
+#define FTDI_ELV_FEM_PID	0xE00A	/* Funk Energie Monitor */
 #define FTDI_ELV_FHZ1300PC_PID	0xE0E8	/* FHZ 1300 PC */
 #define FTDI_ELV_WS500_PID	0xE0E9	/* PC-Wetterstation (WS 500) */
 #define FTDI_ELV_HS485_PID	0xE0EA	/* USB to RS-485 adapter */
-#define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Engery monitor EM 1010 PC */
+#define FTDI_ELV_UMS100_PID	0xE0EB	/* ELV USB Master-Slave Schaltsteckdose UMS 100 */
+#define FTDI_ELV_TFD128_PID	0xE0EC	/* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
+#define FTDI_ELV_FM3RX_PID	0xE0ED	/* ELV Messwertuebertragung FM3 RX */
+#define FTDI_ELV_WS777_PID	0xE0EE	/* Conrad WS 777 */
+#define FTDI_ELV_EM1010PC_PID	0xE0EF	/* Energy monitor EM 1010 PC */
 #define FTDI_ELV_CSI8_PID	0xE0F0	/* Computer-Schalt-Interface (CSI 8) */
 #define FTDI_ELV_EM1000DL_PID	0xE0F1	/* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
 #define FTDI_ELV_PCK100_PID	0xE0F2	/* PC-Kabeltester (PCK 100) */
 #define FTDI_ELV_RFP500_PID	0xE0F3	/* HF-Leistungsmesser (RFP 500) */
 #define FTDI_ELV_FS20SIG_PID	0xE0F4	/* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_UTP8_PID	0xE0F5	/* ELV UTP 8 */
 #define FTDI_ELV_WS300PC_PID	0xE0F6	/* PC-Wetterstation (WS 300 PC) */
+#define FTDI_ELV_WS444PC_PID	0xE0F7	/* Conrad WS 444 PC */
 #define FTDI_PHI_FISCO_PID      0xE40B  /* PHI Fisco USB to Serial cable */
 #define FTDI_ELV_UAD8_PID	0xF068	/* USB-AD-Wandler (UAD 8) */
 #define FTDI_ELV_UDA7_PID	0xF069	/* USB-DA-Wandler (UDA 7) */
@@ -195,8 +212,8 @@
  * drivers, or possibly the Comedi drivers in some cases. */
 #define FTDI_ELV_CLI7000_PID	0xFB59	/* Computer-Light-Interface (CLI 7000) */
 #define FTDI_ELV_PPS7330_PID	0xFB5C	/* Processor-Power-Supply (PPS 7330) */
-#define FTDI_ELV_TFM100_PID	0xFB5D	/* Temperartur-Feuchte Messgeraet (TFM 100) */
-#define FTDI_ELV_UDF77_PID	0xFB5E	/* USB DCF Funkurh (UDF 77) */
+#define FTDI_ELV_TFM100_PID	0xFB5D	/* Temperatur-Feuchte-Messgeraet (TFM 100) */
+#define FTDI_ELV_UDF77_PID	0xFB5E	/* USB DCF Funkuhr (UDF 77) */
 #define FTDI_ELV_UIO88_PID	0xFB5F	/* USB-I/O Interface (UIO 88) */
 
 /*
@@ -303,7 +320,7 @@
 
 /*
  * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
- * USB-TTY activ, USB-TTY passiv.  Some PIDs are used by several devices
+ * USB-TTY aktiv, USB-TTY passiv.  Some PIDs are used by several devices
  * and I'm not entirely sure which are used by which.
  */
 #define FTDI_4N_GALAXY_DE_1_PID	0xF3C0
@@ -313,10 +330,10 @@
  * Linx Technologies product ids
  */
 #define LINX_SDMUSBQSS_PID	0xF448	/* Linx SDM-USB-QS-S */
-#define LINX_MASTERDEVEL2_PID   0xF449   /* Linx Master Development 2.0 */
-#define LINX_FUTURE_0_PID   0xF44A   /* Linx future device */
-#define LINX_FUTURE_1_PID   0xF44B   /* Linx future device */
-#define LINX_FUTURE_2_PID   0xF44C   /* Linx future device */
+#define LINX_MASTERDEVEL2_PID   0xF449	/* Linx Master Development 2.0 */
+#define LINX_FUTURE_0_PID   0xF44A	/* Linx future device */
+#define LINX_FUTURE_1_PID   0xF44B	/* Linx future device */
+#define LINX_FUTURE_2_PID   0xF44C	/* Linx future device */
 
 /*
  * Oceanic product ids
@@ -477,6 +494,13 @@
 #define RATOC_PRODUCT_ID_USB60F	0xb020
 
 /*
+ * Contec products (http://www.contec.com)
+ * Submitted by Daniel Sangorrin
+ */
+#define CONTEC_VID		0x06CE	/* Vendor ID */
+#define CONTEC_COM1USBH_PID	0x8311	/* COM-1(USB)H */
+
+/*
  * Definitions for B&B Electronics products.
  */
 #define BANDB_VID		0x0856	/* B&B Electronics Vendor ID */
@@ -625,7 +649,7 @@
 #define FALCOM_TWIST_PID	0x0001	/* Falcom Twist USB GPRS modem */
 #define FALCOM_SAMBA_PID	0x0005	/* Falcom Samba USB GPRS modem */
 
-/* Larsen and Brusgaard AltiTrack/USBtrack  */
+/* Larsen and Brusgaard AltiTrack/USBtrack */
 #define LARSENBRUSGAARD_VID		0x0FD8
 #define LB_ALTITRACK_PID		0x0001
 
@@ -954,7 +978,7 @@
 #define ALTI2_N3_PID	0x6001	/* Neptune 3 */
 
 /*
- * Dresden Elektronic Sensor Terminal Board
+ * Dresden Elektronik Sensor Terminal Board
  */
 #define DE_VID			0x1cf1 /* Vendor ID */
 #define STB_PID			0x0001 /* Sensor Terminal Board */
@@ -968,6 +992,7 @@
 #define PAPOUCH_VID			0x5050	/* Vendor ID */
 #define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
 #define PAPOUCH_QUIDO4x4_PID		0x0900	/* Quido 4/4 Module */
+#define PAPOUCH_AD4USB_PID		0x8003	/* AD4USB Measurement Module */
 
 /*
  * Marvell SheevaPlug
@@ -984,3 +1009,11 @@
 #define EVO_8U232AM_PID	0x02FF	/* Evolution robotics RCM2 (FT232AM)*/
 #define EVO_HYBRID_PID		0x0302	/* Evolution robotics RCM4 PID (FT232BM)*/
 #define EVO_RCM4_PID		0x0303	/* Evolution robotics RCM4 PID */
+
+/*
+ * MJS Gadgets HD Radio / XM Radio / Sirius Radio interfaces (using VID 0x0403)
+ */
+#define MJSG_GENERIC_PID	0x9378
+#define MJSG_SR_RADIO_PID	0x9379
+#define MJSG_XM_RADIO_PID	0x937A
+#define MJSG_HD_RADIO_PID	0x937C
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
index d30f736d2cc..e21ce9ddfc6 100644
--- a/drivers/usb/serial/funsoft.c
+++ b/drivers/usb/serial/funsoft.c
@@ -18,7 +18,7 @@
 
 static int debug;
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1404, 0xcddc) },
 	{ },
 };
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 5ac900e5a50..a42b29a695b 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -210,7 +210,7 @@ static unsigned char const PRIVATE_REQ[]
 
 
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	/* the same device id seems to be used by all
 	   usb enabled GPS devices */
 	{ USB_DEVICE(GARMIN_VENDOR_ID, 3) },
@@ -271,7 +271,6 @@ static void send_to_tty(struct usb_serial_port *port,
 		usb_serial_debug_data(debug, &port->dev,
 					__func__, actual_length, data);
 
-		tty_buffer_request_room(tty, actual_length);
 		tty_insert_flip_string(tty, data, actual_length);
 		tty_flip_buffer_push(tty);
 	}
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 83443d6306d..89fac36684c 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -20,6 +20,7 @@
 #include <linux/usb/serial.h>
 #include <linux/uaccess.h>
 #include <linux/kfifo.h>
+#include <linux/serial.h>
 
 static int debug;
 
@@ -41,7 +42,7 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
 
 /* we want to look at all devices, as the vendor/product id can change
  * depending on the command line argument */
-static struct usb_device_id generic_serial_ids[] = {
+static const struct usb_device_id generic_serial_ids[] = {
 	{.driver_info = 42},
 	{}
 };
@@ -194,7 +195,7 @@ static int usb_serial_multi_urb_write(struct tty_struct *tty,
 		if (port->urbs_in_flight >
 		    port->serial->type->max_in_flight_urbs) {
 			spin_unlock_irqrestore(&port->lock, flags);
-			dbg("%s - write limit hit\n", __func__);
+			dbg("%s - write limit hit", __func__);
 			return bwrite;
 		}
 		port->tx_bytes_flight += towrite;
@@ -585,7 +586,7 @@ int usb_serial_generic_resume(struct usb_serial *serial)
 
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
-		if (!port->port.count)
+		if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags))
 			continue;
 
 		if (port->read_urb) {
diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index 43132927513..809379159b0 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -29,7 +29,7 @@
 #define HP_VENDOR_ID 0x03f0
 #define HP49GP_PRODUCT_ID 0x0121
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(HP_VENDOR_ID, HP49GP_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index b97960ac92f..3ef8df0ef88 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -364,42 +364,6 @@ static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial)
 	release_firmware(fw);
 }
 
-
-/************************************************************************
- *									*
- *  Get string descriptor from device					*
- *									*
- ************************************************************************/
-static int get_string(struct usb_device *dev, int Id, char *string, int buflen)
-{
-	struct usb_string_descriptor StringDesc;
-	struct usb_string_descriptor *pStringDesc;
-
-	dbg("%s - USB String ID = %d", __func__, Id);
-
-	if (!usb_get_descriptor(dev, USB_DT_STRING, Id,
-					&StringDesc, sizeof(StringDesc)))
-		return 0;
-
-	pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL);
-	if (!pStringDesc)
-		return 0;
-
-	if (!usb_get_descriptor(dev, USB_DT_STRING, Id,
-					pStringDesc, StringDesc.bLength)) {
-		kfree(pStringDesc);
-		return 0;
-	}
-
-	unicode_to_ascii(string, buflen,
-				pStringDesc->wData, pStringDesc->bLength/2);
-
-	kfree(pStringDesc);
-	dbg("%s - USB String %s", __func__, string);
-	return strlen(string);
-}
-
-
 #if 0
 /************************************************************************
  *
@@ -2007,7 +1971,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 			return;
 
 		case IOSP_EXT_STATUS_RX_CHECK_RSP:
-			dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __func__, edge_serial->rxPort, byte3);
+			dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============", __func__, edge_serial->rxPort, byte3);
 			/* Port->RxCheckRsp = true; */
 			return;
 		}
@@ -2075,7 +2039,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 		break;
 
 	default:
-		dbg("%s - Unrecognized IOSP status code %u\n", __func__, code);
+		dbg("%s - Unrecognized IOSP status code %u", __func__, code);
 		break;
 	}
 	return;
@@ -2091,18 +2055,13 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
 {
 	int cnt;
 
-	do {
-		cnt = tty_buffer_request_room(tty, length);
-		if (cnt < length) {
-			dev_err(dev, "%s - dropping data, %d bytes lost\n",
-					__func__, length - cnt);
-			if (cnt == 0)
-				break;
-		}
-		tty_insert_flip_string(tty, data, cnt);
-		data += cnt;
-		length -= cnt;
-	} while (length > 0);
+	cnt = tty_insert_flip_string(tty, data, length);
+	if (cnt < length) {
+		dev_err(dev, "%s - dropping data, %d bytes lost\n",
+				__func__, length - cnt);
+	}
+	data += cnt;
+	length -= cnt;
 
 	tty_flip_buffer_push(tty);
 }
@@ -2530,7 +2489,7 @@ static int calc_baud_rate_divisor(int baudrate, int *divisor)
 
 		*divisor = custom;
 
-		dbg("%s - Baud %d = %d\n", __func__, baudrate, custom);
+		dbg("%s - Baud %d = %d", __func__, baudrate, custom);
 		return 0;
 	}
 
@@ -2915,7 +2874,7 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
 			break;
 
 		case EDGE_DOWNLOAD_FILE_NONE:
-			dbg     ("No download file specified, skipping download\n");
+			dbg("No download file specified, skipping download");
 			return;
 
 		default:
@@ -2997,10 +2956,12 @@ static int edge_startup(struct usb_serial *serial)
 	usb_set_serial_data(serial, edge_serial);
 
 	/* get the name for the device from the device */
-	i = get_string(dev, dev->descriptor.iManufacturer,
+	i = usb_string(dev, dev->descriptor.iManufacturer,
 	    &edge_serial->name[0], MAX_NAME_LEN+1);
+	if (i < 0)
+		i = 0;
 	edge_serial->name[i++] = ' ';
-	get_string(dev, dev->descriptor.iProduct,
+	usb_string(dev, dev->descriptor.iProduct,
 	    &edge_serial->name[i], MAX_NAME_LEN+2 - i);
 
 	dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name);
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index 9241d314751..feb56a4ca79 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -14,7 +14,7 @@
 #ifndef IO_TABLES_H
 #define IO_TABLES_H
 
-static struct usb_device_id edgeport_2port_id_table [] = {
+static const struct usb_device_id edgeport_2port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2I) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) },
@@ -23,7 +23,7 @@ static struct usb_device_id edgeport_2port_id_table [] = {
 	{ }
 };
 
-static struct usb_device_id edgeport_4port_id_table [] = {
+static const struct usb_device_id edgeport_4port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) },
@@ -37,7 +37,7 @@ static struct usb_device_id edgeport_4port_id_table [] = {
 	{ }
 };
 
-static struct usb_device_id edgeport_8port_id_table [] = {
+static const struct usb_device_id edgeport_8port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) },
@@ -47,7 +47,7 @@ static struct usb_device_id edgeport_8port_id_table [] = {
 	{ }
 };
 
-static struct usb_device_id Epic_port_id_table [] = {
+static const struct usb_device_id Epic_port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) },
 	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) },
 	{ USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) },
@@ -60,7 +60,7 @@ static struct usb_device_id Epic_port_id_table [] = {
 };
 
 /* Devices that this driver supports */
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_4) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_RAPIDPORT_4) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION,	ION_DEVICE_ID_EDGEPORT_4T) },
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index d4cc0f7af40..aa876f71f22 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -134,7 +134,7 @@ struct edgeport_serial {
 
 
 /* Devices that this driver supports */
-static struct usb_device_id edgeport_1port_id_table [] = {
+static const struct usb_device_id edgeport_1port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) },
@@ -154,7 +154,7 @@ static struct usb_device_id edgeport_1port_id_table [] = {
 	{ }
 };
 
-static struct usb_device_id edgeport_2port_id_table [] = {
+static const struct usb_device_id edgeport_2port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) },
@@ -177,7 +177,7 @@ static struct usb_device_id edgeport_2port_id_table [] = {
 };
 
 /* Devices that this driver supports */
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) },
 	{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) },
@@ -413,11 +413,18 @@ static int write_boot_mem(struct edgeport_serial *serial,
 {
 	int status = 0;
 	int i;
-	__u8 temp;
+	u8 *temp;
 
 	/* Must do a read before write */
 	if (!serial->TiReadI2C) {
-		status = read_boot_mem(serial, 0, 1, &temp);
+		temp = kmalloc(1, GFP_KERNEL);
+		if (!temp) {
+			dev_err(&serial->serial->dev->dev,
+					"%s - out of memory\n", __func__);
+			return -ENOMEM;
+		}
+		status = read_boot_mem(serial, 0, 1, temp);
+		kfree(temp);
 		if (status)
 			return status;
 	}
@@ -935,37 +942,47 @@ static int build_i2c_fw_hdr(__u8 *header, struct device *dev)
 static int i2c_type_bootmode(struct edgeport_serial *serial)
 {
 	int status;
-	__u8 data;
+	u8 *data;
+
+	data = kmalloc(1, GFP_KERNEL);
+	if (!data) {
+		dev_err(&serial->serial->dev->dev,
+				"%s - out of memory\n", __func__);
+		return -ENOMEM;
+	}
 
 	/* Try to read type 2 */
 	status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
-				DTK_ADDR_SPACE_I2C_TYPE_II, 0, &data, 0x01);
+				DTK_ADDR_SPACE_I2C_TYPE_II, 0, data, 0x01);
 	if (status)
 		dbg("%s - read 2 status error = %d", __func__, status);
 	else
-		dbg("%s - read 2 data = 0x%x", __func__, data);
-	if ((!status) && (data == UMP5152 || data == UMP3410)) {
+		dbg("%s - read 2 data = 0x%x", __func__, *data);
+	if ((!status) && (*data == UMP5152 || *data == UMP3410)) {
 		dbg("%s - ROM_TYPE_II", __func__);
 		serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
-		return 0;
+		goto out;
 	}
 
 	/* Try to read type 3 */
 	status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ,
-				DTK_ADDR_SPACE_I2C_TYPE_III, 0,	&data, 0x01);
+				DTK_ADDR_SPACE_I2C_TYPE_III, 0,	data, 0x01);
 	if (status)
 		dbg("%s - read 3 status error = %d", __func__, status);
 	else
-		dbg("%s - read 2 data = 0x%x", __func__, data);
-	if ((!status) && (data == UMP5152 || data == UMP3410)) {
+		dbg("%s - read 2 data = 0x%x", __func__, *data);
+	if ((!status) && (*data == UMP5152 || *data == UMP3410)) {
 		dbg("%s - ROM_TYPE_III", __func__);
 		serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III;
-		return 0;
+		goto out;
 	}
 
 	dbg("%s - Unknown", __func__);
 	serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II;
-	return -ENODEV;
+	status = -ENODEV;
+out:
+	kfree(data);
+	return status;
 }
 
 static int bulk_xfer(struct usb_serial *serial, void *buffer,
@@ -1113,7 +1130,7 @@ static int download_fw(struct edgeport_serial *serial)
 				I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc);
 		if (start_address != 0) {
 			struct ti_i2c_firmware_rec *firmware_version;
-			__u8 record;
+			u8 *record;
 
 			dbg("%s - Found Type FIRMWARE (Type 2) record",
 								__func__);
@@ -1165,6 +1182,15 @@ static int download_fw(struct edgeport_serial *serial)
 				    OperationalMajorVersion,
 				    OperationalMinorVersion);
 
+				record = kmalloc(1, GFP_KERNEL);
+				if (!record) {
+					dev_err(dev, "%s - out of memory.\n",
+							__func__);
+					kfree(firmware_version);
+					kfree(rom_desc);
+					kfree(ti_manuf_desc);
+					return -ENOMEM;
+				}
 				/* In order to update the I2C firmware we must
 				 * change the type 2 record to type 0xF2. This
 				 * will force the UMP to come up in Boot Mode.
@@ -1177,13 +1203,14 @@ static int download_fw(struct edgeport_serial *serial)
 				 * firmware will update the record type from
 				 * 0xf2 to 0x02.
 				 */
-				record = I2C_DESC_TYPE_FIRMWARE_BLANK;
+				*record = I2C_DESC_TYPE_FIRMWARE_BLANK;
 
 				/* Change the I2C Firmware record type to
 				   0xf2 to trigger an update */
 				status = write_rom(serial, start_address,
-						sizeof(record),	&record);
+						sizeof(*record), record);
 				if (status) {
+					kfree(record);
 					kfree(firmware_version);
 					kfree(rom_desc);
 					kfree(ti_manuf_desc);
@@ -1196,19 +1223,21 @@ static int download_fw(struct edgeport_serial *serial)
 				 */
 				status = read_rom(serial,
 							start_address,
-							sizeof(record),
-							&record);
+							sizeof(*record),
+							record);
 				if (status) {
+					kfree(record);
 					kfree(firmware_version);
 					kfree(rom_desc);
 					kfree(ti_manuf_desc);
 					return status;
 				}
 
-				if (record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
+				if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
 					dev_err(dev,
 						"%s - error resetting device\n",
 						__func__);
+					kfree(record);
 					kfree(firmware_version);
 					kfree(rom_desc);
 					kfree(ti_manuf_desc);
@@ -1226,6 +1255,7 @@ static int download_fw(struct edgeport_serial *serial)
 						__func__, status);
 
 				/* return an error on purpose. */
+				kfree(record);
 				kfree(firmware_version);
 				kfree(rom_desc);
 				kfree(ti_manuf_desc);
@@ -1686,7 +1716,7 @@ static void edge_interrupt_callback(struct urb *urb)
 	case TIUMP_INTERRUPT_CODE_MSR:	/* MSR */
 		/* Copy MSR from UMP */
 		msr = data[1];
-		dbg("%s - ===== Port %u MSR Status = %02x ======\n",
+		dbg("%s - ===== Port %u MSR Status = %02x ======",
 		     __func__, port_number, msr);
 		handle_new_msr(edge_port, msr);
 		break;
@@ -1790,7 +1820,6 @@ static void edge_tty_recv(struct device *dev, struct tty_struct *tty,
 {
 	int queued;
 
-	tty_buffer_request_room(tty, length);
 	queued = tty_insert_flip_string(tty, data, length);
 	if (queued < length)
 		dev_err(dev, "%s - dropping data, %d bytes lost\n",
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index d6231c38813..3fea9298eb1 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -747,7 +747,6 @@ static void ipaq_read_bulk_callback(struct urb *urb)
 
 	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
-		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 		bytes_in += urb->actual_length;
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 727d323f092..e1d07840cee 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -134,7 +134,7 @@ enum {
 
 #define IPW_WANTS_TO_SEND	0x30
 
-static struct usb_device_id usb_ipw_ids[] = {
+static const struct usb_device_id usb_ipw_ids[] = {
 	{ USB_DEVICE(IPW_VID, IPW_PID) },
 	{ },
 };
@@ -172,7 +172,6 @@ static void ipw_read_bulk_callback(struct urb *urb)
 
 	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
-		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 95d8d26b9a4..4a0f5197423 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -100,7 +100,7 @@ static u8 ir_baud;
 static u8 ir_xbof;
 static u8 ir_add_bof;
 
-static struct usb_device_id ir_id_table[] = {
+static const struct usb_device_id ir_id_table[] = {
 	{ USB_DEVICE(0x050f, 0x0180) },		/* KC Technology, KC-180 */
 	{ USB_DEVICE(0x08e9, 0x0100) },		/* XTNDAccess */
 	{ USB_DEVICE(0x09c4, 0x0011) },		/* ACTiSys ACT-IR2000U */
@@ -445,11 +445,6 @@ static void ir_read_bulk_callback(struct urb *urb)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (!port->port.count) {
-		dbg("%s - port closed.", __func__);
-		return;
-	}
-
 	switch (status) {
 	case 0: /* Successful */
 		/*
@@ -462,10 +457,8 @@ static void ir_read_bulk_callback(struct urb *urb)
 		usb_serial_debug_data(debug, &port->dev, __func__,
 						urb->actual_length, data);
 		tty = tty_port_tty_get(&port->port);
-		if (tty_buffer_request_room(tty, urb->actual_length - 1)) {
-			tty_insert_flip_string(tty, data+1, urb->actual_length - 1);
-			tty_flip_buffer_push(tty);
-		}
+		tty_insert_flip_string(tty, data+1, urb->actual_length - 1);
+		tty_flip_buffer_push(tty);
 		tty_kref_put(tty);
 
 		/*
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index e6e02b178d2..43f13cf2f01 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -43,7 +43,7 @@ static int debug;
 #define DRIVER_VERSION "v0.11"
 #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver"
 
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(IUU_USB_VENDOR_ID, IUU_USB_PRODUCT_ID)},
 	{}			/* Terminating entry */
 };
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index f8c4b07033f..297163c3c61 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -464,13 +464,9 @@ static void	usa26_indat_callback(struct urb *urb)
 
 	/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
-	if (port->port.count) {
-		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (err != 0)
-			dbg("%s - resubmit read urb failed. (%d)",
-					__func__, err);
-	}
-	return;
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
 }
 
 /* Outdat handling is common for all devices */
@@ -483,8 +479,7 @@ static void	usa2x_outdat_callback(struct urb *urb)
 	p_priv = usb_get_serial_port_data(port);
 	dbg("%s - urb %d", __func__, urb == p_priv->out_urbs[1]);
 
-	if (port->port.count)
-		usb_serial_port_softint(port);
+	usb_serial_port_softint(port);
 }
 
 static void	usa26_inack_callback(struct urb *urb)
@@ -615,12 +610,10 @@ static void usa28_indat_callback(struct urb *urb)
 
 		/* Resubmit urb so we continue receiving */
 		urb->dev = port->serial->dev;
-		if (port->port.count) {
-			err = usb_submit_urb(urb, GFP_ATOMIC);
-			if (err != 0)
-				dbg("%s - resubmit read urb failed. (%d)",
-								__func__, err);
-		}
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err != 0)
+			dbg("%s - resubmit read urb failed. (%d)",
+							__func__, err);
 		p_priv->in_flip ^= 1;
 
 		urb = p_priv->in_urbs[p_priv->in_flip];
@@ -856,12 +849,9 @@ static void	usa49_indat_callback(struct urb *urb)
 
 	/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
-	if (port->port.count) {
-		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (err != 0)
-			dbg("%s - resubmit read urb failed. (%d)",
-							__func__, err);
-	}
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
 }
 
 static void usa49wg_indat_callback(struct urb *urb)
@@ -904,11 +894,7 @@ static void usa49wg_indat_callback(struct urb *urb)
 				/* no error on any byte */
 				i++;
 				for (x = 1; x < len ; ++x)
-					if (port->port.count)
-						tty_insert_flip_char(tty,
-								data[i++], 0);
-					else
-						i++;
+					tty_insert_flip_char(tty, data[i++], 0);
 			} else {
 				/*
 				 * some bytes had errors, every byte has status
@@ -922,14 +908,12 @@ static void usa49wg_indat_callback(struct urb *urb)
 					if (stat & RXERROR_PARITY)
 						flag |= TTY_PARITY;
 					/* XXX should handle break (0x10) */
-					if (port->port.count)
-						tty_insert_flip_char(tty,
+					tty_insert_flip_char(tty,
 							data[i+1], flag);
 					i += 2;
 				}
 			}
-			if (port->port.count)
-				tty_flip_buffer_push(tty);
+			tty_flip_buffer_push(tty);
 			tty_kref_put(tty);
 		}
 	}
@@ -1013,13 +997,9 @@ static void usa90_indat_callback(struct urb *urb)
 
 	/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
-	if (port->port.count) {
-		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (err != 0)
-			dbg("%s - resubmit read urb failed. (%d)",
-							__func__, err);
-	}
-	return;
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err != 0)
+		dbg("%s - resubmit read urb failed. (%d)", __func__, err);
 }
 
 
@@ -2418,8 +2398,7 @@ static int keyspan_usa90_send_setup(struct usb_serial *serial,
 		msg.portEnabled = 0;
 	/* Sending intermediate configs */
 	else {
-		if (port->port.count)
-			msg.portEnabled = 1;
+		msg.portEnabled = 1;
 		msg.txBreak = (p_priv->break_on);
 	}
 
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 30771e5b397..bf3297ddd18 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -456,7 +456,7 @@ static const struct keyspan_device_details *keyspan_devices[] = {
 	NULL,
 };
 
-static struct usb_device_id keyspan_ids_combined[] = {
+static const struct usb_device_id keyspan_ids_combined[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) },
@@ -497,7 +497,7 @@ static struct usb_driver keyspan_driver = {
 };
 
 /* usb_device_id table for the pre-firmware download keyspan devices */
-static struct usb_device_id keyspan_pre_ids[] = {
+static const struct usb_device_id keyspan_pre_ids[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) },
@@ -513,7 +513,7 @@ static struct usb_device_id keyspan_pre_ids[] = {
 	{ } /* Terminating entry */
 };
 
-static struct usb_device_id keyspan_1port_ids[] = {
+static const struct usb_device_id keyspan_1port_ids[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) },
@@ -524,7 +524,7 @@ static struct usb_device_id keyspan_1port_ids[] = {
 	{ } /* Terminating entry */
 };
 
-static struct usb_device_id keyspan_2port_ids[] = {
+static const struct usb_device_id keyspan_2port_ids[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
@@ -532,7 +532,7 @@ static struct usb_device_id keyspan_2port_ids[] = {
 	{ } /* Terminating entry */
 };
 
-static struct usb_device_id keyspan_4port_ids[] = {
+static const struct usb_device_id keyspan_4port_ids[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 1296a097f5c..185fe9a7d4e 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -125,7 +125,7 @@ struct keyspan_pda_private {
 #define ENTREGRA_VENDOR_ID		0x1645
 #define ENTREGRA_FAKE_ID		0x8093
 
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 #ifdef KEYSPAN
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
 #endif
@@ -147,20 +147,20 @@ static struct usb_driver keyspan_pda_driver = {
 	.no_dynamic_id = 	1,
 };
 
-static struct usb_device_id id_table_std [] = {
+static const struct usb_device_id id_table_std[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) },
 	{ }						/* Terminating entry */
 };
 
 #ifdef KEYSPAN
-static struct usb_device_id id_table_fake [] = {
+static const struct usb_device_id id_table_fake[] = {
 	{ USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) },
 	{ }						/* Terminating entry */
 };
 #endif
 
 #ifdef XIRCOM
-static struct usb_device_id id_table_fake_xircom [] = {
+static const struct usb_device_id id_table_fake_xircom[] = {
 	{ USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
 	{ USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
 	{ }
@@ -429,13 +429,20 @@ static int keyspan_pda_get_modem_info(struct usb_serial *serial,
 				      unsigned char *value)
 {
 	int rc;
-	unsigned char data;
+	u8 *data;
+
+	data = kmalloc(1, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 			     3, /* get pins */
 			     USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN,
-			     0, 0, &data, 1, 2000);
+			     0, 0, data, 1, 2000);
 	if (rc >= 0)
-		*value = data;
+		*value = *data;
+
+	kfree(data);
 	return rc;
 }
 
@@ -543,7 +550,14 @@ static int keyspan_pda_write(struct tty_struct *tty,
 	   device how much room it really has.  This is done only on
 	   scheduler time, since usb_control_msg() sleeps. */
 	if (count > priv->tx_room && !in_interrupt()) {
-		unsigned char room;
+		u8 *room;
+
+		room = kmalloc(1, GFP_KERNEL);
+		if (!room) {
+			rc = -ENOMEM;
+			goto exit;
+		}
+
 		rc = usb_control_msg(serial->dev,
 				     usb_rcvctrlpipe(serial->dev, 0),
 				     6, /* write_room */
@@ -551,9 +565,14 @@ static int keyspan_pda_write(struct tty_struct *tty,
 				     | USB_DIR_IN,
 				     0, /* value: 0 means "remaining room" */
 				     0, /* index */
-				     &room,
+				     room,
 				     1,
 				     2000);
+		if (rc > 0) {
+			dbg(" roomquery says %d", *room);
+			priv->tx_room = *room;
+		}
+		kfree(room);
 		if (rc < 0) {
 			dbg(" roomquery failed");
 			goto exit;
@@ -563,8 +582,6 @@ static int keyspan_pda_write(struct tty_struct *tty,
 			rc = -EIO; /* device didn't return any data */
 			goto exit;
 		}
-		dbg(" roomquery says %d", room);
-		priv->tx_room = room;
 	}
 	if (count > priv->tx_room) {
 		/* we're about to completely fill the Tx buffer, so
@@ -684,18 +701,22 @@ static int keyspan_pda_open(struct tty_struct *tty,
 					struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
-	unsigned char room;
+	u8 *room;
 	int rc = 0;
 	struct keyspan_pda_private *priv;
 
 	/* find out how much room is in the Tx ring */
+	room = kmalloc(1, GFP_KERNEL);
+	if (!room)
+		return -ENOMEM;
+
 	rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 			     6, /* write_room */
 			     USB_TYPE_VENDOR | USB_RECIP_INTERFACE
 			     | USB_DIR_IN,
 			     0, /* value */
 			     0, /* index */
-			     &room,
+			     room,
 			     1,
 			     2000);
 	if (rc < 0) {
@@ -708,8 +729,8 @@ static int keyspan_pda_open(struct tty_struct *tty,
 		goto error;
 	}
 	priv = usb_get_serial_port_data(port);
-	priv->tx_room = room;
-	priv->tx_throttled = room ? 0 : 1;
+	priv->tx_room = *room;
+	priv->tx_throttled = *room ? 0 : 1;
 
 	/*Start reading from the device*/
 	port->interrupt_in_urb->dev = serial->dev;
@@ -718,8 +739,8 @@ static int keyspan_pda_open(struct tty_struct *tty,
 		dbg("%s - usb_submit_urb(read int) failed", __func__);
 		goto error;
 	}
-
 error:
+	kfree(room);
 	return rc;
 }
 static void keyspan_pda_close(struct usb_serial_port *port)
@@ -789,6 +810,13 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial)
 	return 1;
 }
 
+#ifdef KEYSPAN
+MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw");
+#endif
+#ifdef XIRCOM
+MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw");
+#endif
+
 static int keyspan_pda_startup(struct usb_serial *serial)
 {
 
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 3a7873806f4..8eef91ba4b1 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -94,7 +94,7 @@ static int  klsi_105_tiocmset(struct tty_struct *tty, struct file *file,
 /*
  * All of the device info needed for the KLSI converters.
  */
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) },
 	{ USB_DEVICE(KLSI_VID, KLSI_KL5KUSB105D_PID) },
 	{ }		/* Terminating entry */
@@ -212,10 +212,19 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 				   unsigned long *line_state_p)
 {
 	int rc;
-	__u8 status_buf[KLSI_STATUSBUF_LEN] = { -1, -1};
+	u8 *status_buf;
 	__u16 status;
 
 	dev_info(&port->serial->dev->dev, "sending SIO Poll request\n");
+
+	status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL);
+	if (!status_buf) {
+		dev_err(&port->dev, "%s - out of memory for status buffer.\n",
+				__func__);
+		return -ENOMEM;
+	}
+	status_buf[0] = 0xff;
+	status_buf[1] = 0xff;
 	rc = usb_control_msg(port->serial->dev,
 			     usb_rcvctrlpipe(port->serial->dev, 0),
 			     KL5KUSB105A_SIO_POLL,
@@ -236,6 +245,8 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 
 		*line_state_p = klsi_105_status2linestate(status);
 	}
+
+	kfree(status_buf);
 	return rc;
 }
 
@@ -364,7 +375,7 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	int rc;
 	int i;
 	unsigned long line_state;
-	struct klsi_105_port_settings cfg;
+	struct klsi_105_port_settings *cfg;
 	unsigned long flags;
 
 	dbg("%s port %d", __func__, port->number);
@@ -376,12 +387,18 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	 * Then read the modem line control and store values in
 	 * priv->line_state.
 	 */
-	cfg.pktlen   = 5;
-	cfg.baudrate = kl5kusb105a_sio_b9600;
-	cfg.databits = kl5kusb105a_dtb_8;
-	cfg.unknown1 = 0;
-	cfg.unknown2 = 1;
-	klsi_105_chg_port_settings(port, &cfg);
+	cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
+	if (!cfg) {
+		dev_err(&port->dev, "%s - out of memory for config buffer.\n",
+				__func__);
+		return -ENOMEM;
+	}
+	cfg->pktlen   = 5;
+	cfg->baudrate = kl5kusb105a_sio_b9600;
+	cfg->databits = kl5kusb105a_dtb_8;
+	cfg->unknown1 = 0;
+	cfg->unknown2 = 1;
+	klsi_105_chg_port_settings(port, cfg);
 
 	/* set up termios structure */
 	spin_lock_irqsave(&priv->lock, flags);
@@ -391,11 +408,11 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 	priv->termios.c_lflag = tty->termios->c_lflag;
 	for (i = 0; i < NCCS; i++)
 		priv->termios.c_cc[i] = tty->termios->c_cc[i];
-	priv->cfg.pktlen   = cfg.pktlen;
-	priv->cfg.baudrate = cfg.baudrate;
-	priv->cfg.databits = cfg.databits;
-	priv->cfg.unknown1 = cfg.unknown1;
-	priv->cfg.unknown2 = cfg.unknown2;
+	priv->cfg.pktlen   = cfg->pktlen;
+	priv->cfg.baudrate = cfg->baudrate;
+	priv->cfg.databits = cfg->databits;
+	priv->cfg.unknown1 = cfg->unknown1;
+	priv->cfg.unknown2 = cfg->unknown2;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* READ_ON and urb submission */
@@ -441,6 +458,7 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 		retval = rc;
 
 exit:
+	kfree(cfg);
 	return retval;
 } /* klsi_105_open */
 
@@ -681,7 +699,6 @@ static void klsi_105_read_bulk_callback(struct urb *urb)
 			bytes_sent = urb->actual_length - 2;
 		}
 
-		tty_buffer_request_room(tty, bytes_sent);
 		tty_insert_flip_string(tty, data + 2, bytes_sent);
 		tty_flip_buffer_push(tty);
 		tty_kref_put(tty);
@@ -714,10 +731,17 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 	unsigned int old_iflag = old_termios->c_iflag;
 	unsigned int cflag = tty->termios->c_cflag;
 	unsigned int old_cflag = old_termios->c_cflag;
-	struct klsi_105_port_settings cfg;
+	struct klsi_105_port_settings *cfg;
 	unsigned long flags;
 	speed_t baud;
 
+	cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
+	if (!cfg) {
+		dev_err(&port->dev, "%s - out of memory for config buffer.\n",
+				__func__);
+		return;
+	}
+
 	/* lock while we are modifying the settings */
 	spin_lock_irqsave(&priv->lock, flags);
 
@@ -793,11 +817,11 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 		case CS5:
 			dbg("%s - 5 bits/byte not supported", __func__);
 			spin_unlock_irqrestore(&priv->lock, flags);
-			return ;
+			goto err;
 		case CS6:
 			dbg("%s - 6 bits/byte not supported", __func__);
 			spin_unlock_irqrestore(&priv->lock, flags);
-			return ;
+			goto err;
 		case CS7:
 			priv->cfg.databits = kl5kusb105a_dtb_7;
 			break;
@@ -856,11 +880,13 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 #endif
 		;
 	}
-	memcpy(&cfg, &priv->cfg, sizeof(cfg));
+	memcpy(cfg, &priv->cfg, sizeof(*cfg));
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* now commit changes to device */
-	klsi_105_chg_port_settings(port, &cfg);
+	klsi_105_chg_port_settings(port, cfg);
+err:
+	kfree(cfg);
 } /* klsi_105_set_termios */
 
 
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 45ea694b3ae..c113a2a0e10 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -86,7 +86,7 @@ static void kobil_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
 static void kobil_init_termios(struct tty_struct *tty);
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_B_PRODUCT_ID) },
 	{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_K_PRODUCT_ID) },
 	{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_USBTWIN_PRODUCT_ID) },
@@ -388,7 +388,6 @@ static void kobil_read_int_callback(struct urb *urb)
 		*/
 		/* END DEBUG */
 
-		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
@@ -624,7 +623,6 @@ static void kobil_set_termios(struct tty_struct *tty,
 	unsigned short urb_val = 0;
 	int c_cflag = tty->termios->c_cflag;
 	speed_t speed;
-	void *settings;
 
 	priv = usb_get_serial_port_data(port);
 	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
@@ -647,25 +645,13 @@ static void kobil_set_termios(struct tty_struct *tty,
 	}
 	urb_val |= (c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits :
 							SUSBCR_SPASB_1StopBit;
-
-	settings = kzalloc(50, GFP_KERNEL);
-	if (!settings)
-		return;
-
-	sprintf(settings, "%d ", speed);
-
 	if (c_cflag & PARENB) {
-		if  (c_cflag & PARODD) {
+		if  (c_cflag & PARODD)
 			urb_val |= SUSBCR_SPASB_OddParity;
-			strcat(settings, "Odd Parity");
-		} else {
+		else
 			urb_val |= SUSBCR_SPASB_EvenParity;
-			strcat(settings, "Even Parity");
-		}
-	} else {
+	} else
 		urb_val |= SUSBCR_SPASB_NoParity;
-		strcat(settings, "No Parity");
-	}
 	tty->termios->c_cflag &= ~CMSPAR;
 	tty_encode_baud_rate(tty, speed, speed);
 
@@ -675,11 +661,10 @@ static void kobil_set_termios(struct tty_struct *tty,
 		  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
 		  urb_val,
 		  0,
-		  settings,
+		  NULL,
 		  0,
 		  KOBIL_TIMEOUT
 		);
-	kfree(settings);
 }
 
 static int kobil_ioctl(struct tty_struct *tty, struct file *file,
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index cd009cb280a..2849f8c3201 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -75,6 +75,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/uaccess.h>
+#include <asm/unaligned.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include "mct_u232.h"
@@ -110,7 +111,7 @@ static void mct_u232_unthrottle(struct tty_struct *tty);
 /*
  * All of the device info needed for the MCT USB-RS232 converter.
  */
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(MCT_U232_VID, MCT_U232_PID) },
 	{ USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) },
 	{ USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) },
@@ -231,19 +232,22 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
 static int mct_u232_set_baud_rate(struct tty_struct *tty,
 	struct usb_serial *serial, struct usb_serial_port *port, speed_t value)
 {
-	__le32 divisor;
+	unsigned int divisor;
 	int rc;
-	unsigned char zero_byte = 0;
+	unsigned char *buf;
 	unsigned char cts_enable_byte = 0;
 	speed_t speed;
 
-	divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value,
-								&speed));
+	buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
 
+	divisor = mct_u232_calculate_baud_rate(serial, value, &speed);
+	put_unaligned_le32(cpu_to_le32(divisor), buf);
 	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				MCT_U232_SET_BAUD_RATE_REQUEST,
 				MCT_U232_SET_REQUEST_TYPE,
-				0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE,
+				0, 0, buf, MCT_U232_SET_BAUD_RATE_SIZE,
 				WDR_TIMEOUT);
 	if (rc < 0)	/*FIXME: What value speed results */
 		dev_err(&port->dev, "Set BAUD RATE %d failed (error = %d)\n",
@@ -269,10 +273,11 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
 	   a device which is not asserting 'CTS'.
 	*/
 
+	buf[0] = 0;
 	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				MCT_U232_SET_UNKNOWN1_REQUEST,
 				MCT_U232_SET_REQUEST_TYPE,
-				0, 0, &zero_byte, MCT_U232_SET_UNKNOWN1_SIZE,
+				0, 0, buf, MCT_U232_SET_UNKNOWN1_SIZE,
 				WDR_TIMEOUT);
 	if (rc < 0)
 		dev_err(&port->dev, "Sending USB device request code %d "
@@ -284,30 +289,40 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
 
 	dbg("set_baud_rate: send second control message, data = %02X",
 							cts_enable_byte);
+	buf[0] = cts_enable_byte;
 	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			MCT_U232_SET_CTS_REQUEST,
 			MCT_U232_SET_REQUEST_TYPE,
-			0, 0, &cts_enable_byte, MCT_U232_SET_CTS_SIZE,
+			0, 0, buf, MCT_U232_SET_CTS_SIZE,
 			WDR_TIMEOUT);
 	if (rc < 0)
 		dev_err(&port->dev, "Sending USB device request code %d "
 			"failed (error = %d)\n", MCT_U232_SET_CTS_REQUEST, rc);
 
+	kfree(buf);
 	return rc;
 } /* mct_u232_set_baud_rate */
 
 static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr)
 {
 	int rc;
+	unsigned char *buf;
+
+	buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
+
+	buf[0] = lcr;
 	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			MCT_U232_SET_LINE_CTRL_REQUEST,
 			MCT_U232_SET_REQUEST_TYPE,
-			0, 0, &lcr, MCT_U232_SET_LINE_CTRL_SIZE,
+			0, 0, buf, MCT_U232_SET_LINE_CTRL_SIZE,
 			WDR_TIMEOUT);
 	if (rc < 0)
 		dev_err(&serial->dev->dev,
 			"Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc);
 	dbg("set_line_ctrl: 0x%x", lcr);
+	kfree(buf);
 	return rc;
 } /* mct_u232_set_line_ctrl */
 
@@ -315,23 +330,31 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial,
 				   unsigned int control_state)
 {
 	int rc;
-	unsigned char mcr = MCT_U232_MCR_NONE;
+	unsigned char mcr;
+	unsigned char *buf;
+
+	buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
+	if (buf == NULL)
+		return -ENOMEM;
 
+	mcr = MCT_U232_MCR_NONE;
 	if (control_state & TIOCM_DTR)
 		mcr |= MCT_U232_MCR_DTR;
 	if (control_state & TIOCM_RTS)
 		mcr |= MCT_U232_MCR_RTS;
 
+	buf[0] = mcr;
 	rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			MCT_U232_SET_MODEM_CTRL_REQUEST,
 			MCT_U232_SET_REQUEST_TYPE,
-			0, 0, &mcr, MCT_U232_SET_MODEM_CTRL_SIZE,
+			0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE,
 			WDR_TIMEOUT);
 	if (rc < 0)
 		dev_err(&serial->dev->dev,
 			"Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
 	dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
 
+	kfree(buf);
 	return rc;
 } /* mct_u232_set_modem_ctrl */
 
@@ -339,17 +362,27 @@ static int mct_u232_get_modem_stat(struct usb_serial *serial,
 						unsigned char *msr)
 {
 	int rc;
+	unsigned char *buf;
+
+	buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL);
+	if (buf == NULL) {
+		*msr = 0;
+		return -ENOMEM;
+	}
 	rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 			MCT_U232_GET_MODEM_STAT_REQUEST,
 			MCT_U232_GET_REQUEST_TYPE,
-			0, 0, msr, MCT_U232_GET_MODEM_STAT_SIZE,
+			0, 0, buf, MCT_U232_GET_MODEM_STAT_SIZE,
 			WDR_TIMEOUT);
 	if (rc < 0) {
 		dev_err(&serial->dev->dev,
 			"Get MODEM STATus failed (error = %d)\n", rc);
 		*msr = 0;
+	} else {
+		*msr = buf[0];
 	}
 	dbg("get_modem_stat: 0x%x", *msr);
+	kfree(buf);
 	return rc;
 } /* mct_u232_get_modem_stat */
 
diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h
index 07b6bec31dc..7417d5ce1e2 100644
--- a/drivers/usb/serial/mct_u232.h
+++ b/drivers/usb/serial/mct_u232.h
@@ -73,6 +73,8 @@
 #define MCT_U232_SET_CTS_REQUEST   12
 #define MCT_U232_SET_CTS_SIZE       1
 
+#define MCT_U232_MAX_SIZE		4	/* of MCT_XXX_SIZE */
+
 /*
  * Baud rate (divisor)
  * Actually, there are two of them, MCT website calls them "Philips solution"
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 763e32a44be..0d47f2c4d59 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -81,12 +81,15 @@ struct moschip_serial {
 
 static int debug;
 
+static struct usb_serial_driver moschip7720_2port_driver;
+
 #define USB_VENDOR_ID_MOSCHIP		0x9710
 #define MOSCHIP_DEVICE_ID_7720		0x7720
 #define MOSCHIP_DEVICE_ID_7715		0x7715
 
-static struct usb_device_id moschip_port_id_table[] = {
+static const struct usb_device_id moschip_port_id_table[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) },
+	{ USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7715) },
 	{ } /* terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, moschip_port_id_table);
@@ -106,7 +109,7 @@ static void mos7720_interrupt_callback(struct urb *urb)
 	__u8 sp1;
 	__u8 sp2;
 
-	dbg("%s", " : Entering\n");
+	dbg(" : Entering");
 
 	switch (status) {
 	case 0:
@@ -186,6 +189,75 @@ exit:
 }
 
 /*
+ * mos7715_interrupt_callback
+ *	this is the 7715's callback function for when we have received data on
+ *	the interrupt endpoint.
+ */
+static void mos7715_interrupt_callback(struct urb *urb)
+{
+	int result;
+	int length;
+	int status = urb->status;
+	__u8 *data;
+	__u8 iir;
+
+	switch (status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d", __func__,
+		    status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d", __func__,
+		    status);
+		goto exit;
+	}
+
+	length = urb->actual_length;
+	data = urb->transfer_buffer;
+
+	/* Structure of data from 7715 device:
+	 * Byte 1: IIR serial Port
+	 * Byte 2: unused
+	 * Byte 2: DSR parallel port
+	 * Byte 4: FIFO status for both */
+
+	if (unlikely(length != 4)) {
+		dbg("Wrong data !!!");
+		return;
+	}
+
+	iir = data[0];
+	if (!(iir & 0x01)) {	/* serial port interrupt pending */
+		switch (iir & 0x0f) {
+		case SERIAL_IIR_RLS:
+			dbg("Serial Port: Receiver status error or address "
+			    "bit detected in 9-bit mode\n");
+			break;
+		case SERIAL_IIR_CTI:
+			dbg("Serial Port: Receiver time out");
+			break;
+		case SERIAL_IIR_MS:
+			dbg("Serial Port: Modem status change");
+			break;
+		}
+	}
+
+exit:
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result)
+		dev_err(&urb->dev->dev,
+			"%s - Error %d submitting control urb\n",
+			__func__, result);
+	return;
+}
+
+/*
  * mos7720_bulk_in_callback
  *	this is the callback function for when we have received data on the
  *	bulk in endpoint.
@@ -206,7 +278,7 @@ static void mos7720_bulk_in_callback(struct urb *urb)
 
 	mos7720_port = urb->context;
 	if (!mos7720_port) {
-		dbg("%s", "NULL mos7720_port pointer \n");
+		dbg("NULL mos7720_port pointer");
 		return ;
 	}
 
@@ -218,7 +290,6 @@ static void mos7720_bulk_in_callback(struct urb *urb)
 
 	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
-		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
@@ -275,17 +346,15 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
  *	this function will be used for sending command to device
  */
 static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
-			__u16 index, void *data)
+			__u16 index, u8 *data)
 {
 	int status;
-	unsigned int pipe;
+	u8 *buf;
 	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
-	__u8 requesttype;
-	__u16 size = 0x0000;
 
 	if (value < MOS_MAX_PORT) {
 		if (product == MOSCHIP_DEVICE_ID_7715)
-			value = value*0x100+0x100;
+			value = 0x0200; /* identifies the 7715's serial port */
 		else
 			value = value*0x100+0x200;
 	} else {
@@ -298,27 +367,58 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
 	}
 
 	if (request == MOS_WRITE) {
-		request = (__u8)MOS_WRITE;
-		requesttype = (__u8)0x40;
-		value  = value + (__u16)*((unsigned char *)data);
-		data = NULL;
-		pipe = usb_sndctrlpipe(serial->dev, 0);
+		value = value + *data;
+		status = usb_control_msg(serial->dev,
+				usb_sndctrlpipe(serial->dev, 0), MOS_WRITE,
+				0x40, value, index, NULL, 0, MOS_WDR_TIMEOUT);
 	} else {
-		request = (__u8)MOS_READ;
-		requesttype = (__u8)0xC0;
-		size = 0x01;
-		pipe = usb_rcvctrlpipe(serial->dev, 0);
+		buf = kmalloc(1, GFP_KERNEL);
+		if (!buf) {
+			status = -ENOMEM;
+			goto out;
+		}
+		status = usb_control_msg(serial->dev,
+				usb_rcvctrlpipe(serial->dev, 0), MOS_READ,
+				0xc0, value, index, buf, 1, MOS_WDR_TIMEOUT);
+		*data = *buf;
+		kfree(buf);
 	}
-
-	status = usb_control_msg(serial->dev, pipe, request, requesttype,
-				 value, index, data, size, MOS_WDR_TIMEOUT);
-
+out:
 	if (status < 0)
-		dbg("Command Write failed Value %x index %x\n", value, index);
+		dbg("Command Write failed Value %x index %x", value, index);
 
 	return status;
 }
 
+
+/*
+ * mos77xx_probe
+ *	this function installs the appropriate read interrupt endpoint callback
+ *	depending on whether the device is a 7720 or 7715, thus avoiding costly
+ *	run-time checks in the high-frequency callback routine itself.
+ */
+static int mos77xx_probe(struct usb_serial *serial,
+			 const struct usb_device_id *id)
+{
+	if (id->idProduct == MOSCHIP_DEVICE_ID_7715)
+		moschip7720_2port_driver.read_int_callback =
+			mos7715_interrupt_callback;
+	else
+		moschip7720_2port_driver.read_int_callback =
+			mos7720_interrupt_callback;
+
+	return 0;
+}
+
+static int mos77xx_calc_num_ports(struct usb_serial *serial)
+{
+	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
+	if (product == MOSCHIP_DEVICE_ID_7715)
+		return 1;
+
+	return 2;
+}
+
 static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
@@ -390,7 +490,7 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 	  */
 	port_number = port->number - port->serial->minor;
 	send_mos_cmd(port->serial, MOS_READ, port_number, UART_LSR, &data);
-	dbg("SS::%p LSR:%x\n", mos7720_port, data);
+	dbg("SS::%p LSR:%x", mos7720_port, data);
 
 	dbg("Check:Sending Command ..........");
 
@@ -729,7 +829,7 @@ static void mos7720_throttle(struct tty_struct *tty)
 	struct moschip_port *mos7720_port;
 	int status;
 
-	dbg("%s- port %d\n", __func__, port->number);
+	dbg("%s- port %d", __func__, port->number);
 
 	mos7720_port = usb_get_serial_port_data(port);
 
@@ -1208,7 +1308,7 @@ static void mos7720_set_termios(struct tty_struct *tty,
 		return;
 	}
 
-	dbg("%s\n", "setting termios - ASPIRE");
+	dbg("setting termios - ASPIRE");
 
 	cflag = tty->termios->c_cflag;
 
@@ -1226,7 +1326,7 @@ static void mos7720_set_termios(struct tty_struct *tty,
 	change_port_settings(tty, mos7720_port, old_termios);
 
 	if (!port->read_urb) {
-		dbg("%s", "URB KILLED !!!!!\n");
+		dbg("URB KILLED !!!!!");
 		return;
 	}
 
@@ -1495,6 +1595,7 @@ static int mos7720_startup(struct usb_serial *serial)
 	struct usb_device *dev;
 	int i;
 	char data;
+	u16 product = le16_to_cpu(serial->dev->descriptor.idProduct);
 
 	dbg("%s: Entering ..........", __func__);
 
@@ -1514,6 +1615,29 @@ static int mos7720_startup(struct usb_serial *serial)
 
 	usb_set_serial_data(serial, mos7720_serial);
 
+	/*
+	 * The 7715 uses the first bulk in/out endpoint pair for the parallel
+	 * port, and the second for the serial port.  Because the usbserial core
+	 * assumes both pairs are serial ports, we must engage in a bit of
+	 * subterfuge and swap the pointers for ports 0 and 1 in order to make
+	 * port 0 point to the serial port.  However, both moschip devices use a
+	 * single interrupt-in endpoint for both ports (as mentioned a little
+	 * further down), and this endpoint was assigned to port 0.  So after
+	 * the swap, we must copy the interrupt endpoint elements from port 1
+	 * (as newly assigned) to port 0, and null out port 1 pointers.
+	 */
+	if (product == MOSCHIP_DEVICE_ID_7715) {
+		struct usb_serial_port *tmp = serial->port[0];
+		serial->port[0] = serial->port[1];
+		serial->port[1] = tmp;
+		serial->port[0]->interrupt_in_urb = tmp->interrupt_in_urb;
+		serial->port[0]->interrupt_in_buffer = tmp->interrupt_in_buffer;
+		serial->port[0]->interrupt_in_endpointAddress =
+			tmp->interrupt_in_endpointAddress;
+		serial->port[1]->interrupt_in_urb = NULL;
+		serial->port[1]->interrupt_in_buffer = NULL;
+	}
+
 	/* we set up the pointers to the endpoints in the mos7720_open *
 	 * function, as the structures aren't created yet.             */
 
@@ -1529,7 +1653,7 @@ static int mos7720_startup(struct usb_serial *serial)
 
 		/* Initialize all port interrupt end point to port 0 int
 		 * endpoint.  Our device has only one interrupt endpoint
-		 * comman to all ports */
+		 * common to all ports */
 		serial->port[i]->interrupt_in_endpointAddress =
 				serial->port[0]->interrupt_in_endpointAddress;
 
@@ -1584,11 +1708,12 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.description		= "Moschip 2 port adapter",
 	.usb_driver		= &usb_driver,
 	.id_table		= moschip_port_id_table,
-	.num_ports		= 2,
+	.calc_num_ports		= mos77xx_calc_num_ports,
 	.open			= mos7720_open,
 	.close			= mos7720_close,
 	.throttle		= mos7720_throttle,
 	.unthrottle		= mos7720_unthrottle,
+	.probe			= mos77xx_probe,
 	.attach			= mos7720_startup,
 	.release		= mos7720_release,
 	.ioctl			= mos7720_ioctl,
@@ -1600,7 +1725,7 @@ static struct usb_serial_driver moschip7720_2port_driver = {
 	.chars_in_buffer	= mos7720_chars_in_buffer,
 	.break_ctl		= mos7720_break,
 	.read_bulk_callback	= mos7720_bulk_in_callback,
-	.read_int_callback	= mos7720_interrupt_callback,
+	.read_int_callback	= NULL  /* dynamically assigned in probe() */
 };
 
 static int __init moschip7720_init(void)
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2cfe2451ed9..2fda1c0182b 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -181,7 +181,7 @@
 #define URB_TRANSFER_BUFFER_SIZE        32	/* URB Size  */
 
 
-static struct usb_device_id moschip_port_id_table[] = {
+static const struct usb_device_id moschip_port_id_table[] = {
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
@@ -198,7 +198,7 @@ static struct usb_device_id moschip_port_id_table[] = {
 	{}			/* terminating entry */
 };
 
-static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
+static const struct usb_device_id moschip_id_table_combined[] __devinitconst = {
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
@@ -283,12 +283,19 @@ static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg,
 {
 	struct usb_device *dev = port->serial->dev;
 	int ret = 0;
+	u8 *buf;
+
+	buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
 
 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
-			      MCS_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
+			      MCS_RD_RTYPE, 0, reg, buf, VENDOR_READ_LENGTH,
 			      MOS_WDR_TIMEOUT);
+	*val = buf[0];
 	dbg("mos7840_get_reg_sync offset is %x, return val %x", reg, *val);
-	*val = (*val) & 0x00ff;
+
+	kfree(buf);
 	return ret;
 }
 
@@ -341,6 +348,11 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
 	struct usb_device *dev = port->serial->dev;
 	int ret = 0;
 	__u16 Wval;
+	u8 *buf;
+
+	buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
 
 	/* dbg("application number is %4x",
 	    (((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); */
@@ -364,9 +376,11 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
 		}
 	}
 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
-			      MCS_RD_RTYPE, Wval, reg, val, VENDOR_READ_LENGTH,
+			      MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH,
 			      MOS_WDR_TIMEOUT);
-	*val = (*val) & 0x00ff;
+	*val = buf[0];
+
+	kfree(buf);
 	return ret;
 }
 
@@ -750,7 +764,6 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 	if (urb->actual_length) {
 		tty = tty_port_tty_get(&mos7840_port->port->port);
 		if (tty) {
-			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
 			dbg(" %s ", data);
 			tty_flip_buffer_push(tty);
diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
index 99bd00f5188..cf1718394e1 100644
--- a/drivers/usb/serial/moto_modem.c
+++ b/drivers/usb/serial/moto_modem.c
@@ -21,7 +21,7 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x05c6, 0x3197) },	/* unknown Motorola phone */
 	{ USB_DEVICE(0x0c44, 0x0022) },	/* unknown Mororola phone */
 	{ USB_DEVICE(0x22b8, 0x2a64) },	/* Motorola KRZR K1m */
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index 5ceaa4c6be0..04a6cbbed2c 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -22,7 +22,7 @@
 
 static int debug;
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0a99, 0x0001) },	/* Talon Technology device */
 	{ },
 };
@@ -66,7 +66,6 @@ static void navman_read_int_callback(struct urb *urb)
 
 	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
-		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 062265038bf..89c724c0ac0 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -75,7 +75,7 @@ static void omninet_disconnect(struct usb_serial *serial);
 static void omninet_release(struct usb_serial *serial);
 static int omninet_attach(struct usb_serial *serial);
 
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
 	{ USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) },
 	{ }						/* Terminating entry */
@@ -218,8 +218,8 @@ static void omninet_read_bulk_callback(struct urb *urb)
 
 	if (debug && header->oh_xxx != 0x30) {
 		if (urb->actual_length) {
-			printk(KERN_DEBUG __FILE__
-					": omninet_read %d: ", header->oh_len);
+			printk(KERN_DEBUG "%s: omninet_read %d: ",
+			       __FILE__, header->oh_len);
 			for (i = 0; i < (header->oh_len +
 						OMNINET_HEADERLEN); i++)
 				printk("%.2x ", data[i]);
@@ -332,7 +332,7 @@ static void omninet_write_bulk_callback(struct urb *urb)
 	struct usb_serial_port 	*port   =  urb->context;
 	int status = urb->status;
 
-	dbg("%s - port %0x\n", __func__, port->number);
+	dbg("%s - port %0x", __func__, port->number);
 
 	port->write_urb_busy = 0;
 	if (status) {
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 4cdb975caa8..f37476e2268 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -22,7 +22,7 @@
 
 static int debug;
 
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x065a, 0x0009) },
 	{ },
 };
@@ -55,7 +55,6 @@ static void opticon_bulk_callback(struct urb *urb)
 	int status = urb->status;
 	struct tty_struct *tty;
 	int result;
-	int available_room = 0;
 	int data_length;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -96,13 +95,9 @@ static void opticon_bulk_callback(struct urb *urb)
 			/* real data, send it to the tty layer */
 			tty = tty_port_tty_get(&port->port);
 			if (tty) {
-				available_room = tty_buffer_request_room(tty,
-								data_length);
-				if (available_room) {
-					tty_insert_flip_string(tty, data,
-							       available_room);
-					tty_flip_buffer_push(tty);
-				}
+				tty_insert_flip_string(tty, data,
+							       data_length);
+				tty_flip_buffer_push(tty);
 				tty_kref_put(tty);
 			}
 		} else {
@@ -217,7 +212,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
 	spin_lock_irqsave(&priv->lock, flags);
 	if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
 		spin_unlock_irqrestore(&priv->lock, flags);
-		dbg("%s - write limit hit\n", __func__);
+		dbg("%s - write limit hit", __func__);
 		return 0;
 	}
 	priv->outstanding_urbs++;
@@ -288,7 +283,7 @@ static int opticon_write_room(struct tty_struct *tty)
 	spin_lock_irqsave(&priv->lock, flags);
 	if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
 		spin_unlock_irqrestore(&priv->lock, flags);
-		dbg("%s - write limit hit\n", __func__);
+		dbg("%s - write limit hit", __func__);
 		return 0;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 6e94a6711f0..847b805d63a 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -336,15 +336,42 @@ static int  option_resume(struct usb_serial *serial);
 #define AIRPLUS_VENDOR_ID			0x1011
 #define AIRPLUS_PRODUCT_MCD650			0x3198
 
+/* Longcheer/Longsung vendor ID; makes whitelabel devices that
+ * many other vendors like 4G Systems, Alcatel, ChinaBird,
+ * Mobidata, etc sell under their own brand names.
+ */
+#define LONGCHEER_VENDOR_ID			0x1c9e
+
 /* 4G Systems products */
-#define FOUR_G_SYSTEMS_VENDOR_ID		0x1c9e
+/* This is the 4G XS Stick W14 a.k.a. Mobilcom Debitel Surf-Stick *
+ * It seems to contain a Qualcomm QSC6240/6290 chipset            */
 #define FOUR_G_SYSTEMS_PRODUCT_W14		0x9603
 
 /* Haier products */
 #define HAIER_VENDOR_ID				0x201e
 #define HAIER_PRODUCT_CE100			0x2009
 
-static struct usb_device_id option_ids[] = {
+/* some devices interfaces need special handling due to a number of reasons */
+enum option_blacklist_reason {
+		OPTION_BLACKLIST_NONE = 0,
+		OPTION_BLACKLIST_SENDSETUP = 1,
+		OPTION_BLACKLIST_RESERVED_IF = 2
+};
+
+struct option_blacklist_info {
+	const u32 infolen;	/* number of interface numbers on blacklist */
+	const u8  *ifaceinfo;	/* pointer to the array holding the numbers */
+	enum option_blacklist_reason reason;
+};
+
+static const u8 four_g_w14_no_sendsetup[] = { 0, 1 };
+static const struct option_blacklist_info four_g_w14_blacklist = {
+	.infolen = ARRAY_SIZE(four_g_w14_no_sendsetup),
+	.ifaceinfo = four_g_w14_no_sendsetup,
+	.reason = OPTION_BLACKLIST_SENDSETUP
+};
+
+static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_LIGHT) },
@@ -644,7 +671,9 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
 	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
 	{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
-	{ USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) },
+	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
+  	  .driver_info = (kernel_ulong_t)&four_g_w14_blacklist
+  	},
 	{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
 	{ } /* Terminating entry */
 };
@@ -709,6 +738,7 @@ struct option_intf_private {
 	spinlock_t susp_lock;
 	unsigned int suspended:1;
 	int in_flight;
+	struct option_blacklist_info *blacklist_info;
 };
 
 struct option_port_private {
@@ -778,9 +808,27 @@ static int option_probe(struct usb_serial *serial,
 	if (!data)
 		return -ENOMEM;
 	spin_lock_init(&data->susp_lock);
+	data->blacklist_info = (struct option_blacklist_info*) id->driver_info;
 	return 0;
 }
 
+static enum option_blacklist_reason is_blacklisted(const u8 ifnum,
+				const struct option_blacklist_info *blacklist)
+{
+	const u8  *info;
+	int i;
+
+	if (blacklist) {
+		info = blacklist->ifaceinfo;
+
+		for (i = 0; i < blacklist->infolen; i++) {
+			if (info[i] == ifnum)
+				return blacklist->reason;
+		}
+	}
+	return OPTION_BLACKLIST_NONE;
+}
+
 static void option_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
@@ -921,7 +969,6 @@ static void option_indat_callback(struct urb *urb)
 	} else {
 		tty = tty_port_tty_get(&port->port);
 		if (urb->actual_length) {
-			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
 			tty_flip_buffer_push(tty);
 		} else 
@@ -929,9 +976,9 @@ static void option_indat_callback(struct urb *urb)
 		tty_kref_put(tty);
 
 		/* Resubmit urb so we continue receiving */
-		if (port->port.count && status != -ESHUTDOWN) {
+		if (status != -ESHUTDOWN) {
 			err = usb_submit_urb(urb, GFP_ATOMIC);
-			if (err)
+			if (err && err != -EPERM)
 				printk(KERN_ERR "%s: resubmit read urb failed. "
 					"(%d)", __func__, err);
 			else
@@ -985,7 +1032,7 @@ static void option_instat_callback(struct urb *urb)
 				(struct usb_ctrlrequest *)urb->transfer_buffer;
 
 		if (!req_pkt) {
-			dbg("%s: NULL req_pkt\n", __func__);
+			dbg("%s: NULL req_pkt", __func__);
 			return;
 		}
 		if ((req_pkt->bRequestType == 0xA1) &&
@@ -1211,11 +1258,19 @@ static void option_setup_urbs(struct usb_serial *serial)
 static int option_send_setup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
+	struct option_intf_private *intfdata =
+		(struct option_intf_private *) serial->private;
 	struct option_port_private *portdata;
 	int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
 	int val = 0;
 	dbg("%s", __func__);
 
+	if (is_blacklisted(ifNum, intfdata->blacklist_info) ==
+						OPTION_BLACKLIST_SENDSETUP) {
+		dbg("No send_setup on blacklisted interface #%d\n", ifNum);
+		return -EIO;
+	}
+
 	portdata = usb_get_serial_port_data(port);
 
 	if (portdata->dtr_state)
@@ -1401,7 +1456,7 @@ static int option_resume(struct usb_serial *serial)
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
 		if (!port->interrupt_in_urb) {
-			dbg("%s: No interrupt URB for port %d\n", __func__, i);
+			dbg("%s: No interrupt URB for port %d", __func__, i);
 			continue;
 		}
 		err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index c644e26394b..deeacdea05d 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -58,7 +58,7 @@
 #define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>"
 #define OTI6858_VERSION "0.1"
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) },
 	{ }
 };
@@ -302,7 +302,7 @@ void send_data(struct work_struct *work)
 	struct usb_serial_port *port = priv->port;
 	int count = 0, result;
 	unsigned long flags;
-	unsigned char allow;
+	u8 *allow;
 
 	dbg("%s(port = %d)", __func__, port->number);
 
@@ -321,13 +321,20 @@ void send_data(struct work_struct *work)
 		count = port->bulk_out_size;
 
 	if (count != 0) {
+		allow = kmalloc(1, GFP_KERNEL);
+		if (!allow) {
+			dev_err(&port->dev, "%s(): kmalloc failed\n",
+					__func__);
+			return;
+		}
 		result = usb_control_msg(port->serial->dev,
 				usb_rcvctrlpipe(port->serial->dev, 0),
 				OTI6858_REQ_T_CHECK_TXBUFF,
 				OTI6858_REQ_CHECK_TXBUFF,
-				count, 0, &allow, 1, 100);
-		if (result != 1 || allow != 0)
+				count, 0, allow, 1, 100);
+		if (result != 1 || *allow != 0)
 			count = 0;
+		kfree(allow);
 	}
 
 	if (count == 0) {
@@ -578,9 +585,6 @@ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
 	usb_clear_halt(serial->dev, port->write_urb->pipe);
 	usb_clear_halt(serial->dev, port->read_urb->pipe);
 
-	if (port->port.count != 1)
-		return 0;
-
 	buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL);
 	if (buf == NULL) {
 		dev_err(&port->dev, "%s(): out of memory!\n", __func__);
@@ -927,10 +931,6 @@ static void oti6858_read_bulk_callback(struct urb *urb)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	if (status != 0) {
-		if (!port->port.count) {
-			dbg("%s(): port is closed, exiting", __func__);
-			return;
-		}
 		/*
 		if (status == -EPROTO) {
 			* PL2303 mysteriously fails with -EPROTO reschedule
@@ -954,14 +954,12 @@ static void oti6858_read_bulk_callback(struct urb *urb)
 	}
 	tty_kref_put(tty);
 
-	/* schedule the interrupt urb if we are still open */
-	if (port->port.count != 0) {
-		port->interrupt_in_urb->dev = port->serial->dev;
-		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
-		if (result != 0) {
-			dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
-					" error %d\n", __func__, result);
-		}
+	/* schedule the interrupt urb */
+	port->interrupt_in_urb->dev = port->serial->dev;
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+	if (result != 0 && result != -EPERM) {
+		dev_err(&port->dev, "%s(): usb_submit_urb() failed,"
+				" error %d\n", __func__, result);
 	}
 }
 
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 9ec1a49e236..73d5f346d3e 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -50,7 +50,7 @@ struct pl2303_buf {
 	char		*buf_put;
 };
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
@@ -451,7 +451,6 @@ static void pl2303_send(struct usb_serial_port *port)
 			      port->write_urb->transfer_buffer);
 
 	port->write_urb->transfer_buffer_length = count;
-	port->write_urb->dev = port->serial->dev;
 	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting write urb,"
@@ -769,7 +768,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 		pl2303_set_termios(tty, port, &tmp_termios);
 
 	dbg("%s - submitting read urb", __func__);
-	port->read_urb->dev = serial->dev;
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting read urb,"
@@ -779,7 +777,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 	}
 
 	dbg("%s - submitting interrupt urb", __func__);
-	port->interrupt_in_urb->dev = serial->dev;
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
@@ -895,10 +892,23 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 static int pl2303_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg)
 {
+	struct serial_struct ser;
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
 
 	switch (cmd) {
+	case TIOCGSERIAL:
+		memset(&ser, 0, sizeof ser);
+		ser.type = PORT_16654;
+		ser.line = port->serial->minor;
+		ser.port = port->number;
+		ser.baud_base = 460800;
+
+		if (copy_to_user((void __user *)arg, &ser, sizeof ser))
+			return -EFAULT;
+
+		return 0;
+
 	case TIOCMIWAIT:
 		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
 		return wait_modem_info(port, arg);
@@ -1042,7 +1052,6 @@ static void pl2303_push_data(struct tty_struct *tty,
 		tty_flag = TTY_FRAME;
 	dbg("%s - tty_flag = %d", __func__, tty_flag);
 
-	tty_buffer_request_room(tty, urb->actual_length + 1);
 	/* overrun is special, not associated with a char */
 	if (line_status & UART_OVERRUN_ERROR)
 		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
@@ -1072,16 +1081,11 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 
 	if (status) {
 		dbg("%s - urb status = %d", __func__, status);
-		if (!port->port.count) {
-			dbg("%s - port is closed, exiting.", __func__);
-			return;
-		}
 		if (status == -EPROTO) {
 			/* PL2303 mysteriously fails with -EPROTO reschedule
 			 * the read */
 			dbg("%s - caught -EPROTO, resubmitting the urb",
 			    __func__);
-			urb->dev = port->serial->dev;
 			result = usb_submit_urb(urb, GFP_ATOMIC);
 			if (result)
 				dev_err(&urb->dev->dev, "%s - failed"
@@ -1108,15 +1112,10 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 	}
 	tty_kref_put(tty);
 	/* Schedule the next read _if_ we are still open */
-	if (port->port.count) {
-		urb->dev = port->serial->dev;
-		result = usb_submit_urb(urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&urb->dev->dev, "%s - failed resubmitting"
-				" read urb, error %d\n", __func__, result);
-	}
-
-	return;
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result && result != -EPERM)
+		dev_err(&urb->dev->dev, "%s - failed resubmitting"
+			" read urb, error %d\n", __func__, result);
 }
 
 static void pl2303_write_bulk_callback(struct urb *urb)
@@ -1146,7 +1145,6 @@ static void pl2303_write_bulk_callback(struct urb *urb)
 		dbg("%s - nonzero write bulk status received: %d", __func__,
 		    status);
 		port->write_urb->transfer_buffer_length = 1;
-		port->write_urb->dev = port->serial->dev;
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (result)
 			dev_err(&urb->dev->dev, "%s - failed resubmitting write"
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
new file mode 100644
index 00000000000..0b936206171
--- /dev/null
+++ b/drivers/usb/serial/qcaux.c
@@ -0,0 +1,96 @@
+/*
+ * Qualcomm USB Auxiliary Serial Port driver
+ *
+ * Copyright (C) 2008 Greg Kroah-Hartman <greg@kroah.com>
+ * Copyright (C) 2010 Dan Williams <dcbw@redhat.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ * Devices listed here usually provide a CDC ACM port on which normal modem
+ * AT commands and PPP can be used.  But when that port is in-use by PPP it
+ * cannot be used simultaneously for status or signal strength.  Instead, the
+ * ports here can be queried for that information using the Qualcomm DM
+ * protocol.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+/* NOTE: for now, only use this driver for devices that provide a CDC-ACM port
+ * for normal AT commands, but also provide secondary USB interfaces for the
+ * QCDM-capable ports.  Devices that do not provide a CDC-ACM port should
+ * probably be driven by option.ko.
+ */
+
+/* UTStarcom/Pantech/Curitel devices */
+#define UTSTARCOM_VENDOR_ID			0x106c
+#define UTSTARCOM_PRODUCT_PC5740		0x3701
+#define UTSTARCOM_PRODUCT_PC5750		0x3702 /* aka Pantech PX-500 */
+#define UTSTARCOM_PRODUCT_UM150			0x3711
+#define UTSTARCOM_PRODUCT_UM175_V1		0x3712
+#define UTSTARCOM_PRODUCT_UM175_V2		0x3714
+#define UTSTARCOM_PRODUCT_UM175_ALLTEL		0x3715
+
+/* CMOTECH devices */
+#define CMOTECH_VENDOR_ID			0x16d8
+#define CMOTECH_PRODUCT_CDU550			0x5553
+#define CMOTECH_PRODUCT_CDX650			0x6512
+
+static struct usb_device_id id_table[] = {
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5740, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5750, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM150, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V1, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V2, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_ALLTEL, 0xff, 0x00, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU550, 0xff, 0xff, 0x00) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDX650, 0xff, 0xff, 0x00) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver qcaux_driver = {
+	.name =		"qcaux",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+	.no_dynamic_id = 	1,
+};
+
+static struct usb_serial_driver qcaux_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"qcaux",
+	},
+	.id_table =		id_table,
+	.num_ports =		1,
+};
+
+static int __init qcaux_init(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&qcaux_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&qcaux_driver);
+	if (retval)
+		usb_serial_deregister(&qcaux_device);
+	return retval;
+}
+
+static void __exit qcaux_exit(void)
+{
+	usb_deregister(&qcaux_driver);
+	usb_serial_deregister(&qcaux_device);
+}
+
+module_init(qcaux_init);
+module_exit(qcaux_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 7528b8d57f1..310ff6ec656 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -21,7 +21,7 @@
 
 static int debug;
 
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x05c6, 0x9211)},	/* Acer Gobi QDL device */
 	{USB_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
 	{USB_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
diff --git a/drivers/usb/serial/siemens_mpi.c b/drivers/usb/serial/siemens_mpi.c
index 951ea0c6ba7..cb8195cabfd 100644
--- a/drivers/usb/serial/siemens_mpi.c
+++ b/drivers/usb/serial/siemens_mpi.c
@@ -22,7 +22,7 @@
 #define DRIVER_DESC "Driver for Siemens USB/MPI adapter"
 
 
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
 	/* Vendor and product id for 6ES7-972-0CB20-0XA0 */
 	{ USB_DEVICE(0x908, 0x0004) },
 	{ },
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ac1b6449fb6..34e6f894cba 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -226,7 +226,7 @@ static const struct sierra_iface_info direct_ip_interface_blacklist = {
 	.ifaceinfo = direct_ip_non_serial_ifaces,
 };
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
 	{ USB_DEVICE(0x03F0, 0x1B1D) },	/* HP ev2200 a.k.a MC5720 */
 	{ USB_DEVICE(0x03F0, 0x1E1D) },	/* HP hs2300 a.k.a MC8775 */
@@ -298,21 +298,12 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
+       { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
 
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver sierra_driver = {
-	.name       = "sierra",
-	.probe      = usb_serial_probe,
-	.disconnect = usb_serial_disconnect,
-	.suspend    = usb_serial_suspend,
-	.resume     = usb_serial_resume,
-	.id_table   = id_table,
-	.no_dynamic_id = 	1,
-	.supports_autosuspend =	1,
-};
 
 struct sierra_port_private {
 	spinlock_t lock;	/* lock the structure */
@@ -476,7 +467,7 @@ static void sierra_outdat_callback(struct urb *urb)
 static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count)
 {
-	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
+	struct sierra_port_private *portdata;
 	struct sierra_intf_private *intfdata;
 	struct usb_serial *serial = port->serial;
 	unsigned long flags;
@@ -603,14 +594,15 @@ static void sierra_indat_callback(struct urb *urb)
 	} else {
 		if (urb->actual_length) {
 			tty = tty_port_tty_get(&port->port);
-
-			tty_buffer_request_room(tty, urb->actual_length);
-			tty_insert_flip_string(tty, data, urb->actual_length);
-			tty_flip_buffer_push(tty);
-
-			tty_kref_put(tty);
-			usb_serial_debug_data(debug, &port->dev, __func__,
-				urb->actual_length, data);
+			if (tty) {
+				tty_insert_flip_string(tty, data,
+					urb->actual_length);
+				tty_flip_buffer_push(tty);
+
+				tty_kref_put(tty);
+				usb_serial_debug_data(debug, &port->dev,
+					__func__, urb->actual_length, data);
+			}
 		} else {
 			dev_dbg(&port->dev, "%s: empty read urb"
 				" received\n", __func__);
@@ -618,10 +610,10 @@ static void sierra_indat_callback(struct urb *urb)
 	}
 
 	/* Resubmit urb so we continue receiving */
-	if (port->port.count && status != -ESHUTDOWN && status != -EPERM) {
+	if (status != -ESHUTDOWN && status != -EPERM) {
 		usb_mark_last_busy(port->serial->dev);
 		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (err)
+		if (err && err != -EPERM)
 			dev_err(&port->dev, "resubmit read urb failed."
 				"(%d)\n", err);
 	}
@@ -680,11 +672,11 @@ static void sierra_instat_callback(struct urb *urb)
 		dev_dbg(&port->dev, "%s: error %d\n", __func__, status);
 
 	/* Resubmit urb so we continue receiving IRQ data */
-	if (port->port.count && status != -ESHUTDOWN && status != -ENOENT) {
+	if (status != -ESHUTDOWN && status != -ENOENT) {
 		usb_mark_last_busy(serial->dev);
 		urb->dev = serial->dev;
 		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (err)
+		if (err && err != -EPERM)
 			dev_err(&port->dev, "%s: resubmit intr urb "
 				"failed. (%d)\n", __func__, err);
 	}
@@ -1060,11 +1052,31 @@ static int sierra_resume(struct usb_serial *serial)
 
 	return ec ? -EIO : 0;
 }
+
+static int sierra_reset_resume(struct usb_interface *intf)
+{
+	struct usb_serial *serial = usb_get_intfdata(intf);
+	dev_err(&serial->dev->dev, "%s\n", __func__);
+	return usb_serial_resume(intf);
+}
 #else
 #define sierra_suspend NULL
 #define sierra_resume NULL
+#define sierra_reset_resume NULL
 #endif
 
+static struct usb_driver sierra_driver = {
+	.name       = "sierra",
+	.probe      = usb_serial_probe,
+	.disconnect = usb_serial_disconnect,
+	.suspend    = usb_serial_suspend,
+	.resume     = usb_serial_resume,
+	.reset_resume = sierra_reset_resume,
+	.id_table   = id_table,
+	.no_dynamic_id = 	1,
+	.supports_autosuspend =	1,
+};
+
 static struct usb_serial_driver sierra_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 1e58220403d..5d39191e724 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -45,7 +45,7 @@ static int debug;
 #define SPCP8x5_835_VID		0x04fc
 #define SPCP8x5_835_PID		0x0231
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
 	{ USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
 	{ USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
@@ -609,7 +609,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 	if (i < 0)
 		dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
 			uartdata, i);
-	dbg("0x21:0x40:0:0  %d\n", i);
+	dbg("0x21:0x40:0:0  %d", i);
 
 	if (cflag & CRTSCTS) {
 		/* enable hardware flow control */
@@ -677,7 +677,6 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
 	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
 	unsigned long flags;
-	int i;
 	int result = urb->status;
 	u8 status;
 	char tty_flag;
@@ -687,8 +686,6 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
 
 	/* check the urb status */
 	if (result) {
-		if (!port->port.count)
-			return;
 		if (result == -EPROTO) {
 			/* spcp8x5 mysteriously fails with -EPROTO */
 			/* reschedule the read */
@@ -726,26 +723,20 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
 
 	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
-		tty_buffer_request_room(tty, urb->actual_length + 1);
 		/* overrun is special, not associated with a char */
 		if (status & UART_OVERRUN_ERROR)
 			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-		for (i = 0; i < urb->actual_length; ++i)
-			tty_insert_flip_char(tty, data[i], tty_flag);
+		tty_insert_flip_string_fixed_flag(tty, data,
+						urb->actual_length, tty_flag);
 		tty_flip_buffer_push(tty);
 	}
 	tty_kref_put(tty);
 
-	/* Schedule the next read _if_ we are still open */
-	if (port->port.count) {
-		urb->dev = port->serial->dev;
-		result = usb_submit_urb(urb , GFP_ATOMIC);
-		if (result)
-			dev_dbg(&port->dev, "failed submitting read urb %d\n",
-				result);
-	}
-
-	return;
+	/* Schedule the next read */
+	urb->dev = port->serial->dev;
+	result = usb_submit_urb(urb , GFP_ATOMIC);
+	if (result)
+		dev_dbg(&port->dev, "failed submitting read urb %d\n", result);
 }
 
 /* get data from ring buffer and then write to usb bus */
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index b282c0f2d8e..72398888858 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -21,7 +21,7 @@
 
 static int debug;
 
-static struct usb_device_id id_table[] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x05e0, 0x0600) },
 	{ },
 };
@@ -51,7 +51,6 @@ static void symbol_int_callback(struct urb *urb)
 	int status = urb->status;
 	struct tty_struct *tty;
 	int result;
-	int available_room = 0;
 	int data_length;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -89,13 +88,8 @@ static void symbol_int_callback(struct urb *urb)
 		 */
 		tty = tty_port_tty_get(&port->port);
 		if (tty) {
-			available_room = tty_buffer_request_room(tty,
-							data_length);
-			if (available_room) {
-				tty_insert_flip_string(tty, &data[1],
-						       available_room);
-				tty_flip_buffer_push(tty);
-			}
+			tty_insert_flip_string(tty, &data[1], data_length);
+			tty_flip_buffer_push(tty);
 			tty_kref_put(tty);
 		}
 	} else {
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 1e9dc882169..0afe5c71c17 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1271,14 +1271,13 @@ static void ti_recv(struct device *dev, struct tty_struct *tty,
 	int cnt;
 
 	do {
-		cnt = tty_buffer_request_room(tty, length);
+		cnt = tty_insert_flip_string(tty, data, length);
 		if (cnt < length) {
 			dev_err(dev, "%s - dropping data, %d bytes lost\n",
 						__func__, length - cnt);
 			if (cnt == 0)
 				break;
 		}
-		tty_insert_flip_string(tty, data, cnt);
 		tty_flip_buffer_push(tty);
 		data += cnt;
 		length -= cnt;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 33c85f7084f..3873660d821 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -358,10 +358,6 @@ static int serial_write(struct tty_struct *tty, const unsigned char *buf,
 
 	dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
 
-	/* count is managed under the mutex lock for the tty so cannot
-	   drop to zero until after the last close completes */
-	WARN_ON(!port->port.count);
-
 	/* pass on to the driver specific version of this function */
 	retval = port->serial->type->write(tty, port, buf, count);
 
@@ -373,7 +369,6 @@ static int serial_write_room(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
-	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function */
 	return port->serial->type->write_room(tty);
 }
@@ -381,7 +376,7 @@ static int serial_write_room(struct tty_struct *tty)
 static int serial_chars_in_buffer(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	dbg("%s = port %d", __func__, port->number);
+	dbg("%s - port %d", __func__, port->number);
 
 	/* if the device was unplugged then any remaining characters
 	   fell out of the connector ;) */
@@ -396,7 +391,6 @@ static void serial_throttle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function */
 	if (port->serial->type->throttle)
 		port->serial->type->throttle(tty);
@@ -407,7 +401,6 @@ static void serial_unthrottle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function */
 	if (port->serial->type->unthrottle)
 		port->serial->type->unthrottle(tty);
@@ -421,8 +414,6 @@ static int serial_ioctl(struct tty_struct *tty, struct file *file,
 
 	dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
 
-	WARN_ON(!port->port.count);
-
 	/* pass on to the driver specific version of this function
 	   if it is available */
 	if (port->serial->type->ioctl) {
@@ -437,7 +428,6 @@ static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function
 	   if it is available */
 	if (port->serial->type->set_termios)
@@ -452,7 +442,6 @@ static int serial_break(struct tty_struct *tty, int break_state)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function
 	   if it is available */
 	if (port->serial->type->break_ctl)
@@ -513,7 +502,6 @@ static int serial_tiocmget(struct tty_struct *tty, struct file *file)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->port.count);
 	if (port->serial->type->tiocmget)
 		return port->serial->type->tiocmget(tty, file);
 	return -EINVAL;
@@ -526,7 +514,6 @@ static int serial_tiocmset(struct tty_struct *tty, struct file *file,
 
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->port.count);
 	if (port->serial->type->tiocmset)
 		return port->serial->type->tiocmset(tty, file, set, clear);
 	return -EINVAL;
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 7b5bfc4edd3..252cc2d993b 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -29,7 +29,7 @@ static char USB_DEBUG_BRK[USB_DEBUG_BRK_SIZE] = {
 	0xff,
 };
 
-static struct usb_device_id id_table [] = {
+static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x0525, 0x127a) },
 	{ },
 };
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index ad1f9232292..094942707c7 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -368,7 +368,7 @@ static int visor_write(struct tty_struct *tty, struct usb_serial_port *port,
 	spin_lock_irqsave(&priv->lock, flags);
 	if (priv->outstanding_urbs > URB_UPPER_LIMIT) {
 		spin_unlock_irqrestore(&priv->lock, flags);
-		dbg("%s - write limit hit\n", __func__);
+		dbg("%s - write limit hit", __func__);
 		return 0;
 	}
 	priv->outstanding_urbs++;
@@ -446,7 +446,7 @@ static int visor_write_room(struct tty_struct *tty)
 	spin_lock_irqsave(&priv->lock, flags);
 	if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) {
 		spin_unlock_irqrestore(&priv->lock, flags);
-		dbg("%s - write limit hit\n", __func__);
+		dbg("%s - write limit hit", __func__);
 		return 0;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -503,13 +503,9 @@ static void visor_read_bulk_callback(struct urb *urb)
 	if (urb->actual_length) {
 		tty = tty_port_tty_get(&port->port);
 		if (tty) {
-			available_room = tty_buffer_request_room(tty,
-							urb->actual_length);
-			if (available_room) {
-				tty_insert_flip_string(tty, data,
-							available_room);
-				tty_flip_buffer_push(tty);
-			}
+			tty_insert_flip_string(tty, data,
+						urb->actual_length);
+			tty_flip_buffer_push(tty);
 			tty_kref_put(tty);
 		}
 		spin_lock(&priv->lock);
@@ -807,10 +803,14 @@ static int clie_3_5_startup(struct usb_serial *serial)
 {
 	struct device *dev = &serial->dev->dev;
 	int result;
-	u8 data;
+	u8 *data;
 
 	dbg("%s", __func__);
 
+	data = kmalloc(1, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
 	/*
 	 * Note that PEG-300 series devices expect the following two calls.
 	 */
@@ -818,36 +818,42 @@ static int clie_3_5_startup(struct usb_serial *serial)
 	/* get the config number */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				  USB_REQ_GET_CONFIGURATION, USB_DIR_IN,
-				  0, 0, &data, 1, 3000);
+				  0, 0, data, 1, 3000);
 	if (result < 0) {
 		dev_err(dev, "%s: get config number failed: %d\n",
 							__func__, result);
-		return result;
+		goto out;
 	}
 	if (result != 1) {
 		dev_err(dev, "%s: get config number bad return length: %d\n",
 							__func__, result);
-		return -EIO;
+		result = -EIO;
+		goto out;
 	}
 
 	/* get the interface number */
 	result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 				  USB_REQ_GET_INTERFACE,
 				  USB_DIR_IN | USB_RECIP_INTERFACE,
-				  0, 0, &data, 1, 3000);
+				  0, 0, data, 1, 3000);
 	if (result < 0) {
 		dev_err(dev, "%s: get interface number failed: %d\n",
 							__func__, result);
-		return result;
+		goto out;
 	}
 	if (result != 1) {
 		dev_err(dev,
 			"%s: get interface number bad return length: %d\n",
 							__func__, result);
-		return -EIO;
+		result = -EIO;
+		goto out;
 	}
 
-	return generic_startup(serial);
+	result = generic_startup(serial);
+out:
+	kfree(data);
+
+	return result;
 }
 
 static int treo_attach(struct usb_serial *serial)
diff --git a/drivers/usb/serial/vivopay-serial.c b/drivers/usb/serial/vivopay-serial.c
new file mode 100644
index 00000000000..f719d00972f
--- /dev/null
+++ b/drivers/usb/serial/vivopay-serial.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2001-2005 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2009 Outpost Embedded, LLC
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+
+#define DRIVER_VERSION "v1.0"
+#define DRIVER_DESC "ViVOpay USB Serial Driver"
+
+#define VIVOPAY_VENDOR_ID 0x1d5f
+
+
+static struct usb_device_id id_table [] = {
+	/* ViVOpay 8800 */
+	{ USB_DEVICE(VIVOPAY_VENDOR_ID, 0x1004) },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver vivopay_serial_driver = {
+	.name =			"vivopay-serial",
+	.probe =		usb_serial_probe,
+	.disconnect =		usb_serial_disconnect,
+	.id_table =		id_table,
+	.no_dynamic_id =	1,
+};
+
+static struct usb_serial_driver vivopay_serial_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"vivopay-serial",
+	},
+	.id_table =		id_table,
+	.usb_driver =		&vivopay_serial_driver,
+	.num_ports =		1,
+};
+
+static int __init vivopay_serial_init(void)
+{
+	int retval;
+	retval = usb_serial_register(&vivopay_serial_device);
+	if (retval)
+		goto failed_usb_serial_register;
+	retval = usb_register(&vivopay_serial_driver);
+	if (retval)
+		goto failed_usb_register;
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	    DRIVER_DESC "\n");
+	return 0;
+failed_usb_register:
+	usb_serial_deregister(&vivopay_serial_device);
+failed_usb_serial_register:
+	return retval;
+}
+
+static void __exit vivopay_serial_exit(void)
+{
+	usb_deregister(&vivopay_serial_driver);
+	usb_serial_deregister(&vivopay_serial_device);
+}
+
+module_init(vivopay_serial_init);
+module_exit(vivopay_serial_exit);
+
+MODULE_AUTHOR("Forest Bond <forest.bond@outpostembedded.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 1093d2eb046..12ed8209ca7 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -111,17 +111,17 @@ static int debug;
    separate ID tables, and then a third table that combines them
    just for the purpose of exporting the autoloading information.
 */
-static struct usb_device_id id_table_std [] = {
+static const struct usb_device_id id_table_std[] = {
 	{ USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
 	{ }						/* Terminating entry */
 };
 
-static struct usb_device_id id_table_prerenumeration [] = {
+static const struct usb_device_id id_table_prerenumeration[] = {
 	{ USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
 	{ }						/* Terminating entry */
 };
 
-static struct usb_device_id id_table_combined [] = {
+static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) },
 	{ USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) },
 	{ }						/* Terminating entry */
@@ -1492,21 +1492,9 @@ static void rx_data_softint(struct work_struct *work)
 		wrap = list_entry(tmp, struct whiteheat_urb_wrap, list);
 		urb = wrap->urb;
 
-		if (tty && urb->actual_length) {
-			int len = tty_buffer_request_room(tty,
-							urb->actual_length);
-			/* This stuff can go away now I suspect */
-			if (unlikely(len < urb->actual_length)) {
-				spin_lock_irqsave(&info->lock, flags);
-				list_add(tmp, &info->rx_urb_q);
-				spin_unlock_irqrestore(&info->lock, flags);
-				tty_flip_buffer_push(tty);
-				schedule_work(&info->rx_work);
-				goto out;
-			}
-			tty_insert_flip_string(tty, urb->transfer_buffer, len);
-			sent += len;
-		}
+		if (tty && urb->actual_length)
+			sent += tty_insert_flip_string(tty,
+				urb->transfer_buffer, urb->actual_length);
 
 		urb->dev = port->serial->dev;
 		result = usb_submit_urb(urb, GFP_ATOMIC);