Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits)
  USB: mct_u232: fix broken close
  USB: gadget: amd5536udc.c: fix error path
  USB: imx21-hcd - fix off by one resource size calculation
  usb: gadget: fix Kconfig warning
  usb: r8a66597-udc: Add processing when USB was removed.
  mxc_udc: add workaround for ENGcm09152 for i.MX35
  USB: ftdi_sio: add device ids for ScienceScope
  USB: musb: AM35x: Workaround for fifo read issue
  USB: musb: add musb support for AM35x
  USB: AM35x: Add musb support
  usb: Fix linker errors with CONFIG_PM=n
  USB: ohci-sh - use resource_size instead of defining its own resource_len macro
  USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro
  USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro
  USB: xhci: Fix compile error when CONFIG_PM=n
  USB: accept some invalid ep0-maxpacket values
  USB: xHCI: PCI power management implementation
  USB: xHCI: bus power management implementation
  USB: xHCI: port remote wakeup implementation
  USB: xHCI: port power management implementation
  ...

Manually fix up (non-data) conflict: the SCSI merge gad renamed the
'hw_sector_size' member to 'physical_block_size', and the USB tree
brought a new use of it.

1 files changed, 12 insertions, 4 deletions

diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index d8d98cfecad..a688b1e686e 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -113,7 +113,7 @@ static int slave_alloc (struct scsi_device *sdev)
 	 * Let the scanning code know if this target merely sets
 	 * Peripheral Device Type to 0x1f to indicate no LUN.
 	 */
-	if (us->subclass == US_SC_UFI)
+	if (us->subclass == USB_SC_UFI)
 		sdev->sdev_target->pdt_1f_for_no_lun = 1;
 
 	return 0;
@@ -176,7 +176,7 @@ static int slave_configure(struct scsi_device *sdev)
 		/* Disk-type devices use MODE SENSE(6) if the protocol
 		 * (SubClass) is Transparent SCSI, otherwise they use
 		 * MODE SENSE(10). */
-		if (us->subclass != US_SC_SCSI && us->subclass != US_SC_CYP_ATACB)
+		if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
 			sdev->use_10_for_ms = 1;
 
 		/* Many disks only accept MODE SENSE transfer lengths of
@@ -209,6 +209,10 @@ static int slave_configure(struct scsi_device *sdev)
 		if (us->fflags & US_FL_CAPACITY_HEURISTICS)
 			sdev->guess_capacity = 1;
 
+		/* Some devices cannot handle READ_CAPACITY_16 */
+		if (us->fflags & US_FL_NO_READ_CAPACITY_16)
+			sdev->no_read_capacity_16 = 1;
+
 		/* assume SPC3 or latter devices support sense size > 18 */
 		if (sdev->scsi_level > SCSI_SPC_2)
 			us->fflags |= US_FL_SANE_SENSE;
@@ -245,7 +249,7 @@ static int slave_configure(struct scsi_device *sdev)
 		 * capacity will be decremented or is correct. */
 		if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
 					US_FL_SCM_MULT_TARG)) &&
-				us->protocol == US_PR_BULK)
+				us->protocol == USB_PR_BULK)
 			us->use_last_sector_hacks = 1;
 	} else {
 
@@ -253,6 +257,10 @@ static int slave_configure(struct scsi_device *sdev)
 		 * or to force 192-byte transfer lengths for MODE SENSE.
 		 * But they do need to use MODE SENSE(10). */
 		sdev->use_10_for_ms = 1;
+
+		/* Some (fake) usb cdrom devices don't like READ_DISC_INFO */
+		if (us->fflags & US_FL_NO_READ_DISC_INFO)
+			sdev->no_read_disc_info = 1;
 	}
 
 	/* The CB and CBI transports have no way to pass LUN values
@@ -261,7 +269,7 @@ static int slave_configure(struct scsi_device *sdev)
 	 * scsi_level == 0 (UNKNOWN).  Hence such devices must necessarily
 	 * be single-LUN.
 	 */
-	if ((us->protocol == US_PR_CB || us->protocol == US_PR_CBI) &&
+	if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) &&
 			sdev->scsi_level == SCSI_UNKNOWN)
 		us->max_lun = 0;