Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (100 commits)
  usb-storage: revert DMA-alignment change for Wireless USB
  USB: use reset_resume when normal resume fails
  usb_gadget: composite cdc gadget fault handling
  usb gadget: minor USBCV fix for composite framework
  USB: Fix bug with byte order in isp116x-hcd.c fio write/read
  USB: fix double kfree in ipaq in error case
  USB: fix build error in cdc-acm for CONFIG_PM=n
  USB: remove board-specific UP2OCR configuration from pxa27x-udc
  USB: EHCI: Reconciling USB register differences on MPC85xx vs MPC83xx
  USB: Fix pointer/int cast in USB devio code
  usb gadget: g_cdc dependso on NET
  USB: Au1xxx-usb: suspend/resume support.
  USB: Au1xxx-usb: clean up ohci/ehci bus glue sources.
  usbfs: don't store bad pointers in registration
  usbfs: fix race between open and unregister
  usbfs: simplify the lookup-by-minor routines
  usbfs: send disconnect signals when device is unregistered
  USB: Force unbinding of drivers lacking reset_resume or other methods
  USB: ohci-pnx4008: I2C cleanups and fixes
  USB: debug port converter does not accept more than 8 byte packets
  ...

1 files changed, 40 insertions, 43 deletions

diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 6610d2dd1e7..fcbbfdb7b2b 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -1,7 +1,5 @@
 /* Driver for USB Mass Storage compliant devices
  *
- * $Id: transport.c,v 1.47 2002/04/22 03:39:43 mdharm Exp $
- *
  * Current development and maintenance by:
  *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
  *
@@ -75,14 +73,14 @@
  * by a separate code path.)
  *
  * The abort function (usb_storage_command_abort() in scsiglue.c) first
- * sets the machine state and the ABORTING bit in us->flags to prevent
+ * sets the machine state and the ABORTING bit in us->dflags to prevent
  * new URBs from being submitted.  It then calls usb_stor_stop_transport()
- * below, which atomically tests-and-clears the URB_ACTIVE bit in us->flags
+ * below, which atomically tests-and-clears the URB_ACTIVE bit in us->dflags
  * to see if the current_urb needs to be stopped.  Likewise, the SG_ACTIVE
  * bit is tested to see if the current_sg scatter-gather request needs to be
  * stopped.  The timeout callback routine does much the same thing.
  *
- * When a disconnect occurs, the DISCONNECTING bit in us->flags is set to
+ * When a disconnect occurs, the DISCONNECTING bit in us->dflags is set to
  * prevent new URBs from being submitted, and usb_stor_stop_transport() is
  * called to stop any ongoing requests.
  *
@@ -127,8 +125,8 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
 	long timeleft;
 	int status;
 
-	/* don't submit URBs during abort/disconnect processing */
-	if (us->flags & ABORTING_OR_DISCONNECTING)
+	/* don't submit URBs during abort processing */
+	if (test_bit(US_FLIDX_ABORTING, &us->dflags))
 		return -EIO;
 
 	/* set up data structures for the wakeup system */
@@ -159,13 +157,13 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
 
 	/* since the URB has been submitted successfully, it's now okay
 	 * to cancel it */
-	set_bit(US_FLIDX_URB_ACTIVE, &us->flags);
+	set_bit(US_FLIDX_URB_ACTIVE, &us->dflags);
 
-	/* did an abort/disconnect occur during the submission? */
-	if (us->flags & ABORTING_OR_DISCONNECTING) {
+	/* did an abort occur during the submission? */
+	if (test_bit(US_FLIDX_ABORTING, &us->dflags)) {
 
 		/* cancel the URB, if it hasn't been cancelled already */
-		if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->flags)) {
+		if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) {
 			US_DEBUGP("-- cancelling URB\n");
 			usb_unlink_urb(us->current_urb);
 		}
@@ -175,7 +173,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
 	timeleft = wait_for_completion_interruptible_timeout(
 			&urb_done, timeout ? : MAX_SCHEDULE_TIMEOUT);
  
-	clear_bit(US_FLIDX_URB_ACTIVE, &us->flags);
+	clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags);
 
 	if (timeleft <= 0) {
 		US_DEBUGP("%s -- cancelling URB\n",
@@ -419,8 +417,8 @@ static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
 {
 	int result;
 
-	/* don't submit s-g requests during abort/disconnect processing */
-	if (us->flags & ABORTING_OR_DISCONNECTING)
+	/* don't submit s-g requests during abort processing */
+	if (test_bit(US_FLIDX_ABORTING, &us->dflags))
 		return USB_STOR_XFER_ERROR;
 
 	/* initialize the scatter-gather request block */
@@ -435,13 +433,13 @@ static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
 
 	/* since the block has been initialized successfully, it's now
 	 * okay to cancel it */
-	set_bit(US_FLIDX_SG_ACTIVE, &us->flags);
+	set_bit(US_FLIDX_SG_ACTIVE, &us->dflags);
 
-	/* did an abort/disconnect occur during the submission? */
-	if (us->flags & ABORTING_OR_DISCONNECTING) {
+	/* did an abort occur during the submission? */
+	if (test_bit(US_FLIDX_ABORTING, &us->dflags)) {
 
 		/* cancel the request, if it hasn't been cancelled already */
-		if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->flags)) {
+		if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) {
 			US_DEBUGP("-- cancelling sg request\n");
 			usb_sg_cancel(&us->current_sg);
 		}
@@ -449,7 +447,7 @@ static int usb_stor_bulk_transfer_sglist(struct us_data *us, unsigned int pipe,
 
 	/* wait for the completion of the transfer */
 	usb_sg_wait(&us->current_sg);
-	clear_bit(US_FLIDX_SG_ACTIVE, &us->flags);
+	clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags);
 
 	result = us->current_sg.status;
 	if (act_len)
@@ -530,7 +528,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 	/* if the command gets aborted by the higher layers, we need to
 	 * short-circuit all other processing
 	 */
-	if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) {
+	if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
 		US_DEBUGP("-- command was aborted\n");
 		srb->result = DID_ABORT << 16;
 		goto Handle_Errors;
@@ -616,7 +614,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 		/* let's clean up right away */
 		scsi_eh_restore_cmnd(srb, &ses);
 
-		if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) {
+		if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) {
 			US_DEBUGP("-- auto-sense aborted\n");
 			srb->result = DID_ABORT << 16;
 			goto Handle_Errors;
@@ -629,7 +627,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 			 * auto-sense is perfectly valid
 			 */
 			srb->result = DID_ERROR << 16;
-			if (!(us->flags & US_FL_SCM_MULT_TARG))
+			if (!(us->fflags & US_FL_SCM_MULT_TARG))
 				goto Handle_Errors;
 			return;
 		}
@@ -679,8 +677,8 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 	/* Set the RESETTING bit, and clear the ABORTING bit so that
 	 * the reset may proceed. */
 	scsi_lock(us_to_host(us));
-	set_bit(US_FLIDX_RESETTING, &us->flags);
-	clear_bit(US_FLIDX_ABORTING, &us->flags);
+	set_bit(US_FLIDX_RESETTING, &us->dflags);
+	clear_bit(US_FLIDX_ABORTING, &us->dflags);
 	scsi_unlock(us_to_host(us));
 
 	/* We must release the device lock because the pre_reset routine
@@ -695,7 +693,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 		scsi_unlock(us_to_host(us));
 		us->transport_reset(us);
 	}
-	clear_bit(US_FLIDX_RESETTING, &us->flags);
+	clear_bit(US_FLIDX_RESETTING, &us->dflags);
 }
 
 /* Stop the current URB transfer */
@@ -707,13 +705,13 @@ void usb_stor_stop_transport(struct us_data *us)
 	 * let's wake it up.  The test_and_clear_bit() call
 	 * guarantees that if a URB has just been submitted,
 	 * it won't be cancelled more than once. */
-	if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->flags)) {
+	if (test_and_clear_bit(US_FLIDX_URB_ACTIVE, &us->dflags)) {
 		US_DEBUGP("-- cancelling URB\n");
 		usb_unlink_urb(us->current_urb);
 	}
 
 	/* If we are waiting for a scatter-gather operation, cancel it. */
-	if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->flags)) {
+	if (test_and_clear_bit(US_FLIDX_SG_ACTIVE, &us->dflags)) {
 		US_DEBUGP("-- cancelling sg request\n");
 		usb_sg_cancel(&us->current_sg);
 	}
@@ -914,7 +912,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 	unsigned int cbwlen = US_BULK_CB_WRAP_LEN;
 
 	/* Take care of BULK32 devices; set extra byte to 0 */
-	if ( unlikely(us->flags & US_FL_BULK32)) {
+	if (unlikely(us->fflags & US_FL_BULK32)) {
 		cbwlen = 32;
 		us->iobuf[31] = 0;
 	}
@@ -925,7 +923,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 	bcb->Flags = srb->sc_data_direction == DMA_FROM_DEVICE ? 1 << 7 : 0;
 	bcb->Tag = ++us->tag;
 	bcb->Lun = srb->device->lun;
-	if (us->flags & US_FL_SCM_MULT_TARG)
+	if (us->fflags & US_FL_SCM_MULT_TARG)
 		bcb->Lun |= srb->device->id << 4;
 	bcb->Length = srb->cmd_len;
 
@@ -951,7 +949,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 	/* Some USB-IDE converter chips need a 100us delay between the
 	 * command phase and the data phase.  Some devices need a little
 	 * more than that, probably because of clock rate inaccuracies. */
-	if (unlikely(us->flags & US_FL_GO_SLOW))
+	if (unlikely(us->fflags & US_FL_GO_SLOW))
 		udelay(125);
 
 	if (transfer_length) {
@@ -1010,7 +1008,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 	US_DEBUGP("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
 			le32_to_cpu(bcs->Signature), bcs->Tag, 
 			residue, bcs->Status);
-	if (!(bcs->Tag == us->tag || (us->flags & US_FL_BULK_IGNORE_TAG)) ||
+	if (!(bcs->Tag == us->tag || (us->fflags & US_FL_BULK_IGNORE_TAG)) ||
 		bcs->Status > US_BULK_STAT_PHASE) {
 		US_DEBUGP("Bulk logical error\n");
 		return USB_STOR_TRANSPORT_ERROR;
@@ -1035,7 +1033,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us)
 	/* try to compute the actual residue, based on how much data
 	 * was really transferred and what the device tells us */
 	if (residue) {
-		if (!(us->flags & US_FL_IGNORE_RESIDUE)) {
+		if (!(us->fflags & US_FL_IGNORE_RESIDUE)) {
 			residue = min(residue, transfer_length);
 			scsi_set_resid(srb, max(scsi_get_resid(srb),
 			                                       (int) residue));
@@ -1090,7 +1088,7 @@ static int usb_stor_reset_common(struct us_data *us,
 	int result;
 	int result2;
 
-	if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
+	if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
 		US_DEBUGP("No reset during disconnect\n");
 		return -EIO;
 	}
@@ -1103,12 +1101,12 @@ static int usb_stor_reset_common(struct us_data *us,
 		return result;
 	}
 
- 	/* Give the device some time to recover from the reset,
- 	 * but don't delay disconnect processing. */
- 	wait_event_interruptible_timeout(us->delay_wait,
- 			test_bit(US_FLIDX_DISCONNECTING, &us->flags),
- 			HZ*6);
-	if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
+	/* Give the device some time to recover from the reset,
+	 * but don't delay disconnect processing. */
+	wait_event_interruptible_timeout(us->delay_wait,
+			test_bit(US_FLIDX_DISCONNECTING, &us->dflags),
+			HZ*6);
+	if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
 		US_DEBUGP("Reset interrupted by disconnect\n");
 		return -EIO;
 	}
@@ -1170,13 +1168,12 @@ int usb_stor_port_reset(struct us_data *us)
 		US_DEBUGP("unable to lock device for reset: %d\n", result);
 	else {
 		/* Were we disconnected while waiting for the lock? */
-		if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
+		if (test_bit(US_FLIDX_DISCONNECTING, &us->dflags)) {
 			result = -EIO;
 			US_DEBUGP("No reset during disconnect\n");
 		} else {
-			result = usb_reset_composite_device(
-					us->pusb_dev, us->pusb_intf);
-			US_DEBUGP("usb_reset_composite_device returns %d\n",
+			result = usb_reset_device(us->pusb_dev);
+			US_DEBUGP("usb_reset_device returns %d\n",
 					result);
 		}
 		if (rc_lock)