summaryrefslogtreecommitdiffstats
path: root/drivers/usb/storage
diff options
context:
space:
mode:
authorDaniel Drake <dsd@gentoo.org>2005-08-10 18:30:04 +0100
committerGreg Kroah-Hartman <gregkh@suse.de>2005-09-08 16:28:18 -0700
commit68a6457edb8a64fdcc231a4fc5406f6e3f6c9b33 (patch)
tree4bef1b4ab18a23e7d14dc96577c95310d0e2b3d7 /drivers/usb/storage
parent242cf670c09c05504ce53dfc27f8331a072f169d (diff)
[PATCH] USB: Fix HP8200 detection in shuttle_usbat
Adding flash-device support to the shuttle_usbat driver in 2.6.11 introduced the need to detect which type of device we are dealing with: CDRW drive, or flash media reader. The detection routine used turned out to not work for HP8200 CDRW users, who saw their devices being detected as a flash disk. This patch (which has been tested on both flash and cdrom) removes some unnecessary code, moves device detection to much later during initialization, and introduces a new detection routine which appears to work. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/storage')
-rw-r--r--drivers/usb/storage/shuttle_usbat.c97
1 files changed, 32 insertions, 65 deletions
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index f3b60288696..356342c6e7a 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -839,34 +839,31 @@ static int usbat_identify_device(struct us_data *us,
rc = usbat_device_reset(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
+ msleep(25);
/*
- * By examining the device signature after a reset, we can identify
- * whether the device supports the ATAPI packet interface.
- * The flash-devices do not support this, whereas the HP CDRW's obviously
- * do.
- *
- * This method is not ideal, but works because no other devices have been
- * produced based on the USBAT/USBAT02.
- *
- * Section 9.1 of the ATAPI-4 spec states (amongst other things) that
- * after a device reset, a Cylinder low of 0x14 indicates that the device
- * does support packet commands.
+ * In attempt to distinguish between HP CDRW's and Flash readers, we now
+ * execute the IDENTIFY PACKET DEVICE command. On ATA devices (i.e. flash
+ * readers), this command should fail with error. On ATAPI devices (i.e.
+ * CDROM drives), it should succeed.
*/
- rc = usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, &status);
- if (rc != USB_STOR_XFER_GOOD)
- return USB_STOR_TRANSPORT_ERROR;
+ rc = usbat_write(us, USBAT_ATA, USBAT_ATA_CMD, 0xA1);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("usbat_identify_device: Cylinder low is %02X\n", status);
+ rc = usbat_get_status(us, &status);
+ if (rc != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
- if (status == 0x14) {
+ // Check for error bit
+ if (status & 0x01) {
+ // Device is a CompactFlash reader/writer
+ US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
+ info->devicetype = USBAT_DEV_FLASH;
+ } else {
// Device is HP 8200
US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n");
info->devicetype = USBAT_DEV_HP8200;
- } else {
- // Device is a CompactFlash reader/writer
- US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
- info->devicetype = USBAT_DEV_FLASH;
}
return USB_STOR_TRANSPORT_GOOD;
@@ -1239,16 +1236,10 @@ static int usbat_select_and_test_registers(struct us_data *us)
{
int selector;
unsigned char *status = us->iobuf;
- unsigned char max_selector = 0xB0;
- if (usbat_get_device_type(us) == USBAT_DEV_FLASH)
- max_selector = 0xA0;
// try device = master, then device = slave.
-
- for (selector = 0xA0; selector <= max_selector; selector += 0x10) {
-
- if (usbat_get_device_type(us) == USBAT_DEV_HP8200 &&
- usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
+ for (selector = 0xA0; selector <= 0xB0; selector += 0x10) {
+ if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -1334,60 +1325,30 @@ int init_usbat(struct us_data *us)
US_DEBUGP("INIT 3\n");
- // At this point, we need to detect which device we are using
- if (usbat_set_transport(us, info))
- return USB_STOR_TRANSPORT_ERROR;
-
- US_DEBUGP("INIT 4\n");
-
- if (usbat_get_device_type(us) == USBAT_DEV_HP8200) {
- msleep(250);
-
- // Write 0x80 to ISA port 0x3F
- rc = usbat_write(us, USBAT_ISA, 0x3F, 0x80);
- if (rc != USB_STOR_XFER_GOOD)
- return USB_STOR_TRANSPORT_ERROR;
-
- US_DEBUGP("INIT 5\n");
-
- // Read ISA port 0x27
- rc = usbat_read(us, USBAT_ISA, 0x27, status);
- if (rc != USB_STOR_XFER_GOOD)
- return USB_STOR_TRANSPORT_ERROR;
-
- US_DEBUGP("INIT 6\n");
-
- rc = usbat_read_user_io(us, status);
- if (rc != USB_STOR_XFER_GOOD)
- return USB_STOR_TRANSPORT_ERROR;
-
- US_DEBUGP("INIT 7\n");
- }
-
rc = usbat_select_and_test_registers(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- US_DEBUGP("INIT 8\n");
+ US_DEBUGP("INIT 4\n");
rc = usbat_read_user_io(us, status);
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 9\n");
+ US_DEBUGP("INIT 5\n");
// Enable peripheral control signals and card detect
rc = usbat_device_enable_cdt(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- US_DEBUGP("INIT 10\n");
+ US_DEBUGP("INIT 6\n");
rc = usbat_read_user_io(us, status);
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 11\n");
+ US_DEBUGP("INIT 7\n");
msleep(1400);
@@ -1395,13 +1356,19 @@ int init_usbat(struct us_data *us)
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 12\n");
+ US_DEBUGP("INIT 8\n");
rc = usbat_select_and_test_registers(us);
if (rc != USB_STOR_TRANSPORT_GOOD)
return rc;
- US_DEBUGP("INIT 13\n");
+ US_DEBUGP("INIT 9\n");
+
+ // At this point, we need to detect which device we are using
+ if (usbat_set_transport(us, info))
+ return USB_STOR_TRANSPORT_ERROR;
+
+ US_DEBUGP("INIT 10\n");
if (usbat_get_device_type(us) == USBAT_DEV_FLASH) {
subcountH = 0x02;
@@ -1412,7 +1379,7 @@ int init_usbat(struct us_data *us)
if (rc != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
- US_DEBUGP("INIT 14\n");
+ US_DEBUGP("INIT 11\n");
return USB_STOR_TRANSPORT_GOOD;
}