usb-storage: make cypress_atacb a separate module

This patch (as1210) converts usb-storage's cypress_atacb subdriver
into a separate module.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 files changed, 111 insertions, 39 deletions

diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index e6cc245257f..2c73fa97d94 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -146,7 +146,7 @@ config USB_STORAGE_KARMA
 	  operation.
 
 config USB_STORAGE_CYPRESS_ATACB
-	bool "SAT emulation on Cypress USB/ATA Bridge with ATACB"
+	tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
 	depends on USB_STORAGE
 	---help---
 	  Say Y here if you want to use SAT (ata pass through) on devices based
@@ -156,6 +156,8 @@ config USB_STORAGE_CYPRESS_ATACB
 	  If you say no here your device will still work with the standard usb
 	  mass storage class.
 
+	  If this driver is compiled as a module, it will be named ums-cypress.
+
 config USB_LIBUSUAL
 	bool "The shared table of common (or usual) storage devices"
 	depends on USB
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 5fb7847e41a..0650f022e56 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -17,7 +17,6 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= jumpshot.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= alauda.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH)	+= onetouch.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA)	+= karma.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o
 
 usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
 			initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y)
@@ -28,10 +27,12 @@ else
 	obj-$(CONFIG_USB)	+= libusual.o usual-tables.o
 endif
 
+obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o
 obj-$(CONFIG_USB_STORAGE_ISD200)	+= ums-isd200.o
 obj-$(CONFIG_USB_STORAGE_SDDR09)	+= ums-sddr09.o
 obj-$(CONFIG_USB_STORAGE_SDDR55)	+= ums-sddr55.o
 
+ums-cypress-objs	:= cypress_atacb.o
 ums-isd200-objs		:= isd200.o
 ums-sddr09-objs		:= sddr09.o
 ums-sddr55-objs		:= sddr55.o
diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
index 9466a99baab..19306f7b1da 100644
--- a/drivers/usb/storage/cypress_atacb.c
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -19,6 +19,7 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/module.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_eh.h>
@@ -29,6 +30,46 @@
 #include "scsiglue.h"
 #include "debug.h"
 
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id cypress_usb_ids[] = {
+#	include "unusual_cypress.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, cypress_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev cypress_unusual_dev_list[] = {
+#	include "unusual_cypress.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 /*
  * ATACB is a protocol used on cypress usb<->ata bridge to
  * send raw ATA command over mass storage
@@ -36,7 +77,7 @@
  * More info that be found on cy7c68310_8.pdf and cy7c68300c_8.pdf
  * datasheet from cypress.com.
  */
-void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
+static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 {
 	unsigned char save_cmnd[MAX_COMMAND_SIZE];
 
@@ -197,3 +238,48 @@ end:
 	if (srb->cmnd[0] == ATA_12)
 		srb->cmd_len = 12;
 }
+
+
+static int cypress_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - cypress_usb_ids) + cypress_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->protocol_name = "Transparent SCSI with Cypress ATACB";
+	us->proto_handler = cypress_atacb_passthrough;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver cypress_driver = {
+	.name =		"ums-cypress",
+	.probe =	cypress_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	cypress_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init cypress_init(void)
+{
+	return usb_register(&cypress_driver);
+}
+
+static void __exit cypress_exit(void)
+{
+	usb_deregister(&cypress_driver);
+}
+
+module_init(cypress_init);
+module_exit(cypress_exit);
diff --git a/drivers/usb/storage/cypress_atacb.h b/drivers/usb/storage/unusual_cypress.h
index fbada898d56..44be6d75dab 100644
--- a/drivers/usb/storage/cypress_atacb.h
+++ b/drivers/usb/storage/unusual_cypress.h
@@ -1,8 +1,5 @@
-/*
- * Support for emulating SAT (ata pass through) on devices based
- *       on the Cypress USB/ATA bridge supporting ATACB.
- *
- * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr)
+/* Unusual Devices File for devices based on the Cypress USB/ATA bridge
+ *	with support for ATACB
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -19,7 +16,19 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef _CYPRESS_ATACB_H_
-#define _CYPRESS_ATACB_H_
-extern void cypress_atacb_passthrough(struct scsi_cmnd*, struct us_data*);
-#endif
+#if defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || \
+		defined(CONFIG_USB_STORAGE_CYPRESS_ATACB_MODULE)
+
+/* CY7C68300 : support atacb */
+UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
+		"Cypress",
+		"Cypress AT2LP",
+		US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
+
+/* CY7C68310 : support atacb and atacb2 */
+UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
+		"Cypress",
+		"Cypress ISD-300LP",
+		US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
+
+#endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 50034e141f9..eff97aed7bf 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -375,22 +375,6 @@ UNUSUAL_DEV(  0x04b3, 0x4001, 0x0110, 0x0110,
 		US_SC_DEVICE, US_PR_CB, NULL,
 		US_FL_MAX_SECTORS_MIN),
 
-#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
-/* CY7C68300 : support atacb */
-UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
-		"Cypress",
-		"Cypress AT2LP",
-		US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
-		0),
-
-/* CY7C68310 : support atacb and atacb2 */
-UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
-		"Cypress",
-		"Cypress ISD-300LP",
-		US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
-		0),
-#endif
-
 /* Reported by Simon Levitt <simon@whattf.com>
  * This entry needs Sub and Proto fields */
 UNUSUAL_DEV(  0x04b8, 0x0601, 0x0100, 0x0100,
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 238f271d817..241e1944cf1 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -87,9 +87,6 @@
 #ifdef CONFIG_USB_STORAGE_KARMA
 #include "karma.h"
 #endif
-#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
-#include "cypress_atacb.h"
-#endif
 #include "sierra_ms.h"
 #include "option_ms.h"
 
@@ -705,14 +702,6 @@ static void get_protocol(struct us_data *us)
 		us->protocol_name = "Uniform Floppy Interface (UFI)";
 		us->proto_handler = usb_stor_ufi_command;
 		break;
-
-#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
-	case US_SC_CYP_ATACB:
-		us->protocol_name = "Transparent SCSI with Cypress ATACB";
-		us->proto_handler = cypress_atacb_passthrough;
-		break;
-#endif
-
 	}
 }
 
diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c
index 5f2703fa48e..be461ee9f00 100644
--- a/drivers/usb/storage/usual-tables.c
+++ b/drivers/usb/storage/usual-tables.c
@@ -77,6 +77,7 @@ struct ignore_entry {
 }
 
 static struct ignore_entry ignore_ids[] = {
+#	include "unusual_cypress.h"
 #	include "unusual_isd200.h"
 #	include "unusual_sddr09.h"
 #	include "unusual_sddr55.h"