Move USB network drivers to drivers/net/usb.

It is preferable to group drivers by usage (net, scsi, ATA, ...) than
by bus.  When reviewing drivers, the [PCI|USB|PCMCIA|...] maintainer
is probably less qualified on networking issues than a networking
maintainer.  Also, from a practical standpoint, chips often
appear on multiple buses, which is why we do not put drivers into
drivers/pci/net.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

22 files changed, 0 insertions, 13225 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index b847bbc8b0e..278a22cea5b 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -87,8 +87,6 @@ source "drivers/usb/storage/Kconfig"
 
 source "drivers/usb/image/Kconfig"
 
-source "drivers/usb/net/Kconfig"
-
 source "drivers/usb/mon/Kconfig"
 
 comment "USB port drivers"
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 0ef090b1b37..72464b58699 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -23,13 +23,6 @@ obj-$(CONFIG_USB_PRINTER)	+= class/
 obj-$(CONFIG_USB_STORAGE)	+= storage/
 obj-$(CONFIG_USB)		+= storage/
 
-obj-$(CONFIG_USB_CATC)		+= net/
-obj-$(CONFIG_USB_KAWETH)	+= net/
-obj-$(CONFIG_USB_PEGASUS)	+= net/
-obj-$(CONFIG_USB_RTL8150)	+= net/
-obj-$(CONFIG_USB_USBNET)	+= net/
-obj-$(CONFIG_USB_ZD1201)	+= net/
-
 obj-$(CONFIG_USB_MDC800)	+= image/
 obj-$(CONFIG_USB_MICROTEK)	+= image/
 
diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig
deleted file mode 100644
index 3de564b2314..00000000000
--- a/drivers/usb/net/Kconfig
+++ /dev/null
@@ -1,338 +0,0 @@
-#
-# USB Network devices configuration
-#
-comment "Networking support is needed for USB Network Adapter support"
-	depends on USB && !NET
-
-menu "USB Network Adapters"
-	depends on USB && NET
-
-config USB_CATC
-	tristate "USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	select CRC32
-	---help---
-	  Say Y if you want to use one of the following 10Mbps USB Ethernet
-	  device based on the EL1210A chip. Supported devices are:
-	  Belkin F5U011
-	  Belkin F5U111
-	  CATC NetMate
-	  CATC NetMate II
-	  smartBridges smartNIC
-
-	  This driver makes the adapter appear as a normal Ethernet interface,
-	  typically on eth0, if it is the only ethernet device, or perhaps on
-	  eth1, if you have a PCI or ISA ethernet card installed.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called catc.
-
-config USB_KAWETH
-	tristate "USB KLSI KL5USB101-based ethernet device support"
-	---help---
-	  Say Y here if you want to use one of the following 10Mbps only
-	  USB Ethernet adapters based on the KLSI KL5KUSB101B chipset:
-	  3Com 3C19250
-	  ADS USB-10BT
-	  ATEN USB Ethernet
-	  ASANTE USB To Ethernet Adapter
-	  AOX Endpoints USB Ethernet
-	  Correga K.K.
-	  D-Link DSB-650C and DU-E10
-	  Entrega / Portgear E45
-	  I-O DATA USB-ET/T
-	  Jaton USB Ethernet Device Adapter
-	  Kingston Technology USB Ethernet Adapter
-	  Linksys USB10T
-	  Mobility USB-Ethernet Adapter
-	  NetGear EA-101
-	  Peracom Enet and Enet2
-	  Portsmith Express Ethernet Adapter
-	  Shark Pocket Adapter
-	  SMC 2202USB
-	  Sony Vaio port extender
-
-	  This driver is likely to work with most 10Mbps only USB Ethernet
-	  adapters, including some "no brand" devices. It does NOT work on
-	  SmartBridges smartNIC or on Belkin F5U111 devices - you should use
-	  the CATC NetMate driver for those. If you are not sure which one
-	  you need, select both, and the correct one should be selected for
-	  you.
-
-	  This driver makes the adapter appear as a normal Ethernet interface,
-	  typically on eth0, if it is the only ethernet device, or perhaps on
-	  eth1, if you have a PCI or ISA ethernet card installed.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called kaweth.
-
-config USB_PEGASUS
-	tristate "USB Pegasus/Pegasus-II based ethernet device support"
-	select MII
-	---help---
-	  Say Y here if you know you have Pegasus or Pegasus-II based adapter.
-	  If in doubt then look at <file:drivers/usb/net/pegasus.h> for the
-	  complete list of supported devices.
-
-	  If your particular adapter is not in the list and you are _sure_ it
-	  is Pegasus or Pegasus II based then send me
-	  <petkan@users.sourceforge.net> vendor and device IDs.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called pegasus.
-
-config USB_RTL8150
-	tristate "USB RTL8150 based ethernet device support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	select MII
-	help
-	  Say Y here if you have RTL8150 based usb-ethernet adapter.
-	  Send me <petkan@users.sourceforge.net> any comments you may have.
-	  You can also check for updates at <http://pegasus2.sourceforge.net/>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rtl8150.
-
-config USB_USBNET_MII
-	tristate
-	default n
-
-config USB_USBNET
-	tristate "Multi-purpose USB Networking Framework"
-	select MII if USB_USBNET_MII != n
-	---help---
-	  This driver supports several kinds of network links over USB,
-	  with "minidrivers" built around a common network driver core
-	  that supports deep queues for efficient transfers.  (This gives
-	  better performance with small packets and at high speeds).
-
-	  The USB host runs "usbnet", and the other end of the link might be:
-
-	  - Another USB host, when using USB "network" or "data transfer"
-	    cables.  These are often used to network laptops to PCs, like
-	    "Laplink" parallel cables or some motherboards.  These rely
-	    on specialized chips from many suppliers.
-
-	  - An intelligent USB gadget, perhaps embedding a Linux system.
-	    These include PDAs running Linux (iPaq, Yopy, Zaurus, and
-	    others), and devices that interoperate using the standard
-	    CDC-Ethernet specification (including many cable modems).
-
-	  - Network adapter hardware (like those for 10/100 Ethernet) which
-	    uses this driver framework.
-
-	  The link will appear with a name like "usb0", when the link is
-	  a two-node link, or "eth0" for most CDC-Ethernet devices.  Those
-	  two-node links are most easily managed with Ethernet Bridging
-	  (CONFIG_BRIDGE) instead of routing.
-
-	  For more information see <http://www.linux-usb.org/usbnet/>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called usbnet.
-
-config USB_NET_AX8817X
-	tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
-	depends on USB_USBNET && NET_ETHERNET
-	select CRC32
-	select USB_USBNET_MII
-	default y
-	help
-	  This option adds support for ASIX AX88xxx based USB 2.0
-	  10/100 Ethernet adapters.
-
- 	  This driver should work with at least the following devices:
-	    * Aten UC210T
-	    * ASIX AX88172
-	    * Billionton Systems, USB2AR
-	    * Buffalo LUA-U2-KTX
-	    * Corega FEther USB2-TX
-	    * D-Link DUB-E100
-	    * Hawking UF200
-	    * Linksys USB200M
-	    * Netgear FA120
-	    * Sitecom LN-029
-	    * Intellinet USB 2.0 Ethernet
-	    * ST Lab USB 2.0 Ethernet
-	    * TrendNet TU2-ET100
-
-	  This driver creates an interface named "ethX", where X depends on
-	  what other networking devices you have in use.
-
-
-config USB_NET_CDCETHER
-	tristate "CDC Ethernet support (smart devices such as cable modems)"
-	depends on USB_USBNET
-	default y
-	help
-	  This option supports devices conforming to the Communication Device
-	  Class (CDC) Ethernet Control Model, a specification that's easy to
-	  implement in device firmware.  The CDC specifications are available
-	  from <http://www.usb.org/>.
-
-	  CDC Ethernet is an implementation option for DOCSIS cable modems
-	  that support USB connectivity, used for non-Microsoft USB hosts.
-	  The Linux-USB CDC Ethernet Gadget driver is an open implementation.
- 	  This driver should work with at least the following devices:
-
- 	    * Ericsson PipeRider (all variants)
- 	    * Motorola (DM100 and SB4100)
- 	    * Broadcom Cable Modem (reference design)
- 	    * Toshiba PCX1100U
-	    * ...
-
-	  This driver creates an interface named "ethX", where X depends on
-	  what other networking devices you have in use.  However, if the
-	  IEEE 802 "local assignment" bit is set in the address, a "usbX"
-	  name is used instead.
-
-config USB_NET_DM9601
-	tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices"
-	depends on USB_USBNET
-	select CRC32
-	select USB_USBNET_MII
-	help
-	  This option adds support for Davicom DM9601 based USB 1.1
-	  10/100 Ethernet adapters.
-
-config USB_NET_GL620A
-	tristate "GeneSys GL620USB-A based cables"
-	depends on USB_USBNET
-	help
-	  Choose this option if you're using a host-to-host cable,
-	  or PC2PC motherboard, with this chip.
-
-	  Note that the half-duplex "GL620USB" is not supported.
-
-config USB_NET_NET1080
-	tristate "NetChip 1080 based cables (Laplink, ...)"
-	default y
-	depends on USB_USBNET
-	help
-	  Choose this option if you're using a host-to-host cable based
-	  on this design:  one NetChip 1080 chip and supporting logic,
-	  optionally with LEDs that indicate traffic
-
-config USB_NET_PLUSB
-	tristate "Prolific PL-2301/2302 based cables"
-	# if the handshake/init/reset problems, from original 'plusb',
-	# are ever resolved ... then remove "experimental"
-	depends on USB_USBNET && EXPERIMENTAL
-	help
-	  Choose this option if you're using a host-to-host cable
-	  with one of these chips.
-
-config USB_NET_MCS7830
-	tristate "MosChip MCS7830 based Ethernet adapters"
-	depends on USB_USBNET
-	select USB_USBNET_MII
-	help
-	  Choose this option if you're using a 10/100 Ethernet USB2
-	  adapter based on the MosChip 7830 controller. This includes
-	  adapters marketed under the DeLOCK brand.
-
-config USB_NET_RNDIS_HOST
-	tristate "Host for RNDIS and ActiveSync devices (EXPERIMENTAL)"
-	depends on USB_USBNET && EXPERIMENTAL
-	select USB_NET_CDCETHER
-	help
-	  This option enables hosting "Remote NDIS" USB networking links,
-	  as encouraged by Microsoft (instead of CDC Ethernet!) for use in
-	  various devices that may only support this protocol.  A variant
-	  of this protocol (with even less public documentation) seems to
-	  be at the root of Microsoft's "ActiveSync" too.
-
-	  Avoid using this protocol unless you have no better options.
-	  The protocol specification is incomplete, and is controlled by
-	  (and for) Microsoft; it isn't an "Open" ecosystem or market.
-
-config USB_NET_CDC_SUBSET
-	tristate "Simple USB Network Links (CDC Ethernet subset)"
-	depends on USB_USBNET
-	default y
-	help
-	  This driver module supports USB network devices that can work
-	  without any device-specific information.  Select it if you have
-	  one of these drivers.
-
-	  Note that while many USB host-to-host cables can work in this mode,
-	  that may mean not being able to talk to Win32 systems or more
-	  commonly not being able to handle certain events (like replugging
-	  the host on the other end) very well.  Also, these devices will
-	  not generally have permanently assigned Ethernet addresses.
-
-config USB_ALI_M5632
-	boolean "ALi M5632 based 'USB 2.0 Data Link' cables"
-	depends on USB_NET_CDC_SUBSET
-	help
-	  Choose this option if you're using a host-to-host cable
-	  based on this design, which supports USB 2.0 high speed.
-
-config USB_AN2720
-	boolean "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
-	depends on USB_NET_CDC_SUBSET
-	help
-	  Choose this option if you're using a host-to-host cable
-	  based on this design.  Note that AnchorChips is now a
-	  Cypress brand.
-
-config USB_BELKIN
-	boolean "eTEK based host-to-host cables (Advance, Belkin, ...)"
-	depends on USB_NET_CDC_SUBSET
-	default y
-	help
-	  Choose this option if you're using a host-to-host cable
-	  based on this design:  two NetChip 2890 chips and an Atmel
-	  microcontroller, with LEDs that indicate traffic.
-
-config USB_ARMLINUX
-	boolean "Embedded ARM Linux links (iPaq, ...)"
-	depends on USB_NET_CDC_SUBSET
-	default y
-	help
-	  Choose this option to support the "usb-eth" networking driver
-	  used by most of the ARM Linux community with device controllers
-	  such as the SA-11x0 and PXA-25x UDCs, or the tftp capabilities
-	  in some PXA versions of the "blob" boot loader.
-
-	  Linux-based "Gumstix" PXA-25x based systems use this protocol
-	  to talk with other Linux systems.
-
-	  Although the ROMs shipped with Sharp Zaurus products use a
-	  different link level framing protocol, you can have them use
-	  this simpler protocol by installing a different kernel.
-
-config USB_EPSON2888
-	boolean "Epson 2888 based firmware (DEVELOPMENT)"
-	depends on USB_NET_CDC_SUBSET
-	help
-	  Choose this option to support the usb networking links used
-	  by some sample firmware from Epson.
-
-config USB_KC2190
-	boolean "KT Technology KC2190 based cables (InstaNet)"
-	depends on USB_NET_CDC_SUBSET && EXPERIMENTAL
-	help
-	  Choose this option if you're using a host-to-host cable
-	  with one of these chips.
-
-config USB_NET_ZAURUS
-	tristate "Sharp Zaurus (stock ROMs) and compatible"
-	depends on USB_USBNET
-	select USB_NET_CDCETHER
-	select CRC32
-	default y
-	help
-	  Choose this option to support the usb networking links used by
-	  Zaurus models like the SL-5000D, SL-5500, SL-5600, A-300, B-500.
-	  This also supports some related device firmware, as used in some
-	  PDAs from Olympus and some cell phones from Motorola.
-
-	  If you install an alternate image, such as the Linux 2.6 based
-	  versions of OpenZaurus, you should no longer need to support this
-	  protocol.  Only the "eth-fd" or "net_fd" drivers in these devices
-	  really need this non-conformant variant of CDC Ethernet (or in
-	  some cases CDC MDLM) protocol, not "g_ether".
-
-
-endmenu
diff --git a/drivers/usb/net/Makefile b/drivers/usb/net/Makefile
deleted file mode 100644
index 595a539f838..00000000000
--- a/drivers/usb/net/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Makefile for USB Network drivers
-#
-
-obj-$(CONFIG_USB_CATC)		+= catc.o
-obj-$(CONFIG_USB_KAWETH)	+= kaweth.o
-obj-$(CONFIG_USB_PEGASUS)	+= pegasus.o
-obj-$(CONFIG_USB_RTL8150)	+= rtl8150.o
-obj-$(CONFIG_USB_NET_AX8817X)	+= asix.o
-obj-$(CONFIG_USB_NET_CDCETHER)	+= cdc_ether.o
-obj-$(CONFIG_USB_NET_DM9601)	+= dm9601.o
-obj-$(CONFIG_USB_NET_GL620A)	+= gl620a.o
-obj-$(CONFIG_USB_NET_NET1080)	+= net1080.o
-obj-$(CONFIG_USB_NET_PLUSB)	+= plusb.o
-obj-$(CONFIG_USB_NET_RNDIS_HOST)	+= rndis_host.o
-obj-$(CONFIG_USB_NET_CDC_SUBSET)	+= cdc_subset.o
-obj-$(CONFIG_USB_NET_ZAURUS)	+= zaurus.o
-obj-$(CONFIG_USB_NET_MCS7830)	+= mcs7830.o
-obj-$(CONFIG_USB_USBNET)	+= usbnet.o
-
-ifeq ($(CONFIG_USB_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
deleted file mode 100644
index d5ef97bc4d0..00000000000
--- a/drivers/usb/net/asix.c
+++ /dev/null
@@ -1,1490 +0,0 @@
-/*
- * ASIX AX8817X based USB 2.0 Ethernet Devices
- * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
- * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
- * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
- * Copyright (c) 2002-2003 TiVo Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-// #define	DEBUG			// error path messages, extra info
-// #define	VERBOSE			// more; success messages
-
-#include <linux/module.h>
-#include <linux/kmod.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/workqueue.h>
-#include <linux/mii.h>
-#include <linux/usb.h>
-#include <linux/crc32.h>
-
-#include "usbnet.h"
-
-#define DRIVER_VERSION "14-Jun-2006"
-static const char driver_name [] = "asix";
-
-/* ASIX AX8817X based USB 2.0 Ethernet Devices */
-
-#define AX_CMD_SET_SW_MII		0x06
-#define AX_CMD_READ_MII_REG		0x07
-#define AX_CMD_WRITE_MII_REG		0x08
-#define AX_CMD_SET_HW_MII		0x0a
-#define AX_CMD_READ_EEPROM		0x0b
-#define AX_CMD_WRITE_EEPROM		0x0c
-#define AX_CMD_WRITE_ENABLE		0x0d
-#define AX_CMD_WRITE_DISABLE		0x0e
-#define AX_CMD_READ_RX_CTL		0x0f
-#define AX_CMD_WRITE_RX_CTL		0x10
-#define AX_CMD_READ_IPG012		0x11
-#define AX_CMD_WRITE_IPG0		0x12
-#define AX_CMD_WRITE_IPG1		0x13
-#define AX_CMD_READ_NODE_ID		0x13
-#define AX_CMD_WRITE_IPG2		0x14
-#define AX_CMD_WRITE_MULTI_FILTER	0x16
-#define AX88172_CMD_READ_NODE_ID	0x17
-#define AX_CMD_READ_PHY_ID		0x19
-#define AX_CMD_READ_MEDIUM_STATUS	0x1a
-#define AX_CMD_WRITE_MEDIUM_MODE	0x1b
-#define AX_CMD_READ_MONITOR_MODE	0x1c
-#define AX_CMD_WRITE_MONITOR_MODE	0x1d
-#define AX_CMD_READ_GPIOS		0x1e
-#define AX_CMD_WRITE_GPIOS		0x1f
-#define AX_CMD_SW_RESET			0x20
-#define AX_CMD_SW_PHY_STATUS		0x21
-#define AX_CMD_SW_PHY_SELECT		0x22
-
-#define AX_MONITOR_MODE			0x01
-#define AX_MONITOR_LINK			0x02
-#define AX_MONITOR_MAGIC		0x04
-#define AX_MONITOR_HSFS			0x10
-
-/* AX88172 Medium Status Register values */
-#define AX88172_MEDIUM_FD		0x02
-#define AX88172_MEDIUM_TX		0x04
-#define AX88172_MEDIUM_FC		0x10
-#define AX88172_MEDIUM_DEFAULT \
-		( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC )
-
-#define AX_MCAST_FILTER_SIZE		8
-#define AX_MAX_MCAST			64
-
-#define AX_SWRESET_CLEAR		0x00
-#define AX_SWRESET_RR			0x01
-#define AX_SWRESET_RT			0x02
-#define AX_SWRESET_PRTE			0x04
-#define AX_SWRESET_PRL			0x08
-#define AX_SWRESET_BZ			0x10
-#define AX_SWRESET_IPRL			0x20
-#define AX_SWRESET_IPPD			0x40
-
-#define AX88772_IPG0_DEFAULT		0x15
-#define AX88772_IPG1_DEFAULT		0x0c
-#define AX88772_IPG2_DEFAULT		0x12
-
-/* AX88772 & AX88178 Medium Mode Register */
-#define AX_MEDIUM_PF		0x0080
-#define AX_MEDIUM_JFE		0x0040
-#define AX_MEDIUM_TFC		0x0020
-#define AX_MEDIUM_RFC		0x0010
-#define AX_MEDIUM_ENCK		0x0008
-#define AX_MEDIUM_AC		0x0004
-#define AX_MEDIUM_FD		0x0002
-#define AX_MEDIUM_GM		0x0001
-#define AX_MEDIUM_SM		0x1000
-#define AX_MEDIUM_SBP		0x0800
-#define AX_MEDIUM_PS		0x0200
-#define AX_MEDIUM_RE		0x0100
-
-#define AX88178_MEDIUM_DEFAULT	\
-	(AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \
-	 AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \
-	 AX_MEDIUM_RE )
-
-#define AX88772_MEDIUM_DEFAULT	\
-	(AX_MEDIUM_FD | AX_MEDIUM_RFC | \
-	 AX_MEDIUM_TFC | AX_MEDIUM_PS | \
-	 AX_MEDIUM_AC | AX_MEDIUM_RE )
-
-/* AX88772 & AX88178 RX_CTL values */
-#define AX_RX_CTL_SO			0x0080
-#define AX_RX_CTL_AP			0x0020
-#define AX_RX_CTL_AM			0x0010
-#define AX_RX_CTL_AB			0x0008
-#define AX_RX_CTL_SEP			0x0004
-#define AX_RX_CTL_AMALL			0x0002
-#define AX_RX_CTL_PRO			0x0001
-#define AX_RX_CTL_MFB_2048		0x0000
-#define AX_RX_CTL_MFB_4096		0x0100
-#define AX_RX_CTL_MFB_8192		0x0200
-#define AX_RX_CTL_MFB_16384		0x0300
-
-#define AX_DEFAULT_RX_CTL	\
-	(AX_RX_CTL_SO | AX_RX_CTL_AB )
-
-/* GPIO 0 .. 2 toggles */
-#define AX_GPIO_GPO0EN		0x01	/* GPIO0 Output enable */
-#define AX_GPIO_GPO_0		0x02	/* GPIO0 Output value */
-#define AX_GPIO_GPO1EN		0x04	/* GPIO1 Output enable */
-#define AX_GPIO_GPO_1		0x08	/* GPIO1 Output value */
-#define AX_GPIO_GPO2EN		0x10	/* GPIO2 Output enable */
-#define AX_GPIO_GPO_2		0x20	/* GPIO2 Output value */
-#define AX_GPIO_RESERVED	0x40	/* Reserved */
-#define AX_GPIO_RSE		0x80	/* Reload serial EEPROM */
-
-#define AX_EEPROM_MAGIC		0xdeadbeef
-#define AX88172_EEPROM_LEN	0x40
-#define AX88772_EEPROM_LEN	0xff
-
-#define PHY_MODE_MARVELL	0x0000
-#define MII_MARVELL_LED_CTRL	0x0018
-#define MII_MARVELL_STATUS	0x001b
-#define MII_MARVELL_CTRL	0x0014
-
-#define MARVELL_LED_MANUAL	0x0019
-
-#define MARVELL_STATUS_HWCFG	0x0004
-
-#define MARVELL_CTRL_TXDELAY	0x0002
-#define MARVELL_CTRL_RXDELAY	0x0080
-
-/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
-struct asix_data {
-	u8 multi_filter[AX_MCAST_FILTER_SIZE];
-	u8 phymode;
-	u8 ledmode;
-	u8 eeprom_len;
-};
-
-struct ax88172_int_data {
-	u16 res1;
-	u8 link;
-	u16 res2;
-	u8 status;
-	u16 res3;
-} __attribute__ ((packed));
-
-static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-			    u16 size, void *data)
-{
-	devdbg(dev,"asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
-		cmd, value, index, size);
-	return usb_control_msg(
-		dev->udev,
-		usb_rcvctrlpipe(dev->udev, 0),
-		cmd,
-		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-		value,
-		index,
-		data,
-		size,
-		USB_CTRL_GET_TIMEOUT);
-}
-
-static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-			     u16 size, void *data)
-{
-	devdbg(dev,"asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
-		cmd, value, index, size);
-	return usb_control_msg(
-		dev->udev,
-		usb_sndctrlpipe(dev->udev, 0),
-		cmd,
-		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-		value,
-		index,
-		data,
-		size,
-		USB_CTRL_SET_TIMEOUT);
-}
-
-static void asix_async_cmd_callback(struct urb *urb)
-{
-	struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
-
-	if (urb->status < 0)
-		printk(KERN_DEBUG "asix_async_cmd_callback() failed with %d",
-			urb->status);
-
-	kfree(req);
-	usb_free_urb(urb);
-}
-
-static void
-asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
-				    u16 size, void *data)
-{
-	struct usb_ctrlrequest *req;
-	int status;
-	struct urb *urb;
-
-	devdbg(dev,"asix_write_cmd_async() cmd=0x%02x value=0x%04x index=0x%04x size=%d",
-		cmd, value, index, size);
-	if ((urb = usb_alloc_urb(0, GFP_ATOMIC)) == NULL) {
-		deverr(dev, "Error allocating URB in write_cmd_async!");
-		return;
-	}
-
-	if ((req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC)) == NULL) {
-		deverr(dev, "Failed to allocate memory for control request");
-		usb_free_urb(urb);
-		return;
-	}
-
-	req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
-	req->bRequest = cmd;
-	req->wValue = cpu_to_le16(value);
-	req->wIndex = cpu_to_le16(index);
-	req->wLength = cpu_to_le16(size);
-
-	usb_fill_control_urb(urb, dev->udev,
-			     usb_sndctrlpipe(dev->udev, 0),
-			     (void *)req, data, size,
-			     asix_async_cmd_callback, req);
-
-	if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
-		deverr(dev, "Error submitting the control message: status=%d",
-				status);
-		kfree(req);
-		usb_free_urb(urb);
-	}
-}
-
-static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
-{
-	u8  *head;
-	u32  header;
-	char *packet;
-	struct sk_buff *ax_skb;
-	u16 size;
-
-	head = (u8 *) skb->data;
-	memcpy(&header, head, sizeof(header));
-	le32_to_cpus(&header);
-	packet = head + sizeof(header);
-
-	skb_pull(skb, 4);
-
-	while (skb->len > 0) {
-		if ((short)(header & 0x0000ffff) !=
-		    ~((short)((header & 0xffff0000) >> 16))) {
-			deverr(dev,"asix_rx_fixup() Bad Header Length");
-		}
-		/* get the packet length */
-		size = (u16) (header & 0x0000ffff);
-
-		if ((skb->len) - ((size + 1) & 0xfffe) == 0)
-			return 2;
-		if (size > ETH_FRAME_LEN) {
-			deverr(dev,"asix_rx_fixup() Bad RX Length %d", size);
-			return 0;
-		}
-		ax_skb = skb_clone(skb, GFP_ATOMIC);
-		if (ax_skb) {
-			ax_skb->len = size;
-			ax_skb->data = packet;
-			skb_set_tail_pointer(ax_skb, size);
-			usbnet_skb_return(dev, ax_skb);
-		} else {
-			return 0;
-		}
-
-		skb_pull(skb, (size + 1) & 0xfffe);
-
-		if (skb->len == 0)
-			break;
-
-		head = (u8 *) skb->data;
-		memcpy(&header, head, sizeof(header));
-		le32_to_cpus(&header);
-		packet = head + sizeof(header);
-		skb_pull(skb, 4);
-	}
-
-	if (skb->len < 0) {
-		deverr(dev,"asix_rx_fixup() Bad SKB Length %d", skb->len);
-		return 0;
-	}
-	return 1;
-}
-
-static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
-					gfp_t flags)
-{
-	int padlen;
-	int headroom = skb_headroom(skb);
-	int tailroom = skb_tailroom(skb);
-	u32 packet_len;
-	u32 padbytes = 0xffff0000;
-
-	padlen = ((skb->len + 4) % 512) ? 0 : 4;
-
-	if ((!skb_cloned(skb))
-	    && ((headroom + tailroom) >= (4 + padlen))) {
-		if ((headroom < 4) || (tailroom < padlen)) {
-			skb->data = memmove(skb->head + 4, skb->data, skb->len);
-			skb_set_tail_pointer(skb, skb->len);
-		}
-	} else {
-		struct sk_buff *skb2;
-		skb2 = skb_copy_expand(skb, 4, padlen, flags);
-		dev_kfree_skb_any(skb);
-		skb = skb2;
-		if (!skb)
-			return NULL;
-	}
-
-	skb_push(skb, 4);
-	packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
-	cpu_to_le32s(&packet_len);
-	skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len));
-
-	if ((skb->len % 512) == 0) {
-		cpu_to_le32s(&padbytes);
-		memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
-		skb_put(skb, sizeof(padbytes));
-	}
-	return skb;
-}
-
-static void asix_status(struct usbnet *dev, struct urb *urb)
-{
-	struct ax88172_int_data *event;
-	int link;
-
-	if (urb->actual_length < 8)
-		return;
-
-	event = urb->transfer_buffer;
-	link = event->link & 0x01;
-	if (netif_carrier_ok(dev->net) != link) {
-		if (link) {
-			netif_carrier_on(dev->net);
-			usbnet_defer_kevent (dev, EVENT_LINK_RESET );
-		} else
-			netif_carrier_off(dev->net);
-		devdbg(dev, "Link Status is: %d", link);
-	}
-}
-
-static inline int asix_set_sw_mii(struct usbnet *dev)
-{
-	int ret;
-	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
-	if (ret < 0)
-		deverr(dev, "Failed to enable software MII access");
-	return ret;
-}
-
-static inline int asix_set_hw_mii(struct usbnet *dev)
-{
-	int ret;
-	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
-	if (ret < 0)
-		deverr(dev, "Failed to enable hardware MII access");
-	return ret;
-}
-
-static inline int asix_get_phy_addr(struct usbnet *dev)
-{
-	int ret = 0;
-	void *buf;
-
-	devdbg(dev, "asix_get_phy_addr()");
-
-	buf = kmalloc(2, GFP_KERNEL);
-	if (!buf)
-		goto out1;
-
-	if ((ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID,
-				    0, 0, 2, buf)) < 2) {
-		deverr(dev, "Error reading PHYID register: %02x", ret);
-		goto out2;
-	}
-	devdbg(dev, "asix_get_phy_addr() returning 0x%04x", *((u16 *)buf));
-	ret = *((u8 *)buf + 1);
-out2:
-	kfree(buf);
-out1:
-	return ret;
-}
-
-static int asix_sw_reset(struct usbnet *dev, u8 flags)
-{
-	int ret;
-
-        ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
-	if (ret < 0)
-		deverr(dev,"Failed to send software reset: %02x", ret);
-
-	return ret;
-}
-
-static u16 asix_read_rx_ctl(struct usbnet *dev)
-{
-	u16 ret = 0;
-	void *buf;
-
-	buf = kmalloc(2, GFP_KERNEL);
-	if (!buf)
-		goto out1;
-
-	if ((ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL,
-				    0, 0, 2, buf)) < 2) {
-		deverr(dev, "Error reading RX_CTL register: %02x", ret);
-		goto out2;
-	}
-	ret = le16_to_cpu(*((u16 *)buf));
-out2:
-	kfree(buf);
-out1:
-	return ret;
-}
-
-static int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
-{
-	int ret;
-
-	devdbg(dev,"asix_write_rx_ctl() - mode = 0x%04x", mode);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
-	if (ret < 0)
-		deverr(dev, "Failed to write RX_CTL mode to 0x%04x: %02x",
-		       mode, ret);
-
-	return ret;
-}
-
-static u16 asix_read_medium_status(struct usbnet *dev)
-{
-	u16 ret = 0;
-	void *buf;
-
-	buf = kmalloc(2, GFP_KERNEL);
-	if (!buf)
-		goto out1;
-
-	if ((ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS,
-				    0, 0, 2, buf)) < 2) {
-		deverr(dev, "Error reading Medium Status register: %02x", ret);
-		goto out2;
-	}
-	ret = le16_to_cpu(*((u16 *)buf));
-out2:
-	kfree(buf);
-out1:
-	return ret;
-}
-
-static int asix_write_medium_mode(struct usbnet *dev, u16 mode)
-{
-	int ret;
-
-	devdbg(dev,"asix_write_medium_mode() - mode = 0x%04x", mode);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
-	if (ret < 0)
-		deverr(dev, "Failed to write Medium Mode mode to 0x%04x: %02x",
-			mode, ret);
-
-	return ret;
-}
-
-static int asix_write_gpio(struct usbnet *dev, u16 value, int sleep)
-{
-	int ret;
-
-	devdbg(dev,"asix_write_gpio() - value = 0x%04x", value);
-	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL);
-	if (ret < 0)
-		deverr(dev, "Failed to write GPIO value 0x%04x: %02x",
-			value, ret);
-
-	if (sleep)
-		msleep(sleep);
-
-	return ret;
-}
-
-/*
- * AX88772 & AX88178 have a 16-bit RX_CTL value
- */
-static void asix_set_multicast(struct net_device *net)
-{
-	struct usbnet *dev = netdev_priv(net);
-	struct asix_data *data = (struct asix_data *)&dev->data;
-	u16 rx_ctl = AX_DEFAULT_RX_CTL;
-
-	if (net->flags & IFF_PROMISC) {
-		rx_ctl |= AX_RX_CTL_PRO;
-	} else if (net->flags & IFF_ALLMULTI
-		   || net->mc_count > AX_MAX_MCAST) {
-		rx_ctl |= AX_RX_CTL_AMALL;
-	} else if (net->mc_count == 0) {
-		/* just broadcast and directed */
-	} else {
-		/* We use the 20 byte dev->data
-		 * for our 8 byte filter buffer
-		 * to avoid allocating memory that
-		 * is tricky to free later */
-		struct dev_mc_list *mc_list = net->mc_list;
-		u32 crc_bits;
-		int i;
-
-		memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
-
-		/* Build the multicast hash filter. */
-		for (i = 0; i < net->mc_count; i++) {
-			crc_bits =
-			    ether_crc(ETH_ALEN,
-				      mc_list->dmi_addr) >> 26;
-			data->multi_filter[crc_bits >> 3] |=
-			    1 << (crc_bits & 7);
-			mc_list = mc_list->next;
-		}
-
-		asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
-				   AX_MCAST_FILTER_SIZE, data->multi_filter);
-
-		rx_ctl |= AX_RX_CTL_AM;
-	}
-
-	asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
-}
-
-static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
-{
-	struct usbnet *dev = netdev_priv(netdev);
-	u16 res;
-
-	mutex_lock(&dev->phy_mutex);
-	asix_set_sw_mii(dev);
-	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
-				(__u16)loc, 2, (u16 *)&res);
-	asix_set_hw_mii(dev);
-	mutex_unlock(&dev->phy_mutex);
-
-	devdbg(dev, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x", phy_id, loc, le16_to_cpu(res & 0xffff));
-
-	return le16_to_cpu(res & 0xffff);
-}
-
-static void
-asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
-{
-	struct usbnet *dev = netdev_priv(netdev);
-	u16 res = cpu_to_le16(val);
-
-	devdbg(dev, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x", phy_id, loc, val);
-	mutex_lock(&dev->phy_mutex);
-	asix_set_sw_mii(dev);
-	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
-				(__u16)loc, 2, (u16 *)&res);
-	asix_set_hw_mii(dev);
-	mutex_unlock(&dev->phy_mutex);
-}
-
-/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
-static u32 asix_get_phyid(struct usbnet *dev)
-{
-	int phy_reg;
-	u32 phy_id;
-
-	phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
-	if (phy_reg < 0)
-		return 0;
-
-	phy_id = (phy_reg & 0xffff) << 16;
-
-	phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
-	if (phy_reg < 0)
-		return 0;
-
-	phy_id |= (phy_reg & 0xffff);
-
-	return phy_id;
-}
-
-static void
-asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
-{
-	struct usbnet *dev = netdev_priv(net);
-	u8 opt;
-
-	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
-		wolinfo->supported = 0;
-		wolinfo->wolopts = 0;
-		return;
-	}
-	wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
-	wolinfo->wolopts = 0;
-	if (opt & AX_MONITOR_MODE) {
-		if (opt & AX_MONITOR_LINK)
-			wolinfo->wolopts |= WAKE_PHY;
-		if (opt & AX_MONITOR_MAGIC)
-			wolinfo->wolopts |= WAKE_MAGIC;
-	}
-}
-
-static int
-asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
-{
-	struct usbnet *dev = netdev_priv(net);
-	u8 opt = 0;
-	u8 buf[1];
-
-	if (wolinfo->wolopts & WAKE_PHY)
-		opt |= AX_MONITOR_LINK;
-	if (wolinfo->wolopts & WAKE_MAGIC)
-		opt |= AX_MONITOR_MAGIC;
-	if (opt != 0)
-		opt |= AX_MONITOR_MODE;
-
-	if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
-			      opt, 0, 0, &buf) < 0)
-		return -EINVAL;
-
-	return 0;
-}
-
-static int asix_get_eeprom_len(struct net_device *net)
-{
-	struct usbnet *dev = netdev_priv(net);
-	struct asix_data *data = (struct asix_data *)&dev->data;
-
-	return data->eeprom_len;
-}
-
-static int asix_get_eeprom(struct net_device *net,
-			      struct ethtool_eeprom *eeprom, u8 *data)
-{
-	struct usbnet *dev = netdev_priv(net);
-	u16 *ebuf = (u16 *)data;
-	int i;
-
-	/* Crude hack to ensure that we don't overwrite memory
-	 * if an odd length is supplied
-	 */
-	if (eeprom->len % 2)
-		return -EINVAL;
-
-	eeprom->magic = AX_EEPROM_MAGIC;
-
-	/* ax8817x returns 2 bytes from eeprom on read */
-	for (i=0; i < eeprom->len / 2; i++) {
-		if (asix_read_cmd(dev, AX_CMD_READ_EEPROM,
-			eeprom->offset + i, 0, 2, &ebuf[i]) < 0)
-			return -EINVAL;
-	}
-	return 0;
-}
-
-static void asix_get_drvinfo (struct net_device *net,
-				 struct ethtool_drvinfo *info)
-{
-	struct usbnet *dev = netdev_priv(net);
-	struct asix_data *data = (struct asix_data *)&dev->data;
-
-	/* Inherit standard device info */
-	usbnet_get_drvinfo(net, info);
-	strncpy (info->driver, driver_name, sizeof info->driver);
-	strncpy (info->version, DRIVER_VERSION, sizeof info->version);
-	info->eedump_len = data->eeprom_len;
-}
-
-static u32 asix_get_link(struct net_device *net)
-{
-	struct usbnet *dev = netdev_priv(net);
-
-	return mii_link_ok(&dev->mii);
-}
-
-static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
-{
-	struct usbnet *dev = netdev_priv(net);
-
-	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
-}
-
-/* We need to override some ethtool_ops so we require our
-   own structure so we don't interfere with other usbnet
-   devices that may be connected at the same time. */
-static struct ethtool_ops ax88172_ethtool_ops = {
-	.get_drvinfo		= asix_get_drvinfo,
-	.get_link		= asix_get_link,
-	.get_msglevel		= usbnet_get_msglevel,
-	.set_msglevel		= usbnet_set_msglevel,
-	.get_wol		= asix_get_wol,
-	.set_wol		= asix_set_wol,
-	.get_eeprom_len		= asix_get_eeprom_len,
-	.get_eeprom		= asix_get_eeprom,
-	.get_settings		= usbnet_get_settings,
-	.set_settings		= usbnet_set_settings,
-	.nway_reset		= usbnet_nway_reset,
-};
-
-static void ax88172_set_multicast(struct net_device *net)
-{
-	struct usbnet *dev = netdev_priv(net);
-	struct asix_data *data = (struct asix_data *)&dev->data;
-	u8 rx_ctl = 0x8c;
-
-	if (net->flags & IFF_PROMISC) {
-		rx_ctl |= 0x01;
-	} else if (net->flags & IFF_ALLMULTI
-		   || net->mc_count > AX_MAX_MCAST) {
-		rx_ctl |= 0x02;
-	} else if (net->mc_count == 0) {
-		/* just broadcast and directed */
-	} else {
-		/* We use the 20 byte dev->data
-		 * for our 8 byte filter buffer
-		 * to avoid allocating memory that
-		 * is tricky to free later */
-		struct dev_mc_list *mc_list = net->mc_list;
-		u32 crc_bits;
-		int i;
-
-		memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
-
-		/* Build the multicast hash filter. */
-		for (i = 0; i < net->mc_count; i++) {
-			crc_bits =
-			    ether_crc(ETH_ALEN,
-				      mc_list->dmi_addr) >> 26;
-			data->multi_filter[crc_bits >> 3] |=
-			    1 << (crc_bits & 7);
-			mc_list = mc_list->next;
-		}
-
-		asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
-				   AX_MCAST_FILTER_SIZE, data->multi_filter);
-
-		rx_ctl |= 0x10;
-	}
-
-	asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
-}
-
-static int ax88172_link_reset(struct usbnet *dev)
-{
-	u8 mode;
-	struct ethtool_cmd ecmd;
-
-	mii_check_media(&dev->mii, 1, 1);
-	mii_ethtool_gset(&dev->mii, &ecmd);
-	mode = AX88172_MEDIUM_DEFAULT;
-
-	if (ecmd.duplex != DUPLEX_FULL)
-		mode |= ~AX88172_MEDIUM_FD;
-
-	devdbg(dev, "ax88172_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode);
-
-	asix_write_medium_mode(dev, mode);
-
-	return 0;
-}
-
-static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
-{
-	int ret = 0;
-	void *buf;
-	int i;
-	unsigned long gpio_bits = dev->driver_info->data;
-	struct asix_data *data = (struct asix_data *)&dev->data;
-
-	data->eeprom_len = AX88172_EEPROM_LEN;
-
-	usbnet_get_endpoints(dev,intf);
-
-	buf = kmalloc(ETH_ALEN, GFP_KERNEL);
-	if(!buf) {
-		ret = -ENOMEM;
-		goto out1;
-	}
-
-	/* Toggle the GPIOs in a manufacturer/model specific way */
-	for (i = 2; i >= 0; i--) {
-		if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
-					(gpio_bits >> (i * 8)) & 0xff, 0, 0,
-					buf)) < 0)
-			goto out2;
-		msleep(5);
-	}
-
-	if ((ret = asix_write_rx_ctl(dev, 0x80)) < 0)
-		goto out2;
-
-	/* Get the MAC address */
-	memset(buf, 0, ETH_ALEN);
-	if ((ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID,
-				0, 0, 6, buf)) < 0) {
-		dbg("read AX_CMD_READ_NODE_ID failed: %d", ret);
-		goto out2;
-	}
-	memcpy(dev->net->dev_addr, buf, ETH_ALEN);
-
-	/* Initialize MII structure */
-	dev->mii.dev = dev->net;
-	dev->mii.mdio_read = asix_mdio_read;
-	dev->mii.mdio_write = asix_mdio_write;
-	dev->mii.phy_id_mask = 0x3f;
-	dev->mii.reg_num_mask = 0x1f;
-	dev->mii.phy_id = asix_get_phy_addr(dev);
-	dev->net->do_ioctl = asix_ioctl;
-
-	dev->net->set_multicast_list = ax88172_set_multicast;
-	dev->net->ethtool_ops = &ax88172_ethtool_ops;
-
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
-		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
-	mii_nway_restart(&dev->mii);
-
-	return 0;
-out2:
-	kfree(buf);
-out1:
-	return ret;
-}
-
-static struct ethtool_ops ax88772_ethtool_ops = {
-	.get_drvinfo		= asix_get_drvinfo,
-	.get_link		= asix_get_link,
-	.get_msglevel		= usbnet_get_msglevel,
-	.set_msglevel		= usbnet_set_msglevel,
-	.get_wol		= asix_get_wol,
-	.set_wol		= asix_set_wol,
-	.get_eeprom_len		= asix_get_eeprom_len,
-	.get_eeprom		= asix_get_eeprom,
-	.get_settings		= usbnet_get_settings,
-	.set_settings		= usbnet_set_settings,
-	.nway_reset		= usbnet_nway_reset,
-};
-
-static int ax88772_link_reset(struct usbnet *dev)
-{
-	u16 mode;
-	struct ethtool_cmd ecmd;
-
-	mii_check_media(&dev->mii, 1, 1);
-	mii_ethtool_gset(&dev->mii, &ecmd);
-	mode = AX88772_MEDIUM_DEFAULT;
-
-	if (ecmd.speed != SPEED_100)
-		mode &= ~AX_MEDIUM_PS;
-
-	if (ecmd.duplex != DUPLEX_FULL)
-		mode &= ~AX_MEDIUM_FD;
-
-	devdbg(dev, "ax88772_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode);
-
-	asix_write_medium_mode(dev, mode);
-
-	return 0;
-}
-
-static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
-{
-	int ret, embd_phy;
-	void *buf;
-	u16 rx_ctl;
-	struct asix_data *data = (struct asix_data *)&dev->data;
-	u32 phyid;
-
-	data->eeprom_len = AX88772_EEPROM_LEN;
-
-	usbnet_get_endpoints(dev,intf);
-
-	buf = kmalloc(6, GFP_KERNEL);
-	if(!buf) {
-		dbg ("Cannot allocate memory for buffer");
-		ret = -ENOMEM;
-		goto out1;
-	}
-
-	if ((ret = asix_write_gpio(dev,
-			AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5)) < 0)
-		goto out2;
-
-	/* 0x10 is the phy id of the embedded 10/100 ethernet phy */
-	embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
-	if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
-				embd_phy, 0, 0, buf)) < 0) {
-		dbg("Select PHY #1 failed: %d", ret);
-		goto out2;
-	}
-
-	if ((ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL)) < 0)
-		goto out2;
-
-	msleep(150);
-	if ((ret = asix_sw_reset(dev, AX_SWRESET_CLEAR)) < 0)
-		goto out2;
-
-	msleep(150);
-	if (embd_phy) {
-		if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL)) < 0)
-			goto out2;
-	}
-	else {
-		if ((ret = asix_sw_reset(dev, AX_SWRESET_PRTE)) < 0)
-			goto out2;
-	}
-
-	msleep(150);
-	rx_ctl = asix_read_rx_ctl(dev);
-	dbg("RX_CTL is 0x%04x after software reset", rx_ctl);
-	if ((ret = asix_write_rx_ctl(dev, 0x0000)) < 0)
-		goto out2;
-
-	rx_ctl = asix_read_rx_ctl(dev);
-	dbg("RX_CTL is 0x%04x setting to 0x0000", rx_ctl);
-
-	/* Get the MAC address */
-	memset(buf, 0, ETH_ALEN);
-	if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
-				0, 0, ETH_ALEN, buf)) < 0) {
-		dbg("Failed to read MAC address: %d", ret);
-		goto out2;
-	}
-	memcpy(dev->net->dev_addr, buf, ETH_ALEN);
-
-	/* Initialize MII structure */
-	dev->mii.dev = dev->net;
-	dev->mii.mdio_read = asix_mdio_read;
-	dev->mii.mdio_write = asix_mdio_write;
-	dev->mii.phy_id_mask = 0x1f;
-	dev->mii.reg_num_mask = 0x1f;
-	dev->net->do_ioctl = asix_ioctl;
-	dev->mii.phy_id = asix_get_phy_addr(dev);
-
-	phyid = asix_get_phyid(dev);
-	dbg("PHYID=0x%08x", phyid);
-
-	if ((ret = asix_sw_reset(dev, AX_SWRESET_PRL)) < 0)
-		goto out2;
-
-	msleep(150);
-
-	if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL)) < 0)
-		goto out2;
-
-	msleep(150);
-
-	dev->net->set_multicast_list = asix_set_multicast;
-	dev->net->ethtool_ops = &ax88772_ethtool_ops;
-
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
-			ADVERTISE_ALL | ADVERTISE_CSMA);
-	mii_nway_restart(&dev->mii);
-
-	if ((ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT)) < 0)
-		goto out2;
-
-	if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
-				AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
-				AX88772_IPG2_DEFAULT, 0, buf)) < 0) {
-		dbg("Write IPG,IPG1,IPG2 failed: %d", ret);
-		goto out2;
-	}
-
-	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
-	if ((ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL)) < 0)
-		goto out2;
-
-	rx_ctl = asix_read_rx_ctl(dev);
-	dbg("RX_CTL is 0x%04x after all initializations", rx_ctl);
-
-	rx_ctl = asix_read_medium_status(dev);
-	dbg("Medium Status is 0x%04x after all initializations", rx_ctl);
-
-	kfree(buf);
-
-	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
-	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
-		/* hard_mtu  is still the default - the device does not support
-		   jumbo eth frames */
-		dev->rx_urb_size = 2048;
-	}
-
-	return 0;
-
-out2:
-	kfree(buf);
-out1:
-	return ret;
-}
-
-static struct ethtool_ops ax88178_ethtool_ops = {
-	.get_drvinfo		= asix_get_drvinfo,
-	.get_link		= asix_get_link,
-	.get_msglevel		= usbnet_get_msglevel,
-	.set_msglevel		= usbnet_set_msglevel,
-	.get_wol		= asix_get_wol,
-	.set_wol		= asix_set_wol,
-	.get_eeprom_len		= asix_get_eeprom_len,
-	.get_eeprom		= asix_get_eeprom,
-	.get_settings		= usbnet_get_settings,
-	.set_settings		= usbnet_set_settings,
-	.nway_reset		= usbnet_nway_reset,
-};
-
-static int marvell_phy_init(struct usbnet *dev)
-{
-	struct asix_data *data = (struct asix_data *)&dev->data;
-	u16 reg;
-
-	devdbg(dev,"marvell_phy_init()");
-
-	reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS);
-	devdbg(dev,"MII_MARVELL_STATUS = 0x%04x", reg);
-
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL,
-			MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY);
-
-	if (data->ledmode) {
-		reg = asix_mdio_read(dev->net, dev->mii.phy_id,
-			MII_MARVELL_LED_CTRL);
-		devdbg(dev,"MII_MARVELL_LED_CTRL (1) = 0x%04x", reg);
-
-		reg &= 0xf8ff;
-		reg |= (1 + 0x0100);
-		asix_mdio_write(dev->net, dev->mii.phy_id,
-			MII_MARVELL_LED_CTRL, reg);
-
-		reg = asix_mdio_read(dev->net, dev->mii.phy_id,
-			MII_MARVELL_LED_CTRL);
-		devdbg(dev,"MII_MARVELL_LED_CTRL (2) = 0x%04x", reg);
-		reg &= 0xfc0f;
-	}
-
-	return 0;
-}
-
-static int marvell_led_status(struct usbnet *dev, u16 speed)
-{
-	u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL);
-
-	devdbg(dev, "marvell_led_status() read 0x%04x", reg);
-
-	/* Clear out the center LED bits - 0x03F0 */
-	reg &= 0xfc0f;
-
-	switch (speed) {
-		case SPEED_1000:
-			reg |= 0x03e0;
-			break;
-		case SPEED_100:
-			reg |= 0x03b0;
-			break;
-		default:
-			reg |= 0x02f0;
-	}
-
-	devdbg(dev, "marvell_led_status() writing 0x%04x", reg);
-	asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg);
-
-	return 0;
-}
-
-static int ax88178_link_reset(struct usbnet *dev)
-{
-	u16 mode;
-	struct ethtool_cmd ecmd;
-	struct asix_data *data = (struct asix_data *)&dev->data;
-
-	devdbg(dev,"ax88178_link_reset()");
-
-	mii_check_media(&dev->mii, 1, 1);
-	mii_ethtool_gset(&dev->mii, &ecmd);
-	mode = AX88178_MEDIUM_DEFAULT;
-
-	if (ecmd.speed == SPEED_1000)
-		mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK;
-	else if (ecmd.speed == SPEED_100)
-		mode |= AX_MEDIUM_PS;
-	else
-		mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
-
-	if (ecmd.duplex == DUPLEX_FULL)
-		mode |= AX_MEDIUM_FD;
-	else
-		mode &= ~AX_MEDIUM_FD;
-
-	devdbg(dev, "ax88178_link_reset() speed: %d duplex: %d setting mode to 0x%04x", ecmd.speed, ecmd.duplex, mode);
-
-	asix_write_medium_mode(dev, mode);
-
-	if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
-		marvell_led_status(dev, ecmd.speed);
-
-	return 0;
-}
-
-static void ax88178_set_mfb(struct usbnet *dev)
-{
-	u16 mfb = AX_RX_CTL_MFB_16384;
-	u16 rxctl;
-	u16 medium;
-	int old_rx_urb_size = dev->rx_urb_size;
-
-	if (dev->hard_mtu < 2048) {
-		dev->rx_urb_size = 2048;
-		mfb = AX_RX_CTL_MFB_2048;
-	} else if (dev->hard_mtu < 4096) {
-		dev->rx_urb_size = 4096;
-		mfb = AX_RX_CTL_MFB_4096;
-	} else if (dev->hard_mtu < 8192) {
-		dev->rx_urb_size = 8192;
-		mfb = AX_RX_CTL_MFB_8192;
-	} else if (dev->hard_mtu < 16384) {
-		dev->rx_urb_size = 16384;
-		mfb = AX_RX_CTL_MFB_16384;
-	}
-
-	rxctl = asix_read_rx_ctl(dev);
-	asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb);
-
-	medium = asix_read_medium_status(dev);
-	if (dev->net->mtu > 1500)
-		medium |= AX_MEDIUM_JFE;
-	else
-		medium &= ~AX_MEDIUM_JFE;
-	asix_write_medium_mode(dev, medium);
-
-	if (dev->rx_urb_size > old_rx_urb_size)
-		usbnet_unlink_rx_urbs(dev);
-}
-
-static int ax88178_change_mtu(struct net_device *net, int new_mtu)
-{
-	struct usbnet *dev = netdev_priv(net);
-	int ll_mtu = new_mtu + net->hard_header_len + 4;
-
-	devdbg(dev, "ax88178_change_mtu() new_mtu=%d", new_mtu);
-
-	if (new_mtu <= 0 || ll_mtu > 16384)
-		return -EINVAL;
-
-	if ((ll_mtu % dev->maxpacket) == 0)
-		return -EDOM;
-
-	net->mtu = new_mtu;
-	dev->hard_mtu = net->mtu + net->hard_header_len;
-	ax88178_set_mfb(dev);
-
-	return 0;
-}
-
-static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
-{
-	struct asix_data *data = (struct asix_data *)&dev->data;
-	int ret;
-	void *buf;
-	u16 eeprom;
-	int gpio0 = 0;
-	u32 phyid;
-
-	usbnet_get_endpoints(dev,intf);
-
-	buf = kmalloc(6, GFP_KERNEL);
-	if(!buf) {
-		dbg ("Cannot allocate memory for buffer");
-		ret = -ENOMEM;
-		goto out1;
-	}
-
-	eeprom = 0;
-	asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &eeprom);
-	dbg("GPIO Status: 0x%04x", eeprom);
-
-	asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL);
-	asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom);
-	asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL);
-
-	dbg("EEPROM index 0x17 is 0x%04x", eeprom);
-
-	if (eeprom == 0xffff) {
-		data->phymode = PHY_MODE_MARVELL;
-		data->ledmode = 0;
-		gpio0 = 1;
-	} else {
-		data->phymode = eeprom & 7;
-		data->ledmode = eeprom >> 8;
-		gpio0 = (eeprom & 0x80) ? 0 : 1;
-	}
-	dbg("GPIO0: %d, PhyMode: %d", gpio0, data->phymode);
-
-	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 | AX_GPIO_GPO1EN, 40);
-	if ((eeprom >> 8) != 1) {
-		asix_write_gpio(dev, 0x003c, 30);
-		asix_write_gpio(dev, 0x001c, 300);
-		asix_write_gpio(dev, 0x003c, 30);
-	} else {
-		dbg("gpio phymode == 1 path");
-		asix_write_gpio(dev, AX_GPIO_GPO1EN, 30);
-		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30);
-	}
-
-	asix_sw_reset(dev, 0);
-	msleep(150);
-
-	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD);
-	msleep(150);
-
-	asix_write_rx_ctl(dev, 0);
-
-	/* Get the MAC address */
-	memset(buf, 0, ETH_ALEN);
-	if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
-				0, 0, ETH_ALEN, buf)) < 0) {
-		dbg("Failed to read MAC address: %d", ret);
-		goto out2;
-	}
-	memcpy(dev->net->dev_addr, buf, ETH_ALEN);
-
-	/* Initialize MII structure */
-	dev->mii.dev = dev->net;
-	dev->mii.mdio_read = asix_mdio_read;
-	dev->mii.mdio_write = asix_mdio_write;
-	dev->mii.phy_id_mask = 0x1f;
-	dev->mii.reg_num_mask = 0xff;
-	dev->mii.supports_gmii = 1;
-	dev->net->do_ioctl = asix_ioctl;
-	dev->mii.phy_id = asix_get_phy_addr(dev);
-	dev->net->set_multicast_list = asix_set_multicast;
-	dev->net->ethtool_ops = &ax88178_ethtool_ops;
-	dev->net->change_mtu = &ax88178_change_mtu;
-
-	phyid = asix_get_phyid(dev);
-	dbg("PHYID=0x%08x", phyid);
-
-	if (data->phymode == PHY_MODE_MARVELL) {
-		marvell_phy_init(dev);
-		msleep(60);
-	}
-
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR,
-			BMCR_RESET | BMCR_ANENABLE);
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
-			ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
-	asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
-			ADVERTISE_1000FULL);
-
-	mii_nway_restart(&dev->mii);
-
-	if ((ret = asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT)) < 0)
-		goto out2;
-
-	if ((ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL)) < 0)
-		goto out2;
-
-	kfree(buf);
-
-	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
-	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
-		/* hard_mtu  is still the default - the device does not support
-		   jumbo eth frames */
-		dev->rx_urb_size = 2048;
-	}
-
-	return 0;
-
-out2:
-	kfree(buf);
-out1:
-	return ret;
-}
-
-static const struct driver_info ax8817x_info = {
-	.description = "ASIX AX8817x USB 2.0 Ethernet",
-	.bind = ax88172_bind,
-	.status = asix_status,
-	.link_reset = ax88172_link_reset,
-	.reset = ax88172_link_reset,
-	.flags =  FLAG_ETHER,
-	.data = 0x00130103,
-};
-
-static const struct driver_info dlink_dub_e100_info = {
-	.description = "DLink DUB-E100 USB Ethernet",
-	.bind = ax88172_bind,
-	.status = asix_status,
-	.link_reset = ax88172_link_reset,
-	.reset = ax88172_link_reset,
-	.flags =  FLAG_ETHER,
-	.data = 0x009f9d9f,
-};
-
-static const struct driver_info netgear_fa120_info = {
-	.description = "Netgear FA-120 USB Ethernet",
-	.bind = ax88172_bind,
-	.status = asix_status,
-	.link_reset = ax88172_link_reset,
-	.reset = ax88172_link_reset,
-	.flags =  FLAG_ETHER,
-	.data = 0x00130103,
-};
-
-static const struct driver_info hawking_uf200_info = {
-	.description = "Hawking UF200 USB Ethernet",
-	.bind = ax88172_bind,
-	.status = asix_status,
-	.link_reset = ax88172_link_reset,
-	.reset = ax88172_link_reset,
-	.flags =  FLAG_ETHER,
-	.data = 0x001f1d1f,
-};
-
-static const struct driver_info ax88772_info = {
-	.description = "ASIX AX88772 USB 2.0 Ethernet",
-	.bind = ax88772_bind,
-	.status = asix_status,
-	.link_reset = ax88772_link_reset,
-	.reset = ax88772_link_reset,
-	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
-	.rx_fixup = asix_rx_fixup,
-	.tx_fixup = asix_tx_fixup,
-};
-
-static const struct driver_info ax88178_info = {
-	.description = "ASIX AX88178 USB 2.0 Ethernet",
-	.bind = ax88178_bind,
-	.status = asix_status,
-	.link_reset = ax88178_link_reset,
-	.reset = ax88178_link_reset,
-	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
-	.rx_fixup = asix_rx_fixup,
-	.tx_fixup = asix_tx_fixup,
-};
-
-static const struct usb_device_id	products [] = {
-{
-	// Linksys USB200M
-	USB_DEVICE (0x077b, 0x2226),
-	.driver_info =	(unsigned long) &ax8817x_info,
-}, {
-	// Netgear FA120
-	USB_DEVICE (0x0846, 0x1040),
-	.driver_info =  (unsigned long) &netgear_fa120_info,
-}, {
-	// DLink DUB-E100
-	USB_DEVICE (0x2001, 0x1a00),
-	.driver_info =  (unsigned long) &dlink_dub_e100_info,
-}, {
-	// Intellinet, ST Lab USB Ethernet
-	USB_DEVICE (0x0b95, 0x1720),
-	.driver_info =  (unsigned long) &ax8817x_info,
-}, {
-	// Hawking UF200, TrendNet TU2-ET100
-	USB_DEVICE (0x07b8, 0x420a),
-	.driver_info =  (unsigned long) &hawking_uf200_info,
-}, {
-	// Billionton Systems, USB2AR
-	USB_DEVICE (0x08dd, 0x90ff),
-	.driver_info =  (unsigned long) &ax8817x_info,
-}, {
-	// ATEN UC210T
-	USB_DEVICE (0x0557, 0x2009),
-	.driver_info =  (unsigned long) &ax8817x_info,
-}, {
-	// Buffalo LUA-U2-KTX
-	USB_DEVICE (0x0411, 0x003d),
-	.driver_info =  (unsigned long) &ax8817x_info,
-}, {
-	// Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
-	USB_DEVICE (0x6189, 0x182d),
-	.driver_info =  (unsigned long) &ax8817x_info,
-}, {
-	// corega FEther USB2-TX
-	USB_DEVICE (0x07aa, 0x0017),
-	.driver_info =  (unsigned long) &ax8817x_info,
-}, {
-	// Surecom EP-1427X-2
-	USB_DEVICE (0x1189, 0x0893),
-	.driver_info = (unsigned long) &ax8817x_info,
-}, {
-	// goodway corp usb gwusb2e
-	USB_DEVICE (0x1631, 0x6200),
-	.driver_info = (unsigned long) &ax8817x_info,
-}, {
-	// JVC MP-PRX1 Port Replicator
-	USB_DEVICE (0x04f1, 0x3008),
-	.driver_info = (unsigned long) &ax8817x_info,
-}, {
-	// ASIX AX88772 10/100
-	USB_DEVICE (0x0b95, 0x7720),
-	.driver_info = (unsigned long) &ax88772_info,
-}, {
-	// ASIX AX88178 10/100/1000
-	USB_DEVICE (0x0b95, 0x1780),
-	.driver_info = (unsigned long) &ax88178_info,
-}, {
-	// Linksys USB200M Rev 2
-	USB_DEVICE (0x13b1, 0x0018),
-	.driver_info = (unsigned long) &ax88772_info,
-}, {
-	// 0Q0 cable ethernet
-	USB_DEVICE (0x1557, 0x7720),
-	.driver_info = (unsigned long) &ax88772_info,
-}, {
-	// DLink DUB-E100 H/W Ver B1
-	USB_DEVICE (0x07d1, 0x3c05),
-	.driver_info = (unsigned long) &ax88772_info,
-}, {
-	// DLink DUB-E100 H/W Ver B1 Alternate
-	USB_DEVICE (0x2001, 0x3c05),
-	.driver_info = (unsigned long) &ax88772_info,
-}, {
-	// Linksys USB1000
-	USB_DEVICE (0x1737, 0x0039),
-	.driver_info = (unsigned long) &ax88178_info,
-}, {
-	// IO-DATA ETG-US2
-	USB_DEVICE (0x04bb, 0x0930),
-	.driver_info = (unsigned long) &ax88178_info,
-},
-	{ },		// END
-};
-MODULE_DEVICE_TABLE(usb, products);
-
-static struct usb_driver asix_driver = {
-	.name =		"asix",
-	.id_table =	products,
-	.probe =	usbnet_probe,
-	.suspend =	usbnet_suspend,
-	.resume =	usbnet_resume,
-	.disconnect =	usbnet_disconnect,
-};
-
-static int __init asix_init(void)
-{
- 	return usb_register(&asix_driver);
-}
-module_init(asix_init);
-
-static void __exit asix_exit(void)
-{
- 	usb_deregister(&asix_driver);
-}
-module_exit(asix_exit);
-
-MODULE_AUTHOR("David Hollis");
-MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices");
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/usb/net/catc.c b/drivers/usb/net/catc.c
deleted file mode 100644
index 86e90c59d55..00000000000
--- a/drivers/usb/net/catc.c
+++ /dev/null
@@ -1,963 +0,0 @@
-/*
- *  Copyright (c) 2001 Vojtech Pavlik
- *
- *  CATC EL1210A NetMate USB Ethernet driver
- *
- *  Sponsored by SuSE
- *
- *  Based on the work of
- *		Donald Becker
- * 
- *  Old chipset support added by Simon Evans <spse@secret.org.uk> 2002
- *    - adds support for Belkin F5U011
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or 
- * (at your option) any later version.
- * 
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * 
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- * 
- * Should you need to contact me, the author, you can do so either by
- * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
- * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/ethtool.h>
-#include <linux/crc32.h>
-#include <linux/bitops.h>
-#include <asm/uaccess.h>
-
-#undef DEBUG
-
-#include <linux/usb.h>
-
-/*
- * Version information.
- */
-
-#define DRIVER_VERSION "v2.8"
-#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@suse.cz>"
-#define DRIVER_DESC "CATC EL1210A NetMate USB Ethernet driver"
-#define SHORT_DRIVER_DESC "EL1210A NetMate USB Ethernet"
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-static const char driver_name[] = "catc";
-
-/*
- * Some defines.
- */ 
-
-#define STATS_UPDATE		(HZ)	/* Time between stats updates */
-#define TX_TIMEOUT		(5*HZ)	/* Max time the queue can be stopped */
-#define PKT_SZ			1536	/* Max Ethernet packet size */
-#define RX_MAX_BURST		15	/* Max packets per rx buffer (> 0, < 16) */
-#define TX_MAX_BURST		15	/* Max full sized packets per tx buffer (> 0) */
-#define CTRL_QUEUE		16	/* Max control requests in flight (power of two) */
-#define RX_PKT_SZ		1600	/* Max size of receive packet for F5U011 */
-
-/*
- * Control requests.
- */
-
-enum control_requests {
-	ReadMem =	0xf1,
-	GetMac =	0xf2,
-	Reset =		0xf4,
-	SetMac =	0xf5,
-	SetRxMode =     0xf5,  /* F5U011 only */
-	WriteROM =	0xf8,
-	SetReg =	0xfa,
-	GetReg =	0xfb,
-	WriteMem =	0xfc,
-	ReadROM =	0xfd,
-};
-
-/*
- * Registers.
- */
-
-enum register_offsets {
-	TxBufCount =	0x20,
-	RxBufCount =	0x21,
-	OpModes =	0x22,
-	TxQed =		0x23,
-	RxQed =		0x24,
-	MaxBurst =	0x25,
-	RxUnit =	0x60,
-	EthStatus =	0x61,
-	StationAddr0 =	0x67,
-	EthStats =	0x69,
-	LEDCtrl =	0x81,
-};
-
-enum eth_stats {
-	TxSingleColl =	0x00,
-        TxMultiColl =	0x02,
-        TxExcessColl =	0x04,
-        RxFramErr =	0x06,
-};
-
-enum op_mode_bits {
-	Op3MemWaits =	0x03,
-	OpLenInclude =	0x08,
-	OpRxMerge =	0x10,
-	OpTxMerge =	0x20,
-	OpWin95bugfix =	0x40,
-	OpLoopback =	0x80,
-};
-
-enum rx_filter_bits {
-	RxEnable =	0x01,
-	RxPolarity =	0x02,
-	RxForceOK =	0x04,
-	RxMultiCast =	0x08,
-	RxPromisc =	0x10,
-	AltRxPromisc =  0x20, /* F5U011 uses different bit */
-};
-
-enum led_values {
-	LEDFast = 	0x01,
-	LEDSlow =	0x02,
-	LEDFlash =	0x03,
-	LEDPulse =	0x04,
-	LEDLink =	0x08,
-};
-
-enum link_status {
-	LinkNoChange = 0,
-	LinkGood     = 1,
-	LinkBad      = 2
-};
-
-/*
- * The catc struct.
- */
-
-#define CTRL_RUNNING	0
-#define RX_RUNNING	1
-#define TX_RUNNING	2
-
-struct catc {
-	struct net_device *netdev;
-	struct usb_device *usbdev;
-
-	struct net_device_stats stats;
-	unsigned long flags;
-
-	unsigned int tx_ptr, tx_idx;
-	unsigned int ctrl_head, ctrl_tail;
-	spinlock_t tx_lock, ctrl_lock;
-
-	u8 tx_buf[2][TX_MAX_BURST * (PKT_SZ + 2)];
-	u8 rx_buf[RX_MAX_BURST * (PKT_SZ + 2)];
-	u8 irq_buf[2];
-	u8 ctrl_buf[64];
-	struct usb_ctrlrequest ctrl_dr;
-
-	struct timer_list timer;
-	u8 stats_buf[8];
-	u16 stats_vals[4];
-	unsigned long last_stats;
-
-	u8 multicast[64];
-
-	struct ctrl_queue {
-		u8 dir;
-		u8 request;
-		u16 value;
-		u16 index;
-		void *buf;
-		int len;
-		void (*callback)(struct catc *catc, struct ctrl_queue *q);
-	} ctrl_queue[CTRL_QUEUE];
-
-	struct urb *tx_urb, *rx_urb, *irq_urb, *ctrl_urb;
-
-	u8 is_f5u011;	/* Set if device is an F5U011 */
-	u8 rxmode[2];	/* Used for F5U011 */
-	atomic_t recq_sz; /* Used for F5U011 - counter of waiting rx packets */
-};
-
-/*
- * Useful macros.
- */
-
-#define catc_get_mac(catc, mac)				catc_ctrl_msg(catc, USB_DIR_IN,  GetMac, 0, 0, mac,  6)
-#define catc_reset(catc)				catc_ctrl_msg(catc, USB_DIR_OUT, Reset, 0, 0, NULL, 0)
-#define catc_set_reg(catc, reg, val)			catc_ctrl_msg(catc, USB_DIR_OUT, SetReg, val, reg, NULL, 0)
-#define catc_get_reg(catc, reg, buf)			catc_ctrl_msg(catc, USB_DIR_IN,  GetReg, 0, reg, buf, 1)
-#define catc_write_mem(catc, addr, buf, size)		catc_ctrl_msg(catc, USB_DIR_OUT, WriteMem, 0, addr, buf, size)
-#define catc_read_mem(catc, addr, buf, size)		catc_ctrl_msg(catc, USB_DIR_IN,  ReadMem, 0, addr, buf, size)
-
-#define f5u011_rxmode(catc, rxmode)			catc_ctrl_msg(catc, USB_DIR_OUT, SetRxMode, 0, 1, rxmode, 2)
-#define f5u011_rxmode_async(catc, rxmode)		catc_ctrl_async(catc, USB_DIR_OUT, SetRxMode, 0, 1, &rxmode, 2, NULL)
-#define f5u011_mchash_async(catc, hash)			catc_ctrl_async(catc, USB_DIR_OUT, SetRxMode, 0, 2, &hash, 8, NULL)
-
-#define catc_set_reg_async(catc, reg, val)		catc_ctrl_async(catc, USB_DIR_OUT, SetReg, val, reg, NULL, 0, NULL)
-#define catc_get_reg_async(catc, reg, cb)		catc_ctrl_async(catc, USB_DIR_IN, GetReg, 0, reg, NULL, 1, cb)
-#define catc_write_mem_async(catc, addr, buf, size)	catc_ctrl_async(catc, USB_DIR_OUT, WriteMem, 0, addr, buf, size, NULL)
-
-/*
- * Receive routines.
- */
-
-static void catc_rx_done(struct urb *urb)
-{
-	struct catc *catc = urb->context;
-	u8 *pkt_start = urb->transfer_buffer;
-	struct sk_buff *skb;
-	int pkt_len, pkt_offset = 0;
-
-	if (!catc->is_f5u011) {
-		clear_bit(RX_RUNNING, &catc->flags);
-		pkt_offset = 2;
-	}
-
-	if (urb->status) {
-		dbg("rx_done, status %d, length %d", urb->status, urb->actual_length);
-		return;
-	}
-
-	do {
-		if(!catc->is_f5u011) {
-			pkt_len = le16_to_cpup((__le16*)pkt_start);
-			if (pkt_len > urb->actual_length) {
-				catc->stats.rx_length_errors++;
-				catc->stats.rx_errors++;
-				break;
-			}
-		} else {
-			pkt_len = urb->actual_length;
-		}
-
-		if (!(skb = dev_alloc_skb(pkt_len)))
-			return;
-
-		eth_copy_and_sum(skb, pkt_start + pkt_offset, pkt_len, 0);
-		skb_put(skb, pkt_len);
-
-		skb->protocol = eth_type_trans(skb, catc->netdev);
-		netif_rx(skb);
-
-		catc->stats.rx_packets++;
-		catc->stats.rx_bytes += pkt_len;
-
-		/* F5U011 only does one packet per RX */
-		if (catc->is_f5u011)
-			break;
-		pkt_start += (((pkt_len + 1) >> 6) + 1) << 6;
-
-	} while (pkt_start - (u8 *) urb->transfer_buffer < urb->actual_length);
-
-	catc->netdev->last_rx = jiffies;
-
-	if (catc->is_f5u011) {
-		if (atomic_read(&catc->recq_sz)) {
-			int status;
-			atomic_dec(&catc->recq_sz);
-			dbg("getting extra packet");
-			urb->dev = catc->usbdev;
-			if ((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
-				dbg("submit(rx_urb) status %d", status);
-			}
-		} else {
-			clear_bit(RX_RUNNING, &catc->flags);
-		}
-	}
-}
-
-static void catc_irq_done(struct urb *urb)
-{
-	struct catc *catc = urb->context;
-	u8 *data = urb->transfer_buffer;
-	int status;
-	unsigned int hasdata = 0, linksts = LinkNoChange;
-
-	if (!catc->is_f5u011) {
-		hasdata = data[1] & 0x80;
-		if (data[1] & 0x40)
-			linksts = LinkGood;
-		else if (data[1] & 0x20)
-			linksts = LinkBad;
-	} else {
-		hasdata = (unsigned int)(be16_to_cpup((__be16*)data) & 0x0fff);
-		if (data[0] == 0x90)
-			linksts = LinkGood;
-		else if (data[0] == 0xA0)
-			linksts = LinkBad;
-	}
-
-	switch (urb->status) {
-	case 0:			/* success */
-		break;
-	case -ECONNRESET:	/* unlink */
-	case -ENOENT:
-	case -ESHUTDOWN:
-		return;
-	/* -EPIPE:  should clear the halt */
-	default:		/* error */
-		dbg("irq_done, status %d, data %02x %02x.", urb->status, data[0], data[1]);
-		goto resubmit;
-	}
-
-	if (linksts == LinkGood) {
-		netif_carrier_on(catc->netdev);
-		dbg("link ok");
-	}
-
-	if (linksts == LinkBad) {
-		netif_carrier_off(catc->netdev);
-		dbg("link bad");
-	}
-
-	if (hasdata) {
-		if (test_and_set_bit(RX_RUNNING, &catc->flags)) {
-			if (catc->is_f5u011)
-				atomic_inc(&catc->recq_sz);
-		} else {
-			catc->rx_urb->dev = catc->usbdev;
-			if ((status = usb_submit_urb(catc->rx_urb, GFP_ATOMIC)) < 0) {
-				err("submit(rx_urb) status %d", status);
-			}
-		} 
-	}
-resubmit:
-	status = usb_submit_urb (urb, GFP_ATOMIC);
-	if (status)
-		err ("can't resubmit intr, %s-%s, status %d",
-				catc->usbdev->bus->bus_name,
-				catc->usbdev->devpath, status);
-}
-
-/*
- * Transmit routines.
- */
-
-static int catc_tx_run(struct catc *catc)
-{
-	int status;
-
-	if (catc->is_f5u011)
-		catc->tx_ptr = (catc->tx_ptr + 63) & ~63;
-
-	catc->tx_urb->transfer_buffer_length = catc->tx_ptr;
-	catc->tx_urb->transfer_buffer = catc->tx_buf[catc->tx_idx];
-	catc->tx_urb->dev = catc->usbdev;
-
-	if ((status = usb_submit_urb(catc->tx_urb, GFP_ATOMIC)) < 0)
-		err("submit(tx_urb), status %d", status);
-
-	catc->tx_idx = !catc->tx_idx;
-	catc->tx_ptr = 0;
-
-	catc->netdev->trans_start = jiffies;
-	return status;
-}
-
-static void catc_tx_done(struct urb *urb)
-{
-	struct catc *catc = urb->context;
-	unsigned long flags;
-	int r;
-
-	if (urb->status == -ECONNRESET) {
-		dbg("Tx Reset.");
-		urb->status = 0;
-		catc->netdev->trans_start = jiffies;
-		catc->stats.tx_errors++;
-		clear_bit(TX_RUNNING, &catc->flags);
-		netif_wake_queue(catc->netdev);
-		return;
-	}
-
-	if (urb->status) {
-		dbg("tx_done, status %d, length %d", urb->status, urb->actual_length);
-		return;
-	}
-
-	spin_lock_irqsave(&catc->tx_lock, flags);
-
-	if (catc->tx_ptr) {
-		r = catc_tx_run(catc);
-		if (unlikely(r < 0))
-			clear_bit(TX_RUNNING, &catc->flags);
-	} else {
-		clear_bit(TX_RUNNING, &catc->flags);
-	}
-
-	netif_wake_queue(catc->netdev);
-
-	spin_unlock_irqrestore(&catc->tx_lock, flags);
-}
-
-static int catc_hard_start_xmit(struct sk_buff *skb, struct net_device *netdev)
-{
-	struct catc *catc = netdev_priv(netdev);
-	unsigned long flags;
-	int r = 0;
-	char *tx_buf;
-
-	spin_lock_irqsave(&catc->tx_lock, flags);
-
-	catc->tx_ptr = (((catc->tx_ptr - 1) >> 6) + 1) << 6;
-	tx_buf = catc->tx_buf[catc->tx_idx] + catc->tx_ptr;
-	*((u16*)tx_buf) = (catc->is_f5u011) ? cpu_to_be16((u16)skb->len) : cpu_to_le16((u16)skb->len);
-	skb_copy_from_linear_data(skb, tx_buf + 2, skb->len);
-	catc->tx_ptr += skb->len + 2;
-
-	if (!test_and_set_bit(TX_RUNNING, &catc->flags)) {
-		r = catc_tx_run(catc);
-		if (r < 0)
-			clear_bit(TX_RUNNING, &catc->flags);
-	}
-
-	if ((catc->is_f5u011 && catc->tx_ptr)
-	     || (catc->tx_ptr >= ((TX_MAX_BURST - 1) * (PKT_SZ + 2))))
-		netif_stop_queue(netdev);
-
-	spin_unlock_irqrestore(&catc->tx_lock, flags);
-
-	if (r >= 0) {
-		catc->stats.tx_bytes += skb->len;
-		catc->stats.tx_packets++;
-	}
-
-	dev_kfree_skb(skb);
-
-	return 0;
-}
-
-static void catc_tx_timeout(struct net_device *netdev)
-{
-	struct catc *catc = netdev_priv(netdev);
-
-	warn("Transmit timed out.");
-	usb_unlink_urb(catc->tx_urb);
-}
-
-/*
- * Control messages.
- */
-
-static int catc_ctrl_msg(struct catc *catc, u8 dir, u8 request, u16 value, u16 index, void *buf, int len)
-{
-        int retval = usb_control_msg(catc->usbdev,
-		dir ? usb_rcvctrlpipe(catc->usbdev, 0) : usb_sndctrlpipe(catc->usbdev, 0),
-		 request, 0x40 | dir, value, index, buf, len, 1000);
-        return retval < 0 ? retval : 0;
-}
-
-static void catc_ctrl_run(struct catc *catc)
-{
-	struct ctrl_queue *q = catc->ctrl_queue + catc->ctrl_tail;
-	struct usb_device *usbdev = catc->usbdev;
-	struct urb *urb = catc->ctrl_urb;
-	struct usb_ctrlrequest *dr = &catc->ctrl_dr;
-	int status;
-
-	dr->bRequest = q->request;
-	dr->bRequestType = 0x40 | q->dir;
-	dr->wValue = cpu_to_le16(q->value);
-	dr->wIndex = cpu_to_le16(q->index);
-	dr->wLength = cpu_to_le16(q->len);
-
-        urb->pipe = q->dir ? usb_rcvctrlpipe(usbdev, 0) : usb_sndctrlpipe(usbdev, 0);
-	urb->transfer_buffer_length = q->len;
-	urb->transfer_buffer = catc->ctrl_buf;
-	urb->setup_packet = (void *) dr;
-	urb->dev = usbdev;
-
-	if (!q->dir && q->buf && q->len)
-		memcpy(catc->ctrl_buf, q->buf, q->len);
-
-	if ((status = usb_submit_urb(catc->ctrl_urb, GFP_KERNEL)))
-		err("submit(ctrl_urb) status %d", status);
-}
-
-static void catc_ctrl_done(struct urb *urb)
-{
-	struct catc *catc = urb->context;
-	struct ctrl_queue *q;
-	unsigned long flags;
-
-	if (urb->status)
-		dbg("ctrl_done, status %d, len %d.", urb->status, urb->actual_length);
-
-	spin_lock_irqsave(&catc->ctrl_lock, flags);
-
-	q = catc->ctrl_queue + catc->ctrl_tail;
-
-	if (q->dir) {
-		if (q->buf && q->len)
-			memcpy(q->buf, catc->ctrl_buf, q->len);
-		else
-			q->buf = catc->ctrl_buf;
-	}
-
-	if (q->callback)
-		q->callback(catc, q);
-
-	catc->ctrl_tail = (catc->ctrl_tail + 1) & (CTRL_QUEUE - 1);
-
-	if (catc->ctrl_head != catc->ctrl_tail)
-		catc_ctrl_run(catc);
-	else
-		clear_bit(CTRL_RUNNING, &catc->flags);
-
-	spin_unlock_irqrestore(&catc->ctrl_lock, flags);
-}
-
-static int catc_ctrl_async(struct catc *catc, u8 dir, u8 request, u16 value,
-	u16 index, void *buf, int len, void (*callback)(struct catc *catc, struct ctrl_queue *q))
-{
-	struct ctrl_queue *q;
-	int retval = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&catc->ctrl_lock, flags);
-	
-	q = catc->ctrl_queue + catc->ctrl_head;
-
-	q->dir = dir;
-	q->request = request;
-	q->value = value;
-	q->index = index;
-	q->buf = buf;
-	q->len = len;
-	q->callback = callback;
-
-	catc->ctrl_head = (catc->ctrl_head + 1) & (CTRL_QUEUE - 1);
-
-	if (catc->ctrl_head == catc->ctrl_tail) {
-		err("ctrl queue full");
-		catc->ctrl_tail = (catc->ctrl_tail + 1) & (CTRL_QUEUE - 1);
-		retval = -1;
-	}
-
-	if (!test_and_set_bit(CTRL_RUNNING, &catc->flags))
-		catc_ctrl_run(catc);
-
-	spin_unlock_irqrestore(&catc->ctrl_lock, flags);
-
-	return retval;
-}
-
-/*
- * Statistics.
- */
-
-static void catc_stats_done(struct catc *catc, struct ctrl_queue *q)
-{
-	int index = q->index - EthStats;
-	u16 data, last;
-
-	catc->stats_buf[index] = *((char *)q->buf);
-
-	if (index & 1)
-		return;
-
-	data = ((u16)catc->stats_buf[index] << 8) | catc->stats_buf[index + 1];
-	last = catc->stats_vals[index >> 1];
-
-	switch (index) {
-		case TxSingleColl:
-		case TxMultiColl:
-			catc->stats.collisions += data - last;
-			break;
-		case TxExcessColl:
-			catc->stats.tx_aborted_errors += data - last;
-			catc->stats.tx_errors += data - last;
-			break;
-		case RxFramErr:
-			catc->stats.rx_frame_errors += data - last;
-			catc->stats.rx_errors += data - last;
-			break;
-	}
-
-	catc->stats_vals[index >> 1] = data;
-}
-
-static void catc_stats_timer(unsigned long data)
-{
-	struct catc *catc = (void *) data;
-	int i;
-
-	for (i = 0; i < 8; i++)
-		catc_get_reg_async(catc, EthStats + 7 - i, catc_stats_done);
-
-	mod_timer(&catc->timer, jiffies + STATS_UPDATE);
-}
-
-static struct net_device_stats *catc_get_stats(struct net_device *netdev)
-{
-	struct catc *catc = netdev_priv(netdev);
-	return &catc->stats;
-}
-
-/*
- * Receive modes. Broadcast, Multicast, Promisc.
- */
-
-static void catc_multicast(unsigned char *addr, u8 *multicast)
-{
-	u32 crc;
-
-	crc = ether_crc_le(6, addr);
-	multicast[(crc >> 3) & 0x3f] |= 1 << (crc & 7);
-}
-
-static void catc_set_multicast_list(struct net_device *netdev)
-{
-	struct catc *catc = netdev_priv(netdev);
-	struct dev_mc_list *mc;
-	u8 broadcast[6];
-	u8 rx = RxEnable | RxPolarity | RxMultiCast;
-	int i;
-
-	memset(broadcast, 0xff, 6);
-	memset(catc->multicast, 0, 64);
-
-	catc_multicast(broadcast, catc->multicast);
-	catc_multicast(netdev->dev_addr, catc->multicast);
-
-	if (netdev->flags & IFF_PROMISC) {
-		memset(catc->multicast, 0xff, 64);
-		rx |= (!catc->is_f5u011) ? RxPromisc : AltRxPromisc;
-	} 
-
-	if (netdev->flags & IFF_ALLMULTI) {
-		memset(catc->multicast, 0xff, 64);
-	} else {
-		for (i = 0, mc = netdev->mc_list; mc && i < netdev->mc_count; i++, mc = mc->next) {
-			u32 crc = ether_crc_le(6, mc->dmi_addr);
-			if (!catc->is_f5u011) {
-				catc->multicast[(crc >> 3) & 0x3f] |= 1 << (crc & 7);
-			} else {
-				catc->multicast[7-(crc >> 29)] |= 1 << ((crc >> 26) & 7);
-			}
-		}
-	}
-	if (!catc->is_f5u011) {
-		catc_set_reg_async(catc, RxUnit, rx);
-		catc_write_mem_async(catc, 0xfa80, catc->multicast, 64);
-	} else {
-		f5u011_mchash_async(catc, catc->multicast);
-		if (catc->rxmode[0] != rx) {
-			catc->rxmode[0] = rx;
-			dbg("Setting RX mode to %2.2X %2.2X", catc->rxmode[0], catc->rxmode[1]);
-			f5u011_rxmode_async(catc, catc->rxmode);
-		}
-	}
-}
-
-static void catc_get_drvinfo(struct net_device *dev,
-			     struct ethtool_drvinfo *info)
-{
-	struct catc *catc = netdev_priv(dev);
-	strncpy(info->driver, driver_name, ETHTOOL_BUSINFO_LEN);
-	strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN);
-	usb_make_path (catc->usbdev, info->bus_info, sizeof info->bus_info);
-}
-
-static int catc_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
-	struct catc *catc = netdev_priv(dev);
-	if (!catc->is_f5u011)
-		return -EOPNOTSUPP;
-
-	cmd->supported = SUPPORTED_10baseT_Half | SUPPORTED_TP;
-	cmd->advertising = ADVERTISED_10baseT_Half | ADVERTISED_TP;
-	cmd->speed = SPEED_10;
-	cmd->duplex = DUPLEX_HALF;
-	cmd->port = PORT_TP; 
-	cmd->phy_address = 0;
-	cmd->transceiver = XCVR_INTERNAL;
-	cmd->autoneg = AUTONEG_DISABLE;
-	cmd->maxtxpkt = 1;
-	cmd->maxrxpkt = 1;
-	return 0;
-}
-
-static struct ethtool_ops ops = {
-	.get_drvinfo = catc_get_drvinfo,
-	.get_settings = catc_get_settings,
-	.get_link = ethtool_op_get_link
-};
-
-/*
- * Open, close.
- */
-
-static int catc_open(struct net_device *netdev)
-{
-	struct catc *catc = netdev_priv(netdev);
-	int status;
-
-	catc->irq_urb->dev = catc->usbdev;
-	if ((status = usb_submit_urb(catc->irq_urb, GFP_KERNEL)) < 0) {
-		err("submit(irq_urb) status %d", status);
-		return -1;
-	}
-
-	netif_start_queue(netdev);
-
-	if (!catc->is_f5u011)
-		mod_timer(&catc->timer, jiffies + STATS_UPDATE);
-
-	return 0;
-}
-
-static int catc_stop(struct net_device *netdev)
-{
-	struct catc *catc = netdev_priv(netdev);
-
-	netif_stop_queue(netdev);
-
-	if (!catc->is_f5u011)
-		del_timer_sync(&catc->timer);
-
-	usb_kill_urb(catc->rx_urb);
-	usb_kill_urb(catc->tx_urb);
-	usb_kill_urb(catc->irq_urb);
-	usb_kill_urb(catc->ctrl_urb);
-
-	return 0;
-}
-
-/*
- * USB probe, disconnect.
- */
-
-static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct usb_device *usbdev = interface_to_usbdev(intf);
-	struct net_device *netdev;
-	struct catc *catc;
-	u8 broadcast[6];
-	int i, pktsz;
-
-	if (usb_set_interface(usbdev,
-			intf->altsetting->desc.bInterfaceNumber, 1)) {
-                err("Can't set altsetting 1.");
-		return -EIO;
-	}
-
-	netdev = alloc_etherdev(sizeof(struct catc));
-	if (!netdev)
-		return -ENOMEM;
-
-	catc = netdev_priv(netdev);
-
-	netdev->open = catc_open;
-	netdev->hard_start_xmit = catc_hard_start_xmit;
-	netdev->stop = catc_stop;
-	netdev->get_stats = catc_get_stats;
-	netdev->tx_timeout = catc_tx_timeout;
-	netdev->watchdog_timeo = TX_TIMEOUT;
-	netdev->set_multicast_list = catc_set_multicast_list;
-	SET_ETHTOOL_OPS(netdev, &ops);
-
-	catc->usbdev = usbdev;
-	catc->netdev = netdev;
-
-	spin_lock_init(&catc->tx_lock);
-	spin_lock_init(&catc->ctrl_lock);
-
-	init_timer(&catc->timer);
-	catc->timer.data = (long) catc;
-	catc->timer.function = catc_stats_timer;
-
-	catc->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
-	catc->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	catc->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	catc->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if ((!catc->ctrl_urb) || (!catc->tx_urb) || 
-	    (!catc->rx_urb) || (!catc->irq_urb)) {
-		err("No free urbs available.");
-		usb_free_urb(catc->ctrl_urb);
-		usb_free_urb(catc->tx_urb);
-		usb_free_urb(catc->rx_urb);
-		usb_free_urb(catc->irq_urb);
-		free_netdev(netdev);
-		return -ENOMEM;
-	}
-
-	/* The F5U011 has the same vendor/product as the netmate but a device version of 0x130 */
-	if (le16_to_cpu(usbdev->descriptor.idVendor) == 0x0423 && 
-	    le16_to_cpu(usbdev->descriptor.idProduct) == 0xa &&
-	    le16_to_cpu(catc->usbdev->descriptor.bcdDevice) == 0x0130) {
-		dbg("Testing for f5u011");
-		catc->is_f5u011 = 1;		
-		atomic_set(&catc->recq_sz, 0);
-		pktsz = RX_PKT_SZ;
-	} else {
-		pktsz = RX_MAX_BURST * (PKT_SZ + 2);
-	}
-	
-	usb_fill_control_urb(catc->ctrl_urb, usbdev, usb_sndctrlpipe(usbdev, 0),
-		NULL, NULL, 0, catc_ctrl_done, catc);
-
-	usb_fill_bulk_urb(catc->tx_urb, usbdev, usb_sndbulkpipe(usbdev, 1),
-		NULL, 0, catc_tx_done, catc);
-
-	usb_fill_bulk_urb(catc->rx_urb, usbdev, usb_rcvbulkpipe(usbdev, 1),
-		catc->rx_buf, pktsz, catc_rx_done, catc);
-
-	usb_fill_int_urb(catc->irq_urb, usbdev, usb_rcvintpipe(usbdev, 2),
-                catc->irq_buf, 2, catc_irq_done, catc, 1);
-
-	if (!catc->is_f5u011) {
-		dbg("Checking memory size\n");
-
-		i = 0x12345678;
-		catc_write_mem(catc, 0x7a80, &i, 4);
-		i = 0x87654321;	
-		catc_write_mem(catc, 0xfa80, &i, 4);
-		catc_read_mem(catc, 0x7a80, &i, 4);
-	  
-		switch (i) {
-		case 0x12345678:
-			catc_set_reg(catc, TxBufCount, 8);
-			catc_set_reg(catc, RxBufCount, 32);
-			dbg("64k Memory\n");
-			break;
-		default:
-			warn("Couldn't detect memory size, assuming 32k");
-		case 0x87654321:
-			catc_set_reg(catc, TxBufCount, 4);
-			catc_set_reg(catc, RxBufCount, 16);
-			dbg("32k Memory\n");
-			break;
-		}
-	  
-		dbg("Getting MAC from SEEROM.");
-	  
-		catc_get_mac(catc, netdev->dev_addr);
-		
-		dbg("Setting MAC into registers.");
-	  
-		for (i = 0; i < 6; i++)
-			catc_set_reg(catc, StationAddr0 - i, netdev->dev_addr[i]);
-		
-		dbg("Filling the multicast list.");
-	  
-		memset(broadcast, 0xff, 6);
-		catc_multicast(broadcast, catc->multicast);
-		catc_multicast(netdev->dev_addr, catc->multicast);
-		catc_write_mem(catc, 0xfa80, catc->multicast, 64);
-		
-		dbg("Clearing error counters.");
-		
-		for (i = 0; i < 8; i++)
-			catc_set_reg(catc, EthStats + i, 0);
-		catc->last_stats = jiffies;
-		
-		dbg("Enabling.");
-		
-		catc_set_reg(catc, MaxBurst, RX_MAX_BURST);
-		catc_set_reg(catc, OpModes, OpTxMerge | OpRxMerge | OpLenInclude | Op3MemWaits);
-		catc_set_reg(catc, LEDCtrl, LEDLink);
-		catc_set_reg(catc, RxUnit, RxEnable | RxPolarity | RxMultiCast);
-	} else {
-		dbg("Performing reset\n");
-		catc_reset(catc);
-		catc_get_mac(catc, netdev->dev_addr);
-		
-		dbg("Setting RX Mode");
-		catc->rxmode[0] = RxEnable | RxPolarity | RxMultiCast;
-		catc->rxmode[1] = 0;
-		f5u011_rxmode(catc, catc->rxmode);
-	}
-	dbg("Init done.");
-	printk(KERN_INFO "%s: %s USB Ethernet at usb-%s-%s, ",
-	       netdev->name, (catc->is_f5u011) ? "Belkin F5U011" : "CATC EL1210A NetMate",
-	       usbdev->bus->bus_name, usbdev->devpath);
-	for (i = 0; i < 5; i++) printk("%2.2x:", netdev->dev_addr[i]);
-	printk("%2.2x.\n", netdev->dev_addr[i]);
-	usb_set_intfdata(intf, catc);
-
-	SET_NETDEV_DEV(netdev, &intf->dev);
-	if (register_netdev(netdev) != 0) {
-		usb_set_intfdata(intf, NULL);
-		usb_free_urb(catc->ctrl_urb);
-		usb_free_urb(catc->tx_urb);
-		usb_free_urb(catc->rx_urb);
-		usb_free_urb(catc->irq_urb);
-		free_netdev(netdev);
-		return -EIO;
-	}
-	return 0;
-}
-
-static void catc_disconnect(struct usb_interface *intf)
-{
-	struct catc *catc = usb_get_intfdata(intf);
-
-	usb_set_intfdata(intf, NULL);
-	if (catc) {
-		unregister_netdev(catc->netdev);
-		usb_free_urb(catc->ctrl_urb);
-		usb_free_urb(catc->tx_urb);
-		usb_free_urb(catc->rx_urb);
-		usb_free_urb(catc->irq_urb);
-		free_netdev(catc->netdev);
-	}
-}
-
-/*
- * Module functions and tables.
- */
-
-static struct usb_device_id catc_id_table [] = {
-	{ USB_DEVICE(0x0423, 0xa) },	/* CATC Netmate, Belkin F5U011 */
-	{ USB_DEVICE(0x0423, 0xc) },	/* CATC Netmate II, Belkin F5U111 */
-	{ USB_DEVICE(0x08d1, 0x1) },	/* smartBridges smartNIC */
-	{ }
-};
-
-MODULE_DEVICE_TABLE(usb, catc_id_table);
-
-static struct usb_driver catc_driver = {
-	.name =		driver_name,
-	.probe =	catc_probe,
-	.disconnect =	catc_disconnect,
-	.id_table =	catc_id_table,
-};
-
-static int __init catc_init(void)
-{
-	int result = usb_register(&catc_driver);
-	if (result == 0)
-		info(DRIVER_VERSION " " DRIVER_DESC);
-	return result;
-}
-
-static void __exit catc_exit(void)
-{
-	usb_deregister(&catc_driver);
-}
-
-module_init(catc_init);
-module_exit(catc_exit);
diff --git a/drivers/usb/net/cdc_ether.c b/drivers/usb/net/cdc_ether.c
deleted file mode 100644
index 5a21f06bf8a..00000000000
--- a/drivers/usb/net/cdc_ether.c
+++ /dev/null
@@ -1,570 +0,0 @@
-/*
- * CDC Ethernet based networking peripherals
- * Copyright (C) 2003-2005 by David Brownell
- * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-// #define	DEBUG			// error path messages, extra info
-// #define	VERBOSE			// more; success messages
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ctype.h>
-#include <linux/ethtool.h>
-#include <linux/workqueue.h>
-#include <linux/mii.h>
-#include <linux/usb.h>
-#include <linux/usb/cdc.h>
-
-#include "usbnet.h"
-
-
-#if defined(CONFIG_USB_NET_RNDIS_HOST) || defined(CONFIG_USB_NET_RNDIS_HOST_MODULE)
-
-static int is_rndis(struct usb_interface_descriptor *desc)
-{
-	return desc->bInterfaceClass == USB_CLASS_COMM
-		&& desc->bInterfaceSubClass == 2
-		&& desc->bInterfaceProtocol == 0xff;
-}
-
-static int is_activesync(struct usb_interface_descriptor *desc)
-{
-	return desc->bInterfaceClass == USB_CLASS_MISC
-		&& desc->bInterfaceSubClass == 1
-		&& desc->bInterfaceProtocol == 1;
-}
-
-#else
-
-#define is_rndis(desc)		0
-#define is_activesync(desc)	0
-
-#endif
-
-/*
- * probes control interface, claims data interface, collects the bulk
- * endpoints, activates data interface (if needed), maybe sets MTU.
- * all pure cdc, except for certain firmware workarounds, and knowing
- * that rndis uses one different rule.
- */
-int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
-{
-	u8				*buf = intf->cur_altsetting->extra;
-	int				len = intf->cur_altsetting->extralen;
-	struct usb_interface_descriptor	*d;
-	struct cdc_state		*info = (void *) &dev->data;
-	int				status;
-	int				rndis;
-	struct usb_driver		*driver = driver_of(intf);
-
-	if (sizeof dev->data < sizeof *info)
-		return -EDOM;
-
-	/* expect strict spec conformance for the descriptors, but
-	 * cope with firmware which stores them in the wrong place
-	 */
-	if (len == 0 && dev->udev->actconfig->extralen) {
-		/* Motorola SB4100 (and others: Brad Hards says it's
-		 * from a Broadcom design) put CDC descriptors here
-		 */
-		buf = dev->udev->actconfig->extra;
-		len = dev->udev->actconfig->extralen;
-		if (len)
-			dev_dbg(&intf->dev,
-				"CDC descriptors on config\n");
-	}
-
-	/* this assumes that if there's a non-RNDIS vendor variant
-	 * of cdc-acm, it'll fail RNDIS requests cleanly.
-	 */
-	rndis = is_rndis(&intf->cur_altsetting->desc)
-		|| is_activesync(&intf->cur_altsetting->desc);
-
-	memset(info, 0, sizeof *info);
-	info->control = intf;
-	while (len > 3) {
-		if (buf [1] != USB_DT_CS_INTERFACE)
-			goto next_desc;
-
-		/* use bDescriptorSubType to identify the CDC descriptors.
-		 * We expect devices with CDC header and union descriptors.
-		 * For CDC Ethernet we need the ethernet descriptor.
-		 * For RNDIS, ignore two (pointless) CDC modem descriptors
-		 * in favor of a complicated OID-based RPC scheme doing what
-		 * CDC Ethernet achieves with a simple descriptor.
-		 */
-		switch (buf [2]) {
-		case USB_CDC_HEADER_TYPE:
-			if (info->header) {
-				dev_dbg(&intf->dev, "extra CDC header\n");
-				goto bad_desc;
-			}
-			info->header = (void *) buf;
-			if (info->header->bLength != sizeof *info->header) {
-				dev_dbg(&intf->dev, "CDC header len %u\n",
-					info->header->bLength);
-				goto bad_desc;
-			}
-			break;
-		case USB_CDC_ACM_TYPE:
-			/* paranoia:  disambiguate a "real" vendor-specific
-			 * modem interface from an RNDIS non-modem.
-			 */
-			if (rndis) {
-				struct usb_cdc_acm_descriptor *d;
-
-				d = (void *) buf;
-				if (d->bmCapabilities) {
-					dev_dbg(&intf->dev,
-						"ACM capabilities %02x, "
-						"not really RNDIS?\n",
-						d->bmCapabilities);
-					goto bad_desc;
-				}
-			}
-			break;
-		case USB_CDC_UNION_TYPE:
-			if (info->u) {
-				dev_dbg(&intf->dev, "extra CDC union\n");
-				goto bad_desc;
-			}
-			info->u = (void *) buf;
-			if (info->u->bLength != sizeof *info->u) {
-				dev_dbg(&intf->dev, "CDC union len %u\n",
-					info->u->bLength);
-				goto bad_desc;
-			}
-
-			/* we need a master/control interface (what we're
-			 * probed with) and a slave/data interface; union
-			 * descriptors sort this all out.
-			 */
-			info->control = usb_ifnum_to_if(dev->udev,
-						info->u->bMasterInterface0);
-			info->data = usb_ifnum_to_if(dev->udev,
-						info->u->bSlaveInterface0);
-			if (!info->control || !info->data) {
-				dev_dbg(&intf->dev,
-					"master #%u/%p slave #%u/%p\n",
-					info->u->bMasterInterface0,
-					info->control,
-					info->u->bSlaveInterface0,
-					info->data);
-				goto bad_desc;
-			}
-			if (info->control != intf) {
-				dev_dbg(&intf->dev, "bogus CDC Union\n");
-				/* Ambit USB Cable Modem (and maybe others)
-				 * interchanges master and slave interface.
-				 */
-				if (info->data == intf) {
-					info->data = info->control;
-					info->control = intf;
-				} else
-					goto bad_desc;
-			}
-
-			/* a data interface altsetting does the real i/o */
-			d = &info->data->cur_altsetting->desc;
-			if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
-				dev_dbg(&intf->dev, "slave class %u\n",
-					d->bInterfaceClass);
-				goto bad_desc;
-			}
-			break;
-		case USB_CDC_ETHERNET_TYPE:
-			if (info->ether) {
-				dev_dbg(&intf->dev, "extra CDC ether\n");
-				goto bad_desc;
-			}
-			info->ether = (void *) buf;
-			if (info->ether->bLength != sizeof *info->ether) {
-				dev_dbg(&intf->dev, "CDC ether len %u\n",
-					info->ether->bLength);
-				goto bad_desc;
-			}
-			dev->hard_mtu = le16_to_cpu(
-						info->ether->wMaxSegmentSize);
-			/* because of Zaurus, we may be ignoring the host
-			 * side link address we were given.
-			 */
-			break;
-		}
-next_desc:
-		len -= buf [0];	/* bLength */
-		buf += buf [0];
-	}
-
-	/* Microsoft ActiveSync based RNDIS devices lack the CDC descriptors,
-	 * so we'll hard-wire the interfaces and not check for descriptors.
-	 */
-	if (is_activesync(&intf->cur_altsetting->desc) && !info->u) {
-		info->control = usb_ifnum_to_if(dev->udev, 0);
-		info->data = usb_ifnum_to_if(dev->udev, 1);
-		if (!info->control || !info->data) {
-			dev_dbg(&intf->dev,
-				"activesync: master #0/%p slave #1/%p\n",
-				info->control,
-				info->data);
-			goto bad_desc;
-		}
-
-	} else if (!info->header || !info->u || (!rndis && !info->ether)) {
-		dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
-			info->header ? "" : "header ",
-			info->u ? "" : "union ",
-			info->ether ? "" : "ether ");
-		goto bad_desc;
-	}
-
-	/* claim data interface and set it up ... with side effects.
-	 * network traffic can't flow until an altsetting is enabled.
-	 */
-	status = usb_driver_claim_interface(driver, info->data, dev);
-	if (status < 0)
-		return status;
-	status = usbnet_get_endpoints(dev, info->data);
-	if (status < 0) {
-		/* ensure immediate exit from usbnet_disconnect */
-		usb_set_intfdata(info->data, NULL);
-		usb_driver_release_interface(driver, info->data);
-		return status;
-	}
-
-	/* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
-	dev->status = NULL;
-	if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
-		struct usb_endpoint_descriptor	*desc;
-
-		dev->status = &info->control->cur_altsetting->endpoint [0];
-		desc = &dev->status->desc;
-		if (!usb_endpoint_is_int_in(desc)
-				|| (le16_to_cpu(desc->wMaxPacketSize)
-					< sizeof(struct usb_cdc_notification))
-				|| !desc->bInterval) {
-			dev_dbg(&intf->dev, "bad notification endpoint\n");
-			dev->status = NULL;
-		}
-	}
-	if (rndis && !dev->status) {
-		dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
-		usb_set_intfdata(info->data, NULL);
-		usb_driver_release_interface(driver, info->data);
-		return -ENODEV;
-	}
-	return 0;
-
-bad_desc:
-	dev_info(&dev->udev->dev, "bad CDC descriptors\n");
-	return -ENODEV;
-}
-EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
-
-void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
-{
-	struct cdc_state		*info = (void *) &dev->data;
-	struct usb_driver		*driver = driver_of(intf);
-
-	/* disconnect master --> disconnect slave */
-	if (intf == info->control && info->data) {
-		/* ensure immediate exit from usbnet_disconnect */
-		usb_set_intfdata(info->data, NULL);
-		usb_driver_release_interface(driver, info->data);
-		info->data = NULL;
-	}
-
-	/* and vice versa (just in case) */
-	else if (intf == info->data && info->control) {
-		/* ensure immediate exit from usbnet_disconnect */
-		usb_set_intfdata(info->control, NULL);
-		usb_driver_release_interface(driver, info->control);
-		info->control = NULL;
-	}
-}
-EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
-
-
-/*-------------------------------------------------------------------------
- *
- * Communications Device Class, Ethernet Control model
- *
- * Takes two interfaces.  The DATA interface is inactive till an altsetting
- * is selected.  Configuration data includes class descriptors.  There's
- * an optional status endpoint on the control interface.
- *
- * This should interop with whatever the 2.4 "CDCEther.c" driver
- * (by Brad Hards) talked with, with more functionality.
- *
- *-------------------------------------------------------------------------*/
-
-static void dumpspeed(struct usbnet *dev, __le32 *speeds)
-{
-	if (netif_msg_timer(dev))
-		devinfo(dev, "link speeds: %u kbps up, %u kbps down",
-			__le32_to_cpu(speeds[0]) / 1000,
-		__le32_to_cpu(speeds[1]) / 1000);
-}
-
-static void cdc_status(struct usbnet *dev, struct urb *urb)
-{
-	struct usb_cdc_notification	*event;
-
-	if (urb->actual_length < sizeof *event)
-		return;
-
-	/* SPEED_CHANGE can get split into two 8-byte packets */
-	if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
-		dumpspeed(dev, (__le32 *) urb->transfer_buffer);
-		return;
-	}
-
-	event = urb->transfer_buffer;
-	switch (event->bNotificationType) {
-	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
-		if (netif_msg_timer(dev))
-			devdbg(dev, "CDC: carrier %s",
-					event->wValue ? "on" : "off");
-		if (event->wValue)
-			netif_carrier_on(dev->net);
-		else
-			netif_carrier_off(dev->net);
-		break;
-	case USB_CDC_NOTIFY_SPEED_CHANGE:	/* tx/rx rates */
-		if (netif_msg_timer(dev))
-			devdbg(dev, "CDC: speed change (len %d)",
-					urb->actual_length);
-		if (urb->actual_length != (sizeof *event + 8))
-			set_bit(EVENT_STS_SPLIT, &dev->flags);
-		else
-			dumpspeed(dev, (__le32 *) &event[1]);
-		break;
-	/* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
-	 * but there are no standard formats for the response data.
-	 */
-	default:
-		deverr(dev, "CDC: unexpected notification %02x!",
-				 event->bNotificationType);
-		break;
-	}
-}
-
-static u8 nibble(unsigned char c)
-{
-	if (likely(isdigit(c)))
-		return c - '0';
-	c = toupper(c);
-	if (likely(isxdigit(c)))
-		return 10 + c - 'A';
-	return 0;
-}
-
-static inline int
-get_ethernet_addr(struct usbnet *dev, struct usb_cdc_ether_desc *e)
-{
-	int 		tmp, i;
-	unsigned char	buf [13];
-
-	tmp = usb_string(dev->udev, e->iMACAddress, buf, sizeof buf);
-	if (tmp != 12) {
-		dev_dbg(&dev->udev->dev,
-			"bad MAC string %d fetch, %d\n", e->iMACAddress, tmp);
-		if (tmp >= 0)
-			tmp = -EINVAL;
-		return tmp;
-	}
-	for (i = tmp = 0; i < 6; i++, tmp += 2)
-		dev->net->dev_addr [i] =
-			(nibble(buf [tmp]) << 4) + nibble(buf [tmp + 1]);
-	return 0;
-}
-
-static int cdc_bind(struct usbnet *dev, struct usb_interface *intf)
-{
-	int				status;
-	struct cdc_state		*info = (void *) &dev->data;
-
-	status = usbnet_generic_cdc_bind(dev, intf);
-	if (status < 0)
-		return status;
-
-	status = get_ethernet_addr(dev, info->ether);
-	if (status < 0) {
-		usb_set_intfdata(info->data, NULL);
-		usb_driver_release_interface(driver_of(intf), info->data);
-		return status;
-	}
-
-	/* FIXME cdc-ether has some multicast code too, though it complains
-	 * in routine cases.  info->ether describes the multicast support.
-	 * Implement that here, manipulating the cdc filter as needed.
-	 */
-	return 0;
-}
-
-static const struct driver_info	cdc_info = {
-	.description =	"CDC Ethernet Device",
-	.flags =	FLAG_ETHER,
-	// .check_connect = cdc_check_connect,
-	.bind =		cdc_bind,
-	.unbind =	usbnet_cdc_unbind,
-	.status =	cdc_status,
-};
-
-/*-------------------------------------------------------------------------*/
-
-
-static const struct usb_device_id	products [] = {
-/*
- * BLACKLIST !!
- *
- * First blacklist any products that are egregiously nonconformant
- * with the CDC Ethernet specs.  Minor braindamage we cope with; when
- * they're not even trying, needing a separate driver is only the first
- * of the differences to show up.
- */
-
-#define	ZAURUS_MASTER_INTERFACE \
-	.bInterfaceClass	= USB_CLASS_COMM, \
-	.bInterfaceSubClass	= USB_CDC_SUBCLASS_ETHERNET, \
-	.bInterfaceProtocol	= USB_CDC_PROTO_NONE
-
-/* SA-1100 based Sharp Zaurus ("collie"), or compatible;
- * wire-incompatible with true CDC Ethernet implementations.
- * (And, it seems, needlessly so...)
- */
-{
-	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
-			  | USB_DEVICE_ID_MATCH_DEVICE,
-	.idVendor		= 0x04DD,
-	.idProduct		= 0x8004,
-	ZAURUS_MASTER_INTERFACE,
-	.driver_info		= 0,
-},
-
-/* PXA-25x based Sharp Zaurii.  Note that it seems some of these
- * (later models especially) may have shipped only with firmware
- * advertising false "CDC MDLM" compatibility ... but we're not
- * clear which models did that, so for now let's assume the worst.
- */
-{
-	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
-			  | USB_DEVICE_ID_MATCH_DEVICE,
-	.idVendor		= 0x04DD,
-	.idProduct		= 0x8005,	/* A-300 */
-	ZAURUS_MASTER_INTERFACE,
-	.driver_info		= 0,
-}, {
-	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
-			  | USB_DEVICE_ID_MATCH_DEVICE,
-	.idVendor		= 0x04DD,
-	.idProduct		= 0x8006,	/* B-500/SL-5600 */
-	ZAURUS_MASTER_INTERFACE,
-	.driver_info		= 0,
-}, {
-	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
-	          | USB_DEVICE_ID_MATCH_DEVICE,
-	.idVendor		= 0x04DD,
-	.idProduct		= 0x8007,	/* C-700 */
-	ZAURUS_MASTER_INTERFACE,
-	.driver_info		= 0,
-}, {
-	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
-		 | USB_DEVICE_ID_MATCH_DEVICE,
-	.idVendor               = 0x04DD,
-	.idProduct              = 0x9031,	/* C-750 C-760 */
-	ZAURUS_MASTER_INTERFACE,
-	.driver_info		= 0,
-}, {
-	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
-		 | USB_DEVICE_ID_MATCH_DEVICE,
-	.idVendor               = 0x04DD,
-	.idProduct              = 0x9032,	/* SL-6000 */
-	ZAURUS_MASTER_INTERFACE,
-	.driver_info		= 0,
-}, {
-	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
-		 | USB_DEVICE_ID_MATCH_DEVICE,
-	.idVendor               = 0x04DD,
-	/* reported with some C860 units */
-	.idProduct              = 0x9050,	/* C-860 */
-	ZAURUS_MASTER_INTERFACE,
-	.driver_info		= 0,
-},
-
-/* Olympus has some models with a Zaurus-compatible option.
- * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
- */
-{
-	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
-		 | USB_DEVICE_ID_MATCH_DEVICE,
-	.idVendor               = 0x07B4,
-	.idProduct              = 0x0F02,	/* R-1000 */
-	ZAURUS_MASTER_INTERFACE,
-	.driver_info		= 0,
-},
-
-/*
- * WHITELIST!!!
- *
- * CDC Ether uses two interfaces, not necessarily consecutive.
- * We match the main interface, ignoring the optional device
- * class so we could handle devices that aren't exclusively
- * CDC ether.
- *
- * NOTE:  this match must come AFTER entries blacklisting devices
- * because of bugs/quirks in a given product (like Zaurus, above).
- */
-{
-	USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
-			USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
-},
-	{ },		// END
-};
-MODULE_DEVICE_TABLE(usb, products);
-
-static struct usb_driver cdc_driver = {
-	.name =		"cdc_ether",
-	.id_table =	products,
-	.probe =	usbnet_probe,
-	.disconnect =	usbnet_disconnect,
-	.suspend =	usbnet_suspend,
-	.resume =	usbnet_resume,
-};
-
-
-static int __init cdc_init(void)
-{
-	BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
-			< sizeof(struct cdc_state)));
-
- 	return usb_register(&cdc_driver);
-}
-module_init(cdc_init);
-
-static void __exit cdc_exit(void)
-{
- 	usb_deregister(&cdc_driver);
-}
-module_exit(cdc_exit);
-
-MODULE_AUTHOR("David Brownell");
-MODULE_DESCRIPTION("USB CDC Ethernet devices");
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/net/cdc_subset.c b/drivers/usb/net/cdc_subset.c
deleted file mode 100644
index bc62b012602..00000000000
--- a/drivers/usb/net/cdc_subset.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- * Simple "CDC Subset" USB Networking Links
- * Copyright (C) 2000-2005 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/module.h>
-#include <linux/kmod.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/workqueue.h>
-#include <linux/mii.h>
-#include <linux/usb.h>
-
-#include "usbnet.h"
-
-
-/*
- * This supports simple USB network links that don't require any special
- * framing or hardware control operations.  The protocol used here is a
- * strict subset of CDC Ethernet, with three basic differences reflecting
- * the goal that almost any hardware should run it:
- *
- *  - Minimal runtime control:  one interface, no altsettings, and
- *    no vendor or class specific control requests.  If a device is
- *    configured, it is allowed to exchange packets with the host.
- *    Fancier models would mean not working on some hardware.
- *
- *  - Minimal manufacturing control:  no IEEE "Organizationally
- *    Unique ID" required, or an EEPROMs to store one.  Each host uses
- *    one random "locally assigned" Ethernet address instead, which can
- *    of course be overridden using standard tools like "ifconfig".
- *    (With 2^46 such addresses, same-net collisions are quite rare.)
- *
- *  - There is no additional framing data for USB.  Packets are written
- *    exactly as in CDC Ethernet, starting with an Ethernet header and
- *    terminated by a short packet.  However, the host will never send a
- *    zero length packet; some systems can't handle those robustly.
- *
- * Anything that can transmit and receive USB bulk packets can implement
- * this protocol.  That includes both smart peripherals and quite a lot
- * of "host-to-host" USB cables (which embed two devices back-to-back).
- *
- * Note that although Linux may use many of those host-to-host links
- * with this "cdc_subset" framing, that doesn't mean there may not be a
- * better approach.  Handling the "other end unplugs/replugs" scenario
- * well tends to require chip-specific vendor requests.  Also, Windows
- * peers at the other end of host-to-host cables may expect their own
- * framing to be used rather than this "cdc_subset" model.
- */
-
-#if defined(CONFIG_USB_EPSON2888) || defined(CONFIG_USB_ARMLINUX)
-/* PDA style devices are always connected if present */
-static int always_connected (struct usbnet *dev)
-{
-	return 0;
-}
-#endif
-
-#ifdef	CONFIG_USB_ALI_M5632
-#define	HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * ALi M5632 driver ... does high speed
- *
- * NOTE that the MS-Windows drivers for this chip use some funky and
- * (naturally) undocumented 7-byte prefix to each packet, so this is a
- * case where we don't currently interoperate.  Also, once you unplug
- * one end of the cable, you need to replug the other end too ... since
- * chip docs are unavailable, there's no way to reset the relevant state
- * short of a power cycle.
- *
- *-------------------------------------------------------------------------*/
-
-static const struct driver_info	ali_m5632_info = {
-	.description =	"ALi M5632",
-};
-
-#endif
-
-
-#ifdef	CONFIG_USB_AN2720
-#define	HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * AnchorChips 2720 driver ... http://www.cypress.com
- *
- * This doesn't seem to have a way to detect whether the peer is
- * connected, or need any reset handshaking.  It's got pretty big
- * internal buffers (handles most of a frame's worth of data).
- * Chip data sheets don't describe any vendor control messages.
- *
- *-------------------------------------------------------------------------*/
-
-static const struct driver_info	an2720_info = {
-	.description =	"AnchorChips/Cypress 2720",
-	// no reset available!
-	// no check_connect available!
-
-	.in = 2, .out = 2,		// direction distinguishes these
-};
-
-#endif	/* CONFIG_USB_AN2720 */
-
-
-#ifdef	CONFIG_USB_BELKIN
-#define	HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * Belkin F5U104 ... two NetChip 2280 devices + Atmel AVR microcontroller
- *
- * ... also two eTEK designs, including one sold as "Advance USBNET"
- *
- *-------------------------------------------------------------------------*/
-
-static const struct driver_info	belkin_info = {
-	.description =	"Belkin, eTEK, or compatible",
-};
-
-#endif	/* CONFIG_USB_BELKIN */
-
-
-
-#ifdef	CONFIG_USB_EPSON2888
-#define	HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * EPSON USB clients
- *
- * This is the same idea as Linux PDAs (below) except the firmware in the
- * device might not be Tux-powered.  Epson provides reference firmware that
- * implements this interface.  Product developers can reuse or modify that
- * code, such as by using their own product and vendor codes.
- *
- * Support was from Juro Bystricky <bystricky.juro@erd.epson.com>
- *
- *-------------------------------------------------------------------------*/
-
-static const struct driver_info	epson2888_info = {
-	.description =	"Epson USB Device",
-	.check_connect = always_connected,
-
-	.in = 4, .out = 3,
-};
-
-#endif	/* CONFIG_USB_EPSON2888 */
-
-
-/*-------------------------------------------------------------------------
- *
- * info from Jonathan McDowell <noodles@earth.li>
- *
- *-------------------------------------------------------------------------*/
-#ifdef CONFIG_USB_KC2190
-#define HAVE_HARDWARE
-static const struct driver_info kc2190_info = {
-	.description =  "KC Technology KC-190",
-};
-#endif /* CONFIG_USB_KC2190 */
-
-
-#ifdef	CONFIG_USB_ARMLINUX
-#define	HAVE_HARDWARE
-
-/*-------------------------------------------------------------------------
- *
- * Intel's SA-1100 chip integrates basic USB support, and is used
- * in PDAs like some iPaqs, the Yopy, some Zaurus models, and more.
- * When they run Linux, arch/arm/mach-sa1100/usb-eth.c may be used to
- * network using minimal USB framing data.
- *
- * This describes the driver currently in standard ARM Linux kernels.
- * The Zaurus uses a different driver (see later).
- *
- * PXA25x and PXA210 use XScale cores (ARM v5TE) with better USB support
- * and different USB endpoint numbering than the SA1100 devices.  The
- * mach-pxa/usb-eth.c driver re-uses the device ids from mach-sa1100
- * so we rely on the endpoint descriptors.
- *
- *-------------------------------------------------------------------------*/
-
-static const struct driver_info	linuxdev_info = {
-	.description =	"Linux Device",
-	.check_connect = always_connected,
-};
-
-static const struct driver_info	yopy_info = {
-	.description =	"Yopy",
-	.check_connect = always_connected,
-};
-
-static const struct driver_info	blob_info = {
-	.description =	"Boot Loader OBject",
-	.check_connect = always_connected,
-};
-
-#endif	/* CONFIG_USB_ARMLINUX */
-
-
-/*-------------------------------------------------------------------------*/
-
-#ifndef	HAVE_HARDWARE
-#error You need to configure some hardware for this driver
-#endif
-
-/*
- * chip vendor names won't normally be on the cables, and
- * may not be on the device.
- */
-
-static const struct usb_device_id	products [] = {
-
-#ifdef	CONFIG_USB_ALI_M5632
-{
-	USB_DEVICE (0x0402, 0x5632),	// ALi defaults
-	.driver_info =	(unsigned long) &ali_m5632_info,
-},
-{
-	USB_DEVICE (0x182d,0x207c),	// SiteCom CN-124
-	.driver_info =	(unsigned long) &ali_m5632_info,
-},
-#endif
-
-#ifdef	CONFIG_USB_AN2720
-{
-	USB_DEVICE (0x0547, 0x2720),	// AnchorChips defaults
-	.driver_info =	(unsigned long) &an2720_info,
-}, {
-	USB_DEVICE (0x0547, 0x2727),	// Xircom PGUNET
-	.driver_info =	(unsigned long) &an2720_info,
-},
-#endif
-
-#ifdef	CONFIG_USB_BELKIN
-{
-	USB_DEVICE (0x050d, 0x0004),	// Belkin
-	.driver_info =	(unsigned long) &belkin_info,
-}, {
-	USB_DEVICE (0x056c, 0x8100),	// eTEK
-	.driver_info =	(unsigned long) &belkin_info,
-}, {
-	USB_DEVICE (0x0525, 0x9901),	// Advance USBNET (eTEK)
-	.driver_info =	(unsigned long) &belkin_info,
-},
-#endif
-
-#ifdef	CONFIG_USB_EPSON2888
-{
-	USB_DEVICE (0x0525, 0x2888),	// EPSON USB client
-	.driver_info	= (unsigned long) &epson2888_info,
-},
-#endif
-
-#ifdef CONFIG_USB_KC2190
-{
-	USB_DEVICE (0x050f, 0x0190),	// KC-190
-	.driver_info =	(unsigned long) &kc2190_info,
-},
-#endif
-
-#ifdef	CONFIG_USB_ARMLINUX
-/*
- * SA-1100 using standard ARM Linux kernels, or compatible.
- * Often used when talking to Linux PDAs (iPaq, Yopy, etc).
- * The sa-1100 "usb-eth" driver handles the basic framing.
- *
- * PXA25x or PXA210 ...  these use a "usb-eth" driver much like
- * the sa1100 one, but hardware uses different endpoint numbers.
- *
- * Or the Linux "Ethernet" gadget on hardware that can't talk
- * CDC Ethernet (e.g., no altsettings), in either of two modes:
- *  - acting just like the old "usb-eth" firmware, though
- *    the implementation is different
- *  - supporting RNDIS as the first/default configuration for
- *    MS-Windows interop; Linux needs to use the other config
- */
-{
-	// 1183 = 0x049F, both used as hex values?
-	// Compaq "Itsy" vendor/product id
-	USB_DEVICE (0x049F, 0x505A),	// usb-eth, or compatible
-	.driver_info =	(unsigned long) &linuxdev_info,
-}, {
-	USB_DEVICE (0x0E7E, 0x1001),	// G.Mate "Yopy"
-	.driver_info =	(unsigned long) &yopy_info,
-}, {
-	USB_DEVICE (0x8086, 0x07d3),	// "blob" bootloader
-	.driver_info =	(unsigned long) &blob_info,
-}, {
-	// Linux Ethernet/RNDIS gadget on pxa210/25x/26x, second config
-	// e.g. Gumstix, current OpenZaurus, ...
-	USB_DEVICE_VER (0x0525, 0xa4a2, 0x0203, 0x0203),
-	.driver_info =	(unsigned long) &linuxdev_info,
-},
-#endif
-
-	{ },		// END
-};
-MODULE_DEVICE_TABLE(usb, products);
-
-/*-------------------------------------------------------------------------*/
-
-static struct usb_driver cdc_subset_driver = {
-	.name =		"cdc_subset",
-	.probe =	usbnet_probe,
-	.suspend =	usbnet_suspend,
-	.resume =	usbnet_resume,
-	.disconnect =	usbnet_disconnect,
-	.id_table =	products,
-};
-
-static int __init cdc_subset_init(void)
-{
-	return usb_register(&cdc_subset_driver);
-}
-module_init(cdc_subset_init);
-
-static void __exit cdc_subset_exit(void)
-{
-	usb_deregister(&cdc_subset_driver);
-}
-module_exit(cdc_subset_exit);
-
-MODULE_AUTHOR("David Brownell");
-MODULE_DESCRIPTION("Simple 'CDC Subset' USB networking links");
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/net/dm9601.c b/drivers/usb/net/dm9601.c
deleted file mode 100644
index a6763860147..00000000000
--- a/drivers/usb/net/dm9601.c
+++ /dev/null
@@ -1,619 +0,0 @@
-/*
- * Davicom DM9601 USB 1.1 10/100Mbps ethernet devices
- *
- * Peter Korsgaard <jacmet@sunsite.dk>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-//#define DEBUG
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/usb.h>
-#include <linux/crc32.h>
-
-#include "usbnet.h"
-
-/* datasheet:
- http://www.davicom.com.tw/big5/download/Data%20Sheet/DM9601-DS-P01-930914.pdf
-*/
-
-/* control requests */
-#define DM_READ_REGS	0x00
-#define DM_WRITE_REGS	0x01
-#define DM_READ_MEMS	0x02
-#define DM_WRITE_REG	0x03
-#define DM_WRITE_MEMS	0x05
-#define DM_WRITE_MEM	0x07
-
-/* registers */
-#define DM_NET_CTRL	0x00
-#define DM_RX_CTRL	0x05
-#define DM_SHARED_CTRL	0x0b
-#define DM_SHARED_ADDR	0x0c
-#define DM_SHARED_DATA	0x0d	/* low + high */
-#define DM_PHY_ADDR	0x10	/* 6 bytes */
-#define DM_MCAST_ADDR	0x16	/* 8 bytes */
-#define DM_GPR_CTRL	0x1e
-#define DM_GPR_DATA	0x1f
-
-#define DM_MAX_MCAST	64
-#define DM_MCAST_SIZE	8
-#define DM_EEPROM_LEN	256
-#define DM_TX_OVERHEAD	2	/* 2 byte header */
-#define DM_RX_OVERHEAD	7	/* 3 byte header + 4 byte crc tail */
-#define DM_TIMEOUT	1000
-
-
-static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data)
-{
-	devdbg(dev, "dm_read() reg=0x%02x length=%d", reg, length);
-	return usb_control_msg(dev->udev,
-			       usb_rcvctrlpipe(dev->udev, 0),
-			       DM_READ_REGS,
-			       USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			       0, reg, data, length, USB_CTRL_SET_TIMEOUT);
-}
-
-static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value)
-{
-	return dm_read(dev, reg, 1, value);
-}
-
-static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data)
-{
-	devdbg(dev, "dm_write() reg=0x%02x, length=%d", reg, length);
-	return usb_control_msg(dev->udev,
-			       usb_sndctrlpipe(dev->udev, 0),
-			       DM_WRITE_REGS,
-			       USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE,
-			       0, reg, data, length, USB_CTRL_SET_TIMEOUT);
-}
-
-static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value)
-{
-	devdbg(dev, "dm_write_reg() reg=0x%02x, value=0x%02x", reg, value);
-	return usb_control_msg(dev->udev,
-			       usb_sndctrlpipe(dev->udev, 0),
-			       DM_WRITE_REG,
-			       USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE,
-			       value, reg, NULL, 0, USB_CTRL_SET_TIMEOUT);
-}
-
-static void dm_write_async_callback(struct urb *urb)
-{
-	struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
-
-	if (urb->status < 0)
-		printk(KERN_DEBUG "dm_write_async_callback() failed with %d",
-		       urb->status);
-
-	kfree(req);
-	usb_free_urb(urb);
-}
-
-static void dm_write_async(struct usbnet *dev, u8 reg, u16 length, void *data)
-{
-	struct usb_ctrlrequest *req;
-	struct urb *urb;
-	int status;
-
-	devdbg(dev, "dm_write_async() reg=0x%02x length=%d", reg, length);
-
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!urb) {
-		deverr(dev, "Error allocating URB in dm_write_async!");
-		return;
-	}
-
-	req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
-	if (!req) {
-		deverr(dev, "Failed to allocate memory for control request");
-		usb_free_urb(urb);
-		return;
-	}
-
-	req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
-	req->bRequest = DM_WRITE_REGS;
-	req->wValue = 0;
-	req->wIndex = cpu_to_le16(reg);
-	req->wLength = cpu_to_le16(length);
-
-	usb_fill_control_urb(urb, dev->udev,
-			     usb_sndctrlpipe(dev->udev, 0),
-			     (void *)req, data, length,
-			     dm_write_async_callback, req);
-
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status < 0) {
-		deverr(dev, "Error submitting the control message: status=%d",
-		       status);
-		kfree(req);
-		usb_free_urb(urb);
-	}
-}
-
-static void dm_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
-{
-	struct usb_ctrlrequest *req;
-	struct urb *urb;
-	int status;
-
-	devdbg(dev, "dm_write_reg_async() reg=0x%02x value=0x%02x",
-	       reg, value);
-
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!urb) {
-		deverr(dev, "Error allocating URB in dm_write_async!");
-		return;
-	}
-
-	req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
-	if (!req) {
-		deverr(dev, "Failed to allocate memory for control request");
-		usb_free_urb(urb);
-		return;
-	}
-
-	req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
-	req->bRequest = DM_WRITE_REG;
-	req->wValue = cpu_to_le16(value);
-	req->wIndex = cpu_to_le16(reg);
-	req->wLength = 0;
-
-	usb_fill_control_urb(urb, dev->udev,
-			     usb_sndctrlpipe(dev->udev, 0),
-			     (void *)req, NULL, 0, dm_write_async_callback, req);
-
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status < 0) {
-		deverr(dev, "Error submitting the control message: status=%d",
-		       status);
-		kfree(req);
-		usb_free_urb(urb);
-	}
-}
-
-static int dm_read_shared_word(struct usbnet *dev, int phy, u8 reg, u16 *value)
-{
-	int ret, i;
-
-	mutex_lock(&dev->phy_mutex);
-
-	dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
-	dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0xc : 0x4);
-
-	for (i = 0; i < DM_TIMEOUT; i++) {
-		u8 tmp;
-
-		udelay(1);
-		ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp);
-		if (ret < 0)
-			goto out;
-
-		/* ready */
-		if ((tmp & 1) == 0)
-			break;
-	}
-
-	if (i == DM_TIMEOUT) {
-		deverr(dev, "%s read timed out!", phy ? "phy" : "eeprom");
-		ret = -EIO;
-		goto out;
-	}
-
-	dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
-	ret = dm_read(dev, DM_SHARED_DATA, 2, value);
-
-	devdbg(dev, "read shared %d 0x%02x returned 0x%04x, %d",
-	       phy, reg, *value, ret);
-
- out:
-	mutex_unlock(&dev->phy_mutex);
-	return ret;
-}
-
-static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, u16 value)
-{
-	int ret, i;
-
-	mutex_lock(&dev->phy_mutex);
-
-	ret = dm_write(dev, DM_SHARED_DATA, 2, &value);
-	if (ret < 0)
-		goto out;
-
-	dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
-	dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1c : 0x14);
-
-	for (i = 0; i < DM_TIMEOUT; i++) {
-		u8 tmp;
-
-		udelay(1);
-		ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp);
-		if (ret < 0)
-			goto out;
-
-		/* ready */
-		if ((tmp & 1) == 0)
-			break;
-	}
-
-	if (i == DM_TIMEOUT) {
-		deverr(dev, "%s write timed out!", phy ? "phy" : "eeprom");
-		ret = -EIO;
-		goto out;
-	}
-
-	dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
-
-out:
-	mutex_unlock(&dev->phy_mutex);
-	return ret;
-}
-
-static int dm_read_eeprom_word(struct usbnet *dev, u8 offset, void *value)
-{
-	return dm_read_shared_word(dev, 0, offset, value);
-}
-
-
-
-static int dm9601_get_eeprom_len(struct net_device *dev)
-{
-	return DM_EEPROM_LEN;
-}
-
-static int dm9601_get_eeprom(struct net_device *net,
-			     struct ethtool_eeprom *eeprom, u8 * data)
-{
-	struct usbnet *dev = netdev_priv(net);
-	u16 *ebuf = (u16 *) data;
-	int i;
-
-	/* access is 16bit */
-	if ((eeprom->offset % 2) || (eeprom->len % 2))
-		return -EINVAL;
-
-	for (i = 0; i < eeprom->len / 2; i++) {
-		if (dm_read_eeprom_word(dev, eeprom->offset / 2 + i,
-					&ebuf[i]) < 0)
-			return -EINVAL;
-	}
-	return 0;
-}
-
-static int dm9601_mdio_read(struct net_device *netdev, int phy_id, int loc)
-{
-	struct usbnet *dev = netdev_priv(netdev);
-
-	u16 res;
-
-	if (phy_id) {
-		devdbg(dev, "Only internal phy supported");
-		return 0;
-	}
-
-	dm_read_shared_word(dev, 1, loc, &res);
-
-	devdbg(dev,
-	       "dm9601_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x",
-	       phy_id, loc, le16_to_cpu(res));
-
-	return le16_to_cpu(res);
-}
-
-static void dm9601_mdio_write(struct net_device *netdev, int phy_id, int loc,
-			      int val)
-{
-	struct usbnet *dev = netdev_priv(netdev);
-	u16 res = cpu_to_le16(val);
-
-	if (phy_id) {
-		devdbg(dev, "Only internal phy supported");
-		return;
-	}
-
-	devdbg(dev,"dm9601_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x",
-	       phy_id, loc, val);
-
-	dm_write_shared_word(dev, 1, loc, res);
-}
-
-static void dm9601_get_drvinfo(struct net_device *net,
-			       struct ethtool_drvinfo *info)
-{
-	/* Inherit standard device info */
-	usbnet_get_drvinfo(net, info);
-	info->eedump_len = DM_EEPROM_LEN;
-}
-
-static u32 dm9601_get_link(struct net_device *net)
-{
-	struct usbnet *dev = netdev_priv(net);
-
-	return mii_link_ok(&dev->mii);
-}
-
-static int dm9601_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
-{
-	struct usbnet *dev = netdev_priv(net);
-
-	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
-}
-
-static struct ethtool_ops dm9601_ethtool_ops = {
-	.get_drvinfo	= dm9601_get_drvinfo,
-	.get_link	= dm9601_get_link,
-	.get_msglevel	= usbnet_get_msglevel,
-	.set_msglevel	= usbnet_set_msglevel,
-	.get_eeprom_len	= dm9601_get_eeprom_len,
-	.get_eeprom	= dm9601_get_eeprom,
-	.get_settings	= usbnet_get_settings,
-	.set_settings	= usbnet_set_settings,
-	.nway_reset	= usbnet_nway_reset,
-};
-
-static void dm9601_set_multicast(struct net_device *net)
-{
-	struct usbnet *dev = netdev_priv(net);
-	/* We use the 20 byte dev->data for our 8 byte filter buffer
-	 * to avoid allocating memory that is tricky to free later */
-	u8 *hashes = (u8 *) & dev->data;
-	u8 rx_ctl = 0x01;
-
-	memset(hashes, 0x00, DM_MCAST_SIZE);
-	hashes[DM_MCAST_SIZE - 1] |= 0x80;	/* broadcast address */
-
-	if (net->flags & IFF_PROMISC) {
-		rx_ctl |= 0x02;
-	} else if (net->flags & IFF_ALLMULTI || net->mc_count > DM_MAX_MCAST) {
-		rx_ctl |= 0x04;
-	} else if (net->mc_count) {
-		struct dev_mc_list *mc_list = net->mc_list;
-		int i;
-
-		for (i = 0; i < net->mc_count; i++) {
-			u32 crc = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26;
-			hashes[crc >> 3] |= 1 << (crc & 0x7);
-		}
-	}
-
-	dm_write_async(dev, DM_MCAST_ADDR, DM_MCAST_SIZE, hashes);
-	dm_write_reg_async(dev, DM_RX_CTRL, rx_ctl);
-}
-
-static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf)
-{
-	int ret;
-
-	ret = usbnet_get_endpoints(dev, intf);
-	if (ret)
-		goto out;
-
-	dev->net->do_ioctl = dm9601_ioctl;
-	dev->net->set_multicast_list = dm9601_set_multicast;
-	dev->net->ethtool_ops = &dm9601_ethtool_ops;
-	dev->net->hard_header_len += DM_TX_OVERHEAD;
-	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
-	dev->rx_urb_size = dev->net->mtu + DM_RX_OVERHEAD;
-
-	dev->mii.dev = dev->net;
-	dev->mii.mdio_read = dm9601_mdio_read;
-	dev->mii.mdio_write = dm9601_mdio_write;
-	dev->mii.phy_id_mask = 0x1f;
-	dev->mii.reg_num_mask = 0x1f;
-
-	/* reset */
-	ret = dm_write_reg(dev, DM_NET_CTRL, 1);
-	udelay(20);
-
-	/* read MAC */
-	ret = dm_read(dev, DM_PHY_ADDR, ETH_ALEN, dev->net->dev_addr);
-	if (ret < 0) {
-		printk(KERN_ERR "Error reading MAC address\n");
-		ret = -ENODEV;
-		goto out;
-	}
-
-
-	/* power up phy */
-	dm_write_reg(dev, DM_GPR_CTRL, 1);
-	dm_write_reg(dev, DM_GPR_DATA, 0);
-
-	/* receive broadcast packets */
-	dm9601_set_multicast(dev->net);
-
-	dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
-	dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
-			  ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
-	mii_nway_restart(&dev->mii);
-
-out:
-	return ret;
-}
-
-static int dm9601_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
-{
-	u8 status;
-	int len;
-
-	/* format:
-	   b0: rx status
-	   b1: packet length (incl crc) low
-	   b2: packet length (incl crc) high
-	   b3..n-4: packet data
-	   bn-3..bn: ethernet crc
-	 */
-
-	if (unlikely(skb->len < DM_RX_OVERHEAD)) {
-		dev_err(&dev->udev->dev, "unexpected tiny rx frame\n");
-		return 0;
-	}
-
-	status = skb->data[0];
-	len = (skb->data[1] | (skb->data[2] << 8)) - 4;
-
-	if (unlikely(status & 0xbf)) {
-		if (status & 0x01) dev->stats.rx_fifo_errors++;
-		if (status & 0x02) dev->stats.rx_crc_errors++;
-		if (status & 0x04) dev->stats.rx_frame_errors++;
-		if (status & 0x20) dev->stats.rx_missed_errors++;
-		if (status & 0x90) dev->stats.rx_length_errors++;
-		return 0;
-	}
-
-	skb_pull(skb, 3);
-	skb_trim(skb, len);
-
-	return 1;
-}
-
-static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
-				       gfp_t flags)
-{
-	int len;
-
-	/* format:
-	   b0: packet length low
-	   b1: packet length high
-	   b3..n: packet data
-	*/
-
-	if (skb_headroom(skb) < DM_TX_OVERHEAD) {
-		struct sk_buff *skb2;
-
-		skb2 = skb_copy_expand(skb, DM_TX_OVERHEAD, 0, flags);
-		dev_kfree_skb_any(skb);
-		skb = skb2;
-		if (!skb)
-			return NULL;
-	}
-
-	__skb_push(skb, DM_TX_OVERHEAD);
-
-	len = skb->len;
-	/* usbnet adds padding if length is a multiple of packet size
-	   if so, adjust length value in header */
-	if ((len % dev->maxpacket) == 0)
-		len++;
-
-	skb->data[0] = len;
-	skb->data[1] = len >> 8;
-
-	return skb;
-}
-
-static void dm9601_status(struct usbnet *dev, struct urb *urb)
-{
-	int link;
-	u8 *buf;
-
-	/* format:
-	   b0: net status
-	   b1: tx status 1
-	   b2: tx status 2
-	   b3: rx status
-	   b4: rx overflow
-	   b5: rx count
-	   b6: tx count
-	   b7: gpr
-	*/
-
-	if (urb->actual_length < 8)
-		return;
-
-	buf = urb->transfer_buffer;
-
-	link = !!(buf[0] & 0x40);
-	if (netif_carrier_ok(dev->net) != link) {
-		if (link) {
-			netif_carrier_on(dev->net);
-			usbnet_defer_kevent (dev, EVENT_LINK_RESET);
-		}
-		else
-			netif_carrier_off(dev->net);
-		devdbg(dev, "Link Status is: %d", link);
-	}
-}
-
-static int dm9601_link_reset(struct usbnet *dev)
-{
-	struct ethtool_cmd ecmd;
-
-	mii_check_media(&dev->mii, 1, 1);
-	mii_ethtool_gset(&dev->mii, &ecmd);
-
-	devdbg(dev, "link_reset() speed: %d duplex: %d",
-	       ecmd.speed, ecmd.duplex);
-
-	return 0;
-}
-
-static const struct driver_info dm9601_info = {
-	.description	= "Davicom DM9601 USB Ethernet",
-	.flags		= FLAG_ETHER,
-	.bind		= dm9601_bind,
-	.rx_fixup	= dm9601_rx_fixup,
-	.tx_fixup	= dm9601_tx_fixup,
-	.status		= dm9601_status,
-	.link_reset	= dm9601_link_reset,
-	.reset		= dm9601_link_reset,
-};
-
-static const struct usb_device_id products[] = {
-	{
-	 USB_DEVICE(0x07aa, 0x9601),	/* Corega FEther USB-TXC */
-	 .driver_info = (unsigned long)&dm9601_info,
-	 },
-	{
-	 USB_DEVICE(0x0a46, 0x9601),	/* Davicom USB-100 */
-	 .driver_info = (unsigned long)&dm9601_info,
-	 },
-	{
-	 USB_DEVICE(0x0a46, 0x6688),	/* ZT6688 USB NIC */
-	 .driver_info = (unsigned long)&dm9601_info,
-	 },
-	{
-	 USB_DEVICE(0x0a46, 0x0268),	/* ShanTou ST268 USB NIC */
-	 .driver_info = (unsigned long)&dm9601_info,
-	 },
-	{},			// END
-};
-
-MODULE_DEVICE_TABLE(usb, products);
-
-static struct usb_driver dm9601_driver = {
-	.name = "dm9601",
-	.id_table = products,
-	.probe = usbnet_probe,
-	.disconnect = usbnet_disconnect,
-	.suspend = usbnet_suspend,
-	.resume = usbnet_resume,
-};
-
-static int __init dm9601_init(void)
-{
-	return usb_register(&dm9601_driver);
-}
-
-static void __exit dm9601_exit(void)
-{
-	usb_deregister(&dm9601_driver);
-}
-
-module_init(dm9601_init);
-module_exit(dm9601_exit);
-
-MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
-MODULE_DESCRIPTION("Davicom DM9601 USB 1.1 ethernet devices");
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/net/gl620a.c b/drivers/usb/net/gl620a.c
deleted file mode 100644
index 031cf5ca4db..00000000000
--- a/drivers/usb/net/gl620a.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * GeneSys GL620USB-A based links
- * Copyright (C) 2001 by Jiun-Jie Huang <huangjj@genesyslogic.com.tw>
- * Copyright (C) 2001 by Stanislav Brabec <utx@penguin.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-// #define	DEBUG			// error path messages, extra info
-// #define	VERBOSE			// more; success messages
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/workqueue.h>
-#include <linux/mii.h>
-#include <linux/usb.h>
-
-#include "usbnet.h"
-
-
-/*
- * GeneSys GL620USB-A (www.genesyslogic.com.tw)
- *
- * ... should partially interop with the Win32 driver for this hardware.
- * The GeneSys docs imply there's some NDIS issue motivating this framing.
- *
- * Some info from GeneSys:
- *  - GL620USB-A is full duplex; GL620USB is only half duplex for bulk.
- *    (Some cables, like the BAFO-100c, use the half duplex version.)
- *  - For the full duplex model, the low bit of the version code says
- *    which side is which ("left/right").
- *  - For the half duplex type, a control/interrupt handshake settles
- *    the transfer direction.  (That's disabled here, partially coded.)
- *    A control URB would block until other side writes an interrupt.
- *
- * Original code from Jiun-Jie Huang <huangjj@genesyslogic.com.tw>
- * and merged into "usbnet" by Stanislav Brabec <utx@penguin.cz>.
- */
-
-// control msg write command
-#define GENELINK_CONNECT_WRITE			0xF0
-// interrupt pipe index
-#define GENELINK_INTERRUPT_PIPE			0x03
-// interrupt read buffer size
-#define INTERRUPT_BUFSIZE			0x08
-// interrupt pipe interval value
-#define GENELINK_INTERRUPT_INTERVAL		0x10
-// max transmit packet number per transmit
-#define GL_MAX_TRANSMIT_PACKETS			32
-// max packet length
-#define GL_MAX_PACKET_LEN			1514
-// max receive buffer size
-#define GL_RCV_BUF_SIZE		\
-	(((GL_MAX_PACKET_LEN + 4) * GL_MAX_TRANSMIT_PACKETS) + 4)
-
-struct gl_packet {
-	__le32		packet_length;
-	char		packet_data [1];
-};
-
-struct gl_header {
-	__le32			packet_count;
-	struct gl_packet	packets;
-};
-
-static int genelink_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
-{
-	struct gl_header	*header;
-	struct gl_packet	*packet;
-	struct sk_buff		*gl_skb;
-	u32			size;
-	u32			count;
-
-	header = (struct gl_header *) skb->data;
-
-	// get the packet count of the received skb
-	count = le32_to_cpu(header->packet_count);
-	if (count > GL_MAX_TRANSMIT_PACKETS) {
-		dbg("genelink: invalid received packet count %u", count);
-		return 0;
-	}
-
-	// set the current packet pointer to the first packet
-	packet = &header->packets;
-
-	// decrement the length for the packet count size 4 bytes
-	skb_pull(skb, 4);
-
-	while (count > 1) {
-		// get the packet length
-		size = le32_to_cpu(packet->packet_length);
-
-		// this may be a broken packet
-		if (size > GL_MAX_PACKET_LEN) {
-			dbg("genelink: invalid rx length %d", size);
-			return 0;
-		}
-
-		// allocate the skb for the individual packet
-		gl_skb = alloc_skb(size, GFP_ATOMIC);
-		if (gl_skb) {
-
-			// copy the packet data to the new skb
-			memcpy(skb_put(gl_skb, size),
-					packet->packet_data, size);
-			usbnet_skb_return(dev, gl_skb);
-		}
-
-		// advance to the next packet
-		packet = (struct gl_packet *)&packet->packet_data[size];
-		count--;
-
-		// shift the data pointer to the next gl_packet
-		skb_pull(skb, size + 4);
-	}
-
-	// skip the packet length field 4 bytes
-	skb_pull(skb, 4);
-
-	if (skb->len > GL_MAX_PACKET_LEN) {
-		dbg("genelink: invalid rx length %d", skb->len);
-		return 0;
-	}
-	return 1;
-}
-
-static struct sk_buff *
-genelink_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
-{
-	int 	padlen;
-	int	length = skb->len;
-	int	headroom = skb_headroom(skb);
-	int	tailroom = skb_tailroom(skb);
-	__le32	*packet_count;
-	__le32	*packet_len;
-
-	// FIXME:  magic numbers, bleech
-	padlen = ((skb->len + (4 + 4*1)) % 64) ? 0 : 1;
-
-	if ((!skb_cloned(skb))
-			&& ((headroom + tailroom) >= (padlen + (4 + 4*1)))) {
-		if ((headroom < (4 + 4*1)) || (tailroom < padlen)) {
-			skb->data = memmove(skb->head + (4 + 4*1),
-					     skb->data, skb->len);
-			skb_set_tail_pointer(skb, skb->len);
-		}
-	} else {
-		struct sk_buff	*skb2;
-		skb2 = skb_copy_expand(skb, (4 + 4*1) , padlen, flags);
-		dev_kfree_skb_any(skb);
-		skb = skb2;
-		if (!skb)
-			return NULL;
-	}
-
-	// attach the packet count to the header
-	packet_count = (__le32 *) skb_push(skb, (4 + 4*1));
-	packet_len = packet_count + 1;
-
-	*packet_count = cpu_to_le32(1);
-	*packet_len = cpu_to_le32(length);
-
-	// add padding byte
-	if ((skb->len % dev->maxpacket) == 0)
-		skb_put(skb, 1);
-
-	return skb;
-}
-
-static int genelink_bind(struct usbnet *dev, struct usb_interface *intf)
-{
-	dev->hard_mtu = GL_RCV_BUF_SIZE;
-	dev->net->hard_header_len += 4;
-	dev->in = usb_rcvbulkpipe(dev->udev, dev->driver_info->in);
-	dev->out = usb_sndbulkpipe(dev->udev, dev->driver_info->out);
-	return 0;
-}
-
-static const struct driver_info	genelink_info = {
-	.description =	"Genesys GeneLink",
-	.flags =	FLAG_FRAMING_GL | FLAG_NO_SETINT,
-	.bind =		genelink_bind,
-	.rx_fixup =	genelink_rx_fixup,
-	.tx_fixup =	genelink_tx_fixup,
-
-	.in = 1, .out = 2,
-
-#ifdef	GENELINK_ACK
-	.check_connect =genelink_check_connect,
-#endif
-};
-
-static const struct usb_device_id	products [] = {
-
-{
-	USB_DEVICE(0x05e3, 0x0502),	// GL620USB-A
-	.driver_info =	(unsigned long) &genelink_info,
-},
-	/* NOT: USB_DEVICE(0x05e3, 0x0501),	// GL620USB
-	 * that's half duplex, not currently supported
-	 */
-	{ },		// END
-};
-MODULE_DEVICE_TABLE(usb, products);
-
-static struct usb_driver gl620a_driver = {
-	.name =		"gl620a",
-	.id_table =	products,
-	.probe =	usbnet_probe,
-	.disconnect =	usbnet_disconnect,
-	.suspend =	usbnet_suspend,
-	.resume =	usbnet_resume,
-};
-
-static int __init usbnet_init(void)
-{
- 	return usb_register(&gl620a_driver);
-}
-module_init(usbnet_init);
-
-static void __exit usbnet_exit(void)
-{
- 	usb_deregister(&gl620a_driver);
-}
-module_exit(usbnet_exit);
-
-MODULE_AUTHOR("Jiun-Jie Huang");
-MODULE_DESCRIPTION("GL620-USB-A Host-to-Host Link cables");
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c
deleted file mode 100644
index 60d29440f31..00000000000
--- a/drivers/usb/net/kaweth.c
+++ /dev/null
@@ -1,1337 +0,0 @@
-/****************************************************************
- *
- *     kaweth.c - driver for KL5KUSB101 based USB->Ethernet
- *
- *     (c) 2000 Interlan Communications
- *     (c) 2000 Stephane Alnet
- *     (C) 2001 Brad Hards
- *     (C) 2002 Oliver Neukum
- *
- *     Original author: The Zapman <zapman@interlan.net>
- *     Inspired by, and much credit goes to Michael Rothwell
- *     <rothwell@interlan.net> for the test equipment, help, and patience
- *     Based off of (and with thanks to) Petko Manolov's pegaus.c driver.
- *     Also many thanks to Joel Silverman and Ed Surprenant at Kawasaki
- *     for providing the firmware and driver resources.
- *
- *     This program is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2, or
- *     (at your option) any later version.
- *
- *     This program is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public License
- *     along with this program; if not, write to the Free Software Foundation,
- *     Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- ****************************************************************/
-
-/* TODO:
- * Fix in_interrupt() problem
- * Develop test procedures for USB net interfaces
- * Run test procedures
- * Fix bugs from previous two steps
- * Snoop other OSs for any tricks we're not doing
- * SMP locking
- * Reduce arbitrary timeouts
- * Smart multicast support
- * Temporary MAC change support
- * Tunable SOFs parameter - ioctl()?
- * Ethernet stats collection
- * Code formatting improvements
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/usb.h>
-#include <linux/types.h>
-#include <linux/ethtool.h>
-#include <linux/dma-mapping.h>
-#include <linux/wait.h>
-#include <asm/uaccess.h>
-#include <asm/semaphore.h>
-#include <asm/byteorder.h>
-
-#undef DEBUG
-
-#include "kawethfw.h"
-
-#define KAWETH_MTU			1514
-#define KAWETH_BUF_SIZE			1664
-#define KAWETH_TX_TIMEOUT		(5 * HZ)
-#define KAWETH_SCRATCH_SIZE		32
-#define KAWETH_FIRMWARE_BUF_SIZE	4096
-#define KAWETH_CONTROL_TIMEOUT		(30 * HZ)
-
-#define KAWETH_STATUS_BROKEN		0x0000001
-#define KAWETH_STATUS_CLOSING		0x0000002
-#define KAWETH_STATUS_SUSPENDING	0x0000004
-
-#define KAWETH_STATUS_BLOCKED (KAWETH_STATUS_CLOSING | KAWETH_STATUS_SUSPENDING)
-
-#define KAWETH_PACKET_FILTER_PROMISCUOUS	0x01
-#define KAWETH_PACKET_FILTER_ALL_MULTICAST	0x02
-#define KAWETH_PACKET_FILTER_DIRECTED		0x04
-#define KAWETH_PACKET_FILTER_BROADCAST		0x08
-#define KAWETH_PACKET_FILTER_MULTICAST		0x10
-
-/* Table 7 */
-#define KAWETH_COMMAND_GET_ETHERNET_DESC	0x00
-#define KAWETH_COMMAND_MULTICAST_FILTERS        0x01
-#define KAWETH_COMMAND_SET_PACKET_FILTER	0x02
-#define KAWETH_COMMAND_STATISTICS               0x03
-#define KAWETH_COMMAND_SET_TEMP_MAC     	0x06
-#define KAWETH_COMMAND_GET_TEMP_MAC             0x07
-#define KAWETH_COMMAND_SET_URB_SIZE		0x08
-#define KAWETH_COMMAND_SET_SOFS_WAIT		0x09
-#define KAWETH_COMMAND_SCAN			0xFF
-
-#define KAWETH_SOFS_TO_WAIT			0x05
-
-#define INTBUFFERSIZE				4
-
-#define STATE_OFFSET				0
-#define STATE_MASK				0x40
-#define	STATE_SHIFT				5
-
-#define IS_BLOCKED(s) (s & KAWETH_STATUS_BLOCKED)
-
-
-MODULE_AUTHOR("Michael Zappe <zapman@interlan.net>, Stephane Alnet <stephane@u-picardie.fr>, Brad Hards <bhards@bigpond.net.au> and Oliver Neukum <oliver@neukum.org>");
-MODULE_DESCRIPTION("KL5USB101 USB Ethernet driver");
-MODULE_LICENSE("GPL");
-
-static const char driver_name[] = "kaweth";
-
-static int kaweth_probe(
-		struct usb_interface *intf,
-		const struct usb_device_id *id	/* from id_table */
-	);
-static void kaweth_disconnect(struct usb_interface *intf);
-static int kaweth_internal_control_msg(struct usb_device *usb_dev,
-				       unsigned int pipe,
-				       struct usb_ctrlrequest *cmd, void *data,
-				       int len, int timeout);
-static int kaweth_suspend(struct usb_interface *intf, pm_message_t message);
-static int kaweth_resume(struct usb_interface *intf);
-
-/****************************************************************
- *     usb_device_id
- ****************************************************************/
-static struct usb_device_id usb_klsi_table[] = {
-	{ USB_DEVICE(0x03e8, 0x0008) }, /* AOX Endpoints USB Ethernet */
-	{ USB_DEVICE(0x04bb, 0x0901) }, /* I-O DATA USB-ET/T */
-	{ USB_DEVICE(0x0506, 0x03e8) }, /* 3Com 3C19250 */
-	{ USB_DEVICE(0x0506, 0x11f8) }, /* 3Com 3C460 */
-	{ USB_DEVICE(0x0557, 0x2002) }, /* ATEN USB Ethernet */
-	{ USB_DEVICE(0x0557, 0x4000) }, /* D-Link DSB-650C */
-	{ USB_DEVICE(0x0565, 0x0002) }, /* Peracom Enet */
-	{ USB_DEVICE(0x0565, 0x0003) }, /* Optus@Home UEP1045A */
-	{ USB_DEVICE(0x0565, 0x0005) }, /* Peracom Enet2 */
-	{ USB_DEVICE(0x05e9, 0x0008) }, /* KLSI KL5KUSB101B */
-	{ USB_DEVICE(0x05e9, 0x0009) }, /* KLSI KL5KUSB101B (Board change) */
-	{ USB_DEVICE(0x066b, 0x2202) }, /* Linksys USB10T */
-	{ USB_DEVICE(0x06e1, 0x0008) }, /* ADS USB-10BT */
-	{ USB_DEVICE(0x06e1, 0x0009) }, /* ADS USB-10BT */
-	{ USB_DEVICE(0x0707, 0x0100) }, /* SMC 2202USB */
-	{ USB_DEVICE(0x07aa, 0x0001) }, /* Correga K.K. */
-	{ USB_DEVICE(0x07b8, 0x4000) }, /* D-Link DU-E10 */
-	{ USB_DEVICE(0x0846, 0x1001) }, /* NetGear EA-101 */
-	{ USB_DEVICE(0x0846, 0x1002) }, /* NetGear EA-101 */
-	{ USB_DEVICE(0x085a, 0x0008) }, /* PortGear Ethernet Adapter */
-	{ USB_DEVICE(0x085a, 0x0009) }, /* PortGear Ethernet Adapter */
-	{ USB_DEVICE(0x087d, 0x5704) }, /* Jaton USB Ethernet Device Adapter */
-	{ USB_DEVICE(0x0951, 0x0008) }, /* Kingston Technology USB Ethernet Adapter */
-	{ USB_DEVICE(0x095a, 0x3003) }, /* Portsmith Express Ethernet Adapter */
-	{ USB_DEVICE(0x10bd, 0x1427) }, /* ASANTE USB To Ethernet Adapter */
-	{ USB_DEVICE(0x1342, 0x0204) }, /* Mobility USB-Ethernet Adapter */
-	{ USB_DEVICE(0x13d2, 0x0400) }, /* Shark Pocket Adapter */
-	{ USB_DEVICE(0x1485, 0x0001) },	/* Silicom U2E */
-	{ USB_DEVICE(0x1485, 0x0002) }, /* Psion Dacom Gold Port Ethernet */
-	{ USB_DEVICE(0x1645, 0x0005) }, /* Entrega E45 */
-	{ USB_DEVICE(0x1645, 0x0008) }, /* Entrega USB Ethernet Adapter */
-	{ USB_DEVICE(0x1645, 0x8005) }, /* PortGear Ethernet Adapter */
-	{ USB_DEVICE(0x1668, 0x0323) }, /* Actiontec USB Ethernet */
-	{ USB_DEVICE(0x2001, 0x4000) }, /* D-link DSB-650C */
-	{} /* Null terminator */
-};
-
-MODULE_DEVICE_TABLE (usb, usb_klsi_table);
-
-/****************************************************************
- *     kaweth_driver
- ****************************************************************/
-static struct usb_driver kaweth_driver = {
-	.name =		driver_name,
-	.probe =	kaweth_probe,
-	.disconnect =	kaweth_disconnect,
-	.suspend =	kaweth_suspend,
-	.resume =	kaweth_resume,
-	.id_table =     usb_klsi_table,
-	.supports_autosuspend =	1,
-};
-
-typedef __u8 eth_addr_t[6];
-
-/****************************************************************
- *     usb_eth_dev
- ****************************************************************/
-struct usb_eth_dev {
-	char *name;
-	__u16 vendor;
-	__u16 device;
-	void *pdata;
-};
-
-/****************************************************************
- *     kaweth_ethernet_configuration
- *     Refer Table 8
- ****************************************************************/
-struct kaweth_ethernet_configuration
-{
-	__u8 size;
-	__u8 reserved1;
-	__u8 reserved2;
-	eth_addr_t hw_addr;
-	__u32 statistics_mask;
-	__le16 segment_size;
-	__u16 max_multicast_filters;
-	__u8 reserved3;
-} __attribute__ ((packed));
-
-/****************************************************************
- *     kaweth_device
- ****************************************************************/
-struct kaweth_device
-{
-	spinlock_t device_lock;
-
-	__u32 status;
-	int end;
-	int suspend_lowmem_rx;
-	int suspend_lowmem_ctrl;
-	int linkstate;
-	int opened;
-	struct delayed_work lowmem_work;
-
-	struct usb_device *dev;
-	struct usb_interface *intf;
-	struct net_device *net;
-	wait_queue_head_t term_wait;
-
-	struct urb *rx_urb;
-	struct urb *tx_urb;
-	struct urb *irq_urb;
-
-	dma_addr_t intbufferhandle;
-	__u8 *intbuffer;
-	dma_addr_t rxbufferhandle;
-	__u8 *rx_buf;
-
-	
-	struct sk_buff *tx_skb;
-
-	__u8 *firmware_buf;
-	__u8 scratch[KAWETH_SCRATCH_SIZE];
-	__u16 packet_filter_bitmap;
-
-	struct kaweth_ethernet_configuration configuration;
-
-	struct net_device_stats stats;
-};
-
-
-/****************************************************************
- *     kaweth_control
- ****************************************************************/
-static int kaweth_control(struct kaweth_device *kaweth,
-			  unsigned int pipe,
-			  __u8 request,
-			  __u8 requesttype,
-			  __u16 value,
-			  __u16 index,
-			  void *data,
-			  __u16 size,
-			  int timeout)
-{
-	struct usb_ctrlrequest *dr;
-
-	dbg("kaweth_control()");
-
-	if(in_interrupt()) {
-		dbg("in_interrupt()");
-		return -EBUSY;
-	}
-
-	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
-
-	if (!dr) {
-		dbg("kmalloc() failed");
-		return -ENOMEM;
-	}
-
-	dr->bRequestType= requesttype;
-	dr->bRequest = request;
-	dr->wValue = cpu_to_le16p(&value);
-	dr->wIndex = cpu_to_le16p(&index);
-	dr->wLength = cpu_to_le16p(&size);
-
-	return kaweth_internal_control_msg(kaweth->dev,
-					pipe,
-					dr,
-					data,
-					size,
-					timeout);
-}
-
-/****************************************************************
- *     kaweth_read_configuration
- ****************************************************************/
-static int kaweth_read_configuration(struct kaweth_device *kaweth)
-{
-	int retval;
-
-	dbg("Reading kaweth configuration");
-
-	retval = kaweth_control(kaweth,
-				usb_rcvctrlpipe(kaweth->dev, 0),
-				KAWETH_COMMAND_GET_ETHERNET_DESC,
-				USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE,
-				0,
-				0,
-				(void *)&kaweth->configuration,
-				sizeof(kaweth->configuration),
-				KAWETH_CONTROL_TIMEOUT);
-
-	return retval;
-}
-
-/****************************************************************
- *     kaweth_set_urb_size
- ****************************************************************/
-static int kaweth_set_urb_size(struct kaweth_device *kaweth, __u16 urb_size)
-{
-	int retval;
-
-	dbg("Setting URB size to %d", (unsigned)urb_size);
-
-	retval = kaweth_control(kaweth,
-				usb_sndctrlpipe(kaweth->dev, 0),
-				KAWETH_COMMAND_SET_URB_SIZE,
-				USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
-				urb_size,
-				0,
-				(void *)&kaweth->scratch,
-				0,
-				KAWETH_CONTROL_TIMEOUT);
-
-	return retval;
-}
-
-/****************************************************************
- *     kaweth_set_sofs_wait
- ****************************************************************/
-static int kaweth_set_sofs_wait(struct kaweth_device *kaweth, __u16 sofs_wait)
-{
-	int retval;
-
-	dbg("Set SOFS wait to %d", (unsigned)sofs_wait);
-
-	retval = kaweth_control(kaweth,
-				usb_sndctrlpipe(kaweth->dev, 0),
-				KAWETH_COMMAND_SET_SOFS_WAIT,
-				USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
-				sofs_wait,
-				0,
-				(void *)&kaweth->scratch,
-				0,
-				KAWETH_CONTROL_TIMEOUT);
-
-	return retval;
-}
-
-/****************************************************************
- *     kaweth_set_receive_filter
- ****************************************************************/
-static int kaweth_set_receive_filter(struct kaweth_device *kaweth,
-				     __u16 receive_filter)
-{
-	int retval;
-
-	dbg("Set receive filter to %d", (unsigned)receive_filter);
-
-	retval = kaweth_control(kaweth,
-				usb_sndctrlpipe(kaweth->dev, 0),
-				KAWETH_COMMAND_SET_PACKET_FILTER,
-				USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
-				receive_filter,
-				0,
-				(void *)&kaweth->scratch,
-				0,
-				KAWETH_CONTROL_TIMEOUT);
-
-	return retval;
-}
-
-/****************************************************************
- *     kaweth_download_firmware
- ****************************************************************/
-static int kaweth_download_firmware(struct kaweth_device *kaweth,
-				    __u8 *data,
-				    __u16 data_len,
-				    __u8 interrupt,
-				    __u8 type)
-{
-	if(data_len > KAWETH_FIRMWARE_BUF_SIZE)	{
-		err("Firmware too big: %d", data_len);
-		return -ENOSPC;
-	}
-
-	memcpy(kaweth->firmware_buf, data, data_len);
-
-	kaweth->firmware_buf[2] = (data_len & 0xFF) - 7;
-	kaweth->firmware_buf[3] = data_len >> 8;
-	kaweth->firmware_buf[4] = type;
-	kaweth->firmware_buf[5] = interrupt;
-
-	dbg("High: %i, Low:%i", kaweth->firmware_buf[3],
-		   kaweth->firmware_buf[2]);
-
-	dbg("Downloading firmware at %p to kaweth device at %p",
-	    data,
-	    kaweth);
-	dbg("Firmware length: %d", data_len);
-
-	return kaweth_control(kaweth,
-		              usb_sndctrlpipe(kaweth->dev, 0),
-			      KAWETH_COMMAND_SCAN,
-			      USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
-			      0,
-			      0,
-			      (void *)kaweth->firmware_buf,
-			      data_len,
-			      KAWETH_CONTROL_TIMEOUT);
-}
-
-/****************************************************************
- *     kaweth_trigger_firmware
- ****************************************************************/
-static int kaweth_trigger_firmware(struct kaweth_device *kaweth,
-				   __u8 interrupt)
-{
-	kaweth->firmware_buf[0] = 0xB6;
-	kaweth->firmware_buf[1] = 0xC3;
-	kaweth->firmware_buf[2] = 0x01;
-	kaweth->firmware_buf[3] = 0x00;
-	kaweth->firmware_buf[4] = 0x06;
-	kaweth->firmware_buf[5] = interrupt;
-	kaweth->firmware_buf[6] = 0x00;
-	kaweth->firmware_buf[7] = 0x00;
-
-	dbg("Triggering firmware");
-
-	return kaweth_control(kaweth,
-			      usb_sndctrlpipe(kaweth->dev, 0),
-			      KAWETH_COMMAND_SCAN,
-			      USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
-			      0,
-			      0,
-			      (void *)kaweth->firmware_buf,
-			      8,
-			      KAWETH_CONTROL_TIMEOUT);
-}
-
-/****************************************************************
- *     kaweth_reset
- ****************************************************************/
-static int kaweth_reset(struct kaweth_device *kaweth)
-{
-	int result;
-
-	dbg("kaweth_reset(%p)", kaweth);
-	result = kaweth_control(kaweth,
-				usb_sndctrlpipe(kaweth->dev, 0),
-				USB_REQ_SET_CONFIGURATION,
-				0,
-				kaweth->dev->config[0].desc.bConfigurationValue,
-				0,
-				NULL,
-				0,
-				KAWETH_CONTROL_TIMEOUT);
-
-	mdelay(10);
-
-	dbg("kaweth_reset() returns %d.",result);
-
-	return result;
-}
-
-static void kaweth_usb_receive(struct urb *);
-static int kaweth_resubmit_rx_urb(struct kaweth_device *, gfp_t);
-
-/****************************************************************
-	int_callback
-*****************************************************************/
-
-static void kaweth_resubmit_int_urb(struct kaweth_device *kaweth, gfp_t mf)
-{
-	int status;
-
-	status = usb_submit_urb (kaweth->irq_urb, mf);
-	if (unlikely(status == -ENOMEM)) {
-		kaweth->suspend_lowmem_ctrl = 1;
-		schedule_delayed_work(&kaweth->lowmem_work, HZ/4);
-	} else {
-		kaweth->suspend_lowmem_ctrl = 0;
-	}
-
-	if (status)
-		err ("can't resubmit intr, %s-%s, status %d",
-				kaweth->dev->bus->bus_name,
-				kaweth->dev->devpath, status);
-}
-
-static void int_callback(struct urb *u)
-{
-	struct kaweth_device *kaweth = u->context;
-	int act_state;
-
-	switch (u->status) {
-	case 0:			/* success */
-		break;
-	case -ECONNRESET:	/* unlink */
-	case -ENOENT:
-	case -ESHUTDOWN:
-		return;
-	/* -EPIPE:  should clear the halt */
-	default:		/* error */
-		goto resubmit;
-	}
-
-	/* we check the link state to report changes */
-	if (kaweth->linkstate != (act_state = ( kaweth->intbuffer[STATE_OFFSET] | STATE_MASK) >> STATE_SHIFT)) {
-		if (act_state)
-			netif_carrier_on(kaweth->net);
-		else
-			netif_carrier_off(kaweth->net);
-
-		kaweth->linkstate = act_state;
-	}
-resubmit:
-	kaweth_resubmit_int_urb(kaweth, GFP_ATOMIC);
-}
-
-static void kaweth_resubmit_tl(struct work_struct *work)
-{
-	struct kaweth_device *kaweth =
-		container_of(work, struct kaweth_device, lowmem_work.work);
-
-	if (IS_BLOCKED(kaweth->status))
-		return;
-
-	if (kaweth->suspend_lowmem_rx)
-		kaweth_resubmit_rx_urb(kaweth, GFP_NOIO);
-
-	if (kaweth->suspend_lowmem_ctrl)
-		kaweth_resubmit_int_urb(kaweth, GFP_NOIO);
-}
-
-
-/****************************************************************
- *     kaweth_resubmit_rx_urb
- ****************************************************************/
-static int kaweth_resubmit_rx_urb(struct kaweth_device *kaweth,
-						gfp_t mem_flags)
-{
-	int result;
-
-	usb_fill_bulk_urb(kaweth->rx_urb,
-		      kaweth->dev,
-		      usb_rcvbulkpipe(kaweth->dev, 1),
-		      kaweth->rx_buf,
-		      KAWETH_BUF_SIZE,
-		      kaweth_usb_receive,
-		      kaweth);
-	kaweth->rx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-	kaweth->rx_urb->transfer_dma = kaweth->rxbufferhandle;
-
-	if((result = usb_submit_urb(kaweth->rx_urb, mem_flags))) {
-		if (result == -ENOMEM) {
-			kaweth->suspend_lowmem_rx = 1;
-			schedule_delayed_work(&kaweth->lowmem_work, HZ/4);
-		}
-		err("resubmitting rx_urb %d failed", result);
-	} else {
-		kaweth->suspend_lowmem_rx = 0;
-	}
-
-	return result;
-}
-
-static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth);
-
-/****************************************************************
- *     kaweth_usb_receive
- ****************************************************************/
-static void kaweth_usb_receive(struct urb *urb)
-{
-	struct kaweth_device *kaweth = urb->context;
-	struct net_device *net = kaweth->net;
-
-	int count = urb->actual_length;
-	int count2 = urb->transfer_buffer_length;
-
-	__u16 pkt_len = le16_to_cpup((__le16 *)kaweth->rx_buf);
-
-	struct sk_buff *skb;
-
-	if(unlikely(urb->status == -ECONNRESET || urb->status == -ESHUTDOWN))
-	/* we are killed - set a flag and wake the disconnect handler */
-	{
-		kaweth->end = 1;
-		wake_up(&kaweth->term_wait);
-		return;
-	}
-
-	spin_lock(&kaweth->device_lock);
-	if (IS_BLOCKED(kaweth->status)) {
-		spin_unlock(&kaweth->device_lock);
-		return;
-	}
-	spin_unlock(&kaweth->device_lock);
-
-	if(urb->status && urb->status != -EREMOTEIO && count != 1) {
-		err("%s RX status: %d count: %d packet_len: %d",
-                           net->name,
-			   urb->status,
-			   count,
-			   (int)pkt_len);
-		kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
-                return;
-	}
-
-	if(kaweth->net && (count > 2)) {
-		if(pkt_len > (count - 2)) {
-			err("Packet length too long for USB frame (pkt_len: %x, count: %x)",pkt_len, count);
-			err("Packet len & 2047: %x", pkt_len & 2047);
-			err("Count 2: %x", count2);
-		        kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
-                        return;
-                }
-
-		if(!(skb = dev_alloc_skb(pkt_len+2))) {
-		        kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
-                        return;
-		}
-
-		skb_reserve(skb, 2);    /* Align IP on 16 byte boundaries */
-
-		eth_copy_and_sum(skb, kaweth->rx_buf + 2, pkt_len, 0);
-
-		skb_put(skb, pkt_len);
-
-		skb->protocol = eth_type_trans(skb, net);
-
-		netif_rx(skb);
-
-		kaweth->stats.rx_packets++;
-		kaweth->stats.rx_bytes += pkt_len;
-	}
-
-	kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
-}
-
-/****************************************************************
- *     kaweth_open
- ****************************************************************/
-static int kaweth_open(struct net_device *net)
-{
-	struct kaweth_device *kaweth = netdev_priv(net);
-	int res;
-
-	dbg("Opening network device.");
-
-	res = usb_autopm_get_interface(kaweth->intf);
-	if (res) {
-		err("Interface cannot be resumed.");
-		return -EIO;
-	}
-	res = kaweth_resubmit_rx_urb(kaweth, GFP_KERNEL);
-	if (res)
-		goto err_out;
-
-	usb_fill_int_urb(
-		kaweth->irq_urb,
-		kaweth->dev,
-		usb_rcvintpipe(kaweth->dev, 3),
-		kaweth->intbuffer,
-		INTBUFFERSIZE,
-		int_callback,
-		kaweth,
-		250); /* overriding the descriptor */
-	kaweth->irq_urb->transfer_dma = kaweth->intbufferhandle;
-	kaweth->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	res = usb_submit_urb(kaweth->irq_urb, GFP_KERNEL);
-	if (res) {
-		usb_kill_urb(kaweth->rx_urb);
-		goto err_out;
-	}
-	kaweth->opened = 1;
-
-	netif_start_queue(net);
-
-	kaweth_async_set_rx_mode(kaweth);
-	return 0;
-
-err_out:
-	usb_autopm_enable(kaweth->intf);
-	return -EIO;
-}
-
-/****************************************************************
- *     kaweth_kill_urbs
- ****************************************************************/
-static void kaweth_kill_urbs(struct kaweth_device *kaweth)
-{
-	usb_kill_urb(kaweth->irq_urb);
-	usb_kill_urb(kaweth->rx_urb);
-	usb_kill_urb(kaweth->tx_urb);
-
-	flush_scheduled_work();
-
-	/* a scheduled work may have resubmitted,
-	   we hit them again */
-	usb_kill_urb(kaweth->irq_urb);
-	usb_kill_urb(kaweth->rx_urb);
-}
-
-/****************************************************************
- *     kaweth_close
- ****************************************************************/
-static int kaweth_close(struct net_device *net)
-{
-	struct kaweth_device *kaweth = netdev_priv(net);
-
-	netif_stop_queue(net);
-	kaweth->opened = 0;
-
-	kaweth->status |= KAWETH_STATUS_CLOSING;
-
-	kaweth_kill_urbs(kaweth);
-
-	kaweth->status &= ~KAWETH_STATUS_CLOSING;
-
-	usb_autopm_enable(kaweth->intf);
-
-	return 0;
-}
-
-static void kaweth_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
-	struct kaweth_device *kaweth = netdev_priv(dev);
-
-	strlcpy(info->driver, driver_name, sizeof(info->driver));
-	usb_make_path(kaweth->dev, info->bus_info, sizeof (info->bus_info));
-}
-
-static u32 kaweth_get_link(struct net_device *dev)
-{
-	struct kaweth_device *kaweth = netdev_priv(dev);
-
-	return kaweth->linkstate;
-}
-
-static struct ethtool_ops ops = {
-	.get_drvinfo	= kaweth_get_drvinfo,
-	.get_link	= kaweth_get_link
-};
-
-/****************************************************************
- *     kaweth_usb_transmit_complete
- ****************************************************************/
-static void kaweth_usb_transmit_complete(struct urb *urb)
-{
-	struct kaweth_device *kaweth = urb->context;
-	struct sk_buff *skb = kaweth->tx_skb;
-
-	if (unlikely(urb->status != 0))
-		if (urb->status != -ENOENT)
-			dbg("%s: TX status %d.", kaweth->net->name, urb->status);
-
-	netif_wake_queue(kaweth->net);
-	dev_kfree_skb_irq(skb);
-}
-
-/****************************************************************
- *     kaweth_start_xmit
- ****************************************************************/
-static int kaweth_start_xmit(struct sk_buff *skb, struct net_device *net)
-{
-	struct kaweth_device *kaweth = netdev_priv(net);
-	__le16 *private_header;
-
-	int res;
-
-	spin_lock(&kaweth->device_lock);
-
-	kaweth_async_set_rx_mode(kaweth);
-	netif_stop_queue(net);
-	if (IS_BLOCKED(kaweth->status)) {
-		goto skip;
-	}
-
-	/* We now decide whether we can put our special header into the sk_buff */
-	if (skb_cloned(skb) || skb_headroom(skb) < 2) {
-		/* no such luck - we make our own */
-		struct sk_buff *copied_skb;
-		copied_skb = skb_copy_expand(skb, 2, 0, GFP_ATOMIC);
-		dev_kfree_skb_irq(skb);
-		skb = copied_skb;
-		if (!copied_skb) {
-			kaweth->stats.tx_errors++;
-			netif_start_queue(net);
-			spin_unlock(&kaweth->device_lock);
-			return 0;
-		}
-	}
-
-	private_header = (__le16 *)__skb_push(skb, 2);
-	*private_header = cpu_to_le16(skb->len-2);
-	kaweth->tx_skb = skb;
-
-	usb_fill_bulk_urb(kaweth->tx_urb,
-		      kaweth->dev,
-		      usb_sndbulkpipe(kaweth->dev, 2),
-		      private_header,
-		      skb->len,
-		      kaweth_usb_transmit_complete,
-		      kaweth);
-	kaweth->end = 0;
-
-	if((res = usb_submit_urb(kaweth->tx_urb, GFP_ATOMIC)))
-	{
-		warn("kaweth failed tx_urb %d", res);
-skip:
-		kaweth->stats.tx_errors++;
-
-		netif_start_queue(net);
-		dev_kfree_skb_irq(skb);
-	}
-	else
-	{
-		kaweth->stats.tx_packets++;
-		kaweth->stats.tx_bytes += skb->len;
-		net->trans_start = jiffies;
-	}
-
-	spin_unlock(&kaweth->device_lock);
-
-	return 0;
-}
-
-/****************************************************************
- *     kaweth_set_rx_mode
- ****************************************************************/
-static void kaweth_set_rx_mode(struct net_device *net)
-{
-	struct kaweth_device *kaweth = netdev_priv(net);
-
-	__u16 packet_filter_bitmap = KAWETH_PACKET_FILTER_DIRECTED |
-                                     KAWETH_PACKET_FILTER_BROADCAST |
-		                     KAWETH_PACKET_FILTER_MULTICAST;
-
-	dbg("Setting Rx mode to %d", packet_filter_bitmap);
-
-	netif_stop_queue(net);
-
-	if (net->flags & IFF_PROMISC) {
-		packet_filter_bitmap |= KAWETH_PACKET_FILTER_PROMISCUOUS;
-	}
-	else if ((net->mc_count) || (net->flags & IFF_ALLMULTI)) {
-		packet_filter_bitmap |= KAWETH_PACKET_FILTER_ALL_MULTICAST;
-	}
-
-	kaweth->packet_filter_bitmap = packet_filter_bitmap;
-	netif_wake_queue(net);
-}
-
-/****************************************************************
- *     kaweth_async_set_rx_mode
- ****************************************************************/
-static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth)
-{
-	__u16 packet_filter_bitmap = kaweth->packet_filter_bitmap;
-	kaweth->packet_filter_bitmap = 0;
-	if (packet_filter_bitmap == 0)
-		return;
-
-	{
-	int result;
-	result = kaweth_control(kaweth,
-				usb_sndctrlpipe(kaweth->dev, 0),
-				KAWETH_COMMAND_SET_PACKET_FILTER,
-				USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
-				packet_filter_bitmap,
-				0,
-				(void *)&kaweth->scratch,
-				0,
-				KAWETH_CONTROL_TIMEOUT);
-
-	if(result < 0) {
-		err("Failed to set Rx mode: %d", result);
-	}
-	else {
-		dbg("Set Rx mode to %d", packet_filter_bitmap);
-	}
-	}
-}
-
-/****************************************************************
- *     kaweth_netdev_stats
- ****************************************************************/
-static struct net_device_stats *kaweth_netdev_stats(struct net_device *dev)
-{
-	struct kaweth_device *kaweth = netdev_priv(dev);
-	return &kaweth->stats;
-}
-
-/****************************************************************
- *     kaweth_tx_timeout
- ****************************************************************/
-static void kaweth_tx_timeout(struct net_device *net)
-{
-	struct kaweth_device *kaweth = netdev_priv(net);
-
-	warn("%s: Tx timed out. Resetting.", net->name);
-	kaweth->stats.tx_errors++;
-	net->trans_start = jiffies;
-
-	usb_unlink_urb(kaweth->tx_urb);
-}
-
-/****************************************************************
- *     kaweth_suspend
- ****************************************************************/
-static int kaweth_suspend(struct usb_interface *intf, pm_message_t message)
-{
-	struct kaweth_device *kaweth = usb_get_intfdata(intf);
-	unsigned long flags;
-
-	dbg("Suspending device");
-	spin_lock_irqsave(&kaweth->device_lock, flags);
-	kaweth->status |= KAWETH_STATUS_SUSPENDING;
-	spin_unlock_irqrestore(&kaweth->device_lock, flags);
-
-	kaweth_kill_urbs(kaweth);
-	return 0;
-}
-
-/****************************************************************
- *     kaweth_resume
- ****************************************************************/
-static int kaweth_resume(struct usb_interface *intf)
-{
-	struct kaweth_device *kaweth = usb_get_intfdata(intf);
-	unsigned long flags;
-
-	dbg("Resuming device");
-	spin_lock_irqsave(&kaweth->device_lock, flags);
-	kaweth->status &= ~KAWETH_STATUS_SUSPENDING;
-	spin_unlock_irqrestore(&kaweth->device_lock, flags);
-
-	if (!kaweth->opened)
-		return 0;
-	kaweth_resubmit_rx_urb(kaweth, GFP_NOIO);
-	kaweth_resubmit_int_urb(kaweth, GFP_NOIO);
-
-	return 0;
-}
-
-/****************************************************************
- *     kaweth_probe
- ****************************************************************/
-static int kaweth_probe(
-		struct usb_interface *intf,
-		const struct usb_device_id *id      /* from id_table */
-	)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct kaweth_device *kaweth;
-	struct net_device *netdev;
-	const eth_addr_t bcast_addr = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
-	int result = 0;
-
-	dbg("Kawasaki Device Probe (Device number:%d): 0x%4.4x:0x%4.4x:0x%4.4x",
-		 dev->devnum,
-		 le16_to_cpu(dev->descriptor.idVendor),
-		 le16_to_cpu(dev->descriptor.idProduct),
-		 le16_to_cpu(dev->descriptor.bcdDevice));
-
-	dbg("Device at %p", dev);
-
-	dbg("Descriptor length: %x type: %x",
-		 (int)dev->descriptor.bLength,
-		 (int)dev->descriptor.bDescriptorType);
-
-	netdev = alloc_etherdev(sizeof(*kaweth));
-	if (!netdev)
-		return -ENOMEM;
-
-	kaweth = netdev_priv(netdev);
-	kaweth->dev = dev;
-	kaweth->net = netdev;
-
-	spin_lock_init(&kaweth->device_lock);
-	init_waitqueue_head(&kaweth->term_wait);
-
-	dbg("Resetting.");
-
-	kaweth_reset(kaweth);
-
-	/*
-	 * If high byte of bcdDevice is nonzero, firmware is already
-	 * downloaded. Don't try to do it again, or we'll hang the device.
-	 */
-
-	if (le16_to_cpu(dev->descriptor.bcdDevice) >> 8) {
-		info("Firmware present in device.");
-	} else {
-		/* Download the firmware */
-		info("Downloading firmware...");
-		kaweth->firmware_buf = (__u8 *)__get_free_page(GFP_KERNEL);
-		if ((result = kaweth_download_firmware(kaweth,
-						      kaweth_new_code,
-						      len_kaweth_new_code,
-						      100,
-						      2)) < 0) {
-			err("Error downloading firmware (%d)", result);
-			goto err_fw;
-		}
-
-		if ((result = kaweth_download_firmware(kaweth,
-						      kaweth_new_code_fix,
-						      len_kaweth_new_code_fix,
-						      100,
-						      3)) < 0) {
-			err("Error downloading firmware fix (%d)", result);
-			goto err_fw;
-		}
-
-		if ((result = kaweth_download_firmware(kaweth,
-						      kaweth_trigger_code,
-						      len_kaweth_trigger_code,
-						      126,
-						      2)) < 0) {
-			err("Error downloading trigger code (%d)", result);
-			goto err_fw;
-
-		}
-
-		if ((result = kaweth_download_firmware(kaweth,
-						      kaweth_trigger_code_fix,
-						      len_kaweth_trigger_code_fix,
-						      126,
-						      3)) < 0) {
-			err("Error downloading trigger code fix (%d)", result);
-			goto err_fw;
-		}
-
-
-		if ((result = kaweth_trigger_firmware(kaweth, 126)) < 0) {
-			err("Error triggering firmware (%d)", result);
-			goto err_fw;
-		}
-
-		/* Device will now disappear for a moment...  */
-		info("Firmware loaded.  I'll be back...");
-err_fw:
-		free_page((unsigned long)kaweth->firmware_buf);
-		free_netdev(netdev);
-		return -EIO;
-	}
-
-	result = kaweth_read_configuration(kaweth);
-
-	if(result < 0) {
-		err("Error reading configuration (%d), no net device created", result);
-		goto err_free_netdev;
-	}
-
-	info("Statistics collection: %x", kaweth->configuration.statistics_mask);
-	info("Multicast filter limit: %x", kaweth->configuration.max_multicast_filters & ((1 << 15) - 1));
-	info("MTU: %d", le16_to_cpu(kaweth->configuration.segment_size));
-	info("Read MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x",
-		 (int)kaweth->configuration.hw_addr[0],
-		 (int)kaweth->configuration.hw_addr[1],
-		 (int)kaweth->configuration.hw_addr[2],
-		 (int)kaweth->configuration.hw_addr[3],
-		 (int)kaweth->configuration.hw_addr[4],
-		 (int)kaweth->configuration.hw_addr[5]);
-
-	if(!memcmp(&kaweth->configuration.hw_addr,
-                   &bcast_addr,
-		   sizeof(bcast_addr))) {
-		err("Firmware not functioning properly, no net device created");
-		goto err_free_netdev;
-	}
-
-	if(kaweth_set_urb_size(kaweth, KAWETH_BUF_SIZE) < 0) {
-		dbg("Error setting URB size");
-		goto err_free_netdev;
-	}
-
-	if(kaweth_set_sofs_wait(kaweth, KAWETH_SOFS_TO_WAIT) < 0) {
-		err("Error setting SOFS wait");
-		goto err_free_netdev;
-	}
-
-	result = kaweth_set_receive_filter(kaweth,
-                                           KAWETH_PACKET_FILTER_DIRECTED |
-                                           KAWETH_PACKET_FILTER_BROADCAST |
-                                           KAWETH_PACKET_FILTER_MULTICAST);
-
-	if(result < 0) {
-		err("Error setting receive filter");
-		goto err_free_netdev;
-	}
-
-	dbg("Initializing net device.");
-
-	kaweth->intf = intf;
-
-	kaweth->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!kaweth->tx_urb)
-		goto err_free_netdev;
-	kaweth->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!kaweth->rx_urb)
-		goto err_only_tx;
-	kaweth->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!kaweth->irq_urb)
-		goto err_tx_and_rx;
-
-	kaweth->intbuffer = usb_buffer_alloc(	kaweth->dev,
-						INTBUFFERSIZE,
-						GFP_KERNEL,
-						&kaweth->intbufferhandle);
-	if (!kaweth->intbuffer)
-		goto err_tx_and_rx_and_irq;
-	kaweth->rx_buf = usb_buffer_alloc(	kaweth->dev,
-						KAWETH_BUF_SIZE,
-						GFP_KERNEL,
-						&kaweth->rxbufferhandle);
-	if (!kaweth->rx_buf)
-		goto err_all_but_rxbuf;
-
-	memcpy(netdev->broadcast, &bcast_addr, sizeof(bcast_addr));
-	memcpy(netdev->dev_addr, &kaweth->configuration.hw_addr,
-               sizeof(kaweth->configuration.hw_addr));
-
-	netdev->open = kaweth_open;
-	netdev->stop = kaweth_close;
-
-	netdev->watchdog_timeo = KAWETH_TX_TIMEOUT;
-	netdev->tx_timeout = kaweth_tx_timeout;
-
-	netdev->hard_start_xmit = kaweth_start_xmit;
-	netdev->set_multicast_list = kaweth_set_rx_mode;
-	netdev->get_stats = kaweth_netdev_stats;
-	netdev->mtu = le16_to_cpu(kaweth->configuration.segment_size);
-	SET_ETHTOOL_OPS(netdev, &ops);
-
-	/* kaweth is zeroed as part of alloc_netdev */
-
-	INIT_DELAYED_WORK(&kaweth->lowmem_work, kaweth_resubmit_tl);
-
-	SET_MODULE_OWNER(netdev);
-
-	usb_set_intfdata(intf, kaweth);
-
-#if 0
-// dma_supported() is deeply broken on almost all architectures
-	if (dma_supported (&intf->dev, 0xffffffffffffffffULL))
-		kaweth->net->features |= NETIF_F_HIGHDMA;
-#endif
-
-	SET_NETDEV_DEV(netdev, &intf->dev);
-	if (register_netdev(netdev) != 0) {
-		err("Error registering netdev.");
-		goto err_intfdata;
-	}
-
-	info("kaweth interface created at %s", kaweth->net->name);
-
-	dbg("Kaweth probe returning.");
-
-	return 0;
-
-err_intfdata:
-	usb_set_intfdata(intf, NULL);
-	usb_buffer_free(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle);
-err_all_but_rxbuf:
-	usb_buffer_free(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle);
-err_tx_and_rx_and_irq:
-	usb_free_urb(kaweth->irq_urb);
-err_tx_and_rx:
-	usb_free_urb(kaweth->rx_urb);
-err_only_tx:
-	usb_free_urb(kaweth->tx_urb);
-err_free_netdev:
-	free_netdev(netdev);
-
-	return -EIO;
-}
-
-/****************************************************************
- *     kaweth_disconnect
- ****************************************************************/
-static void kaweth_disconnect(struct usb_interface *intf)
-{
-	struct kaweth_device *kaweth = usb_get_intfdata(intf);
-	struct net_device *netdev;
-
-	info("Unregistering");
-
-	usb_set_intfdata(intf, NULL);
-	if (!kaweth) {
-		warn("unregistering non-existant device");
-		return;
-	}
-	netdev = kaweth->net;
-
-	dbg("Unregistering net device");
-	unregister_netdev(netdev);
-
-	usb_free_urb(kaweth->rx_urb);
-	usb_free_urb(kaweth->tx_urb);
-	usb_free_urb(kaweth->irq_urb);
-
-	usb_buffer_free(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle);
-	usb_buffer_free(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle);
-
-	free_netdev(netdev);
-}
-
-
-// FIXME this completion stuff is a modified clone of
-// an OLD version of some stuff in usb.c ...
-struct usb_api_data {
-	wait_queue_head_t wqh;
-	int done;
-};
-
-/*-------------------------------------------------------------------*
- * completion handler for compatibility wrappers (sync control/bulk) *
- *-------------------------------------------------------------------*/
-static void usb_api_blocking_completion(struct urb *urb)
-{
-        struct usb_api_data *awd = (struct usb_api_data *)urb->context;
-
-	awd->done=1;
-	wake_up(&awd->wqh);
-}
-
-/*-------------------------------------------------------------------*
- *                         COMPATIBILITY STUFF                       *
- *-------------------------------------------------------------------*/
-
-// Starts urb and waits for completion or timeout
-static int usb_start_wait_urb(struct urb *urb, int timeout, int* actual_length)
-{
-	struct usb_api_data awd;
-        int status;
-
-        init_waitqueue_head(&awd.wqh);
-        awd.done = 0;
-
-        urb->context = &awd;
-        status = usb_submit_urb(urb, GFP_NOIO);
-        if (status) {
-                // something went wrong
-                usb_free_urb(urb);
-                return status;
-        }
-
-	if (!wait_event_timeout(awd.wqh, awd.done, timeout)) {
-                // timeout
-                warn("usb_control/bulk_msg: timeout");
-                usb_kill_urb(urb);  // remove urb safely
-                status = -ETIMEDOUT;
-        }
-	else {
-                status = urb->status;
-	}
-
-        if (actual_length) {
-                *actual_length = urb->actual_length;
-	}
-
-        usb_free_urb(urb);
-        return status;
-}
-
-/*-------------------------------------------------------------------*/
-// returns status (negative) or length (positive)
-static int kaweth_internal_control_msg(struct usb_device *usb_dev,
-				       unsigned int pipe,
-				       struct usb_ctrlrequest *cmd, void *data,
-				       int len, int timeout)
-{
-        struct urb *urb;
-        int retv;
-        int length = 0; /* shut up GCC */
-
-        urb = usb_alloc_urb(0, GFP_NOIO);
-        if (!urb)
-                return -ENOMEM;
-
-        usb_fill_control_urb(urb, usb_dev, pipe, (unsigned char*)cmd, data,
-			 len, usb_api_blocking_completion, NULL);
-
-        retv = usb_start_wait_urb(urb, timeout, &length);
-        if (retv < 0) {
-                return retv;
-	}
-        else {
-                return length;
-	}
-}
-
-
-/****************************************************************
- *     kaweth_init
- ****************************************************************/
-static int __init kaweth_init(void)
-{
-	dbg("Driver loading");
-	return usb_register(&kaweth_driver);
-}
-
-/****************************************************************
- *     kaweth_exit
- ****************************************************************/
-static void __exit kaweth_exit(void)
-{
-	usb_deregister(&kaweth_driver);
-}
-
-module_init(kaweth_init);
-module_exit(kaweth_exit);
-
-
-
-
-
-
-
-
-
diff --git a/drivers/usb/net/kawethfw.h b/drivers/usb/net/kawethfw.h
deleted file mode 100644
index cf85fcb0d1a..00000000000
--- a/drivers/usb/net/kawethfw.h
+++ /dev/null
@@ -1,557 +0,0 @@
-/******************************************/
-/* NOTE: B6/C3 is data header signature   */
-/*       0xAA/0xBB is data length = total */
-/*       bytes - 7, 0xCC is type, 0xDD is */
-/*       interrupt to use.                */
-/******************************************/
-
-/****************************************************************
- *     kaweth_trigger_code
- ****************************************************************/
-static __u8 kaweth_trigger_code[] = 
-{
-    0xB6, 0xC3, 0xAA, 0xBB, 0xCC, 0xDD,
-    0xc8, 0x07, 0xa0, 0x00, 0xf0, 0x07, 0x5e, 0x00,
-    0x06, 0x00, 0xf0, 0x07, 0x0a, 0x00, 0x08, 0x00,
-    0xf0, 0x09, 0x00, 0x00, 0x02, 0x00, 0xe7, 0x07,
-    0x36, 0x00, 0x00, 0x00, 0xf0, 0x07, 0x00, 0x00,
-    0x04, 0x00, 0xe7, 0x07, 0x50, 0xc3, 0x10, 0xc0,
-    0xf0, 0x09, 0x0e, 0xc0, 0x00, 0x00, 0xe7, 0x87,
-    0x01, 0x00, 0x0e, 0xc0, 0x97, 0xcf, 0xd7, 0x09,
-    0x00, 0xc0, 0x17, 0x02, 0xc8, 0x07, 0xa0, 0x00,
-    0xe7, 0x17, 0x50, 0xc3, 0x10, 0xc0, 0x30, 0xd8,
-    0x04, 0x00, 0x30, 0x5c, 0x08, 0x00, 0x04, 0x00,
-    0xb0, 0xc0, 0x06, 0x00, 0xc8, 0x05, 0xe7, 0x05,
-    0x00, 0xc0, 0xc0, 0xdf, 0x97, 0xcf, 0x49, 0xaf,
-    0xc0, 0x07, 0x00, 0x00, 0x60, 0xaf, 0x4a, 0xaf,
-    0x00, 0x0c, 0x0c, 0x00, 0x40, 0xd2, 0x00, 0x1c,
-    0x0c, 0x00, 0x40, 0xd2, 0x30, 0x00, 0x08, 0x00,
-    0xf0, 0x07, 0x00, 0x00, 0x04, 0x00, 0xf0, 0x07,
-    0x86, 0x00, 0x06, 0x00, 0x67, 0xcf, 0x27, 0x0c,
-    0x02, 0x00, 0x00, 0x00, 0x27, 0x0c, 0x00, 0x00,
-    0x0e, 0xc0, 0x49, 0xaf, 0x64, 0xaf, 0xc0, 0x07,
-    0x00, 0x00, 0x4b, 0xaf, 0x4a, 0xaf, 0x5a, 0xcf,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x94, 0x00, 0x05, 0x00,
-    0x00, 0x00
-};
-/****************************************************************
- *     kaweth_trigger_code_fix
- ****************************************************************/
-static __u8 kaweth_trigger_code_fix[] = 
-{
-    0xB6, 0xC3, 0xAA, 0xBB, 0xCC, 0xDD,
-    0x02, 0x00, 0x06, 0x00, 0x18, 0x00, 0x3e, 0x00,
-    0x80, 0x00, 0x98, 0x00, 0xaa, 0x00,
-    0x00, 0x00
-};
-
-/****************************************************************
- *     kaweth_new_code
- ****************************************************************/
-static __u8 kaweth_new_code[] = 
-{
-    0xB6, 0xC3, 0xAA, 0xBB, 0xCC, 0xDD,
-    0x9f, 0xcf, 0xde, 0x06, 0xe7, 0x57, 0x00, 0x00,
-    0xc4, 0x06, 0x97, 0xc1, 0xe7, 0x67, 0xff, 0x1f,
-    0x28, 0xc0, 0xe7, 0x87, 0x00, 0x04, 0x24, 0xc0,
-    0xe7, 0x67, 0xff, 0xf9, 0x22, 0xc0, 0x97, 0xcf,
-    0xd7, 0x09, 0x00, 0xc0, 0xe7, 0x09, 0xa2, 0xc0,
-    0xbe, 0x06, 0x9f, 0xaf, 0x36, 0x00, 0xe7, 0x05,
-    0x00, 0xc0, 0xa7, 0xcf, 0xbc, 0x06, 0x97, 0xcf,
-    0xe7, 0x57, 0x00, 0x00, 0xb8, 0x06, 0xa7, 0xa1,
-    0xb8, 0x06, 0x97, 0xcf, 0xe7, 0x57, 0x00, 0x00,
-    0x14, 0x08, 0x0a, 0xc0, 0xe7, 0x57, 0x00, 0x00,
-    0xa4, 0xc0, 0xa7, 0xc0, 0x7a, 0x06, 0x9f, 0xaf,
-    0x92, 0x07, 0xe7, 0x07, 0x00, 0x00, 0x14, 0x08,
-    0xe7, 0x57, 0xff, 0xff, 0xba, 0x06, 0x9f, 0xa0,
-    0x38, 0x00, 0xe7, 0x59, 0xba, 0x06, 0xbe, 0x06,
-    0x9f, 0xa0, 0x38, 0x00, 0xc8, 0x09, 0xca, 0x06,
-    0x08, 0x62, 0x9f, 0xa1, 0x36, 0x08, 0xc0, 0x09,
-    0x76, 0x06, 0x00, 0x60, 0xa7, 0xc0, 0x7a, 0x06,
-    0x9f, 0xaf, 0xcc, 0x02, 0xe7, 0x57, 0x00, 0x00,
-    0xb8, 0x06, 0xa7, 0xc1, 0x7a, 0x06, 0x9f, 0xaf,
-    0x04, 0x00, 0xe7, 0x57, 0x00, 0x00, 0x8e, 0x06,
-    0x0a, 0xc1, 0xe7, 0x09, 0x20, 0xc0, 0x10, 0x08,
-    0xe7, 0xd0, 0x10, 0x08, 0xe7, 0x67, 0x40, 0x00,
-    0x10, 0x08, 0x9f, 0xaf, 0x92, 0x0c, 0xc0, 0x09,
-    0xd0, 0x06, 0x00, 0x60, 0x05, 0xc4, 0xc0, 0x59,
-    0xbe, 0x06, 0x02, 0xc0, 0x9f, 0xaf, 0xec, 0x00,
-    0x9f, 0xaf, 0x34, 0x02, 0xe7, 0x57, 0x00, 0x00,
-    0xa6, 0x06, 0x9f, 0xa0, 0x7a, 0x02, 0xa7, 0xcf,
-    0x7a, 0x06, 0x48, 0x02, 0xe7, 0x09, 0xbe, 0x06,
-    0xd0, 0x06, 0xc8, 0x37, 0x04, 0x00, 0x9f, 0xaf,
-    0x08, 0x03, 0x97, 0xcf, 0xe7, 0x57, 0x00, 0x00,
-    0xce, 0x06, 0x97, 0xc0, 0xd7, 0x09, 0x00, 0xc0,
-    0xc1, 0xdf, 0xc8, 0x09, 0xc6, 0x06, 0x08, 0x62,
-    0x14, 0xc0, 0x27, 0x04, 0xc6, 0x06, 0x10, 0x94,
-    0xf0, 0x07, 0x10, 0x08, 0x02, 0x00, 0xc1, 0x07,
-    0x01, 0x00, 0x70, 0x00, 0x04, 0x00, 0xf0, 0x07,
-    0x30, 0x01, 0x06, 0x00, 0x50, 0xaf, 0xe7, 0x07,
-    0xff, 0xff, 0xd0, 0x06, 0xe7, 0x07, 0x00, 0x00,
-    0xce, 0x06, 0xe7, 0x05, 0x00, 0xc0, 0x97, 0xcf,
-    0xd7, 0x09, 0x00, 0xc0, 0xc1, 0xdf, 0x48, 0x02,
-    0xd0, 0x09, 0xc6, 0x06, 0x27, 0x02, 0xc6, 0x06,
-    0xe7, 0x05, 0x00, 0xc0, 0x97, 0xcf, 0x48, 0x02,
-    0xc8, 0x37, 0x04, 0x00, 0x00, 0x0c, 0x0c, 0x00,
-    0x00, 0x60, 0x21, 0xc0, 0xc0, 0x37, 0x3e, 0x00,
-    0x23, 0xc9, 0xc0, 0x57, 0xb4, 0x05, 0x1b, 0xc8,
-    0xc0, 0x17, 0x3f, 0x00, 0xc0, 0x67, 0xc0, 0xff,
-    0x30, 0x00, 0x08, 0x00, 0xf0, 0x07, 0x00, 0x00,
-    0x04, 0x00, 0x00, 0x02, 0xc0, 0x17, 0x4c, 0x00,
-    0x30, 0x00, 0x06, 0x00, 0xf0, 0x07, 0xa0, 0x01,
-    0x0a, 0x00, 0x48, 0x02, 0xc1, 0x07, 0x02, 0x00,
-    0xd7, 0x09, 0x00, 0xc0, 0xc1, 0xdf, 0x51, 0xaf,
-    0xe7, 0x05, 0x00, 0xc0, 0x97, 0xcf, 0x9f, 0xaf,
-    0x08, 0x03, 0x9f, 0xaf, 0x7a, 0x02, 0x97, 0xcf,
-    0x9f, 0xaf, 0x7a, 0x02, 0xc9, 0x37, 0x04, 0x00,
-    0xc1, 0xdf, 0xc8, 0x09, 0xa2, 0x06, 0x50, 0x02,
-    0x67, 0x02, 0xa2, 0x06, 0xd1, 0x07, 0x00, 0x00,
-    0x27, 0xd8, 0xaa, 0x06, 0xc0, 0xdf, 0x9f, 0xaf,
-    0xc4, 0x01, 0x97, 0xcf, 0xe7, 0x57, 0x00, 0x00,
-    0xd2, 0x06, 0x97, 0xc1, 0xe7, 0x57, 0x01, 0x00,
-    0xa8, 0x06, 0x97, 0xc0, 0xc8, 0x09, 0xa0, 0x06,
-    0x08, 0x62, 0x97, 0xc0, 0x00, 0x02, 0xc0, 0x17,
-    0x0e, 0x00, 0x27, 0x00, 0x34, 0x01, 0x27, 0x0c,
-    0x0c, 0x00, 0x36, 0x01, 0xe7, 0x07, 0x50, 0xc3,
-    0x12, 0xc0, 0xe7, 0x07, 0xcc, 0x0b, 0x02, 0x00,
-    0xe7, 0x07, 0x01, 0x00, 0xa8, 0x06, 0xe7, 0x07,
-    0x05, 0x00, 0x90, 0xc0, 0x97, 0xcf, 0xc8, 0x09,
-    0xa4, 0x06, 0x08, 0x62, 0x02, 0xc0, 0x10, 0x64,
-    0x07, 0xc1, 0xe7, 0x07, 0x00, 0x00, 0x9e, 0x06,
-    0xe7, 0x07, 0x72, 0x04, 0x24, 0x00, 0x97, 0xcf,
-    0x27, 0x04, 0xa4, 0x06, 0xc8, 0x17, 0x0e, 0x00,
-    0x27, 0x02, 0x9e, 0x06, 0xe7, 0x07, 0x80, 0x04,
-    0x24, 0x00, 0x97, 0xcf, 0xd7, 0x09, 0x00, 0xc0,
-    0xc1, 0xdf, 0xe7, 0x57, 0x00, 0x00, 0x90, 0x06,
-    0x13, 0xc1, 0x9f, 0xaf, 0x06, 0x02, 0xe7, 0x57,
-    0x00, 0x00, 0x9e, 0x06, 0x13, 0xc0, 0xe7, 0x09,
-    0x9e, 0x06, 0x30, 0x01, 0xe7, 0x07, 0xf2, 0x05,
-    0x32, 0x01, 0xe7, 0x07, 0x10, 0x00, 0x96, 0xc0,
-    0xe7, 0x09, 0x9e, 0x06, 0x90, 0x06, 0x04, 0xcf,
-    0xe7, 0x57, 0x00, 0x00, 0x9e, 0x06, 0x02, 0xc1,
-    0x9f, 0xaf, 0x06, 0x02, 0xe7, 0x05, 0x00, 0xc0,
-    0x97, 0xcf, 0xd7, 0x09, 0x00, 0xc0, 0xc1, 0xdf,
-    0x08, 0x92, 0xe7, 0x57, 0x02, 0x00, 0xaa, 0x06,
-    0x02, 0xc3, 0xc8, 0x09, 0xa4, 0x06, 0x27, 0x02,
-    0xa6, 0x06, 0x08, 0x62, 0x03, 0xc1, 0xe7, 0x05,
-    0x00, 0xc0, 0x97, 0xcf, 0x27, 0x04, 0xa4, 0x06,
-    0xe7, 0x05, 0x00, 0xc0, 0xf0, 0x07, 0x40, 0x00,
-    0x08, 0x00, 0xf0, 0x07, 0x00, 0x00, 0x04, 0x00,
-    0x00, 0x02, 0xc0, 0x17, 0x0c, 0x00, 0x30, 0x00,
-    0x06, 0x00, 0xf0, 0x07, 0x46, 0x01, 0x0a, 0x00,
-    0xc8, 0x17, 0x04, 0x00, 0xc1, 0x07, 0x02, 0x00,
-    0x51, 0xaf, 0x97, 0xcf, 0xe7, 0x57, 0x00, 0x00,
-    0x96, 0x06, 0x97, 0xc0, 0xc1, 0xdf, 0xc8, 0x09,
-    0x96, 0x06, 0x27, 0x04, 0x96, 0x06, 0x27, 0x52,
-    0x98, 0x06, 0x03, 0xc1, 0xe7, 0x07, 0x96, 0x06,
-    0x98, 0x06, 0xc0, 0xdf, 0x17, 0x02, 0xc8, 0x17,
-    0x0e, 0x00, 0x9f, 0xaf, 0xba, 0x03, 0xc8, 0x05,
-    0x00, 0x60, 0x03, 0xc0, 0x9f, 0xaf, 0x24, 0x03,
-    0x97, 0xcf, 0x9f, 0xaf, 0x08, 0x03, 0x97, 0xcf,
-    0x57, 0x02, 0xc9, 0x07, 0xa4, 0x06, 0xd7, 0x09,
-    0x00, 0xc0, 0xc1, 0xdf, 0x08, 0x62, 0x1b, 0xc0,
-    0x50, 0x04, 0x11, 0x02, 0xe7, 0x05, 0x00, 0xc0,
-    0xc9, 0x05, 0x97, 0xcf, 0x97, 0x02, 0xca, 0x09,
-    0xd6, 0x06, 0xf2, 0x17, 0x01, 0x00, 0x04, 0x00,
-    0xf2, 0x27, 0x00, 0x00, 0x06, 0x00, 0xca, 0x17,
-    0x2c, 0x00, 0xf8, 0x77, 0x01, 0x00, 0x0e, 0x00,
-    0x06, 0xc0, 0xca, 0xd9, 0xf8, 0x57, 0xff, 0x00,
-    0x0e, 0x00, 0x01, 0xc1, 0xca, 0xd9, 0x22, 0x1c,
-    0x0c, 0x00, 0xe2, 0x27, 0x00, 0x00, 0xe2, 0x17,
-    0x01, 0x00, 0xe2, 0x27, 0x00, 0x00, 0xca, 0x05,
-    0x00, 0x0c, 0x0c, 0x00, 0xc0, 0x17, 0x41, 0x00,
-    0xc0, 0x67, 0xc0, 0xff, 0x30, 0x00, 0x08, 0x00,
-    0x00, 0x02, 0xc0, 0x17, 0x0c, 0x00, 0x30, 0x00,
-    0x06, 0x00, 0xf0, 0x07, 0xda, 0x00, 0x0a, 0x00,
-    0xf0, 0x07, 0x00, 0x00, 0x04, 0x00, 0x00, 0x0c,
-    0x08, 0x00, 0x40, 0xd1, 0x01, 0x00, 0xc0, 0x19,
-    0xce, 0x06, 0xc0, 0x59, 0xc2, 0x06, 0x04, 0xc9,
-    0x49, 0xaf, 0x9f, 0xaf, 0xec, 0x00, 0x4a, 0xaf,
-    0x67, 0x10, 0xce, 0x06, 0xc8, 0x17, 0x04, 0x00,
-    0xc1, 0x07, 0x01, 0x00, 0xd7, 0x09, 0x00, 0xc0,
-    0xc1, 0xdf, 0x50, 0xaf, 0xe7, 0x05, 0x00, 0xc0,
-    0x97, 0xcf, 0xc0, 0x07, 0x01, 0x00, 0xc1, 0x09,
-    0xac, 0x06, 0xc1, 0x77, 0x01, 0x00, 0x97, 0xc1,
-    0xd8, 0x77, 0x01, 0x00, 0x12, 0xc0, 0xc9, 0x07,
-    0x6a, 0x06, 0x9f, 0xaf, 0x08, 0x04, 0x04, 0xc1,
-    0xc1, 0x77, 0x08, 0x00, 0x13, 0xc0, 0x97, 0xcf,
-    0xc1, 0x77, 0x02, 0x00, 0x97, 0xc1, 0xc1, 0x77,
-    0x10, 0x00, 0x0c, 0xc0, 0x9f, 0xaf, 0x2c, 0x04,
-    0x97, 0xcf, 0xc1, 0x77, 0x04, 0x00, 0x06, 0xc0,
-    0xc9, 0x07, 0x70, 0x06, 0x9f, 0xaf, 0x08, 0x04,
-    0x97, 0xc0, 0x00, 0xcf, 0x00, 0x90, 0x97, 0xcf,
-    0x50, 0x54, 0x97, 0xc1, 0x70, 0x5c, 0x02, 0x00,
-    0x02, 0x00, 0x97, 0xc1, 0x70, 0x5c, 0x04, 0x00,
-    0x04, 0x00, 0x97, 0xcf, 0x80, 0x01, 0xc0, 0x00,
-    0x60, 0x00, 0x30, 0x00, 0x18, 0x00, 0x0c, 0x00,
-    0x06, 0x00, 0x00, 0x00, 0xcb, 0x09, 0xb2, 0x06,
-    0xcc, 0x09, 0xb4, 0x06, 0x0b, 0x53, 0x11, 0xc0,
-    0xc9, 0x02, 0xca, 0x07, 0x1c, 0x04, 0x9f, 0xaf,
-    0x08, 0x04, 0x97, 0xc0, 0x0a, 0xc8, 0x82, 0x08,
-    0x0a, 0xcf, 0x82, 0x08, 0x9f, 0xaf, 0x08, 0x04,
-    0x97, 0xc0, 0x05, 0xc2, 0x89, 0x30, 0x82, 0x60,
-    0x78, 0xc1, 0x00, 0x90, 0x97, 0xcf, 0x89, 0x10,
-    0x09, 0x53, 0x79, 0xc2, 0x89, 0x30, 0x82, 0x08,
-    0x7a, 0xcf, 0xc0, 0xdf, 0x97, 0xcf, 0xc0, 0xdf,
-    0x97, 0xcf, 0xe7, 0x09, 0x96, 0xc0, 0x92, 0x06,
-    0xe7, 0x09, 0x98, 0xc0, 0x94, 0x06, 0x0f, 0xcf,
-    0xe7, 0x09, 0x96, 0xc0, 0x92, 0x06, 0xe7, 0x09,
-    0x98, 0xc0, 0x94, 0x06, 0xe7, 0x09, 0x9e, 0x06,
-    0x30, 0x01, 0xe7, 0x07, 0xf2, 0x05, 0x32, 0x01,
-    0xe7, 0x07, 0x10, 0x00, 0x96, 0xc0, 0xd7, 0x09,
-    0x00, 0xc0, 0x17, 0x02, 0xc8, 0x09, 0x90, 0x06,
-    0xc8, 0x37, 0x0e, 0x00, 0xe7, 0x77, 0x2a, 0x00,
-    0x92, 0x06, 0x30, 0xc0, 0x97, 0x02, 0xca, 0x09,
-    0xd6, 0x06, 0xe7, 0x77, 0x20, 0x00, 0x92, 0x06,
-    0x0e, 0xc0, 0xf2, 0x17, 0x01, 0x00, 0x10, 0x00,
-    0xf2, 0x27, 0x00, 0x00, 0x12, 0x00, 0xe7, 0x77,
-    0x0a, 0x00, 0x92, 0x06, 0xca, 0x05, 0x1e, 0xc0,
-    0x97, 0x02, 0xca, 0x09, 0xd6, 0x06, 0xf2, 0x17,
-    0x01, 0x00, 0x0c, 0x00, 0xf2, 0x27, 0x00, 0x00,
-    0x0e, 0x00, 0xe7, 0x77, 0x02, 0x00, 0x92, 0x06,
-    0x07, 0xc0, 0xf2, 0x17, 0x01, 0x00, 0x44, 0x00,
-    0xf2, 0x27, 0x00, 0x00, 0x46, 0x00, 0x06, 0xcf,
-    0xf2, 0x17, 0x01, 0x00, 0x60, 0x00, 0xf2, 0x27,
-    0x00, 0x00, 0x62, 0x00, 0xca, 0x05, 0x9f, 0xaf,
-    0x08, 0x03, 0x0f, 0xcf, 0x57, 0x02, 0x09, 0x02,
-    0xf1, 0x09, 0x94, 0x06, 0x0c, 0x00, 0xf1, 0xda,
-    0x0c, 0x00, 0xc8, 0x09, 0x98, 0x06, 0x50, 0x02,
-    0x67, 0x02, 0x98, 0x06, 0xd1, 0x07, 0x00, 0x00,
-    0xc9, 0x05, 0xe7, 0x09, 0x9e, 0x06, 0x90, 0x06,
-    0xe7, 0x57, 0x00, 0x00, 0x90, 0x06, 0x02, 0xc0,
-    0x9f, 0xaf, 0x06, 0x02, 0xc8, 0x05, 0xe7, 0x05,
-    0x00, 0xc0, 0xc0, 0xdf, 0x97, 0xcf, 0xd7, 0x09,
-    0x00, 0xc0, 0x17, 0x00, 0x17, 0x02, 0x97, 0x02,
-    0xc0, 0x09, 0x92, 0xc0, 0xe7, 0x07, 0x04, 0x00,
-    0x90, 0xc0, 0xca, 0x09, 0xd6, 0x06, 0xe7, 0x07,
-    0x00, 0x00, 0xa8, 0x06, 0xe7, 0x07, 0x6a, 0x04,
-    0x02, 0x00, 0xc0, 0x77, 0x02, 0x00, 0x08, 0xc0,
-    0xf2, 0x17, 0x01, 0x00, 0x50, 0x00, 0xf2, 0x27,
-    0x00, 0x00, 0x52, 0x00, 0x9f, 0xcf, 0x24, 0x06,
-    0xc0, 0x77, 0x10, 0x00, 0x06, 0xc0, 0xf2, 0x17,
-    0x01, 0x00, 0x58, 0x00, 0xf2, 0x27, 0x00, 0x00,
-    0x5a, 0x00, 0xc0, 0x77, 0x80, 0x00, 0x06, 0xc0,
-    0xf2, 0x17, 0x01, 0x00, 0x70, 0x00, 0xf2, 0x27,
-    0x00, 0x00, 0x72, 0x00, 0xc0, 0x77, 0x08, 0x00,
-    0x1d, 0xc1, 0xf2, 0x17, 0x01, 0x00, 0x08, 0x00,
-    0xf2, 0x27, 0x00, 0x00, 0x0a, 0x00, 0xc0, 0x77,
-    0x00, 0x02, 0x06, 0xc0, 0xf2, 0x17, 0x01, 0x00,
-    0x64, 0x00, 0xf2, 0x27, 0x00, 0x00, 0x66, 0x00,
-    0xc0, 0x77, 0x40, 0x00, 0x06, 0xc0, 0xf2, 0x17,
-    0x01, 0x00, 0x5c, 0x00, 0xf2, 0x27, 0x00, 0x00,
-    0x5e, 0x00, 0xc0, 0x77, 0x01, 0x00, 0x01, 0xc0,
-    0x1b, 0xcf, 0x1a, 0xcf, 0xf2, 0x17, 0x01, 0x00,
-    0x00, 0x00, 0xf2, 0x27, 0x00, 0x00, 0x02, 0x00,
-    0xc8, 0x09, 0x34, 0x01, 0xca, 0x17, 0x14, 0x00,
-    0xd8, 0x77, 0x01, 0x00, 0x05, 0xc0, 0xca, 0xd9,
-    0xd8, 0x57, 0xff, 0x00, 0x01, 0xc0, 0xca, 0xd9,
-    0xe2, 0x19, 0x94, 0xc0, 0xe2, 0x27, 0x00, 0x00,
-    0xe2, 0x17, 0x01, 0x00, 0xe2, 0x27, 0x00, 0x00,
-    0x9f, 0xaf, 0x40, 0x06, 0x9f, 0xaf, 0xc4, 0x01,
-    0xe7, 0x57, 0x00, 0x00, 0xd2, 0x06, 0x9f, 0xa1,
-    0x0e, 0x0a, 0xca, 0x05, 0xc8, 0x05, 0xc0, 0x05,
-    0xe7, 0x05, 0x00, 0xc0, 0xc0, 0xdf, 0x97, 0xcf,
-    0xc8, 0x09, 0xa0, 0x06, 0x08, 0x62, 0x97, 0xc0,
-    0x27, 0x04, 0xa0, 0x06, 0x27, 0x52, 0xa2, 0x06,
-    0x03, 0xc1, 0xe7, 0x07, 0xa0, 0x06, 0xa2, 0x06,
-    0x9f, 0xaf, 0x08, 0x03, 0xe7, 0x57, 0x00, 0x00,
-    0xaa, 0x06, 0x02, 0xc0, 0x27, 0xda, 0xaa, 0x06,
-    0x97, 0xcf, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0xff, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-    0x00, 0x00, 0xff, 0xff, 0xfb, 0x13, 0xe7, 0x57,
-    0x00, 0x80, 0xb2, 0x00, 0x06, 0xc2, 0xe7, 0x07,
-    0xee, 0x0b, 0x12, 0x00, 0xe7, 0x07, 0x34, 0x0c,
-    0xb2, 0x00, 0xe7, 0x07, 0xc6, 0x07, 0xf2, 0x02,
-    0xc8, 0x09, 0xb4, 0x00, 0xf8, 0x07, 0x02, 0x00,
-    0x0d, 0x00, 0xd7, 0x09, 0x0e, 0xc0, 0xe7, 0x07,
-    0x00, 0x00, 0x0e, 0xc0, 0xc8, 0x09, 0xde, 0x00,
-    0xc8, 0x17, 0x09, 0x00, 0xc9, 0x07, 0xda, 0x06,
-    0xc0, 0x07, 0x04, 0x00, 0x68, 0x0a, 0x00, 0xda,
-    0x7d, 0xc1, 0xe7, 0x09, 0xc0, 0x00, 0x7c, 0x06,
-    0xe7, 0x09, 0xbe, 0x00, 0x78, 0x06, 0xe7, 0x09,
-    0x10, 0x00, 0xbc, 0x06, 0xc8, 0x07, 0xd6, 0x07,
-    0x9f, 0xaf, 0xae, 0x07, 0x9f, 0xaf, 0x00, 0x0a,
-    0xc8, 0x09, 0xde, 0x00, 0x00, 0x0e, 0x0f, 0x00,
-    0x41, 0x90, 0x9f, 0xde, 0x06, 0x00, 0x44, 0xaf,
-    0x27, 0x00, 0xb2, 0x06, 0x27, 0x00, 0xb4, 0x06,
-    0x27, 0x00, 0xb6, 0x06, 0xc0, 0x07, 0x74, 0x00,
-    0x44, 0xaf, 0x27, 0x00, 0xd6, 0x06, 0x08, 0x00,
-    0x00, 0x90, 0xc1, 0x07, 0x3a, 0x00, 0x20, 0x00,
-    0x01, 0xda, 0x7d, 0xc1, 0x9f, 0xaf, 0xba, 0x09,
-    0xc0, 0x07, 0x44, 0x00, 0x48, 0xaf, 0x27, 0x00,
-    0x7a, 0x06, 0x9f, 0xaf, 0x96, 0x0a, 0xe7, 0x07,
-    0x01, 0x00, 0xc0, 0x06, 0xe7, 0x05, 0x0e, 0xc0,
-    0x97, 0xcf, 0x49, 0xaf, 0xe7, 0x87, 0x43, 0x00,
-    0x0e, 0xc0, 0xe7, 0x07, 0xff, 0xff, 0xbe, 0x06,
-    0x9f, 0xaf, 0xae, 0x0a, 0xc0, 0x07, 0x01, 0x00,
-    0x60, 0xaf, 0x4a, 0xaf, 0x97, 0xcf, 0x00, 0x08,
-    0x09, 0x08, 0x11, 0x08, 0x00, 0xda, 0x7c, 0xc1,
-    0x97, 0xcf, 0x67, 0x04, 0xcc, 0x02, 0xc0, 0xdf,
-    0x51, 0x94, 0xb1, 0xaf, 0x06, 0x00, 0xc1, 0xdf,
-    0xc9, 0x09, 0xcc, 0x02, 0x49, 0x62, 0x75, 0xc1,
-    0xc0, 0xdf, 0xa7, 0xcf, 0xd6, 0x02, 0x0e, 0x00,
-    0x24, 0x00, 0x80, 0x04, 0x22, 0x00, 0x4e, 0x05,
-    0xd0, 0x00, 0x0e, 0x0a, 0xaa, 0x00, 0x30, 0x08,
-    0xbe, 0x00, 0x4a, 0x0a, 0x10, 0x00, 0x20, 0x00,
-    0x04, 0x00, 0x6e, 0x04, 0x02, 0x00, 0x6a, 0x04,
-    0x06, 0x00, 0x00, 0x00, 0x24, 0xc0, 0x04, 0x04,
-    0x28, 0xc0, 0xfe, 0xfb, 0x1e, 0xc0, 0x00, 0x04,
-    0x22, 0xc0, 0xff, 0xf4, 0xc0, 0x00, 0x90, 0x09,
-    0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x56, 0x08,
-    0x60, 0x08, 0xd0, 0x08, 0xda, 0x08, 0x00, 0x09,
-    0x04, 0x09, 0x08, 0x09, 0x32, 0x09, 0x42, 0x09,
-    0x50, 0x09, 0x52, 0x09, 0x5a, 0x09, 0x5a, 0x09,
-    0x27, 0x02, 0xca, 0x06, 0x97, 0xcf, 0xe7, 0x07,
-    0x00, 0x00, 0xca, 0x06, 0x0a, 0x0e, 0x01, 0x00,
-    0xca, 0x57, 0x0e, 0x00, 0x9f, 0xc3, 0x5a, 0x09,
-    0xca, 0x37, 0x00, 0x00, 0x9f, 0xc2, 0x5a, 0x09,
-    0x0a, 0xd2, 0xb2, 0xcf, 0x16, 0x08, 0xc8, 0x09,
-    0xde, 0x00, 0x07, 0x06, 0x9f, 0xcf, 0x6c, 0x09,
-    0x17, 0x02, 0xc8, 0x09, 0xde, 0x00, 0x00, 0x0e,
-    0x0f, 0x00, 0x41, 0x90, 0x9f, 0xde, 0x06, 0x00,
-    0xc8, 0x05, 0x30, 0x50, 0x06, 0x00, 0x9f, 0xc8,
-    0x5a, 0x09, 0x27, 0x0c, 0x02, 0x00, 0xb0, 0x06,
-    0xc0, 0x09, 0xb2, 0x06, 0x27, 0x00, 0xb4, 0x06,
-    0xe7, 0x07, 0x00, 0x00, 0xae, 0x06, 0x27, 0x00,
-    0x80, 0x06, 0x00, 0x1c, 0x06, 0x00, 0x27, 0x00,
-    0xb6, 0x06, 0x41, 0x90, 0x67, 0x50, 0xb0, 0x06,
-    0x0d, 0xc0, 0x67, 0x00, 0x7e, 0x06, 0x27, 0x0c,
-    0x06, 0x00, 0x82, 0x06, 0xe7, 0x07, 0xbc, 0x08,
-    0x84, 0x06, 0xc8, 0x07, 0x7e, 0x06, 0x41, 0x90,
-    0x51, 0xaf, 0x97, 0xcf, 0x9f, 0xaf, 0x48, 0x0c,
-    0xe7, 0x09, 0xb6, 0x06, 0xb4, 0x06, 0xe7, 0x09,
-    0xb0, 0x06, 0xae, 0x06, 0x59, 0xaf, 0x97, 0xcf,
-    0x27, 0x0c, 0x02, 0x00, 0xac, 0x06, 0x59, 0xaf,
-    0x97, 0xcf, 0x09, 0x0c, 0x02, 0x00, 0x09, 0xda,
-    0x49, 0xd2, 0xc9, 0x19, 0xd6, 0x06, 0xc8, 0x07,
-    0x7e, 0x06, 0xe0, 0x07, 0x00, 0x00, 0x60, 0x02,
-    0xe0, 0x07, 0x04, 0x00, 0xd0, 0x07, 0xcc, 0x08,
-    0x48, 0xdb, 0x41, 0x90, 0x50, 0xaf, 0x97, 0xcf,
-    0x59, 0xaf, 0x97, 0xcf, 0x59, 0xaf, 0x97, 0xcf,
-    0xf0, 0x57, 0x06, 0x00, 0x06, 0x00, 0x25, 0xc1,
-    0xe7, 0x07, 0x70, 0x06, 0x80, 0x06, 0x41, 0x90,
-    0x67, 0x00, 0x7e, 0x06, 0x27, 0x0c, 0x06, 0x00,
-    0x82, 0x06, 0xe7, 0x07, 0x8c, 0x09, 0x84, 0x06,
-    0xc8, 0x07, 0x7e, 0x06, 0x41, 0x90, 0x51, 0xaf,
-    0x97, 0xcf, 0x07, 0x0c, 0x06, 0x00, 0xc7, 0x57,
-    0x06, 0x00, 0x0f, 0xc1, 0xc8, 0x07, 0x70, 0x06,
-    0x15, 0xcf, 0x00, 0x0c, 0x02, 0x00, 0x00, 0xda,
-    0x40, 0xd1, 0x27, 0x00, 0xc2, 0x06, 0x1e, 0xcf,
-    0x1d, 0xcf, 0x27, 0x0c, 0x02, 0x00, 0xcc, 0x06,
-    0x19, 0xcf, 0x27, 0x02, 0x20, 0x01, 0xe7, 0x07,
-    0x08, 0x00, 0x22, 0x01, 0xe7, 0x07, 0x13, 0x00,
-    0xb0, 0xc0, 0x97, 0xcf, 0x41, 0x90, 0x67, 0x00,
-    0x7e, 0x06, 0xe7, 0x01, 0x82, 0x06, 0x27, 0x02,
-    0x80, 0x06, 0xe7, 0x07, 0x8c, 0x09, 0x84, 0x06,
-    0xc8, 0x07, 0x7e, 0x06, 0xc1, 0x07, 0x00, 0x80,
-    0x50, 0xaf, 0x97, 0xcf, 0x59, 0xaf, 0x97, 0xcf,
-    0x00, 0x60, 0x05, 0xc0, 0xe7, 0x07, 0x00, 0x00,
-    0xc4, 0x06, 0xa7, 0xcf, 0x7c, 0x06, 0x9f, 0xaf,
-    0x00, 0x0a, 0xe7, 0x07, 0x01, 0x00, 0xc4, 0x06,
-    0x49, 0xaf, 0xd7, 0x09, 0x00, 0xc0, 0x07, 0xaf,
-    0xe7, 0x05, 0x00, 0xc0, 0x4a, 0xaf, 0xa7, 0xcf,
-    0x7c, 0x06, 0xc0, 0x07, 0xfe, 0x7f, 0x44, 0xaf,
-    0x40, 0x00, 0xc0, 0x37, 0x00, 0x01, 0x41, 0x90,
-    0xc0, 0x37, 0x08, 0x00, 0xdf, 0xde, 0x50, 0x06,
-    0xc0, 0x57, 0x10, 0x00, 0x02, 0xc2, 0xc0, 0x07,
-    0x10, 0x00, 0x27, 0x00, 0x9a, 0x06, 0x41, 0x90,
-    0x9f, 0xde, 0x40, 0x06, 0x44, 0xaf, 0x27, 0x00,
-    0x9c, 0x06, 0xc0, 0x09, 0x9a, 0x06, 0x41, 0x90,
-    0x00, 0xd2, 0x00, 0xd8, 0x9f, 0xde, 0x08, 0x00,
-    0x44, 0xaf, 0x27, 0x00, 0xc8, 0x06, 0x97, 0xcf,
-    0xe7, 0x87, 0x00, 0x84, 0x28, 0xc0, 0xe7, 0x67,
-    0xff, 0xfb, 0x24, 0xc0, 0x97, 0xcf, 0xe7, 0x87,
-    0x01, 0x00, 0xd2, 0x06, 0xe7, 0x57, 0x00, 0x00,
-    0xa8, 0x06, 0x97, 0xc1, 0x9f, 0xaf, 0x00, 0x0a,
-    0xe7, 0x87, 0x00, 0x06, 0x22, 0xc0, 0xe7, 0x07,
-    0x00, 0x00, 0x90, 0xc0, 0xe7, 0x67, 0xfe, 0xff,
-    0x3e, 0xc0, 0xe7, 0x07, 0x26, 0x00, 0x0a, 0xc0,
-    0xe7, 0x87, 0x01, 0x00, 0x3e, 0xc0, 0xe7, 0x07,
-    0xff, 0xff, 0xbe, 0x06, 0x9f, 0xaf, 0x10, 0x0b,
-    0x97, 0xcf, 0x17, 0x00, 0xa7, 0xaf, 0x78, 0x06,
-    0xc0, 0x05, 0x27, 0x00, 0x76, 0x06, 0xe7, 0x87,
-    0x01, 0x00, 0xd2, 0x06, 0x9f, 0xaf, 0x00, 0x0a,
-    0xe7, 0x07, 0x0c, 0x00, 0x40, 0xc0, 0x9f, 0xaf,
-    0x10, 0x0b, 0x00, 0x90, 0x27, 0x00, 0xa6, 0x06,
-    0x27, 0x00, 0xaa, 0x06, 0xe7, 0x09, 0xb2, 0x06,
-    0xb4, 0x06, 0x27, 0x00, 0xae, 0x06, 0x27, 0x00,
-    0xac, 0x06, 0x9f, 0xaf, 0xae, 0x0a, 0xc0, 0x07,
-    0x00, 0x00, 0x27, 0x00, 0xb2, 0x02, 0x27, 0x00,
-    0xb4, 0x02, 0x27, 0x00, 0x8e, 0x06, 0xc0, 0x07,
-    0x06, 0x00, 0xc8, 0x09, 0xde, 0x00, 0xc8, 0x17,
-    0x03, 0x00, 0xc9, 0x07, 0x70, 0x06, 0x29, 0x0a,
-    0x00, 0xda, 0x7d, 0xc1, 0x97, 0xcf, 0xd7, 0x09,
-    0x00, 0xc0, 0xc1, 0xdf, 0x00, 0x90, 0x27, 0x00,
-    0x96, 0x06, 0xe7, 0x07, 0x96, 0x06, 0x98, 0x06,
-    0x27, 0x00, 0xa0, 0x06, 0xe7, 0x07, 0xa0, 0x06,
-    0xa2, 0x06, 0x27, 0x00, 0xa6, 0x06, 0x27, 0x00,
-    0x90, 0x06, 0x27, 0x00, 0x9e, 0x06, 0xc8, 0x09,
-    0x9c, 0x06, 0xc1, 0x09, 0x9a, 0x06, 0xc9, 0x07,
-    0xa4, 0x06, 0x11, 0x02, 0x09, 0x02, 0xc8, 0x17,
-    0x40, 0x06, 0x01, 0xda, 0x7a, 0xc1, 0x51, 0x94,
-    0xc8, 0x09, 0xc8, 0x06, 0xc9, 0x07, 0xc6, 0x06,
-    0xc1, 0x09, 0x9a, 0x06, 0x11, 0x02, 0x09, 0x02,
-    0xc8, 0x17, 0x08, 0x00, 0x01, 0xda, 0x7a, 0xc1,
-    0x51, 0x94, 0xe7, 0x05, 0x00, 0xc0, 0x97, 0xcf,
-    0xe7, 0x57, 0x00, 0x00, 0x76, 0x06, 0x97, 0xc0,
-    0x9f, 0xaf, 0x04, 0x00, 0xe7, 0x09, 0xbe, 0x06,
-    0xba, 0x06, 0xe7, 0x57, 0xff, 0xff, 0xba, 0x06,
-    0x04, 0xc1, 0xe7, 0x07, 0x10, 0x0b, 0xb8, 0x06,
-    0x97, 0xcf, 0xe7, 0x17, 0x32, 0x00, 0xba, 0x06,
-    0xe7, 0x67, 0xff, 0x07, 0xba, 0x06, 0xe7, 0x07,
-    0x46, 0x0b, 0xb8, 0x06, 0x97, 0xcf, 0xe7, 0x57,
-    0x00, 0x00, 0xc0, 0x06, 0x23, 0xc0, 0xe7, 0x07,
-    0x04, 0x00, 0x90, 0xc0, 0xe7, 0x07, 0x00, 0x80,
-    0x80, 0xc0, 0xe7, 0x07, 0x00, 0x00, 0x80, 0xc0,
-    0xe7, 0x07, 0x00, 0x80, 0x80, 0xc0, 0xc0, 0x07,
-    0x00, 0x00, 0xc0, 0x07, 0x00, 0x00, 0xc0, 0x07,
-    0x00, 0x00, 0xe7, 0x07, 0x00, 0x00, 0x80, 0xc0,
-    0xe7, 0x07, 0x00, 0x80, 0x80, 0xc0, 0xe7, 0x07,
-    0x00, 0x80, 0x40, 0xc0, 0xc0, 0x07, 0x00, 0x00,
-    0xe7, 0x07, 0x00, 0x00, 0x40, 0xc0, 0xe7, 0x07,
-    0x00, 0x00, 0x80, 0xc0, 0xe7, 0x07, 0x04, 0x00,
-    0x90, 0xc0, 0xe7, 0x07, 0x00, 0x02, 0x40, 0xc0,
-    0xe7, 0x07, 0x0c, 0x02, 0x40, 0xc0, 0xe7, 0x07,
-    0x00, 0x00, 0xc0, 0x06, 0xe7, 0x07, 0x00, 0x00,
-    0xb8, 0x06, 0xe7, 0x07, 0x00, 0x00, 0xd2, 0x06,
-    0xd7, 0x09, 0x00, 0xc0, 0xc1, 0xdf, 0x9f, 0xaf,
-    0x34, 0x02, 0xe7, 0x05, 0x00, 0xc0, 0x9f, 0xaf,
-    0xc4, 0x01, 0x97, 0xcf, 0xd7, 0x09, 0x00, 0xc0,
-    0x17, 0x00, 0x17, 0x02, 0x97, 0x02, 0xe7, 0x57,
-    0x00, 0x00, 0xa8, 0x06, 0x06, 0xc0, 0xc0, 0x09,
-    0x92, 0xc0, 0xc0, 0x77, 0x09, 0x02, 0x9f, 0xc1,
-    0x5c, 0x05, 0x9f, 0xcf, 0x32, 0x06, 0xd7, 0x09,
-    0x0e, 0xc0, 0xe7, 0x07, 0x00, 0x00, 0x0e, 0xc0,
-    0x9f, 0xaf, 0x02, 0x0c, 0xe7, 0x05, 0x0e, 0xc0,
-    0x97, 0xcf, 0xd7, 0x09, 0x00, 0xc0, 0x17, 0x02,
-    0xc8, 0x09, 0xb0, 0xc0, 0xe7, 0x67, 0xfe, 0x7f,
-    0xb0, 0xc0, 0xc8, 0x77, 0x00, 0x20, 0x9f, 0xc1,
-    0x64, 0xeb, 0xe7, 0x57, 0x00, 0x00, 0xc8, 0x02,
-    0x9f, 0xc1, 0x80, 0xeb, 0xc8, 0x99, 0xca, 0x02,
-    0xc8, 0x67, 0x04, 0x00, 0x9f, 0xc1, 0x96, 0xeb,
-    0x9f, 0xcf, 0x4c, 0xeb, 0xe7, 0x07, 0x00, 0x00,
-    0xa6, 0xc0, 0xe7, 0x09, 0xb0, 0xc0, 0xc8, 0x02,
-    0xe7, 0x07, 0x03, 0x00, 0xb0, 0xc0, 0x97, 0xcf,
-    0xc0, 0x09, 0xb0, 0x06, 0xc0, 0x37, 0x01, 0x00,
-    0x97, 0xc9, 0xc9, 0x09, 0xb2, 0x06, 0x02, 0x00,
-    0x41, 0x90, 0x48, 0x02, 0xc9, 0x17, 0x06, 0x00,
-    0x9f, 0xaf, 0x08, 0x04, 0x9f, 0xa2, 0x72, 0x0c,
-    0x02, 0xda, 0x77, 0xc1, 0x41, 0x60, 0x71, 0xc1,
-    0x97, 0xcf, 0x17, 0x02, 0x57, 0x02, 0x43, 0x04,
-    0x21, 0x04, 0xe0, 0x00, 0x43, 0x04, 0x21, 0x04,
-    0xe0, 0x00, 0x43, 0x04, 0x21, 0x04, 0xe0, 0x00,
-    0xc1, 0x07, 0x01, 0x00, 0xc9, 0x05, 0xc8, 0x05,
-    0x97, 0xcf, 0xe7, 0x07, 0x01, 0x00, 0x8e, 0x06,
-    0xc8, 0x07, 0x86, 0x06, 0xe7, 0x07, 0x00, 0x00,
-    0x86, 0x06, 0xe7, 0x07, 0x10, 0x08, 0x88, 0x06,
-    0xe7, 0x07, 0x04, 0x00, 0x8a, 0x06, 0xe7, 0x07,
-    0xbc, 0x0c, 0x8c, 0x06, 0xc1, 0x07, 0x03, 0x80,
-    0x50, 0xaf, 0x97, 0xcf, 0xe7, 0x07, 0x00, 0x00,
-    0x8e, 0x06, 0x97, 0xcf,
-    0x00, 0x00
-};
-
-/****************************************************************
- *     kaweth_new_code_fix
- ****************************************************************/
-static __u8 kaweth_new_code_fix[] = 
-{
-    0xB6, 0xC3, 0xAA, 0xBB, 0xCC, 0xDD,
-    0x02, 0x00, 0x08, 0x00, 0x28, 0x00, 0x2c, 0x00,
-    0x34, 0x00, 0x3c, 0x00, 0x40, 0x00, 0x48, 0x00,
-    0x54, 0x00, 0x58, 0x00, 0x5e, 0x00, 0x64, 0x00,
-    0x68, 0x00, 0x6e, 0x00, 0x6c, 0x00, 0x72, 0x00,
-    0x76, 0x00, 0x7c, 0x00, 0x80, 0x00, 0x86, 0x00,
-    0x8a, 0x00, 0x90, 0x00, 0x94, 0x00, 0x98, 0x00,
-    0x9e, 0x00, 0xa6, 0x00, 0xaa, 0x00, 0xb0, 0x00,
-    0xb4, 0x00, 0xb8, 0x00, 0xc0, 0x00, 0xc6, 0x00,
-    0xca, 0x00, 0xd0, 0x00, 0xd4, 0x00, 0xd8, 0x00,
-    0xe0, 0x00, 0xde, 0x00, 0xe8, 0x00, 0xf0, 0x00,
-    0xfc, 0x00, 0x04, 0x01, 0x0a, 0x01, 0x18, 0x01,
-    0x22, 0x01, 0x28, 0x01, 0x3a, 0x01, 0x3e, 0x01,
-    0x7e, 0x01, 0x98, 0x01, 0x9c, 0x01, 0xa2, 0x01,
-    0xac, 0x01, 0xb2, 0x01, 0xba, 0x01, 0xc0, 0x01,
-    0xc8, 0x01, 0xd0, 0x01, 0xd6, 0x01, 0xf4, 0x01,
-    0xfc, 0x01, 0x08, 0x02, 0x16, 0x02, 0x1a, 0x02,
-    0x22, 0x02, 0x2a, 0x02, 0x2e, 0x02, 0x3e, 0x02,
-    0x44, 0x02, 0x4a, 0x02, 0x50, 0x02, 0x64, 0x02,
-    0x62, 0x02, 0x6c, 0x02, 0x72, 0x02, 0x86, 0x02,
-    0x8c, 0x02, 0x90, 0x02, 0x9e, 0x02, 0xbc, 0x02,
-    0xd0, 0x02, 0xd8, 0x02, 0xdc, 0x02, 0xe0, 0x02,
-    0xe8, 0x02, 0xe6, 0x02, 0xf4, 0x02, 0xfe, 0x02,
-    0x04, 0x03, 0x0c, 0x03, 0x28, 0x03, 0x7c, 0x03,
-    0x90, 0x03, 0x94, 0x03, 0x9c, 0x03, 0xa2, 0x03,
-    0xc0, 0x03, 0xd0, 0x03, 0xd4, 0x03, 0xee, 0x03,
-    0xfa, 0x03, 0xfe, 0x03, 0x2e, 0x04, 0x32, 0x04,
-    0x3c, 0x04, 0x40, 0x04, 0x4e, 0x04, 0x76, 0x04,
-    0x7c, 0x04, 0x84, 0x04, 0x8a, 0x04, 0x8e, 0x04,
-    0xa6, 0x04, 0xb0, 0x04, 0xb8, 0x04, 0xbe, 0x04,
-    0xd2, 0x04, 0xdc, 0x04, 0xee, 0x04, 0x10, 0x05,
-    0x1a, 0x05, 0x24, 0x05, 0x2a, 0x05, 0x36, 0x05,
-    0x34, 0x05, 0x3c, 0x05, 0x42, 0x05, 0x64, 0x05,
-    0x6a, 0x05, 0x6e, 0x05, 0x86, 0x05, 0x22, 0x06,
-    0x26, 0x06, 0x2c, 0x06, 0x30, 0x06, 0x42, 0x06,
-    0x4a, 0x06, 0x4e, 0x06, 0x56, 0x06, 0x54, 0x06,
-    0x5a, 0x06, 0x60, 0x06, 0x66, 0x06, 0xe8, 0x06,
-    0xee, 0x06, 0xf4, 0x06, 0x16, 0x07, 0x26, 0x07,
-    0x2c, 0x07, 0x32, 0x07, 0x36, 0x07, 0x3a, 0x07,
-    0x3e, 0x07, 0x52, 0x07, 0x56, 0x07, 0x5a, 0x07,
-    0x64, 0x07, 0x76, 0x07, 0x7a, 0x07, 0x80, 0x07,
-    0x84, 0x07, 0x8a, 0x07, 0x9e, 0x07, 0xa2, 0x07,
-    0xda, 0x07, 0xde, 0x07, 0xe2, 0x07, 0xe6, 0x07,
-    0xea, 0x07, 0xee, 0x07, 0xf2, 0x07, 0xf6, 0x07,
-    0x0e, 0x08, 0x16, 0x08, 0x18, 0x08, 0x1a, 0x08,
-    0x1c, 0x08, 0x1e, 0x08, 0x20, 0x08, 0x22, 0x08,
-    0x24, 0x08, 0x26, 0x08, 0x28, 0x08, 0x2a, 0x08,
-    0x2c, 0x08, 0x2e, 0x08, 0x32, 0x08, 0x3a, 0x08,
-    0x46, 0x08, 0x4e, 0x08, 0x54, 0x08, 0x5e, 0x08,
-    0x78, 0x08, 0x7e, 0x08, 0x82, 0x08, 0x86, 0x08,
-    0x8c, 0x08, 0x90, 0x08, 0x98, 0x08, 0x9e, 0x08,
-    0xa4, 0x08, 0xaa, 0x08, 0xb0, 0x08, 0xae, 0x08,
-    0xb4, 0x08, 0xbe, 0x08, 0xc4, 0x08, 0xc2, 0x08,
-    0xca, 0x08, 0xc8, 0x08, 0xd4, 0x08, 0xe4, 0x08,
-    0xe8, 0x08, 0xf6, 0x08, 0x14, 0x09, 0x12, 0x09,
-    0x1a, 0x09, 0x20, 0x09, 0x26, 0x09, 0x24, 0x09,
-    0x2a, 0x09, 0x3e, 0x09, 0x4c, 0x09, 0x56, 0x09,
-    0x70, 0x09, 0x74, 0x09, 0x78, 0x09, 0x7e, 0x09,
-    0x7c, 0x09, 0x82, 0x09, 0x98, 0x09, 0x9c, 0x09,
-    0xa0, 0x09, 0xa6, 0x09, 0xb8, 0x09, 0xdc, 0x09,
-    0xe8, 0x09, 0xec, 0x09, 0xfc, 0x09, 0x12, 0x0a,
-    0x18, 0x0a, 0x1e, 0x0a, 0x42, 0x0a, 0x46, 0x0a,
-    0x4e, 0x0a, 0x54, 0x0a, 0x5a, 0x0a, 0x5e, 0x0a,
-    0x68, 0x0a, 0x6e, 0x0a, 0x72, 0x0a, 0x78, 0x0a,
-    0x76, 0x0a, 0x7c, 0x0a, 0x80, 0x0a, 0x84, 0x0a,
-    0x94, 0x0a, 0xa4, 0x0a, 0xb8, 0x0a, 0xbe, 0x0a,
-    0xbc, 0x0a, 0xc2, 0x0a, 0xc8, 0x0a, 0xc6, 0x0a,
-    0xcc, 0x0a, 0xd0, 0x0a, 0xd4, 0x0a, 0xd8, 0x0a,
-    0xdc, 0x0a, 0xe0, 0x0a, 0xf2, 0x0a, 0xf6, 0x0a,
-    0xfa, 0x0a, 0x14, 0x0b, 0x1a, 0x0b, 0x20, 0x0b,
-    0x1e, 0x0b, 0x26, 0x0b, 0x2e, 0x0b, 0x2c, 0x0b,
-    0x36, 0x0b, 0x3c, 0x0b, 0x42, 0x0b, 0x40, 0x0b,
-    0x4a, 0x0b, 0xaa, 0x0b, 0xb0, 0x0b, 0xb6, 0x0b,
-    0xc0, 0x0b, 0xc8, 0x0b, 0xda, 0x0b, 0xe8, 0x0b,
-    0xec, 0x0b, 0xfa, 0x0b, 0x4a, 0x0c, 0x54, 0x0c,
-    0x62, 0x0c, 0x66, 0x0c, 0x96, 0x0c, 0x9a, 0x0c,
-    0xa0, 0x0c, 0xa6, 0x0c, 0xa4, 0x0c, 0xac, 0x0c,
-    0xb2, 0x0c, 0xb0, 0x0c, 0xc0, 0x0c,
-    0x00, 0x00
-};
-
-
-static const int len_kaweth_trigger_code = sizeof(kaweth_trigger_code);
-static const int len_kaweth_trigger_code_fix = sizeof(kaweth_trigger_code_fix);
-static const int len_kaweth_new_code = sizeof(kaweth_new_code);
-static const int len_kaweth_new_code_fix = sizeof(kaweth_new_code_fix);
diff --git a/drivers/usb/net/mcs7830.c b/drivers/usb/net/mcs7830.c
deleted file mode 100644
index 6240b978fe3..00000000000
--- a/drivers/usb/net/mcs7830.c
+++ /dev/null
@@ -1,534 +0,0 @@
-/*
- * MosChips MCS7830 based USB 2.0 Ethernet Devices
- *
- * based on usbnet.c, asix.c and the vendor provided mcs7830 driver
- *
- * Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>
- * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
- * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
- * Copyright (c) 2002-2003 TiVo Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/crc32.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/init.h>
-#include <linux/mii.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/usb.h>
-
-#include "usbnet.h"
-
-/* requests */
-#define MCS7830_RD_BMREQ	(USB_DIR_IN  | USB_TYPE_VENDOR | \
-				 USB_RECIP_DEVICE)
-#define MCS7830_WR_BMREQ	(USB_DIR_OUT | USB_TYPE_VENDOR | \
-				 USB_RECIP_DEVICE)
-#define MCS7830_RD_BREQ		0x0E
-#define MCS7830_WR_BREQ		0x0D
-
-#define MCS7830_CTRL_TIMEOUT	1000
-#define MCS7830_MAX_MCAST	64
-
-#define MCS7830_VENDOR_ID	0x9710
-#define MCS7830_PRODUCT_ID	0x7830
-
-#define MCS7830_MII_ADVERTISE	(ADVERTISE_PAUSE_CAP | ADVERTISE_100FULL | \
-				 ADVERTISE_100HALF | ADVERTISE_10FULL | \
-				 ADVERTISE_10HALF | ADVERTISE_CSMA)
-
-/* HIF_REG_XX coressponding index value */
-enum {
-	HIF_REG_MULTICAST_HASH			= 0x00,
-	HIF_REG_PACKET_GAP1			= 0x08,
-	HIF_REG_PACKET_GAP2			= 0x09,
-	HIF_REG_PHY_DATA			= 0x0a,
-	HIF_REG_PHY_CMD1			= 0x0c,
-	   HIF_REG_PHY_CMD1_READ		= 0x40,
-	   HIF_REG_PHY_CMD1_WRITE		= 0x20,
-	   HIF_REG_PHY_CMD1_PHYADDR		= 0x01,
-	HIF_REG_PHY_CMD2			= 0x0d,
-	   HIF_REG_PHY_CMD2_PEND_FLAG_BIT	= 0x80,
-	   HIF_REG_PHY_CMD2_READY_FLAG_BIT	= 0x40,
-	HIF_REG_CONFIG				= 0x0e,
-	   HIF_REG_CONFIG_CFG			= 0x80,
-	   HIF_REG_CONFIG_SPEED100		= 0x40,
-	   HIF_REG_CONFIG_FULLDUPLEX_ENABLE	= 0x20,
-	   HIF_REG_CONFIG_RXENABLE		= 0x10,
-	   HIF_REG_CONFIG_TXENABLE		= 0x08,
-	   HIF_REG_CONFIG_SLEEPMODE		= 0x04,
-	   HIF_REG_CONFIG_ALLMULTICAST		= 0x02,
-	   HIF_REG_CONFIG_PROMISCIOUS		= 0x01,
-	HIF_REG_ETHERNET_ADDR			= 0x0f,
-	HIF_REG_22				= 0x15,
-	HIF_REG_PAUSE_THRESHOLD			= 0x16,
-	   HIF_REG_PAUSE_THRESHOLD_DEFAULT	= 0,
-};
-
-struct mcs7830_data {
-	u8 multi_filter[8];
-	u8 config;
-};
-
-static const char driver_name[] = "MOSCHIP usb-ethernet driver";
-
-static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data)
-{
-	struct usb_device *xdev = dev->udev;
-	int ret;
-
-	ret = usb_control_msg(xdev, usb_rcvctrlpipe(xdev, 0), MCS7830_RD_BREQ,
-			      MCS7830_RD_BMREQ, 0x0000, index, data,
-			      size, msecs_to_jiffies(MCS7830_CTRL_TIMEOUT));
-	return ret;
-}
-
-static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, void *data)
-{
-	struct usb_device *xdev = dev->udev;
-	int ret;
-
-	ret = usb_control_msg(xdev, usb_sndctrlpipe(xdev, 0), MCS7830_WR_BREQ,
-			      MCS7830_WR_BMREQ, 0x0000, index, data,
-			      size, msecs_to_jiffies(MCS7830_CTRL_TIMEOUT));
-	return ret;
-}
-
-static void mcs7830_async_cmd_callback(struct urb *urb)
-{
-	struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
-
-	if (urb->status < 0)
-		printk(KERN_DEBUG "mcs7830_async_cmd_callback() failed with %d",
-			urb->status);
-
-	kfree(req);
-	usb_free_urb(urb);
-}
-
-static void mcs7830_set_reg_async(struct usbnet *dev, u16 index, u16 size, void *data)
-{
-	struct usb_ctrlrequest *req;
-	int ret;
-	struct urb *urb;
-
-	urb = usb_alloc_urb(0, GFP_ATOMIC);
-	if (!urb) {
-		dev_dbg(&dev->udev->dev, "Error allocating URB "
-				"in write_cmd_async!");
-		return;
-	}
-
-	req = kmalloc(sizeof *req, GFP_ATOMIC);
-	if (!req) {
-		dev_err(&dev->udev->dev, "Failed to allocate memory for "
-				"control request");
-		goto out;
-	}
-	req->bRequestType = MCS7830_WR_BMREQ;
-	req->bRequest = MCS7830_WR_BREQ;
-	req->wValue = 0;
-	req->wIndex = cpu_to_le16(index);
-	req->wLength = cpu_to_le16(size);
-
-	usb_fill_control_urb(urb, dev->udev,
-			     usb_sndctrlpipe(dev->udev, 0),
-			     (void *)req, data, size,
-			     mcs7830_async_cmd_callback, req);
-
-	ret = usb_submit_urb(urb, GFP_ATOMIC);
-	if (ret < 0) {
-		dev_err(&dev->udev->dev, "Error submitting the control "
-				"message: ret=%d", ret);
-		goto out;
-	}
-	return;
-out:
-	kfree(req);
-	usb_free_urb(urb);
-}
-
-static int mcs7830_get_address(struct usbnet *dev)
-{
-	int ret;
-	ret = mcs7830_get_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN,
-				   dev->net->dev_addr);
-	if (ret < 0)
-		return ret;
-	return 0;
-}
-
-static int mcs7830_read_phy(struct usbnet *dev, u8 index)
-{
-	int ret;
-	int i;
-	__le16 val;
-
-	u8 cmd[2] = {
-		HIF_REG_PHY_CMD1_READ | HIF_REG_PHY_CMD1_PHYADDR,
-		HIF_REG_PHY_CMD2_PEND_FLAG_BIT | index,
-	};
-
-	mutex_lock(&dev->phy_mutex);
-	/* write the MII command */
-	ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
-	if (ret < 0)
-		goto out;
-
-	/* wait for the data to become valid, should be within < 1ms */
-	for (i = 0; i < 10; i++) {
-		ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
-		if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT))
-			break;
-		ret = -EIO;
-		msleep(1);
-	}
-	if (ret < 0)
-		goto out;
-
-	/* read actual register contents */
-	ret = mcs7830_get_reg(dev, HIF_REG_PHY_DATA, 2, &val);
-	if (ret < 0)
-		goto out;
-	ret = le16_to_cpu(val);
-	dev_dbg(&dev->udev->dev, "read PHY reg %02x: %04x (%d tries)\n",
-		index, val, i);
-out:
-	mutex_unlock(&dev->phy_mutex);
-	return ret;
-}
-
-static int mcs7830_write_phy(struct usbnet *dev, u8 index, u16 val)
-{
-	int ret;
-	int i;
-	__le16 le_val;
-
-	u8 cmd[2] = {
-		HIF_REG_PHY_CMD1_WRITE | HIF_REG_PHY_CMD1_PHYADDR,
-		HIF_REG_PHY_CMD2_PEND_FLAG_BIT | (index & 0x1F),
-	};
-
-	mutex_lock(&dev->phy_mutex);
-
-	/* write the new register contents */
-	le_val = cpu_to_le16(val);
-	ret = mcs7830_set_reg(dev, HIF_REG_PHY_DATA, 2, &le_val);
-	if (ret < 0)
-		goto out;
-
-	/* write the MII command */
-	ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
-	if (ret < 0)
-		goto out;
-
-	/* wait for the command to be accepted by the PHY */
-	for (i = 0; i < 10; i++) {
-		ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
-		if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT))
-			break;
-		ret = -EIO;
-		msleep(1);
-	}
-	if (ret < 0)
-		goto out;
-
-	ret = 0;
-	dev_dbg(&dev->udev->dev, "write PHY reg %02x: %04x (%d tries)\n",
-		index, val, i);
-out:
-	mutex_unlock(&dev->phy_mutex);
-	return ret;
-}
-
-/*
- * This algorithm comes from the original mcs7830 version 1.4 driver,
- * not sure if it is needed.
- */
-static int mcs7830_set_autoneg(struct usbnet *dev, int ptrUserPhyMode)
-{
-	int ret;
-	/* Enable all media types */
-	ret = mcs7830_write_phy(dev, MII_ADVERTISE, MCS7830_MII_ADVERTISE);
-
-	/* First reset BMCR */
-	if (!ret)
-		ret = mcs7830_write_phy(dev, MII_BMCR, 0x0000);
-	/* Enable Auto Neg */
-	if (!ret)
-		ret = mcs7830_write_phy(dev, MII_BMCR, BMCR_ANENABLE);
-	/* Restart Auto Neg (Keep the Enable Auto Neg Bit Set) */
-	if (!ret)
-		ret = mcs7830_write_phy(dev, MII_BMCR,
-				BMCR_ANENABLE | BMCR_ANRESTART	);
-	return ret < 0 ? : 0;
-}
-
-
-/*
- * if we can read register 22, the chip revision is C or higher
- */
-static int mcs7830_get_rev(struct usbnet *dev)
-{
-	u8 dummy[2];
-	int ret;
-	ret = mcs7830_get_reg(dev, HIF_REG_22, 2, dummy);
-	if (ret > 0)
-		return 2; /* Rev C or later */
-	return 1; /* earlier revision */
-}
-
-/*
- * On rev. C we need to set the pause threshold
- */
-static void mcs7830_rev_C_fixup(struct usbnet *dev)
-{
-	u8 pause_threshold = HIF_REG_PAUSE_THRESHOLD_DEFAULT;
-	int retry;
-
-	for (retry = 0; retry < 2; retry++) {
-		if (mcs7830_get_rev(dev) == 2) {
-			dev_info(&dev->udev->dev, "applying rev.C fixup\n");
-			mcs7830_set_reg(dev, HIF_REG_PAUSE_THRESHOLD,
-					1, &pause_threshold);
-		}
-		msleep(1);
-	}
-}
-
-static int mcs7830_init_dev(struct usbnet *dev)
-{
-	int ret;
-	int retry;
-
-	/* Read MAC address from EEPROM */
-	ret = -EINVAL;
-	for (retry = 0; retry < 5 && ret; retry++)
-		ret = mcs7830_get_address(dev);
-	if (ret) {
-		dev_warn(&dev->udev->dev, "Cannot read MAC address\n");
-		goto out;
-	}
-
-	/* Set up PHY */
-	ret = mcs7830_set_autoneg(dev, 0);
-	if (ret) {
-		dev_info(&dev->udev->dev, "Cannot set autoneg\n");
-		goto out;
-	}
-
-	mcs7830_rev_C_fixup(dev);
-	ret = 0;
-out:
-	return ret;
-}
-
-static int mcs7830_mdio_read(struct net_device *netdev, int phy_id,
-			     int location)
-{
-	struct usbnet *dev = netdev->priv;
-	return mcs7830_read_phy(dev, location);
-}
-
-static void mcs7830_mdio_write(struct net_device *netdev, int phy_id,
-				int location, int val)
-{
-	struct usbnet *dev = netdev->priv;
-	mcs7830_write_phy(dev, location, val);
-}
-
-static int mcs7830_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
-{
-	struct usbnet *dev = netdev_priv(net);
-	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
-}
-
-/* credits go to asix_set_multicast */
-static void mcs7830_set_multicast(struct net_device *net)
-{
-	struct usbnet *dev = netdev_priv(net);
-	struct mcs7830_data *data = (struct mcs7830_data *)&dev->data;
-
-	data->config = HIF_REG_CONFIG_TXENABLE;
-
-	/* this should not be needed, but it doesn't work otherwise */
-	data->config |= HIF_REG_CONFIG_ALLMULTICAST;
-
-	if (net->flags & IFF_PROMISC) {
-		data->config |= HIF_REG_CONFIG_PROMISCIOUS;
-	} else if (net->flags & IFF_ALLMULTI
-		   || net->mc_count > MCS7830_MAX_MCAST) {
-		data->config |= HIF_REG_CONFIG_ALLMULTICAST;
-	} else if (net->mc_count == 0) {
-		/* just broadcast and directed */
-	} else {
-		/* We use the 20 byte dev->data
-		 * for our 8 byte filter buffer
-		 * to avoid allocating memory that
-		 * is tricky to free later */
-		struct dev_mc_list *mc_list = net->mc_list;
-		u32 crc_bits;
-		int i;
-
-		memset(data->multi_filter, 0, sizeof data->multi_filter);
-
-		/* Build the multicast hash filter. */
-		for (i = 0; i < net->mc_count; i++) {
-			crc_bits = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26;
-			data->multi_filter[crc_bits >> 3] |= 1 << (crc_bits & 7);
-			mc_list = mc_list->next;
-		}
-
-		mcs7830_set_reg_async(dev, HIF_REG_MULTICAST_HASH,
-				sizeof data->multi_filter,
-				data->multi_filter);
-	}
-
-	mcs7830_set_reg_async(dev, HIF_REG_CONFIG, 1, &data->config);
-}
-
-static int mcs7830_get_regs_len(struct net_device *net)
-{
-	struct usbnet *dev = netdev_priv(net);
-
-	switch (mcs7830_get_rev(dev)) {
-	case 1:
-		return 21;
-	case 2:
-		return 32;
-	}
-	return 0;
-}
-
-static void mcs7830_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *drvinfo)
-{
-	usbnet_get_drvinfo(net, drvinfo);
-	drvinfo->regdump_len = mcs7830_get_regs_len(net);
-}
-
-static void mcs7830_get_regs(struct net_device *net, struct ethtool_regs *regs, void *data)
-{
-	struct usbnet *dev = netdev_priv(net);
-
-	regs->version = mcs7830_get_rev(dev);
-	mcs7830_get_reg(dev, 0, regs->len, data);
-}
-
-static struct ethtool_ops mcs7830_ethtool_ops = {
-	.get_drvinfo		= mcs7830_get_drvinfo,
-	.get_regs_len		= mcs7830_get_regs_len,
-	.get_regs		= mcs7830_get_regs,
-
-	/* common usbnet calls */
-	.get_link		= usbnet_get_link,
-	.get_msglevel		= usbnet_get_msglevel,
-	.set_msglevel		= usbnet_set_msglevel,
-	.get_settings		= usbnet_get_settings,
-	.set_settings		= usbnet_set_settings,
-	.nway_reset		= usbnet_nway_reset,
-};
-
-static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
-{
-	struct net_device *net = dev->net;
-	int ret;
-
-	ret = mcs7830_init_dev(dev);
-	if (ret)
-		goto out;
-
-	net->do_ioctl = mcs7830_ioctl;
-	net->ethtool_ops = &mcs7830_ethtool_ops;
-	net->set_multicast_list = mcs7830_set_multicast;
-	mcs7830_set_multicast(net);
-
-	/* reserve space for the status byte on rx */
-	dev->rx_urb_size = ETH_FRAME_LEN + 1;
-
-	dev->mii.mdio_read = mcs7830_mdio_read;
-	dev->mii.mdio_write = mcs7830_mdio_write;
-	dev->mii.dev = net;
-	dev->mii.phy_id_mask = 0x3f;
-	dev->mii.reg_num_mask = 0x1f;
-	dev->mii.phy_id = *((u8 *) net->dev_addr + 1);
-
-	ret = usbnet_get_endpoints(dev, udev);
-out:
-	return ret;
-}
-
-/* The chip always appends a status bytes that we need to strip */
-static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
-{
-	u8 status;
-
-	if (skb->len == 0) {
-		dev_err(&dev->udev->dev, "unexpected empty rx frame\n");
-		return 0;
-	}
-
-	skb_trim(skb, skb->len - 1);
-	status = skb->data[skb->len];
-
-	if (status != 0x20)
-		dev_dbg(&dev->udev->dev, "rx fixup status %x\n", status);
-
-	return skb->len > 0;
-}
-
-static const struct driver_info moschip_info = {
-	.description	= "MOSCHIP 7830 usb-NET adapter",
-	.bind		= mcs7830_bind,
-	.rx_fixup	= mcs7830_rx_fixup,
-	.flags		= FLAG_ETHER,
-	.in		= 1,
-	.out		= 2,
-};
-
-static const struct usb_device_id products[] = {
-	{
-		USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID),
-		.driver_info = (unsigned long) &moschip_info,
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(usb, products);
-
-static struct usb_driver mcs7830_driver = {
-	.name = driver_name,
-	.id_table = products,
-	.probe = usbnet_probe,
-	.disconnect = usbnet_disconnect,
-	.suspend = usbnet_suspend,
-	.resume = usbnet_resume,
-};
-
-static int __init mcs7830_init(void)
-{
-	return usb_register(&mcs7830_driver);
-}
-module_init(mcs7830_init);
-
-static void __exit mcs7830_exit(void)
-{
-	usb_deregister(&mcs7830_driver);
-}
-module_exit(mcs7830_exit);
-
-MODULE_DESCRIPTION("USB to network adapter MCS7830)");
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c
deleted file mode 100644
index 19bf8dae70c..00000000000
--- a/drivers/usb/net/net1080.c
+++ /dev/null
@@ -1,615 +0,0 @@
-/*
- * Net1080 based USB host-to-host cables
- * Copyright (C) 2000-2005 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-// #define	DEBUG			// error path messages, extra info
-// #define	VERBOSE			// more; success messages
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/workqueue.h>
-#include <linux/mii.h>
-#include <linux/usb.h>
-
-#include <asm/unaligned.h>
-
-#include "usbnet.h"
-
-
-/*
- * Netchip 1080 driver ... http://www.netchip.com
- * (Sept 2004:  End-of-life announcement has been sent.)
- * Used in (some) LapLink cables
- */
-
-#define frame_errors	data[1]
-
-/*
- * NetChip framing of ethernet packets, supporting additional error
- * checks for links that may drop bulk packets from inside messages.
- * Odd USB length == always short read for last usb packet.
- *	- nc_header
- *	- Ethernet header (14 bytes)
- *	- payload
- *	- (optional padding byte, if needed so length becomes odd)
- *	- nc_trailer
- *
- * This framing is to be avoided for non-NetChip devices.
- */
-
-struct nc_header {		// packed:
-	__le16	hdr_len;		// sizeof nc_header (LE, all)
-	__le16	packet_len;		// payload size (including ethhdr)
-	__le16	packet_id;		// detects dropped packets
-#define MIN_HEADER	6
-
-	// all else is optional, and must start with:
-	// __le16	vendorId;	// from usb-if
-	// __le16	productId;
-} __attribute__((__packed__));
-
-#define	PAD_BYTE	((unsigned char)0xAC)
-
-struct nc_trailer {
-	__le16	packet_id;
-} __attribute__((__packed__));
-
-// packets may use FLAG_FRAMING_NC and optional pad
-#define FRAMED_SIZE(mtu) (sizeof (struct nc_header) \
-				+ sizeof (struct ethhdr) \
-				+ (mtu) \
-				+ 1 \
-				+ sizeof (struct nc_trailer))
-
-#define MIN_FRAMED	FRAMED_SIZE(0)
-
-/* packets _could_ be up to 64KB... */
-#define NC_MAX_PACKET	32767
-
-
-/*
- * Zero means no timeout; else, how long a 64 byte bulk packet may be queued
- * before the hardware drops it.  If that's done, the driver will need to
- * frame network packets to guard against the dropped USB packets.  The win32
- * driver sets this for both sides of the link.
- */
-#define	NC_READ_TTL_MS	((u8)255)	// ms
-
-/*
- * We ignore most registers and EEPROM contents.
- */
-#define	REG_USBCTL	((u8)0x04)
-#define REG_TTL		((u8)0x10)
-#define REG_STATUS	((u8)0x11)
-
-/*
- * Vendor specific requests to read/write data
- */
-#define	REQUEST_REGISTER	((u8)0x10)
-#define	REQUEST_EEPROM		((u8)0x11)
-
-static int
-nc_vendor_read(struct usbnet *dev, u8 req, u8 regnum, u16 *retval_ptr)
-{
-	int status = usb_control_msg(dev->udev,
-		usb_rcvctrlpipe(dev->udev, 0),
-		req,
-		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-		0, regnum,
-		retval_ptr, sizeof *retval_ptr,
-		USB_CTRL_GET_TIMEOUT);
-	if (status > 0)
-		status = 0;
-	if (!status)
-		le16_to_cpus(retval_ptr);
-	return status;
-}
-
-static inline int
-nc_register_read(struct usbnet *dev, u8 regnum, u16 *retval_ptr)
-{
-	return nc_vendor_read(dev, REQUEST_REGISTER, regnum, retval_ptr);
-}
-
-// no retval ... can become async, usable in_interrupt()
-static void
-nc_vendor_write(struct usbnet *dev, u8 req, u8 regnum, u16 value)
-{
-	usb_control_msg(dev->udev,
-		usb_sndctrlpipe(dev->udev, 0),
-		req,
-		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-		value, regnum,
-		NULL, 0,			// data is in setup packet
-		USB_CTRL_SET_TIMEOUT);
-}
-
-static inline void
-nc_register_write(struct usbnet *dev, u8 regnum, u16 value)
-{
-	nc_vendor_write(dev, REQUEST_REGISTER, regnum, value);
-}
-
-
-#if 0
-static void nc_dump_registers(struct usbnet *dev)
-{
-	u8	reg;
-	u16	*vp = kmalloc(sizeof (u16));
-
-	if (!vp) {
-		dbg("no memory?");
-		return;
-	}
-
-	dbg("%s registers:", dev->net->name);
-	for (reg = 0; reg < 0x20; reg++) {
-		int retval;
-
-		// reading some registers is trouble
-		if (reg >= 0x08 && reg <= 0xf)
-			continue;
-		if (reg >= 0x12 && reg <= 0x1e)
-			continue;
-
-		retval = nc_register_read(dev, reg, vp);
-		if (retval < 0)
-			dbg("%s reg [0x%x] ==> error %d",
-				dev->net->name, reg, retval);
-		else
-			dbg("%s reg [0x%x] = 0x%x",
-				dev->net->name, reg, *vp);
-	}
-	kfree(vp);
-}
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Control register
- */
-
-#define	USBCTL_WRITABLE_MASK	0x1f0f
-// bits 15-13 reserved, r/o
-#define	USBCTL_ENABLE_LANG	(1 << 12)
-#define	USBCTL_ENABLE_MFGR	(1 << 11)
-#define	USBCTL_ENABLE_PROD	(1 << 10)
-#define	USBCTL_ENABLE_SERIAL	(1 << 9)
-#define	USBCTL_ENABLE_DEFAULTS	(1 << 8)
-// bits 7-4 reserved, r/o
-#define	USBCTL_FLUSH_OTHER	(1 << 3)
-#define	USBCTL_FLUSH_THIS	(1 << 2)
-#define	USBCTL_DISCONN_OTHER	(1 << 1)
-#define	USBCTL_DISCONN_THIS	(1 << 0)
-
-static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl)
-{
-	if (!netif_msg_link(dev))
-		return;
-	devdbg(dev, "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s;"
-			" this%s%s;"
-			" other%s%s; r/o 0x%x",
-		dev->udev->bus->bus_name, dev->udev->devpath,
-		usbctl,
-		(usbctl & USBCTL_ENABLE_LANG) ? " lang" : "",
-		(usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "",
-		(usbctl & USBCTL_ENABLE_PROD) ? " prod" : "",
-		(usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "",
-		(usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "",
-
-		(usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "",
-		(usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "",
-		(usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "",
-		(usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "",
-		usbctl & ~USBCTL_WRITABLE_MASK
-		);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Status register
- */
-
-#define	STATUS_PORT_A		(1 << 15)
-
-#define	STATUS_CONN_OTHER	(1 << 14)
-#define	STATUS_SUSPEND_OTHER	(1 << 13)
-#define	STATUS_MAILBOX_OTHER	(1 << 12)
-#define	STATUS_PACKETS_OTHER(n)	(((n) >> 8) & 0x03)
-
-#define	STATUS_CONN_THIS	(1 << 6)
-#define	STATUS_SUSPEND_THIS	(1 << 5)
-#define	STATUS_MAILBOX_THIS	(1 << 4)
-#define	STATUS_PACKETS_THIS(n)	(((n) >> 0) & 0x03)
-
-#define	STATUS_UNSPEC_MASK	0x0c8c
-#define	STATUS_NOISE_MASK 	((u16)~(0x0303|STATUS_UNSPEC_MASK))
-
-
-static inline void nc_dump_status(struct usbnet *dev, u16 status)
-{
-	if (!netif_msg_link(dev))
-		return;
-	devdbg(dev, "net1080 %s-%s status 0x%x:"
-			" this (%c) PKT=%d%s%s%s;"
-			" other PKT=%d%s%s%s; unspec 0x%x",
-		dev->udev->bus->bus_name, dev->udev->devpath,
-		status,
-
-		// XXX the packet counts don't seem right
-		// (1 at reset, not 0); maybe UNSPEC too
-
-		(status & STATUS_PORT_A) ? 'A' : 'B',
-		STATUS_PACKETS_THIS(status),
-		(status & STATUS_CONN_THIS) ? " CON" : "",
-		(status & STATUS_SUSPEND_THIS) ? " SUS" : "",
-		(status & STATUS_MAILBOX_THIS) ? " MBOX" : "",
-
-		STATUS_PACKETS_OTHER(status),
-		(status & STATUS_CONN_OTHER) ? " CON" : "",
-		(status & STATUS_SUSPEND_OTHER) ? " SUS" : "",
-		(status & STATUS_MAILBOX_OTHER) ? " MBOX" : "",
-
-		status & STATUS_UNSPEC_MASK
-		);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * TTL register
- */
-
-#define	TTL_THIS(ttl)	(0x00ff & ttl)
-#define	TTL_OTHER(ttl)	(0x00ff & (ttl >> 8))
-#define MK_TTL(this,other)	((u16)(((other)<<8)|(0x00ff&(this))))
-
-static inline void nc_dump_ttl(struct usbnet *dev, u16 ttl)
-{
-	if (netif_msg_link(dev))
-		devdbg(dev, "net1080 %s-%s ttl 0x%x this = %d, other = %d",
-			dev->udev->bus->bus_name, dev->udev->devpath,
-			ttl, TTL_THIS(ttl), TTL_OTHER(ttl));
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int net1080_reset(struct usbnet *dev)
-{
-	u16		usbctl, status, ttl;
-	u16		*vp = kmalloc(sizeof (u16), GFP_KERNEL);
-	int		retval;
-
-	if (!vp)
-		return -ENOMEM;
-
-	// nc_dump_registers(dev);
-
-	if ((retval = nc_register_read(dev, REG_STATUS, vp)) < 0) {
-		dbg("can't read %s-%s status: %d",
-			dev->udev->bus->bus_name, dev->udev->devpath, retval);
-		goto done;
-	}
-	status = *vp;
-	nc_dump_status(dev, status);
-
-	if ((retval = nc_register_read(dev, REG_USBCTL, vp)) < 0) {
-		dbg("can't read USBCTL, %d", retval);
-		goto done;
-	}
-	usbctl = *vp;
-	nc_dump_usbctl(dev, usbctl);
-
-	nc_register_write(dev, REG_USBCTL,
-			USBCTL_FLUSH_THIS | USBCTL_FLUSH_OTHER);
-
-	if ((retval = nc_register_read(dev, REG_TTL, vp)) < 0) {
-		dbg("can't read TTL, %d", retval);
-		goto done;
-	}
-	ttl = *vp;
-	// nc_dump_ttl(dev, ttl);
-
-	nc_register_write(dev, REG_TTL,
-			MK_TTL(NC_READ_TTL_MS, TTL_OTHER(ttl)) );
-	dbg("%s: assigned TTL, %d ms", dev->net->name, NC_READ_TTL_MS);
-
-	if (netif_msg_link(dev))
-		devinfo(dev, "port %c, peer %sconnected",
-			(status & STATUS_PORT_A) ? 'A' : 'B',
-			(status & STATUS_CONN_OTHER) ? "" : "dis"
-			);
-	retval = 0;
-
-done:
-	kfree(vp);
-	return retval;
-}
-
-static int net1080_check_connect(struct usbnet *dev)
-{
-	int			retval;
-	u16			status;
-	u16			*vp = kmalloc(sizeof (u16), GFP_KERNEL);
-
-	if (!vp)
-		return -ENOMEM;
-	retval = nc_register_read(dev, REG_STATUS, vp);
-	status = *vp;
-	kfree(vp);
-	if (retval != 0) {
-		dbg("%s net1080_check_conn read - %d", dev->net->name, retval);
-		return retval;
-	}
-	if ((status & STATUS_CONN_OTHER) != STATUS_CONN_OTHER)
-		return -ENOLINK;
-	return 0;
-}
-
-static void nc_flush_complete(struct urb *urb)
-{
-	kfree(urb->context);
-	usb_free_urb(urb);
-}
-
-static void nc_ensure_sync(struct usbnet *dev)
-{
-	dev->frame_errors++;
-	if (dev->frame_errors > 5) {
-		struct urb		*urb;
-		struct usb_ctrlrequest	*req;
-		int			status;
-
-		/* Send a flush */
-		urb = usb_alloc_urb(0, GFP_ATOMIC);
-		if (!urb)
-			return;
-
-		req = kmalloc(sizeof *req, GFP_ATOMIC);
-		if (!req) {
-			usb_free_urb(urb);
-			return;
-		}
-
-		req->bRequestType = USB_DIR_OUT
-			| USB_TYPE_VENDOR
-			| USB_RECIP_DEVICE;
-		req->bRequest = REQUEST_REGISTER;
-		req->wValue = cpu_to_le16(USBCTL_FLUSH_THIS
-				| USBCTL_FLUSH_OTHER);
-		req->wIndex = cpu_to_le16(REG_USBCTL);
-		req->wLength = cpu_to_le16(0);
-
-		/* queue an async control request, we don't need
-		 * to do anything when it finishes except clean up.
-		 */
-		usb_fill_control_urb(urb, dev->udev,
-			usb_sndctrlpipe(dev->udev, 0),
-			(unsigned char *) req,
-			NULL, 0,
-			nc_flush_complete, req);
-		status = usb_submit_urb(urb, GFP_ATOMIC);
-		if (status) {
-			kfree(req);
-			usb_free_urb(urb);
-			return;
-		}
-
-		if (netif_msg_rx_err(dev))
-			devdbg(dev, "flush net1080; too many framing errors");
-		dev->frame_errors = 0;
-	}
-}
-
-static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
-{
-	struct nc_header	*header;
-	struct nc_trailer	*trailer;
-	u16			hdr_len, packet_len;
-
-	if (!(skb->len & 0x01)) {
-#ifdef DEBUG
-		struct net_device	*net = dev->net;
-		dbg("rx framesize %d range %d..%d mtu %d", skb->len,
-			net->hard_header_len, dev->hard_mtu, net->mtu);
-#endif
-		dev->stats.rx_frame_errors++;
-		nc_ensure_sync(dev);
-		return 0;
-	}
-
-	header = (struct nc_header *) skb->data;
-	hdr_len = le16_to_cpup(&header->hdr_len);
-	packet_len = le16_to_cpup(&header->packet_len);
-	if (FRAMED_SIZE(packet_len) > NC_MAX_PACKET) {
-		dev->stats.rx_frame_errors++;
-		dbg("packet too big, %d", packet_len);
-		nc_ensure_sync(dev);
-		return 0;
-	} else if (hdr_len < MIN_HEADER) {
-		dev->stats.rx_frame_errors++;
-		dbg("header too short, %d", hdr_len);
-		nc_ensure_sync(dev);
-		return 0;
-	} else if (hdr_len > MIN_HEADER) {
-		// out of band data for us?
-		dbg("header OOB, %d bytes", hdr_len - MIN_HEADER);
-		nc_ensure_sync(dev);
-		// switch (vendor/product ids) { ... }
-	}
-	skb_pull(skb, hdr_len);
-
-	trailer = (struct nc_trailer *)
-		(skb->data + skb->len - sizeof *trailer);
-	skb_trim(skb, skb->len - sizeof *trailer);
-
-	if ((packet_len & 0x01) == 0) {
-		if (skb->data [packet_len] != PAD_BYTE) {
-			dev->stats.rx_frame_errors++;
-			dbg("bad pad");
-			return 0;
-		}
-		skb_trim(skb, skb->len - 1);
-	}
-	if (skb->len != packet_len) {
-		dev->stats.rx_frame_errors++;
-		dbg("bad packet len %d (expected %d)",
-			skb->len, packet_len);
-		nc_ensure_sync(dev);
-		return 0;
-	}
-	if (header->packet_id != get_unaligned(&trailer->packet_id)) {
-		dev->stats.rx_fifo_errors++;
-		dbg("(2+ dropped) rx packet_id mismatch 0x%x 0x%x",
-			le16_to_cpu(header->packet_id),
-			le16_to_cpu(trailer->packet_id));
-		return 0;
-	}
-#if 0
-	devdbg(dev, "frame <rx h %d p %d id %d", header->hdr_len,
-		header->packet_len, header->packet_id);
-#endif
-	dev->frame_errors = 0;
-	return 1;
-}
-
-static struct sk_buff *
-net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
-{
-	struct sk_buff		*skb2;
-	struct nc_header	*header = NULL;
-	struct nc_trailer	*trailer = NULL;
-	int			padlen = sizeof (struct nc_trailer);
-	int			len = skb->len;
-
-	if (!((len + padlen + sizeof (struct nc_header)) & 0x01))
-		padlen++;
-	if (!skb_cloned(skb)) {
-		int	headroom = skb_headroom(skb);
-		int	tailroom = skb_tailroom(skb);
-
-		if (padlen <= tailroom &&
-		    sizeof(struct nc_header) <= headroom)
-			/* There's enough head and tail room */
-			goto encapsulate;
-
-		if ((sizeof (struct nc_header) + padlen) <
-				(headroom + tailroom)) {
-			/* There's enough total room, so just readjust */
-			skb->data = memmove(skb->head
-						+ sizeof (struct nc_header),
-					    skb->data, skb->len);
-			skb_set_tail_pointer(skb, len);
-			goto encapsulate;
-		}
-	}
-
-	/* Create a new skb to use with the correct size */
-	skb2 = skb_copy_expand(skb,
-				sizeof (struct nc_header),
-				padlen,
-				flags);
-	dev_kfree_skb_any(skb);
-	if (!skb2)
-		return skb2;
-	skb = skb2;
-
-encapsulate:
-	/* header first */
-	header = (struct nc_header *) skb_push(skb, sizeof *header);
-	header->hdr_len = cpu_to_le16(sizeof (*header));
-	header->packet_len = cpu_to_le16(len);
-	header->packet_id = cpu_to_le16((u16)dev->xid++);
-
-	/* maybe pad; then trailer */
-	if (!((skb->len + sizeof *trailer) & 0x01))
-		*skb_put(skb, 1) = PAD_BYTE;
-	trailer = (struct nc_trailer *) skb_put(skb, sizeof *trailer);
-	put_unaligned(header->packet_id, &trailer->packet_id);
-#if 0
-	devdbg(dev, "frame >tx h %d p %d id %d",
-		header->hdr_len, header->packet_len,
-		header->packet_id);
-#endif
-	return skb;
-}
-
-static int net1080_bind(struct usbnet *dev, struct usb_interface *intf)
-{
-	unsigned	extra = sizeof (struct nc_header)
-				+ 1
-				+ sizeof (struct nc_trailer);
-
-	dev->net->hard_header_len += extra;
-	dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
-	dev->hard_mtu = NC_MAX_PACKET;
-	return usbnet_get_endpoints (dev, intf);
-}
-
-static const struct driver_info	net1080_info = {
-	.description =	"NetChip TurboCONNECT",
-	.flags =	FLAG_FRAMING_NC,
-	.bind =		net1080_bind,
-	.reset =	net1080_reset,
-	.check_connect = net1080_check_connect,
-	.rx_fixup =	net1080_rx_fixup,
-	.tx_fixup =	net1080_tx_fixup,
-};
-
-static const struct usb_device_id	products [] = {
-{
-	USB_DEVICE(0x0525, 0x1080),	// NetChip ref design
-	.driver_info =	(unsigned long) &net1080_info,
-}, {
-	USB_DEVICE(0x06D0, 0x0622),	// Laplink Gold
-	.driver_info =	(unsigned long) &net1080_info,
-},
-	{ },		// END
-};
-MODULE_DEVICE_TABLE(usb, products);
-
-static struct usb_driver net1080_driver = {
-	.name =		"net1080",
-	.id_table =	products,
-	.probe =	usbnet_probe,
-	.disconnect =	usbnet_disconnect,
-	.suspend =	usbnet_suspend,
-	.resume =	usbnet_resume,
-};
-
-static int __init net1080_init(void)
-{
- 	return usb_register(&net1080_driver);
-}
-module_init(net1080_init);
-
-static void __exit net1080_exit(void)
-{
- 	usb_deregister(&net1080_driver);
-}
-module_exit(net1080_exit);
-
-MODULE_AUTHOR("David Brownell");
-MODULE_DESCRIPTION("NetChip 1080 based USB Host-to-Host Links");
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
deleted file mode 100644
index a05fd97e5bc..00000000000
--- a/drivers/usb/net/pegasus.c
+++ /dev/null
@@ -1,1504 +0,0 @@
-/*
- *  Copyright (c) 1999-2005 Petko Manolov (petkan@users.sourceforge.net)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *	ChangeLog:
- *		....	Most of the time spent on reading sources & docs.
- *		v0.2.x	First official release for the Linux kernel.
- *		v0.3.0	Beutified and structured, some bugs fixed.
- *		v0.3.x	URBifying bulk requests and bugfixing. First relatively
- *			stable release. Still can touch device's registers only
- *			from top-halves.
- *		v0.4.0	Control messages remained unurbified are now URBs.
- *			Now we can touch the HW at any time.
- *		v0.4.9	Control urbs again use process context to wait. Argh...
- *			Some long standing bugs (enable_net_traffic) fixed.
- *			Also nasty trick about resubmiting control urb from
- *			interrupt context used. Please let me know how it
- *			behaves. Pegasus II support added since this version.
- *			TODO: suppressing HCD warnings spewage on disconnect.
- *		v0.4.13	Ethernet address is now set at probe(), not at open()
- *			time as this seems to break dhcpd. 
- *		v0.5.0	branch to 2.5.x kernels
- *		v0.5.1	ethtool support added
- *		v0.5.5	rx socket buffers are in a pool and the their allocation
- * 			is out of the interrupt routine.
- */
-
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/usb.h>
-#include <linux/module.h>
-#include <asm/byteorder.h>
-#include <asm/uaccess.h>
-#include "pegasus.h"
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v0.6.14 (2006/09/27)"
-#define DRIVER_AUTHOR "Petko Manolov <petkan@users.sourceforge.net>"
-#define DRIVER_DESC "Pegasus/Pegasus II USB Ethernet driver"
-
-static const char driver_name[] = "pegasus";
-
-#undef	PEGASUS_WRITE_EEPROM
-#define	BMSR_MEDIA	(BMSR_10HALF | BMSR_10FULL | BMSR_100HALF | \
-			BMSR_100FULL | BMSR_ANEGCAPABLE)
-
-static int loopback = 0;
-static int mii_mode = 0;
-static char *devid=NULL;
-
-static struct usb_eth_dev usb_dev_id[] = {
-#define	PEGASUS_DEV(pn, vid, pid, flags)	\
-	{.name = pn, .vendor = vid, .device = pid, .private = flags},
-#include "pegasus.h"
-#undef	PEGASUS_DEV
-	{NULL, 0, 0, 0},
-	{NULL, 0, 0, 0}
-};
-
-static struct usb_device_id pegasus_ids[] = {
-#define	PEGASUS_DEV(pn, vid, pid, flags) \
-	{.match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = vid, .idProduct = pid},
-#include "pegasus.h"
-#undef	PEGASUS_DEV
-	{},
-	{}
-};
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-module_param(loopback, bool, 0);
-module_param(mii_mode, bool, 0);
-module_param(devid, charp, 0);
-MODULE_PARM_DESC(loopback, "Enable MAC loopback mode (bit 0)");
-MODULE_PARM_DESC(mii_mode, "Enable HomePNA mode (bit 0),default=MII mode = 0");
-MODULE_PARM_DESC(devid, "The format is: 'DEV_name:VendorID:DeviceID:Flags'");
-
-/* use ethtool to change the level for any given device */
-static int msg_level = -1;
-module_param (msg_level, int, 0);
-MODULE_PARM_DESC (msg_level, "Override default message level");
-
-MODULE_DEVICE_TABLE(usb, pegasus_ids);
-
-static int update_eth_regs_async(pegasus_t *);
-/* Aargh!!! I _really_ hate such tweaks */
-static void ctrl_callback(struct urb *urb)
-{
-	pegasus_t *pegasus = urb->context;
-
-	if (!pegasus)
-		return;
-
-	switch (urb->status) {
-	case 0:
-		if (pegasus->flags & ETH_REGS_CHANGE) {
-			pegasus->flags &= ~ETH_REGS_CHANGE;
-			pegasus->flags |= ETH_REGS_CHANGED;
-			update_eth_regs_async(pegasus);
-			return;
-		}
-		break;
-	case -EINPROGRESS:
-		return;
-	case -ENOENT:
-		break;
-	default:
-		if (netif_msg_drv(pegasus))
-			dev_dbg(&pegasus->intf->dev, "%s, status %d\n",
-				__FUNCTION__, urb->status);
-	}
-	pegasus->flags &= ~ETH_REGS_CHANGED;
-	wake_up(&pegasus->ctrl_wait);
-}
-
-static int get_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
-			 void *data)
-{
-	int ret;
-	char *buffer;
-	DECLARE_WAITQUEUE(wait, current);
-
-	buffer = kmalloc(size, GFP_KERNEL);
-	if (!buffer) {
-		if (netif_msg_drv(pegasus))
-			dev_warn(&pegasus->intf->dev, "out of memory in %s\n",
-					__FUNCTION__);
-		return -ENOMEM;
-	}
-	add_wait_queue(&pegasus->ctrl_wait, &wait);
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	while (pegasus->flags & ETH_REGS_CHANGED)
-		schedule();
-	remove_wait_queue(&pegasus->ctrl_wait, &wait);
-	set_current_state(TASK_RUNNING);
-
-	pegasus->dr.bRequestType = PEGASUS_REQT_READ;
-	pegasus->dr.bRequest = PEGASUS_REQ_GET_REGS;
-	pegasus->dr.wValue = cpu_to_le16(0);
-	pegasus->dr.wIndex = cpu_to_le16p(&indx);
-	pegasus->dr.wLength = cpu_to_le16p(&size);
-	pegasus->ctrl_urb->transfer_buffer_length = size;
-
-	usb_fill_control_urb(pegasus->ctrl_urb, pegasus->usb,
-			     usb_rcvctrlpipe(pegasus->usb, 0),
-			     (char *) &pegasus->dr,
-			     buffer, size, ctrl_callback, pegasus);
-
-	add_wait_queue(&pegasus->ctrl_wait, &wait);
-	set_current_state(TASK_UNINTERRUPTIBLE);
-
-	/* using ATOMIC, we'd never wake up if we slept */
-	if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
-		set_current_state(TASK_RUNNING);
-		if (ret == -ENODEV)
-			netif_device_detach(pegasus->net);
-		if (netif_msg_drv(pegasus))
-			dev_err(&pegasus->intf->dev, "%s, status %d\n",
-					__FUNCTION__, ret);
-		goto out;
-	}
-
-	schedule();
-out:
-	remove_wait_queue(&pegasus->ctrl_wait, &wait);
-	memcpy(data, buffer, size);
-	kfree(buffer);
-
-	return ret;
-}
-
-static int set_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
-			 void *data)
-{
-	int ret;
-	char *buffer;
-	DECLARE_WAITQUEUE(wait, current);
-
-	buffer = kmalloc(size, GFP_KERNEL);
-	if (!buffer) {
-		if (netif_msg_drv(pegasus))
-			dev_warn(&pegasus->intf->dev, "out of memory in %s\n",
-					__FUNCTION__);
-		return -ENOMEM;
-	}
-	memcpy(buffer, data, size);
-
-	add_wait_queue(&pegasus->ctrl_wait, &wait);
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	while (pegasus->flags & ETH_REGS_CHANGED)
-		schedule();
-	remove_wait_queue(&pegasus->ctrl_wait, &wait);
-	set_current_state(TASK_RUNNING);
-
-	pegasus->dr.bRequestType = PEGASUS_REQT_WRITE;
-	pegasus->dr.bRequest = PEGASUS_REQ_SET_REGS;
-	pegasus->dr.wValue = cpu_to_le16(0);
-	pegasus->dr.wIndex = cpu_to_le16p(&indx);
-	pegasus->dr.wLength = cpu_to_le16p(&size);
-	pegasus->ctrl_urb->transfer_buffer_length = size;
-
-	usb_fill_control_urb(pegasus->ctrl_urb, pegasus->usb,
-			     usb_sndctrlpipe(pegasus->usb, 0),
-			     (char *) &pegasus->dr,
-			     buffer, size, ctrl_callback, pegasus);
-
-	add_wait_queue(&pegasus->ctrl_wait, &wait);
-	set_current_state(TASK_UNINTERRUPTIBLE);
-
-	if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
-		if (ret == -ENODEV)
-			netif_device_detach(pegasus->net);
-		if (netif_msg_drv(pegasus))
-			dev_err(&pegasus->intf->dev, "%s, status %d\n",
-					__FUNCTION__, ret);
-		goto out;
-	}
-
-	schedule();
-out:
-	remove_wait_queue(&pegasus->ctrl_wait, &wait);
-	kfree(buffer);
-
-	return ret;
-}
-
-static int set_register(pegasus_t * pegasus, __u16 indx, __u8 data)
-{
-	int ret;
-	char *tmp;
-	DECLARE_WAITQUEUE(wait, current);
-
-	tmp = kmalloc(1, GFP_KERNEL);
-	if (!tmp) {
-		if (netif_msg_drv(pegasus))
-			dev_warn(&pegasus->intf->dev, "out of memory in %s\n",
-					__FUNCTION__);
-		return -ENOMEM;
-	}
-	memcpy(tmp, &data, 1);
-	add_wait_queue(&pegasus->ctrl_wait, &wait);
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	while (pegasus->flags & ETH_REGS_CHANGED)
-		schedule();
-	remove_wait_queue(&pegasus->ctrl_wait, &wait);
-	set_current_state(TASK_RUNNING);
-
-	pegasus->dr.bRequestType = PEGASUS_REQT_WRITE;
-	pegasus->dr.bRequest = PEGASUS_REQ_SET_REG;
-	pegasus->dr.wValue = cpu_to_le16(data);
-	pegasus->dr.wIndex = cpu_to_le16p(&indx);
-	pegasus->dr.wLength = cpu_to_le16(1);
-	pegasus->ctrl_urb->transfer_buffer_length = 1;
-
-	usb_fill_control_urb(pegasus->ctrl_urb, pegasus->usb,
-			     usb_sndctrlpipe(pegasus->usb, 0),
-			     (char *) &pegasus->dr,
-			     tmp, 1, ctrl_callback, pegasus);
-
-	add_wait_queue(&pegasus->ctrl_wait, &wait);
-	set_current_state(TASK_UNINTERRUPTIBLE);
-
-	if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
-		if (ret == -ENODEV)
-			netif_device_detach(pegasus->net);
-		if (netif_msg_drv(pegasus))
-			dev_err(&pegasus->intf->dev, "%s, status %d\n",
-					__FUNCTION__, ret);
-		goto out;
-	}
-
-	schedule();
-out:
-	remove_wait_queue(&pegasus->ctrl_wait, &wait);
-	kfree(tmp);
-
-	return ret;
-}
-
-static int update_eth_regs_async(pegasus_t * pegasus)
-{
-	int ret;
-
-	pegasus->dr.bRequestType = PEGASUS_REQT_WRITE;
-	pegasus->dr.bRequest = PEGASUS_REQ_SET_REGS;
-	pegasus->dr.wValue = 0;
-	pegasus->dr.wIndex = cpu_to_le16(EthCtrl0);
-	pegasus->dr.wLength = cpu_to_le16(3);
-	pegasus->ctrl_urb->transfer_buffer_length = 3;
-
-	usb_fill_control_urb(pegasus->ctrl_urb, pegasus->usb,
-			     usb_sndctrlpipe(pegasus->usb, 0),
-			     (char *) &pegasus->dr,
-			     pegasus->eth_regs, 3, ctrl_callback, pegasus);
-
-	if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
-		if (ret == -ENODEV)
-			netif_device_detach(pegasus->net);
-		if (netif_msg_drv(pegasus))
-			dev_err(&pegasus->intf->dev, "%s, status %d\n",
-					__FUNCTION__, ret);
-	}
-
-	return ret;
-}
-
-/* Returns 0 on success, error on failure */
-static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
-{
-	int i;
-	__u8 data[4] = { phy, 0, 0, indx };
-	__le16 regdi;
-	int ret;
-
-	set_register(pegasus, PhyCtrl, 0);
-	set_registers(pegasus, PhyAddr, sizeof (data), data);
-	set_register(pegasus, PhyCtrl, (indx | PHY_READ));
-	for (i = 0; i < REG_TIMEOUT; i++) {
-		ret = get_registers(pegasus, PhyCtrl, 1, data);
-		if (ret == -ESHUTDOWN)
-			goto fail;
-		if (data[0] & PHY_DONE)
-			break;
-	}
-	if (i < REG_TIMEOUT) {
-		ret = get_registers(pegasus, PhyData, 2, &regdi);
-		*regd = le16_to_cpu(regdi);
-		return ret;
-	}
-fail:
-	if (netif_msg_drv(pegasus))
-		dev_warn(&pegasus->intf->dev, "%s failed\n", __FUNCTION__);
-
-	return ret;
-}
-
-static int mdio_read(struct net_device *dev, int phy_id, int loc)
-{
-	pegasus_t *pegasus = (pegasus_t *) netdev_priv(dev);
-	u16 res;
-
-	read_mii_word(pegasus, phy_id, loc, &res);
-	return (int)res;
-}
-
-static int write_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 regd)
-{
-	int i;
-	__u8 data[4] = { phy, 0, 0, indx };
-	int ret;
-
-	data[1] = (u8) regd;
-	data[2] = (u8) (regd >> 8);
-	set_register(pegasus, PhyCtrl, 0);
-	set_registers(pegasus, PhyAddr, sizeof(data), data);
-	set_register(pegasus, PhyCtrl, (indx | PHY_WRITE));
-	for (i = 0; i < REG_TIMEOUT; i++) {
-		ret = get_registers(pegasus, PhyCtrl, 1, data);
-		if (ret == -ESHUTDOWN)
-			goto fail;
-		if (data[0] & PHY_DONE)
-			break;
-	}
-	if (i < REG_TIMEOUT)
-		return ret;
-
-fail:
-	if (netif_msg_drv(pegasus))
-		dev_warn(&pegasus->intf->dev, "%s failed\n", __FUNCTION__);
-	return -ETIMEDOUT;
-}
-
-static void mdio_write(struct net_device *dev, int phy_id, int loc, int val)
-{
-	pegasus_t *pegasus = (pegasus_t *) netdev_priv(dev);
-
-	write_mii_word(pegasus, phy_id, loc, val);
-}
-
-static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
-{
-	int i;
-	__u8 tmp;
-	__le16 retdatai;
-	int ret;
-
-	set_register(pegasus, EpromCtrl, 0);
-	set_register(pegasus, EpromOffset, index);
-	set_register(pegasus, EpromCtrl, EPROM_READ);
-
-	for (i = 0; i < REG_TIMEOUT; i++) {
-		ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
-		if (tmp & EPROM_DONE)
-			break;
-		if (ret == -ESHUTDOWN)
-			goto fail;
-	}
-	if (i < REG_TIMEOUT) {
-		ret = get_registers(pegasus, EpromData, 2, &retdatai);
-		*retdata = le16_to_cpu(retdatai);
-		return ret;
-	}
-
-fail:
-	if (netif_msg_drv(pegasus))
-		dev_warn(&pegasus->intf->dev, "%s failed\n", __FUNCTION__);
-	return -ETIMEDOUT;
-}
-
-#ifdef	PEGASUS_WRITE_EEPROM
-static inline void enable_eprom_write(pegasus_t * pegasus)
-{
-	__u8 tmp;
-	int ret;
-
-	get_registers(pegasus, EthCtrl2, 1, &tmp);
-	set_register(pegasus, EthCtrl2, tmp | EPROM_WR_ENABLE);
-}
-
-static inline void disable_eprom_write(pegasus_t * pegasus)
-{
-	__u8 tmp;
-	int ret;
-
-	get_registers(pegasus, EthCtrl2, 1, &tmp);
-	set_register(pegasus, EpromCtrl, 0);
-	set_register(pegasus, EthCtrl2, tmp & ~EPROM_WR_ENABLE);
-}
-
-static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data)
-{
-	int i;
-	__u8 tmp, d[4] = { 0x3f, 0, 0, EPROM_WRITE };
-	int ret;
-
-	set_registers(pegasus, EpromOffset, 4, d);
-	enable_eprom_write(pegasus);
-	set_register(pegasus, EpromOffset, index);
-	set_registers(pegasus, EpromData, 2, &data);
-	set_register(pegasus, EpromCtrl, EPROM_WRITE);
-
-	for (i = 0; i < REG_TIMEOUT; i++) {
-		ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
-		if (ret == -ESHUTDOWN)
-			goto fail;
-		if (tmp & EPROM_DONE)
-			break;
-	}
-	disable_eprom_write(pegasus);
-	if (i < REG_TIMEOUT)
-		return ret;
-fail:
-	if (netif_msg_drv(pegasus))
-		dev_warn(&pegasus->intf->dev, "%s failed\n", __FUNCTION__);
-	return -ETIMEDOUT;
-}
-#endif				/* PEGASUS_WRITE_EEPROM */
-
-static inline void get_node_id(pegasus_t * pegasus, __u8 * id)
-{
-	int i;
-	__u16 w16;
-
-	for (i = 0; i < 3; i++) {
-		read_eprom_word(pegasus, i, &w16);
-		((__le16 *) id)[i] = cpu_to_le16p(&w16);
-	}
-}
-
-static void set_ethernet_addr(pegasus_t * pegasus)
-{
-	__u8 node_id[6];
-
-	if (pegasus->features & PEGASUS_II) {
-		get_registers(pegasus, 0x10, sizeof(node_id), node_id);
-	} else {
-		get_node_id(pegasus, node_id);
-		set_registers(pegasus, EthID, sizeof (node_id), node_id);
-	}
-	memcpy(pegasus->net->dev_addr, node_id, sizeof (node_id));
-}
-
-static inline int reset_mac(pegasus_t * pegasus)
-{
-	__u8 data = 0x8;
-	int i;
-
-	set_register(pegasus, EthCtrl1, data);
-	for (i = 0; i < REG_TIMEOUT; i++) {
-		get_registers(pegasus, EthCtrl1, 1, &data);
-		if (~data & 0x08) {
-			if (loopback & 1)
-				break;
-			if (mii_mode && (pegasus->features & HAS_HOME_PNA))
-				set_register(pegasus, Gpio1, 0x34);
-			else
-				set_register(pegasus, Gpio1, 0x26);
-			set_register(pegasus, Gpio0, pegasus->features);
-			set_register(pegasus, Gpio0, DEFAULT_GPIO_SET);
-			break;
-		}
-	}
-	if (i == REG_TIMEOUT)
-		return -ETIMEDOUT;
-
-	if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS ||
-	    usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) {
-		set_register(pegasus, Gpio0, 0x24);
-		set_register(pegasus, Gpio0, 0x26);
-	}
-	if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_ELCON) {
-		__u16 auxmode;
-		read_mii_word(pegasus, 3, 0x1b, &auxmode);
-		write_mii_word(pegasus, 3, 0x1b, auxmode | 4);
-	}
-
-	return 0;
-}
-
-static int enable_net_traffic(struct net_device *dev, struct usb_device *usb)
-{
-	__u16 linkpart;
-	__u8 data[4];
-	pegasus_t *pegasus = netdev_priv(dev);
-	int ret;
-
-	read_mii_word(pegasus, pegasus->phy, MII_LPA, &linkpart);
-	data[0] = 0xc9;
-	data[1] = 0;
-	if (linkpart & (ADVERTISE_100FULL | ADVERTISE_10FULL))
-		data[1] |= 0x20;	/* set full duplex */
-	if (linkpart & (ADVERTISE_100FULL | ADVERTISE_100HALF))
-		data[1] |= 0x10;	/* set 100 Mbps */
-	if (mii_mode)
-		data[1] = 0;
-	data[2] = (loopback & 1) ? 0x09 : 0x01;
-
-	memcpy(pegasus->eth_regs, data, sizeof (data));
-	ret = set_registers(pegasus, EthCtrl0, 3, data);
-
-	if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS ||
-	    usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS2 ||
-	    usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) {
-		u16 auxmode;
-		read_mii_word(pegasus, 0, 0x1b, &auxmode);
-		write_mii_word(pegasus, 0, 0x1b, auxmode | 4);
-	}
-
-	return ret;
-}
-
-static void fill_skb_pool(pegasus_t * pegasus)
-{
-	int i;
-
-	for (i = 0; i < RX_SKBS; i++) {
-		if (pegasus->rx_pool[i])
-			continue;
-		pegasus->rx_pool[i] = dev_alloc_skb(PEGASUS_MTU + 2);
-		/*
-		 ** we give up if the allocation fail. the tasklet will be
-		 ** rescheduled again anyway...
-		 */
-		if (pegasus->rx_pool[i] == NULL)
-			return;
-		skb_reserve(pegasus->rx_pool[i], 2);
-	}
-}
-
-static void free_skb_pool(pegasus_t * pegasus)
-{
-	int i;
-
-	for (i = 0; i < RX_SKBS; i++) {
-		if (pegasus->rx_pool[i]) {
-			dev_kfree_skb(pegasus->rx_pool[i]);
-			pegasus->rx_pool[i] = NULL;
-		}
-	}
-}
-
-static inline struct sk_buff *pull_skb(pegasus_t * pegasus)
-{
-	int i;
-	struct sk_buff *skb;
-
-	for (i = 0; i < RX_SKBS; i++) {
-		if (likely(pegasus->rx_pool[i] != NULL)) {
-			skb = pegasus->rx_pool[i];
-			pegasus->rx_pool[i] = NULL;
-			return skb;
-		}
-	}
-	return NULL;
-}
-
-static void read_bulk_callback(struct urb *urb)
-{
-	pegasus_t *pegasus = urb->context;
-	struct net_device *net;
-	int rx_status, count = urb->actual_length;
-	u8 *buf = urb->transfer_buffer;
-	__u16 pkt_len;
-
-	if (!pegasus)
-		return;
-
-	net = pegasus->net;
-	if (!netif_device_present(net) || !netif_running(net))
-		return;
-
-	switch (urb->status) {
-	case 0:
-		break;
-	case -ETIME:
-		if (netif_msg_rx_err(pegasus))
-			pr_debug("%s: reset MAC\n", net->name);
-		pegasus->flags &= ~PEGASUS_RX_BUSY;
-		break;
-	case -EPIPE:		/* stall, or disconnect from TT */
-		/* FIXME schedule work to clear the halt */
-		if (netif_msg_rx_err(pegasus))
-			printk(KERN_WARNING "%s: no rx stall recovery\n",
-					net->name);
-		return;
-	case -ENOENT:
-	case -ECONNRESET:
-	case -ESHUTDOWN:
-		if (netif_msg_ifdown(pegasus))
-			pr_debug("%s: rx unlink, %d\n", net->name, urb->status);
-		return;
-	default:
-		if (netif_msg_rx_err(pegasus))
-			pr_debug("%s: RX status %d\n", net->name, urb->status);
-		goto goon;
-	}
-
-	if (!count || count < 4)
-		goto goon;
-
-	rx_status = buf[count - 2];
-	if (rx_status & 0x1e) {
-		if (netif_msg_rx_err(pegasus))
-			pr_debug("%s: RX packet error %x\n",
-					net->name, rx_status);
-		pegasus->stats.rx_errors++;
-		if (rx_status & 0x06)	// long or runt
-			pegasus->stats.rx_length_errors++;
-		if (rx_status & 0x08)
-			pegasus->stats.rx_crc_errors++;
-		if (rx_status & 0x10)	// extra bits
-			pegasus->stats.rx_frame_errors++;
-		goto goon;
-	}
-	if (pegasus->chip == 0x8513) {
-		pkt_len = le32_to_cpu(*(__le32 *)urb->transfer_buffer);
-		pkt_len &= 0x0fff;
-		pegasus->rx_skb->data += 2;
-	} else {
-		pkt_len = buf[count - 3] << 8;
-		pkt_len += buf[count - 4];
-		pkt_len &= 0xfff;
-		pkt_len -= 8;
-	}
-
-	/*
-	 * If the packet is unreasonably long, quietly drop it rather than
-	 * kernel panicing by calling skb_put.
-	 */
-	if (pkt_len > PEGASUS_MTU)
-		goto goon;
-
-	/*
-	 * at this point we are sure pegasus->rx_skb != NULL
-	 * so we go ahead and pass up the packet.
-	 */
-	skb_put(pegasus->rx_skb, pkt_len);
-	pegasus->rx_skb->protocol = eth_type_trans(pegasus->rx_skb, net);
-	netif_rx(pegasus->rx_skb);
-	pegasus->stats.rx_packets++;
-	pegasus->stats.rx_bytes += pkt_len;
-
-	if (pegasus->flags & PEGASUS_UNPLUG)
-		return;
-
-	spin_lock(&pegasus->rx_pool_lock);
-	pegasus->rx_skb = pull_skb(pegasus);
-	spin_unlock(&pegasus->rx_pool_lock);
-
-	if (pegasus->rx_skb == NULL)
-		goto tl_sched;
-goon:
-	usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
-			  usb_rcvbulkpipe(pegasus->usb, 1),
-			  pegasus->rx_skb->data, PEGASUS_MTU + 8,
-			  read_bulk_callback, pegasus);
-	rx_status = usb_submit_urb(pegasus->rx_urb, GFP_ATOMIC);
-	if (rx_status == -ENODEV)
-		netif_device_detach(pegasus->net);
-	else if (rx_status) {
-		pegasus->flags |= PEGASUS_RX_URB_FAIL;
-		goto tl_sched;
-	} else {
-		pegasus->flags &= ~PEGASUS_RX_URB_FAIL;
-	}
-
-	return;
-
-tl_sched:
-	tasklet_schedule(&pegasus->rx_tl);
-}
-
-static void rx_fixup(unsigned long data)
-{
-	pegasus_t *pegasus;
-	unsigned long flags;
-	int status;
-
-	pegasus = (pegasus_t *) data;
-	if (pegasus->flags & PEGASUS_UNPLUG)
-		return;
-
-	spin_lock_irqsave(&pegasus->rx_pool_lock, flags);
-	fill_skb_pool(pegasus);
-	if (pegasus->flags & PEGASUS_RX_URB_FAIL)
-		if (pegasus->rx_skb)
-			goto try_again;
-	if (pegasus->rx_skb == NULL) {
-		pegasus->rx_skb = pull_skb(pegasus);
-	}
-	if (pegasus->rx_skb == NULL) {
-		if (netif_msg_rx_err(pegasus))
-			printk(KERN_WARNING "%s: low on memory\n",
-					pegasus->net->name);
-		tasklet_schedule(&pegasus->rx_tl);
-		goto done;
-	}
-	usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
-			  usb_rcvbulkpipe(pegasus->usb, 1),
-			  pegasus->rx_skb->data, PEGASUS_MTU + 8,
-			  read_bulk_callback, pegasus);
-try_again:
-	status = usb_submit_urb(pegasus->rx_urb, GFP_ATOMIC);
-	if (status == -ENODEV)
-		netif_device_detach(pegasus->net);
-	else if (status) {
-		pegasus->flags |= PEGASUS_RX_URB_FAIL;
-		tasklet_schedule(&pegasus->rx_tl);
-	} else {
-		pegasus->flags &= ~PEGASUS_RX_URB_FAIL;
-	}
-done:
-	spin_unlock_irqrestore(&pegasus->rx_pool_lock, flags);
-}
-
-static void write_bulk_callback(struct urb *urb)
-{
-	pegasus_t *pegasus = urb->context;
-	struct net_device *net = pegasus->net;
-
-	if (!pegasus)
-		return;
-
-	if (!netif_device_present(net) || !netif_running(net))
-		return;
-
-	switch (urb->status) {
-	case -EPIPE:
-		/* FIXME schedule_work() to clear the tx halt */
-		netif_stop_queue(net);
-		if (netif_msg_tx_err(pegasus))
-			printk(KERN_WARNING "%s: no tx stall recovery\n",
-					net->name);
-		return;
-	case -ENOENT:
-	case -ECONNRESET:
-	case -ESHUTDOWN:
-		if (netif_msg_ifdown(pegasus))
-			pr_debug("%s: tx unlink, %d\n", net->name, urb->status);
-		return;
-	default:
-		if (netif_msg_tx_err(pegasus))
-			pr_info("%s: TX status %d\n", net->name, urb->status);
-		/* FALL THROUGH */
-	case 0:
-		break;
-	}
-
-	net->trans_start = jiffies;
-	netif_wake_queue(net);
-}
-
-static void intr_callback(struct urb *urb)
-{
-	pegasus_t *pegasus = urb->context;
-	struct net_device *net;
-	int status;
-
-	if (!pegasus)
-		return;
-	net = pegasus->net;
-
-	switch (urb->status) {
-	case 0:
-		break;
-	case -ECONNRESET:	/* unlink */
-	case -ENOENT:
-	case -ESHUTDOWN:
-		return;
-	default:
-		/* some Pegasus-I products report LOTS of data
-		 * toggle errors... avoid log spamming
-		 */
-		if (netif_msg_timer(pegasus))
-			pr_debug("%s: intr status %d\n", net->name,
-					urb->status);
-	}
-
-	if (urb->actual_length >= 6) {
-		u8	* d = urb->transfer_buffer;
-
-		/* byte 0 == tx_status1, reg 2B */
-		if (d[0] & (TX_UNDERRUN|EXCESSIVE_COL
-					|LATE_COL|JABBER_TIMEOUT)) {
-			pegasus->stats.tx_errors++;
-			if (d[0] & TX_UNDERRUN)
-				pegasus->stats.tx_fifo_errors++;
-			if (d[0] & (EXCESSIVE_COL | JABBER_TIMEOUT))
-				pegasus->stats.tx_aborted_errors++;
-			if (d[0] & LATE_COL)
-				pegasus->stats.tx_window_errors++;
-		}
-
-		/* d[5].LINK_STATUS lies on some adapters.
-		 * d[0].NO_CARRIER kicks in only with failed TX.
-		 * ... so monitoring with MII may be safest.
-		 */
-
-		/* bytes 3-4 == rx_lostpkt, reg 2E/2F */
-		pegasus->stats.rx_missed_errors += ((d[3] & 0x7f) << 8) | d[4];
-	}
-
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status == -ENODEV)
-		netif_device_detach(pegasus->net);
-	if (status && netif_msg_timer(pegasus))
-		printk(KERN_ERR "%s: can't resubmit interrupt urb, %d\n",
-				net->name, status);
-}
-
-static void pegasus_tx_timeout(struct net_device *net)
-{
-	pegasus_t *pegasus = netdev_priv(net);
-	if (netif_msg_timer(pegasus))
-		printk(KERN_WARNING "%s: tx timeout\n", net->name);
-	usb_unlink_urb(pegasus->tx_urb);
-	pegasus->stats.tx_errors++;
-}
-
-static int pegasus_start_xmit(struct sk_buff *skb, struct net_device *net)
-{
-	pegasus_t *pegasus = netdev_priv(net);
-	int count = ((skb->len + 2) & 0x3f) ? skb->len + 2 : skb->len + 3;
-	int res;
-	__u16 l16 = skb->len;
-
-	netif_stop_queue(net);
-
-	((__le16 *) pegasus->tx_buff)[0] = cpu_to_le16(l16);
-	skb_copy_from_linear_data(skb, pegasus->tx_buff + 2, skb->len);
-	usb_fill_bulk_urb(pegasus->tx_urb, pegasus->usb,
-			  usb_sndbulkpipe(pegasus->usb, 2),
-			  pegasus->tx_buff, count,
-			  write_bulk_callback, pegasus);
-	if ((res = usb_submit_urb(pegasus->tx_urb, GFP_ATOMIC))) {
-		if (netif_msg_tx_err(pegasus))
-			printk(KERN_WARNING "%s: fail tx, %d\n",
-					net->name, res);
-		switch (res) {
-		case -EPIPE:		/* stall, or disconnect from TT */
-			/* cleanup should already have been scheduled */
-			break;
-		case -ENODEV:		/* disconnect() upcoming */
-			netif_device_detach(pegasus->net);
-			break;
-		default:
-			pegasus->stats.tx_errors++;
-			netif_start_queue(net);
-		}
-	} else {
-		pegasus->stats.tx_packets++;
-		pegasus->stats.tx_bytes += skb->len;
-		net->trans_start = jiffies;
-	}
-	dev_kfree_skb(skb);
-
-	return 0;
-}
-
-static struct net_device_stats *pegasus_netdev_stats(struct net_device *dev)
-{
-	return &((pegasus_t *) netdev_priv(dev))->stats;
-}
-
-static inline void disable_net_traffic(pegasus_t * pegasus)
-{
-	int tmp = 0;
-
-	set_registers(pegasus, EthCtrl0, 2, &tmp);
-}
-
-static inline void get_interrupt_interval(pegasus_t * pegasus)
-{
-	__u8 data[2];
-
-	read_eprom_word(pegasus, 4, (__u16 *) data);
-	if (pegasus->usb->speed != USB_SPEED_HIGH) {
-		if (data[1] < 0x80) {
-			if (netif_msg_timer(pegasus))
-				dev_info(&pegasus->intf->dev, "intr interval "
-					"changed from %ums to %ums\n",
-					data[1], 0x80);
-			data[1] = 0x80;
-#ifdef PEGASUS_WRITE_EEPROM
-			write_eprom_word(pegasus, 4, *(__u16 *) data);
-#endif
-		}
-	}
-	pegasus->intr_interval = data[1];
-}
-
-static void set_carrier(struct net_device *net)
-{
-	pegasus_t *pegasus = netdev_priv(net);
-	u16 tmp;
-
-	if (read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
-		return;
-
-	if (tmp & BMSR_LSTATUS)
-		netif_carrier_on(net);
-	else
-		netif_carrier_off(net);
-}
-
-static void free_all_urbs(pegasus_t * pegasus)
-{
-	usb_free_urb(pegasus->intr_urb);
-	usb_free_urb(pegasus->tx_urb);
-	usb_free_urb(pegasus->rx_urb);
-	usb_free_urb(pegasus->ctrl_urb);
-}
-
-static void unlink_all_urbs(pegasus_t * pegasus)
-{
-	usb_kill_urb(pegasus->intr_urb);
-	usb_kill_urb(pegasus->tx_urb);
-	usb_kill_urb(pegasus->rx_urb);
-	usb_kill_urb(pegasus->ctrl_urb);
-}
-
-static int alloc_urbs(pegasus_t * pegasus)
-{
-	pegasus->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!pegasus->ctrl_urb) {
-		return 0;
-	}
-	pegasus->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!pegasus->rx_urb) {
-		usb_free_urb(pegasus->ctrl_urb);
-		return 0;
-	}
-	pegasus->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!pegasus->tx_urb) {
-		usb_free_urb(pegasus->rx_urb);
-		usb_free_urb(pegasus->ctrl_urb);
-		return 0;
-	}
-	pegasus->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!pegasus->intr_urb) {
-		usb_free_urb(pegasus->tx_urb);
-		usb_free_urb(pegasus->rx_urb);
-		usb_free_urb(pegasus->ctrl_urb);
-		return 0;
-	}
-
-	return 1;
-}
-
-static int pegasus_open(struct net_device *net)
-{
-	pegasus_t *pegasus = netdev_priv(net);
-	int res;
-
-	if (pegasus->rx_skb == NULL)
-		pegasus->rx_skb = pull_skb(pegasus);
-	/*
-	 ** Note: no point to free the pool.  it is empty :-)
-	 */
-	if (!pegasus->rx_skb)
-		return -ENOMEM;
-
-	res = set_registers(pegasus, EthID, 6, net->dev_addr);
-	
-	usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
-			  usb_rcvbulkpipe(pegasus->usb, 1),
-			  pegasus->rx_skb->data, PEGASUS_MTU + 8,
-			  read_bulk_callback, pegasus);
-	if ((res = usb_submit_urb(pegasus->rx_urb, GFP_KERNEL))) {
-		if (res == -ENODEV)
-			netif_device_detach(pegasus->net);
-		if (netif_msg_ifup(pegasus))
-			pr_debug("%s: failed rx_urb, %d", net->name, res);
-		goto exit;
-	}
-
-	usb_fill_int_urb(pegasus->intr_urb, pegasus->usb,
-			 usb_rcvintpipe(pegasus->usb, 3),
-			 pegasus->intr_buff, sizeof (pegasus->intr_buff),
-			 intr_callback, pegasus, pegasus->intr_interval);
-	if ((res = usb_submit_urb(pegasus->intr_urb, GFP_KERNEL))) {
-		if (res == -ENODEV)
-			netif_device_detach(pegasus->net);
-		if (netif_msg_ifup(pegasus))
-			pr_debug("%s: failed intr_urb, %d\n", net->name, res);
-		usb_kill_urb(pegasus->rx_urb);
-		goto exit;
-	}
-	if ((res = enable_net_traffic(net, pegasus->usb))) {
-		if (netif_msg_ifup(pegasus))
-			pr_debug("%s: can't enable_net_traffic() - %d\n",
-					net->name, res);
-		res = -EIO;
-		usb_kill_urb(pegasus->rx_urb);
-		usb_kill_urb(pegasus->intr_urb);
-		free_skb_pool(pegasus);
-		goto exit;
-	}
-	set_carrier(net);
-	netif_start_queue(net);
-	if (netif_msg_ifup(pegasus))
-		pr_debug("%s: open\n", net->name);
-	res = 0;
-exit:
-	return res;
-}
-
-static int pegasus_close(struct net_device *net)
-{
-	pegasus_t *pegasus = netdev_priv(net);
-
-	netif_stop_queue(net);
-	if (!(pegasus->flags & PEGASUS_UNPLUG))
-		disable_net_traffic(pegasus);
-	tasklet_kill(&pegasus->rx_tl);
-	unlink_all_urbs(pegasus);
-
-	return 0;
-}
-
-static void pegasus_get_drvinfo(struct net_device *dev,
-				struct ethtool_drvinfo *info)
-{
-	pegasus_t *pegasus = netdev_priv(dev);
-	strncpy(info->driver, driver_name, sizeof (info->driver) - 1);
-	strncpy(info->version, DRIVER_VERSION, sizeof (info->version) - 1);
-	usb_make_path(pegasus->usb, info->bus_info, sizeof (info->bus_info));
-}
-
-/* also handles three patterns of some kind in hardware */
-#define	WOL_SUPPORTED	(WAKE_MAGIC|WAKE_PHY)
-
-static void
-pegasus_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
-{
-	pegasus_t	*pegasus = netdev_priv(dev);
-
-	wol->supported = WAKE_MAGIC | WAKE_PHY;
-	wol->wolopts = pegasus->wolopts;
-}
-
-static int
-pegasus_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
-{
-	pegasus_t	*pegasus = netdev_priv(dev);
-	u8		reg78 = 0x04;
-	
-	if (wol->wolopts & ~WOL_SUPPORTED)
-		return -EINVAL;
-
-	if (wol->wolopts & WAKE_MAGIC)
-		reg78 |= 0x80;
-	if (wol->wolopts & WAKE_PHY)
-		reg78 |= 0x40;
-	/* FIXME this 0x10 bit still needs to get set in the chip... */
-	if (wol->wolopts)
-		pegasus->eth_regs[0] |= 0x10;
-	else
-		pegasus->eth_regs[0] &= ~0x10;
-	pegasus->wolopts = wol->wolopts;
-	return set_register(pegasus, WakeupControl, reg78);
-}
-
-static inline void pegasus_reset_wol(struct net_device *dev)
-{
-	struct ethtool_wolinfo wol;
-	
-	memset(&wol, 0, sizeof wol);
-	(void) pegasus_set_wol(dev, &wol);
-}
-
-static int
-pegasus_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
-{
-	pegasus_t *pegasus;
-
-	if (in_atomic())
-		return 0;
-
-	pegasus = netdev_priv(dev);
-	mii_ethtool_gset(&pegasus->mii, ecmd);
-
-	return 0;
-}
-
-static int
-pegasus_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
-{
-	pegasus_t *pegasus = netdev_priv(dev);
-	return mii_ethtool_sset(&pegasus->mii, ecmd);
-}
-
-static int pegasus_nway_reset(struct net_device *dev)
-{
-	pegasus_t *pegasus = netdev_priv(dev);
-	return mii_nway_restart(&pegasus->mii);
-}
-
-static u32 pegasus_get_link(struct net_device *dev)
-{
-	pegasus_t *pegasus = netdev_priv(dev);
-	return mii_link_ok(&pegasus->mii);
-}
-
-static u32 pegasus_get_msglevel(struct net_device *dev)
-{
-	pegasus_t *pegasus = netdev_priv(dev);
-	return pegasus->msg_enable;
-}
-
-static void pegasus_set_msglevel(struct net_device *dev, u32 v)
-{
-	pegasus_t *pegasus = netdev_priv(dev);
-	pegasus->msg_enable = v;
-}
-
-static struct ethtool_ops ops = {
-	.get_drvinfo = pegasus_get_drvinfo,
-	.get_settings = pegasus_get_settings,
-	.set_settings = pegasus_set_settings,
-	.nway_reset = pegasus_nway_reset,
-	.get_link = pegasus_get_link,
-	.get_msglevel = pegasus_get_msglevel,
-	.set_msglevel = pegasus_set_msglevel,
-	.get_wol = pegasus_get_wol,
-	.set_wol = pegasus_set_wol,
-};
-
-static int pegasus_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
-{
-	__u16 *data = (__u16 *) & rq->ifr_ifru;
-	pegasus_t *pegasus = netdev_priv(net);
-	int res;
-
-	switch (cmd) {
-	case SIOCDEVPRIVATE:
-		data[0] = pegasus->phy;
-	case SIOCDEVPRIVATE + 1:
-		read_mii_word(pegasus, data[0], data[1] & 0x1f, &data[3]);
-		res = 0;
-		break;
-	case SIOCDEVPRIVATE + 2:
-		if (!capable(CAP_NET_ADMIN))
-			return -EPERM;
-		write_mii_word(pegasus, pegasus->phy, data[1] & 0x1f, data[2]);
-		res = 0;
-		break;
-	default:
-		res = -EOPNOTSUPP;
-	}
-	return res;
-}
-
-static void pegasus_set_multicast(struct net_device *net)
-{
-	pegasus_t *pegasus = netdev_priv(net);
-
-	if (net->flags & IFF_PROMISC) {
-		pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS;
-		if (netif_msg_link(pegasus))
-			pr_info("%s: Promiscuous mode enabled.\n", net->name);
-	} else if (net->mc_count ||
-		   (net->flags & IFF_ALLMULTI)) {
-		pegasus->eth_regs[EthCtrl0] |= RX_MULTICAST;
-		pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
-		if (netif_msg_link(pegasus))
-			pr_info("%s: set allmulti\n", net->name);
-	} else {
-		pegasus->eth_regs[EthCtrl0] &= ~RX_MULTICAST;
-		pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
-	}
-
-	pegasus->flags |= ETH_REGS_CHANGE;
-	ctrl_callback(pegasus->ctrl_urb);
-}
-
-static __u8 mii_phy_probe(pegasus_t * pegasus)
-{
-	int i;
-	__u16 tmp;
-
-	for (i = 0; i < 32; i++) {
-		read_mii_word(pegasus, i, MII_BMSR, &tmp);
-		if (tmp == 0 || tmp == 0xffff || (tmp & BMSR_MEDIA) == 0)
-			continue;
-		else
-			return i;
-	}
-
-	return 0xff;
-}
-
-static inline void setup_pegasus_II(pegasus_t * pegasus)
-{
-	__u8 data = 0xa5;
-	
-	set_register(pegasus, Reg1d, 0);
-	set_register(pegasus, Reg7b, 1);
-	mdelay(100);
-	if ((pegasus->features & HAS_HOME_PNA) && mii_mode)
-		set_register(pegasus, Reg7b, 0);
-	else
-		set_register(pegasus, Reg7b, 2);
-
-	set_register(pegasus, 0x83, data);
-	get_registers(pegasus, 0x83, 1, &data);
-
-	if (data == 0xa5) {
-		pegasus->chip = 0x8513;
-	} else {
-		pegasus->chip = 0;
-	}
-
-	set_register(pegasus, 0x80, 0xc0);
-	set_register(pegasus, 0x83, 0xff);
-	set_register(pegasus, 0x84, 0x01);
-	
-	if (pegasus->features & HAS_HOME_PNA && mii_mode)
-		set_register(pegasus, Reg81, 6);
-	else
-		set_register(pegasus, Reg81, 2);
-}
-
-
-static struct workqueue_struct *pegasus_workqueue = NULL;
-#define CARRIER_CHECK_DELAY (2 * HZ)
-
-static void check_carrier(struct work_struct *work)
-{
-	pegasus_t *pegasus = container_of(work, pegasus_t, carrier_check.work);
-	set_carrier(pegasus->net);
-	if (!(pegasus->flags & PEGASUS_UNPLUG)) {
-		queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
-			CARRIER_CHECK_DELAY);
-	}
-}
-
-static int pegasus_probe(struct usb_interface *intf,
-			 const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct net_device *net;
-	pegasus_t *pegasus;
-	int dev_index = id - pegasus_ids;
-	int res = -ENOMEM;
-
-	usb_get_dev(dev);
-	net = alloc_etherdev(sizeof(struct pegasus));
-	if (!net) {
-		dev_err(&intf->dev, "can't allocate %s\n", "device");
-		goto out;
-	}
-
-	pegasus = netdev_priv(net);
-	memset(pegasus, 0, sizeof (struct pegasus));
-	pegasus->dev_index = dev_index;
-	init_waitqueue_head(&pegasus->ctrl_wait);
-
-	if (!alloc_urbs(pegasus)) {
-		dev_err(&intf->dev, "can't allocate %s\n", "urbs");
-		goto out1;
-	}
-
-	tasklet_init(&pegasus->rx_tl, rx_fixup, (unsigned long) pegasus);
-
-	INIT_DELAYED_WORK(&pegasus->carrier_check, check_carrier);
-
-	pegasus->intf = intf;
-	pegasus->usb = dev;
-	pegasus->net = net;
-	SET_MODULE_OWNER(net);
-	net->open = pegasus_open;
-	net->stop = pegasus_close;
-	net->watchdog_timeo = PEGASUS_TX_TIMEOUT;
-	net->tx_timeout = pegasus_tx_timeout;
-	net->do_ioctl = pegasus_ioctl;
-	net->hard_start_xmit = pegasus_start_xmit;
-	net->set_multicast_list = pegasus_set_multicast;
-	net->get_stats = pegasus_netdev_stats;
-	SET_ETHTOOL_OPS(net, &ops);
-	pegasus->mii.dev = net;
-	pegasus->mii.mdio_read = mdio_read;
-	pegasus->mii.mdio_write = mdio_write;
-	pegasus->mii.phy_id_mask = 0x1f;
-	pegasus->mii.reg_num_mask = 0x1f;
-	spin_lock_init(&pegasus->rx_pool_lock);
-	pegasus->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
-				| NETIF_MSG_PROBE | NETIF_MSG_LINK);
-
-	pegasus->features = usb_dev_id[dev_index].private;
-	get_interrupt_interval(pegasus);
-	if (reset_mac(pegasus)) {
-		dev_err(&intf->dev, "can't reset MAC\n");
-		res = -EIO;
-		goto out2;
-	}
-	set_ethernet_addr(pegasus);
-	fill_skb_pool(pegasus);
-	if (pegasus->features & PEGASUS_II) {
-		dev_info(&intf->dev, "setup Pegasus II specific registers\n");
-		setup_pegasus_II(pegasus);
-	}
-	pegasus->phy = mii_phy_probe(pegasus);
-	if (pegasus->phy == 0xff) {
-		dev_warn(&intf->dev, "can't locate MII phy, using default\n");
-		pegasus->phy = 1;
-	}
-	pegasus->mii.phy_id = pegasus->phy;
-	usb_set_intfdata(intf, pegasus);
-	SET_NETDEV_DEV(net, &intf->dev);
-	pegasus_reset_wol(net);
-	res = register_netdev(net);
-	if (res)
-		goto out3;
-	queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
-				CARRIER_CHECK_DELAY);
-
-	dev_info(&intf->dev, "%s, %s, %02x:%02x:%02x:%02x:%02x:%02x\n",
-		net->name,
-		usb_dev_id[dev_index].name,
-		net->dev_addr [0], net->dev_addr [1],
-		net->dev_addr [2], net->dev_addr [3],
-		net->dev_addr [4], net->dev_addr [5]);
-	return 0;
-
-out3:
-	usb_set_intfdata(intf, NULL);
-	free_skb_pool(pegasus);
-out2:
-	free_all_urbs(pegasus);
-out1:
-	free_netdev(net);
-out:
-	usb_put_dev(dev);
-	return res;
-}
-
-static void pegasus_disconnect(struct usb_interface *intf)
-{
-	struct pegasus *pegasus = usb_get_intfdata(intf);
-
-	usb_set_intfdata(intf, NULL);
-	if (!pegasus) {
-		dev_dbg(&intf->dev, "unregistering non-bound device?\n");
-		return;
-	}
-
-	pegasus->flags |= PEGASUS_UNPLUG;
-	cancel_delayed_work(&pegasus->carrier_check);
-	unregister_netdev(pegasus->net);
-	usb_put_dev(interface_to_usbdev(intf));
-	unlink_all_urbs(pegasus);
-	free_all_urbs(pegasus);
-	free_skb_pool(pegasus);
-	if (pegasus->rx_skb != NULL) {
-		dev_kfree_skb(pegasus->rx_skb);
-		pegasus->rx_skb = NULL;
-	}
-	free_netdev(pegasus->net);
-}
-
-static int pegasus_suspend (struct usb_interface *intf, pm_message_t message)
-{
-	struct pegasus *pegasus = usb_get_intfdata(intf);
-	
-	netif_device_detach (pegasus->net);
-	cancel_delayed_work(&pegasus->carrier_check);
-	if (netif_running(pegasus->net)) {
-		usb_kill_urb(pegasus->rx_urb);
-		usb_kill_urb(pegasus->intr_urb);
-	}
-	return 0;
-}
-
-static int pegasus_resume (struct usb_interface *intf)
-{
-	struct pegasus *pegasus = usb_get_intfdata(intf);
-
-	netif_device_attach (pegasus->net);
-	if (netif_running(pegasus->net)) {
-		pegasus->rx_urb->status = 0;
-		pegasus->rx_urb->actual_length = 0;
-		read_bulk_callback(pegasus->rx_urb);
-
-		pegasus->intr_urb->status = 0;
-		pegasus->intr_urb->actual_length = 0;
-		intr_callback(pegasus->intr_urb);
-	}
-	queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
-				CARRIER_CHECK_DELAY);
-	return 0;
-}
-
-static struct usb_driver pegasus_driver = {
-	.name = driver_name,
-	.probe = pegasus_probe,
-	.disconnect = pegasus_disconnect,
-	.id_table = pegasus_ids,
-	.suspend = pegasus_suspend,
-	.resume = pegasus_resume,
-};
-
-static void parse_id(char *id)
-{
-	unsigned int vendor_id=0, device_id=0, flags=0, i=0;
-	char *token, *name=NULL;
-
-	if ((token = strsep(&id, ":")) != NULL)
-		name = token;
-	/* name now points to a null terminated string*/
-	if ((token = strsep(&id, ":")) != NULL)
-		vendor_id = simple_strtoul(token, NULL, 16);
-	if ((token = strsep(&id, ":")) != NULL)
-		device_id = simple_strtoul(token, NULL, 16);
-	flags = simple_strtoul(id, NULL, 16);
-	pr_info("%s: new device %s, vendor ID 0x%04x, device ID 0x%04x, flags: 0x%x\n",
-	        driver_name, name, vendor_id, device_id, flags);
-
-	if (vendor_id > 0x10000 || vendor_id == 0)
-		return;
-	if (device_id > 0x10000 || device_id == 0)
-		return;
-
-	for (i=0; usb_dev_id[i].name; i++);
-	usb_dev_id[i].name = name;
-	usb_dev_id[i].vendor = vendor_id;
-	usb_dev_id[i].device = device_id;
-	usb_dev_id[i].private = flags;
-	pegasus_ids[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
-	pegasus_ids[i].idVendor = vendor_id;
-	pegasus_ids[i].idProduct = device_id;
-}
-
-static int __init pegasus_init(void)
-{
-	pr_info("%s: %s, " DRIVER_DESC "\n", driver_name, DRIVER_VERSION);
-	if (devid)
-		parse_id(devid);
-	pegasus_workqueue = create_singlethread_workqueue("pegasus");
-	if (!pegasus_workqueue)
-		return -ENOMEM;
-	return usb_register(&pegasus_driver);
-}
-
-static void __exit pegasus_exit(void)
-{
-	destroy_workqueue(pegasus_workqueue);
-	usb_deregister(&pegasus_driver);
-}
-
-module_init(pegasus_init);
-module_exit(pegasus_exit);
diff --git a/drivers/usb/net/pegasus.h b/drivers/usb/net/pegasus.h
deleted file mode 100644
index c7467823cd1..00000000000
--- a/drivers/usb/net/pegasus.h
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * Copyright (c) 1999-2003 Petko Manolov - Petkan (petkan@users.sourceforge.net)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-
-#ifndef	PEGASUS_DEV
-
-#define	PEGASUS_II		0x80000000
-#define	HAS_HOME_PNA		0x40000000
-
-#define	PEGASUS_MTU		1536
-#define	RX_SKBS			4
-
-#define	EPROM_WRITE		0x01
-#define	EPROM_READ		0x02
-#define	EPROM_DONE		0x04
-#define	EPROM_WR_ENABLE		0x10
-#define	EPROM_LOAD		0x20
-
-#define	PHY_DONE		0x80
-#define	PHY_READ		0x40
-#define	PHY_WRITE		0x20
-#define	DEFAULT_GPIO_RESET	0x24
-#define	DEFAULT_GPIO_SET	0x26
-
-#define	PEGASUS_PRESENT		0x00000001
-#define	PEGASUS_TX_BUSY		0x00000004
-#define	PEGASUS_RX_BUSY		0x00000008
-#define	CTRL_URB_RUNNING	0x00000010
-#define	CTRL_URB_SLEEP		0x00000020
-#define	PEGASUS_UNPLUG		0x00000040
-#define	PEGASUS_RX_URB_FAIL	0x00000080
-#define	ETH_REGS_CHANGE		0x40000000
-#define	ETH_REGS_CHANGED	0x80000000
-
-#define	RX_MULTICAST		2
-#define	RX_PROMISCUOUS		4
-
-#define	REG_TIMEOUT		(HZ)
-#define	PEGASUS_TX_TIMEOUT	(HZ*10)
-
-#define	TX_UNDERRUN		0x80
-#define	EXCESSIVE_COL		0x40
-#define	LATE_COL		0x20
-#define	NO_CARRIER		0x10
-#define	LOSS_CARRIER		0x08
-#define	JABBER_TIMEOUT		0x04
-
-#define	LINK_STATUS		0x01
-
-#define	PEGASUS_REQT_READ	0xc0
-#define	PEGASUS_REQT_WRITE	0x40
-#define	PEGASUS_REQ_GET_REGS	0xf0
-#define	PEGASUS_REQ_SET_REGS	0xf1
-#define	PEGASUS_REQ_SET_REG	PEGASUS_REQ_SET_REGS
-
-enum pegasus_registers {
-	EthCtrl0 = 0,
-	EthCtrl1 = 1,
-	EthCtrl2 = 2,
-	EthID = 0x10,
-	Reg1d = 0x1d,
-	EpromOffset = 0x20,
-	EpromData = 0x21,	/* 0x21 low, 0x22 high byte */
-	EpromCtrl = 0x23,
-	PhyAddr = 0x25,
-	PhyData = 0x26, 	/* 0x26 low, 0x27 high byte */
-	PhyCtrl = 0x28,
-	UsbStst = 0x2a,
-	EthTxStat0 = 0x2b,
-	EthTxStat1 = 0x2c,
-	EthRxStat = 0x2d,
-	WakeupControl = 0x78,
-	Reg7b = 0x7b,
-	Gpio0 = 0x7e,
-	Gpio1 = 0x7f,
-	Reg81 = 0x81,
-};
-
-
-typedef struct pegasus {
-	struct usb_device	*usb;
-	struct usb_interface	*intf;
-	struct net_device	*net;
-	struct net_device_stats	stats;
-	struct mii_if_info	mii;
-	unsigned		flags;
-	unsigned		features;
-	u32			msg_enable;
-	u32			wolopts;
-	int			dev_index;
-	int			intr_interval;
-	struct tasklet_struct	rx_tl;
-	struct delayed_work	carrier_check;
-	struct urb		*ctrl_urb, *rx_urb, *tx_urb, *intr_urb;
-	struct sk_buff		*rx_pool[RX_SKBS];
-	struct sk_buff		*rx_skb;
-	struct usb_ctrlrequest	dr;
-	wait_queue_head_t	ctrl_wait;
-	spinlock_t		rx_pool_lock;
-	int			chip;
-	unsigned char		intr_buff[8];
-	__u8			tx_buff[PEGASUS_MTU];
-	__u8			eth_regs[4];
-	__u8			phy;
-	__u8			gpio_res;
-} pegasus_t;
-
-
-struct usb_eth_dev {
-	char	*name;
-	__u16	vendor;
-	__u16	device;
-	__u32	private; /* LSB is gpio reset value */
-};
-
-#define	VENDOR_3COM		0x0506
-#define	VENDOR_ABOCOM		0x07b8
-#define	VENDOR_ACCTON		0x083a
-#define	VENDOR_ADMTEK		0x07a6
-#define	VENDOR_AEILAB		0x3334
-#define	VENDOR_ALLIEDTEL	0x07c9
-#define	VENDOR_ATEN		0x0557
-#define	VENDOR_BELKIN		0x050d
-#define	VENDOR_BILLIONTON	0x08dd
-#define	VENDOR_COMPAQ		0x049f
-#define	VENDOR_COREGA		0x07aa
-#define	VENDOR_DLINK		0x2001
-#define	VENDOR_ELCON		0x0db7
-#define	VENDOR_ELECOM		0x056e
-#define	VENDOR_ELSA		0x05cc
-#define	VENDOR_GIGABYTE		0x1044
-#define	VENDOR_HAWKING		0x0e66
-#define	VENDOR_HP		0x03f0
-#define	VENDOR_IODATA		0x04bb
-#define	VENDOR_KINGSTON		0x0951
-#define	VENDOR_LANEED		0x056e
-#define	VENDOR_LINKSYS		0x066b
-#define	VENDOR_LINKSYS2		0x077b
-#define	VENDOR_MELCO		0x0411
-#define	VENDOR_MICROSOFT	0x045e
-#define	VENDOR_MOBILITY		0x1342
-#define	VENDOR_NETGEAR		0x0846
-#define	VENDOR_OCT		0x0b39
-#define	VENDOR_SMARTBRIDGES	0x08d1
-#define	VENDOR_SMC		0x0707
-#define	VENDOR_SOHOWARE		0x15e8
-#define	VENDOR_SIEMENS		0x067c
-
-
-#else	/* PEGASUS_DEV */
-
-PEGASUS_DEV( "3Com USB Ethernet 3C460B", VENDOR_3COM, 0x4601,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "ATEN USB Ethernet UC-110T", VENDOR_ATEN, 0x2007,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x110c,
-		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
-PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4104,
-		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
-PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4004,
-		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
-PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4007,
-		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
-PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4102,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4002,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400b,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c,
-		DEFAULT_GPIO_RESET | PEGASUS_II ) 	
-PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
-		VENDOR_ADMTEK, 0x8511,
-		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
-PEGASUS_DEV( "ADMtek ADM8513 \"Pegasus II\" USB Ethernet",
-		VENDOR_ADMTEK, 0x8513,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "ADMtek ADM8515 \"Pegasus II\" USB-2.0 Ethernet",
-		VENDOR_ADMTEK, 0x8515,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "ADMtek AN986 \"Pegasus\" USB Ethernet (evaluation board)",
-		VENDOR_ADMTEK, 0x0986,
-		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
-PEGASUS_DEV( "AN986A USB MAC", VENDOR_ADMTEK, 1986,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987,
-		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
-PEGASUS_DEV( "iPAQ Networking 10/100 USB", VENDOR_COMPAQ, 0x8511,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "Billionton USBEL-100", VENDOR_BILLIONTON, 0x0988,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "Billionton USBE-100", VENDOR_BILLIONTON, 0x8511,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "Corega FEther USB-TX", VENDOR_COREGA, 0x0004,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "Corega FEther USB-TXS", VENDOR_COREGA, 0x000d,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4001,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4002,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4102,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x400b,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x200c,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003,
-		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
-PEGASUS_DEV( "D-Link DSB-650", VENDOR_DLINK, 0xabc1,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002,
-		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
-PEGASUS_DEV( "ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM,  0x4010,
-		DEFAULT_GPIO_RESET  | PEGASUS_II )
-PEGASUS_DEV( "EasiDock Ethernet", VENDOR_MOBILITY, 0x0304,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "HP hn210c Ethernet USB", VENDOR_HP, 0x811c,
-		DEFAULT_GPIO_RESET | PEGASUS_II )	
-PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a,
-		DEFAULT_GPIO_RESET)
-PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "LANEED USB Ethernet LD-USBL/TX", VENDOR_LANEED, 0x4005,
-		DEFAULT_GPIO_RESET | PEGASUS_II)
-PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x400b,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x2202,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2203,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2204,
-		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
-PEGASUS_DEV( "Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206,
-		DEFAULT_GPIO_RESET | PEGASUS_II)
-PEGASUS_DEV( "Linksys USBVPN1", VENDOR_LINKSYS2, 0x08b4,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x200c,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "MELCO/BUFFALO LUA2-TX", VENDOR_MELCO, 0x0009,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "Microsoft MN-110", VENDOR_MICROSOFT, 0x007a,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "NETGEAR FA101", VENDOR_NETGEAR, 0x1020,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "OCT Inc.", VENDOR_OCT, 0x0109,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "OCT USB TO Ethernet", VENDOR_OCT, 0x0901,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "smartNIC 2 PnP Adapter", VENDOR_SMARTBRIDGES, 0x0003,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "SMC 202 USB Ethernet", VENDOR_SMC, 0x0200,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "SMC 2206 USB Ethernet", VENDOR_SMC, 0x0201,
-		DEFAULT_GPIO_RESET | PEGASUS_II)
-PEGASUS_DEV( "SOHOware NUB100 Ethernet", VENDOR_SOHOWARE, 0x9100,
-		DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001,
-		DEFAULT_GPIO_RESET | PEGASUS_II )
-
-
-#endif	/* PEGASUS_DEV */
diff --git a/drivers/usb/net/plusb.c b/drivers/usb/net/plusb.c
deleted file mode 100644
index 45300939d18..00000000000
--- a/drivers/usb/net/plusb.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * PL-2301/2302 USB host-to-host link cables
- * Copyright (C) 2000-2005 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-// #define	DEBUG			// error path messages, extra info
-// #define	VERBOSE			// more; success messages
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/workqueue.h>
-#include <linux/mii.h>
-#include <linux/usb.h>
-
-#include "usbnet.h"
-
-
-/*
- * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com
- *
- * The protocol and handshaking used here should be bug-compatible
- * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
- *
- * HEADS UP:  this handshaking isn't all that robust.  This driver
- * gets confused easily if you unplug one end of the cable then
- * try to connect it again; you'll need to restart both ends. The
- * "naplink" software (used by some PlayStation/2 deveopers) does
- * the handshaking much better!   Also, sometimes this hardware
- * seems to get wedged under load.  Prolific docs are weak, and
- * don't identify differences between PL2301 and PL2302, much less
- * anything to explain the different PL2302 versions observed.
- */
-
-/*
- * Bits 0-4 can be used for software handshaking; they're set from
- * one end, cleared from the other, "read" with the interrupt byte.
- */
-#define	PL_S_EN		(1<<7)		/* (feature only) suspend enable */
-/* reserved bit -- rx ready (6) ? */
-#define	PL_TX_READY	(1<<5)		/* (interrupt only) transmit ready */
-#define	PL_RESET_OUT	(1<<4)		/* reset output pipe */
-#define	PL_RESET_IN	(1<<3)		/* reset input pipe */
-#define	PL_TX_C		(1<<2)		/* transmission complete */
-#define	PL_TX_REQ	(1<<1)		/* transmission received */
-#define	PL_PEER_E	(1<<0)		/* peer exists */
-
-static inline int
-pl_vendor_req(struct usbnet *dev, u8 req, u8 val, u8 index)
-{
-	return usb_control_msg(dev->udev,
-		usb_rcvctrlpipe(dev->udev, 0),
-		req,
-		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-		val, index,
-		NULL, 0,
-		USB_CTRL_GET_TIMEOUT);
-}
-
-static inline int
-pl_clear_QuickLink_features(struct usbnet *dev, int val)
-{
-	return pl_vendor_req(dev, 1, (u8) val, 0);
-}
-
-static inline int
-pl_set_QuickLink_features(struct usbnet *dev, int val)
-{
-	return pl_vendor_req(dev, 3, (u8) val, 0);
-}
-
-static int pl_reset(struct usbnet *dev)
-{
-	/* some units seem to need this reset, others reject it utterly.
-	 * FIXME be more like "naplink" or windows drivers.
-	 */
-	(void) pl_set_QuickLink_features(dev,
-		PL_S_EN|PL_RESET_OUT|PL_RESET_IN|PL_PEER_E);
-	return 0;
-}
-
-static const struct driver_info	prolific_info = {
-	.description =	"Prolific PL-2301/PL-2302",
-	.flags =	FLAG_NO_SETINT,
-		/* some PL-2302 versions seem to fail usb_set_interface() */
-	.reset =	pl_reset,
-};
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Proilific's name won't normally be on the cables, and
- * may not be on the device.
- */
-
-static const struct usb_device_id	products [] = {
-
-{
-	USB_DEVICE(0x067b, 0x0000),	// PL-2301
-	.driver_info =	(unsigned long) &prolific_info,
-}, {
-	USB_DEVICE(0x067b, 0x0001),	// PL-2302
-	.driver_info =	(unsigned long) &prolific_info,
-},
-
-	{ },		// END
-};
-MODULE_DEVICE_TABLE(usb, products);
-
-static struct usb_driver plusb_driver = {
-	.name =		"plusb",
-	.id_table =	products,
-	.probe =	usbnet_probe,
-	.disconnect =	usbnet_disconnect,
-	.suspend =	usbnet_suspend,
-	.resume =	usbnet_resume,
-};
-
-static int __init plusb_init(void)
-{
- 	return usb_register(&plusb_driver);
-}
-module_init(plusb_init);
-
-static void __exit plusb_exit(void)
-{
- 	usb_deregister(&plusb_driver);
-}
-module_exit(plusb_exit);
-
-MODULE_AUTHOR("David Brownell");
-MODULE_DESCRIPTION("Prolific PL-2301/2302 USB Host to Host Link Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c
deleted file mode 100644
index 980e4aaa97a..00000000000
--- a/drivers/usb/net/rndis_host.c
+++ /dev/null
@@ -1,727 +0,0 @@
-/*
- * Host Side support for RNDIS Networking Links
- * Copyright (C) 2005 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-// #define	DEBUG			// error path messages, extra info
-// #define	VERBOSE			// more; success messages
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/workqueue.h>
-#include <linux/mii.h>
-#include <linux/usb.h>
-#include <linux/usb/cdc.h>
-
-#include "usbnet.h"
-
-
-/*
- * RNDIS is NDIS remoted over USB.  It's a MSFT variant of CDC ACM ... of
- * course ACM was intended for modems, not Ethernet links!  USB's standard
- * for Ethernet links is "CDC Ethernet", which is significantly simpler.
- *
- * NOTE that Microsoft's "RNDIS 1.0" specification is incomplete.  Issues
- * include:
- *    - Power management in particular relies on information that's scattered
- *	through other documentation, and which is incomplete or incorrect even
- *	there.
- *    - There are various undocumented protocol requirements, such as the
- *	need to send unused garbage in control-OUT messages.
- *    - In some cases, MS-Windows will emit undocumented requests; this
- *	matters more to peripheral implementations than host ones.
- *
- * Moreover there's a no-open-specs variant of RNDIS called "ActiveSync".
- *
- * For these reasons and others, ** USE OF RNDIS IS STRONGLY DISCOURAGED ** in
- * favor of such non-proprietary alternatives as CDC Ethernet or the newer (and
- * currently rare) "Ethernet Emulation Model" (EEM).
- */
-
-/*
- * CONTROL uses CDC "encapsulated commands" with funky notifications.
- *  - control-out:  SEND_ENCAPSULATED
- *  - interrupt-in:  RESPONSE_AVAILABLE
- *  - control-in:  GET_ENCAPSULATED
- *
- * We'll try to ignore the RESPONSE_AVAILABLE notifications.
- *
- * REVISIT some RNDIS implementations seem to have curious issues still
- * to be resolved.
- */
-struct rndis_msg_hdr {
-	__le32	msg_type;			/* RNDIS_MSG_* */
-	__le32	msg_len;
-	// followed by data that varies between messages
-	__le32	request_id;
-	__le32	status;
-	// ... and more
-} __attribute__ ((packed));
-
-/* MS-Windows uses this strange size, but RNDIS spec says 1024 minimum */
-#define	CONTROL_BUFFER_SIZE		1025
-
-/* RNDIS defines an (absurdly huge) 10 second control timeout,
- * but ActiveSync seems to use a more usual 5 second timeout
- * (which matches the USB 2.0 spec).
- */
-#define	RNDIS_CONTROL_TIMEOUT_MS	(5 * 1000)
-
-
-#define ccpu2 __constant_cpu_to_le32
-
-#define RNDIS_MSG_COMPLETION	ccpu2(0x80000000)
-
-/* codes for "msg_type" field of rndis messages;
- * only the data channel uses packet messages (maybe batched);
- * everything else goes on the control channel.
- */
-#define RNDIS_MSG_PACKET	ccpu2(0x00000001)	/* 1-N packets */
-#define RNDIS_MSG_INIT		ccpu2(0x00000002)
-#define RNDIS_MSG_INIT_C	(RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
-#define RNDIS_MSG_HALT		ccpu2(0x00000003)
-#define RNDIS_MSG_QUERY		ccpu2(0x00000004)
-#define RNDIS_MSG_QUERY_C	(RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
-#define RNDIS_MSG_SET		ccpu2(0x00000005)
-#define RNDIS_MSG_SET_C		(RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
-#define RNDIS_MSG_RESET		ccpu2(0x00000006)
-#define RNDIS_MSG_RESET_C	(RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
-#define RNDIS_MSG_INDICATE	ccpu2(0x00000007)
-#define RNDIS_MSG_KEEPALIVE	ccpu2(0x00000008)
-#define RNDIS_MSG_KEEPALIVE_C	(RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
-
-/* codes for "status" field of completion messages */
-#define	RNDIS_STATUS_SUCCESS		ccpu2(0x00000000)
-#define	RNDIS_STATUS_FAILURE		ccpu2(0xc0000001)
-#define	RNDIS_STATUS_INVALID_DATA	ccpu2(0xc0010015)
-#define	RNDIS_STATUS_NOT_SUPPORTED	ccpu2(0xc00000bb)
-#define	RNDIS_STATUS_MEDIA_CONNECT	ccpu2(0x4001000b)
-#define	RNDIS_STATUS_MEDIA_DISCONNECT	ccpu2(0x4001000c)
-
-
-struct rndis_data_hdr {
-	__le32	msg_type;		/* RNDIS_MSG_PACKET */
-	__le32	msg_len;		// rndis_data_hdr + data_len + pad
-	__le32	data_offset;		// 36 -- right after header
-	__le32	data_len;		// ... real packet size
-
-	__le32	oob_data_offset;	// zero
-	__le32	oob_data_len;		// zero
-	__le32	num_oob;		// zero
-	__le32	packet_data_offset;	// zero
-
-	__le32	packet_data_len;	// zero
-	__le32	vc_handle;		// zero
-	__le32	reserved;		// zero
-} __attribute__ ((packed));
-
-struct rndis_init {		/* OUT */
-	// header and:
-	__le32	msg_type;			/* RNDIS_MSG_INIT */
-	__le32	msg_len;			// 24
-	__le32	request_id;
-	__le32	major_version;			// of rndis (1.0)
-	__le32	minor_version;
-	__le32	max_transfer_size;
-} __attribute__ ((packed));
-
-struct rndis_init_c {		/* IN */
-	// header and:
-	__le32	msg_type;			/* RNDIS_MSG_INIT_C */
-	__le32	msg_len;
-	__le32	request_id;
-	__le32	status;
-	__le32	major_version;			// of rndis (1.0)
-	__le32	minor_version;
-	__le32	device_flags;
-	__le32	medium;				// zero == 802.3
-	__le32	max_packets_per_message;
-	__le32	max_transfer_size;
-	__le32	packet_alignment;		// max 7; (1<<n) bytes
-	__le32	af_list_offset;			// zero
-	__le32	af_list_size;			// zero
-} __attribute__ ((packed));
-
-struct rndis_halt {		/* OUT (no reply) */
-	// header and:
-	__le32	msg_type;			/* RNDIS_MSG_HALT */
-	__le32	msg_len;
-	__le32	request_id;
-} __attribute__ ((packed));
-
-struct rndis_query {		/* OUT */
-	// header and:
-	__le32	msg_type;			/* RNDIS_MSG_QUERY */
-	__le32	msg_len;
-	__le32	request_id;
-	__le32	oid;
-	__le32	len;
-	__le32	offset;
-/*?*/	__le32	handle;				// zero
-} __attribute__ ((packed));
-
-struct rndis_query_c {		/* IN */
-	// header and:
-	__le32	msg_type;			/* RNDIS_MSG_QUERY_C */
-	__le32	msg_len;
-	__le32	request_id;
-	__le32	status;
-	__le32	len;
-	__le32	offset;
-} __attribute__ ((packed));
-
-struct rndis_set {		/* OUT */
-	// header and:
-	__le32	msg_type;			/* RNDIS_MSG_SET */
-	__le32	msg_len;
-	__le32	request_id;
-	__le32	oid;
-	__le32	len;
-	__le32	offset;
-/*?*/	__le32	handle;				// zero
-} __attribute__ ((packed));
-
-struct rndis_set_c {		/* IN */
-	// header and:
-	__le32	msg_type;			/* RNDIS_MSG_SET_C */
-	__le32	msg_len;
-	__le32	request_id;
-	__le32	status;
-} __attribute__ ((packed));
-
-struct rndis_reset {		/* IN */
-	// header and:
-	__le32	msg_type;			/* RNDIS_MSG_RESET */
-	__le32	msg_len;
-	__le32	reserved;
-} __attribute__ ((packed));
-
-struct rndis_reset_c {		/* OUT */
-	// header and:
-	__le32	msg_type;			/* RNDIS_MSG_RESET_C */
-	__le32	msg_len;
-	__le32	status;
-	__le32	addressing_lost;
-} __attribute__ ((packed));
-
-struct rndis_indicate {		/* IN (unrequested) */
-	// header and:
-	__le32	msg_type;			/* RNDIS_MSG_INDICATE */
-	__le32	msg_len;
-	__le32	status;
-	__le32	length;
-	__le32	offset;
-/**/	__le32	diag_status;
-	__le32	error_offset;
-/**/	__le32	message;
-} __attribute__ ((packed));
-
-struct rndis_keepalive {	/* OUT (optionally IN) */
-	// header and:
-	__le32	msg_type;			/* RNDIS_MSG_KEEPALIVE */
-	__le32	msg_len;
-	__le32	request_id;
-} __attribute__ ((packed));
-
-struct rndis_keepalive_c {	/* IN (optionally OUT) */
-	// header and:
-	__le32	msg_type;			/* RNDIS_MSG_KEEPALIVE_C */
-	__le32	msg_len;
-	__le32	request_id;
-	__le32	status;
-} __attribute__ ((packed));
-
-/* NOTE:  about 30 OIDs are "mandatory" for peripherals to support ... and
- * there are gobs more that may optionally be supported.  We'll avoid as much
- * of that mess as possible.
- */
-#define OID_802_3_PERMANENT_ADDRESS	ccpu2(0x01010101)
-#define OID_GEN_MAXIMUM_FRAME_SIZE	ccpu2(0x00010106)
-#define OID_GEN_CURRENT_PACKET_FILTER	ccpu2(0x0001010e)
-
-/*
- * RNDIS notifications from device: command completion; "reverse"
- * keepalives; etc
- */
-static void rndis_status(struct usbnet *dev, struct urb *urb)
-{
-	devdbg(dev, "rndis status urb, len %d stat %d",
-		urb->actual_length, urb->status);
-	// FIXME for keepalives, respond immediately (asynchronously)
-	// if not an RNDIS status, do like cdc_status(dev,urb) does
-}
-
-/*
- * RPC done RNDIS-style.  Caller guarantees:
- * - message is properly byteswapped
- * - there's no other request pending
- * - buf can hold up to 1KB response (required by RNDIS spec)
- * On return, the first few entries are already byteswapped.
- *
- * Call context is likely probe(), before interface name is known,
- * which is why we won't try to use it in the diagnostics.
- */
-static int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf)
-{
-	struct cdc_state	*info = (void *) &dev->data;
-	int			master_ifnum;
-	int			retval;
-	unsigned		count;
-	__le32			rsp;
-	u32			xid = 0, msg_len, request_id;
-
-	/* REVISIT when this gets called from contexts other than probe() or
-	 * disconnect(): either serialize, or dispatch responses on xid
-	 */
-
-	/* Issue the request; xid is unique, don't bother byteswapping it */
-	if (likely(buf->msg_type != RNDIS_MSG_HALT
-			&& buf->msg_type != RNDIS_MSG_RESET)) {
-		xid = dev->xid++;
-		if (!xid)
-			xid = dev->xid++;
-		buf->request_id = (__force __le32) xid;
-	}
-	master_ifnum = info->control->cur_altsetting->desc.bInterfaceNumber;
-	retval = usb_control_msg(dev->udev,
-		usb_sndctrlpipe(dev->udev, 0),
-		USB_CDC_SEND_ENCAPSULATED_COMMAND,
-		USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-		0, master_ifnum,
-		buf, le32_to_cpu(buf->msg_len),
-		RNDIS_CONTROL_TIMEOUT_MS);
-	if (unlikely(retval < 0 || xid == 0))
-		return retval;
-
-	// FIXME Seems like some devices discard responses when
-	// we time out and cancel our "get response" requests...
-	// so, this is fragile.  Probably need to poll for status.
-
-	/* ignore status endpoint, just poll the control channel;
-	 * the request probably completed immediately
-	 */
-	rsp = buf->msg_type | RNDIS_MSG_COMPLETION;
-	for (count = 0; count < 10; count++) {
-		memset(buf, 0, CONTROL_BUFFER_SIZE);
-		retval = usb_control_msg(dev->udev,
-			usb_rcvctrlpipe(dev->udev, 0),
-			USB_CDC_GET_ENCAPSULATED_RESPONSE,
-			USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-			0, master_ifnum,
-			buf, CONTROL_BUFFER_SIZE,
-			RNDIS_CONTROL_TIMEOUT_MS);
-		if (likely(retval >= 8)) {
-			msg_len = le32_to_cpu(buf->msg_len);
-			request_id = (__force u32) buf->request_id;
-			if (likely(buf->msg_type == rsp)) {
-				if (likely(request_id == xid)) {
-					if (unlikely(rsp == RNDIS_MSG_RESET_C))
-						return 0;
-					if (likely(RNDIS_STATUS_SUCCESS
-							== buf->status))
-						return 0;
-					dev_dbg(&info->control->dev,
-						"rndis reply status %08x\n",
-						le32_to_cpu(buf->status));
-					return -EL3RST;
-				}
-				dev_dbg(&info->control->dev,
-					"rndis reply id %d expected %d\n",
-					request_id, xid);
-				/* then likely retry */
-			} else switch (buf->msg_type) {
-			case RNDIS_MSG_INDICATE: {	/* fault */
-				// struct rndis_indicate *msg = (void *)buf;
-				dev_info(&info->control->dev,
-					"rndis fault indication\n");
-				}
-				break;
-			case RNDIS_MSG_KEEPALIVE: {	/* ping */
-				struct rndis_keepalive_c *msg = (void *)buf;
-
-				msg->msg_type = RNDIS_MSG_KEEPALIVE_C;
-				msg->msg_len = ccpu2(sizeof *msg);
-				msg->status = RNDIS_STATUS_SUCCESS;
-				retval = usb_control_msg(dev->udev,
-					usb_sndctrlpipe(dev->udev, 0),
-					USB_CDC_SEND_ENCAPSULATED_COMMAND,
-					USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-					0, master_ifnum,
-					msg, sizeof *msg,
-					RNDIS_CONTROL_TIMEOUT_MS);
-				if (unlikely(retval < 0))
-					dev_dbg(&info->control->dev,
-						"rndis keepalive err %d\n",
-						retval);
-				}
-				break;
-			default:
-				dev_dbg(&info->control->dev,
-					"unexpected rndis msg %08x len %d\n",
-					le32_to_cpu(buf->msg_type), msg_len);
-			}
-		} else {
-			/* device probably issued a protocol stall; ignore */
-			dev_dbg(&info->control->dev,
-				"rndis response error, code %d\n", retval);
-		}
-		msleep(2);
-	}
-	dev_dbg(&info->control->dev, "rndis response timeout\n");
-	return -ETIMEDOUT;
-}
-
-/*
- * rndis_query:
- *
- * Performs a query for @oid along with 0 or more bytes of payload as
- * specified by @in_len. If @reply_len is not set to -1 then the reply
- * length is checked against this value, resulting in an error if it
- * doesn't match.
- *
- * NOTE: Adding a payload exactly or greater than the size of the expected
- * response payload is an evident requirement MSFT added for ActiveSync.
- *
- * The only exception is for OIDs that return a variably sized response,
- * in which case no payload should be added.  This undocumented (and
- * nonsensical!) issue was found by sniffing protocol requests from the
- * ActiveSync 4.1 Windows driver.
- */
-static int rndis_query(struct usbnet *dev, struct usb_interface *intf,
-		void *buf, u32 oid, u32 in_len,
-		void **reply, int *reply_len)
-{
-	int retval;
-	union {
-		void			*buf;
-		struct rndis_msg_hdr	*header;
-		struct rndis_query	*get;
-		struct rndis_query_c	*get_c;
-	} u;
-	u32 off, len;
-
-	u.buf = buf;
-
-	memset(u.get, 0, sizeof *u.get + in_len);
-	u.get->msg_type = RNDIS_MSG_QUERY;
-	u.get->msg_len = cpu_to_le32(sizeof *u.get + in_len);
-	u.get->oid = oid;
-	u.get->len = cpu_to_le32(in_len);
-	u.get->offset = ccpu2(20);
-
-	retval = rndis_command(dev, u.header);
-	if (unlikely(retval < 0)) {
-		dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) failed, %d\n",
-				oid, retval);
-		return retval;
-	}
-
-	off = le32_to_cpu(u.get_c->offset);
-	len = le32_to_cpu(u.get_c->len);
-	if (unlikely((8 + off + len) > CONTROL_BUFFER_SIZE))
-		goto response_error;
-
-	if (*reply_len != -1 && len != *reply_len)
-		goto response_error;
-
-	*reply = (unsigned char *) &u.get_c->request_id + off;
-	*reply_len = len;
-
-	return retval;
-
-response_error:
-	dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) "
-			"invalid response - off %d len %d\n",
-		oid, off, len);
-	return -EDOM;
-}
-
-static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
-{
-	int			retval;
-	struct net_device	*net = dev->net;
-	struct cdc_state	*info = (void *) &dev->data;
-	union {
-		void			*buf;
-		struct rndis_msg_hdr	*header;
-		struct rndis_init	*init;
-		struct rndis_init_c	*init_c;
-		struct rndis_query	*get;
-		struct rndis_query_c	*get_c;
-		struct rndis_set	*set;
-		struct rndis_set_c	*set_c;
-	} u;
-	u32			tmp;
-	int			reply_len;
-	unsigned char		*bp;
-
-	/* we can't rely on i/o from stack working, or stack allocation */
-	u.buf = kmalloc(CONTROL_BUFFER_SIZE, GFP_KERNEL);
-	if (!u.buf)
-		return -ENOMEM;
-	retval = usbnet_generic_cdc_bind(dev, intf);
-	if (retval < 0)
-		goto fail;
-
-	u.init->msg_type = RNDIS_MSG_INIT;
-	u.init->msg_len = ccpu2(sizeof *u.init);
-	u.init->major_version = ccpu2(1);
-	u.init->minor_version = ccpu2(0);
-
-	/* max transfer (in spec) is 0x4000 at full speed, but for
-	 * TX we'll stick to one Ethernet packet plus RNDIS framing.
-	 * For RX we handle drivers that zero-pad to end-of-packet.
-	 * Don't let userspace change these settings.
-	 *
-	 * NOTE: there still seems to be wierdness here, as if we need
-	 * to do some more things to make sure WinCE targets accept this.
-	 * They default to jumbograms of 8KB or 16KB, which is absurd
-	 * for such low data rates and which is also more than Linux
-	 * can usually expect to allocate for SKB data...
-	 */
-	net->hard_header_len += sizeof (struct rndis_data_hdr);
-	dev->hard_mtu = net->mtu + net->hard_header_len;
-
-	dev->rx_urb_size = dev->hard_mtu + (dev->maxpacket + 1);
-	dev->rx_urb_size &= ~(dev->maxpacket - 1);
-	u.init->max_transfer_size = cpu_to_le32(dev->rx_urb_size);
-
-	net->change_mtu = NULL;
-	retval = rndis_command(dev, u.header);
-	if (unlikely(retval < 0)) {
-		/* it might not even be an RNDIS device!! */
-		dev_err(&intf->dev, "RNDIS init failed, %d\n", retval);
-		goto fail_and_release;
-	}
-	tmp = le32_to_cpu(u.init_c->max_transfer_size);
-	if (tmp < dev->hard_mtu) {
-		dev_err(&intf->dev,
-			"dev can't take %u byte packets (max %u)\n",
-			dev->hard_mtu, tmp);
-		goto fail_and_release;
-	}
-
-	/* REVISIT:  peripheral "alignment" request is ignored ... */
-	dev_dbg(&intf->dev,
-		"hard mtu %u (%u from dev), rx buflen %Zu, align %d\n",
-		dev->hard_mtu, tmp, dev->rx_urb_size,
-		1 << le32_to_cpu(u.init_c->packet_alignment));
-
-	/* Get designated host ethernet address */
-	reply_len = ETH_ALEN;
-	retval = rndis_query(dev, intf, u.buf, OID_802_3_PERMANENT_ADDRESS,
-			48, (void **) &bp, &reply_len);
-	if (unlikely(retval< 0)) {
-		dev_err(&intf->dev, "rndis get ethaddr, %d\n", retval);
-		goto fail_and_release;
-	}
-	memcpy(net->dev_addr, bp, ETH_ALEN);
-
-	/* set a nonzero filter to enable data transfers */
-	memset(u.set, 0, sizeof *u.set);
-	u.set->msg_type = RNDIS_MSG_SET;
-	u.set->msg_len = ccpu2(4 + sizeof *u.set);
-	u.set->oid = OID_GEN_CURRENT_PACKET_FILTER;
-	u.set->len = ccpu2(4);
-	u.set->offset = ccpu2((sizeof *u.set) - 8);
-	*(__le32 *)(u.buf + sizeof *u.set) = ccpu2(DEFAULT_FILTER);
-
-	retval = rndis_command(dev, u.header);
-	if (unlikely(retval < 0)) {
-		dev_err(&intf->dev, "rndis set packet filter, %d\n", retval);
-		goto fail_and_release;
-	}
-
-	retval = 0;
-
-	kfree(u.buf);
-	return retval;
-
-fail_and_release:
-	usb_set_intfdata(info->data, NULL);
-	usb_driver_release_interface(driver_of(intf), info->data);
-	info->data = NULL;
-fail:
-	kfree(u.buf);
-	return retval;
-}
-
-static void rndis_unbind(struct usbnet *dev, struct usb_interface *intf)
-{
-	struct rndis_halt	*halt;
-
-	/* try to clear any rndis state/activity (no i/o from stack!) */
-	halt = kzalloc(sizeof *halt, GFP_KERNEL);
-	if (halt) {
-		halt->msg_type = RNDIS_MSG_HALT;
-		halt->msg_len = ccpu2(sizeof *halt);
-		(void) rndis_command(dev, (void *)halt);
-		kfree(halt);
-	}
-
-	return usbnet_cdc_unbind(dev, intf);
-}
-
-/*
- * DATA -- host must not write zlps
- */
-static int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
-{
-	/* peripheral may have batched packets to us... */
-	while (likely(skb->len)) {
-		struct rndis_data_hdr	*hdr = (void *)skb->data;
-		struct sk_buff		*skb2;
-		u32			msg_len, data_offset, data_len;
-
-		msg_len = le32_to_cpu(hdr->msg_len);
-		data_offset = le32_to_cpu(hdr->data_offset);
-		data_len = le32_to_cpu(hdr->data_len);
-
-		/* don't choke if we see oob, per-packet data, etc */
-		if (unlikely(hdr->msg_type != RNDIS_MSG_PACKET
-				|| skb->len < msg_len
-				|| (data_offset + data_len + 8) > msg_len)) {
-			dev->stats.rx_frame_errors++;
-			devdbg(dev, "bad rndis message %d/%d/%d/%d, len %d",
-				le32_to_cpu(hdr->msg_type),
-				msg_len, data_offset, data_len, skb->len);
-			return 0;
-		}
-		skb_pull(skb, 8 + data_offset);
-
-		/* at most one packet left? */
-		if (likely((data_len - skb->len) <= sizeof *hdr)) {
-			skb_trim(skb, data_len);
-			break;
-		}
-
-		/* try to return all the packets in the batch */
-		skb2 = skb_clone(skb, GFP_ATOMIC);
-		if (unlikely(!skb2))
-			break;
-		skb_pull(skb, msg_len - sizeof *hdr);
-		skb_trim(skb2, data_len);
-		usbnet_skb_return(dev, skb2);
-	}
-
-	/* caller will usbnet_skb_return the remaining packet */
-	return 1;
-}
-
-static struct sk_buff *
-rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
-{
-	struct rndis_data_hdr	*hdr;
-	struct sk_buff		*skb2;
-	unsigned		len = skb->len;
-
-	if (likely(!skb_cloned(skb))) {
-		int	room = skb_headroom(skb);
-
-		/* enough head room as-is? */
-		if (unlikely((sizeof *hdr) <= room))
-			goto fill;
-
-		/* enough room, but needs to be readjusted? */
-		room += skb_tailroom(skb);
-		if (likely((sizeof *hdr) <= room)) {
-			skb->data = memmove(skb->head + sizeof *hdr,
-					    skb->data, len);
-			skb_set_tail_pointer(skb, len);
-			goto fill;
-		}
-	}
-
-	/* create a new skb, with the correct size (and tailpad) */
-	skb2 = skb_copy_expand(skb, sizeof *hdr, 1, flags);
-	dev_kfree_skb_any(skb);
-	if (unlikely(!skb2))
-		return skb2;
-	skb = skb2;
-
-	/* fill out the RNDIS header.  we won't bother trying to batch
-	 * packets; Linux minimizes wasted bandwidth through tx queues.
-	 */
-fill:
-	hdr = (void *) __skb_push(skb, sizeof *hdr);
-	memset(hdr, 0, sizeof *hdr);
-	hdr->msg_type = RNDIS_MSG_PACKET;
-	hdr->msg_len = cpu_to_le32(skb->len);
-	hdr->data_offset = ccpu2(sizeof(*hdr) - 8);
-	hdr->data_len = cpu_to_le32(len);
-
-	/* FIXME make the last packet always be short ... */
-	return skb;
-}
-
-
-static const struct driver_info	rndis_info = {
-	.description =	"RNDIS device",
-	.flags =	FLAG_ETHER | FLAG_FRAMING_RN | FLAG_NO_SETINT,
-	.bind =		rndis_bind,
-	.unbind =	rndis_unbind,
-	.status =	rndis_status,
-	.rx_fixup =	rndis_rx_fixup,
-	.tx_fixup =	rndis_tx_fixup,
-};
-
-#undef ccpu2
-
-
-/*-------------------------------------------------------------------------*/
-
-static const struct usb_device_id	products [] = {
-{
-	/* RNDIS is MSFT's un-official variant of CDC ACM */
-	USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
-	.driver_info = (unsigned long) &rndis_info,
-}, {
-	/* "ActiveSync" is an undocumented variant of RNDIS, used in WM5 */
-	USB_INTERFACE_INFO(USB_CLASS_MISC, 1, 1),
-	.driver_info = (unsigned long) &rndis_info,
-},
-	{ },		// END
-};
-MODULE_DEVICE_TABLE(usb, products);
-
-static struct usb_driver rndis_driver = {
-	.name =		"rndis_host",
-	.id_table =	products,
-	.probe =	usbnet_probe,
-	.disconnect =	usbnet_disconnect,
-	.suspend =	usbnet_suspend,
-	.resume =	usbnet_resume,
-};
-
-static int __init rndis_init(void)
-{
-	return usb_register(&rndis_driver);
-}
-module_init(rndis_init);
-
-static void __exit rndis_exit(void)
-{
-	usb_deregister(&rndis_driver);
-}
-module_exit(rndis_exit);
-
-MODULE_AUTHOR("David Brownell");
-MODULE_DESCRIPTION("USB Host side RNDIS driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c
deleted file mode 100644
index fa598f0340c..00000000000
--- a/drivers/usb/net/rtl8150.c
+++ /dev/null
@@ -1,1004 +0,0 @@
-/*
- *  Copyright (c) 2002 Petko Manolov (petkan@users.sourceforge.net)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/signal.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/usb.h>
-#include <asm/uaccess.h>
-
-/* Version Information */
-#define DRIVER_VERSION "v0.6.2 (2004/08/27)"
-#define DRIVER_AUTHOR "Petko Manolov <petkan@users.sourceforge.net>"
-#define DRIVER_DESC "rtl8150 based usb-ethernet driver"
-
-#define	IDR			0x0120
-#define	MAR			0x0126
-#define	CR			0x012e
-#define	TCR			0x012f
-#define	RCR			0x0130
-#define	TSR			0x0132
-#define	RSR			0x0133
-#define	CON0			0x0135
-#define	CON1			0x0136
-#define	MSR			0x0137
-#define	PHYADD			0x0138
-#define	PHYDAT			0x0139
-#define	PHYCNT			0x013b
-#define	GPPC			0x013d
-#define	BMCR			0x0140
-#define	BMSR			0x0142
-#define	ANAR			0x0144
-#define	ANLP			0x0146
-#define	AER			0x0148
-#define CSCR			0x014C  /* This one has the link status */
-#define CSCR_LINK_STATUS	(1 << 3)
-
-#define	IDR_EEPROM		0x1202
-
-#define	PHY_READ		0
-#define	PHY_WRITE		0x20
-#define	PHY_GO			0x40
-
-#define	MII_TIMEOUT		10
-#define	INTBUFSIZE		8
-
-#define	RTL8150_REQT_READ	0xc0
-#define	RTL8150_REQT_WRITE	0x40
-#define	RTL8150_REQ_GET_REGS	0x05
-#define	RTL8150_REQ_SET_REGS	0x05
-
-
-/* Transmit status register errors */
-#define TSR_ECOL		(1<<5)
-#define TSR_LCOL		(1<<4)
-#define TSR_LOSS_CRS		(1<<3)
-#define TSR_JBR			(1<<2)
-#define TSR_ERRORS		(TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR)
-/* Receive status register errors */
-#define RSR_CRC			(1<<2)
-#define RSR_FAE			(1<<1)
-#define RSR_ERRORS		(RSR_CRC | RSR_FAE)
-
-/* Media status register definitions */
-#define MSR_DUPLEX		(1<<4)
-#define MSR_SPEED		(1<<3)
-#define MSR_LINK		(1<<2)
-
-/* Interrupt pipe data */
-#define INT_TSR			0x00
-#define INT_RSR			0x01
-#define INT_MSR			0x02
-#define INT_WAKSR		0x03
-#define INT_TXOK_CNT		0x04
-#define INT_RXLOST_CNT		0x05
-#define INT_CRERR_CNT		0x06
-#define INT_COL_CNT		0x07
-
-/* Transmit status register errors */
-#define TSR_ECOL		(1<<5)
-#define TSR_LCOL		(1<<4)
-#define TSR_LOSS_CRS		(1<<3)
-#define TSR_JBR			(1<<2)
-#define TSR_ERRORS		(TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR)
-/* Receive status register errors */
-#define RSR_CRC			(1<<2)
-#define RSR_FAE			(1<<1)
-#define RSR_ERRORS		(RSR_CRC | RSR_FAE)
-
-/* Media status register definitions */
-#define MSR_DUPLEX		(1<<4)
-#define MSR_SPEED		(1<<3)
-#define MSR_LINK		(1<<2)
-
-/* Interrupt pipe data */
-#define INT_TSR			0x00
-#define INT_RSR			0x01
-#define INT_MSR			0x02
-#define INT_WAKSR		0x03
-#define INT_TXOK_CNT		0x04
-#define INT_RXLOST_CNT		0x05
-#define INT_CRERR_CNT		0x06
-#define INT_COL_CNT		0x07
-
-
-#define	RTL8150_MTU		1540
-#define	RTL8150_TX_TIMEOUT	(HZ)
-#define	RX_SKB_POOL_SIZE	4
-
-/* rtl8150 flags */
-#define	RTL8150_HW_CRC		0
-#define	RX_REG_SET		1
-#define	RTL8150_UNPLUG		2
-#define	RX_URB_FAIL		3
-
-/* Define these values to match your device */
-#define	VENDOR_ID_REALTEK		0x0bda
-#define	VENDOR_ID_MELCO			0x0411
-#define	VENDOR_ID_MICRONET		0x3980
-#define	VENDOR_ID_LONGSHINE		0x07b8
-#define	VENDOR_ID_OQO			0x1557
-#define	VENDOR_ID_ZYXEL			0x0586
-
-#define PRODUCT_ID_RTL8150		0x8150
-#define	PRODUCT_ID_LUAKTX		0x0012
-#define	PRODUCT_ID_LCS8138TX		0x401a
-#define PRODUCT_ID_SP128AR		0x0003
-#define	PRODUCT_ID_PRESTIGE		0x401a
-
-#undef	EEPROM_WRITE
-
-/* table of devices that work with this driver */
-static struct usb_device_id rtl8150_table[] = {
-	{USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8150)},
-	{USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
-	{USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
-	{USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
-	{USB_DEVICE(VENDOR_ID_OQO, PRODUCT_ID_RTL8150)},
-	{USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)},
-	{}
-};
-
-MODULE_DEVICE_TABLE(usb, rtl8150_table);
-
-struct rtl8150 {
-	unsigned long flags;
-	struct usb_device *udev;
-	struct tasklet_struct tl;
-	struct net_device_stats stats;
-	struct net_device *netdev;
-	struct urb *rx_urb, *tx_urb, *intr_urb, *ctrl_urb;
-	struct sk_buff *tx_skb, *rx_skb;
-	struct sk_buff *rx_skb_pool[RX_SKB_POOL_SIZE];
-	spinlock_t rx_pool_lock;
-	struct usb_ctrlrequest dr;
-	int intr_interval;
-	__le16 rx_creg;
-	u8 *intr_buff;
-	u8 phy;
-};
-
-typedef struct rtl8150 rtl8150_t;
-
-static void fill_skb_pool(rtl8150_t *);
-static void free_skb_pool(rtl8150_t *);
-static inline struct sk_buff *pull_skb(rtl8150_t *);
-static void rtl8150_disconnect(struct usb_interface *intf);
-static int rtl8150_probe(struct usb_interface *intf,
-			   const struct usb_device_id *id);
-static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message);
-static int rtl8150_resume(struct usb_interface *intf);
-
-static const char driver_name [] = "rtl8150";
-
-static struct usb_driver rtl8150_driver = {
-	.name =		driver_name,
-	.probe =	rtl8150_probe,
-	.disconnect =	rtl8150_disconnect,
-	.id_table =	rtl8150_table,
-	.suspend =	rtl8150_suspend,
-	.resume =	rtl8150_resume
-};
-
-/*
-**
-**	device related part of the code
-**
-*/
-static int get_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
-{
-	return usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
-			       RTL8150_REQ_GET_REGS, RTL8150_REQT_READ,
-			       indx, 0, data, size, 500);
-}
-
-static int set_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
-{
-	return usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
-			       RTL8150_REQ_SET_REGS, RTL8150_REQT_WRITE,
-			       indx, 0, data, size, 500);
-}
-
-static void ctrl_callback(struct urb *urb)
-{
-	rtl8150_t *dev;
-
-	switch (urb->status) {
-	case 0:
-		break;
-	case -EINPROGRESS:
-		break;
-	case -ENOENT:
-		break;
-	default:
-		warn("ctrl urb status %d", urb->status);
-	}
-	dev = urb->context;
-	clear_bit(RX_REG_SET, &dev->flags);
-}
-
-static int async_set_registers(rtl8150_t * dev, u16 indx, u16 size)
-{
-	int ret;
-
-	if (test_bit(RX_REG_SET, &dev->flags))
-		return -EAGAIN;
-
-	dev->dr.bRequestType = RTL8150_REQT_WRITE;
-	dev->dr.bRequest = RTL8150_REQ_SET_REGS;
-	dev->dr.wValue = cpu_to_le16(indx);
-	dev->dr.wIndex = 0;
-	dev->dr.wLength = cpu_to_le16(size);
-	dev->ctrl_urb->transfer_buffer_length = size;
-	usb_fill_control_urb(dev->ctrl_urb, dev->udev,
-			 usb_sndctrlpipe(dev->udev, 0), (char *) &dev->dr,
-			 &dev->rx_creg, size, ctrl_callback, dev);
-	if ((ret = usb_submit_urb(dev->ctrl_urb, GFP_ATOMIC))) {
-		if (ret == -ENODEV)
-			netif_device_detach(dev->netdev);
-		err("control request submission failed: %d", ret);
-	} else
-		set_bit(RX_REG_SET, &dev->flags);
-
-	return ret;
-}
-
-static int read_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 * reg)
-{
-	int i;
-	u8 data[3], tmp;
-
-	data[0] = phy;
-	data[1] = data[2] = 0;
-	tmp = indx | PHY_READ | PHY_GO;
-	i = 0;
-
-	set_registers(dev, PHYADD, sizeof(data), data);
-	set_registers(dev, PHYCNT, 1, &tmp);
-	do {
-		get_registers(dev, PHYCNT, 1, data);
-	} while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
-
-	if (i < MII_TIMEOUT) {
-		get_registers(dev, PHYDAT, 2, data);
-		*reg = data[0] | (data[1] << 8);
-		return 0;
-	} else
-		return 1;
-}
-
-static int write_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 reg)
-{
-	int i;
-	u8 data[3], tmp;
-
-	data[0] = phy;
-	data[1] = reg & 0xff;
-	data[2] = (reg >> 8) & 0xff;
-	tmp = indx | PHY_WRITE | PHY_GO;
-	i = 0;
-
-	set_registers(dev, PHYADD, sizeof(data), data);
-	set_registers(dev, PHYCNT, 1, &tmp);
-	do {
-		get_registers(dev, PHYCNT, 1, data);
-	} while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
-
-	if (i < MII_TIMEOUT)
-		return 0;
-	else
-		return 1;
-}
-
-static inline void set_ethernet_addr(rtl8150_t * dev)
-{
-	u8 node_id[6];
-
-	get_registers(dev, IDR, sizeof(node_id), node_id);
-	memcpy(dev->netdev->dev_addr, node_id, sizeof(node_id));
-}
-
-static int rtl8150_set_mac_address(struct net_device *netdev, void *p)
-{
-	struct sockaddr *addr = p;
-	rtl8150_t *dev = netdev_priv(netdev);
-	int i;
-
-	if (netif_running(netdev))
-		return -EBUSY;
-
-	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
-	dbg("%s: Setting MAC address to ", netdev->name);
-	for (i = 0; i < 5; i++)
-		dbg("%02X:", netdev->dev_addr[i]);
-	dbg("%02X\n", netdev->dev_addr[i]);
-	/* Set the IDR registers. */
-	set_registers(dev, IDR, sizeof(netdev->dev_addr), netdev->dev_addr);
-#ifdef EEPROM_WRITE
-	{
-	u8 cr;
-	/* Get the CR contents. */
-	get_registers(dev, CR, 1, &cr);
-	/* Set the WEPROM bit (eeprom write enable). */
-	cr |= 0x20;
-	set_registers(dev, CR, 1, &cr);
-	/* Write the MAC address into eeprom. Eeprom writes must be word-sized,
-	   so we need to split them up. */
-	for (i = 0; i * 2 < netdev->addr_len; i++) {
-		set_registers(dev, IDR_EEPROM + (i * 2), 2, 
-		netdev->dev_addr + (i * 2));
-	}
-	/* Clear the WEPROM bit (preventing accidental eeprom writes). */
-	cr &= 0xdf;
-	set_registers(dev, CR, 1, &cr);
-	}
-#endif
-	return 0;
-}
-
-static int rtl8150_reset(rtl8150_t * dev)
-{
-	u8 data = 0x10;
-	int i = HZ;
-
-	set_registers(dev, CR, 1, &data);
-	do {
-		get_registers(dev, CR, 1, &data);
-	} while ((data & 0x10) && --i);
-
-	return (i > 0) ? 1 : 0;
-}
-
-static int alloc_all_urbs(rtl8150_t * dev)
-{
-	dev->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!dev->rx_urb)
-		return 0;
-	dev->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!dev->tx_urb) {
-		usb_free_urb(dev->rx_urb);
-		return 0;
-	}
-	dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!dev->intr_urb) {
-		usb_free_urb(dev->rx_urb);
-		usb_free_urb(dev->tx_urb);
-		return 0;
-	}
-	dev->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!dev->intr_urb) {
-		usb_free_urb(dev->rx_urb);
-		usb_free_urb(dev->tx_urb);
-		usb_free_urb(dev->intr_urb);
-		return 0;
-	}
-
-	return 1;
-}
-
-static void free_all_urbs(rtl8150_t * dev)
-{
-	usb_free_urb(dev->rx_urb);
-	usb_free_urb(dev->tx_urb);
-	usb_free_urb(dev->intr_urb);
-	usb_free_urb(dev->ctrl_urb);
-}
-
-static void unlink_all_urbs(rtl8150_t * dev)
-{
-	usb_kill_urb(dev->rx_urb);
-	usb_kill_urb(dev->tx_urb);
-	usb_kill_urb(dev->intr_urb);
-	usb_kill_urb(dev->ctrl_urb);
-}
-
-static inline struct sk_buff *pull_skb(rtl8150_t *dev)
-{
-	struct sk_buff *skb;
-	int i;
-
-	for (i = 0; i < RX_SKB_POOL_SIZE; i++) {
-		if (dev->rx_skb_pool[i]) {
-			skb = dev->rx_skb_pool[i];
-			dev->rx_skb_pool[i] = NULL;
-			return skb;
-		}
-	}
-	return NULL;
-}
-
-static void read_bulk_callback(struct urb *urb)
-{
-	rtl8150_t *dev;
-	unsigned pkt_len, res;
-	struct sk_buff *skb;
-	struct net_device *netdev;
-	u16 rx_stat;
-	int status;
-
-	dev = urb->context;
-	if (!dev)
-		return;
-	if (test_bit(RTL8150_UNPLUG, &dev->flags))
-		return;
-	netdev = dev->netdev;
-	if (!netif_device_present(netdev))
-		return;
-
-	switch (urb->status) {
-	case 0:
-		break;
-	case -ENOENT:
-		return;	/* the urb is in unlink state */
-	case -ETIME:
-		warn("may be reset is needed?..");
-		goto goon;
-	default:
-		warn("Rx status %d", urb->status);
-		goto goon;
-	}
-
-	if (!dev->rx_skb)
-		goto resched;
-	/* protect against short packets (tell me why we got some?!?) */
-	if (urb->actual_length < 4)
-		goto goon;
-
-	res = urb->actual_length;
-	rx_stat = le16_to_cpu(*(__le16 *)(urb->transfer_buffer + res - 4));
-	pkt_len = res - 4;
-
-	skb_put(dev->rx_skb, pkt_len);
-	dev->rx_skb->protocol = eth_type_trans(dev->rx_skb, netdev);
-	netif_rx(dev->rx_skb);
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += pkt_len;
-
-	spin_lock(&dev->rx_pool_lock);
-	skb = pull_skb(dev);
-	spin_unlock(&dev->rx_pool_lock);
-	if (!skb)
-		goto resched;
-
-	dev->rx_skb = skb;
-goon:
-	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
-		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
-	status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
-	if (status == -ENODEV)
-		netif_device_detach(dev->netdev);
-	else if (status) {
-		set_bit(RX_URB_FAIL, &dev->flags);
-		goto resched;
-	} else {
-		clear_bit(RX_URB_FAIL, &dev->flags);
-	}
-
-	return;
-resched:
-	tasklet_schedule(&dev->tl);
-}
-
-static void rx_fixup(unsigned long data)
-{
-	rtl8150_t *dev;
-	struct sk_buff *skb;
-	int status;
-
-	dev = (rtl8150_t *)data;
-
-	spin_lock_irq(&dev->rx_pool_lock);
-	fill_skb_pool(dev);
-	spin_unlock_irq(&dev->rx_pool_lock);
-	if (test_bit(RX_URB_FAIL, &dev->flags))
-		if (dev->rx_skb)
-			goto try_again;
-	spin_lock_irq(&dev->rx_pool_lock);
-	skb = pull_skb(dev);
-	spin_unlock_irq(&dev->rx_pool_lock);
-	if (skb == NULL)
-		goto tlsched;
-	dev->rx_skb = skb;
-	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
-		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
-try_again:
-	status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
-	if (status == -ENODEV) {
-		netif_device_detach(dev->netdev);
-	} else if (status) {
-		set_bit(RX_URB_FAIL, &dev->flags);
-		goto tlsched;
-	} else {
-		clear_bit(RX_URB_FAIL, &dev->flags);
-	}
-
-	return;
-tlsched:
-	tasklet_schedule(&dev->tl);
-}
-
-static void write_bulk_callback(struct urb *urb)
-{
-	rtl8150_t *dev;
-
-	dev = urb->context;
-	if (!dev)
-		return;
-	dev_kfree_skb_irq(dev->tx_skb);
-	if (!netif_device_present(dev->netdev))
-		return;
-	if (urb->status)
-		info("%s: Tx status %d", dev->netdev->name, urb->status);
-	dev->netdev->trans_start = jiffies;
-	netif_wake_queue(dev->netdev);
-}
-
-static void intr_callback(struct urb *urb)
-{
-	rtl8150_t *dev;
-	__u8 *d;
-	int status;
-
-	dev = urb->context;
-	if (!dev)
-		return;
-	switch (urb->status) {
-	case 0:			/* success */
-		break;
-	case -ECONNRESET:	/* unlink */
-	case -ENOENT:
-	case -ESHUTDOWN:
-		return;
-	/* -EPIPE:  should clear the halt */
-	default:
-		info("%s: intr status %d", dev->netdev->name, urb->status);
-		goto resubmit;
-	}
-
-	d = urb->transfer_buffer;
-	if (d[0] & TSR_ERRORS) {
-		dev->stats.tx_errors++;
-		if (d[INT_TSR] & (TSR_ECOL | TSR_JBR))
-			dev->stats.tx_aborted_errors++;
-		if (d[INT_TSR] & TSR_LCOL)
-			dev->stats.tx_window_errors++;
-		if (d[INT_TSR] & TSR_LOSS_CRS)
-			dev->stats.tx_carrier_errors++;
-	}
-	/* Report link status changes to the network stack */
-	if ((d[INT_MSR] & MSR_LINK) == 0) {
-		if (netif_carrier_ok(dev->netdev)) {
-			netif_carrier_off(dev->netdev);
-			dbg("%s: LINK LOST\n", __func__);
-		}
-	} else {
-		if (!netif_carrier_ok(dev->netdev)) {
-			netif_carrier_on(dev->netdev);
-			dbg("%s: LINK CAME BACK\n", __func__);
-		}
-	}
-
-resubmit:
-	status = usb_submit_urb (urb, GFP_ATOMIC);
-	if (status == -ENODEV)
-		netif_device_detach(dev->netdev);
-	else if (status)
-		err ("can't resubmit intr, %s-%s/input0, status %d",
-				dev->udev->bus->bus_name,
-				dev->udev->devpath, status);
-}
-
-static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message)
-{
-	rtl8150_t *dev = usb_get_intfdata(intf);
-
-	netif_device_detach(dev->netdev);
-
-	if (netif_running(dev->netdev)) {
-		usb_kill_urb(dev->rx_urb);
-		usb_kill_urb(dev->intr_urb);
-	}
-	return 0;
-}
-
-static int rtl8150_resume(struct usb_interface *intf)
-{
-	rtl8150_t *dev = usb_get_intfdata(intf);
-
-	netif_device_attach(dev->netdev);
-	if (netif_running(dev->netdev)) {
-		dev->rx_urb->status = 0;
-		dev->rx_urb->actual_length = 0;
-		read_bulk_callback(dev->rx_urb);
-
-		dev->intr_urb->status = 0;
-		dev->intr_urb->actual_length = 0;
-		intr_callback(dev->intr_urb);
-	}
-	return 0;
-}
-
-/*
-**
-**	network related part of the code
-**
-*/
-
-static void fill_skb_pool(rtl8150_t *dev)
-{
-	struct sk_buff *skb;
-	int i;
-
-	for (i = 0; i < RX_SKB_POOL_SIZE; i++) {
-		if (dev->rx_skb_pool[i])
-			continue;
-		skb = dev_alloc_skb(RTL8150_MTU + 2);
-		if (!skb) {
-			return;
-		}
-		skb_reserve(skb, 2);
-		dev->rx_skb_pool[i] = skb;
-	}
-}
-
-static void free_skb_pool(rtl8150_t *dev)
-{
-	int i;
-
-	for (i = 0; i < RX_SKB_POOL_SIZE; i++)
-		if (dev->rx_skb_pool[i])
-			dev_kfree_skb(dev->rx_skb_pool[i]);
-}
-
-static int enable_net_traffic(rtl8150_t * dev)
-{
-	u8 cr, tcr, rcr, msr;
-
-	if (!rtl8150_reset(dev)) {
-		warn("%s - device reset failed", __FUNCTION__);
-	}
-	/* RCR bit7=1 attach Rx info at the end;  =0 HW CRC (which is broken) */
-	rcr = 0x9e;
-	dev->rx_creg = cpu_to_le16(rcr);
-	tcr = 0xd8;
-	cr = 0x0c;
-	if (!(rcr & 0x80))
-		set_bit(RTL8150_HW_CRC, &dev->flags);
-	set_registers(dev, RCR, 1, &rcr);
-	set_registers(dev, TCR, 1, &tcr);
-	set_registers(dev, CR, 1, &cr);
-	get_registers(dev, MSR, 1, &msr);
-
-	return 0;
-}
-
-static void disable_net_traffic(rtl8150_t * dev)
-{
-	u8 cr;
-
-	get_registers(dev, CR, 1, &cr);
-	cr &= 0xf3;
-	set_registers(dev, CR, 1, &cr);
-}
-
-static struct net_device_stats *rtl8150_netdev_stats(struct net_device *dev)
-{
-	return &((rtl8150_t *)netdev_priv(dev))->stats;
-}
-
-static void rtl8150_tx_timeout(struct net_device *netdev)
-{
-	rtl8150_t *dev = netdev_priv(netdev);
-	warn("%s: Tx timeout.", netdev->name);
-	usb_unlink_urb(dev->tx_urb);
-	dev->stats.tx_errors++;
-}
-
-static void rtl8150_set_multicast(struct net_device *netdev)
-{
-	rtl8150_t *dev = netdev_priv(netdev);
-	netif_stop_queue(netdev);
-	if (netdev->flags & IFF_PROMISC) {
-		dev->rx_creg |= cpu_to_le16(0x0001);
-		info("%s: promiscuous mode", netdev->name);
-	} else if (netdev->mc_count ||
-		   (netdev->flags & IFF_ALLMULTI)) {
-		dev->rx_creg &= cpu_to_le16(0xfffe);
-		dev->rx_creg |= cpu_to_le16(0x0002);
-		info("%s: allmulti set", netdev->name);
-	} else {
-		/* ~RX_MULTICAST, ~RX_PROMISCUOUS */
-		dev->rx_creg &= cpu_to_le16(0x00fc);
-	}
-	async_set_registers(dev, RCR, 2);
-	netif_wake_queue(netdev);
-}
-
-static int rtl8150_start_xmit(struct sk_buff *skb, struct net_device *netdev)
-{
-	rtl8150_t *dev = netdev_priv(netdev);
-	int count, res;
-
-	netif_stop_queue(netdev);
-	count = (skb->len < 60) ? 60 : skb->len;
-	count = (count & 0x3f) ? count : count + 1;
-	dev->tx_skb = skb;
-	usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2),
-		      skb->data, count, write_bulk_callback, dev);
-	if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) {
-		/* Can we get/handle EPIPE here? */
-		if (res == -ENODEV)
-			netif_device_detach(dev->netdev);
-		else {
-			warn("failed tx_urb %d\n", res);
-			dev->stats.tx_errors++;
-			netif_start_queue(netdev);
-		}
-	} else {
-		dev->stats.tx_packets++;
-		dev->stats.tx_bytes += skb->len;
-		netdev->trans_start = jiffies;
-	}
-
-	return 0;
-}
-
-
-static void set_carrier(struct net_device *netdev)
-{
-	rtl8150_t *dev = netdev_priv(netdev);
-	short tmp;
-
-	get_registers(dev, CSCR, 2, &tmp);
-	if (tmp & CSCR_LINK_STATUS)
-		netif_carrier_on(netdev);
-	else
-		netif_carrier_off(netdev);
-}
-
-static int rtl8150_open(struct net_device *netdev)
-{
-	rtl8150_t *dev = netdev_priv(netdev);
-	int res;
-
-	if (dev->rx_skb == NULL)
-		dev->rx_skb = pull_skb(dev);
-	if (!dev->rx_skb)
-		return -ENOMEM;
-
-	set_registers(dev, IDR, 6, netdev->dev_addr);
-	
-	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
-		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
-	if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) {
-		if (res == -ENODEV)
-			netif_device_detach(dev->netdev);
-		warn("%s: rx_urb submit failed: %d", __FUNCTION__, res);
-		return res;
-	}
-	usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3),
-		     dev->intr_buff, INTBUFSIZE, intr_callback,
-		     dev, dev->intr_interval);
-	if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) {
-		if (res == -ENODEV)
-			netif_device_detach(dev->netdev);
-		warn("%s: intr_urb submit failed: %d", __FUNCTION__, res);
-		usb_kill_urb(dev->rx_urb);
-		return res;
-	}
-	enable_net_traffic(dev);
-	set_carrier(netdev);
-	netif_start_queue(netdev);
-
-	return res;
-}
-
-static int rtl8150_close(struct net_device *netdev)
-{
-	rtl8150_t *dev = netdev_priv(netdev);
-	int res = 0;
-
-	netif_stop_queue(netdev);
-	if (!test_bit(RTL8150_UNPLUG, &dev->flags))
-		disable_net_traffic(dev);
-	unlink_all_urbs(dev);
-
-	return res;
-}
-
-static void rtl8150_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
-{
-	rtl8150_t *dev = netdev_priv(netdev);
-
-	strncpy(info->driver, driver_name, ETHTOOL_BUSINFO_LEN);
-	strncpy(info->version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN);
-	usb_make_path(dev->udev, info->bus_info, sizeof info->bus_info);
-}
-
-static int rtl8150_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
-{
-	rtl8150_t *dev = netdev_priv(netdev);
-	short lpa, bmcr;
-
-	ecmd->supported = (SUPPORTED_10baseT_Half |
-			  SUPPORTED_10baseT_Full |
-			  SUPPORTED_100baseT_Half |
-			  SUPPORTED_100baseT_Full |
-			  SUPPORTED_Autoneg |
-			  SUPPORTED_TP | SUPPORTED_MII);
-	ecmd->port = PORT_TP;
-	ecmd->transceiver = XCVR_INTERNAL;
-	ecmd->phy_address = dev->phy;
-	get_registers(dev, BMCR, 2, &bmcr);
-	get_registers(dev, ANLP, 2, &lpa);
-	if (bmcr & BMCR_ANENABLE) {
-		ecmd->autoneg = AUTONEG_ENABLE;
-		ecmd->speed = (lpa & (LPA_100HALF | LPA_100FULL)) ?
-			     SPEED_100 : SPEED_10;
-		if (ecmd->speed == SPEED_100)
-			ecmd->duplex = (lpa & LPA_100FULL) ?
-			    DUPLEX_FULL : DUPLEX_HALF;
-		else
-			ecmd->duplex = (lpa & LPA_10FULL) ?
-			    DUPLEX_FULL : DUPLEX_HALF;
-	} else {
-		ecmd->autoneg = AUTONEG_DISABLE;
-		ecmd->speed = (bmcr & BMCR_SPEED100) ?
-		    SPEED_100 : SPEED_10;
-		ecmd->duplex = (bmcr & BMCR_FULLDPLX) ?
-		    DUPLEX_FULL : DUPLEX_HALF;
-	}
-	return 0;
-}
-
-static struct ethtool_ops ops = {
-	.get_drvinfo = rtl8150_get_drvinfo,
-	.get_settings = rtl8150_get_settings,
-	.get_link = ethtool_op_get_link
-};
-
-static int rtl8150_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
-{
-	rtl8150_t *dev = netdev_priv(netdev);
-	u16 *data = (u16 *) & rq->ifr_ifru;
-	int res = 0;
-
-	switch (cmd) {
-	case SIOCDEVPRIVATE:
-		data[0] = dev->phy;
-	case SIOCDEVPRIVATE + 1:
-		read_mii_word(dev, dev->phy, (data[1] & 0x1f), &data[3]);
-		break;
-	case SIOCDEVPRIVATE + 2:
-		if (!capable(CAP_NET_ADMIN))
-			return -EPERM;
-		write_mii_word(dev, dev->phy, (data[1] & 0x1f), data[2]);
-		break;
-	default:
-		res = -EOPNOTSUPP;
-	}
-
-	return res;
-}
-
-static int rtl8150_probe(struct usb_interface *intf,
-			 const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-	rtl8150_t *dev;
-	struct net_device *netdev;
-
-	netdev = alloc_etherdev(sizeof(rtl8150_t));
-	if (!netdev) {
-		err("Out of memory");
-		return -ENOMEM;
-	}
-
-	dev = netdev_priv(netdev);
-	memset(dev, 0, sizeof(rtl8150_t));
-
-	dev->intr_buff = kmalloc(INTBUFSIZE, GFP_KERNEL);
-	if (!dev->intr_buff) {
-		free_netdev(netdev);
-		return -ENOMEM;
-	}
-
-	tasklet_init(&dev->tl, rx_fixup, (unsigned long)dev);
-	spin_lock_init(&dev->rx_pool_lock);
-	
-	dev->udev = udev;
-	dev->netdev = netdev;
-	SET_MODULE_OWNER(netdev);
-	netdev->open = rtl8150_open;
-	netdev->stop = rtl8150_close;
-	netdev->do_ioctl = rtl8150_ioctl;
-	netdev->watchdog_timeo = RTL8150_TX_TIMEOUT;
-	netdev->tx_timeout = rtl8150_tx_timeout;
-	netdev->hard_start_xmit = rtl8150_start_xmit;
-	netdev->set_multicast_list = rtl8150_set_multicast;
-	netdev->set_mac_address = rtl8150_set_mac_address;
-	netdev->get_stats = rtl8150_netdev_stats;
-	netdev->mtu = RTL8150_MTU;
-	SET_ETHTOOL_OPS(netdev, &ops);
-	dev->intr_interval = 100;	/* 100ms */
-
-	if (!alloc_all_urbs(dev)) {
-		err("out of memory");
-		goto out;
-	}
-	if (!rtl8150_reset(dev)) {
-		err("couldn't reset the device");
-		goto out1;
-	}
-	fill_skb_pool(dev);
-	set_ethernet_addr(dev);
-	
-	usb_set_intfdata(intf, dev);
-	SET_NETDEV_DEV(netdev, &intf->dev);
-	if (register_netdev(netdev) != 0) {
-		err("couldn't register the device");
-		goto out2;
-	}
-
-	info("%s: rtl8150 is detected", netdev->name);
-
-	return 0;
-
-out2:
-	usb_set_intfdata(intf, NULL);
-	free_skb_pool(dev);
-out1:
-	free_all_urbs(dev);
-out:
-	kfree(dev->intr_buff);
-	free_netdev(netdev);
-	return -EIO;
-}
-
-static void rtl8150_disconnect(struct usb_interface *intf)
-{
-	rtl8150_t *dev = usb_get_intfdata(intf);
-
-	usb_set_intfdata(intf, NULL);
-	if (dev) {
-		set_bit(RTL8150_UNPLUG, &dev->flags);
-		tasklet_disable(&dev->tl);
-		tasklet_kill(&dev->tl);
-		unregister_netdev(dev->netdev);
-		unlink_all_urbs(dev);
-		free_all_urbs(dev);
-		free_skb_pool(dev);
-		if (dev->rx_skb)
-			dev_kfree_skb(dev->rx_skb);
-		kfree(dev->intr_buff);
-		free_netdev(dev->netdev);
-	}
-}
-
-static int __init usb_rtl8150_init(void)
-{
-	info(DRIVER_DESC " " DRIVER_VERSION);
-	return usb_register(&rtl8150_driver);
-}
-
-static void __exit usb_rtl8150_exit(void)
-{
-	usb_deregister(&rtl8150_driver);
-}
-
-module_init(usb_rtl8150_init);
-module_exit(usb_rtl8150_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
deleted file mode 100644
index f9cd42d058b..00000000000
--- a/drivers/usb/net/usbnet.c
+++ /dev/null
@@ -1,1304 +0,0 @@
-/*
- * USB Network driver infrastructure
- * Copyright (C) 2000-2005 by David Brownell
- * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * This is a generic "USB networking" framework that works with several
- * kinds of full and high speed networking devices:  host-to-host cables,
- * smart usb peripherals, and actual Ethernet adapters.
- *
- * These devices usually differ in terms of control protocols (if they
- * even have one!) and sometimes they define new framing to wrap or batch
- * Ethernet packets.  Otherwise, they talk to USB pretty much the same,
- * so interface (un)binding, endpoint I/O queues, fault handling, and other
- * issues can usefully be addressed by this framework.
- */
-
-// #define	DEBUG			// error path messages, extra info
-// #define	VERBOSE			// more; success messages
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/workqueue.h>
-#include <linux/mii.h>
-#include <linux/usb.h>
-
-#include "usbnet.h"
-
-#define DRIVER_VERSION		"22-Aug-2005"
-
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Nineteen USB 1.1 max size bulk transactions per frame (ms), max.
- * Several dozen bytes of IPv4 data can fit in two such transactions.
- * One maximum size Ethernet packet takes twenty four of them.
- * For high speed, each frame comfortably fits almost 36 max size
- * Ethernet packets (so queues should be bigger).
- *
- * REVISIT qlens should be members of 'struct usbnet'; the goal is to
- * let the USB host controller be busy for 5msec or more before an irq
- * is required, under load.  Jumbograms change the equation.
- */
-#define RX_MAX_QUEUE_MEMORY (60 * 1518)
-#define	RX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \
-			(RX_MAX_QUEUE_MEMORY/(dev)->rx_urb_size) : 4)
-#define	TX_QLEN(dev) (((dev)->udev->speed == USB_SPEED_HIGH) ? \
-			(RX_MAX_QUEUE_MEMORY/(dev)->hard_mtu) : 4)
-
-// reawaken network queue this soon after stopping; else watchdog barks
-#define TX_TIMEOUT_JIFFIES	(5*HZ)
-
-// throttle rx/tx briefly after some faults, so khubd might disconnect()
-// us (it polls at HZ/4 usually) before we report too many false errors.
-#define THROTTLE_JIFFIES	(HZ/8)
-
-// between wakeups
-#define UNLINK_TIMEOUT_MS	3
-
-/*-------------------------------------------------------------------------*/
-
-// randomly generated ethernet address
-static u8	node_id [ETH_ALEN];
-
-static const char driver_name [] = "usbnet";
-
-/* use ethtool to change the level for any given device */
-static int msg_level = -1;
-module_param (msg_level, int, 0);
-MODULE_PARM_DESC (msg_level, "Override default message level");
-
-/*-------------------------------------------------------------------------*/
-
-/* handles CDC Ethernet and many other network "bulk data" interfaces */
-int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
-{
-	int				tmp;
-	struct usb_host_interface	*alt = NULL;
-	struct usb_host_endpoint	*in = NULL, *out = NULL;
-	struct usb_host_endpoint	*status = NULL;
-
-	for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
-		unsigned	ep;
-
-		in = out = status = NULL;
-		alt = intf->altsetting + tmp;
-
-		/* take the first altsetting with in-bulk + out-bulk;
-		 * remember any status endpoint, just in case;
-		 * ignore other endpoints and altsetttings.
-		 */
-		for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
-			struct usb_host_endpoint	*e;
-			int				intr = 0;
-
-			e = alt->endpoint + ep;
-			switch (e->desc.bmAttributes) {
-			case USB_ENDPOINT_XFER_INT:
-				if (!usb_endpoint_dir_in(&e->desc))
-					continue;
-				intr = 1;
-				/* FALLTHROUGH */
-			case USB_ENDPOINT_XFER_BULK:
-				break;
-			default:
-				continue;
-			}
-			if (usb_endpoint_dir_in(&e->desc)) {
-				if (!intr && !in)
-					in = e;
-				else if (intr && !status)
-					status = e;
-			} else {
-				if (!out)
-					out = e;
-			}
-		}
-		if (in && out)
-			break;
-	}
-	if (!alt || !in || !out)
-		return -EINVAL;
-
-	if (alt->desc.bAlternateSetting != 0
-			|| !(dev->driver_info->flags & FLAG_NO_SETINT)) {
-		tmp = usb_set_interface (dev->udev, alt->desc.bInterfaceNumber,
-				alt->desc.bAlternateSetting);
-		if (tmp < 0)
-			return tmp;
-	}
-
-	dev->in = usb_rcvbulkpipe (dev->udev,
-			in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
-	dev->out = usb_sndbulkpipe (dev->udev,
-			out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
-	dev->status = status;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(usbnet_get_endpoints);
-
-static void intr_complete (struct urb *urb);
-
-static int init_status (struct usbnet *dev, struct usb_interface *intf)
-{
-	char		*buf = NULL;
-	unsigned	pipe = 0;
-	unsigned	maxp;
-	unsigned	period;
-
-	if (!dev->driver_info->status)
-		return 0;
-
-	pipe = usb_rcvintpipe (dev->udev,
-			dev->status->desc.bEndpointAddress
-				& USB_ENDPOINT_NUMBER_MASK);
-	maxp = usb_maxpacket (dev->udev, pipe, 0);
-
-	/* avoid 1 msec chatter:  min 8 msec poll rate */
-	period = max ((int) dev->status->desc.bInterval,
-		(dev->udev->speed == USB_SPEED_HIGH) ? 7 : 3);
-
-	buf = kmalloc (maxp, GFP_KERNEL);
-	if (buf) {
-		dev->interrupt = usb_alloc_urb (0, GFP_KERNEL);
-		if (!dev->interrupt) {
-			kfree (buf);
-			return -ENOMEM;
-		} else {
-			usb_fill_int_urb(dev->interrupt, dev->udev, pipe,
-				buf, maxp, intr_complete, dev, period);
-			dev_dbg(&intf->dev,
-				"status ep%din, %d bytes period %d\n",
-				usb_pipeendpoint(pipe), maxp, period);
-		}
-	}
-	return  0;
-}
-
-/* Passes this packet up the stack, updating its accounting.
- * Some link protocols batch packets, so their rx_fixup paths
- * can return clones as well as just modify the original skb.
- */
-void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
-{
-	int	status;
-
-	skb->protocol = eth_type_trans (skb, dev->net);
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += skb->len;
-
-	if (netif_msg_rx_status (dev))
-		devdbg (dev, "< rx, len %zu, type 0x%x",
-			skb->len + sizeof (struct ethhdr), skb->protocol);
-	memset (skb->cb, 0, sizeof (struct skb_data));
-	status = netif_rx (skb);
-	if (status != NET_RX_SUCCESS && netif_msg_rx_err (dev))
-		devdbg (dev, "netif_rx status %d", status);
-}
-EXPORT_SYMBOL_GPL(usbnet_skb_return);
-
-
-/*-------------------------------------------------------------------------
- *
- * Network Device Driver (peer link to "Host Device", from USB host)
- *
- *-------------------------------------------------------------------------*/
-
-static int usbnet_change_mtu (struct net_device *net, int new_mtu)
-{
-	struct usbnet	*dev = netdev_priv(net);
-	int		ll_mtu = new_mtu + net->hard_header_len;
-	int		old_hard_mtu = dev->hard_mtu;
-	int		old_rx_urb_size = dev->rx_urb_size;
-
-	if (new_mtu <= 0)
-		return -EINVAL;
-	// no second zero-length packet read wanted after mtu-sized packets
-	if ((ll_mtu % dev->maxpacket) == 0)
-		return -EDOM;
-	net->mtu = new_mtu;
-
-	dev->hard_mtu = net->mtu + net->hard_header_len;
-	if (dev->rx_urb_size == old_hard_mtu) {
-		dev->rx_urb_size = dev->hard_mtu;
-		if (dev->rx_urb_size > old_rx_urb_size)
-			usbnet_unlink_rx_urbs(dev);
-	}
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static struct net_device_stats *usbnet_get_stats (struct net_device *net)
-{
-	struct usbnet	*dev = netdev_priv(net);
-	return &dev->stats;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* some LK 2.4 HCDs oopsed if we freed or resubmitted urbs from
- * completion callbacks.  2.5 should have fixed those bugs...
- */
-
-static void defer_bh(struct usbnet *dev, struct sk_buff *skb, struct sk_buff_head *list)
-{
-	unsigned long		flags;
-
-	spin_lock_irqsave(&list->lock, flags);
-	__skb_unlink(skb, list);
-	spin_unlock(&list->lock);
-	spin_lock(&dev->done.lock);
-	__skb_queue_tail(&dev->done, skb);
-	if (dev->done.qlen == 1)
-		tasklet_schedule(&dev->bh);
-	spin_unlock_irqrestore(&dev->done.lock, flags);
-}
-
-/* some work can't be done in tasklets, so we use keventd
- *
- * NOTE:  annoying asymmetry:  if it's active, schedule_work() fails,
- * but tasklet_schedule() doesn't.  hope the failure is rare.
- */
-void usbnet_defer_kevent (struct usbnet *dev, int work)
-{
-	set_bit (work, &dev->flags);
-	if (!schedule_work (&dev->kevent))
-		deverr (dev, "kevent %d may have been dropped", work);
-	else
-		devdbg (dev, "kevent %d scheduled", work);
-}
-EXPORT_SYMBOL_GPL(usbnet_defer_kevent);
-
-/*-------------------------------------------------------------------------*/
-
-static void rx_complete (struct urb *urb);
-
-static void rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
-{
-	struct sk_buff		*skb;
-	struct skb_data		*entry;
-	int			retval = 0;
-	unsigned long		lockflags;
-	size_t			size = dev->rx_urb_size;
-
-	if ((skb = alloc_skb (size + NET_IP_ALIGN, flags)) == NULL) {
-		if (netif_msg_rx_err (dev))
-			devdbg (dev, "no rx skb");
-		usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
-		usb_free_urb (urb);
-		return;
-	}
-	skb_reserve (skb, NET_IP_ALIGN);
-
-	entry = (struct skb_data *) skb->cb;
-	entry->urb = urb;
-	entry->dev = dev;
-	entry->state = rx_start;
-	entry->length = 0;
-
-	usb_fill_bulk_urb (urb, dev->udev, dev->in,
-		skb->data, size, rx_complete, skb);
-
-	spin_lock_irqsave (&dev->rxq.lock, lockflags);
-
-	if (netif_running (dev->net)
-			&& netif_device_present (dev->net)
-			&& !test_bit (EVENT_RX_HALT, &dev->flags)) {
-		switch (retval = usb_submit_urb (urb, GFP_ATOMIC)){
-		case -EPIPE:
-			usbnet_defer_kevent (dev, EVENT_RX_HALT);
-			break;
-		case -ENOMEM:
-			usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
-			break;
-		case -ENODEV:
-			if (netif_msg_ifdown (dev))
-				devdbg (dev, "device gone");
-			netif_device_detach (dev->net);
-			break;
-		default:
-			if (netif_msg_rx_err (dev))
-				devdbg (dev, "rx submit, %d", retval);
-			tasklet_schedule (&dev->bh);
-			break;
-		case 0:
-			__skb_queue_tail (&dev->rxq, skb);
-		}
-	} else {
-		if (netif_msg_ifdown (dev))
-			devdbg (dev, "rx: stopped");
-		retval = -ENOLINK;
-	}
-	spin_unlock_irqrestore (&dev->rxq.lock, lockflags);
-	if (retval) {
-		dev_kfree_skb_any (skb);
-		usb_free_urb (urb);
-	}
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
-{
-	if (dev->driver_info->rx_fixup
-			&& !dev->driver_info->rx_fixup (dev, skb))
-		goto error;
-	// else network stack removes extra byte if we forced a short packet
-
-	if (skb->len)
-		usbnet_skb_return (dev, skb);
-	else {
-		if (netif_msg_rx_err (dev))
-			devdbg (dev, "drop");
-error:
-		dev->stats.rx_errors++;
-		skb_queue_tail (&dev->done, skb);
-	}
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void rx_complete (struct urb *urb)
-{
-	struct sk_buff		*skb = (struct sk_buff *) urb->context;
-	struct skb_data		*entry = (struct skb_data *) skb->cb;
-	struct usbnet		*dev = entry->dev;
-	int			urb_status = urb->status;
-
-	skb_put (skb, urb->actual_length);
-	entry->state = rx_done;
-	entry->urb = NULL;
-
-	switch (urb_status) {
-	    // success
-	    case 0:
-		if (skb->len < dev->net->hard_header_len) {
-			entry->state = rx_cleanup;
-			dev->stats.rx_errors++;
-			dev->stats.rx_length_errors++;
-			if (netif_msg_rx_err (dev))
-				devdbg (dev, "rx length %d", skb->len);
-		}
-		break;
-
-	    // stalls need manual reset. this is rare ... except that
-	    // when going through USB 2.0 TTs, unplug appears this way.
-	    // we avoid the highspeed version of the ETIMEOUT/EILSEQ
-	    // storm, recovering as needed.
-	    case -EPIPE:
-		dev->stats.rx_errors++;
-		usbnet_defer_kevent (dev, EVENT_RX_HALT);
-		// FALLTHROUGH
-
-	    // software-driven interface shutdown
-	    case -ECONNRESET:		// async unlink
-	    case -ESHUTDOWN:		// hardware gone
-		if (netif_msg_ifdown (dev))
-			devdbg (dev, "rx shutdown, code %d", urb_status);
-		goto block;
-
-	    // we get controller i/o faults during khubd disconnect() delays.
-	    // throttle down resubmits, to avoid log floods; just temporarily,
-	    // so we still recover when the fault isn't a khubd delay.
-	    case -EPROTO:
-	    case -ETIME:
-	    case -EILSEQ:
-		dev->stats.rx_errors++;
-		if (!timer_pending (&dev->delay)) {
-			mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
-			if (netif_msg_link (dev))
-				devdbg (dev, "rx throttle %d", urb_status);
-		}
-block:
-		entry->state = rx_cleanup;
-		entry->urb = urb;
-		urb = NULL;
-		break;
-
-	    // data overrun ... flush fifo?
-	    case -EOVERFLOW:
-		dev->stats.rx_over_errors++;
-		// FALLTHROUGH
-
-	    default:
-		entry->state = rx_cleanup;
-		dev->stats.rx_errors++;
-		if (netif_msg_rx_err (dev))
-			devdbg (dev, "rx status %d", urb_status);
-		break;
-	}
-
-	defer_bh(dev, skb, &dev->rxq);
-
-	if (urb) {
-		if (netif_running (dev->net)
-				&& !test_bit (EVENT_RX_HALT, &dev->flags)) {
-			rx_submit (dev, urb, GFP_ATOMIC);
-			return;
-		}
-		usb_free_urb (urb);
-	}
-	if (netif_msg_rx_err (dev))
-		devdbg (dev, "no read resubmitted");
-}
-
-static void intr_complete (struct urb *urb)
-{
-	struct usbnet	*dev = urb->context;
-	int		status = urb->status;
-
-	switch (status) {
-	    /* success */
-	    case 0:
-		dev->driver_info->status(dev, urb);
-		break;
-
-	    /* software-driven interface shutdown */
-	    case -ENOENT:		// urb killed
-	    case -ESHUTDOWN:		// hardware gone
-		if (netif_msg_ifdown (dev))
-			devdbg (dev, "intr shutdown, code %d", status);
-		return;
-
-	    /* NOTE:  not throttling like RX/TX, since this endpoint
-	     * already polls infrequently
-	     */
-	    default:
-		devdbg (dev, "intr status %d", status);
-		break;
-	}
-
-	if (!netif_running (dev->net))
-		return;
-
-	memset(urb->transfer_buffer, 0, urb->transfer_buffer_length);
-	status = usb_submit_urb (urb, GFP_ATOMIC);
-	if (status != 0 && netif_msg_timer (dev))
-		deverr(dev, "intr resubmit --> %d", status);
-}
-
-/*-------------------------------------------------------------------------*/
-
-// unlink pending rx/tx; completion handlers do all other cleanup
-
-static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q)
-{
-	unsigned long		flags;
-	struct sk_buff		*skb, *skbnext;
-	int			count = 0;
-
-	spin_lock_irqsave (&q->lock, flags);
-	for (skb = q->next; skb != (struct sk_buff *) q; skb = skbnext) {
-		struct skb_data		*entry;
-		struct urb		*urb;
-		int			retval;
-
-		entry = (struct skb_data *) skb->cb;
-		urb = entry->urb;
-		skbnext = skb->next;
-
-		// during some PM-driven resume scenarios,
-		// these (async) unlinks complete immediately
-		retval = usb_unlink_urb (urb);
-		if (retval != -EINPROGRESS && retval != 0)
-			devdbg (dev, "unlink urb err, %d", retval);
-		else
-			count++;
-	}
-	spin_unlock_irqrestore (&q->lock, flags);
-	return count;
-}
-
-// Flush all pending rx urbs
-// minidrivers may need to do this when the MTU changes
-
-void usbnet_unlink_rx_urbs(struct usbnet *dev)
-{
-	if (netif_running(dev->net)) {
-		(void) unlink_urbs (dev, &dev->rxq);
-		tasklet_schedule(&dev->bh);
-	}
-}
-EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs);
-
-/*-------------------------------------------------------------------------*/
-
-// precondition: never called in_interrupt
-
-static int usbnet_stop (struct net_device *net)
-{
-	struct usbnet		*dev = netdev_priv(net);
-	int			temp;
-	DECLARE_WAIT_QUEUE_HEAD_ONSTACK (unlink_wakeup);
-	DECLARE_WAITQUEUE (wait, current);
-
-	netif_stop_queue (net);
-
-	if (netif_msg_ifdown (dev))
-		devinfo (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld",
-			dev->stats.rx_packets, dev->stats.tx_packets,
-			dev->stats.rx_errors, dev->stats.tx_errors
-			);
-
-	// ensure there are no more active urbs
-	add_wait_queue (&unlink_wakeup, &wait);
-	dev->wait = &unlink_wakeup;
-	temp = unlink_urbs (dev, &dev->txq) + unlink_urbs (dev, &dev->rxq);
-
-	// maybe wait for deletions to finish.
-	while (!skb_queue_empty(&dev->rxq) &&
-	       !skb_queue_empty(&dev->txq) &&
-	       !skb_queue_empty(&dev->done)) {
-		msleep(UNLINK_TIMEOUT_MS);
-		if (netif_msg_ifdown (dev))
-			devdbg (dev, "waited for %d urb completions", temp);
-	}
-	dev->wait = NULL;
-	remove_wait_queue (&unlink_wakeup, &wait);
-
-	usb_kill_urb(dev->interrupt);
-
-	/* deferred work (task, timer, softirq) must also stop.
-	 * can't flush_scheduled_work() until we drop rtnl (later),
-	 * else workers could deadlock; so make workers a NOP.
-	 */
-	dev->flags = 0;
-	del_timer_sync (&dev->delay);
-	tasklet_kill (&dev->bh);
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-// posts reads, and enables write queuing
-
-// precondition: never called in_interrupt
-
-static int usbnet_open (struct net_device *net)
-{
-	struct usbnet		*dev = netdev_priv(net);
-	int			retval = 0;
-	struct driver_info	*info = dev->driver_info;
-
-	// put into "known safe" state
-	if (info->reset && (retval = info->reset (dev)) < 0) {
-		if (netif_msg_ifup (dev))
-			devinfo (dev,
-				"open reset fail (%d) usbnet usb-%s-%s, %s",
-				retval,
-				dev->udev->bus->bus_name, dev->udev->devpath,
-			info->description);
-		goto done;
-	}
-
-	// insist peer be connected
-	if (info->check_connect && (retval = info->check_connect (dev)) < 0) {
-		if (netif_msg_ifup (dev))
-			devdbg (dev, "can't open; %d", retval);
-		goto done;
-	}
-
-	/* start any status interrupt transfer */
-	if (dev->interrupt) {
-		retval = usb_submit_urb (dev->interrupt, GFP_KERNEL);
-		if (retval < 0) {
-			if (netif_msg_ifup (dev))
-				deverr (dev, "intr submit %d", retval);
-			goto done;
-		}
-	}
-
-	netif_start_queue (net);
-	if (netif_msg_ifup (dev)) {
-		char	*framing;
-
-		if (dev->driver_info->flags & FLAG_FRAMING_NC)
-			framing = "NetChip";
-		else if (dev->driver_info->flags & FLAG_FRAMING_GL)
-			framing = "GeneSys";
-		else if (dev->driver_info->flags & FLAG_FRAMING_Z)
-			framing = "Zaurus";
-		else if (dev->driver_info->flags & FLAG_FRAMING_RN)
-			framing = "RNDIS";
-		else if (dev->driver_info->flags & FLAG_FRAMING_AX)
-			framing = "ASIX";
-		else
-			framing = "simple";
-
-		devinfo (dev, "open: enable queueing "
-				"(rx %d, tx %d) mtu %d %s framing",
-			(int)RX_QLEN (dev), (int)TX_QLEN (dev), dev->net->mtu,
-			framing);
-	}
-
-	// delay posting reads until we're fully open
-	tasklet_schedule (&dev->bh);
-done:
-	return retval;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* ethtool methods; minidrivers may need to add some more, but
- * they'll probably want to use this base set.
- */
-
-#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE)
-#define HAVE_MII
-
-int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd)
-{
-	struct usbnet *dev = netdev_priv(net);
-
-	if (!dev->mii.mdio_read)
-		return -EOPNOTSUPP;
-
-	return mii_ethtool_gset(&dev->mii, cmd);
-}
-EXPORT_SYMBOL_GPL(usbnet_get_settings);
-
-int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd)
-{
-	struct usbnet *dev = netdev_priv(net);
-	int retval;
-
-	if (!dev->mii.mdio_write)
-		return -EOPNOTSUPP;
-
-	retval = mii_ethtool_sset(&dev->mii, cmd);
-
-	/* link speed/duplex might have changed */
-	if (dev->driver_info->link_reset)
-		dev->driver_info->link_reset(dev);
-
-	return retval;
-
-}
-EXPORT_SYMBOL_GPL(usbnet_set_settings);
-
-u32 usbnet_get_link (struct net_device *net)
-{
-	struct usbnet *dev = netdev_priv(net);
-
-	/* If a check_connect is defined, return its result */
-	if (dev->driver_info->check_connect)
-		return dev->driver_info->check_connect (dev) == 0;
-
-	/* if the device has mii operations, use those */
-	if (dev->mii.mdio_read)
-		return mii_link_ok(&dev->mii);
-
-	/* Otherwise, say we're up (to avoid breaking scripts) */
-	return 1;
-}
-EXPORT_SYMBOL_GPL(usbnet_get_link);
-
-int usbnet_nway_reset(struct net_device *net)
-{
-	struct usbnet *dev = netdev_priv(net);
-
-	if (!dev->mii.mdio_write)
-		return -EOPNOTSUPP;
-
-	return mii_nway_restart(&dev->mii);
-}
-EXPORT_SYMBOL_GPL(usbnet_nway_reset);
-
-#endif	/* HAVE_MII */
-
-void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
-{
-	struct usbnet *dev = netdev_priv(net);
-
-	strncpy (info->driver, dev->driver_name, sizeof info->driver);
-	strncpy (info->version, DRIVER_VERSION, sizeof info->version);
-	strncpy (info->fw_version, dev->driver_info->description,
-		sizeof info->fw_version);
-	usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
-}
-EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
-
-u32 usbnet_get_msglevel (struct net_device *net)
-{
-	struct usbnet *dev = netdev_priv(net);
-
-	return dev->msg_enable;
-}
-EXPORT_SYMBOL_GPL(usbnet_get_msglevel);
-
-void usbnet_set_msglevel (struct net_device *net, u32 level)
-{
-	struct usbnet *dev = netdev_priv(net);
-
-	dev->msg_enable = level;
-}
-EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
-
-/* drivers may override default ethtool_ops in their bind() routine */
-static struct ethtool_ops usbnet_ethtool_ops = {
-#ifdef	HAVE_MII
-	.get_settings		= usbnet_get_settings,
-	.set_settings		= usbnet_set_settings,
-	.get_link		= usbnet_get_link,
-	.nway_reset		= usbnet_nway_reset,
-#endif
-	.get_drvinfo		= usbnet_get_drvinfo,
-	.get_msglevel		= usbnet_get_msglevel,
-	.set_msglevel		= usbnet_set_msglevel,
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* work that cannot be done in interrupt context uses keventd.
- *
- * NOTE:  with 2.5 we could do more of this using completion callbacks,
- * especially now that control transfers can be queued.
- */
-static void
-kevent (struct work_struct *work)
-{
-	struct usbnet		*dev =
-		container_of(work, struct usbnet, kevent);
-	int			status;
-
-	/* usb_clear_halt() needs a thread context */
-	if (test_bit (EVENT_TX_HALT, &dev->flags)) {
-		unlink_urbs (dev, &dev->txq);
-		status = usb_clear_halt (dev->udev, dev->out);
-		if (status < 0
-				&& status != -EPIPE
-				&& status != -ESHUTDOWN) {
-			if (netif_msg_tx_err (dev))
-				deverr (dev, "can't clear tx halt, status %d",
-					status);
-		} else {
-			clear_bit (EVENT_TX_HALT, &dev->flags);
-			if (status != -ESHUTDOWN)
-				netif_wake_queue (dev->net);
-		}
-	}
-	if (test_bit (EVENT_RX_HALT, &dev->flags)) {
-		unlink_urbs (dev, &dev->rxq);
-		status = usb_clear_halt (dev->udev, dev->in);
-		if (status < 0
-				&& status != -EPIPE
-				&& status != -ESHUTDOWN) {
-			if (netif_msg_rx_err (dev))
-				deverr (dev, "can't clear rx halt, status %d",
-					status);
-		} else {
-			clear_bit (EVENT_RX_HALT, &dev->flags);
-			tasklet_schedule (&dev->bh);
-		}
-	}
-
-	/* tasklet could resubmit itself forever if memory is tight */
-	if (test_bit (EVENT_RX_MEMORY, &dev->flags)) {
-		struct urb	*urb = NULL;
-
-		if (netif_running (dev->net))
-			urb = usb_alloc_urb (0, GFP_KERNEL);
-		else
-			clear_bit (EVENT_RX_MEMORY, &dev->flags);
-		if (urb != NULL) {
-			clear_bit (EVENT_RX_MEMORY, &dev->flags);
-			rx_submit (dev, urb, GFP_KERNEL);
-			tasklet_schedule (&dev->bh);
-		}
-	}
-
-	if (test_bit (EVENT_LINK_RESET, &dev->flags)) {
-		struct driver_info	*info = dev->driver_info;
-		int			retval = 0;
-
-		clear_bit (EVENT_LINK_RESET, &dev->flags);
-		if(info->link_reset && (retval = info->link_reset(dev)) < 0) {
-			devinfo(dev, "link reset failed (%d) usbnet usb-%s-%s, %s",
-				retval,
-				dev->udev->bus->bus_name, dev->udev->devpath,
-				info->description);
-		}
-	}
-
-	if (dev->flags)
-		devdbg (dev, "kevent done, flags = 0x%lx",
-			dev->flags);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void tx_complete (struct urb *urb)
-{
-	struct sk_buff		*skb = (struct sk_buff *) urb->context;
-	struct skb_data		*entry = (struct skb_data *) skb->cb;
-	struct usbnet		*dev = entry->dev;
-
-	if (urb->status == 0) {
-		dev->stats.tx_packets++;
-		dev->stats.tx_bytes += entry->length;
-	} else {
-		dev->stats.tx_errors++;
-
-		switch (urb->status) {
-		case -EPIPE:
-			usbnet_defer_kevent (dev, EVENT_TX_HALT);
-			break;
-
-		/* software-driven interface shutdown */
-		case -ECONNRESET:		// async unlink
-		case -ESHUTDOWN:		// hardware gone
-			break;
-
-		// like rx, tx gets controller i/o faults during khubd delays
-		// and so it uses the same throttling mechanism.
-		case -EPROTO:
-		case -ETIME:
-		case -EILSEQ:
-			if (!timer_pending (&dev->delay)) {
-				mod_timer (&dev->delay,
-					jiffies + THROTTLE_JIFFIES);
-				if (netif_msg_link (dev))
-					devdbg (dev, "tx throttle %d",
-							urb->status);
-			}
-			netif_stop_queue (dev->net);
-			break;
-		default:
-			if (netif_msg_tx_err (dev))
-				devdbg (dev, "tx err %d", entry->urb->status);
-			break;
-		}
-	}
-
-	urb->dev = NULL;
-	entry->state = tx_done;
-	defer_bh(dev, skb, &dev->txq);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void usbnet_tx_timeout (struct net_device *net)
-{
-	struct usbnet		*dev = netdev_priv(net);
-
-	unlink_urbs (dev, &dev->txq);
-	tasklet_schedule (&dev->bh);
-
-	// FIXME: device recovery -- reset?
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net)
-{
-	struct usbnet		*dev = netdev_priv(net);
-	int			length;
-	int			retval = NET_XMIT_SUCCESS;
-	struct urb		*urb = NULL;
-	struct skb_data		*entry;
-	struct driver_info	*info = dev->driver_info;
-	unsigned long		flags;
-
-	// some devices want funky USB-level framing, for
-	// win32 driver (usually) and/or hardware quirks
-	if (info->tx_fixup) {
-		skb = info->tx_fixup (dev, skb, GFP_ATOMIC);
-		if (!skb) {
-			if (netif_msg_tx_err (dev))
-				devdbg (dev, "can't tx_fixup skb");
-			goto drop;
-		}
-	}
-	length = skb->len;
-
-	if (!(urb = usb_alloc_urb (0, GFP_ATOMIC))) {
-		if (netif_msg_tx_err (dev))
-			devdbg (dev, "no urb");
-		goto drop;
-	}
-
-	entry = (struct skb_data *) skb->cb;
-	entry->urb = urb;
-	entry->dev = dev;
-	entry->state = tx_start;
-	entry->length = length;
-
-	usb_fill_bulk_urb (urb, dev->udev, dev->out,
-			skb->data, skb->len, tx_complete, skb);
-
-	/* don't assume the hardware handles USB_ZERO_PACKET
-	 * NOTE:  strictly conforming cdc-ether devices should expect
-	 * the ZLP here, but ignore the one-byte packet.
-	 *
-	 * FIXME zero that byte, if it doesn't require a new skb.
-	 */
-	if ((length % dev->maxpacket) == 0)
-		urb->transfer_buffer_length++;
-
-	spin_lock_irqsave (&dev->txq.lock, flags);
-
-	switch ((retval = usb_submit_urb (urb, GFP_ATOMIC))) {
-	case -EPIPE:
-		netif_stop_queue (net);
-		usbnet_defer_kevent (dev, EVENT_TX_HALT);
-		break;
-	default:
-		if (netif_msg_tx_err (dev))
-			devdbg (dev, "tx: submit urb err %d", retval);
-		break;
-	case 0:
-		net->trans_start = jiffies;
-		__skb_queue_tail (&dev->txq, skb);
-		if (dev->txq.qlen >= TX_QLEN (dev))
-			netif_stop_queue (net);
-	}
-	spin_unlock_irqrestore (&dev->txq.lock, flags);
-
-	if (retval) {
-		if (netif_msg_tx_err (dev))
-			devdbg (dev, "drop, code %d", retval);
-drop:
-		retval = NET_XMIT_SUCCESS;
-		dev->stats.tx_dropped++;
-		if (skb)
-			dev_kfree_skb_any (skb);
-		usb_free_urb (urb);
-	} else if (netif_msg_tx_queued (dev)) {
-		devdbg (dev, "> tx, len %d, type 0x%x",
-			length, skb->protocol);
-	}
-	return retval;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-// tasklet (work deferred from completions, in_irq) or timer
-
-static void usbnet_bh (unsigned long param)
-{
-	struct usbnet		*dev = (struct usbnet *) param;
-	struct sk_buff		*skb;
-	struct skb_data		*entry;
-
-	while ((skb = skb_dequeue (&dev->done))) {
-		entry = (struct skb_data *) skb->cb;
-		switch (entry->state) {
-		    case rx_done:
-			entry->state = rx_cleanup;
-			rx_process (dev, skb);
-			continue;
-		    case tx_done:
-		    case rx_cleanup:
-			usb_free_urb (entry->urb);
-			dev_kfree_skb (skb);
-			continue;
-		    default:
-			devdbg (dev, "bogus skb state %d", entry->state);
-		}
-	}
-
-	// waiting for all pending urbs to complete?
-	if (dev->wait) {
-		if ((dev->txq.qlen + dev->rxq.qlen + dev->done.qlen) == 0) {
-			wake_up (dev->wait);
-		}
-
-	// or are we maybe short a few urbs?
-	} else if (netif_running (dev->net)
-			&& netif_device_present (dev->net)
-			&& !timer_pending (&dev->delay)
-			&& !test_bit (EVENT_RX_HALT, &dev->flags)) {
-		int	temp = dev->rxq.qlen;
-		int	qlen = RX_QLEN (dev);
-
-		if (temp < qlen) {
-			struct urb	*urb;
-			int		i;
-
-			// don't refill the queue all at once
-			for (i = 0; i < 10 && dev->rxq.qlen < qlen; i++) {
-				urb = usb_alloc_urb (0, GFP_ATOMIC);
-				if (urb != NULL)
-					rx_submit (dev, urb, GFP_ATOMIC);
-			}
-			if (temp != dev->rxq.qlen && netif_msg_link (dev))
-				devdbg (dev, "rxqlen %d --> %d",
-						temp, dev->rxq.qlen);
-			if (dev->rxq.qlen < qlen)
-				tasklet_schedule (&dev->bh);
-		}
-		if (dev->txq.qlen < TX_QLEN (dev))
-			netif_wake_queue (dev->net);
-	}
-}
-
-
-
-/*-------------------------------------------------------------------------
- *
- * USB Device Driver support
- *
- *-------------------------------------------------------------------------*/
-
-// precondition: never called in_interrupt
-
-void usbnet_disconnect (struct usb_interface *intf)
-{
-	struct usbnet		*dev;
-	struct usb_device	*xdev;
-	struct net_device	*net;
-
-	dev = usb_get_intfdata(intf);
-	usb_set_intfdata(intf, NULL);
-	if (!dev)
-		return;
-
-	xdev = interface_to_usbdev (intf);
-
-	if (netif_msg_probe (dev))
-		devinfo (dev, "unregister '%s' usb-%s-%s, %s",
-			intf->dev.driver->name,
-			xdev->bus->bus_name, xdev->devpath,
-			dev->driver_info->description);
-
-	net = dev->net;
-	unregister_netdev (net);
-
-	/* we don't hold rtnl here ... */
-	flush_scheduled_work ();
-
-	if (dev->driver_info->unbind)
-		dev->driver_info->unbind (dev, intf);
-
-	free_netdev(net);
-	usb_put_dev (xdev);
-}
-EXPORT_SYMBOL_GPL(usbnet_disconnect);
-
-
-/*-------------------------------------------------------------------------*/
-
-// precondition: never called in_interrupt
-
-int
-usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
-{
-	struct usbnet			*dev;
-	struct net_device		*net;
-	struct usb_host_interface	*interface;
-	struct driver_info		*info;
-	struct usb_device		*xdev;
-	int				status;
-	const char			*name;
-
-	name = udev->dev.driver->name;
-	info = (struct driver_info *) prod->driver_info;
-	if (!info) {
-		dev_dbg (&udev->dev, "blacklisted by %s\n", name);
-		return -ENODEV;
-	}
-	xdev = interface_to_usbdev (udev);
-	interface = udev->cur_altsetting;
-
-	usb_get_dev (xdev);
-
-	status = -ENOMEM;
-
-	// set up our own records
-	net = alloc_etherdev(sizeof(*dev));
-	if (!net) {
-		dbg ("can't kmalloc dev");
-		goto out;
-	}
-
-	dev = netdev_priv(net);
-	dev->udev = xdev;
-	dev->driver_info = info;
-	dev->driver_name = name;
-	dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
-				| NETIF_MSG_PROBE | NETIF_MSG_LINK);
-	skb_queue_head_init (&dev->rxq);
-	skb_queue_head_init (&dev->txq);
-	skb_queue_head_init (&dev->done);
-	dev->bh.func = usbnet_bh;
-	dev->bh.data = (unsigned long) dev;
-	INIT_WORK (&dev->kevent, kevent);
-	dev->delay.function = usbnet_bh;
-	dev->delay.data = (unsigned long) dev;
-	init_timer (&dev->delay);
-	mutex_init (&dev->phy_mutex);
-
-	SET_MODULE_OWNER (net);
-	dev->net = net;
-	strcpy (net->name, "usb%d");
-	memcpy (net->dev_addr, node_id, sizeof node_id);
-
-	/* rx and tx sides can use different message sizes;
-	 * bind() should set rx_urb_size in that case.
-	 */
-	dev->hard_mtu = net->mtu + net->hard_header_len;
-#if 0
-// dma_supported() is deeply broken on almost all architectures
-	// possible with some EHCI controllers
-	if (dma_supported (&udev->dev, DMA_64BIT_MASK))
-		net->features |= NETIF_F_HIGHDMA;
-#endif
-
-	net->change_mtu = usbnet_change_mtu;
-	net->get_stats = usbnet_get_stats;
-	net->hard_start_xmit = usbnet_start_xmit;
-	net->open = usbnet_open;
-	net->stop = usbnet_stop;
-	net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
-	net->tx_timeout = usbnet_tx_timeout;
-	net->ethtool_ops = &usbnet_ethtool_ops;
-
-	// allow device-specific bind/init procedures
-	// NOTE net->name still not usable ...
-	if (info->bind) {
-		status = info->bind (dev, udev);
-		if (status < 0)
-			goto out1;
-
-		// heuristic:  "usb%d" for links we know are two-host,
-		// else "eth%d" when there's reasonable doubt.  userspace
-		// can rename the link if it knows better.
-		if ((dev->driver_info->flags & FLAG_ETHER) != 0
-				&& (net->dev_addr [0] & 0x02) == 0)
-			strcpy (net->name, "eth%d");
-
-		/* maybe the remote can't receive an Ethernet MTU */
-		if (net->mtu > (dev->hard_mtu - net->hard_header_len))
-			net->mtu = dev->hard_mtu - net->hard_header_len;
-	} else if (!info->in || !info->out)
-		status = usbnet_get_endpoints (dev, udev);
-	else {
-		dev->in = usb_rcvbulkpipe (xdev, info->in);
-		dev->out = usb_sndbulkpipe (xdev, info->out);
-		if (!(info->flags & FLAG_NO_SETINT))
-			status = usb_set_interface (xdev,
-				interface->desc.bInterfaceNumber,
-				interface->desc.bAlternateSetting);
-		else
-			status = 0;
-
-	}
-	if (status == 0 && dev->status)
-		status = init_status (dev, udev);
-	if (status < 0)
-		goto out3;
-
-	if (!dev->rx_urb_size)
-		dev->rx_urb_size = dev->hard_mtu;
-	dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
-
-	SET_NETDEV_DEV(net, &udev->dev);
-	status = register_netdev (net);
-	if (status)
-		goto out3;
-	if (netif_msg_probe (dev))
-		devinfo (dev, "register '%s' at usb-%s-%s, %s, "
-				"%02x:%02x:%02x:%02x:%02x:%02x",
-			udev->dev.driver->name,
-			xdev->bus->bus_name, xdev->devpath,
-			dev->driver_info->description,
-			net->dev_addr [0], net->dev_addr [1],
-			net->dev_addr [2], net->dev_addr [3],
-			net->dev_addr [4], net->dev_addr [5]);
-
-	// ok, it's ready to go.
-	usb_set_intfdata (udev, dev);
-
-	// start as if the link is up
-	netif_device_attach (net);
-
-	return 0;
-
-out3:
-	if (info->unbind)
-		info->unbind (dev, udev);
-out1:
-	free_netdev(net);
-out:
-	usb_put_dev(xdev);
-	return status;
-}
-EXPORT_SYMBOL_GPL(usbnet_probe);
-
-/*-------------------------------------------------------------------------*/
-
-/* FIXME these suspend/resume methods assume non-CDC style
- * devices, with only one interface.
- */
-
-int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
-{
-	struct usbnet		*dev = usb_get_intfdata(intf);
-
-	/* accelerate emptying of the rx and queues, to avoid
-	 * having everything error out.
-	 */
-	netif_device_detach (dev->net);
-	(void) unlink_urbs (dev, &dev->rxq);
-	(void) unlink_urbs (dev, &dev->txq);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(usbnet_suspend);
-
-int usbnet_resume (struct usb_interface *intf)
-{
-	struct usbnet		*dev = usb_get_intfdata(intf);
-
-	netif_device_attach (dev->net);
-	tasklet_schedule (&dev->bh);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(usbnet_resume);
-
-
-/*-------------------------------------------------------------------------*/
-
-static int __init usbnet_init(void)
-{
-	/* compiler should optimize this out */
-	BUILD_BUG_ON (sizeof (((struct sk_buff *)0)->cb)
-			< sizeof (struct skb_data));
-
-	random_ether_addr(node_id);
-	return 0;
-}
-module_init(usbnet_init);
-
-static void __exit usbnet_exit(void)
-{
-}
-module_exit(usbnet_exit);
-
-MODULE_AUTHOR("David Brownell");
-MODULE_DESCRIPTION("USB network driver framework");
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/net/usbnet.h b/drivers/usb/net/usbnet.h
deleted file mode 100644
index 82db5a8e528..00000000000
--- a/drivers/usb/net/usbnet.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * USB Networking Link Interface
- *
- * Copyright (C) 2000-2005 by David Brownell <dbrownell@users.sourceforge.net>
- * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-
-#ifndef	__USBNET_H
-#define	__USBNET_H
-
-
-/* interface from usbnet core to each USB networking link we handle */
-struct usbnet {
-	/* housekeeping */
-	struct usb_device	*udev;
-	struct driver_info	*driver_info;
-	const char		*driver_name;
-	wait_queue_head_t	*wait;
-	struct mutex		phy_mutex;
-
-	/* i/o info: pipes etc */
-	unsigned		in, out;
-	struct usb_host_endpoint *status;
-	unsigned		maxpacket;
-	struct timer_list	delay;
-
-	/* protocol/interface state */
-	struct net_device	*net;
-	struct net_device_stats	stats;
-	int			msg_enable;
-	unsigned long		data [5];
-	u32			xid;
-	u32			hard_mtu;	/* count any extra framing */
-	size_t		        rx_urb_size;    /* size for rx urbs  */
-	struct mii_if_info	mii;
-
-	/* various kinds of pending driver work */
-	struct sk_buff_head	rxq;
-	struct sk_buff_head	txq;
-	struct sk_buff_head	done;
-	struct urb		*interrupt;
-	struct tasklet_struct	bh;
-
-	struct work_struct	kevent;
-	unsigned long		flags;
-#		define EVENT_TX_HALT	0
-#		define EVENT_RX_HALT	1
-#		define EVENT_RX_MEMORY	2
-#		define EVENT_STS_SPLIT	3
-#		define EVENT_LINK_RESET	4
-};
-
-static inline struct usb_driver *driver_of(struct usb_interface *intf)
-{
-	return to_usb_driver(intf->dev.driver);
-}
-
-/* interface from the device/framing level "minidriver" to core */
-struct driver_info {
-	char		*description;
-
-	int		flags;
-/* framing is CDC Ethernet, not writing ZLPs (hw issues), or optionally: */
-#define FLAG_FRAMING_NC	0x0001		/* guard against device dropouts */
-#define FLAG_FRAMING_GL	0x0002		/* genelink batches packets */
-#define FLAG_FRAMING_Z	0x0004		/* zaurus adds a trailer */
-#define FLAG_FRAMING_RN	0x0008		/* RNDIS batches, plus huge header */
-
-#define FLAG_NO_SETINT	0x0010		/* device can't set_interface() */
-#define FLAG_ETHER	0x0020		/* maybe use "eth%d" names */
-
-#define FLAG_FRAMING_AX 0x0040          /* AX88772/178 packets */
-
-	/* init device ... can sleep, or cause probe() failure */
-	int	(*bind)(struct usbnet *, struct usb_interface *);
-
-	/* cleanup device ... can sleep, but can't fail */
-	void	(*unbind)(struct usbnet *, struct usb_interface *);
-
-	/* reset device ... can sleep */
-	int	(*reset)(struct usbnet *);
-
-	/* see if peer is connected ... can sleep */
-	int	(*check_connect)(struct usbnet *);
-
-	/* for status polling */
-	void	(*status)(struct usbnet *, struct urb *);
-
-	/* link reset handling, called from defer_kevent */
-	int	(*link_reset)(struct usbnet *);
-
-	/* fixup rx packet (strip framing) */
-	int	(*rx_fixup)(struct usbnet *dev, struct sk_buff *skb);
-
-	/* fixup tx packet (add framing) */
-	struct sk_buff	*(*tx_fixup)(struct usbnet *dev,
-				struct sk_buff *skb, gfp_t flags);
-
-	/* for new devices, use the descriptor-reading code instead */
-	int		in;		/* rx endpoint */
-	int		out;		/* tx endpoint */
-
-	unsigned long	data;		/* Misc driver specific data */
-};
-
-/* Minidrivers are just drivers using the "usbnet" core as a powerful
- * network-specific subroutine library ... that happens to do pretty
- * much everything except custom framing and chip-specific stuff.
- */
-extern int usbnet_probe(struct usb_interface *, const struct usb_device_id *);
-extern int usbnet_suspend (struct usb_interface *, pm_message_t );
-extern int usbnet_resume (struct usb_interface *);
-extern void usbnet_disconnect(struct usb_interface *);
-
-
-/* Drivers that reuse some of the standard USB CDC infrastructure
- * (notably, using multiple interfaces according to the CDC
- * union descriptor) get some helper code.
- */
-struct cdc_state {
-	struct usb_cdc_header_desc	*header;
-	struct usb_cdc_union_desc	*u;
-	struct usb_cdc_ether_desc	*ether;
-	struct usb_interface		*control;
-	struct usb_interface		*data;
-};
-
-extern int usbnet_generic_cdc_bind (struct usbnet *, struct usb_interface *);
-extern void usbnet_cdc_unbind (struct usbnet *, struct usb_interface *);
-
-/* CDC and RNDIS support the same host-chosen packet filters for IN transfers */
-#define	DEFAULT_FILTER	(USB_CDC_PACKET_TYPE_BROADCAST \
- 			|USB_CDC_PACKET_TYPE_ALL_MULTICAST \
- 			|USB_CDC_PACKET_TYPE_PROMISCUOUS \
- 			|USB_CDC_PACKET_TYPE_DIRECTED)
-
-
-/* we record the state for each of our queued skbs */
-enum skb_state {
-	illegal = 0,
-	tx_start, tx_done,
-	rx_start, rx_done, rx_cleanup
-};
-
-struct skb_data {	/* skb->cb is one of these */
-	struct urb		*urb;
-	struct usbnet		*dev;
-	enum skb_state		state;
-	size_t			length;
-};
-
-
-extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
-extern void usbnet_defer_kevent (struct usbnet *, int);
-extern void usbnet_skb_return (struct usbnet *, struct sk_buff *);
-extern void usbnet_unlink_rx_urbs(struct usbnet *);
-
-extern int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd);
-extern int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd);
-extern u32 usbnet_get_link (struct net_device *net);
-extern u32 usbnet_get_msglevel (struct net_device *);
-extern void usbnet_set_msglevel (struct net_device *, u32);
-extern void usbnet_get_drvinfo (struct net_device *, struct ethtool_drvinfo *);
-extern int usbnet_nway_reset(struct net_device *net);
-
-/* messaging support includes the interface name, so it must not be
- * used before it has one ... notably, in minidriver bind() calls.
- */
-#ifdef DEBUG
-#define devdbg(usbnet, fmt, arg...) \
-	printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
-#else
-#define devdbg(usbnet, fmt, arg...) do {} while(0)
-#endif
-
-#define deverr(usbnet, fmt, arg...) \
-	printk(KERN_ERR "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
-#define devwarn(usbnet, fmt, arg...) \
-	printk(KERN_WARNING "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
-
-#define devinfo(usbnet, fmt, arg...) \
-	printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net->name , ## arg); \
-
-
-#endif	/* __USBNET_H */
diff --git a/drivers/usb/net/zaurus.c b/drivers/usb/net/zaurus.c
deleted file mode 100644
index 9f98e8ce487..00000000000
--- a/drivers/usb/net/zaurus.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
- * Copyright (C) 2002-2005 by David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-// #define	DEBUG			// error path messages, extra info
-// #define	VERBOSE			// more; success messages
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/ethtool.h>
-#include <linux/workqueue.h>
-#include <linux/mii.h>
-#include <linux/crc32.h>
-#include <linux/usb.h>
-#include <linux/usb/cdc.h>
-
-#include "usbnet.h"
-
-
-/*
- * All known Zaurii lie about their standards conformance.  At least
- * the earliest SA-1100 models lie by saying they support CDC Ethernet.
- * Some later models (especially PXA-25x and PXA-27x based ones) lie
- * and say they support CDC MDLM (for access to cell phone modems).
- *
- * There are non-Zaurus products that use these same protocols too.
- *
- * The annoying thing is that at the same time Sharp was developing
- * that annoying standards-breaking software, the Linux community had
- * a simple "CDC Subset" working reliably on the same SA-1100 hardware.
- * That is, the same functionality but not violating standards.
- *
- * The CDC Ethernet nonconformance points are troublesome to hosts
- * with a true CDC Ethernet implementation:
- *   - Framing appends a CRC, which the spec says drivers "must not" do;
- *   - Transfers data in altsetting zero, instead of altsetting 1;
- *   - All these peripherals use the same ethernet address.
- *
- * The CDC MDLM nonconformance is less immediately troublesome, since all
- * MDLM implementations are quasi-proprietary anyway.
- */
-
-static struct sk_buff *
-zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
-{
-	int			padlen;
-	struct sk_buff		*skb2;
-
-	padlen = 2;
-	if (!skb_cloned(skb)) {
-		int	tailroom = skb_tailroom(skb);
-		if ((padlen + 4) <= tailroom)
-			goto done;
-	}
-	skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags);
-	dev_kfree_skb_any(skb);
-	skb = skb2;
-	if (skb) {
-		u32		fcs;
-done:
-		fcs = crc32_le(~0, skb->data, skb->len);
-		fcs = ~fcs;
-
-		*skb_put (skb, 1) = fcs       & 0xff;
-		*skb_put (skb, 1) = (fcs>> 8) & 0xff;
-		*skb_put (skb, 1) = (fcs>>16) & 0xff;
-		*skb_put (skb, 1) = (fcs>>24) & 0xff;
-	}
-	return skb;
-}
-
-static int zaurus_bind(struct usbnet *dev, struct usb_interface *intf)
-{
-	/* Belcarra's funky framing has other options; mostly
-	 * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes.
-	 */
-	dev->net->hard_header_len += 6;
-	dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
-	return usbnet_generic_cdc_bind(dev, intf);
-}
-
-/* PDA style devices are always connected if present */
-static int always_connected (struct usbnet *dev)
-{
-	return 0;
-}
-
-static const struct driver_info	zaurus_sl5x00_info = {
-	.description =	"Sharp Zaurus SL-5x00",
-	.flags =	FLAG_FRAMING_Z,
-	.check_connect = always_connected,
-	.bind =		zaurus_bind,
-	.unbind =	usbnet_cdc_unbind,
-	.tx_fixup =	zaurus_tx_fixup,
-};
-#define	ZAURUS_STRONGARM_INFO	((unsigned long)&zaurus_sl5x00_info)
-
-static const struct driver_info	zaurus_pxa_info = {
-	.description =	"Sharp Zaurus, PXA-2xx based",
-	.flags =	FLAG_FRAMING_Z,
-	.check_connect = always_connected,
-	.bind =		zaurus_bind,
-	.unbind =	usbnet_cdc_unbind,
-	.tx_fixup =	zaurus_tx_fixup,
-};
-#define	ZAURUS_PXA_INFO		((unsigned long)&zaurus_pxa_info)
-
-static const struct driver_info	olympus_mxl_info = {
-	.description =	"Olympus R1000",
-	.flags =	FLAG_FRAMING_Z,
-	.check_connect = always_connected,
-	.bind =		zaurus_bind,
-	.unbind =	usbnet_cdc_unbind,
-	.tx_fixup =	zaurus_tx_fixup,
-};
-#define	OLYMPUS_MXL_INFO	((unsigned long)&olympus_mxl_info)
-
-
-/* Some more recent products using Lineo/Belcarra code will wrongly claim
- * CDC MDLM conformance.  They aren't conformant:  data endpoints live
- * in the control interface, there's no data interface, and it's not used
- * to talk to a cell phone radio.  But at least we can detect these two
- * pseudo-classes, rather than growing this product list with entries for
- * each new nonconformant product (sigh).
- */
-static const u8 safe_guid[16] = {
-	0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
-	0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
-};
-static const u8 blan_guid[16] = {
-	0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70,
-	0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37,
-};
-
-static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf)
-{
-	u8				*buf = intf->cur_altsetting->extra;
-	int				len = intf->cur_altsetting->extralen;
-	struct usb_cdc_mdlm_desc	*desc = NULL;
-	struct usb_cdc_mdlm_detail_desc	*detail = NULL;
-
-	while (len > 3) {
-		if (buf [1] != USB_DT_CS_INTERFACE)
-			goto next_desc;
-
-		/* use bDescriptorSubType, and just verify that we get a
-		 * "BLAN" (or "SAFE") descriptor.
-		 */
-		switch (buf [2]) {
-		case USB_CDC_MDLM_TYPE:
-			if (desc) {
-				dev_dbg(&intf->dev, "extra MDLM\n");
-				goto bad_desc;
-			}
-			desc = (void *) buf;
-			if (desc->bLength != sizeof *desc) {
-				dev_dbg(&intf->dev, "MDLM len %u\n",
-					desc->bLength);
-				goto bad_desc;
-			}
-			/* expect bcdVersion 1.0, ignore */
-			if (memcmp(&desc->bGUID, blan_guid, 16)
-				    && memcmp(&desc->bGUID, safe_guid, 16) ) {
-				/* hey, this one might _really_ be MDLM! */
-				dev_dbg(&intf->dev, "MDLM guid\n");
-				goto bad_desc;
-			}
-			break;
-		case USB_CDC_MDLM_DETAIL_TYPE:
-			if (detail) {
-				dev_dbg(&intf->dev, "extra MDLM detail\n");
-				goto bad_desc;
-			}
-			detail = (void *) buf;
-			switch (detail->bGuidDescriptorType) {
-			case 0:			/* "SAFE" */
-				if (detail->bLength != (sizeof *detail + 2))
-					goto bad_detail;
-				break;
-			case 1:			/* "BLAN" */
-				if (detail->bLength != (sizeof *detail + 3))
-					goto bad_detail;
-				break;
-			default:
-				goto bad_detail;
-			}
-
-			/* assuming we either noticed BLAN already, or will
-			 * find it soon, there are some data bytes here:
-			 *  - bmNetworkCapabilities (unused)
-			 *  - bmDataCapabilities (bits, see below)
-			 *  - bPad (ignored, for PADAFTER -- BLAN-only)
-			 * bits are:
-			 *  - 0x01 -- Zaurus framing (add CRC)
-			 *  - 0x02 -- PADBEFORE (CRC includes some padding)
-			 *  - 0x04 -- PADAFTER (some padding after CRC)
-			 *  - 0x08 -- "fermat" packet mangling (for hw bugs)
-			 * the PADBEFORE appears not to matter; we interop
-			 * with devices that use it and those that don't.
-			 */
-			if ((detail->bDetailData[1] & ~0x02) != 0x01) {
-				/* bmDataCapabilities == 0 would be fine too,
-				 * but framing is minidriver-coupled for now.
-				 */
-bad_detail:
-				dev_dbg(&intf->dev,
-						"bad MDLM detail, %d %d %d\n",
-						detail->bLength,
-						detail->bDetailData[0],
-						detail->bDetailData[2]);
-				goto bad_desc;
-			}
-
-			/* same extra framing as for non-BLAN mode */
-			dev->net->hard_header_len += 6;
-			dev->rx_urb_size = dev->net->hard_header_len
-					+ dev->net->mtu;
-			break;
-		}
-next_desc:
-		len -= buf [0];	/* bLength */
-		buf += buf [0];
-	}
-
-	if (!desc || !detail) {
-		dev_dbg(&intf->dev, "missing cdc mdlm %s%sdescriptor\n",
-			desc ? "" : "func ",
-			detail ? "" : "detail ");
-		goto bad_desc;
-	}
-
-	/* There's probably a CDC Ethernet descriptor there, but we can't
-	 * rely on the Ethernet address it provides since not all vendors
-	 * bother to make it unique.  Likewise there's no point in tracking
-	 * of the CDC event notifications.
-	 */
-	return usbnet_get_endpoints(dev, intf);
-
-bad_desc:
-	dev_info(&dev->udev->dev, "unsupported MDLM descriptors\n");
-	return -ENODEV;
-}
-
-static const struct driver_info	bogus_mdlm_info = {
-	.description =	"pseudo-MDLM (BLAN) device",
-	.flags =	FLAG_FRAMING_Z,
-	.check_connect = always_connected,
-	.tx_fixup =	zaurus_tx_fixup,
-	.bind =		blan_mdlm_bind,
-};
-
-static const struct usb_device_id	products [] = {
-#define	ZAURUS_MASTER_INTERFACE \
-	.bInterfaceClass	= USB_CLASS_COMM, \
-	.bInterfaceSubClass	= USB_CDC_SUBCLASS_ETHERNET, \
-	.bInterfaceProtocol	= USB_CDC_PROTO_NONE
-
-/* SA-1100 based Sharp Zaurus ("collie"), or compatible. */
-{
-	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
-			  | USB_DEVICE_ID_MATCH_DEVICE,
-	.idVendor		= 0x04DD,
-	.idProduct		= 0x8004,
-	ZAURUS_MASTER_INTERFACE,
-	.driver_info = ZAURUS_STRONGARM_INFO,
-},
-
-/* PXA-2xx based models are also lying-about-cdc.  If you add any
- * more devices that claim to be CDC Ethernet, make sure they get
- * added to the blacklist in cdc_ether too.
- *
- * NOTE:  OpenZaurus versions with 2.6 kernels won't use these entries,
- * unlike the older ones with 2.4 "embedix" kernels.
- */
-{
-	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
-			  | USB_DEVICE_ID_MATCH_DEVICE,
-	.idVendor		= 0x04DD,
-	.idProduct		= 0x8005,	/* A-300 */
-	ZAURUS_MASTER_INTERFACE,
-	.driver_info = ZAURUS_PXA_INFO,
-}, {
-	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
-			  | USB_DEVICE_ID_MATCH_DEVICE,
-	.idVendor		= 0x04DD,
-	.idProduct		= 0x8006,	/* B-500/SL-5600 */
-	ZAURUS_MASTER_INTERFACE,
-	.driver_info = ZAURUS_PXA_INFO,
-}, {
-	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
-	          | USB_DEVICE_ID_MATCH_DEVICE,
-	.idVendor		= 0x04DD,
-	.idProduct		= 0x8007,	/* C-700 */
-	ZAURUS_MASTER_INTERFACE,
-	.driver_info = ZAURUS_PXA_INFO,
-}, {
-	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
-		 | USB_DEVICE_ID_MATCH_DEVICE,
-	.idVendor               = 0x04DD,
-	.idProduct              = 0x9031,	/* C-750 C-760 */
-	ZAURUS_MASTER_INTERFACE,
-	.driver_info = ZAURUS_PXA_INFO,
-}, {
-	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
-		 | USB_DEVICE_ID_MATCH_DEVICE,
-	.idVendor               = 0x04DD,
-	.idProduct              = 0x9032,	/* SL-6000 */
-	ZAURUS_MASTER_INTERFACE,
-	.driver_info = ZAURUS_PXA_INFO,
-}, {
-	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
-		 | USB_DEVICE_ID_MATCH_DEVICE,
-	.idVendor               = 0x04DD,
-	/* reported with some C860 units */
-	.idProduct              = 0x9050,	/* C-860 */
-	ZAURUS_MASTER_INTERFACE,
-	.driver_info = ZAURUS_PXA_INFO,
-},
-
-
-/* At least some of the newest PXA units have very different lies about
- * their standards support:  they claim to be cell phones offering
- * direct access to their radios!  (No, they don't conform to CDC MDLM.)
- */
-{
-	USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
-			USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &bogus_mdlm_info,
-},
-
-/* Olympus has some models with a Zaurus-compatible option.
- * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
- */
-{
-	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
-		 | USB_DEVICE_ID_MATCH_DEVICE,
-	.idVendor               = 0x07B4,
-	.idProduct              = 0x0F02,	/* R-1000 */
-	ZAURUS_MASTER_INTERFACE,
-	.driver_info = OLYMPUS_MXL_INFO,
-},
-	{ },		// END
-};
-MODULE_DEVICE_TABLE(usb, products);
-
-static struct usb_driver zaurus_driver = {
-	.name =		"zaurus",
-	.id_table =	products,
-	.probe =	usbnet_probe,
-	.disconnect =	usbnet_disconnect,
-	.suspend =	usbnet_suspend,
-	.resume =	usbnet_resume,
-};
-
-static int __init zaurus_init(void)
-{
-	return usb_register(&zaurus_driver);
-}
-module_init(zaurus_init);
-
-static void __exit zaurus_exit(void)
-{
-	usb_deregister(&zaurus_driver);
-}
-module_exit(zaurus_exit);
-
-MODULE_AUTHOR("Pavel Machek, David Brownell");
-MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products");
-MODULE_LICENSE("GPL");