tree-wide: fix comment/printk typos

"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

8 files changed, 9 insertions, 9 deletions

diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index ed0266462c5..1f8084d59a4 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1316,7 +1316,7 @@ static struct imx_udc_struct controller = {
 };
 
 /*******************************************************************************
- * USB gadged driver functions
+ * USB gadget driver functions
  *******************************************************************************
  */
 int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index e49b75a7800..f90d003f230 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1658,7 +1658,7 @@ static int imx21_hc_reset(struct usb_hcd *hcd)
 
 	spin_lock_irqsave(&imx21->lock, flags);
 
-	/* Reset the Host controler modules */
+	/* Reset the Host controller modules */
 	writel(USBOTG_RST_RSTCTRL | USBOTG_RST_RSTRH |
 		USBOTG_RST_RSTHSIE | USBOTG_RST_RSTHC,
 		imx21->regs + USBOTG_RST_CTRL);
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 32149be4ad8..e0cb12b573f 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3094,7 +3094,7 @@ static int oxu_hub_status_data(struct usb_hcd *hcd, char *buf)
 
 	/* Some boards (mostly VIA?) report bogus overcurrent indications,
 	 * causing massive log spam unless we completely ignore them.  It
-	 * may be relevant that VIA VT8235 controlers, where PORT_POWER is
+	 * may be relevant that VIA VT8235 controllers, where PORT_POWER is
 	 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
 	 * PORT_POWER; that's surprising, but maybe within-spec.
 	 */
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index 44f8b922505..a6afd15f6a4 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -717,7 +717,7 @@ static int adu_probe(struct usb_interface *interface,
 		goto exit;
 	}
 
-	/* allocate memory for our device state and intialize it */
+	/* allocate memory for our device state and initialize it */
 	dev = kzalloc(sizeof(struct adu_device), GFP_KERNEL);
 	if (dev == NULL) {
 		dev_err(&interface->dev, "Out of memory\n");
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 37566419877..7a10e48b78f 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -768,7 +768,7 @@ static int iowarrior_probe(struct usb_interface *interface,
 	int i;
 	int retval = -ENOMEM;
 
-	/* allocate memory for our device state and intialize it */
+	/* allocate memory for our device state and initialize it */
 	dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
 	if (dev == NULL) {
 		dev_err(&interface->dev, "Out of memory\n");
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index edffef64233..eefb8275bb7 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -642,7 +642,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *
 	int i;
 	int retval = -ENOMEM;
 
-	/* allocate memory for our device state and intialize it */
+	/* allocate memory for our device state and initialize it */
 
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (dev == NULL) {
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 5d815049cba..1cbeaa17fff 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1636,7 +1636,7 @@ static inline void __init musb_g_init_endpoints(struct musb *musb)
 	struct musb_hw_ep	*hw_ep;
 	unsigned		count = 0;
 
-	/* intialize endpoint list just once */
+	/* initialize endpoint list just once */
 	INIT_LIST_HEAD(&(musb->g.ep_list));
 
 	for (epnum = 0, hw_ep = musb->endpoints;
@@ -1715,7 +1715,7 @@ void musb_gadget_cleanup(struct musb *musb)
  *
  * -EINVAL something went wrong (not driver)
  * -EBUSY another gadget is already using the controller
- * -ENOMEM no memeory to perform the operation
+ * -ENOMEM no memory to perform the operation
  *
  * @param driver the gadget driver
  * @param bind the driver's bind function
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c
index c7b1d8108de..8cb9d80207f 100644
--- a/drivers/usb/wusbcore/wa-rpipe.c
+++ b/drivers/usb/wusbcore/wa-rpipe.c
@@ -49,7 +49,7 @@
  *
  *  USB Stack port number    4 (1 based)
  *  WUSB code port index     3 (0 based)
- *  USB Addresss             5 (2 based -- 0 is for default, 1 for root hub)
+ *  USB Address             5 (2 based -- 0 is for default, 1 for root hub)
  *
  *  Now, because we don't use the concept as default address exactly
  *  like the (wired) USB code does, we need to kind of skip it. So we