Staging: Merge 2.6.37-rc5 into staging-next

This was done to handle a number of conflicts in the batman-adv
and winbond drivers properly.  It also now allows us to fix up the sysfs
attributes properly that were not in the .37 release due to them being
only in this tree at the time.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

39 files changed, 489 insertions, 101 deletions

diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index ea071a5b6ee..44447f54942 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -2301,7 +2301,7 @@ out:
 	return ret;
 }
 
-static DEVICE_ATTR(stat_status, S_IWUGO | S_IRUGO, read_status, reboot);
+static DEVICE_ATTR(stat_status, S_IWUSR | S_IRUGO, read_status, reboot);
 
 static ssize_t read_human_status(struct device *dev,
 			struct device_attribute *attr, char *buf)
@@ -2364,8 +2364,7 @@ out:
 	return ret;
 }
 
-static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO,
-				read_human_status, NULL);
+static DEVICE_ATTR(stat_human_status, S_IRUGO, read_human_status, NULL);
 
 static ssize_t read_delin(struct device *dev, struct device_attribute *attr,
 		char *buf)
@@ -2397,7 +2396,7 @@ out:
 	return ret;
 }
 
-static DEVICE_ATTR(stat_delin, S_IWUGO | S_IRUGO, read_delin, NULL);
+static DEVICE_ATTR(stat_delin, S_IRUGO, read_delin, NULL);
 
 #define UEA_ATTR(name, reset)					\
 								\
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index ddb4dc98092..a3d2e239965 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -54,7 +54,6 @@
 #include <linux/gfp.h>
 #include <linux/poll.h>
 #include <linux/usb.h>
-#include <linux/smp_lock.h>
 #include <linux/usbdevice_fs.h>
 #include <linux/usb/hcd.h>
 #include <linux/mutex.h>
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 045bb4b823e..a7131ad630f 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -37,7 +37,6 @@
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/signal.h>
 #include <linux/poll.h>
 #include <linux/module.h>
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 9fe34fb78ef..cf6a5423de0 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -19,7 +19,6 @@
 #include <linux/errno.h>
 #include <linux/rwsem.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/usb.h>
 
 #include "usb.h"
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 61800f77dac..ced846ac414 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1330,6 +1330,8 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 	 */
 
 	if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+		if (hcd->self.uses_pio_for_control)
+			return ret;
 		if (hcd->self.uses_dma) {
 			urb->setup_dma = dma_map_single(
 					hcd->self.controller,
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 9819a4cc3b2..b690aa35df9 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -39,7 +39,6 @@
 #include <linux/parser.h>
 #include <linux/notifier.h>
 #include <linux/seq_file.h>
-#include <linux/smp_lock.h>
 #include <linux/usb/hcd.h>
 #include <asm/byteorder.h>
 #include "usb.h"
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index b5e20e873cb..717ff653fa2 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -2017,7 +2017,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 			}
 		} else {
 			/* gpio_request fail so use -EINVAL for gpio_is_valid */
-			ubc->vbus_pin = -EINVAL;
+			udc->vbus_pin = -EINVAL;
 		}
 	}
 
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 4a830df4fc3..484c5ba5450 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -30,7 +30,6 @@
 #include <linux/blkdev.h>
 #include <linux/pagemap.h>
 #include <asm/unaligned.h>
-#include <linux/smp_lock.h>
 
 #include <linux/usb/composite.h>
 #include <linux/usb/functionfs.h>
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 4f891eddd06..598e7e2ab80 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -25,7 +25,6 @@
 #include <linux/cdev.h>
 #include <linux/mutex.h>
 #include <linux/poll.h>
-#include <linux/smp_lock.h>
 #include <linux/uaccess.h>
 #include <linux/wait.h>
 #include <linux/usb/g_hid.h>
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 86afdc73322..6e2599661b5 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -1067,7 +1067,7 @@ static inline void create_debug_files (struct ehci_hcd *ehci)
 						    &debug_registers_fops))
 		goto file_error;
 
-	if (!debugfs_create_file("lpm", S_IRUGO|S_IWUGO, ehci->debug_dir, bus,
+	if (!debugfs_create_file("lpm", S_IRUGO|S_IWUSR, ehci->debug_dir, bus,
 						    &debug_lpm_fops))
 		goto file_error;
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 502a7e6fef4..e9062806d4a 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1063,10 +1063,11 @@ rescan:
 				tmp && tmp != qh;
 				tmp = tmp->qh_next.qh)
 			continue;
-		/* periodic qh self-unlinks on empty */
-		if (!tmp)
-			goto nogood;
-		unlink_async (ehci, qh);
+		/* periodic qh self-unlinks on empty, and a COMPLETING qh
+		 * may already be unlinked.
+		 */
+		if (tmp)
+			unlink_async(ehci, qh);
 		/* FALL THROUGH */
 	case QH_STATE_UNLINK:		/* wait for hw to finish? */
 	case QH_STATE_UNLINK_WAIT:
@@ -1083,7 +1084,6 @@ idle_timeout:
 		}
 		/* else FALL THROUGH */
 	default:
-nogood:
 		/* caller was supposed to have unlinked any requests;
 		 * that's not our job.  just leak this memory.
 		 */
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index d36e4e75e08..12f70c302b0 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -141,6 +141,10 @@ static void ehci_mem_cleanup (struct ehci_hcd *ehci)
 		qh_put (ehci->async);
 	ehci->async = NULL;
 
+	if (ehci->dummy)
+		qh_put(ehci->dummy);
+	ehci->dummy = NULL;
+
 	/* DMA consistent memory and pools */
 	if (ehci->qtd_pool)
 		dma_pool_destroy (ehci->qtd_pool);
@@ -227,8 +231,26 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags)
 	if (ehci->periodic == NULL) {
 		goto fail;
 	}
-	for (i = 0; i < ehci->periodic_size; i++)
-		ehci->periodic [i] = EHCI_LIST_END(ehci);
+
+	if (ehci->use_dummy_qh) {
+		struct ehci_qh_hw	*hw;
+		ehci->dummy = ehci_qh_alloc(ehci, flags);
+		if (!ehci->dummy)
+			goto fail;
+
+		hw = ehci->dummy->hw;
+		hw->hw_next = EHCI_LIST_END(ehci);
+		hw->hw_qtd_next = EHCI_LIST_END(ehci);
+		hw->hw_alt_next = EHCI_LIST_END(ehci);
+		hw->hw_token &= ~QTD_STS_ACTIVE;
+		ehci->dummy->hw = hw;
+
+		for (i = 0; i < ehci->periodic_size; i++)
+			ehci->periodic[i] = ehci->dummy->qh_dma;
+	} else {
+		for (i = 0; i < ehci->periodic_size; i++)
+			ehci->periodic[i] = EHCI_LIST_END(ehci);
+	}
 
 	/* software shadow of hardware table */
 	ehci->pshadow = kcalloc(ehci->periodic_size, sizeof(void *), flags);
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index a1e8d273103..655f3c9f88b 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -103,6 +103,19 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 	if (retval)
 		return retval;
 
+	if ((pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x7808) ||
+	    (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->device == 0x4396)) {
+		/* EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
+		 * read/write memory space which does not belong to it when
+		 * there is NULL pointer with T-bit set to 1 in the frame list
+		 * table. To avoid the issue, the frame list link pointer
+		 * should always contain a valid pointer to a inactive qh.
+		 */
+		ehci->use_dummy_qh = 1;
+		ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI "
+				"dummy qh workaround\n");
+	}
+
 	/* data structure init */
 	retval = ehci_init(hcd);
 	if (retval)
@@ -148,6 +161,18 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			if (pdev->revision < 0xa4)
 				ehci->no_selective_suspend = 1;
 			break;
+
+		/* MCP89 chips on the MacBookAir3,1 give EPROTO when
+		 * fetching device descriptors unless LPM is disabled.
+		 * There are also intermittent problems enumerating
+		 * devices with PPCD enabled.
+		 */
+		case 0x0d9d:
+			ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89");
+			ehci->has_lpm = 0;
+			ehci->has_ppcd = 0;
+			ehci->command &= ~CMD_PPCEE;
+			break;
 		}
 		break;
 	case PCI_VENDOR_ID_VIA:
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index a92526d6e5a..d9f78eb2657 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -98,7 +98,14 @@ static void periodic_unlink (struct ehci_hcd *ehci, unsigned frame, void *ptr)
 	 */
 	*prev_p = *periodic_next_shadow(ehci, &here,
 			Q_NEXT_TYPE(ehci, *hw_p));
-	*hw_p = *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p));
+
+	if (!ehci->use_dummy_qh ||
+	    *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p))
+			!= EHCI_LIST_END(ehci))
+		*hw_p = *shadow_next_periodic(ehci, &here,
+				Q_NEXT_TYPE(ehci, *hw_p));
+	else
+		*hw_p = ehci->dummy->qh_dma;
 }
 
 /* how many of the uframe's 125 usecs are allocated? */
@@ -2335,7 +2342,11 @@ restart:
 				 * pointer for much longer, if at all.
 				 */
 				*q_p = q.itd->itd_next;
-				*hw_p = q.itd->hw_next;
+				if (!ehci->use_dummy_qh ||
+				    q.itd->hw_next != EHCI_LIST_END(ehci))
+					*hw_p = q.itd->hw_next;
+				else
+					*hw_p = ehci->dummy->qh_dma;
 				type = Q_NEXT_TYPE(ehci, q.itd->hw_next);
 				wmb();
 				modified = itd_complete (ehci, q.itd);
@@ -2368,7 +2379,11 @@ restart:
 				 * URB completion.
 				 */
 				*q_p = q.sitd->sitd_next;
-				*hw_p = q.sitd->hw_next;
+				if (!ehci->use_dummy_qh ||
+				    q.sitd->hw_next != EHCI_LIST_END(ehci))
+					*hw_p = q.sitd->hw_next;
+				else
+					*hw_p = ehci->dummy->qh_dma;
 				type = Q_NEXT_TYPE(ehci, q.sitd->hw_next);
 				wmb();
 				modified = sitd_complete (ehci, q.sitd);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bde823f704e..ba8eab366b8 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -73,6 +73,7 @@ struct ehci_hcd {			/* one per controller */
 
 	/* async schedule support */
 	struct ehci_qh		*async;
+	struct ehci_qh		*dummy;		/* For AMD quirk use */
 	struct ehci_qh		*reclaim;
 	unsigned		scanning : 1;
 
@@ -131,6 +132,7 @@ struct ehci_hcd {			/* one per controller */
 	unsigned		need_io_watchdog:1;
 	unsigned		broken_periodic:1;
 	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
+	unsigned		use_dummy_qh:1;	/* AMD Frame List table quirk*/
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 8196fa11fec..43a39eb56cc 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -70,7 +70,6 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/list.h>
@@ -2684,7 +2683,7 @@ static int __devexit isp1362_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int __init isp1362_probe(struct platform_device *pdev)
+static int __devinit isp1362_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
 	struct isp1362_hcd *isp1362_hcd;
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index 6e7fb5f38db..ee60cd3ea64 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -12,7 +12,6 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/debugfs.h>
-#include <linux/smp_lock.h>
 #include <asm/io.h>
 
 #include "uhci-hcd.h"
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index fef5a1f9d48..5d963e35049 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -229,6 +229,13 @@ void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
 static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex,
 		u32 __iomem *addr, u32 port_status)
 {
+	/* Don't allow the USB core to disable SuperSpeed ports. */
+	if (xhci->port_array[wIndex] == 0x03) {
+		xhci_dbg(xhci, "Ignoring request to disable "
+				"SuperSpeed port.\n");
+		return;
+	}
+
 	/* Write 1 to disable the port */
 	xhci_writel(xhci, port_status | PORT_PE, addr);
 	port_status = xhci_readl(xhci, addr);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 202770676da..0fae58ef8af 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1045,7 +1045,7 @@ static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
 	if (udev->speed == USB_SPEED_SUPER)
 		return ep->ss_ep_comp.wBytesPerInterval;
 
-	max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+	max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
 	max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
 	/* A 0 in max burst means 1 transfer per ESIT */
 	return max_packet * (max_burst + 1);
@@ -1135,7 +1135,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 		/* Fall through */
 	case USB_SPEED_FULL:
 	case USB_SPEED_LOW:
-		max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+		max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
 		ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
 		break;
 	default:
@@ -1443,6 +1443,13 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->dcbaa = NULL;
 
 	scratchpad_free(xhci);
+
+	xhci->num_usb2_ports = 0;
+	xhci->num_usb3_ports = 0;
+	kfree(xhci->usb2_ports);
+	kfree(xhci->usb3_ports);
+	kfree(xhci->port_array);
+
 	xhci->page_size = 0;
 	xhci->page_shift = 0;
 	xhci->bus_suspended = 0;
@@ -1627,6 +1634,161 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
 			&xhci->ir_set->erst_dequeue);
 }
 
+static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
+		u32 __iomem *addr, u8 major_revision)
+{
+	u32 temp, port_offset, port_count;
+	int i;
+
+	if (major_revision > 0x03) {
+		xhci_warn(xhci, "Ignoring unknown port speed, "
+				"Ext Cap %p, revision = 0x%x\n",
+				addr, major_revision);
+		/* Ignoring port protocol we can't understand. FIXME */
+		return;
+	}
+
+	/* Port offset and count in the third dword, see section 7.2 */
+	temp = xhci_readl(xhci, addr + 2);
+	port_offset = XHCI_EXT_PORT_OFF(temp);
+	port_count = XHCI_EXT_PORT_COUNT(temp);
+	xhci_dbg(xhci, "Ext Cap %p, port offset = %u, "
+			"count = %u, revision = 0x%x\n",
+			addr, port_offset, port_count, major_revision);
+	/* Port count includes the current port offset */
+	if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
+		/* WTF? "Valid values are ‘1’ to MaxPorts" */
+		return;
+	port_offset--;
+	for (i = port_offset; i < (port_offset + port_count); i++) {
+		/* Duplicate entry.  Ignore the port if the revisions differ. */
+		if (xhci->port_array[i] != 0) {
+			xhci_warn(xhci, "Duplicate port entry, Ext Cap %p,"
+					" port %u\n", addr, i);
+			xhci_warn(xhci, "Port was marked as USB %u, "
+					"duplicated as USB %u\n",
+					xhci->port_array[i], major_revision);
+			/* Only adjust the roothub port counts if we haven't
+			 * found a similar duplicate.
+			 */
+			if (xhci->port_array[i] != major_revision &&
+				xhci->port_array[i] != (u8) -1) {
+				if (xhci->port_array[i] == 0x03)
+					xhci->num_usb3_ports--;
+				else
+					xhci->num_usb2_ports--;
+				xhci->port_array[i] = (u8) -1;
+			}
+			/* FIXME: Should we disable the port? */
+		}
+		xhci->port_array[i] = major_revision;
+		if (major_revision == 0x03)
+			xhci->num_usb3_ports++;
+		else
+			xhci->num_usb2_ports++;
+	}
+	/* FIXME: Should we disable ports not in the Extended Capabilities? */
+}
+
+/*
+ * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
+ * specify what speeds each port is supposed to be.  We can't count on the port
+ * speed bits in the PORTSC register being correct until a device is connected,
+ * but we need to set up the two fake roothubs with the correct number of USB
+ * 3.0 and USB 2.0 ports at host controller initialization time.
+ */
+static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
+{
+	u32 __iomem *addr;
+	u32 offset;
+	unsigned int num_ports;
+	int i, port_index;
+
+	addr = &xhci->cap_regs->hcc_params;
+	offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
+	if (offset == 0) {
+		xhci_err(xhci, "No Extended Capability registers, "
+				"unable to set up roothub.\n");
+		return -ENODEV;
+	}
+
+	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+	xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags);
+	if (!xhci->port_array)
+		return -ENOMEM;
+
+	/*
+	 * For whatever reason, the first capability offset is from the
+	 * capability register base, not from the HCCPARAMS register.
+	 * See section 5.3.6 for offset calculation.
+	 */
+	addr = &xhci->cap_regs->hc_capbase + offset;
+	while (1) {
+		u32 cap_id;
+
+		cap_id = xhci_readl(xhci, addr);
+		if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
+			xhci_add_in_port(xhci, num_ports, addr,
+					(u8) XHCI_EXT_PORT_MAJOR(cap_id));
+		offset = XHCI_EXT_CAPS_NEXT(cap_id);
+		if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports)
+				== num_ports)
+			break;
+		/*
+		 * Once you're into the Extended Capabilities, the offset is
+		 * always relative to the register holding the offset.
+		 */
+		addr += offset;
+	}
+
+	if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) {
+		xhci_warn(xhci, "No ports on the roothubs?\n");
+		return -ENODEV;
+	}
+	xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n",
+			xhci->num_usb2_ports, xhci->num_usb3_ports);
+	/*
+	 * Note we could have all USB 3.0 ports, or all USB 2.0 ports.
+	 * Not sure how the USB core will handle a hub with no ports...
+	 */
+	if (xhci->num_usb2_ports) {
+		xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)*
+				xhci->num_usb2_ports, flags);
+		if (!xhci->usb2_ports)
+			return -ENOMEM;
+
+		port_index = 0;
+		for (i = 0; i < num_ports; i++)
+			if (xhci->port_array[i] != 0x03) {
+				xhci->usb2_ports[port_index] =
+					&xhci->op_regs->port_status_base +
+					NUM_PORT_REGS*i;
+				xhci_dbg(xhci, "USB 2.0 port at index %u, "
+						"addr = %p\n", i,
+						xhci->usb2_ports[port_index]);
+				port_index++;
+			}
+	}
+	if (xhci->num_usb3_ports) {
+		xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
+				xhci->num_usb3_ports, flags);
+		if (!xhci->usb3_ports)
+			return -ENOMEM;
+
+		port_index = 0;
+		for (i = 0; i < num_ports; i++)
+			if (xhci->port_array[i] == 0x03) {
+				xhci->usb3_ports[port_index] =
+					&xhci->op_regs->port_status_base +
+					NUM_PORT_REGS*i;
+				xhci_dbg(xhci, "USB 3.0 port at index %u, "
+						"addr = %p\n", i,
+						xhci->usb3_ports[port_index]);
+				port_index++;
+			}
+	}
+	return 0;
+}
 
 int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 {
@@ -1809,6 +1971,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 	if (scratchpad_alloc(xhci, flags))
 		goto fail;
+	if (xhci_setup_port_arrays(xhci, flags))
+		goto fail;
 
 	return 0;
 
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 9f3115e729b..df558f6f84e 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2104,7 +2104,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
 
 	if (!(status & STS_EINT)) {
 		spin_unlock(&xhci->lock);
-		xhci_warn(xhci, "Spurious interrupt.\n");
 		return IRQ_NONE;
 	}
 	xhci_dbg(xhci, "op reg status = %08x\n", status);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 5d7d4e951ea..45e4a3108cc 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -577,6 +577,65 @@ static void xhci_restore_registers(struct xhci_hcd *xhci)
 	xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
 }
 
+static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
+{
+	u64	val_64;
+
+	/* step 2: initialize command ring buffer */
+	val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+	val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+		(xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+				      xhci->cmd_ring->dequeue) &
+		 (u64) ~CMD_RING_RSVD_BITS) |
+		xhci->cmd_ring->cycle_state;
+	xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n",
+			(long unsigned long) val_64);
+	xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+}
+
+/*
+ * The whole command ring must be cleared to zero when we suspend the host.
+ *
+ * The host doesn't save the command ring pointer in the suspend well, so we
+ * need to re-program it on resume.  Unfortunately, the pointer must be 64-byte
+ * aligned, because of the reserved bits in the command ring dequeue pointer
+ * register.  Therefore, we can't just set the dequeue pointer back in the
+ * middle of the ring (TRBs are 16-byte aligned).
+ */
+static void xhci_clear_command_ring(struct xhci_hcd *xhci)
+{
+	struct xhci_ring *ring;
+	struct xhci_segment *seg;
+
+	ring = xhci->cmd_ring;
+	seg = ring->deq_seg;
+	do {
+		memset(seg->trbs, 0, SEGMENT_SIZE);
+		seg = seg->next;
+	} while (seg != ring->deq_seg);
+
+	/* Reset the software enqueue and dequeue pointers */
+	ring->deq_seg = ring->first_seg;
+	ring->dequeue = ring->first_seg->trbs;
+	ring->enq_seg = ring->deq_seg;
+	ring->enqueue = ring->dequeue;
+
+	/*
+	 * Ring is now zeroed, so the HW should look for change of ownership
+	 * when the cycle bit is set to 1.
+	 */
+	ring->cycle_state = 1;
+
+	/*
+	 * Reset the hardware dequeue pointer.
+	 * Yes, this will need to be re-written after resume, but we're paranoid
+	 * and want to make sure the hardware doesn't access bogus memory
+	 * because, say, the BIOS or an SMI started the host without changing
+	 * the command ring pointers.
+	 */
+	xhci_set_cmd_ring_deq(xhci);
+}
+
 /*
  * Stop HC (not bus-specific)
  *
@@ -604,6 +663,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
 		spin_unlock_irq(&xhci->lock);
 		return -ETIMEDOUT;
 	}
+	xhci_clear_command_ring(xhci);
 
 	/* step 3: save registers */
 	xhci_save_registers(xhci);
@@ -635,7 +695,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	u32			command, temp = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
-	u64	val_64;
 	int	old_state, retval;
 
 	old_state = hcd->state;
@@ -648,15 +707,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		/* step 1: restore register */
 		xhci_restore_registers(xhci);
 		/* step 2: initialize command ring buffer */
-		val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
-		val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
-			 (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
-					       xhci->cmd_ring->dequeue) &
-			 (u64) ~CMD_RING_RSVD_BITS) |
-			 xhci->cmd_ring->cycle_state;
-		xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n",
-				(long unsigned long) val_64);
-		xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+		xhci_set_cmd_ring_deq(xhci);
 		/* step 3: restore state and start state*/
 		/* step 3: set CRS flag */
 		command = xhci_readl(xhci, &xhci->op_regs->command);
@@ -714,6 +765,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		return retval;
 	}
 
+	spin_unlock_irq(&xhci->lock);
 	/* Re-setup MSI-X */
 	if (hcd->irq)
 		free_irq(hcd->irq, hcd);
@@ -736,6 +788,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		hcd->irq = pdev->irq;
 	}
 
+	spin_lock_irq(&xhci->lock);
 	/* step 4: set Run/Stop bit */
 	command = xhci_readl(xhci, &xhci->op_regs->command);
 	command |= CMD_RUN;
@@ -1496,6 +1549,15 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 		cmd_completion = command->completion;
 		cmd_status = &command->status;
 		command->command_trb = xhci->cmd_ring->enqueue;
+
+		/* Enqueue pointer can be left pointing to the link TRB,
+		 * we must handle that
+		 */
+		if ((command->command_trb->link.control & TRB_TYPE_BITMASK)
+				== TRB_TYPE(TRB_LINK))
+			command->command_trb =
+				xhci->cmd_ring->enq_seg->next->trbs;
+
 		list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
 	} else {
 		in_ctx = virt_dev->in_ctx;
@@ -2219,6 +2281,15 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 	/* Attempt to submit the Reset Device command to the command ring */
 	spin_lock_irqsave(&xhci->lock, flags);
 	reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
+
+	/* Enqueue pointer can be left pointing to the link TRB,
+	 * we must handle that
+	 */
+	if ((reset_device_cmd->command_trb->link.control & TRB_TYPE_BITMASK)
+			== TRB_TYPE(TRB_LINK))
+		reset_device_cmd->command_trb =
+			xhci->cmd_ring->enq_seg->next->trbs;
+
 	list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
 	ret = xhci_queue_reset_device(xhci, slot_id);
 	if (ret) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 93d3bf4d213..170c367112d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -454,6 +454,24 @@ struct xhci_doorbell_array {
 
 
 /**
+ * struct xhci_protocol_caps
+ * @revision:		major revision, minor revision, capability ID,
+ *			and next capability pointer.
+ * @name_string:	Four ASCII characters to say which spec this xHC
+ *			follows, typically "USB ".
+ * @port_info:		Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+	u32	revision;
+	u32	name_string;
+	u32	port_info;
+};
+
+#define	XHCI_EXT_PORT_MAJOR(x)	(((x) >> 24) & 0xff)
+#define	XHCI_EXT_PORT_OFF(x)	((x) & 0xff)
+#define	XHCI_EXT_PORT_COUNT(x)	(((x) >> 8) & 0xff)
+
+/**
  * struct xhci_container_ctx
  * @type: Type of context.  Used to calculated offsets to contained contexts.
  * @size: Size of the context data
@@ -621,6 +639,11 @@ struct xhci_ep_ctx {
 #define MAX_PACKET_MASK		(0xffff << 16)
 #define MAX_PACKET_DECODED(p)	(((p) >> 16) & 0xffff)
 
+/* Get max packet size from ep desc. Bit 10..0 specify the max packet size.
+ * USB2.0 spec 9.6.6.
+ */
+#define GET_MAX_PACKET(p)	((p) & 0x7ff)
+
 /* tx_info bitmasks */
 #define AVG_TRB_LENGTH_FOR_EP(p)	((p) & 0xffff)
 #define MAX_ESIT_PAYLOAD_FOR_EP(p)	(((p) & 0xffff) << 16)
@@ -1235,6 +1258,14 @@ struct xhci_hcd {
 	u32			suspended_ports[8];	/* which ports are
 							   suspended */
 	unsigned long		resume_done[MAX_HC_PORTS];
+	/* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
+	u8			*port_array;
+	/* Array of pointers to USB 3.0 PORTSC registers */
+	u32 __iomem		**usb3_ports;
+	unsigned int		num_usb3_ports;
+	/* Array of pointers to USB 2.0 PORTSC registers */
+	u32 __iomem		**usb2_ports;
+	unsigned int		num_usb2_ports;
 };
 
 /* For testing purposes */
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index 5a47805d958..c90c89dc000 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -364,7 +364,7 @@ static int mts_scsi_host_reset(struct scsi_cmnd *srb)
 }
 
 static int
-mts_scsi_queuecommand(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback);
+mts_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *srb);
 
 static void mts_transfer_cleanup( struct urb *transfer );
 static void mts_do_sg(struct urb * transfer);
@@ -573,7 +573,7 @@ mts_build_transfer_context(struct scsi_cmnd *srb, struct mts_desc* desc)
 
 
 static int
-mts_scsi_queuecommand(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback)
+mts_scsi_queuecommand_lck(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback)
 {
 	struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
 	int err = 0;
@@ -626,6 +626,8 @@ out:
 	return err;
 }
 
+static DEF_SCSI_QCMD(mts_scsi_queuecommand)
+
 static struct scsi_host_template mts_scsi_host_template = {
 	.module			= THIS_MODULE,
 	.name			= "microtekX6",
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
index 2f43c57743c..9251773ecef 100644
--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -196,11 +196,9 @@ static ssize_t get_port1_handler(struct device *dev,
 	return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
 }
 
-static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO,
-		   get_port0_handler, set_port0_handler);
+static DEVICE_ATTR(port0, S_IRUGO | S_IWUSR, get_port0_handler, set_port0_handler);
 
-static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO,
-		   get_port1_handler, set_port1_handler);
+static DEVICE_ATTR(port1, S_IRUGO | S_IWUSR, get_port1_handler, set_port1_handler);
 
 
 static int cypress_probe(struct usb_interface *interface,
diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c
index d77aba46ae8..f63776a48e2 100644
--- a/drivers/usb/misc/trancevibrator.c
+++ b/drivers/usb/misc/trancevibrator.c
@@ -86,7 +86,7 @@ static ssize_t set_speed(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
-static DEVICE_ATTR(speed, S_IWUGO | S_IRUGO, show_speed, set_speed);
+static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR, show_speed, set_speed);
 
 static int tv_probe(struct usb_interface *interface,
 		    const struct usb_device_id *id)
diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
index 63da2c3c838..c96f51de169 100644
--- a/drivers/usb/misc/usbled.c
+++ b/drivers/usb/misc/usbled.c
@@ -94,7 +94,7 @@ static ssize_t set_##value(struct device *dev, struct device_attribute *attr, co
 	change_color(led);						\
 	return count;							\
 }									\
-static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value);
+static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, show_##value, set_##value);
 show_set(blue);
 show_set(red);
 show_set(green);
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index de8ef945b53..417b8f207e8 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -192,7 +192,7 @@ static ssize_t set_attr_##name(struct device *dev, 		\
 								\
 	return count;						\
 }								\
-static DEVICE_ATTR(name, S_IWUGO | S_IRUGO, show_attr_##name, set_attr_##name);
+static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_attr_##name, set_attr_##name);
 
 static ssize_t show_attr_text(struct device *dev,
 	struct device_attribute *attr, char *buf)
@@ -223,7 +223,7 @@ static ssize_t set_attr_text(struct device *dev,
 	return count;
 }
 
-static DEVICE_ATTR(text, S_IWUGO | S_IRUGO, show_attr_text, set_attr_text);
+static DEVICE_ATTR(text, S_IRUGO | S_IWUSR, show_attr_text, set_attr_text);
 
 static ssize_t show_attr_decimals(struct device *dev,
 	struct device_attribute *attr, char *buf)
@@ -272,8 +272,7 @@ static ssize_t set_attr_decimals(struct device *dev,
 	return count;
 }
 
-static DEVICE_ATTR(decimals, S_IWUGO | S_IRUGO,
-	show_attr_decimals, set_attr_decimals);
+static DEVICE_ATTR(decimals, S_IRUGO | S_IWUSR, show_attr_decimals, set_attr_decimals);
 
 static ssize_t show_attr_textmode(struct device *dev,
 	struct device_attribute *attr, char *buf)
@@ -319,8 +318,7 @@ static ssize_t set_attr_textmode(struct device *dev,
 	return -EINVAL;
 }
 
-static DEVICE_ATTR(textmode, S_IWUGO | S_IRUGO,
-	show_attr_textmode, set_attr_textmode);
+static DEVICE_ATTR(textmode, S_IRUGO | S_IWUSR, show_attr_textmode, set_attr_textmode);
 
 
 MYDEV_ATTR_SIMPLE_UNSIGNED(powered, update_display_powered);
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 719c6180b31..ac5bfd619e6 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -536,6 +536,7 @@ static const struct file_operations yurex_fops = {
 	.open =		yurex_open,
 	.release =	yurex_release,
 	.fasync	=	yurex_fasync,
+	.llseek =	default_llseek,
 };
 
 
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index 44cb37b5a4d..c436e1e2c3b 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -15,7 +15,6 @@
 #include <linux/poll.h>
 #include <linux/compat.h>
 #include <linux/mm.h>
-#include <linux/smp_lock.h>
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
 
diff --git a/drivers/usb/mon/mon_stat.c b/drivers/usb/mon/mon_stat.c
index 8ec94f15a73..e5ce42bd316 100644
--- a/drivers/usb/mon/mon_stat.c
+++ b/drivers/usb/mon/mon_stat.c
@@ -11,7 +11,6 @@
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/fs.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 
 #include "usb_mon.h"
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index e6669fc3b80..99beebce855 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2116,12 +2116,15 @@ bad_config:
 	 * Otherwise, wait till the gadget driver hooks up.
 	 */
 	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
+		struct usb_hcd	*hcd = musb_to_hcd(musb);
+
 		MUSB_HST_MODE(musb);
 		musb->xceiv->default_a = 1;
 		musb->xceiv->state = OTG_STATE_A_IDLE;
 
 		status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
 
+		hcd->self.uses_pio_for_control = 1;
 		DBG(1, "%s mode, status %d, devctl %02x %c\n",
 			"HOST", status,
 			musb_readb(musb->mregs, MUSB_DEVCTL),
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 36cfd060dbe..9d6ade82b9f 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -92,6 +92,59 @@
 
 /* ----------------------------------------------------------------------- */
 
+/* Maps the buffer to dma  */
+
+static inline void map_dma_buffer(struct musb_request *request,
+				struct musb *musb)
+{
+	if (request->request.dma == DMA_ADDR_INVALID) {
+		request->request.dma = dma_map_single(
+				musb->controller,
+				request->request.buf,
+				request->request.length,
+				request->tx
+					? DMA_TO_DEVICE
+					: DMA_FROM_DEVICE);
+		request->mapped = 1;
+	} else {
+		dma_sync_single_for_device(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+		request->mapped = 0;
+	}
+}
+
+/* Unmap the buffer from dma and maps it back to cpu */
+static inline void unmap_dma_buffer(struct musb_request *request,
+				struct musb *musb)
+{
+	if (request->request.dma == DMA_ADDR_INVALID) {
+		DBG(20, "not unmapping a never mapped buffer\n");
+		return;
+	}
+	if (request->mapped) {
+		dma_unmap_single(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+		request->request.dma = DMA_ADDR_INVALID;
+		request->mapped = 0;
+	} else {
+		dma_sync_single_for_cpu(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+
+	}
+}
+
 /*
  * Immediately complete a request.
  *
@@ -119,24 +172,8 @@ __acquires(ep->musb->lock)
 
 	ep->busy = 1;
 	spin_unlock(&musb->lock);
-	if (is_dma_capable()) {
-		if (req->mapped) {
-			dma_unmap_single(musb->controller,
-					req->request.dma,
-					req->request.length,
-					req->tx
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-			req->request.dma = DMA_ADDR_INVALID;
-			req->mapped = 0;
-		} else if (req->request.dma != DMA_ADDR_INVALID)
-			dma_sync_single_for_cpu(musb->controller,
-					req->request.dma,
-					req->request.length,
-					req->tx
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-	}
+	if (is_dma_capable() && ep->dma)
+		unmap_dma_buffer(req, musb);
 	if (request->status == 0)
 		DBG(5, "%s done request %p,  %d/%d\n",
 				ep->end_point.name, request,
@@ -395,6 +432,13 @@ static void txstate(struct musb *musb, struct musb_request *req)
 #endif
 
 	if (!use_dma) {
+		/*
+		 * Unmap the dma buffer back to cpu if dma channel
+		 * programming fails
+		 */
+		if (is_dma_capable() && musb_ep->dma)
+			unmap_dma_buffer(req, musb);
+
 		musb_write_fifo(musb_ep->hw_ep, fifo_count,
 				(u8 *) (request->buf + request->actual));
 		request->actual += fifo_count;
@@ -713,6 +757,21 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 					return;
 			}
 #endif
+			/*
+			 * Unmap the dma buffer back to cpu if dma channel
+			 * programming fails. This buffer is mapped if the
+			 * channel allocation is successful
+			 */
+			 if (is_dma_capable() && musb_ep->dma) {
+				unmap_dma_buffer(req, musb);
+
+				/*
+				 * Clear DMAENAB and AUTOCLEAR for the
+				 * PIO mode transfer
+				 */
+				csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR);
+				musb_writew(epio, MUSB_RXCSR, csr);
+			}
 
 			musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
 					(request->buf + request->actual));
@@ -837,7 +896,9 @@ void musb_g_rx(struct musb *musb, u8 epnum)
 		if (!request)
 			return;
 	}
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
 exit:
+#endif
 	/* Analyze request */
 	rxstate(musb, to_musb_request(request));
 }
@@ -1150,26 +1211,9 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 	request->epnum = musb_ep->current_epnum;
 	request->tx = musb_ep->is_in;
 
-	if (is_dma_capable() && musb_ep->dma) {
-		if (request->request.dma == DMA_ADDR_INVALID) {
-			request->request.dma = dma_map_single(
-					musb->controller,
-					request->request.buf,
-					request->request.length,
-					request->tx
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-			request->mapped = 1;
-		} else {
-			dma_sync_single_for_device(musb->controller,
-					request->request.dma,
-					request->request.length,
-					request->tx
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-			request->mapped = 0;
-		}
-	} else
+	if (is_dma_capable() && musb_ep->dma)
+		map_dma_buffer(request, musb);
+	else
 		request->mapped = 0;
 
 	spin_lock_irqsave(&musb->lock, lockflags);
@@ -1789,6 +1833,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 		spin_unlock_irqrestore(&musb->lock, flags);
 
 		if (is_otg_enabled(musb)) {
+			struct usb_hcd	*hcd = musb_to_hcd(musb);
+
 			DBG(3, "OTG startup...\n");
 
 			/* REVISIT:  funcall to other code, which also
@@ -1803,6 +1849,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 				musb->gadget_driver = NULL;
 				musb->g.dev.driver = NULL;
 				spin_unlock_irqrestore(&musb->lock, flags);
+			} else {
+				hcd->self.uses_pio_for_control = 1;
 			}
 		}
 	}
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
index bdc3ea66be6..9fea48264fa 100644
--- a/drivers/usb/otg/langwell_otg.c
+++ b/drivers/usb/otg/langwell_otg.c
@@ -1896,7 +1896,7 @@ set_a_bus_req(struct device *dev, struct device_attribute *attr,
 	}
 	return count;
 }
-static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req);
+static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, set_a_bus_req);
 
 static ssize_t
 get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1942,8 +1942,7 @@ set_a_bus_drop(struct device *dev, struct device_attribute *attr,
 	}
 	return count;
 }
-static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO,
-	get_a_bus_drop, set_a_bus_drop);
+static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, get_a_bus_drop, set_a_bus_drop);
 
 static ssize_t
 get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1988,7 +1987,7 @@ set_b_bus_req(struct device *dev, struct device_attribute *attr,
 	}
 	return count;
 }
-static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req);
+static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUSR, get_b_bus_req, set_b_bus_req);
 
 static ssize_t
 set_a_clr_err(struct device *dev, struct device_attribute *attr,
@@ -2012,7 +2011,7 @@ set_a_clr_err(struct device *dev, struct device_attribute *attr,
 	}
 	return count;
 }
-static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err);
+static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err);
 
 static struct attribute *inputs_attrs[] = {
 	&dev_attr_a_bus_req.attr,
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 76f8b355667..6a50965e23f 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -201,6 +201,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
+	{ USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
@@ -696,6 +697,7 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 263f6255119..1286f1e23d8 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -114,6 +114,9 @@
 /* Lenz LI-USB Computer Interface. */
 #define FTDI_LENZ_LIUSB_PID	0xD780
 
+/* Vardaan Enterprises Serial Interface VEUSB422R3 */
+#define FTDI_VARDAAN_PID	0xF070
+
 /*
  * Xsens Technologies BV products (http://www.xsens.com).
  */
@@ -721,6 +724,7 @@
  */
 #define RTSYSTEMS_VID			0x2100	/* Vendor ID */
 #define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
+#define RTSYSTEMS_CT29B_PID		0x9e54	/* CT29B Radio Cable */
 
 /*
  * Bayer Ascensia Contour blood glucose meter USB-converter cable.
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index e64da74bdcc..6954de50c0f 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -21,7 +21,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
@@ -52,6 +51,7 @@ static struct usb_driver usb_serial_driver = {
 	.suspend =	usb_serial_suspend,
 	.resume =	usb_serial_resume,
 	.no_dynamic_id = 	1,
+	.supports_autosuspend =	1,
 };
 
 /* There is no MODULE_DEVICE_TABLE for usbserial.c.  Instead
@@ -1344,6 +1344,8 @@ int usb_serial_register(struct usb_serial_driver *driver)
 		return -ENODEV;
 
 	fixup_generic(driver);
+	if (driver->usb_driver)
+		driver->usb_driver->supports_autosuspend = 1;
 
 	if (!driver->description)
 		driver->description = driver->driver.name;
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index a688b1e686e..689ee1fb702 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -285,7 +285,7 @@ static int slave_configure(struct scsi_device *sdev)
 
 /* queue a command */
 /* This is always called with scsi_lock(host) held */
-static int queuecommand(struct scsi_cmnd *srb,
+static int queuecommand_lck(struct scsi_cmnd *srb,
 			void (*done)(struct scsi_cmnd *))
 {
 	struct us_data *us = host_to_us(srb->device->host);
@@ -315,6 +315,8 @@ static int queuecommand(struct scsi_cmnd *srb,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(queuecommand)
+
 /***********************************************************************
  * Error handling functions
  ***********************************************************************/
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
index 57fc2f532ca..ceba512f84d 100644
--- a/drivers/usb/storage/sierra_ms.c
+++ b/drivers/usb/storage/sierra_ms.c
@@ -121,7 +121,7 @@ static ssize_t show_truinst(struct device *dev, struct device_attribute *attr,
 	}
 	return result;
 }
-static DEVICE_ATTR(truinst, S_IWUGO | S_IRUGO, show_truinst, NULL);
+static DEVICE_ATTR(truinst, S_IRUGO, show_truinst, NULL);
 
 int sierra_ms_init(struct us_data *us)
 {
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index d1268191acb..339fac3949d 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -430,7 +430,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 	return 0;
 }
 
-static int uas_queuecommand(struct scsi_cmnd *cmnd,
+static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 					void (*done)(struct scsi_cmnd *))
 {
 	struct scsi_device *sdev = cmnd->device;
@@ -488,6 +488,8 @@ static int uas_queuecommand(struct scsi_cmnd *cmnd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(uas_queuecommand)
+
 static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
 {
 	struct scsi_device *sdev = cmnd->device;