Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY changes from Greg Kroah-Hartman:
 "As we skipped the merge window for 3.6-rc1 for the tty tree,
  everything is now settled down and working properly, so we are ready
  for 3.7-rc1.  Here's the patchset, it's big, but the large changes are
  removing a firmware file and adding a staging tty driver (it depended
  on the tty core changes, so it's going through this tree instead of
  the staging tree.)

  All of these patches have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up more-or-less trivial conflicts in
 - drivers/char/pcmcia/synclink_cs.c:
    tty NULL dereference fix vs tty_port_cts_enabled() helper function
 - drivers/staging/{Kconfig,Makefile}:
    add-add conflict (dgrp driver added close to other staging drivers)
 - drivers/staging/ipack/devices/ipoctal.c:
    "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device"

* tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits)
  tty/serial: Add kgdb_nmi driver
  tty/serial/amba-pl011: Quiesce interrupts in poll_get_char
  tty/serial/amba-pl011: Implement poll_init callback
  tty/serial/core: Introduce poll_init callback
  kdb: Turn KGDB_KDB=n stubs into static inlines
  kdb: Implement disable_nmi command
  kernel/debug: Mask KGDB NMI upon entry
  serial: pl011: handle corruption at high clock speeds
  serial: sccnxp: Make 'default' choice in switch last
  serial: sccnxp: Remove mask termios caps for SW flow control
  serial: sccnxp: Report actual baudrate back to core
  serial: samsung: Add poll_get_char & poll_put_char
  Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate
  Powerpc 8xx CPM_UART maxidl should not depend on fifo size
  Powerpc 8xx CPM_UART too many interrupts
  Powerpc 8xx CPM_UART desynchronisation
  serial: set correct baud_base for EXSYS EX-41092 Dual 16950
  serial: omap: fix the reciever line error case
  8250: blacklist Winbond CIR port
  8250_pnp: do pnp probe before legacy probe
  ...

33 files changed, 137 insertions, 141 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index f763ed7ba91..ff7b5a8d501 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -826,7 +826,7 @@ static void acm_tty_set_termios(struct tty_struct *tty,
 						struct ktermios *termios_old)
 {
 	struct acm *acm = tty->driver_data;
-	struct ktermios *termios = tty->termios;
+	struct ktermios *termios = &tty->termios;
 	struct usb_cdc_line_coding newline;
 	int newctrl = acm->ctrlout;
 
@@ -1299,7 +1299,8 @@ skip_countries:
 	usb_set_intfdata(data_interface, acm);
 
 	usb_get_intf(control_interface);
-	tty_register_device(acm_tty_driver, minor, &control_interface->dev);
+	tty_port_register_device(&acm->port, acm_tty_driver, minor,
+			&control_interface->dev);
 
 	return 0;
 alloc_fail7:
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index da6d479ff9a..f1739526820 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -1133,7 +1133,8 @@ int gserial_setup(struct usb_gadget *g, unsigned count)
 	for (i = 0; i < count; i++) {
 		struct device	*tty_dev;
 
-		tty_dev = tty_register_device(gs_tty_driver, i, &g->dev);
+		tty_dev = tty_port_register_device(&ports[i].port->port,
+				gs_tty_driver, i, &g->dev);
 		if (IS_ERR(tty_dev))
 			pr_warning("%s: no classdev for port %d, err %ld\n",
 				__func__, i, PTR_ERR(tty_dev));
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index f8ce97d8b0a..3b98fb73336 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -215,7 +215,7 @@ static void ark3116_release(struct usb_serial *serial)
 
 static void ark3116_init_termios(struct tty_struct *tty)
 {
-	struct ktermios *termios = tty->termios;
+	struct ktermios *termios = &tty->termios;
 	*termios = tty_std_termios;
 	termios->c_cflag = B9600 | CS8
 				      | CREAD | HUPCL | CLOCAL;
@@ -229,7 +229,7 @@ static void ark3116_set_termios(struct tty_struct *tty,
 {
 	struct usb_serial *serial = port->serial;
 	struct ark3116_private *priv = usb_get_serial_port_data(port);
-	struct ktermios *termios = tty->termios;
+	struct ktermios *termios = &tty->termios;
 	unsigned int cflag = termios->c_cflag;
 	int bps = tty_get_baud_rate(tty);
 	int quot;
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 6b736563295..a46df73ee96 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -307,7 +307,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 	unsigned long control_state;
 	int bad_flow_control;
 	speed_t baud;
-	struct ktermios *termios = tty->termios;
+	struct ktermios *termios = &tty->termios;
 
 	iflag = termios->c_iflag;
 	cflag = termios->c_cflag;
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index b9cca6dcde0..9a564286bfd 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -165,8 +165,8 @@ static int usb_console_setup(struct console *co, char *options)
 		}
 
 		if (serial->type->set_termios) {
-			tty->termios->c_cflag = cflag;
-			tty_termios_encode_baud_rate(tty->termios, baud, baud);
+			tty->termios.c_cflag = cflag;
+			tty_termios_encode_baud_rate(&tty->termios, baud, baud);
 			memset(&dummy, 0, sizeof(struct ktermios));
 			serial->type->set_termios(tty, port, &dummy);
 
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 1e71079ce33..ba5e07e188a 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -469,7 +469,7 @@ static void cp210x_get_termios(struct tty_struct *tty,
 
 	if (tty) {
 		cp210x_get_termios_port(tty->driver_data,
-			&tty->termios->c_cflag, &baud);
+			&tty->termios.c_cflag, &baud);
 		tty_encode_baud_rate(tty, baud, baud);
 	}
 
@@ -631,7 +631,7 @@ static void cp210x_change_speed(struct tty_struct *tty,
 {
 	u32 baud;
 
-	baud = tty->termios->c_ospeed;
+	baud = tty->termios.c_ospeed;
 
 	/* This maps the requested rate to a rate valid on cp2102 or cp2103,
 	 * or to an arbitrary rate in [1M,2M].
@@ -665,10 +665,10 @@ static void cp210x_set_termios(struct tty_struct *tty,
 	if (!tty)
 		return;
 
-	cflag = tty->termios->c_cflag;
+	cflag = tty->termios.c_cflag;
 	old_cflag = old_termios->c_cflag;
 
-	if (tty->termios->c_ospeed != old_termios->c_ospeed)
+	if (tty->termios.c_ospeed != old_termios->c_ospeed)
 		cp210x_change_speed(tty, port, old_termios);
 
 	/* If the number of data bits is to be updated */
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index b78c34eb5d3..be34f153e56 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -922,38 +922,38 @@ static void cypress_set_termios(struct tty_struct *tty,
 	   early enough */
 	if (!priv->termios_initialized) {
 		if (priv->chiptype == CT_EARTHMATE) {
-			*(tty->termios) = tty_std_termios;
-			tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
+			tty->termios = tty_std_termios;
+			tty->termios.c_cflag = B4800 | CS8 | CREAD | HUPCL |
 				CLOCAL;
-			tty->termios->c_ispeed = 4800;
-			tty->termios->c_ospeed = 4800;
+			tty->termios.c_ispeed = 4800;
+			tty->termios.c_ospeed = 4800;
 		} else if (priv->chiptype == CT_CYPHIDCOM) {
-			*(tty->termios) = tty_std_termios;
-			tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
+			tty->termios = tty_std_termios;
+			tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
 				CLOCAL;
-			tty->termios->c_ispeed = 9600;
-			tty->termios->c_ospeed = 9600;
+			tty->termios.c_ispeed = 9600;
+			tty->termios.c_ospeed = 9600;
 		} else if (priv->chiptype == CT_CA42V2) {
-			*(tty->termios) = tty_std_termios;
-			tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
+			tty->termios = tty_std_termios;
+			tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
 				CLOCAL;
-			tty->termios->c_ispeed = 9600;
-			tty->termios->c_ospeed = 9600;
+			tty->termios.c_ispeed = 9600;
+			tty->termios.c_ospeed = 9600;
 		}
 		priv->termios_initialized = 1;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* Unsupported features need clearing */
-	tty->termios->c_cflag &= ~(CMSPAR|CRTSCTS);
+	tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS);
 
-	cflag = tty->termios->c_cflag;
-	iflag = tty->termios->c_iflag;
+	cflag = tty->termios.c_cflag;
+	iflag = tty->termios.c_iflag;
 
 	/* check if there are new settings */
 	if (old_termios) {
 		spin_lock_irqsave(&priv->lock, flags);
-		priv->tmp_termios = *(tty->termios);
+		priv->tmp_termios = tty->termios;
 		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 
@@ -1021,7 +1021,7 @@ static void cypress_set_termios(struct tty_struct *tty,
 				"4800bps.");
 		/* define custom termios settings for NMEA protocol */
 
-		tty->termios->c_iflag /* input modes - */
+		tty->termios.c_iflag /* input modes - */
 			&= ~(IGNBRK  /* disable ignore break */
 			| BRKINT     /* disable break causes interrupt */
 			| PARMRK     /* disable mark parity errors */
@@ -1031,10 +1031,10 @@ static void cypress_set_termios(struct tty_struct *tty,
 			| ICRNL      /* disable translate CR to NL */
 			| IXON);     /* disable enable XON/XOFF flow control */
 
-		tty->termios->c_oflag /* output modes */
+		tty->termios.c_oflag /* output modes */
 			&= ~OPOST;    /* disable postprocess output char */
 
-		tty->termios->c_lflag /* line discipline modes */
+		tty->termios.c_lflag /* line discipline modes */
 			&= ~(ECHO     /* disable echo input characters */
 			| ECHONL      /* disable echo new line */
 			| ICANON      /* disable erase, kill, werase, and rprnt
@@ -1200,7 +1200,7 @@ static void cypress_read_int_callback(struct urb *urb)
 
 	/* hangup, as defined in acm.c... this might be a bad place for it
 	 * though */
-	if (tty && !(tty->termios->c_cflag & CLOCAL) &&
+	if (tty && !(tty->termios.c_cflag & CLOCAL) &&
 			!(priv->current_status & UART_CD)) {
 		dbg("%s - calling hangup", __func__);
 		tty_hangup(tty);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index b5cd838093e..afd9d2ec577 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -687,8 +687,8 @@ static void digi_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct digi_port *priv = usb_get_serial_port_data(port);
-	unsigned int iflag = tty->termios->c_iflag;
-	unsigned int cflag = tty->termios->c_cflag;
+	unsigned int iflag = tty->termios.c_iflag;
+	unsigned int cflag = tty->termios.c_cflag;
 	unsigned int old_iflag = old_termios->c_iflag;
 	unsigned int old_cflag = old_termios->c_cflag;
 	unsigned char buf[32];
@@ -709,7 +709,7 @@ static void digi_set_termios(struct tty_struct *tty,
 			/* don't set RTS if using hardware flow control */
 			/* and throttling input */
 			modem_signals = TIOCM_DTR;
-			if (!(tty->termios->c_cflag & CRTSCTS) ||
+			if (!(tty->termios.c_cflag & CRTSCTS) ||
 			    !test_bit(TTY_THROTTLED, &tty->flags))
 				modem_signals |= TIOCM_RTS;
 			digi_set_modem_signals(port, modem_signals, 1);
@@ -748,7 +748,7 @@ static void digi_set_termios(struct tty_struct *tty,
 		}
 	}
 	/* set parity */
-	tty->termios->c_cflag &= ~CMSPAR;
+	tty->termios.c_cflag &= ~CMSPAR;
 
 	if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) {
 		if (cflag&PARENB) {
@@ -1124,8 +1124,8 @@ static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	/* set termios settings */
 	if (tty) {
-		not_termios.c_cflag = ~tty->termios->c_cflag;
-		not_termios.c_iflag = ~tty->termios->c_iflag;
+		not_termios.c_cflag = ~tty->termios.c_cflag;
+		not_termios.c_iflag = ~tty->termios.c_iflag;
 		digi_set_termios(tty, port, &not_termios);
 	}
 	return 0;
@@ -1500,7 +1500,7 @@ static int digi_read_oob_callback(struct urb *urb)
 
 		rts = 0;
 		if (tty)
-			rts = tty->termios->c_cflag & CRTSCTS;
+			rts = tty->termios.c_cflag & CRTSCTS;
 		
 		if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
 			spin_lock(&priv->dp_port_lock);
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index cdf61dd0731..34e86383090 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -87,7 +87,7 @@ static int empeg_startup(struct usb_serial *serial)
 
 static void empeg_init_termios(struct tty_struct *tty)
 {
-	struct ktermios *termios = tty->termios;
+	struct ktermios *termios = &tty->termios;
 
 	/*
 	 * The empeg-car player wants these particular tty settings.
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 499b15fd82f..79451ee12ca 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -173,10 +173,11 @@ static void f81232_set_termios(struct tty_struct *tty,
 	/* FIXME - Stubbed out for now */
 
 	/* Don't change anything if nothing has changed */
-	if (!tty_termios_hw_change(tty->termios, old_termios))
+	if (!tty_termios_hw_change(&tty->termios, old_termios))
 		return;
 
 	/* Do the real work here... */
+	tty_termios_copy_hw(&tty->termios, old_termios);
 }
 
 static int f81232_tiocmget(struct tty_struct *tty)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f906b3aec21..0c8d1c22627 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2102,7 +2102,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 {
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	struct ktermios *termios = tty->termios;
+	struct ktermios *termios = &tty->termios;
 	unsigned int cflag = termios->c_cflag;
 	__u16 urb_value; /* will hold the new flags */
 
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index e1f5ccd1e8f..f435575c4e6 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1458,7 +1458,7 @@ static void edge_throttle(struct tty_struct *tty)
 	}
 
 	/* if we are implementing RTS/CTS, toggle that line */
-	if (tty->termios->c_cflag & CRTSCTS) {
+	if (tty->termios.c_cflag & CRTSCTS) {
 		edge_port->shadowMCR &= ~MCR_RTS;
 		status = send_cmd_write_uart_register(edge_port, MCR,
 							edge_port->shadowMCR);
@@ -1497,7 +1497,7 @@ static void edge_unthrottle(struct tty_struct *tty)
 			return;
 	}
 	/* if we are implementing RTS/CTS, toggle that line */
-	if (tty->termios->c_cflag & CRTSCTS) {
+	if (tty->termios.c_cflag & CRTSCTS) {
 		edge_port->shadowMCR |= MCR_RTS;
 		send_cmd_write_uart_register(edge_port, MCR,
 						edge_port->shadowMCR);
@@ -1516,9 +1516,9 @@ static void edge_set_termios(struct tty_struct *tty,
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	unsigned int cflag;
 
-	cflag = tty->termios->c_cflag;
+	cflag = tty->termios.c_cflag;
 	dbg("%s - clfag %08x iflag %08x", __func__,
-	    tty->termios->c_cflag, tty->termios->c_iflag);
+	    tty->termios.c_cflag, tty->termios.c_iflag);
 	dbg("%s - old clfag %08x old iflag %08x", __func__,
 	    old_termios->c_cflag, old_termios->c_iflag);
 
@@ -1987,7 +1987,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 		tty = tty_port_tty_get(&edge_port->port->port);
 		if (tty) {
 			change_port_settings(tty,
-				edge_port, tty->termios);
+				edge_port, &tty->termios);
 			tty_kref_put(tty);
 		}
 
@@ -2570,7 +2570,7 @@ static void change_port_settings(struct tty_struct *tty,
 		return;
 	}
 
-	cflag = tty->termios->c_cflag;
+	cflag = tty->termios.c_cflag;
 
 	switch (cflag & CSIZE) {
 	case CS5:
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 3936904c641..765978ae752 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1870,7 +1870,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	/* set up the port settings */
 	if (tty)
-		edge_set_termios(tty, port, tty->termios);
+		edge_set_termios(tty, port, &tty->termios);
 
 	/* open up the port */
 
@@ -2272,13 +2272,13 @@ static void change_port_settings(struct tty_struct *tty,
 
 	config = kmalloc (sizeof (*config), GFP_KERNEL);
 	if (!config) {
-		*tty->termios = *old_termios;
+		tty->termios = *old_termios;
 		dev_err(&edge_port->port->dev, "%s - out of memory\n",
 								__func__);
 		return;
 	}
 
-	cflag = tty->termios->c_cflag;
+	cflag = tty->termios.c_cflag;
 
 	config->wFlags = 0;
 
@@ -2362,7 +2362,7 @@ static void change_port_settings(struct tty_struct *tty,
 	} else
 		dbg("%s - OUTBOUND XON/XOFF is disabled", __func__);
 
-	tty->termios->c_cflag &= ~CMSPAR;
+	tty->termios.c_cflag &= ~CMSPAR;
 
 	/* Round the baud rate */
 	baud = tty_get_baud_rate(tty);
@@ -2408,10 +2408,10 @@ static void edge_set_termios(struct tty_struct *tty,
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	unsigned int cflag;
 
-	cflag = tty->termios->c_cflag;
+	cflag = tty->termios.c_cflag;
 
 	dbg("%s - clfag %08x iflag %08x", __func__,
-	    tty->termios->c_cflag, tty->termios->c_iflag);
+	    tty->termios.c_cflag, tty->termios.c_iflag);
 	dbg("%s - old clfag %08x old iflag %08x", __func__,
 	    old_termios->c_cflag, old_termios->c_iflag);
 	dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index fc09414c960..5a96692b12a 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -381,7 +381,7 @@ static void ir_set_termios(struct tty_struct *tty,
 		ir_xbof = ir_xbof_change(xbof) ;
 
 	/* Only speed changes are supported */
-	tty_termios_copy_hw(tty->termios, old_termios);
+	tty_termios_copy_hw(&tty->termios, old_termios);
 	tty_encode_baud_rate(tty, baud, baud);
 
 	/*
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 22b1eb5040b..bf3864045c1 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -921,7 +921,7 @@ static void iuu_set_termios(struct tty_struct *tty,
 {
 	const u32 supported_mask = CMSPAR|PARENB|PARODD;
 	struct iuu_private *priv = usb_get_serial_port_data(port);
-	unsigned int cflag = tty->termios->c_cflag;
+	unsigned int cflag = tty->termios.c_cflag;
 	int status;
 	u32 actual;
 	u32 parity;
@@ -930,7 +930,7 @@ static void iuu_set_termios(struct tty_struct *tty,
 	u32 newval = cflag & supported_mask;
 
 	/* Just use the ospeed. ispeed should be the same. */
-	baud = tty->termios->c_ospeed;
+	baud = tty->termios.c_ospeed;
 
 	dbg("%s - enter c_ospeed or baud=%d", __func__, baud);
 
@@ -961,13 +961,13 @@ static void iuu_set_termios(struct tty_struct *tty,
 	 * settings back over and then adjust them
 	 */
 	if (old_termios)
-		tty_termios_copy_hw(tty->termios, old_termios);
+		tty_termios_copy_hw(&tty->termios, old_termios);
 	if (status != 0)	/* Set failed - return old bits */
 		return;
 	/* Re-encode speed, parity and csize */
 	tty_encode_baud_rate(tty, baud, baud);
-	tty->termios->c_cflag &= ~(supported_mask|CSIZE);
-	tty->termios->c_cflag |= newval | csize;
+	tty->termios.c_cflag &= ~(supported_mask|CSIZE);
+	tty->termios.c_cflag |= newval | csize;
 }
 
 static void iuu_close(struct usb_serial_port *port)
@@ -993,14 +993,14 @@ static void iuu_close(struct usb_serial_port *port)
 
 static void iuu_init_termios(struct tty_struct *tty)
 {
-	*(tty->termios) = tty_std_termios;
-	tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
+	tty->termios = tty_std_termios;
+	tty->termios.c_cflag = CLOCAL | CREAD | CS8 | B9600
 				| TIOCM_CTS | CSTOPB | PARENB;
-	tty->termios->c_ispeed = 9600;
-	tty->termios->c_ospeed = 9600;
-	tty->termios->c_lflag = 0;
-	tty->termios->c_oflag = 0;
-	tty->termios->c_iflag = 0;
+	tty->termios.c_ispeed = 9600;
+	tty->termios.c_ospeed = 9600;
+	tty->termios.c_lflag = 0;
+	tty->termios.c_oflag = 0;
+	tty->termios.c_iflag = 0;
 }
 
 static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -1012,8 +1012,8 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
 	u32 actual;
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 
-	baud = tty->termios->c_ospeed;
-	tty->termios->c_ispeed = baud;
+	baud = tty->termios.c_ospeed;
+	tty->termios.c_ispeed = baud;
 	/* Re-encode speed */
 	tty_encode_baud_rate(tty, baud, baud);
 
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index af0b70eaf03..7bcbb47e144 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -158,7 +158,7 @@ static void keyspan_set_termios(struct tty_struct *tty,
 
 	p_priv = usb_get_serial_port_data(port);
 	d_details = p_priv->device_details;
-	cflag = tty->termios->c_cflag;
+	cflag = tty->termios.c_cflag;
 	device_port = port->number - port->serial->minor;
 
 	/* Baud rate calculation takes baud rate as an integer
@@ -179,7 +179,7 @@ static void keyspan_set_termios(struct tty_struct *tty,
 	p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none;
 
 	/* Mark/Space not supported */
-	tty->termios->c_cflag &= ~CMSPAR;
+	tty->termios.c_cflag &= ~CMSPAR;
 
 	keyspan_send_setup(port, 0);
 }
@@ -1086,7 +1086,7 @@ static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	device_port = port->number - port->serial->minor;
 	if (tty) {
-		cflag = tty->termios->c_cflag;
+		cflag = tty->termios.c_cflag;
 		/* Baud rate calculation takes baud rate as an integer
 		   so other rates can be generated if desired. */
 		baud_rate = tty_get_baud_rate(tty);
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index a4ac3cfeffc..dcada8615fc 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -338,7 +338,7 @@ static void keyspan_pda_set_termios(struct tty_struct *tty,
 	   7[EOMS]1: 10 bit, b0/b7 is parity
 	   7[EOMS]2: 11 bit, b0/b7 is parity, extra bit always (mark?)
 
-	   HW flow control is dictated by the tty->termios->c_cflags & CRTSCTS
+	   HW flow control is dictated by the tty->termios.c_cflags & CRTSCTS
 	   bit.
 
 	   For now, just do baud. */
@@ -353,7 +353,7 @@ static void keyspan_pda_set_termios(struct tty_struct *tty,
 	}
 	/* Only speed can change so copy the old h/w parameters
 	   then encode the new speed */
-	tty_termios_copy_hw(tty->termios, old_termios);
+	tty_termios_copy_hw(&tty->termios, old_termios);
 	tty_encode_baud_rate(tty, speed, speed);
 }
 
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 5bed59cd577..def9ad25871 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -311,12 +311,12 @@ static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	/* set up termios structure */
 	spin_lock_irqsave(&priv->lock, flags);
-	priv->termios.c_iflag = tty->termios->c_iflag;
-	priv->termios.c_oflag = tty->termios->c_oflag;
-	priv->termios.c_cflag = tty->termios->c_cflag;
-	priv->termios.c_lflag = tty->termios->c_lflag;
+	priv->termios.c_iflag = tty->termios.c_iflag;
+	priv->termios.c_oflag = tty->termios.c_oflag;
+	priv->termios.c_cflag = tty->termios.c_cflag;
+	priv->termios.c_lflag = tty->termios.c_lflag;
 	for (i = 0; i < NCCS; i++)
-		priv->termios.c_cc[i] = tty->termios->c_cc[i];
+		priv->termios.c_cc[i] = tty->termios.c_cc[i];
 	priv->cfg.pktlen   = cfg->pktlen;
 	priv->cfg.baudrate = cfg->baudrate;
 	priv->cfg.databits = cfg->databits;
@@ -445,9 +445,9 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 				 struct ktermios *old_termios)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
-	unsigned int iflag = tty->termios->c_iflag;
+	unsigned int iflag = tty->termios.c_iflag;
 	unsigned int old_iflag = old_termios->c_iflag;
-	unsigned int cflag = tty->termios->c_cflag;
+	unsigned int cflag = tty->termios.c_cflag;
 	unsigned int old_cflag = old_termios->c_cflag;
 	struct klsi_105_port_settings *cfg;
 	unsigned long flags;
@@ -560,7 +560,7 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 	if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))
 	    || (cflag & CSTOPB) != (old_cflag & CSTOPB)) {
 		/* Not currently supported */
-		tty->termios->c_cflag &= ~(PARENB|PARODD|CSTOPB);
+		tty->termios.c_cflag &= ~(PARENB|PARODD|CSTOPB);
 #if 0
 		priv->last_lcr = 0;
 
@@ -587,7 +587,7 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 	    || (iflag & IXON) != (old_iflag & IXON)
 	    ||  (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
 		/* Not currently supported */
-		tty->termios->c_cflag &= ~CRTSCTS;
+		tty->termios.c_cflag &= ~CRTSCTS;
 		/* Drop DTR/RTS if no flow control otherwise assert */
 #if 0
 		if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS))
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index fafeabb64c5..bf5c74965d3 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -191,11 +191,11 @@ static void kobil_release(struct usb_serial *serial)
 static void kobil_init_termios(struct tty_struct *tty)
 {
 	/* Default to echo off and other sane device settings */
-	tty->termios->c_lflag = 0;
-	tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
-	tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
+	tty->termios.c_lflag = 0;
+	tty->termios.c_iflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
+	tty->termios.c_iflag |= IGNBRK | IGNPAR | IXOFF;
 	/* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
-	tty->termios->c_oflag &= ~ONLCR;
+	tty->termios.c_oflag &= ~ONLCR;
 }
 
 static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -581,14 +581,14 @@ static void kobil_set_termios(struct tty_struct *tty,
 	struct kobil_private *priv;
 	int result;
 	unsigned short urb_val = 0;
-	int c_cflag = tty->termios->c_cflag;
+	int c_cflag = tty->termios.c_cflag;
 	speed_t speed;
 
 	priv = usb_get_serial_port_data(port);
 	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
 			priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) {
 		/* This device doesn't support ioctl calls */
-		*tty->termios = *old;
+		tty_termios_copy_hw(&tty->termios, old);
 		return;
 	}
 
@@ -612,7 +612,7 @@ static void kobil_set_termios(struct tty_struct *tty,
 			urb_val |= SUSBCR_SPASB_EvenParity;
 	} else
 		urb_val |= SUSBCR_SPASB_NoParity;
-	tty->termios->c_cflag &= ~CMSPAR;
+	tty->termios.c_cflag &= ~CMSPAR;
 	tty_encode_baud_rate(tty, speed, speed);
 
 	result = usb_control_msg(port->serial->dev,
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index a71fa0aa040..df98cffdba6 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -454,7 +454,7 @@ static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
 	 * either.
 	 */
 	spin_lock_irqsave(&priv->lock, flags);
-	if (tty && (tty->termios->c_cflag & CBAUD))
+	if (tty && (tty->termios.c_cflag & CBAUD))
 		priv->control_state = TIOCM_DTR | TIOCM_RTS;
 	else
 		priv->control_state = 0;
@@ -634,7 +634,7 @@ static void mct_u232_set_termios(struct tty_struct *tty,
 {
 	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
-	struct ktermios *termios = tty->termios;
+	struct ktermios *termios = &tty->termios;
 	unsigned int cflag = termios->c_cflag;
 	unsigned int old_cflag = old_termios->c_cflag;
 	unsigned long flags;
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index d47eb06fe46..2b0627b5fe2 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -130,12 +130,6 @@ static void metrousb_read_int_callback(struct urb *urb)
 
 	/* Set the data read from the usb port into the serial port buffer. */
 	tty = tty_port_tty_get(&port->port);
-	if (!tty) {
-		dev_err(&port->dev, "%s - bad tty pointer - exiting\n",
-			__func__);
-		return;
-	}
-
 	if (tty && urb->actual_length) {
 		/* Loop through the data copying each byte to the tty layer. */
 		tty_insert_flip_string(tty, data, urb->actual_length);
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index a07dd3c8cfe..012f67b2e4c 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1349,7 +1349,7 @@ static void mos7720_throttle(struct tty_struct *tty)
 	}
 
 	/* if we are implementing RTS/CTS, toggle that line */
-	if (tty->termios->c_cflag & CRTSCTS) {
+	if (tty->termios.c_cflag & CRTSCTS) {
 		mos7720_port->shadowMCR &= ~UART_MCR_RTS;
 		write_mos_reg(port->serial, port->number - port->serial->minor,
 			      MCR, mos7720_port->shadowMCR);
@@ -1383,7 +1383,7 @@ static void mos7720_unthrottle(struct tty_struct *tty)
 	}
 
 	/* if we are implementing RTS/CTS, toggle that line */
-	if (tty->termios->c_cflag & CRTSCTS) {
+	if (tty->termios.c_cflag & CRTSCTS) {
 		mos7720_port->shadowMCR |= UART_MCR_RTS;
 		write_mos_reg(port->serial, port->number - port->serial->minor,
 			      MCR, mos7720_port->shadowMCR);
@@ -1604,8 +1604,8 @@ static void change_port_settings(struct tty_struct *tty,
 	lStop = 0x00;	/* 1 stop bit */
 	lParity = 0x00;	/* No parity */
 
-	cflag = tty->termios->c_cflag;
-	iflag = tty->termios->c_iflag;
+	cflag = tty->termios.c_cflag;
+	iflag = tty->termios.c_iflag;
 
 	/* Change the number of bits */
 	switch (cflag & CSIZE) {
@@ -1753,11 +1753,11 @@ static void mos7720_set_termios(struct tty_struct *tty,
 
 	dbg("%s\n", "setting termios - ASPIRE");
 
-	cflag = tty->termios->c_cflag;
+	cflag = tty->termios.c_cflag;
 
 	dbg("%s - cflag %08x iflag %08x", __func__,
-	    tty->termios->c_cflag,
-	    RELEVANT_IFLAG(tty->termios->c_iflag));
+	    tty->termios.c_cflag,
+	    RELEVANT_IFLAG(tty->termios.c_iflag));
 
 	dbg("%s - old cflag %08x old iflag %08x", __func__,
 	    old_termios->c_cflag,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 2f6da1e89bf..402c32d7acc 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1651,7 +1651,7 @@ static void mos7840_throttle(struct tty_struct *tty)
 			return;
 	}
 	/* if we are implementing RTS/CTS, toggle that line */
-	if (tty->termios->c_cflag & CRTSCTS) {
+	if (tty->termios.c_cflag & CRTSCTS) {
 		mos7840_port->shadowMCR &= ~MCR_RTS;
 		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
 					 mos7840_port->shadowMCR);
@@ -1694,7 +1694,7 @@ static void mos7840_unthrottle(struct tty_struct *tty)
 	}
 
 	/* if we are implementing RTS/CTS, toggle that line */
-	if (tty->termios->c_cflag & CRTSCTS) {
+	if (tty->termios.c_cflag & CRTSCTS) {
 		mos7840_port->shadowMCR |= MCR_RTS;
 		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
 					 mos7840_port->shadowMCR);
@@ -2000,8 +2000,8 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 	lStop = LCR_STOP_1;
 	lParity = LCR_PAR_NONE;
 
-	cflag = tty->termios->c_cflag;
-	iflag = tty->termios->c_iflag;
+	cflag = tty->termios.c_cflag;
+	iflag = tty->termios.c_iflag;
 
 	/* Change the number of bits */
 	if (cflag & CSIZE) {
@@ -2161,10 +2161,10 @@ static void mos7840_set_termios(struct tty_struct *tty,
 
 	dbg("%s", "setting termios - ");
 
-	cflag = tty->termios->c_cflag;
+	cflag = tty->termios.c_cflag;
 
 	dbg("%s - clfag %08x iflag %08x", __func__,
-	    tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
+	    tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag));
 	dbg("%s - old clfag %08x old iflag %08x", __func__,
 	    old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
 	dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 5976b65ab6e..9f555560bfb 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -404,10 +404,10 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty)
 
 static void oti6858_init_termios(struct tty_struct *tty)
 {
-	*(tty->termios) = tty_std_termios;
-	tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
-	tty->termios->c_ispeed = 38400;
-	tty->termios->c_ospeed = 38400;
+	tty->termios = tty_std_termios;
+	tty->termios.c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
+	tty->termios.c_ispeed = 38400;
+	tty->termios.c_ospeed = 38400;
 }
 
 static void oti6858_set_termios(struct tty_struct *tty,
@@ -425,7 +425,7 @@ static void oti6858_set_termios(struct tty_struct *tty,
 		return;
 	}
 
-	cflag = tty->termios->c_cflag;
+	cflag = tty->termios.c_cflag;
 
 	spin_lock_irqsave(&priv->lock, flags);
 	divisor = priv->pending_setup.divisor;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 13b8dd6481f..2b9108a8ea6 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -260,16 +260,16 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	   serial settings even to the same values as before. Thus
 	   we actually need to filter in this specific case */
 
-	if (!tty_termios_hw_change(tty->termios, old_termios))
+	if (!tty_termios_hw_change(&tty->termios, old_termios))
 		return;
 
-	cflag = tty->termios->c_cflag;
+	cflag = tty->termios.c_cflag;
 
 	buf = kzalloc(7, GFP_KERNEL);
 	if (!buf) {
 		dev_err(&port->dev, "%s - out of memory.\n", __func__);
 		/* Report back no change occurred */
-		*tty->termios = *old_termios;
+		tty->termios = *old_termios;
 		return;
 	}
 
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 151670b6b72..7df9cdb053e 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -275,7 +275,7 @@ static void qt2_set_termios(struct tty_struct *tty,
 {
 	struct usb_device *dev = port->serial->dev;
 	struct qt2_port_private *port_priv;
-	struct ktermios *termios = tty->termios;
+	struct ktermios *termios = &tty->termios;
 	u16 baud;
 	unsigned int cflag = termios->c_cflag;
 	u16 new_lcr = 0;
@@ -406,7 +406,7 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
 	port_priv->device_port = (u8) device_port;
 
 	if (tty)
-		qt2_set_termios(tty, port, tty->termios);
+		qt2_set_termios(tty, port, &tty->termios);
 
 	return 0;
 
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 0274710cced..b14ebbd7356 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -382,7 +382,7 @@ static int sierra_send_setup(struct usb_serial_port *port)
 static void sierra_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	tty_termios_copy_hw(tty->termios, old_termios);
+	tty_termios_copy_hw(&tty->termios, old_termios);
 	sierra_send_setup(port);
 }
 
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index cad60898471..ab68a4d74d6 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -316,10 +316,10 @@ static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
 static void spcp8x5_init_termios(struct tty_struct *tty)
 {
 	/* for the 1st time call this function */
-	*(tty->termios) = tty_std_termios;
-	tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
-	tty->termios->c_ispeed = 115200;
-	tty->termios->c_ospeed = 115200;
+	tty->termios = tty_std_termios;
+	tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+	tty->termios.c_ispeed = 115200;
+	tty->termios.c_ospeed = 115200;
 }
 
 /* set the serial param for transfer. we should check if we really need to
@@ -330,7 +330,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 	struct usb_serial *serial = port->serial;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	unsigned int cflag = tty->termios->c_cflag;
+	unsigned int cflag = tty->termios.c_cflag;
 	unsigned int old_cflag = old_termios->c_cflag;
 	unsigned short uartdata;
 	unsigned char buf[2] = {0, 0};
@@ -340,7 +340,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 
 
 	/* check that they really want us to change something */
-	if (!tty_termios_hw_change(tty->termios, old_termios))
+	if (!tty_termios_hw_change(&tty->termios, old_termios))
 		return;
 
 	/* set DTR/RTS active */
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 3fee23bf0c1..cf2d30cf758 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -216,7 +216,7 @@ static void ssu100_set_termios(struct tty_struct *tty,
 			       struct ktermios *old_termios)
 {
 	struct usb_device *dev = port->serial->dev;
-	struct ktermios *termios = tty->termios;
+	struct ktermios *termios = &tty->termios;
 	u16 baud, divisor, remainder;
 	unsigned int cflag = termios->c_cflag;
 	u16 urb_value = 0; /* will hold the new flags */
@@ -322,7 +322,7 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
 		dbg("%s - set uart failed", __func__);
 
 	if (tty)
-		ssu100_set_termios(tty, port, tty->termios);
+		ssu100_set_termios(tty, port, &tty->termios);
 
 	return usb_serial_generic_open(tty, port);
 }
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index a4404f5ad68..f502a16aac2 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -520,7 +520,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 	}
 
 	if (tty)
-		ti_set_termios(tty, port, tty->termios);
+		ti_set_termios(tty, port, &tty->termios);
 
 	dbg("%s - sending TI_OPEN_PORT", __func__);
 	status = ti_command_out_sync(tdev, TI_OPEN_PORT,
@@ -562,7 +562,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 	usb_clear_halt(dev, port->read_urb->pipe);
 
 	if (tty)
-		ti_set_termios(tty, port, tty->termios);
+		ti_set_termios(tty, port, &tty->termios);
 
 	dbg("%s - sending TI_OPEN_PORT (2)", __func__);
 	status = ti_command_out_sync(tdev, TI_OPEN_PORT,
@@ -831,8 +831,8 @@ static void ti_set_termios(struct tty_struct *tty,
 	int port_number = port->number - port->serial->minor;
 	unsigned int mcr;
 
-	cflag = tty->termios->c_cflag;
-	iflag = tty->termios->c_iflag;
+	cflag = tty->termios.c_cflag;
+	iflag = tty->termios.c_iflag;
 
 	dbg("%s - cflag %08x, iflag %08x", __func__, cflag, iflag);
 	dbg("%s - old clfag %08x, old iflag %08x", __func__,
@@ -871,7 +871,7 @@ static void ti_set_termios(struct tty_struct *tty,
 	}
 
 	/* CMSPAR isn't supported by this driver */
-	tty->termios->c_cflag &= ~CMSPAR;
+	tty->termios.c_cflag &= ~CMSPAR;
 
 	if (cflag & PARENB) {
 		if (cflag & PARODD) {
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 27483f91a4a..aa4b0d77599 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -207,7 +207,7 @@ static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
 	if (retval)
 		goto error_get_interface;
 
-	retval = tty_standard_install(driver, tty);
+	retval = tty_port_install(&port->port, driver, tty);
 	if (retval)
 		goto error_init_termios;
 
@@ -305,8 +305,7 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
  * Do the resource freeing and refcount dropping for the port.
  * Avoid freeing the console.
  *
- * Called asynchronously after the last tty kref is dropped,
- * and the tty layer has already done the tty_shutdown(tty);
+ * Called asynchronously after the last tty kref is dropped.
  */
 static void serial_cleanup(struct tty_struct *tty)
 {
@@ -423,7 +422,7 @@ static void serial_set_termios(struct tty_struct *tty, struct ktermios *old)
 	if (port->serial->type->set_termios)
 		port->serial->type->set_termios(tty, port, old);
 	else
-		tty_termios_copy_hw(tty->termios, old);
+		tty_termios_copy_hw(&tty->termios, old);
 }
 
 static int serial_break(struct tty_struct *tty, int break_state)
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 6855d5ed033..72b678d9083 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -67,7 +67,7 @@ void usb_wwan_set_termios(struct tty_struct *tty,
 	struct usb_wwan_intf_private *intfdata = port->serial->private;
 
 	/* Doesn't support option setting */
-	tty_termios_copy_hw(tty->termios, old_termios);
+	tty_termios_copy_hw(&tty->termios, old_termios);
 
 	if (intfdata->send_setup)
 		intfdata->send_setup(port);
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 473635e7f5d..b36077de72b 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -724,7 +724,7 @@ static void firm_setup_port(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_port_settings port_settings;
-	unsigned int cflag = tty->termios->c_cflag;
+	unsigned int cflag = tty->termios.c_cflag;
 
 	port_settings.port = port->number + 1;