Merge branch 'master' into next

Conflicts:
	security/smack/smack_lsm.c

Verified and added fix by Stephen Rothwell <sfr@canb.auug.org.au>
Ok'd by Casey Schaufler <casey@schaufler-ca.com>

Signed-off-by: James Morris <jmorris@namei.org>

111 files changed, 15319 insertions, 1979 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 67eb3770868..fceea5e4e02 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -41,17 +41,14 @@ config USB_ARCH_HAS_OHCI
 	default y if MFD_TC6393XB
 	default y if ARCH_W90X900
 	default y if ARCH_DAVINCI_DA8XX
+	default y if ARCH_CNS3XXX
+	default y if PLAT_SPEAR
 	# PPC:
 	default y if STB03xxx
 	default y if PPC_MPC52xx
 	# MIPS:
 	default y if MIPS_ALCHEMY
 	default y if MACH_JZ4740
-	# SH:
-	default y if CPU_SUBTYPE_SH7720
-	default y if CPU_SUBTYPE_SH7721
-	default y if CPU_SUBTYPE_SH7763
-	default y if CPU_SUBTYPE_SH7786
 	# more:
 	default PCI
 
@@ -66,6 +63,10 @@ config USB_ARCH_HAS_EHCI
 	default y if ARCH_AT91SAM9G45
 	default y if ARCH_MXC
 	default y if ARCH_OMAP3
+	default y if ARCH_CNS3XXX
+	default y if ARCH_VT8500
+	default y if PLAT_SPEAR
+	default y if ARCH_MSM
 	default PCI
 
 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index f383cb42b1d..a845f8b8382 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -1247,7 +1247,7 @@ static void cxacru_unbind(struct usbatm_data *usbatm_instance,
 	mutex_unlock(&instance->poll_state_serialize);
 
 	if (is_polling)
-		cancel_rearming_delayed_work(&instance->poll_work);
+		cancel_delayed_work_sync(&instance->poll_work);
 
 	usb_kill_urb(instance->snd_urb);
 	usb_kill_urb(instance->rcv_urb);
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 4716e707de5..0842cfbf60c 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -139,7 +139,8 @@ struct speedtch_instance_data {
 
 	struct speedtch_params params; /* set in probe, constant afterwards */
 
-	struct delayed_work status_checker;
+	struct timer_list status_check_timer;
+	struct work_struct status_check_work;
 
 	unsigned char last_status;
 
@@ -498,7 +499,7 @@ static void speedtch_check_status(struct work_struct *work)
 {
 	struct speedtch_instance_data *instance =
 		container_of(work, struct speedtch_instance_data,
-			     status_checker.work);
+			     status_check_work);
 	struct usbatm_data *usbatm = instance->usbatm;
 	struct atm_dev *atm_dev = usbatm->atm_dev;
 	unsigned char *buf = instance->scratch_buffer;
@@ -575,11 +576,11 @@ static void speedtch_status_poll(unsigned long data)
 {
 	struct speedtch_instance_data *instance = (void *)data;
 
-	schedule_delayed_work(&instance->status_checker, 0);
+	schedule_work(&instance->status_check_work);
 
 	/* The following check is racy, but the race is harmless */
 	if (instance->poll_delay < MAX_POLL_DELAY)
-		mod_timer(&instance->status_checker.timer, jiffies + msecs_to_jiffies(instance->poll_delay));
+		mod_timer(&instance->status_check_timer, jiffies + msecs_to_jiffies(instance->poll_delay));
 	else
 		atm_warn(instance->usbatm, "Too many failures - disabling line status polling\n");
 }
@@ -595,7 +596,7 @@ static void speedtch_resubmit_int(unsigned long data)
 	if (int_urb) {
 		ret = usb_submit_urb(int_urb, GFP_ATOMIC);
 		if (!ret)
-			schedule_delayed_work(&instance->status_checker, 0);
+			schedule_work(&instance->status_check_work);
 		else {
 			atm_dbg(instance->usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
 			mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY));
@@ -624,7 +625,7 @@ static void speedtch_handle_int(struct urb *int_urb)
 	}
 
 	if ((count == 6) && !memcmp(up_int, instance->int_data, 6)) {
-		del_timer(&instance->status_checker.timer);
+		del_timer(&instance->status_check_timer);
 		atm_info(usbatm, "DSL line goes up\n");
 	} else if ((count == 6) && !memcmp(down_int, instance->int_data, 6)) {
 		atm_info(usbatm, "DSL line goes down\n");
@@ -640,7 +641,7 @@ static void speedtch_handle_int(struct urb *int_urb)
 
 	if ((int_urb = instance->int_urb)) {
 		ret = usb_submit_urb(int_urb, GFP_ATOMIC);
-		schedule_delayed_work(&instance->status_checker, 0);
+		schedule_work(&instance->status_check_work);
 		if (ret < 0) {
 			atm_dbg(usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
 			goto fail;
@@ -686,7 +687,7 @@ static int speedtch_atm_start(struct usbatm_data *usbatm, struct atm_dev *atm_de
 	}
 
 	/* Start status polling */
-	mod_timer(&instance->status_checker.timer, jiffies + msecs_to_jiffies(1000));
+	mod_timer(&instance->status_check_timer, jiffies + msecs_to_jiffies(1000));
 
 	return 0;
 }
@@ -698,7 +699,7 @@ static void speedtch_atm_stop(struct usbatm_data *usbatm, struct atm_dev *atm_de
 
 	atm_dbg(usbatm, "%s entered\n", __func__);
 
-	del_timer_sync(&instance->status_checker.timer);
+	del_timer_sync(&instance->status_check_timer);
 
 	/*
 	 * Since resubmit_timer and int_urb can schedule themselves and
@@ -717,7 +718,7 @@ static void speedtch_atm_stop(struct usbatm_data *usbatm, struct atm_dev *atm_de
 	del_timer_sync(&instance->resubmit_timer);
 	usb_free_urb(int_urb);
 
-	flush_scheduled_work();
+	flush_work_sync(&instance->status_check_work);
 }
 
 static int speedtch_pre_reset(struct usb_interface *intf)
@@ -869,10 +870,11 @@ static int speedtch_bind(struct usbatm_data *usbatm,
 
 	usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0);
 
-	INIT_DELAYED_WORK(&instance->status_checker, speedtch_check_status);
+	INIT_WORK(&instance->status_check_work, speedtch_check_status);
+	init_timer(&instance->status_check_timer);
 
-	instance->status_checker.timer.function = speedtch_status_poll;
-	instance->status_checker.timer.data = (unsigned long)instance;
+	instance->status_check_timer.function = speedtch_status_poll;
+	instance->status_check_timer.data = (unsigned long)instance;
 	instance->last_status = 0xff;
 	instance->poll_delay = MIN_POLL_DELAY;
 
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 44447f54942..99ac70e3255 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -2206,8 +2206,11 @@ static int uea_boot(struct uea_softc *sc)
 		goto err1;
 	}
 
-	sc->kthread = kthread_run(uea_kthread, sc, "ueagle-atm");
-	if (sc->kthread == ERR_PTR(-ENOMEM)) {
+	/* Create worker thread, but don't start it here.  Start it after
+	 * all usbatm generic initialization is done.
+	 */
+	sc->kthread = kthread_create(uea_kthread, sc, "ueagle-atm");
+	if (IS_ERR(sc->kthread)) {
 		uea_err(INS_TO_USBDEV(sc), "failed to create thread\n");
 		goto err2;
 	}
@@ -2624,6 +2627,7 @@ static struct usbatm_driver uea_usbatm_driver = {
 static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
 	struct usb_device *usb = interface_to_usbdev(intf);
+	int ret;
 
 	uea_enters(usb);
 	uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) Rev (%#X): %s\n",
@@ -2637,7 +2641,19 @@ static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	if (UEA_IS_PREFIRM(id))
 		return uea_load_firmware(usb, UEA_CHIP_VERSION(id));
 
-	return usbatm_usb_probe(intf, id, &uea_usbatm_driver);
+	ret = usbatm_usb_probe(intf, id, &uea_usbatm_driver);
+	if (ret == 0) {
+		struct usbatm_data *usbatm = usb_get_intfdata(intf);
+		struct uea_softc *sc = usbatm->driver_data;
+
+		/* Ensure carrier is initialized to off as early as possible */
+		UPDATE_ATM_SIGNAL(ATM_PHY_SIG_LOST);
+
+		/* Only start the worker thread when all init is done */
+		wake_up_process(sc->kthread);
+	}
+
+	return ret;
 }
 
 static void uea_disconnect(struct usb_interface *intf)
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index 05bf5a27b5b..989e16e4ab5 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -951,7 +951,9 @@ static int usbatm_atm_init(struct usbatm_data *instance)
 	 * condition: callbacks we register can be executed at once, before we have
 	 * initialized the struct atm_dev.  To protect against this, all callbacks
 	 * abort if atm_dev->dev_data is NULL. */
-	atm_dev = atm_dev_register(instance->driver_name, &usbatm_atm_devops, -1, NULL);
+	atm_dev = atm_dev_register(instance->driver_name,
+				   &instance->usb_intf->dev, &usbatm_atm_devops,
+				   -1, NULL);
 	if (!atm_dev) {
 		usb_err(instance, "%s: failed to register ATM device!\n", __func__);
 		return -1;
@@ -966,14 +968,6 @@ static int usbatm_atm_init(struct usbatm_data *instance)
 	/* temp init ATM device, set to 128kbit */
 	atm_dev->link_rate = 128 * 1000 / 424;
 
-	ret = sysfs_create_link(&atm_dev->class_dev.kobj,
-				&instance->usb_intf->dev.kobj, "device");
-	if (ret) {
-		atm_err(instance, "%s: sysfs_create_link failed: %d\n",
-					__func__, ret);
-		goto fail_sysfs;
-	}
-
 	if (instance->driver->atm_start && ((ret = instance->driver->atm_start(instance, atm_dev)) < 0)) {
 		atm_err(instance, "%s: atm_start failed: %d!\n", __func__, ret);
 		goto fail;
@@ -992,8 +986,6 @@ static int usbatm_atm_init(struct usbatm_data *instance)
 	return 0;
 
  fail:
-	sysfs_remove_link(&atm_dev->class_dev.kobj, "device");
- fail_sysfs:
 	instance->atm_dev = NULL;
 	atm_dev_deregister(atm_dev); /* usbatm_atm_dev_close will eventually be called */
 	return ret;
@@ -1329,7 +1321,6 @@ void usbatm_usb_disconnect(struct usb_interface *intf)
 
 	/* ATM finalize */
 	if (instance->atm_dev) {
-		sysfs_remove_link(&instance->atm_dev->class_dev.kobj, "device");
 		atm_dev_deregister(instance->atm_dev);
 		instance->atm_dev = NULL;
 	}
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 9eed5b52d9d..bcc24779ba0 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -107,11 +107,19 @@ config USB_SUSPEND
 	  If you are unsure about this, say N here.
 
 config USB_OTG
-	bool
+	bool "OTG support"
 	depends on USB && EXPERIMENTAL
 	depends on USB_SUSPEND
 	default n
-
+	help
+	  The most notable feature of USB OTG is support for a
+	  "Dual-Role" device, which can act as either a device
+	  or a host. The initial role is decided by the type of
+	  plug inserted and can be changed later when two dual
+	  role devices talk to each other.
+
+	  Select this only if your board has Mini-AB/Micro-AB
+	  connector.
 
 config USB_OTG_WHITELIST
 	bool "Rely on OTG Targeted Peripherals List"
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index c0e60fbcb04..b9278a1fb9e 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -27,7 +27,6 @@
 #include <linux/usb.h>
 #include <linux/usb/quirks.h>
 #include <linux/usb/hcd.h>
-#include <linux/pm_runtime.h>
 
 #include "usb.h"
 
@@ -1262,6 +1261,7 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg)
 					udev->reset_resume);
 		}
 	}
+	usb_mark_last_busy(udev);
 
  done:
 	dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status);
@@ -1329,7 +1329,6 @@ int usb_resume(struct device *dev, pm_message_t msg)
 			pm_runtime_disable(dev);
 			pm_runtime_set_active(dev);
 			pm_runtime_enable(dev);
-			udev->last_busy = jiffies;
 			do_unbind_rebind(udev, DO_REBIND);
 		}
 	}
@@ -1397,33 +1396,8 @@ void usb_autosuspend_device(struct usb_device *udev)
 {
 	int	status;
 
-	udev->last_busy = jiffies;
-	status = pm_runtime_put_sync(&udev->dev);
-	dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n",
-			__func__, atomic_read(&udev->dev.power.usage_count),
-			status);
-}
-
-/**
- * usb_try_autosuspend_device - attempt an autosuspend of a USB device and its interfaces
- * @udev: the usb_device to autosuspend
- *
- * This routine should be called when a core subsystem thinks @udev may
- * be ready to autosuspend.
- *
- * @udev's usage counter left unchanged.  If it is 0 and all the interfaces
- * are inactive then an autosuspend will be attempted.  The attempt may
- * fail or be delayed.
- *
- * The caller must hold @udev's device lock.
- *
- * This routine can run only in process context.
- */
-void usb_try_autosuspend_device(struct usb_device *udev)
-{
-	int	status;
-
-	status = pm_runtime_idle(&udev->dev);
+	usb_mark_last_busy(udev);
+	status = pm_runtime_put_sync_autosuspend(&udev->dev);
 	dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n",
 			__func__, atomic_read(&udev->dev.power.usage_count),
 			status);
@@ -1482,7 +1456,7 @@ void usb_autopm_put_interface(struct usb_interface *intf)
 	struct usb_device	*udev = interface_to_usbdev(intf);
 	int			status;
 
-	udev->last_busy = jiffies;
+	usb_mark_last_busy(udev);
 	atomic_dec(&intf->pm_usage_cnt);
 	status = pm_runtime_put_sync(&intf->dev);
 	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
@@ -1509,32 +1483,11 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
 void usb_autopm_put_interface_async(struct usb_interface *intf)
 {
 	struct usb_device	*udev = interface_to_usbdev(intf);
-	unsigned long		last_busy;
-	int			status = 0;
+	int			status;
 
-	last_busy = udev->last_busy;
-	udev->last_busy = jiffies;
+	usb_mark_last_busy(udev);
 	atomic_dec(&intf->pm_usage_cnt);
-	pm_runtime_put_noidle(&intf->dev);
-
-	if (udev->dev.power.runtime_auto) {
-		/* Optimization: Don't schedule a delayed autosuspend if
-		 * the timer is already running and the expiration time
-		 * wouldn't change.
-		 *
-		 * We have to use the interface's timer.  Attempts to
-		 * schedule a suspend for the device would fail because
-		 * the interface is still active.
-		 */
-		if (intf->dev.power.timer_expires == 0 ||
-				round_jiffies_up(last_busy) !=
-				round_jiffies_up(jiffies)) {
-			status = pm_schedule_suspend(&intf->dev,
-					jiffies_to_msecs(
-					round_jiffies_up_relative(
-						udev->autosuspend_delay)));
-		}
-	}
+	status = pm_runtime_put(&intf->dev);
 	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
 			__func__, atomic_read(&intf->dev.power.usage_count),
 			status);
@@ -1554,7 +1507,7 @@ void usb_autopm_put_interface_no_suspend(struct usb_interface *intf)
 {
 	struct usb_device	*udev = interface_to_usbdev(intf);
 
-	udev->last_busy = jiffies;
+	usb_mark_last_busy(udev);
 	atomic_dec(&intf->pm_usage_cnt);
 	pm_runtime_put_noidle(&intf->dev);
 }
@@ -1612,18 +1565,9 @@ EXPORT_SYMBOL_GPL(usb_autopm_get_interface);
  */
 int usb_autopm_get_interface_async(struct usb_interface *intf)
 {
-	int		status = 0;
-	enum rpm_status	s;
-
-	/* Don't request a resume unless the interface is already suspending
-	 * or suspended.  Doing so would force a running suspend timer to be
-	 * cancelled.
-	 */
-	pm_runtime_get_noresume(&intf->dev);
-	s = ACCESS_ONCE(intf->dev.power.runtime_status);
-	if (s == RPM_SUSPENDING || s == RPM_SUSPENDED)
-		status = pm_request_resume(&intf->dev);
+	int	status;
 
+	status = pm_runtime_get(&intf->dev);
 	if (status < 0 && status != -EINPROGRESS)
 		pm_runtime_put_noidle(&intf->dev);
 	else
@@ -1650,7 +1594,7 @@ void usb_autopm_get_interface_no_resume(struct usb_interface *intf)
 {
 	struct usb_device	*udev = interface_to_usbdev(intf);
 
-	udev->last_busy = jiffies;
+	usb_mark_last_busy(udev);
 	atomic_inc(&intf->pm_usage_cnt);
 	pm_runtime_get_noresume(&intf->dev);
 }
@@ -1661,7 +1605,6 @@ static int autosuspend_check(struct usb_device *udev)
 {
 	int			w, i;
 	struct usb_interface	*intf;
-	unsigned long		suspend_time, j;
 
 	/* Fail if autosuspend is disabled, or any interfaces are in use, or
 	 * any interface drivers require remote wakeup but it isn't available.
@@ -1701,87 +1644,46 @@ static int autosuspend_check(struct usb_device *udev)
 		return -EOPNOTSUPP;
 	}
 	udev->do_remote_wakeup = w;
-
-	/* If everything is okay but the device hasn't been idle for long
-	 * enough, queue a delayed autosuspend request.
-	 */
-	j = ACCESS_ONCE(jiffies);
-	suspend_time = udev->last_busy + udev->autosuspend_delay;
-	if (time_before(j, suspend_time)) {
-		pm_schedule_suspend(&udev->dev, jiffies_to_msecs(
-				round_jiffies_up_relative(suspend_time - j)));
-		return -EAGAIN;
-	}
 	return 0;
 }
 
 static int usb_runtime_suspend(struct device *dev)
 {
-	int	status = 0;
+	struct usb_device	*udev = to_usb_device(dev);
+	int			status;
 
 	/* A USB device can be suspended if it passes the various autosuspend
 	 * checks.  Runtime suspend for a USB device means suspending all the
 	 * interfaces and then the device itself.
 	 */
-	if (is_usb_device(dev)) {
-		struct usb_device	*udev = to_usb_device(dev);
-
-		if (autosuspend_check(udev) != 0)
-			return -EAGAIN;
-
-		status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND);
-
-		/* If an interface fails the suspend, adjust the last_busy
-		 * time so that we don't get another suspend attempt right
-		 * away.
-		 */
-		if (status) {
-			udev->last_busy = jiffies +
-					(udev->autosuspend_delay == 0 ?
-						HZ/2 : 0);
-		}
-
-		/* Prevent the parent from suspending immediately after */
-		else if (udev->parent)
-			udev->parent->last_busy = jiffies;
-	}
+	if (autosuspend_check(udev) != 0)
+		return -EAGAIN;
 
-	/* Runtime suspend for a USB interface doesn't mean anything. */
+	status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND);
 	return status;
 }
 
 static int usb_runtime_resume(struct device *dev)
 {
+	struct usb_device	*udev = to_usb_device(dev);
+	int			status;
+
 	/* Runtime resume for a USB device means resuming both the device
 	 * and all its interfaces.
 	 */
-	if (is_usb_device(dev)) {
-		struct usb_device	*udev = to_usb_device(dev);
-		int			status;
-
-		status = usb_resume_both(udev, PMSG_AUTO_RESUME);
-		udev->last_busy = jiffies;
-		return status;
-	}
-
-	/* Runtime resume for a USB interface doesn't mean anything. */
-	return 0;
+	status = usb_resume_both(udev, PMSG_AUTO_RESUME);
+	return status;
 }
 
 static int usb_runtime_idle(struct device *dev)
 {
+	struct usb_device	*udev = to_usb_device(dev);
+
 	/* An idle USB device can be suspended if it passes the various
-	 * autosuspend checks.  An idle interface can be suspended at
-	 * any time.
+	 * autosuspend checks.
 	 */
-	if (is_usb_device(dev)) {
-		struct usb_device	*udev = to_usb_device(dev);
-
-		if (autosuspend_check(udev) != 0)
-			return 0;
-	}
-
-	pm_runtime_suspend(dev);
+	if (autosuspend_check(udev) == 0)
+		pm_runtime_autosuspend(dev);
 	return 0;
 }
 
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 3799573bd38..b55d46070a2 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -19,7 +19,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
-#include <linux/pm_runtime.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 61800f77dac..6a95017fa62 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -38,7 +38,6 @@
 #include <asm/unaligned.h>
 #include <linux/platform_device.h>
 #include <linux/workqueue.h>
-#include <linux/pm_runtime.h>
 
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
@@ -1330,6 +1329,8 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 	 */
 
 	if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+		if (hcd->self.uses_pio_for_control)
+			return ret;
 		if (hcd->self.uses_dma) {
 			urb->setup_dma = dma_map_single(
 					hcd->self.controller,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 27115b45edc..b98efae6a1c 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -24,7 +24,6 @@
 #include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <linux/freezer.h>
-#include <linux/pm_runtime.h>
 
 #include <asm/uaccess.h>
 #include <asm/byteorder.h>
@@ -1804,8 +1803,15 @@ int usb_new_device(struct usb_device *udev)
 
 	/* Tell the runtime-PM framework the device is active */
 	pm_runtime_set_active(&udev->dev);
+	pm_runtime_get_noresume(&udev->dev);
+	pm_runtime_use_autosuspend(&udev->dev);
 	pm_runtime_enable(&udev->dev);
 
+	/* By default, forbid autosuspend for all devices.  It will be
+	 * allowed for hubs during binding.
+	 */
+	usb_disable_autosuspend(udev);
+
 	err = usb_enumerate_device(udev);	/* Read descriptors */
 	if (err < 0)
 		goto fail;
@@ -1831,6 +1837,8 @@ int usb_new_device(struct usb_device *udev)
 	}
 
 	(void) usb_create_ep_devs(&udev->dev, &udev->ep0, udev);
+	usb_mark_last_busy(udev);
+	pm_runtime_put_sync_autosuspend(&udev->dev);
 	return err;
 
 fail:
@@ -2221,6 +2229,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 		usb_set_device_state(udev, USB_STATE_SUSPENDED);
 		msleep(10);
 	}
+	usb_mark_last_busy(hub->hdev);
 	return status;
 }
 
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index b690aa35df9..1b125c224dc 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -343,17 +343,19 @@ static int usbfs_empty (struct dentry *dentry)
 {
 	struct list_head *list;
 
-	spin_lock(&dcache_lock);
-
+	spin_lock(&dentry->d_lock);
 	list_for_each(list, &dentry->d_subdirs) {
 		struct dentry *de = list_entry(list, struct dentry, d_u.d_child);
+
+		spin_lock_nested(&de->d_lock, DENTRY_D_LOCK_NESTED);
 		if (usbfs_positive(de)) {
-			spin_unlock(&dcache_lock);
+			spin_unlock(&de->d_lock);
+			spin_unlock(&dentry->d_lock);
 			return 0;
 		}
+		spin_unlock(&de->d_lock);
 	}
-
-	spin_unlock(&dcache_lock);
+	spin_unlock(&dentry->d_lock);
 	return 1;
 }
 
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index d6e3e410477..83248742382 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1804,6 +1804,7 @@ free_interfaces:
 		INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
 		intf->minor = -1;
 		device_initialize(&intf->dev);
+		pm_runtime_no_callbacks(&intf->dev);
 		dev_set_name(&intf->dev, "%d-%s:%d.%d",
 			dev->bus->busnum, dev->devpath,
 			configuration, alt->desc.bInterfaceNumber);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 25719da45e3..44c595432d6 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -117,21 +117,6 @@ void usb_detect_quirks(struct usb_device *udev)
 		dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
 				udev->quirks);
 
-#ifdef	CONFIG_USB_SUSPEND
-
-	/* By default, disable autosuspend for all devices.  The hub driver
-	 * will enable it for hubs.
-	 */
-	usb_disable_autosuspend(udev);
-
-	/* Autosuspend can also be disabled if the initial autosuspend_delay
-	 * is negative.
-	 */
-	if (udev->autosuspend_delay < 0)
-		usb_autoresume_device(udev);
-
-#endif
-
 	/* For the present, all devices default to USB-PERSIST enabled */
 #if 0		/* was: #ifdef CONFIG_PM */
 	/* Hubs are automatically enabled for USB-PERSIST */
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 448f5b47fc4..6781c369ce2 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -233,8 +233,6 @@ static DEVICE_ATTR(urbnum, S_IRUGO, show_urbnum, NULL);
 
 #ifdef	CONFIG_PM
 
-static const char power_group[] = "power";
-
 static ssize_t
 show_persist(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -278,7 +276,7 @@ static int add_persist_attributes(struct device *dev)
 		if (udev->descriptor.bDeviceClass != USB_CLASS_HUB)
 			rc = sysfs_add_file_to_group(&dev->kobj,
 					&dev_attr_persist.attr,
-					power_group);
+					power_group_name);
 	}
 	return rc;
 }
@@ -287,7 +285,7 @@ static void remove_persist_attributes(struct device *dev)
 {
 	sysfs_remove_file_from_group(&dev->kobj,
 			&dev_attr_persist.attr,
-			power_group);
+			power_group_name);
 }
 #else
 
@@ -336,44 +334,20 @@ static DEVICE_ATTR(active_duration, S_IRUGO, show_active_duration, NULL);
 static ssize_t
 show_autosuspend(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	struct usb_device *udev = to_usb_device(dev);
-
-	return sprintf(buf, "%d\n", udev->autosuspend_delay / HZ);
+	return sprintf(buf, "%d\n", dev->power.autosuspend_delay / 1000);
 }
 
 static ssize_t
 set_autosuspend(struct device *dev, struct device_attribute *attr,
 		const char *buf, size_t count)
 {
-	struct usb_device *udev = to_usb_device(dev);
-	int value, old_delay;
-	int rc;
+	int value;
 
-	if (sscanf(buf, "%d", &value) != 1 || value >= INT_MAX/HZ ||
-			value <= - INT_MAX/HZ)
+	if (sscanf(buf, "%d", &value) != 1 || value >= INT_MAX/1000 ||
+			value <= -INT_MAX/1000)
 		return -EINVAL;
-	value *= HZ;
-
-	usb_lock_device(udev);
-	old_delay = udev->autosuspend_delay;
-	udev->autosuspend_delay = value;
-
-	if (old_delay < 0) {	/* Autosuspend wasn't allowed */
-		if (value >= 0)
-			usb_autosuspend_device(udev);
-	} else {		/* Autosuspend was allowed */
-		if (value < 0) {
-			rc = usb_autoresume_device(udev);
-			if (rc < 0) {
-				count = rc;
-				udev->autosuspend_delay = old_delay;
-			}
-		} else {
-			usb_try_autosuspend_device(udev);
-		}
-	}
 
-	usb_unlock_device(udev);
+	pm_runtime_set_autosuspend_delay(dev, value * 1000);
 	return count;
 }
 
@@ -438,44 +412,30 @@ set_level(struct device *dev, struct device_attribute *attr,
 
 static DEVICE_ATTR(level, S_IRUGO | S_IWUSR, show_level, set_level);
 
+static struct attribute *power_attrs[] = {
+	&dev_attr_autosuspend.attr,
+	&dev_attr_level.attr,
+	&dev_attr_connected_duration.attr,
+	&dev_attr_active_duration.attr,
+	NULL,
+};
+static struct attribute_group power_attr_group = {
+	.name	= power_group_name,
+	.attrs	= power_attrs,
+};
+
 static int add_power_attributes(struct device *dev)
 {
 	int rc = 0;
 
-	if (is_usb_device(dev)) {
-		rc = sysfs_add_file_to_group(&dev->kobj,
-				&dev_attr_autosuspend.attr,
-				power_group);
-		if (rc == 0)
-			rc = sysfs_add_file_to_group(&dev->kobj,
-					&dev_attr_level.attr,
-					power_group);
-		if (rc == 0)
-			rc = sysfs_add_file_to_group(&dev->kobj,
-					&dev_attr_connected_duration.attr,
-					power_group);
-		if (rc == 0)
-			rc = sysfs_add_file_to_group(&dev->kobj,
-					&dev_attr_active_duration.attr,
-					power_group);
-	}
+	if (is_usb_device(dev))
+		rc = sysfs_merge_group(&dev->kobj, &power_attr_group);
 	return rc;
 }
 
 static void remove_power_attributes(struct device *dev)
 {
-	sysfs_remove_file_from_group(&dev->kobj,
-			&dev_attr_active_duration.attr,
-			power_group);
-	sysfs_remove_file_from_group(&dev->kobj,
-			&dev_attr_connected_duration.attr,
-			power_group);
-	sysfs_remove_file_from_group(&dev->kobj,
-			&dev_attr_level.attr,
-			power_group);
-	sysfs_remove_file_from_group(&dev->kobj,
-			&dev_attr_autosuspend.attr,
-			power_group);
+	sysfs_unmerge_group(&dev->kobj, &power_attr_group);
 }
 
 #else
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index fdd4130fbb7..079cb57bab4 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -445,7 +445,8 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 	INIT_LIST_HEAD(&dev->filelist);
 
 #ifdef	CONFIG_PM
-	dev->autosuspend_delay = usb_autosuspend_delay * HZ;
+	pm_runtime_set_autosuspend_delay(&dev->dev,
+			usb_autosuspend_delay * 1000);
 	dev->connect_time = jiffies;
 	dev->active_duration = -jiffies;
 #endif
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index cd882203ad3..b975450f403 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -75,14 +75,12 @@ static inline int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 #ifdef CONFIG_USB_SUSPEND
 
 extern void usb_autosuspend_device(struct usb_device *udev);
-extern void usb_try_autosuspend_device(struct usb_device *udev);
 extern int usb_autoresume_device(struct usb_device *udev);
 extern int usb_remote_wakeup(struct usb_device *dev);
 
 #else
 
 #define usb_autosuspend_device(udev)		do {} while (0)
-#define usb_try_autosuspend_device(udev)	do {} while (0)
 static inline int usb_autoresume_device(struct usb_device *udev)
 {
 	return 0;
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 607d0db4a98..1dc9739277b 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -338,6 +338,19 @@ config USB_S3C2410_DEBUG
 	boolean "S3C2410 udc debug messages"
 	depends on USB_GADGET_S3C2410
 
+config USB_GADGET_PXA_U2O
+	boolean "PXA9xx Processor USB2.0 controller"
+	select USB_GADGET_DUALSPEED
+	help
+	  PXA9xx Processor series include a high speed USB2.0 device
+	  controller, which support high speed and full speed USB peripheral.
+
+config USB_PXA_U2O
+	tristate
+	depends on USB_GADGET_PXA_U2O
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
 #
 # Controllers available in both integrated and discrete versions
 #
@@ -414,8 +427,8 @@ config USB_FSL_QE
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
-config USB_GADGET_CI13XXX
-	boolean "MIPS USB CI13xxx"
+config USB_GADGET_CI13XXX_PCI
+	boolean "MIPS USB CI13xxx PCI UDC"
 	depends on PCI
 	select USB_GADGET_DUALSPEED
 	help
@@ -426,9 +439,9 @@ config USB_GADGET_CI13XXX
 	  dynamically linked module called "ci13xxx_udc" and force all
 	  gadget drivers to also be dynamically linked.
 
-config USB_CI13XXX
+config USB_CI13XXX_PCI
 	tristate
-	depends on USB_GADGET_CI13XXX
+	depends on USB_GADGET_CI13XXX_PCI
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
@@ -495,6 +508,49 @@ config USB_LANGWELL
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+config USB_GADGET_EG20T
+	boolean "Intel EG20T(Topcliff) USB Device controller"
+	depends on PCI
+	select USB_GADGET_DUALSPEED
+	help
+	  This is a USB device driver for EG20T PCH.
+	  EG20T PCH is the platform controller hub that is used in Intel's
+	  general embedded platform. EG20T PCH has USB device interface.
+	  Using this interface, it is able to access system devices connected
+	  to USB device.
+	  This driver enables USB device function.
+	  USB device is a USB peripheral controller which
+	  supports both full and high speed USB 2.0 data transfers.
+	  This driver supports both control transfer and bulk transfer modes.
+	  This driver dose not support interrupt transfer or isochronous
+	  transfer modes.
+
+config USB_EG20T
+	tristate
+	depends on USB_GADGET_EG20T
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
+config USB_GADGET_CI13XXX_MSM
+	boolean "MIPS USB CI13xxx for MSM"
+	depends on ARCH_MSM
+	select USB_GADGET_DUALSPEED
+	select USB_MSM_OTG_72K
+	help
+	  MSM SoC has chipidea USB controller.  This driver uses
+	  ci13xxx_udc core.
+	  This driver depends on OTG driver for PHY initialization,
+	  clock management, powering up VBUS, and power management.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "ci13xxx_msm" and force all
+	  gadget drivers to also be dynamically linked.
+
+config USB_CI13XXX_MSM
+	tristate
+	depends on USB_GADGET_CI13XXX_MSM
+	default USB_GADGET
+	select USB_GADGET_SELECTED
 
 #
 # LAST -- dummy/emulated controller
@@ -685,6 +741,19 @@ config USB_ETH_EEM
          If you say "y" here, the Ethernet gadget driver will use the EEM
          protocol rather than ECM.  If unsure, say "n".
 
+config USB_G_NCM
+	tristate "Network Control Model (NCM) support"
+	depends on NET
+	select CRC32
+	help
+	  This driver implements USB CDC NCM subclass standard. NCM is
+	  an advanced protocol for Ethernet encapsulation, allows grouping
+	  of several ethernet frames into one USB transfer and diffferent
+	  alignment possibilities.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_ncm".
+
 config USB_GADGETFS
 	tristate "Gadget Filesystem (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 5780db42417..55f5e8ae592 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -21,9 +21,13 @@ fsl_usb2_udc-$(CONFIG_ARCH_MXC)	+= fsl_mxc_udc.o
 obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
 obj-$(CONFIG_USB_R8A66597)	+= r8a66597-udc.o
 obj-$(CONFIG_USB_FSL_QE)	+= fsl_qe_udc.o
-obj-$(CONFIG_USB_CI13XXX)	+= ci13xxx_udc.o
+obj-$(CONFIG_USB_CI13XXX_PCI)	+= ci13xxx_pci.o
 obj-$(CONFIG_USB_S3C_HSOTG)	+= s3c-hsotg.o
 obj-$(CONFIG_USB_LANGWELL)	+= langwell_udc.o
+obj-$(CONFIG_USB_EG20T)		+= pch_udc.o
+obj-$(CONFIG_USB_PXA_U2O)	+= mv_udc.o
+mv_udc-y			:= mv_udc_core.o mv_udc_phy.o
+obj-$(CONFIG_USB_CI13XXX_MSM)	+= ci13xxx_msm.o
 
 #
 # USB gadget drivers
@@ -43,6 +47,7 @@ g_hid-y				:= hid.o
 g_dbgp-y			:= dbgp.o
 g_nokia-y			:= nokia.o
 g_webcam-y			:= webcam.o
+g_ncm-y				:= ncm.o
 
 obj-$(CONFIG_USB_ZERO)		+= g_zero.o
 obj-$(CONFIG_USB_AUDIO)		+= g_audio.o
@@ -60,3 +65,4 @@ obj-$(CONFIG_USB_G_DBGP)	+= g_dbgp.o
 obj-$(CONFIG_USB_G_MULTI)	+= g_multi.o
 obj-$(CONFIG_USB_G_NOKIA)	+= g_nokia.o
 obj-$(CONFIG_USB_G_WEBCAM)	+= g_webcam.o
+obj-$(CONFIG_USB_G_NCM)		+= g_ncm.o
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 9034e034472..f8dd7269d79 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -3359,7 +3359,6 @@ static int udc_probe(struct udc *dev)
 	dev_set_name(&dev->gadget.dev, "gadget");
 	dev->gadget.dev.release = gadget_release;
 	dev->gadget.name = name;
-	dev->gadget.name = name;
 	dev->gadget.is_dualspeed = 1;
 
 	/* init registers, interrupts, ... */
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 717ff653fa2..e7c65a4408f 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -2057,8 +2057,10 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
 		usba_ep_cleanup_debugfs(&usba_ep[i]);
 	usba_cleanup_debugfs(udc);
 
-	if (gpio_is_valid(udc->vbus_pin))
+	if (gpio_is_valid(udc->vbus_pin)) {
+		free_irq(gpio_to_irq(udc->vbus_pin), udc);
 		gpio_free(udc->vbus_pin);
+	}
 
 	free_irq(udc->irq, udc);
 	kfree(usba_ep);
diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c
new file mode 100644
index 00000000000..139ac941959
--- /dev/null
+++ b/drivers/usb/gadget/ci13xxx_msm.c
@@ -0,0 +1,134 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/usb/msm_hsusb_hw.h>
+#include <linux/usb/ulpi.h>
+
+#include "ci13xxx_udc.c"
+
+#define MSM_USB_BASE	(udc->regs)
+
+static irqreturn_t msm_udc_irq(int irq, void *data)
+{
+	return udc_irq();
+}
+
+static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event)
+{
+	struct device *dev = udc->gadget.dev.parent;
+	int val;
+
+	switch (event) {
+	case CI13XXX_CONTROLLER_RESET_EVENT:
+		dev_dbg(dev, "CI13XXX_CONTROLLER_RESET_EVENT received\n");
+		writel(0, USB_AHBBURST);
+		writel(0, USB_AHBMODE);
+		break;
+	case CI13XXX_CONTROLLER_STOPPED_EVENT:
+		dev_dbg(dev, "CI13XXX_CONTROLLER_STOPPED_EVENT received\n");
+		/*
+		 * Put the transceiver in non-driving mode. Otherwise host
+		 * may not detect soft-disconnection.
+		 */
+		val = otg_io_read(udc->transceiver, ULPI_FUNC_CTRL);
+		val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
+		val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
+		otg_io_write(udc->transceiver, val, ULPI_FUNC_CTRL);
+		break;
+	default:
+		dev_dbg(dev, "unknown ci13xxx_udc event\n");
+		break;
+	}
+}
+
+static struct ci13xxx_udc_driver ci13xxx_msm_udc_driver = {
+	.name			= "ci13xxx_msm",
+	.flags			= CI13XXX_REGS_SHARED |
+				  CI13XXX_REQUIRE_TRANSCEIVER |
+				  CI13XXX_PULLUP_ON_VBUS |
+				  CI13XXX_DISABLE_STREAMING,
+
+	.notify_event		= ci13xxx_msm_notify_event,
+};
+
+static int ci13xxx_msm_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *regs;
+	int irq;
+	int ret;
+
+	dev_dbg(&pdev->dev, "ci13xxx_msm_probe\n");
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get platform resource mem\n");
+		return -ENXIO;
+	}
+
+	regs = ioremap(res->start, resource_size(res));
+	if (!regs) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		return -ENOMEM;
+	}
+
+	ret = udc_probe(&ci13xxx_msm_udc_driver, &pdev->dev, regs);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "udc_probe failed\n");
+		goto iounmap;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "IRQ not found\n");
+		ret = -ENXIO;
+		goto udc_remove;
+	}
+
+	ret = request_irq(irq, msm_udc_irq, IRQF_SHARED, pdev->name, pdev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "request_irq failed\n");
+		goto udc_remove;
+	}
+
+	pm_runtime_no_callbacks(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+
+udc_remove:
+	udc_remove();
+iounmap:
+	iounmap(regs);
+
+	return ret;
+}
+
+static struct platform_driver ci13xxx_msm_driver = {
+	.probe = ci13xxx_msm_probe,
+	.driver = { .name = "msm_hsusb", },
+};
+
+static int __init ci13xxx_msm_init(void)
+{
+	return platform_driver_register(&ci13xxx_msm_driver);
+}
+module_init(ci13xxx_msm_init);
diff --git a/drivers/usb/gadget/ci13xxx_pci.c b/drivers/usb/gadget/ci13xxx_pci.c
new file mode 100644
index 00000000000..883ab5e832d
--- /dev/null
+++ b/drivers/usb/gadget/ci13xxx_pci.c
@@ -0,0 +1,176 @@
+/*
+ * ci13xxx_pci.c - MIPS USB IP core family device controller
+ *
+ * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ *
+ * Author: David Lopo
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "ci13xxx_udc.c"
+
+/* driver name */
+#define UDC_DRIVER_NAME   "ci13xxx_pci"
+
+/******************************************************************************
+ * PCI block
+ *****************************************************************************/
+/**
+ * ci13xxx_pci_irq: interrut handler
+ * @irq:  irq number
+ * @pdev: USB Device Controller interrupt source
+ *
+ * This function returns IRQ_HANDLED if the IRQ has been handled
+ * This is an ISR don't trace, use attribute interface instead
+ */
+static irqreturn_t ci13xxx_pci_irq(int irq, void *pdev)
+{
+	if (irq == 0) {
+		dev_err(&((struct pci_dev *)pdev)->dev, "Invalid IRQ0 usage!");
+		return IRQ_HANDLED;
+	}
+	return udc_irq();
+}
+
+static struct ci13xxx_udc_driver ci13xxx_pci_udc_driver = {
+	.name		= UDC_DRIVER_NAME,
+};
+
+/**
+ * ci13xxx_pci_probe: PCI probe
+ * @pdev: USB device controller being probed
+ * @id:   PCI hotplug ID connecting controller to UDC framework
+ *
+ * This function returns an error code
+ * Allocates basic PCI resources for this USB device controller, and then
+ * invokes the udc_probe() method to start the UDC associated with it
+ */
+static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
+				       const struct pci_device_id *id)
+{
+	void __iomem *regs = NULL;
+	int retval = 0;
+
+	if (id == NULL)
+		return -EINVAL;
+
+	retval = pci_enable_device(pdev);
+	if (retval)
+		goto done;
+
+	if (!pdev->irq) {
+		dev_err(&pdev->dev, "No IRQ, check BIOS/PCI setup!");
+		retval = -ENODEV;
+		goto disable_device;
+	}
+
+	retval = pci_request_regions(pdev, UDC_DRIVER_NAME);
+	if (retval)
+		goto disable_device;
+
+	/* BAR 0 holds all the registers */
+	regs = pci_iomap(pdev, 0, 0);
+	if (!regs) {
+		dev_err(&pdev->dev, "Error mapping memory!");
+		retval = -EFAULT;
+		goto release_regions;
+	}
+	pci_set_drvdata(pdev, (__force void *)regs);
+
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
+	retval = udc_probe(&ci13xxx_pci_udc_driver, &pdev->dev, regs);
+	if (retval)
+		goto iounmap;
+
+	/* our device does not have MSI capability */
+
+	retval = request_irq(pdev->irq, ci13xxx_pci_irq, IRQF_SHARED,
+			     UDC_DRIVER_NAME, pdev);
+	if (retval)
+		goto gadget_remove;
+
+	return 0;
+
+ gadget_remove:
+	udc_remove();
+ iounmap:
+	pci_iounmap(pdev, regs);
+ release_regions:
+	pci_release_regions(pdev);
+ disable_device:
+	pci_disable_device(pdev);
+ done:
+	return retval;
+}
+
+/**
+ * ci13xxx_pci_remove: PCI remove
+ * @pdev: USB Device Controller being removed
+ *
+ * Reverses the effect of ci13xxx_pci_probe(),
+ * first invoking the udc_remove() and then releases
+ * all PCI resources allocated for this USB device controller
+ */
+static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
+{
+	free_irq(pdev->irq, pdev);
+	udc_remove();
+	pci_iounmap(pdev, (__force void __iomem *)pci_get_drvdata(pdev));
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+/**
+ * PCI device table
+ * PCI device structure
+ *
+ * Check "pci.h" for details
+ */
+static DEFINE_PCI_DEVICE_TABLE(ci13xxx_pci_id_table) = {
+	{ PCI_DEVICE(0x153F, 0x1004) },
+	{ PCI_DEVICE(0x153F, 0x1006) },
+	{ 0, 0, 0, 0, 0, 0, 0 /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, ci13xxx_pci_id_table);
+
+static struct pci_driver ci13xxx_pci_driver = {
+	.name         =	UDC_DRIVER_NAME,
+	.id_table     =	ci13xxx_pci_id_table,
+	.probe        =	ci13xxx_pci_probe,
+	.remove       =	__devexit_p(ci13xxx_pci_remove),
+};
+
+/**
+ * ci13xxx_pci_init: module init
+ *
+ * Driver load
+ */
+static int __init ci13xxx_pci_init(void)
+{
+	return pci_register_driver(&ci13xxx_pci_driver);
+}
+module_init(ci13xxx_pci_init);
+
+/**
+ * ci13xxx_pci_exit: module exit
+ *
+ * Driver unload
+ */
+static void __exit ci13xxx_pci_exit(void)
+{
+	pci_unregister_driver(&ci13xxx_pci_driver);
+}
+module_exit(ci13xxx_pci_exit);
+
+MODULE_AUTHOR("MIPS - David Lopo <dlopo@chipidea.mips.com>");
+MODULE_DESCRIPTION("MIPS CI13XXX USB Peripheral Controller");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("June 2008");
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 98b36fc88c7..31656a2b4ab 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -22,7 +22,6 @@
  * - ENDPT:  endpoint operations (Gadget API)
  * - GADGET: gadget operations (Gadget API)
  * - BUS:    bus glue code, bus abstraction layer
- * - PCI:    PCI core interface and PCI resources (interrupts, memory...)
  *
  * Compile Options
  * - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities
@@ -60,11 +59,11 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/pm_runtime.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
 
 #include "ci13xxx_udc.h"
 
@@ -75,9 +74,6 @@
 /* ctrl register bank access */
 static DEFINE_SPINLOCK(udc_lock);
 
-/* driver name */
-#define UDC_DRIVER_NAME   "ci13xxx_udc"
-
 /* control endpoint description */
 static const struct usb_endpoint_descriptor
 ctrl_endpt_desc = {
@@ -132,6 +128,9 @@ static struct {
 	size_t        size;   /* bank size */
 } hw_bank;
 
+/* MSM specific */
+#define ABS_AHBBURST        (0x0090UL)
+#define ABS_AHBMODE         (0x0098UL)
 /* UDC register map */
 #define ABS_CAPLENGTH       (0x100UL)
 #define ABS_HCCPARAMS       (0x108UL)
@@ -248,13 +247,7 @@ static u32 hw_ctest_and_write(u32 addr, u32 mask, u32 data)
 	return (reg & mask) >> ffs_nr(mask);
 }
 
-/**
- * hw_device_reset: resets chip (execute without interruption)
- * @base: register base address
- *
- * This function returns an error code
- */
-static int hw_device_reset(void __iomem *base)
+static int hw_device_init(void __iomem *base)
 {
 	u32 reg;
 
@@ -271,6 +264,28 @@ static int hw_device_reset(void __iomem *base)
 	hw_bank.size += CAP_LAST;
 	hw_bank.size /= sizeof(u32);
 
+	reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN);
+	if (reg == 0 || reg > ENDPT_MAX)
+		return -ENODEV;
+
+	hw_ep_max = reg;   /* cache hw ENDPT_MAX */
+
+	/* setup lock mode ? */
+
+	/* ENDPTSETUPSTAT is '0' by default */
+
+	/* HCSPARAMS.bf.ppc SHOULD BE zero for device */
+
+	return 0;
+}
+/**
+ * hw_device_reset: resets chip (execute without interruption)
+ * @base: register base address
+ *
+ * This function returns an error code
+ */
+static int hw_device_reset(struct ci13xxx *udc)
+{
 	/* should flush & stop before reset */
 	hw_cwrite(CAP_ENDPTFLUSH, ~0, ~0);
 	hw_cwrite(CAP_USBCMD, USBCMD_RS, 0);
@@ -279,6 +294,14 @@ static int hw_device_reset(void __iomem *base)
 	while (hw_cread(CAP_USBCMD, USBCMD_RST))
 		udelay(10);             /* not RTOS friendly */
 
+
+	if (udc->udc_driver->notify_event)
+		udc->udc_driver->notify_event(udc,
+			CI13XXX_CONTROLLER_RESET_EVENT);
+
+	if (udc->udc_driver->flags && CI13XXX_DISABLE_STREAMING)
+		hw_cwrite(CAP_USBMODE, USBMODE_SDIS, USBMODE_SDIS);
+
 	/* USBMODE should be configured step by step */
 	hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
 	hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_DEVICE);
@@ -290,18 +313,6 @@ static int hw_device_reset(void __iomem *base)
 		return -ENODEV;
 	}
 
-	reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN);
-	if (reg == 0 || reg > ENDPT_MAX)
-		return -ENODEV;
-
-	hw_ep_max = reg;   /* cache hw ENDPT_MAX */
-
-	/* setup lock mode ? */
-
-	/* ENDPTSETUPSTAT is '0' by default */
-
-	/* HCSPARAMS.bf.ppc SHOULD BE zero for device */
-
 	return 0;
 }
 
@@ -1449,7 +1460,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 	mReq->ptr->page[0]  = mReq->req.dma;
 	for (i = 1; i < 5; i++)
 		mReq->ptr->page[i] =
-			(mReq->req.dma + i * PAGE_SIZE) & ~TD_RESERVED_MASK;
+			(mReq->req.dma + i * CI13XXX_PAGE_SIZE) & ~TD_RESERVED_MASK;
 
 	/*
 	 *  QH configuration
@@ -1540,7 +1551,7 @@ __acquires(mEp->lock)
 		list_del_init(&mReq->queue);
 		mReq->req.status = -ESHUTDOWN;
 
-		if (!mReq->req.no_interrupt && mReq->req.complete != NULL) {
+		if (mReq->req.complete != NULL) {
 			spin_unlock(mEp->lock);
 			mReq->req.complete(&mEp->ep, &mReq->req);
 			spin_lock(mEp->lock);
@@ -1557,8 +1568,6 @@ __acquires(mEp->lock)
  * Caller must hold lock
  */
 static int _gadget_stop_activity(struct usb_gadget *gadget)
-__releases(udc->lock)
-__acquires(udc->lock)
 {
 	struct usb_ep *ep;
 	struct ci13xxx    *udc = container_of(gadget, struct ci13xxx, gadget);
@@ -1570,8 +1579,6 @@ __acquires(udc->lock)
 	if (gadget == NULL)
 		return -EINVAL;
 
-	spin_unlock(udc->lock);
-
 	/* flush all endpoints */
 	gadget_for_each_ep(ep, gadget) {
 		usb_ep_fifo_flush(ep);
@@ -1591,8 +1598,6 @@ __acquires(udc->lock)
 		mEp->status = NULL;
 	}
 
-	spin_lock(udc->lock);
-
 	return 0;
 }
 
@@ -1621,6 +1626,7 @@ __acquires(udc->lock)
 
 	dbg_event(0xFF, "BUS RST", 0);
 
+	spin_unlock(udc->lock);
 	retval = _gadget_stop_activity(&udc->gadget);
 	if (retval)
 		goto done;
@@ -1629,10 +1635,9 @@ __acquires(udc->lock)
 	if (retval)
 		goto done;
 
-	spin_unlock(udc->lock);
 	retval = usb_ep_enable(&mEp->ep, &ctrl_endpt_desc);
 	if (!retval) {
-		mEp->status = usb_ep_alloc_request(&mEp->ep, GFP_KERNEL);
+		mEp->status = usb_ep_alloc_request(&mEp->ep, GFP_ATOMIC);
 		if (mEp->status == NULL) {
 			usb_ep_disable(&mEp->ep);
 			retval = -ENOMEM;
@@ -1789,18 +1794,20 @@ __acquires(mEp->lock)
 
 	dbg_done(_usb_addr(mEp), mReq->ptr->token, retval);
 
-	if (!mReq->req.no_interrupt && mReq->req.complete != NULL) {
+	if (!list_empty(&mEp->qh[mEp->dir].queue)) {
+		struct ci13xxx_req* mReqEnq;
+
+		mReqEnq = list_entry(mEp->qh[mEp->dir].queue.next,
+				  struct ci13xxx_req, queue);
+		_hardware_enqueue(mEp, mReqEnq);
+	}
+
+	if (mReq->req.complete != NULL) {
 		spin_unlock(mEp->lock);
 		mReq->req.complete(&mEp->ep, &mReq->req);
 		spin_lock(mEp->lock);
 	}
 
-	if (!list_empty(&mEp->qh[mEp->dir].queue)) {
-		mReq = list_entry(mEp->qh[mEp->dir].queue.next,
-				  struct ci13xxx_req, queue);
-		_hardware_enqueue(mEp, mReq);
-	}
-
  done:
 	return retval;
 }
@@ -2061,7 +2068,6 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 {
 	struct ci13xxx_ep  *mEp  = container_of(ep, struct ci13xxx_ep, ep);
 	struct ci13xxx_req *mReq = NULL;
-	unsigned long flags;
 
 	trace("%p, %i", ep, gfp_flags);
 
@@ -2070,8 +2076,6 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 		return NULL;
 	}
 
-	spin_lock_irqsave(mEp->lock, flags);
-
 	mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags);
 	if (mReq != NULL) {
 		INIT_LIST_HEAD(&mReq->queue);
@@ -2086,8 +2090,6 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 
 	dbg_event(_usb_addr(mEp), "ALLOC", mReq == NULL);
 
-	spin_unlock_irqrestore(mEp->lock, flags);
-
 	return (mReq == NULL) ? NULL : &mReq->req;
 }
 
@@ -2157,8 +2159,8 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 		goto done;
 	}
 
-	if (req->length > (4 * PAGE_SIZE)) {
-		req->length = (4 * PAGE_SIZE);
+	if (req->length > (4 * CI13XXX_PAGE_SIZE)) {
+		req->length = (4 * CI13XXX_PAGE_SIZE);
 		retval = -EMSGSIZE;
 		warn("request length truncated");
 	}
@@ -2170,8 +2172,10 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 	mReq->req.actual = 0;
 	list_add_tail(&mReq->queue, &mEp->qh[mEp->dir].queue);
 
-	retval = _hardware_enqueue(mEp, mReq);
-	if (retval == -EALREADY || retval == -EBUSY) {
+	if (list_is_singular(&mEp->qh[mEp->dir].queue))
+		retval = _hardware_enqueue(mEp, mReq);
+
+	if (retval == -EALREADY) {
 		dbg_event(_usb_addr(mEp), "QUEUE", retval);
 		retval = 0;
 	}
@@ -2209,7 +2213,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 	list_del_init(&mReq->queue);
 	req->status = -ECONNRESET;
 
-	if (!mReq->req.no_interrupt && mReq->req.complete != NULL) {
+	if (mReq->req.complete != NULL) {
 		spin_unlock(mEp->lock);
 		mReq->req.complete(&mEp->ep, &mReq->req);
 		spin_lock(mEp->lock);
@@ -2332,12 +2336,47 @@ static const struct usb_ep_ops usb_ep_ops = {
 /******************************************************************************
  * GADGET block
  *****************************************************************************/
+static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
+{
+	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
+	unsigned long flags;
+	int gadget_ready = 0;
+
+	if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS))
+		return -EOPNOTSUPP;
+
+	spin_lock_irqsave(udc->lock, flags);
+	udc->vbus_active = is_active;
+	if (udc->driver)
+		gadget_ready = 1;
+	spin_unlock_irqrestore(udc->lock, flags);
+
+	if (gadget_ready) {
+		if (is_active) {
+			pm_runtime_get_sync(&_gadget->dev);
+			hw_device_reset(udc);
+			hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma);
+		} else {
+			hw_device_state(0);
+			if (udc->udc_driver->notify_event)
+				udc->udc_driver->notify_event(udc,
+				CI13XXX_CONTROLLER_STOPPED_EVENT);
+			_gadget_stop_activity(&udc->gadget);
+			pm_runtime_put_sync(&_gadget->dev);
+		}
+	}
+
+	return 0;
+}
+
 /**
  * Device operations part of the API to the USB controller hardware,
  * which don't involve endpoints (or i/o)
  * Check  "usb_gadget.h" for details
  */
-static const struct usb_gadget_ops usb_gadget_ops;
+static const struct usb_gadget_ops usb_gadget_ops = {
+	.vbus_session	= ci13xxx_vbus_session,
+};
 
 /**
  * usb_gadget_probe_driver: register a gadget driver
@@ -2358,7 +2397,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 
 	if (driver             == NULL ||
 	    bind               == NULL ||
-	    driver->unbind     == NULL ||
 	    driver->setup      == NULL ||
 	    driver->disconnect == NULL ||
 	    driver->suspend    == NULL ||
@@ -2372,13 +2410,13 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	/* alloc resources */
 	udc->qh_pool = dma_pool_create("ci13xxx_qh", &udc->gadget.dev,
 				       sizeof(struct ci13xxx_qh),
-				       64, PAGE_SIZE);
+				       64, CI13XXX_PAGE_SIZE);
 	if (udc->qh_pool == NULL)
 		return -ENOMEM;
 
 	udc->td_pool = dma_pool_create("ci13xxx_td", &udc->gadget.dev,
 				       sizeof(struct ci13xxx_td),
-				       64, PAGE_SIZE);
+				       64, CI13XXX_PAGE_SIZE);
 	if (udc->td_pool == NULL) {
 		dma_pool_destroy(udc->qh_pool);
 		udc->qh_pool = NULL;
@@ -2390,7 +2428,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	info("hw_ep_max = %d", hw_ep_max);
 
 	udc->driver = driver;
-	udc->gadget.ops        = NULL;
 	udc->gadget.dev.driver = NULL;
 
 	retval = 0;
@@ -2410,9 +2447,11 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 		/* this allocation cannot be random */
 		for (k = RX; k <= TX; k++) {
 			INIT_LIST_HEAD(&mEp->qh[k].queue);
+			spin_unlock_irqrestore(udc->lock, flags);
 			mEp->qh[k].ptr = dma_pool_alloc(udc->qh_pool,
 							GFP_KERNEL,
 							&mEp->qh[k].dma);
+			spin_lock_irqsave(udc->lock, flags);
 			if (mEp->qh[k].ptr == NULL)
 				retval = -ENOMEM;
 			else
@@ -2429,7 +2468,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 
 	/* bind gadget */
 	driver->driver.bus     = NULL;
-	udc->gadget.ops        = &usb_gadget_ops;
 	udc->gadget.dev.driver = &driver->driver;
 
 	spin_unlock_irqrestore(udc->lock, flags);
@@ -2437,12 +2475,24 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	spin_lock_irqsave(udc->lock, flags);
 
 	if (retval) {
-		udc->gadget.ops        = NULL;
 		udc->gadget.dev.driver = NULL;
 		goto done;
 	}
 
+	pm_runtime_get_sync(&udc->gadget.dev);
+	if (udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) {
+		if (udc->vbus_active) {
+			if (udc->udc_driver->flags & CI13XXX_REGS_SHARED)
+				hw_device_reset(udc);
+		} else {
+			pm_runtime_put_sync(&udc->gadget.dev);
+			goto done;
+		}
+	}
+
 	retval = hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma);
+	if (retval)
+		pm_runtime_put_sync(&udc->gadget.dev);
 
  done:
 	spin_unlock_irqrestore(udc->lock, flags);
@@ -2475,19 +2525,22 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	spin_lock_irqsave(udc->lock, flags);
 
-	hw_device_state(0);
-
-	/* unbind gadget */
-	if (udc->gadget.ops != NULL) {
+	if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) ||
+			udc->vbus_active) {
+		hw_device_state(0);
+		if (udc->udc_driver->notify_event)
+			udc->udc_driver->notify_event(udc,
+			CI13XXX_CONTROLLER_STOPPED_EVENT);
 		_gadget_stop_activity(&udc->gadget);
+		pm_runtime_put(&udc->gadget.dev);
+	}
 
-		spin_unlock_irqrestore(udc->lock, flags);
-		driver->unbind(&udc->gadget);               /* MAY SLEEP */
-		spin_lock_irqsave(udc->lock, flags);
+	/* unbind gadget */
+	spin_unlock_irqrestore(udc->lock, flags);
+	driver->unbind(&udc->gadget);               /* MAY SLEEP */
+	spin_lock_irqsave(udc->lock, flags);
 
-		udc->gadget.ops        = NULL;
-		udc->gadget.dev.driver = NULL;
-	}
+	udc->gadget.dev.driver = NULL;
 
 	/* free resources */
 	for (i = 0; i < hw_ep_max; i++) {
@@ -2544,6 +2597,14 @@ static irqreturn_t udc_irq(void)
 	}
 
 	spin_lock(udc->lock);
+
+	if (udc->udc_driver->flags & CI13XXX_REGS_SHARED) {
+		if (hw_cread(CAP_USBMODE, USBMODE_CM) !=
+				USBMODE_CM_DEVICE) {
+			spin_unlock(udc->lock);
+			return IRQ_NONE;
+		}
+	}
 	intr = hw_test_and_clear_intr_active();
 	if (intr) {
 		isr_statistics.hndl.buf[isr_statistics.hndl.idx++] = intr;
@@ -2602,14 +2663,16 @@ static void udc_release(struct device *dev)
  * No interrupts active, the IRQ has not been requested yet
  * Kernel assumes 32-bit DMA operations by default, no need to dma_set_mask
  */
-static int udc_probe(struct device *dev, void __iomem *regs, const char *name)
+static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev,
+		void __iomem *regs)
 {
 	struct ci13xxx *udc;
 	int retval = 0;
 
 	trace("%p, %p, %p", dev, regs, name);
 
-	if (dev == NULL || regs == NULL || name == NULL)
+	if (dev == NULL || regs == NULL || driver == NULL ||
+			driver->name == NULL)
 		return -EINVAL;
 
 	udc = kzalloc(sizeof(struct ci13xxx), GFP_KERNEL);
@@ -2617,42 +2680,77 @@ static int udc_probe(struct device *dev, void __iomem *regs, const char *name)
 		return -ENOMEM;
 
 	udc->lock = &udc_lock;
+	udc->regs = regs;
+	udc->udc_driver = driver;
 
-	retval = hw_device_reset(regs);
-	if (retval)
-		goto done;
-
-	udc->gadget.ops          = NULL;
+	udc->gadget.ops          = &usb_gadget_ops;
 	udc->gadget.speed        = USB_SPEED_UNKNOWN;
 	udc->gadget.is_dualspeed = 1;
 	udc->gadget.is_otg       = 0;
-	udc->gadget.name         = name;
+	udc->gadget.name         = driver->name;
 
 	INIT_LIST_HEAD(&udc->gadget.ep_list);
 	udc->gadget.ep0 = NULL;
 
 	dev_set_name(&udc->gadget.dev, "gadget");
 	udc->gadget.dev.dma_mask = dev->dma_mask;
+	udc->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask;
 	udc->gadget.dev.parent   = dev;
 	udc->gadget.dev.release  = udc_release;
 
+	retval = hw_device_init(regs);
+	if (retval < 0)
+		goto free_udc;
+
+	udc->transceiver = otg_get_transceiver();
+
+	if (udc->udc_driver->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
+		if (udc->transceiver == NULL) {
+			retval = -ENODEV;
+			goto free_udc;
+		}
+	}
+
+	if (!(udc->udc_driver->flags & CI13XXX_REGS_SHARED)) {
+		retval = hw_device_reset(udc);
+		if (retval)
+			goto put_transceiver;
+	}
+
 	retval = device_register(&udc->gadget.dev);
-	if (retval)
-		goto done;
+	if (retval) {
+		put_device(&udc->gadget.dev);
+		goto put_transceiver;
+	}
 
 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
 	retval = dbg_create_files(&udc->gadget.dev);
 #endif
-	if (retval) {
-		device_unregister(&udc->gadget.dev);
-		goto done;
+	if (retval)
+		goto unreg_device;
+
+	if (udc->transceiver) {
+		retval = otg_set_peripheral(udc->transceiver, &udc->gadget);
+		if (retval)
+			goto remove_dbg;
 	}
+	pm_runtime_no_callbacks(&udc->gadget.dev);
+	pm_runtime_enable(&udc->gadget.dev);
 
 	_udc = udc;
 	return retval;
 
- done:
 	err("error = %i", retval);
+remove_dbg:
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+	dbg_remove_files(&udc->gadget.dev);
+#endif
+unreg_device:
+	device_unregister(&udc->gadget.dev);
+put_transceiver:
+	if (udc->transceiver)
+		otg_put_transceiver(udc->transceiver);
+free_udc:
 	kfree(udc);
 	_udc = NULL;
 	return retval;
@@ -2672,6 +2770,10 @@ static void udc_remove(void)
 		return;
 	}
 
+	if (udc->transceiver) {
+		otg_set_peripheral(udc->transceiver, &udc->gadget);
+		otg_put_transceiver(udc->transceiver);
+	}
 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
 	dbg_remove_files(&udc->gadget.dev);
 #endif
@@ -2680,156 +2782,3 @@ static void udc_remove(void)
 	kfree(udc);
 	_udc = NULL;
 }
-
-/******************************************************************************
- * PCI block
- *****************************************************************************/
-/**
- * ci13xxx_pci_irq: interrut handler
- * @irq:  irq number
- * @pdev: USB Device Controller interrupt source
- *
- * This function returns IRQ_HANDLED if the IRQ has been handled
- * This is an ISR don't trace, use attribute interface instead
- */
-static irqreturn_t ci13xxx_pci_irq(int irq, void *pdev)
-{
-	if (irq == 0) {
-		dev_err(&((struct pci_dev *)pdev)->dev, "Invalid IRQ0 usage!");
-		return IRQ_HANDLED;
-	}
-	return udc_irq();
-}
-
-/**
- * ci13xxx_pci_probe: PCI probe
- * @pdev: USB device controller being probed
- * @id:   PCI hotplug ID connecting controller to UDC framework
- *
- * This function returns an error code
- * Allocates basic PCI resources for this USB device controller, and then
- * invokes the udc_probe() method to start the UDC associated with it
- */
-static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
-				       const struct pci_device_id *id)
-{
-	void __iomem *regs = NULL;
-	int retval = 0;
-
-	if (id == NULL)
-		return -EINVAL;
-
-	retval = pci_enable_device(pdev);
-	if (retval)
-		goto done;
-
-	if (!pdev->irq) {
-		dev_err(&pdev->dev, "No IRQ, check BIOS/PCI setup!");
-		retval = -ENODEV;
-		goto disable_device;
-	}
-
-	retval = pci_request_regions(pdev, UDC_DRIVER_NAME);
-	if (retval)
-		goto disable_device;
-
-	/* BAR 0 holds all the registers */
-	regs = pci_iomap(pdev, 0, 0);
-	if (!regs) {
-		dev_err(&pdev->dev, "Error mapping memory!");
-		retval = -EFAULT;
-		goto release_regions;
-	}
-	pci_set_drvdata(pdev, (__force void *)regs);
-
-	pci_set_master(pdev);
-	pci_try_set_mwi(pdev);
-
-	retval = udc_probe(&pdev->dev, regs, UDC_DRIVER_NAME);
-	if (retval)
-		goto iounmap;
-
-	/* our device does not have MSI capability */
-
-	retval = request_irq(pdev->irq, ci13xxx_pci_irq, IRQF_SHARED,
-			     UDC_DRIVER_NAME, pdev);
-	if (retval)
-		goto gadget_remove;
-
-	return 0;
-
- gadget_remove:
-	udc_remove();
- iounmap:
-	pci_iounmap(pdev, regs);
- release_regions:
-	pci_release_regions(pdev);
- disable_device:
-	pci_disable_device(pdev);
- done:
-	return retval;
-}
-
-/**
- * ci13xxx_pci_remove: PCI remove
- * @pdev: USB Device Controller being removed
- *
- * Reverses the effect of ci13xxx_pci_probe(),
- * first invoking the udc_remove() and then releases
- * all PCI resources allocated for this USB device controller
- */
-static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
-{
-	free_irq(pdev->irq, pdev);
-	udc_remove();
-	pci_iounmap(pdev, (__force void __iomem *)pci_get_drvdata(pdev));
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-}
-
-/**
- * PCI device table
- * PCI device structure
- *
- * Check "pci.h" for details
- */
-static DEFINE_PCI_DEVICE_TABLE(ci13xxx_pci_id_table) = {
-	{ PCI_DEVICE(0x153F, 0x1004) },
-	{ PCI_DEVICE(0x153F, 0x1006) },
-	{ 0, 0, 0, 0, 0, 0, 0 /* end: all zeroes */ }
-};
-MODULE_DEVICE_TABLE(pci, ci13xxx_pci_id_table);
-
-static struct pci_driver ci13xxx_pci_driver = {
-	.name         =	UDC_DRIVER_NAME,
-	.id_table     =	ci13xxx_pci_id_table,
-	.probe        =	ci13xxx_pci_probe,
-	.remove       =	__devexit_p(ci13xxx_pci_remove),
-};
-
-/**
- * ci13xxx_pci_init: module init
- *
- * Driver load
- */
-static int __init ci13xxx_pci_init(void)
-{
-	return pci_register_driver(&ci13xxx_pci_driver);
-}
-module_init(ci13xxx_pci_init);
-
-/**
- * ci13xxx_pci_exit: module exit
- *
- * Driver unload
- */
-static void __exit ci13xxx_pci_exit(void)
-{
-	pci_unregister_driver(&ci13xxx_pci_driver);
-}
-module_exit(ci13xxx_pci_exit);
-
-MODULE_AUTHOR("MIPS - David Lopo <dlopo@chipidea.mips.com>");
-MODULE_DESCRIPTION("MIPS CI13XXX USB Peripheral Controller");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("June 2008");
diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h
index 4026e9cede3..f61fed07f76 100644
--- a/drivers/usb/gadget/ci13xxx_udc.h
+++ b/drivers/usb/gadget/ci13xxx_udc.h
@@ -19,6 +19,7 @@
 /******************************************************************************
  * DEFINE
  *****************************************************************************/
+#define CI13XXX_PAGE_SIZE  4096ul /* page size for TD's */
 #define ENDPT_MAX          (16)
 #define CTRL_PAYLOAD_MAX   (64)
 #define RX        (0)  /* similar to USB_DIR_OUT but can be used as an index */
@@ -97,9 +98,24 @@ struct ci13xxx_ep {
 	struct dma_pool                       *td_pool;
 };
 
+struct ci13xxx;
+struct ci13xxx_udc_driver {
+	const char	*name;
+	unsigned long	 flags;
+#define CI13XXX_REGS_SHARED		BIT(0)
+#define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
+#define CI13XXX_PULLUP_ON_VBUS		BIT(2)
+#define CI13XXX_DISABLE_STREAMING	BIT(3)
+
+#define CI13XXX_CONTROLLER_RESET_EVENT		0
+#define CI13XXX_CONTROLLER_STOPPED_EVENT	1
+	void	(*notify_event) (struct ci13xxx *udc, unsigned event);
+};
+
 /* CI13XXX UDC descriptor & global resources */
 struct ci13xxx {
 	spinlock_t		  *lock;      /* ctrl register bank access */
+	void __iomem              *regs;      /* registers address space */
 
 	struct dma_pool           *qh_pool;   /* DMA pool for queue heads */
 	struct dma_pool           *td_pool;   /* DMA pool for transfer descs */
@@ -108,6 +124,9 @@ struct ci13xxx {
 	struct ci13xxx_ep          ci13xxx_ep[ENDPT_MAX]; /* extended endpts */
 
 	struct usb_gadget_driver  *driver;     /* 3rd party gadget driver */
+	struct ci13xxx_udc_driver *udc_driver; /* device controller driver */
+	int                        vbus_active; /* is VBUS active */
+	struct otg_transceiver    *transceiver; /* Transceiver struct */
 };
 
 /******************************************************************************
@@ -157,6 +176,7 @@ struct ci13xxx {
 #define    USBMODE_CM_DEVICE  (0x02UL <<  0)
 #define    USBMODE_CM_HOST    (0x03UL <<  0)
 #define USBMODE_SLOM          BIT(3)
+#define USBMODE_SDIS          BIT(4)
 
 /* ENDPTCTRL */
 #define ENDPTCTRL_RXS         BIT(0)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 7b5cc16e4a0..f6ff8456d52 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1047,9 +1047,9 @@ composite_unbind(struct usb_gadget *gadget)
 		kfree(cdev->req->buf);
 		usb_ep_free_request(gadget->ep0, cdev->req);
 	}
+	device_remove_file(&gadget->dev, &dev_attr_suspended);
 	kfree(cdev);
 	set_gadget_data(gadget, NULL);
-	device_remove_file(&gadget->dev, &dev_attr_suspended);
 	composite = NULL;
 }
 
@@ -1107,14 +1107,6 @@ static int composite_bind(struct usb_gadget *gadget)
 	 */
 	usb_ep_autoconfig_reset(cdev->gadget);
 
-	/* standardized runtime overrides for device ID data */
-	if (idVendor)
-		cdev->desc.idVendor = cpu_to_le16(idVendor);
-	if (idProduct)
-		cdev->desc.idProduct = cpu_to_le16(idProduct);
-	if (bcdDevice)
-		cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
-
 	/* composite gadget needs to assign strings for whole device (like
 	 * serial number), register function drivers, potentially update
 	 * power state and consumption, etc
@@ -1126,7 +1118,15 @@ static int composite_bind(struct usb_gadget *gadget)
 	cdev->desc = *composite->dev;
 	cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
 
-	/* stirng overrides */
+	/* standardized runtime overrides for device ID data */
+	if (idVendor)
+		cdev->desc.idVendor = cpu_to_le16(idVendor);
+	if (idProduct)
+		cdev->desc.idProduct = cpu_to_le16(idProduct);
+	if (bcdDevice)
+		cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
+
+	/* string overrides */
 	if (iManufacturer || !cdev->desc.iManufacturer) {
 		if (!iManufacturer && !composite->iManufacturer &&
 		    !*composite_manufacturer)
@@ -1188,6 +1188,8 @@ composite_suspend(struct usb_gadget *gadget)
 		composite->suspend(cdev);
 
 	cdev->suspended = 1;
+
+	usb_gadget_vbus_draw(gadget, 2);
 }
 
 static void
@@ -1195,6 +1197,7 @@ composite_resume(struct usb_gadget *gadget)
 {
 	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
 	struct usb_function		*f;
+	u8				maxpower;
 
 	/* REVISIT:  should we have config level
 	 * suspend/resume callbacks?
@@ -1207,6 +1210,11 @@ composite_resume(struct usb_gadget *gadget)
 			if (f->resume)
 				f->resume(f);
 		}
+
+		maxpower = cdev->config->bMaxPower;
+
+		usb_gadget_vbus_draw(gadget, maxpower ?
+			(2 * maxpower) : CONFIG_USB_GADGET_VBUS_DRAW);
 	}
 
 	cdev->suspended = 0;
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 1d2a2abbfa8..13b9f47feec 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1197,6 +1197,139 @@ static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address)
 #define Ep_Request	(USB_TYPE_STANDARD | USB_RECIP_ENDPOINT)
 #define Ep_InRequest	(Ep_Request | USB_DIR_IN)
 
+
+/**
+ * handle_control_request() - handles all control transfers
+ * @dum: pointer to dummy (the_controller)
+ * @urb: the urb request to handle
+ * @setup: pointer to the setup data for a USB device control
+ *	 request
+ * @status: pointer to request handling status
+ *
+ * Return 0 - if the request was handled
+ *	  1 - if the request wasn't handles
+ *	  error code on error
+ */
+static int handle_control_request(struct dummy *dum, struct urb *urb,
+				  struct usb_ctrlrequest *setup,
+				  int *status)
+{
+	struct dummy_ep		*ep2;
+	int			ret_val = 1;
+	unsigned	w_index;
+	unsigned	w_value;
+
+	w_index = le16_to_cpu(setup->wIndex);
+	w_value = le16_to_cpu(setup->wValue);
+	switch (setup->bRequest) {
+	case USB_REQ_SET_ADDRESS:
+		if (setup->bRequestType != Dev_Request)
+			break;
+		dum->address = w_value;
+		*status = 0;
+		dev_dbg(udc_dev(dum), "set_address = %d\n",
+				w_value);
+		ret_val = 0;
+		break;
+	case USB_REQ_SET_FEATURE:
+		if (setup->bRequestType == Dev_Request) {
+			ret_val = 0;
+			switch (w_value) {
+			case USB_DEVICE_REMOTE_WAKEUP:
+				break;
+			case USB_DEVICE_B_HNP_ENABLE:
+				dum->gadget.b_hnp_enable = 1;
+				break;
+			case USB_DEVICE_A_HNP_SUPPORT:
+				dum->gadget.a_hnp_support = 1;
+				break;
+			case USB_DEVICE_A_ALT_HNP_SUPPORT:
+				dum->gadget.a_alt_hnp_support = 1;
+				break;
+			default:
+				ret_val = -EOPNOTSUPP;
+			}
+			if (ret_val == 0) {
+				dum->devstatus |= (1 << w_value);
+				*status = 0;
+			}
+		} else if (setup->bRequestType == Ep_Request) {
+			/* endpoint halt */
+			ep2 = find_endpoint(dum, w_index);
+			if (!ep2 || ep2->ep.name == ep0name) {
+				ret_val = -EOPNOTSUPP;
+				break;
+			}
+			ep2->halted = 1;
+			ret_val = 0;
+			*status = 0;
+		}
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+		if (setup->bRequestType == Dev_Request) {
+			ret_val = 0;
+			switch (w_value) {
+			case USB_DEVICE_REMOTE_WAKEUP:
+				w_value = USB_DEVICE_REMOTE_WAKEUP;
+				break;
+			default:
+				ret_val = -EOPNOTSUPP;
+				break;
+			}
+			if (ret_val == 0) {
+				dum->devstatus &= ~(1 << w_value);
+				*status = 0;
+			}
+		} else if (setup->bRequestType == Ep_Request) {
+			/* endpoint halt */
+			ep2 = find_endpoint(dum, w_index);
+			if (!ep2) {
+				ret_val = -EOPNOTSUPP;
+				break;
+			}
+			if (!ep2->wedged)
+				ep2->halted = 0;
+			ret_val = 0;
+			*status = 0;
+		}
+		break;
+	case USB_REQ_GET_STATUS:
+		if (setup->bRequestType == Dev_InRequest
+				|| setup->bRequestType == Intf_InRequest
+				|| setup->bRequestType == Ep_InRequest) {
+			char *buf;
+			/*
+			 * device: remote wakeup, selfpowered
+			 * interface: nothing
+			 * endpoint: halt
+			 */
+			buf = (char *)urb->transfer_buffer;
+			if (urb->transfer_buffer_length > 0) {
+				if (setup->bRequestType == Ep_InRequest) {
+					ep2 = find_endpoint(dum, w_index);
+					if (!ep2) {
+						ret_val = -EOPNOTSUPP;
+						break;
+					}
+					buf[0] = ep2->halted;
+				} else if (setup->bRequestType ==
+					   Dev_InRequest) {
+					buf[0] = (u8)dum->devstatus;
+				} else
+					buf[0] = 0;
+			}
+			if (urb->transfer_buffer_length > 1)
+				buf[1] = 0;
+			urb->actual_length = min_t(u32, 2,
+				urb->transfer_buffer_length);
+			ret_val = 0;
+			*status = 0;
+		}
+		break;
+	}
+	return ret_val;
+}
+
 /* drive both sides of the transfers; looks like irq handlers to
  * both drivers except the callbacks aren't in_irq().
  */
@@ -1299,14 +1432,8 @@ restart:
 		if (ep == &dum->ep [0] && ep->setup_stage) {
 			struct usb_ctrlrequest		setup;
 			int				value = 1;
-			struct dummy_ep			*ep2;
-			unsigned			w_index;
-			unsigned			w_value;
 
 			setup = *(struct usb_ctrlrequest*) urb->setup_packet;
-			w_index = le16_to_cpu(setup.wIndex);
-			w_value = le16_to_cpu(setup.wValue);
-
 			/* paranoia, in case of stale queued data */
 			list_for_each_entry (req, &ep->queue, queue) {
 				list_del_init (&req->queue);
@@ -1328,117 +1455,9 @@ restart:
 			ep->last_io = jiffies;
 			ep->setup_stage = 0;
 			ep->halted = 0;
-			switch (setup.bRequest) {
-			case USB_REQ_SET_ADDRESS:
-				if (setup.bRequestType != Dev_Request)
-					break;
-				dum->address = w_value;
-				status = 0;
-				dev_dbg (udc_dev(dum), "set_address = %d\n",
-						w_value);
-				value = 0;
-				break;
-			case USB_REQ_SET_FEATURE:
-				if (setup.bRequestType == Dev_Request) {
-					value = 0;
-					switch (w_value) {
-					case USB_DEVICE_REMOTE_WAKEUP:
-						break;
-					case USB_DEVICE_B_HNP_ENABLE:
-						dum->gadget.b_hnp_enable = 1;
-						break;
-					case USB_DEVICE_A_HNP_SUPPORT:
-						dum->gadget.a_hnp_support = 1;
-						break;
-					case USB_DEVICE_A_ALT_HNP_SUPPORT:
-						dum->gadget.a_alt_hnp_support
-							= 1;
-						break;
-					default:
-						value = -EOPNOTSUPP;
-					}
-					if (value == 0) {
-						dum->devstatus |=
-							(1 << w_value);
-						status = 0;
-					}
 
-				} else if (setup.bRequestType == Ep_Request) {
-					// endpoint halt
-					ep2 = find_endpoint (dum, w_index);
-					if (!ep2 || ep2->ep.name == ep0name) {
-						value = -EOPNOTSUPP;
-						break;
-					}
-					ep2->halted = 1;
-					value = 0;
-					status = 0;
-				}
-				break;
-			case USB_REQ_CLEAR_FEATURE:
-				if (setup.bRequestType == Dev_Request) {
-					switch (w_value) {
-					case USB_DEVICE_REMOTE_WAKEUP:
-						dum->devstatus &= ~(1 <<
-							USB_DEVICE_REMOTE_WAKEUP);
-						value = 0;
-						status = 0;
-						break;
-					default:
-						value = -EOPNOTSUPP;
-						break;
-					}
-				} else if (setup.bRequestType == Ep_Request) {
-					// endpoint halt
-					ep2 = find_endpoint (dum, w_index);
-					if (!ep2) {
-						value = -EOPNOTSUPP;
-						break;
-					}
-					if (!ep2->wedged)
-						ep2->halted = 0;
-					value = 0;
-					status = 0;
-				}
-				break;
-			case USB_REQ_GET_STATUS:
-				if (setup.bRequestType == Dev_InRequest
-						|| setup.bRequestType
-							== Intf_InRequest
-						|| setup.bRequestType
-							== Ep_InRequest
-						) {
-					char *buf;
-
-					// device: remote wakeup, selfpowered
-					// interface: nothing
-					// endpoint: halt
-					buf = (char *)urb->transfer_buffer;
-					if (urb->transfer_buffer_length > 0) {
-						if (setup.bRequestType ==
-								Ep_InRequest) {
-	ep2 = find_endpoint (dum, w_index);
-	if (!ep2) {
-		value = -EOPNOTSUPP;
-		break;
-	}
-	buf [0] = ep2->halted;
-						} else if (setup.bRequestType ==
-								Dev_InRequest) {
-							buf [0] = (u8)
-								dum->devstatus;
-						} else
-							buf [0] = 0;
-					}
-					if (urb->transfer_buffer_length > 1)
-						buf [1] = 0;
-					urb->actual_length = min_t(u32, 2,
-						urb->transfer_buffer_length);
-					value = 0;
-					status = 0;
-				}
-				break;
-			}
+			value = handle_control_request(dum, urb, &setup,
+						       &status);
 
 			/* gadget driver handles all other requests.  block
 			 * until setup() returns; no reentrancy issues etc.
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 484c5ba5450..1499f9e4afa 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -1,10 +1,10 @@
 /*
- * f_fs.c -- user mode filesystem api for usb composite funtcion controllers
+ * f_fs.c -- user mode file system API for USB composite function controllers
  *
  * Copyright (C) 2010 Samsung Electronics
  * Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
  *
- * Based on inode.c (GadgetFS):
+ * Based on inode.c (GadgetFS) which was:
  * Copyright (C) 2003-2004 David Brownell
  * Copyright (C) 2003 Agilent Technologies
  *
@@ -38,62 +38,56 @@
 #define FUNCTIONFS_MAGIC	0xa647361 /* Chosen by a honest dice roll ;) */
 
 
-/* Debuging *****************************************************************/
-
-#define ffs_printk(level, fmt, args...) printk(level "f_fs: " fmt "\n", ## args)
-
-#define FERR(...)  ffs_printk(KERN_ERR,  __VA_ARGS__)
-#define FINFO(...) ffs_printk(KERN_INFO, __VA_ARGS__)
-
-#ifdef DEBUG
-#  define FDBG(...) ffs_printk(KERN_DEBUG, __VA_ARGS__)
-#else
-#  define FDBG(...) do { } while (0)
-#endif /* DEBUG */
-
-#ifdef VERBOSE_DEBUG
-#  define FVDBG FDBG
-#else
-#  define FVDBG(...) do { } while (0)
-#endif /* VERBOSE_DEBUG */
-
-#define ENTER()    FVDBG("%s()", __func__)
+/* Debugging ****************************************************************/
 
 #ifdef VERBOSE_DEBUG
+#  define pr_vdebug pr_debug
 #  define ffs_dump_mem(prefix, ptr, len) \
-	print_hex_dump_bytes("f_fs" prefix ": ", DUMP_PREFIX_NONE, ptr, len)
+	print_hex_dump_bytes(pr_fmt(prefix ": "), DUMP_PREFIX_NONE, ptr, len)
 #else
+#  define pr_vdebug(...)                 do { } while (0)
 #  define ffs_dump_mem(prefix, ptr, len) do { } while (0)
-#endif
+#endif /* VERBOSE_DEBUG */
+
+#define ENTER()    pr_vdebug("%s()\n", __func__)
 
 
 /* The data structure and setup file ****************************************/
 
 enum ffs_state {
-	/* Waiting for descriptors and strings. */
-	/* In this state no open(2), read(2) or write(2) on epfiles
+	/*
+	 * Waiting for descriptors and strings.
+	 *
+	 * In this state no open(2), read(2) or write(2) on epfiles
 	 * may succeed (which should not be the problem as there
-	 * should be no such files opened in the firts place). */
+	 * should be no such files opened in the first place).
+	 */
 	FFS_READ_DESCRIPTORS,
 	FFS_READ_STRINGS,
 
-	/* We've got descriptors and strings.  We are or have called
+	/*
+	 * We've got descriptors and strings.  We are or have called
 	 * functionfs_ready_callback().  functionfs_bind() may have
-	 * been called but we don't know. */
-	/* This is the only state in which operations on epfiles may
-	 * succeed. */
+	 * been called but we don't know.
+	 *
+	 * This is the only state in which operations on epfiles may
+	 * succeed.
+	 */
 	FFS_ACTIVE,
 
-	/* All endpoints have been closed.  This state is also set if
+	/*
+	 * All endpoints have been closed.  This state is also set if
 	 * we encounter an unrecoverable error.  The only
 	 * unrecoverable error is situation when after reading strings
-	 * from user space we fail to initialise EP files or
-	 * functionfs_ready_callback() returns with error (<0). */
-	/* In this state no open(2), read(2) or write(2) (both on ep0
+	 * from user space we fail to initialise epfiles or
+	 * functionfs_ready_callback() returns with error (<0).
+	 *
+	 * In this state no open(2), read(2) or write(2) (both on ep0
 	 * as well as epfile) may succeed (at this point epfiles are
 	 * unlinked and all closed so this is not a problem; ep0 is
 	 * also closed but ep0 file exists and so open(2) on ep0 must
-	 * fail). */
+	 * fail).
+	 */
 	FFS_CLOSING
 };
 
@@ -101,14 +95,18 @@ enum ffs_state {
 enum ffs_setup_state {
 	/* There is no setup request pending. */
 	FFS_NO_SETUP,
-	/* User has read events and there was a setup request event
+	/*
+	 * User has read events and there was a setup request event
 	 * there.  The next read/write on ep0 will handle the
-	 * request. */
+	 * request.
+	 */
 	FFS_SETUP_PENDING,
-	/* There was event pending but before user space handled it
+	/*
+	 * There was event pending but before user space handled it
 	 * some other event was introduced which canceled existing
 	 * setup.  If this state is set read/write on ep0 return
-	 * -EIDRM.  This state is only set when adding event. */
+	 * -EIDRM.  This state is only set when adding event.
+	 */
 	FFS_SETUP_CANCELED
 };
 
@@ -120,23 +118,29 @@ struct ffs_function;
 struct ffs_data {
 	struct usb_gadget		*gadget;
 
-	/* Protect access read/write operations, only one read/write
+	/*
+	 * Protect access read/write operations, only one read/write
 	 * at a time.  As a consequence protects ep0req and company.
 	 * While setup request is being processed (queued) this is
-	 * held. */
+	 * held.
+	 */
 	struct mutex			mutex;
 
-	/* Protect access to enpoint related structures (basically
+	/*
+	 * Protect access to endpoint related structures (basically
 	 * usb_ep_queue(), usb_ep_dequeue(), etc. calls) except for
-	 * endpint zero. */
+	 * endpoint zero.
+	 */
 	spinlock_t			eps_lock;
 
-	/* XXX REVISIT do we need our own request? Since we are not
-	 * handling setup requests immidiatelly user space may be so
+	/*
+	 * XXX REVISIT do we need our own request? Since we are not
+	 * handling setup requests immediately user space may be so
 	 * slow that another setup will be sent to the gadget but this
 	 * time not to us but another function and then there could be
 	 * a race.  Is that the case? Or maybe we can use cdev->req
-	 * after all, maybe we just need some spinlock for that? */
+	 * after all, maybe we just need some spinlock for that?
+	 */
 	struct usb_request		*ep0req;		/* P: mutex */
 	struct completion		ep0req_completion;	/* P: mutex */
 	int				ep0req_status;		/* P: mutex */
@@ -150,7 +154,7 @@ struct ffs_data {
 	enum ffs_state			state;
 
 	/*
-	 * Possible transations:
+	 * Possible transitions:
 	 * + FFS_NO_SETUP       -> FFS_SETUP_PENDING  -- P: ev.waitq.lock
 	 *               happens only in ep0 read which is P: mutex
 	 * + FFS_SETUP_PENDING  -> FFS_NO_SETUP       -- P: ev.waitq.lock
@@ -183,18 +187,21 @@ struct ffs_data {
 	/* Active function */
 	struct ffs_function		*func;
 
-	/* Device name, write once when file system is mounted.
-	 * Intendet for user to read if she wants. */
+	/*
+	 * Device name, write once when file system is mounted.
+	 * Intended for user to read if she wants.
+	 */
 	const char			*dev_name;
-	/* Private data for our user (ie. gadget).  Managed by
-	 * user. */
+	/* Private data for our user (ie. gadget).  Managed by user. */
 	void				*private_data;
 
 	/* filled by __ffs_data_got_descs() */
-	/* real descriptors are 16 bytes after raw_descs (so you need
+	/*
+	 * Real descriptors are 16 bytes after raw_descs (so you need
 	 * to skip 16 bytes (ie. ffs->raw_descs + 16) to get to the
 	 * first full speed descriptor).  raw_descs_length and
-	 * raw_fs_descs_length do not have those 16 bytes added. */
+	 * raw_fs_descs_length do not have those 16 bytes added.
+	 */
 	const void			*raw_descs;
 	unsigned			raw_descs_length;
 	unsigned			raw_fs_descs_length;
@@ -211,18 +218,23 @@ struct ffs_data {
 	const void			*raw_strings;
 	struct usb_gadget_strings	**stringtabs;
 
-	/* File system's super block, write once when file system is mounted. */
+	/*
+	 * File system's super block, write once when file system is
+	 * mounted.
+	 */
 	struct super_block		*sb;
 
-	/* File permissions, written once when fs is mounted*/
+	/* File permissions, written once when fs is mounted */
 	struct ffs_file_perms {
 		umode_t				mode;
 		uid_t				uid;
 		gid_t				gid;
 	}				file_perms;
 
-	/* The endpoint files, filled by ffs_epfiles_create(),
-	 * destroyed by ffs_epfiles_destroy(). */
+	/*
+	 * The endpoint files, filled by ffs_epfiles_create(),
+	 * destroyed by ffs_epfiles_destroy().
+	 */
 	struct ffs_epfile		*epfiles;
 };
 
@@ -236,7 +248,7 @@ static struct ffs_data *__must_check ffs_data_new(void) __attribute__((malloc));
 static void ffs_data_opened(struct ffs_data *ffs);
 static void ffs_data_closed(struct ffs_data *ffs);
 
-/* Called with ffs->mutex held; take over ownerrship of data. */
+/* Called with ffs->mutex held; take over ownership of data. */
 static int __must_check
 __ffs_data_got_descs(struct ffs_data *ffs, char *data, size_t len);
 static int __must_check
@@ -267,11 +279,9 @@ static struct ffs_function *ffs_func_from_usb(struct usb_function *f)
 
 static void ffs_func_free(struct ffs_function *func);
 
-
 static void ffs_func_eps_disable(struct ffs_function *func);
 static int __must_check ffs_func_eps_enable(struct ffs_function *func);
 
-
 static int ffs_func_bind(struct usb_configuration *,
 			 struct usb_function *);
 static void ffs_func_unbind(struct usb_configuration *,
@@ -288,7 +298,6 @@ static int ffs_func_revmap_ep(struct ffs_function *func, u8 num);
 static int ffs_func_revmap_intf(struct ffs_function *func, u8 intf);
 
 
-
 /* The endpoints structures *************************************************/
 
 struct ffs_ep {
@@ -321,7 +330,6 @@ struct ffs_epfile {
 	unsigned char			_pad;
 };
 
-
 static int  __must_check ffs_epfiles_create(struct ffs_data *ffs);
 static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count);
 
@@ -348,7 +356,6 @@ static void ffs_ep0_complete(struct usb_ep *ep, struct usb_request *req)
 	complete_all(&ffs->ep0req_completion);
 }
 
-
 static int __ffs_ep0_queue_wait(struct ffs_data *ffs, char *data, size_t len)
 {
 	struct usb_request *req = ffs->ep0req;
@@ -380,17 +387,16 @@ static int __ffs_ep0_queue_wait(struct ffs_data *ffs, char *data, size_t len)
 static int __ffs_ep0_stall(struct ffs_data *ffs)
 {
 	if (ffs->ev.can_stall) {
-		FVDBG("ep0 stall\n");
+		pr_vdebug("ep0 stall\n");
 		usb_ep_set_halt(ffs->gadget->ep0);
 		ffs->setup_state = FFS_NO_SETUP;
 		return -EL2HLT;
 	} else {
-		FDBG("bogus ep0 stall!\n");
+		pr_debug("bogus ep0 stall!\n");
 		return -ESRCH;
 	}
 }
 
-
 static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 			     size_t len, loff_t *ptr)
 {
@@ -409,7 +415,6 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 	if (unlikely(ret < 0))
 		return ret;
 
-
 	/* Check state */
 	switch (ffs->state) {
 	case FFS_READ_DESCRIPTORS:
@@ -421,14 +426,14 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 		}
 
 		data = ffs_prepare_buffer(buf, len);
-		if (unlikely(IS_ERR(data))) {
+		if (IS_ERR(data)) {
 			ret = PTR_ERR(data);
 			break;
 		}
 
 		/* Handle data */
 		if (ffs->state == FFS_READ_DESCRIPTORS) {
-			FINFO("read descriptors");
+			pr_info("read descriptors\n");
 			ret = __ffs_data_got_descs(ffs, data, len);
 			if (unlikely(ret < 0))
 				break;
@@ -436,7 +441,7 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 			ffs->state = FFS_READ_STRINGS;
 			ret = len;
 		} else {
-			FINFO("read strings");
+			pr_info("read strings\n");
 			ret = __ffs_data_got_strings(ffs, data, len);
 			if (unlikely(ret < 0))
 				break;
@@ -461,11 +466,12 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 		}
 		break;
 
-
 	case FFS_ACTIVE:
 		data = NULL;
-		/* We're called from user space, we can use _irq
-		 * rather then _irqsave */
+		/*
+		 * We're called from user space, we can use _irq
+		 * rather then _irqsave
+		 */
 		spin_lock_irq(&ffs->ev.waitq.lock);
 		switch (FFS_SETUP_STATE(ffs)) {
 		case FFS_SETUP_CANCELED:
@@ -493,23 +499,25 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 		spin_unlock_irq(&ffs->ev.waitq.lock);
 
 		data = ffs_prepare_buffer(buf, len);
-		if (unlikely(IS_ERR(data))) {
+		if (IS_ERR(data)) {
 			ret = PTR_ERR(data);
 			break;
 		}
 
 		spin_lock_irq(&ffs->ev.waitq.lock);
 
-		/* We are guaranteed to be still in FFS_ACTIVE state
+		/*
+		 * We are guaranteed to be still in FFS_ACTIVE state
 		 * but the state of setup could have changed from
 		 * FFS_SETUP_PENDING to FFS_SETUP_CANCELED so we need
 		 * to check for that.  If that happened we copied data
-		 * from user space in vain but it's unlikely. */
-		/* For sure we are not in FFS_NO_SETUP since this is
+		 * from user space in vain but it's unlikely.
+		 *
+		 * For sure we are not in FFS_NO_SETUP since this is
 		 * the only place FFS_SETUP_PENDING -> FFS_NO_SETUP
 		 * transition can be performed and it's protected by
-		 * mutex. */
-
+		 * mutex.
+		 */
 		if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) {
 			ret = -EIDRM;
 done_spin:
@@ -521,25 +529,22 @@ done_spin:
 		kfree(data);
 		break;
 
-
 	default:
 		ret = -EBADFD;
 		break;
 	}
 
-
 	mutex_unlock(&ffs->mutex);
 	return ret;
 }
 
-
-
 static ssize_t __ffs_ep0_read_events(struct ffs_data *ffs, char __user *buf,
 				     size_t n)
 {
-	/* We are holding ffs->ev.waitq.lock and ffs->mutex and we need
-	 * to release them. */
-
+	/*
+	 * We are holding ffs->ev.waitq.lock and ffs->mutex and we need
+	 * to release them.
+	 */
 	struct usb_functionfs_event events[n];
 	unsigned i = 0;
 
@@ -568,7 +573,6 @@ static ssize_t __ffs_ep0_read_events(struct ffs_data *ffs, char __user *buf,
 		? -EFAULT : sizeof events;
 }
 
-
 static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
 			    size_t len, loff_t *ptr)
 {
@@ -588,16 +592,16 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
 	if (unlikely(ret < 0))
 		return ret;
 
-
 	/* Check state */
 	if (ffs->state != FFS_ACTIVE) {
 		ret = -EBADFD;
 		goto done_mutex;
 	}
 
-
-	/* We're called from user space, we can use _irq rather then
-	 * _irqsave */
+	/*
+	 * We're called from user space, we can use _irq rather then
+	 * _irqsave
+	 */
 	spin_lock_irq(&ffs->ev.waitq.lock);
 
 	switch (FFS_SETUP_STATE(ffs)) {
@@ -617,7 +621,8 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
 			break;
 		}
 
-		if (unlikely(wait_event_interruptible_exclusive_locked_irq(ffs->ev.waitq, ffs->ev.count))) {
+		if (wait_event_interruptible_exclusive_locked_irq(ffs->ev.waitq,
+							ffs->ev.count)) {
 			ret = -EINTR;
 			break;
 		}
@@ -625,7 +630,6 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
 		return __ffs_ep0_read_events(ffs, buf,
 					     min(n, (size_t)ffs->ev.count));
 
-
 	case FFS_SETUP_PENDING:
 		if (ffs->ev.setup.bRequestType & USB_DIR_IN) {
 			spin_unlock_irq(&ffs->ev.waitq.lock);
@@ -671,8 +675,6 @@ done_mutex:
 	return ret;
 }
 
-
-
 static int ffs_ep0_open(struct inode *inode, struct file *file)
 {
 	struct ffs_data *ffs = inode->i_private;
@@ -688,7 +690,6 @@ static int ffs_ep0_open(struct inode *inode, struct file *file)
 	return 0;
 }
 
-
 static int ffs_ep0_release(struct inode *inode, struct file *file)
 {
 	struct ffs_data *ffs = file->private_data;
@@ -700,7 +701,6 @@ static int ffs_ep0_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-
 static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value)
 {
 	struct ffs_data *ffs = file->private_data;
@@ -721,7 +721,6 @@ static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value)
 	return ret;
 }
 
-
 static const struct file_operations ffs_ep0_operations = {
 	.owner =	THIS_MODULE,
 	.llseek =	no_llseek,
@@ -736,7 +735,6 @@ static const struct file_operations ffs_ep0_operations = {
 
 /* "Normal" endpoints operations ********************************************/
 
-
 static void ffs_epfile_io_complete(struct usb_ep *_ep, struct usb_request *req)
 {
 	ENTER();
@@ -747,7 +745,6 @@ static void ffs_epfile_io_complete(struct usb_ep *_ep, struct usb_request *req)
 	}
 }
 
-
 static ssize_t ffs_epfile_io(struct file *file,
 			     char __user *buf, size_t len, int read)
 {
@@ -777,8 +774,8 @@ first_try:
 				goto error;
 			}
 
-			if (unlikely(wait_event_interruptible
-				     (epfile->wait, (ep = epfile->ep)))) {
+			if (wait_event_interruptible(epfile->wait,
+						     (ep = epfile->ep))) {
 				ret = -EINTR;
 				goto error;
 			}
@@ -810,12 +807,16 @@ first_try:
 		if (unlikely(ret))
 			goto error;
 
-		/* We're called from user space, we can use _irq rather then
-		 * _irqsave */
+		/*
+		 * We're called from user space, we can use _irq rather then
+		 * _irqsave
+		 */
 		spin_lock_irq(&epfile->ffs->eps_lock);
 
-		/* While we were acquiring mutex endpoint got disabled
-		 * or changed? */
+		/*
+		 * While we were acquiring mutex endpoint got disabled
+		 * or changed?
+		 */
 	} while (unlikely(epfile->ep != ep));
 
 	/* Halt */
@@ -857,7 +858,6 @@ error:
 	return ret;
 }
 
-
 static ssize_t
 ffs_epfile_write(struct file *file, const char __user *buf, size_t len,
 		 loff_t *ptr)
@@ -903,7 +903,6 @@ ffs_epfile_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-
 static long ffs_epfile_ioctl(struct file *file, unsigned code,
 			     unsigned long value)
 {
@@ -942,7 +941,6 @@ static long ffs_epfile_ioctl(struct file *file, unsigned code,
 	return ret;
 }
 
-
 static const struct file_operations ffs_epfile_operations = {
 	.owner =	THIS_MODULE,
 	.llseek =	no_llseek,
@@ -955,15 +953,13 @@ static const struct file_operations ffs_epfile_operations = {
 };
 
 
-
 /* File system and super block operations ***********************************/
 
 /*
- * Mounting the filesystem creates a controller file, used first for
+ * Mounting the file system creates a controller file, used first for
  * function configuration then later for event monitoring.
  */
 
-
 static struct inode *__must_check
 ffs_sb_make_inode(struct super_block *sb, void *data,
 		  const struct file_operations *fops,
@@ -996,9 +992,7 @@ ffs_sb_make_inode(struct super_block *sb, void *data,
 	return inode;
 }
 
-
 /* Create "regular" file */
-
 static struct inode *ffs_sb_create_file(struct super_block *sb,
 					const char *name, void *data,
 					const struct file_operations *fops,
@@ -1027,9 +1021,7 @@ static struct inode *ffs_sb_create_file(struct super_block *sb,
 	return inode;
 }
 
-
 /* Super block */
-
 static const struct super_operations ffs_sb_operations = {
 	.statfs =	simple_statfs,
 	.drop_inode =	generic_delete_inode,
@@ -1050,7 +1042,7 @@ static int ffs_sb_fill(struct super_block *sb, void *_data, int silent)
 
 	ENTER();
 
-	/* Initialize data */
+	/* Initialise data */
 	ffs = ffs_data_new();
 	if (unlikely(!ffs))
 		goto enomem0;
@@ -1096,7 +1088,6 @@ enomem0:
 	return -ENOMEM;
 }
 
-
 static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts)
 {
 	ENTER();
@@ -1116,7 +1107,7 @@ static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts)
 		/* Value limit */
 		eq = strchr(opts, '=');
 		if (unlikely(!eq)) {
-			FERR("'=' missing in %s", opts);
+			pr_err("'=' missing in %s\n", opts);
 			return -EINVAL;
 		}
 		*eq = 0;
@@ -1124,7 +1115,7 @@ static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts)
 		/* Parse value */
 		value = simple_strtoul(eq + 1, &end, 0);
 		if (unlikely(*end != ',' && *end != 0)) {
-			FERR("%s: invalid value: %s", opts, eq + 1);
+			pr_err("%s: invalid value: %s\n", opts, eq + 1);
 			return -EINVAL;
 		}
 
@@ -1159,7 +1150,7 @@ static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts)
 
 		default:
 invalid:
-			FERR("%s: invalid option", opts);
+			pr_err("%s: invalid option\n", opts);
 			return -EINVAL;
 		}
 
@@ -1172,7 +1163,6 @@ invalid:
 	return 0;
 }
 
-
 /* "mount -t functionfs dev_name /dev/function" ends up here */
 
 static struct dentry *
@@ -1224,10 +1214,8 @@ static struct file_system_type ffs_fs_type = {
 };
 
 
-
 /* Driver's main init/cleanup functions *************************************/
 
-
 static int functionfs_init(void)
 {
 	int ret;
@@ -1236,9 +1224,9 @@ static int functionfs_init(void)
 
 	ret = register_filesystem(&ffs_fs_type);
 	if (likely(!ret))
-		FINFO("file system registered");
+		pr_info("file system registered\n");
 	else
-		FERR("failed registering file system (%d)", ret);
+		pr_err("failed registering file system (%d)\n", ret);
 
 	return ret;
 }
@@ -1247,18 +1235,16 @@ static void functionfs_cleanup(void)
 {
 	ENTER();
 
-	FINFO("unloading");
+	pr_info("unloading\n");
 	unregister_filesystem(&ffs_fs_type);
 }
 
 
-
 /* ffs_data and ffs_function construction and destruction code **************/
 
 static void ffs_data_clear(struct ffs_data *ffs);
 static void ffs_data_reset(struct ffs_data *ffs);
 
-
 static void ffs_data_get(struct ffs_data *ffs)
 {
 	ENTER();
@@ -1279,7 +1265,7 @@ static void ffs_data_put(struct ffs_data *ffs)
 	ENTER();
 
 	if (unlikely(atomic_dec_and_test(&ffs->ref))) {
-		FINFO("%s(): freeing", __func__);
+		pr_info("%s(): freeing\n", __func__);
 		ffs_data_clear(ffs);
 		BUG_ON(mutex_is_locked(&ffs->mutex) ||
 		       spin_is_locked(&ffs->ev.waitq.lock) ||
@@ -1289,8 +1275,6 @@ static void ffs_data_put(struct ffs_data *ffs)
 	}
 }
 
-
-
 static void ffs_data_closed(struct ffs_data *ffs)
 {
 	ENTER();
@@ -1303,7 +1287,6 @@ static void ffs_data_closed(struct ffs_data *ffs)
 	ffs_data_put(ffs);
 }
 
-
 static struct ffs_data *ffs_data_new(void)
 {
 	struct ffs_data *ffs = kzalloc(sizeof *ffs, GFP_KERNEL);
@@ -1326,7 +1309,6 @@ static struct ffs_data *ffs_data_new(void)
 	return ffs;
 }
 
-
 static void ffs_data_clear(struct ffs_data *ffs)
 {
 	ENTER();
@@ -1344,7 +1326,6 @@ static void ffs_data_clear(struct ffs_data *ffs)
 	kfree(ffs->stringtabs);
 }
 
-
 static void ffs_data_reset(struct ffs_data *ffs)
 {
 	ENTER();
@@ -1407,7 +1388,6 @@ static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
 	return 0;
 }
 
-
 static void functionfs_unbind(struct ffs_data *ffs)
 {
 	ENTER();
@@ -1420,7 +1400,6 @@ static void functionfs_unbind(struct ffs_data *ffs)
 	}
 }
 
-
 static int ffs_epfiles_create(struct ffs_data *ffs)
 {
 	struct ffs_epfile *epfile, *epfiles;
@@ -1451,7 +1430,6 @@ static int ffs_epfiles_create(struct ffs_data *ffs)
 	return 0;
 }
 
-
 static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count)
 {
 	struct ffs_epfile *epfile = epfiles;
@@ -1471,7 +1449,6 @@ static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count)
 	kfree(epfiles);
 }
 
-
 static int functionfs_bind_config(struct usb_composite_dev *cdev,
 				  struct usb_configuration *c,
 				  struct ffs_data *ffs)
@@ -1491,7 +1468,6 @@ static int functionfs_bind_config(struct usb_composite_dev *cdev,
 	func->function.bind    = ffs_func_bind;
 	func->function.unbind  = ffs_func_unbind;
 	func->function.set_alt = ffs_func_set_alt;
-	/*func->function.get_alt = ffs_func_get_alt;*/
 	func->function.disable = ffs_func_disable;
 	func->function.setup   = ffs_func_setup;
 	func->function.suspend = ffs_func_suspend;
@@ -1516,14 +1492,15 @@ static void ffs_func_free(struct ffs_function *func)
 	ffs_data_put(func->ffs);
 
 	kfree(func->eps);
-	/* eps and interfaces_nums are allocated in the same chunk so
+	/*
+	 * eps and interfaces_nums are allocated in the same chunk so
 	 * only one free is required.  Descriptors are also allocated
-	 * in the same chunk. */
+	 * in the same chunk.
+	 */
 
 	kfree(func);
 }
 
-
 static void ffs_func_eps_disable(struct ffs_function *func)
 {
 	struct ffs_ep *ep         = func->eps;
@@ -1581,11 +1558,12 @@ static int ffs_func_eps_enable(struct ffs_function *func)
 
 /* Parsing and building descriptors and strings *****************************/
 
-
-/* This validates if data pointed by data is a valid USB descriptor as
+/*
+ * This validates if data pointed by data is a valid USB descriptor as
  * well as record how many interfaces, endpoints and strings are
- * required by given configuration.  Returns address afther the
- * descriptor or NULL if data is invalid. */
+ * required by given configuration.  Returns address after the
+ * descriptor or NULL if data is invalid.
+ */
 
 enum ffs_entity_type {
 	FFS_DESCRIPTOR, FFS_INTERFACE, FFS_STRING, FFS_ENDPOINT
@@ -1607,14 +1585,14 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 
 	/* At least two bytes are required: length and type */
 	if (len < 2) {
-		FVDBG("descriptor too short");
+		pr_vdebug("descriptor too short\n");
 		return -EINVAL;
 	}
 
 	/* If we have at least as many bytes as the descriptor takes? */
 	length = _ds->bLength;
 	if (len < length) {
-		FVDBG("descriptor longer then available data");
+		pr_vdebug("descriptor longer then available data\n");
 		return -EINVAL;
 	}
 
@@ -1622,15 +1600,15 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 #define __entity_check_STRING(val)     (val)
 #define __entity_check_ENDPOINT(val)   ((val) & USB_ENDPOINT_NUMBER_MASK)
 #define __entity(type, val) do {					\
-		FVDBG("entity " #type "(%02x)", (val));			\
+		pr_vdebug("entity " #type "(%02x)\n", (val));		\
 		if (unlikely(!__entity_check_ ##type(val))) {		\
-			FVDBG("invalid entity's value");		\
+			pr_vdebug("invalid entity's value\n");		\
 			return -EINVAL;					\
 		}							\
 		ret = entity(FFS_ ##type, &val, _ds, priv);		\
 		if (unlikely(ret < 0)) {				\
-			FDBG("entity " #type "(%02x); ret = %d",	\
-			     (val), ret);				\
+			pr_debug("entity " #type "(%02x); ret = %d\n",	\
+				 (val), ret);				\
 			return ret;					\
 		}							\
 	} while (0)
@@ -1642,12 +1620,13 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 	case USB_DT_STRING:
 	case USB_DT_DEVICE_QUALIFIER:
 		/* function can't have any of those */
-		FVDBG("descriptor reserved for gadget: %d", _ds->bDescriptorType);
+		pr_vdebug("descriptor reserved for gadget: %d\n",
+		      _ds->bDescriptorType);
 		return -EINVAL;
 
 	case USB_DT_INTERFACE: {
 		struct usb_interface_descriptor *ds = (void *)_ds;
-		FVDBG("interface descriptor");
+		pr_vdebug("interface descriptor\n");
 		if (length != sizeof *ds)
 			goto inv_length;
 
@@ -1659,7 +1638,7 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 
 	case USB_DT_ENDPOINT: {
 		struct usb_endpoint_descriptor *ds = (void *)_ds;
-		FVDBG("endpoint descriptor");
+		pr_vdebug("endpoint descriptor\n");
 		if (length != USB_DT_ENDPOINT_SIZE &&
 		    length != USB_DT_ENDPOINT_AUDIO_SIZE)
 			goto inv_length;
@@ -1674,7 +1653,7 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 
 	case USB_DT_INTERFACE_ASSOCIATION: {
 		struct usb_interface_assoc_descriptor *ds = (void *)_ds;
-		FVDBG("interface association descriptor");
+		pr_vdebug("interface association descriptor\n");
 		if (length != sizeof *ds)
 			goto inv_length;
 		if (ds->iFunction)
@@ -1688,17 +1667,17 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 	case USB_DT_SECURITY:
 	case USB_DT_CS_RADIO_CONTROL:
 		/* TODO */
-		FVDBG("unimplemented descriptor: %d", _ds->bDescriptorType);
+		pr_vdebug("unimplemented descriptor: %d\n", _ds->bDescriptorType);
 		return -EINVAL;
 
 	default:
 		/* We should never be here */
-		FVDBG("unknown descriptor: %d", _ds->bDescriptorType);
+		pr_vdebug("unknown descriptor: %d\n", _ds->bDescriptorType);
 		return -EINVAL;
 
-	inv_length:
-		FVDBG("invalid length: %d (descriptor %d)",
-		      _ds->bLength, _ds->bDescriptorType);
+inv_length:
+		pr_vdebug("invalid length: %d (descriptor %d)\n",
+			  _ds->bLength, _ds->bDescriptorType);
 		return -EINVAL;
 	}
 
@@ -1711,7 +1690,6 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 	return length;
 }
 
-
 static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len,
 				     ffs_entity_callback entity, void *priv)
 {
@@ -1726,10 +1704,11 @@ static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len,
 		if (num == count)
 			data = NULL;
 
-		/* Record "descriptor" entitny */
+		/* Record "descriptor" entity */
 		ret = entity(FFS_DESCRIPTOR, (u8 *)num, (void *)data, priv);
 		if (unlikely(ret < 0)) {
-			FDBG("entity DESCRIPTOR(%02lx); ret = %d", num, ret);
+			pr_debug("entity DESCRIPTOR(%02lx); ret = %d\n",
+				 num, ret);
 			return ret;
 		}
 
@@ -1738,7 +1717,7 @@ static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len,
 
 		ret = ffs_do_desc(data, len, entity, priv);
 		if (unlikely(ret < 0)) {
-			FDBG("%s returns %d", __func__, ret);
+			pr_debug("%s returns %d\n", __func__, ret);
 			return ret;
 		}
 
@@ -1748,7 +1727,6 @@ static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len,
 	}
 }
 
-
 static int __ffs_data_do_entity(enum ffs_entity_type type,
 				u8 *valuep, struct usb_descriptor_header *desc,
 				void *priv)
@@ -1762,16 +1740,20 @@ static int __ffs_data_do_entity(enum ffs_entity_type type,
 		break;
 
 	case FFS_INTERFACE:
-		/* Interfaces are indexed from zero so if we
+		/*
+		 * Interfaces are indexed from zero so if we
 		 * encountered interface "n" then there are at least
-		 * "n+1" interfaces. */
+		 * "n+1" interfaces.
+		 */
 		if (*valuep >= ffs->interfaces_count)
 			ffs->interfaces_count = *valuep + 1;
 		break;
 
 	case FFS_STRING:
-		/* Strings are indexed from 1 (0 is magic ;) reserved
-		 * for languages list or some such) */
+		/*
+		 * Strings are indexed from 1 (0 is magic ;) reserved
+		 * for languages list or some such)
+		 */
 		if (*valuep > ffs->strings_count)
 			ffs->strings_count = *valuep;
 		break;
@@ -1786,7 +1768,6 @@ static int __ffs_data_do_entity(enum ffs_entity_type type,
 	return 0;
 }
 
-
 static int __ffs_data_got_descs(struct ffs_data *ffs,
 				char *const _data, size_t len)
 {
@@ -1849,8 +1830,6 @@ error:
 	return ret;
 }
 
-
-
 static int __ffs_data_got_strings(struct ffs_data *ffs,
 				  char *const _data, size_t len)
 {
@@ -1876,17 +1855,17 @@ static int __ffs_data_got_strings(struct ffs_data *ffs,
 	if (unlikely(str_count < needed_count))
 		goto error;
 
-	/* If we don't need any strings just return and free all
-	 * memory */
+	/*
+	 * If we don't need any strings just return and free all
+	 * memory.
+	 */
 	if (!needed_count) {
 		kfree(_data);
 		return 0;
 	}
 
-	/* Allocate */
+	/* Allocate everything in one chunk so there's less maintenance. */
 	{
-		/* Allocate everything in one chunk so there's less
-		 * maintanance. */
 		struct {
 			struct usb_gadget_strings *stringtabs[lang_count + 1];
 			struct usb_gadget_strings stringtab[lang_count];
@@ -1937,13 +1916,17 @@ static int __ffs_data_got_strings(struct ffs_data *ffs,
 			if (unlikely(length == len))
 				goto error_free;
 
-			/* user may provide more strings then we need,
-			 * if that's the case we simply ingore the
-			 * rest */
+			/*
+			 * User may provide more strings then we need,
+			 * if that's the case we simply ignore the
+			 * rest
+			 */
 			if (likely(needed)) {
-				/* s->id will be set while adding
+				/*
+				 * s->id will be set while adding
 				 * function to configuration so for
-				 * now just leave garbage here. */
+				 * now just leave garbage here.
+				 */
 				s->s = data;
 				--needed;
 				++s;
@@ -1977,8 +1960,6 @@ error:
 }
 
 
-
-
 /* Events handling and management *******************************************/
 
 static void __ffs_event_add(struct ffs_data *ffs,
@@ -1987,29 +1968,32 @@ static void __ffs_event_add(struct ffs_data *ffs,
 	enum usb_functionfs_event_type rem_type1, rem_type2 = type;
 	int neg = 0;
 
-	/* Abort any unhandled setup */
-	/* We do not need to worry about some cmpxchg() changing value
+	/*
+	 * Abort any unhandled setup
+	 *
+	 * We do not need to worry about some cmpxchg() changing value
 	 * of ffs->setup_state without holding the lock because when
 	 * state is FFS_SETUP_PENDING cmpxchg() in several places in
-	 * the source does nothing. */
+	 * the source does nothing.
+	 */
 	if (ffs->setup_state == FFS_SETUP_PENDING)
 		ffs->setup_state = FFS_SETUP_CANCELED;
 
 	switch (type) {
 	case FUNCTIONFS_RESUME:
 		rem_type2 = FUNCTIONFS_SUSPEND;
-		/* FALL THGOUTH */
+		/* FALL THROUGH */
 	case FUNCTIONFS_SUSPEND:
 	case FUNCTIONFS_SETUP:
 		rem_type1 = type;
-		/* discard all similar events */
+		/* Discard all similar events */
 		break;
 
 	case FUNCTIONFS_BIND:
 	case FUNCTIONFS_UNBIND:
 	case FUNCTIONFS_DISABLE:
 	case FUNCTIONFS_ENABLE:
-		/* discard everything other then power management. */
+		/* Discard everything other then power management. */
 		rem_type1 = FUNCTIONFS_SUSPEND;
 		rem_type2 = FUNCTIONFS_RESUME;
 		neg = 1;
@@ -2026,11 +2010,11 @@ static void __ffs_event_add(struct ffs_data *ffs,
 			if ((*ev == rem_type1 || *ev == rem_type2) == neg)
 				*out++ = *ev;
 			else
-				FVDBG("purging event %d", *ev);
+				pr_vdebug("purging event %d\n", *ev);
 		ffs->ev.count = out - ffs->ev.types;
 	}
 
-	FVDBG("adding event %d", type);
+	pr_vdebug("adding event %d\n", type);
 	ffs->ev.types[ffs->ev.count++] = type;
 	wake_up_locked(&ffs->ev.waitq);
 }
@@ -2055,8 +2039,10 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
 	struct ffs_function *func = priv;
 	struct ffs_ep *ffs_ep;
 
-	/* If hs_descriptors is not NULL then we are reading hs
-	 * descriptors now */
+	/*
+	 * If hs_descriptors is not NULL then we are reading hs
+	 * descriptors now
+	 */
 	const int isHS = func->function.hs_descriptors != NULL;
 	unsigned idx;
 
@@ -2075,9 +2061,9 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
 	ffs_ep = func->eps + idx;
 
 	if (unlikely(ffs_ep->descs[isHS])) {
-		FVDBG("two %sspeed descriptors for EP %d",
-		      isHS ? "high" : "full",
-		      ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+		pr_vdebug("two %sspeed descriptors for EP %d\n",
+			  isHS ? "high" : "full",
+			  ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 		return -EINVAL;
 	}
 	ffs_ep->descs[isHS] = ds;
@@ -2091,11 +2077,11 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
 		struct usb_request *req;
 		struct usb_ep *ep;
 
-		FVDBG("autoconfig");
+		pr_vdebug("autoconfig\n");
 		ep = usb_ep_autoconfig(func->gadget, ds);
 		if (unlikely(!ep))
 			return -ENOTSUPP;
-		ep->driver_data = func->eps + idx;;
+		ep->driver_data = func->eps + idx;
 
 		req = usb_ep_alloc_request(ep, GFP_KERNEL);
 		if (unlikely(!req))
@@ -2111,7 +2097,6 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
 	return 0;
 }
 
-
 static int __ffs_func_bind_do_nums(enum ffs_entity_type type, u8 *valuep,
 				   struct usb_descriptor_header *desc,
 				   void *priv)
@@ -2143,8 +2128,10 @@ static int __ffs_func_bind_do_nums(enum ffs_entity_type type, u8 *valuep,
 		break;
 
 	case FFS_ENDPOINT:
-		/* USB_DT_ENDPOINT are handled in
-		 * __ffs_func_bind_do_descs(). */
+		/*
+		 * USB_DT_ENDPOINT are handled in
+		 * __ffs_func_bind_do_descs().
+		 */
 		if (desc->bDescriptorType == USB_DT_ENDPOINT)
 			return 0;
 
@@ -2160,7 +2147,7 @@ static int __ffs_func_bind_do_nums(enum ffs_entity_type type, u8 *valuep,
 		break;
 	}
 
-	FVDBG("%02x -> %02x", *valuep, newValue);
+	pr_vdebug("%02x -> %02x\n", *valuep, newValue);
 	*valuep = newValue;
 	return 0;
 }
@@ -2211,9 +2198,11 @@ static int ffs_func_bind(struct usb_configuration *c,
 	func->eps             = data->eps;
 	func->interfaces_nums = data->inums;
 
-	/* Go throught all the endpoint descriptors and allocate
+	/*
+	 * Go through all the endpoint descriptors and allocate
 	 * endpoints first, so that later we can rewrite the endpoint
-	 * numbers without worying that it may be described later on. */
+	 * numbers without worrying that it may be described later on.
+	 */
 	if (likely(full)) {
 		func->function.descriptors = data->fs_descs;
 		ret = ffs_do_descs(ffs->fs_descs_count,
@@ -2234,9 +2223,11 @@ static int ffs_func_bind(struct usb_configuration *c,
 				   __ffs_func_bind_do_descs, func);
 	}
 
-	/* Now handle interface numbers allocation and interface and
-	 * enpoint numbers rewritting.  We can do that in one go
-	 * now. */
+	/*
+	 * Now handle interface numbers allocation and interface and
+	 * endpoint numbers rewriting.  We can do that in one go
+	 * now.
+	 */
 	ret = ffs_do_descs(ffs->fs_descs_count +
 			   (high ? ffs->hs_descs_count : 0),
 			   data->raw_descs, sizeof data->raw_descs,
@@ -2274,7 +2265,6 @@ static void ffs_func_unbind(struct usb_configuration *c,
 	ffs_func_free(func);
 }
 
-
 static int ffs_func_set_alt(struct usb_function *f,
 			    unsigned interface, unsigned alt)
 {
@@ -2322,20 +2312,21 @@ static int ffs_func_setup(struct usb_function *f,
 
 	ENTER();
 
-	FVDBG("creq->bRequestType = %02x", creq->bRequestType);
-	FVDBG("creq->bRequest     = %02x", creq->bRequest);
-	FVDBG("creq->wValue       = %04x", le16_to_cpu(creq->wValue));
-	FVDBG("creq->wIndex       = %04x", le16_to_cpu(creq->wIndex));
-	FVDBG("creq->wLength      = %04x", le16_to_cpu(creq->wLength));
+	pr_vdebug("creq->bRequestType = %02x\n", creq->bRequestType);
+	pr_vdebug("creq->bRequest     = %02x\n", creq->bRequest);
+	pr_vdebug("creq->wValue       = %04x\n", le16_to_cpu(creq->wValue));
+	pr_vdebug("creq->wIndex       = %04x\n", le16_to_cpu(creq->wIndex));
+	pr_vdebug("creq->wLength      = %04x\n", le16_to_cpu(creq->wLength));
 
-	/* Most requests directed to interface go throught here
+	/*
+	 * Most requests directed to interface go through here
 	 * (notable exceptions are set/get interface) so we need to
 	 * handle them.  All other either handled by composite or
 	 * passed to usb_configuration->setup() (if one is set).  No
 	 * matter, we will handle requests directed to endpoint here
 	 * as well (as it's straightforward) but what to do with any
-	 * other request? */
-
+	 * other request?
+	 */
 	if (ffs->state != FFS_ACTIVE)
 		return -ENODEV;
 
@@ -2378,8 +2369,7 @@ static void ffs_func_resume(struct usb_function *f)
 }
 
 
-
-/* Enpoint and interface numbers reverse mapping ****************************/
+/* Endpoint and interface numbers reverse mapping ***************************/
 
 static int ffs_func_revmap_ep(struct ffs_function *func, u8 num)
 {
@@ -2410,7 +2400,6 @@ static int ffs_mutex_lock(struct mutex *mutex, unsigned nonblock)
 		: mutex_lock_interruptible(mutex);
 }
 
-
 static char *ffs_prepare_buffer(const char * __user buf, size_t len)
 {
 	char *data;
@@ -2427,7 +2416,7 @@ static char *ffs_prepare_buffer(const char * __user buf, size_t len)
 		return ERR_PTR(-EFAULT);
 	}
 
-	FVDBG("Buffer from user space:");
+	pr_vdebug("Buffer from user space:\n");
 	ffs_dump_mem("", data, len);
 
 	return data;
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 838286b1cd1..b5dbb2308f5 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -37,7 +37,6 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-
 /*
  * The Mass Storage Function acts as a USB Mass Storage device,
  * appearing to the host as a disk drive or as a CD-ROM drive.  In
@@ -185,7 +184,6 @@
  * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
  */
 
-
 /*
  *				Driver Design
  *
@@ -275,7 +273,6 @@
 /* #define VERBOSE_DEBUG */
 /* #define DUMP_MSGS */
 
-
 #include <linux/blkdev.h>
 #include <linux/completion.h>
 #include <linux/dcache.h>
@@ -300,7 +297,6 @@
 #include "gadget_chips.h"
 
 
-
 /*------------------------------------------------------------------------*/
 
 #define FSG_DRIVER_DESC		"Mass Storage Function"
@@ -308,7 +304,6 @@
 
 static const char fsg_string_interface[] = "Mass Storage";
 
-
 #define FSG_NO_INTR_EP 1
 #define FSG_NO_DEVICE_STRINGS    1
 #define FSG_NO_OTG               1
@@ -324,25 +319,30 @@ struct fsg_common;
 
 /* FSF callback functions */
 struct fsg_operations {
-	/* Callback function to call when thread exits.  If no
+	/*
+	 * Callback function to call when thread exits.  If no
 	 * callback is set or it returns value lower then zero MSF
 	 * will force eject all LUNs it operates on (including those
 	 * marked as non-removable or with prevent_medium_removal flag
-	 * set). */
+	 * set).
+	 */
 	int (*thread_exits)(struct fsg_common *common);
 
-	/* Called prior to ejection.  Negative return means error,
+	/*
+	 * Called prior to ejection.  Negative return means error,
 	 * zero means to continue with ejection, positive means not to
-	 * eject. */
+	 * eject.
+	 */
 	int (*pre_eject)(struct fsg_common *common,
 			 struct fsg_lun *lun, int num);
-	/* Called after ejection.  Negative return means error, zero
-	 * or positive is just a success. */
+	/*
+	 * Called after ejection.  Negative return means error, zero
+	 * or positive is just a success.
+	 */
 	int (*post_eject)(struct fsg_common *common,
 			  struct fsg_lun *lun, int num);
 };
 
-
 /* Data shared by all the FSG instances. */
 struct fsg_common {
 	struct usb_gadget	*gadget;
@@ -398,14 +398,15 @@ struct fsg_common {
 	/* Gadget's private data. */
 	void			*private_data;
 
-	/* Vendor (8 chars), product (16 chars), release (4
-	 * hexadecimal digits) and NUL byte */
+	/*
+	 * Vendor (8 chars), product (16 chars), release (4
+	 * hexadecimal digits) and NUL byte
+	 */
 	char inquiry_string[8 + 16 + 4 + 1];
 
 	struct kref		ref;
 };
 
-
 struct fsg_config {
 	unsigned nluns;
 	struct fsg_lun_config {
@@ -431,7 +432,6 @@ struct fsg_config {
 	char			can_stall;
 };
 
-
 struct fsg_dev {
 	struct usb_function	function;
 	struct usb_gadget	*gadget;	/* Copy of cdev->gadget */
@@ -449,7 +449,6 @@ struct fsg_dev {
 	struct usb_ep		*bulk_out;
 };
 
-
 static inline int __fsg_is_set(struct fsg_common *common,
 			       const char *func, unsigned line)
 {
@@ -462,13 +461,11 @@ static inline int __fsg_is_set(struct fsg_common *common,
 
 #define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__))
 
-
 static inline struct fsg_dev *fsg_from_func(struct usb_function *f)
 {
 	return container_of(f, struct fsg_dev, function);
 }
 
-
 typedef void (*fsg_routine_t)(struct fsg_dev *);
 
 static int exception_in_progress(struct fsg_common *common)
@@ -478,7 +475,7 @@ static int exception_in_progress(struct fsg_common *common)
 
 /* Make bulk-out requests be divisible by the maxpacket size */
 static void set_bulk_out_req_length(struct fsg_common *common,
-		struct fsg_buffhd *bh, unsigned int length)
+				    struct fsg_buffhd *bh, unsigned int length)
 {
 	unsigned int	rem;
 
@@ -489,6 +486,7 @@ static void set_bulk_out_req_length(struct fsg_common *common,
 	bh->outreq->length = length;
 }
 
+
 /*-------------------------------------------------------------------------*/
 
 static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
@@ -519,14 +517,15 @@ static void wakeup_thread(struct fsg_common *common)
 		wake_up_process(common->thread_task);
 }
 
-
 static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
 {
 	unsigned long		flags;
 
-	/* Do nothing if a higher-priority exception is already in progress.
+	/*
+	 * Do nothing if a higher-priority exception is already in progress.
 	 * If a lower-or-equal priority exception is in progress, preempt it
-	 * and notify the main thread by sending it a signal. */
+	 * and notify the main thread by sending it a signal.
+	 */
 	spin_lock_irqsave(&common->lock, flags);
 	if (common->state <= new_state) {
 		common->exception_req_tag = common->ep0_req_tag;
@@ -555,10 +554,10 @@ static int ep0_queue(struct fsg_common *common)
 	return rc;
 }
 
+
 /*-------------------------------------------------------------------------*/
 
-/* Bulk and interrupt endpoint completion handlers.
- * These always run in_irq. */
+/* Completion handlers. These always run in_irq. */
 
 static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
 {
@@ -567,7 +566,7 @@ static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
 
 	if (req->status || req->actual != req->length)
 		DBG(common, "%s --> %d, %u/%u\n", __func__,
-				req->status, req->actual, req->length);
+		    req->status, req->actual, req->length);
 	if (req->status == -ECONNRESET)		/* Request was cancelled */
 		usb_ep_fifo_flush(ep);
 
@@ -588,8 +587,7 @@ static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
 	dump_msg(common, "bulk-out", req->buf, req->actual);
 	if (req->status || req->actual != bh->bulk_out_intended_length)
 		DBG(common, "%s --> %d, %u/%u\n", __func__,
-				req->status, req->actual,
-				bh->bulk_out_intended_length);
+		    req->status, req->actual, bh->bulk_out_intended_length);
 	if (req->status == -ECONNRESET)		/* Request was cancelled */
 		usb_ep_fifo_flush(ep);
 
@@ -602,13 +600,8 @@ static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
 	spin_unlock(&common->lock);
 }
 
-
-/*-------------------------------------------------------------------------*/
-
-/* Ep0 class-specific handlers.  These always run in_irq. */
-
 static int fsg_setup(struct usb_function *f,
-		const struct usb_ctrlrequest *ctrl)
+		     const struct usb_ctrlrequest *ctrl)
 {
 	struct fsg_dev		*fsg = fsg_from_func(f);
 	struct usb_request	*req = fsg->common->ep0req;
@@ -628,8 +621,10 @@ static int fsg_setup(struct usb_function *f,
 		if (w_index != fsg->interface_number || w_value != 0)
 			return -EDOM;
 
-		/* Raise an exception to stop the current operation
-		 * and reinitialize our state. */
+		/*
+		 * Raise an exception to stop the current operation
+		 * and reinitialize our state.
+		 */
 		DBG(fsg, "bulk reset request\n");
 		raise_exception(fsg->common, FSG_STATE_RESET);
 		return DELAYED_STATUS;
@@ -641,7 +636,7 @@ static int fsg_setup(struct usb_function *f,
 		if (w_index != fsg->interface_number || w_value != 0)
 			return -EDOM;
 		VDBG(fsg, "get max LUN\n");
-		*(u8 *) req->buf = fsg->common->nluns - 1;
+		*(u8 *)req->buf = fsg->common->nluns - 1;
 
 		/* Respond with data/status */
 		req->length = min((u16)1, w_length);
@@ -649,8 +644,7 @@ static int fsg_setup(struct usb_function *f,
 	}
 
 	VDBG(fsg,
-	     "unknown class-specific control req "
-	     "%02x.%02x v%04x i%04x l%u\n",
+	     "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n",
 	     ctrl->bRequestType, ctrl->bRequest,
 	     le16_to_cpu(ctrl->wValue), w_index, w_length);
 	return -EOPNOTSUPP;
@@ -661,11 +655,10 @@ static int fsg_setup(struct usb_function *f,
 
 /* All the following routines run in process context */
 
-
 /* Use this for bulk or interrupt transfers, not ep0 */
 static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
-		struct usb_request *req, int *pbusy,
-		enum fsg_buffer_state *state)
+			   struct usb_request *req, int *pbusy,
+			   enum fsg_buffer_state *state)
 {
 	int	rc;
 
@@ -683,25 +676,34 @@ static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
 
 		/* We can't do much more than wait for a reset */
 
-		/* Note: currently the net2280 driver fails zero-length
-		 * submissions if DMA is enabled. */
-		if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
-						req->length == 0))
+		/*
+		 * Note: currently the net2280 driver fails zero-length
+		 * submissions if DMA is enabled.
+		 */
+		if (rc != -ESHUTDOWN &&
+		    !(rc == -EOPNOTSUPP && req->length == 0))
 			WARNING(fsg, "error in submission: %s --> %d\n",
-					ep->name, rc);
+				ep->name, rc);
 	}
 }
 
-#define START_TRANSFER_OR(common, ep_name, req, pbusy, state)		\
-	if (fsg_is_set(common))						\
-		start_transfer((common)->fsg, (common)->fsg->ep_name,	\
-			       req, pbusy, state);			\
-	else
-
-#define START_TRANSFER(common, ep_name, req, pbusy, state)		\
-	START_TRANSFER_OR(common, ep_name, req, pbusy, state) (void)0
-
+static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	if (!fsg_is_set(common))
+		return false;
+	start_transfer(common->fsg, common->fsg->bulk_in,
+		       bh->inreq, &bh->inreq_busy, &bh->state);
+	return true;
+}
 
+static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	if (!fsg_is_set(common))
+		return false;
+	start_transfer(common->fsg, common->fsg->bulk_out,
+		       bh->outreq, &bh->outreq_busy, &bh->state);
+	return true;
+}
 
 static int sleep_thread(struct fsg_common *common)
 {
@@ -739,16 +741,20 @@ static int do_read(struct fsg_common *common)
 	unsigned int		partial_page;
 	ssize_t			nread;
 
-	/* Get the starting Logical Block Address and check that it's
-	 * not too big */
+	/*
+	 * Get the starting Logical Block Address and check that it's
+	 * not too big.
+	 */
 	if (common->cmnd[0] == READ_6)
 		lba = get_unaligned_be24(&common->cmnd[1]);
 	else {
 		lba = get_unaligned_be32(&common->cmnd[2]);
 
-		/* We allow DPO (Disable Page Out = don't save data in the
+		/*
+		 * We allow DPO (Disable Page Out = don't save data in the
 		 * cache) and FUA (Force Unit Access = don't read from the
-		 * cache), but we don't implement them. */
+		 * cache), but we don't implement them.
+		 */
 		if ((common->cmnd[1] & ~0x18) != 0) {
 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
 			return -EINVAL;
@@ -766,22 +772,23 @@ static int do_read(struct fsg_common *common)
 		return -EIO;		/* No default reply */
 
 	for (;;) {
-
-		/* Figure out how much we need to read:
+		/*
+		 * Figure out how much we need to read:
 		 * Try to read the remaining amount.
 		 * But don't read more than the buffer size.
 		 * And don't try to read past the end of the file.
 		 * Finally, if we're not at a page boundary, don't read past
 		 *	the next page.
 		 * If this means reading 0 then we were asked to read past
-		 *	the end of file. */
+		 *	the end of file.
+		 */
 		amount = min(amount_left, FSG_BUFLEN);
-		amount = min((loff_t) amount,
-				curlun->file_length - file_offset);
+		amount = min((loff_t)amount,
+			     curlun->file_length - file_offset);
 		partial_page = file_offset & (PAGE_CACHE_SIZE - 1);
 		if (partial_page > 0)
-			amount = min(amount, (unsigned int) PAGE_CACHE_SIZE -
-					partial_page);
+			amount = min(amount, (unsigned int)PAGE_CACHE_SIZE -
+					     partial_page);
 
 		/* Wait for the next buffer to become available */
 		bh = common->next_buffhd_to_fill;
@@ -791,8 +798,10 @@ static int do_read(struct fsg_common *common)
 				return rc;
 		}
 
-		/* If we were asked to read past the end of file,
-		 * end with an empty buffer. */
+		/*
+		 * If we were asked to read past the end of file,
+		 * end with an empty buffer.
+		 */
 		if (amount == 0) {
 			curlun->sense_data =
 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
@@ -806,21 +815,19 @@ static int do_read(struct fsg_common *common)
 		/* Perform the read */
 		file_offset_tmp = file_offset;
 		nread = vfs_read(curlun->filp,
-				(char __user *) bh->buf,
-				amount, &file_offset_tmp);
+				 (char __user *)bh->buf,
+				 amount, &file_offset_tmp);
 		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
-				(unsigned long long) file_offset,
-				(int) nread);
+		      (unsigned long long)file_offset, (int)nread);
 		if (signal_pending(current))
 			return -EINTR;
 
 		if (nread < 0) {
-			LDBG(curlun, "error in file read: %d\n",
-					(int) nread);
+			LDBG(curlun, "error in file read: %d\n", (int)nread);
 			nread = 0;
 		} else if (nread < amount) {
 			LDBG(curlun, "partial file read: %d/%u\n",
-					(int) nread, amount);
+			     (int)nread, amount);
 			nread -= (nread & 511);	/* Round down to a block */
 		}
 		file_offset  += nread;
@@ -842,10 +849,8 @@ static int do_read(struct fsg_common *common)
 
 		/* Send this buffer and go read some more */
 		bh->inreq->zero = 0;
-		START_TRANSFER_OR(common, bulk_in, bh->inreq,
-			       &bh->inreq_busy, &bh->state)
-			/* Don't know what to do if
-			 * common->fsg is NULL */
+		if (!start_in_transfer(common, bh))
+			/* Don't know what to do if common->fsg is NULL */
 			return -EIO;
 		common->next_buffhd_to_fill = bh->next;
 	}
@@ -877,17 +882,21 @@ static int do_write(struct fsg_common *common)
 	curlun->filp->f_flags &= ~O_SYNC;	/* Default is not to wait */
 	spin_unlock(&curlun->filp->f_lock);
 
-	/* Get the starting Logical Block Address and check that it's
-	 * not too big */
+	/*
+	 * Get the starting Logical Block Address and check that it's
+	 * not too big
+	 */
 	if (common->cmnd[0] == WRITE_6)
 		lba = get_unaligned_be24(&common->cmnd[1]);
 	else {
 		lba = get_unaligned_be32(&common->cmnd[2]);
 
-		/* We allow DPO (Disable Page Out = don't save data in the
+		/*
+		 * We allow DPO (Disable Page Out = don't save data in the
 		 * cache) and FUA (Force Unit Access = write directly to the
 		 * medium).  We don't implement DPO; we implement FUA by
-		 * performing synchronous output. */
+		 * performing synchronous output.
+		 */
 		if (common->cmnd[1] & ~0x18) {
 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
 			return -EINVAL;
@@ -915,7 +924,8 @@ static int do_write(struct fsg_common *common)
 		bh = common->next_buffhd_to_fill;
 		if (bh->state == BUF_STATE_EMPTY && get_some_more) {
 
-			/* Figure out how much we want to get:
+			/*
+			 * Figure out how much we want to get:
 			 * Try to get the remaining amount.
 			 * But don't get more than the buffer size.
 			 * And don't try to go past the end of the file.
@@ -923,14 +933,15 @@ static int do_write(struct fsg_common *common)
 			 *	don't go past the next page.
 			 * If this means getting 0, then we were asked
 			 *	to write past the end of file.
-			 * Finally, round down to a block boundary. */
+			 * Finally, round down to a block boundary.
+			 */
 			amount = min(amount_left_to_req, FSG_BUFLEN);
-			amount = min((loff_t) amount, curlun->file_length -
-					usb_offset);
+			amount = min((loff_t)amount,
+				     curlun->file_length - usb_offset);
 			partial_page = usb_offset & (PAGE_CACHE_SIZE - 1);
 			if (partial_page > 0)
 				amount = min(amount,
-	(unsigned int) PAGE_CACHE_SIZE - partial_page);
+	(unsigned int)PAGE_CACHE_SIZE - partial_page);
 
 			if (amount == 0) {
 				get_some_more = 0;
@@ -940,11 +951,13 @@ static int do_write(struct fsg_common *common)
 				curlun->info_valid = 1;
 				continue;
 			}
-			amount -= (amount & 511);
+			amount -= amount & 511;
 			if (amount == 0) {
 
-				/* Why were we were asked to transfer a
-				 * partial block? */
+				/*
+				 * Why were we were asked to transfer a
+				 * partial block?
+				 */
 				get_some_more = 0;
 				continue;
 			}
@@ -956,15 +969,15 @@ static int do_write(struct fsg_common *common)
 			if (amount_left_to_req == 0)
 				get_some_more = 0;
 
-			/* amount is always divisible by 512, hence by
-			 * the bulk-out maxpacket size */
+			/*
+			 * amount is always divisible by 512, hence by
+			 * the bulk-out maxpacket size
+			 */
 			bh->outreq->length = amount;
 			bh->bulk_out_intended_length = amount;
 			bh->outreq->short_not_ok = 1;
-			START_TRANSFER_OR(common, bulk_out, bh->outreq,
-					  &bh->outreq_busy, &bh->state)
-				/* Don't know what to do if
-				 * common->fsg is NULL */
+			if (!start_out_transfer(common, bh))
+				/* Dunno what to do if common->fsg is NULL */
 				return -EIO;
 			common->next_buffhd_to_fill = bh->next;
 			continue;
@@ -990,30 +1003,29 @@ static int do_write(struct fsg_common *common)
 			amount = bh->outreq->actual;
 			if (curlun->file_length - file_offset < amount) {
 				LERROR(curlun,
-	"write %u @ %llu beyond end %llu\n",
-	amount, (unsigned long long) file_offset,
-	(unsigned long long) curlun->file_length);
+				       "write %u @ %llu beyond end %llu\n",
+				       amount, (unsigned long long)file_offset,
+				       (unsigned long long)curlun->file_length);
 				amount = curlun->file_length - file_offset;
 			}
 
 			/* Perform the write */
 			file_offset_tmp = file_offset;
 			nwritten = vfs_write(curlun->filp,
-					(char __user *) bh->buf,
-					amount, &file_offset_tmp);
+					     (char __user *)bh->buf,
+					     amount, &file_offset_tmp);
 			VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
-					(unsigned long long) file_offset,
-					(int) nwritten);
+			      (unsigned long long)file_offset, (int)nwritten);
 			if (signal_pending(current))
 				return -EINTR;		/* Interrupted! */
 
 			if (nwritten < 0) {
 				LDBG(curlun, "error in file write: %d\n",
-						(int) nwritten);
+				     (int)nwritten);
 				nwritten = 0;
 			} else if (nwritten < amount) {
 				LDBG(curlun, "partial file write: %d/%u\n",
-						(int) nwritten, amount);
+				     (int)nwritten, amount);
 				nwritten -= (nwritten & 511);
 				/* Round down to a block */
 			}
@@ -1086,16 +1098,20 @@ static int do_verify(struct fsg_common *common)
 	unsigned int		amount;
 	ssize_t			nread;
 
-	/* Get the starting Logical Block Address and check that it's
-	 * not too big */
+	/*
+	 * Get the starting Logical Block Address and check that it's
+	 * not too big.
+	 */
 	lba = get_unaligned_be32(&common->cmnd[2]);
 	if (lba >= curlun->num_sectors) {
 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
 		return -EINVAL;
 	}
 
-	/* We allow DPO (Disable Page Out = don't save data in the
-	 * cache) but we don't implement it. */
+	/*
+	 * We allow DPO (Disable Page Out = don't save data in the
+	 * cache) but we don't implement it.
+	 */
 	if (common->cmnd[1] & ~0x10) {
 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
 		return -EINVAL;
@@ -1120,16 +1136,17 @@ static int do_verify(struct fsg_common *common)
 
 	/* Just try to read the requested blocks */
 	while (amount_left > 0) {
-
-		/* Figure out how much we need to read:
+		/*
+		 * Figure out how much we need to read:
 		 * Try to read the remaining amount, but not more than
 		 * the buffer size.
 		 * And don't try to read past the end of the file.
 		 * If this means reading 0 then we were asked to read
-		 * past the end of file. */
+		 * past the end of file.
+		 */
 		amount = min(amount_left, FSG_BUFLEN);
-		amount = min((loff_t) amount,
-				curlun->file_length - file_offset);
+		amount = min((loff_t)amount,
+			     curlun->file_length - file_offset);
 		if (amount == 0) {
 			curlun->sense_data =
 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
@@ -1150,13 +1167,12 @@ static int do_verify(struct fsg_common *common)
 			return -EINTR;
 
 		if (nread < 0) {
-			LDBG(curlun, "error in file verify: %d\n",
-					(int) nread);
+			LDBG(curlun, "error in file verify: %d\n", (int)nread);
 			nread = 0;
 		} else if (nread < amount) {
 			LDBG(curlun, "partial file verify: %d/%u\n",
-					(int) nread, amount);
-			nread -= (nread & 511);	/* Round down to a sector */
+			     (int)nread, amount);
+			nread -= nread & 511;	/* Round down to a sector */
 		}
 		if (nread == 0) {
 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
@@ -1198,7 +1214,6 @@ static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh)
 	return 36;
 }
 
-
 static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh)
 {
 	struct fsg_lun	*curlun = common->curlun;
@@ -1252,13 +1267,12 @@ static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh)
 	return 18;
 }
 
-
 static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
 {
 	struct fsg_lun	*curlun = common->curlun;
 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
 	int		pmi = common->cmnd[8];
-	u8		*buf = (u8 *) bh->buf;
+	u8		*buf = (u8 *)bh->buf;
 
 	/* Check the PMI and LBA fields */
 	if (pmi > 1 || (pmi == 0 && lba != 0)) {
@@ -1272,13 +1286,12 @@ static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
 	return 8;
 }
 
-
 static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh)
 {
 	struct fsg_lun	*curlun = common->curlun;
 	int		msf = common->cmnd[1] & 0x02;
 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
-	u8		*buf = (u8 *) bh->buf;
+	u8		*buf = (u8 *)bh->buf;
 
 	if (common->cmnd[1] & ~0x02) {		/* Mask away MSF */
 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
@@ -1295,13 +1308,12 @@ static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh)
 	return 8;
 }
 
-
 static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh)
 {
 	struct fsg_lun	*curlun = common->curlun;
 	int		msf = common->cmnd[1] & 0x02;
 	int		start_track = common->cmnd[6];
-	u8		*buf = (u8 *) bh->buf;
+	u8		*buf = (u8 *)bh->buf;
 
 	if ((common->cmnd[1] & ~0x02) != 0 ||	/* Mask away MSF */
 			start_track > 1) {
@@ -1323,7 +1335,6 @@ static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh)
 	return 20;
 }
 
-
 static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
 {
 	struct fsg_lun	*curlun = common->curlun;
@@ -1348,10 +1359,12 @@ static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
 	changeable_values = (pc == 1);
 	all_pages = (page_code == 0x3f);
 
-	/* Write the mode parameter header.  Fixed values are: default
+	/*
+	 * Write the mode parameter header.  Fixed values are: default
 	 * medium type, no cache control (DPOFUA), and no block descriptors.
 	 * The only variable value is the WriteProtect bit.  We will fill in
-	 * the mode data length later. */
+	 * the mode data length later.
+	 */
 	memset(buf, 0, 8);
 	if (mscmnd == MODE_SENSE) {
 		buf[2] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
@@ -1365,8 +1378,10 @@ static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
 
 	/* No block descriptors */
 
-	/* The mode pages, in numerical order.  The only page we support
-	 * is the Caching page. */
+	/*
+	 * The mode pages, in numerical order.  The only page we support
+	 * is the Caching page.
+	 */
 	if (page_code == 0x08 || all_pages) {
 		valid_page = 1;
 		buf[0] = 0x08;		/* Page code */
@@ -1388,8 +1403,10 @@ static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
 		buf += 12;
 	}
 
-	/* Check that a valid page was requested and the mode data length
-	 * isn't too long. */
+	/*
+	 * Check that a valid page was requested and the mode data length
+	 * isn't too long.
+	 */
 	len = buf - buf0;
 	if (!valid_page || len > limit) {
 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
@@ -1404,7 +1421,6 @@ static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
 	return len;
 }
 
-
 static int do_start_stop(struct fsg_common *common)
 {
 	struct fsg_lun	*curlun = common->curlun;
@@ -1424,8 +1440,10 @@ static int do_start_stop(struct fsg_common *common)
 	loej  = common->cmnd[4] & 0x02;
 	start = common->cmnd[4] & 0x01;
 
-	/* Our emulation doesn't support mounting; the medium is
-	 * available for use as soon as it is loaded. */
+	/*
+	 * Our emulation doesn't support mounting; the medium is
+	 * available for use as soon as it is loaded.
+	 */
 	if (start) {
 		if (!fsg_lun_is_open(curlun)) {
 			curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
@@ -1466,7 +1484,6 @@ static int do_start_stop(struct fsg_common *common)
 		: 0;
 }
 
-
 static int do_prevent_allow(struct fsg_common *common)
 {
 	struct fsg_lun	*curlun = common->curlun;
@@ -1491,7 +1508,6 @@ static int do_prevent_allow(struct fsg_common *common)
 	return 0;
 }
 
-
 static int do_read_format_capacities(struct fsg_common *common,
 			struct fsg_buffhd *bh)
 {
@@ -1509,7 +1525,6 @@ static int do_read_format_capacities(struct fsg_common *common,
 	return 12;
 }
 
-
 static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh)
 {
 	struct fsg_lun	*curlun = common->curlun;
@@ -1591,7 +1606,7 @@ static int pad_with_zeros(struct fsg_dev *fsg)
 		bh->inreq->length = nsend;
 		bh->inreq->zero = 0;
 		start_transfer(fsg, fsg->bulk_in, bh->inreq,
-				&bh->inreq_busy, &bh->state);
+			       &bh->inreq_busy, &bh->state);
 		bh = fsg->common->next_buffhd_to_fill = bh->next;
 		fsg->common->usb_amount_left -= nsend;
 		nkeep = 0;
@@ -1617,7 +1632,7 @@ static int throw_away_data(struct fsg_common *common)
 
 			/* A short packet or an error ends everything */
 			if (bh->outreq->actual != bh->outreq->length ||
-					bh->outreq->status != 0) {
+			    bh->outreq->status != 0) {
 				raise_exception(common,
 						FSG_STATE_ABORT_BULK_OUT);
 				return -EINTR;
@@ -1631,15 +1646,15 @@ static int throw_away_data(struct fsg_common *common)
 		 && common->usb_amount_left > 0) {
 			amount = min(common->usb_amount_left, FSG_BUFLEN);
 
-			/* amount is always divisible by 512, hence by
-			 * the bulk-out maxpacket size */
+			/*
+			 * amount is always divisible by 512, hence by
+			 * the bulk-out maxpacket size.
+			 */
 			bh->outreq->length = amount;
 			bh->bulk_out_intended_length = amount;
 			bh->outreq->short_not_ok = 1;
-			START_TRANSFER_OR(common, bulk_out, bh->outreq,
-					  &bh->outreq_busy, &bh->state)
-				/* Don't know what to do if
-				 * common->fsg is NULL */
+			if (!start_out_transfer(common, bh))
+				/* Dunno what to do if common->fsg is NULL */
 				return -EIO;
 			common->next_buffhd_to_fill = bh->next;
 			common->usb_amount_left -= amount;
@@ -1654,7 +1669,6 @@ static int throw_away_data(struct fsg_common *common)
 	return 0;
 }
 
-
 static int finish_reply(struct fsg_common *common)
 {
 	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
@@ -1664,10 +1678,12 @@ static int finish_reply(struct fsg_common *common)
 	case DATA_DIR_NONE:
 		break;			/* Nothing to send */
 
-	/* If we don't know whether the host wants to read or write,
+	/*
+	 * If we don't know whether the host wants to read or write,
 	 * this must be CB or CBI with an unknown command.  We mustn't
 	 * try to send or receive any data.  So stall both bulk pipes
-	 * if we can and wait for a reset. */
+	 * if we can and wait for a reset.
+	 */
 	case DATA_DIR_UNKNOWN:
 		if (!common->can_stall) {
 			/* Nothing */
@@ -1688,18 +1704,18 @@ static int finish_reply(struct fsg_common *common)
 		/* If there's no residue, simply send the last buffer */
 		} else if (common->residue == 0) {
 			bh->inreq->zero = 0;
-			START_TRANSFER_OR(common, bulk_in, bh->inreq,
-					  &bh->inreq_busy, &bh->state)
+			if (!start_in_transfer(common, bh))
 				return -EIO;
 			common->next_buffhd_to_fill = bh->next;
 
-		/* For Bulk-only, if we're allowed to stall then send the
+		/*
+		 * For Bulk-only, if we're allowed to stall then send the
 		 * short packet and halt the bulk-in endpoint.  If we can't
-		 * stall, pad out the remaining data with 0's. */
+		 * stall, pad out the remaining data with 0's.
+		 */
 		} else if (common->can_stall) {
 			bh->inreq->zero = 1;
-			START_TRANSFER_OR(common, bulk_in, bh->inreq,
-					  &bh->inreq_busy, &bh->state)
+			if (!start_in_transfer(common, bh))
 				/* Don't know what to do if
 				 * common->fsg is NULL */
 				rc = -EIO;
@@ -1714,8 +1730,10 @@ static int finish_reply(struct fsg_common *common)
 		}
 		break;
 
-	/* We have processed all we want from the data the host has sent.
-	 * There may still be outstanding bulk-out requests. */
+	/*
+	 * We have processed all we want from the data the host has sent.
+	 * There may still be outstanding bulk-out requests.
+	 */
 	case DATA_DIR_FROM_HOST:
 		if (common->residue == 0) {
 			/* Nothing to receive */
@@ -1725,12 +1743,14 @@ static int finish_reply(struct fsg_common *common)
 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
 			rc = -EINTR;
 
-		/* We haven't processed all the incoming data.  Even though
+		/*
+		 * We haven't processed all the incoming data.  Even though
 		 * we may be allowed to stall, doing so would cause a race.
 		 * The controller may already have ACK'ed all the remaining
 		 * bulk-out packets, in which case the host wouldn't see a
 		 * STALL.  Not realizing the endpoint was halted, it wouldn't
-		 * clear the halt -- leading to problems later on. */
+		 * clear the halt -- leading to problems later on.
+		 */
 #if 0
 		} else if (common->can_stall) {
 			if (fsg_is_set(common))
@@ -1740,8 +1760,10 @@ static int finish_reply(struct fsg_common *common)
 			rc = -EINTR;
 #endif
 
-		/* We can't stall.  Read in the excess data and throw it
-		 * all away. */
+		/*
+		 * We can't stall.  Read in the excess data and throw it
+		 * all away.
+		 */
 		} else {
 			rc = throw_away_data(common);
 		}
@@ -1750,7 +1772,6 @@ static int finish_reply(struct fsg_common *common)
 	return rc;
 }
 
-
 static int send_status(struct fsg_common *common)
 {
 	struct fsg_lun		*curlun = common->curlun;
@@ -1798,8 +1819,7 @@ static int send_status(struct fsg_common *common)
 
 	bh->inreq->length = USB_BULK_CS_WRAP_LEN;
 	bh->inreq->zero = 0;
-	START_TRANSFER_OR(common, bulk_in, bh->inreq,
-			  &bh->inreq_busy, &bh->state)
+	if (!start_in_transfer(common, bh))
 		/* Don't know what to do if common->fsg is NULL */
 		return -EIO;
 
@@ -1810,11 +1830,13 @@ static int send_status(struct fsg_common *common)
 
 /*-------------------------------------------------------------------------*/
 
-/* Check whether the command is properly formed and whether its data size
- * and direction agree with the values we already have. */
+/*
+ * Check whether the command is properly formed and whether its data size
+ * and direction agree with the values we already have.
+ */
 static int check_command(struct fsg_common *common, int cmnd_size,
-		enum data_direction data_dir, unsigned int mask,
-		int needs_medium, const char *name)
+			 enum data_direction data_dir, unsigned int mask,
+			 int needs_medium, const char *name)
 {
 	int			i;
 	int			lun = common->cmnd[1] >> 5;
@@ -1825,19 +1847,23 @@ static int check_command(struct fsg_common *common, int cmnd_size,
 	hdlen[0] = 0;
 	if (common->data_dir != DATA_DIR_UNKNOWN)
 		sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir],
-				common->data_size);
+			common->data_size);
 	VDBG(common, "SCSI command: %s;  Dc=%d, D%c=%u;  Hc=%d%s\n",
 	     name, cmnd_size, dirletter[(int) data_dir],
 	     common->data_size_from_cmnd, common->cmnd_size, hdlen);
 
-	/* We can't reply at all until we know the correct data direction
-	 * and size. */
+	/*
+	 * We can't reply at all until we know the correct data direction
+	 * and size.
+	 */
 	if (common->data_size_from_cmnd == 0)
 		data_dir = DATA_DIR_NONE;
 	if (common->data_size < common->data_size_from_cmnd) {
-		/* Host data size < Device data size is a phase error.
+		/*
+		 * Host data size < Device data size is a phase error.
 		 * Carry out the command, but only transfer as much as
-		 * we are allowed. */
+		 * we are allowed.
+		 */
 		common->data_size_from_cmnd = common->data_size;
 		common->phase_error = 1;
 	}
@@ -1845,8 +1871,7 @@ static int check_command(struct fsg_common *common, int cmnd_size,
 	common->usb_amount_left = common->data_size;
 
 	/* Conflicting data directions is a phase error */
-	if (common->data_dir != data_dir
-	 && common->data_size_from_cmnd > 0) {
+	if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) {
 		common->phase_error = 1;
 		return -EINVAL;
 	}
@@ -1854,7 +1879,8 @@ static int check_command(struct fsg_common *common, int cmnd_size,
 	/* Verify the length of the command itself */
 	if (cmnd_size != common->cmnd_size) {
 
-		/* Special case workaround: There are plenty of buggy SCSI
+		/*
+		 * Special case workaround: There are plenty of buggy SCSI
 		 * implementations. Many have issues with cbw->Length
 		 * field passing a wrong command size. For those cases we
 		 * always try to work around the problem by using the length
@@ -1896,8 +1922,10 @@ static int check_command(struct fsg_common *common, int cmnd_size,
 		curlun = NULL;
 		common->bad_lun_okay = 0;
 
-		/* INQUIRY and REQUEST SENSE commands are explicitly allowed
-		 * to use unsupported LUNs; all others may not. */
+		/*
+		 * INQUIRY and REQUEST SENSE commands are explicitly allowed
+		 * to use unsupported LUNs; all others may not.
+		 */
 		if (common->cmnd[0] != INQUIRY &&
 		    common->cmnd[0] != REQUEST_SENSE) {
 			DBG(common, "unsupported LUN %d\n", common->lun);
@@ -1905,11 +1933,13 @@ static int check_command(struct fsg_common *common, int cmnd_size,
 		}
 	}
 
-	/* If a unit attention condition exists, only INQUIRY and
-	 * REQUEST SENSE commands are allowed; anything else must fail. */
+	/*
+	 * If a unit attention condition exists, only INQUIRY and
+	 * REQUEST SENSE commands are allowed; anything else must fail.
+	 */
 	if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
-			common->cmnd[0] != INQUIRY &&
-			common->cmnd[0] != REQUEST_SENSE) {
+	    common->cmnd[0] != INQUIRY &&
+	    common->cmnd[0] != REQUEST_SENSE) {
 		curlun->sense_data = curlun->unit_attention_data;
 		curlun->unit_attention_data = SS_NO_SENSE;
 		return -EINVAL;
@@ -1935,7 +1965,6 @@ static int check_command(struct fsg_common *common, int cmnd_size,
 	return 0;
 }
 
-
 static int do_scsi_command(struct fsg_common *common)
 {
 	struct fsg_buffhd	*bh;
@@ -2123,8 +2152,10 @@ static int do_scsi_command(struct fsg_common *common)
 				"TEST UNIT READY");
 		break;
 
-	/* Although optional, this command is used by MS-Windows.  We
-	 * support a minimal version: BytChk must be 0. */
+	/*
+	 * Although optional, this command is used by MS-Windows.  We
+	 * support a minimal version: BytChk must be 0.
+	 */
 	case VERIFY:
 		common->data_size_from_cmnd = 0;
 		reply = check_command(common, 10, DATA_DIR_NONE,
@@ -2164,10 +2195,12 @@ static int do_scsi_command(struct fsg_common *common)
 			reply = do_write(common);
 		break;
 
-	/* Some mandatory commands that we recognize but don't implement.
+	/*
+	 * Some mandatory commands that we recognize but don't implement.
 	 * They don't mean much in this setting.  It's left as an exercise
 	 * for anyone interested to implement RESERVE and RELEASE in terms
-	 * of Posix locks. */
+	 * of Posix locks.
+	 */
 	case FORMAT_UNIT:
 	case RELEASE:
 	case RESERVE:
@@ -2195,7 +2228,7 @@ unknown_cmnd:
 	if (reply == -EINVAL)
 		reply = 0;		/* Error reply length */
 	if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) {
-		reply = min((u32) reply, common->data_size_from_cmnd);
+		reply = min((u32)reply, common->data_size_from_cmnd);
 		bh->inreq->length = reply;
 		bh->state = BUF_STATE_FULL;
 		common->residue -= reply;
@@ -2225,7 +2258,8 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 				req->actual,
 				le32_to_cpu(cbw->Signature));
 
-		/* The Bulk-only spec says we MUST stall the IN endpoint
+		/*
+		 * The Bulk-only spec says we MUST stall the IN endpoint
 		 * (6.6.1), so it's unavoidable.  It also says we must
 		 * retain this state until the next reset, but there's
 		 * no way to tell the controller driver it should ignore
@@ -2233,7 +2267,8 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 		 *
 		 * We aren't required to halt the OUT endpoint; instead
 		 * we can simply accept and discard any data received
-		 * until the next reset. */
+		 * until the next reset.
+		 */
 		wedge_bulk_in_endpoint(fsg);
 		set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
 		return -EINVAL;
@@ -2246,8 +2281,10 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 				"cmdlen %u\n",
 				cbw->Lun, cbw->Flags, cbw->Length);
 
-		/* We can do anything we want here, so let's stall the
-		 * bulk pipes if we are allowed to. */
+		/*
+		 * We can do anything we want here, so let's stall the
+		 * bulk pipes if we are allowed to.
+		 */
 		if (common->can_stall) {
 			fsg_set_halt(fsg, fsg->bulk_out);
 			halt_bulk_in_endpoint(fsg);
@@ -2270,7 +2307,6 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 	return 0;
 }
 
-
 static int get_next_command(struct fsg_common *common)
 {
 	struct fsg_buffhd	*bh;
@@ -2287,14 +2323,15 @@ static int get_next_command(struct fsg_common *common)
 	/* Queue a request to read a Bulk-only CBW */
 	set_bulk_out_req_length(common, bh, USB_BULK_CB_WRAP_LEN);
 	bh->outreq->short_not_ok = 1;
-	START_TRANSFER_OR(common, bulk_out, bh->outreq,
-			  &bh->outreq_busy, &bh->state)
+	if (!start_out_transfer(common, bh))
 		/* Don't know what to do if common->fsg is NULL */
 		return -EIO;
 
-	/* We will drain the buffer in software, which means we
+	/*
+	 * We will drain the buffer in software, which means we
 	 * can reuse it for the next filling.  No need to advance
-	 * next_buffhd_to_fill. */
+	 * next_buffhd_to_fill.
+	 */
 
 	/* Wait for the CBW to arrive */
 	while (bh->state != BUF_STATE_FULL) {
@@ -2425,7 +2462,6 @@ reset:
 
 /****************************** ALT CONFIGS ******************************/
 
-
 static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 {
 	struct fsg_dev *fsg = fsg_from_func(f);
@@ -2453,8 +2489,10 @@ static void handle_exception(struct fsg_common *common)
 	struct fsg_lun		*curlun;
 	unsigned int		exception_req_tag;
 
-	/* Clear the existing signals.  Anything but SIGUSR1 is converted
-	 * into a high-priority EXIT exception. */
+	/*
+	 * Clear the existing signals.  Anything but SIGUSR1 is converted
+	 * into a high-priority EXIT exception.
+	 */
 	for (;;) {
 		int sig =
 			dequeue_signal_lock(current, &current->blocked, &info);
@@ -2498,8 +2536,10 @@ static void handle_exception(struct fsg_common *common)
 			usb_ep_fifo_flush(common->fsg->bulk_out);
 	}
 
-	/* Reset the I/O buffer states and pointers, the SCSI
-	 * state, and the exception.  Then invoke the handler. */
+	/*
+	 * Reset the I/O buffer states and pointers, the SCSI
+	 * state, and the exception.  Then invoke the handler.
+	 */
 	spin_lock_irq(&common->lock);
 
 	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
@@ -2537,9 +2577,11 @@ static void handle_exception(struct fsg_common *common)
 		break;
 
 	case FSG_STATE_RESET:
-		/* In case we were forced against our will to halt a
+		/*
+		 * In case we were forced against our will to halt a
 		 * bulk endpoint, clear the halt now.  (The SuperH UDC
-		 * requires this.) */
+		 * requires this.)
+		 */
 		if (!fsg_is_set(common))
 			break;
 		if (test_and_clear_bit(IGNORE_BULK_OUT,
@@ -2549,9 +2591,11 @@ static void handle_exception(struct fsg_common *common)
 		if (common->ep0_req_tag == exception_req_tag)
 			ep0_queue(common);	/* Complete the status stage */
 
-		/* Technically this should go here, but it would only be
+		/*
+		 * Technically this should go here, but it would only be
 		 * a waste of time.  Ditto for the INTERFACE_CHANGE and
-		 * CONFIG_CHANGE cases. */
+		 * CONFIG_CHANGE cases.
+		 */
 		/* for (i = 0; i < common->nluns; ++i) */
 		/*	common->luns[i].unit_attention_data = */
 		/*		SS_RESET_OCCURRED;  */
@@ -2586,8 +2630,10 @@ static int fsg_main_thread(void *common_)
 {
 	struct fsg_common	*common = common_;
 
-	/* Allow the thread to be killed by a signal, but set the signal mask
-	 * to block everything but INT, TERM, KILL, and USR1. */
+	/*
+	 * Allow the thread to be killed by a signal, but set the signal mask
+	 * to block everything but INT, TERM, KILL, and USR1.
+	 */
 	allow_signal(SIGINT);
 	allow_signal(SIGTERM);
 	allow_signal(SIGKILL);
@@ -2596,9 +2642,11 @@ static int fsg_main_thread(void *common_)
 	/* Allow the thread to be frozen */
 	set_freezable();
 
-	/* Arrange for userspace references to be interpreted as kernel
+	/*
+	 * Arrange for userspace references to be interpreted as kernel
 	 * pointers.  That way we can pass a kernel pointer to a routine
-	 * that expects a __user pointer and it will work okay. */
+	 * that expects a __user pointer and it will work okay.
+	 */
 	set_fs(get_ds());
 
 	/* The main loop */
@@ -2658,7 +2706,7 @@ static int fsg_main_thread(void *common_)
 		up_write(&common->filesem);
 	}
 
-	/* Let the unbind and cleanup routines know the thread has exited */
+	/* Let fsg_unbind() know the thread has exited */
 	complete_and_exit(&common->thread_notifier, 0);
 }
 
@@ -2690,7 +2738,6 @@ static inline void fsg_common_put(struct fsg_common *common)
 	kref_put(&common->ref, fsg_common_release);
 }
 
-
 static struct fsg_common *fsg_common_init(struct fsg_common *common,
 					  struct usb_composite_dev *cdev,
 					  struct fsg_config *cfg)
@@ -2736,8 +2783,10 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 		fsg_intf_desc.iInterface = rc;
 	}
 
-	/* Create the LUNs, open their backing files, and register the
-	 * LUN devices in sysfs. */
+	/*
+	 * Create the LUNs, open their backing files, and register the
+	 * LUN devices in sysfs.
+	 */
 	curlun = kzalloc(nluns * sizeof *curlun, GFP_KERNEL);
 	if (unlikely(!curlun)) {
 		rc = -ENOMEM;
@@ -2765,6 +2814,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 		if (rc) {
 			INFO(common, "failed to register LUN%d: %d\n", i, rc);
 			common->nluns = i;
+			put_device(&curlun->dev);
 			goto error_release;
 		}
 
@@ -2790,7 +2840,6 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 	}
 	common->nluns = nluns;
 
-
 	/* Data buffers cyclic list */
 	bh = common->buffhds;
 	i = FSG_NUM_BUFFERS;
@@ -2807,7 +2856,6 @@ buffhds_first_it:
 	} while (--i);
 	bh->next = common->buffhds;
 
-
 	/* Prepare inquiryString */
 	if (cfg->release != 0xffff) {
 		i = cfg->release;
@@ -2821,41 +2869,35 @@ buffhds_first_it:
 			i = 0x0399;
 		}
 	}
-#define OR(x, y) ((x) ? (x) : (y))
 	snprintf(common->inquiry_string, sizeof common->inquiry_string,
-		 "%-8s%-16s%04x",
-		 OR(cfg->vendor_name, "Linux   "),
+		 "%-8s%-16s%04x", cfg->vendor_name ?: "Linux",
 		 /* Assume product name dependent on the first LUN */
-		 OR(cfg->product_name, common->luns->cdrom
+		 cfg->product_name ?: (common->luns->cdrom
 				     ? "File-Stor Gadget"
-				     : "File-CD Gadget  "),
+				     : "File-CD Gadget"),
 		 i);
 
-
-	/* Some peripheral controllers are known not to be able to
+	/*
+	 * Some peripheral controllers are known not to be able to
 	 * halt bulk endpoints correctly.  If one of them is present,
 	 * disable stalls.
 	 */
 	common->can_stall = cfg->can_stall &&
 		!(gadget_is_at91(common->gadget));
 
-
 	spin_lock_init(&common->lock);
 	kref_init(&common->ref);
 
-
 	/* Tell the thread to start working */
 	common->thread_task =
 		kthread_create(fsg_main_thread, common,
-			       OR(cfg->thread_name, "file-storage"));
+			       cfg->thread_name ?: "file-storage");
 	if (IS_ERR(common->thread_task)) {
 		rc = PTR_ERR(common->thread_task);
 		goto error_release;
 	}
 	init_completion(&common->thread_notifier);
 	init_waitqueue_head(&common->fsg_wait);
-#undef OR
-
 
 	/* Information */
 	INFO(common, FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n");
@@ -2889,18 +2931,15 @@ buffhds_first_it:
 
 	return common;
 
-
 error_luns:
 	common->nluns = i + 1;
 error_release:
 	common->state = FSG_STATE_TERMINATED;	/* The thread is dead */
-	/* Call fsg_common_release() directly, ref might be not
-	 * initialised */
+	/* Call fsg_common_release() directly, ref might be not initialised. */
 	fsg_common_release(&common->ref);
 	return ERR_PTR(rc);
 }
 
-
 static void fsg_common_release(struct kref *ref)
 {
 	struct fsg_common *common = container_of(ref, struct fsg_common, ref);
@@ -2909,9 +2948,6 @@ static void fsg_common_release(struct kref *ref)
 	if (common->state != FSG_STATE_TERMINATED) {
 		raise_exception(common, FSG_STATE_EXIT);
 		wait_for_completion(&common->thread_notifier);
-
-		/* The cleanup routine waits for this completion also */
-		complete(&common->thread_notifier);
 	}
 
 	if (likely(common->luns)) {
@@ -2945,7 +2981,6 @@ static void fsg_common_release(struct kref *ref)
 
 /*-------------------------------------------------------------------------*/
 
-
 static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct fsg_dev		*fsg = fsg_from_func(f);
@@ -2965,7 +3000,6 @@ static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
 	kfree(fsg);
 }
 
-
 static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct fsg_dev		*fsg = fsg_from_func(f);
@@ -3048,11 +3082,13 @@ static int fsg_bind_config(struct usb_composite_dev *cdev,
 	fsg->function.disable     = fsg_disable;
 
 	fsg->common               = common;
-	/* Our caller holds a reference to common structure so we
+	/*
+	 * Our caller holds a reference to common structure so we
 	 * don't have to be worry about it being freed until we return
 	 * from this function.  So instead of incrementing counter now
 	 * and decrement in error recovery we increment it only when
-	 * call to usb_add_function() was successful. */
+	 * call to usb_add_function() was successful.
+	 */
 
 	rc = usb_add_function(c, &fsg->function);
 	if (unlikely(rc))
@@ -3063,8 +3099,7 @@ static int fsg_bind_config(struct usb_composite_dev *cdev,
 }
 
 static inline int __deprecated __maybe_unused
-fsg_add(struct usb_composite_dev *cdev,
-	struct usb_configuration *c,
+fsg_add(struct usb_composite_dev *cdev, struct usb_configuration *c,
 	struct fsg_common *common)
 {
 	return fsg_bind_config(cdev, c, common);
@@ -3073,7 +3108,6 @@ fsg_add(struct usb_composite_dev *cdev,
 
 /************************* Module parameters *************************/
 
-
 struct fsg_module_parameters {
 	char		*file[FSG_MAX_LUNS];
 	int		ro[FSG_MAX_LUNS];
@@ -3087,7 +3121,6 @@ struct fsg_module_parameters {
 	int		stall;	/* can_stall */
 };
 
-
 #define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc)	\
 	module_param_array_named(prefix ## name, params.name, type,	\
 				 &prefix ## params.name ## _count,	\
@@ -3115,7 +3148,6 @@ struct fsg_module_parameters {
 	_FSG_MODULE_PARAM(prefix, params, stall, bool,			\
 			  "false to prevent bulk stalls")
 
-
 static void
 fsg_config_from_params(struct fsg_config *cfg,
 		       const struct fsg_module_parameters *params)
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
new file mode 100644
index 00000000000..130eee678c8
--- /dev/null
+++ b/drivers/usb/gadget/f_ncm.c
@@ -0,0 +1,1407 @@
+/*
+ * f_ncm.c -- USB CDC Network (NCM) link function driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Contact: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
+ *
+ * The driver borrows from f_ecm.c which is:
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/crc32.h>
+
+#include <linux/usb/cdc.h>
+
+#include "u_ether.h"
+
+/*
+ * This function is a "CDC Network Control Model" (CDC NCM) Ethernet link.
+ * NCM is intended to be used with high-speed network attachments.
+ *
+ * Note that NCM requires the use of "alternate settings" for its data
+ * interface.  This means that the set_alt() method has real work to do,
+ * and also means that a get_alt() method is required.
+ */
+
+/* to trigger crc/non-crc ndp signature */
+
+#define NCM_NDP_HDR_CRC_MASK	0x01000000
+#define NCM_NDP_HDR_CRC		0x01000000
+#define NCM_NDP_HDR_NOCRC	0x00000000
+
+struct ncm_ep_descs {
+	struct usb_endpoint_descriptor	*in;
+	struct usb_endpoint_descriptor	*out;
+	struct usb_endpoint_descriptor	*notify;
+};
+
+enum ncm_notify_state {
+	NCM_NOTIFY_NONE,		/* don't notify */
+	NCM_NOTIFY_CONNECT,		/* issue CONNECT next */
+	NCM_NOTIFY_SPEED,		/* issue SPEED_CHANGE next */
+};
+
+struct f_ncm {
+	struct gether			port;
+	u8				ctrl_id, data_id;
+
+	char				ethaddr[14];
+
+	struct ncm_ep_descs		fs;
+	struct ncm_ep_descs		hs;
+
+	struct usb_ep			*notify;
+	struct usb_endpoint_descriptor	*notify_desc;
+	struct usb_request		*notify_req;
+	u8				notify_state;
+	bool				is_open;
+
+	struct ndp_parser_opts		*parser_opts;
+	bool				is_crc;
+
+	/*
+	 * for notification, it is accessed from both
+	 * callback and ethernet open/close
+	 */
+	spinlock_t			lock;
+};
+
+static inline struct f_ncm *func_to_ncm(struct usb_function *f)
+{
+	return container_of(f, struct f_ncm, port.func);
+}
+
+/* peak (theoretical) bulk transfer rate in bits-per-second */
+static inline unsigned ncm_bitrate(struct usb_gadget *g)
+{
+	if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+		return 13 * 512 * 8 * 1000 * 8;
+	else
+		return 19 *  64 * 1 * 1000 * 8;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * We cannot group frames so use just the minimal size which ok to put
+ * one max-size ethernet frame.
+ * If the host can group frames, allow it to do that, 16K is selected,
+ * because it's used by default by the current linux host driver
+ */
+#define NTB_DEFAULT_IN_SIZE	USB_CDC_NCM_NTB_MIN_IN_SIZE
+#define NTB_OUT_SIZE		16384
+
+/*
+ * skbs of size less than that will not be alligned
+ * to NCM's dwNtbInMaxSize to save bus bandwidth
+ */
+
+#define	MAX_TX_NONFIXED		(512 * 3)
+
+#define FORMATS_SUPPORTED	(USB_CDC_NCM_NTB16_SUPPORTED |	\
+				 USB_CDC_NCM_NTB32_SUPPORTED)
+
+static struct usb_cdc_ncm_ntb_parameters ntb_parameters = {
+	.wLength = sizeof ntb_parameters,
+	.bmNtbFormatsSupported = cpu_to_le16(FORMATS_SUPPORTED),
+	.dwNtbInMaxSize = cpu_to_le32(NTB_DEFAULT_IN_SIZE),
+	.wNdpInDivisor = cpu_to_le16(4),
+	.wNdpInPayloadRemainder = cpu_to_le16(0),
+	.wNdpInAlignment = cpu_to_le16(4),
+
+	.dwNtbOutMaxSize = cpu_to_le32(NTB_OUT_SIZE),
+	.wNdpOutDivisor = cpu_to_le16(4),
+	.wNdpOutPayloadRemainder = cpu_to_le16(0),
+	.wNdpOutAlignment = cpu_to_le16(4),
+};
+
+/*
+ * Use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one
+ * packet, to simplify cancellation; and a big transfer interval, to
+ * waste less bandwidth.
+ */
+
+#define LOG2_STATUS_INTERVAL_MSEC	5	/* 1 << 5 == 32 msec */
+#define NCM_STATUS_BYTECOUNT		16	/* 8 byte header + data */
+
+static struct usb_interface_assoc_descriptor ncm_iad_desc __initdata = {
+	.bLength =		sizeof ncm_iad_desc,
+	.bDescriptorType =	USB_DT_INTERFACE_ASSOCIATION,
+
+	/* .bFirstInterface =	DYNAMIC, */
+	.bInterfaceCount =	2,	/* control + data */
+	.bFunctionClass =	USB_CLASS_COMM,
+	.bFunctionSubClass =	USB_CDC_SUBCLASS_NCM,
+	.bFunctionProtocol =	USB_CDC_PROTO_NONE,
+	/* .iFunction =		DYNAMIC */
+};
+
+/* interface descriptor: */
+
+static struct usb_interface_descriptor ncm_control_intf __initdata = {
+	.bLength =		sizeof ncm_control_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	/* .bInterfaceNumber = DYNAMIC */
+	.bNumEndpoints =	1,
+	.bInterfaceClass =	USB_CLASS_COMM,
+	.bInterfaceSubClass =	USB_CDC_SUBCLASS_NCM,
+	.bInterfaceProtocol =	USB_CDC_PROTO_NONE,
+	/* .iInterface = DYNAMIC */
+};
+
+static struct usb_cdc_header_desc ncm_header_desc __initdata = {
+	.bLength =		sizeof ncm_header_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
+
+	.bcdCDC =		cpu_to_le16(0x0110),
+};
+
+static struct usb_cdc_union_desc ncm_union_desc __initdata = {
+	.bLength =		sizeof(ncm_union_desc),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_UNION_TYPE,
+	/* .bMasterInterface0 =	DYNAMIC */
+	/* .bSlaveInterface0 =	DYNAMIC */
+};
+
+static struct usb_cdc_ether_desc ecm_desc __initdata = {
+	.bLength =		sizeof ecm_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_ETHERNET_TYPE,
+
+	/* this descriptor actually adds value, surprise! */
+	/* .iMACAddress = DYNAMIC */
+	.bmEthernetStatistics =	cpu_to_le32(0), /* no statistics */
+	.wMaxSegmentSize =	cpu_to_le16(ETH_FRAME_LEN),
+	.wNumberMCFilters =	cpu_to_le16(0),
+	.bNumberPowerFilters =	0,
+};
+
+#define NCAPS	(USB_CDC_NCM_NCAP_ETH_FILTER | USB_CDC_NCM_NCAP_CRC_MODE)
+
+static struct usb_cdc_ncm_desc ncm_desc __initdata = {
+	.bLength =		sizeof ncm_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_NCM_TYPE,
+
+	.bcdNcmVersion =	cpu_to_le16(0x0100),
+	/* can process SetEthernetPacketFilter */
+	.bmNetworkCapabilities = NCAPS,
+};
+
+/* the default data interface has no endpoints ... */
+
+static struct usb_interface_descriptor ncm_data_nop_intf __initdata = {
+	.bLength =		sizeof ncm_data_nop_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bInterfaceNumber =	1,
+	.bAlternateSetting =	0,
+	.bNumEndpoints =	0,
+	.bInterfaceClass =	USB_CLASS_CDC_DATA,
+	.bInterfaceSubClass =	0,
+	.bInterfaceProtocol =	USB_CDC_NCM_PROTO_NTB,
+	/* .iInterface = DYNAMIC */
+};
+
+/* ... but the "real" data interface has two bulk endpoints */
+
+static struct usb_interface_descriptor ncm_data_intf __initdata = {
+	.bLength =		sizeof ncm_data_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bInterfaceNumber =	1,
+	.bAlternateSetting =	1,
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_CDC_DATA,
+	.bInterfaceSubClass =	0,
+	.bInterfaceProtocol =	USB_CDC_NCM_PROTO_NTB,
+	/* .iInterface = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor fs_ncm_notify_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(NCM_STATUS_BYTECOUNT),
+	.bInterval =		1 << LOG2_STATUS_INTERVAL_MSEC,
+};
+
+static struct usb_endpoint_descriptor fs_ncm_in_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor fs_ncm_out_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *ncm_fs_function[] __initdata = {
+	(struct usb_descriptor_header *) &ncm_iad_desc,
+	/* CDC NCM control descriptors */
+	(struct usb_descriptor_header *) &ncm_control_intf,
+	(struct usb_descriptor_header *) &ncm_header_desc,
+	(struct usb_descriptor_header *) &ncm_union_desc,
+	(struct usb_descriptor_header *) &ecm_desc,
+	(struct usb_descriptor_header *) &ncm_desc,
+	(struct usb_descriptor_header *) &fs_ncm_notify_desc,
+	/* data interface, altsettings 0 and 1 */
+	(struct usb_descriptor_header *) &ncm_data_nop_intf,
+	(struct usb_descriptor_header *) &ncm_data_intf,
+	(struct usb_descriptor_header *) &fs_ncm_in_desc,
+	(struct usb_descriptor_header *) &fs_ncm_out_desc,
+	NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor hs_ncm_notify_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(NCM_STATUS_BYTECOUNT),
+	.bInterval =		LOG2_STATUS_INTERVAL_MSEC + 4,
+};
+static struct usb_endpoint_descriptor hs_ncm_in_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor hs_ncm_out_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *ncm_hs_function[] __initdata = {
+	(struct usb_descriptor_header *) &ncm_iad_desc,
+	/* CDC NCM control descriptors */
+	(struct usb_descriptor_header *) &ncm_control_intf,
+	(struct usb_descriptor_header *) &ncm_header_desc,
+	(struct usb_descriptor_header *) &ncm_union_desc,
+	(struct usb_descriptor_header *) &ecm_desc,
+	(struct usb_descriptor_header *) &ncm_desc,
+	(struct usb_descriptor_header *) &hs_ncm_notify_desc,
+	/* data interface, altsettings 0 and 1 */
+	(struct usb_descriptor_header *) &ncm_data_nop_intf,
+	(struct usb_descriptor_header *) &ncm_data_intf,
+	(struct usb_descriptor_header *) &hs_ncm_in_desc,
+	(struct usb_descriptor_header *) &hs_ncm_out_desc,
+	NULL,
+};
+
+/* string descriptors: */
+
+#define STRING_CTRL_IDX	0
+#define STRING_MAC_IDX	1
+#define STRING_DATA_IDX	2
+#define STRING_IAD_IDX	3
+
+static struct usb_string ncm_string_defs[] = {
+	[STRING_CTRL_IDX].s = "CDC Network Control Model (NCM)",
+	[STRING_MAC_IDX].s = NULL /* DYNAMIC */,
+	[STRING_DATA_IDX].s = "CDC Network Data",
+	[STRING_IAD_IDX].s = "CDC NCM",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings ncm_string_table = {
+	.language =		0x0409,	/* en-us */
+	.strings =		ncm_string_defs,
+};
+
+static struct usb_gadget_strings *ncm_strings[] = {
+	&ncm_string_table,
+	NULL,
+};
+
+/*
+ * Here are options for NCM Datagram Pointer table (NDP) parser.
+ * There are 2 different formats: NDP16 and NDP32 in the spec (ch. 3),
+ * in NDP16 offsets and sizes fields are 1 16bit word wide,
+ * in NDP32 -- 2 16bit words wide. Also signatures are different.
+ * To make the parser code the same, put the differences in the structure,
+ * and switch pointers to the structures when the format is changed.
+ */
+
+struct ndp_parser_opts {
+	u32		nth_sign;
+	u32		ndp_sign;
+	unsigned	nth_size;
+	unsigned	ndp_size;
+	unsigned	ndplen_align;
+	/* sizes in u16 units */
+	unsigned	dgram_item_len; /* index or length */
+	unsigned	block_length;
+	unsigned	fp_index;
+	unsigned	reserved1;
+	unsigned	reserved2;
+	unsigned	next_fp_index;
+};
+
+#define INIT_NDP16_OPTS {					\
+		.nth_sign = USB_CDC_NCM_NTH16_SIGN,		\
+		.ndp_sign = USB_CDC_NCM_NDP16_NOCRC_SIGN,	\
+		.nth_size = sizeof(struct usb_cdc_ncm_nth16),	\
+		.ndp_size = sizeof(struct usb_cdc_ncm_ndp16),	\
+		.ndplen_align = 4,				\
+		.dgram_item_len = 1,				\
+		.block_length = 1,				\
+		.fp_index = 1,					\
+		.reserved1 = 0,					\
+		.reserved2 = 0,					\
+		.next_fp_index = 1,				\
+	}
+
+
+#define INIT_NDP32_OPTS {					\
+		.nth_sign = USB_CDC_NCM_NTH32_SIGN,		\
+		.ndp_sign = USB_CDC_NCM_NDP32_NOCRC_SIGN,	\
+		.nth_size = sizeof(struct usb_cdc_ncm_nth32),	\
+		.ndp_size = sizeof(struct usb_cdc_ncm_ndp32),	\
+		.ndplen_align = 8,				\
+		.dgram_item_len = 2,				\
+		.block_length = 2,				\
+		.fp_index = 2,					\
+		.reserved1 = 1,					\
+		.reserved2 = 2,					\
+		.next_fp_index = 2,				\
+	}
+
+static struct ndp_parser_opts ndp16_opts = INIT_NDP16_OPTS;
+static struct ndp_parser_opts ndp32_opts = INIT_NDP32_OPTS;
+
+static inline void put_ncm(__le16 **p, unsigned size, unsigned val)
+{
+	switch (size) {
+	case 1:
+		put_unaligned_le16((u16)val, *p);
+		break;
+	case 2:
+		put_unaligned_le32((u32)val, *p);
+
+		break;
+	default:
+		BUG();
+	}
+
+	*p += size;
+}
+
+static inline unsigned get_ncm(__le16 **p, unsigned size)
+{
+	unsigned tmp;
+
+	switch (size) {
+	case 1:
+		tmp = get_unaligned_le16(*p);
+		break;
+	case 2:
+		tmp = get_unaligned_le32(*p);
+		break;
+	default:
+		BUG();
+	}
+
+	*p += size;
+	return tmp;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline void ncm_reset_values(struct f_ncm *ncm)
+{
+	ncm->parser_opts = &ndp16_opts;
+	ncm->is_crc = false;
+	ncm->port.cdc_filter = DEFAULT_FILTER;
+
+	/* doesn't make sense for ncm, fixed size used */
+	ncm->port.header_len = 0;
+
+	ncm->port.fixed_out_len = le32_to_cpu(ntb_parameters.dwNtbOutMaxSize);
+	ncm->port.fixed_in_len = NTB_DEFAULT_IN_SIZE;
+}
+
+/*
+ * Context: ncm->lock held
+ */
+static void ncm_do_notify(struct f_ncm *ncm)
+{
+	struct usb_request		*req = ncm->notify_req;
+	struct usb_cdc_notification	*event;
+	struct usb_composite_dev	*cdev = ncm->port.func.config->cdev;
+	__le32				*data;
+	int				status;
+
+	/* notification already in flight? */
+	if (!req)
+		return;
+
+	event = req->buf;
+	switch (ncm->notify_state) {
+	case NCM_NOTIFY_NONE:
+		return;
+
+	case NCM_NOTIFY_CONNECT:
+		event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION;
+		if (ncm->is_open)
+			event->wValue = cpu_to_le16(1);
+		else
+			event->wValue = cpu_to_le16(0);
+		event->wLength = 0;
+		req->length = sizeof *event;
+
+		DBG(cdev, "notify connect %s\n",
+				ncm->is_open ? "true" : "false");
+		ncm->notify_state = NCM_NOTIFY_NONE;
+		break;
+
+	case NCM_NOTIFY_SPEED:
+		event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE;
+		event->wValue = cpu_to_le16(0);
+		event->wLength = cpu_to_le16(8);
+		req->length = NCM_STATUS_BYTECOUNT;
+
+		/* SPEED_CHANGE data is up/down speeds in bits/sec */
+		data = req->buf + sizeof *event;
+		data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget));
+		data[1] = data[0];
+
+		DBG(cdev, "notify speed %d\n", ncm_bitrate(cdev->gadget));
+		ncm->notify_state = NCM_NOTIFY_CONNECT;
+		break;
+	}
+	event->bmRequestType = 0xA1;
+	event->wIndex = cpu_to_le16(ncm->ctrl_id);
+
+	ncm->notify_req = NULL;
+	/*
+	 * In double buffering if there is a space in FIFO,
+	 * completion callback can be called right after the call,
+	 * so unlocking
+	 */
+	spin_unlock(&ncm->lock);
+	status = usb_ep_queue(ncm->notify, req, GFP_ATOMIC);
+	spin_lock(&ncm->lock);
+	if (status < 0) {
+		ncm->notify_req = req;
+		DBG(cdev, "notify --> %d\n", status);
+	}
+}
+
+/*
+ * Context: ncm->lock held
+ */
+static void ncm_notify(struct f_ncm *ncm)
+{
+	/*
+	 * NOTE on most versions of Linux, host side cdc-ethernet
+	 * won't listen for notifications until its netdevice opens.
+	 * The first notification then sits in the FIFO for a long
+	 * time, and the second one is queued.
+	 *
+	 * If ncm_notify() is called before the second (CONNECT)
+	 * notification is sent, then it will reset to send the SPEED
+	 * notificaion again (and again, and again), but it's not a problem
+	 */
+	ncm->notify_state = NCM_NOTIFY_SPEED;
+	ncm_do_notify(ncm);
+}
+
+static void ncm_notify_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_ncm			*ncm = req->context;
+	struct usb_composite_dev	*cdev = ncm->port.func.config->cdev;
+	struct usb_cdc_notification	*event = req->buf;
+
+	spin_lock(&ncm->lock);
+	switch (req->status) {
+	case 0:
+		VDBG(cdev, "Notification %02x sent\n",
+		     event->bNotificationType);
+		break;
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		ncm->notify_state = NCM_NOTIFY_NONE;
+		break;
+	default:
+		DBG(cdev, "event %02x --> %d\n",
+			event->bNotificationType, req->status);
+		break;
+	}
+	ncm->notify_req = req;
+	ncm_do_notify(ncm);
+	spin_unlock(&ncm->lock);
+}
+
+static void ncm_ep0out_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	/* now for SET_NTB_INPUT_SIZE only */
+	unsigned		in_size;
+	struct usb_function	*f = req->context;
+	struct f_ncm		*ncm = func_to_ncm(f);
+	struct usb_composite_dev *cdev = ep->driver_data;
+
+	req->context = NULL;
+	if (req->status || req->actual != req->length) {
+		DBG(cdev, "Bad control-OUT transfer\n");
+		goto invalid;
+	}
+
+	in_size = get_unaligned_le32(req->buf);
+	if (in_size < USB_CDC_NCM_NTB_MIN_IN_SIZE ||
+	    in_size > le32_to_cpu(ntb_parameters.dwNtbInMaxSize)) {
+		DBG(cdev, "Got wrong INPUT SIZE (%d) from host\n", in_size);
+		goto invalid;
+	}
+
+	ncm->port.fixed_in_len = in_size;
+	VDBG(cdev, "Set NTB INPUT SIZE %d\n", in_size);
+	return;
+
+invalid:
+	usb_ep_set_halt(ep);
+	return;
+}
+
+static int ncm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+	struct f_ncm		*ncm = func_to_ncm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	int			value = -EOPNOTSUPP;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	/*
+	 * composite driver infrastructure handles everything except
+	 * CDC class messages; interface activation uses set_alt().
+	 */
+	switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+			| USB_CDC_SET_ETHERNET_PACKET_FILTER:
+		/*
+		 * see 6.2.30: no data, wIndex = interface,
+		 * wValue = packet filter bitmap
+		 */
+		if (w_length != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		DBG(cdev, "packet filter %02x\n", w_value);
+		/*
+		 * REVISIT locking of cdc_filter.  This assumes the UDC
+		 * driver won't have a concurrent packet TX irq running on
+		 * another CPU; or that if it does, this write is atomic...
+		 */
+		ncm->port.cdc_filter = w_value;
+		value = 0;
+		break;
+	/*
+	 * and optionally:
+	 * case USB_CDC_SEND_ENCAPSULATED_COMMAND:
+	 * case USB_CDC_GET_ENCAPSULATED_RESPONSE:
+	 * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS:
+	 * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER:
+	 * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER:
+	 * case USB_CDC_GET_ETHERNET_STATISTIC:
+	 */
+
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_GET_NTB_PARAMETERS:
+
+		if (w_length == 0 || w_value != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		value = w_length > sizeof ntb_parameters ?
+			sizeof ntb_parameters : w_length;
+		memcpy(req->buf, &ntb_parameters, value);
+		VDBG(cdev, "Host asked NTB parameters\n");
+		break;
+
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_GET_NTB_INPUT_SIZE:
+
+		if (w_length < 4 || w_value != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		put_unaligned_le32(ncm->port.fixed_in_len, req->buf);
+		value = 4;
+		VDBG(cdev, "Host asked INPUT SIZE, sending %d\n",
+		     ncm->port.fixed_in_len);
+		break;
+
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_SET_NTB_INPUT_SIZE:
+	{
+		if (w_length != 4 || w_value != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		req->complete = ncm_ep0out_complete;
+		req->length = w_length;
+		req->context = f;
+
+		value = req->length;
+		break;
+	}
+
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_GET_NTB_FORMAT:
+	{
+		uint16_t format;
+
+		if (w_length < 2 || w_value != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		format = (ncm->parser_opts == &ndp16_opts) ? 0x0000 : 0x0001;
+		put_unaligned_le16(format, req->buf);
+		value = 2;
+		VDBG(cdev, "Host asked NTB FORMAT, sending %d\n", format);
+		break;
+	}
+
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_SET_NTB_FORMAT:
+	{
+		if (w_length != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		switch (w_value) {
+		case 0x0000:
+			ncm->parser_opts = &ndp16_opts;
+			DBG(cdev, "NCM16 selected\n");
+			break;
+		case 0x0001:
+			ncm->parser_opts = &ndp32_opts;
+			DBG(cdev, "NCM32 selected\n");
+			break;
+		default:
+			goto invalid;
+		}
+		value = 0;
+		break;
+	}
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_GET_CRC_MODE:
+	{
+		uint16_t is_crc;
+
+		if (w_length < 2 || w_value != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		is_crc = ncm->is_crc ? 0x0001 : 0x0000;
+		put_unaligned_le16(is_crc, req->buf);
+		value = 2;
+		VDBG(cdev, "Host asked CRC MODE, sending %d\n", is_crc);
+		break;
+	}
+
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_SET_CRC_MODE:
+	{
+		int ndp_hdr_crc = 0;
+
+		if (w_length != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		switch (w_value) {
+		case 0x0000:
+			ncm->is_crc = false;
+			ndp_hdr_crc = NCM_NDP_HDR_NOCRC;
+			DBG(cdev, "non-CRC mode selected\n");
+			break;
+		case 0x0001:
+			ncm->is_crc = true;
+			ndp_hdr_crc = NCM_NDP_HDR_CRC;
+			DBG(cdev, "CRC mode selected\n");
+			break;
+		default:
+			goto invalid;
+		}
+		ncm->parser_opts->ndp_sign &= ~NCM_NDP_HDR_CRC_MASK;
+		ncm->parser_opts->ndp_sign |= ndp_hdr_crc;
+		value = 0;
+		break;
+	}
+
+	/* and disabled in ncm descriptor: */
+	/* case USB_CDC_GET_NET_ADDRESS: */
+	/* case USB_CDC_SET_NET_ADDRESS: */
+	/* case USB_CDC_GET_MAX_DATAGRAM_SIZE: */
+	/* case USB_CDC_SET_MAX_DATAGRAM_SIZE: */
+
+	default:
+invalid:
+		DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+	}
+
+	/* respond with data transfer or status phase? */
+	if (value >= 0) {
+		DBG(cdev, "ncm req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+		req->zero = 0;
+		req->length = value;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0)
+			ERROR(cdev, "ncm req %02x.%02x response err %d\n",
+					ctrl->bRequestType, ctrl->bRequest,
+					value);
+	}
+
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+
+static int ncm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_ncm		*ncm = func_to_ncm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	/* Control interface has only altsetting 0 */
+	if (intf == ncm->ctrl_id) {
+		if (alt != 0)
+			goto fail;
+
+		if (ncm->notify->driver_data) {
+			DBG(cdev, "reset ncm control %d\n", intf);
+			usb_ep_disable(ncm->notify);
+		} else {
+			DBG(cdev, "init ncm ctrl %d\n", intf);
+			ncm->notify_desc = ep_choose(cdev->gadget,
+					ncm->hs.notify,
+					ncm->fs.notify);
+		}
+		usb_ep_enable(ncm->notify, ncm->notify_desc);
+		ncm->notify->driver_data = ncm;
+
+	/* Data interface has two altsettings, 0 and 1 */
+	} else if (intf == ncm->data_id) {
+		if (alt > 1)
+			goto fail;
+
+		if (ncm->port.in_ep->driver_data) {
+			DBG(cdev, "reset ncm\n");
+			gether_disconnect(&ncm->port);
+			ncm_reset_values(ncm);
+		}
+
+		/*
+		 * CDC Network only sends data in non-default altsettings.
+		 * Changing altsettings resets filters, statistics, etc.
+		 */
+		if (alt == 1) {
+			struct net_device	*net;
+
+			if (!ncm->port.in) {
+				DBG(cdev, "init ncm\n");
+				ncm->port.in = ep_choose(cdev->gadget,
+							 ncm->hs.in,
+							 ncm->fs.in);
+				ncm->port.out = ep_choose(cdev->gadget,
+							  ncm->hs.out,
+							  ncm->fs.out);
+			}
+
+			/* TODO */
+			/* Enable zlps by default for NCM conformance;
+			 * override for musb_hdrc (avoids txdma ovhead)
+			 */
+			ncm->port.is_zlp_ok = !(
+				gadget_is_musbhdrc(cdev->gadget)
+				);
+			ncm->port.cdc_filter = DEFAULT_FILTER;
+			DBG(cdev, "activate ncm\n");
+			net = gether_connect(&ncm->port);
+			if (IS_ERR(net))
+				return PTR_ERR(net);
+		}
+
+		spin_lock(&ncm->lock);
+		ncm_notify(ncm);
+		spin_unlock(&ncm->lock);
+	} else
+		goto fail;
+
+	return 0;
+fail:
+	return -EINVAL;
+}
+
+/*
+ * Because the data interface supports multiple altsettings,
+ * this NCM function *MUST* implement a get_alt() method.
+ */
+static int ncm_get_alt(struct usb_function *f, unsigned intf)
+{
+	struct f_ncm		*ncm = func_to_ncm(f);
+
+	if (intf == ncm->ctrl_id)
+		return 0;
+	return ncm->port.in_ep->driver_data ? 1 : 0;
+}
+
+static struct sk_buff *ncm_wrap_ntb(struct gether *port,
+				    struct sk_buff *skb)
+{
+	struct f_ncm	*ncm = func_to_ncm(&port->func);
+	struct sk_buff	*skb2;
+	int		ncb_len = 0;
+	__le16		*tmp;
+	int		div = ntb_parameters.wNdpInDivisor;
+	int		rem = ntb_parameters.wNdpInPayloadRemainder;
+	int		pad;
+	int		ndp_align = ntb_parameters.wNdpInAlignment;
+	int		ndp_pad;
+	unsigned	max_size = ncm->port.fixed_in_len;
+	struct ndp_parser_opts *opts = ncm->parser_opts;
+	unsigned	crc_len = ncm->is_crc ? sizeof(uint32_t) : 0;
+
+	ncb_len += opts->nth_size;
+	ndp_pad = ALIGN(ncb_len, ndp_align) - ncb_len;
+	ncb_len += ndp_pad;
+	ncb_len += opts->ndp_size;
+	ncb_len += 2 * 2 * opts->dgram_item_len; /* Datagram entry */
+	ncb_len += 2 * 2 * opts->dgram_item_len; /* Zero datagram entry */
+	pad = ALIGN(ncb_len, div) + rem - ncb_len;
+	ncb_len += pad;
+
+	if (ncb_len + skb->len + crc_len > max_size) {
+		dev_kfree_skb_any(skb);
+		return NULL;
+	}
+
+	skb2 = skb_copy_expand(skb, ncb_len,
+			       max_size - skb->len - ncb_len - crc_len,
+			       GFP_ATOMIC);
+	dev_kfree_skb_any(skb);
+	if (!skb2)
+		return NULL;
+
+	skb = skb2;
+
+	tmp = (void *) skb_push(skb, ncb_len);
+	memset(tmp, 0, ncb_len);
+
+	put_unaligned_le32(opts->nth_sign, tmp); /* dwSignature */
+	tmp += 2;
+	/* wHeaderLength */
+	put_unaligned_le16(opts->nth_size, tmp++);
+	tmp++; /* skip wSequence */
+	put_ncm(&tmp, opts->block_length, skb->len); /* (d)wBlockLength */
+	/* (d)wFpIndex */
+	/* the first pointer is right after the NTH + align */
+	put_ncm(&tmp, opts->fp_index, opts->nth_size + ndp_pad);
+
+	tmp = (void *)tmp + ndp_pad;
+
+	/* NDP */
+	put_unaligned_le32(opts->ndp_sign, tmp); /* dwSignature */
+	tmp += 2;
+	/* wLength */
+	put_unaligned_le16(ncb_len - opts->nth_size - pad, tmp++);
+
+	tmp += opts->reserved1;
+	tmp += opts->next_fp_index; /* skip reserved (d)wNextFpIndex */
+	tmp += opts->reserved2;
+
+	if (ncm->is_crc) {
+		uint32_t crc;
+
+		crc = ~crc32_le(~0,
+				skb->data + ncb_len,
+				skb->len - ncb_len);
+		put_unaligned_le32(crc, skb->data + skb->len);
+		skb_put(skb, crc_len);
+	}
+
+	/* (d)wDatagramIndex[0] */
+	put_ncm(&tmp, opts->dgram_item_len, ncb_len);
+	/* (d)wDatagramLength[0] */
+	put_ncm(&tmp, opts->dgram_item_len, skb->len - ncb_len);
+	/* (d)wDatagramIndex[1] and  (d)wDatagramLength[1] already zeroed */
+
+	if (skb->len > MAX_TX_NONFIXED)
+		memset(skb_put(skb, max_size - skb->len),
+		       0, max_size - skb->len);
+
+	return skb;
+}
+
+static int ncm_unwrap_ntb(struct gether *port,
+			  struct sk_buff *skb,
+			  struct sk_buff_head *list)
+{
+	struct f_ncm	*ncm = func_to_ncm(&port->func);
+	__le16		*tmp = (void *) skb->data;
+	unsigned	index, index2;
+	unsigned	dg_len, dg_len2;
+	unsigned	ndp_len;
+	struct sk_buff	*skb2;
+	int		ret = -EINVAL;
+	unsigned	max_size = le32_to_cpu(ntb_parameters.dwNtbOutMaxSize);
+	struct ndp_parser_opts *opts = ncm->parser_opts;
+	unsigned	crc_len = ncm->is_crc ? sizeof(uint32_t) : 0;
+	int		dgram_counter;
+
+	/* dwSignature */
+	if (get_unaligned_le32(tmp) != opts->nth_sign) {
+		INFO(port->func.config->cdev, "Wrong NTH SIGN, skblen %d\n",
+			skb->len);
+		print_hex_dump(KERN_INFO, "HEAD:", DUMP_PREFIX_ADDRESS, 32, 1,
+			       skb->data, 32, false);
+
+		goto err;
+	}
+	tmp += 2;
+	/* wHeaderLength */
+	if (get_unaligned_le16(tmp++) != opts->nth_size) {
+		INFO(port->func.config->cdev, "Wrong NTB headersize\n");
+		goto err;
+	}
+	tmp++; /* skip wSequence */
+
+	/* (d)wBlockLength */
+	if (get_ncm(&tmp, opts->block_length) > max_size) {
+		INFO(port->func.config->cdev, "OUT size exceeded\n");
+		goto err;
+	}
+
+	index = get_ncm(&tmp, opts->fp_index);
+	/* NCM 3.2 */
+	if (((index % 4) != 0) && (index < opts->nth_size)) {
+		INFO(port->func.config->cdev, "Bad index: %x\n",
+			index);
+		goto err;
+	}
+
+	/* walk through NDP */
+	tmp = ((void *)skb->data) + index;
+	if (get_unaligned_le32(tmp) != opts->ndp_sign) {
+		INFO(port->func.config->cdev, "Wrong NDP SIGN\n");
+		goto err;
+	}
+	tmp += 2;
+
+	ndp_len = get_unaligned_le16(tmp++);
+	/*
+	 * NCM 3.3.1
+	 * entry is 2 items
+	 * item size is 16/32 bits, opts->dgram_item_len * 2 bytes
+	 * minimal: struct usb_cdc_ncm_ndpX + normal entry + zero entry
+	 */
+	if ((ndp_len < opts->ndp_size + 2 * 2 * (opts->dgram_item_len * 2))
+	    || (ndp_len % opts->ndplen_align != 0)) {
+		INFO(port->func.config->cdev, "Bad NDP length: %x\n", ndp_len);
+		goto err;
+	}
+	tmp += opts->reserved1;
+	tmp += opts->next_fp_index; /* skip reserved (d)wNextFpIndex */
+	tmp += opts->reserved2;
+
+	ndp_len -= opts->ndp_size;
+	index2 = get_ncm(&tmp, opts->dgram_item_len);
+	dg_len2 = get_ncm(&tmp, opts->dgram_item_len);
+	dgram_counter = 0;
+
+	do {
+		index = index2;
+		dg_len = dg_len2;
+		if (dg_len < 14 + crc_len) { /* ethernet header + crc */
+			INFO(port->func.config->cdev, "Bad dgram length: %x\n",
+			     dg_len);
+			goto err;
+		}
+		if (ncm->is_crc) {
+			uint32_t crc, crc2;
+
+			crc = get_unaligned_le32(skb->data +
+						 index + dg_len - crc_len);
+			crc2 = ~crc32_le(~0,
+					 skb->data + index,
+					 dg_len - crc_len);
+			if (crc != crc2) {
+				INFO(port->func.config->cdev, "Bad CRC\n");
+				goto err;
+			}
+		}
+
+		index2 = get_ncm(&tmp, opts->dgram_item_len);
+		dg_len2 = get_ncm(&tmp, opts->dgram_item_len);
+
+		if (index2 == 0 || dg_len2 == 0) {
+			skb2 = skb;
+		} else {
+			skb2 = skb_clone(skb, GFP_ATOMIC);
+			if (skb2 == NULL)
+				goto err;
+		}
+
+		if (!skb_pull(skb2, index)) {
+			ret = -EOVERFLOW;
+			goto err;
+		}
+
+		skb_trim(skb2, dg_len - crc_len);
+		skb_queue_tail(list, skb2);
+
+		ndp_len -= 2 * (opts->dgram_item_len * 2);
+
+		dgram_counter++;
+
+		if (index2 == 0 || dg_len2 == 0)
+			break;
+	} while (ndp_len > 2 * (opts->dgram_item_len * 2)); /* zero entry */
+
+	VDBG(port->func.config->cdev,
+	     "Parsed NTB with %d frames\n", dgram_counter);
+	return 0;
+err:
+	skb_queue_purge(list);
+	dev_kfree_skb_any(skb);
+	return ret;
+}
+
+static void ncm_disable(struct usb_function *f)
+{
+	struct f_ncm		*ncm = func_to_ncm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	DBG(cdev, "ncm deactivated\n");
+
+	if (ncm->port.in_ep->driver_data)
+		gether_disconnect(&ncm->port);
+
+	if (ncm->notify->driver_data) {
+		usb_ep_disable(ncm->notify);
+		ncm->notify->driver_data = NULL;
+		ncm->notify_desc = NULL;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Callbacks let us notify the host about connect/disconnect when the
+ * net device is opened or closed.
+ *
+ * For testing, note that link states on this side include both opened
+ * and closed variants of:
+ *
+ *   - disconnected/unconfigured
+ *   - configured but inactive (data alt 0)
+ *   - configured and active (data alt 1)
+ *
+ * Each needs to be tested with unplug, rmmod, SET_CONFIGURATION, and
+ * SET_INTERFACE (altsetting).  Remember also that "configured" doesn't
+ * imply the host is actually polling the notification endpoint, and
+ * likewise that "active" doesn't imply it's actually using the data
+ * endpoints for traffic.
+ */
+
+static void ncm_open(struct gether *geth)
+{
+	struct f_ncm		*ncm = func_to_ncm(&geth->func);
+
+	DBG(ncm->port.func.config->cdev, "%s\n", __func__);
+
+	spin_lock(&ncm->lock);
+	ncm->is_open = true;
+	ncm_notify(ncm);
+	spin_unlock(&ncm->lock);
+}
+
+static void ncm_close(struct gether *geth)
+{
+	struct f_ncm		*ncm = func_to_ncm(&geth->func);
+
+	DBG(ncm->port.func.config->cdev, "%s\n", __func__);
+
+	spin_lock(&ncm->lock);
+	ncm->is_open = false;
+	ncm_notify(ncm);
+	spin_unlock(&ncm->lock);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* ethernet function driver setup/binding */
+
+static int __init
+ncm_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_ncm		*ncm = func_to_ncm(f);
+	int			status;
+	struct usb_ep		*ep;
+
+	/* allocate instance-specific interface IDs */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	ncm->ctrl_id = status;
+	ncm_iad_desc.bFirstInterface = status;
+
+	ncm_control_intf.bInterfaceNumber = status;
+	ncm_union_desc.bMasterInterface0 = status;
+
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	ncm->data_id = status;
+
+	ncm_data_nop_intf.bInterfaceNumber = status;
+	ncm_data_intf.bInterfaceNumber = status;
+	ncm_union_desc.bSlaveInterface0 = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_ncm_in_desc);
+	if (!ep)
+		goto fail;
+	ncm->port.in_ep = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_ncm_out_desc);
+	if (!ep)
+		goto fail;
+	ncm->port.out_ep = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_ncm_notify_desc);
+	if (!ep)
+		goto fail;
+	ncm->notify = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	status = -ENOMEM;
+
+	/* allocate notification request and buffer */
+	ncm->notify_req = usb_ep_alloc_request(ep, GFP_KERNEL);
+	if (!ncm->notify_req)
+		goto fail;
+	ncm->notify_req->buf = kmalloc(NCM_STATUS_BYTECOUNT, GFP_KERNEL);
+	if (!ncm->notify_req->buf)
+		goto fail;
+	ncm->notify_req->context = ncm;
+	ncm->notify_req->complete = ncm_notify_complete;
+
+	/* copy descriptors, and track endpoint copies */
+	f->descriptors = usb_copy_descriptors(ncm_fs_function);
+	if (!f->descriptors)
+		goto fail;
+
+	ncm->fs.in = usb_find_endpoint(ncm_fs_function,
+			f->descriptors, &fs_ncm_in_desc);
+	ncm->fs.out = usb_find_endpoint(ncm_fs_function,
+			f->descriptors, &fs_ncm_out_desc);
+	ncm->fs.notify = usb_find_endpoint(ncm_fs_function,
+			f->descriptors, &fs_ncm_notify_desc);
+
+	/*
+	 * support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+	if (gadget_is_dualspeed(c->cdev->gadget)) {
+		hs_ncm_in_desc.bEndpointAddress =
+				fs_ncm_in_desc.bEndpointAddress;
+		hs_ncm_out_desc.bEndpointAddress =
+				fs_ncm_out_desc.bEndpointAddress;
+		hs_ncm_notify_desc.bEndpointAddress =
+				fs_ncm_notify_desc.bEndpointAddress;
+
+		/* copy descriptors, and track endpoint copies */
+		f->hs_descriptors = usb_copy_descriptors(ncm_hs_function);
+		if (!f->hs_descriptors)
+			goto fail;
+
+		ncm->hs.in = usb_find_endpoint(ncm_hs_function,
+				f->hs_descriptors, &hs_ncm_in_desc);
+		ncm->hs.out = usb_find_endpoint(ncm_hs_function,
+				f->hs_descriptors, &hs_ncm_out_desc);
+		ncm->hs.notify = usb_find_endpoint(ncm_hs_function,
+				f->hs_descriptors, &hs_ncm_notify_desc);
+	}
+
+	/*
+	 * NOTE:  all that is done without knowing or caring about
+	 * the network link ... which is unavailable to this code
+	 * until we're activated via set_alt().
+	 */
+
+	ncm->port.open = ncm_open;
+	ncm->port.close = ncm_close;
+
+	DBG(cdev, "CDC Network: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+			ncm->port.in_ep->name, ncm->port.out_ep->name,
+			ncm->notify->name);
+	return 0;
+
+fail:
+	if (f->descriptors)
+		usb_free_descriptors(f->descriptors);
+
+	if (ncm->notify_req) {
+		kfree(ncm->notify_req->buf);
+		usb_ep_free_request(ncm->notify, ncm->notify_req);
+	}
+
+	/* we might as well release our claims on endpoints */
+	if (ncm->notify)
+		ncm->notify->driver_data = NULL;
+	if (ncm->port.out)
+		ncm->port.out_ep->driver_data = NULL;
+	if (ncm->port.in)
+		ncm->port.in_ep->driver_data = NULL;
+
+	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+	return status;
+}
+
+static void
+ncm_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_ncm		*ncm = func_to_ncm(f);
+
+	DBG(c->cdev, "ncm unbind\n");
+
+	if (gadget_is_dualspeed(c->cdev->gadget))
+		usb_free_descriptors(f->hs_descriptors);
+	usb_free_descriptors(f->descriptors);
+
+	kfree(ncm->notify_req->buf);
+	usb_ep_free_request(ncm->notify, ncm->notify_req);
+
+	ncm_string_defs[1].s = NULL;
+	kfree(ncm);
+}
+
+/**
+ * ncm_bind_config - add CDC Network link to a configuration
+ * @c: the configuration to support the network link
+ * @ethaddr: a buffer in which the ethernet address of the host side
+ *	side of the link was recorded
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * Caller must have called @gether_setup().  Caller is also responsible
+ * for calling @gether_cleanup() before module unload.
+ */
+int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
+{
+	struct f_ncm	*ncm;
+	int		status;
+
+	if (!can_support_ecm(c->cdev->gadget) || !ethaddr)
+		return -EINVAL;
+
+	/* maybe allocate device-global string IDs */
+	if (ncm_string_defs[0].id == 0) {
+
+		/* control interface label */
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		ncm_string_defs[STRING_CTRL_IDX].id = status;
+		ncm_control_intf.iInterface = status;
+
+		/* data interface label */
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		ncm_string_defs[STRING_DATA_IDX].id = status;
+		ncm_data_nop_intf.iInterface = status;
+		ncm_data_intf.iInterface = status;
+
+		/* MAC address */
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		ncm_string_defs[STRING_MAC_IDX].id = status;
+		ecm_desc.iMACAddress = status;
+
+		/* IAD */
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		ncm_string_defs[STRING_IAD_IDX].id = status;
+		ncm_iad_desc.iFunction = status;
+	}
+
+	/* allocate and initialize one new instance */
+	ncm = kzalloc(sizeof *ncm, GFP_KERNEL);
+	if (!ncm)
+		return -ENOMEM;
+
+	/* export host's Ethernet address in CDC format */
+	snprintf(ncm->ethaddr, sizeof ncm->ethaddr,
+		"%02X%02X%02X%02X%02X%02X",
+		ethaddr[0], ethaddr[1], ethaddr[2],
+		ethaddr[3], ethaddr[4], ethaddr[5]);
+	ncm_string_defs[1].s = ncm->ethaddr;
+
+	spin_lock_init(&ncm->lock);
+	ncm_reset_values(ncm);
+	ncm->port.is_fixed = true;
+
+	ncm->port.func.name = "cdc_network";
+	ncm->port.func.strings = ncm_strings;
+	/* descriptors are per-instance copies */
+	ncm->port.func.bind = ncm_bind;
+	ncm->port.func.unbind = ncm_unbind;
+	ncm->port.func.set_alt = ncm_set_alt;
+	ncm->port.func.get_alt = ncm_get_alt;
+	ncm->port.func.setup = ncm_setup;
+	ncm->port.func.disable = ncm_disable;
+
+	ncm->port.wrap = ncm_wrap_ntb;
+	ncm->port.unwrap = ncm_unwrap_ntb;
+
+	status = usb_add_function(c, &ncm->port.func);
+	if (status) {
+		ncm_string_defs[1].s = NULL;
+		kfree(ncm);
+	}
+	return status;
+}
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index d4fdf65fb92..a6eacb59571 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3392,25 +3392,28 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 		dev_set_name(&curlun->dev,"%s-lun%d",
 			     dev_name(&gadget->dev), i);
 
-		if ((rc = device_register(&curlun->dev)) != 0) {
+		kref_get(&fsg->ref);
+		rc = device_register(&curlun->dev);
+		if (rc) {
 			INFO(fsg, "failed to register LUN%d: %d\n", i, rc);
-			goto out;
-		}
-		if ((rc = device_create_file(&curlun->dev,
-					&dev_attr_ro)) != 0 ||
-				(rc = device_create_file(&curlun->dev,
-					&dev_attr_nofua)) != 0 ||
-				(rc = device_create_file(&curlun->dev,
-					&dev_attr_file)) != 0) {
-			device_unregister(&curlun->dev);
+			put_device(&curlun->dev);
 			goto out;
 		}
 		curlun->registered = 1;
-		kref_get(&fsg->ref);
+
+		rc = device_create_file(&curlun->dev, &dev_attr_ro);
+		if (rc)
+			goto out;
+		rc = device_create_file(&curlun->dev, &dev_attr_nofua);
+		if (rc)
+			goto out;
+		rc = device_create_file(&curlun->dev, &dev_attr_file);
+		if (rc)
+			goto out;
 
 		if (mod_data.file[i] && *mod_data.file[i]) {
-			if ((rc = fsg_lun_open(curlun,
-					mod_data.file[i])) != 0)
+			rc = fsg_lun_open(curlun, mod_data.file[i]);
+			if (rc)
 				goto out;
 		} else if (!mod_data.removable) {
 			ERROR(fsg, "no file given for LUN%d\n", i);
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 5bdbfe61985..77b1eb57702 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -93,9 +93,9 @@ void fsl_udc_clk_finalize(struct platform_device *pdev)
 
 	/* workaround ENGcm09152 for i.MX35 */
 	if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
-		v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+		v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
 				USBPHYCTRL_OTGBASE_OFFSET));
-		writel(v | USBPHYCTRL_EVDO, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+		writel(v | USBPHYCTRL_EVDO, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
 				USBPHYCTRL_OTGBASE_OFFSET));
 	}
 #endif
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index af75e362084..ebf6970a10b 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -1,7 +1,29 @@
+/*
+ * g_ffs.c -- user mode file system API for USB composite function controllers
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ * Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define pr_fmt(fmt) "g_ffs: " fmt
+
 #include <linux/module.h>
 #include <linux/utsname.h>
 
-
 /*
  * kbuild is not very cooperative with respect to linking separately
  * compiled library objects into one module.  So for now we won't use
@@ -43,7 +65,6 @@ static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
 
 #include "f_fs.c"
 
-
 #define DRIVER_NAME	"g_ffs"
 #define DRIVER_DESC	"USB Function Filesystem"
 #define DRIVER_VERSION	"24 Aug 2004"
@@ -73,8 +94,6 @@ MODULE_PARM_DESC(bDeviceSubClass, "USB Device subclass");
 module_param_named(bDeviceProtocol, gfs_dev_desc.bDeviceProtocol, byte,   0644);
 MODULE_PARM_DESC(bDeviceProtocol, "USB Device protocol");
 
-
-
 static const struct usb_descriptor_header *gfs_otg_desc[] = {
 	(const struct usb_descriptor_header *)
 	&(const struct usb_otg_descriptor) {
@@ -91,8 +110,7 @@ static const struct usb_descriptor_header *gfs_otg_desc[] = {
 	NULL
 };
 
-/* string IDs are assigned dynamically */
-
+/* String IDs are assigned dynamically */
 static struct usb_string gfs_strings[] = {
 #ifdef CONFIG_USB_FUNCTIONFS_RNDIS
 	{ .s = "FunctionFS + RNDIS" },
@@ -114,8 +132,6 @@ static struct usb_gadget_strings *gfs_dev_strings[] = {
 	NULL,
 };
 
-
-
 struct gfs_configuration {
 	struct usb_configuration c;
 	int (*eth)(struct usb_configuration *c, u8 *ethaddr);
@@ -138,7 +154,6 @@ struct gfs_configuration {
 #endif
 };
 
-
 static int gfs_bind(struct usb_composite_dev *cdev);
 static int gfs_unbind(struct usb_composite_dev *cdev);
 static int gfs_do_config(struct usb_configuration *c);
@@ -151,11 +166,9 @@ static struct usb_composite_driver gfs_driver = {
 	.iProduct	= DRIVER_DESC,
 };
 
-
 static struct ffs_data *gfs_ffs_data;
 static unsigned long gfs_registered;
 
-
 static int  gfs_init(void)
 {
 	ENTER();
@@ -175,7 +188,6 @@ static void  gfs_exit(void)
 }
 module_exit(gfs_exit);
 
-
 static int functionfs_ready_callback(struct ffs_data *ffs)
 {
 	int ret;
@@ -200,14 +212,11 @@ static void functionfs_closed_callback(struct ffs_data *ffs)
 		usb_composite_unregister(&gfs_driver);
 }
 
-
 static int functionfs_check_dev_callback(const char *dev_name)
 {
 	return 0;
 }
 
-
-
 static int gfs_bind(struct usb_composite_dev *cdev)
 {
 	int ret, i;
@@ -274,7 +283,6 @@ static int gfs_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-
 static int gfs_do_config(struct usb_configuration *c)
 {
 	struct gfs_configuration *gc =
@@ -315,7 +323,6 @@ static int gfs_do_config(struct usb_configuration *c)
 	return 0;
 }
 
-
 #ifdef CONFIG_USB_FUNCTIONFS_ETH
 
 static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index e511fec9f26..5c2720d64ff 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -96,7 +96,7 @@
 
 /* Mentor high speed "dual role" controller, in peripheral role */
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
-#define gadget_is_musbhdrc(g)	!strcmp("musb_hdrc", (g)->name)
+#define gadget_is_musbhdrc(g)	!strcmp("musb-hdrc", (g)->name)
 #else
 #define gadget_is_musbhdrc(g)	0
 #endif
@@ -120,10 +120,10 @@
 #define gadget_is_fsl_qe(g)	0
 #endif
 
-#ifdef CONFIG_USB_GADGET_CI13XXX
-#define gadget_is_ci13xxx(g)	(!strcmp("ci13xxx_udc", (g)->name))
+#ifdef CONFIG_USB_GADGET_CI13XXX_PCI
+#define gadget_is_ci13xxx_pci(g)	(!strcmp("ci13xxx_pci", (g)->name))
 #else
-#define gadget_is_ci13xxx(g)	0
+#define gadget_is_ci13xxx_pci(g)	0
 #endif
 
 // CONFIG_USB_GADGET_SX2
@@ -142,6 +142,17 @@
 #define gadget_is_s3c_hsotg(g)    0
 #endif
 
+#ifdef CONFIG_USB_GADGET_EG20T
+#define	gadget_is_pch(g)	(!strcmp("pch_udc", (g)->name))
+#else
+#define	gadget_is_pch(g)	0
+#endif
+
+#ifdef CONFIG_USB_GADGET_CI13XXX_MSM
+#define gadget_is_ci13xxx_msm(g)	(!strcmp("ci13xxx_msm", (g)->name))
+#else
+#define gadget_is_ci13xxx_msm(g)	0
+#endif
 
 /**
  * usb_gadget_controller_number - support bcdDevice id convention
@@ -192,7 +203,7 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x21;
 	else if (gadget_is_fsl_qe(gadget))
 		return 0x22;
-	else if (gadget_is_ci13xxx(gadget))
+	else if (gadget_is_ci13xxx_pci(gadget))
 		return 0x23;
 	else if (gadget_is_langwell(gadget))
 		return 0x24;
@@ -200,6 +211,10 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x25;
 	else if (gadget_is_s3c_hsotg(gadget))
 		return 0x26;
+	else if (gadget_is_pch(gadget))
+		return 0x27;
+	else if (gadget_is_ci13xxx_msm(gadget))
+		return 0x28;
 	return -ENOENT;
 }
 
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index ed0266462c5..1210534822d 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1191,13 +1191,17 @@ static irqreturn_t imx_udc_ctrl_irq(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
+#ifndef MX1_INT_USBD0
+#define MX1_INT_USBD0 MX1_USBD_INT0
+#endif
+
 static irqreturn_t imx_udc_bulk_irq(int irq, void *dev)
 {
 	struct imx_udc_struct *imx_usb = dev;
-	struct imx_ep_struct *imx_ep = &imx_usb->imx_ep[irq - USBD_INT0];
+	struct imx_ep_struct *imx_ep = &imx_usb->imx_ep[irq - MX1_INT_USBD0];
 	int intr = __raw_readl(imx_usb->base + USB_EP_INTR(EP_NO(imx_ep)));
 
-	dump_ep_intr(__func__, irq - USBD_INT0, intr, imx_usb->dev);
+	dump_ep_intr(__func__, irq - MX1_INT_USBD0, intr, imx_usb->dev);
 
 	if (!imx_usb->driver) {
 		__raw_writel(intr, imx_usb->base + USB_EP_INTR(EP_NO(imx_ep)));
diff --git a/drivers/usb/gadget/imx_udc.h b/drivers/usb/gadget/imx_udc.h
index b48ad59603d..7136c242b4e 100644
--- a/drivers/usb/gadget/imx_udc.h
+++ b/drivers/usb/gadget/imx_udc.h
@@ -23,9 +23,6 @@
 /* Helper macros */
 #define EP_NO(ep)	((ep->bEndpointAddress) & ~USB_DIR_IN) /* IN:1, OUT:0 */
 #define EP_DIR(ep)	((ep->bEndpointAddress) & USB_DIR_IN ? 1 : 0)
-#define irq_to_ep(irq)	(((irq) >= USBD_INT0) || ((irq) <= USBD_INT6) \
-		? ((irq) - USBD_INT0) : (USBD_INT6)) /*should not happen*/
-#define ep_to_irq(ep)	(EP_NO((ep)) + USBD_INT0)
 #define IMX_USB_NB_EP	6
 
 /* Driver structures */
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index b8ec954c069..777972454e3 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -2225,6 +2225,7 @@ static void handle_setup_packet(struct langwell_udc *dev,
 	u16	wValue = le16_to_cpu(setup->wValue);
 	u16	wIndex = le16_to_cpu(setup->wIndex);
 	u16	wLength = le16_to_cpu(setup->wLength);
+	u32	portsc1;
 
 	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
@@ -2313,6 +2314,28 @@ static void handle_setup_packet(struct langwell_udc *dev,
 					dev->dev_status &= ~(1 << wValue);
 				}
 				break;
+			case USB_DEVICE_TEST_MODE:
+				dev_dbg(&dev->pdev->dev, "SETUP: TEST MODE\n");
+				if ((wIndex & 0xff) ||
+					(dev->gadget.speed != USB_SPEED_HIGH))
+					ep0_stall(dev);
+
+				switch (wIndex >> 8) {
+				case TEST_J:
+				case TEST_K:
+				case TEST_SE0_NAK:
+				case TEST_PACKET:
+				case TEST_FORCE_EN:
+					if (prime_status_phase(dev, EP_DIR_IN))
+						ep0_stall(dev);
+					portsc1 = readl(&dev->op_regs->portsc1);
+					portsc1 |= (wIndex & 0xf00) << 8;
+					writel(portsc1, &dev->op_regs->portsc1);
+					goto end;
+				default:
+					rc = -EOPNOTSUPP;
+				}
+				break;
 			default:
 				rc = -EOPNOTSUPP;
 				break;
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 0769179dbdb..01822422c3e 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -102,7 +102,7 @@ static struct fsg_module_parameters mod_data = {
 };
 FSG_MODULE_PARAMETERS(/* no prefix */, mod_data);
 
-static unsigned long msg_registered = 0;
+static unsigned long msg_registered;
 static void msg_cleanup(void);
 
 static int msg_thread_exits(struct fsg_common *common)
diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h
new file mode 100644
index 00000000000..65f1f7c3bd4
--- /dev/null
+++ b/drivers/usb/gadget/mv_udc.h
@@ -0,0 +1,294 @@
+
+#ifndef __MV_UDC_H
+#define __MV_UDC_H
+
+#define VUSBHS_MAX_PORTS	8
+
+#define DQH_ALIGNMENT		2048
+#define DTD_ALIGNMENT		64
+#define DMA_BOUNDARY		4096
+
+#define EP_DIR_IN	1
+#define EP_DIR_OUT	0
+
+#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+#define EP0_MAX_PKT_SIZE	64
+/* ep0 transfer state */
+#define WAIT_FOR_SETUP		0
+#define DATA_STATE_XMIT		1
+#define DATA_STATE_NEED_ZLP	2
+#define WAIT_FOR_OUT_STATUS	3
+#define DATA_STATE_RECV		4
+
+#define CAPLENGTH_MASK		(0xff)
+#define DCCPARAMS_DEN_MASK	(0x1f)
+
+#define HCSPARAMS_PPC		(0x10)
+
+/* Frame Index Register Bit Masks */
+#define USB_FRINDEX_MASKS	0x3fff
+
+/* Command Register Bit Masks */
+#define USBCMD_RUN_STOP				(0x00000001)
+#define USBCMD_CTRL_RESET			(0x00000002)
+#define USBCMD_SETUP_TRIPWIRE_SET		(0x00002000)
+#define USBCMD_SETUP_TRIPWIRE_CLEAR		(~USBCMD_SETUP_TRIPWIRE_SET)
+
+#define USBCMD_ATDTW_TRIPWIRE_SET		(0x00004000)
+#define USBCMD_ATDTW_TRIPWIRE_CLEAR		(~USBCMD_ATDTW_TRIPWIRE_SET)
+
+/* bit 15,3,2 are for frame list size */
+#define USBCMD_FRAME_SIZE_1024			(0x00000000) /* 000 */
+#define USBCMD_FRAME_SIZE_512			(0x00000004) /* 001 */
+#define USBCMD_FRAME_SIZE_256			(0x00000008) /* 010 */
+#define USBCMD_FRAME_SIZE_128			(0x0000000C) /* 011 */
+#define USBCMD_FRAME_SIZE_64			(0x00008000) /* 100 */
+#define USBCMD_FRAME_SIZE_32			(0x00008004) /* 101 */
+#define USBCMD_FRAME_SIZE_16			(0x00008008) /* 110 */
+#define USBCMD_FRAME_SIZE_8			(0x0000800C) /* 111 */
+
+#define EPCTRL_TX_ALL_MASK			(0xFFFF0000)
+#define EPCTRL_RX_ALL_MASK			(0x0000FFFF)
+
+#define EPCTRL_TX_DATA_TOGGLE_RST		(0x00400000)
+#define EPCTRL_TX_EP_STALL			(0x00010000)
+#define EPCTRL_RX_EP_STALL			(0x00000001)
+#define EPCTRL_RX_DATA_TOGGLE_RST		(0x00000040)
+#define EPCTRL_RX_ENABLE			(0x00000080)
+#define EPCTRL_TX_ENABLE			(0x00800000)
+#define EPCTRL_CONTROL				(0x00000000)
+#define EPCTRL_ISOCHRONOUS			(0x00040000)
+#define EPCTRL_BULK				(0x00080000)
+#define EPCTRL_INT				(0x000C0000)
+#define EPCTRL_TX_TYPE				(0x000C0000)
+#define EPCTRL_RX_TYPE				(0x0000000C)
+#define EPCTRL_DATA_TOGGLE_INHIBIT		(0x00000020)
+#define EPCTRL_TX_EP_TYPE_SHIFT			(18)
+#define EPCTRL_RX_EP_TYPE_SHIFT			(2)
+
+#define EPCOMPLETE_MAX_ENDPOINTS		(16)
+
+/* endpoint list address bit masks */
+#define USB_EP_LIST_ADDRESS_MASK              0xfffff800
+
+#define PORTSCX_W1C_BITS			0x2a
+#define PORTSCX_PORT_RESET			0x00000100
+#define PORTSCX_PORT_POWER			0x00001000
+#define PORTSCX_FORCE_FULL_SPEED_CONNECT	0x01000000
+#define PORTSCX_PAR_XCVR_SELECT			0xC0000000
+#define PORTSCX_PORT_FORCE_RESUME		0x00000040
+#define PORTSCX_PORT_SUSPEND			0x00000080
+#define PORTSCX_PORT_SPEED_FULL			0x00000000
+#define PORTSCX_PORT_SPEED_LOW			0x04000000
+#define PORTSCX_PORT_SPEED_HIGH			0x08000000
+#define PORTSCX_PORT_SPEED_MASK			0x0C000000
+
+/* USB MODE Register Bit Masks */
+#define USBMODE_CTRL_MODE_IDLE			0x00000000
+#define USBMODE_CTRL_MODE_DEVICE		0x00000002
+#define USBMODE_CTRL_MODE_HOST			0x00000003
+#define USBMODE_CTRL_MODE_RSV			0x00000001
+#define USBMODE_SETUP_LOCK_OFF			0x00000008
+#define USBMODE_STREAM_DISABLE			0x00000010
+
+/* USB STS Register Bit Masks */
+#define USBSTS_INT			0x00000001
+#define USBSTS_ERR			0x00000002
+#define USBSTS_PORT_CHANGE		0x00000004
+#define USBSTS_FRM_LST_ROLL		0x00000008
+#define USBSTS_SYS_ERR			0x00000010
+#define USBSTS_IAA			0x00000020
+#define USBSTS_RESET			0x00000040
+#define USBSTS_SOF			0x00000080
+#define USBSTS_SUSPEND			0x00000100
+#define USBSTS_HC_HALTED		0x00001000
+#define USBSTS_RCL			0x00002000
+#define USBSTS_PERIODIC_SCHEDULE	0x00004000
+#define USBSTS_ASYNC_SCHEDULE		0x00008000
+
+
+/* Interrupt Enable Register Bit Masks */
+#define USBINTR_INT_EN                          (0x00000001)
+#define USBINTR_ERR_INT_EN                      (0x00000002)
+#define USBINTR_PORT_CHANGE_DETECT_EN           (0x00000004)
+
+#define USBINTR_ASYNC_ADV_AAE                   (0x00000020)
+#define USBINTR_ASYNC_ADV_AAE_ENABLE            (0x00000020)
+#define USBINTR_ASYNC_ADV_AAE_DISABLE           (0xFFFFFFDF)
+
+#define USBINTR_RESET_EN                        (0x00000040)
+#define USBINTR_SOF_UFRAME_EN                   (0x00000080)
+#define USBINTR_DEVICE_SUSPEND                  (0x00000100)
+
+#define USB_DEVICE_ADDRESS_MASK			(0xfe000000)
+#define USB_DEVICE_ADDRESS_BIT_SHIFT		(25)
+
+struct mv_cap_regs {
+	u32	caplength_hciversion;
+	u32	hcsparams;	/* HC structural parameters */
+	u32	hccparams;	/* HC Capability Parameters*/
+	u32	reserved[5];
+	u32	dciversion;	/* DC version number and reserved 16 bits */
+	u32	dccparams;	/* DC Capability Parameters */
+};
+
+struct mv_op_regs {
+	u32	usbcmd;		/* Command register */
+	u32	usbsts;		/* Status register */
+	u32	usbintr;	/* Interrupt enable */
+	u32	frindex;	/* Frame index */
+	u32	reserved1[1];
+	u32	deviceaddr;	/* Device Address */
+	u32	eplistaddr;	/* Endpoint List Address */
+	u32	ttctrl;		/* HOST TT status and control */
+	u32	burstsize;	/* Programmable Burst Size */
+	u32	txfilltuning;	/* Host Transmit Pre-Buffer Packet Tuning */
+	u32	reserved[4];
+	u32	epnak;		/* Endpoint NAK */
+	u32	epnaken;	/* Endpoint NAK Enable */
+	u32	configflag;	/* Configured Flag register */
+	u32	portsc[VUSBHS_MAX_PORTS]; /* Port Status/Control x, x = 1..8 */
+	u32	otgsc;
+	u32	usbmode;	/* USB Host/Device mode */
+	u32	epsetupstat;	/* Endpoint Setup Status */
+	u32	epprime;	/* Endpoint Initialize */
+	u32	epflush;	/* Endpoint De-initialize */
+	u32	epstatus;	/* Endpoint Status */
+	u32	epcomplete;	/* Endpoint Interrupt On Complete */
+	u32	epctrlx[16];	/* Endpoint Control, where x = 0.. 15 */
+	u32	mcr;		/* Mux Control */
+	u32	isr;		/* Interrupt Status */
+	u32	ier;		/* Interrupt Enable */
+};
+
+struct mv_udc {
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	spinlock_t			lock;
+	struct completion		*done;
+	struct platform_device		*dev;
+	int				irq;
+
+	struct mv_cap_regs __iomem	*cap_regs;
+	struct mv_op_regs __iomem	*op_regs;
+	unsigned int			phy_regs;
+	unsigned int			max_eps;
+	struct mv_dqh			*ep_dqh;
+	size_t				ep_dqh_size;
+	dma_addr_t			ep_dqh_dma;
+
+	struct dma_pool			*dtd_pool;
+	struct mv_ep			*eps;
+
+	struct mv_dtd			*dtd_head;
+	struct mv_dtd			*dtd_tail;
+	unsigned int			dtd_entries;
+
+	struct mv_req			*status_req;
+	struct usb_ctrlrequest		local_setup_buff;
+
+	unsigned int		resume_state;	/* USB state to resume */
+	unsigned int		usb_state;	/* USB current state */
+	unsigned int		ep0_state;	/* Endpoint zero state */
+	unsigned int		ep0_dir;
+
+	unsigned int		dev_addr;
+
+	int			errors;
+	unsigned		softconnect:1,
+				vbus_active:1,
+				remote_wakeup:1,
+				softconnected:1,
+				force_fs:1;
+	struct clk		*clk;
+};
+
+/* endpoint data structure */
+struct mv_ep {
+	struct usb_ep		ep;
+	struct mv_udc		*udc;
+	struct list_head	queue;
+	struct mv_dqh		*dqh;
+	const struct usb_endpoint_descriptor	*desc;
+	u32			direction;
+	char			name[14];
+	unsigned		stopped:1,
+				wedge:1,
+				ep_type:2,
+				ep_num:8;
+};
+
+/* request data structure */
+struct mv_req {
+	struct usb_request	req;
+	struct mv_dtd		*dtd, *head, *tail;
+	struct mv_ep		*ep;
+	struct list_head	queue;
+	unsigned		dtd_count;
+	unsigned		mapped:1;
+};
+
+#define EP_QUEUE_HEAD_MULT_POS			30
+#define EP_QUEUE_HEAD_ZLT_SEL			0x20000000
+#define EP_QUEUE_HEAD_MAX_PKT_LEN_POS		16
+#define EP_QUEUE_HEAD_MAX_PKT_LEN(ep_info)	(((ep_info)>>16)&0x07ff)
+#define EP_QUEUE_HEAD_IOS			0x00008000
+#define EP_QUEUE_HEAD_NEXT_TERMINATE		0x00000001
+#define EP_QUEUE_HEAD_IOC			0x00008000
+#define EP_QUEUE_HEAD_MULTO			0x00000C00
+#define EP_QUEUE_HEAD_STATUS_HALT		0x00000040
+#define EP_QUEUE_HEAD_STATUS_ACTIVE		0x00000080
+#define EP_QUEUE_CURRENT_OFFSET_MASK		0x00000FFF
+#define EP_QUEUE_HEAD_NEXT_POINTER_MASK		0xFFFFFFE0
+#define EP_QUEUE_FRINDEX_MASK			0x000007FF
+#define EP_MAX_LENGTH_TRANSFER			0x4000
+
+struct mv_dqh {
+	/* Bits 16..26 Bit 15 is Interrupt On Setup */
+	u32	max_packet_length;
+	u32	curr_dtd_ptr;		/* Current dTD Pointer */
+	u32	next_dtd_ptr;		/* Next dTD Pointer */
+	/* Total bytes (16..30), IOC (15), INT (8), STS (0-7) */
+	u32	size_ioc_int_sts;
+	u32	buff_ptr0;		/* Buffer pointer Page 0 (12-31) */
+	u32	buff_ptr1;		/* Buffer pointer Page 1 (12-31) */
+	u32	buff_ptr2;		/* Buffer pointer Page 2 (12-31) */
+	u32	buff_ptr3;		/* Buffer pointer Page 3 (12-31) */
+	u32	buff_ptr4;		/* Buffer pointer Page 4 (12-31) */
+	u32	reserved1;
+	/* 8 bytes of setup data that follows the Setup PID */
+	u8	setup_buffer[8];
+	u32	reserved2[4];
+};
+
+
+#define DTD_NEXT_TERMINATE		(0x00000001)
+#define DTD_IOC				(0x00008000)
+#define DTD_STATUS_ACTIVE		(0x00000080)
+#define DTD_STATUS_HALTED		(0x00000040)
+#define DTD_STATUS_DATA_BUFF_ERR	(0x00000020)
+#define DTD_STATUS_TRANSACTION_ERR	(0x00000008)
+#define DTD_RESERVED_FIELDS		(0x00007F00)
+#define DTD_ERROR_MASK			(0x68)
+#define DTD_ADDR_MASK			(0xFFFFFFE0)
+#define DTD_PACKET_SIZE			0x7FFF0000
+#define DTD_LENGTH_BIT_POS		(16)
+
+struct mv_dtd {
+	u32	dtd_next;
+	u32	size_ioc_sts;
+	u32	buff_ptr0;		/* Buffer pointer Page 0 */
+	u32	buff_ptr1;		/* Buffer pointer Page 1 */
+	u32	buff_ptr2;		/* Buffer pointer Page 2 */
+	u32	buff_ptr3;		/* Buffer pointer Page 3 */
+	u32	buff_ptr4;		/* Buffer pointer Page 4 */
+	u32	scratch_ptr;
+	/* 32 bytes */
+	dma_addr_t td_dma;		/* dma address for this td */
+	struct mv_dtd *next_dtd_virt;
+};
+
+extern int mv_udc_phy_init(unsigned int base);
+
+#endif
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
new file mode 100644
index 00000000000..d5468a7f38e
--- /dev/null
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -0,0 +1,2149 @@
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+
+#include "mv_udc.h"
+
+#define DRIVER_DESC		"Marvell PXA USB Device Controller driver"
+#define DRIVER_VERSION		"8 Nov 2010"
+
+#define ep_dir(ep)	(((ep)->ep_num == 0) ? \
+				((ep)->udc->ep0_dir) : ((ep)->direction))
+
+/* timeout value -- usec */
+#define RESET_TIMEOUT		10000
+#define FLUSH_TIMEOUT		10000
+#define EPSTATUS_TIMEOUT	10000
+#define PRIME_TIMEOUT		10000
+#define READSAFE_TIMEOUT	1000
+#define DTD_TIMEOUT		1000
+
+#define LOOPS_USEC_SHIFT	4
+#define LOOPS_USEC		(1 << LOOPS_USEC_SHIFT)
+#define LOOPS(timeout)		((timeout) >> LOOPS_USEC_SHIFT)
+
+static const char driver_name[] = "mv_udc";
+static const char driver_desc[] = DRIVER_DESC;
+
+/* controller device global variable */
+static struct mv_udc	*the_controller;
+int mv_usb_otgsc;
+
+static void nuke(struct mv_ep *ep, int status);
+
+/* for endpoint 0 operations */
+static const struct usb_endpoint_descriptor mv_ep0_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	0,
+	.bmAttributes =		USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize =	EP0_MAX_PKT_SIZE,
+};
+
+static void ep0_reset(struct mv_udc *udc)
+{
+	struct mv_ep *ep;
+	u32 epctrlx;
+	int i = 0;
+
+	/* ep0 in and out */
+	for (i = 0; i < 2; i++) {
+		ep = &udc->eps[i];
+		ep->udc = udc;
+
+		/* ep0 dQH */
+		ep->dqh = &udc->ep_dqh[i];
+
+		/* configure ep0 endpoint capabilities in dQH */
+		ep->dqh->max_packet_length =
+			(EP0_MAX_PKT_SIZE << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
+			| EP_QUEUE_HEAD_IOS;
+
+		epctrlx = readl(&udc->op_regs->epctrlx[0]);
+		if (i) {	/* TX */
+			epctrlx |= EPCTRL_TX_ENABLE | EPCTRL_TX_DATA_TOGGLE_RST
+				| (USB_ENDPOINT_XFER_CONTROL
+					<< EPCTRL_TX_EP_TYPE_SHIFT);
+
+		} else {	/* RX */
+			epctrlx |= EPCTRL_RX_ENABLE | EPCTRL_RX_DATA_TOGGLE_RST
+				| (USB_ENDPOINT_XFER_CONTROL
+					<< EPCTRL_RX_EP_TYPE_SHIFT);
+		}
+
+		writel(epctrlx, &udc->op_regs->epctrlx[0]);
+	}
+}
+
+/* protocol ep0 stall, will automatically be cleared on new transaction */
+static void ep0_stall(struct mv_udc *udc)
+{
+	u32	epctrlx;
+
+	/* set TX and RX to stall */
+	epctrlx = readl(&udc->op_regs->epctrlx[0]);
+	epctrlx |= EPCTRL_RX_EP_STALL | EPCTRL_TX_EP_STALL;
+	writel(epctrlx, &udc->op_regs->epctrlx[0]);
+
+	/* update ep0 state */
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->ep0_dir = EP_DIR_OUT;
+}
+
+static int process_ep_req(struct mv_udc *udc, int index,
+	struct mv_req *curr_req)
+{
+	struct mv_dtd	*curr_dtd;
+	struct mv_dqh	*curr_dqh;
+	int td_complete, actual, remaining_length;
+	int i, direction;
+	int retval = 0;
+	u32 errors;
+
+	curr_dqh = &udc->ep_dqh[index];
+	direction = index % 2;
+
+	curr_dtd = curr_req->head;
+	td_complete = 0;
+	actual = curr_req->req.length;
+
+	for (i = 0; i < curr_req->dtd_count; i++) {
+		if (curr_dtd->size_ioc_sts & DTD_STATUS_ACTIVE) {
+			dev_dbg(&udc->dev->dev, "%s, dTD not completed\n",
+				udc->eps[index].name);
+			return 1;
+		}
+
+		errors = curr_dtd->size_ioc_sts & DTD_ERROR_MASK;
+		if (!errors) {
+			remaining_length +=
+				(curr_dtd->size_ioc_sts	& DTD_PACKET_SIZE)
+					>> DTD_LENGTH_BIT_POS;
+			actual -= remaining_length;
+		} else {
+			dev_info(&udc->dev->dev,
+				"complete_tr error: ep=%d %s: error = 0x%x\n",
+				index >> 1, direction ? "SEND" : "RECV",
+				errors);
+			if (errors & DTD_STATUS_HALTED) {
+				/* Clear the errors and Halt condition */
+				curr_dqh->size_ioc_int_sts &= ~errors;
+				retval = -EPIPE;
+			} else if (errors & DTD_STATUS_DATA_BUFF_ERR) {
+				retval = -EPROTO;
+			} else if (errors & DTD_STATUS_TRANSACTION_ERR) {
+				retval = -EILSEQ;
+			}
+		}
+		if (i != curr_req->dtd_count - 1)
+			curr_dtd = (struct mv_dtd *)curr_dtd->next_dtd_virt;
+	}
+	if (retval)
+		return retval;
+
+	curr_req->req.actual = actual;
+
+	return 0;
+}
+
+/*
+ * done() - retire a request; caller blocked irqs
+ * @status : request status to be set, only works when
+ * request is still in progress.
+ */
+static void done(struct mv_ep *ep, struct mv_req *req, int status)
+{
+	struct mv_udc *udc = NULL;
+	unsigned char stopped = ep->stopped;
+	struct mv_dtd *curr_td, *next_td;
+	int j;
+
+	udc = (struct mv_udc *)ep->udc;
+	/* Removed the req from fsl_ep->queue */
+	list_del_init(&req->queue);
+
+	/* req.status should be set as -EINPROGRESS in ep_queue() */
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	/* Free dtd for the request */
+	next_td = req->head;
+	for (j = 0; j < req->dtd_count; j++) {
+		curr_td = next_td;
+		if (j != req->dtd_count - 1)
+			next_td = curr_td->next_dtd_virt;
+		dma_pool_free(udc->dtd_pool, curr_td, curr_td->td_dma);
+	}
+
+	if (req->mapped) {
+		dma_unmap_single(ep->udc->gadget.dev.parent,
+			req->req.dma, req->req.length,
+			((ep_dir(ep) == EP_DIR_IN) ?
+				DMA_TO_DEVICE : DMA_FROM_DEVICE));
+		req->req.dma = DMA_ADDR_INVALID;
+		req->mapped = 0;
+	} else
+		dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
+			req->req.dma, req->req.length,
+			((ep_dir(ep) == EP_DIR_IN) ?
+				DMA_TO_DEVICE : DMA_FROM_DEVICE));
+
+	if (status && (status != -ESHUTDOWN))
+		dev_info(&udc->dev->dev, "complete %s req %p stat %d len %u/%u",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length);
+
+	ep->stopped = 1;
+
+	spin_unlock(&ep->udc->lock);
+	/*
+	 * complete() is from gadget layer,
+	 * eg fsg->bulk_in_complete()
+	 */
+	if (req->req.complete)
+		req->req.complete(&ep->ep, &req->req);
+
+	spin_lock(&ep->udc->lock);
+	ep->stopped = stopped;
+}
+
+static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
+{
+	u32 tmp, epstatus, bit_pos, direction;
+	struct mv_udc *udc;
+	struct mv_dqh *dqh;
+	unsigned int loops;
+	int readsafe, retval = 0;
+
+	udc = ep->udc;
+	direction = ep_dir(ep);
+	dqh = &(udc->ep_dqh[ep->ep_num * 2 + direction]);
+	bit_pos = 1 << (((direction == EP_DIR_OUT) ? 0 : 16) + ep->ep_num);
+
+	/* check if the pipe is empty */
+	if (!(list_empty(&ep->queue))) {
+		struct mv_req *lastreq;
+		lastreq = list_entry(ep->queue.prev, struct mv_req, queue);
+		lastreq->tail->dtd_next =
+			req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
+		if (readl(&udc->op_regs->epprime) & bit_pos) {
+			loops = LOOPS(PRIME_TIMEOUT);
+			while (readl(&udc->op_regs->epprime) & bit_pos) {
+				if (loops == 0) {
+					retval = -ETIME;
+					goto done;
+				}
+				udelay(LOOPS_USEC);
+				loops--;
+			}
+			if (readl(&udc->op_regs->epstatus) & bit_pos)
+				goto done;
+		}
+		readsafe = 0;
+		loops = LOOPS(READSAFE_TIMEOUT);
+		while (readsafe == 0) {
+			if (loops == 0) {
+				retval = -ETIME;
+				goto done;
+			}
+			/* start with setting the semaphores */
+			tmp = readl(&udc->op_regs->usbcmd);
+			tmp |= USBCMD_ATDTW_TRIPWIRE_SET;
+			writel(tmp, &udc->op_regs->usbcmd);
+
+			/* read the endpoint status */
+			epstatus = readl(&udc->op_regs->epstatus) & bit_pos;
+
+			/*
+			 * Reread the ATDTW semaphore bit to check if it is
+			 * cleared. When hardware see a hazard, it will clear
+			 * the bit or else we remain set to 1 and we can
+			 * proceed with priming of endpoint if not already
+			 * primed.
+			 */
+			if (readl(&udc->op_regs->usbcmd)
+				& USBCMD_ATDTW_TRIPWIRE_SET) {
+				readsafe = 1;
+			}
+			loops--;
+			udelay(LOOPS_USEC);
+		}
+
+		/* Clear the semaphore */
+		tmp = readl(&udc->op_regs->usbcmd);
+		tmp &= USBCMD_ATDTW_TRIPWIRE_CLEAR;
+		writel(tmp, &udc->op_regs->usbcmd);
+
+		/* If endpoint is not active, we activate it now. */
+		if (!epstatus) {
+			if (direction == EP_DIR_IN) {
+				struct mv_dtd *curr_dtd = dma_to_virt(
+					&udc->dev->dev, dqh->curr_dtd_ptr);
+
+				loops = LOOPS(DTD_TIMEOUT);
+				while (curr_dtd->size_ioc_sts
+					& DTD_STATUS_ACTIVE) {
+					if (loops == 0) {
+						retval = -ETIME;
+						goto done;
+					}
+					loops--;
+					udelay(LOOPS_USEC);
+				}
+			}
+			/* No other transfers on the queue */
+
+			/* Write dQH next pointer and terminate bit to 0 */
+			dqh->next_dtd_ptr = req->head->td_dma
+				& EP_QUEUE_HEAD_NEXT_POINTER_MASK;
+			dqh->size_ioc_int_sts = 0;
+
+			/*
+			 * Ensure that updates to the QH will
+			 * occure before priming.
+			 */
+			wmb();
+
+			/* Prime the Endpoint */
+			writel(bit_pos, &udc->op_regs->epprime);
+		}
+	} else {
+		/* Write dQH next pointer and terminate bit to 0 */
+		dqh->next_dtd_ptr = req->head->td_dma
+			& EP_QUEUE_HEAD_NEXT_POINTER_MASK;;
+		dqh->size_ioc_int_sts = 0;
+
+		/* Ensure that updates to the QH will occure before priming. */
+		wmb();
+
+		/* Prime the Endpoint */
+		writel(bit_pos, &udc->op_regs->epprime);
+
+		if (direction == EP_DIR_IN) {
+			/* FIXME add status check after prime the IN ep */
+			int prime_again;
+			u32 curr_dtd_ptr = dqh->curr_dtd_ptr;
+
+			loops = LOOPS(DTD_TIMEOUT);
+			prime_again = 0;
+			while ((curr_dtd_ptr != req->head->td_dma)) {
+				curr_dtd_ptr = dqh->curr_dtd_ptr;
+				if (loops == 0) {
+					dev_err(&udc->dev->dev,
+						"failed to prime %s\n",
+						ep->name);
+					retval = -ETIME;
+					goto done;
+				}
+				loops--;
+				udelay(LOOPS_USEC);
+
+				if (loops == (LOOPS(DTD_TIMEOUT) >> 2)) {
+					if (prime_again)
+						goto done;
+					dev_info(&udc->dev->dev,
+						"prime again\n");
+					writel(bit_pos,
+						&udc->op_regs->epprime);
+					prime_again = 1;
+				}
+			}
+		}
+	}
+done:
+	return retval;;
+}
+
+static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
+		dma_addr_t *dma, int *is_last)
+{
+	u32 temp;
+	struct mv_dtd *dtd;
+	struct mv_udc *udc;
+
+	/* how big will this transfer be? */
+	*length = min(req->req.length - req->req.actual,
+			(unsigned)EP_MAX_LENGTH_TRANSFER);
+
+	udc = req->ep->udc;
+
+	/*
+	 * Be careful that no _GFP_HIGHMEM is set,
+	 * or we can not use dma_to_virt
+	 */
+	dtd = dma_pool_alloc(udc->dtd_pool, GFP_KERNEL, dma);
+	if (dtd == NULL)
+		return dtd;
+
+	dtd->td_dma = *dma;
+	/* initialize buffer page pointers */
+	temp = (u32)(req->req.dma + req->req.actual);
+	dtd->buff_ptr0 = cpu_to_le32(temp);
+	temp &= ~0xFFF;
+	dtd->buff_ptr1 = cpu_to_le32(temp + 0x1000);
+	dtd->buff_ptr2 = cpu_to_le32(temp + 0x2000);
+	dtd->buff_ptr3 = cpu_to_le32(temp + 0x3000);
+	dtd->buff_ptr4 = cpu_to_le32(temp + 0x4000);
+
+	req->req.actual += *length;
+
+	/* zlp is needed if req->req.zero is set */
+	if (req->req.zero) {
+		if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
+			*is_last = 1;
+		else
+			*is_last = 0;
+	} else if (req->req.length == req->req.actual)
+		*is_last = 1;
+	else
+		*is_last = 0;
+
+	/* Fill in the transfer size; set active bit */
+	temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE);
+
+	/* Enable interrupt for the last dtd of a request */
+	if (*is_last && !req->req.no_interrupt)
+		temp |= DTD_IOC;
+
+	dtd->size_ioc_sts = temp;
+
+	mb();
+
+	return dtd;
+}
+
+/* generate dTD linked list for a request */
+static int req_to_dtd(struct mv_req *req)
+{
+	unsigned count;
+	int is_last, is_first = 1;
+	struct mv_dtd *dtd, *last_dtd = NULL;
+	struct mv_udc *udc;
+	dma_addr_t dma;
+
+	udc = req->ep->udc;
+
+	do {
+		dtd = build_dtd(req, &count, &dma, &is_last);
+		if (dtd == NULL)
+			return -ENOMEM;
+
+		if (is_first) {
+			is_first = 0;
+			req->head = dtd;
+		} else {
+			last_dtd->dtd_next = dma;
+			last_dtd->next_dtd_virt = dtd;
+		}
+		last_dtd = dtd;
+		req->dtd_count++;
+	} while (!is_last);
+
+	/* set terminate bit to 1 for the last dTD */
+	dtd->dtd_next = DTD_NEXT_TERMINATE;
+
+	req->tail = dtd;
+
+	return 0;
+}
+
+static int mv_ep_enable(struct usb_ep *_ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct mv_udc *udc;
+	struct mv_ep *ep;
+	struct mv_dqh *dqh;
+	u16 max = 0;
+	u32 bit_pos, epctrlx, direction;
+	unsigned char zlt = 0, ios = 0, mult = 0;
+
+	ep = container_of(_ep, struct mv_ep, ep);
+	udc = ep->udc;
+
+	if (!_ep || !desc || ep->desc
+			|| desc->bDescriptorType != USB_DT_ENDPOINT)
+		return -EINVAL;
+
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	direction = ep_dir(ep);
+	max = le16_to_cpu(desc->wMaxPacketSize);
+
+	/*
+	 * disable HW zero length termination select
+	 * driver handles zero length packet through req->req.zero
+	 */
+	zlt = 1;
+
+	/* Get the endpoint queue head address */
+	dqh = (struct mv_dqh *)ep->dqh;
+
+	bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);
+
+	/* Check if the Endpoint is Primed */
+	if ((readl(&udc->op_regs->epprime) & bit_pos)
+		|| (readl(&udc->op_regs->epstatus) & bit_pos)) {
+		dev_info(&udc->dev->dev,
+			"ep=%d %s: Init ERROR: ENDPTPRIME=0x%x,"
+			" ENDPTSTATUS=0x%x, bit_pos=0x%x\n",
+			(unsigned)ep->ep_num, direction ? "SEND" : "RECV",
+			(unsigned)readl(&udc->op_regs->epprime),
+			(unsigned)readl(&udc->op_regs->epstatus),
+			(unsigned)bit_pos);
+		goto en_done;
+	}
+	/* Set the max packet length, interrupt on Setup and Mult fields */
+	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_BULK:
+		zlt = 1;
+		mult = 0;
+		break;
+	case USB_ENDPOINT_XFER_CONTROL:
+		ios = 1;
+	case USB_ENDPOINT_XFER_INT:
+		mult = 0;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		/* Calculate transactions needed for high bandwidth iso */
+		mult = (unsigned char)(1 + ((max >> 11) & 0x03));
+		max = max & 0x8ff;	/* bit 0~10 */
+		/* 3 transactions at most */
+		if (mult > 3)
+			goto en_done;
+		break;
+	default:
+		goto en_done;
+	}
+	dqh->max_packet_length = (max << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
+		| (mult << EP_QUEUE_HEAD_MULT_POS)
+		| (zlt ? EP_QUEUE_HEAD_ZLT_SEL : 0)
+		| (ios ? EP_QUEUE_HEAD_IOS : 0);
+	dqh->next_dtd_ptr = 1;
+	dqh->size_ioc_int_sts = 0;
+
+	ep->ep.maxpacket = max;
+	ep->desc = desc;
+	ep->stopped = 0;
+
+	/* Enable the endpoint for Rx or Tx and set the endpoint type */
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	if (direction == EP_DIR_IN) {
+		epctrlx &= ~EPCTRL_TX_ALL_MASK;
+		epctrlx |= EPCTRL_TX_ENABLE | EPCTRL_TX_DATA_TOGGLE_RST
+			| ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+				<< EPCTRL_TX_EP_TYPE_SHIFT);
+	} else {
+		epctrlx &= ~EPCTRL_RX_ALL_MASK;
+		epctrlx |= EPCTRL_RX_ENABLE | EPCTRL_RX_DATA_TOGGLE_RST
+			| ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+				<< EPCTRL_RX_EP_TYPE_SHIFT);
+	}
+	writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+
+	/*
+	 * Implement Guideline (GL# USB-7) The unused endpoint type must
+	 * be programmed to bulk.
+	 */
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	if ((epctrlx & EPCTRL_RX_ENABLE) == 0) {
+		epctrlx |= ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+				<< EPCTRL_RX_EP_TYPE_SHIFT);
+		writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+	}
+
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	if ((epctrlx & EPCTRL_TX_ENABLE) == 0) {
+		epctrlx |= ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+				<< EPCTRL_TX_EP_TYPE_SHIFT);
+		writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+	}
+
+	return 0;
+en_done:
+	return -EINVAL;
+}
+
+static int  mv_ep_disable(struct usb_ep *_ep)
+{
+	struct mv_udc *udc;
+	struct mv_ep *ep;
+	struct mv_dqh *dqh;
+	u32 bit_pos, epctrlx, direction;
+
+	ep = container_of(_ep, struct mv_ep, ep);
+	if ((_ep == NULL) || !ep->desc)
+		return -EINVAL;
+
+	udc = ep->udc;
+
+	/* Get the endpoint queue head address */
+	dqh = ep->dqh;
+
+	direction = ep_dir(ep);
+	bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);
+
+	/* Reset the max packet length and the interrupt on Setup */
+	dqh->max_packet_length = 0;
+
+	/* Disable the endpoint for Rx or Tx and reset the endpoint type */
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	epctrlx &= ~((direction == EP_DIR_IN)
+			? (EPCTRL_TX_ENABLE | EPCTRL_TX_TYPE)
+			: (EPCTRL_RX_ENABLE | EPCTRL_RX_TYPE));
+	writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+
+	/* nuke all pending requests (does flush) */
+	nuke(ep, -ESHUTDOWN);
+
+	ep->desc = NULL;
+	ep->stopped = 1;
+	return 0;
+}
+
+static struct usb_request *
+mv_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct mv_req *req = NULL;
+
+	req = kzalloc(sizeof *req, gfp_flags);
+	if (!req)
+		return NULL;
+
+	req->req.dma = DMA_ADDR_INVALID;
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void mv_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct mv_req *req = NULL;
+
+	req = container_of(_req, struct mv_req, req);
+
+	if (_req)
+		kfree(req);
+}
+
+static void mv_ep_fifo_flush(struct usb_ep *_ep)
+{
+	struct mv_udc *udc;
+	u32 bit_pos, direction;
+	struct mv_ep *ep = container_of(_ep, struct mv_ep, ep);
+	unsigned int loops;
+
+	udc = ep->udc;
+	direction = ep_dir(ep);
+	bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);
+	/*
+	 * Flushing will halt the pipe
+	 * Write 1 to the Flush register
+	 */
+	writel(bit_pos, &udc->op_regs->epflush);
+
+	/* Wait until flushing completed */
+	loops = LOOPS(FLUSH_TIMEOUT);
+	while (readl(&udc->op_regs->epflush) & bit_pos) {
+		/*
+		 * ENDPTFLUSH bit should be cleared to indicate this
+		 * operation is complete
+		 */
+		if (loops == 0) {
+			dev_err(&udc->dev->dev,
+				"TIMEOUT for ENDPTFLUSH=0x%x, bit_pos=0x%x\n",
+				(unsigned)readl(&udc->op_regs->epflush),
+				(unsigned)bit_pos);
+			return;
+		}
+		loops--;
+		udelay(LOOPS_USEC);
+	}
+	loops = LOOPS(EPSTATUS_TIMEOUT);
+	while (readl(&udc->op_regs->epstatus) & bit_pos) {
+		unsigned int inter_loops;
+
+		if (loops == 0) {
+			dev_err(&udc->dev->dev,
+				"TIMEOUT for ENDPTSTATUS=0x%x, bit_pos=0x%x\n",
+				(unsigned)readl(&udc->op_regs->epstatus),
+				(unsigned)bit_pos);
+			return;
+		}
+		/* Write 1 to the Flush register */
+		writel(bit_pos, &udc->op_regs->epflush);
+
+		/* Wait until flushing completed */
+		inter_loops = LOOPS(FLUSH_TIMEOUT);
+		while (readl(&udc->op_regs->epflush) & bit_pos) {
+			/*
+			 * ENDPTFLUSH bit should be cleared to indicate this
+			 * operation is complete
+			 */
+			if (inter_loops == 0) {
+				dev_err(&udc->dev->dev,
+					"TIMEOUT for ENDPTFLUSH=0x%x,"
+					"bit_pos=0x%x\n",
+					(unsigned)readl(&udc->op_regs->epflush),
+					(unsigned)bit_pos);
+				return;
+			}
+			inter_loops--;
+			udelay(LOOPS_USEC);
+		}
+		loops--;
+	}
+}
+
+/* queues (submits) an I/O request to an endpoint */
+static int
+mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct mv_ep *ep = container_of(_ep, struct mv_ep, ep);
+	struct mv_req *req = container_of(_req, struct mv_req, req);
+	struct mv_udc *udc = ep->udc;
+	unsigned long flags;
+
+	/* catch various bogus parameters */
+	if (!_req || !req->req.complete || !req->req.buf
+			|| !list_empty(&req->queue)) {
+		dev_err(&udc->dev->dev, "%s, bad params", __func__);
+		return -EINVAL;
+	}
+	if (unlikely(!_ep || !ep->desc)) {
+		dev_err(&udc->dev->dev, "%s, bad ep", __func__);
+		return -EINVAL;
+	}
+	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+		if (req->req.length > ep->ep.maxpacket)
+			return -EMSGSIZE;
+	}
+
+	udc = ep->udc;
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	req->ep = ep;
+
+	/* map virtual address to hardware */
+	if (req->req.dma == DMA_ADDR_INVALID) {
+		req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
+					req->req.buf,
+					req->req.length, ep_dir(ep)
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+		req->mapped = 1;
+	} else {
+		dma_sync_single_for_device(ep->udc->gadget.dev.parent,
+					req->req.dma, req->req.length,
+					ep_dir(ep)
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+		req->mapped = 0;
+	}
+
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+	req->dtd_count = 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* build dtds and push them to device queue */
+	if (!req_to_dtd(req)) {
+		int retval;
+		retval = queue_dtd(ep, req);
+		if (retval) {
+			spin_unlock_irqrestore(&udc->lock, flags);
+			return retval;
+		}
+	} else {
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return -ENOMEM;
+	}
+
+	/* Update ep0 state */
+	if (ep->ep_num == 0)
+		udc->ep0_state = DATA_STATE_XMIT;
+
+	/* irq handler advances the queue */
+	if (req != NULL)
+		list_add_tail(&req->queue, &ep->queue);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/* dequeues (cancels, unlinks) an I/O request from an endpoint */
+static int mv_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct mv_ep *ep = container_of(_ep, struct mv_ep, ep);
+	struct mv_req *req;
+	struct mv_udc *udc = ep->udc;
+	unsigned long flags;
+	int stopped, ret = 0;
+	u32 epctrlx;
+
+	if (!_ep || !_req)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+	stopped = ep->stopped;
+
+	/* Stop the ep before we deal with the queue */
+	ep->stopped = 1;
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	if (ep_dir(ep) == EP_DIR_IN)
+		epctrlx &= ~EPCTRL_TX_ENABLE;
+	else
+		epctrlx &= ~EPCTRL_RX_ENABLE;
+	writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == _req)
+			break;
+	}
+	if (&req->req != _req) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* The request is in progress, or completed but not dequeued */
+	if (ep->queue.next == &req->queue) {
+		_req->status = -ECONNRESET;
+		mv_ep_fifo_flush(_ep);	/* flush current transfer */
+
+		/* The request isn't the last request in this ep queue */
+		if (req->queue.next != &ep->queue) {
+			struct mv_dqh *qh;
+			struct mv_req *next_req;
+
+			qh = ep->dqh;
+			next_req = list_entry(req->queue.next, struct mv_req,
+					queue);
+
+			/* Point the QH to the first TD of next request */
+			writel((u32) next_req->head, &qh->curr_dtd_ptr);
+		} else {
+			struct mv_dqh *qh;
+
+			qh = ep->dqh;
+			qh->next_dtd_ptr = 1;
+			qh->size_ioc_int_sts = 0;
+		}
+
+		/* The request hasn't been processed, patch up the TD chain */
+	} else {
+		struct mv_req *prev_req;
+
+		prev_req = list_entry(req->queue.prev, struct mv_req, queue);
+		writel(readl(&req->tail->dtd_next),
+				&prev_req->tail->dtd_next);
+
+	}
+
+	done(ep, req, -ECONNRESET);
+
+	/* Enable EP */
+out:
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	if (ep_dir(ep) == EP_DIR_IN)
+		epctrlx |= EPCTRL_TX_ENABLE;
+	else
+		epctrlx |= EPCTRL_RX_ENABLE;
+	writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+	ep->stopped = stopped;
+
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+	return ret;
+}
+
+static void ep_set_stall(struct mv_udc *udc, u8 ep_num, u8 direction, int stall)
+{
+	u32 epctrlx;
+
+	epctrlx = readl(&udc->op_regs->epctrlx[ep_num]);
+
+	if (stall) {
+		if (direction == EP_DIR_IN)
+			epctrlx |= EPCTRL_TX_EP_STALL;
+		else
+			epctrlx |= EPCTRL_RX_EP_STALL;
+	} else {
+		if (direction == EP_DIR_IN) {
+			epctrlx &= ~EPCTRL_TX_EP_STALL;
+			epctrlx |= EPCTRL_TX_DATA_TOGGLE_RST;
+		} else {
+			epctrlx &= ~EPCTRL_RX_EP_STALL;
+			epctrlx |= EPCTRL_RX_DATA_TOGGLE_RST;
+		}
+	}
+	writel(epctrlx, &udc->op_regs->epctrlx[ep_num]);
+}
+
+static int ep_is_stall(struct mv_udc *udc, u8 ep_num, u8 direction)
+{
+	u32 epctrlx;
+
+	epctrlx = readl(&udc->op_regs->epctrlx[ep_num]);
+
+	if (direction == EP_DIR_OUT)
+		return (epctrlx & EPCTRL_RX_EP_STALL) ? 1 : 0;
+	else
+		return (epctrlx & EPCTRL_TX_EP_STALL) ? 1 : 0;
+}
+
+static int mv_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge)
+{
+	struct mv_ep *ep;
+	unsigned long flags = 0;
+	int status = 0;
+	struct mv_udc *udc;
+
+	ep = container_of(_ep, struct mv_ep, ep);
+	udc = ep->udc;
+	if (!_ep || !ep->desc) {
+		status = -EINVAL;
+		goto out;
+	}
+
+	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+		status = -EOPNOTSUPP;
+		goto out;
+	}
+
+	/*
+	 * Attempt to halt IN ep will fail if any transfer requests
+	 * are still queue
+	 */
+	if (halt && (ep_dir(ep) == EP_DIR_IN) && !list_empty(&ep->queue)) {
+		status = -EAGAIN;
+		goto out;
+	}
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+	ep_set_stall(udc, ep->ep_num, ep_dir(ep), halt);
+	if (halt && wedge)
+		ep->wedge = 1;
+	else if (!halt)
+		ep->wedge = 0;
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+
+	if (ep->ep_num == 0) {
+		udc->ep0_state = WAIT_FOR_SETUP;
+		udc->ep0_dir = EP_DIR_OUT;
+	}
+out:
+	return status;
+}
+
+static int mv_ep_set_halt(struct usb_ep *_ep, int halt)
+{
+	return mv_ep_set_halt_wedge(_ep, halt, 0);
+}
+
+static int mv_ep_set_wedge(struct usb_ep *_ep)
+{
+	return mv_ep_set_halt_wedge(_ep, 1, 1);
+}
+
+static struct usb_ep_ops mv_ep_ops = {
+	.enable		= mv_ep_enable,
+	.disable	= mv_ep_disable,
+
+	.alloc_request	= mv_alloc_request,
+	.free_request	= mv_free_request,
+
+	.queue		= mv_ep_queue,
+	.dequeue	= mv_ep_dequeue,
+
+	.set_wedge	= mv_ep_set_wedge,
+	.set_halt	= mv_ep_set_halt,
+	.fifo_flush	= mv_ep_fifo_flush,	/* flush fifo */
+};
+
+static void udc_stop(struct mv_udc *udc)
+{
+	u32 tmp;
+
+	/* Disable interrupts */
+	tmp = readl(&udc->op_regs->usbintr);
+	tmp &= ~(USBINTR_INT_EN | USBINTR_ERR_INT_EN |
+		USBINTR_PORT_CHANGE_DETECT_EN | USBINTR_RESET_EN);
+	writel(tmp, &udc->op_regs->usbintr);
+
+	/* Reset the Run the bit in the command register to stop VUSB */
+	tmp = readl(&udc->op_regs->usbcmd);
+	tmp &= ~USBCMD_RUN_STOP;
+	writel(tmp, &udc->op_regs->usbcmd);
+}
+
+static void udc_start(struct mv_udc *udc)
+{
+	u32 usbintr;
+
+	usbintr = USBINTR_INT_EN | USBINTR_ERR_INT_EN
+		| USBINTR_PORT_CHANGE_DETECT_EN
+		| USBINTR_RESET_EN | USBINTR_DEVICE_SUSPEND;
+	/* Enable interrupts */
+	writel(usbintr, &udc->op_regs->usbintr);
+
+	/* Set the Run bit in the command register */
+	writel(USBCMD_RUN_STOP, &udc->op_regs->usbcmd);
+}
+
+static int udc_reset(struct mv_udc *udc)
+{
+	unsigned int loops;
+	u32 tmp, portsc;
+
+	/* Stop the controller */
+	tmp = readl(&udc->op_regs->usbcmd);
+	tmp &= ~USBCMD_RUN_STOP;
+	writel(tmp, &udc->op_regs->usbcmd);
+
+	/* Reset the controller to get default values */
+	writel(USBCMD_CTRL_RESET, &udc->op_regs->usbcmd);
+
+	/* wait for reset to complete */
+	loops = LOOPS(RESET_TIMEOUT);
+	while (readl(&udc->op_regs->usbcmd) & USBCMD_CTRL_RESET) {
+		if (loops == 0) {
+			dev_err(&udc->dev->dev,
+				"Wait for RESET completed TIMEOUT\n");
+			return -ETIMEDOUT;
+		}
+		loops--;
+		udelay(LOOPS_USEC);
+	}
+
+	/* set controller to device mode */
+	tmp = readl(&udc->op_regs->usbmode);
+	tmp |= USBMODE_CTRL_MODE_DEVICE;
+
+	/* turn setup lockout off, require setup tripwire in usbcmd */
+	tmp |= USBMODE_SETUP_LOCK_OFF | USBMODE_STREAM_DISABLE;
+
+	writel(tmp, &udc->op_regs->usbmode);
+
+	writel(0x0, &udc->op_regs->epsetupstat);
+
+	/* Configure the Endpoint List Address */
+	writel(udc->ep_dqh_dma & USB_EP_LIST_ADDRESS_MASK,
+		&udc->op_regs->eplistaddr);
+
+	portsc = readl(&udc->op_regs->portsc[0]);
+	if (readl(&udc->cap_regs->hcsparams) & HCSPARAMS_PPC)
+		portsc &= (~PORTSCX_W1C_BITS | ~PORTSCX_PORT_POWER);
+
+	if (udc->force_fs)
+		portsc |= PORTSCX_FORCE_FULL_SPEED_CONNECT;
+	else
+		portsc &= (~PORTSCX_FORCE_FULL_SPEED_CONNECT);
+
+	writel(portsc, &udc->op_regs->portsc[0]);
+
+	tmp = readl(&udc->op_regs->epctrlx[0]);
+	tmp &= ~(EPCTRL_TX_EP_STALL | EPCTRL_RX_EP_STALL);
+	writel(tmp, &udc->op_regs->epctrlx[0]);
+
+	return 0;
+}
+
+static int mv_udc_get_frame(struct usb_gadget *gadget)
+{
+	struct mv_udc *udc;
+	u16	retval;
+
+	if (!gadget)
+		return -ENODEV;
+
+	udc = container_of(gadget, struct mv_udc, gadget);
+
+	retval = readl(udc->op_regs->frindex) & USB_FRINDEX_MASKS;
+
+	return retval;
+}
+
+/* Tries to wake up the host connected to this gadget */
+static int mv_udc_wakeup(struct usb_gadget *gadget)
+{
+	struct mv_udc *udc = container_of(gadget, struct mv_udc, gadget);
+	u32 portsc;
+
+	/* Remote wakeup feature not enabled by host */
+	if (!udc->remote_wakeup)
+		return -ENOTSUPP;
+
+	portsc = readl(&udc->op_regs->portsc);
+	/* not suspended? */
+	if (!(portsc & PORTSCX_PORT_SUSPEND))
+		return 0;
+	/* trigger force resume */
+	portsc |= PORTSCX_PORT_FORCE_RESUME;
+	writel(portsc, &udc->op_regs->portsc[0]);
+	return 0;
+}
+
+static int mv_udc_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct mv_udc *udc;
+	unsigned long flags;
+
+	udc = container_of(gadget, struct mv_udc, gadget);
+	spin_lock_irqsave(&udc->lock, flags);
+
+	udc->softconnect = (is_on != 0);
+	if (udc->driver && udc->softconnect)
+		udc_start(udc);
+	else
+		udc_stop(udc);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/* device controller usb_gadget_ops structure */
+static const struct usb_gadget_ops mv_ops = {
+
+	/* returns the current frame number */
+	.get_frame	= mv_udc_get_frame,
+
+	/* tries to wake up the host connected to this gadget */
+	.wakeup		= mv_udc_wakeup,
+
+	/* D+ pullup, software-controlled connect/disconnect to USB host */
+	.pullup		= mv_udc_pullup,
+};
+
+static void mv_udc_testmode(struct mv_udc *udc, u16 index, bool enter)
+{
+	dev_info(&udc->dev->dev, "Test Mode is not support yet\n");
+}
+
+static int eps_init(struct mv_udc *udc)
+{
+	struct mv_ep	*ep;
+	char name[14];
+	int i;
+
+	/* initialize ep0 */
+	ep = &udc->eps[0];
+	ep->udc = udc;
+	strncpy(ep->name, "ep0", sizeof(ep->name));
+	ep->ep.name = ep->name;
+	ep->ep.ops = &mv_ep_ops;
+	ep->wedge = 0;
+	ep->stopped = 0;
+	ep->ep.maxpacket = EP0_MAX_PKT_SIZE;
+	ep->ep_num = 0;
+	ep->desc = &mv_ep0_desc;
+	INIT_LIST_HEAD(&ep->queue);
+
+	ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
+
+	/* initialize other endpoints */
+	for (i = 2; i < udc->max_eps * 2; i++) {
+		ep = &udc->eps[i];
+		if (i % 2) {
+			snprintf(name, sizeof(name), "ep%din", i / 2);
+			ep->direction = EP_DIR_IN;
+		} else {
+			snprintf(name, sizeof(name), "ep%dout", i / 2);
+			ep->direction = EP_DIR_OUT;
+		}
+		ep->udc = udc;
+		strncpy(ep->name, name, sizeof(ep->name));
+		ep->ep.name = ep->name;
+
+		ep->ep.ops = &mv_ep_ops;
+		ep->stopped = 0;
+		ep->ep.maxpacket = (unsigned short) ~0;
+		ep->ep_num = i / 2;
+
+		INIT_LIST_HEAD(&ep->queue);
+		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+
+		ep->dqh = &udc->ep_dqh[i];
+	}
+
+	return 0;
+}
+
+/* delete all endpoint requests, called with spinlock held */
+static void nuke(struct mv_ep *ep, int status)
+{
+	/* called with spinlock held */
+	ep->stopped = 1;
+
+	/* endpoint fifo flush */
+	mv_ep_fifo_flush(&ep->ep);
+
+	while (!list_empty(&ep->queue)) {
+		struct mv_req *req = NULL;
+		req = list_entry(ep->queue.next, struct mv_req, queue);
+		done(ep, req, status);
+	}
+}
+
+/* stop all USB activities */
+static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver)
+{
+	struct mv_ep	*ep;
+
+	nuke(&udc->eps[0], -ESHUTDOWN);
+
+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
+		nuke(ep, -ESHUTDOWN);
+	}
+
+	/* report disconnect; the driver is already quiesced */
+	if (driver) {
+		spin_unlock(&udc->lock);
+		driver->disconnect(&udc->gadget);
+		spin_lock(&udc->lock);
+	}
+}
+
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *))
+{
+	struct mv_udc *udc = the_controller;
+	int retval = 0;
+	unsigned long flags;
+
+	if (!udc)
+		return -ENODEV;
+
+	if (udc->driver)
+		return -EBUSY;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* hook up the driver ... */
+	driver->driver.bus = NULL;
+	udc->driver = driver;
+	udc->gadget.dev.driver = &driver->driver;
+
+	udc->usb_state = USB_STATE_ATTACHED;
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->ep0_dir = USB_DIR_OUT;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	retval = bind(&udc->gadget);
+	if (retval) {
+		dev_err(&udc->dev->dev, "bind to driver %s --> %d\n",
+				driver->driver.name, retval);
+		udc->driver = NULL;
+		udc->gadget.dev.driver = NULL;
+		return retval;
+	}
+	udc_reset(udc);
+	ep0_reset(udc);
+	udc_start(udc);
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_probe_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct mv_udc *udc = the_controller;
+	unsigned long flags;
+
+	if (!udc)
+		return -ENODEV;
+
+	udc_stop(udc);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* stop all usb activities */
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	stop_activity(udc, driver);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	/* unbind gadget driver */
+	driver->unbind(&udc->gadget);
+	udc->gadget.dev.driver = NULL;
+	udc->driver = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+static int
+udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty)
+{
+	int retval = 0;
+	struct mv_req *req;
+	struct mv_ep *ep;
+
+	ep = &udc->eps[0];
+	udc->ep0_dir = direction;
+
+	req = udc->status_req;
+
+	/* fill in the reqest structure */
+	if (empty == false) {
+		*((u16 *) req->req.buf) = cpu_to_le16(status);
+		req->req.length = 2;
+	} else
+		req->req.length = 0;
+
+	req->ep = ep;
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+	req->req.complete = NULL;
+	req->dtd_count = 0;
+
+	/* prime the data phase */
+	if (!req_to_dtd(req))
+		retval = queue_dtd(ep, req);
+	else{	/* no mem */
+		retval = -ENOMEM;
+		goto out;
+	}
+
+	if (retval) {
+		dev_err(&udc->dev->dev, "response error on GET_STATUS request\n");
+		goto out;
+	}
+
+	list_add_tail(&req->queue, &ep->queue);
+
+	return 0;
+out:
+	return retval;
+}
+
+static void ch9setaddress(struct mv_udc *udc, struct usb_ctrlrequest *setup)
+{
+	udc->dev_addr = (u8)setup->wValue;
+
+	/* update usb state */
+	udc->usb_state = USB_STATE_ADDRESS;
+
+	if (udc_prime_status(udc, EP_DIR_IN, 0, true))
+		ep0_stall(udc);
+}
+
+static void ch9getstatus(struct mv_udc *udc, u8 ep_num,
+	struct usb_ctrlrequest *setup)
+{
+	u16 status;
+	int retval;
+
+	if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
+		!= (USB_DIR_IN | USB_TYPE_STANDARD))
+		return;
+
+	if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
+		status = 1 << USB_DEVICE_SELF_POWERED;
+		status |= udc->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+	} else if ((setup->bRequestType & USB_RECIP_MASK)
+			== USB_RECIP_INTERFACE) {
+		/* get interface status */
+		status = 0;
+	} else if ((setup->bRequestType & USB_RECIP_MASK)
+			== USB_RECIP_ENDPOINT) {
+		u8 ep_num, direction;
+
+		ep_num = setup->wIndex & USB_ENDPOINT_NUMBER_MASK;
+		direction = (setup->wIndex & USB_ENDPOINT_DIR_MASK)
+				? EP_DIR_IN : EP_DIR_OUT;
+		status = ep_is_stall(udc, ep_num, direction)
+				<< USB_ENDPOINT_HALT;
+	}
+
+	retval = udc_prime_status(udc, EP_DIR_IN, status, false);
+	if (retval)
+		ep0_stall(udc);
+}
+
+static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup)
+{
+	u8 ep_num;
+	u8 direction;
+	struct mv_ep *ep;
+
+	if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK))
+		== ((USB_TYPE_STANDARD | USB_RECIP_DEVICE))) {
+		switch (setup->wValue) {
+		case USB_DEVICE_REMOTE_WAKEUP:
+			udc->remote_wakeup = 0;
+			break;
+		case USB_DEVICE_TEST_MODE:
+			mv_udc_testmode(udc, 0, false);
+			break;
+		default:
+			goto out;
+		}
+	} else if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK))
+		== ((USB_TYPE_STANDARD | USB_RECIP_ENDPOINT))) {
+		switch (setup->wValue) {
+		case USB_ENDPOINT_HALT:
+			ep_num = setup->wIndex & USB_ENDPOINT_NUMBER_MASK;
+			direction = (setup->wIndex & USB_ENDPOINT_DIR_MASK)
+				? EP_DIR_IN : EP_DIR_OUT;
+			if (setup->wValue != 0 || setup->wLength != 0
+				|| ep_num > udc->max_eps)
+				goto out;
+			ep = &udc->eps[ep_num * 2 + direction];
+			if (ep->wedge == 1)
+				break;
+			spin_unlock(&udc->lock);
+			ep_set_stall(udc, ep_num, direction, 0);
+			spin_lock(&udc->lock);
+			break;
+		default:
+			goto out;
+		}
+	} else
+		goto out;
+
+	if (udc_prime_status(udc, EP_DIR_IN, 0, true))
+		ep0_stall(udc);
+	else
+		udc->ep0_state = DATA_STATE_XMIT;
+out:
+	return;
+}
+
+static void ch9setfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup)
+{
+	u8 ep_num;
+	u8 direction;
+
+	if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK))
+		== ((USB_TYPE_STANDARD | USB_RECIP_DEVICE))) {
+		switch (setup->wValue) {
+		case USB_DEVICE_REMOTE_WAKEUP:
+			udc->remote_wakeup = 1;
+			break;
+		case USB_DEVICE_TEST_MODE:
+			if (setup->wIndex & 0xFF
+				&& udc->gadget.speed != USB_SPEED_HIGH)
+				goto out;
+			if (udc->usb_state == USB_STATE_CONFIGURED
+				|| udc->usb_state == USB_STATE_ADDRESS
+				|| udc->usb_state == USB_STATE_DEFAULT)
+				mv_udc_testmode(udc,
+					setup->wIndex & 0xFF00, true);
+			else
+				goto out;
+			break;
+		default:
+			goto out;
+		}
+	} else if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK))
+		== ((USB_TYPE_STANDARD | USB_RECIP_ENDPOINT))) {
+		switch (setup->wValue) {
+		case USB_ENDPOINT_HALT:
+			ep_num = setup->wIndex & USB_ENDPOINT_NUMBER_MASK;
+			direction = (setup->wIndex & USB_ENDPOINT_DIR_MASK)
+				? EP_DIR_IN : EP_DIR_OUT;
+			if (setup->wValue != 0 || setup->wLength != 0
+				|| ep_num > udc->max_eps)
+				goto out;
+			spin_unlock(&udc->lock);
+			ep_set_stall(udc, ep_num, direction, 1);
+			spin_lock(&udc->lock);
+			break;
+		default:
+			goto out;
+		}
+	} else
+		goto out;
+
+	if (udc_prime_status(udc, EP_DIR_IN, 0, true))
+		ep0_stall(udc);
+out:
+	return;
+}
+
+static void handle_setup_packet(struct mv_udc *udc, u8 ep_num,
+	struct usb_ctrlrequest *setup)
+{
+	bool delegate = false;
+
+	nuke(&udc->eps[ep_num * 2 + EP_DIR_OUT], -ESHUTDOWN);
+
+	dev_dbg(&udc->dev->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+			setup->bRequestType, setup->bRequest,
+			setup->wValue, setup->wIndex, setup->wLength);
+	/* We process some stardard setup requests here */
+	if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (setup->bRequest) {
+		case USB_REQ_GET_STATUS:
+			ch9getstatus(udc, ep_num, setup);
+			break;
+
+		case USB_REQ_SET_ADDRESS:
+			ch9setaddress(udc, setup);
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+			ch9clearfeature(udc, setup);
+			break;
+
+		case USB_REQ_SET_FEATURE:
+			ch9setfeature(udc, setup);
+			break;
+
+		default:
+			delegate = true;
+		}
+	} else
+		delegate = true;
+
+	/* delegate USB standard requests to the gadget driver */
+	if (delegate == true) {
+		/* USB requests handled by gadget */
+		if (setup->wLength) {
+			/* DATA phase from gadget, STATUS phase from udc */
+			udc->ep0_dir = (setup->bRequestType & USB_DIR_IN)
+					?  EP_DIR_IN : EP_DIR_OUT;
+			spin_unlock(&udc->lock);
+			if (udc->driver->setup(&udc->gadget,
+				&udc->local_setup_buff) < 0)
+				ep0_stall(udc);
+			spin_lock(&udc->lock);
+			udc->ep0_state = (setup->bRequestType & USB_DIR_IN)
+					?  DATA_STATE_XMIT : DATA_STATE_RECV;
+		} else {
+			/* no DATA phase, IN STATUS phase from gadget */
+			udc->ep0_dir = EP_DIR_IN;
+			spin_unlock(&udc->lock);
+			if (udc->driver->setup(&udc->gadget,
+				&udc->local_setup_buff) < 0)
+				ep0_stall(udc);
+			spin_lock(&udc->lock);
+			udc->ep0_state = WAIT_FOR_OUT_STATUS;
+		}
+	}
+}
+
+/* complete DATA or STATUS phase of ep0 prime status phase if needed */
+static void ep0_req_complete(struct mv_udc *udc,
+	struct mv_ep *ep0, struct mv_req *req)
+{
+	u32 new_addr;
+
+	if (udc->usb_state == USB_STATE_ADDRESS) {
+		/* set the new address */
+		new_addr = (u32)udc->dev_addr;
+		writel(new_addr << USB_DEVICE_ADDRESS_BIT_SHIFT,
+			&udc->op_regs->deviceaddr);
+	}
+
+	done(ep0, req, 0);
+
+	switch (udc->ep0_state) {
+	case DATA_STATE_XMIT:
+		/* receive status phase */
+		if (udc_prime_status(udc, EP_DIR_OUT, 0, true))
+			ep0_stall(udc);
+		break;
+	case DATA_STATE_RECV:
+		/* send status phase */
+		if (udc_prime_status(udc, EP_DIR_IN, 0 , true))
+			ep0_stall(udc);
+		break;
+	case WAIT_FOR_OUT_STATUS:
+		udc->ep0_state = WAIT_FOR_SETUP;
+		break;
+	case WAIT_FOR_SETUP:
+		dev_err(&udc->dev->dev, "unexpect ep0 packets\n");
+		break;
+	default:
+		ep0_stall(udc);
+		break;
+	}
+}
+
+static void get_setup_data(struct mv_udc *udc, u8 ep_num, u8 *buffer_ptr)
+{
+	u32 temp;
+	struct mv_dqh *dqh;
+
+	dqh = &udc->ep_dqh[ep_num * 2 + EP_DIR_OUT];
+
+	/* Clear bit in ENDPTSETUPSTAT */
+	temp = readl(&udc->op_regs->epsetupstat);
+	writel(temp | (1 << ep_num), &udc->op_regs->epsetupstat);
+
+	/* while a hazard exists when setup package arrives */
+	do {
+		/* Set Setup Tripwire */
+		temp = readl(&udc->op_regs->usbcmd);
+		writel(temp | USBCMD_SETUP_TRIPWIRE_SET, &udc->op_regs->usbcmd);
+
+		/* Copy the setup packet to local buffer */
+		memcpy(buffer_ptr, (u8 *) dqh->setup_buffer, 8);
+	} while (!(readl(&udc->op_regs->usbcmd) & USBCMD_SETUP_TRIPWIRE_SET));
+
+	/* Clear Setup Tripwire */
+	temp = readl(&udc->op_regs->usbcmd);
+	writel(temp & ~USBCMD_SETUP_TRIPWIRE_SET, &udc->op_regs->usbcmd);
+}
+
+static void irq_process_tr_complete(struct mv_udc *udc)
+{
+	u32 tmp, bit_pos;
+	int i, ep_num = 0, direction = 0;
+	struct mv_ep	*curr_ep;
+	struct mv_req *curr_req, *temp_req;
+	int status;
+
+	/*
+	 * We use separate loops for ENDPTSETUPSTAT and ENDPTCOMPLETE
+	 * because the setup packets are to be read ASAP
+	 */
+
+	/* Process all Setup packet received interrupts */
+	tmp = readl(&udc->op_regs->epsetupstat);
+
+	if (tmp) {
+		for (i = 0; i < udc->max_eps; i++) {
+			if (tmp & (1 << i)) {
+				get_setup_data(udc, i,
+					(u8 *)(&udc->local_setup_buff));
+				handle_setup_packet(udc, i,
+					&udc->local_setup_buff);
+			}
+		}
+	}
+
+	/* Don't clear the endpoint setup status register here.
+	 * It is cleared as a setup packet is read out of the buffer
+	 */
+
+	/* Process non-setup transaction complete interrupts */
+	tmp = readl(&udc->op_regs->epcomplete);
+
+	if (!tmp)
+		return;
+
+	writel(tmp, &udc->op_regs->epcomplete);
+
+	for (i = 0; i < udc->max_eps * 2; i++) {
+		ep_num = i >> 1;
+		direction = i % 2;
+
+		bit_pos = 1 << (ep_num + 16 * direction);
+
+		if (!(bit_pos & tmp))
+			continue;
+
+		if (i == 1)
+			curr_ep = &udc->eps[0];
+		else
+			curr_ep = &udc->eps[i];
+		/* process the req queue until an uncomplete request */
+		list_for_each_entry_safe(curr_req, temp_req,
+			&curr_ep->queue, queue) {
+			status = process_ep_req(udc, i, curr_req);
+			if (status)
+				break;
+
+			/* write back status to req */
+			curr_req->req.status = status;
+
+			/* ep0 request completion */
+			if (ep_num == 0) {
+				ep0_req_complete(udc, curr_ep, curr_req);
+				break;
+			} else {
+				done(curr_ep, curr_req, status);
+			}
+		}
+	}
+}
+
+void irq_process_reset(struct mv_udc *udc)
+{
+	u32 tmp;
+	unsigned int loops;
+
+	udc->ep0_dir = EP_DIR_OUT;
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->remote_wakeup = 0;		/* default to 0 on reset */
+
+	/* The address bits are past bit 25-31. Set the address */
+	tmp = readl(&udc->op_regs->deviceaddr);
+	tmp &= ~(USB_DEVICE_ADDRESS_MASK);
+	writel(tmp, &udc->op_regs->deviceaddr);
+
+	/* Clear all the setup token semaphores */
+	tmp = readl(&udc->op_regs->epsetupstat);
+	writel(tmp, &udc->op_regs->epsetupstat);
+
+	/* Clear all the endpoint complete status bits */
+	tmp = readl(&udc->op_regs->epcomplete);
+	writel(tmp, &udc->op_regs->epcomplete);
+
+	/* wait until all endptprime bits cleared */
+	loops = LOOPS(PRIME_TIMEOUT);
+	while (readl(&udc->op_regs->epprime) & 0xFFFFFFFF) {
+		if (loops == 0) {
+			dev_err(&udc->dev->dev,
+				"Timeout for ENDPTPRIME = 0x%x\n",
+				readl(&udc->op_regs->epprime));
+			break;
+		}
+		loops--;
+		udelay(LOOPS_USEC);
+	}
+
+	/* Write 1s to the Flush register */
+	writel((u32)~0, &udc->op_regs->epflush);
+
+	if (readl(&udc->op_regs->portsc[0]) & PORTSCX_PORT_RESET) {
+		dev_info(&udc->dev->dev, "usb bus reset\n");
+		udc->usb_state = USB_STATE_DEFAULT;
+		/* reset all the queues, stop all USB activities */
+		stop_activity(udc, udc->driver);
+	} else {
+		dev_info(&udc->dev->dev, "USB reset portsc 0x%x\n",
+			readl(&udc->op_regs->portsc));
+
+		/*
+		 * re-initialize
+		 * controller reset
+		 */
+		udc_reset(udc);
+
+		/* reset all the queues, stop all USB activities */
+		stop_activity(udc, udc->driver);
+
+		/* reset ep0 dQH and endptctrl */
+		ep0_reset(udc);
+
+		/* enable interrupt and set controller to run state */
+		udc_start(udc);
+
+		udc->usb_state = USB_STATE_ATTACHED;
+	}
+}
+
+static void handle_bus_resume(struct mv_udc *udc)
+{
+	udc->usb_state = udc->resume_state;
+	udc->resume_state = 0;
+
+	/* report resume to the driver */
+	if (udc->driver) {
+		if (udc->driver->resume) {
+			spin_unlock(&udc->lock);
+			udc->driver->resume(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+}
+
+static void irq_process_suspend(struct mv_udc *udc)
+{
+	udc->resume_state = udc->usb_state;
+	udc->usb_state = USB_STATE_SUSPENDED;
+
+	if (udc->driver->suspend) {
+		spin_unlock(&udc->lock);
+		udc->driver->suspend(&udc->gadget);
+		spin_lock(&udc->lock);
+	}
+}
+
+static void irq_process_port_change(struct mv_udc *udc)
+{
+	u32 portsc;
+
+	portsc = readl(&udc->op_regs->portsc[0]);
+	if (!(portsc & PORTSCX_PORT_RESET)) {
+		/* Get the speed */
+		u32 speed = portsc & PORTSCX_PORT_SPEED_MASK;
+		switch (speed) {
+		case PORTSCX_PORT_SPEED_HIGH:
+			udc->gadget.speed = USB_SPEED_HIGH;
+			break;
+		case PORTSCX_PORT_SPEED_FULL:
+			udc->gadget.speed = USB_SPEED_FULL;
+			break;
+		case PORTSCX_PORT_SPEED_LOW:
+			udc->gadget.speed = USB_SPEED_LOW;
+			break;
+		default:
+			udc->gadget.speed = USB_SPEED_UNKNOWN;
+			break;
+		}
+	}
+
+	if (portsc & PORTSCX_PORT_SUSPEND) {
+		udc->resume_state = udc->usb_state;
+		udc->usb_state = USB_STATE_SUSPENDED;
+		if (udc->driver->suspend) {
+			spin_unlock(&udc->lock);
+			udc->driver->suspend(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+
+	if (!(portsc & PORTSCX_PORT_SUSPEND)
+		&& udc->usb_state == USB_STATE_SUSPENDED) {
+		handle_bus_resume(udc);
+	}
+
+	if (!udc->resume_state)
+		udc->usb_state = USB_STATE_DEFAULT;
+}
+
+static void irq_process_error(struct mv_udc *udc)
+{
+	/* Increment the error count */
+	udc->errors++;
+}
+
+static irqreturn_t mv_udc_irq(int irq, void *dev)
+{
+	struct mv_udc *udc = (struct mv_udc *)dev;
+	u32 status, intr;
+
+	spin_lock(&udc->lock);
+
+	status = readl(&udc->op_regs->usbsts);
+	intr = readl(&udc->op_regs->usbintr);
+	status &= intr;
+
+	if (status == 0) {
+		spin_unlock(&udc->lock);
+		return IRQ_NONE;
+	}
+
+	/* Clear all the interrupts occured */
+	writel(status, &udc->op_regs->usbsts);
+
+	if (status & USBSTS_ERR)
+		irq_process_error(udc);
+
+	if (status & USBSTS_RESET)
+		irq_process_reset(udc);
+
+	if (status & USBSTS_PORT_CHANGE)
+		irq_process_port_change(udc);
+
+	if (status & USBSTS_INT)
+		irq_process_tr_complete(udc);
+
+	if (status & USBSTS_SUSPEND)
+		irq_process_suspend(udc);
+
+	spin_unlock(&udc->lock);
+
+	return IRQ_HANDLED;
+}
+
+/* release device structure */
+static void gadget_release(struct device *_dev)
+{
+	struct mv_udc *udc = the_controller;
+
+	complete(udc->done);
+	kfree(udc);
+}
+
+static int mv_udc_remove(struct platform_device *dev)
+{
+	struct mv_udc *udc = the_controller;
+
+	DECLARE_COMPLETION(done);
+
+	udc->done = &done;
+
+	/* free memory allocated in probe */
+	if (udc->dtd_pool)
+		dma_pool_destroy(udc->dtd_pool);
+
+	if (udc->ep_dqh)
+		dma_free_coherent(&dev->dev, udc->ep_dqh_size,
+			udc->ep_dqh, udc->ep_dqh_dma);
+
+	kfree(udc->eps);
+
+	if (udc->irq)
+		free_irq(udc->irq, &dev->dev);
+
+	if (udc->cap_regs)
+		iounmap(udc->cap_regs);
+	udc->cap_regs = NULL;
+
+	if (udc->phy_regs)
+		iounmap((void *)udc->phy_regs);
+	udc->phy_regs = 0;
+
+	if (udc->status_req) {
+		kfree(udc->status_req->req.buf);
+		kfree(udc->status_req);
+	}
+
+	device_unregister(&udc->gadget.dev);
+
+	/* free dev, wait for the release() finished */
+	wait_for_completion(&done);
+
+	the_controller = NULL;
+
+	return 0;
+}
+
+int mv_udc_probe(struct platform_device *dev)
+{
+	struct mv_udc *udc;
+	int retval = 0;
+	struct resource *r;
+	size_t size;
+
+	udc = kzalloc(sizeof *udc, GFP_KERNEL);
+	if (udc == NULL) {
+		dev_err(&dev->dev, "failed to allocate memory for udc\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	spin_lock_init(&udc->lock);
+
+	udc->dev = dev;
+
+	udc->clk = clk_get(&dev->dev, "U2OCLK");
+	if (IS_ERR(udc->clk)) {
+		retval = PTR_ERR(udc->clk);
+		goto error;
+	}
+
+	r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "u2o");
+	if (r == NULL) {
+		dev_err(&dev->dev, "no I/O memory resource defined\n");
+		retval = -ENODEV;
+		goto error;
+	}
+
+	udc->cap_regs = (struct mv_cap_regs __iomem *)
+		ioremap(r->start, resource_size(r));
+	if (udc->cap_regs == NULL) {
+		dev_err(&dev->dev, "failed to map I/O memory\n");
+		retval = -EBUSY;
+		goto error;
+	}
+
+	r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "u2ophy");
+	if (r == NULL) {
+		dev_err(&dev->dev, "no phy I/O memory resource defined\n");
+		retval = -ENODEV;
+		goto error;
+	}
+
+	udc->phy_regs = (unsigned int)ioremap(r->start, resource_size(r));
+	if (udc->phy_regs == 0) {
+		dev_err(&dev->dev, "failed to map phy I/O memory\n");
+		retval = -EBUSY;
+		goto error;
+	}
+
+	/* we will acces controller register, so enable the clk */
+	clk_enable(udc->clk);
+	retval = mv_udc_phy_init(udc->phy_regs);
+	if (retval) {
+		dev_err(&dev->dev, "phy initialization error %d\n", retval);
+		goto error;
+	}
+
+	udc->op_regs = (struct mv_op_regs __iomem *)((u32)udc->cap_regs
+		+ (readl(&udc->cap_regs->caplength_hciversion)
+			& CAPLENGTH_MASK));
+	udc->max_eps = readl(&udc->cap_regs->dccparams) & DCCPARAMS_DEN_MASK;
+
+	size = udc->max_eps * sizeof(struct mv_dqh) *2;
+	size = (size + DQH_ALIGNMENT - 1) & ~(DQH_ALIGNMENT - 1);
+	udc->ep_dqh = dma_alloc_coherent(&dev->dev, size,
+					&udc->ep_dqh_dma, GFP_KERNEL);
+
+	if (udc->ep_dqh == NULL) {
+		dev_err(&dev->dev, "allocate dQH memory failed\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+	udc->ep_dqh_size = size;
+
+	/* create dTD dma_pool resource */
+	udc->dtd_pool = dma_pool_create("mv_dtd",
+			&dev->dev,
+			sizeof(struct mv_dtd),
+			DTD_ALIGNMENT,
+			DMA_BOUNDARY);
+
+	if (!udc->dtd_pool) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	size = udc->max_eps * sizeof(struct mv_ep) *2;
+	udc->eps = kzalloc(size, GFP_KERNEL);
+	if (udc->eps == NULL) {
+		dev_err(&dev->dev, "allocate ep memory failed\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	/* initialize ep0 status request structure */
+	udc->status_req = kzalloc(sizeof(struct mv_req), GFP_KERNEL);
+	if (!udc->status_req) {
+		dev_err(&dev->dev, "allocate status_req memory failed\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+	INIT_LIST_HEAD(&udc->status_req->queue);
+
+	/* allocate a small amount of memory to get valid address */
+	udc->status_req->req.buf = kzalloc(8, GFP_KERNEL);
+	udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf);
+
+	udc->resume_state = USB_STATE_NOTATTACHED;
+	udc->usb_state = USB_STATE_POWERED;
+	udc->ep0_dir = EP_DIR_OUT;
+	udc->remote_wakeup = 0;
+
+	r = platform_get_resource(udc->dev, IORESOURCE_IRQ, 0);
+	if (r == NULL) {
+		dev_err(&dev->dev, "no IRQ resource defined\n");
+		retval = -ENODEV;
+		goto error;
+	}
+	udc->irq = r->start;
+	if (request_irq(udc->irq, mv_udc_irq,
+		IRQF_DISABLED | IRQF_SHARED, driver_name, udc)) {
+		dev_err(&dev->dev, "Request irq %d for UDC failed\n",
+			udc->irq);
+		retval = -ENODEV;
+		goto error;
+	}
+
+	/* initialize gadget structure */
+	udc->gadget.ops = &mv_ops;	/* usb_gadget_ops */
+	udc->gadget.ep0 = &udc->eps[0].ep;	/* gadget ep0 */
+	INIT_LIST_HEAD(&udc->gadget.ep_list);	/* ep_list */
+	udc->gadget.speed = USB_SPEED_UNKNOWN;	/* speed */
+	udc->gadget.is_dualspeed = 1;		/* support dual speed */
+
+	/* the "gadget" abstracts/virtualizes the controller */
+	dev_set_name(&udc->gadget.dev, "gadget");
+	udc->gadget.dev.parent = &dev->dev;
+	udc->gadget.dev.dma_mask = dev->dev.dma_mask;
+	udc->gadget.dev.release = gadget_release;
+	udc->gadget.name = driver_name;		/* gadget name */
+
+	retval = device_register(&udc->gadget.dev);
+	if (retval)
+		goto error;
+
+	eps_init(udc);
+
+	the_controller = udc;
+
+	goto out;
+error:
+	if (udc)
+		mv_udc_remove(udc->dev);
+out:
+	return retval;
+}
+
+#ifdef CONFIG_PM
+static int mv_udc_suspend(struct platform_device *_dev, pm_message_t state)
+{
+	struct mv_udc *udc = the_controller;
+
+	udc_stop(udc);
+
+	return 0;
+}
+
+static int mv_udc_resume(struct platform_device *_dev)
+{
+	struct mv_udc *udc = the_controller;
+	int retval;
+
+	retval = mv_udc_phy_init(udc->phy_regs);
+	if (retval) {
+		dev_err(_dev, "phy initialization error %d\n", retval);
+		goto error;
+	}
+	udc_reset(udc);
+	ep0_reset(udc);
+	udc_start(udc);
+
+	return 0;
+}
+
+static const struct dev_pm_ops mv_udc_pm_ops = {
+	.suspend	= mv_udc_suspend,
+	.resume		= mv_udc_resume,
+};
+#endif
+
+static struct platform_driver udc_driver = {
+	.probe		= mv_udc_probe,
+	.remove		= __exit_p(mv_udc_remove),
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "pxa-u2o",
+#ifdef CONFIG_PM
+		.pm	= mv_udc_pm_ops,
+#endif
+	},
+};
+
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Chao Xie <chao.xie@marvell.com>");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+
+static int __init init(void)
+{
+	return platform_driver_register(&udc_driver);
+}
+module_init(init);
+
+
+static void __exit cleanup(void)
+{
+	platform_driver_unregister(&udc_driver);
+}
+module_exit(cleanup);
+
diff --git a/drivers/usb/gadget/mv_udc_phy.c b/drivers/usb/gadget/mv_udc_phy.c
new file mode 100644
index 00000000000..d4dea97e38a
--- /dev/null
+++ b/drivers/usb/gadget/mv_udc_phy.c
@@ -0,0 +1,214 @@
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+
+#include <mach/cputype.h>
+
+#ifdef CONFIG_ARCH_MMP
+
+#define UTMI_REVISION		0x0
+#define UTMI_CTRL		0x4
+#define UTMI_PLL		0x8
+#define UTMI_TX			0xc
+#define UTMI_RX			0x10
+#define UTMI_IVREF		0x14
+#define UTMI_T0			0x18
+#define UTMI_T1			0x1c
+#define UTMI_T2			0x20
+#define UTMI_T3			0x24
+#define UTMI_T4			0x28
+#define UTMI_T5			0x2c
+#define UTMI_RESERVE		0x30
+#define UTMI_USB_INT		0x34
+#define UTMI_DBG_CTL		0x38
+#define UTMI_OTG_ADDON		0x3c
+
+/* For UTMICTRL Register */
+#define UTMI_CTRL_USB_CLK_EN			(1 << 31)
+/* pxa168 */
+#define UTMI_CTRL_SUSPEND_SET1			(1 << 30)
+#define UTMI_CTRL_SUSPEND_SET2			(1 << 29)
+#define UTMI_CTRL_RXBUF_PDWN			(1 << 24)
+#define UTMI_CTRL_TXBUF_PDWN			(1 << 11)
+
+#define UTMI_CTRL_INPKT_DELAY_SHIFT		30
+#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT		28
+#define UTMI_CTRL_PU_REF_SHIFT			20
+#define UTMI_CTRL_ARC_PULLDN_SHIFT		12
+#define UTMI_CTRL_PLL_PWR_UP_SHIFT		1
+#define UTMI_CTRL_PWR_UP_SHIFT			0
+/* For UTMI_PLL Register */
+#define UTMI_PLL_CLK_BLK_EN_SHIFT		24
+#define UTMI_PLL_FBDIV_SHIFT			4
+#define UTMI_PLL_REFDIV_SHIFT			0
+#define UTMI_PLL_FBDIV_MASK			0x00000FF0
+#define UTMI_PLL_REFDIV_MASK			0x0000000F
+#define UTMI_PLL_ICP_MASK			0x00007000
+#define UTMI_PLL_KVCO_MASK			0x00031000
+#define UTMI_PLL_PLLCALI12_SHIFT		29
+#define UTMI_PLL_PLLCALI12_MASK			(0x3 << 29)
+#define UTMI_PLL_PLLVDD18_SHIFT			27
+#define UTMI_PLL_PLLVDD18_MASK			(0x3 << 27)
+#define UTMI_PLL_PLLVDD12_SHIFT			25
+#define UTMI_PLL_PLLVDD12_MASK			(0x3 << 25)
+#define UTMI_PLL_KVCO_SHIFT			15
+#define UTMI_PLL_ICP_SHIFT			12
+/* For UTMI_TX Register */
+#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT		27
+#define UTMI_TX_REG_EXT_FS_RCAL_MASK		(0xf << 27)
+#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK		26
+#define UTMI_TX_REG_EXT_FS_RCAL_EN		(0x1 << 26)
+#define UTMI_TX_LOW_VDD_EN_SHIFT		11
+#define UTMI_TX_IMPCAL_VTH_SHIFT		14
+#define UTMI_TX_IMPCAL_VTH_MASK			(0x7 << 14)
+#define UTMI_TX_CK60_PHSEL_SHIFT		17
+#define UTMI_TX_CK60_PHSEL_MASK			(0xf << 17)
+#define UTMI_TX_TXVDD12_SHIFT                   22
+#define UTMI_TX_TXVDD12_MASK			(0x3 << 22)
+#define UTMI_TX_AMP_SHIFT			0
+#define UTMI_TX_AMP_MASK			(0x7 << 0)
+/* For UTMI_RX Register */
+#define UTMI_RX_SQ_THRESH_SHIFT			4
+#define UTMI_RX_SQ_THRESH_MASK			(0xf << 4)
+#define UTMI_REG_SQ_LENGTH_SHIFT		15
+#define UTMI_REG_SQ_LENGTH_MASK			(0x3 << 15)
+
+#define REG_RCAL_START				0x00001000
+#define VCOCAL_START				0x00200000
+#define KVCO_EXT				0x00400000
+#define PLL_READY				0x00800000
+#define CLK_BLK_EN				0x01000000
+#endif
+
+static unsigned int u2o_read(unsigned int base, unsigned int offset)
+{
+	return readl(base + offset);
+}
+
+static void u2o_set(unsigned int base, unsigned int offset, unsigned int value)
+{
+	unsigned int reg;
+
+	reg = readl(base + offset);
+	reg |= value;
+	writel(reg, base + offset);
+	readl(base + offset);
+}
+
+static void u2o_clear(unsigned int base, unsigned int offset,
+	unsigned int value)
+{
+	unsigned int reg;
+
+	reg = readl(base + offset);
+	reg &= ~value;
+	writel(reg, base + offset);
+	readl(base + offset);
+}
+
+static void u2o_write(unsigned int base, unsigned int offset,
+	unsigned int value)
+{
+	writel(value, base + offset);
+	readl(base + offset);
+}
+
+#ifdef CONFIG_ARCH_MMP
+int mv_udc_phy_init(unsigned int base)
+{
+	unsigned long timeout;
+
+	/* Initialize the USB PHY power */
+	if (cpu_is_pxa910()) {
+		u2o_set(base, UTMI_CTRL, (1 << UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
+			| (1 << UTMI_CTRL_PU_REF_SHIFT));
+	}
+
+	u2o_set(base, UTMI_CTRL, 1 << UTMI_CTRL_PLL_PWR_UP_SHIFT);
+	u2o_set(base, UTMI_CTRL, 1 << UTMI_CTRL_PWR_UP_SHIFT);
+
+	/* UTMI_PLL settings */
+	u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
+		| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
+		| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
+		| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
+
+	u2o_set(base, UTMI_PLL, (0xee << UTMI_PLL_FBDIV_SHIFT)
+		| (0xb << UTMI_PLL_REFDIV_SHIFT)
+		| (3 << UTMI_PLL_PLLVDD18_SHIFT)
+		| (3 << UTMI_PLL_PLLVDD12_SHIFT)
+		| (3 << UTMI_PLL_PLLCALI12_SHIFT)
+		| (1 << UTMI_PLL_ICP_SHIFT) | (3 << UTMI_PLL_KVCO_SHIFT));
+
+	/* UTMI_TX */
+	u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
+		| UTMI_TX_TXVDD12_MASK
+		| UTMI_TX_CK60_PHSEL_MASK | UTMI_TX_IMPCAL_VTH_MASK
+		| UTMI_TX_REG_EXT_FS_RCAL_MASK | UTMI_TX_AMP_MASK);
+	u2o_set(base, UTMI_TX, (3 << UTMI_TX_TXVDD12_SHIFT)
+		| (4 << UTMI_TX_CK60_PHSEL_SHIFT)
+		| (4 << UTMI_TX_IMPCAL_VTH_SHIFT)
+		| (8 << UTMI_TX_REG_EXT_FS_RCAL_SHIFT)
+		| (3 << UTMI_TX_AMP_SHIFT));
+
+	/* UTMI_RX */
+	u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
+		| UTMI_REG_SQ_LENGTH_MASK);
+	if (cpu_is_pxa168())
+		u2o_set(base, UTMI_RX, (7 << UTMI_RX_SQ_THRESH_SHIFT)
+			| (2 << UTMI_REG_SQ_LENGTH_SHIFT));
+	else
+		u2o_set(base, UTMI_RX, (0x7 << UTMI_RX_SQ_THRESH_SHIFT)
+			| (2 << UTMI_REG_SQ_LENGTH_SHIFT));
+
+	/* UTMI_IVREF */
+	if (cpu_is_pxa168())
+		/*
+		 * fixing Microsoft Altair board interface with NEC hub issue -
+		 * Set UTMI_IVREF from 0x4a3 to 0x4bf
+		 */
+		u2o_write(base, UTMI_IVREF, 0x4bf);
+
+	/* calibrate */
+	timeout = jiffies + 100;
+	while ((u2o_read(base, UTMI_PLL) & PLL_READY) == 0) {
+		if (time_after(jiffies, timeout))
+			return -ETIME;
+		cpu_relax();
+	}
+
+	/* toggle VCOCAL_START bit of UTMI_PLL */
+	udelay(200);
+	u2o_set(base, UTMI_PLL, VCOCAL_START);
+	udelay(40);
+	u2o_clear(base, UTMI_PLL, VCOCAL_START);
+
+	/* toggle REG_RCAL_START bit of UTMI_TX */
+	udelay(200);
+	u2o_set(base, UTMI_TX, REG_RCAL_START);
+	udelay(40);
+	u2o_clear(base, UTMI_TX, REG_RCAL_START);
+	udelay(200);
+
+	/* make sure phy is ready */
+	timeout = jiffies + 100;
+	while ((u2o_read(base, UTMI_PLL) & PLL_READY) == 0) {
+		if (time_after(jiffies, timeout))
+			return -ETIME;
+		cpu_relax();
+	}
+
+	if (cpu_is_pxa168()) {
+		u2o_set(base, UTMI_RESERVE, 1 << 5);
+		/* Turn on UTMI PHY OTG extension */
+		u2o_write(base, UTMI_OTG_ADDON, 1);
+	}
+	return 0;
+}
+#else
+int mv_udc_phy_init(unsigned int base)
+{
+	return 0;
+}
+#endif
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
new file mode 100644
index 00000000000..99c179ad729
--- /dev/null
+++ b/drivers/usb/gadget/ncm.c
@@ -0,0 +1,248 @@
+/*
+ * ncm.c -- NCM gadget driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Contact: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
+ *
+ * The driver borrows from ether.c which is:
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/* #define DEBUG */
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+
+
+#include "u_ether.h"
+
+#define DRIVER_DESC		"NCM Gadget"
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Kbuild is not very cooperative with respect to linking separately
+ * compiled library objects into one module.  So for now we won't use
+ * separate compilation ... ensuring init/exit sections work to shrink
+ * the runtime footprint, and giving us at least some parts of what
+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
+ */
+#include "composite.c"
+#include "usbstring.c"
+#include "config.c"
+#include "epautoconf.c"
+
+#include "f_ncm.c"
+#include "u_ether.c"
+
+/*-------------------------------------------------------------------------*/
+
+/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
+
+/* Thanks to NetChip Technologies for donating this product ID.
+ * It's for devices with only CDC Ethernet configurations.
+ */
+#define CDC_VENDOR_NUM		0x0525	/* NetChip */
+#define CDC_PRODUCT_NUM		0xa4a1	/* Linux-USB Ethernet Gadget */
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	.bcdUSB =		cpu_to_le16 (0x0200),
+
+	.bDeviceClass =		USB_CLASS_COMM,
+	.bDeviceSubClass =	0,
+	.bDeviceProtocol =	0,
+	/* .bMaxPacketSize0 = f(hardware) */
+
+	/* Vendor and product id defaults change according to what configs
+	 * we support.  (As does bNumConfigurations.)  These values can
+	 * also be overridden by module parameters.
+	 */
+	.idVendor =		cpu_to_le16 (CDC_VENDOR_NUM),
+	.idProduct =		cpu_to_le16 (CDC_PRODUCT_NUM),
+	/* .bcdDevice = f(hardware) */
+	/* .iManufacturer = DYNAMIC */
+	/* .iProduct = DYNAMIC */
+	/* NO SERIAL NUMBER */
+	.bNumConfigurations =	1,
+};
+
+static struct usb_otg_descriptor otg_descriptor = {
+	.bLength =		sizeof otg_descriptor,
+	.bDescriptorType =	USB_DT_OTG,
+
+	/* REVISIT SRP-only hardware is possible, although
+	 * it would not be called "OTG" ...
+	 */
+	.bmAttributes =		USB_OTG_SRP | USB_OTG_HNP,
+};
+
+static const struct usb_descriptor_header *otg_desc[] = {
+	(struct usb_descriptor_header *) &otg_descriptor,
+	NULL,
+};
+
+
+/* string IDs are assigned dynamically */
+
+#define STRING_MANUFACTURER_IDX		0
+#define STRING_PRODUCT_IDX		1
+
+static char manufacturer[50];
+
+static struct usb_string strings_dev[] = {
+	[STRING_MANUFACTURER_IDX].s = manufacturer,
+	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+static u8 hostaddr[ETH_ALEN];
+
+/*-------------------------------------------------------------------------*/
+
+static int __init ncm_do_config(struct usb_configuration *c)
+{
+	/* FIXME alloc iConfiguration string, set it in c->strings */
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	return ncm_bind_config(c, hostaddr);
+}
+
+static struct usb_configuration ncm_config_driver = {
+	/* .label = f(hardware) */
+	.label			= "CDC Ethernet (NCM)",
+	.bConfigurationValue	= 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init gncm_bind(struct usb_composite_dev *cdev)
+{
+	int			gcnum;
+	struct usb_gadget	*gadget = cdev->gadget;
+	int			status;
+
+	/* set up network link layer */
+	status = gether_setup(cdev->gadget, hostaddr);
+	if (status < 0)
+		return status;
+
+	gcnum = usb_gadget_controller_number(gadget);
+	if (gcnum >= 0)
+		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
+	else {
+		/* We assume that can_support_ecm() tells the truth;
+		 * but if the controller isn't recognized at all then
+		 * that assumption is a bit more likely to be wrong.
+		 */
+		dev_warn(&gadget->dev,
+			 "controller '%s' not recognized; trying %s\n",
+			 gadget->name,
+			 ncm_config_driver.label);
+		device_desc.bcdDevice =
+			cpu_to_le16(0x0300 | 0x0099);
+	}
+
+
+	/* Allocate string descriptor numbers ... note that string
+	 * contents can be overridden by the composite_dev glue.
+	 */
+
+	/* device descriptor strings: manufacturer, product */
+	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
+		init_utsname()->sysname, init_utsname()->release,
+		gadget->name);
+	status = usb_string_id(cdev);
+	if (status < 0)
+		goto fail;
+	strings_dev[STRING_MANUFACTURER_IDX].id = status;
+	device_desc.iManufacturer = status;
+
+	status = usb_string_id(cdev);
+	if (status < 0)
+		goto fail;
+	strings_dev[STRING_PRODUCT_IDX].id = status;
+	device_desc.iProduct = status;
+
+	status = usb_add_config(cdev, &ncm_config_driver,
+				ncm_do_config);
+	if (status < 0)
+		goto fail;
+
+	dev_info(&gadget->dev, "%s\n", DRIVER_DESC);
+
+	return 0;
+
+fail:
+	gether_cleanup();
+	return status;
+}
+
+static int __exit gncm_unbind(struct usb_composite_dev *cdev)
+{
+	gether_cleanup();
+	return 0;
+}
+
+static struct usb_composite_driver ncm_driver = {
+	.name		= "g_ncm",
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.unbind		= __exit_p(gncm_unbind),
+};
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Yauheni Kaliuta");
+MODULE_LICENSE("GPL");
+
+static int __init init(void)
+{
+	return usb_composite_probe(&ncm_driver, gncm_bind);
+}
+module_init(init);
+
+static void __exit cleanup(void)
+{
+	usb_composite_unregister(&ncm_driver);
+}
+module_exit(cleanup);
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
new file mode 100644
index 00000000000..0c8dd81dddc
--- /dev/null
+++ b/drivers/usb/gadget/pch_udc.c
@@ -0,0 +1,2947 @@
+/*
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* Address offset of Registers */
+#define UDC_EP_REG_SHIFT	0x20	/* Offset to next EP */
+
+#define UDC_EPCTL_ADDR		0x00	/* Endpoint control */
+#define UDC_EPSTS_ADDR		0x04	/* Endpoint status */
+#define UDC_BUFIN_FRAMENUM_ADDR	0x08	/* buffer size in / frame number out */
+#define UDC_BUFOUT_MAXPKT_ADDR	0x0C	/* buffer size out / maxpkt in */
+#define UDC_SUBPTR_ADDR		0x10	/* setup buffer pointer */
+#define UDC_DESPTR_ADDR		0x14	/* Data descriptor pointer */
+#define UDC_CONFIRM_ADDR	0x18	/* Write/Read confirmation */
+
+#define UDC_DEVCFG_ADDR		0x400	/* Device configuration */
+#define UDC_DEVCTL_ADDR		0x404	/* Device control */
+#define UDC_DEVSTS_ADDR		0x408	/* Device status */
+#define UDC_DEVIRQSTS_ADDR	0x40C	/* Device irq status */
+#define UDC_DEVIRQMSK_ADDR	0x410	/* Device irq mask */
+#define UDC_EPIRQSTS_ADDR	0x414	/* Endpoint irq status */
+#define UDC_EPIRQMSK_ADDR	0x418	/* Endpoint irq mask */
+#define UDC_DEVLPM_ADDR		0x41C	/* LPM control / status */
+#define UDC_CSR_BUSY_ADDR	0x4f0	/* UDC_CSR_BUSY Status register */
+#define UDC_SRST_ADDR		0x4fc	/* SOFT RESET register */
+#define UDC_CSR_ADDR		0x500	/* USB_DEVICE endpoint register */
+
+/* Endpoint control register */
+/* Bit position */
+#define UDC_EPCTL_MRXFLUSH		(1 << 12)
+#define UDC_EPCTL_RRDY			(1 << 9)
+#define UDC_EPCTL_CNAK			(1 << 8)
+#define UDC_EPCTL_SNAK			(1 << 7)
+#define UDC_EPCTL_NAK			(1 << 6)
+#define UDC_EPCTL_P			(1 << 3)
+#define UDC_EPCTL_F			(1 << 1)
+#define UDC_EPCTL_S			(1 << 0)
+#define UDC_EPCTL_ET_SHIFT		4
+/* Mask patern */
+#define UDC_EPCTL_ET_MASK		0x00000030
+/* Value for ET field */
+#define UDC_EPCTL_ET_CONTROL		0
+#define UDC_EPCTL_ET_ISO		1
+#define UDC_EPCTL_ET_BULK		2
+#define UDC_EPCTL_ET_INTERRUPT		3
+
+/* Endpoint status register */
+/* Bit position */
+#define UDC_EPSTS_XFERDONE		(1 << 27)
+#define UDC_EPSTS_RSS			(1 << 26)
+#define UDC_EPSTS_RCS			(1 << 25)
+#define UDC_EPSTS_TXEMPTY		(1 << 24)
+#define UDC_EPSTS_TDC			(1 << 10)
+#define UDC_EPSTS_HE			(1 << 9)
+#define UDC_EPSTS_MRXFIFO_EMP		(1 << 8)
+#define UDC_EPSTS_BNA			(1 << 7)
+#define UDC_EPSTS_IN			(1 << 6)
+#define UDC_EPSTS_OUT_SHIFT		4
+/* Mask patern */
+#define UDC_EPSTS_OUT_MASK		0x00000030
+#define UDC_EPSTS_ALL_CLR_MASK		0x1F0006F0
+/* Value for OUT field */
+#define UDC_EPSTS_OUT_SETUP		2
+#define UDC_EPSTS_OUT_DATA		1
+
+/* Device configuration register */
+/* Bit position */
+#define UDC_DEVCFG_CSR_PRG		(1 << 17)
+#define UDC_DEVCFG_SP			(1 << 3)
+/* SPD Valee */
+#define UDC_DEVCFG_SPD_HS		0x0
+#define UDC_DEVCFG_SPD_FS		0x1
+#define UDC_DEVCFG_SPD_LS		0x2
+
+/* Device control register */
+/* Bit position */
+#define UDC_DEVCTL_THLEN_SHIFT		24
+#define UDC_DEVCTL_BRLEN_SHIFT		16
+#define UDC_DEVCTL_CSR_DONE		(1 << 13)
+#define UDC_DEVCTL_SD			(1 << 10)
+#define UDC_DEVCTL_MODE			(1 << 9)
+#define UDC_DEVCTL_BREN			(1 << 8)
+#define UDC_DEVCTL_THE			(1 << 7)
+#define UDC_DEVCTL_DU			(1 << 4)
+#define UDC_DEVCTL_TDE			(1 << 3)
+#define UDC_DEVCTL_RDE			(1 << 2)
+#define UDC_DEVCTL_RES			(1 << 0)
+
+/* Device status register */
+/* Bit position */
+#define UDC_DEVSTS_TS_SHIFT		18
+#define UDC_DEVSTS_ENUM_SPEED_SHIFT	13
+#define UDC_DEVSTS_ALT_SHIFT		8
+#define UDC_DEVSTS_INTF_SHIFT		4
+#define UDC_DEVSTS_CFG_SHIFT		0
+/* Mask patern */
+#define UDC_DEVSTS_TS_MASK		0xfffc0000
+#define UDC_DEVSTS_ENUM_SPEED_MASK	0x00006000
+#define UDC_DEVSTS_ALT_MASK		0x00000f00
+#define UDC_DEVSTS_INTF_MASK		0x000000f0
+#define UDC_DEVSTS_CFG_MASK		0x0000000f
+/* value for maximum speed for SPEED field */
+#define UDC_DEVSTS_ENUM_SPEED_FULL	1
+#define UDC_DEVSTS_ENUM_SPEED_HIGH	0
+#define UDC_DEVSTS_ENUM_SPEED_LOW	2
+#define UDC_DEVSTS_ENUM_SPEED_FULLX	3
+
+/* Device irq register */
+/* Bit position */
+#define UDC_DEVINT_RWKP			(1 << 7)
+#define UDC_DEVINT_ENUM			(1 << 6)
+#define UDC_DEVINT_SOF			(1 << 5)
+#define UDC_DEVINT_US			(1 << 4)
+#define UDC_DEVINT_UR			(1 << 3)
+#define UDC_DEVINT_ES			(1 << 2)
+#define UDC_DEVINT_SI			(1 << 1)
+#define UDC_DEVINT_SC			(1 << 0)
+/* Mask patern */
+#define UDC_DEVINT_MSK			0x7f
+
+/* Endpoint irq register */
+/* Bit position */
+#define UDC_EPINT_IN_SHIFT		0
+#define UDC_EPINT_OUT_SHIFT		16
+#define UDC_EPINT_IN_EP0		(1 << 0)
+#define UDC_EPINT_OUT_EP0		(1 << 16)
+/* Mask patern */
+#define UDC_EPINT_MSK_DISABLE_ALL	0xffffffff
+
+/* UDC_CSR_BUSY Status register */
+/* Bit position */
+#define UDC_CSR_BUSY			(1 << 0)
+
+/* SOFT RESET register */
+/* Bit position */
+#define UDC_PSRST			(1 << 1)
+#define UDC_SRST			(1 << 0)
+
+/* USB_DEVICE endpoint register */
+/* Bit position */
+#define UDC_CSR_NE_NUM_SHIFT		0
+#define UDC_CSR_NE_DIR_SHIFT		4
+#define UDC_CSR_NE_TYPE_SHIFT		5
+#define UDC_CSR_NE_CFG_SHIFT		7
+#define UDC_CSR_NE_INTF_SHIFT		11
+#define UDC_CSR_NE_ALT_SHIFT		15
+#define UDC_CSR_NE_MAX_PKT_SHIFT	19
+/* Mask patern */
+#define UDC_CSR_NE_NUM_MASK		0x0000000f
+#define UDC_CSR_NE_DIR_MASK		0x00000010
+#define UDC_CSR_NE_TYPE_MASK		0x00000060
+#define UDC_CSR_NE_CFG_MASK		0x00000780
+#define UDC_CSR_NE_INTF_MASK		0x00007800
+#define UDC_CSR_NE_ALT_MASK		0x00078000
+#define UDC_CSR_NE_MAX_PKT_MASK		0x3ff80000
+
+#define PCH_UDC_CSR(ep)	(UDC_CSR_ADDR + ep*4)
+#define PCH_UDC_EPINT(in, num)\
+		(1 << (num + (in ? UDC_EPINT_IN_SHIFT : UDC_EPINT_OUT_SHIFT)))
+
+/* Index of endpoint */
+#define UDC_EP0IN_IDX		0
+#define UDC_EP0OUT_IDX		1
+#define UDC_EPIN_IDX(ep)	(ep * 2)
+#define UDC_EPOUT_IDX(ep)	(ep * 2 + 1)
+#define PCH_UDC_EP0		0
+#define PCH_UDC_EP1		1
+#define PCH_UDC_EP2		2
+#define PCH_UDC_EP3		3
+
+/* Number of endpoint */
+#define PCH_UDC_EP_NUM		32	/* Total number of EPs (16 IN,16 OUT) */
+#define PCH_UDC_USED_EP_NUM	4	/* EP number of EP's really used */
+/* Length Value */
+#define PCH_UDC_BRLEN		0x0F	/* Burst length */
+#define PCH_UDC_THLEN		0x1F	/* Threshold length */
+/* Value of EP Buffer Size */
+#define UDC_EP0IN_BUFF_SIZE	64
+#define UDC_EPIN_BUFF_SIZE	512
+#define UDC_EP0OUT_BUFF_SIZE	64
+#define UDC_EPOUT_BUFF_SIZE	512
+/* Value of EP maximum packet size */
+#define UDC_EP0IN_MAX_PKT_SIZE	64
+#define UDC_EP0OUT_MAX_PKT_SIZE	64
+#define UDC_BULK_MAX_PKT_SIZE	512
+
+/* DMA */
+#define DMA_DIR_RX		1	/* DMA for data receive */
+#define DMA_DIR_TX		2	/* DMA for data transmit */
+#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
+#define UDC_DMA_MAXPACKET	65536	/* maximum packet size for DMA */
+
+/**
+ * struct pch_udc_data_dma_desc - Structure to hold DMA descriptor information
+ *				  for data
+ * @status:		Status quadlet
+ * @reserved:		Reserved
+ * @dataptr:		Buffer descriptor
+ * @next:		Next descriptor
+ */
+struct pch_udc_data_dma_desc {
+	u32 status;
+	u32 reserved;
+	u32 dataptr;
+	u32 next;
+};
+
+/**
+ * struct pch_udc_stp_dma_desc - Structure to hold DMA descriptor information
+ *				 for control data
+ * @status:	Status
+ * @reserved:	Reserved
+ * @data12:	First setup word
+ * @data34:	Second setup word
+ */
+struct pch_udc_stp_dma_desc {
+	u32 status;
+	u32 reserved;
+	struct usb_ctrlrequest request;
+} __attribute((packed));
+
+/* DMA status definitions */
+/* Buffer status */
+#define PCH_UDC_BUFF_STS	0xC0000000
+#define PCH_UDC_BS_HST_RDY	0x00000000
+#define PCH_UDC_BS_DMA_BSY	0x40000000
+#define PCH_UDC_BS_DMA_DONE	0x80000000
+#define PCH_UDC_BS_HST_BSY	0xC0000000
+/*  Rx/Tx Status */
+#define PCH_UDC_RXTX_STS	0x30000000
+#define PCH_UDC_RTS_SUCC	0x00000000
+#define PCH_UDC_RTS_DESERR	0x10000000
+#define PCH_UDC_RTS_BUFERR	0x30000000
+/* Last Descriptor Indication */
+#define PCH_UDC_DMA_LAST	0x08000000
+/* Number of Rx/Tx Bytes Mask */
+#define PCH_UDC_RXTX_BYTES	0x0000ffff
+
+/**
+ * struct pch_udc_cfg_data - Structure to hold current configuration
+ *			     and interface information
+ * @cur_cfg:	current configuration in use
+ * @cur_intf:	current interface in use
+ * @cur_alt:	current alt interface in use
+ */
+struct pch_udc_cfg_data {
+	u16 cur_cfg;
+	u16 cur_intf;
+	u16 cur_alt;
+};
+
+/**
+ * struct pch_udc_ep - Structure holding a PCH USB device Endpoint information
+ * @ep:			embedded ep request
+ * @td_stp_phys:	for setup request
+ * @td_data_phys:	for data request
+ * @td_stp:		for setup request
+ * @td_data:		for data request
+ * @dev:		reference to device struct
+ * @offset_addr:	offset address of ep register
+ * @desc:		for this ep
+ * @queue:		queue for requests
+ * @num:		endpoint number
+ * @in:			endpoint is IN
+ * @halted:		endpoint halted?
+ * @epsts:		Endpoint status
+ */
+struct pch_udc_ep {
+	struct usb_ep			ep;
+	dma_addr_t			td_stp_phys;
+	dma_addr_t			td_data_phys;
+	struct pch_udc_stp_dma_desc	*td_stp;
+	struct pch_udc_data_dma_desc	*td_data;
+	struct pch_udc_dev		*dev;
+	unsigned long			offset_addr;
+	const struct usb_endpoint_descriptor	*desc;
+	struct list_head		queue;
+	unsigned			num:5,
+					in:1,
+					halted:1;
+	unsigned long			epsts;
+};
+
+/**
+ * struct pch_udc_dev - Structure holding complete information
+ *			of the PCH USB device
+ * @gadget:		gadget driver data
+ * @driver:		reference to gadget driver bound
+ * @pdev:		reference to the PCI device
+ * @ep:			array of endpoints
+ * @lock:		protects all state
+ * @active:		enabled the PCI device
+ * @stall:		stall requested
+ * @prot_stall:		protcol stall requested
+ * @irq_registered:	irq registered with system
+ * @mem_region:		device memory mapped
+ * @registered:		driver regsitered with system
+ * @suspended:		driver in suspended state
+ * @connected:		gadget driver associated
+ * @set_cfg_not_acked:	pending acknowledgement 4 setup
+ * @waiting_zlp_ack:	pending acknowledgement 4 ZLP
+ * @data_requests:	DMA pool for data requests
+ * @stp_requests:	DMA pool for setup requests
+ * @dma_addr:		DMA pool for received
+ * @ep0out_buf:		Buffer for DMA
+ * @setup_data:		Received setup data
+ * @phys_addr:		of device memory
+ * @base_addr:		for mapped device memory
+ * @irq:		IRQ line for the device
+ * @cfg_data:		current cfg, intf, and alt in use
+ */
+struct pch_udc_dev {
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	struct pci_dev			*pdev;
+	struct pch_udc_ep		ep[PCH_UDC_EP_NUM];
+	spinlock_t			lock; /* protects all state */
+	unsigned	active:1,
+			stall:1,
+			prot_stall:1,
+			irq_registered:1,
+			mem_region:1,
+			registered:1,
+			suspended:1,
+			connected:1,
+			set_cfg_not_acked:1,
+			waiting_zlp_ack:1;
+	struct pci_pool		*data_requests;
+	struct pci_pool		*stp_requests;
+	dma_addr_t			dma_addr;
+	unsigned long			ep0out_buf[64];
+	struct usb_ctrlrequest		setup_data;
+	unsigned long			phys_addr;
+	void __iomem			*base_addr;
+	unsigned			irq;
+	struct pch_udc_cfg_data	cfg_data;
+};
+
+#define PCH_UDC_PCI_BAR			1
+#define PCI_DEVICE_ID_INTEL_EG20T_UDC	0x8808
+
+static const char	ep0_string[] = "ep0in";
+static DEFINE_SPINLOCK(udc_stall_spinlock);	/* stall spin lock */
+struct pch_udc_dev *pch_udc;		/* pointer to device object */
+
+static int speed_fs;
+module_param_named(speed_fs, speed_fs, bool, S_IRUGO);
+MODULE_PARM_DESC(speed_fs, "true for Full speed operation");
+
+/**
+ * struct pch_udc_request - Structure holding a PCH USB device request packet
+ * @req:		embedded ep request
+ * @td_data_phys:	phys. address
+ * @td_data:		first dma desc. of chain
+ * @td_data_last:	last dma desc. of chain
+ * @queue:		associated queue
+ * @dma_going:		DMA in progress for request
+ * @dma_mapped:		DMA memory mapped for request
+ * @dma_done:		DMA completed for request
+ * @chain_len:		chain length
+ */
+struct pch_udc_request {
+	struct usb_request		req;
+	dma_addr_t			td_data_phys;
+	struct pch_udc_data_dma_desc	*td_data;
+	struct pch_udc_data_dma_desc	*td_data_last;
+	struct list_head		queue;
+	unsigned			dma_going:1,
+					dma_mapped:1,
+					dma_done:1;
+	unsigned			chain_len;
+};
+
+static inline u32 pch_udc_readl(struct pch_udc_dev *dev, unsigned long reg)
+{
+	return ioread32(dev->base_addr + reg);
+}
+
+static inline void pch_udc_writel(struct pch_udc_dev *dev,
+				    unsigned long val, unsigned long reg)
+{
+	iowrite32(val, dev->base_addr + reg);
+}
+
+static inline void pch_udc_bit_set(struct pch_udc_dev *dev,
+				     unsigned long reg,
+				     unsigned long bitmask)
+{
+	pch_udc_writel(dev, pch_udc_readl(dev, reg) | bitmask, reg);
+}
+
+static inline void pch_udc_bit_clr(struct pch_udc_dev *dev,
+				     unsigned long reg,
+				     unsigned long bitmask)
+{
+	pch_udc_writel(dev, pch_udc_readl(dev, reg) & ~(bitmask), reg);
+}
+
+static inline u32 pch_udc_ep_readl(struct pch_udc_ep *ep, unsigned long reg)
+{
+	return ioread32(ep->dev->base_addr + ep->offset_addr + reg);
+}
+
+static inline void pch_udc_ep_writel(struct pch_udc_ep *ep,
+				    unsigned long val, unsigned long reg)
+{
+	iowrite32(val, ep->dev->base_addr + ep->offset_addr + reg);
+}
+
+static inline void pch_udc_ep_bit_set(struct pch_udc_ep *ep,
+				     unsigned long reg,
+				     unsigned long bitmask)
+{
+	pch_udc_ep_writel(ep, pch_udc_ep_readl(ep, reg) | bitmask, reg);
+}
+
+static inline void pch_udc_ep_bit_clr(struct pch_udc_ep *ep,
+				     unsigned long reg,
+				     unsigned long bitmask)
+{
+	pch_udc_ep_writel(ep, pch_udc_ep_readl(ep, reg) & ~(bitmask), reg);
+}
+
+/**
+ * pch_udc_csr_busy() - Wait till idle.
+ * @dev:	Reference to pch_udc_dev structure
+ */
+static void pch_udc_csr_busy(struct pch_udc_dev *dev)
+{
+	unsigned int count = 200;
+
+	/* Wait till idle */
+	while ((pch_udc_readl(dev, UDC_CSR_BUSY_ADDR) & UDC_CSR_BUSY)
+		&& --count)
+		cpu_relax();
+	if (!count)
+		dev_err(&dev->pdev->dev, "%s: wait error\n", __func__);
+}
+
+/**
+ * pch_udc_write_csr() - Write the command and status registers.
+ * @dev:	Reference to pch_udc_dev structure
+ * @val:	value to be written to CSR register
+ * @addr:	address of CSR register
+ */
+static void pch_udc_write_csr(struct pch_udc_dev *dev, unsigned long val,
+			       unsigned int ep)
+{
+	unsigned long reg = PCH_UDC_CSR(ep);
+
+	pch_udc_csr_busy(dev);		/* Wait till idle */
+	pch_udc_writel(dev, val, reg);
+	pch_udc_csr_busy(dev);		/* Wait till idle */
+}
+
+/**
+ * pch_udc_read_csr() - Read the command and status registers.
+ * @dev:	Reference to pch_udc_dev structure
+ * @addr:	address of CSR register
+ *
+ * Return codes:	content of CSR register
+ */
+static u32 pch_udc_read_csr(struct pch_udc_dev *dev, unsigned int ep)
+{
+	unsigned long reg = PCH_UDC_CSR(ep);
+
+	pch_udc_csr_busy(dev);		/* Wait till idle */
+	pch_udc_readl(dev, reg);	/* Dummy read */
+	pch_udc_csr_busy(dev);		/* Wait till idle */
+	return pch_udc_readl(dev, reg);
+}
+
+/**
+ * pch_udc_rmt_wakeup() - Initiate for remote wakeup
+ * @dev:	Reference to pch_udc_dev structure
+ */
+static inline void pch_udc_rmt_wakeup(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+	mdelay(1);
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+}
+
+/**
+ * pch_udc_get_frame() - Get the current frame from device status register
+ * @dev:	Reference to pch_udc_dev structure
+ * Retern	current frame
+ */
+static inline int pch_udc_get_frame(struct pch_udc_dev *dev)
+{
+	u32 frame = pch_udc_readl(dev, UDC_DEVSTS_ADDR);
+	return (frame & UDC_DEVSTS_TS_MASK) >> UDC_DEVSTS_TS_SHIFT;
+}
+
+/**
+ * pch_udc_clear_selfpowered() - Clear the self power control
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static inline void pch_udc_clear_selfpowered(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_clr(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_SP);
+}
+
+/**
+ * pch_udc_set_selfpowered() - Set the self power control
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static inline void pch_udc_set_selfpowered(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_SP);
+}
+
+/**
+ * pch_udc_set_disconnect() - Set the disconnect status.
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static inline void pch_udc_set_disconnect(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
+}
+
+/**
+ * pch_udc_clear_disconnect() - Clear the disconnect status.
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static void pch_udc_clear_disconnect(struct pch_udc_dev *dev)
+{
+	/* Clear the disconnect */
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
+	mdelay(1);
+	/* Resume USB signalling */
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+}
+
+/**
+ * pch_udc_vbus_session() - set or clearr the disconnect status.
+ * @dev:	Reference to pch_udc_regs structure
+ * @is_active:	Parameter specifying the action
+ *		  0:   indicating VBUS power is ending
+ *		  !0:  indicating VBUS power is starting
+ */
+static inline void pch_udc_vbus_session(struct pch_udc_dev *dev,
+					  int is_active)
+{
+	if (is_active)
+		pch_udc_clear_disconnect(dev);
+	else
+		pch_udc_set_disconnect(dev);
+}
+
+/**
+ * pch_udc_ep_set_stall() - Set the stall of endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static void pch_udc_ep_set_stall(struct pch_udc_ep *ep)
+{
+	if (ep->in) {
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_F);
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
+	} else {
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
+	}
+}
+
+/**
+ * pch_udc_ep_clear_stall() - Clear the stall of endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_clear_stall(struct pch_udc_ep *ep)
+{
+	/* Clear the stall */
+	pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
+	/* Clear NAK by writing CNAK */
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_CNAK);
+}
+
+/**
+ * pch_udc_ep_set_trfr_type() - Set the transfer type of endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @type:	Type of endpoint
+ */
+static inline void pch_udc_ep_set_trfr_type(struct pch_udc_ep *ep,
+					u8 type)
+{
+	pch_udc_ep_writel(ep, ((type << UDC_EPCTL_ET_SHIFT) &
+				UDC_EPCTL_ET_MASK), UDC_EPCTL_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_bufsz() - Set the maximum packet size for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @buf_size:	The buffer size
+ */
+static void pch_udc_ep_set_bufsz(struct pch_udc_ep *ep,
+						 u32 buf_size, u32 ep_in)
+{
+	u32 data;
+	if (ep_in) {
+		data = pch_udc_ep_readl(ep, UDC_BUFIN_FRAMENUM_ADDR);
+		data = (data & 0xffff0000) | (buf_size & 0xffff);
+		pch_udc_ep_writel(ep, data, UDC_BUFIN_FRAMENUM_ADDR);
+	} else {
+		data = pch_udc_ep_readl(ep, UDC_BUFOUT_MAXPKT_ADDR);
+		data = (buf_size << 16) | (data & 0xffff);
+		pch_udc_ep_writel(ep, data, UDC_BUFOUT_MAXPKT_ADDR);
+	}
+}
+
+/**
+ * pch_udc_ep_set_maxpkt() - Set the Max packet size for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @pkt_size:	The packet size
+ */
+static void pch_udc_ep_set_maxpkt(struct pch_udc_ep *ep, u32 pkt_size)
+{
+	u32 data = pch_udc_ep_readl(ep, UDC_BUFOUT_MAXPKT_ADDR);
+	data = (data & 0xffff0000) | (pkt_size & 0xffff);
+	pch_udc_ep_writel(ep, data, UDC_BUFOUT_MAXPKT_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_subptr() - Set the Setup buffer pointer for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @addr:	Address of the register
+ */
+static inline void pch_udc_ep_set_subptr(struct pch_udc_ep *ep, u32 addr)
+{
+	pch_udc_ep_writel(ep, addr, UDC_SUBPTR_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_ddptr() - Set the Data descriptor pointer for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @addr:	Address of the register
+ */
+static inline void pch_udc_ep_set_ddptr(struct pch_udc_ep *ep, u32 addr)
+{
+	pch_udc_ep_writel(ep, addr, UDC_DESPTR_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_pd() - Set the poll demand bit for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_set_pd(struct pch_udc_ep *ep)
+{
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_P);
+}
+
+/**
+ * pch_udc_ep_set_rrdy() - Set the receive ready bit for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_set_rrdy(struct pch_udc_ep *ep)
+{
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_RRDY);
+}
+
+/**
+ * pch_udc_ep_clear_rrdy() - Clear the receive ready bit for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_clear_rrdy(struct pch_udc_ep *ep)
+{
+	pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_RRDY);
+}
+
+/**
+ * pch_udc_set_dma() - Set the 'TDE' or RDE bit of device control
+ *			register depending on the direction specified
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @dir:	whether Tx or Rx
+ *		  DMA_DIR_RX: Receive
+ *		  DMA_DIR_TX: Transmit
+ */
+static inline void pch_udc_set_dma(struct pch_udc_dev *dev, int dir)
+{
+	if (dir == DMA_DIR_RX)
+		pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RDE);
+	else if (dir == DMA_DIR_TX)
+		pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_TDE);
+}
+
+/**
+ * pch_udc_clear_dma() - Clear the 'TDE' or RDE bit of device control
+ *				 register depending on the direction specified
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @dir:	Whether Tx or Rx
+ *		  DMA_DIR_RX: Receive
+ *		  DMA_DIR_TX: Transmit
+ */
+static inline void pch_udc_clear_dma(struct pch_udc_dev *dev, int dir)
+{
+	if (dir == DMA_DIR_RX)
+		pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RDE);
+	else if (dir == DMA_DIR_TX)
+		pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_TDE);
+}
+
+/**
+ * pch_udc_set_csr_done() - Set the device control register
+ *				CSR done field (bit 13)
+ * @dev:	reference to structure of type pch_udc_regs
+ */
+static inline void pch_udc_set_csr_done(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_CSR_DONE);
+}
+
+/**
+ * pch_udc_disable_interrupts() - Disables the specified interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @mask:	Mask to disable interrupts
+ */
+static inline void pch_udc_disable_interrupts(struct pch_udc_dev *dev,
+					    u32 mask)
+{
+	pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_enable_interrupts() - Enable the specified interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @mask:	Mask to enable interrupts
+ */
+static inline void pch_udc_enable_interrupts(struct pch_udc_dev *dev,
+					   u32 mask)
+{
+	pch_udc_bit_clr(dev, UDC_DEVIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_disable_ep_interrupts() - Disable endpoint interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @mask:	Mask to disable interrupts
+ */
+static inline void pch_udc_disable_ep_interrupts(struct pch_udc_dev *dev,
+						u32 mask)
+{
+	pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_enable_ep_interrupts() - Enable endpoint interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @mask:	Mask to enable interrupts
+ */
+static inline void pch_udc_enable_ep_interrupts(struct pch_udc_dev *dev,
+					      u32 mask)
+{
+	pch_udc_bit_clr(dev, UDC_EPIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_read_device_interrupts() - Read the device interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * Retern	The device interrupts
+ */
+static inline u32 pch_udc_read_device_interrupts(struct pch_udc_dev *dev)
+{
+	return pch_udc_readl(dev, UDC_DEVIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_write_device_interrupts() - Write device interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @val:	The value to be written to interrupt register
+ */
+static inline void pch_udc_write_device_interrupts(struct pch_udc_dev *dev,
+						     u32 val)
+{
+	pch_udc_writel(dev, val, UDC_DEVIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_read_ep_interrupts() - Read the endpoint interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * Retern	The endpoint interrupt
+ */
+static inline u32 pch_udc_read_ep_interrupts(struct pch_udc_dev *dev)
+{
+	return pch_udc_readl(dev, UDC_EPIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_write_ep_interrupts() - Clear endpoint interupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @val:	The value to be written to interrupt register
+ */
+static inline void pch_udc_write_ep_interrupts(struct pch_udc_dev *dev,
+					     u32 val)
+{
+	pch_udc_writel(dev, val, UDC_EPIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_read_device_status() - Read the device status
+ * @dev:	Reference to structure of type pch_udc_regs
+ * Retern	The device status
+ */
+static inline u32 pch_udc_read_device_status(struct pch_udc_dev *dev)
+{
+	return pch_udc_readl(dev, UDC_DEVSTS_ADDR);
+}
+
+/**
+ * pch_udc_read_ep_control() - Read the endpoint control
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * Retern	The endpoint control register value
+ */
+static inline u32 pch_udc_read_ep_control(struct pch_udc_ep *ep)
+{
+	return pch_udc_ep_readl(ep, UDC_EPCTL_ADDR);
+}
+
+/**
+ * pch_udc_clear_ep_control() - Clear the endpoint control register
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * Retern	The endpoint control register value
+ */
+static inline void pch_udc_clear_ep_control(struct pch_udc_ep *ep)
+{
+	return pch_udc_ep_writel(ep, 0, UDC_EPCTL_ADDR);
+}
+
+/**
+ * pch_udc_read_ep_status() - Read the endpoint status
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * Retern	The endpoint status
+ */
+static inline u32 pch_udc_read_ep_status(struct pch_udc_ep *ep)
+{
+	return pch_udc_ep_readl(ep, UDC_EPSTS_ADDR);
+}
+
+/**
+ * pch_udc_clear_ep_status() - Clear the endpoint status
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @stat:	Endpoint status
+ */
+static inline void pch_udc_clear_ep_status(struct pch_udc_ep *ep,
+					 u32 stat)
+{
+	return pch_udc_ep_writel(ep, stat, UDC_EPSTS_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_nak() - Set the bit 7 (SNAK field)
+ *				of the endpoint control register
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_set_nak(struct pch_udc_ep *ep)
+{
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_SNAK);
+}
+
+/**
+ * pch_udc_ep_clear_nak() - Set the bit 8 (CNAK field)
+ *				of the endpoint control register
+ * @ep:		reference to structure of type pch_udc_ep_regs
+ */
+static void pch_udc_ep_clear_nak(struct pch_udc_ep *ep)
+{
+	unsigned int loopcnt = 0;
+	struct pch_udc_dev *dev = ep->dev;
+
+	if (!(pch_udc_ep_readl(ep, UDC_EPCTL_ADDR) & UDC_EPCTL_NAK))
+		return;
+	if (!ep->in) {
+		loopcnt = 10000;
+		while (!(pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP) &&
+			--loopcnt)
+			udelay(5);
+		if (!loopcnt)
+			dev_err(&dev->pdev->dev, "%s: RxFIFO not Empty\n",
+				__func__);
+	}
+	loopcnt = 10000;
+	while ((pch_udc_read_ep_control(ep) & UDC_EPCTL_NAK) && --loopcnt) {
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_CNAK);
+		udelay(5);
+	}
+	if (!loopcnt)
+		dev_err(&dev->pdev->dev, "%s: Clear NAK not set for ep%d%s\n",
+			__func__, ep->num, (ep->in ? "in" : "out"));
+}
+
+/**
+ * pch_udc_ep_fifo_flush() - Flush the endpoint fifo
+ * @ep:	reference to structure of type pch_udc_ep_regs
+ * @dir:	direction of endpoint
+ *		  0:  endpoint is OUT
+ *		  !0: endpoint is IN
+ */
+static void pch_udc_ep_fifo_flush(struct pch_udc_ep *ep, int dir)
+{
+	unsigned int loopcnt = 0;
+	struct pch_udc_dev *dev = ep->dev;
+
+	if (dir) {	/* IN ep */
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_F);
+		return;
+	}
+
+	if (pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP)
+		return;
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_MRXFLUSH);
+	/* Wait for RxFIFO Empty */
+	loopcnt = 10000;
+	while (!(pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP) &&
+		--loopcnt)
+		udelay(5);
+	if (!loopcnt)
+		dev_err(&dev->pdev->dev, "RxFIFO not Empty\n");
+	pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_MRXFLUSH);
+}
+
+/**
+ * pch_udc_ep_enable() - This api enables endpoint
+ * @regs:	Reference to structure pch_udc_ep_regs
+ * @desc:	endpoint descriptor
+ */
+static void pch_udc_ep_enable(struct pch_udc_ep *ep,
+			       struct pch_udc_cfg_data *cfg,
+			       const struct usb_endpoint_descriptor *desc)
+{
+	u32 val = 0;
+	u32 buff_size = 0;
+
+	pch_udc_ep_set_trfr_type(ep, desc->bmAttributes);
+	if (ep->in)
+		buff_size = UDC_EPIN_BUFF_SIZE;
+	else
+		buff_size = UDC_EPOUT_BUFF_SIZE;
+	pch_udc_ep_set_bufsz(ep, buff_size, ep->in);
+	pch_udc_ep_set_maxpkt(ep, le16_to_cpu(desc->wMaxPacketSize));
+	pch_udc_ep_set_nak(ep);
+	pch_udc_ep_fifo_flush(ep, ep->in);
+	/* Configure the endpoint */
+	val = ep->num << UDC_CSR_NE_NUM_SHIFT | ep->in << UDC_CSR_NE_DIR_SHIFT |
+	      ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) <<
+		UDC_CSR_NE_TYPE_SHIFT) |
+	      (cfg->cur_cfg << UDC_CSR_NE_CFG_SHIFT) |
+	      (cfg->cur_intf << UDC_CSR_NE_INTF_SHIFT) |
+	      (cfg->cur_alt << UDC_CSR_NE_ALT_SHIFT) |
+	      le16_to_cpu(desc->wMaxPacketSize) << UDC_CSR_NE_MAX_PKT_SHIFT;
+
+	if (ep->in)
+		pch_udc_write_csr(ep->dev, val, UDC_EPIN_IDX(ep->num));
+	else
+		pch_udc_write_csr(ep->dev, val, UDC_EPOUT_IDX(ep->num));
+}
+
+/**
+ * pch_udc_ep_disable() - This api disables endpoint
+ * @regs:	Reference to structure pch_udc_ep_regs
+ */
+static void pch_udc_ep_disable(struct pch_udc_ep *ep)
+{
+	if (ep->in) {
+		/* flush the fifo */
+		pch_udc_ep_writel(ep, UDC_EPCTL_F, UDC_EPCTL_ADDR);
+		/* set NAK */
+		pch_udc_ep_writel(ep, UDC_EPCTL_SNAK, UDC_EPCTL_ADDR);
+		pch_udc_ep_bit_set(ep, UDC_EPSTS_ADDR, UDC_EPSTS_IN);
+	} else {
+		/* set NAK */
+		pch_udc_ep_writel(ep, UDC_EPCTL_SNAK, UDC_EPCTL_ADDR);
+	}
+	/* reset desc pointer */
+	pch_udc_ep_writel(ep, 0, UDC_DESPTR_ADDR);
+}
+
+/**
+ * pch_udc_wait_ep_stall() - Wait EP stall.
+ * @dev:	Reference to pch_udc_dev structure
+ */
+static void pch_udc_wait_ep_stall(struct pch_udc_ep *ep)
+{
+	unsigned int count = 10000;
+
+	/* Wait till idle */
+	while ((pch_udc_read_ep_control(ep) & UDC_EPCTL_S) && --count)
+		udelay(5);
+	if (!count)
+		dev_err(&ep->dev->pdev->dev, "%s: wait error\n", __func__);
+}
+
+/**
+ * pch_udc_init() - This API initializes usb device controller
+ * @dev:	Rreference to pch_udc_regs structure
+ */
+static void pch_udc_init(struct pch_udc_dev *dev)
+{
+	if (NULL == dev) {
+		pr_err("%s: Invalid address\n", __func__);
+		return;
+	}
+	/* Soft Reset and Reset PHY */
+	pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
+	pch_udc_writel(dev, UDC_SRST | UDC_PSRST, UDC_SRST_ADDR);
+	mdelay(1);
+	pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
+	pch_udc_writel(dev, 0x00, UDC_SRST_ADDR);
+	mdelay(1);
+	/* mask and clear all device interrupts */
+	pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, UDC_DEVINT_MSK);
+	pch_udc_bit_set(dev, UDC_DEVIRQSTS_ADDR, UDC_DEVINT_MSK);
+
+	/* mask and clear all ep interrupts */
+	pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
+	pch_udc_bit_set(dev, UDC_EPIRQSTS_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
+
+	/* enable dynamic CSR programmingi, self powered and device speed */
+	if (speed_fs)
+		pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_CSR_PRG |
+				UDC_DEVCFG_SP | UDC_DEVCFG_SPD_FS);
+	else /* defaul high speed */
+		pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_CSR_PRG |
+				UDC_DEVCFG_SP | UDC_DEVCFG_SPD_HS);
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR,
+			(PCH_UDC_THLEN << UDC_DEVCTL_THLEN_SHIFT) |
+			(PCH_UDC_BRLEN << UDC_DEVCTL_BRLEN_SHIFT) |
+			UDC_DEVCTL_MODE | UDC_DEVCTL_BREN |
+			UDC_DEVCTL_THE);
+}
+
+/**
+ * pch_udc_exit() - This API exit usb device controller
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static void pch_udc_exit(struct pch_udc_dev *dev)
+{
+	/* mask all device interrupts */
+	pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, UDC_DEVINT_MSK);
+	/* mask all ep interrupts */
+	pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
+	/* put device in disconnected state */
+	pch_udc_set_disconnect(dev);
+}
+
+/**
+ * pch_udc_pcd_get_frame() - This API is invoked to get the current frame number
+ * @gadget:	Reference to the gadget driver
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_get_frame(struct usb_gadget *gadget)
+{
+	struct pch_udc_dev	*dev;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	return pch_udc_get_frame(dev);
+}
+
+/**
+ * pch_udc_pcd_wakeup() - This API is invoked to initiate a remote wakeup
+ * @gadget:	Reference to the gadget driver
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_wakeup(struct usb_gadget *gadget)
+{
+	struct pch_udc_dev	*dev;
+	unsigned long		flags;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	spin_lock_irqsave(&dev->lock, flags);
+	pch_udc_rmt_wakeup(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_selfpowered() - This API is invoked to specify whether the device
+ *				is self powered or not
+ * @gadget:	Reference to the gadget driver
+ * @value:	Specifies self powered or not
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_selfpowered(struct usb_gadget *gadget, int value)
+{
+	struct pch_udc_dev	*dev;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	if (value)
+		pch_udc_set_selfpowered(dev);
+	else
+		pch_udc_clear_selfpowered(dev);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_pullup() - This API is invoked to make the device
+ *				visible/invisible to the host
+ * @gadget:	Reference to the gadget driver
+ * @is_on:	Specifies whether the pull up is made active or inactive
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct pch_udc_dev	*dev;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	pch_udc_vbus_session(dev, is_on);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_vbus_session() - This API is used by a driver for an external
+ *				transceiver (or GPIO) that
+ *				detects a VBUS power session starting/ending
+ * @gadget:	Reference to the gadget driver
+ * @is_active:	specifies whether the session is starting or ending
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct pch_udc_dev	*dev;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	pch_udc_vbus_session(dev, is_active);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_vbus_draw() - This API is used by gadget drivers during
+ *				SET_CONFIGURATION calls to
+ *				specify how much power the device can consume
+ * @gadget:	Reference to the gadget driver
+ * @mA:		specifies the current limit in 2mA unit
+ *
+ * Return codes:
+ *	-EINVAL:	If the gadget passed is NULL
+ *	-EOPNOTSUPP:
+ */
+static int pch_udc_pcd_vbus_draw(struct usb_gadget *gadget, unsigned int mA)
+{
+	return -EOPNOTSUPP;
+}
+
+static const struct usb_gadget_ops pch_udc_ops = {
+	.get_frame = pch_udc_pcd_get_frame,
+	.wakeup = pch_udc_pcd_wakeup,
+	.set_selfpowered = pch_udc_pcd_selfpowered,
+	.pullup = pch_udc_pcd_pullup,
+	.vbus_session = pch_udc_pcd_vbus_session,
+	.vbus_draw = pch_udc_pcd_vbus_draw,
+};
+
+/**
+ * complete_req() - This API is invoked from the driver when processing
+ *			of a request is complete
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request structure
+ * @status:	Indicates the success/failure of completion
+ */
+static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req,
+								 int status)
+{
+	struct pch_udc_dev	*dev;
+	unsigned halted = ep->halted;
+
+	list_del_init(&req->queue);
+
+	/* set new status if pending */
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	dev = ep->dev;
+	if (req->dma_mapped) {
+		if (ep->in)
+			pci_unmap_single(dev->pdev, req->req.dma,
+					 req->req.length, PCI_DMA_TODEVICE);
+		else
+			pci_unmap_single(dev->pdev, req->req.dma,
+					 req->req.length, PCI_DMA_FROMDEVICE);
+		req->dma_mapped = 0;
+		req->req.dma = DMA_ADDR_INVALID;
+	}
+	ep->halted = 1;
+	spin_unlock(&dev->lock);
+	if (!ep->in)
+		pch_udc_ep_clear_rrdy(ep);
+	req->req.complete(&ep->ep, &req->req);
+	spin_lock(&dev->lock);
+	ep->halted = halted;
+}
+
+/**
+ * empty_req_queue() - This API empties the request queue of an endpoint
+ * @ep:		Reference to the endpoint structure
+ */
+static void empty_req_queue(struct pch_udc_ep *ep)
+{
+	struct pch_udc_request	*req;
+
+	ep->halted = 1;
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+		complete_req(ep, req, -ESHUTDOWN);	/* Remove from list */
+	}
+}
+
+/**
+ * pch_udc_free_dma_chain() - This function frees the DMA chain created
+ *				for the request
+ * @dev		Reference to the driver structure
+ * @req		Reference to the request to be freed
+ *
+ * Return codes:
+ *	0: Success
+ */
+static void pch_udc_free_dma_chain(struct pch_udc_dev *dev,
+				   struct pch_udc_request *req)
+{
+	struct pch_udc_data_dma_desc *td = req->td_data;
+	unsigned i = req->chain_len;
+
+	for (; i > 1; --i) {
+		dma_addr_t addr = (dma_addr_t)td->next;
+		/* do not free first desc., will be done by free for request */
+		td = phys_to_virt(addr);
+		pci_pool_free(dev->data_requests, td, addr);
+	}
+}
+
+/**
+ * pch_udc_create_dma_chain() - This function creates or reinitializes
+ *				a DMA chain
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request
+ * @buf_len:	The buffer length
+ * @gfp_flags:	Flags to be used while mapping the data buffer
+ *
+ * Return codes:
+ *	0:		success,
+ *	-ENOMEM:	pci_pool_alloc invocation fails
+ */
+static int pch_udc_create_dma_chain(struct pch_udc_ep *ep,
+				    struct pch_udc_request *req,
+				    unsigned long buf_len,
+				    gfp_t gfp_flags)
+{
+	struct pch_udc_data_dma_desc *td = req->td_data, *last;
+	unsigned long bytes = req->req.length, i = 0;
+	dma_addr_t dma_addr;
+	unsigned len = 1;
+
+	if (req->chain_len > 1)
+		pch_udc_free_dma_chain(ep->dev, req);
+
+	for (; ; bytes -= buf_len, ++len) {
+		if (ep->in)
+			td->status = PCH_UDC_BS_HST_BSY | min(buf_len, bytes);
+		else
+			td->status = PCH_UDC_BS_HST_BSY;
+
+		if (bytes <= buf_len)
+			break;
+
+		last = td;
+		td = pci_pool_alloc(ep->dev->data_requests, gfp_flags,
+				    &dma_addr);
+		if (!td)
+			goto nomem;
+
+		i += buf_len;
+		td->dataptr = req->req.dma + i;
+		last->next = dma_addr;
+	}
+
+	req->td_data_last = td;
+	td->status |= PCH_UDC_DMA_LAST;
+	td->next = req->td_data_phys;
+	req->chain_len = len;
+	return 0;
+
+nomem:
+	if (len > 1) {
+		req->chain_len = len;
+		pch_udc_free_dma_chain(ep->dev, req);
+	}
+	req->chain_len = 1;
+	return -ENOMEM;
+}
+
+/**
+ * prepare_dma() - This function creates and initializes the DMA chain
+ *			for the request
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request
+ * @gfp:	Flag to be used while mapping the data buffer
+ *
+ * Return codes:
+ *	0:		Success
+ *	Other 0:	linux error number on failure
+ */
+static int prepare_dma(struct pch_udc_ep *ep, struct pch_udc_request *req,
+			  gfp_t gfp)
+{
+	int	retval;
+
+	req->td_data->dataptr = req->req.dma;
+	req->td_data->status |= PCH_UDC_DMA_LAST;
+	/* Allocate and create a DMA chain */
+	retval = pch_udc_create_dma_chain(ep, req, ep->ep.maxpacket, gfp);
+	if (retval) {
+		pr_err("%s: could not create DMA chain: %d\n",
+		       __func__, retval);
+		return retval;
+	}
+	if (!ep->in)
+		return 0;
+	if (req->req.length <= ep->ep.maxpacket)
+		req->td_data->status = PCH_UDC_DMA_LAST | PCH_UDC_BS_HST_BSY |
+				       req->req.length;
+	/* if bytes < max packet then tx bytes must
+	 * be written in packet per buffer mode
+	 */
+	if ((req->req.length < ep->ep.maxpacket) || !ep->num)
+		req->td_data->status = (req->td_data->status &
+					~PCH_UDC_RXTX_BYTES) | req->req.length;
+	req->td_data->status = (req->td_data->status &
+				~PCH_UDC_BUFF_STS) | PCH_UDC_BS_HST_BSY;
+	return 0;
+}
+
+/**
+ * process_zlp() - This function process zero length packets
+ *			from the gadget driver
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request
+ */
+static void process_zlp(struct pch_udc_ep *ep, struct pch_udc_request *req)
+{
+	struct pch_udc_dev	*dev = ep->dev;
+
+	/* IN zlp's are handled by hardware */
+	complete_req(ep, req, 0);
+
+	/* if set_config or set_intf is waiting for ack by zlp
+	 * then set CSR_DONE
+	 */
+	if (dev->set_cfg_not_acked) {
+		pch_udc_set_csr_done(dev);
+		dev->set_cfg_not_acked = 0;
+	}
+	/* setup command is ACK'ed now by zlp */
+	if (!dev->stall && dev->waiting_zlp_ack) {
+		pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX]));
+		dev->waiting_zlp_ack = 0;
+	}
+}
+
+/**
+ * pch_udc_start_rxrequest() - This function starts the receive requirement.
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request structure
+ */
+static void pch_udc_start_rxrequest(struct pch_udc_ep *ep,
+					 struct pch_udc_request *req)
+{
+	struct pch_udc_data_dma_desc *td_data;
+
+	pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
+	td_data = req->td_data;
+	ep->td_data = req->td_data;
+	/* Set the status bits for all descriptors */
+	while (1) {
+		td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) |
+				    PCH_UDC_BS_HST_RDY;
+		if ((td_data->status & PCH_UDC_DMA_LAST) ==  PCH_UDC_DMA_LAST)
+			break;
+		td_data = phys_to_virt(td_data->next);
+	}
+	/* Write the descriptor pointer */
+	pch_udc_ep_set_ddptr(ep, req->td_data_phys);
+	req->dma_going = 1;
+	pch_udc_enable_ep_interrupts(ep->dev, UDC_EPINT_OUT_EP0 << ep->num);
+	pch_udc_set_dma(ep->dev, DMA_DIR_RX);
+	pch_udc_ep_clear_nak(ep);
+	pch_udc_ep_set_rrdy(ep);
+}
+
+/**
+ * pch_udc_pcd_ep_enable() - This API enables the endpoint. It is called
+ *				from gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @desc:	Reference to the USB endpoint descriptor structure
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:
+ *	-ESHUTDOWN:
+ */
+static int pch_udc_pcd_ep_enable(struct usb_ep *usbep,
+				    const struct usb_endpoint_descriptor *desc)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_dev	*dev;
+	unsigned long		iflags;
+
+	if (!usbep || (usbep->name == ep0_string) || !desc ||
+	    (desc->bDescriptorType != USB_DT_ENDPOINT) || !desc->wMaxPacketSize)
+		return -EINVAL;
+
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+	spin_lock_irqsave(&dev->lock, iflags);
+	ep->desc = desc;
+	ep->halted = 0;
+	pch_udc_ep_enable(ep, &ep->dev->cfg_data, desc);
+	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+	spin_unlock_irqrestore(&dev->lock, iflags);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_ep_disable() - This API disables endpoint and is called
+ *				from gadget driver
+ * @usbep	Reference to the USB endpoint structure
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:
+ */
+static int pch_udc_pcd_ep_disable(struct usb_ep *usbep)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_dev	*dev;
+	unsigned long	iflags;
+
+	if (!usbep)
+		return -EINVAL;
+
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	if ((usbep->name == ep0_string) || !ep->desc)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->dev->lock, iflags);
+	empty_req_queue(ep);
+	ep->halted = 1;
+	pch_udc_ep_disable(ep);
+	pch_udc_disable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+	ep->desc = NULL;
+	INIT_LIST_HEAD(&ep->queue);
+	spin_unlock_irqrestore(&ep->dev->lock, iflags);
+	return 0;
+}
+
+/**
+ * pch_udc_alloc_request() - This function allocates request structure.
+ *				It is called by gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @gfp:	Flag to be used while allocating memory
+ *
+ * Return codes:
+ *	NULL:			Failure
+ *	Allocated address:	Success
+ */
+static struct usb_request *pch_udc_alloc_request(struct usb_ep *usbep,
+						  gfp_t gfp)
+{
+	struct pch_udc_request		*req;
+	struct pch_udc_ep		*ep;
+	struct pch_udc_data_dma_desc	*dma_desc;
+	struct pch_udc_dev		*dev;
+
+	if (!usbep)
+		return NULL;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	req = kzalloc(sizeof *req, gfp);
+	if (!req)
+		return NULL;
+	req->req.dma = DMA_ADDR_INVALID;
+	INIT_LIST_HEAD(&req->queue);
+	if (!ep->dev->dma_addr)
+		return &req->req;
+	/* ep0 in requests are allocated from data pool here */
+	dma_desc = pci_pool_alloc(ep->dev->data_requests, gfp,
+				  &req->td_data_phys);
+	if (NULL == dma_desc) {
+		kfree(req);
+		return NULL;
+	}
+	/* prevent from using desc. - set HOST BUSY */
+	dma_desc->status |= PCH_UDC_BS_HST_BSY;
+	dma_desc->dataptr = __constant_cpu_to_le32(DMA_ADDR_INVALID);
+	req->td_data = dma_desc;
+	req->td_data_last = dma_desc;
+	req->chain_len = 1;
+	return &req->req;
+}
+
+/**
+ * pch_udc_free_request() - This function frees request structure.
+ *				It is called by gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @usbreq:	Reference to the USB request
+ */
+static void pch_udc_free_request(struct usb_ep *usbep,
+				  struct usb_request *usbreq)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_request	*req;
+	struct pch_udc_dev	*dev;
+
+	if (!usbep || !usbreq)
+		return;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	req = container_of(usbreq, struct pch_udc_request, req);
+	dev = ep->dev;
+	if (!list_empty(&req->queue))
+		dev_err(&dev->pdev->dev, "%s: %s req=0x%p queue not empty\n",
+			__func__, usbep->name, req);
+	if (req->td_data != NULL) {
+		if (req->chain_len > 1)
+			pch_udc_free_dma_chain(ep->dev, req);
+		pci_pool_free(ep->dev->data_requests, req->td_data,
+			      req->td_data_phys);
+	}
+	kfree(req);
+}
+
+/**
+ * pch_udc_pcd_queue() - This function queues a request packet. It is called
+ *			by gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @usbreq:	Reference to the USB request
+ * @gfp:	Flag to be used while mapping the data buffer
+ *
+ * Return codes:
+ *	0:			Success
+ *	linux error number:	Failure
+ */
+static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
+								 gfp_t gfp)
+{
+	int retval = 0;
+	struct pch_udc_ep	*ep;
+	struct pch_udc_dev	*dev;
+	struct pch_udc_request	*req;
+	unsigned long	iflags;
+
+	if (!usbep || !usbreq || !usbreq->complete || !usbreq->buf)
+		return -EINVAL;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	if (!ep->desc && ep->num)
+		return -EINVAL;
+	req = container_of(usbreq, struct pch_udc_request, req);
+	if (!list_empty(&req->queue))
+		return -EINVAL;
+	if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+	spin_lock_irqsave(&ep->dev->lock, iflags);
+	/* map the buffer for dma */
+	if (usbreq->length &&
+	    ((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) {
+		if (ep->in)
+			usbreq->dma = pci_map_single(dev->pdev, usbreq->buf,
+					usbreq->length, PCI_DMA_TODEVICE);
+		else
+			usbreq->dma = pci_map_single(dev->pdev, usbreq->buf,
+					usbreq->length, PCI_DMA_FROMDEVICE);
+		req->dma_mapped = 1;
+	}
+	if (usbreq->length > 0) {
+		retval = prepare_dma(ep, req, gfp);
+		if (retval)
+			goto probe_end;
+	}
+	usbreq->actual = 0;
+	usbreq->status = -EINPROGRESS;
+	req->dma_done = 0;
+	if (list_empty(&ep->queue) && !ep->halted) {
+		/* no pending transfer, so start this req */
+		if (!usbreq->length) {
+			process_zlp(ep, req);
+			retval = 0;
+			goto probe_end;
+		}
+		if (!ep->in) {
+			pch_udc_start_rxrequest(ep, req);
+		} else {
+			/*
+			* For IN trfr the descriptors will be programmed and
+			* P bit will be set when
+			* we get an IN token
+			*/
+			pch_udc_wait_ep_stall(ep);
+			pch_udc_ep_clear_nak(ep);
+			pch_udc_enable_ep_interrupts(ep->dev, (1 << ep->num));
+			pch_udc_set_dma(dev, DMA_DIR_TX);
+		}
+	}
+	/* Now add this request to the ep's pending requests */
+	if (req != NULL)
+		list_add_tail(&req->queue, &ep->queue);
+
+probe_end:
+	spin_unlock_irqrestore(&dev->lock, iflags);
+	return retval;
+}
+
+/**
+ * pch_udc_pcd_dequeue() - This function de-queues a request packet.
+ *				It is called by gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @usbreq:	Reference to the USB request
+ *
+ * Return codes:
+ *	0:			Success
+ *	linux error number:	Failure
+ */
+static int pch_udc_pcd_dequeue(struct usb_ep *usbep,
+				struct usb_request *usbreq)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_request	*req;
+	struct pch_udc_dev	*dev;
+	unsigned long		flags;
+	int ret = -EINVAL;
+
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	if (!usbep || !usbreq || (!ep->desc && ep->num))
+		return ret;
+	req = container_of(usbreq, struct pch_udc_request, req);
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	/* make sure it's still queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == usbreq) {
+			pch_udc_ep_set_nak(ep);
+			if (!list_empty(&req->queue))
+				complete_req(ep, req, -ECONNRESET);
+			ret = 0;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+	return ret;
+}
+
+/**
+ * pch_udc_pcd_set_halt() - This function Sets or clear the endpoint halt
+ *			    feature
+ * @usbep:	Reference to the USB endpoint structure
+ * @halt:	Specifies whether to set or clear the feature
+ *
+ * Return codes:
+ *	0:			Success
+ *	linux error number:	Failure
+ */
+static int pch_udc_pcd_set_halt(struct usb_ep *usbep, int halt)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_dev	*dev;
+	unsigned long iflags;
+	int ret;
+
+	if (!usbep)
+		return -EINVAL;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	if (!ep->desc && !ep->num)
+		return -EINVAL;
+	if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+	spin_lock_irqsave(&udc_stall_spinlock, iflags);
+	if (list_empty(&ep->queue)) {
+		if (halt) {
+			if (ep->num == PCH_UDC_EP0)
+				ep->dev->stall = 1;
+			pch_udc_ep_set_stall(ep);
+			pch_udc_enable_ep_interrupts(ep->dev,
+						     PCH_UDC_EPINT(ep->in,
+								   ep->num));
+		} else {
+			pch_udc_ep_clear_stall(ep);
+		}
+		ret = 0;
+	} else {
+		ret = -EAGAIN;
+	}
+	spin_unlock_irqrestore(&udc_stall_spinlock, iflags);
+	return ret;
+}
+
+/**
+ * pch_udc_pcd_set_wedge() - This function Sets or clear the endpoint
+ *				halt feature
+ * @usbep:	Reference to the USB endpoint structure
+ * @halt:	Specifies whether to set or clear the feature
+ *
+ * Return codes:
+ *	0:			Success
+ *	linux error number:	Failure
+ */
+static int pch_udc_pcd_set_wedge(struct usb_ep *usbep)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_dev	*dev;
+	unsigned long iflags;
+	int ret;
+
+	if (!usbep)
+		return -EINVAL;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	if (!ep->desc && !ep->num)
+		return -EINVAL;
+	if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+	spin_lock_irqsave(&udc_stall_spinlock, iflags);
+	if (!list_empty(&ep->queue)) {
+		ret = -EAGAIN;
+	} else {
+		if (ep->num == PCH_UDC_EP0)
+			ep->dev->stall = 1;
+		pch_udc_ep_set_stall(ep);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+		ep->dev->prot_stall = 1;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&udc_stall_spinlock, iflags);
+	return ret;
+}
+
+/**
+ * pch_udc_pcd_fifo_flush() - This function Flush the FIFO of specified endpoint
+ * @usbep:	Reference to the USB endpoint structure
+ */
+static void pch_udc_pcd_fifo_flush(struct usb_ep *usbep)
+{
+	struct pch_udc_ep  *ep;
+
+	if (!usbep)
+		return;
+
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	if (ep->desc || !ep->num)
+		pch_udc_ep_fifo_flush(ep, ep->in);
+}
+
+static const struct usb_ep_ops pch_udc_ep_ops = {
+	.enable		= pch_udc_pcd_ep_enable,
+	.disable	= pch_udc_pcd_ep_disable,
+	.alloc_request	= pch_udc_alloc_request,
+	.free_request	= pch_udc_free_request,
+	.queue		= pch_udc_pcd_queue,
+	.dequeue	= pch_udc_pcd_dequeue,
+	.set_halt	= pch_udc_pcd_set_halt,
+	.set_wedge	= pch_udc_pcd_set_wedge,
+	.fifo_status	= NULL,
+	.fifo_flush	= pch_udc_pcd_fifo_flush,
+};
+
+/**
+ * pch_udc_init_setup_buff() - This function initializes the SETUP buffer
+ * @td_stp:	Reference to the SETP buffer structure
+ */
+static void pch_udc_init_setup_buff(struct pch_udc_stp_dma_desc *td_stp)
+{
+	static u32	pky_marker;
+
+	if (!td_stp)
+		return;
+	td_stp->reserved = ++pky_marker;
+	memset(&td_stp->request, 0xFF, sizeof td_stp->request);
+	td_stp->status = PCH_UDC_BS_HST_RDY;
+}
+
+/**
+ * pch_udc_start_next_txrequest() - This function starts
+ *					the next transmission requirement
+ * @ep:	Reference to the endpoint structure
+ */
+static void pch_udc_start_next_txrequest(struct pch_udc_ep *ep)
+{
+	struct pch_udc_request *req;
+	struct pch_udc_data_dma_desc *td_data;
+
+	if (pch_udc_read_ep_control(ep) & UDC_EPCTL_P)
+		return;
+
+	if (list_empty(&ep->queue))
+		return;
+
+	/* next request */
+	req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+	if (req->dma_going)
+		return;
+	if (!req->td_data)
+		return;
+	pch_udc_wait_ep_stall(ep);
+	req->dma_going = 1;
+	pch_udc_ep_set_ddptr(ep, 0);
+	td_data = req->td_data;
+	while (1) {
+		td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) |
+				   PCH_UDC_BS_HST_RDY;
+		if ((td_data->status & PCH_UDC_DMA_LAST) == PCH_UDC_DMA_LAST)
+			break;
+		td_data = phys_to_virt(td_data->next);
+	}
+	pch_udc_ep_set_ddptr(ep, req->td_data_phys);
+	pch_udc_set_dma(ep->dev, DMA_DIR_TX);
+	pch_udc_ep_set_pd(ep);
+	pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+	pch_udc_ep_clear_nak(ep);
+}
+
+/**
+ * pch_udc_complete_transfer() - This function completes a transfer
+ * @ep:		Reference to the endpoint structure
+ */
+static void pch_udc_complete_transfer(struct pch_udc_ep *ep)
+{
+	struct pch_udc_request *req;
+	struct pch_udc_dev *dev = ep->dev;
+
+	if (list_empty(&ep->queue))
+		return;
+	req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+	if ((req->td_data_last->status & PCH_UDC_BUFF_STS) !=
+	    PCH_UDC_BS_DMA_DONE)
+		return;
+	if ((req->td_data_last->status & PCH_UDC_RXTX_STS) !=
+	     PCH_UDC_RTS_SUCC) {
+		dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) "
+			"epstatus=0x%08x\n",
+		       (req->td_data_last->status & PCH_UDC_RXTX_STS),
+		       (int)(ep->epsts));
+		return;
+	}
+
+	req->req.actual = req->req.length;
+	req->td_data_last->status = PCH_UDC_BS_HST_BSY | PCH_UDC_DMA_LAST;
+	req->td_data->status = PCH_UDC_BS_HST_BSY | PCH_UDC_DMA_LAST;
+	complete_req(ep, req, 0);
+	req->dma_going = 0;
+	if (!list_empty(&ep->queue)) {
+		pch_udc_wait_ep_stall(ep);
+		pch_udc_ep_clear_nak(ep);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+	} else {
+		pch_udc_disable_ep_interrupts(ep->dev,
+					      PCH_UDC_EPINT(ep->in, ep->num));
+	}
+}
+
+/**
+ * pch_udc_complete_receiver() - This function completes a receiver
+ * @ep:		Reference to the endpoint structure
+ */
+static void pch_udc_complete_receiver(struct pch_udc_ep *ep)
+{
+	struct pch_udc_request *req;
+	struct pch_udc_dev *dev = ep->dev;
+	unsigned int count;
+
+	if (list_empty(&ep->queue))
+		return;
+
+	/* next request */
+	req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+	if ((req->td_data_last->status & PCH_UDC_BUFF_STS) !=
+	    PCH_UDC_BS_DMA_DONE)
+		return;
+	pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
+	if ((req->td_data_last->status & PCH_UDC_RXTX_STS) !=
+	    PCH_UDC_RTS_SUCC) {
+		dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) "
+			"epstatus=0x%08x\n",
+			(req->td_data_last->status & PCH_UDC_RXTX_STS),
+			(int)(ep->epsts));
+		return;
+	}
+	count = req->td_data_last->status & PCH_UDC_RXTX_BYTES;
+
+	/* on 64k packets the RXBYTES field is zero */
+	if (!count && (req->req.length == UDC_DMA_MAXPACKET))
+		count = UDC_DMA_MAXPACKET;
+	req->td_data->status |= PCH_UDC_DMA_LAST;
+	req->td_data_last->status |= PCH_UDC_BS_HST_BSY;
+
+	req->dma_going = 0;
+	req->req.actual = count;
+	complete_req(ep, req, 0);
+	/* If there is a new/failed requests try that now */
+	if (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+		pch_udc_start_rxrequest(ep, req);
+	}
+}
+
+/**
+ * pch_udc_svc_data_in() - This function process endpoint interrupts
+ *				for IN endpoints
+ * @dev:	Reference to the device structure
+ * @ep_num:	Endpoint that generated the interrupt
+ */
+static void pch_udc_svc_data_in(struct pch_udc_dev *dev, int ep_num)
+{
+	u32	epsts;
+	struct pch_udc_ep	*ep;
+
+	ep = &dev->ep[2*ep_num];
+	epsts = ep->epsts;
+	ep->epsts = 0;
+
+	if (!(epsts & (UDC_EPSTS_IN | UDC_EPSTS_BNA  | UDC_EPSTS_HE |
+		       UDC_EPSTS_TDC | UDC_EPSTS_RCS | UDC_EPSTS_TXEMPTY |
+		       UDC_EPSTS_RSS | UDC_EPSTS_XFERDONE)))
+		return;
+	if ((epsts & UDC_EPSTS_BNA))
+		return;
+	if (epsts & UDC_EPSTS_HE)
+		return;
+	if (epsts & UDC_EPSTS_RSS) {
+		pch_udc_ep_set_stall(ep);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+	}
+	if (epsts & UDC_EPSTS_RCS) {
+		if (!dev->prot_stall) {
+			pch_udc_ep_clear_stall(ep);
+		} else {
+			pch_udc_ep_set_stall(ep);
+			pch_udc_enable_ep_interrupts(ep->dev,
+						PCH_UDC_EPINT(ep->in, ep->num));
+		}
+	}
+	if (epsts & UDC_EPSTS_TDC)
+		pch_udc_complete_transfer(ep);
+	/* On IN interrupt, provide data if we have any */
+	if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_RSS) &&
+	    !(epsts & UDC_EPSTS_TDC) && !(epsts & UDC_EPSTS_TXEMPTY))
+		pch_udc_start_next_txrequest(ep);
+}
+
+/**
+ * pch_udc_svc_data_out() - Handles interrupts from OUT endpoint
+ * @dev:	Reference to the device structure
+ * @ep_num:	Endpoint that generated the interrupt
+ */
+static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
+{
+	u32			epsts;
+	struct pch_udc_ep		*ep;
+	struct pch_udc_request		*req = NULL;
+
+	ep = &dev->ep[2*ep_num + 1];
+	epsts = ep->epsts;
+	ep->epsts = 0;
+
+	if ((epsts & UDC_EPSTS_BNA) && (!list_empty(&ep->queue))) {
+		/* next request */
+		req = list_entry(ep->queue.next, struct pch_udc_request,
+				 queue);
+		if ((req->td_data_last->status & PCH_UDC_BUFF_STS) !=
+		     PCH_UDC_BS_DMA_DONE) {
+			if (!req->dma_going)
+				pch_udc_start_rxrequest(ep, req);
+			return;
+		}
+	}
+	if (epsts & UDC_EPSTS_HE)
+		return;
+	if (epsts & UDC_EPSTS_RSS)
+		pch_udc_ep_set_stall(ep);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+	if (epsts & UDC_EPSTS_RCS) {
+		if (!dev->prot_stall) {
+			pch_udc_ep_clear_stall(ep);
+		} else {
+			pch_udc_ep_set_stall(ep);
+			pch_udc_enable_ep_interrupts(ep->dev,
+						PCH_UDC_EPINT(ep->in, ep->num));
+		}
+	}
+	if (((epsts & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
+	    UDC_EPSTS_OUT_DATA) {
+		if (ep->dev->prot_stall == 1) {
+			pch_udc_ep_set_stall(ep);
+			pch_udc_enable_ep_interrupts(ep->dev,
+						PCH_UDC_EPINT(ep->in, ep->num));
+		} else {
+			pch_udc_complete_receiver(ep);
+		}
+	}
+	if (list_empty(&ep->queue))
+		pch_udc_set_dma(dev, DMA_DIR_RX);
+}
+
+/**
+ * pch_udc_svc_control_in() - Handle Control IN endpoint interrupts
+ * @dev:	Reference to the device structure
+ */
+static void pch_udc_svc_control_in(struct pch_udc_dev *dev)
+{
+	u32	epsts;
+	struct pch_udc_ep	*ep;
+
+	ep = &dev->ep[UDC_EP0IN_IDX];
+	epsts = ep->epsts;
+	ep->epsts = 0;
+
+	if (!(epsts & (UDC_EPSTS_IN | UDC_EPSTS_BNA | UDC_EPSTS_HE |
+		       UDC_EPSTS_TDC | UDC_EPSTS_RCS | UDC_EPSTS_TXEMPTY |
+		       UDC_EPSTS_XFERDONE)))
+		return;
+	if ((epsts & UDC_EPSTS_BNA))
+		return;
+	if (epsts & UDC_EPSTS_HE)
+		return;
+	if ((epsts & UDC_EPSTS_TDC) && (!dev->stall))
+		pch_udc_complete_transfer(ep);
+	/* On IN interrupt, provide data if we have any */
+	if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_TDC) &&
+	     !(epsts & UDC_EPSTS_TXEMPTY))
+		pch_udc_start_next_txrequest(ep);
+}
+
+/**
+ * pch_udc_svc_control_out() - Routine that handle Control
+ *					OUT endpoint interrupts
+ * @dev:	Reference to the device structure
+ */
+static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
+{
+	u32	stat;
+	int setup_supported;
+	struct pch_udc_ep	*ep;
+
+	ep = &dev->ep[UDC_EP0OUT_IDX];
+	stat = ep->epsts;
+	ep->epsts = 0;
+
+	/* If setup data */
+	if (((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
+	    UDC_EPSTS_OUT_SETUP) {
+		dev->stall = 0;
+		dev->ep[UDC_EP0IN_IDX].halted = 0;
+		dev->ep[UDC_EP0OUT_IDX].halted = 0;
+		/* In data not ready */
+		pch_udc_ep_set_nak(&(dev->ep[UDC_EP0IN_IDX]));
+		dev->setup_data = ep->td_stp->request;
+		pch_udc_init_setup_buff(ep->td_stp);
+		pch_udc_clear_dma(dev, DMA_DIR_TX);
+		pch_udc_ep_fifo_flush(&(dev->ep[UDC_EP0IN_IDX]),
+				      dev->ep[UDC_EP0IN_IDX].in);
+		if ((dev->setup_data.bRequestType & USB_DIR_IN))
+			dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep;
+		else /* OUT */
+			dev->gadget.ep0 = &ep->ep;
+		spin_unlock(&dev->lock);
+		/* If Mass storage Reset */
+		if ((dev->setup_data.bRequestType == 0x21) &&
+		    (dev->setup_data.bRequest == 0xFF))
+			dev->prot_stall = 0;
+		/* call gadget with setup data received */
+		setup_supported = dev->driver->setup(&dev->gadget,
+						     &dev->setup_data);
+		spin_lock(&dev->lock);
+		/* ep0 in returns data on IN phase */
+		if (setup_supported >= 0 && setup_supported <
+					    UDC_EP0IN_MAX_PKT_SIZE) {
+			pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX]));
+			/* Gadget would have queued a request when
+			 * we called the setup */
+			pch_udc_set_dma(dev, DMA_DIR_RX);
+			pch_udc_ep_clear_nak(ep);
+		} else if (setup_supported < 0) {
+			/* if unsupported request, then stall */
+			pch_udc_ep_set_stall(&(dev->ep[UDC_EP0IN_IDX]));
+			pch_udc_enable_ep_interrupts(ep->dev,
+						PCH_UDC_EPINT(ep->in, ep->num));
+			dev->stall = 0;
+			pch_udc_set_dma(dev, DMA_DIR_RX);
+		} else {
+			dev->waiting_zlp_ack = 1;
+		}
+	} else if ((((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
+		     UDC_EPSTS_OUT_DATA) && !dev->stall) {
+		if (list_empty(&ep->queue)) {
+			dev_err(&dev->pdev->dev, "%s: No request\n", __func__);
+			ep->td_data->status = (ep->td_data->status &
+					       ~PCH_UDC_BUFF_STS) |
+					       PCH_UDC_BS_HST_RDY;
+			pch_udc_set_dma(dev, DMA_DIR_RX);
+		} else {
+			/* control write */
+			/* next function will pickuo an clear the status */
+			ep->epsts = stat;
+
+			pch_udc_svc_data_out(dev, 0);
+			/* re-program desc. pointer for possible ZLPs */
+			pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
+			pch_udc_set_dma(dev, DMA_DIR_RX);
+		}
+	}
+	pch_udc_ep_set_rrdy(ep);
+}
+
+
+/**
+ * pch_udc_postsvc_epinters() - This function enables end point interrupts
+ *				and clears NAK status
+ * @dev:	Reference to the device structure
+ * @ep_num:	End point number
+ */
+static void pch_udc_postsvc_epinters(struct pch_udc_dev *dev, int ep_num)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_request *req;
+
+	ep = &dev->ep[2*ep_num];
+	if (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+		pch_udc_ep_clear_nak(ep);
+	}
+}
+
+/**
+ * pch_udc_read_all_epstatus() - This function read all endpoint status
+ * @dev:	Reference to the device structure
+ * @ep_intr:	Status of endpoint interrupt
+ */
+static void pch_udc_read_all_epstatus(struct pch_udc_dev *dev, u32 ep_intr)
+{
+	int i;
+	struct pch_udc_ep	*ep;
+
+	for (i = 0; i < PCH_UDC_USED_EP_NUM; i++) {
+		/* IN */
+		if (ep_intr & (0x1 << i)) {
+			ep = &dev->ep[2*i];
+			ep->epsts = pch_udc_read_ep_status(ep);
+			pch_udc_clear_ep_status(ep, ep->epsts);
+		}
+		/* OUT */
+		if (ep_intr & (0x10000 << i)) {
+			ep = &dev->ep[2*i+1];
+			ep->epsts = pch_udc_read_ep_status(ep);
+			pch_udc_clear_ep_status(ep, ep->epsts);
+		}
+	}
+}
+
+/**
+ * pch_udc_activate_control_ep() - This function enables the control endpoints
+ *					for traffic after a reset
+ * @dev:	Reference to the device structure
+ */
+static void pch_udc_activate_control_ep(struct pch_udc_dev *dev)
+{
+	struct pch_udc_ep	*ep;
+	u32 val;
+
+	/* Setup the IN endpoint */
+	ep = &dev->ep[UDC_EP0IN_IDX];
+	pch_udc_clear_ep_control(ep);
+	pch_udc_ep_fifo_flush(ep, ep->in);
+	pch_udc_ep_set_bufsz(ep, UDC_EP0IN_BUFF_SIZE, ep->in);
+	pch_udc_ep_set_maxpkt(ep, UDC_EP0IN_MAX_PKT_SIZE);
+	/* Initialize the IN EP Descriptor */
+	ep->td_data      = NULL;
+	ep->td_stp       = NULL;
+	ep->td_data_phys = 0;
+	ep->td_stp_phys  = 0;
+
+	/* Setup the OUT endpoint */
+	ep = &dev->ep[UDC_EP0OUT_IDX];
+	pch_udc_clear_ep_control(ep);
+	pch_udc_ep_fifo_flush(ep, ep->in);
+	pch_udc_ep_set_bufsz(ep, UDC_EP0OUT_BUFF_SIZE, ep->in);
+	pch_udc_ep_set_maxpkt(ep, UDC_EP0OUT_MAX_PKT_SIZE);
+	val = UDC_EP0OUT_MAX_PKT_SIZE << UDC_CSR_NE_MAX_PKT_SHIFT;
+	pch_udc_write_csr(ep->dev, val, UDC_EP0OUT_IDX);
+
+	/* Initialize the SETUP buffer */
+	pch_udc_init_setup_buff(ep->td_stp);
+	/* Write the pointer address of dma descriptor */
+	pch_udc_ep_set_subptr(ep, ep->td_stp_phys);
+	/* Write the pointer address of Setup descriptor */
+	pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
+
+	/* Initialize the dma descriptor */
+	ep->td_data->status  = PCH_UDC_DMA_LAST;
+	ep->td_data->dataptr = dev->dma_addr;
+	ep->td_data->next    = ep->td_data_phys;
+
+	pch_udc_ep_clear_nak(ep);
+}
+
+
+/**
+ * pch_udc_svc_ur_interrupt() - This function handles a USB reset interrupt
+ * @dev:	Reference to driver structure
+ */
+static void pch_udc_svc_ur_interrupt(struct pch_udc_dev *dev)
+{
+	struct pch_udc_ep	*ep;
+	int i;
+
+	pch_udc_clear_dma(dev, DMA_DIR_TX);
+	pch_udc_clear_dma(dev, DMA_DIR_RX);
+	/* Mask all endpoint interrupts */
+	pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+	/* clear all endpoint interrupts */
+	pch_udc_write_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+
+	for (i = 0; i < PCH_UDC_EP_NUM; i++) {
+		ep = &dev->ep[i];
+		pch_udc_clear_ep_status(ep, UDC_EPSTS_ALL_CLR_MASK);
+		pch_udc_clear_ep_control(ep);
+		pch_udc_ep_set_ddptr(ep, 0);
+		pch_udc_write_csr(ep->dev, 0x00, i);
+	}
+	dev->stall = 0;
+	dev->prot_stall = 0;
+	dev->waiting_zlp_ack = 0;
+	dev->set_cfg_not_acked = 0;
+
+	/* disable ep to empty req queue. Skip the control EP's */
+	for (i = 0; i < (PCH_UDC_USED_EP_NUM*2); i++) {
+		ep = &dev->ep[i];
+		pch_udc_ep_set_nak(ep);
+		pch_udc_ep_fifo_flush(ep, ep->in);
+		/* Complete request queue */
+		empty_req_queue(ep);
+	}
+	if (dev->driver && dev->driver->disconnect)
+		dev->driver->disconnect(&dev->gadget);
+}
+
+/**
+ * pch_udc_svc_enum_interrupt() - This function handles a USB speed enumeration
+ *				done interrupt
+ * @dev:	Reference to driver structure
+ */
+static void pch_udc_svc_enum_interrupt(struct pch_udc_dev *dev)
+{
+	u32 dev_stat, dev_speed;
+	u32 speed = USB_SPEED_FULL;
+
+	dev_stat = pch_udc_read_device_status(dev);
+	dev_speed = (dev_stat & UDC_DEVSTS_ENUM_SPEED_MASK) >>
+						 UDC_DEVSTS_ENUM_SPEED_SHIFT;
+	switch (dev_speed) {
+	case UDC_DEVSTS_ENUM_SPEED_HIGH:
+		speed = USB_SPEED_HIGH;
+		break;
+	case  UDC_DEVSTS_ENUM_SPEED_FULL:
+		speed = USB_SPEED_FULL;
+		break;
+	case  UDC_DEVSTS_ENUM_SPEED_LOW:
+		speed = USB_SPEED_LOW;
+		break;
+	default:
+		BUG();
+	}
+	dev->gadget.speed = speed;
+	pch_udc_activate_control_ep(dev);
+	pch_udc_enable_ep_interrupts(dev, UDC_EPINT_IN_EP0 | UDC_EPINT_OUT_EP0);
+	pch_udc_set_dma(dev, DMA_DIR_TX);
+	pch_udc_set_dma(dev, DMA_DIR_RX);
+	pch_udc_ep_set_rrdy(&(dev->ep[UDC_EP0OUT_IDX]));
+}
+
+/**
+ * pch_udc_svc_intf_interrupt() - This function handles a set interface
+ *				  interrupt
+ * @dev:	Reference to driver structure
+ */
+static void pch_udc_svc_intf_interrupt(struct pch_udc_dev *dev)
+{
+	u32 reg, dev_stat = 0;
+	int i, ret;
+
+	dev_stat = pch_udc_read_device_status(dev);
+	dev->cfg_data.cur_intf = (dev_stat & UDC_DEVSTS_INTF_MASK) >>
+							 UDC_DEVSTS_INTF_SHIFT;
+	dev->cfg_data.cur_alt = (dev_stat & UDC_DEVSTS_ALT_MASK) >>
+							 UDC_DEVSTS_ALT_SHIFT;
+	dev->set_cfg_not_acked = 1;
+	/* Construct the usb request for gadget driver and inform it */
+	memset(&dev->setup_data, 0 , sizeof dev->setup_data);
+	dev->setup_data.bRequest = USB_REQ_SET_INTERFACE;
+	dev->setup_data.bRequestType = USB_RECIP_INTERFACE;
+	dev->setup_data.wValue = cpu_to_le16(dev->cfg_data.cur_alt);
+	dev->setup_data.wIndex = cpu_to_le16(dev->cfg_data.cur_intf);
+	/* programm the Endpoint Cfg registers */
+	/* Only one end point cfg register */
+	reg = pch_udc_read_csr(dev, UDC_EP0OUT_IDX);
+	reg = (reg & ~UDC_CSR_NE_INTF_MASK) |
+	      (dev->cfg_data.cur_intf << UDC_CSR_NE_INTF_SHIFT);
+	reg = (reg & ~UDC_CSR_NE_ALT_MASK) |
+	      (dev->cfg_data.cur_alt << UDC_CSR_NE_ALT_SHIFT);
+	pch_udc_write_csr(dev, reg, UDC_EP0OUT_IDX);
+	for (i = 0; i < PCH_UDC_USED_EP_NUM * 2; i++) {
+		/* clear stall bits */
+		pch_udc_ep_clear_stall(&(dev->ep[i]));
+		dev->ep[i].halted = 0;
+	}
+	dev->stall = 0;
+	spin_unlock(&dev->lock);
+	ret = dev->driver->setup(&dev->gadget, &dev->setup_data);
+	spin_lock(&dev->lock);
+}
+
+/**
+ * pch_udc_svc_cfg_interrupt() - This function handles a set configuration
+ *				interrupt
+ * @dev:	Reference to driver structure
+ */
+static void pch_udc_svc_cfg_interrupt(struct pch_udc_dev *dev)
+{
+	int i, ret;
+	u32 reg, dev_stat = 0;
+
+	dev_stat = pch_udc_read_device_status(dev);
+	dev->set_cfg_not_acked = 1;
+	dev->cfg_data.cur_cfg = (dev_stat & UDC_DEVSTS_CFG_MASK) >>
+				UDC_DEVSTS_CFG_SHIFT;
+	/* make usb request for gadget driver */
+	memset(&dev->setup_data, 0 , sizeof dev->setup_data);
+	dev->setup_data.bRequest = USB_REQ_SET_CONFIGURATION;
+	dev->setup_data.wValue = cpu_to_le16(dev->cfg_data.cur_cfg);
+	/* program the NE registers */
+	/* Only one end point cfg register */
+	reg = pch_udc_read_csr(dev, UDC_EP0OUT_IDX);
+	reg = (reg & ~UDC_CSR_NE_CFG_MASK) |
+	      (dev->cfg_data.cur_cfg << UDC_CSR_NE_CFG_SHIFT);
+	pch_udc_write_csr(dev, reg, UDC_EP0OUT_IDX);
+	for (i = 0; i < PCH_UDC_USED_EP_NUM * 2; i++) {
+		/* clear stall bits */
+		pch_udc_ep_clear_stall(&(dev->ep[i]));
+		dev->ep[i].halted = 0;
+	}
+	dev->stall = 0;
+
+	/* call gadget zero with setup data received */
+	spin_unlock(&dev->lock);
+	ret = dev->driver->setup(&dev->gadget, &dev->setup_data);
+	spin_lock(&dev->lock);
+}
+
+/**
+ * pch_udc_dev_isr() - This function services device interrupts
+ *			by invoking appropriate routines.
+ * @dev:	Reference to the device structure
+ * @dev_intr:	The Device interrupt status.
+ */
+static void pch_udc_dev_isr(struct pch_udc_dev *dev, u32 dev_intr)
+{
+	/* USB Reset Interrupt */
+	if (dev_intr & UDC_DEVINT_UR)
+		pch_udc_svc_ur_interrupt(dev);
+	/* Enumeration Done Interrupt */
+	if (dev_intr & UDC_DEVINT_ENUM)
+		pch_udc_svc_enum_interrupt(dev);
+	/* Set Interface Interrupt */
+	if (dev_intr & UDC_DEVINT_SI)
+		pch_udc_svc_intf_interrupt(dev);
+	/* Set Config Interrupt */
+	if (dev_intr & UDC_DEVINT_SC)
+		pch_udc_svc_cfg_interrupt(dev);
+	/* USB Suspend interrupt */
+	if (dev_intr & UDC_DEVINT_US)
+		dev_dbg(&dev->pdev->dev, "USB_SUSPEND\n");
+	/* Clear the SOF interrupt, if enabled */
+	if (dev_intr & UDC_DEVINT_SOF)
+		dev_dbg(&dev->pdev->dev, "SOF\n");
+	/* ES interrupt, IDLE > 3ms on the USB */
+	if (dev_intr & UDC_DEVINT_ES)
+		dev_dbg(&dev->pdev->dev, "ES\n");
+	/* RWKP interrupt */
+	if (dev_intr & UDC_DEVINT_RWKP)
+		dev_dbg(&dev->pdev->dev, "RWKP\n");
+}
+
+/**
+ * pch_udc_isr() - This function handles interrupts from the PCH USB Device
+ * @irq:	Interrupt request number
+ * @dev:	Reference to the device structure
+ */
+static irqreturn_t pch_udc_isr(int irq, void *pdev)
+{
+	struct pch_udc_dev *dev = (struct pch_udc_dev *) pdev;
+	u32 dev_intr, ep_intr;
+	int i;
+
+	dev_intr = pch_udc_read_device_interrupts(dev);
+	ep_intr = pch_udc_read_ep_interrupts(dev);
+
+	if (dev_intr)
+		/* Clear device interrupts */
+		pch_udc_write_device_interrupts(dev, dev_intr);
+	if (ep_intr)
+		/* Clear ep interrupts */
+		pch_udc_write_ep_interrupts(dev, ep_intr);
+	if (!dev_intr && !ep_intr)
+		return IRQ_NONE;
+	spin_lock(&dev->lock);
+	if (dev_intr)
+		pch_udc_dev_isr(dev, dev_intr);
+	if (ep_intr) {
+		pch_udc_read_all_epstatus(dev, ep_intr);
+		/* Process Control In interrupts, if present */
+		if (ep_intr & UDC_EPINT_IN_EP0) {
+			pch_udc_svc_control_in(dev);
+			pch_udc_postsvc_epinters(dev, 0);
+		}
+		/* Process Control Out interrupts, if present */
+		if (ep_intr & UDC_EPINT_OUT_EP0)
+			pch_udc_svc_control_out(dev);
+		/* Process data in end point interrupts */
+		for (i = 1; i < PCH_UDC_USED_EP_NUM; i++) {
+			if (ep_intr & (1 <<  i)) {
+				pch_udc_svc_data_in(dev, i);
+				pch_udc_postsvc_epinters(dev, i);
+			}
+		}
+		/* Process data out end point interrupts */
+		for (i = UDC_EPINT_OUT_SHIFT + 1; i < (UDC_EPINT_OUT_SHIFT +
+						 PCH_UDC_USED_EP_NUM); i++)
+			if (ep_intr & (1 <<  i))
+				pch_udc_svc_data_out(dev, i -
+							 UDC_EPINT_OUT_SHIFT);
+	}
+	spin_unlock(&dev->lock);
+	return IRQ_HANDLED;
+}
+
+/**
+ * pch_udc_setup_ep0() - This function enables control endpoint for traffic
+ * @dev:	Reference to the device structure
+ */
+static void pch_udc_setup_ep0(struct pch_udc_dev *dev)
+{
+	/* enable ep0 interrupts */
+	pch_udc_enable_ep_interrupts(dev, UDC_EPINT_IN_EP0 |
+						UDC_EPINT_OUT_EP0);
+	/* enable device interrupts */
+	pch_udc_enable_interrupts(dev, UDC_DEVINT_UR | UDC_DEVINT_US |
+				       UDC_DEVINT_ES | UDC_DEVINT_ENUM |
+				       UDC_DEVINT_SI | UDC_DEVINT_SC);
+}
+
+/**
+ * gadget_release() - Free the gadget driver private data
+ * @pdev	reference to struct pci_dev
+ */
+static void gadget_release(struct device *pdev)
+{
+	struct pch_udc_dev *dev = dev_get_drvdata(pdev);
+
+	kfree(dev);
+}
+
+/**
+ * pch_udc_pcd_reinit() - This API initializes the endpoint structures
+ * @dev:	Reference to the driver structure
+ */
+static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
+{
+	const char *const ep_string[] = {
+		ep0_string, "ep0out", "ep1in", "ep1out", "ep2in", "ep2out",
+		"ep3in", "ep3out", "ep4in", "ep4out", "ep5in", "ep5out",
+		"ep6in", "ep6out", "ep7in", "ep7out", "ep8in", "ep8out",
+		"ep9in", "ep9out", "ep10in", "ep10out", "ep11in", "ep11out",
+		"ep12in", "ep12out", "ep13in", "ep13out", "ep14in", "ep14out",
+		"ep15in", "ep15out",
+	};
+	int i;
+
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+	INIT_LIST_HEAD(&dev->gadget.ep_list);
+
+	/* Initialize the endpoints structures */
+	memset(dev->ep, 0, sizeof dev->ep);
+	for (i = 0; i < PCH_UDC_EP_NUM; i++) {
+		struct pch_udc_ep *ep = &dev->ep[i];
+		ep->dev = dev;
+		ep->halted = 1;
+		ep->num = i / 2;
+		ep->in = ~i & 1;
+		ep->ep.name = ep_string[i];
+		ep->ep.ops = &pch_udc_ep_ops;
+		if (ep->in)
+			ep->offset_addr = ep->num * UDC_EP_REG_SHIFT;
+		else
+			ep->offset_addr = (UDC_EPINT_OUT_SHIFT + ep->num) *
+					  UDC_EP_REG_SHIFT;
+		/* need to set ep->ep.maxpacket and set Default Configuration?*/
+		ep->ep.maxpacket = UDC_BULK_MAX_PKT_SIZE;
+		list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
+		INIT_LIST_HEAD(&ep->queue);
+	}
+	dev->ep[UDC_EP0IN_IDX].ep.maxpacket = UDC_EP0IN_MAX_PKT_SIZE;
+	dev->ep[UDC_EP0OUT_IDX].ep.maxpacket = UDC_EP0OUT_MAX_PKT_SIZE;
+
+	dev->dma_addr = pci_map_single(dev->pdev, dev->ep0out_buf, 256,
+				  PCI_DMA_FROMDEVICE);
+
+	/* remove ep0 in and out from the list.  They have own pointer */
+	list_del_init(&dev->ep[UDC_EP0IN_IDX].ep.ep_list);
+	list_del_init(&dev->ep[UDC_EP0OUT_IDX].ep.ep_list);
+
+	dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep;
+	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+}
+
+/**
+ * pch_udc_pcd_init() - This API initializes the driver structure
+ * @dev:	Reference to the driver structure
+ *
+ * Return codes:
+ *	0: Success
+ */
+static int pch_udc_pcd_init(struct pch_udc_dev *dev)
+{
+	pch_udc_init(dev);
+	pch_udc_pcd_reinit(dev);
+	return 0;
+}
+
+/**
+ * init_dma_pools() - create dma pools during initialization
+ * @pdev:	reference to struct pci_dev
+ */
+static int init_dma_pools(struct pch_udc_dev *dev)
+{
+	struct pch_udc_stp_dma_desc	*td_stp;
+	struct pch_udc_data_dma_desc	*td_data;
+
+	/* DMA setup */
+	dev->data_requests = pci_pool_create("data_requests", dev->pdev,
+		sizeof(struct pch_udc_data_dma_desc), 0, 0);
+	if (!dev->data_requests) {
+		dev_err(&dev->pdev->dev, "%s: can't get request data pool\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	/* dma desc for setup data */
+	dev->stp_requests = pci_pool_create("setup requests", dev->pdev,
+		sizeof(struct pch_udc_stp_dma_desc), 0, 0);
+	if (!dev->stp_requests) {
+		dev_err(&dev->pdev->dev, "%s: can't get setup request pool\n",
+			__func__);
+		return -ENOMEM;
+	}
+	/* setup */
+	td_stp = pci_pool_alloc(dev->stp_requests, GFP_KERNEL,
+				&dev->ep[UDC_EP0OUT_IDX].td_stp_phys);
+	if (!td_stp) {
+		dev_err(&dev->pdev->dev,
+			"%s: can't allocate setup dma descriptor\n", __func__);
+		return -ENOMEM;
+	}
+	dev->ep[UDC_EP0OUT_IDX].td_stp = td_stp;
+
+	/* data: 0 packets !? */
+	td_data = pci_pool_alloc(dev->data_requests, GFP_KERNEL,
+				&dev->ep[UDC_EP0OUT_IDX].td_data_phys);
+	if (!td_data) {
+		dev_err(&dev->pdev->dev,
+			"%s: can't allocate data dma descriptor\n", __func__);
+		return -ENOMEM;
+	}
+	dev->ep[UDC_EP0OUT_IDX].td_data = td_data;
+	dev->ep[UDC_EP0IN_IDX].td_stp = NULL;
+	dev->ep[UDC_EP0IN_IDX].td_stp_phys = 0;
+	dev->ep[UDC_EP0IN_IDX].td_data = NULL;
+	dev->ep[UDC_EP0IN_IDX].td_data_phys = 0;
+	return 0;
+}
+
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+	int (*bind)(struct usb_gadget *))
+{
+	struct pch_udc_dev	*dev = pch_udc;
+	int			retval;
+
+	if (!driver || (driver->speed == USB_SPEED_UNKNOWN) || !bind ||
+	    !driver->setup || !driver->unbind || !driver->disconnect) {
+		dev_err(&dev->pdev->dev,
+			"%s: invalid driver parameter\n", __func__);
+		return -EINVAL;
+	}
+
+	if (!dev)
+		return -ENODEV;
+
+	if (dev->driver) {
+		dev_err(&dev->pdev->dev, "%s: already bound\n", __func__);
+		return -EBUSY;
+	}
+	driver->driver.bus = NULL;
+	dev->driver = driver;
+	dev->gadget.dev.driver = &driver->driver;
+
+	/* Invoke the bind routine of the gadget driver */
+	retval = bind(&dev->gadget);
+
+	if (retval) {
+		dev_err(&dev->pdev->dev, "%s: binding to %s returning %d\n",
+		       __func__, driver->driver.name, retval);
+		dev->driver = NULL;
+		dev->gadget.dev.driver = NULL;
+		return retval;
+	}
+	/* get ready for ep0 traffic */
+	pch_udc_setup_ep0(dev);
+
+	/* clear SD */
+	pch_udc_clear_disconnect(dev);
+
+	dev->connected = 1;
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_probe_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct pch_udc_dev	*dev = pch_udc;
+
+	if (!dev)
+		return -ENODEV;
+
+	if (!driver || (driver != dev->driver)) {
+		dev_err(&dev->pdev->dev,
+			"%s: invalid driver parameter\n", __func__);
+		return -EINVAL;
+	}
+
+	pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
+
+	/* Assues that there are no pending requets with this driver */
+	driver->unbind(&dev->gadget);
+	dev->gadget.dev.driver = NULL;
+	dev->driver = NULL;
+	dev->connected = 0;
+
+	/* set SD */
+	pch_udc_set_disconnect(dev);
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+static void pch_udc_shutdown(struct pci_dev *pdev)
+{
+	struct pch_udc_dev *dev = pci_get_drvdata(pdev);
+
+	pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
+	pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+
+	/* disable the pullup so the host will think we're gone */
+	pch_udc_set_disconnect(dev);
+}
+
+static void pch_udc_remove(struct pci_dev *pdev)
+{
+	struct pch_udc_dev	*dev = pci_get_drvdata(pdev);
+
+	/* gadget driver must not be registered */
+	if (dev->driver)
+		dev_err(&pdev->dev,
+			"%s: gadget driver still bound!!!\n", __func__);
+	/* dma pool cleanup */
+	if (dev->data_requests)
+		pci_pool_destroy(dev->data_requests);
+
+	if (dev->stp_requests) {
+		/* cleanup DMA desc's for ep0in */
+		if (dev->ep[UDC_EP0OUT_IDX].td_stp) {
+			pci_pool_free(dev->stp_requests,
+				dev->ep[UDC_EP0OUT_IDX].td_stp,
+				dev->ep[UDC_EP0OUT_IDX].td_stp_phys);
+		}
+		if (dev->ep[UDC_EP0OUT_IDX].td_data) {
+			pci_pool_free(dev->stp_requests,
+				dev->ep[UDC_EP0OUT_IDX].td_data,
+				dev->ep[UDC_EP0OUT_IDX].td_data_phys);
+		}
+		pci_pool_destroy(dev->stp_requests);
+	}
+
+	pch_udc_exit(dev);
+
+	if (dev->irq_registered)
+		free_irq(pdev->irq, dev);
+	if (dev->base_addr)
+		iounmap(dev->base_addr);
+	if (dev->mem_region)
+		release_mem_region(dev->phys_addr,
+				   pci_resource_len(pdev, PCH_UDC_PCI_BAR));
+	if (dev->active)
+		pci_disable_device(pdev);
+	if (dev->registered)
+		device_unregister(&dev->gadget.dev);
+	kfree(dev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+static int pch_udc_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct pch_udc_dev *dev = pci_get_drvdata(pdev);
+
+	pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
+	pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+
+	pci_disable_device(pdev);
+	pci_enable_wake(pdev, PCI_D3hot, 0);
+
+	if (pci_save_state(pdev)) {
+		dev_err(&pdev->dev,
+			"%s: could not save PCI config state\n", __func__);
+		return -ENOMEM;
+	}
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+	return 0;
+}
+
+static int pch_udc_resume(struct pci_dev *pdev)
+{
+	int ret;
+
+	pci_set_power_state(pdev, PCI_D0);
+	ret = pci_restore_state(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: pci_restore_state failed\n", __func__);
+		return ret;
+	}
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: pci_enable_device failed\n", __func__);
+		return ret;
+	}
+	pci_enable_wake(pdev, PCI_D3hot, 0);
+	return 0;
+}
+#else
+#define pch_udc_suspend	NULL
+#define pch_udc_resume	NULL
+#endif /* CONFIG_PM */
+
+static int pch_udc_probe(struct pci_dev *pdev,
+			  const struct pci_device_id *id)
+{
+	unsigned long		resource;
+	unsigned long		len;
+	int			retval;
+	struct pch_udc_dev	*dev;
+
+	/* one udc only */
+	if (pch_udc) {
+		pr_err("%s: already probed\n", __func__);
+		return -EBUSY;
+	}
+	/* init */
+	dev = kzalloc(sizeof *dev, GFP_KERNEL);
+	if (!dev) {
+		pr_err("%s: no memory for device structure\n", __func__);
+		return -ENOMEM;
+	}
+	/* pci setup */
+	if (pci_enable_device(pdev) < 0) {
+		kfree(dev);
+		pr_err("%s: pci_enable_device failed\n", __func__);
+		return -ENODEV;
+	}
+	dev->active = 1;
+	pci_set_drvdata(pdev, dev);
+
+	/* PCI resource allocation */
+	resource = pci_resource_start(pdev, 1);
+	len = pci_resource_len(pdev, 1);
+
+	if (!request_mem_region(resource, len, KBUILD_MODNAME)) {
+		dev_err(&pdev->dev, "%s: pci device used already\n", __func__);
+		retval = -EBUSY;
+		goto finished;
+	}
+	dev->phys_addr = resource;
+	dev->mem_region = 1;
+
+	dev->base_addr = ioremap_nocache(resource, len);
+	if (!dev->base_addr) {
+		pr_err("%s: device memory cannot be mapped\n", __func__);
+		retval = -ENOMEM;
+		goto finished;
+	}
+	if (!pdev->irq) {
+		dev_err(&pdev->dev, "%s: irq not set\n", __func__);
+		retval = -ENODEV;
+		goto finished;
+	}
+	pch_udc = dev;
+	/* initialize the hardware */
+	if (pch_udc_pcd_init(dev))
+		goto finished;
+	if (request_irq(pdev->irq, pch_udc_isr, IRQF_SHARED, KBUILD_MODNAME,
+			dev)) {
+		dev_err(&pdev->dev, "%s: request_irq(%d) fail\n", __func__,
+			pdev->irq);
+		retval = -ENODEV;
+		goto finished;
+	}
+	dev->irq = pdev->irq;
+	dev->irq_registered = 1;
+
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
+	/* device struct setup */
+	spin_lock_init(&dev->lock);
+	dev->pdev = pdev;
+	dev->gadget.ops = &pch_udc_ops;
+
+	retval = init_dma_pools(dev);
+	if (retval)
+		goto finished;
+
+	dev_set_name(&dev->gadget.dev, "gadget");
+	dev->gadget.dev.parent = &pdev->dev;
+	dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
+	dev->gadget.dev.release = gadget_release;
+	dev->gadget.name = KBUILD_MODNAME;
+	dev->gadget.is_dualspeed = 1;
+
+	retval = device_register(&dev->gadget.dev);
+	if (retval)
+		goto finished;
+	dev->registered = 1;
+
+	/* Put the device in disconnected state till a driver is bound */
+	pch_udc_set_disconnect(dev);
+	return 0;
+
+finished:
+	pch_udc_remove(pdev);
+	return retval;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC),
+		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+		.class_mask = 0xffffffff,
+	},
+	{ 0 },
+};
+
+MODULE_DEVICE_TABLE(pci, pch_udc_pcidev_id);
+
+
+static struct pci_driver pch_udc_driver = {
+	.name =	KBUILD_MODNAME,
+	.id_table =	pch_udc_pcidev_id,
+	.probe =	pch_udc_probe,
+	.remove =	pch_udc_remove,
+	.suspend =	pch_udc_suspend,
+	.resume =	pch_udc_resume,
+	.shutdown =	pch_udc_shutdown,
+};
+
+static int __init pch_udc_pci_init(void)
+{
+	return pci_register_driver(&pch_udc_driver);
+}
+module_init(pch_udc_pci_init);
+
+static void __exit pch_udc_pci_exit(void)
+{
+	pci_unregister_driver(&pch_udc_driver);
+}
+module_exit(pch_udc_pci_exit);
+
+MODULE_DESCRIPTION("Intel EG20T USB Device Controller");
+MODULE_AUTHOR("OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/u_audio.c b/drivers/usb/gadget/u_audio.c
index 7a86d2c9109..59ffe1ecf1c 100644
--- a/drivers/usb/gadget/u_audio.c
+++ b/drivers/usb/gadget/u_audio.c
@@ -255,6 +255,7 @@ static int gaudio_open_snd_dev(struct gaudio *card)
 		ERROR(card, "No such PCM capture device: %s\n", fn_cap);
 		snd->substream = NULL;
 		snd->card = NULL;
+		snd->filp = NULL;
 	} else {
 		pcm_file = snd->filp->private_data;
 		snd->substream = pcm_file->substream;
@@ -273,17 +274,17 @@ static int gaudio_close_snd_dev(struct gaudio *gau)
 
 	/* Close control device */
 	snd = &gau->control;
-	if (!IS_ERR(snd->filp))
+	if (snd->filp)
 		filp_close(snd->filp, current->files);
 
 	/* Close PCM playback device and setup substream */
 	snd = &gau->playback;
-	if (!IS_ERR(snd->filp))
+	if (snd->filp)
 		filp_close(snd->filp, current->files);
 
 	/* Close PCM capture device and setup substream */
 	snd = &gau->capture;
-	if (!IS_ERR(snd->filp))
+	if (snd->filp)
 		filp_close(snd->filp, current->files);
 
 	return 0;
@@ -304,8 +305,7 @@ int __init gaudio_setup(struct gaudio *card)
 	ret = gaudio_open_snd_dev(card);
 	if (ret)
 		ERROR(card, "we need at least one control device\n");
-
-	if (!the_card)
+	else if (!the_card)
 		the_card = card;
 
 	return ret;
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index fbe86ca9580..1eda968b564 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -240,6 +240,9 @@ rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
 	size += out->maxpacket - 1;
 	size -= size % out->maxpacket;
 
+	if (dev->port_usb->is_fixed)
+		size = max(size, dev->port_usb->fixed_out_len);
+
 	skb = alloc_skb(size + NET_IP_ALIGN, gfp_flags);
 	if (skb == NULL) {
 		DBG(dev, "no rx skb\n");
@@ -578,12 +581,19 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
 	req->context = skb;
 	req->complete = tx_complete;
 
+	/* NCM requires no zlp if transfer is dwNtbInMaxSize */
+	if (dev->port_usb->is_fixed &&
+	    length == dev->port_usb->fixed_in_len &&
+	    (length % in->maxpacket) == 0)
+		req->zero = 0;
+	else
+		req->zero = 1;
+
 	/* use zlp framing on tx for strict CDC-Ether conformance,
 	 * though any robust network rx path ignores extra padding.
 	 * and some hardware doesn't like to write zlps.
 	 */
-	req->zero = 1;
-	if (!dev->zlp && (length % in->maxpacket) == 0)
+	if (req->zero && !dev->zlp && (length % in->maxpacket) == 0)
 		length++;
 
 	req->length = length;
@@ -829,11 +839,9 @@ void gether_cleanup(void)
 		return;
 
 	unregister_netdev(the_dev->net);
+	flush_work_sync(&the_dev->work);
 	free_netdev(the_dev->net);
 
-	/* assuming we used keventd, it must quiesce too */
-	flush_scheduled_work();
-
 	the_dev = NULL;
 }
 
diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h
index 3c8c0c9f9d7..b56e1e7d423 100644
--- a/drivers/usb/gadget/u_ether.h
+++ b/drivers/usb/gadget/u_ether.h
@@ -62,6 +62,10 @@ struct gether {
 
 	/* hooks for added framing, as needed for RNDIS and EEM. */
 	u32				header_len;
+	/* NCM requires fixed size bundles */
+	bool				is_fixed;
+	u32				fixed_out_len;
+	u32				fixed_in_len;
 	struct sk_buff			*(*wrap)(struct gether *port,
 						struct sk_buff *skb);
 	int				(*unwrap)(struct gether *port,
@@ -103,6 +107,7 @@ static inline bool can_support_ecm(struct usb_gadget *gadget)
 /* each configuration may bind one instance of an ethernet link */
 int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
 int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
+int ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
 int eem_bind_config(struct usb_configuration *c);
 
 #ifdef USB_ETH_RNDIS
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 6f4f8e6a40c..24046c0f587 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -133,6 +133,25 @@ config USB_EHCI_MXC
 	---help---
 	  Variation of ARC USB block used in some Freescale chips.
 
+config USB_EHCI_HCD_OMAP
+	bool "EHCI support for OMAP3 and later chips"
+	depends on USB_EHCI_HCD && ARCH_OMAP
+	default y
+	--- help ---
+	  Enables support for the on-chip EHCI controller on
+	  OMAP3 and later chips.
+
+config USB_EHCI_MSM
+	bool "Support for MSM on-chip EHCI USB controller"
+	depends on USB_EHCI_HCD && ARCH_MSM
+	select USB_EHCI_ROOT_HUB_TT
+	select USB_MSM_OTG_72K
+	---help---
+	  Enables support for the USB Host controller present on the
+	  Qualcomm chipsets. Root Hub has inbuilt TT.
+	  This driver depends on OTG driver for PHY initialization,
+	  clock management, powering up VBUS, and power management.
+
 config USB_EHCI_HCD_PPC_OF
 	bool "EHCI support for PPC USB controller on OF platform bus"
 	depends on USB_EHCI_HCD && PPC_OF
@@ -147,6 +166,14 @@ config USB_W90X900_EHCI
 	---help---
 		Enables support for the W90X900 USB controller
 
+config USB_CNS3XXX_EHCI
+	bool "Cavium CNS3XXX EHCI Module"
+	depends on USB_EHCI_HCD && ARCH_CNS3XXX
+	---help---
+	  Enable support for the CNS3XXX SOC's on-chip EHCI controller.
+	  It is needed for high-speed (480Mbit/sec) USB 2.0 device
+	  support.
+
 config USB_OXU210HP_HCD
 	tristate "OXU210HP HCD support"
 	depends on USB
@@ -286,6 +313,13 @@ config USB_OHCI_HCD_SSB
 
 	  If unsure, say N.
 
+config USB_CNS3XXX_OHCI
+	bool "Cavium CNS3XXX OHCI Module"
+	depends on USB_OHCI_HCD && ARCH_CNS3XXX
+	---help---
+	  Enable support for the CNS3XXX SOC's on-chip OHCI controller.
+	  It is needed for low-speed USB 1.0 device support.
+
 config USB_OHCI_BIG_ENDIAN_DESC
 	bool
 	depends on USB_OHCI_HCD
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 51bd0edf544..d6a69d514a8 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -99,6 +99,7 @@ static const struct hc_driver ehci_atmel_hc_driver = {
 	.urb_enqueue		= ehci_urb_enqueue,
 	.urb_dequeue		= ehci_urb_dequeue,
 	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
 
 	/* scheduling support */
 	.get_frame_number	= ehci_get_frame,
@@ -110,6 +111,8 @@ static const struct hc_driver ehci_atmel_hc_driver = {
 	.bus_resume		= ehci_bus_resume,
 	.relinquish_port	= ehci_relinquish_port,
 	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
 static int __init ehci_atmel_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-cns3xxx.c b/drivers/usb/host/ehci-cns3xxx.c
new file mode 100644
index 00000000000..708a05b5d25
--- /dev/null
+++ b/drivers/usb/host/ehci-cns3xxx.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/atomic.h>
+#include <mach/cns3xxx.h>
+#include <mach/pm.h>
+
+static int cns3xxx_ehci_init(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 *
+	 * Set USB AHB INCR length to 16
+	 */
+	if (atomic_inc_return(&usb_pwr_ref) == 1) {
+		cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
+		cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+		cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
+		__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
+			MISC_CHIP_CONFIG_REG);
+	}
+
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs
+		+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	hcd->has_tt = 0;
+	ehci_reset(ehci);
+
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	ehci_port_power(ehci, 0);
+
+	return retval;
+}
+
+static const struct hc_driver cns3xxx_ehci_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "CNS3XXX EHCI Host Controller",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+	.reset			= cns3xxx_ehci_init,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+	.get_frame_number	= ehci_get_frame,
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+#endif
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+static int cns3xxx_ehci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_hcd *hcd;
+	const struct hc_driver *driver = &cns3xxx_ehci_hc_driver;
+	struct resource *res;
+	int irq;
+	int retval;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(dev, "Found HC with no IRQ.\n");
+		return -ENODEV;
+	}
+	irq = res->start;
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "Found HC with no register addr.\n");
+		retval = -ENODEV;
+		goto err1;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+				driver->description)) {
+		dev_dbg(dev, "controller already in use\n");
+		retval = -EBUSY;
+		goto err1;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_dbg(dev, "error mapping memory\n");
+		retval = -EFAULT;
+		goto err2;
+	}
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval == 0)
+		return retval;
+
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+	usb_put_hcd(hcd);
+
+	return retval;
+}
+
+static int cns3xxx_ehci_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 */
+	if (atomic_dec_return(&usb_pwr_ref) == 0)
+		cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+
+	usb_put_hcd(hcd);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:cns3xxx-ehci");
+
+static struct platform_driver cns3xxx_ehci_driver = {
+	.probe = cns3xxx_ehci_probe,
+	.remove = cns3xxx_ehci_remove,
+	.driver = {
+		.name = "cns3xxx-ehci",
+	},
+};
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 6e2599661b5..3be238a24cc 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -879,7 +879,7 @@ static int fill_buffer(struct debug_buffer *buf)
 	int ret = 0;
 
 	if (!buf->output_buf)
-		buf->output_buf = (char *)vmalloc(buf->alloc_size);
+		buf->output_buf = vmalloc(buf->alloc_size);
 
 	if (!buf->output_buf) {
 		ret = -ENOMEM;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index e9062806d4a..6fee3cd58ef 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -114,6 +114,9 @@ MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us\n");
 
 #define	INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
 
+/* for ASPM quirk of ISOC on AMD SB800 */
+static struct pci_dev *amd_nb_dev;
+
 /*-------------------------------------------------------------------------*/
 
 #include "ehci.h"
@@ -529,6 +532,11 @@ static void ehci_stop (struct usb_hcd *hcd)
 	spin_unlock_irq (&ehci->lock);
 	ehci_mem_cleanup (ehci);
 
+	if (amd_nb_dev) {
+		pci_dev_put(amd_nb_dev);
+		amd_nb_dev = NULL;
+	}
+
 #ifdef	EHCI_STATS
 	ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
 		ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim,
@@ -1166,12 +1174,17 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_mxc_driver
 #endif
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7786
+#include "ehci-sh.c"
+#define PLATFORM_DRIVER		ehci_hcd_sh_driver
+#endif
+
 #ifdef CONFIG_SOC_AU1200
 #include "ehci-au1xxx.c"
 #define	PLATFORM_DRIVER		ehci_hcd_au1xxx_driver
 #endif
 
-#ifdef CONFIG_ARCH_OMAP3
+#ifdef CONFIG_USB_EHCI_HCD_OMAP
 #include "ehci-omap.c"
 #define        PLATFORM_DRIVER         ehci_hcd_omap_driver
 #endif
@@ -1216,6 +1229,26 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_octeon_driver
 #endif
 
+#ifdef CONFIG_USB_CNS3XXX_EHCI
+#include "ehci-cns3xxx.c"
+#define PLATFORM_DRIVER		cns3xxx_ehci_driver
+#endif
+
+#ifdef CONFIG_ARCH_VT8500
+#include "ehci-vt8500.c"
+#define	PLATFORM_DRIVER		vt8500_ehci_driver
+#endif
+
+#ifdef CONFIG_PLAT_SPEAR
+#include "ehci-spear.c"
+#define PLATFORM_DRIVER		spear_ehci_hcd_driver
+#endif
+
+#ifdef CONFIG_USB_EHCI_MSM
+#include "ehci-msm.c"
+#define PLATFORM_DRIVER		ehci_msm_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
     !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
new file mode 100644
index 00000000000..413f4deca53
--- /dev/null
+++ b/drivers/usb/host/ehci-msm.c
@@ -0,0 +1,345 @@
+/* ehci-msm.c - HSUSB Host Controller Driver Implementation
+ *
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * Partly derived from ehci-fsl.c and ehci-hcd.c
+ * Copyright (c) 2000-2004 by David Brownell
+ * Copyright (c) 2005 MontaVista Software
+ *
+ * All source code in this file is licensed under the following license except
+ * where indicated.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, you can find it at http://www.fsf.org
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/usb/otg.h>
+#include <linux/usb/msm_hsusb_hw.h>
+
+#define MSM_USB_BASE (hcd->regs)
+
+static struct otg_transceiver *otg;
+
+/*
+ * ehci_run defined in drivers/usb/host/ehci-hcd.c reset the controller and
+ * the configuration settings in ehci_msm_reset vanish after controller is
+ * reset. Resetting the controler in ehci_run seems to be un-necessary
+ * provided HCD reset the controller before calling ehci_run. Most of the HCD
+ * do but some are not. So this function is same as ehci_run but we don't
+ * reset the controller here.
+ */
+static int ehci_msm_run(struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	u32			temp;
+	u32			hcc_params;
+
+	hcd->uses_new_polling = 1;
+
+	ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
+	ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
+
+	/*
+	 * hcc_params controls whether ehci->regs->segment must (!!!)
+	 * be used; it constrains QH/ITD/SITD and QTD locations.
+	 * pci_pool consistent memory always uses segment zero.
+	 * streaming mappings for I/O buffers, like pci_map_single(),
+	 * can return segments above 4GB, if the device allows.
+	 *
+	 * NOTE:  the dma mask is visible through dma_supported(), so
+	 * drivers can pass this info along ... like NETIF_F_HIGHDMA,
+	 * Scsi_Host.highmem_io, and so forth.  It's readonly to all
+	 * host side drivers though.
+	 */
+	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
+	if (HCC_64BIT_ADDR(hcc_params))
+		ehci_writel(ehci, 0, &ehci->regs->segment);
+
+	/*
+	 * Philips, Intel, and maybe others need CMD_RUN before the
+	 * root hub will detect new devices (why?); NEC doesn't
+	 */
+	ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
+	ehci->command |= CMD_RUN;
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	dbg_cmd(ehci, "init", ehci->command);
+
+	/*
+	 * Start, enabling full USB 2.0 functionality ... usb 1.1 devices
+	 * are explicitly handed to companion controller(s), so no TT is
+	 * involved with the root hub.  (Except where one is integrated,
+	 * and there's no companion controller unless maybe for USB OTG.)
+	 *
+	 * Turning on the CF flag will transfer ownership of all ports
+	 * from the companions to the EHCI controller.  If any of the
+	 * companions are in the middle of a port reset at the time, it
+	 * could cause trouble.  Write-locking ehci_cf_port_reset_rwsem
+	 * guarantees that no resets are in progress.  After we set CF,
+	 * a short delay lets the hardware catch up; new resets shouldn't
+	 * be started before the port switching actions could complete.
+	 */
+	down_write(&ehci_cf_port_reset_rwsem);
+	hcd->state = HC_STATE_RUNNING;
+	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
+	usleep_range(5000, 5500);
+	up_write(&ehci_cf_port_reset_rwsem);
+	ehci->last_periodic_enable = ktime_get_real();
+
+	temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	ehci_info(ehci,
+		"USB %x.%x started, EHCI %x.%02x%s\n",
+		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
+		temp >> 8, temp & 0xff,
+		ignore_oc ? ", overcurrent ignored" : "");
+
+	ehci_writel(ehci, INTR_MASK,
+		    &ehci->regs->intr_enable); /* Turn On Interrupts */
+
+	/* GRR this is run-once init(), being done every time the HC starts.
+	 * So long as they're part of class devices, we can't do it init()
+	 * since the class device isn't created that early.
+	 */
+	create_debug_files(ehci);
+	create_companion_file(ehci);
+
+	return 0;
+}
+
+static int ehci_msm_reset(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+
+	ehci->caps = USB_CAPLENGTH;
+	ehci->regs = USB_CAPLENGTH +
+		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+
+	/* cache the data to minimize the chip reads*/
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	hcd->has_tt = 1;
+	ehci->sbrn = HCD_USB2;
+
+	/* data structure init */
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	retval = ehci_reset(ehci);
+	if (retval)
+		return retval;
+
+	/* bursts of unspecified length. */
+	writel(0, USB_AHBBURST);
+	/* Use the AHB transactor */
+	writel(0, USB_AHBMODE);
+	/* Disable streaming mode and select host mode */
+	writel(0x13, USB_USBMODE);
+
+	ehci_port_power(ehci, 1);
+	return 0;
+}
+
+static struct hc_driver msm_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "Qualcomm On-Chip EHCI Host Controller",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= ehci_irq,
+	.flags			= HCD_USB2 | HCD_MEMORY,
+
+	.reset			= ehci_msm_reset,
+	.start			= ehci_msm_run,
+
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	/*
+	 * PM support
+	 */
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+};
+
+static int ehci_msm_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct resource *res;
+	int ret;
+
+	dev_dbg(&pdev->dev, "ehci_msm proble\n");
+
+	hcd = usb_create_hcd(&msm_hc_driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		dev_err(&pdev->dev, "Unable to create HCD\n");
+		return  -ENOMEM;
+	}
+
+	hcd->irq = platform_get_irq(pdev, 0);
+	if (hcd->irq < 0) {
+		dev_err(&pdev->dev, "Unable to get IRQ resource\n");
+		ret = hcd->irq;
+		goto put_hcd;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Unable to get memory resource\n");
+		ret = -ENODEV;
+		goto put_hcd;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		ret = -ENOMEM;
+		goto put_hcd;
+	}
+
+	/*
+	 * OTG driver takes care of PHY initialization, clock management,
+	 * powering up VBUS, mapping of registers address space and power
+	 * management.
+	 */
+	otg = otg_get_transceiver();
+	if (!otg) {
+		dev_err(&pdev->dev, "unable to find transceiver\n");
+		ret = -ENODEV;
+		goto unmap;
+	}
+
+	ret = otg_set_host(otg, &hcd->self);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to register with transceiver\n");
+		goto put_transceiver;
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+	/*
+	 * OTG device parent of HCD takes care of putting
+	 * hardware into low power mode.
+	 */
+	pm_runtime_no_callbacks(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+
+put_transceiver:
+	otg_put_transceiver(otg);
+unmap:
+	iounmap(hcd->regs);
+put_hcd:
+	usb_put_hcd(hcd);
+
+	return ret;
+}
+
+static int __devexit ehci_msm_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	device_init_wakeup(&pdev->dev, 0);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+
+	otg_set_host(otg, NULL);
+	otg_put_transceiver(otg);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ehci_msm_pm_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	bool wakeup = device_may_wakeup(dev);
+
+	dev_dbg(dev, "ehci-msm PM suspend\n");
+
+	/*
+	 * EHCI helper function has also the same check before manipulating
+	 * port wakeup flags.  We do check here the same condition before
+	 * calling the same helper function to avoid bringing hardware
+	 * from Low power mode when there is no need for adjusting port
+	 * wakeup flags.
+	 */
+	if (hcd->self.root_hub->do_remote_wakeup && !wakeup) {
+		pm_runtime_resume(dev);
+		ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
+				wakeup);
+	}
+
+	return 0;
+}
+
+static int ehci_msm_pm_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "ehci-msm PM resume\n");
+	ehci_prepare_ports_for_controller_resume(hcd_to_ehci(hcd));
+
+	return 0;
+}
+#else
+#define ehci_msm_pm_suspend	NULL
+#define ehci_msm_pm_resume	NULL
+#endif
+
+static const struct dev_pm_ops ehci_msm_dev_pm_ops = {
+	.suspend         = ehci_msm_pm_suspend,
+	.resume          = ehci_msm_pm_resume,
+};
+
+static struct platform_driver ehci_msm_driver = {
+	.probe	= ehci_msm_probe,
+	.remove	= __devexit_p(ehci_msm_remove),
+	.driver = {
+		   .name = "msm_hsusb_host",
+		   .pm = &ehci_msm_dev_pm_ops,
+	},
+};
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index bce85055019..fa59b26fc5b 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -28,7 +28,7 @@
 #define ULPI_VIEWPORT_OFFSET	0x170
 
 struct ehci_mxc_priv {
-	struct clk *usbclk, *ahbclk;
+	struct clk *usbclk, *ahbclk, *phy1clk;
 	struct usb_hcd *hcd;
 };
 
@@ -36,14 +36,8 @@ struct ehci_mxc_priv {
 static int ehci_mxc_setup(struct usb_hcd *hcd)
 {
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-	struct device *dev = hcd->self.controller;
-	struct mxc_usbh_platform_data *pdata = dev_get_platdata(dev);
 	int retval;
 
-	/* EHCI registers start at offset 0x100 */
-	ehci->caps = hcd->regs + 0x100;
-	ehci->regs = hcd->regs + 0x100 +
-	    HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
 	dbg_hcs_params(ehci, "reset");
 	dbg_hcc_params(ehci, "reset");
 
@@ -65,12 +59,6 @@ static int ehci_mxc_setup(struct usb_hcd *hcd)
 
 	ehci_reset(ehci);
 
-	/* set up the PORTSCx register */
-	ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]);
-
-	/* is this really needed? */
-	msleep(10);
-
 	ehci_port_power(ehci, 0);
 	return 0;
 }
@@ -100,6 +88,7 @@ static const struct hc_driver ehci_mxc_hc_driver = {
 	.urb_enqueue = ehci_urb_enqueue,
 	.urb_dequeue = ehci_urb_dequeue,
 	.endpoint_disable = ehci_endpoint_disable,
+	.endpoint_reset = ehci_endpoint_reset,
 
 	/*
 	 * scheduling support
@@ -115,6 +104,8 @@ static const struct hc_driver ehci_mxc_hc_driver = {
 	.bus_resume = ehci_bus_resume,
 	.relinquish_port = ehci_relinquish_port,
 	.port_handed_over = ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 };
 
 static int ehci_mxc_drv_probe(struct platform_device *pdev)
@@ -125,6 +116,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 	int irq, ret;
 	struct ehci_mxc_priv *priv;
 	struct device *dev = &pdev->dev;
+	struct ehci_hcd *ehci;
 
 	dev_info(&pdev->dev, "initializing i.MX USB Controller\n");
 
@@ -168,17 +160,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 		goto err_ioremap;
 	}
 
-	/* call platform specific init function */
-	if (pdata->init) {
-		ret = pdata->init(pdev);
-		if (ret) {
-			dev_err(dev, "platform init failed\n");
-			goto err_init;
-		}
-		/* platforms need some time to settle changed IO settings */
-		mdelay(10);
-	}
-
 	/* enable clocks */
 	priv->usbclk = clk_get(dev, "usb");
 	if (IS_ERR(priv->usbclk)) {
@@ -196,11 +177,46 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 		clk_enable(priv->ahbclk);
 	}
 
+	/* "dr" device has its own clock */
+	if (pdev->id == 0) {
+		priv->phy1clk = clk_get(dev, "usb_phy1");
+		if (IS_ERR(priv->phy1clk)) {
+			ret = PTR_ERR(priv->phy1clk);
+			goto err_clk_phy;
+		}
+		clk_enable(priv->phy1clk);
+	}
+
+
+	/* call platform specific init function */
+	if (pdata->init) {
+		ret = pdata->init(pdev);
+		if (ret) {
+			dev_err(dev, "platform init failed\n");
+			goto err_init;
+		}
+		/* platforms need some time to settle changed IO settings */
+		mdelay(10);
+	}
+
 	/* setup specific usb hw */
 	ret = mxc_initialize_usb_hw(pdev->id, pdata->flags);
 	if (ret < 0)
 		goto err_init;
 
+	ehci = hcd_to_ehci(hcd);
+
+	/* EHCI registers start at offset 0x100 */
+	ehci->caps = hcd->regs + 0x100;
+	ehci->regs = hcd->regs + 0x100 +
+	    HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+
+	/* set up the PORTSCx register */
+	ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]);
+
+	/* is this really needed? */
+	msleep(10);
+
 	/* Initialize the transceiver */
 	if (pdata->otg) {
 		pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET;
@@ -230,6 +246,11 @@ err_add:
 	if (pdata && pdata->exit)
 		pdata->exit(pdev);
 err_init:
+	if (priv->phy1clk) {
+		clk_disable(priv->phy1clk);
+		clk_put(priv->phy1clk);
+	}
+err_clk_phy:
 	if (priv->ahbclk) {
 		clk_disable(priv->ahbclk);
 		clk_put(priv->ahbclk);
@@ -273,6 +294,10 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev)
 		clk_disable(priv->ahbclk);
 		clk_put(priv->ahbclk);
 	}
+	if (priv->phy1clk) {
+		clk_disable(priv->phy1clk);
+		clk_put(priv->phy1clk);
+	}
 
 	kfree(priv);
 
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 116ae280053..680f2ef4e59 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -1,11 +1,12 @@
 /*
- * ehci-omap.c - driver for USBHOST on OMAP 34xx processor
+ * ehci-omap.c - driver for USBHOST on OMAP3/4 processors
  *
- * Bus Glue for OMAP34xx USBHOST 3 port EHCI controller
- * Tested on OMAP3430 ES2.0 SDP
+ * Bus Glue for the EHCI controllers in OMAP3/4
+ * Tested on several OMAP3 boards, and OMAP4 Pandaboard
  *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
  *	Author: Vikram Pandita <vikram.pandita@ti.com>
+ *	Author: Anand Gadiyar <gadiyar@ti.com>
  *
  * Copyright (C) 2009 Nokia Corporation
  *	Contact: Felipe Balbi <felipe.balbi@nokia.com>
@@ -26,11 +27,14 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  *
- * TODO (last updated Feb 12, 2010):
+ * TODO (last updated Nov 21, 2010):
  *	- add kernel-doc
  *	- enable AUTOIDLE
  *	- add suspend/resume
  *	- move workarounds to board-files
+ *	- factor out code common to OHCI
+ *	- add HSIC and TLL support
+ *	- convert to use hwmod and runtime PM
  */
 
 #include <linux/platform_device.h>
@@ -86,9 +90,9 @@
 #define	OMAP_TLL_ULPI_SCRATCH_REGISTER(num)		(0x816 + 0x100 * num)
 
 #define OMAP_TLL_CHANNEL_COUNT				3
-#define OMAP_TLL_CHANNEL_1_EN_MASK			(1 << 1)
-#define OMAP_TLL_CHANNEL_2_EN_MASK			(1 << 2)
-#define OMAP_TLL_CHANNEL_3_EN_MASK			(1 << 4)
+#define OMAP_TLL_CHANNEL_1_EN_MASK			(1 << 0)
+#define OMAP_TLL_CHANNEL_2_EN_MASK			(1 << 1)
+#define OMAP_TLL_CHANNEL_3_EN_MASK			(1 << 2)
 
 /* UHH Register Set */
 #define	OMAP_UHH_REVISION				(0x00)
@@ -114,6 +118,23 @@
 #define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9)
 #define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10)
 
+/* OMAP4-specific defines */
+#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR		(3 << 2)
+#define OMAP4_UHH_SYSCONFIG_NOIDLE			(1 << 2)
+
+#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR		(3 << 4)
+#define OMAP4_UHH_SYSCONFIG_NOSTDBY			(1 << 4)
+#define OMAP4_UHH_SYSCONFIG_SOFTRESET			(1 << 0)
+
+#define OMAP4_P1_MODE_CLEAR				(3 << 16)
+#define OMAP4_P1_MODE_TLL				(1 << 16)
+#define OMAP4_P1_MODE_HSIC				(3 << 16)
+#define OMAP4_P2_MODE_CLEAR				(3 << 18)
+#define OMAP4_P2_MODE_TLL				(1 << 18)
+#define OMAP4_P2_MODE_HSIC				(3 << 18)
+
+#define OMAP_REV2_TLL_CHANNEL_COUNT			2
+
 #define	OMAP_UHH_DEBUG_CSR				(0x44)
 
 /* EHCI Register Set */
@@ -127,6 +148,17 @@
 #define	EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT		8
 #define	EHCI_INSNREG05_ULPI_WRDATA_SHIFT		0
 
+/* Values of UHH_REVISION - Note: these are not given in the TRM */
+#define OMAP_EHCI_REV1	0x00000010	/* OMAP3 */
+#define OMAP_EHCI_REV2	0x50700100	/* OMAP4 */
+
+#define is_omap_ehci_rev1(x)	(x->omap_ehci_rev == OMAP_EHCI_REV1)
+#define is_omap_ehci_rev2(x)	(x->omap_ehci_rev == OMAP_EHCI_REV2)
+
+#define is_ehci_phy_mode(x)	(x == EHCI_HCD_OMAP_MODE_PHY)
+#define is_ehci_tll_mode(x)	(x == EHCI_HCD_OMAP_MODE_TLL)
+#define is_ehci_hsic_mode(x)	(x == EHCI_HCD_OMAP_MODE_HSIC)
+
 /*-------------------------------------------------------------------------*/
 
 static inline void ehci_omap_writel(void __iomem *base, u32 reg, u32 val)
@@ -156,10 +188,14 @@ struct ehci_hcd_omap {
 	struct device		*dev;
 
 	struct clk		*usbhost_ick;
-	struct clk		*usbhost2_120m_fck;
-	struct clk		*usbhost1_48m_fck;
+	struct clk		*usbhost_hs_fck;
+	struct clk		*usbhost_fs_fck;
 	struct clk		*usbtll_fck;
 	struct clk		*usbtll_ick;
+	struct clk		*xclk60mhsp1_ck;
+	struct clk		*xclk60mhsp2_ck;
+	struct clk		*utmi_p1_fck;
+	struct clk		*utmi_p2_fck;
 
 	/* FIXME the following two workarounds are
 	 * board specific not silicon-specific so these
@@ -176,6 +212,9 @@ struct ehci_hcd_omap {
 	/* phy reset workaround */
 	int			phy_reset;
 
+	/* IP revision */
+	u32			omap_ehci_rev;
+
 	/* desired phy_mode: TLL, PHY */
 	enum ehci_hcd_omap_mode	port_mode[OMAP3_HS_USB_PORTS];
 
@@ -191,13 +230,14 @@ struct ehci_hcd_omap {
 
 /*-------------------------------------------------------------------------*/
 
-static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
+static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask,
+				u8 tll_channel_count)
 {
 	unsigned reg;
 	int i;
 
 	/* Program the 3 TLL channels upfront */
-	for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
+	for (i = 0; i < tll_channel_count; i++) {
 		reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
 
 		/* Disable AutoIdle, BitStuffing and use SDR Mode */
@@ -217,7 +257,7 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
 	ehci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
 
 	/* Enable channels now */
-	for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
+	for (i = 0; i < tll_channel_count; i++) {
 		reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
 
 		/* Enable only the reg that is needed */
@@ -286,19 +326,19 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	}
 	clk_enable(omap->usbhost_ick);
 
-	omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck");
-	if (IS_ERR(omap->usbhost2_120m_fck)) {
-		ret = PTR_ERR(omap->usbhost2_120m_fck);
+	omap->usbhost_hs_fck = clk_get(omap->dev, "hs_fck");
+	if (IS_ERR(omap->usbhost_hs_fck)) {
+		ret = PTR_ERR(omap->usbhost_hs_fck);
 		goto err_host_120m_fck;
 	}
-	clk_enable(omap->usbhost2_120m_fck);
+	clk_enable(omap->usbhost_hs_fck);
 
-	omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck");
-	if (IS_ERR(omap->usbhost1_48m_fck)) {
-		ret = PTR_ERR(omap->usbhost1_48m_fck);
+	omap->usbhost_fs_fck = clk_get(omap->dev, "fs_fck");
+	if (IS_ERR(omap->usbhost_fs_fck)) {
+		ret = PTR_ERR(omap->usbhost_fs_fck);
 		goto err_host_48m_fck;
 	}
-	clk_enable(omap->usbhost1_48m_fck);
+	clk_enable(omap->usbhost_fs_fck);
 
 	if (omap->phy_reset) {
 		/* Refer: ISSUE1 */
@@ -333,6 +373,80 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	}
 	clk_enable(omap->usbtll_ick);
 
+	omap->omap_ehci_rev = ehci_omap_readl(omap->uhh_base,
+						OMAP_UHH_REVISION);
+	dev_dbg(omap->dev, "OMAP UHH_REVISION 0x%x\n",
+					omap->omap_ehci_rev);
+
+	/*
+	 * Enable per-port clocks as needed (newer controllers only).
+	 * - External ULPI clock for PHY mode
+	 * - Internal clocks for TLL and HSIC modes (TODO)
+	 */
+	if (is_omap_ehci_rev2(omap)) {
+		switch (omap->port_mode[0]) {
+		case EHCI_HCD_OMAP_MODE_PHY:
+			omap->xclk60mhsp1_ck = clk_get(omap->dev,
+							"xclk60mhsp1_ck");
+			if (IS_ERR(omap->xclk60mhsp1_ck)) {
+				ret = PTR_ERR(omap->xclk60mhsp1_ck);
+				dev_err(omap->dev,
+					"Unable to get Port1 ULPI clock\n");
+			}
+
+			omap->utmi_p1_fck = clk_get(omap->dev,
+							"utmi_p1_gfclk");
+			if (IS_ERR(omap->utmi_p1_fck)) {
+				ret = PTR_ERR(omap->utmi_p1_fck);
+				dev_err(omap->dev,
+					"Unable to get utmi_p1_fck\n");
+			}
+
+			ret = clk_set_parent(omap->utmi_p1_fck,
+						omap->xclk60mhsp1_ck);
+			if (ret != 0) {
+				dev_err(omap->dev,
+					"Unable to set P1 f-clock\n");
+			}
+			break;
+		case EHCI_HCD_OMAP_MODE_TLL:
+			/* TODO */
+		default:
+			break;
+		}
+		switch (omap->port_mode[1]) {
+		case EHCI_HCD_OMAP_MODE_PHY:
+			omap->xclk60mhsp2_ck = clk_get(omap->dev,
+							"xclk60mhsp2_ck");
+			if (IS_ERR(omap->xclk60mhsp2_ck)) {
+				ret = PTR_ERR(omap->xclk60mhsp2_ck);
+				dev_err(omap->dev,
+					"Unable to get Port2 ULPI clock\n");
+			}
+
+			omap->utmi_p2_fck = clk_get(omap->dev,
+							"utmi_p2_gfclk");
+			if (IS_ERR(omap->utmi_p2_fck)) {
+				ret = PTR_ERR(omap->utmi_p2_fck);
+				dev_err(omap->dev,
+					"Unable to get utmi_p2_fck\n");
+			}
+
+			ret = clk_set_parent(omap->utmi_p2_fck,
+						omap->xclk60mhsp2_ck);
+			if (ret != 0) {
+				dev_err(omap->dev,
+					"Unable to set P2 f-clock\n");
+			}
+			break;
+		case EHCI_HCD_OMAP_MODE_TLL:
+			/* TODO */
+		default:
+			break;
+		}
+	}
+
+
 	/* perform TLL soft reset, and wait until reset is complete */
 	ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
 			OMAP_USBTLL_SYSCONFIG_SOFTRESET);
@@ -360,12 +474,20 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 
 	/* Put UHH in NoIdle/NoStandby mode */
 	reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG);
-	reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
-			| OMAP_UHH_SYSCONFIG_SIDLEMODE
-			| OMAP_UHH_SYSCONFIG_CACTIVITY
-			| OMAP_UHH_SYSCONFIG_MIDLEMODE);
-	reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
+	if (is_omap_ehci_rev1(omap)) {
+		reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
+				| OMAP_UHH_SYSCONFIG_SIDLEMODE
+				| OMAP_UHH_SYSCONFIG_CACTIVITY
+				| OMAP_UHH_SYSCONFIG_MIDLEMODE);
+		reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
+
 
+	} else if (is_omap_ehci_rev2(omap)) {
+		reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
+		reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
+		reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
+		reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
+	}
 	ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
 
 	reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
@@ -376,40 +498,56 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 			| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
 	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
 
-	if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
-		reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
-	if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
-		reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
-	if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
-		reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
-
-	/* Bypass the TLL module for PHY mode operation */
-	if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
-		dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n");
-		if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) ||
-			(omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) ||
-				(omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY))
-			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
-		else
-			reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
-	} else {
-		dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
-		if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY)
-			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
-		else if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL)
-			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
-
-		if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY)
-			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
-		else if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL)
-			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
-
-		if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)
-			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
-		else if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)
-			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+	if (is_omap_ehci_rev1(omap)) {
+		if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+			reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
+		if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+			reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
+		if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+			reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
+
+		/* Bypass the TLL module for PHY mode operation */
+		if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
+			dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n");
+			if (is_ehci_phy_mode(omap->port_mode[0]) ||
+				is_ehci_phy_mode(omap->port_mode[1]) ||
+					is_ehci_phy_mode(omap->port_mode[2]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+			else
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+		} else {
+			dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
+			if (is_ehci_phy_mode(omap->port_mode[0]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+			else if (is_ehci_tll_mode(omap->port_mode[0]))
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+
+			if (is_ehci_phy_mode(omap->port_mode[1]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+			else if (is_ehci_tll_mode(omap->port_mode[1]))
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+
+			if (is_ehci_phy_mode(omap->port_mode[2]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+			else if (is_ehci_tll_mode(omap->port_mode[2]))
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+		}
+	} else if (is_omap_ehci_rev2(omap)) {
+		/* Clear port mode fields for PHY mode*/
+		reg &= ~OMAP4_P1_MODE_CLEAR;
+		reg &= ~OMAP4_P2_MODE_CLEAR;
+
+		if (is_ehci_tll_mode(omap->port_mode[0]))
+			reg |= OMAP4_P1_MODE_TLL;
+		else if (is_ehci_hsic_mode(omap->port_mode[0]))
+			reg |= OMAP4_P1_MODE_HSIC;
 
+		if (is_ehci_tll_mode(omap->port_mode[1]))
+			reg |= OMAP4_P2_MODE_TLL;
+		else if (is_ehci_hsic_mode(omap->port_mode[1]))
+			reg |= OMAP4_P2_MODE_HSIC;
 	}
+
 	ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
 	dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
 
@@ -438,7 +576,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 			tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK;
 
 		/* Enable UTMI mode for required TLL channels */
-		omap_usb_utmi_init(omap, tll_ch_mask);
+		omap_usb_utmi_init(omap, tll_ch_mask, OMAP_TLL_CHANNEL_COUNT);
 	}
 
 	if (omap->phy_reset) {
@@ -464,6 +602,14 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	return 0;
 
 err_sys_status:
+	clk_disable(omap->utmi_p2_fck);
+	clk_put(omap->utmi_p2_fck);
+	clk_disable(omap->xclk60mhsp2_ck);
+	clk_put(omap->xclk60mhsp2_ck);
+	clk_disable(omap->utmi_p1_fck);
+	clk_put(omap->utmi_p1_fck);
+	clk_disable(omap->xclk60mhsp1_ck);
+	clk_put(omap->xclk60mhsp1_ck);
 	clk_disable(omap->usbtll_ick);
 	clk_put(omap->usbtll_ick);
 
@@ -472,8 +618,8 @@ err_tll_ick:
 	clk_put(omap->usbtll_fck);
 
 err_tll_fck:
-	clk_disable(omap->usbhost1_48m_fck);
-	clk_put(omap->usbhost1_48m_fck);
+	clk_disable(omap->usbhost_fs_fck);
+	clk_put(omap->usbhost_fs_fck);
 
 	if (omap->phy_reset) {
 		if (gpio_is_valid(omap->reset_gpio_port[0]))
@@ -484,8 +630,8 @@ err_tll_fck:
 	}
 
 err_host_48m_fck:
-	clk_disable(omap->usbhost2_120m_fck);
-	clk_put(omap->usbhost2_120m_fck);
+	clk_disable(omap->usbhost_hs_fck);
+	clk_put(omap->usbhost_hs_fck);
 
 err_host_120m_fck:
 	clk_disable(omap->usbhost_ick);
@@ -503,6 +649,8 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 
 	/* Reset OMAP modules for insmod/rmmod to work */
 	ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG,
+			is_omap_ehci_rev2(omap) ?
+			OMAP4_UHH_SYSCONFIG_SOFTRESET :
 			OMAP_UHH_SYSCONFIG_SOFTRESET);
 	while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
 				& (1 << 0))) {
@@ -550,16 +698,16 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 		omap->usbhost_ick = NULL;
 	}
 
-	if (omap->usbhost1_48m_fck != NULL) {
-		clk_disable(omap->usbhost1_48m_fck);
-		clk_put(omap->usbhost1_48m_fck);
-		omap->usbhost1_48m_fck = NULL;
+	if (omap->usbhost_fs_fck != NULL) {
+		clk_disable(omap->usbhost_fs_fck);
+		clk_put(omap->usbhost_fs_fck);
+		omap->usbhost_fs_fck = NULL;
 	}
 
-	if (omap->usbhost2_120m_fck != NULL) {
-		clk_disable(omap->usbhost2_120m_fck);
-		clk_put(omap->usbhost2_120m_fck);
-		omap->usbhost2_120m_fck = NULL;
+	if (omap->usbhost_hs_fck != NULL) {
+		clk_disable(omap->usbhost_hs_fck);
+		clk_put(omap->usbhost_hs_fck);
+		omap->usbhost_hs_fck = NULL;
 	}
 
 	if (omap->usbtll_ick != NULL) {
@@ -568,6 +716,32 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 		omap->usbtll_ick = NULL;
 	}
 
+	if (is_omap_ehci_rev2(omap)) {
+		if (omap->xclk60mhsp1_ck != NULL) {
+			clk_disable(omap->xclk60mhsp1_ck);
+			clk_put(omap->xclk60mhsp1_ck);
+			omap->xclk60mhsp1_ck = NULL;
+		}
+
+		if (omap->utmi_p1_fck != NULL) {
+			clk_disable(omap->utmi_p1_fck);
+			clk_put(omap->utmi_p1_fck);
+			omap->utmi_p1_fck = NULL;
+		}
+
+		if (omap->xclk60mhsp2_ck != NULL) {
+			clk_disable(omap->xclk60mhsp2_ck);
+			clk_put(omap->xclk60mhsp2_ck);
+			omap->xclk60mhsp2_ck = NULL;
+		}
+
+		if (omap->utmi_p2_fck != NULL) {
+			clk_disable(omap->utmi_p2_fck);
+			clk_put(omap->utmi_p2_fck);
+			omap->utmi_p2_fck = NULL;
+		}
+	}
+
 	if (omap->phy_reset) {
 		if (gpio_is_valid(omap->reset_gpio_port[0]))
 			gpio_free(omap->reset_gpio_port[0]);
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 01bb72b7183..76179c39c0e 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -22,6 +22,9 @@
 #error "This file is PCI bus glue.  CONFIG_PCI must be defined."
 #endif
 
+/* defined here to avoid adding to pci_ids.h for single instance use */
+#define PCI_DEVICE_ID_INTEL_CE4100_USB	0x2e70
+
 /*-------------------------------------------------------------------------*/
 
 /* called after powerup, by probe or system-pm "wakeup" */
@@ -41,6 +44,35 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
 	return 0;
 }
 
+static int ehci_quirk_amd_SB800(struct ehci_hcd *ehci)
+{
+	struct pci_dev *amd_smbus_dev;
+	u8 rev = 0;
+
+	amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
+	if (!amd_smbus_dev)
+		return 0;
+
+	pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+	if (rev < 0x40) {
+		pci_dev_put(amd_smbus_dev);
+		amd_smbus_dev = NULL;
+		return 0;
+	}
+
+	if (!amd_nb_dev)
+		amd_nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
+	if (!amd_nb_dev)
+		ehci_err(ehci, "QUIRK: unable to get AMD NB device\n");
+
+	ehci_info(ehci, "QUIRK: Enable AMD SB800 L1 fix\n");
+
+	pci_dev_put(amd_smbus_dev);
+	amd_smbus_dev = NULL;
+
+	return 1;
+}
+
 /* called during probe() after chip reset completes */
 static int ehci_pci_setup(struct usb_hcd *hcd)
 {
@@ -99,6 +131,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 	/* cache this readonly data; minimize chip reads */
 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
 
+	if (ehci_quirk_amd_SB800(ehci))
+		ehci->amd_l1_fix = 1;
+
 	retval = ehci_halt(ehci);
 	if (retval)
 		return retval;
@@ -137,6 +172,10 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			ehci_info(ehci, "disable lpm for langwell/penwell\n");
 			ehci->has_lpm = 0;
 		}
+		if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB) {
+			hcd->has_tt = 1;
+			tdi_reset(ehci);
+		}
 		break;
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
@@ -161,6 +200,18 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			if (pdev->revision < 0xa4)
 				ehci->no_selective_suspend = 1;
 			break;
+
+		/* MCP89 chips on the MacBookAir3,1 give EPROTO when
+		 * fetching device descriptors unless LPM is disabled.
+		 * There are also intermittent problems enumerating
+		 * devices with PPCD enabled.
+		 */
+		case 0x0d9d:
+			ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89");
+			ehci->has_lpm = 0;
+			ehci->has_ppcd = 0;
+			ehci->command &= ~CMD_PPCEE;
+			break;
 		}
 		break;
 	case PCI_VENDOR_ID_VIA:
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index d9f78eb2657..aa46f57f9ec 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1590,6 +1590,63 @@ itd_link (struct ehci_hcd *ehci, unsigned frame, struct ehci_itd *itd)
 	*hw_p = cpu_to_hc32(ehci, itd->itd_dma | Q_TYPE_ITD);
 }
 
+#define AB_REG_BAR_LOW 0xe0
+#define AB_REG_BAR_HIGH 0xe1
+#define AB_INDX(addr) ((addr) + 0x00)
+#define AB_DATA(addr) ((addr) + 0x04)
+#define NB_PCIE_INDX_ADDR 0xe0
+#define NB_PCIE_INDX_DATA 0xe4
+#define NB_PIF0_PWRDOWN_0 0x01100012
+#define NB_PIF0_PWRDOWN_1 0x01100013
+
+static void ehci_quirk_amd_L1(struct ehci_hcd *ehci, int disable)
+{
+	u32 addr, addr_low, addr_high, val;
+
+	outb_p(AB_REG_BAR_LOW, 0xcd6);
+	addr_low = inb_p(0xcd7);
+	outb_p(AB_REG_BAR_HIGH, 0xcd6);
+	addr_high = inb_p(0xcd7);
+	addr = addr_high << 8 | addr_low;
+	outl_p(0x30, AB_INDX(addr));
+	outl_p(0x40, AB_DATA(addr));
+	outl_p(0x34, AB_INDX(addr));
+	val = inl_p(AB_DATA(addr));
+
+	if (disable) {
+		val &= ~0x8;
+		val |= (1 << 4) | (1 << 9);
+	} else {
+		val |= 0x8;
+		val &= ~((1 << 4) | (1 << 9));
+	}
+	outl_p(val, AB_DATA(addr));
+
+	if (amd_nb_dev) {
+		addr = NB_PIF0_PWRDOWN_0;
+		pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_ADDR, addr);
+		pci_read_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, &val);
+		if (disable)
+			val &= ~(0x3f << 7);
+		else
+			val |= 0x3f << 7;
+
+		pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, val);
+
+		addr = NB_PIF0_PWRDOWN_1;
+		pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_ADDR, addr);
+		pci_read_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, &val);
+		if (disable)
+			val &= ~(0x3f << 7);
+		else
+			val |= 0x3f << 7;
+
+		pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, val);
+	}
+
+	return;
+}
+
 /* fit urb's itds into the selected schedule slot; activate as needed */
 static int
 itd_link_urb (
@@ -1616,6 +1673,12 @@ itd_link_urb (
 			urb->interval,
 			next_uframe >> 3, next_uframe & 0x7);
 	}
+
+	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+		if (ehci->amd_l1_fix == 1)
+			ehci_quirk_amd_L1(ehci, 1);
+	}
+
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
 
 	/* fill iTDs uframe by uframe */
@@ -1740,6 +1803,11 @@ itd_complete (
 	(void) disable_periodic(ehci);
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
 
+	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+		if (ehci->amd_l1_fix == 1)
+			ehci_quirk_amd_L1(ehci, 0);
+	}
+
 	if (unlikely(list_is_singular(&stream->td_list))) {
 		ehci_to_hcd(ehci)->self.bandwidth_allocated
 				-= stream->bandwidth;
@@ -2025,6 +2093,12 @@ sitd_link_urb (
 			(next_uframe >> 3) & (ehci->periodic_size - 1),
 			stream->interval, hc32_to_cpu(ehci, stream->splits));
 	}
+
+	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+		if (ehci->amd_l1_fix == 1)
+			ehci_quirk_amd_L1(ehci, 1);
+	}
+
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
 
 	/* fill sITDs frame by frame */
@@ -2125,6 +2199,11 @@ sitd_complete (
 	(void) disable_periodic(ehci);
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
 
+	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+		if (ehci->amd_l1_fix == 1)
+			ehci_quirk_amd_L1(ehci, 0);
+	}
+
 	if (list_is_singular(&stream->td_list)) {
 		ehci_to_hcd(ehci)->self.bandwidth_allocated
 				-= stream->bandwidth;
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
new file mode 100644
index 00000000000..595f70f42b5
--- /dev/null
+++ b/drivers/usb/host/ehci-sh.c
@@ -0,0 +1,243 @@
+/*
+ * SuperH EHCI host controller driver
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * Based on ohci-sh.c and ehci-atmel.c.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+struct ehci_sh_priv {
+	struct clk *iclk, *fclk;
+	struct usb_hcd *hcd;
+};
+
+static int ehci_sh_reset(struct usb_hcd *hcd)
+{
+	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
+	int ret;
+
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci,
+		&ehci->caps->hc_capbase));
+
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	ret = ehci_halt(ehci);
+	if (unlikely(ret))
+		return ret;
+
+	ret = ehci_init(hcd);
+	if (unlikely(ret))
+		return ret;
+
+	ehci->sbrn = 0x20;
+
+	ehci_reset(ehci);
+	ehci_port_power(ehci, 0);
+
+	return ret;
+}
+
+static const struct hc_driver ehci_sh_hc_driver = {
+	.description			= hcd_name,
+	.product_desc			= "SuperH EHCI",
+	.hcd_priv_size			= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq				= ehci_irq,
+	.flags				= HCD_USB2 | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset				= ehci_sh_reset,
+	.start				= ehci_run,
+	.stop				= ehci_stop,
+	.shutdown			= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue			= ehci_urb_enqueue,
+	.urb_dequeue			= ehci_urb_dequeue,
+	.endpoint_disable		= ehci_endpoint_disable,
+	.endpoint_reset			= ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number		= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data		= ehci_hub_status_data,
+	.hub_control			= ehci_hub_control,
+
+#ifdef CONFIG_PM
+	.bus_suspend			= ehci_bus_suspend,
+	.bus_resume			= ehci_bus_resume,
+#endif
+
+	.relinquish_port		= ehci_relinquish_port,
+	.port_handed_over		= ehci_port_handed_over,
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_hcd_sh_probe(struct platform_device *pdev)
+{
+	const struct hc_driver *driver = &ehci_sh_hc_driver;
+	struct resource *res;
+	struct ehci_sh_priv *priv;
+	struct usb_hcd *hcd;
+	int irq, ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Found HC with no register addr. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		ret = -ENODEV;
+		goto fail_create_hcd;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(&pdev->dev,
+			"Found HC with no IRQ. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		ret = -ENODEV;
+		goto fail_create_hcd;
+	}
+
+	/* initialize hcd */
+	hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev,
+			     dev_name(&pdev->dev));
+	if (!hcd) {
+		ret = -ENOMEM;
+		goto fail_create_hcd;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+				driver->description)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		ret = -EBUSY;
+		goto fail_request_resource;
+	}
+
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		ret = -ENXIO;
+		goto fail_ioremap;
+	}
+
+	priv = kmalloc(sizeof(struct ehci_sh_priv), GFP_KERNEL);
+	if (!priv) {
+		dev_dbg(&pdev->dev, "error allocating priv data\n");
+		ret = -ENOMEM;
+		goto fail_alloc;
+	}
+
+	/* These are optional, we don't care if they fail */
+	priv->fclk = clk_get(&pdev->dev, "usb_fck");
+	if (IS_ERR(priv->fclk))
+		priv->fclk = NULL;
+
+	priv->iclk = clk_get(&pdev->dev, "usb_ick");
+	if (IS_ERR(priv->iclk))
+		priv->iclk = NULL;
+
+	clk_enable(priv->fclk);
+	clk_enable(priv->iclk);
+
+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to add hcd");
+		goto fail_add_hcd;
+	}
+
+	priv->hcd = hcd;
+	platform_set_drvdata(pdev, priv);
+
+	return ret;
+
+fail_add_hcd:
+	clk_disable(priv->iclk);
+	clk_disable(priv->fclk);
+
+	clk_put(priv->iclk);
+	clk_put(priv->fclk);
+
+	kfree(priv);
+fail_alloc:
+	iounmap(hcd->regs);
+fail_ioremap:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+fail_request_resource:
+	usb_put_hcd(hcd);
+fail_create_hcd:
+	dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), ret);
+
+	return ret;
+}
+
+static int __exit ehci_hcd_sh_remove(struct platform_device *pdev)
+{
+	struct ehci_sh_priv *priv = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = priv->hcd;
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	platform_set_drvdata(pdev, NULL);
+
+	clk_disable(priv->fclk);
+	clk_disable(priv->iclk);
+
+	clk_put(priv->fclk);
+	clk_put(priv->iclk);
+
+	kfree(priv);
+
+	return 0;
+}
+
+static void ehci_hcd_sh_shutdown(struct platform_device *pdev)
+{
+	struct ehci_sh_priv *priv = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = priv->hcd;
+
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
+}
+
+static struct platform_driver ehci_hcd_sh_driver = {
+	.probe		= ehci_hcd_sh_probe,
+	.remove		= __exit_p(ehci_hcd_sh_remove),
+	.shutdown	= ehci_hcd_sh_shutdown,
+	.driver		= {
+		.name	= "sh_ehci",
+		.owner	= THIS_MODULE,
+	},
+};
+
+MODULE_ALIAS("platform:sh_ehci");
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
new file mode 100644
index 00000000000..75c00873443
--- /dev/null
+++ b/drivers/usb/host/ehci-spear.c
@@ -0,0 +1,212 @@
+/*
+* Driver for EHCI HCD on SPEAR SOC
+*
+* Copyright (C) 2010 ST Micro Electronics,
+* Deepak Sikri <deepak.sikri@st.com>
+*
+* Based on various ehci-*.c drivers
+*
+* This file is subject to the terms and conditions of the GNU General Public
+* License. See the file COPYING in the main directory of this archive for
+* more details.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+struct spear_ehci {
+	struct ehci_hcd ehci;
+	struct clk *clk;
+};
+
+#define to_spear_ehci(hcd)	(struct spear_ehci *)hcd_to_ehci(hcd)
+
+static void spear_start_ehci(struct spear_ehci *ehci)
+{
+	clk_enable(ehci->clk);
+}
+
+static void spear_stop_ehci(struct spear_ehci *ehci)
+{
+	clk_disable(ehci->clk);
+}
+
+static int ehci_spear_setup(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval = 0;
+
+	/* registers start at offset 0x0 */
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci,
+				&ehci->caps->hc_capbase));
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	ehci_reset(ehci);
+	ehci_port_power(ehci, 0);
+
+	return retval;
+}
+
+static const struct hc_driver ehci_spear_hc_driver = {
+	.description			= hcd_name,
+	.product_desc			= "SPEAr EHCI",
+	.hcd_priv_size			= sizeof(struct spear_ehci),
+
+	/* generic hardware linkage */
+	.irq				= ehci_irq,
+	.flags				= HCD_MEMORY | HCD_USB2,
+
+	/* basic lifecycle operations */
+	.reset				= ehci_spear_setup,
+	.start				= ehci_run,
+	.stop				= ehci_stop,
+	.shutdown			= ehci_shutdown,
+
+	/* managing i/o requests and associated device resources */
+	.urb_enqueue			= ehci_urb_enqueue,
+	.urb_dequeue			= ehci_urb_dequeue,
+	.endpoint_disable		= ehci_endpoint_disable,
+	.endpoint_reset			= ehci_endpoint_reset,
+
+	/* scheduling support */
+	.get_frame_number		= ehci_get_frame,
+
+	/* root hub support */
+	.hub_status_data		= ehci_hub_status_data,
+	.hub_control			= ehci_hub_control,
+	.bus_suspend			= ehci_bus_suspend,
+	.bus_resume			= ehci_bus_resume,
+	.relinquish_port		= ehci_relinquish_port,
+	.port_handed_over		= ehci_port_handed_over,
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd ;
+	struct spear_ehci *ehci;
+	struct resource *res;
+	struct clk *usbh_clk;
+	const struct hc_driver *driver = &ehci_spear_hc_driver;
+	int *pdata = pdev->dev.platform_data;
+	int irq, retval;
+	char clk_name[20] = "usbh_clk";
+
+	if (pdata == NULL)
+		return -EFAULT;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		retval = irq;
+		goto fail_irq_get;
+	}
+
+	if (*pdata >= 0)
+		sprintf(clk_name, "usbh.%01d_clk", *pdata);
+
+	usbh_clk = clk_get(NULL, clk_name);
+	if (IS_ERR(usbh_clk)) {
+		dev_err(&pdev->dev, "Error getting interface clock\n");
+		retval = PTR_ERR(usbh_clk);
+		goto fail_get_usbh_clk;
+	}
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto fail_create_hcd;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		retval = -ENODEV;
+		goto fail_request_resource;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+				driver->description)) {
+		retval = -EBUSY;
+		goto fail_request_resource;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		retval = -ENOMEM;
+		goto fail_ioremap;
+	}
+
+	ehci = (struct spear_ehci *)hcd_to_ehci(hcd);
+	ehci->clk = usbh_clk;
+
+	spear_start_ehci(ehci);
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
+	if (retval)
+		goto fail_add_hcd;
+
+	return retval;
+
+fail_add_hcd:
+	spear_stop_ehci(ehci);
+	iounmap(hcd->regs);
+fail_ioremap:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+fail_request_resource:
+	usb_put_hcd(hcd);
+fail_create_hcd:
+	clk_put(usbh_clk);
+fail_get_usbh_clk:
+fail_irq_get:
+	dev_err(&pdev->dev, "init fail, %d\n", retval);
+
+	return retval ;
+}
+
+static int spear_ehci_hcd_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct spear_ehci *ehci_p = to_spear_ehci(hcd);
+
+	if (!hcd)
+		return 0;
+	if (in_interrupt())
+		BUG();
+	usb_remove_hcd(hcd);
+
+	if (ehci_p->clk)
+		spear_stop_ehci(ehci_p);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+
+	if (ehci_p->clk)
+		clk_put(ehci_p->clk);
+
+	return 0;
+}
+
+static struct platform_driver spear_ehci_hcd_driver = {
+	.probe		= spear_ehci_hcd_drv_probe,
+	.remove		= spear_ehci_hcd_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name = "spear-ehci",
+		.bus = &platform_bus_type
+	}
+};
+
+MODULE_ALIAS("platform:spear-ehci");
diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c
new file mode 100644
index 00000000000..20168062035
--- /dev/null
+++ b/drivers/usb/host/ehci-vt8500.c
@@ -0,0 +1,172 @@
+/*
+ * drivers/usb/host/ehci-vt8500.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * Based on ehci-au1xxx.c
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+
+static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int rc = 0;
+
+	if (!udev->parent) /* udev is root hub itself, impossible */
+		rc = -1;
+	/* we only support lpm device connected to root hub yet */
+	if (ehci->has_lpm && !udev->parent->parent) {
+		rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum);
+		if (!rc)
+			rc = ehci_lpm_check(ehci, udev->portnum);
+	}
+	return rc;
+}
+
+static const struct hc_driver vt8500_ehci_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "VT8500 EHCI",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset			= ehci_init,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	/*
+	 * call back when device connected and addressed
+	 */
+	.update_device =	ehci_update_device,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+static int vt8500_ehci_drv_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct ehci_hcd *ehci;
+	struct resource *res;
+	int ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
+		pr_debug("resource[1] is not IORESOURCE_IRQ");
+		return -ENOMEM;
+	}
+	hcd = usb_create_hcd(&vt8500_ehci_hc_driver, &pdev->dev, "VT8500");
+	if (!hcd)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		pr_debug("request_mem_region failed");
+		ret = -EBUSY;
+		goto err1;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		pr_debug("ioremap failed");
+		ret = -ENOMEM;
+		goto err2;
+	}
+
+	ehci = hcd_to_ehci(hcd);
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
+
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = readl(&ehci->caps->hcs_params);
+
+	ehci_port_power(ehci, 1);
+
+	ret = usb_add_hcd(hcd, pdev->resource[1].start,
+			  IRQF_DISABLED | IRQF_SHARED);
+	if (ret == 0) {
+		platform_set_drvdata(pdev, hcd);
+		return ret;
+	}
+
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+	usb_put_hcd(hcd);
+	return ret;
+}
+
+static int vt8500_ehci_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver vt8500_ehci_driver = {
+	.probe		= vt8500_ehci_drv_probe,
+	.remove		= vt8500_ehci_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver = {
+		.name	= "vt8500-ehci",
+		.owner	= THIS_MODULE,
+	}
+};
+
+MODULE_ALIAS("platform:vt8500-ehci");
diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c
index cfa21ea20f8..6bc35809a5c 100644
--- a/drivers/usb/host/ehci-w90x900.c
+++ b/drivers/usb/host/ehci-w90x900.c
@@ -130,6 +130,7 @@ static const struct hc_driver ehci_w90x900_hc_driver = {
 	.urb_enqueue = ehci_urb_enqueue,
 	.urb_dequeue = ehci_urb_dequeue,
 	.endpoint_disable = ehci_endpoint_disable,
+	.endpoint_reset = ehci_endpoint_reset,
 
 	/*
 	 * scheduling support
@@ -147,6 +148,8 @@ static const struct hc_driver ehci_w90x900_hc_driver = {
 #endif
 	.relinquish_port	= ehci_relinquish_port,
 	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 };
 
 static int __devinit ehci_w90x900_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index 6c8076ad821..e8f4f36fdf0 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -117,6 +117,7 @@ static const struct hc_driver ehci_xilinx_of_hc_driver = {
 	.urb_enqueue		= ehci_urb_enqueue,
 	.urb_dequeue		= ehci_urb_dequeue,
 	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
 
 	/*
 	 * scheduling support
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index ba8eab366b8..799ac16a54b 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -131,6 +131,7 @@ struct ehci_hcd {			/* one per controller */
 	unsigned		has_amcc_usb23:1;
 	unsigned		need_io_watchdog:1;
 	unsigned		broken_periodic:1;
+	unsigned		amd_l1_fix:1;
 	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
 	unsigned		use_dummy_qh:1;	/* AMD Frame List table quirk*/
 
diff --git a/drivers/usb/host/ohci-cns3xxx.c b/drivers/usb/host/ohci-cns3xxx.c
new file mode 100644
index 00000000000..f05ef87e934
--- /dev/null
+++ b/drivers/usb/host/ohci-cns3xxx.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/atomic.h>
+#include <mach/cns3xxx.h>
+#include <mach/pm.h>
+
+static int __devinit
+cns3xxx_ohci_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	int ret;
+
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 *
+	 * Set USB AHB INCR length to 16
+	 */
+	if (atomic_inc_return(&usb_pwr_ref) == 1) {
+		cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
+		cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+		cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
+		__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
+			MISC_CHIP_CONFIG_REG);
+	}
+
+	ret = ohci_init(ohci);
+	if (ret < 0)
+		return ret;
+
+	ohci->num_ports = 1;
+
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		err("can't start %s", hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+	return 0;
+}
+
+static const struct hc_driver cns3xxx_ohci_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "CNS3XXX OHCI Host controller",
+	.hcd_priv_size		= sizeof(struct ohci_hcd),
+	.irq			= ohci_irq,
+	.flags			= HCD_USB11 | HCD_MEMORY,
+	.start			= cns3xxx_ohci_start,
+	.stop			= ohci_stop,
+	.shutdown		= ohci_shutdown,
+	.urb_enqueue		= ohci_urb_enqueue,
+	.urb_dequeue		= ohci_urb_dequeue,
+	.endpoint_disable	= ohci_endpoint_disable,
+	.get_frame_number	= ohci_get_frame,
+	.hub_status_data	= ohci_hub_status_data,
+	.hub_control		= ohci_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend		= ohci_bus_suspend,
+	.bus_resume		= ohci_bus_resume,
+#endif
+	.start_port_reset	= ohci_start_port_reset,
+};
+
+static int cns3xxx_ohci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_hcd *hcd;
+	const struct hc_driver *driver = &cns3xxx_ohci_hc_driver;
+	struct resource *res;
+	int irq;
+	int retval;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(dev, "Found HC with no IRQ.\n");
+		return -ENODEV;
+	}
+	irq = res->start;
+
+	hcd = usb_create_hcd(driver, dev, dev_name(dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "Found HC with no register addr.\n");
+		retval = -ENODEV;
+		goto err1;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+			driver->description)) {
+		dev_dbg(dev, "controller already in use\n");
+		retval = -EBUSY;
+		goto err1;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_dbg(dev, "error mapping memory\n");
+		retval = -EFAULT;
+		goto err2;
+	}
+
+	ohci_hcd_init(hcd_to_ohci(hcd));
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval == 0)
+		return retval;
+
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+	usb_put_hcd(hcd);
+	return retval;
+}
+
+static int cns3xxx_ohci_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 */
+	if (atomic_dec_return(&usb_pwr_ref) == 0)
+		cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+
+	usb_put_hcd(hcd);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:cns3xxx-ohci");
+
+static struct platform_driver ohci_hcd_cns3xxx_driver = {
+	.probe = cns3xxx_ohci_probe,
+	.remove = cns3xxx_ohci_remove,
+	.driver = {
+		.name = "cns3xxx-ohci",
+	},
+};
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 5179acb7aa2..759a12ff804 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -901,7 +901,8 @@ static void ohci_stop (struct usb_hcd *hcd)
 
 	ohci_dump (ohci, 1);
 
-	flush_scheduled_work();
+	if (quirk_nec(ohci))
+		flush_work_sync(&ohci->nec_work);
 
 	ohci_usb_reset (ohci);
 	ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
@@ -1081,6 +1082,11 @@ MODULE_LICENSE ("GPL");
 #define OF_PLATFORM_DRIVER	ohci_hcd_ppc_of_driver
 #endif
 
+#ifdef CONFIG_PLAT_SPEAR
+#include "ohci-spear.c"
+#define PLATFORM_DRIVER		spear_ohci_hcd_driver
+#endif
+
 #ifdef CONFIG_PPC_PS3
 #include "ohci-ps3.c"
 #define PS3_SYSTEM_BUS_DRIVER	ps3_ohci_driver
@@ -1111,6 +1117,11 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ohci_octeon_driver
 #endif
 
+#ifdef CONFIG_USB_CNS3XXX_OHCI
+#include "ohci-cns3xxx.c"
+#define PLATFORM_DRIVER		ohci_hcd_cns3xxx_driver
+#endif
+
 #if	!defined(PCI_DRIVER) &&		\
 	!defined(PLATFORM_DRIVER) &&	\
 	!defined(OMAP1_PLATFORM_DRIVER) &&	\
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 2cc8a504b18..a37d5993e4e 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -648,7 +648,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
 
 	ret = omap3_start_ohci(omap, hcd);
 	if (ret) {
-		dev_dbg(&pdev->dev, "failed to start ehci\n");
+		dev_dbg(&pdev->dev, "failed to start ohci\n");
 		goto err_start;
 	}
 
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index 0b35d22cc70..f47867ff78c 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -109,7 +109,7 @@ static int ohci_hcd_sh_probe(struct platform_device *pdev)
 	hcd->regs = (void __iomem *)res->start;
 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
 	if (ret != 0) {
 		err("Failed to add hcd");
 		usb_put_hcd(hcd);
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
new file mode 100644
index 00000000000..4fd4bea9ac7
--- /dev/null
+++ b/drivers/usb/host/ohci-spear.c
@@ -0,0 +1,240 @@
+/*
+* OHCI HCD (Host Controller Driver) for USB.
+*
+* Copyright (C) 2010 ST Microelectronics.
+* Deepak Sikri<deepak.sikri@st.com>
+*
+* Based on various ohci-*.c drivers
+*
+* This file is licensed under the terms of the GNU General Public
+* License version 2. This program is licensed "as is" without any
+* warranty of any kind, whether express or implied.
+*/
+
+#include <linux/signal.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+struct spear_ohci {
+	struct ohci_hcd ohci;
+	struct clk *clk;
+};
+
+#define to_spear_ohci(hcd)	(struct spear_ohci *)hcd_to_ohci(hcd)
+
+static void spear_start_ohci(struct spear_ohci *ohci)
+{
+	clk_enable(ohci->clk);
+}
+
+static void spear_stop_ohci(struct spear_ohci *ohci)
+{
+	clk_disable(ohci->clk);
+}
+
+static int __devinit ohci_spear_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	int ret;
+
+	ret = ohci_init(ohci);
+	if (ret < 0)
+		return ret;
+	ohci->regs = hcd->regs;
+
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		dev_err(hcd->self.controller, "can't start\n");
+		ohci_stop(hcd);
+		return ret;
+	}
+
+	create_debug_files(ohci);
+
+#ifdef DEBUG
+	ohci_dump(ohci, 1);
+#endif
+	return 0;
+}
+
+static const struct hc_driver ohci_spear_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "SPEAr OHCI",
+	.hcd_priv_size		= sizeof(struct spear_ohci),
+
+	/* generic hardware linkage */
+	.irq			= ohci_irq,
+	.flags			= HCD_USB11 | HCD_MEMORY,
+
+	/* basic lifecycle operations */
+	.start			= ohci_spear_start,
+	.stop			= ohci_stop,
+	.shutdown		= ohci_shutdown,
+#ifdef	CONFIG_PM
+	.bus_suspend		= ohci_bus_suspend,
+	.bus_resume		= ohci_bus_resume,
+#endif
+
+	/* managing i/o requests and associated device resources */
+	.urb_enqueue		= ohci_urb_enqueue,
+	.urb_dequeue		= ohci_urb_dequeue,
+	.endpoint_disable	= ohci_endpoint_disable,
+
+	/* scheduling support */
+	.get_frame_number	= ohci_get_frame,
+
+	/* root hub support */
+	.hub_status_data	= ohci_hub_status_data,
+	.hub_control		= ohci_hub_control,
+
+	.start_port_reset	= ohci_start_port_reset,
+};
+
+static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
+{
+	const struct hc_driver *driver = &ohci_spear_hc_driver;
+	struct usb_hcd *hcd = NULL;
+	struct clk *usbh_clk;
+	struct spear_ohci *ohci_p;
+	struct resource *res;
+	int retval, irq;
+	int *pdata = pdev->dev.platform_data;
+	char clk_name[20] = "usbh_clk";
+
+	if (pdata == NULL)
+		return -EFAULT;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		retval = irq;
+		goto fail_irq_get;
+	}
+
+	if (*pdata >= 0)
+		sprintf(clk_name, "usbh.%01d_clk", *pdata);
+
+	usbh_clk = clk_get(NULL, clk_name);
+	if (IS_ERR(usbh_clk)) {
+		dev_err(&pdev->dev, "Error getting interface clock\n");
+		retval = PTR_ERR(usbh_clk);
+		goto fail_get_usbh_clk;
+	}
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto fail_create_hcd;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		retval = -ENODEV;
+		goto fail_request_resource;
+	}
+
+	hcd->rsrc_start = pdev->resource[0].start;
+	hcd->rsrc_len = resource_size(res);
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		dev_dbg(&pdev->dev, "request_mem_region failed\n");
+		retval = -EBUSY;
+		goto fail_request_resource;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_dbg(&pdev->dev, "ioremap failed\n");
+		retval = -ENOMEM;
+		goto fail_ioremap;
+	}
+
+	ohci_p = (struct spear_ohci *)hcd_to_ohci(hcd);
+	ohci_p->clk = usbh_clk;
+	spear_start_ohci(ohci_p);
+	ohci_hcd_init(hcd_to_ohci(hcd));
+
+	retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), IRQF_DISABLED);
+	if (retval == 0)
+		return retval;
+
+	spear_stop_ohci(ohci_p);
+	iounmap(hcd->regs);
+fail_ioremap:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+fail_request_resource:
+	usb_put_hcd(hcd);
+fail_create_hcd:
+	clk_put(usbh_clk);
+fail_get_usbh_clk:
+fail_irq_get:
+	dev_err(&pdev->dev, "init fail, %d\n", retval);
+
+	return retval;
+}
+
+static int spear_ohci_hcd_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct spear_ohci *ohci_p = to_spear_ohci(hcd);
+
+	usb_remove_hcd(hcd);
+	if (ohci_p->clk)
+		spear_stop_ohci(ohci_p);
+
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+
+	if (ohci_p->clk)
+		clk_put(ohci_p->clk);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+#if defined(CONFIG_PM)
+static int spear_ohci_hcd_drv_suspend(struct platform_device *dev,
+		pm_message_t message)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	struct spear_ohci *ohci_p = to_spear_ohci(hcd);
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	spear_stop_ohci(ohci_p);
+	ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
+	return 0;
+}
+
+static int spear_ohci_hcd_drv_resume(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	struct spear_ohci *ohci_p = to_spear_ohci(hcd);
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	spear_start_ohci(ohci_p);
+	ohci_finish_controller_resume(hcd);
+	return 0;
+}
+#endif
+
+/* Driver definition to register with the platform bus */
+static struct platform_driver spear_ohci_hcd_driver = {
+	.probe =	spear_ohci_hcd_drv_probe,
+	.remove =	spear_ohci_hcd_drv_remove,
+#ifdef CONFIG_PM
+	.suspend =	spear_ohci_hcd_drv_suspend,
+	.resume =	spear_ohci_hcd_drv_resume,
+#endif
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "spear-ohci",
+	},
+};
+
+MODULE_ALIAS("platform:spear-ohci");
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index f52d04db28f..cee867829ec 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -569,7 +569,7 @@ static int uhci_init(struct usb_hcd *hcd)
  */
 static void uhci_shutdown(struct pci_dev *pdev)
 {
-	struct usb_hcd *hcd = (struct usb_hcd *) pci_get_drvdata(pdev);
+	struct usb_hcd *hcd = pci_get_drvdata(pdev);
 
 	uhci_hc_died(hcd_to_uhci(hcd));
 }
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 2090b45eb60..af77abb5c68 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -29,7 +29,7 @@ static void uhci_set_next_interrupt(struct uhci_hcd *uhci)
 {
 	if (uhci->is_stopped)
 		mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
-	uhci->term_td->status |= cpu_to_le32(TD_CTRL_IOC); 
+	uhci->term_td->status |= cpu_to_le32(TD_CTRL_IOC);
 }
 
 static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci)
@@ -195,7 +195,9 @@ static inline void uhci_remove_td_from_frame_list(struct uhci_hcd *uhci,
 		} else {
 			struct uhci_td *ntd;
 
-			ntd = list_entry(td->fl_list.next, struct uhci_td, fl_list);
+			ntd = list_entry(td->fl_list.next,
+					 struct uhci_td,
+					 fl_list);
 			uhci->frame[td->frame] = LINK_TO_TD(ntd);
 			uhci->frame_cpu[td->frame] = ntd;
 		}
@@ -728,7 +730,7 @@ static inline struct urb_priv *uhci_alloc_urb_priv(struct uhci_hcd *uhci,
 
 	urbp->urb = urb;
 	urb->hcpriv = urbp;
-	
+
 	INIT_LIST_HEAD(&urbp->node);
 	INIT_LIST_HEAD(&urbp->td_list);
 
@@ -846,7 +848,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
 
 		/* Alternate Data0/1 (start with Data1) */
 		destination ^= TD_TOKEN_TOGGLE;
-	
+
 		uhci_add_td_to_urbp(td, urbp);
 		uhci_fill_td(td, status, destination | uhci_explen(pktsze),
 				data);
@@ -857,7 +859,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
 	}
 
 	/*
-	 * Build the final TD for control status 
+	 * Build the final TD for control status
 	 */
 	td = uhci_alloc_td(uhci);
 	if (!td)
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index 72b6892fda6..9546f6cd01f 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -356,7 +356,7 @@ static void __exit whci_hc_driver_exit(void)
 module_exit(whci_hc_driver_exit);
 
 /* PCI device ID's that we handle (so it gets loaded) */
-static struct pci_device_id whci_hcd_id_table[] = {
+static struct pci_device_id __used whci_hcd_id_table[] = {
 	{ PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
 	{ /* empty last entry */ }
 };
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index fef5a1f9d48..5d963e35049 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -229,6 +229,13 @@ void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
 static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex,
 		u32 __iomem *addr, u32 port_status)
 {
+	/* Don't allow the USB core to disable SuperSpeed ports. */
+	if (xhci->port_array[wIndex] == 0x03) {
+		xhci_dbg(xhci, "Ignoring request to disable "
+				"SuperSpeed port.\n");
+		return;
+	}
+
 	/* Write 1 to disable the port */
 	xhci_writel(xhci, port_status | PORT_PE, addr);
 	port_status = xhci_readl(xhci, addr);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index d178761c398..1d0f45f0e7a 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1443,6 +1443,13 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->dcbaa = NULL;
 
 	scratchpad_free(xhci);
+
+	xhci->num_usb2_ports = 0;
+	xhci->num_usb3_ports = 0;
+	kfree(xhci->usb2_ports);
+	kfree(xhci->usb3_ports);
+	kfree(xhci->port_array);
+
 	xhci->page_size = 0;
 	xhci->page_shift = 0;
 	xhci->bus_suspended = 0;
@@ -1627,6 +1634,166 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
 			&xhci->ir_set->erst_dequeue);
 }
 
+static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
+		u32 __iomem *addr, u8 major_revision)
+{
+	u32 temp, port_offset, port_count;
+	int i;
+
+	if (major_revision > 0x03) {
+		xhci_warn(xhci, "Ignoring unknown port speed, "
+				"Ext Cap %p, revision = 0x%x\n",
+				addr, major_revision);
+		/* Ignoring port protocol we can't understand. FIXME */
+		return;
+	}
+
+	/* Port offset and count in the third dword, see section 7.2 */
+	temp = xhci_readl(xhci, addr + 2);
+	port_offset = XHCI_EXT_PORT_OFF(temp);
+	port_count = XHCI_EXT_PORT_COUNT(temp);
+	xhci_dbg(xhci, "Ext Cap %p, port offset = %u, "
+			"count = %u, revision = 0x%x\n",
+			addr, port_offset, port_count, major_revision);
+	/* Port count includes the current port offset */
+	if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
+		/* WTF? "Valid values are ‘1’ to MaxPorts" */
+		return;
+	port_offset--;
+	for (i = port_offset; i < (port_offset + port_count); i++) {
+		/* Duplicate entry.  Ignore the port if the revisions differ. */
+		if (xhci->port_array[i] != 0) {
+			xhci_warn(xhci, "Duplicate port entry, Ext Cap %p,"
+					" port %u\n", addr, i);
+			xhci_warn(xhci, "Port was marked as USB %u, "
+					"duplicated as USB %u\n",
+					xhci->port_array[i], major_revision);
+			/* Only adjust the roothub port counts if we haven't
+			 * found a similar duplicate.
+			 */
+			if (xhci->port_array[i] != major_revision &&
+				xhci->port_array[i] != (u8) -1) {
+				if (xhci->port_array[i] == 0x03)
+					xhci->num_usb3_ports--;
+				else
+					xhci->num_usb2_ports--;
+				xhci->port_array[i] = (u8) -1;
+			}
+			/* FIXME: Should we disable the port? */
+			continue;
+		}
+		xhci->port_array[i] = major_revision;
+		if (major_revision == 0x03)
+			xhci->num_usb3_ports++;
+		else
+			xhci->num_usb2_ports++;
+	}
+	/* FIXME: Should we disable ports not in the Extended Capabilities? */
+}
+
+/*
+ * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
+ * specify what speeds each port is supposed to be.  We can't count on the port
+ * speed bits in the PORTSC register being correct until a device is connected,
+ * but we need to set up the two fake roothubs with the correct number of USB
+ * 3.0 and USB 2.0 ports at host controller initialization time.
+ */
+static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
+{
+	u32 __iomem *addr;
+	u32 offset;
+	unsigned int num_ports;
+	int i, port_index;
+
+	addr = &xhci->cap_regs->hcc_params;
+	offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
+	if (offset == 0) {
+		xhci_err(xhci, "No Extended Capability registers, "
+				"unable to set up roothub.\n");
+		return -ENODEV;
+	}
+
+	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+	xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags);
+	if (!xhci->port_array)
+		return -ENOMEM;
+
+	/*
+	 * For whatever reason, the first capability offset is from the
+	 * capability register base, not from the HCCPARAMS register.
+	 * See section 5.3.6 for offset calculation.
+	 */
+	addr = &xhci->cap_regs->hc_capbase + offset;
+	while (1) {
+		u32 cap_id;
+
+		cap_id = xhci_readl(xhci, addr);
+		if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
+			xhci_add_in_port(xhci, num_ports, addr,
+					(u8) XHCI_EXT_PORT_MAJOR(cap_id));
+		offset = XHCI_EXT_CAPS_NEXT(cap_id);
+		if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports)
+				== num_ports)
+			break;
+		/*
+		 * Once you're into the Extended Capabilities, the offset is
+		 * always relative to the register holding the offset.
+		 */
+		addr += offset;
+	}
+
+	if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) {
+		xhci_warn(xhci, "No ports on the roothubs?\n");
+		return -ENODEV;
+	}
+	xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n",
+			xhci->num_usb2_ports, xhci->num_usb3_ports);
+	/*
+	 * Note we could have all USB 3.0 ports, or all USB 2.0 ports.
+	 * Not sure how the USB core will handle a hub with no ports...
+	 */
+	if (xhci->num_usb2_ports) {
+		xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)*
+				xhci->num_usb2_ports, flags);
+		if (!xhci->usb2_ports)
+			return -ENOMEM;
+
+		port_index = 0;
+		for (i = 0; i < num_ports; i++) {
+			if (xhci->port_array[i] == 0x03 ||
+					xhci->port_array[i] == 0 ||
+					xhci->port_array[i] == -1)
+				continue;
+
+			xhci->usb2_ports[port_index] =
+				&xhci->op_regs->port_status_base +
+				NUM_PORT_REGS*i;
+			xhci_dbg(xhci, "USB 2.0 port at index %u, "
+					"addr = %p\n", i,
+					xhci->usb2_ports[port_index]);
+			port_index++;
+		}
+	}
+	if (xhci->num_usb3_ports) {
+		xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
+				xhci->num_usb3_ports, flags);
+		if (!xhci->usb3_ports)
+			return -ENOMEM;
+
+		port_index = 0;
+		for (i = 0; i < num_ports; i++)
+			if (xhci->port_array[i] == 0x03) {
+				xhci->usb3_ports[port_index] =
+					&xhci->op_regs->port_status_base +
+					NUM_PORT_REGS*i;
+				xhci_dbg(xhci, "USB 3.0 port at index %u, "
+						"addr = %p\n", i,
+						xhci->usb3_ports[port_index]);
+				port_index++;
+			}
+	}
+	return 0;
+}
 
 int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 {
@@ -1809,6 +1976,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 	if (scratchpad_alloc(xhci, flags))
 		goto fail;
+	if (xhci_setup_port_arrays(xhci, flags))
+		goto fail;
 
 	return 0;
 
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 06fca0835b5..45e4a3108cc 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1549,6 +1549,15 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 		cmd_completion = command->completion;
 		cmd_status = &command->status;
 		command->command_trb = xhci->cmd_ring->enqueue;
+
+		/* Enqueue pointer can be left pointing to the link TRB,
+		 * we must handle that
+		 */
+		if ((command->command_trb->link.control & TRB_TYPE_BITMASK)
+				== TRB_TYPE(TRB_LINK))
+			command->command_trb =
+				xhci->cmd_ring->enq_seg->next->trbs;
+
 		list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
 	} else {
 		in_ctx = virt_dev->in_ctx;
@@ -2272,6 +2281,15 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 	/* Attempt to submit the Reset Device command to the command ring */
 	spin_lock_irqsave(&xhci->lock, flags);
 	reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
+
+	/* Enqueue pointer can be left pointing to the link TRB,
+	 * we must handle that
+	 */
+	if ((reset_device_cmd->command_trb->link.control & TRB_TYPE_BITMASK)
+			== TRB_TYPE(TRB_LINK))
+		reset_device_cmd->command_trb =
+			xhci->cmd_ring->enq_seg->next->trbs;
+
 	list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
 	ret = xhci_queue_reset_device(xhci, slot_id);
 	if (ret) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 85e65647d44..170c367112d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -454,6 +454,24 @@ struct xhci_doorbell_array {
 
 
 /**
+ * struct xhci_protocol_caps
+ * @revision:		major revision, minor revision, capability ID,
+ *			and next capability pointer.
+ * @name_string:	Four ASCII characters to say which spec this xHC
+ *			follows, typically "USB ".
+ * @port_info:		Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+	u32	revision;
+	u32	name_string;
+	u32	port_info;
+};
+
+#define	XHCI_EXT_PORT_MAJOR(x)	(((x) >> 24) & 0xff)
+#define	XHCI_EXT_PORT_OFF(x)	((x) & 0xff)
+#define	XHCI_EXT_PORT_COUNT(x)	(((x) >> 8) & 0xff)
+
+/**
  * struct xhci_container_ctx
  * @type: Type of context.  Used to calculated offsets to contained contexts.
  * @size: Size of the context data
@@ -1240,6 +1258,14 @@ struct xhci_hcd {
 	u32			suspended_ports[8];	/* which ports are
 							   suspended */
 	unsigned long		resume_done[MAX_HC_PORTS];
+	/* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
+	u8			*port_array;
+	/* Array of pointers to USB 3.0 PORTSC registers */
+	u32 __iomem		**usb3_ports;
+	unsigned int		num_usb3_ports;
+	/* Array of pointers to USB 2.0 PORTSC registers */
+	u32 __iomem		**usb2_ports;
+	unsigned int		num_usb2_ports;
 };
 
 /* For testing purposes */
diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
index c96f51de169..1732d9bc097 100644
--- a/drivers/usb/misc/usbled.c
+++ b/drivers/usb/misc/usbled.c
@@ -1,5 +1,5 @@
 /*
- * USB LED driver - 1.1
+ * USB LED driver
  *
  * Copyright (C) 2004 Greg Kroah-Hartman (greg@kroah.com)
  *
@@ -20,12 +20,17 @@
 #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com"
 #define DRIVER_DESC "USB LED Driver"
 
-#define VENDOR_ID	0x0fc5
-#define PRODUCT_ID	0x1223
+enum led_type {
+	DELCOM_VISUAL_SIGNAL_INDICATOR,
+	DREAM_CHEEKY_WEBMAIL_NOTIFIER,
+};
 
 /* table of devices that work with this driver */
 static const struct usb_device_id id_table[] = {
-	{ USB_DEVICE(VENDOR_ID, PRODUCT_ID) },
+	{ USB_DEVICE(0x0fc5, 0x1223),
+			.driver_info = DELCOM_VISUAL_SIGNAL_INDICATOR },
+	{ USB_DEVICE(0x1d34, 0x0004),
+			.driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
 	{ },
 };
 MODULE_DEVICE_TABLE (usb, id_table);
@@ -35,15 +40,12 @@ struct usb_led {
 	unsigned char		blue;
 	unsigned char		red;
 	unsigned char		green;
+	enum led_type		type;
 };
 
-#define BLUE	0x04
-#define RED	0x02
-#define GREEN	0x01
 static void change_color(struct usb_led *led)
 {
 	int retval;
-	unsigned char color = 0x07;
 	unsigned char *buffer;
 
 	buffer = kmalloc(8, GFP_KERNEL);
@@ -52,25 +54,59 @@ static void change_color(struct usb_led *led)
 		return;
 	}
 
-	if (led->blue)
-		color &= ~(BLUE);
-	if (led->red)
-		color &= ~(RED);
-	if (led->green)
-		color &= ~(GREEN);
-	dev_dbg(&led->udev->dev,
-		"blue = %d, red = %d, green = %d, color = %.2x\n",
-		led->blue, led->red, led->green, color);
-
-	retval = usb_control_msg(led->udev,
-				usb_sndctrlpipe(led->udev, 0),
-				0x12,
-				0xc8,
-				(0x02 * 0x100) + 0x0a,
-				(0x00 * 0x100) + color,
-				buffer,	
-				8,
-				2000);
+	switch (led->type) {
+	case DELCOM_VISUAL_SIGNAL_INDICATOR: {
+		unsigned char color = 0x07;
+
+		if (led->blue)
+			color &= ~0x04;
+		if (led->red)
+			color &= ~0x02;
+		if (led->green)
+			color &= ~0x01;
+		dev_dbg(&led->udev->dev,
+			"blue = %d, red = %d, green = %d, color = %.2x\n",
+			led->blue, led->red, led->green, color);
+
+		retval = usb_control_msg(led->udev,
+					usb_sndctrlpipe(led->udev, 0),
+					0x12,
+					0xc8,
+					(0x02 * 0x100) + 0x0a,
+					(0x00 * 0x100) + color,
+					buffer,
+					8,
+					2000);
+		break;
+	}
+
+	case DREAM_CHEEKY_WEBMAIL_NOTIFIER:
+		dev_dbg(&led->udev->dev,
+			"red = %d, green = %d, blue = %d\n",
+			led->red, led->green, led->blue);
+
+		buffer[0] = led->red;
+		buffer[1] = led->green;
+		buffer[2] = led->blue;
+		buffer[3] = buffer[4] = buffer[5] = 0;
+		buffer[6] = 0x1a;
+		buffer[7] = 0x05;
+
+		retval = usb_control_msg(led->udev,
+					usb_sndctrlpipe(led->udev, 0),
+					0x09,
+					0x21,
+					0x200,
+					0,
+					buffer,
+					8,
+					2000);
+		break;
+
+	default:
+		dev_err(&led->udev->dev, "unknown device type %d\n", led->type);
+	}
+
 	if (retval)
 		dev_dbg(&led->udev->dev, "retval = %d\n", retval);
 	kfree(buffer);
@@ -107,11 +143,12 @@ static int led_probe(struct usb_interface *interface, const struct usb_device_id
 
 	dev = kzalloc(sizeof(struct usb_led), GFP_KERNEL);
 	if (dev == NULL) {
-		dev_err(&interface->dev, "Out of memory\n");
+		dev_err(&interface->dev, "out of memory\n");
 		goto error_mem;
 	}
 
 	dev->udev = usb_get_dev(udev);
+	dev->type = id->driver_info;
 
 	usb_set_intfdata (interface, dev);
 
@@ -125,6 +162,31 @@ static int led_probe(struct usb_interface *interface, const struct usb_device_id
 	if (retval)
 		goto error;
 
+	if (dev->type == DREAM_CHEEKY_WEBMAIL_NOTIFIER) {
+		unsigned char *enable;
+
+		enable = kmemdup("\x1f\x02\0\x5f\0\0\x1a\x03", 8, GFP_KERNEL);
+		if (!enable) {
+			dev_err(&interface->dev, "out of memory\n");
+			retval = -ENOMEM;
+			goto error;
+		}
+
+		retval = usb_control_msg(udev,
+					usb_sndctrlpipe(udev, 0),
+					0x09,
+					0x21,
+					0x200,
+					0,
+					enable,
+					8,
+					2000);
+
+		kfree(enable);
+		if (retval != 8)
+			goto error;
+	}
+
 	dev_info(&interface->dev, "USB LED device now attached\n");
 	return 0;
 
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index 796e2f68f74..4ff21587ab0 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -3,7 +3,7 @@
 /*
  *	uss720.c  --  USS720 USB Parport Cable.
  *
- *	Copyright (C) 1999, 2005
+ *	Copyright (C) 1999, 2005, 2010
  *	    Thomas Sailer (t.sailer@alumni.ethz.ch)
  *
  *	This program is free software; you can redistribute it and/or modify
@@ -776,6 +776,8 @@ static const struct usb_device_id uss720_table[] = {
 	{ USB_DEVICE(0x0557, 0x2001) },
 	{ USB_DEVICE(0x0729, 0x1284) },
 	{ USB_DEVICE(0x1293, 0x0002) },
+	{ USB_DEVICE(0x1293, 0x0002) },
+	{ USB_DEVICE(0x050d, 0x0002) },
 	{ }						/* Terminating entry */
 };
 
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 719c6180b31..ac5bfd619e6 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -536,6 +536,7 @@ static const struct file_operations yurex_fops = {
 	.open =		yurex_open,
 	.release =	yurex_release,
 	.fasync	=	yurex_fasync,
+	.llseek =	default_llseek,
 };
 
 
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index c436e1e2c3b..a09dbd243eb 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -436,6 +436,28 @@ static unsigned int mon_bin_get_data(const struct mon_reader_bin *rp,
 	return length;
 }
 
+/*
+ * This is the look-ahead pass in case of 'C Zi', when actual_length cannot
+ * be used to determine the length of the whole contiguous buffer.
+ */
+static unsigned int mon_bin_collate_isodesc(const struct mon_reader_bin *rp,
+    struct urb *urb, unsigned int ndesc)
+{
+	struct usb_iso_packet_descriptor *fp;
+	unsigned int length;
+
+	length = 0;
+	fp = urb->iso_frame_desc;
+	while (ndesc-- != 0) {
+		if (fp->actual_length != 0) {
+			if (fp->offset + fp->actual_length > length)
+				length = fp->offset + fp->actual_length;
+		}
+		fp++;
+	}
+	return length;
+}
+
 static void mon_bin_get_isodesc(const struct mon_reader_bin *rp,
     unsigned int offset, struct urb *urb, char ev_type, unsigned int ndesc)
 {
@@ -478,6 +500,10 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
 	/*
 	 * Find the maximum allowable length, then allocate space.
 	 */
+	urb_length = (ev_type == 'S') ?
+	    urb->transfer_buffer_length : urb->actual_length;
+	length = urb_length;
+
 	if (usb_endpoint_xfer_isoc(epd)) {
 		if (urb->number_of_packets < 0) {
 			ndesc = 0;
@@ -486,14 +512,16 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
 		} else {
 			ndesc = urb->number_of_packets;
 		}
+		if (ev_type == 'C' && usb_urb_dir_in(urb))
+			length = mon_bin_collate_isodesc(rp, urb, ndesc);
 	} else {
 		ndesc = 0;
 	}
 	lendesc = ndesc*sizeof(struct mon_bin_isodesc);
 
-	urb_length = (ev_type == 'S') ?
-	    urb->transfer_buffer_length : urb->actual_length;
-	length = urb_length;
+	/* not an issue unless there's a subtle bug in a HCD somewhere */
+	if (length >= urb->transfer_buffer_length)
+		length = urb->transfer_buffer_length;
 
 	if (length >= rp->b_size/5)
 		length = rp->b_size/5;
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 341a37a469b..4cbb7e4b368 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -12,6 +12,7 @@ config USB_MUSB_HDRC
 	depends on (ARM || (BF54x && !BF544) || (BF52x && !BF522 && !BF523))
 	select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
 	select TWL4030_USB if MACH_OMAP_3430SDP
+	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 	select USB_OTG_UTILS
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	help
@@ -30,57 +31,41 @@ config USB_MUSB_HDRC
 	  If you do not know what this is, please say N.
 
 	  To compile this driver as a module, choose M here; the
-	  module will be called "musb_hdrc".
+	  module will be called "musb-hdrc".
 
-config USB_MUSB_SOC
-	boolean
+choice
+	prompt "Platform Glue Layer"
 	depends on USB_MUSB_HDRC
-	default y if ARCH_DAVINCI
-	default y if ARCH_OMAP2430
-	default y if ARCH_OMAP3
-	default y if ARCH_OMAP4
-	default y if (BF54x && !BF544)
-	default y if (BF52x && !BF522 && !BF523)
 
-comment "DaVinci 35x and 644x USB support"
-	depends on USB_MUSB_HDRC && ARCH_DAVINCI_DMx
+config USB_MUSB_DAVINCI
+	bool "DaVinci"
+	depends on ARCH_DAVINCI_DMx
 
-comment "DA8xx/OMAP-L1x USB support"
-	depends on USB_MUSB_HDRC && ARCH_DAVINCI_DA8XX
+config USB_MUSB_DA8XX
+	bool "DA8xx/OMAP-L1x"
+	depends on ARCH_DAVINCI_DA8XX
 
-comment "OMAP 243x high speed USB support"
-	depends on USB_MUSB_HDRC && ARCH_OMAP2430
+config USB_MUSB_TUSB6010
+	bool "TUSB6010"
+	depends on ARCH_OMAP
 
-comment "OMAP 343x high speed USB support"
-	depends on USB_MUSB_HDRC && ARCH_OMAP3
+config USB_MUSB_OMAP2PLUS
+	bool "OMAP2430 and onwards"
+	depends on ARCH_OMAP2PLUS
 
-comment "OMAP 44xx high speed USB support"
-	depends on USB_MUSB_HDRC && ARCH_OMAP4
+config USB_MUSB_AM35X
+	bool "AM35x"
+	depends on ARCH_OMAP
 
-comment "Blackfin high speed USB Support"
-	depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523))
+config USB_MUSB_BLACKFIN
+	bool "Blackfin"
+	depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
 
-config USB_MUSB_AM35X
-	bool
-	depends on USB_MUSB_HDRC && !ARCH_OMAP2430 && !ARCH_OMAP4
-	select NOP_USB_XCEIV
-	default MACH_OMAP3517EVM
-	help
-	  Select this option if your platform is based on AM35x. As
-	  AM35x has an updated MUSB with CPPI4.1 DMA so this config
-	  is introduced to differentiate musb ip between OMAP3x and
-	  AM35x platforms.
-
-config USB_TUSB6010
-	boolean "TUSB 6010 support"
-	depends on USB_MUSB_HDRC && !USB_MUSB_SOC
-	select NOP_USB_XCEIV
-	default y
-	help
-	  The TUSB 6010 chip, from Texas Instruments, connects a discrete
-	  HDRC core using a 16-bit parallel bus (NOR flash style) or VLYNQ
-	  (a high speed serial link).  It can use system-specific external
-	  DMA controllers.
+config USB_MUSB_UX500
+	bool "U8500 and U5500"
+	depends on (ARCH_U8500 && AB8500_USB) || (ARCH_U5500)
+
+endchoice
 
 choice
 	prompt "Driver Mode"
@@ -158,7 +143,7 @@ config USB_MUSB_HDRC_HCD
 config MUSB_PIO_ONLY
 	bool 'Disable DMA (always use PIO)'
 	depends on USB_MUSB_HDRC
-	default USB_TUSB6010 || ARCH_DAVINCI_DA8XX || USB_MUSB_AM35X
+	default USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X
 	help
 	  All data is copied between memory and FIFO by the CPU.
 	  DMA controllers are ignored.
@@ -171,21 +156,21 @@ config MUSB_PIO_ONLY
 config USB_INVENTRA_DMA
 	bool
 	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
-	default ARCH_OMAP2430 || ARCH_OMAP3 || BLACKFIN || ARCH_OMAP4
+	default USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
 	help
 	  Enable DMA transfers using Mentor's engine.
 
 config USB_TI_CPPI_DMA
 	bool
 	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
-	default ARCH_DAVINCI
+	default USB_MUSB_DAVINCI
 	help
 	  Enable DMA transfers when TI CPPI DMA is available.
 
 config USB_TUSB_OMAP_DMA
 	bool
 	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
-	depends on USB_TUSB6010
+	depends on USB_MUSB_TUSB6010
 	depends on ARCH_OMAP
 	default y
 	help
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index ce164e8998d..74df5284894 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -8,22 +8,19 @@ obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
 
 musb_hdrc-y := musb_core.o
 
-musb_hdrc-$(CONFIG_ARCH_DAVINCI_DMx)		+= davinci.o
-musb_hdrc-$(CONFIG_ARCH_DAVINCI_DA8XX)		+= da8xx.o
-musb_hdrc-$(CONFIG_USB_TUSB6010)		+= tusb6010.o
-musb_hdrc-$(CONFIG_ARCH_OMAP2430)		+= omap2430.o
-ifeq ($(CONFIG_USB_MUSB_AM35X),y)
-	musb_hdrc-$(CONFIG_ARCH_OMAP3430)	+= am35x.o
-else
-	musb_hdrc-$(CONFIG_ARCH_OMAP3430)	+= omap2430.o
-endif
-musb_hdrc-$(CONFIG_ARCH_OMAP4)			+= omap2430.o
-musb_hdrc-$(CONFIG_BF54x)			+= blackfin.o
-musb_hdrc-$(CONFIG_BF52x)			+= blackfin.o
 musb_hdrc-$(CONFIG_USB_GADGET_MUSB_HDRC)	+= musb_gadget_ep0.o musb_gadget.o
 musb_hdrc-$(CONFIG_USB_MUSB_HDRC_HCD)		+= musb_virthub.o musb_host.o
 musb_hdrc-$(CONFIG_DEBUG_FS)			+= musb_debugfs.o
 
+# Hardware Glue Layer
+obj-$(CONFIG_USB_MUSB_OMAP2PLUS)		+= omap2430.o
+obj-$(CONFIG_USB_MUSB_AM35X)			+= am35x.o
+obj-$(CONFIG_USB_MUSB_TUSB6010)			+= tusb6010.o
+obj-$(CONFIG_USB_MUSB_DAVINCI)			+= davinci.o
+obj-$(CONFIG_USB_MUSB_DA8XX)			+= da8xx.o
+obj-$(CONFIG_USB_MUSB_BLACKFIN)			+= blackfin.o
+obj-$(CONFIG_USB_MUSB_UX500)			+= ux500.o
+
 # the kconfig must guarantee that only one of the
 # possible I/O schemes will be enabled at a time ...
 # PIO only, or DMA (several potential schemes).
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index b0aabf3a606..d5a3da37c90 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -29,8 +29,9 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
-#include <plat/control.h>
 #include <plat/usb.h>
 
 #include "musb_core.h"
@@ -80,51 +81,18 @@
 
 #define USB_MENTOR_CORE_OFFSET	0x400
 
-static inline void phy_on(void)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(100);
-	u32 devconf2;
-
-	/*
-	 * Start the on-chip PHY and its PLL.
-	 */
-	devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-	devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
-	devconf2 |= CONF2_PHY_PLLON;
-
-	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-
-	DBG(1, "Waiting for PHY clock good...\n");
-	while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
-			& CONF2_PHYCLKGD)) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout)) {
-			DBG(1, "musb PHY clock good timed out\n");
-			break;
-		}
-	}
-}
-
-static inline void phy_off(void)
-{
-	u32 devconf2;
-
-	/*
-	 * Power down the on-chip PHY.
-	 */
-	devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-	devconf2 &= ~CONF2_PHY_PLLON;
-	devconf2 |=  CONF2_PHYPWRDN | CONF2_OTGPWRDN;
-	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-}
+struct am35x_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct clk		*phy_clk;
+	struct clk		*clk;
+};
+#define glue_to_musb(g)		platform_get_drvdata(g->musb)
 
 /*
- * musb_platform_enable - enable interrupts
+ * am35x_musb_enable - enable interrupts
  */
-void musb_platform_enable(struct musb *musb)
+static void am35x_musb_enable(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 	u32 epmask;
@@ -143,9 +111,9 @@ void musb_platform_enable(struct musb *musb)
 }
 
 /*
- * musb_platform_disable - disable HDRC and flush interrupts
+ * am35x_musb_disable - disable HDRC and flush interrupts
  */
-void musb_platform_disable(struct musb *musb)
+static void am35x_musb_disable(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 
@@ -162,7 +130,7 @@ void musb_platform_disable(struct musb *musb)
 #define portstate(stmt)
 #endif
 
-static void am35x_set_vbus(struct musb *musb, int is_on)
+static void am35x_musb_set_vbus(struct musb *musb, int is_on)
 {
 	WARN_ON(is_on && is_peripheral_active(musb));
 }
@@ -221,7 +189,7 @@ static void otg_timer(unsigned long _musb)
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
 
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout)
 {
 	static unsigned long last_timer;
 
@@ -251,13 +219,16 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 	mod_timer(&otg_workaround, timeout);
 }
 
-static irqreturn_t am35x_interrupt(int irq, void *hci)
+static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
 {
 	struct musb  *musb = hci;
 	void __iomem *reg_base = musb->ctrl_base;
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
 	unsigned long flags;
 	irqreturn_t ret = IRQ_NONE;
-	u32 epintr, usbintr, lvl_intr;
+	u32 epintr, usbintr;
 
 	spin_lock_irqsave(&musb->lock, flags);
 
@@ -346,9 +317,8 @@ eoi:
 	/* EOI needs to be written for the IRQ to be re-asserted. */
 	if (ret == IRQ_HANDLED || epintr || usbintr) {
 		/* clear level interrupt */
-		lvl_intr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-		lvl_intr |= AM35XX_USBOTGSS_INT_CLR;
-		omap_ctrl_writel(lvl_intr, AM35XX_CONTROL_LVL_INTR_CLEAR);
+		if (data->clear_irq)
+			data->clear_irq();
 		/* write EOI */
 		musb_writel(reg_base, USB_END_OF_INTR_REG, 0);
 	}
@@ -362,137 +332,85 @@ eoi:
 	return ret;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int am35x_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
-	u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+	int     retval = 0;
 
-	devconf2 &= ~CONF2_OTGMODE;
-	switch (musb_mode) {
-#ifdef	CONFIG_USB_MUSB_HDRC_HCD
-	case MUSB_HOST:		/* Force VBUS valid, ID = 0 */
-		devconf2 |= CONF2_FORCE_HOST;
-		break;
-#endif
-#ifdef	CONFIG_USB_GADGET_MUSB_HDRC
-	case MUSB_PERIPHERAL:	/* Force VBUS valid, ID = 1 */
-		devconf2 |= CONF2_FORCE_DEVICE;
-		break;
-#endif
-#ifdef	CONFIG_USB_MUSB_OTG
-	case MUSB_OTG:		/* Don't override the VBUS/ID comparators */
-		devconf2 |= CONF2_NO_OVERRIDE;
-		break;
-#endif
-	default:
-		DBG(2, "Trying to set unsupported mode %u\n", musb_mode);
-	}
+	if (data->set_mode)
+		data->set_mode(musb_mode);
+	else
+		retval = -EIO;
 
-	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-	return 0;
+	return retval;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static int am35x_musb_init(struct musb *musb)
 {
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
 	void __iomem *reg_base = musb->ctrl_base;
-	u32 rev, lvl_intr, sw_reset;
-	int status;
+	u32 rev;
 
 	musb->mregs += USB_MENTOR_CORE_OFFSET;
 
-	clk_enable(musb->clock);
-	DBG(2, "musb->clock=%lud\n", clk_get_rate(musb->clock));
-
-	musb->phy_clock = clk_get(musb->controller, "fck");
-	if (IS_ERR(musb->phy_clock)) {
-		status = PTR_ERR(musb->phy_clock);
-		goto exit0;
-	}
-	clk_enable(musb->phy_clock);
-	DBG(2, "musb->phy_clock=%lud\n", clk_get_rate(musb->phy_clock));
-
 	/* Returns zero if e.g. not clocked */
 	rev = musb_readl(reg_base, USB_REVISION_REG);
-	if (!rev) {
-		status = -ENODEV;
-		goto exit1;
-	}
+	if (!rev)
+		return -ENODEV;
 
 	usb_nop_xceiv_register();
 	musb->xceiv = otg_get_transceiver();
-	if (!musb->xceiv) {
-		status = -ENODEV;
-		goto exit1;
-	}
+	if (!musb->xceiv)
+		return -ENODEV;
 
 	if (is_host_enabled(musb))
 		setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
 
-	musb->board_set_vbus = am35x_set_vbus;
-
-	/* Global reset */
-	sw_reset = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-
-	sw_reset |= AM35XX_USBOTGSS_SW_RST;
-	omap_ctrl_writel(sw_reset, AM35XX_CONTROL_IP_SW_RESET);
-
-	sw_reset &= ~AM35XX_USBOTGSS_SW_RST;
-	omap_ctrl_writel(sw_reset, AM35XX_CONTROL_IP_SW_RESET);
+	/* Reset the musb */
+	if (data->reset)
+		data->reset();
 
 	/* Reset the controller */
 	musb_writel(reg_base, USB_CTRL_REG, AM35X_SOFT_RESET_MASK);
 
 	/* Start the on-chip PHY and its PLL. */
-	phy_on();
+	if (data->set_phy_power)
+		data->set_phy_power(1);
 
 	msleep(5);
 
-	musb->isr = am35x_interrupt;
+	musb->isr = am35x_musb_interrupt;
 
 	/* clear level interrupt */
-	lvl_intr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-	lvl_intr |= AM35XX_USBOTGSS_INT_CLR;
-	omap_ctrl_writel(lvl_intr, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	if (data->clear_irq)
+		data->clear_irq();
+
 	return 0;
-exit1:
-	clk_disable(musb->phy_clock);
-	clk_put(musb->phy_clock);
-exit0:
-	clk_disable(musb->clock);
-	return status;
 }
 
-int musb_platform_exit(struct musb *musb)
+static int am35x_musb_exit(struct musb *musb)
 {
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+
 	if (is_host_enabled(musb))
 		del_timer_sync(&otg_workaround);
 
-	phy_off();
+	/* Shutdown the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(0);
 
 	otg_put_transceiver(musb->xceiv);
 	usb_nop_xceiv_unregister();
 
-	clk_disable(musb->clock);
-
-	clk_disable(musb->phy_clock);
-	clk_put(musb->phy_clock);
-
 	return 0;
 }
 
-#ifdef CONFIG_PM
-void musb_platform_save_context(struct musb *musb,
-	struct musb_context_registers *musb_context)
-{
-	phy_off();
-}
-
-void musb_platform_restore_context(struct musb *musb,
-	struct musb_context_registers *musb_context)
-{
-	phy_on();
-}
-#endif
-
 /* AM35x supports only 32bit read operation */
 void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 {
@@ -522,3 +440,215 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 		memcpy(dst, &val, len);
 	}
 }
+
+static const struct musb_platform_ops am35x_ops = {
+	.init		= am35x_musb_init,
+	.exit		= am35x_musb_exit,
+
+	.enable		= am35x_musb_enable,
+	.disable	= am35x_musb_disable,
+
+	.set_mode	= am35x_musb_set_mode,
+	.try_idle	= am35x_musb_try_idle,
+
+	.set_vbus	= am35x_musb_set_vbus,
+};
+
+static u64 am35x_dmamask = DMA_BIT_MASK(32);
+
+static int __init am35x_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct am35x_glue		*glue;
+
+	struct clk			*phy_clk;
+	struct clk			*clk;
+
+	int				ret = -ENOMEM;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
+
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
+
+	phy_clk = clk_get(&pdev->dev, "fck");
+	if (IS_ERR(phy_clk)) {
+		dev_err(&pdev->dev, "failed to get PHY clock\n");
+		ret = PTR_ERR(phy_clk);
+		goto err2;
+	}
+
+	clk = clk_get(&pdev->dev, "ick");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err3;
+	}
+
+	ret = clk_enable(phy_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable PHY clock\n");
+		goto err4;
+	}
+
+	ret = clk_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err5;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &am35x_dmamask;
+	musb->dev.coherent_dma_mask	= am35x_dmamask;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->phy_clk			= phy_clk;
+	glue->clk			= clk;
+
+	pdata->platform_ops		= &am35x_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err6;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err6;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err6;
+	}
+
+	return 0;
+
+err6:
+	clk_disable(clk);
+
+err5:
+	clk_disable(phy_clk);
+
+err4:
+	clk_put(clk);
+
+err3:
+	clk_put(phy_clk);
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
+}
+
+static int __exit am35x_remove(struct platform_device *pdev)
+{
+	struct am35x_glue	*glue = platform_get_drvdata(pdev);
+
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+	clk_disable(glue->clk);
+	clk_disable(glue->phy_clk);
+	clk_put(glue->clk);
+	clk_put(glue->phy_clk);
+	kfree(glue);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int am35x_suspend(struct device *dev)
+{
+	struct am35x_glue	*glue = dev_get_drvdata(dev);
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+
+	/* Shutdown the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(0);
+
+	clk_disable(glue->phy_clk);
+	clk_disable(glue->clk);
+
+	return 0;
+}
+
+static int am35x_resume(struct device *dev)
+{
+	struct am35x_glue	*glue = dev_get_drvdata(dev);
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+	int			ret;
+
+	/* Start the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(1);
+
+	ret = clk_enable(glue->phy_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable PHY clock\n");
+		return ret;
+	}
+
+	ret = clk_enable(glue->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable clock\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct dev_pm_ops am35x_pm_ops = {
+	.suspend	= am35x_suspend,
+	.resume		= am35x_resume,
+};
+
+#define DEV_PM_OPS	&am35x_pm_ops
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static struct platform_driver am35x_driver = {
+	.remove		= __exit_p(am35x_remove),
+	.driver		= {
+		.name	= "musb-am35x",
+		.pm	= DEV_PM_OPS,
+	},
+};
+
+MODULE_DESCRIPTION("AM35x MUSB Glue Layer");
+MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init am35x_init(void)
+{
+	return platform_driver_probe(&am35x_driver, am35x_probe);
+}
+subsys_initcall(am35x_init);
+
+static void __exit am35x_exit(void)
+{
+	platform_driver_unregister(&am35x_driver);
+}
+module_exit(am35x_exit);
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index fcb5206a65b..eeba228eb2a 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -15,12 +15,20 @@
 #include <linux/list.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/cacheflush.h>
 
 #include "musb_core.h"
 #include "blackfin.h"
 
+struct bfin_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+};
+#define glue_to_musb(g)		platform_get_drvdata(g->musb)
+
 /*
  * Load an endpoint's FIFO
  */
@@ -278,7 +286,7 @@ static void musb_conn_timer_handler(unsigned long _musb)
 	DBG(4, "state is %s\n", otg_state_string(musb));
 }
 
-void musb_platform_enable(struct musb *musb)
+static void bfin_musb_enable(struct musb *musb)
 {
 	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
 		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
@@ -286,11 +294,11 @@ void musb_platform_enable(struct musb *musb)
 	}
 }
 
-void musb_platform_disable(struct musb *musb)
+static void bfin_musb_disable(struct musb *musb)
 {
 }
 
-static void bfin_set_vbus(struct musb *musb, int is_on)
+static void bfin_musb_set_vbus(struct musb *musb, int is_on)
 {
 	int value = musb->config->gpio_vrsel_active;
 	if (!is_on)
@@ -303,28 +311,28 @@ static void bfin_set_vbus(struct musb *musb, int is_on)
 		musb_readb(musb->mregs, MUSB_DEVCTL));
 }
 
-static int bfin_set_power(struct otg_transceiver *x, unsigned mA)
+static int bfin_musb_set_power(struct otg_transceiver *x, unsigned mA)
 {
 	return 0;
 }
 
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void bfin_musb_try_idle(struct musb *musb, unsigned long timeout)
 {
 	if (!is_otg_enabled(musb) && is_host_enabled(musb))
 		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
 }
 
-int musb_platform_get_vbus_status(struct musb *musb)
+static int bfin_musb_get_vbus_status(struct musb *musb)
 {
 	return 0;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
 	return -EIO;
 }
 
-static void musb_platform_reg_init(struct musb *musb)
+static void bfin_musb_reg_init(struct musb *musb)
 {
 	if (ANOMALY_05000346) {
 		bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
@@ -362,7 +370,7 @@ static void musb_platform_reg_init(struct musb *musb)
 	SSYNC();
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static int bfin_musb_init(struct musb *musb)
 {
 
 	/*
@@ -386,25 +394,124 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 		return -ENODEV;
 	}
 
-	musb_platform_reg_init(musb);
+	bfin_musb_reg_init(musb);
 
 	if (is_host_enabled(musb)) {
-		musb->board_set_vbus = bfin_set_vbus;
 		setup_timer(&musb_conn_timer,
 			musb_conn_timer_handler, (unsigned long) musb);
 	}
 	if (is_peripheral_enabled(musb))
-		musb->xceiv->set_power = bfin_set_power;
+		musb->xceiv->set_power = bfin_musb_set_power;
 
 	musb->isr = blackfin_interrupt;
 
 	return 0;
 }
 
+static int bfin_musb_exit(struct musb *musb)
+{
+	gpio_free(musb->config->gpio_vrsel);
+
+	otg_put_transceiver(musb->xceiv);
+	usb_nop_xceiv_unregister();
+	return 0;
+}
+
+static const struct musb_platform_ops bfin_ops = {
+	.init		= bfin_musb_init,
+	.exit		= bfin_musb_exit,
+
+	.enable		= bfin_musb_enable,
+	.disable	= bfin_musb_disable,
+
+	.set_mode	= bfin_musb_set_mode,
+	.try_idle	= bfin_musb_try_idle,
+
+	.vbus_status	= bfin_musb_vbus_status,
+	.set_vbus	= bfin_musb_set_vbus,
+};
+
+static u64 bfin_dmamask = DMA_BIT_MASK(32);
+
+static int __init bfin_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct bfin_glue		*glue;
+
+	int				ret = -ENOMEM;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
+
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &bfin_dmamask;
+	musb->dev.coherent_dma_mask	= bfin_dmamask;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+
+	pdata->platform_ops		= &bfin_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err2;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err2;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err2;
+	}
+
+	return 0;
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
+}
+
+static int __exit bfin_remove(struct platform_device *pdev)
+{
+	struct bfin_glue		*glue = platform_get_drvdata(pdev);
+
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+	kfree(glue);
+
+	return 0;
+}
+
 #ifdef CONFIG_PM
-void musb_platform_save_context(struct musb *musb,
-			struct musb_context_registers *musb_context)
+static int bfin_suspend(struct device *dev)
 {
+	struct bfin_glue	*glue = dev_get_drvdata(dev);
+	struct musb		*musb = glue_to_musb(glue);
+
 	if (is_host_active(musb))
 		/*
 		 * During hibernate gpio_vrsel will change from high to low
@@ -413,20 +520,50 @@ void musb_platform_save_context(struct musb *musb,
 		 * wakeup event.
 		 */
 		gpio_set_value(musb->config->gpio_vrsel, 0);
+
+	return 0;
 }
 
-void musb_platform_restore_context(struct musb *musb,
-			struct musb_context_registers *musb_context)
+static int bfin_resume(struct device *dev)
 {
-	musb_platform_reg_init(musb);
+	struct bfin_glue	*glue = dev_get_drvdata(dev);
+	struct musb		*musb = glue_to_musb(glue);
+
+	bfin_musb_reg_init(musb);
+
+	return 0;
 }
+
+static struct dev_pm_ops bfin_pm_ops = {
+	.suspend	= bfin_suspend,
+	.resume		= bfin_resume,
+};
+
+#define DEV_PM_OPS	&bfin_pm_op,
+#else
+#define DEV_PM_OPS	NULL
 #endif
 
-int musb_platform_exit(struct musb *musb)
+static struct platform_driver bfin_driver = {
+	.remove		= __exit_p(bfin_remove),
+	.driver		= {
+		.name	= "musb-bfin",
+		.pm	= DEV_PM_OPS,
+	},
+};
+
+MODULE_DESCRIPTION("Blackfin MUSB Glue Layer");
+MODULE_AUTHOR("Bryan Wy <cooloney@kernel.org>");
+MODULE_LICENSE("GPL v2");
+
+static int __init bfin_init(void)
 {
-	gpio_free(musb->config->gpio_vrsel);
+	return platform_driver_probe(&bfin_driver, bfin_probe);
+}
+subsys_initcall(bfin_init);
 
-	otg_put_transceiver(musb->xceiv);
-	usb_nop_xceiv_unregister();
-	return 0;
+static void __exit bfin_exit(void)
+{
+	platform_driver_unregister(&bfin_driver);
 }
+module_exit(bfin_exit);
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index f5a65ff0ac2..de55a3c3259 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -1308,7 +1308,7 @@ dma_controller_create(struct musb *musb, void __iomem *mregs)
 	struct cppi		*controller;
 	struct device		*dev = musb->controller;
 	struct platform_device	*pdev = to_platform_device(dev);
-	int			irq = platform_get_irq(pdev, 1);
+	int			irq = platform_get_irq_byname(pdev, "dma");
 
 	controller = kzalloc(sizeof *controller, GFP_KERNEL);
 	if (!controller)
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 84427bebbf6..69a0da3c8f0 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -29,6 +29,8 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include <mach/da8xx.h>
 #include <mach/usb.h>
@@ -78,6 +80,12 @@
 
 #define CFGCHIP2	IO_ADDRESS(DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP2_REG)
 
+struct da8xx_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct clk		*clk;
+};
+
 /*
  * REVISIT (PM): we should be able to keep the PHY in low power mode most
  * of the time (24 MHz oscillator and PLL off, etc.) by setting POWER.D0
@@ -131,9 +139,9 @@ static inline void phy_off(void)
  */
 
 /**
- * musb_platform_enable - enable interrupts
+ * da8xx_musb_enable - enable interrupts
  */
-void musb_platform_enable(struct musb *musb)
+static void da8xx_musb_enable(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 	u32 mask;
@@ -151,9 +159,9 @@ void musb_platform_enable(struct musb *musb)
 }
 
 /**
- * musb_platform_disable - disable HDRC and flush interrupts
+ * da8xx_musb_disable - disable HDRC and flush interrupts
  */
-void musb_platform_disable(struct musb *musb)
+static void da8xx_musb_disable(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 
@@ -170,7 +178,7 @@ void musb_platform_disable(struct musb *musb)
 #define portstate(stmt)
 #endif
 
-static void da8xx_set_vbus(struct musb *musb, int is_on)
+static void da8xx_musb_set_vbus(struct musb *musb, int is_on)
 {
 	WARN_ON(is_on && is_peripheral_active(musb));
 }
@@ -252,7 +260,7 @@ static void otg_timer(unsigned long _musb)
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
 
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout)
 {
 	static unsigned long last_timer;
 
@@ -282,7 +290,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 	mod_timer(&otg_workaround, timeout);
 }
 
-static irqreturn_t da8xx_interrupt(int irq, void *hci)
+static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
 {
 	struct musb		*musb = hci;
 	void __iomem		*reg_base = musb->ctrl_base;
@@ -380,7 +388,7 @@ static irqreturn_t da8xx_interrupt(int irq, void *hci)
 	return ret;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
 	u32 cfgchip2 = __raw_readl(CFGCHIP2);
 
@@ -409,15 +417,13 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
 	return 0;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static int da8xx_musb_init(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 	u32 rev;
 
 	musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
 
-	clk_enable(musb->clock);
-
 	/* Returns zero if e.g. not clocked */
 	rev = musb_readl(reg_base, DA8XX_USB_REVISION_REG);
 	if (!rev)
@@ -431,8 +437,6 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 	if (is_host_enabled(musb))
 		setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
 
-	musb->board_set_vbus = da8xx_set_vbus;
-
 	/* Reset the controller */
 	musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK);
 
@@ -446,14 +450,13 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 		 rev, __raw_readl(CFGCHIP2),
 		 musb_readb(reg_base, DA8XX_USB_CTRL_REG));
 
-	musb->isr = da8xx_interrupt;
+	musb->isr = da8xx_musb_interrupt;
 	return 0;
 fail:
-	clk_disable(musb->clock);
 	return -ENODEV;
 }
 
-int musb_platform_exit(struct musb *musb)
+static int da8xx_musb_exit(struct musb *musb)
 {
 	if (is_host_enabled(musb))
 		del_timer_sync(&otg_workaround);
@@ -463,7 +466,140 @@ int musb_platform_exit(struct musb *musb)
 	otg_put_transceiver(musb->xceiv);
 	usb_nop_xceiv_unregister();
 
-	clk_disable(musb->clock);
+	return 0;
+}
+
+static const struct musb_platform_ops da8xx_ops = {
+	.init		= da8xx_musb_init,
+	.exit		= da8xx_musb_exit,
+
+	.enable		= da8xx_musb_enable,
+	.disable	= da8xx_musb_disable,
+
+	.set_mode	= da8xx_musb_set_mode,
+	.try_idle	= da8xx_musb_try_idle,
+
+	.set_vbus	= da8xx_musb_set_vbus,
+};
+
+static u64 da8xx_dmamask = DMA_BIT_MASK(32);
+
+static int __init da8xx_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct da8xx_glue		*glue;
+
+	struct clk			*clk;
+
+	int				ret = -ENOMEM;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
+
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
+
+	clk = clk_get(&pdev->dev, "usb20");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err2;
+	}
+
+	ret = clk_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err3;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &da8xx_dmamask;
+	musb->dev.coherent_dma_mask	= da8xx_dmamask;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->clk			= clk;
+
+	pdata->platform_ops		= &da8xx_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err4;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err4;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err4;
+	}
+
+	return 0;
+
+err4:
+	clk_disable(clk);
+
+err3:
+	clk_put(clk);
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
+}
+
+static int __exit da8xx_remove(struct platform_device *pdev)
+{
+	struct da8xx_glue		*glue = platform_get_drvdata(pdev);
+
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+	clk_disable(glue->clk);
+	clk_put(glue->clk);
+	kfree(glue);
 
 	return 0;
 }
+
+static struct platform_driver da8xx_driver = {
+	.remove		= __exit_p(da8xx_remove),
+	.driver		= {
+		.name	= "musb-da8xx",
+	},
+};
+
+MODULE_DESCRIPTION("DA8xx/OMAP-L1x MUSB Glue Layer");
+MODULE_AUTHOR("Sergei Shtylyov <sshtylyov@ru.mvista.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init da8xx_init(void)
+{
+	return platform_driver_probe(&da8xx_driver, da8xx_probe);
+}
+subsys_initcall(da8xx_init);
+
+static void __exit da8xx_exit(void)
+{
+	platform_driver_unregister(&da8xx_driver);
+}
+module_exit(da8xx_exit);
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 6e67629f50c..e6de097fb7e 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -30,6 +30,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include <mach/hardware.h>
 #include <mach/memory.h>
@@ -51,6 +53,12 @@
 #define USB_PHY_CTRL	IO_ADDRESS(USBPHY_CTL_PADDR)
 #define DM355_DEEPSLEEP	IO_ADDRESS(DM355_DEEPSLEEP_PADDR)
 
+struct davinci_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct clk		*clk;
+};
+
 /* REVISIT (PM) we should be able to keep the PHY in low power mode most
  * of the time (24 MHZ oscillator and PLL off, etc) by setting POWER.D0
  * and, when in host mode, autosuspending idle root ports... PHYPLLON
@@ -83,7 +91,7 @@ static inline void phy_off(void)
 
 static int dma_off = 1;
 
-void musb_platform_enable(struct musb *musb)
+static void davinci_musb_enable(struct musb *musb)
 {
 	u32	tmp, old, val;
 
@@ -116,7 +124,7 @@ void musb_platform_enable(struct musb *musb)
 /*
  * Disable the HDRC and flush interrupts
  */
-void musb_platform_disable(struct musb *musb)
+static void davinci_musb_disable(struct musb *musb)
 {
 	/* because we don't set CTRLR.UINT, "important" to:
 	 *  - not read/write INTRUSB/INTRUSBE
@@ -167,7 +175,7 @@ static void evm_deferred_drvvbus(struct work_struct *ignored)
 
 #endif	/* EVM */
 
-static void davinci_source_power(struct musb *musb, int is_on, int immediate)
+static void davinci_musb_source_power(struct musb *musb, int is_on, int immediate)
 {
 #ifdef CONFIG_MACH_DAVINCI_EVM
 	if (is_on)
@@ -190,10 +198,10 @@ static void davinci_source_power(struct musb *musb, int is_on, int immediate)
 #endif
 }
 
-static void davinci_set_vbus(struct musb *musb, int is_on)
+static void davinci_musb_set_vbus(struct musb *musb, int is_on)
 {
 	WARN_ON(is_on && is_peripheral_active(musb));
-	davinci_source_power(musb, is_on, 0);
+	davinci_musb_source_power(musb, is_on, 0);
 }
 
 
@@ -259,7 +267,7 @@ static void otg_timer(unsigned long _musb)
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
 
-static irqreturn_t davinci_interrupt(int irq, void *__hci)
+static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
 {
 	unsigned long	flags;
 	irqreturn_t	retval = IRQ_NONE;
@@ -345,7 +353,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 		/* NOTE:  this must complete poweron within 100 msec
 		 * (OTG_TIME_A_WAIT_VRISE) but we don't check for that.
 		 */
-		davinci_source_power(musb, drvvbus, 0);
+		davinci_musb_source_power(musb, drvvbus, 0);
 		DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
 				drvvbus ? "on" : "off",
 				otg_state_string(musb),
@@ -370,13 +378,13 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 	return retval;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 mode)
+static int davinci_musb_set_mode(struct musb *musb, u8 mode)
 {
 	/* EVM can't do this (right?) */
 	return -EIO;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static int davinci_musb_init(struct musb *musb)
 {
 	void __iomem	*tibase = musb->ctrl_base;
 	u32		revision;
@@ -388,8 +396,6 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 
 	musb->mregs += DAVINCI_BASE_OFFSET;
 
-	clk_enable(musb->clock);
-
 	/* returns zero if e.g. not clocked */
 	revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
 	if (revision == 0)
@@ -398,8 +404,7 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 	if (is_host_enabled(musb))
 		setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
 
-	musb->board_set_vbus = davinci_set_vbus;
-	davinci_source_power(musb, 0, 1);
+	davinci_musb_source_power(musb, 0, 1);
 
 	/* dm355 EVM swaps D+/D- for signal integrity, and
 	 * is clocked from the main 24 MHz crystal.
@@ -440,18 +445,16 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 		revision, __raw_readl(USB_PHY_CTRL),
 		musb_readb(tibase, DAVINCI_USB_CTRL_REG));
 
-	musb->isr = davinci_interrupt;
+	musb->isr = davinci_musb_interrupt;
 	return 0;
 
 fail:
-	clk_disable(musb->clock);
-
 	otg_put_transceiver(musb->xceiv);
 	usb_nop_xceiv_unregister();
 	return -ENODEV;
 }
 
-int musb_platform_exit(struct musb *musb)
+static int davinci_musb_exit(struct musb *musb)
 {
 	if (is_host_enabled(musb))
 		del_timer_sync(&otg_workaround);
@@ -465,7 +468,7 @@ int musb_platform_exit(struct musb *musb)
 		__raw_writel(deepsleep, DM355_DEEPSLEEP);
 	}
 
-	davinci_source_power(musb, 0 /*off*/, 1);
+	davinci_musb_source_power(musb, 0 /*off*/, 1);
 
 	/* delay, to avoid problems with module reload */
 	if (is_host_enabled(musb) && musb->xceiv->default_a) {
@@ -495,10 +498,141 @@ int musb_platform_exit(struct musb *musb)
 
 	phy_off();
 
-	clk_disable(musb->clock);
-
 	otg_put_transceiver(musb->xceiv);
 	usb_nop_xceiv_unregister();
 
 	return 0;
 }
+
+static const struct musb_platform_ops davinci_ops = {
+	.init		= davinci_musb_init,
+	.exit		= davinci_musb_exit,
+
+	.enable		= davinci_musb_enable,
+	.disable	= davinci_musb_disable,
+
+	.set_mode	= davinci_musb_set_mode,
+
+	.set_vbus	= davinci_musb_set_vbus,
+};
+
+static u64 davinci_dmamask = DMA_BIT_MASK(32);
+
+static int __init davinci_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct davinci_glue		*glue;
+	struct clk			*clk;
+
+	int				ret = -ENOMEM;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
+
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
+
+	clk = clk_get(&pdev->dev, "usb");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err2;
+	}
+
+	ret = clk_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err3;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &davinci_dmamask;
+	musb->dev.coherent_dma_mask	= davinci_dmamask;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->clk			= clk;
+
+	pdata->platform_ops		= &davinci_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err4;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err4;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err4;
+	}
+
+	return 0;
+
+err4:
+	clk_disable(clk);
+
+err3:
+	clk_put(clk);
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
+}
+
+static int __exit davinci_remove(struct platform_device *pdev)
+{
+	struct davinci_glue		*glue = platform_get_drvdata(pdev);
+
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+	clk_disable(glue->clk);
+	clk_put(glue->clk);
+	kfree(glue);
+
+	return 0;
+}
+
+static struct platform_driver davinci_driver = {
+	.remove		= __exit_p(davinci_remove),
+	.driver		= {
+		.name	= "musb-davinci",
+	},
+};
+
+MODULE_DESCRIPTION("DaVinci MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init davinci_init(void)
+{
+	return platform_driver_probe(&davinci_driver, davinci_probe);
+}
+subsys_initcall(davinci_init);
+
+static void __exit davinci_exit(void)
+{
+	platform_driver_unregister(&davinci_driver);
+}
+module_exit(davinci_exit);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index e6669fc3b80..07cf394e491 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -99,19 +99,8 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#ifdef	CONFIG_ARM
-#include <mach/hardware.h>
-#include <mach/memory.h>
-#include <asm/mach-types.h>
-#endif
-
 #include "musb_core.h"
 
-
-#ifdef CONFIG_ARCH_DAVINCI
-#include "davinci.h"
-#endif
-
 #define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON)
 
 
@@ -126,7 +115,7 @@ MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
 
 #define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
 
-#define MUSB_DRIVER_NAME "musb_hdrc"
+#define MUSB_DRIVER_NAME "musb-hdrc"
 const char musb_driver_name[] = MUSB_DRIVER_NAME;
 
 MODULE_DESCRIPTION(DRIVER_INFO);
@@ -230,7 +219,7 @@ static struct otg_io_access_ops musb_ulpi_access = {
 
 /*-------------------------------------------------------------------------*/
 
-#if !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
+#if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_BLACKFIN)
 
 /*
  * Load an endpoint's FIFO
@@ -390,7 +379,7 @@ void musb_otg_timer_func(unsigned long data)
 	case OTG_STATE_A_SUSPEND:
 	case OTG_STATE_A_WAIT_BCON:
 		DBG(1, "HNP: %s timeout\n", otg_state_string(musb));
-		musb_set_vbus(musb, 0);
+		musb_platform_set_vbus(musb, 0);
 		musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
 		break;
 	default:
@@ -571,7 +560,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		musb->ep0_stage = MUSB_EP0_START;
 		musb->xceiv->state = OTG_STATE_A_IDLE;
 		MUSB_HST_MODE(musb);
-		musb_set_vbus(musb, 1);
+		musb_platform_set_vbus(musb, 1);
 
 		handled = IRQ_HANDLED;
 	}
@@ -642,7 +631,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 
 		/* go through A_WAIT_VFALL then start a new session */
 		if (!ignore)
-			musb_set_vbus(musb, 0);
+			musb_platform_set_vbus(musb, 0);
 		handled = IRQ_HANDLED;
 	}
 
@@ -1049,8 +1038,6 @@ static void musb_shutdown(struct platform_device *pdev)
 	spin_lock_irqsave(&musb->lock, flags);
 	musb_platform_disable(musb);
 	musb_generic_disable(musb);
-	if (musb->clock)
-		clk_put(musb->clock);
 	spin_unlock_irqrestore(&musb->lock, flags);
 
 	if (!is_otg_enabled(musb) && is_host_enabled(musb))
@@ -1074,10 +1061,11 @@ static void musb_shutdown(struct platform_device *pdev)
  * We don't currently use dynamic fifo setup capability to do anything
  * more than selecting one of a bunch of predefined configurations.
  */
-#if defined(CONFIG_USB_TUSB6010) || \
-	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) \
-	|| defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_OMAP2PLUS) \
+	|| defined(CONFIG_USB_MUSB_AM35X)
 static ushort __initdata fifo_mode = 4;
+#elif defined(CONFIG_USB_MUSB_UX500)
+static ushort __initdata fifo_mode = 5;
 #else
 static ushort __initdata fifo_mode = 2;
 #endif
@@ -1501,7 +1489,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 		struct musb_hw_ep	*hw_ep = musb->endpoints + i;
 
 		hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase;
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 		hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i);
 		hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i);
 		hw_ep->fifo_sync_va =
@@ -1548,7 +1536,8 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) || \
-	defined(CONFIG_ARCH_OMAP4)
+	defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) || \
+	defined(CONFIG_ARCH_U5500)
 
 static irqreturn_t generic_interrupt(int irq, void *__hci)
 {
@@ -1904,6 +1893,7 @@ allocate_instance(struct device *dev,
 	}
 
 	musb->controller = dev;
+
 	return musb;
 }
 
@@ -2000,30 +1990,14 @@ bad_config:
 	spin_lock_init(&musb->lock);
 	musb->board_mode = plat->mode;
 	musb->board_set_power = plat->set_power;
-	musb->set_clock = plat->set_clock;
 	musb->min_power = plat->min_power;
-
-	/* Clock usage is chip-specific ... functional clock (DaVinci,
-	 * OMAP2430), or PHY ref (some TUSB6010 boards).  All this core
-	 * code does is make sure a clock handle is available; platform
-	 * code manages it during start/stop and suspend/resume.
-	 */
-	if (plat->clock) {
-		musb->clock = clk_get(dev, plat->clock);
-		if (IS_ERR(musb->clock)) {
-			status = PTR_ERR(musb->clock);
-			musb->clock = NULL;
-			goto fail1;
-		}
-	}
+	musb->ops = plat->platform_ops;
 
 	/* The musb_platform_init() call:
 	 *   - adjusts musb->mregs and musb->isr if needed,
 	 *   - may initialize an integrated tranceiver
 	 *   - initializes musb->xceiv, usually by otg_get_transceiver()
-	 *   - activates clocks.
 	 *   - stops powering VBUS
-	 *   - assigns musb->board_set_vbus if host mode is enabled
 	 *
 	 * There are various transciever configurations.  Blackfin,
 	 * DaVinci, TUSB60x0, and others integrate them.  OMAP3 uses
@@ -2031,9 +2005,9 @@ bad_config:
 	 * isp1504, non-OTG, etc) mostly hooking up through ULPI.
 	 */
 	musb->isr = generic_interrupt;
-	status = musb_platform_init(musb, plat->board_data);
+	status = musb_platform_init(musb);
 	if (status < 0)
-		goto fail2;
+		goto fail1;
 
 	if (!musb->isr) {
 		status = -ENODEV;
@@ -2116,12 +2090,15 @@ bad_config:
 	 * Otherwise, wait till the gadget driver hooks up.
 	 */
 	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
+		struct usb_hcd	*hcd = musb_to_hcd(musb);
+
 		MUSB_HST_MODE(musb);
 		musb->xceiv->default_a = 1;
 		musb->xceiv->state = OTG_STATE_A_IDLE;
 
 		status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
 
+		hcd->self.uses_pio_for_control = 1;
 		DBG(1, "%s mode, status %d, devctl %02x %c\n",
 			"HOST", status,
 			musb_readb(musb->mregs, MUSB_DEVCTL),
@@ -2183,10 +2160,6 @@ fail3:
 		device_init_wakeup(dev, 0);
 	musb_platform_exit(musb);
 
-fail2:
-	if (musb->clock)
-		clk_put(musb->clock);
-
 fail1:
 	dev_err(musb->controller,
 		"musb_init_controller failed with status %d\n", status);
@@ -2212,7 +2185,7 @@ static u64	*orig_dma_mask;
 static int __init musb_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
-	int		irq = platform_get_irq(pdev, 0);
+	int		irq = platform_get_irq_byname(pdev, "mc");
 	int		status;
 	struct resource	*iomem;
 	void __iomem	*base;
@@ -2262,144 +2235,138 @@ static int __exit musb_remove(struct platform_device *pdev)
 
 #ifdef	CONFIG_PM
 
-static struct musb_context_registers musb_context;
-
-void musb_save_context(struct musb *musb)
+static void musb_save_context(struct musb *musb)
 {
 	int i;
 	void __iomem *musb_base = musb->mregs;
 	void __iomem *epio;
 
 	if (is_host_enabled(musb)) {
-		musb_context.frame = musb_readw(musb_base, MUSB_FRAME);
-		musb_context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
-		musb_context.busctl = musb_read_ulpi_buscontrol(musb->mregs);
+		musb->context.frame = musb_readw(musb_base, MUSB_FRAME);
+		musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
+		musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs);
 	}
-	musb_context.power = musb_readb(musb_base, MUSB_POWER);
-	musb_context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE);
-	musb_context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE);
-	musb_context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
-	musb_context.index = musb_readb(musb_base, MUSB_INDEX);
-	musb_context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
+	musb->context.power = musb_readb(musb_base, MUSB_POWER);
+	musb->context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE);
+	musb->context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE);
+	musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
+	musb->context.index = musb_readb(musb_base, MUSB_INDEX);
+	musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
 
 	for (i = 0; i < musb->config->num_eps; ++i) {
 		epio = musb->endpoints[i].regs;
-		musb_context.index_regs[i].txmaxp =
+		musb->context.index_regs[i].txmaxp =
 			musb_readw(epio, MUSB_TXMAXP);
-		musb_context.index_regs[i].txcsr =
+		musb->context.index_regs[i].txcsr =
 			musb_readw(epio, MUSB_TXCSR);
-		musb_context.index_regs[i].rxmaxp =
+		musb->context.index_regs[i].rxmaxp =
 			musb_readw(epio, MUSB_RXMAXP);
-		musb_context.index_regs[i].rxcsr =
+		musb->context.index_regs[i].rxcsr =
 			musb_readw(epio, MUSB_RXCSR);
 
 		if (musb->dyn_fifo) {
-			musb_context.index_regs[i].txfifoadd =
+			musb->context.index_regs[i].txfifoadd =
 					musb_read_txfifoadd(musb_base);
-			musb_context.index_regs[i].rxfifoadd =
+			musb->context.index_regs[i].rxfifoadd =
 					musb_read_rxfifoadd(musb_base);
-			musb_context.index_regs[i].txfifosz =
+			musb->context.index_regs[i].txfifosz =
 					musb_read_txfifosz(musb_base);
-			musb_context.index_regs[i].rxfifosz =
+			musb->context.index_regs[i].rxfifosz =
 					musb_read_rxfifosz(musb_base);
 		}
 		if (is_host_enabled(musb)) {
-			musb_context.index_regs[i].txtype =
+			musb->context.index_regs[i].txtype =
 				musb_readb(epio, MUSB_TXTYPE);
-			musb_context.index_regs[i].txinterval =
+			musb->context.index_regs[i].txinterval =
 				musb_readb(epio, MUSB_TXINTERVAL);
-			musb_context.index_regs[i].rxtype =
+			musb->context.index_regs[i].rxtype =
 				musb_readb(epio, MUSB_RXTYPE);
-			musb_context.index_regs[i].rxinterval =
+			musb->context.index_regs[i].rxinterval =
 				musb_readb(epio, MUSB_RXINTERVAL);
 
-			musb_context.index_regs[i].txfunaddr =
+			musb->context.index_regs[i].txfunaddr =
 				musb_read_txfunaddr(musb_base, i);
-			musb_context.index_regs[i].txhubaddr =
+			musb->context.index_regs[i].txhubaddr =
 				musb_read_txhubaddr(musb_base, i);
-			musb_context.index_regs[i].txhubport =
+			musb->context.index_regs[i].txhubport =
 				musb_read_txhubport(musb_base, i);
 
-			musb_context.index_regs[i].rxfunaddr =
+			musb->context.index_regs[i].rxfunaddr =
 				musb_read_rxfunaddr(musb_base, i);
-			musb_context.index_regs[i].rxhubaddr =
+			musb->context.index_regs[i].rxhubaddr =
 				musb_read_rxhubaddr(musb_base, i);
-			musb_context.index_regs[i].rxhubport =
+			musb->context.index_regs[i].rxhubport =
 				musb_read_rxhubport(musb_base, i);
 		}
 	}
-
-	musb_platform_save_context(musb, &musb_context);
 }
 
-void musb_restore_context(struct musb *musb)
+static void musb_restore_context(struct musb *musb)
 {
 	int i;
 	void __iomem *musb_base = musb->mregs;
 	void __iomem *ep_target_regs;
 	void __iomem *epio;
 
-	musb_platform_restore_context(musb, &musb_context);
-
 	if (is_host_enabled(musb)) {
-		musb_writew(musb_base, MUSB_FRAME, musb_context.frame);
-		musb_writeb(musb_base, MUSB_TESTMODE, musb_context.testmode);
-		musb_write_ulpi_buscontrol(musb->mregs, musb_context.busctl);
+		musb_writew(musb_base, MUSB_FRAME, musb->context.frame);
+		musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode);
+		musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl);
 	}
-	musb_writeb(musb_base, MUSB_POWER, musb_context.power);
-	musb_writew(musb_base, MUSB_INTRTXE, musb_context.intrtxe);
-	musb_writew(musb_base, MUSB_INTRRXE, musb_context.intrrxe);
-	musb_writeb(musb_base, MUSB_INTRUSBE, musb_context.intrusbe);
-	musb_writeb(musb_base, MUSB_DEVCTL, musb_context.devctl);
+	musb_writeb(musb_base, MUSB_POWER, musb->context.power);
+	musb_writew(musb_base, MUSB_INTRTXE, musb->context.intrtxe);
+	musb_writew(musb_base, MUSB_INTRRXE, musb->context.intrrxe);
+	musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe);
+	musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl);
 
 	for (i = 0; i < musb->config->num_eps; ++i) {
 		epio = musb->endpoints[i].regs;
 		musb_writew(epio, MUSB_TXMAXP,
-			musb_context.index_regs[i].txmaxp);
+			musb->context.index_regs[i].txmaxp);
 		musb_writew(epio, MUSB_TXCSR,
-			musb_context.index_regs[i].txcsr);
+			musb->context.index_regs[i].txcsr);
 		musb_writew(epio, MUSB_RXMAXP,
-			musb_context.index_regs[i].rxmaxp);
+			musb->context.index_regs[i].rxmaxp);
 		musb_writew(epio, MUSB_RXCSR,
-			musb_context.index_regs[i].rxcsr);
+			musb->context.index_regs[i].rxcsr);
 
 		if (musb->dyn_fifo) {
 			musb_write_txfifosz(musb_base,
-				musb_context.index_regs[i].txfifosz);
+				musb->context.index_regs[i].txfifosz);
 			musb_write_rxfifosz(musb_base,
-				musb_context.index_regs[i].rxfifosz);
+				musb->context.index_regs[i].rxfifosz);
 			musb_write_txfifoadd(musb_base,
-				musb_context.index_regs[i].txfifoadd);
+				musb->context.index_regs[i].txfifoadd);
 			musb_write_rxfifoadd(musb_base,
-				musb_context.index_regs[i].rxfifoadd);
+				musb->context.index_regs[i].rxfifoadd);
 		}
 
 		if (is_host_enabled(musb)) {
 			musb_writeb(epio, MUSB_TXTYPE,
-				musb_context.index_regs[i].txtype);
+				musb->context.index_regs[i].txtype);
 			musb_writeb(epio, MUSB_TXINTERVAL,
-				musb_context.index_regs[i].txinterval);
+				musb->context.index_regs[i].txinterval);
 			musb_writeb(epio, MUSB_RXTYPE,
-				musb_context.index_regs[i].rxtype);
+				musb->context.index_regs[i].rxtype);
 			musb_writeb(epio, MUSB_RXINTERVAL,
 
-			musb_context.index_regs[i].rxinterval);
+			musb->context.index_regs[i].rxinterval);
 			musb_write_txfunaddr(musb_base, i,
-				musb_context.index_regs[i].txfunaddr);
+				musb->context.index_regs[i].txfunaddr);
 			musb_write_txhubaddr(musb_base, i,
-				musb_context.index_regs[i].txhubaddr);
+				musb->context.index_regs[i].txhubaddr);
 			musb_write_txhubport(musb_base, i,
-				musb_context.index_regs[i].txhubport);
+				musb->context.index_regs[i].txhubport);
 
 			ep_target_regs =
 				musb_read_target_reg_base(i, musb_base);
 
 			musb_write_rxfunaddr(ep_target_regs,
-				musb_context.index_regs[i].rxfunaddr);
+				musb->context.index_regs[i].rxfunaddr);
 			musb_write_rxhubaddr(ep_target_regs,
-				musb_context.index_regs[i].rxhubaddr);
+				musb->context.index_regs[i].rxhubaddr);
 			musb_write_rxhubport(ep_target_regs,
-				musb_context.index_regs[i].rxhubport);
+				musb->context.index_regs[i].rxhubport);
 		}
 	}
 }
@@ -2424,12 +2391,6 @@ static int musb_suspend(struct device *dev)
 
 	musb_save_context(musb);
 
-	if (musb->clock) {
-		if (musb->set_clock)
-			musb->set_clock(musb->clock, 0);
-		else
-			clk_disable(musb->clock);
-	}
 	spin_unlock_irqrestore(&musb->lock, flags);
 	return 0;
 }
@@ -2439,13 +2400,6 @@ static int musb_resume_noirq(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct musb	*musb = dev_to_musb(&pdev->dev);
 
-	if (musb->clock) {
-		if (musb->set_clock)
-			musb->set_clock(musb->clock, 1);
-		else
-			clk_enable(musb->clock);
-	}
-
 	musb_restore_context(musb);
 
 	/* for static cmos like DaVinci, register values were preserved
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index febaabcc2b3..d0c236f8e19 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -222,7 +222,7 @@ enum musb_g_ep0_state {
 #endif
 
 /* TUSB mapping: "flat" plus ep0 special cases */
-#if	defined(CONFIG_USB_TUSB6010)
+#if	defined(CONFIG_USB_MUSB_TUSB6010)
 #define musb_ep_select(_mbase, _epnum) \
 	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
 #define	MUSB_EP_OFFSET			MUSB_TUSB_OFFSET
@@ -253,6 +253,29 @@ enum musb_g_ep0_state {
 
 /******************************** TYPES *************************************/
 
+/**
+ * struct musb_platform_ops - Operations passed to musb_core by HW glue layer
+ * @init:	turns on clocks, sets up platform-specific registers, etc
+ * @exit:	undoes @init
+ * @set_mode:	forcefully changes operating mode
+ * @try_ilde:	tries to idle the IP
+ * @vbus_status: returns vbus status if possible
+ * @set_vbus:	forces vbus status
+ */
+struct musb_platform_ops {
+	int	(*init)(struct musb *musb);
+	int	(*exit)(struct musb *musb);
+
+	void	(*enable)(struct musb *musb);
+	void	(*disable)(struct musb *musb);
+
+	int	(*set_mode)(struct musb *musb, u8 mode);
+	void	(*try_idle)(struct musb *musb, unsigned long timeout);
+
+	int	(*vbus_status)(struct musb *musb);
+	void	(*set_vbus)(struct musb *musb, int on);
+};
+
 /*
  * struct musb_hw_ep - endpoint hardware (bidirectional)
  *
@@ -263,7 +286,7 @@ struct musb_hw_ep {
 	void __iomem		*fifo;
 	void __iomem		*regs;
 
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 	void __iomem		*conf;
 #endif
 
@@ -280,7 +303,7 @@ struct musb_hw_ep {
 	struct dma_channel	*tx_channel;
 	struct dma_channel	*rx_channel;
 
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 	/* TUSB has "asynchronous" and "synchronous" dma modes */
 	dma_addr_t		fifo_async;
 	dma_addr_t		fifo_sync;
@@ -323,14 +346,43 @@ static inline struct usb_request *next_out_request(struct musb_hw_ep *hw_ep)
 #endif
 }
 
+struct musb_csr_regs {
+	/* FIFO registers */
+	u16 txmaxp, txcsr, rxmaxp, rxcsr;
+	u16 rxfifoadd, txfifoadd;
+	u8 txtype, txinterval, rxtype, rxinterval;
+	u8 rxfifosz, txfifosz;
+	u8 txfunaddr, txhubaddr, txhubport;
+	u8 rxfunaddr, rxhubaddr, rxhubport;
+};
+
+struct musb_context_registers {
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+    defined(CONFIG_ARCH_OMAP4)
+	u32 otg_sysconfig, otg_forcestandby;
+#endif
+	u8 power;
+	u16 intrtxe, intrrxe;
+	u8 intrusbe;
+	u16 frame;
+	u8 index, testmode;
+
+	u8 devctl, busctl, misc;
+
+	struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
+};
+
 /*
  * struct musb - Driver instance data.
  */
 struct musb {
 	/* device lock */
 	spinlock_t		lock;
-	struct clk		*clock;
-	struct clk		*phy_clock;
+
+	const struct musb_platform_ops *ops;
+	struct musb_context_registers context;
+
 	irqreturn_t		(*isr)(int, void *);
 	struct work_struct	irq_work;
 	u16			hwvers;
@@ -359,11 +411,7 @@ struct musb {
 
 	struct timer_list	otg_timer;
 #endif
-
-	/* called with IRQs blocked; ON/nonzero implies starting a session,
-	 * and waiting at least a_wait_vrise_tmout.
-	 */
-	void			(*board_set_vbus)(struct musb *, int is_on);
+	struct notifier_block	nb;
 
 	struct dma_controller	*dma_controller;
 
@@ -371,7 +419,7 @@ struct musb {
 	void __iomem		*ctrl_base;
 	void __iomem		*mregs;
 
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 	dma_addr_t		async;
 	dma_addr_t		sync;
 	void __iomem		*sync_va;
@@ -398,8 +446,6 @@ struct musb {
 	u8 board_mode;		/* enum musb_mode */
 	int			(*board_set_power)(int state);
 
-	int			(*set_clock)(struct clk *clk, int is_active);
-
 	u8			min_power;	/* vbus for periph, in mA/2 */
 
 	bool			is_host;
@@ -458,52 +504,6 @@ struct musb {
 #endif
 };
 
-#ifdef CONFIG_PM
-struct musb_csr_regs {
-	/* FIFO registers */
-	u16 txmaxp, txcsr, rxmaxp, rxcsr;
-	u16 rxfifoadd, txfifoadd;
-	u8 txtype, txinterval, rxtype, rxinterval;
-	u8 rxfifosz, txfifosz;
-	u8 txfunaddr, txhubaddr, txhubport;
-	u8 rxfunaddr, rxhubaddr, rxhubport;
-};
-
-struct musb_context_registers {
-
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
-    defined(CONFIG_ARCH_OMAP4)
-	u32 otg_sysconfig, otg_forcestandby;
-#endif
-	u8 power;
-	u16 intrtxe, intrrxe;
-	u8 intrusbe;
-	u16 frame;
-	u8 index, testmode;
-
-	u8 devctl, busctl, misc;
-
-	struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
-};
-
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
-    defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_BLACKFIN)
-extern void musb_platform_save_context(struct musb *musb,
-		struct musb_context_registers *musb_context);
-extern void musb_platform_restore_context(struct musb *musb,
-		struct musb_context_registers *musb_context);
-#else
-#define musb_platform_save_context(m, x)	do {} while (0)
-#define musb_platform_restore_context(m, x)	do {} while (0)
-#endif
-
-#endif
-
-static inline void musb_set_vbus(struct musb *musb, int is_on)
-{
-	musb->board_set_vbus(musb, is_on);
-}
-
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
 static inline struct musb *gadget_to_musb(struct usb_gadget *g)
 {
@@ -592,29 +592,63 @@ extern void musb_load_testpacket(struct musb *);
 
 extern irqreturn_t musb_interrupt(struct musb *);
 
-extern void musb_platform_enable(struct musb *musb);
-extern void musb_platform_disable(struct musb *musb);
-
 extern void musb_hnp_stop(struct musb *musb);
 
-extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);
+static inline void musb_platform_set_vbus(struct musb *musb, int is_on)
+{
+	if (musb->ops->set_vbus)
+		musb->ops->set_vbus(musb, is_on);
+}
 
-#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \
-	defined(CONFIG_ARCH_DAVINCI_DA8XX) || \
-	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
-	defined(CONFIG_ARCH_OMAP4)
-extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
-#else
-#define musb_platform_try_idle(x, y)		do {} while (0)
-#endif
+static inline void musb_platform_enable(struct musb *musb)
+{
+	if (musb->ops->enable)
+		musb->ops->enable(musb);
+}
 
-#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN)
-extern int musb_platform_get_vbus_status(struct musb *musb);
-#else
-#define musb_platform_get_vbus_status(x)	0
-#endif
+static inline void musb_platform_disable(struct musb *musb)
+{
+	if (musb->ops->disable)
+		musb->ops->disable(musb);
+}
+
+static inline int musb_platform_set_mode(struct musb *musb, u8 mode)
+{
+	if (!musb->ops->set_mode)
+		return 0;
+
+	return musb->ops->set_mode(musb, mode);
+}
+
+static inline void musb_platform_try_idle(struct musb *musb,
+		unsigned long timeout)
+{
+	if (musb->ops->try_idle)
+		musb->ops->try_idle(musb, timeout);
+}
+
+static inline int musb_platform_get_vbus_status(struct musb *musb)
+{
+	if (!musb->ops->vbus_status)
+		return 0;
 
-extern int __init musb_platform_init(struct musb *musb, void *board_data);
-extern int musb_platform_exit(struct musb *musb);
+	return musb->ops->vbus_status(musb);
+}
+
+static inline int musb_platform_init(struct musb *musb)
+{
+	if (!musb->ops->init)
+		return -EINVAL;
+
+	return musb->ops->init(musb);
+}
+
+static inline int musb_platform_exit(struct musb *musb)
+{
+	if (!musb->ops->exit)
+		return -EINVAL;
+
+	return musb->ops->exit(musb);
+}
 
 #endif	/* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 36cfd060dbe..9b162dfaa4f 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -92,6 +92,59 @@
 
 /* ----------------------------------------------------------------------- */
 
+/* Maps the buffer to dma  */
+
+static inline void map_dma_buffer(struct musb_request *request,
+				struct musb *musb)
+{
+	if (request->request.dma == DMA_ADDR_INVALID) {
+		request->request.dma = dma_map_single(
+				musb->controller,
+				request->request.buf,
+				request->request.length,
+				request->tx
+					? DMA_TO_DEVICE
+					: DMA_FROM_DEVICE);
+		request->mapped = 1;
+	} else {
+		dma_sync_single_for_device(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+		request->mapped = 0;
+	}
+}
+
+/* Unmap the buffer from dma and maps it back to cpu */
+static inline void unmap_dma_buffer(struct musb_request *request,
+				struct musb *musb)
+{
+	if (request->request.dma == DMA_ADDR_INVALID) {
+		DBG(20, "not unmapping a never mapped buffer\n");
+		return;
+	}
+	if (request->mapped) {
+		dma_unmap_single(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+		request->request.dma = DMA_ADDR_INVALID;
+		request->mapped = 0;
+	} else {
+		dma_sync_single_for_cpu(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+
+	}
+}
+
 /*
  * Immediately complete a request.
  *
@@ -119,24 +172,8 @@ __acquires(ep->musb->lock)
 
 	ep->busy = 1;
 	spin_unlock(&musb->lock);
-	if (is_dma_capable()) {
-		if (req->mapped) {
-			dma_unmap_single(musb->controller,
-					req->request.dma,
-					req->request.length,
-					req->tx
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-			req->request.dma = DMA_ADDR_INVALID;
-			req->mapped = 0;
-		} else if (req->request.dma != DMA_ADDR_INVALID)
-			dma_sync_single_for_cpu(musb->controller,
-					req->request.dma,
-					req->request.length,
-					req->tx
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-	}
+	if (is_dma_capable() && ep->dma)
+		unmap_dma_buffer(req, musb);
 	if (request->status == 0)
 		DBG(5, "%s done request %p,  %d/%d\n",
 				ep->end_point.name, request,
@@ -395,6 +432,13 @@ static void txstate(struct musb *musb, struct musb_request *req)
 #endif
 
 	if (!use_dma) {
+		/*
+		 * Unmap the dma buffer back to cpu if dma channel
+		 * programming fails
+		 */
+		if (is_dma_capable() && musb_ep->dma)
+			unmap_dma_buffer(req, musb);
+
 		musb_write_fifo(musb_ep->hw_ep, fifo_count,
 				(u8 *) (request->buf + request->actual));
 		request->actual += fifo_count;
@@ -713,6 +757,21 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 					return;
 			}
 #endif
+			/*
+			 * Unmap the dma buffer back to cpu if dma channel
+			 * programming fails. This buffer is mapped if the
+			 * channel allocation is successful
+			 */
+			 if (is_dma_capable() && musb_ep->dma) {
+				unmap_dma_buffer(req, musb);
+
+				/*
+				 * Clear DMAENAB and AUTOCLEAR for the
+				 * PIO mode transfer
+				 */
+				csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR);
+				musb_writew(epio, MUSB_RXCSR, csr);
+			}
 
 			musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
 					(request->buf + request->actual));
@@ -837,7 +896,9 @@ void musb_g_rx(struct musb *musb, u8 epnum)
 		if (!request)
 			return;
 	}
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
 exit:
+#endif
 	/* Analyze request */
 	rxstate(musb, to_musb_request(request));
 }
@@ -1075,13 +1136,16 @@ struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 	struct musb_request	*request = NULL;
 
 	request = kzalloc(sizeof *request, gfp_flags);
-	if (request) {
-		INIT_LIST_HEAD(&request->request.list);
-		request->request.dma = DMA_ADDR_INVALID;
-		request->epnum = musb_ep->current_epnum;
-		request->ep = musb_ep;
+	if (!request) {
+		DBG(4, "not enough memory\n");
+		return NULL;
 	}
 
+	INIT_LIST_HEAD(&request->request.list);
+	request->request.dma = DMA_ADDR_INVALID;
+	request->epnum = musb_ep->current_epnum;
+	request->ep = musb_ep;
+
 	return &request->request;
 }
 
@@ -1150,26 +1214,9 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 	request->epnum = musb_ep->current_epnum;
 	request->tx = musb_ep->is_in;
 
-	if (is_dma_capable() && musb_ep->dma) {
-		if (request->request.dma == DMA_ADDR_INVALID) {
-			request->request.dma = dma_map_single(
-					musb->controller,
-					request->request.buf,
-					request->request.length,
-					request->tx
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-			request->mapped = 1;
-		} else {
-			dma_sync_single_for_device(musb->controller,
-					request->request.dma,
-					request->request.length,
-					request->tx
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-			request->mapped = 0;
-		}
-	} else
+	if (is_dma_capable() && musb_ep->dma)
+		map_dma_buffer(request, musb);
+	else
 		request->mapped = 0;
 
 	spin_lock_irqsave(&musb->lock, lockflags);
@@ -1789,6 +1836,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 		spin_unlock_irqrestore(&musb->lock, flags);
 
 		if (is_otg_enabled(musb)) {
+			struct usb_hcd	*hcd = musb_to_hcd(musb);
+
 			DBG(3, "OTG startup...\n");
 
 			/* REVISIT:  funcall to other code, which also
@@ -1803,6 +1852,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 				musb->gadget_driver = NULL;
 				musb->g.dev.driver = NULL;
 				spin_unlock_irqrestore(&musb->lock, flags);
+			} else {
+				hcd->self.uses_pio_for_control = 1;
 			}
 		}
 	}
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index b06e9ef00cf..03c6ccdbb3b 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -74,7 +74,7 @@ static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
 	{ __raw_writel(data, addr + offset); }
 
 
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 
 /*
  * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
@@ -114,7 +114,7 @@ static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
 static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
 	{ __raw_writeb(data, addr + offset); }
 
-#endif	/* CONFIG_USB_TUSB6010 */
+#endif	/* CONFIG_USB_MUSB_TUSB6010 */
 
 #else
 
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 5a727c5b867..82410703dcd 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -234,7 +234,7 @@
 #define MUSB_TESTMODE		0x0F	/* 8 bit */
 
 /* Get offset for a given FIFO from musb->mregs */
-#ifdef	CONFIG_USB_TUSB6010
+#ifdef	CONFIG_USB_MUSB_TUSB6010
 #define MUSB_FIFO_OFFSET(epnum)	(0x200 + ((epnum) * 0x20))
 #else
 #define MUSB_FIFO_OFFSET(epnum)	(0x20 + ((epnum) * 4))
@@ -295,7 +295,7 @@
 #define MUSB_FLAT_OFFSET(_epnum, _offset)	\
 	(0x100 + (0x10*(_epnum)) + (_offset))
 
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 /* TUSB6010 EP0 configuration register is special */
 #define MUSB_TUSB_OFFSET(_epnum, _offset)	\
 	(0x10 + _offset)
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 43233c397b6..b46d1877e28 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -276,7 +276,7 @@ int musb_hub_control(
 			break;
 		case USB_PORT_FEAT_POWER:
 			if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
-				musb_set_vbus(musb, 0);
+				musb_platform_set_vbus(musb, 0);
 			break;
 		case USB_PORT_FEAT_C_CONNECTION:
 		case USB_PORT_FEAT_C_ENABLE:
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 563114d613d..0144a2d481f 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -377,7 +377,7 @@ dma_controller_create(struct musb *musb, void __iomem *base)
 	struct musb_dma_controller *controller;
 	struct device *dev = musb->controller;
 	struct platform_device *pdev = to_platform_device(dev);
-	int irq = platform_get_irq(pdev, 1);
+	int irq = platform_get_irq_byname(pdev, "dma");
 
 	if (irq == 0) {
 		dev_err(dev, "No DMA interrupt line!\n");
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index ed618bde1ee..a3f12333fc4 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -31,10 +31,18 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include "musb_core.h"
 #include "omap2430.h"
 
+struct omap2430_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct clk		*clk;
+};
+#define glue_to_musb(g)		platform_get_drvdata(g->musb)
 
 static struct timer_list musb_idle_timer;
 
@@ -49,12 +57,8 @@ static void musb_do_idle(unsigned long _musb)
 
 	spin_lock_irqsave(&musb->lock, flags);
 
-	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-
 	switch (musb->xceiv->state) {
 	case OTG_STATE_A_WAIT_BCON:
-		devctl &= ~MUSB_DEVCTL_SESSION;
-		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
 		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 		if (devctl & MUSB_DEVCTL_BDEVICE) {
@@ -98,7 +102,7 @@ static void musb_do_idle(unsigned long _musb)
 }
 
 
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
 {
 	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
 	static unsigned long	last_timer;
@@ -131,15 +135,11 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 	mod_timer(&musb_idle_timer, timeout);
 }
 
-void musb_platform_enable(struct musb *musb)
-{
-}
-void musb_platform_disable(struct musb *musb)
-{
-}
-static void omap_set_vbus(struct musb *musb, int is_on)
+static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
 {
 	u8		devctl;
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+	int ret = 1;
 	/* HDRC controls CPEN, but beware current surges during device
 	 * connect.  They can trigger transient overcurrent conditions
 	 * that must be ignored.
@@ -148,12 +148,35 @@ static void omap_set_vbus(struct musb *musb, int is_on)
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
 	if (is_on) {
-		musb->is_active = 1;
-		musb->xceiv->default_a = 1;
-		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
-		devctl |= MUSB_DEVCTL_SESSION;
-
-		MUSB_HST_MODE(musb);
+		if (musb->xceiv->state == OTG_STATE_A_IDLE) {
+			/* start the session */
+			devctl |= MUSB_DEVCTL_SESSION;
+			musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+			/*
+			 * Wait for the musb to set as A device to enable the
+			 * VBUS
+			 */
+			while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
+
+				cpu_relax();
+
+				if (time_after(jiffies, timeout)) {
+					dev_err(musb->controller,
+					"configured as A device timeout");
+					ret = -EINVAL;
+					break;
+				}
+			}
+
+			if (ret && musb->xceiv->set_vbus)
+				otg_set_vbus(musb->xceiv, 1);
+		} else {
+			musb->is_active = 1;
+			musb->xceiv->default_a = 1;
+			musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+			devctl |= MUSB_DEVCTL_SESSION;
+			MUSB_HST_MODE(musb);
+		}
 	} else {
 		musb->is_active = 0;
 
@@ -175,9 +198,7 @@ static void omap_set_vbus(struct musb *musb, int is_on)
 		musb_readb(musb->mregs, MUSB_DEVCTL));
 }
 
-static int musb_platform_resume(struct musb *musb);
-
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
 	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
@@ -187,10 +208,94 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
 	return 0;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static inline void omap2430_low_level_exit(struct musb *musb)
 {
 	u32 l;
-	struct omap_musb_board_data *data = board_data;
+
+	/* in any role */
+	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
+	l |= ENABLEFORCE;	/* enable MSTANDBY */
+	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+
+	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
+	l |= ENABLEWAKEUP;	/* enable wakeup */
+	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+}
+
+static inline void omap2430_low_level_init(struct musb *musb)
+{
+	u32 l;
+
+	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
+	l &= ~ENABLEWAKEUP;	/* disable wakeup */
+	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+
+	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
+	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
+	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+}
+
+/* blocking notifier support */
+static int musb_otg_notifications(struct notifier_block *nb,
+		unsigned long event, void *unused)
+{
+	struct musb	*musb = container_of(nb, struct musb, nb);
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *pdata = dev->platform_data;
+	struct omap_musb_board_data *data = pdata->board_data;
+
+	switch (event) {
+	case USB_EVENT_ID:
+		DBG(4, "ID GND\n");
+
+		if (is_otg_enabled(musb)) {
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+			if (musb->gadget_driver) {
+				otg_init(musb->xceiv);
+
+				if (data->interface_type ==
+						MUSB_INTERFACE_UTMI)
+					omap2430_musb_set_vbus(musb, 1);
+
+			}
+#endif
+		} else {
+			otg_init(musb->xceiv);
+			if (data->interface_type ==
+					MUSB_INTERFACE_UTMI)
+				omap2430_musb_set_vbus(musb, 1);
+		}
+		break;
+
+	case USB_EVENT_VBUS:
+		DBG(4, "VBUS Connect\n");
+
+		otg_init(musb->xceiv);
+		break;
+
+	case USB_EVENT_NONE:
+		DBG(4, "VBUS Disconnect\n");
+
+		if (data->interface_type == MUSB_INTERFACE_UTMI) {
+			if (musb->xceiv->set_vbus)
+				otg_set_vbus(musb->xceiv, 0);
+		}
+		otg_shutdown(musb->xceiv);
+		break;
+	default:
+		DBG(4, "ID float\n");
+		return NOTIFY_DONE;
+	}
+
+	return NOTIFY_OK;
+}
+
+static int omap2430_musb_init(struct musb *musb)
+{
+	u32 l, status = 0;
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
 
 	/* We require some kind of external transceiver, hooked
 	 * up through ULPI.  TWL4030-family PMICs include one,
@@ -202,7 +307,7 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 		return -ENODEV;
 	}
 
-	musb_platform_resume(musb);
+	omap2430_low_level_init(musb);
 
 	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
 	l &= ~ENABLEWAKEUP;	/* disable wakeup */
@@ -239,87 +344,214 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 			musb_readl(musb->mregs, OTG_INTERFSEL),
 			musb_readl(musb->mregs, OTG_SIMENABLE));
 
-	if (is_host_enabled(musb))
-		musb->board_set_vbus = omap_set_vbus;
+	musb->nb.notifier_call = musb_otg_notifications;
+	status = otg_register_notifier(musb->xceiv, &musb->nb);
+
+	if (status)
+		DBG(1, "notification register failed\n");
+
+	/* check whether cable is already connected */
+	if (musb->xceiv->state ==OTG_STATE_B_IDLE)
+		musb_otg_notifications(&musb->nb, 1,
+					musb->xceiv->gadget);
 
 	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
 
 	return 0;
 }
 
-#ifdef CONFIG_PM
-void musb_platform_save_context(struct musb *musb,
-		struct musb_context_registers *musb_context)
+static int omap2430_musb_exit(struct musb *musb)
 {
-	musb_context->otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG);
-	musb_context->otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY);
-}
 
-void musb_platform_restore_context(struct musb *musb,
-		struct musb_context_registers *musb_context)
-{
-	musb_writel(musb->mregs, OTG_SYSCONFIG, musb_context->otg_sysconfig);
-	musb_writel(musb->mregs, OTG_FORCESTDBY, musb_context->otg_forcestandby);
+	omap2430_low_level_exit(musb);
+	otg_put_transceiver(musb->xceiv);
+
+	return 0;
 }
-#endif
 
-static int musb_platform_suspend(struct musb *musb)
+static const struct musb_platform_ops omap2430_ops = {
+	.init		= omap2430_musb_init,
+	.exit		= omap2430_musb_exit,
+
+	.set_mode	= omap2430_musb_set_mode,
+	.try_idle	= omap2430_musb_try_idle,
+
+	.set_vbus	= omap2430_musb_set_vbus,
+};
+
+static u64 omap2430_dmamask = DMA_BIT_MASK(32);
+
+static int __init omap2430_probe(struct platform_device *pdev)
 {
-	u32 l;
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct omap2430_glue		*glue;
+	struct clk			*clk;
 
-	if (!musb->clock)
-		return 0;
+	int				ret = -ENOMEM;
 
-	/* in any role */
-	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
-	l |= ENABLEFORCE;	/* enable MSTANDBY */
-	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
 
-	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
-	l |= ENABLEWAKEUP;	/* enable wakeup */
-	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
 
-	otg_set_suspend(musb->xceiv, 1);
+	clk = clk_get(&pdev->dev, "ick");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err2;
+	}
 
-	if (musb->set_clock)
-		musb->set_clock(musb->clock, 0);
-	else
-		clk_disable(musb->clock);
+	ret = clk_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err3;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &omap2430_dmamask;
+	musb->dev.coherent_dma_mask	= omap2430_dmamask;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->clk			= clk;
+
+	pdata->platform_ops		= &omap2430_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err4;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err4;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err4;
+	}
 
 	return 0;
+
+err4:
+	clk_disable(clk);
+
+err3:
+	clk_put(clk);
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
 }
 
-static int musb_platform_resume(struct musb *musb)
+static int __exit omap2430_remove(struct platform_device *pdev)
 {
-	u32 l;
+	struct omap2430_glue		*glue = platform_get_drvdata(pdev);
 
-	if (!musb->clock)
-		return 0;
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+	clk_disable(glue->clk);
+	clk_put(glue->clk);
+	kfree(glue);
 
-	otg_set_suspend(musb->xceiv, 0);
+	return 0;
+}
 
-	if (musb->set_clock)
-		musb->set_clock(musb->clock, 1);
-	else
-		clk_enable(musb->clock);
+#ifdef CONFIG_PM
+static void omap2430_save_context(struct musb *musb)
+{
+	musb->context.otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG);
+	musb->context.otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY);
+}
 
-	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
-	l &= ~ENABLEWAKEUP;	/* disable wakeup */
-	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+static void omap2430_restore_context(struct musb *musb)
+{
+	musb_writel(musb->mregs, OTG_SYSCONFIG, musb->context.otg_sysconfig);
+	musb_writel(musb->mregs, OTG_FORCESTDBY, musb->context.otg_forcestandby);
+}
 
-	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
-	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
-	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+static int omap2430_suspend(struct device *dev)
+{
+	struct omap2430_glue		*glue = dev_get_drvdata(dev);
+	struct musb			*musb = glue_to_musb(glue);
+
+	omap2430_low_level_exit(musb);
+	otg_set_suspend(musb->xceiv, 1);
+	omap2430_save_context(musb);
+	clk_disable(glue->clk);
 
 	return 0;
 }
 
-
-int musb_platform_exit(struct musb *musb)
+static int omap2430_resume(struct device *dev)
 {
+	struct omap2430_glue		*glue = dev_get_drvdata(dev);
+	struct musb			*musb = glue_to_musb(glue);
+	int				ret;
+
+	ret = clk_enable(glue->clk);
+	if (ret) {
+		dev_err(dev, "faled to enable clock\n");
+		return ret;
+	}
 
-	musb_platform_suspend(musb);
+	omap2430_low_level_init(musb);
+	omap2430_restore_context(musb);
+	otg_set_suspend(musb->xceiv, 0);
 
-	otg_put_transceiver(musb->xceiv);
 	return 0;
 }
+
+static struct dev_pm_ops omap2430_pm_ops = {
+	.suspend	= omap2430_suspend,
+	.resume		= omap2430_resume,
+};
+
+#define DEV_PM_OPS	(&omap2430_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static struct platform_driver omap2430_driver = {
+	.remove		= __exit_p(omap2430_remove),
+	.driver		= {
+		.name	= "musb-omap2430",
+		.pm	= DEV_PM_OPS,
+	},
+};
+
+MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init omap2430_init(void)
+{
+	return platform_driver_probe(&omap2430_driver, omap2430_probe);
+}
+subsys_initcall(omap2430_init);
+
+static void __exit omap2430_exit(void)
+{
+	platform_driver_unregister(&omap2430_driver);
+}
+module_exit(omap2430_exit);
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index bde40efc704..2ba3b070ed0 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -21,10 +21,16 @@
 #include <linux/usb.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include "musb_core.h"
 
-static void tusb_source_power(struct musb *musb, int is_on);
+struct tusb6010_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+};
+
+static void tusb_musb_set_vbus(struct musb *musb, int is_on);
 
 #define TUSB_REV_MAJOR(reg_val)		((reg_val >> 4) & 0xf)
 #define TUSB_REV_MINOR(reg_val)		(reg_val & 0xf)
@@ -50,7 +56,7 @@ u8 tusb_get_revision(struct musb *musb)
 	return rev;
 }
 
-static int __init tusb_print_revision(struct musb *musb)
+static int tusb_print_revision(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	u8		rev;
@@ -275,17 +281,6 @@ static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
 	void __iomem	*tbase = musb->ctrl_base;
 	u32		reg;
 
-	/*
-	 * Keep clock active when enabled. Note that this is not tied to
-	 * drawing VBUS, as with OTG mA can be less than musb->min_power.
-	 */
-	if (musb->set_clock) {
-		if (mA)
-			musb->set_clock(musb->clock, 1);
-		else
-			musb->set_clock(musb->clock, 0);
-	}
-
 	/* tps65030 seems to consume max 100mA, with maybe 60mA available
 	 * (measured on one board) for things other than tps and tusb.
 	 *
@@ -348,7 +343,7 @@ static void tusb_set_clock_source(struct musb *musb, unsigned mode)
  * USB link is not suspended ... and tells us the relevant wakeup
  * events.  SW_EN for voltage is handled separately.
  */
-void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
+static void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	u32		reg;
@@ -385,7 +380,7 @@ void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
 /*
  * Updates cable VBUS status. Caller must take care of locking.
  */
-int musb_platform_get_vbus_status(struct musb *musb)
+static int tusb_musb_vbus_status(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	u32		otg_stat, prcm_mngmt;
@@ -431,7 +426,7 @@ static void musb_do_idle(unsigned long _musb)
 		}
 		/* FALLTHROUGH */
 	case OTG_STATE_A_IDLE:
-		tusb_source_power(musb, 0);
+		tusb_musb_set_vbus(musb, 0);
 	default:
 		break;
 	}
@@ -475,7 +470,7 @@ done:
  * we don't want to treat that full speed J as a wakeup event.
  * ... peripherals must draw only suspend current after 10 msec.
  */
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout)
 {
 	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
 	static unsigned long	last_timer;
@@ -515,7 +510,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 				| TUSB_DEV_OTG_TIMER_ENABLE) \
 		: 0)
 
-static void tusb_source_power(struct musb *musb, int is_on)
+static void tusb_musb_set_vbus(struct musb *musb, int is_on)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	u32		conf, prcm, timer;
@@ -531,8 +526,6 @@ static void tusb_source_power(struct musb *musb, int is_on)
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
 	if (is_on) {
-		if (musb->set_clock)
-			musb->set_clock(musb->clock, 1);
 		timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
 		musb->xceiv->default_a = 1;
 		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
@@ -571,8 +564,6 @@ static void tusb_source_power(struct musb *musb, int is_on)
 
 		devctl &= ~MUSB_DEVCTL_SESSION;
 		conf &= ~TUSB_DEV_CONF_USB_HOST_MODE;
-		if (musb->set_clock)
-			musb->set_clock(musb->clock, 0);
 	}
 	prcm &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
 
@@ -599,7 +590,7 @@ static void tusb_source_power(struct musb *musb, int is_on)
  * and peripheral modes in non-OTG configurations by reconfiguring hardware
  * and then setting musb->board_mode. For now, only support OTG mode.
  */
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int tusb_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	u32		otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf;
@@ -677,7 +668,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 			default_a = is_host_enabled(musb);
 		DBG(2, "Default-%c\n", default_a ? 'A' : 'B');
 		musb->xceiv->default_a = default_a;
-		tusb_source_power(musb, default_a);
+		tusb_musb_set_vbus(musb, default_a);
 
 		/* Don't allow idling immediately */
 		if (default_a)
@@ -722,7 +713,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 			switch (musb->xceiv->state) {
 			case OTG_STATE_A_IDLE:
 				DBG(2, "Got SRP, turning on VBUS\n");
-				musb_set_vbus(musb, 1);
+				musb_platform_set_vbus(musb, 1);
 
 				/* CONNECT can wake if a_wait_bcon is set */
 				if (musb->a_wait_bcon != 0)
@@ -748,11 +739,11 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 				 */
 				if (musb->vbuserr_retry) {
 					musb->vbuserr_retry--;
-					tusb_source_power(musb, 1);
+					tusb_musb_set_vbus(musb, 1);
 				} else {
 					musb->vbuserr_retry
 						= VBUSERR_RETRY_COUNT;
-					tusb_source_power(musb, 0);
+					tusb_musb_set_vbus(musb, 0);
 				}
 				break;
 			default:
@@ -786,7 +777,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 			} else {
 				/* REVISIT report overcurrent to hub? */
 				ERR("vbus too slow, devctl %02x\n", devctl);
-				tusb_source_power(musb, 0);
+				tusb_musb_set_vbus(musb, 0);
 			}
 			break;
 		case OTG_STATE_A_WAIT_BCON:
@@ -807,7 +798,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 	return idle_timeout;
 }
 
-static irqreturn_t tusb_interrupt(int irq, void *__hci)
+static irqreturn_t tusb_musb_interrupt(int irq, void *__hci)
 {
 	struct musb	*musb = __hci;
 	void __iomem	*tbase = musb->ctrl_base;
@@ -911,7 +902,7 @@ static irqreturn_t tusb_interrupt(int irq, void *__hci)
 	musb_writel(tbase, TUSB_INT_SRC_CLEAR,
 		int_src & ~TUSB_INT_MASK_RESERVED_BITS);
 
-	musb_platform_try_idle(musb, idle_timeout);
+	tusb_musb_try_idle(musb, idle_timeout);
 
 	musb_writel(tbase, TUSB_INT_MASK, int_mask);
 	spin_unlock_irqrestore(&musb->lock, flags);
@@ -926,7 +917,7 @@ static int dma_off;
  * REVISIT:
  * - Check what is unnecessary in MGC_HdrcStart()
  */
-void musb_platform_enable(struct musb *musb)
+static void tusb_musb_enable(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 
@@ -970,7 +961,7 @@ void musb_platform_enable(struct musb *musb)
 /*
  * Disables TUSB6010. Caller must take care of locking.
  */
-void musb_platform_disable(struct musb *musb)
+static void tusb_musb_disable(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 
@@ -995,7 +986,7 @@ void musb_platform_disable(struct musb *musb)
  * Sets up TUSB6010 CPU interface specific signals and registers
  * Note: Settings optimized for OMAP24xx
  */
-static void __init tusb_setup_cpu_interface(struct musb *musb)
+static void tusb_setup_cpu_interface(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 
@@ -1022,7 +1013,7 @@ static void __init tusb_setup_cpu_interface(struct musb *musb)
 	musb_writel(tbase, TUSB_WAIT_COUNT, 1);
 }
 
-static int __init tusb_start(struct musb *musb)
+static int tusb_musb_start(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	int		ret = 0;
@@ -1091,7 +1082,7 @@ err:
 	return -ENODEV;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static int tusb_musb_init(struct musb *musb)
 {
 	struct platform_device	*pdev;
 	struct resource		*mem;
@@ -1131,16 +1122,14 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 	 */
 	musb->mregs += TUSB_BASE_OFFSET;
 
-	ret = tusb_start(musb);
+	ret = tusb_musb_start(musb);
 	if (ret) {
 		printk(KERN_ERR "Could not start tusb6010 (%d)\n",
 				ret);
 		goto done;
 	}
-	musb->isr = tusb_interrupt;
+	musb->isr = tusb_musb_interrupt;
 
-	if (is_host_enabled(musb))
-		musb->board_set_vbus = tusb_source_power;
 	if (is_peripheral_enabled(musb)) {
 		musb->xceiv->set_power = tusb_draw_power;
 		the_musb = musb;
@@ -1159,7 +1148,7 @@ done:
 	return ret;
 }
 
-int musb_platform_exit(struct musb *musb)
+static int tusb_musb_exit(struct musb *musb)
 {
 	del_timer_sync(&musb_idle_timer);
 	the_musb = NULL;
@@ -1173,3 +1162,115 @@ int musb_platform_exit(struct musb *musb)
 	usb_nop_xceiv_unregister();
 	return 0;
 }
+
+static const struct musb_platform_ops tusb_ops = {
+	.init		= tusb_musb_init,
+	.exit		= tusb_musb_exit,
+
+	.enable		= tusb_musb_enable,
+	.disable	= tusb_musb_disable,
+
+	.set_mode	= tusb_musb_set_mode,
+	.try_idle	= tusb_musb_try_idle,
+
+	.vbus_status	= tusb_musb_vbus_status,
+	.set_vbus	= tusb_musb_set_vbus,
+};
+
+static u64 tusb_dmamask = DMA_BIT_MASK(32);
+
+static int __init tusb_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct tusb6010_glue		*glue;
+
+	int				ret = -ENOMEM;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
+
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &tusb_dmamask;
+	musb->dev.coherent_dma_mask	= tusb_dmamask;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+
+	pdata->platform_ops		= &tusb_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err2;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err2;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err1;
+	}
+
+	return 0;
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
+}
+
+static int __exit tusb_remove(struct platform_device *pdev)
+{
+	struct tusb6010_glue		*glue = platform_get_drvdata(pdev);
+
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+	kfree(glue);
+
+	return 0;
+}
+
+static struct platform_driver tusb_driver = {
+	.remove		= __exit_p(tusb_remove),
+	.driver		= {
+		.name	= "musb-tusb",
+	},
+};
+
+MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init tusb_init(void)
+{
+	return platform_driver_probe(&tusb_driver, tusb_probe);
+}
+subsys_initcall(tusb_init);
+
+static void __exit tusb_exit(void)
+{
+	platform_driver_unregister(&tusb_driver);
+}
+module_exit(tusb_exit);
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
new file mode 100644
index 00000000000..d6384e4aeef
--- /dev/null
+++ b/drivers/usb/musb/ux500.c
@@ -0,0 +1,216 @@
+/*
+ * Copyright (C) 2010 ST-Ericsson AB
+ * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ *
+ * Based on omap2430.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include "musb_core.h"
+
+struct ux500_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct clk		*clk;
+};
+#define glue_to_musb(g)	platform_get_drvdata(g->musb)
+
+static int ux500_musb_init(struct musb *musb)
+{
+	musb->xceiv = otg_get_transceiver();
+	if (!musb->xceiv) {
+		pr_err("HS USB OTG: no transceiver configured\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int ux500_musb_exit(struct musb *musb)
+{
+	otg_put_transceiver(musb->xceiv);
+
+	return 0;
+}
+
+static const struct musb_platform_ops ux500_ops = {
+	.init		= ux500_musb_init,
+	.exit		= ux500_musb_exit,
+};
+
+static int __init ux500_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct ux500_glue		*glue;
+	struct clk			*clk;
+
+	int				ret = -ENOMEM;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
+
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
+
+	clk = clk_get(&pdev->dev, "usb");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err2;
+	}
+
+	ret = clk_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err3;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->clk			= clk;
+
+	pdata->platform_ops		= &ux500_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err4;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err4;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err4;
+	}
+
+	return 0;
+
+err4:
+	clk_disable(clk);
+
+err3:
+	clk_put(clk);
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
+}
+
+static int __exit ux500_remove(struct platform_device *pdev)
+{
+	struct ux500_glue	*glue = platform_get_drvdata(pdev);
+
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+	clk_disable(glue->clk);
+	clk_put(glue->clk);
+	kfree(glue);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ux500_suspend(struct device *dev)
+{
+	struct ux500_glue	*glue = dev_get_drvdata(dev);
+	struct musb		*musb = glue_to_musb(glue);
+
+	otg_set_suspend(musb->xceiv, 1);
+	clk_disable(glue->clk);
+
+	return 0;
+}
+
+static int ux500_resume(struct device *dev)
+{
+	struct ux500_glue	*glue = dev_get_drvdata(dev);
+	struct musb		*musb = glue_to_musb(glue);
+	int			ret;
+
+	ret = clk_enable(glue->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable clock\n");
+		return ret;
+	}
+
+	otg_set_suspend(musb->xceiv, 0);
+
+	return 0;
+}
+
+static const struct dev_pm_ops ux500_pm_ops = {
+	.suspend	= ux500_suspend,
+	.resume		= ux500_resume,
+};
+
+#define DEV_PM_OPS	(&ux500_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static struct platform_driver ux500_driver = {
+	.remove		= __exit_p(ux500_remove),
+	.driver		= {
+		.name	= "musb-ux500",
+		.pm	= DEV_PM_OPS,
+	},
+};
+
+MODULE_DESCRIPTION("UX500 MUSB Glue Layer");
+MODULE_AUTHOR("Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init ux500_init(void)
+{
+	return platform_driver_probe(&ux500_driver, ux500_probe);
+}
+subsys_initcall(ux500_init);
+
+static void __exit ux500_exit(void)
+{
+	platform_driver_unregister(&ux500_driver);
+}
+module_exit(ux500_exit);
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 5ce07528cd0..9fb875d5f09 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -59,6 +59,18 @@ config TWL4030_USB
 	  This transceiver supports high and full speed devices plus,
 	  in host mode, low speed.
 
+config TWL6030_USB
+	tristate "TWL6030 USB Transceiver Driver"
+	depends on TWL4030_CORE
+	select USB_OTG_UTILS
+	help
+	  Enable this to support the USB OTG transceiver on TWL6030
+	  family chips. This TWL6030 transceiver has the VBUS and ID GND
+	  and OTG SRP events capabilities. For all other transceiver functionality
+	  UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs
+	  are hooked to this driver through platform_data structure.
+	  The definition of internal PHY APIs are in the mach-omap2 layer.
+
 config NOP_USB_XCEIV
 	tristate "NOP USB Transceiver Driver"
 	select USB_OTG_UTILS
@@ -81,4 +93,24 @@ config USB_LANGWELL_OTG
 	  To compile this driver as a module, choose M here: the
 	  module will be called langwell_otg.
 
+config USB_MSM_OTG_72K
+	tristate "OTG support for Qualcomm on-chip USB controller"
+	depends on (USB || USB_GADGET) && ARCH_MSM
+	select USB_OTG_UTILS
+	help
+	  Enable this to support the USB OTG transceiver on MSM chips. It
+	  handles PHY initialization, clock management, and workarounds
+	  required after resetting the hardware and power management.
+	  This driver is required even for peripheral only or host only
+	  mode configurations.
+
+config AB8500_USB
+        tristate "AB8500 USB Transceiver Driver"
+        depends on AB8500_CORE
+        select USB_OTG_UTILS
+        help
+          Enable this to support the USB OTG transceiver in AB8500 chip.
+          This transceiver supports high and full speed devices plus,
+          in host mode, low speed.
+
 endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 66f1b83e4fa..a520e715cfd 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -12,6 +12,9 @@ obj-$(CONFIG_USB_OTG_UTILS)	+= otg.o
 obj-$(CONFIG_USB_GPIO_VBUS)	+= gpio_vbus.o
 obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
 obj-$(CONFIG_TWL4030_USB)	+= twl4030-usb.o
+obj-$(CONFIG_TWL6030_USB)	+= twl6030-usb.o
 obj-$(CONFIG_USB_LANGWELL_OTG)	+= langwell_otg.o
 obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o
 obj-$(CONFIG_USB_ULPI)		+= ulpi.o
+obj-$(CONFIG_USB_MSM_OTG_72K)	+= msm72k_otg.o
+obj-$(CONFIG_AB8500_USB)	+= ab8500-usb.o
diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/otg/ab8500-usb.c
new file mode 100644
index 00000000000..d14736b3107
--- /dev/null
+++ b/drivers/usb/otg/ab8500-usb.c
@@ -0,0 +1,585 @@
+/*
+ * drivers/usb/otg/ab8500_usb.c
+ *
+ * USB transceiver driver for AB8500 chip
+ *
+ * Copyright (C) 2010 ST-Ericsson AB
+ * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+#include <linux/slab.h>
+#include <linux/notifier.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/ab8500.h>
+
+#define AB8500_MAIN_WD_CTRL_REG 0x01
+#define AB8500_USB_LINE_STAT_REG 0x80
+#define AB8500_USB_PHY_CTRL_REG 0x8A
+
+#define AB8500_BIT_OTG_STAT_ID (1 << 0)
+#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0)
+#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1)
+#define AB8500_BIT_WD_CTRL_ENABLE (1 << 0)
+#define AB8500_BIT_WD_CTRL_KICK (1 << 1)
+
+#define AB8500_V1x_LINK_STAT_WAIT (HZ/10)
+#define AB8500_WD_KICK_DELAY_US 100 /* usec */
+#define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */
+#define AB8500_WD_V10_DISABLE_DELAY_MS 100 /* ms */
+
+/* Usb line status register */
+enum ab8500_usb_link_status {
+	USB_LINK_NOT_CONFIGURED = 0,
+	USB_LINK_STD_HOST_NC,
+	USB_LINK_STD_HOST_C_NS,
+	USB_LINK_STD_HOST_C_S,
+	USB_LINK_HOST_CHG_NM,
+	USB_LINK_HOST_CHG_HS,
+	USB_LINK_HOST_CHG_HS_CHIRP,
+	USB_LINK_DEDICATED_CHG,
+	USB_LINK_ACA_RID_A,
+	USB_LINK_ACA_RID_B,
+	USB_LINK_ACA_RID_C_NM,
+	USB_LINK_ACA_RID_C_HS,
+	USB_LINK_ACA_RID_C_HS_CHIRP,
+	USB_LINK_HM_IDGND,
+	USB_LINK_RESERVED,
+	USB_LINK_NOT_VALID_LINK
+};
+
+struct ab8500_usb {
+	struct otg_transceiver otg;
+	struct device *dev;
+	int irq_num_id_rise;
+	int irq_num_id_fall;
+	int irq_num_vbus_rise;
+	int irq_num_vbus_fall;
+	int irq_num_link_status;
+	unsigned vbus_draw;
+	struct delayed_work dwork;
+	struct work_struct phy_dis_work;
+	unsigned long link_status_wait;
+	int rev;
+};
+
+static inline struct ab8500_usb *xceiv_to_ab(struct otg_transceiver *x)
+{
+	return container_of(x, struct ab8500_usb, otg);
+}
+
+static void ab8500_usb_wd_workaround(struct ab8500_usb *ab)
+{
+	abx500_set_register_interruptible(ab->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WD_CTRL_REG,
+		AB8500_BIT_WD_CTRL_ENABLE);
+
+	udelay(AB8500_WD_KICK_DELAY_US);
+
+	abx500_set_register_interruptible(ab->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WD_CTRL_REG,
+		(AB8500_BIT_WD_CTRL_ENABLE
+		| AB8500_BIT_WD_CTRL_KICK));
+
+	if (ab->rev > 0x10) /* v1.1 v2.0 */
+		udelay(AB8500_WD_V11_DISABLE_DELAY_US);
+	else /* v1.0 */
+		msleep(AB8500_WD_V10_DISABLE_DELAY_MS);
+
+	abx500_set_register_interruptible(ab->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WD_CTRL_REG,
+		0);
+}
+
+static void ab8500_usb_phy_ctrl(struct ab8500_usb *ab, bool sel_host,
+					bool enable)
+{
+	u8 ctrl_reg;
+	abx500_get_register_interruptible(ab->dev,
+				AB8500_USB,
+				AB8500_USB_PHY_CTRL_REG,
+				&ctrl_reg);
+	if (sel_host) {
+		if (enable)
+			ctrl_reg |= AB8500_BIT_PHY_CTRL_HOST_EN;
+		else
+			ctrl_reg &= ~AB8500_BIT_PHY_CTRL_HOST_EN;
+	} else {
+		if (enable)
+			ctrl_reg |= AB8500_BIT_PHY_CTRL_DEVICE_EN;
+		else
+			ctrl_reg &= ~AB8500_BIT_PHY_CTRL_DEVICE_EN;
+	}
+
+	abx500_set_register_interruptible(ab->dev,
+				AB8500_USB,
+				AB8500_USB_PHY_CTRL_REG,
+				ctrl_reg);
+
+	/* Needed to enable the phy.*/
+	if (enable)
+		ab8500_usb_wd_workaround(ab);
+}
+
+#define ab8500_usb_host_phy_en(ab)	ab8500_usb_phy_ctrl(ab, true, true)
+#define ab8500_usb_host_phy_dis(ab)	ab8500_usb_phy_ctrl(ab, true, false)
+#define ab8500_usb_peri_phy_en(ab)	ab8500_usb_phy_ctrl(ab, false, true)
+#define ab8500_usb_peri_phy_dis(ab)	ab8500_usb_phy_ctrl(ab, false, false)
+
+static int ab8500_usb_link_status_update(struct ab8500_usb *ab)
+{
+	u8 reg;
+	enum ab8500_usb_link_status lsts;
+	void *v = NULL;
+	enum usb_xceiv_events event;
+
+	abx500_get_register_interruptible(ab->dev,
+			AB8500_USB,
+			AB8500_USB_LINE_STAT_REG,
+			&reg);
+
+	lsts = (reg >> 3) & 0x0F;
+
+	switch (lsts) {
+	case USB_LINK_NOT_CONFIGURED:
+	case USB_LINK_RESERVED:
+	case USB_LINK_NOT_VALID_LINK:
+		/* TODO: Disable regulators. */
+		ab8500_usb_host_phy_dis(ab);
+		ab8500_usb_peri_phy_dis(ab);
+		ab->otg.state = OTG_STATE_B_IDLE;
+		ab->otg.default_a = false;
+		ab->vbus_draw = 0;
+		event = USB_EVENT_NONE;
+		break;
+
+	case USB_LINK_STD_HOST_NC:
+	case USB_LINK_STD_HOST_C_NS:
+	case USB_LINK_STD_HOST_C_S:
+	case USB_LINK_HOST_CHG_NM:
+	case USB_LINK_HOST_CHG_HS:
+	case USB_LINK_HOST_CHG_HS_CHIRP:
+		if (ab->otg.gadget) {
+			/* TODO: Enable regulators. */
+			ab8500_usb_peri_phy_en(ab);
+			v = ab->otg.gadget;
+		}
+		event = USB_EVENT_VBUS;
+		break;
+
+	case USB_LINK_HM_IDGND:
+		if (ab->otg.host) {
+			/* TODO: Enable regulators. */
+			ab8500_usb_host_phy_en(ab);
+			v = ab->otg.host;
+		}
+		ab->otg.state = OTG_STATE_A_IDLE;
+		ab->otg.default_a = true;
+		event = USB_EVENT_ID;
+		break;
+
+	case USB_LINK_ACA_RID_A:
+	case USB_LINK_ACA_RID_B:
+		/* TODO */
+	case USB_LINK_ACA_RID_C_NM:
+	case USB_LINK_ACA_RID_C_HS:
+	case USB_LINK_ACA_RID_C_HS_CHIRP:
+	case USB_LINK_DEDICATED_CHG:
+		/* TODO: vbus_draw */
+		event = USB_EVENT_CHARGER;
+		break;
+	}
+
+	blocking_notifier_call_chain(&ab->otg.notifier, event, v);
+
+	return 0;
+}
+
+static void ab8500_usb_delayed_work(struct work_struct *work)
+{
+	struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
+						dwork.work);
+
+	ab8500_usb_link_status_update(ab);
+}
+
+static irqreturn_t ab8500_usb_v1x_common_irq(int irq, void *data)
+{
+	struct ab8500_usb *ab = (struct ab8500_usb *) data;
+
+	/* Wait for link status to become stable. */
+	schedule_delayed_work(&ab->dwork, ab->link_status_wait);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ab8500_usb_v1x_vbus_fall_irq(int irq, void *data)
+{
+	struct ab8500_usb *ab = (struct ab8500_usb *) data;
+
+	/* Link status will not be updated till phy is disabled. */
+	ab8500_usb_peri_phy_dis(ab);
+
+	/* Wait for link status to become stable. */
+	schedule_delayed_work(&ab->dwork, ab->link_status_wait);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ab8500_usb_v20_irq(int irq, void *data)
+{
+	struct ab8500_usb *ab = (struct ab8500_usb *) data;
+
+	ab8500_usb_link_status_update(ab);
+
+	return IRQ_HANDLED;
+}
+
+static void ab8500_usb_phy_disable_work(struct work_struct *work)
+{
+	struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
+						phy_dis_work);
+
+	if (!ab->otg.host)
+		ab8500_usb_host_phy_dis(ab);
+
+	if (!ab->otg.gadget)
+		ab8500_usb_peri_phy_dis(ab);
+}
+
+static int ab8500_usb_set_power(struct otg_transceiver *otg, unsigned mA)
+{
+	struct ab8500_usb *ab;
+
+	if (!otg)
+		return -ENODEV;
+
+	ab = xceiv_to_ab(otg);
+
+	ab->vbus_draw = mA;
+
+	if (mA)
+		blocking_notifier_call_chain(&ab->otg.notifier,
+				USB_EVENT_ENUMERATED, ab->otg.gadget);
+	return 0;
+}
+
+/* TODO: Implement some way for charging or other drivers to read
+ * ab->vbus_draw.
+ */
+
+static int ab8500_usb_set_suspend(struct otg_transceiver *x, int suspend)
+{
+	/* TODO */
+	return 0;
+}
+
+static int ab8500_usb_set_peripheral(struct otg_transceiver *otg,
+		struct usb_gadget *gadget)
+{
+	struct ab8500_usb *ab;
+
+	if (!otg)
+		return -ENODEV;
+
+	ab = xceiv_to_ab(otg);
+
+	/* Some drivers call this function in atomic context.
+	 * Do not update ab8500 registers directly till this
+	 * is fixed.
+	 */
+
+	if (!gadget) {
+		/* TODO: Disable regulators. */
+		ab->otg.gadget = NULL;
+		schedule_work(&ab->phy_dis_work);
+	} else {
+		ab->otg.gadget = gadget;
+		ab->otg.state = OTG_STATE_B_IDLE;
+
+		/* Phy will not be enabled if cable is already
+		 * plugged-in. Schedule to enable phy.
+		 * Use same delay to avoid any race condition.
+		 */
+		schedule_delayed_work(&ab->dwork, ab->link_status_wait);
+	}
+
+	return 0;
+}
+
+static int ab8500_usb_set_host(struct otg_transceiver *otg,
+					struct usb_bus *host)
+{
+	struct ab8500_usb *ab;
+
+	if (!otg)
+		return -ENODEV;
+
+	ab = xceiv_to_ab(otg);
+
+	/* Some drivers call this function in atomic context.
+	 * Do not update ab8500 registers directly till this
+	 * is fixed.
+	 */
+
+	if (!host) {
+		/* TODO: Disable regulators. */
+		ab->otg.host = NULL;
+		schedule_work(&ab->phy_dis_work);
+	} else {
+		ab->otg.host = host;
+		/* Phy will not be enabled if cable is already
+		 * plugged-in. Schedule to enable phy.
+		 * Use same delay to avoid any race condition.
+		 */
+		schedule_delayed_work(&ab->dwork, ab->link_status_wait);
+	}
+
+	return 0;
+}
+
+static void ab8500_usb_irq_free(struct ab8500_usb *ab)
+{
+	if (ab->rev < 0x20) {
+		free_irq(ab->irq_num_id_rise, ab);
+		free_irq(ab->irq_num_id_fall, ab);
+		free_irq(ab->irq_num_vbus_rise, ab);
+		free_irq(ab->irq_num_vbus_fall, ab);
+	} else {
+		free_irq(ab->irq_num_link_status, ab);
+	}
+}
+
+static int ab8500_usb_v1x_res_setup(struct platform_device *pdev,
+				struct ab8500_usb *ab)
+{
+	int err;
+
+	ab->irq_num_id_rise = platform_get_irq_byname(pdev, "ID_WAKEUP_R");
+	if (ab->irq_num_id_rise < 0) {
+		dev_err(&pdev->dev, "ID rise irq not found\n");
+		return ab->irq_num_id_rise;
+	}
+	err = request_threaded_irq(ab->irq_num_id_rise, NULL,
+		ab8500_usb_v1x_common_irq,
+		IRQF_NO_SUSPEND | IRQF_SHARED,
+		"usb-id-rise", ab);
+	if (err < 0) {
+		dev_err(ab->dev, "request_irq failed for ID rise irq\n");
+		goto fail0;
+	}
+
+	ab->irq_num_id_fall = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
+	if (ab->irq_num_id_fall < 0) {
+		dev_err(&pdev->dev, "ID fall irq not found\n");
+		return ab->irq_num_id_fall;
+	}
+	err = request_threaded_irq(ab->irq_num_id_fall, NULL,
+		ab8500_usb_v1x_common_irq,
+		IRQF_NO_SUSPEND | IRQF_SHARED,
+		"usb-id-fall", ab);
+	if (err < 0) {
+		dev_err(ab->dev, "request_irq failed for ID fall irq\n");
+		goto fail1;
+	}
+
+	ab->irq_num_vbus_rise = platform_get_irq_byname(pdev, "VBUS_DET_R");
+	if (ab->irq_num_vbus_rise < 0) {
+		dev_err(&pdev->dev, "VBUS rise irq not found\n");
+		return ab->irq_num_vbus_rise;
+	}
+	err = request_threaded_irq(ab->irq_num_vbus_rise, NULL,
+		ab8500_usb_v1x_common_irq,
+		IRQF_NO_SUSPEND | IRQF_SHARED,
+		"usb-vbus-rise", ab);
+	if (err < 0) {
+		dev_err(ab->dev, "request_irq failed for Vbus rise irq\n");
+		goto fail2;
+	}
+
+	ab->irq_num_vbus_fall = platform_get_irq_byname(pdev, "VBUS_DET_F");
+	if (ab->irq_num_vbus_fall < 0) {
+		dev_err(&pdev->dev, "VBUS fall irq not found\n");
+		return ab->irq_num_vbus_fall;
+	}
+	err = request_threaded_irq(ab->irq_num_vbus_fall, NULL,
+		ab8500_usb_v1x_vbus_fall_irq,
+		IRQF_NO_SUSPEND | IRQF_SHARED,
+		"usb-vbus-fall", ab);
+	if (err < 0) {
+		dev_err(ab->dev, "request_irq failed for Vbus fall irq\n");
+		goto fail3;
+	}
+
+	return 0;
+fail3:
+	free_irq(ab->irq_num_vbus_rise, ab);
+fail2:
+	free_irq(ab->irq_num_id_fall, ab);
+fail1:
+	free_irq(ab->irq_num_id_rise, ab);
+fail0:
+	return err;
+}
+
+static int ab8500_usb_v2_res_setup(struct platform_device *pdev,
+				struct ab8500_usb *ab)
+{
+	int err;
+
+	ab->irq_num_link_status = platform_get_irq_byname(pdev,
+						"USB_LINK_STATUS");
+	if (ab->irq_num_link_status < 0) {
+		dev_err(&pdev->dev, "Link status irq not found\n");
+		return ab->irq_num_link_status;
+	}
+
+	err = request_threaded_irq(ab->irq_num_link_status, NULL,
+		ab8500_usb_v20_irq,
+		IRQF_NO_SUSPEND | IRQF_SHARED,
+		"usb-link-status", ab);
+	if (err < 0) {
+		dev_err(ab->dev,
+			"request_irq failed for link status irq\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int __devinit ab8500_usb_probe(struct platform_device *pdev)
+{
+	struct ab8500_usb	*ab;
+	int err;
+	int rev;
+
+	rev = abx500_get_chip_id(&pdev->dev);
+	if (rev < 0) {
+		dev_err(&pdev->dev, "Chip id read failed\n");
+		return rev;
+	} else if (rev < 0x10) {
+		dev_err(&pdev->dev, "Unsupported AB8500 chip\n");
+		return -ENODEV;
+	}
+
+	ab = kzalloc(sizeof *ab, GFP_KERNEL);
+	if (!ab)
+		return -ENOMEM;
+
+	ab->dev			= &pdev->dev;
+	ab->rev			= rev;
+	ab->otg.dev		= ab->dev;
+	ab->otg.label		= "ab8500";
+	ab->otg.state		= OTG_STATE_UNDEFINED;
+	ab->otg.set_host	= ab8500_usb_set_host;
+	ab->otg.set_peripheral	= ab8500_usb_set_peripheral;
+	ab->otg.set_suspend	= ab8500_usb_set_suspend;
+	ab->otg.set_power	= ab8500_usb_set_power;
+
+	platform_set_drvdata(pdev, ab);
+
+	BLOCKING_INIT_NOTIFIER_HEAD(&ab->otg.notifier);
+
+	/* v1: Wait for link status to become stable.
+	 * all: Updates form set_host and set_peripheral as they are atomic.
+	 */
+	INIT_DELAYED_WORK(&ab->dwork, ab8500_usb_delayed_work);
+
+	/* all: Disable phy when called from set_host and set_peripheral */
+	INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work);
+
+	if (ab->rev < 0x20) {
+		err = ab8500_usb_v1x_res_setup(pdev, ab);
+		ab->link_status_wait = AB8500_V1x_LINK_STAT_WAIT;
+	} else {
+		err = ab8500_usb_v2_res_setup(pdev, ab);
+	}
+
+	if (err < 0)
+		goto fail0;
+
+	err = otg_set_transceiver(&ab->otg);
+	if (err) {
+		dev_err(&pdev->dev, "Can't register transceiver\n");
+		goto fail1;
+	}
+
+	dev_info(&pdev->dev, "AB8500 usb driver initialized\n");
+
+	return 0;
+fail1:
+	ab8500_usb_irq_free(ab);
+fail0:
+	kfree(ab);
+	return err;
+}
+
+static int __devexit ab8500_usb_remove(struct platform_device *pdev)
+{
+	struct ab8500_usb *ab = platform_get_drvdata(pdev);
+
+	ab8500_usb_irq_free(ab);
+
+	cancel_delayed_work_sync(&ab->dwork);
+
+	cancel_work_sync(&ab->phy_dis_work);
+
+	otg_set_transceiver(NULL);
+
+	ab8500_usb_host_phy_dis(ab);
+	ab8500_usb_peri_phy_dis(ab);
+
+	platform_set_drvdata(pdev, NULL);
+
+	kfree(ab);
+
+	return 0;
+}
+
+static struct platform_driver ab8500_usb_driver = {
+	.probe		= ab8500_usb_probe,
+	.remove		= __devexit_p(ab8500_usb_remove),
+	.driver		= {
+		.name	= "ab8500-usb",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init ab8500_usb_init(void)
+{
+	return platform_driver_register(&ab8500_usb_driver);
+}
+subsys_initcall(ab8500_usb_init);
+
+static void __exit ab8500_usb_exit(void)
+{
+	platform_driver_unregister(&ab8500_usb_driver);
+}
+module_exit(ab8500_usb_exit);
+
+MODULE_ALIAS("platform:ab8500_usb");
+MODULE_AUTHOR("ST-Ericsson AB");
+MODULE_DESCRIPTION("AB8500 usb transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 45696949241..e00fa1b22ec 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -1247,7 +1247,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c)
 	isp->timer.data = 0;
 	set_bit(WORK_STOP, &isp->todo);
 	del_timer_sync(&isp->timer);
-	flush_scheduled_work();
+	flush_work_sync(&isp->work);
 
 	put_device(&i2c->dev);
 	the_transceiver = NULL;
diff --git a/drivers/usb/otg/msm72k_otg.c b/drivers/usb/otg/msm72k_otg.c
new file mode 100644
index 00000000000..1cd52edcd0c
--- /dev/null
+++ b/drivers/usb/otg/msm72k_otg.c
@@ -0,0 +1,1125 @@
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/uaccess.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/msm_hsusb.h>
+#include <linux/usb/msm_hsusb_hw.h>
+
+#include <mach/clk.h>
+
+#define MSM_USB_BASE	(motg->regs)
+#define DRIVER_NAME	"msm_otg"
+
+#define ULPI_IO_TIMEOUT_USEC	(10 * 1000)
+static int ulpi_read(struct otg_transceiver *otg, u32 reg)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	int cnt = 0;
+
+	/* initiate read operation */
+	writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg),
+	       USB_ULPI_VIEWPORT);
+
+	/* wait for completion */
+	while (cnt < ULPI_IO_TIMEOUT_USEC) {
+		if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
+			break;
+		udelay(1);
+		cnt++;
+	}
+
+	if (cnt >= ULPI_IO_TIMEOUT_USEC) {
+		dev_err(otg->dev, "ulpi_read: timeout %08x\n",
+			readl(USB_ULPI_VIEWPORT));
+		return -ETIMEDOUT;
+	}
+	return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT));
+}
+
+static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	int cnt = 0;
+
+	/* initiate write operation */
+	writel(ULPI_RUN | ULPI_WRITE |
+	       ULPI_ADDR(reg) | ULPI_DATA(val),
+	       USB_ULPI_VIEWPORT);
+
+	/* wait for completion */
+	while (cnt < ULPI_IO_TIMEOUT_USEC) {
+		if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
+			break;
+		udelay(1);
+		cnt++;
+	}
+
+	if (cnt >= ULPI_IO_TIMEOUT_USEC) {
+		dev_err(otg->dev, "ulpi_write: timeout\n");
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+static struct otg_io_access_ops msm_otg_io_ops = {
+	.read = ulpi_read,
+	.write = ulpi_write,
+};
+
+static void ulpi_init(struct msm_otg *motg)
+{
+	struct msm_otg_platform_data *pdata = motg->pdata;
+	int *seq = pdata->phy_init_seq;
+
+	if (!seq)
+		return;
+
+	while (seq[0] >= 0) {
+		dev_vdbg(motg->otg.dev, "ulpi: write 0x%02x to 0x%02x\n",
+				seq[0], seq[1]);
+		ulpi_write(&motg->otg, seq[0], seq[1]);
+		seq += 2;
+	}
+}
+
+static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
+{
+	int ret;
+
+	if (assert) {
+		ret = clk_reset(motg->clk, CLK_RESET_ASSERT);
+		if (ret)
+			dev_err(motg->otg.dev, "usb hs_clk assert failed\n");
+	} else {
+		ret = clk_reset(motg->clk, CLK_RESET_DEASSERT);
+		if (ret)
+			dev_err(motg->otg.dev, "usb hs_clk deassert failed\n");
+	}
+	return ret;
+}
+
+static int msm_otg_phy_clk_reset(struct msm_otg *motg)
+{
+	int ret;
+
+	ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT);
+	if (ret) {
+		dev_err(motg->otg.dev, "usb phy clk assert failed\n");
+		return ret;
+	}
+	usleep_range(10000, 12000);
+	ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT);
+	if (ret)
+		dev_err(motg->otg.dev, "usb phy clk deassert failed\n");
+	return ret;
+}
+
+static int msm_otg_phy_reset(struct msm_otg *motg)
+{
+	u32 val;
+	int ret;
+	int retries;
+
+	ret = msm_otg_link_clk_reset(motg, 1);
+	if (ret)
+		return ret;
+	ret = msm_otg_phy_clk_reset(motg);
+	if (ret)
+		return ret;
+	ret = msm_otg_link_clk_reset(motg, 0);
+	if (ret)
+		return ret;
+
+	val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK;
+	writel(val | PORTSC_PTS_ULPI, USB_PORTSC);
+
+	for (retries = 3; retries > 0; retries--) {
+		ret = ulpi_write(&motg->otg, ULPI_FUNC_CTRL_SUSPENDM,
+				ULPI_CLR(ULPI_FUNC_CTRL));
+		if (!ret)
+			break;
+		ret = msm_otg_phy_clk_reset(motg);
+		if (ret)
+			return ret;
+	}
+	if (!retries)
+		return -ETIMEDOUT;
+
+	/* This reset calibrates the phy, if the above write succeeded */
+	ret = msm_otg_phy_clk_reset(motg);
+	if (ret)
+		return ret;
+
+	for (retries = 3; retries > 0; retries--) {
+		ret = ulpi_read(&motg->otg, ULPI_DEBUG);
+		if (ret != -ETIMEDOUT)
+			break;
+		ret = msm_otg_phy_clk_reset(motg);
+		if (ret)
+			return ret;
+	}
+	if (!retries)
+		return -ETIMEDOUT;
+
+	dev_info(motg->otg.dev, "phy_reset: success\n");
+	return 0;
+}
+
+#define LINK_RESET_TIMEOUT_USEC		(250 * 1000)
+static int msm_otg_reset(struct otg_transceiver *otg)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	struct msm_otg_platform_data *pdata = motg->pdata;
+	int cnt = 0;
+	int ret;
+	u32 val = 0;
+	u32 ulpi_val = 0;
+
+	ret = msm_otg_phy_reset(motg);
+	if (ret) {
+		dev_err(otg->dev, "phy_reset failed\n");
+		return ret;
+	}
+
+	ulpi_init(motg);
+
+	writel(USBCMD_RESET, USB_USBCMD);
+	while (cnt < LINK_RESET_TIMEOUT_USEC) {
+		if (!(readl(USB_USBCMD) & USBCMD_RESET))
+			break;
+		udelay(1);
+		cnt++;
+	}
+	if (cnt >= LINK_RESET_TIMEOUT_USEC)
+		return -ETIMEDOUT;
+
+	/* select ULPI phy */
+	writel(0x80000000, USB_PORTSC);
+
+	msleep(100);
+
+	writel(0x0, USB_AHBBURST);
+	writel(0x00, USB_AHBMODE);
+
+	if (pdata->otg_control == OTG_PHY_CONTROL) {
+		val = readl(USB_OTGSC);
+		if (pdata->mode == USB_OTG) {
+			ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID;
+			val |= OTGSC_IDIE | OTGSC_BSVIE;
+		} else if (pdata->mode == USB_PERIPHERAL) {
+			ulpi_val = ULPI_INT_SESS_VALID;
+			val |= OTGSC_BSVIE;
+		}
+		writel(val, USB_OTGSC);
+		ulpi_write(otg, ulpi_val, ULPI_USB_INT_EN_RISE);
+		ulpi_write(otg, ulpi_val, ULPI_USB_INT_EN_FALL);
+	}
+
+	return 0;
+}
+
+#define PHY_SUSPEND_TIMEOUT_USEC	(500 * 1000)
+static int msm_otg_suspend(struct msm_otg *motg)
+{
+	struct otg_transceiver *otg = &motg->otg;
+	struct usb_bus *bus = otg->host;
+	struct msm_otg_platform_data *pdata = motg->pdata;
+	int cnt = 0;
+
+	if (atomic_read(&motg->in_lpm))
+		return 0;
+
+	disable_irq(motg->irq);
+	/*
+	 * Interrupt Latch Register auto-clear feature is not present
+	 * in all PHY versions. Latch register is clear on read type.
+	 * Clear latch register to avoid spurious wakeup from
+	 * low power mode (LPM).
+	 */
+	ulpi_read(otg, 0x14);
+
+	/*
+	 * PHY comparators are disabled when PHY enters into low power
+	 * mode (LPM). Keep PHY comparators ON in LPM only when we expect
+	 * VBUS/Id notifications from USB PHY. Otherwise turn off USB
+	 * PHY comparators. This save significant amount of power.
+	 */
+	if (pdata->otg_control == OTG_PHY_CONTROL)
+		ulpi_write(otg, 0x01, 0x30);
+
+	/*
+	 * PLL is not turned off when PHY enters into low power mode (LPM).
+	 * Disable PLL for maximum power savings.
+	 */
+	ulpi_write(otg, 0x08, 0x09);
+
+	/*
+	 * PHY may take some time or even fail to enter into low power
+	 * mode (LPM). Hence poll for 500 msec and reset the PHY and link
+	 * in failure case.
+	 */
+	writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
+	while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
+		if (readl(USB_PORTSC) & PORTSC_PHCD)
+			break;
+		udelay(1);
+		cnt++;
+	}
+
+	if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) {
+		dev_err(otg->dev, "Unable to suspend PHY\n");
+		msm_otg_reset(otg);
+		enable_irq(motg->irq);
+		return -ETIMEDOUT;
+	}
+
+	/*
+	 * PHY has capability to generate interrupt asynchronously in low
+	 * power mode (LPM). This interrupt is level triggered. So USB IRQ
+	 * line must be disabled till async interrupt enable bit is cleared
+	 * in USBCMD register. Assert STP (ULPI interface STOP signal) to
+	 * block data communication from PHY.
+	 */
+	writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD);
+
+	clk_disable(motg->pclk);
+	clk_disable(motg->clk);
+	if (motg->core_clk)
+		clk_disable(motg->core_clk);
+
+	if (device_may_wakeup(otg->dev))
+		enable_irq_wake(motg->irq);
+	if (bus)
+		clear_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
+
+	atomic_set(&motg->in_lpm, 1);
+	enable_irq(motg->irq);
+
+	dev_info(otg->dev, "USB in low power mode\n");
+
+	return 0;
+}
+
+#define PHY_RESUME_TIMEOUT_USEC	(100 * 1000)
+static int msm_otg_resume(struct msm_otg *motg)
+{
+	struct otg_transceiver *otg = &motg->otg;
+	struct usb_bus *bus = otg->host;
+	int cnt = 0;
+	unsigned temp;
+
+	if (!atomic_read(&motg->in_lpm))
+		return 0;
+
+	clk_enable(motg->pclk);
+	clk_enable(motg->clk);
+	if (motg->core_clk)
+		clk_enable(motg->core_clk);
+
+	temp = readl(USB_USBCMD);
+	temp &= ~ASYNC_INTR_CTRL;
+	temp &= ~ULPI_STP_CTRL;
+	writel(temp, USB_USBCMD);
+
+	/*
+	 * PHY comes out of low power mode (LPM) in case of wakeup
+	 * from asynchronous interrupt.
+	 */
+	if (!(readl(USB_PORTSC) & PORTSC_PHCD))
+		goto skip_phy_resume;
+
+	writel(readl(USB_PORTSC) & ~PORTSC_PHCD, USB_PORTSC);
+	while (cnt < PHY_RESUME_TIMEOUT_USEC) {
+		if (!(readl(USB_PORTSC) & PORTSC_PHCD))
+			break;
+		udelay(1);
+		cnt++;
+	}
+
+	if (cnt >= PHY_RESUME_TIMEOUT_USEC) {
+		/*
+		 * This is a fatal error. Reset the link and
+		 * PHY. USB state can not be restored. Re-insertion
+		 * of USB cable is the only way to get USB working.
+		 */
+		dev_err(otg->dev, "Unable to resume USB."
+				"Re-plugin the cable\n");
+		msm_otg_reset(otg);
+	}
+
+skip_phy_resume:
+	if (device_may_wakeup(otg->dev))
+		disable_irq_wake(motg->irq);
+	if (bus)
+		set_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
+
+	if (motg->async_int) {
+		motg->async_int = 0;
+		pm_runtime_put(otg->dev);
+		enable_irq(motg->irq);
+	}
+
+	atomic_set(&motg->in_lpm, 0);
+
+	dev_info(otg->dev, "USB exited from low power mode\n");
+
+	return 0;
+}
+
+static void msm_otg_start_host(struct otg_transceiver *otg, int on)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	struct msm_otg_platform_data *pdata = motg->pdata;
+	struct usb_hcd *hcd;
+
+	if (!otg->host)
+		return;
+
+	hcd = bus_to_hcd(otg->host);
+
+	if (on) {
+		dev_dbg(otg->dev, "host on\n");
+
+		if (pdata->vbus_power)
+			pdata->vbus_power(1);
+		/*
+		 * Some boards have a switch cotrolled by gpio
+		 * to enable/disable internal HUB. Enable internal
+		 * HUB before kicking the host.
+		 */
+		if (pdata->setup_gpio)
+			pdata->setup_gpio(OTG_STATE_A_HOST);
+#ifdef CONFIG_USB
+		usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
+#endif
+	} else {
+		dev_dbg(otg->dev, "host off\n");
+
+#ifdef CONFIG_USB
+		usb_remove_hcd(hcd);
+#endif
+		if (pdata->setup_gpio)
+			pdata->setup_gpio(OTG_STATE_UNDEFINED);
+		if (pdata->vbus_power)
+			pdata->vbus_power(0);
+	}
+}
+
+static int msm_otg_set_host(struct otg_transceiver *otg, struct usb_bus *host)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	struct usb_hcd *hcd;
+
+	/*
+	 * Fail host registration if this board can support
+	 * only peripheral configuration.
+	 */
+	if (motg->pdata->mode == USB_PERIPHERAL) {
+		dev_info(otg->dev, "Host mode is not supported\n");
+		return -ENODEV;
+	}
+
+	if (!host) {
+		if (otg->state == OTG_STATE_A_HOST) {
+			pm_runtime_get_sync(otg->dev);
+			msm_otg_start_host(otg, 0);
+			otg->host = NULL;
+			otg->state = OTG_STATE_UNDEFINED;
+			schedule_work(&motg->sm_work);
+		} else {
+			otg->host = NULL;
+		}
+
+		return 0;
+	}
+
+	hcd = bus_to_hcd(host);
+	hcd->power_budget = motg->pdata->power_budget;
+
+	otg->host = host;
+	dev_dbg(otg->dev, "host driver registered w/ tranceiver\n");
+
+	/*
+	 * Kick the state machine work, if peripheral is not supported
+	 * or peripheral is already registered with us.
+	 */
+	if (motg->pdata->mode == USB_HOST || otg->gadget) {
+		pm_runtime_get_sync(otg->dev);
+		schedule_work(&motg->sm_work);
+	}
+
+	return 0;
+}
+
+static void msm_otg_start_peripheral(struct otg_transceiver *otg, int on)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	struct msm_otg_platform_data *pdata = motg->pdata;
+
+	if (!otg->gadget)
+		return;
+
+	if (on) {
+		dev_dbg(otg->dev, "gadget on\n");
+		/*
+		 * Some boards have a switch cotrolled by gpio
+		 * to enable/disable internal HUB. Disable internal
+		 * HUB before kicking the gadget.
+		 */
+		if (pdata->setup_gpio)
+			pdata->setup_gpio(OTG_STATE_B_PERIPHERAL);
+		usb_gadget_vbus_connect(otg->gadget);
+	} else {
+		dev_dbg(otg->dev, "gadget off\n");
+		usb_gadget_vbus_disconnect(otg->gadget);
+		if (pdata->setup_gpio)
+			pdata->setup_gpio(OTG_STATE_UNDEFINED);
+	}
+
+}
+
+static int msm_otg_set_peripheral(struct otg_transceiver *otg,
+			struct usb_gadget *gadget)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+
+	/*
+	 * Fail peripheral registration if this board can support
+	 * only host configuration.
+	 */
+	if (motg->pdata->mode == USB_HOST) {
+		dev_info(otg->dev, "Peripheral mode is not supported\n");
+		return -ENODEV;
+	}
+
+	if (!gadget) {
+		if (otg->state == OTG_STATE_B_PERIPHERAL) {
+			pm_runtime_get_sync(otg->dev);
+			msm_otg_start_peripheral(otg, 0);
+			otg->gadget = NULL;
+			otg->state = OTG_STATE_UNDEFINED;
+			schedule_work(&motg->sm_work);
+		} else {
+			otg->gadget = NULL;
+		}
+
+		return 0;
+	}
+	otg->gadget = gadget;
+	dev_dbg(otg->dev, "peripheral driver registered w/ tranceiver\n");
+
+	/*
+	 * Kick the state machine work, if host is not supported
+	 * or host is already registered with us.
+	 */
+	if (motg->pdata->mode == USB_PERIPHERAL || otg->host) {
+		pm_runtime_get_sync(otg->dev);
+		schedule_work(&motg->sm_work);
+	}
+
+	return 0;
+}
+
+/*
+ * We support OTG, Peripheral only and Host only configurations. In case
+ * of OTG, mode switch (host-->peripheral/peripheral-->host) can happen
+ * via Id pin status or user request (debugfs). Id/BSV interrupts are not
+ * enabled when switch is controlled by user and default mode is supplied
+ * by board file, which can be changed by userspace later.
+ */
+static void msm_otg_init_sm(struct msm_otg *motg)
+{
+	struct msm_otg_platform_data *pdata = motg->pdata;
+	u32 otgsc = readl(USB_OTGSC);
+
+	switch (pdata->mode) {
+	case USB_OTG:
+		if (pdata->otg_control == OTG_PHY_CONTROL) {
+			if (otgsc & OTGSC_ID)
+				set_bit(ID, &motg->inputs);
+			else
+				clear_bit(ID, &motg->inputs);
+
+			if (otgsc & OTGSC_BSV)
+				set_bit(B_SESS_VLD, &motg->inputs);
+			else
+				clear_bit(B_SESS_VLD, &motg->inputs);
+		} else if (pdata->otg_control == OTG_USER_CONTROL) {
+			if (pdata->default_mode == USB_HOST) {
+				clear_bit(ID, &motg->inputs);
+			} else if (pdata->default_mode == USB_PERIPHERAL) {
+				set_bit(ID, &motg->inputs);
+				set_bit(B_SESS_VLD, &motg->inputs);
+			} else {
+				set_bit(ID, &motg->inputs);
+				clear_bit(B_SESS_VLD, &motg->inputs);
+			}
+		}
+		break;
+	case USB_HOST:
+		clear_bit(ID, &motg->inputs);
+		break;
+	case USB_PERIPHERAL:
+		set_bit(ID, &motg->inputs);
+		if (otgsc & OTGSC_BSV)
+			set_bit(B_SESS_VLD, &motg->inputs);
+		else
+			clear_bit(B_SESS_VLD, &motg->inputs);
+		break;
+	default:
+		break;
+	}
+}
+
+static void msm_otg_sm_work(struct work_struct *w)
+{
+	struct msm_otg *motg = container_of(w, struct msm_otg, sm_work);
+	struct otg_transceiver *otg = &motg->otg;
+
+	switch (otg->state) {
+	case OTG_STATE_UNDEFINED:
+		dev_dbg(otg->dev, "OTG_STATE_UNDEFINED state\n");
+		msm_otg_reset(otg);
+		msm_otg_init_sm(motg);
+		otg->state = OTG_STATE_B_IDLE;
+		/* FALL THROUGH */
+	case OTG_STATE_B_IDLE:
+		dev_dbg(otg->dev, "OTG_STATE_B_IDLE state\n");
+		if (!test_bit(ID, &motg->inputs) && otg->host) {
+			/* disable BSV bit */
+			writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC);
+			msm_otg_start_host(otg, 1);
+			otg->state = OTG_STATE_A_HOST;
+		} else if (test_bit(B_SESS_VLD, &motg->inputs) && otg->gadget) {
+			msm_otg_start_peripheral(otg, 1);
+			otg->state = OTG_STATE_B_PERIPHERAL;
+		}
+		pm_runtime_put_sync(otg->dev);
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		dev_dbg(otg->dev, "OTG_STATE_B_PERIPHERAL state\n");
+		if (!test_bit(B_SESS_VLD, &motg->inputs) ||
+				!test_bit(ID, &motg->inputs)) {
+			msm_otg_start_peripheral(otg, 0);
+			otg->state = OTG_STATE_B_IDLE;
+			msm_otg_reset(otg);
+			schedule_work(w);
+		}
+		break;
+	case OTG_STATE_A_HOST:
+		dev_dbg(otg->dev, "OTG_STATE_A_HOST state\n");
+		if (test_bit(ID, &motg->inputs)) {
+			msm_otg_start_host(otg, 0);
+			otg->state = OTG_STATE_B_IDLE;
+			msm_otg_reset(otg);
+			schedule_work(w);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static irqreturn_t msm_otg_irq(int irq, void *data)
+{
+	struct msm_otg *motg = data;
+	struct otg_transceiver *otg = &motg->otg;
+	u32 otgsc = 0;
+
+	if (atomic_read(&motg->in_lpm)) {
+		disable_irq_nosync(irq);
+		motg->async_int = 1;
+		pm_runtime_get(otg->dev);
+		return IRQ_HANDLED;
+	}
+
+	otgsc = readl(USB_OTGSC);
+	if (!(otgsc & (OTGSC_IDIS | OTGSC_BSVIS)))
+		return IRQ_NONE;
+
+	if ((otgsc & OTGSC_IDIS) && (otgsc & OTGSC_IDIE)) {
+		if (otgsc & OTGSC_ID)
+			set_bit(ID, &motg->inputs);
+		else
+			clear_bit(ID, &motg->inputs);
+		dev_dbg(otg->dev, "ID set/clear\n");
+		pm_runtime_get_noresume(otg->dev);
+	} else if ((otgsc & OTGSC_BSVIS) && (otgsc & OTGSC_BSVIE)) {
+		if (otgsc & OTGSC_BSV)
+			set_bit(B_SESS_VLD, &motg->inputs);
+		else
+			clear_bit(B_SESS_VLD, &motg->inputs);
+		dev_dbg(otg->dev, "BSV set/clear\n");
+		pm_runtime_get_noresume(otg->dev);
+	}
+
+	writel(otgsc, USB_OTGSC);
+	schedule_work(&motg->sm_work);
+	return IRQ_HANDLED;
+}
+
+static int msm_otg_mode_show(struct seq_file *s, void *unused)
+{
+	struct msm_otg *motg = s->private;
+	struct otg_transceiver *otg = &motg->otg;
+
+	switch (otg->state) {
+	case OTG_STATE_A_HOST:
+		seq_printf(s, "host\n");
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		seq_printf(s, "peripheral\n");
+		break;
+	default:
+		seq_printf(s, "none\n");
+		break;
+	}
+
+	return 0;
+}
+
+static int msm_otg_mode_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, msm_otg_mode_show, inode->i_private);
+}
+
+static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
+				size_t count, loff_t *ppos)
+{
+	struct msm_otg *motg = file->private_data;
+	char buf[16];
+	struct otg_transceiver *otg = &motg->otg;
+	int status = count;
+	enum usb_mode_type req_mode;
+
+	memset(buf, 0x00, sizeof(buf));
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) {
+		status = -EFAULT;
+		goto out;
+	}
+
+	if (!strncmp(buf, "host", 4)) {
+		req_mode = USB_HOST;
+	} else if (!strncmp(buf, "peripheral", 10)) {
+		req_mode = USB_PERIPHERAL;
+	} else if (!strncmp(buf, "none", 4)) {
+		req_mode = USB_NONE;
+	} else {
+		status = -EINVAL;
+		goto out;
+	}
+
+	switch (req_mode) {
+	case USB_NONE:
+		switch (otg->state) {
+		case OTG_STATE_A_HOST:
+		case OTG_STATE_B_PERIPHERAL:
+			set_bit(ID, &motg->inputs);
+			clear_bit(B_SESS_VLD, &motg->inputs);
+			break;
+		default:
+			goto out;
+		}
+		break;
+	case USB_PERIPHERAL:
+		switch (otg->state) {
+		case OTG_STATE_B_IDLE:
+		case OTG_STATE_A_HOST:
+			set_bit(ID, &motg->inputs);
+			set_bit(B_SESS_VLD, &motg->inputs);
+			break;
+		default:
+			goto out;
+		}
+		break;
+	case USB_HOST:
+		switch (otg->state) {
+		case OTG_STATE_B_IDLE:
+		case OTG_STATE_B_PERIPHERAL:
+			clear_bit(ID, &motg->inputs);
+			break;
+		default:
+			goto out;
+		}
+		break;
+	default:
+		goto out;
+	}
+
+	pm_runtime_get_sync(otg->dev);
+	schedule_work(&motg->sm_work);
+out:
+	return status;
+}
+
+const struct file_operations msm_otg_mode_fops = {
+	.open = msm_otg_mode_open,
+	.read = seq_read,
+	.write = msm_otg_mode_write,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static struct dentry *msm_otg_dbg_root;
+static struct dentry *msm_otg_dbg_mode;
+
+static int msm_otg_debugfs_init(struct msm_otg *motg)
+{
+	msm_otg_dbg_root = debugfs_create_dir("msm_otg", NULL);
+
+	if (!msm_otg_dbg_root || IS_ERR(msm_otg_dbg_root))
+		return -ENODEV;
+
+	msm_otg_dbg_mode = debugfs_create_file("mode", S_IRUGO | S_IWUSR,
+				msm_otg_dbg_root, motg, &msm_otg_mode_fops);
+	if (!msm_otg_dbg_mode) {
+		debugfs_remove(msm_otg_dbg_root);
+		msm_otg_dbg_root = NULL;
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void msm_otg_debugfs_cleanup(void)
+{
+	debugfs_remove(msm_otg_dbg_mode);
+	debugfs_remove(msm_otg_dbg_root);
+}
+
+static int __init msm_otg_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct resource *res;
+	struct msm_otg *motg;
+	struct otg_transceiver *otg;
+
+	dev_info(&pdev->dev, "msm_otg probe\n");
+	if (!pdev->dev.platform_data) {
+		dev_err(&pdev->dev, "No platform data given. Bailing out\n");
+		return -ENODEV;
+	}
+
+	motg = kzalloc(sizeof(struct msm_otg), GFP_KERNEL);
+	if (!motg) {
+		dev_err(&pdev->dev, "unable to allocate msm_otg\n");
+		return -ENOMEM;
+	}
+
+	motg->pdata = pdev->dev.platform_data;
+	otg = &motg->otg;
+	otg->dev = &pdev->dev;
+
+	motg->phy_reset_clk = clk_get(&pdev->dev, "usb_phy_clk");
+	if (IS_ERR(motg->phy_reset_clk)) {
+		dev_err(&pdev->dev, "failed to get usb_phy_clk\n");
+		ret = PTR_ERR(motg->phy_reset_clk);
+		goto free_motg;
+	}
+
+	motg->clk = clk_get(&pdev->dev, "usb_hs_clk");
+	if (IS_ERR(motg->clk)) {
+		dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
+		ret = PTR_ERR(motg->clk);
+		goto put_phy_reset_clk;
+	}
+
+	motg->pclk = clk_get(&pdev->dev, "usb_hs_pclk");
+	if (IS_ERR(motg->pclk)) {
+		dev_err(&pdev->dev, "failed to get usb_hs_pclk\n");
+		ret = PTR_ERR(motg->pclk);
+		goto put_clk;
+	}
+
+	/*
+	 * USB core clock is not present on all MSM chips. This
+	 * clock is introduced to remove the dependency on AXI
+	 * bus frequency.
+	 */
+	motg->core_clk = clk_get(&pdev->dev, "usb_hs_core_clk");
+	if (IS_ERR(motg->core_clk))
+		motg->core_clk = NULL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get platform resource mem\n");
+		ret = -ENODEV;
+		goto put_core_clk;
+	}
+
+	motg->regs = ioremap(res->start, resource_size(res));
+	if (!motg->regs) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		ret = -ENOMEM;
+		goto put_core_clk;
+	}
+	dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs);
+
+	motg->irq = platform_get_irq(pdev, 0);
+	if (!motg->irq) {
+		dev_err(&pdev->dev, "platform_get_irq failed\n");
+		ret = -ENODEV;
+		goto free_regs;
+	}
+
+	clk_enable(motg->clk);
+	clk_enable(motg->pclk);
+	if (motg->core_clk)
+		clk_enable(motg->core_clk);
+
+	writel(0, USB_USBINTR);
+	writel(0, USB_OTGSC);
+
+	INIT_WORK(&motg->sm_work, msm_otg_sm_work);
+	ret = request_irq(motg->irq, msm_otg_irq, IRQF_SHARED,
+					"msm_otg", motg);
+	if (ret) {
+		dev_err(&pdev->dev, "request irq failed\n");
+		goto disable_clks;
+	}
+
+	otg->init = msm_otg_reset;
+	otg->set_host = msm_otg_set_host;
+	otg->set_peripheral = msm_otg_set_peripheral;
+
+	otg->io_ops = &msm_otg_io_ops;
+
+	ret = otg_set_transceiver(&motg->otg);
+	if (ret) {
+		dev_err(&pdev->dev, "otg_set_transceiver failed\n");
+		goto free_irq;
+	}
+
+	platform_set_drvdata(pdev, motg);
+	device_init_wakeup(&pdev->dev, 1);
+
+	if (motg->pdata->mode == USB_OTG &&
+			motg->pdata->otg_control == OTG_USER_CONTROL) {
+		ret = msm_otg_debugfs_init(motg);
+		if (ret)
+			dev_dbg(&pdev->dev, "mode debugfs file is"
+					"not available\n");
+	}
+
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+free_irq:
+	free_irq(motg->irq, motg);
+disable_clks:
+	clk_disable(motg->pclk);
+	clk_disable(motg->clk);
+free_regs:
+	iounmap(motg->regs);
+put_core_clk:
+	if (motg->core_clk)
+		clk_put(motg->core_clk);
+	clk_put(motg->pclk);
+put_clk:
+	clk_put(motg->clk);
+put_phy_reset_clk:
+	clk_put(motg->phy_reset_clk);
+free_motg:
+	kfree(motg);
+	return ret;
+}
+
+static int __devexit msm_otg_remove(struct platform_device *pdev)
+{
+	struct msm_otg *motg = platform_get_drvdata(pdev);
+	struct otg_transceiver *otg = &motg->otg;
+	int cnt = 0;
+
+	if (otg->host || otg->gadget)
+		return -EBUSY;
+
+	msm_otg_debugfs_cleanup();
+	cancel_work_sync(&motg->sm_work);
+
+	msm_otg_resume(motg);
+
+	device_init_wakeup(&pdev->dev, 0);
+	pm_runtime_disable(&pdev->dev);
+
+	otg_set_transceiver(NULL);
+	free_irq(motg->irq, motg);
+
+	/*
+	 * Put PHY in low power mode.
+	 */
+	ulpi_read(otg, 0x14);
+	ulpi_write(otg, 0x08, 0x09);
+
+	writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
+	while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
+		if (readl(USB_PORTSC) & PORTSC_PHCD)
+			break;
+		udelay(1);
+		cnt++;
+	}
+	if (cnt >= PHY_SUSPEND_TIMEOUT_USEC)
+		dev_err(otg->dev, "Unable to suspend PHY\n");
+
+	clk_disable(motg->pclk);
+	clk_disable(motg->clk);
+	if (motg->core_clk)
+		clk_disable(motg->core_clk);
+
+	iounmap(motg->regs);
+	pm_runtime_set_suspended(&pdev->dev);
+
+	clk_put(motg->phy_reset_clk);
+	clk_put(motg->pclk);
+	clk_put(motg->clk);
+	if (motg->core_clk)
+		clk_put(motg->core_clk);
+
+	kfree(motg);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+static int msm_otg_runtime_idle(struct device *dev)
+{
+	struct msm_otg *motg = dev_get_drvdata(dev);
+	struct otg_transceiver *otg = &motg->otg;
+
+	dev_dbg(dev, "OTG runtime idle\n");
+
+	/*
+	 * It is observed some times that a spurious interrupt
+	 * comes when PHY is put into LPM immediately after PHY reset.
+	 * This 1 sec delay also prevents entering into LPM immediately
+	 * after asynchronous interrupt.
+	 */
+	if (otg->state != OTG_STATE_UNDEFINED)
+		pm_schedule_suspend(dev, 1000);
+
+	return -EAGAIN;
+}
+
+static int msm_otg_runtime_suspend(struct device *dev)
+{
+	struct msm_otg *motg = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "OTG runtime suspend\n");
+	return msm_otg_suspend(motg);
+}
+
+static int msm_otg_runtime_resume(struct device *dev)
+{
+	struct msm_otg *motg = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "OTG runtime resume\n");
+	return msm_otg_resume(motg);
+}
+#else
+#define msm_otg_runtime_idle	NULL
+#define msm_otg_runtime_suspend	NULL
+#define msm_otg_runtime_resume	NULL
+#endif
+
+#ifdef CONFIG_PM
+static int msm_otg_pm_suspend(struct device *dev)
+{
+	struct msm_otg *motg = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "OTG PM suspend\n");
+	return msm_otg_suspend(motg);
+}
+
+static int msm_otg_pm_resume(struct device *dev)
+{
+	struct msm_otg *motg = dev_get_drvdata(dev);
+	int ret;
+
+	dev_dbg(dev, "OTG PM resume\n");
+
+	ret = msm_otg_resume(motg);
+	if (ret)
+		return ret;
+
+	/*
+	 * Runtime PM Documentation recommends bringing the
+	 * device to full powered state upon resume.
+	 */
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+#else
+#define msm_otg_pm_suspend	NULL
+#define msm_otg_pm_resume	NULL
+#endif
+
+static const struct dev_pm_ops msm_otg_dev_pm_ops = {
+	.runtime_suspend = msm_otg_runtime_suspend,
+	.runtime_resume  = msm_otg_runtime_resume,
+	.runtime_idle    = msm_otg_runtime_idle,
+	.suspend         = msm_otg_pm_suspend,
+	.resume          = msm_otg_pm_resume,
+};
+
+static struct platform_driver msm_otg_driver = {
+	.remove = __devexit_p(msm_otg_remove),
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.pm = &msm_otg_dev_pm_ops,
+	},
+};
+
+static int __init msm_otg_init(void)
+{
+	return platform_driver_probe(&msm_otg_driver, msm_otg_probe);
+}
+
+static void __exit msm_otg_exit(void)
+{
+	platform_driver_unregister(&msm_otg_driver);
+}
+
+module_init(msm_otg_init);
+module_exit(msm_otg_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MSM USB transceiver driver");
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index d335f484fcd..6ca505f333e 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -678,7 +678,8 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev)
 	/* disable complete OTG block */
 	twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
 
-	twl4030_phy_power(twl, 0);
+	if (!twl->asleep)
+		twl4030_phy_power(twl, 0);
 	regulator_put(twl->usb1v5);
 	regulator_put(twl->usb1v8);
 	regulator_put(twl->usb3v1);
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
new file mode 100644
index 00000000000..28f77010364
--- /dev/null
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -0,0 +1,493 @@
+/*
+ * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Hema HK <hemahk@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/usb/otg.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/notifier.h>
+#include <linux/slab.h>
+
+/* usb register definitions */
+#define USB_VENDOR_ID_LSB		0x00
+#define USB_VENDOR_ID_MSB		0x01
+#define USB_PRODUCT_ID_LSB		0x02
+#define USB_PRODUCT_ID_MSB		0x03
+#define USB_VBUS_CTRL_SET		0x04
+#define USB_VBUS_CTRL_CLR		0x05
+#define USB_ID_CTRL_SET			0x06
+#define USB_ID_CTRL_CLR			0x07
+#define USB_VBUS_INT_SRC		0x08
+#define USB_VBUS_INT_LATCH_SET		0x09
+#define USB_VBUS_INT_LATCH_CLR		0x0A
+#define USB_VBUS_INT_EN_LO_SET		0x0B
+#define USB_VBUS_INT_EN_LO_CLR		0x0C
+#define USB_VBUS_INT_EN_HI_SET		0x0D
+#define USB_VBUS_INT_EN_HI_CLR		0x0E
+#define USB_ID_INT_SRC			0x0F
+#define USB_ID_INT_LATCH_SET		0x10
+#define USB_ID_INT_LATCH_CLR		0x11
+
+#define USB_ID_INT_EN_LO_SET		0x12
+#define USB_ID_INT_EN_LO_CLR		0x13
+#define USB_ID_INT_EN_HI_SET		0x14
+#define USB_ID_INT_EN_HI_CLR		0x15
+#define USB_OTG_ADP_CTRL		0x16
+#define USB_OTG_ADP_HIGH		0x17
+#define USB_OTG_ADP_LOW			0x18
+#define USB_OTG_ADP_RISE		0x19
+#define USB_OTG_REVISION		0x1A
+
+/* to be moved to LDO */
+#define TWL6030_MISC2			0xE5
+#define TWL6030_CFG_LDO_PD2		0xF5
+#define TWL6030_BACKUP_REG		0xFA
+
+#define STS_HW_CONDITIONS		0x21
+
+/* In module TWL6030_MODULE_PM_MASTER */
+#define STS_HW_CONDITIONS		0x21
+#define STS_USB_ID			BIT(2)
+
+/* In module TWL6030_MODULE_PM_RECEIVER */
+#define VUSB_CFG_TRANS			0x71
+#define VUSB_CFG_STATE			0x72
+#define VUSB_CFG_VOLTAGE		0x73
+
+/* in module TWL6030_MODULE_MAIN_CHARGE */
+
+#define CHARGERUSB_CTRL1		0x8
+
+#define CONTROLLER_STAT1		0x03
+#define	VBUS_DET			BIT(2)
+
+struct twl6030_usb {
+	struct otg_transceiver	otg;
+	struct device		*dev;
+
+	/* for vbus reporting with irqs disabled */
+	spinlock_t		lock;
+
+	struct regulator		*usb3v3;
+
+	int			irq1;
+	int			irq2;
+	u8			linkstat;
+	u8			asleep;
+	bool			irq_enabled;
+};
+
+#define xceiv_to_twl(x)		container_of((x), struct twl6030_usb, otg);
+
+/*-------------------------------------------------------------------------*/
+
+static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module,
+						u8 data, u8 address)
+{
+	int ret = 0;
+
+	ret = twl_i2c_write_u8(module, data, address);
+	if (ret < 0)
+		dev_err(twl->dev,
+			"Write[0x%x] Error %d\n", address, ret);
+	return ret;
+}
+
+static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
+{
+	u8 data, ret = 0;
+
+	ret = twl_i2c_read_u8(module, &data, address);
+	if (ret >= 0)
+		ret = data;
+	else
+		dev_err(twl->dev,
+			"readb[0x%x,0x%x] Error %d\n",
+					module, address, ret);
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+static int twl6030_set_phy_clk(struct otg_transceiver *x, int on)
+{
+	struct twl6030_usb *twl;
+	struct device *dev;
+	struct twl4030_usb_data *pdata;
+
+	twl = xceiv_to_twl(x);
+	dev  = twl->dev;
+	pdata = dev->platform_data;
+
+	pdata->phy_set_clock(twl->dev, on);
+
+	return 0;
+}
+
+static int twl6030_phy_init(struct otg_transceiver *x)
+{
+	u8 hw_state;
+	struct twl6030_usb *twl;
+	struct device *dev;
+	struct twl4030_usb_data *pdata;
+
+	twl = xceiv_to_twl(x);
+	dev  = twl->dev;
+	pdata = dev->platform_data;
+
+	regulator_enable(twl->usb3v3);
+
+	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+	if (hw_state & STS_USB_ID)
+		pdata->phy_power(twl->dev, 1, 1);
+	else
+		pdata->phy_power(twl->dev, 0, 1);
+
+	return 0;
+}
+
+static void twl6030_phy_shutdown(struct otg_transceiver *x)
+{
+	struct twl6030_usb *twl;
+	struct device *dev;
+	struct twl4030_usb_data *pdata;
+
+	twl = xceiv_to_twl(x);
+	dev  = twl->dev;
+	pdata = dev->platform_data;
+	pdata->phy_power(twl->dev, 0, 0);
+	regulator_disable(twl->usb3v3);
+}
+
+static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
+{
+
+	/* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
+	twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG);
+
+	/* Program CFG_LDO_PD2 register and set VUSB bit */
+	twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2);
+
+	/* Program MISC2 register and set bit VUSB_IN_VBAT */
+	twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2);
+
+	twl->usb3v3 = regulator_get(twl->dev, "vusb");
+	if (IS_ERR(twl->usb3v3))
+		return -ENODEV;
+
+	regulator_enable(twl->usb3v3);
+
+	/* Program the VUSB_CFG_TRANS for ACTIVE state. */
+	twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0x3F,
+						VUSB_CFG_TRANS);
+
+	/* Program the VUSB_CFG_STATE register to ON on all groups. */
+	twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0xE1,
+						VUSB_CFG_STATE);
+
+	/* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
+
+	/*
+	 * Program the USB_ID_CTRL_SET register to enable GND drive
+	 * and the ID comparators
+	 */
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET);
+
+	return 0;
+}
+
+static ssize_t twl6030_usb_vbus_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct twl6030_usb *twl = dev_get_drvdata(dev);
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&twl->lock, flags);
+
+	switch (twl->linkstat) {
+	case USB_EVENT_VBUS:
+	       ret = snprintf(buf, PAGE_SIZE, "vbus\n");
+	       break;
+	case USB_EVENT_ID:
+	       ret = snprintf(buf, PAGE_SIZE, "id\n");
+	       break;
+	case USB_EVENT_NONE:
+	       ret = snprintf(buf, PAGE_SIZE, "none\n");
+	       break;
+	default:
+	       ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
+	}
+	spin_unlock_irqrestore(&twl->lock, flags);
+
+	return ret;
+}
+static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);
+
+static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
+{
+	struct twl6030_usb *twl = _twl;
+	int status;
+	u8 vbus_state, hw_state;
+
+	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+	vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE,
+						CONTROLLER_STAT1);
+	if (!(hw_state & STS_USB_ID)) {
+		if (vbus_state & VBUS_DET) {
+			status = USB_EVENT_VBUS;
+			twl->otg.default_a = false;
+			twl->otg.state = OTG_STATE_B_IDLE;
+		} else {
+			status = USB_EVENT_NONE;
+		}
+		if (status >= 0) {
+			twl->linkstat = status;
+			blocking_notifier_call_chain(&twl->otg.notifier,
+						status, twl->otg.gadget);
+		}
+	}
+	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
+{
+	struct twl6030_usb *twl = _twl;
+	int status = USB_EVENT_NONE;
+	u8 hw_state;
+
+	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+	if (hw_state & STS_USB_ID) {
+
+		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
+		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
+								0x10);
+		status = USB_EVENT_ID;
+		twl->otg.default_a = true;
+		twl->otg.state = OTG_STATE_A_IDLE;
+		blocking_notifier_call_chain(&twl->otg.notifier, status,
+							twl->otg.gadget);
+	} else  {
+		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR,
+								0x10);
+		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
+								0x1);
+	}
+	twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status);
+	twl->linkstat = status;
+
+	return IRQ_HANDLED;
+}
+
+static int twl6030_set_peripheral(struct otg_transceiver *x,
+		struct usb_gadget *gadget)
+{
+	struct twl6030_usb *twl;
+
+	if (!x)
+		return -ENODEV;
+
+	twl = xceiv_to_twl(x);
+	twl->otg.gadget = gadget;
+	if (!gadget)
+		twl->otg.state = OTG_STATE_UNDEFINED;
+
+	return 0;
+}
+
+static int twl6030_enable_irq(struct otg_transceiver *x)
+{
+	struct twl6030_usb *twl = xceiv_to_twl(x);
+
+	twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1);
+	twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
+	twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
+
+	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
+				REG_INT_MSK_LINE_C);
+	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
+				REG_INT_MSK_STS_C);
+	twl6030_usb_irq(twl->irq2, twl);
+	twl6030_usbotg_irq(twl->irq1, twl);
+
+	return 0;
+}
+
+static int twl6030_set_vbus(struct otg_transceiver *x, bool enabled)
+{
+	struct twl6030_usb *twl = xceiv_to_twl(x);
+
+	/*
+	 * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1
+	 * register. This enables boost mode.
+	 */
+	if (enabled)
+		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40,
+						CHARGERUSB_CTRL1);
+	 else
+		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00,
+						CHARGERUSB_CTRL1);
+	return 0;
+}
+
+static int twl6030_set_host(struct otg_transceiver *x, struct usb_bus *host)
+{
+	struct twl6030_usb *twl;
+
+	if (!x)
+		return -ENODEV;
+
+	twl = xceiv_to_twl(x);
+	twl->otg.host = host;
+	if (!host)
+		twl->otg.state = OTG_STATE_UNDEFINED;
+	return 0;
+}
+
+static int __devinit twl6030_usb_probe(struct platform_device *pdev)
+{
+	struct twl6030_usb	*twl;
+	int			status, err;
+	struct twl4030_usb_data *pdata;
+	struct device *dev = &pdev->dev;
+	pdata = dev->platform_data;
+
+	twl = kzalloc(sizeof *twl, GFP_KERNEL);
+	if (!twl)
+		return -ENOMEM;
+
+	twl->dev		= &pdev->dev;
+	twl->irq1		= platform_get_irq(pdev, 0);
+	twl->irq2		= platform_get_irq(pdev, 1);
+	twl->otg.dev		= twl->dev;
+	twl->otg.label		= "twl6030";
+	twl->otg.set_host	= twl6030_set_host;
+	twl->otg.set_peripheral	= twl6030_set_peripheral;
+	twl->otg.set_vbus	= twl6030_set_vbus;
+	twl->otg.init		= twl6030_phy_init;
+	twl->otg.shutdown	= twl6030_phy_shutdown;
+
+	/* init spinlock for workqueue */
+	spin_lock_init(&twl->lock);
+
+	err = twl6030_usb_ldo_init(twl);
+	if (err) {
+		dev_err(&pdev->dev, "ldo init failed\n");
+		kfree(twl);
+		return err;
+	}
+	otg_set_transceiver(&twl->otg);
+
+	platform_set_drvdata(pdev, twl);
+	if (device_create_file(&pdev->dev, &dev_attr_vbus))
+		dev_warn(&pdev->dev, "could not create sysfs file\n");
+
+	BLOCKING_INIT_NOTIFIER_HEAD(&twl->otg.notifier);
+
+	twl->irq_enabled = true;
+	status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"twl6030_usb", twl);
+	if (status < 0) {
+		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+			twl->irq1, status);
+		device_remove_file(twl->dev, &dev_attr_vbus);
+		kfree(twl);
+		return status;
+	}
+
+	status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"twl6030_usb", twl);
+	if (status < 0) {
+		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+			twl->irq2, status);
+		free_irq(twl->irq1, twl);
+		device_remove_file(twl->dev, &dev_attr_vbus);
+		kfree(twl);
+		return status;
+	}
+
+	pdata->phy_init(dev);
+	twl6030_enable_irq(&twl->otg);
+	dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
+
+	return 0;
+}
+
+static int __exit twl6030_usb_remove(struct platform_device *pdev)
+{
+	struct twl6030_usb *twl = platform_get_drvdata(pdev);
+
+	struct twl4030_usb_data *pdata;
+	struct device *dev = &pdev->dev;
+	pdata = dev->platform_data;
+
+	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
+		REG_INT_MSK_LINE_C);
+	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
+			REG_INT_MSK_STS_C);
+	free_irq(twl->irq1, twl);
+	free_irq(twl->irq2, twl);
+	regulator_put(twl->usb3v3);
+	pdata->phy_exit(twl->dev);
+	device_remove_file(twl->dev, &dev_attr_vbus);
+	kfree(twl);
+
+	return 0;
+}
+
+static struct platform_driver twl6030_usb_driver = {
+	.probe		= twl6030_usb_probe,
+	.remove		= __exit_p(twl6030_usb_remove),
+	.driver		= {
+		.name	= "twl6030_usb",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init twl6030_usb_init(void)
+{
+	return platform_driver_register(&twl6030_usb_driver);
+}
+subsys_initcall(twl6030_usb_init);
+
+static void __exit twl6030_usb_exit(void)
+{
+	platform_driver_unregister(&twl6030_usb_driver);
+}
+module_exit(twl6030_usb_exit);
+
+MODULE_ALIAS("platform:twl6030_usb");
+MODULE_AUTHOR("Hema HK <hemahk@ti.com>");
+MODULE_DESCRIPTION("TWL6030 USB transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 76f8b355667..a2668d08926 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -75,6 +75,7 @@ struct ftdi_private {
 	unsigned long last_dtr_rts;	/* saved modem control outputs */
 	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
 	char prev_status, diff_status;        /* Used for TIOCMIWAIT */
+	char transmit_empty;	/* If transmitter is empty or not */
 	struct usb_serial_port *port;
 	__u16 interface;	/* FT2232C, FT2232H or FT4232H port interface
 				   (0 for FT232/245) */
@@ -201,6 +202,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
+	{ USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
@@ -696,6 +698,7 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
@@ -794,6 +797,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
 	{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ },					/* Optional parameter entry */
@@ -1320,6 +1324,23 @@ check_and_exit:
 	return 0;
 }
 
+static int get_lsr_info(struct usb_serial_port *port,
+			struct serial_struct __user *retinfo)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	unsigned int result = 0;
+
+	if (!retinfo)
+		return -EFAULT;
+
+	if (priv->transmit_empty)
+		result = TIOCSER_TEMT;
+
+	if (copy_to_user(retinfo, &result, sizeof(unsigned int)))
+		return -EFAULT;
+	return 0;
+}
+
 
 /* Determine type of FTDI chip based on USB config and descriptor. */
 static void ftdi_determine_type(struct usb_serial_port *port)
@@ -1869,6 +1890,12 @@ static int ftdi_process_packet(struct tty_struct *tty,
 			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 	}
 
+	/* save if the transmitter is empty or not */
+	if (packet[1] & FTDI_RS_TEMT)
+		priv->transmit_empty = 1;
+	else
+		priv->transmit_empty = 0;
+
 	len -= 2;
 	if (!len)
 		return 0;	/* status only */
@@ -2232,6 +2259,9 @@ static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
 			}
 		}
 		return 0;
+	case TIOCSERGETLSR:
+		return get_lsr_info(port, (struct serial_struct __user *)arg);
+		break;
 	default:
 		break;
 	}
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 263f6255119..bf086728548 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -114,6 +114,9 @@
 /* Lenz LI-USB Computer Interface. */
 #define FTDI_LENZ_LIUSB_PID	0xD780
 
+/* Vardaan Enterprises Serial Interface VEUSB422R3 */
+#define FTDI_VARDAAN_PID	0xF070
+
 /*
  * Xsens Technologies BV products (http://www.xsens.com).
  */
@@ -721,6 +724,7 @@
  */
 #define RTSYSTEMS_VID			0x2100	/* Vendor ID */
 #define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
+#define RTSYSTEMS_CT29B_PID		0x9e54	/* CT29B Radio Cable */
 
 /*
  * Bayer Ascensia Contour blood glucose meter USB-converter cable.
@@ -1077,6 +1081,11 @@
 #define MJSG_HD_RADIO_PID	0x937C
 
 /*
+ * D.O.Tec products (http://www.directout.eu)
+ */
+#define FTDI_DOTEC_PID 0x9868
+
+/*
  * Xverve Signalyzer tools (http://www.signalyzer.com/)
  */
 #define XVERVE_SIGNALYZER_ST_PID	0xBCA0
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index ef2977d3a61..cdfb1868cae 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -989,6 +989,7 @@ static struct usb_serial_driver option_1port_device = {
 	.set_termios       = usb_wwan_set_termios,
 	.tiocmget          = usb_wwan_tiocmget,
 	.tiocmset          = usb_wwan_tiocmset,
+	.ioctl             = usb_wwan_ioctl,
 	.attach            = usb_wwan_startup,
 	.disconnect        = usb_wwan_disconnect,
 	.release           = usb_wwan_release,
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index e199b0f4f99..5be866bb7a4 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -613,9 +613,8 @@ static void oti6858_close(struct usb_serial_port *port)
 	dbg("%s(): after buf_clear()", __func__);
 
 	/* cancel scheduled setup */
-	cancel_delayed_work(&priv->delayed_setup_work);
-	cancel_delayed_work(&priv->delayed_write_work);
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&priv->delayed_setup_work);
+	cancel_delayed_work_sync(&priv->delayed_write_work);
 
 	/* shutdown our urbs */
 	dbg("%s(): shutting down urbs", __func__);
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index f5312dd3331..8359ec79895 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -79,7 +79,6 @@ struct ssu100_port_private {
 	u8 shadowLSR;
 	u8 shadowMSR;
 	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
-	unsigned short max_packet_size;
 	struct async_icount icount;
 };
 
@@ -464,36 +463,6 @@ static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
 	return -ENOIOCTLCMD;
 }
 
-static void ssu100_set_max_packet_size(struct usb_serial_port *port)
-{
-	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
-	struct usb_serial *serial = port->serial;
-	struct usb_device *udev = serial->dev;
-
-	struct usb_interface *interface = serial->interface;
-	struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
-
-	unsigned num_endpoints;
-	int i;
-	unsigned long flags;
-
-	num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
-	dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
-
-	for (i = 0; i < num_endpoints; i++) {
-		dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1,
-			interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
-		ep_desc = &interface->cur_altsetting->endpoint[i].desc;
-	}
-
-	/* set max packet size based on descriptor */
-	spin_lock_irqsave(&priv->status_lock, flags);
-	priv->max_packet_size = ep_desc->wMaxPacketSize;
-	spin_unlock_irqrestore(&priv->status_lock, flags);
-
-	dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
-}
-
 static int ssu100_attach(struct usb_serial *serial)
 {
 	struct ssu100_port_private *priv;
@@ -511,7 +480,6 @@ static int ssu100_attach(struct usb_serial *serial)
 	spin_lock_init(&priv->status_lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
 	usb_set_serial_port_data(port, priv);
-	ssu100_set_max_packet_size(port);
 
 	return ssu100_initdevice(serial->dev);
 }
@@ -641,13 +609,14 @@ static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr,
 
 }
 
-static int ssu100_process_packet(struct tty_struct *tty,
-				 struct usb_serial_port *port,
-				 struct ssu100_port_private *priv,
-				 char *packet, int len)
+static int ssu100_process_packet(struct urb *urb,
+				 struct tty_struct *tty)
 {
-	int i;
+	struct usb_serial_port *port = urb->context;
+	char *packet = (char *)urb->transfer_buffer;
 	char flag = TTY_NORMAL;
+	u32 len = urb->actual_length;
+	int i;
 	char *ch;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -685,12 +654,8 @@ static int ssu100_process_packet(struct tty_struct *tty,
 static void ssu100_process_read_urb(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
-	char *data = (char *)urb->transfer_buffer;
 	struct tty_struct *tty;
-	int count = 0;
-	int i;
-	int len;
+	int count;
 
 	dbg("%s", __func__);
 
@@ -698,10 +663,7 @@ static void ssu100_process_read_urb(struct urb *urb)
 	if (!tty)
 		return;
 
-	for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
-		len = min_t(int, urb->actual_length - i, priv->max_packet_size);
-		count += ssu100_process_packet(tty, port, priv, &data[i], len);
-	}
+	count = ssu100_process_packet(urb, tty);
 
 	if (count)
 		tty_flip_buffer_push(tty);
@@ -717,8 +679,6 @@ static struct usb_serial_driver ssu100_device = {
 	.id_table	     = id_table,
 	.usb_driver	     = &ssu100_driver,
 	.num_ports	     = 1,
-	.bulk_in_size        = 256,
-	.bulk_out_size       = 256,
 	.open		     = ssu100_open,
 	.close		     = ssu100_close,
 	.attach              = ssu100_attach,
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 861223f2af6..6954de50c0f 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -51,6 +51,7 @@ static struct usb_driver usb_serial_driver = {
 	.suspend =	usb_serial_suspend,
 	.resume =	usb_serial_resume,
 	.no_dynamic_id = 	1,
+	.supports_autosuspend =	1,
 };
 
 /* There is no MODULE_DEVICE_TABLE for usbserial.c.  Instead
@@ -1343,6 +1344,8 @@ int usb_serial_register(struct usb_serial_driver *driver)
 		return -ENODEV;
 
 	fixup_generic(driver);
+	if (driver->usb_driver)
+		driver->usb_driver->supports_autosuspend = 1;
 
 	if (!driver->description)
 		driver->description = driver->driver.name;
diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h
index 2be298a1305..3ab77c5d981 100644
--- a/drivers/usb/serial/usb-wwan.h
+++ b/drivers/usb/serial/usb-wwan.h
@@ -18,6 +18,8 @@ extern void usb_wwan_set_termios(struct tty_struct *tty,
 extern int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file);
 extern int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
 			     unsigned int set, unsigned int clear);
+extern int usb_wwan_ioctl(struct tty_struct *tty, struct file *file,
+			  unsigned int cmd, unsigned long arg);
 extern int usb_wwan_send_setup(struct usb_serial_port *port);
 extern int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
 			  const unsigned char *buf, int count);
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index fbc94679780..b004b2a485c 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -31,8 +31,10 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/bitops.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/serial.h>
 #include "usb-wwan.h"
 
 static int debug;
@@ -123,6 +125,83 @@ int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
 }
 EXPORT_SYMBOL(usb_wwan_tiocmset);
 
+static int get_serial_info(struct usb_serial_port *port,
+			   struct serial_struct __user *retinfo)
+{
+	struct serial_struct tmp;
+
+	if (!retinfo)
+		return -EFAULT;
+
+	memset(&tmp, 0, sizeof(tmp));
+	tmp.line            = port->serial->minor;
+	tmp.port            = port->number;
+	tmp.baud_base       = tty_get_baud_rate(port->port.tty);
+	tmp.close_delay	    = port->port.close_delay / 10;
+	tmp.closing_wait    = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+				 ASYNC_CLOSING_WAIT_NONE :
+				 port->port.closing_wait / 10;
+
+	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+		return -EFAULT;
+	return 0;
+}
+
+static int set_serial_info(struct usb_serial_port *port,
+			   struct serial_struct __user *newinfo)
+{
+	struct serial_struct new_serial;
+	unsigned int closing_wait, close_delay;
+	int retval = 0;
+
+	if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
+		return -EFAULT;
+
+	close_delay = new_serial.close_delay * 10;
+	closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+			ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+
+	mutex_lock(&port->port.mutex);
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		if ((close_delay != port->port.close_delay) ||
+		    (closing_wait != port->port.closing_wait))
+			retval = -EPERM;
+		else
+			retval = -EOPNOTSUPP;
+	} else {
+		port->port.close_delay  = close_delay;
+		port->port.closing_wait = closing_wait;
+	}
+
+	mutex_unlock(&port->port.mutex);
+	return retval;
+}
+
+int usb_wwan_ioctl(struct tty_struct *tty, struct file *file,
+		   unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dbg("%s cmd 0x%04x", __func__, cmd);
+
+	switch (cmd) {
+	case TIOCGSERIAL:
+		return get_serial_info(port,
+				       (struct serial_struct __user *) arg);
+	case TIOCSSERIAL:
+		return set_serial_info(port,
+				       (struct serial_struct __user *) arg);
+	default:
+		break;
+	}
+
+	dbg("%s arg not supported", __func__);
+
+	return -ENOIOCTLCMD;
+}
+EXPORT_SYMBOL(usb_wwan_ioctl);
+
 /* Write */
 int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
 		   const unsigned char *buf, int count)
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 339fac3949d..23f0dd9c36d 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -49,14 +49,17 @@ struct command_iu {
 	__u8 cdb[16];	/* XXX: Overflow-checking tools may misunderstand */
 };
 
+/*
+ * Also used for the Read Ready and Write Ready IUs since they have the
+ * same first four bytes
+ */
 struct sense_iu {
 	__u8 iu_id;
 	__u8 rsvd1;
 	__be16 tag;
 	__be16 status_qual;
 	__u8 status;
-	__u8 service_response;
-	__u8 rsvd8[6];
+	__u8 rsvd7[7];
 	__be16 len;
 	__u8 sense[SCSI_SENSE_BUFFERSIZE];
 };
@@ -97,8 +100,8 @@ struct uas_dev_info {
 };
 
 enum {
-	ALLOC_SENSE_URB		= (1 << 0),
-	SUBMIT_SENSE_URB	= (1 << 1),
+	ALLOC_STATUS_URB	= (1 << 0),
+	SUBMIT_STATUS_URB	= (1 << 1),
 	ALLOC_DATA_IN_URB	= (1 << 2),
 	SUBMIT_DATA_IN_URB	= (1 << 3),
 	ALLOC_DATA_OUT_URB	= (1 << 4),
@@ -112,7 +115,7 @@ struct uas_cmd_info {
 	unsigned int state;
 	unsigned int stream;
 	struct urb *cmd_urb;
-	struct urb *sense_urb;
+	struct urb *status_urb;
 	struct urb *data_in_urb;
 	struct urb *data_out_urb;
 	struct list_head list;
@@ -138,7 +141,7 @@ static void uas_do_work(struct work_struct *work)
 		struct scsi_pointer *scp = (void *)cmdinfo;
 		struct scsi_cmnd *cmnd = container_of(scp,
 							struct scsi_cmnd, SCp);
-		uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_KERNEL);
+		uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO);
 	}
 }
 
@@ -204,7 +207,7 @@ static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 	int err;
 
-	cmdinfo->state = direction | SUBMIT_SENSE_URB;
+	cmdinfo->state = direction | SUBMIT_STATUS_URB;
 	err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC);
 	if (err) {
 		spin_lock(&uas_work_lock);
@@ -294,7 +297,7 @@ static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 	if (!urb)
 		goto out;
 
-	iu = kmalloc(sizeof(*iu), gfp);
+	iu = kzalloc(sizeof(*iu), gfp);
 	if (!iu)
 		goto free;
 
@@ -325,7 +328,7 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 	if (len < 0)
 		len = 0;
 	len = ALIGN(len, 4);
-	iu = kmalloc(sizeof(*iu) + len, gfp);
+	iu = kzalloc(sizeof(*iu) + len, gfp);
 	if (!iu)
 		goto free;
 
@@ -357,21 +360,21 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 {
 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 
-	if (cmdinfo->state & ALLOC_SENSE_URB) {
-		cmdinfo->sense_urb = uas_alloc_sense_urb(devinfo, gfp, cmnd,
-							cmdinfo->stream);
-		if (!cmdinfo->sense_urb)
+	if (cmdinfo->state & ALLOC_STATUS_URB) {
+		cmdinfo->status_urb = uas_alloc_sense_urb(devinfo, gfp, cmnd,
+							  cmdinfo->stream);
+		if (!cmdinfo->status_urb)
 			return SCSI_MLQUEUE_DEVICE_BUSY;
-		cmdinfo->state &= ~ALLOC_SENSE_URB;
+		cmdinfo->state &= ~ALLOC_STATUS_URB;
 	}
 
-	if (cmdinfo->state & SUBMIT_SENSE_URB) {
-		if (usb_submit_urb(cmdinfo->sense_urb, gfp)) {
+	if (cmdinfo->state & SUBMIT_STATUS_URB) {
+		if (usb_submit_urb(cmdinfo->status_urb, gfp)) {
 			scmd_printk(KERN_INFO, cmnd,
 					"sense urb submission failure\n");
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		}
-		cmdinfo->state &= ~SUBMIT_SENSE_URB;
+		cmdinfo->state &= ~SUBMIT_STATUS_URB;
 	}
 
 	if (cmdinfo->state & ALLOC_DATA_IN_URB) {
@@ -440,7 +443,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 
 	BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer));
 
-	if (!cmdinfo->sense_urb && sdev->current_cmnd)
+	if (!cmdinfo->status_urb && sdev->current_cmnd)
 		return SCSI_MLQUEUE_DEVICE_BUSY;
 
 	if (blk_rq_tagged(cmnd->request)) {
@@ -452,7 +455,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 
 	cmnd->scsi_done = done;
 
-	cmdinfo->state = ALLOC_SENSE_URB | SUBMIT_SENSE_URB |
+	cmdinfo->state = ALLOC_STATUS_URB | SUBMIT_STATUS_URB |
 			ALLOC_CMD_URB | SUBMIT_CMD_URB;
 
 	switch (cmnd->sc_data_direction) {
@@ -475,8 +478,8 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 	err = uas_submit_urbs(cmnd, devinfo, GFP_ATOMIC);
 	if (err) {
 		/* If we did nothing, give up now */
-		if (cmdinfo->state & SUBMIT_SENSE_URB) {
-			usb_free_urb(cmdinfo->sense_urb);
+		if (cmdinfo->state & SUBMIT_STATUS_URB) {
+			usb_free_urb(cmdinfo->status_urb);
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		}
 		spin_lock(&uas_work_lock);
@@ -578,6 +581,34 @@ static struct usb_device_id uas_usb_ids[] = {
 };
 MODULE_DEVICE_TABLE(usb, uas_usb_ids);
 
+static int uas_is_interface(struct usb_host_interface *intf)
+{
+	return (intf->desc.bInterfaceClass == USB_CLASS_MASS_STORAGE &&
+		intf->desc.bInterfaceSubClass == USB_SC_SCSI &&
+		intf->desc.bInterfaceProtocol == USB_PR_UAS);
+}
+
+static int uas_switch_interface(struct usb_device *udev,
+						struct usb_interface *intf)
+{
+	int i;
+
+	if (uas_is_interface(intf->cur_altsetting))
+		return 0;
+
+	for (i = 0; i < intf->num_altsetting; i++) {
+		struct usb_host_interface *alt = &intf->altsetting[i];
+		if (alt == intf->cur_altsetting)
+			continue;
+		if (uas_is_interface(alt))
+			return usb_set_interface(udev,
+						alt->desc.bInterfaceNumber,
+						alt->desc.bAlternateSetting);
+	}
+
+	return -ENODEV;
+}
+
 static void uas_configure_endpoints(struct uas_dev_info *devinfo)
 {
 	struct usb_host_endpoint *eps[4] = { };
@@ -651,13 +682,8 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	struct uas_dev_info *devinfo;
 	struct usb_device *udev = interface_to_usbdev(intf);
 
-	if (id->bInterfaceProtocol == 0x50) {
-		int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
-/* XXX: Shouldn't assume that 1 is the alternative we want */
-		int ret = usb_set_interface(udev, ifnum, 1);
-		if (ret)
-			return -ENODEV;
-	}
+	if (uas_switch_interface(udev, intf))
+		return -ENODEV;
 
 	devinfo = kmalloc(sizeof(struct uas_dev_info), GFP_KERNEL);
 	if (!devinfo)
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 6ccdd3dd525..fcc1e32ce25 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -481,6 +481,13 @@ UNUSUAL_DEV(  0x04e8, 0x507c, 0x0220, 0x0220,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64),
 
+/* Reported by Vitaly Kuznetsov <vitty@altlinux.ru> */
+UNUSUAL_DEV(  0x04e8, 0x5122, 0x0000, 0x9999,
+		"Samsung",
+		"YP-CP3",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 | US_FL_BULK_IGNORE_TAG),
+
 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
  * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
  * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.