summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@suse.de>2011-09-18 01:42:59 -0700
committerGreg Kroah-Hartman <gregkh@suse.de>2011-09-18 01:45:29 -0700
commit073b85469308b41468149f4aa7144c1e1bf4f0d7 (patch)
treeb1ac00c1ccef8ddce2cf167e0a334e0e58eb97fc /drivers/usb
parentb5dd18d8747010e3f3eb1cc76a49f94291938559 (diff)
parent0ae52d5458ddb14d5da63054f1d8269a13fe9054 (diff)
Merge branch 'for-next' of git://gitorious.org/usb/usb into usb-next
* 'for-next' of git://gitorious.org/usb/usb: (47 commits) usb: musb: Enable DMA mode1 RX for transfers without short packets usb: musb: fix build breakage usb: gadget: audio: queue wLength-sized requests usb: gadget: audio: actually support both speeds usb: gadget: storage: make FSG_NUM_BUFFERS variable size USB: gadget: storage: remove alignment assumption usb: gadget: storage: adapt logic block size to bound block devices usb: dwc3: gadget: improve debug on link state change usb: dwc3: omap: set idle and standby modes usb: dwc3: ep0: introduce ep0_expect_in flag usb: dwc3: ep0: giveback requests on stall_and_restart usb: dwc3: gadget: drop the useless dma_sync_single* calls usb: dwc3: gadget: fix GCTL programming usb: dwc3: define ScaleDown macro helper usb: dwc3: Fix definition of DWC3_GCTL_U2RSTECN usb: dwc3: gadget: do not map/unmap ZLP transfers usb: dwc3: omap: fix IRQ handling usb: dwc3: omap: change IRQ name to dwc3-omap usb: dwc3: add module.h to dwc3-omap.c and core.c usb: dwc3: omap: distinguish between SW and HW modes ...
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/dwc3/core.c20
-rw-r--r--drivers/usb/dwc3/core.h58
-rw-r--r--drivers/usb/dwc3/debugfs.c92
-rw-r--r--drivers/usb/dwc3/dwc3-omap.c155
-rw-r--r--drivers/usb/dwc3/ep0.c412
-rw-r--r--drivers/usb/dwc3/gadget.c141
-rw-r--r--drivers/usb/gadget/Kconfig16
-rw-r--r--drivers/usb/gadget/f_audio.c15
-rw-r--r--drivers/usb/gadget/f_mass_storage.c153
-rw-r--r--drivers/usb/gadget/file_storage.c142
-rw-r--r--drivers/usb/gadget/storage_common.c56
-rw-r--r--drivers/usb/musb/musb_gadget.c69
12 files changed, 688 insertions, 641 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 443e4fb9b8f..64ba0979a34 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -37,6 +37,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -241,6 +242,15 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
u32 reg;
int ret;
+ reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
+ /* This should read as U3 followed by revision number */
+ if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) {
+ dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
+ ret = -ENODEV;
+ goto err0;
+ }
+ dwc->revision = reg & DWC3_GSNPSREV_MASK;
+
dwc3_core_soft_reset(dwc);
/* issue device SoftReset too */
@@ -260,16 +270,6 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc)
cpu_relax();
} while (true);
- reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
- /* This should read as U3 followed by revision number */
- if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) {
- dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
- ret = -ENODEV;
- goto err0;
- }
-
- dwc->revision = reg & DWC3_GSNPSREV_MASK;
-
ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_NUM,
DWC3_EVENT_BUFFERS_SIZE);
if (ret) {
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 83b2960cccd..07d20186e46 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -147,7 +147,7 @@
/* Global Configuration Register */
#define DWC3_GCTL_PWRDNSCALE(n) (n << 19)
-#define DWC3_GCTL_U2RSTECN 16
+#define DWC3_GCTL_U2RSTECN (1 << 16)
#define DWC3_GCTL_RAMCLKSEL(x) ((x & DWC3_GCTL_CLK_MASK) << 6)
#define DWC3_GCTL_CLK_BUS (0)
#define DWC3_GCTL_CLK_PIPE (1)
@@ -160,6 +160,7 @@
#define DWC3_GCTL_PRTCAP_OTG 3
#define DWC3_GCTL_CORESOFTRESET (1 << 11)
+#define DWC3_GCTL_SCALEDOWN(n) (n << 4)
#define DWC3_GCTL_DISSCRAMBLE (1 << 3)
/* Global USB2 PHY Configuration Register */
@@ -348,7 +349,9 @@ struct dwc3_ep {
#define DWC3_EP_WEDGE (1 << 2)
#define DWC3_EP_BUSY (1 << 4)
#define DWC3_EP_PENDING_REQUEST (1 << 5)
-#define DWC3_EP_WILL_SHUTDOWN (1 << 6)
+
+ /* This last one is specific to EP0 */
+#define DWC3_EP0_DIR_IN (1 << 31)
unsigned current_trb;
@@ -368,18 +371,19 @@ enum dwc3_phy {
DWC3_PHY_USB2,
};
+enum dwc3_ep0_next {
+ DWC3_EP0_UNKNOWN = 0,
+ DWC3_EP0_COMPLETE,
+ DWC3_EP0_NRDY_SETUP,
+ DWC3_EP0_NRDY_DATA,
+ DWC3_EP0_NRDY_STATUS,
+};
+
enum dwc3_ep0_state {
EP0_UNCONNECTED = 0,
- EP0_IDLE,
- EP0_IN_DATA_PHASE,
- EP0_OUT_DATA_PHASE,
- EP0_IN_WAIT_GADGET,
- EP0_OUT_WAIT_GADGET,
- EP0_IN_WAIT_NRDY,
- EP0_OUT_WAIT_NRDY,
- EP0_IN_STATUS_PHASE,
- EP0_OUT_STATUS_PHASE,
- EP0_STALL,
+ EP0_SETUP_PHASE,
+ EP0_DATA_PHASE,
+ EP0_STATUS_PHASE,
};
enum dwc3_link_state {
@@ -503,13 +507,15 @@ static inline void dwc3_trb_to_nat(struct dwc3_trb_hw *hw, struct dwc3_trb *nat)
/**
* struct dwc3 - representation of our controller
- * ctrl_req: usb control request which is used for ep0
- * ep0_trb: trb which is used for the ctrl_req
- * setup_buf: used while precessing STD USB requests
- * ctrl_req_addr: dma address of ctrl_req
- * ep0_trb: dma address of ep0_trb
- * ep0_usb_req: dummy req used while handling STD USB requests
- * setup_buf_addr: dma address of setup_buf
+ * @ctrl_req: usb control request which is used for ep0
+ * @ep0_trb: trb which is used for the ctrl_req
+ * @ep0_bounce: bounce buffer for ep0
+ * @setup_buf: used while precessing STD USB requests
+ * @ctrl_req_addr: dma address of ctrl_req
+ * @ep0_trb: dma address of ep0_trb
+ * @ep0_usb_req: dummy req used while handling STD USB requests
+ * @setup_buf_addr: dma address of setup_buf
+ * @ep0_bounce_addr: dma address of ep0_bounce
* @lock: for synchronizing
* @dev: pointer to our struct device
* @event_buffer_list: a list of event buffers
@@ -522,6 +528,9 @@ static inline void dwc3_trb_to_nat(struct dwc3_trb_hw *hw, struct dwc3_trb *nat)
* @is_selfpowered: true when we are selfpowered
* @three_stage_setup: set if we perform a three phase setup
* @ep0_status_pending: ep0 status response without a req is pending
+ * @ep0_bounced: true when we used bounce buffer
+ * @ep0_expect_in: true when we expect a DATA IN transfer
+ * @ep0_next_event: hold the next expected event
* @ep0state: state of endpoint zero
* @link_state: link state
* @speed: device speed (super, high, full, low)
@@ -531,10 +540,12 @@ static inline void dwc3_trb_to_nat(struct dwc3_trb_hw *hw, struct dwc3_trb *nat)
struct dwc3 {
struct usb_ctrlrequest *ctrl_req;
struct dwc3_trb_hw *ep0_trb;
+ void *ep0_bounce;
u8 *setup_buf;
dma_addr_t ctrl_req_addr;
dma_addr_t ep0_trb_addr;
dma_addr_t setup_buf_addr;
+ dma_addr_t ep0_bounce_addr;
struct usb_request ep0_usb_req;
/* device lock */
spinlock_t lock;
@@ -564,7 +575,10 @@ struct dwc3 {
unsigned is_selfpowered:1;
unsigned three_stage_setup:1;
unsigned ep0_status_pending:1;
+ unsigned ep0_bounced:1;
+ unsigned ep0_expect_in:1;
+ enum dwc3_ep0_next ep0_next_event;
enum dwc3_ep0_state ep0state;
enum dwc3_link_state link_state;
enum dwc3_device_state dev_state;
@@ -634,6 +648,12 @@ struct dwc3_event_depevt {
#define DEPEVT_STATUS_SHORT (1 << 1)
#define DEPEVT_STATUS_IOC (1 << 2)
#define DEPEVT_STATUS_LST (1 << 3)
+
+/* Control-only Status */
+#define DEPEVT_STATUS_CONTROL_SETUP 0
+#define DEPEVT_STATUS_CONTROL_DATA 1
+#define DEPEVT_STATUS_CONTROL_STATUS 2
+
u32 parameters:16;
} __packed;
diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c
index 432df539372..20d329f2340 100644
--- a/drivers/usb/dwc3/debugfs.c
+++ b/drivers/usb/dwc3/debugfs.c
@@ -406,91 +406,6 @@ static const struct file_operations dwc3_regdump_fops = {
.release = single_release,
};
-
-static int dwc3_send_testmode_cmd(struct dwc3 *dwc, int mode)
-{
- u32 timeout = 250;
-
- dwc3_writel(dwc->regs, DWC3_DGCMDPAR, mode);
- dwc3_writel(dwc->regs, DWC3_DGCMD, DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK |
- DWC3_DEPCMD_CMDACT);
- do {
- u32 reg;
-
- reg = dwc3_readl(dwc->regs, DWC3_DGCMD);
- if (!(reg & DWC3_DEPCMD_CMDACT))
- return 0;
- timeout--;
- if (!timeout)
- return -ETIMEDOUT;
- mdelay(1);
- } while (1);
-}
-
-static struct dwc3_trb_hw trb_0 __aligned(16);
-static struct dwc3_trb_hw trb_1 __aligned(16);
-
-#define BUF_SIZE 4096
-static int dwc3_testmode_open(struct inode *inode, struct file *file)
-{
- struct dwc3 *dwc = inode->i_private;
- struct dwc3_gadget_ep_cmd_params par0;
- struct dwc3_gadget_ep_cmd_params par1;
- struct dwc3_trb trb;
- int ret;
- u8 *buf0;
- u8 *buf1;
-
- buf0 = kmalloc(BUF_SIZE, GFP_KERNEL);
- if (!buf0)
- return -ENOMEM;
- buf1 = kmalloc(BUF_SIZE, GFP_KERNEL);
- if (!buf1)
- return -ENOMEM;
-
- memset(buf0, 0xaa, BUF_SIZE);
- memset(buf1, 0x33, BUF_SIZE);
-
- memset(&trb, 0, sizeof(trb));
- memset(&par0, 0, sizeof(par0));
- memset(&par1, 0, sizeof(par1));
-
- trb.lst = 1;
- trb.trbctl = DWC3_TRBCTL_NORMAL;
- trb.length = BUF_SIZE;
- trb.hwo = 1;
-
- trb.bplh = virt_to_phys(buf0);
- dwc3_trb_to_hw(&trb, &trb_0);
-
- trb.bplh = virt_to_phys(buf1);
- dwc3_trb_to_hw(&trb, &trb_1);
-
- par0.param0.depstrtxfer.transfer_desc_addr_high =
- upper_32_bits(virt_to_phys(&trb_0));
- par0.param1.depstrtxfer.transfer_desc_addr_low =
- lower_32_bits(virt_to_phys(&trb_0));
-
- par1.param0.depstrtxfer.transfer_desc_addr_high =
- upper_32_bits(virt_to_phys(&trb_1));
- par1.param1.depstrtxfer.transfer_desc_addr_low =
- lower_32_bits(virt_to_phys(&trb_1));
-
- dwc3_send_testmode_cmd(dwc, 1);
-
- ret = dwc3_send_gadget_ep_cmd(dwc, 0, DWC3_DEPCMD_STARTTRANSFER, &par0);
- ret = dwc3_send_gadget_ep_cmd(dwc, 1, DWC3_DEPCMD_STARTTRANSFER, &par1);
-
- dwc3_send_testmode_cmd(dwc, 0);
- return -EBUSY;
-}
-
-static const struct file_operations dwc3_testmode_fops = {
- .open = dwc3_testmode_open,
- .read = seq_read,
- .release = single_release,
-};
-
int __devinit dwc3_debugfs_init(struct dwc3 *dwc)
{
struct dentry *root;
@@ -511,13 +426,6 @@ int __devinit dwc3_debugfs_init(struct dwc3 *dwc)
ret = PTR_ERR(file);
goto err1;
}
- file = debugfs_create_file("testmode", S_IRUGO, root, dwc,
- &dwc3_testmode_fops);
- if (IS_ERR(file)) {
- ret = PTR_ERR(file);
- goto err1;
- }
-
return 0;
err1:
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 08fffe6d1a9..72cc92b3da0 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -37,11 +37,13 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/dwc3-omap.h>
#include <linux/dma-mapping.h>
#include <linux/ioport.h>
#include <linux/io.h>
@@ -74,8 +76,23 @@
/* SYSCONFIG REGISTER */
#define USBOTGSS_SYSCONFIG_DMADISABLE (1 << 16)
#define USBOTGSS_SYSCONFIG_STANDBYMODE(x) ((x) << 4)
+
+#define USBOTGSS_STANDBYMODE_FORCE_STANDBY 0
+#define USBOTGSS_STANDBYMODE_NO_STANDBY 1
+#define USBOTGSS_STANDBYMODE_SMART_STANDBY 2
+#define USBOTGSS_STANDBYMODE_SMART_WAKEUP 3
+
+#define USBOTGSS_STANDBYMODE_MASK (0x03 << 4)
+
#define USBOTGSS_SYSCONFIG_IDLEMODE(x) ((x) << 2)
+#define USBOTGSS_IDLEMODE_FORCE_IDLE 0
+#define USBOTGSS_IDLEMODE_NO_IDLE 1
+#define USBOTGSS_IDLEMODE_SMART_IDLE 2
+#define USBOTGSS_IDLEMODE_SMART_WAKEUP 3
+
+#define USBOTGSS_IDLEMODE_MASK (0x03 << 2)
+
/* IRQ_EOI REGISTER */
#define USBOTGSS_IRQ_EOI_LINE_NUMBER (1 << 0)
@@ -125,106 +142,51 @@ struct dwc3_omap {
u32 dma_status:1;
};
-#ifdef CONFIG_PM
-static int dwc3_omap_suspend(struct device *dev)
-{
- struct dwc3_omap *omap = dev_get_drvdata(dev);
-
- memcpy_fromio(omap->context, omap->base, omap->resource_size);
-
- return 0;
-}
-
-static int dwc3_omap_resume(struct device *dev)
-{
- struct dwc3_omap *omap = dev_get_drvdata(dev);
-
- memcpy_toio(omap->base, omap->context, omap->resource_size);
-
- return 0;
-}
-
-static int dwc3_omap_idle(struct device *dev)
-{
- struct dwc3_omap *omap = dev_get_drvdata(dev);
- u32 reg;
-
- /* stop DMA Engine */
- reg = dwc3_readl(omap->base, USBOTGSS_SYSCONFIG);
- reg &= ~(USBOTGSS_SYSCONFIG_DMADISABLE);
- dwc3_writel(omap->base, USBOTGSS_SYSCONFIG, reg);
-
- return 0;
-}
-
-static UNIVERSAL_DEV_PM_OPS(dwc3_omap_pm_ops, dwc3_omap_suspend,
- dwc3_omap_resume, dwc3_omap_idle);
-
-#define DEV_PM_OPS (&dwc3_omap_pm_ops)
-#else
-#define DEV_PM_OPS NULL
-#endif
-
static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
{
struct dwc3_omap *omap = _omap;
u32 reg;
- u32 ctrl;
spin_lock(&omap->lock);
reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_1);
- ctrl = dwc3_readl(omap->base, USBOTGSS_UTMI_OTG_CTRL);
if (reg & USBOTGSS_IRQ1_DMADISABLECLR) {
- dev_dbg(omap->base, "DMA Disable was Cleared\n");
+ dev_dbg(omap->dev, "DMA Disable was Cleared\n");
omap->dma_status = false;
}
if (reg & USBOTGSS_IRQ1_OEVT)
- dev_dbg(omap->base, "OTG Event\n");
+ dev_dbg(omap->dev, "OTG Event\n");
- if (reg & USBOTGSS_IRQ1_DRVVBUS_RISE) {
- dev_dbg(omap->base, "DRVVBUS Rise\n");
- ctrl |= USBOTGSS_UTMI_OTG_CTRL_DRVVBUS;
- }
+ if (reg & USBOTGSS_IRQ1_DRVVBUS_RISE)
+ dev_dbg(omap->dev, "DRVVBUS Rise\n");
- if (reg & USBOTGSS_IRQ1_CHRGVBUS_RISE) {
- dev_dbg(omap->base, "CHRGVBUS Rise\n");
- ctrl |= USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS;
- }
+ if (reg & USBOTGSS_IRQ1_CHRGVBUS_RISE)
+ dev_dbg(omap->dev, "CHRGVBUS Rise\n");
- if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_RISE) {
- dev_dbg(omap->base, "DISCHRGVBUS Rise\n");
- ctrl |= USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS;
- }
+ if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_RISE)
+ dev_dbg(omap->dev, "DISCHRGVBUS Rise\n");
- if (reg & USBOTGSS_IRQ1_IDPULLUP_RISE) {
- dev_dbg(omap->base, "IDPULLUP Rise\n");
- ctrl |= USBOTGSS_UTMI_OTG_CTRL_IDPULLUP;
- }
+ if (reg & USBOTGSS_IRQ1_IDPULLUP_RISE)
+ dev_dbg(omap->dev, "IDPULLUP Rise\n");
- if (reg & USBOTGSS_IRQ1_DRVVBUS_FALL) {
- dev_dbg(omap->base, "DRVVBUS Fall\n");
- ctrl &= ~USBOTGSS_UTMI_OTG_CTRL_DRVVBUS;
- }
+ if (reg & USBOTGSS_IRQ1_DRVVBUS_FALL)
+ dev_dbg(omap->dev, "DRVVBUS Fall\n");
- if (reg & USBOTGSS_IRQ1_CHRGVBUS_FALL) {
- dev_dbg(omap->base, "CHRGVBUS Fall\n");
- ctrl &= ~USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS;
- }
+ if (reg & USBOTGSS_IRQ1_CHRGVBUS_FALL)
+ dev_dbg(omap->dev, "CHRGVBUS Fall\n");
- if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_FALL) {
- dev_dbg(omap->base, "DISCHRGVBUS Fall\n");
- ctrl &= ~USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS;
- }
+ if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_FALL)
+ dev_dbg(omap->dev, "DISCHRGVBUS Fall\n");
- if (reg & USBOTGSS_IRQ1_IDPULLUP_FALL) {
- dev_dbg(omap->base, "IDPULLUP Fall\n");
- ctrl &= ~USBOTGSS_UTMI_OTG_CTRL_IDPULLUP;
- }
+ if (reg & USBOTGSS_IRQ1_IDPULLUP_FALL)
+ dev_dbg(omap->dev, "IDPULLUP Fall\n");
- dwc3_writel(omap->base, USBOTGSS_UTMI_OTG_CTRL, ctrl);
+ dwc3_writel(omap->base, USBOTGSS_IRQSTATUS_1, reg);
+
+ reg = dwc3_readl(omap->base, USBOTGSS_IRQSTATUS_0);
+ dwc3_writel(omap->base, USBOTGSS_IRQSTATUS_0, reg);
spin_unlock(&omap->lock);
@@ -233,6 +195,7 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
static int __devinit dwc3_omap_probe(struct platform_device *pdev)
{
+ struct dwc3_omap_data *pdata = pdev->dev.platform_data;
struct platform_device *dwc3;
struct dwc3_omap *omap;
struct resource *res;
@@ -298,12 +261,41 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
omap->base = base;
omap->dwc3 = dwc3;
+ reg = dwc3_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
+
+ if (!pdata) {
+ dev_dbg(&pdev->dev, "missing platform data\n");
+ } else {
+ switch (pdata->utmi_mode) {
+ case DWC3_OMAP_UTMI_MODE_SW:
+ reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
+ break;
+ case DWC3_OMAP_UTMI_MODE_HW:
+ reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
+ break;
+ default:
+ dev_dbg(&pdev->dev, "UNKNOWN utmi mode %d\n",
+ pdata->utmi_mode);
+ }
+ }
+
+ dwc3_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg);
+
/* check the DMA Status */
reg = dwc3_readl(omap->base, USBOTGSS_SYSCONFIG);
omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE);
+ /* Set No-Idle and No-Standby */
+ reg &= ~(USBOTGSS_STANDBYMODE_MASK
+ | USBOTGSS_IDLEMODE_MASK);
+
+ reg |= (USBOTGSS_SYSCONFIG_STANDBYMODE(USBOTGSS_STANDBYMODE_NO_STANDBY)
+ | USBOTGSS_SYSCONFIG_IDLEMODE(USBOTGSS_IDLEMODE_NO_IDLE));
+
+ dwc3_writel(omap->base, USBOTGSS_SYSCONFIG, reg);
+
ret = request_irq(omap->irq, dwc3_omap_interrupt, 0,
- "dwc3-wrapper", omap);
+ "dwc3-omap", omap);
if (ret) {
dev_err(&pdev->dev, "failed to request IRQ #%d --> %d\n",
omap->irq, ret);
@@ -311,10 +303,10 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
}
/* enable all IRQs */
- dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, 0x01);
+ reg = USBOTGSS_IRQO_COREIRQ_ST;
+ dwc3_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg);
- reg = (USBOTGSS_IRQ1_DMADISABLECLR |
- USBOTGSS_IRQ1_OEVT |
+ reg = (USBOTGSS_IRQ1_OEVT |
USBOTGSS_IRQ1_DRVVBUS_RISE |
USBOTGSS_IRQ1_CHRGVBUS_RISE |
USBOTGSS_IRQ1_DISCHRGVBUS_RISE |
@@ -388,7 +380,6 @@ static struct platform_driver dwc3_omap_driver = {
.remove = __devexit_p(dwc3_omap_remove),
.driver = {
.name = "omap-dwc3",
- .pm = DEV_PM_OPS,
.of_match_table = of_dwc3_matach,
},
};
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 4698fe01376..b66d9690572 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -62,33 +62,19 @@ static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
switch (state) {
case EP0_UNCONNECTED:
return "Unconnected";
- case EP0_IDLE:
- return "Idle";
- case EP0_IN_DATA_PHASE:
- return "IN Data Phase";
- case EP0_OUT_DATA_PHASE:
- return "OUT Data Phase";
- case EP0_IN_WAIT_GADGET:
- return "IN Wait Gadget";
- case EP0_OUT_WAIT_GADGET:
- return "OUT Wait Gadget";
- case EP0_IN_WAIT_NRDY:
- return "IN Wait NRDY";
- case EP0_OUT_WAIT_NRDY:
- return "OUT Wait NRDY";
- case EP0_IN_STATUS_PHASE:
- return "IN Status Phase";
- case EP0_OUT_STATUS_PHASE:
- return "OUT Status Phase";
- case EP0_STALL:
- return "Stall";
+ case EP0_SETUP_PHASE:
+ return "Setup Phase";
+ case EP0_DATA_PHASE:
+ return "Data Phase";
+ case EP0_STATUS_PHASE:
+ return "Status Phase";
default:
return "UNKNOWN";
}
}
static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
- u32 len)
+ u32 len, u32 type)
{
struct dwc3_gadget_ep_cmd_params params;
struct dwc3_trb_hw *trb_hw;
@@ -98,52 +84,15 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
int ret;
dep = dwc->eps[epnum];
+ if (dep->flags & DWC3_EP_BUSY) {
+ dev_vdbg(dwc->dev, "%s: still busy\n", dep->name);
+ return 0;
+ }
trb_hw = dwc->ep0_trb;
memset(&trb, 0, sizeof(trb));
- switch (dwc->ep0state) {
- case EP0_IDLE:
- trb.trbctl = DWC3_TRBCTL_CONTROL_SETUP;
- break;
-
- case EP0_IN_WAIT_NRDY:
- case EP0_OUT_WAIT_NRDY:
- case EP0_IN_STATUS_PHASE:
- case EP0_OUT_STATUS_PHASE:
- if (dwc->three_stage_setup)
- trb.trbctl = DWC3_TRBCTL_CONTROL_STATUS3;
- else
- trb.trbctl = DWC3_TRBCTL_CONTROL_STATUS2;
-
- if (dwc->ep0state == EP0_IN_WAIT_NRDY)
- dwc->ep0state = EP0_IN_STATUS_PHASE;
- else if (dwc->ep0state == EP0_OUT_WAIT_NRDY)
- dwc->ep0state = EP0_OUT_STATUS_PHASE;
- break;
-
- case EP0_IN_WAIT_GADGET:
- dwc->ep0state = EP0_IN_WAIT_NRDY;
- return 0;
- break;
-
- case EP0_OUT_WAIT_GADGET:
- dwc->ep0state = EP0_OUT_WAIT_NRDY;
- return 0;
-
- break;
-
- case EP0_IN_DATA_PHASE:
- case EP0_OUT_DATA_PHASE:
- trb.trbctl = DWC3_TRBCTL_CONTROL_DATA;
- break;
-
- default:
- dev_err(dwc->dev, "%s() can't in state %d\n", __func__,
- dwc->ep0state);
- return -EINVAL;
- }
-
+ trb.trbctl = type;
trb.bplh = buf_dma;
trb.length = len;
@@ -167,31 +116,58 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
return ret;
}
+ dep->flags |= DWC3_EP_BUSY;
dep->res_trans_idx = dwc3_gadget_ep_get_transfer_index(dwc,
dep->number);
+ dwc->ep0_next_event = DWC3_EP0_COMPLETE;
+
return 0;
}
static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
struct dwc3_request *req)
{
- struct dwc3 *dwc = dep->dwc;
- int ret;
+ int ret = 0;
req->request.actual = 0;
req->request.status = -EINPROGRESS;
- req->direction = dep->direction;
req->epnum = dep->number;
list_add_tail(&req->list, &dep->request_list);
- dwc3_map_buffer_to_dma(req);
- ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma,
- req->request.length);
- if (ret < 0) {
- list_del(&req->list);
- dwc3_unmap_buffer_from_dma(req);
+ /*
+ * Gadget driver might not be quick enough to queue a request
+ * before we get a Transfer Not Ready event on this endpoint.
+ *
+ * In that case, we will set DWC3_EP_PENDING_REQUEST. When that
+ * flag is set, it's telling us that as soon as Gadget queues the
+ * required request, we should kick the transfer here because the
+ * IRQ we were waiting for is long gone.
+ */
+ if (dep->flags & DWC3_EP_PENDING_REQUEST) {
+ struct dwc3 *dwc = dep->dwc;
+ unsigned direction;
+ u32 type;
+
+ direction = !!(dep->flags & DWC3_EP0_DIR_IN);
+
+ if (dwc->ep0state == EP0_STATUS_PHASE) {
+ type = dwc->three_stage_setup
+ ? DWC3_TRBCTL_CONTROL_STATUS3
+ : DWC3_TRBCTL_CONTROL_STATUS2;
+ } else if (dwc->ep0state == EP0_DATA_PHASE) {
+ type = DWC3_TRBCTL_CONTROL_DATA;
+ } else {
+ /* should never happen */
+ WARN_ON(1);
+ return 0;
+ }
+
+ ret = dwc3_ep0_start_trans(dwc, direction,
+ req->request.dma, req->request.length, type);
+ dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
+ DWC3_EP0_DIR_IN);
}
return ret;
@@ -208,24 +184,6 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
int ret;
- switch (dwc->ep0state) {
- case EP0_IN_DATA_PHASE:
- case EP0_IN_WAIT_GADGET:
- case EP0_IN_WAIT_NRDY:
- case EP0_IN_STATUS_PHASE:
- dep = dwc->eps[1];
- break;
-
- case EP0_OUT_DATA_PHASE:
- case EP0_OUT_WAIT_GADGET:
- case EP0_OUT_WAIT_NRDY:
- case EP0_OUT_STATUS_PHASE:
- dep = dwc->eps[0];
- break;
- default:
- return -EINVAL;
- }
-
spin_lock_irqsave(&dwc->lock, flags);
if (!dep->desc) {
dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
@@ -256,51 +214,30 @@ out:
static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
{
+ struct dwc3_ep *dep = dwc->eps[0];
+
/* stall is always issued on EP0 */
__dwc3_gadget_ep_set_halt(dwc->eps[0], 1);
- dwc->eps[0]->flags &= ~DWC3_EP_STALL;
- dwc->ep0state = EP0_IDLE;
- dwc3_ep0_out_start(dwc);
-}
+ dwc->eps[0]->flags = DWC3_EP_ENABLED;
-void dwc3_ep0_out_start(struct dwc3 *dwc)
-{
- struct dwc3_ep *dep;
- int ret;
+ if (!list_empty(&dep->request_list)) {
+ struct dwc3_request *req;
- dep = dwc->eps[0];
+ req = next_request(&dep->request_list);
+ dwc3_gadget_giveback(dep, req, -ECONNRESET);
+ }
- ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8);
- WARN_ON(ret < 0);
+ dwc->ep0state = EP0_SETUP_PHASE;
+ dwc3_ep0_out_start(dwc);
}
-/*
- * Send a zero length packet for the status phase of the control transfer
- */
-static void dwc3_ep0_do_setup_status(struct dwc3 *dwc,
- const struct dwc3_event_depevt *event)
+void dwc3_ep0_out_start(struct dwc3 *dwc)
{
- struct dwc3_ep *dep;
int ret;
- u32 epnum;
-
- epnum = event->endpoint_number;
- dep = dwc->eps[epnum];
- if (epnum)
- dwc->ep0state = EP0_IN_STATUS_PHASE;
- else
- dwc->ep0state = EP0_OUT_STATUS_PHASE;
-
- /*
- * Not sure Why I need a buffer for a zero transfer. Maybe the
- * HW reacts strange on a NULL pointer
- */
- ret = dwc3_ep0_start_trans(dwc, epnum, dwc->ctrl_req_addr, 0);
- if (ret) {
- dev_dbg(dwc->dev, "failed to start transfer, stalling\n");
- dwc3_ep0_stall_and_restart(dwc);
- }
+ ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8,
+ DWC3_TRBCTL_CONTROL_SETUP);
+ WARN_ON(ret < 0);
}
static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
@@ -322,16 +259,9 @@ static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
static void dwc3_ep0_send_status_response(struct dwc3 *dwc)
{
- u32 epnum;
-
- if (dwc->ep0state == EP0_IN_DATA_PHASE)
- epnum = 1;
- else
- epnum = 0;
-
- dwc3_ep0_start_trans(dwc, epnum, dwc->ctrl_req_addr,
- dwc->ep0_usb_req.length);
- dwc->ep0_status_pending = 1;
+ dwc3_ep0_start_trans(dwc, 1, dwc->setup_buf_addr,
+ dwc->ep0_usb_req.length,
+ DWC3_TRBCTL_CONTROL_DATA);
}
/*
@@ -376,7 +306,7 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl
response_pkt = (__le16 *) dwc->setup_buf;
*response_pkt = cpu_to_le16(usb_status);
dwc->ep0_usb_req.length = sizeof(*response_pkt);
- dwc3_ep0_send_status_response(dwc);
+ dwc->ep0_status_pending = 1;
return 0;
}
@@ -486,8 +416,6 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
return -EINVAL;
};
- dwc->ep0state = EP0_IN_WAIT_NRDY;
-
return 0;
}
@@ -522,7 +450,7 @@ static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
ret = -EINVAL;
break;
}
- dwc->ep0state = EP0_IN_WAIT_NRDY;
+
return ret;
}
@@ -610,16 +538,15 @@ static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
len = le16_to_cpu(ctrl->wLength);
if (!len) {
- dwc->ep0state = EP0_IN_WAIT_GADGET;
dwc->three_stage_setup = 0;
+ dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
} else {
dwc->three_stage_setup = 1;
- if (ctrl->bRequestType & USB_DIR_IN)
- dwc->ep0state = EP0_IN_DATA_PHASE;
- else
- dwc->ep0state = EP0_OUT_DATA_PHASE;
+ dwc->ep0_next_event = DWC3_EP0_NRDY_DATA;
}
+ dwc->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN);
+
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
ret = dwc3_ep0_std_request(dwc, ctrl);
else
@@ -639,14 +566,16 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
struct usb_request *ur;
struct dwc3_trb trb;
struct dwc3_ep *dep;
- u32 transfered;
+ u32 transferred;
u8 epnum;
epnum = event->endpoint_number;
dep = dwc->eps[epnum];
+ dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
+
if (!dwc->ep0_status_pending) {
- r = next_request(&dep->request_list);
+ r = next_request(&dwc->eps[0]->request_list);
ur = &r->request;
} else {
ur = &dwc->ep0_usb_req;
@@ -655,8 +584,17 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
dwc3_trb_to_nat(dwc->ep0_trb, &trb);
- transfered = ur->length - trb.length;
- ur->actual += transfered;
+ if (dwc->ep0_bounced) {
+ struct dwc3_ep *ep0 = dwc->eps[0];
+
+ transferred = min_t(u32, ur->length,
+ ep0->endpoint.maxpacket - trb.length);
+ memcpy(ur->buf, dwc->ep0_bounce, transferred);
+ dwc->ep0_bounced = false;
+ } else {
+ transferred = ur->length - trb.length;
+ ur->actual += transferred;
+ }
if ((epnum & 1) && ur->actual < ur->length) {
/* for some reason we did not get everything out */
@@ -668,12 +606,6 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
* handle the case where we have to send a zero packet. This
* seems to be case when req.length > maxpacket. Could it be?
*/
- /* The transfer is complete, wait for HOST */
- if (epnum & 1)
- dwc->ep0state = EP0_IN_WAIT_NRDY;
- else
- dwc->ep0state = EP0_OUT_WAIT_NRDY;
-
if (r)
dwc3_gadget_giveback(dep, r, 0);
}
@@ -684,10 +616,8 @@ static void dwc3_ep0_complete_req(struct dwc3 *dwc,
{
struct dwc3_request *r;
struct dwc3_ep *dep;
- u8 epnum;
- epnum = event->endpoint_number;
- dep = dwc->eps[epnum];
+ dep = dwc->eps[0];
if (!list_empty(&dep->request_list)) {
r = next_request(&dep->request_list);
@@ -695,62 +625,170 @@ static void dwc3_ep0_complete_req(struct dwc3 *dwc,
dwc3_gadget_giveback(dep, r, 0);
}
- dwc->ep0state = EP0_IDLE;
+ dwc->ep0state = EP0_SETUP_PHASE;
dwc3_ep0_out_start(dwc);
}
static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
+ struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
+
+ dep->flags &= ~DWC3_EP_BUSY;
+
switch (dwc->ep0state) {
- case EP0_IDLE:
+ case EP0_SETUP_PHASE:
+ dev_vdbg(dwc->dev, "Inspecting Setup Bytes\n");
dwc3_ep0_inspect_setup(dwc, event);
break;
- case EP0_IN_DATA_PHASE:
- case EP0_OUT_DATA_PHASE:
+ case EP0_DATA_PHASE:
+ dev_vdbg(dwc->dev, "Data Phase\n");
dwc3_ep0_complete_data(dwc, event);
break;
- case EP0_IN_STATUS_PHASE:
- case EP0_OUT_STATUS_PHASE:
+ case EP0_STATUS_PHASE:
+ dev_vdbg(dwc->dev, "Status Phase\n");
dwc3_ep0_complete_req(dwc, event);
break;
+ default:
+ WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state);
+ }
+}
- case EP0_IN_WAIT_NRDY:
- case EP0_OUT_WAIT_NRDY:
- case EP0_IN_WAIT_GADGET:
- case EP0_OUT_WAIT_GADGET:
- case EP0_UNCONNECTED:
- case EP0_STALL:
- break;
+static void dwc3_ep0_do_control_setup(struct dwc3 *dwc,
+ const struct dwc3_event_depevt *event)
+{
+ dwc->ep0state = EP0_SETUP_PHASE;
+ dwc3_ep0_out_start(dwc);
+}
+
+static void dwc3_ep0_do_control_data(struct dwc3 *dwc,
+ const struct dwc3_event_depevt *event)
+{
+ struct dwc3_ep *dep;
+ struct dwc3_request *req;
+ int ret;
+
+ dep = dwc->eps[0];
+ dwc->ep0state = EP0_DATA_PHASE;
+
+ if (dwc->ep0_status_pending) {
+ dwc3_ep0_send_status_response(dwc);
+ return;
+ }
+
+ if (list_empty(&dep->request_list)) {
+ dev_vdbg(dwc->dev, "pending request for EP0 Data phase\n");
+ dep->flags |= DWC3_EP_PENDING_REQUEST;
+
+ if (event->endpoint_number)
+ dep->flags |= DWC3_EP0_DIR_IN;
+ return;
+ }
+
+ req = next_request(&dep->request_list);
+ req->direction = !!event->endpoint_number;
+
+ dwc->ep0state = EP0_DATA_PHASE;
+ if (req->request.length == 0) {
+ ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
+ dwc->ctrl_req_addr, 0,
+ DWC3_TRBCTL_CONTROL_DATA);
+ } else if ((req->request.length % dep->endpoint.maxpacket)
+ && (event->endpoint_number == 0)) {
+ dwc3_map_buffer_to_dma(req);
+
+ WARN_ON(req->request.length > dep->endpoint.maxpacket);
+
+ dwc->ep0_bounced = true;
+
+ /*
+ * REVISIT in case request length is bigger than EP0
+ * wMaxPacketSize, we will need two chained TRBs to handle
+ * the transfer.
+ */
+ ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
+ dwc->ep0_bounce_addr, dep->endpoint.maxpacket,
+ DWC3_TRBCTL_CONTROL_DATA);
+ } else {
+ dwc3_map_buffer_to_dma(req);
+
+ ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
+ req->request.dma, req->request.length,
+ DWC3_TRBCTL_CONTROL_DATA);
}
+
+ WARN_ON(ret < 0);
+}
+
+static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
+ const struct dwc3_event_depevt *event)
+{
+ u32 type;
+ int ret;
+
+ dwc->ep0state = EP0_STATUS_PHASE;
+
+ type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
+ : DWC3_TRBCTL_CONTROL_STATUS2;
+
+ ret = dwc3_ep0_start_trans(dwc, event->endpoint_number,
+ dwc->ctrl_req_addr, 0, type);
+
+ WARN_ON(ret < 0);
}
static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
const struct dwc3_event_depevt *event)
{
- switch (dwc->ep0state) {
- case EP0_IN_WAIT_GADGET:
- dwc->ep0state = EP0_IN_WAIT_NRDY;
- break;
- case EP0_OUT_WAIT_GADGET:
- dwc->ep0state = EP0_OUT_WAIT_NRDY;
+ switch (event->status) {
+ case DEPEVT_STATUS_CONTROL_SETUP:
+ dev_vdbg(dwc->dev, "Control Setup\n");
+ dwc3_ep0_do_control_setup(dwc, event);
break;
- case EP0_IN_WAIT_NRDY:
- case EP0_OUT_WAIT_NRDY:
- dwc3_ep0_do_setup_status(dwc, event);
- break;
+ case DEPEVT_STATUS_CONTROL_DATA:
+ dev_vdbg(dwc->dev, "Control Data\n");
- case EP0_IDLE:
- case EP0_IN_STATUS_PHASE:
- case EP0_OUT_STATUS_PHASE:
- case EP0_IN_DATA_PHASE:
- case EP0_OUT_DATA_PHASE:
- case EP0_UNCONNECTED:
- case EP0_STALL:
+ if (dwc->ep0_next_event != DWC3_EP0_NRDY_DATA) {
+ dev_vdbg(dwc->dev, "Expected %d got %d\n",
+ DEPEVT_STATUS_CONTROL_DATA,
+ event->status);
+
+ dwc3_ep0_stall_and_restart(dwc);
+ return;
+ }
+
+ /*
+ * One of the possible error cases is when Host _does_
+ * request for Data Phase, but it does so on the wrong
+ * direction.
+ *
+ * Here, we already know ep0_next_event is DATA (see above),
+ * so we only need to check for direction.
+ */
+ if (dwc->ep0_expect_in != event->endpoint_number) {
+ dev_vdbg(dwc->dev, "Wrong direction for Data phase\n");
+ dwc3_ep0_stall_and_restart(dwc);
+ return;
+ }
+
+ dwc3_ep0_do_control_data(dwc, event);
break;
+
+ case DEPEVT_STATUS_CONTROL_STATUS:
+ dev_vdbg(dwc->dev, "Control Status\n");
+
+ if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS) {
+ dev_vdbg(dwc->dev, "Expected %d got %d\n",
+ DEPEVT_STATUS_CONTROL_STATUS,
+ event->status);
+
+ dwc3_ep0_stall_and_restart(dwc);
+ return;
+ }
+ dwc3_ep0_do_control_status(dwc, event);
}
}
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index cebaef720cd..859257a3d63 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -61,16 +61,16 @@ void dwc3_map_buffer_to_dma(struct dwc3_request *req)
{
struct dwc3 *dwc = req->dep->dwc;
+ if (req->request.length == 0) {
+ /* req->request.dma = dwc->setup_buf_addr; */
+ return;
+ }
+
if (req->request.dma == DMA_ADDR_INVALID) {
req->request.dma = dma_map_single(dwc->dev, req->request.buf,
req->request.length, req->direction
? DMA_TO_DEVICE : DMA_FROM_DEVICE);
req->mapped = true;
- } else {
- dma_sync_single_for_device(dwc->dev, req->request.dma,
- req->request.length, req->direction
- ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
- req->mapped = false;
}
}
@@ -78,15 +78,17 @@ void dwc3_unmap_buffer_from_dma(struct dwc3_request *req)
{
struct dwc3 *dwc = req->dep->dwc;
+ if (req->request.length == 0) {
+ req->request.dma = DMA_ADDR_INVALID;
+ return;
+ }
+
if (req->mapped) {
dma_unmap_single(dwc->dev, req->request.dma,
req->request.length, req->direction
? DMA_TO_DEVICE : DMA_FROM_DEVICE);
req->mapped = 0;
- } else {
- dma_sync_single_for_cpu(dwc->dev, req->request.dma,
- req->request.length, req->direction
- ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ req->request.dma = DMA_ADDR_INVALID;
}
}
@@ -152,7 +154,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
{
struct dwc3_ep *dep = dwc->eps[ep];
- unsigned long timeout = 500;
+ u32 timeout = 500;
u32 reg;
dev_vdbg(dwc->dev, "%s: cmd '%s' params %08x %08x %08x\n",
@@ -168,13 +170,12 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
do {
reg = dwc3_readl(dwc->regs, DWC3_DEPCMD(ep));
if (!(reg & DWC3_DEPCMD_CMDACT)) {
- dev_vdbg(dwc->dev, "CMD Compl Status %d DEPCMD %04x\n",
- ((reg & 0xf000) >> 12), reg);
+ dev_vdbg(dwc->dev, "Command Complete --> %d\n",
+ DWC3_DEPCMD_STATUS(reg));
return 0;
}
/*
- * XXX Figure out a sane timeout here. 500ms is way too much.
* We can't sleep here, because it is also called from
* interrupt context.
*/
@@ -182,7 +183,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
if (!timeout)
return -ETIMEDOUT;
- mdelay(1);
+ udelay(1);
} while (1);
}
@@ -358,34 +359,36 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
return 0;
}
-static void dwc3_gadget_nuke_reqs(struct dwc3_ep *dep, const int status)
+static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum);
+static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
{
struct dwc3_request *req;
+ if (!list_empty(&dep->req_queued))
+ dwc3_stop_active_transfer(dwc, dep->number);
+
while (!list_empty(&dep->request_list)) {
req = next_request(&dep->request_list);
- dwc3_gadget_giveback(dep, req, status);
+ dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
}
- /* nuke queued TRBs as well on command complete */
- dep->flags |= DWC3_EP_WILL_SHUTDOWN;
}
/**
* __dwc3_gadget_ep_disable - Disables a HW endpoint
* @dep: the endpoint to disable
*
- * Caller should take care of locking
+ * This function also removes requests which are currently processed ny the
+ * hardware and those which are not yet scheduled.
+ * Caller should take care of locking.
*/
-static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum);
static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
{
struct dwc3 *dwc = dep->dwc;
u32 reg;
dep->flags &= ~DWC3_EP_ENABLED;
- dwc3_stop_active_transfer(dwc, dep->number);
- dwc3_gadget_nuke_reqs(dep, -ESHUTDOWN);
+ dwc3_remove_requests(dwc, dep);
reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
reg &= ~DWC3_DALEPENA_EP(dep->number);
@@ -632,7 +635,7 @@ static struct dwc3_request *dwc3_prepare_trbs(struct dwc3_ep *dep,
break;
case USB_ENDPOINT_XFER_ISOC:
- trb.trbctl = DWC3_TRBCTL_ISOCHRONOUS;
+ trb.trbctl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
/* IOC every DWC3_TRB_NUM / 4 so we can refill */
if (!(cur_slot % (DWC3_TRB_NUM / 4)))
@@ -870,8 +873,14 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
memset(&params, 0x00, sizeof(params));
if (value) {
- if (dep->number == 0 || dep->number == 1)
- dwc->ep0state = EP0_STALL;
+ if (dep->number == 0 || dep->number == 1) {
+ /*
+ * Whenever EP0 is stalled, we will restart
+ * the state machine, thus moving back to
+ * Setup Phase
+ */
+ dwc->ep0state = EP0_SETUP_PHASE;
+ }
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
DWC3_DEPCMD_SETSTALL, &params);
@@ -1063,7 +1072,7 @@ static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
static void dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
{
u32 reg;
- unsigned long timeout = 500;
+ u32 timeout = 500;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
if (is_on)
@@ -1082,13 +1091,10 @@ static void dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on)
if (reg & DWC3_DSTS_DEVCTRLHLT)
break;
}
- /*
- * XXX reduce the 500ms delay
- */
timeout--;
if (!timeout)
break;
- mdelay(1);
+ udelay(1);
} while (1);
dev_vdbg(dwc->dev, "gadget %s data soft-%s\n",
@@ -1135,13 +1141,10 @@ static int dwc3_gadget_start(struct usb_gadget *g,
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
- /*
- * REVISIT: power down scale might be different
- * depending on PHY used, need to pass that via platform_data
- */
- reg |= DWC3_GCTL_PWRDNSCALE(0x61a)
- | DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_DEVICE);
+ reg &= ~DWC3_GCTL_SCALEDOWN(3);
+ reg &= ~DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG);
reg &= ~DWC3_GCTL_DISSCRAMBLE;
+ reg |= DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_DEVICE);
/*
* WORKAROUND: DWC3 revisions <1.90a have a bug
@@ -1177,7 +1180,7 @@ static int dwc3_gadget_start(struct usb_gadget *g,
}
/* begin to receive SETUP packets */
- dwc->ep0state = EP0_IDLE;
+ dwc->ep0state = EP0_SETUP_PHASE;
dwc3_ep0_out_start(dwc);
spin_unlock_irqrestore(&dwc->lock, flags);
@@ -1309,11 +1312,17 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
dwc3_trb_to_nat(req->trb, &trb);
- if (trb.hwo) {
+ if (trb.hwo && status != -ESHUTDOWN)
+ /*
+ * We continue despite the error. There is not much we
+ * can do. If we don't clean in up we loop for ever. If
+ * we skip the TRB than it gets overwritten reused after
+ * a while since we use them in a ring buffer. a BUG()
+ * would help. Lets hope that if this occures, someone
+ * fixes the root cause instead of looking away :)
+ */
dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n",
dep->name, req->trb);
- continue;
- }
count = trb.length;
if (dep->direction) {
@@ -1360,8 +1369,10 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
status = -ECONNRESET;
clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
- if (clean_busy)
+ if (clean_busy) {
dep->flags &= ~DWC3_EP_BUSY;
+ dep->res_trans_idx = 0;
+ }
}
static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
@@ -1407,16 +1418,6 @@ static void dwc3_process_ep_cmd_complete(struct dwc3_ep *dep,
dwc3_cleanup_done_reqs(dwc, dep, &mod_ev, -ESHUTDOWN);
dep->flags &= ~DWC3_EP_BUSY;
/* pending requets are ignored and are queued on XferNotReady */
-
- if (dep->flags & DWC3_EP_WILL_SHUTDOWN) {
- while (!list_empty(&dep->req_queued)) {
- struct dwc3_request *req;
-
- req = next_request(&dep->req_queued);
- dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
- }
- dep->flags &= DWC3_EP_WILL_SHUTDOWN;
- }
}
static void dwc3_ep_cmd_compl(struct dwc3_ep *dep,
@@ -1524,6 +1525,7 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum)
dep = dwc->eps[epnum];
+ WARN_ON(!dep->res_trans_idx);
if (dep->res_trans_idx) {
cmd = DWC3_DEPCMD_ENDTRANSFER;
cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC;
@@ -1531,6 +1533,7 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum)
memset(&params, 0, sizeof(params));
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
WARN_ON_ONCE(ret);
+ dep->res_trans_idx = 0;
}
}
@@ -1545,7 +1548,7 @@ static void dwc3_stop_active_transfers(struct dwc3 *dwc)
if (!(dep->flags & DWC3_EP_ENABLED))
continue;
- __dwc3_gadget_ep_disable(dep);
+ dwc3_remove_requests(dwc, dep);
}
}
@@ -1718,7 +1721,6 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
memset(&params, 0x00, sizeof(params));
- dwc->ep0state = EP0_IDLE;
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
speed = reg & DWC3_DSTS_CONNECTSPD;
dwc->speed = speed;
@@ -1790,10 +1792,10 @@ static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
unsigned int evtinfo)
{
- dev_vdbg(dwc->dev, "%s\n", __func__);
-
/* The fith bit says SuperSpeed yes or no. */
dwc->link_state = evtinfo & DWC3_LINK_STATE_MASK;
+
+ dev_vdbg(dwc->dev, "%s link %d\n", __func__, dwc->link_state);
}
static void dwc3_gadget_interrupt(struct dwc3 *dwc,
@@ -1947,6 +1949,14 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
goto err2;
}
+ dwc->ep0_bounce = dma_alloc_coherent(dwc->dev,
+ 512, &dwc->ep0_bounce_addr, GFP_KERNEL);
+ if (!dwc->ep0_bounce) {
+ dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n");
+ ret = -ENOMEM;
+ goto err3;
+ }
+
dev_set_name(&dwc->gadget.dev, "gadget");
dwc->gadget.ops = &dwc3_gadget_ops;
@@ -1968,7 +1978,7 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
ret = dwc3_gadget_init_endpoints(dwc);
if (ret)
- goto err3;
+ goto err4;
irq = platform_get_irq(to_platform_device(dwc->dev), 0);
@@ -1977,7 +1987,7 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
if (ret) {
dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
irq, ret);
- goto err4;
+ goto err5;
}
/* Enable all but Start and End of Frame IRQs */
@@ -1996,27 +2006,31 @@ int __devinit dwc3_gadget_init(struct dwc3 *dwc)
if (ret) {
dev_err(dwc->dev, "failed to register gadget device\n");
put_device(&dwc->gadget.dev);
- goto err5;
+ goto err6;
}
ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
if (ret) {
dev_err(dwc->dev, "failed to register udc\n");
- goto err6;
+ goto err7;
}
return 0;
-err6:
+err7:
device_unregister(&dwc->gadget.dev);
-err5:
+err6:
dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
free_irq(irq, dwc);
-err4:
+err5:
dwc3_gadget_free_endpoints(dwc);
+err4:
+ dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce,
+ dwc->ep0_bounce_addr);
+
err3:
dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2,
dwc->setup_buf, dwc->setup_buf_addr);
@@ -2049,6 +2063,9 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
dwc3_gadget_free_endpoints(dwc);
+ dma_free_coherent(dwc->dev, 512, dwc->ep0_bounce,
+ dwc->ep0_bounce_addr);
+
dma_free_coherent(dwc->dev, sizeof(*dwc->setup_buf) * 2,
dwc->setup_buf, dwc->setup_buf_addr);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index fe563798389..a60b472a0b3 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -96,6 +96,22 @@ config USB_GADGET_VBUS_DRAW
This value will be used except for system-specific gadget
drivers that have more specific information.
+config USB_GADGET_STORAGE_NUM_BUFFERS
+ int "Number of storage pipeline buffers"
+ range 2 4
+ default 2
+ help
+ Usually 2 buffers are enough to establish a good buffering
+ pipeline. The number may be increased in order to compensate
+ for a bursty VFS behaviour. For instance there may be CPU wake up
+ latencies that makes the VFS to appear bursty in a system with
+ an CPU on-demand governor. Especially if DMA is doing IO to
+ offload the CPU. In this case the CPU will go into power
+ save often and spin up occasionally to move data within VFS.
+ If selecting USB_GADGET_DEBUG_FILES this value may be set by
+ a module parameter as well.
+ If unsure, say 2.
+
#
# USB Peripheral Controller Support
#
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index a9a4eade7e8..ec7ffcd0d0c 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -460,7 +460,7 @@ static int audio_set_endpoint_req(struct usb_function *f,
switch (ctrl->bRequest) {
case UAC_SET_CUR:
- value = 0;
+ value = len;
break;
case UAC_SET_MIN:
@@ -499,7 +499,7 @@ static int audio_get_endpoint_req(struct usb_function *f,
case UAC_GET_MIN:
case UAC_GET_MAX:
case UAC_GET_RES:
- value = 3;
+ value = len;
break;
case UAC_GET_MEM:
break;
@@ -681,17 +681,18 @@ f_audio_bind(struct usb_configuration *c, struct usb_function *f)
status = -ENOMEM;
- /* supcard all relevant hardware speeds... we expect that when
+ /* copy descriptors, and track endpoint copies */
+ f->descriptors = usb_copy_descriptors(f_audio_desc);
+
+ /*
+ * support all relevant hardware speeds... we expect that when
* hardware is dual speed, all bulk-capable endpoints work at
* both speeds
*/
-
- /* copy descriptors, and track endpoint copies */
if (gadget_is_dualspeed(c->cdev->gadget)) {
c->highspeed = true;
f->hs_descriptors = usb_copy_descriptors(f_audio_desc);
- } else
- f->descriptors = usb_copy_descriptors(f_audio_desc);
+ }
return 0;
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 4ce3decda1d..75694147314 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -112,8 +112,7 @@
* is not loaded (an empty string as "filename" in the fsg_config
* structure causes error). The CD-ROM emulation includes a single
* data track and no audio tracks; hence there need be only one
- * backing file per LUN. Note also that the CD-ROM block length is
- * set to 512 rather than the more common value 2048.
+ * backing file per LUN.
*
*
* MSF includes support for module parameters. If gadget using it
@@ -363,7 +362,7 @@ struct fsg_common {
struct fsg_buffhd *next_buffhd_to_fill;
struct fsg_buffhd *next_buffhd_to_drain;
- struct fsg_buffhd buffhds[FSG_NUM_BUFFERS];
+ struct fsg_buffhd *buffhds;
int cmnd_size;
u8 cmnd[MAX_COMMAND_SIZE];
@@ -745,7 +744,6 @@ static int do_read(struct fsg_common *common)
u32 amount_left;
loff_t file_offset, file_offset_tmp;
unsigned int amount;
- unsigned int partial_page;
ssize_t nread;
/*
@@ -771,7 +769,7 @@ static int do_read(struct fsg_common *common)
curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
return -EINVAL;
}
- file_offset = ((loff_t) lba) << 9;
+ file_offset = ((loff_t) lba) << curlun->blkbits;
/* Carry out the file reads */
amount_left = common->data_size_from_cmnd;
@@ -784,18 +782,10 @@ static int do_read(struct fsg_common *common)
* Try to read the remaining amount.
* But don't read more than the buffer size.
* And don't try to read past the end of the file.
- * Finally, if we're not at a page boundary, don't read past
- * the next page.
- * If this means reading 0 then we were asked to read past
- * the end of file.
*/
amount = min(amount_left, FSG_BUFLEN);
amount = min((loff_t)amount,
curlun->file_length - file_offset);
- partial_page = file_offset & (PAGE_CACHE_SIZE - 1);
- if (partial_page > 0)
- amount = min(amount, (unsigned int)PAGE_CACHE_SIZE -
- partial_page);
/* Wait for the next buffer to become available */
bh = common->next_buffhd_to_fill;
@@ -812,7 +802,8 @@ static int do_read(struct fsg_common *common)
if (amount == 0) {
curlun->sense_data =
SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
- curlun->sense_data_info = file_offset >> 9;
+ curlun->sense_data_info =
+ file_offset >> curlun->blkbits;
curlun->info_valid = 1;
bh->inreq->length = 0;
bh->state = BUF_STATE_FULL;
@@ -835,18 +826,25 @@ static int do_read(struct fsg_common *common)
} else if (nread < amount) {
LDBG(curlun, "partial file read: %d/%u\n",
(int)nread, amount);
- nread -= (nread & 511); /* Round down to a block */
+ nread = round_down(nread, curlun->blksize);
}
file_offset += nread;
amount_left -= nread;
common->residue -= nread;
+
+ /*
+ * Except at the end of the transfer, nread will be
+ * equal to the buffer size, which is divisible by the
+ * bulk-in maxpacket size.
+ */
bh->inreq->length = nread;
bh->state = BUF_STATE_FULL;
/* If an error occurred, report it and its position */
if (nread < amount) {
curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
- curlun->sense_data_info = file_offset >> 9;
+ curlun->sense_data_info =
+ file_offset >> curlun->blkbits;
curlun->info_valid = 1;
break;
}
@@ -877,7 +875,6 @@ static int do_write(struct fsg_common *common)
u32 amount_left_to_req, amount_left_to_write;
loff_t usb_offset, file_offset, file_offset_tmp;
unsigned int amount;
- unsigned int partial_page;
ssize_t nwritten;
int rc;
@@ -921,7 +918,7 @@ static int do_write(struct fsg_common *common)
/* Carry out the file writes */
get_some_more = 1;
- file_offset = usb_offset = ((loff_t) lba) << 9;
+ file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
amount_left_to_req = common->data_size_from_cmnd;
amount_left_to_write = common->data_size_from_cmnd;
@@ -933,41 +930,21 @@ static int do_write(struct fsg_common *common)
/*
* Figure out how much we want to get:
- * Try to get the remaining amount.
- * But don't get more than the buffer size.
- * And don't try to go past the end of the file.
- * If we're not at a page boundary,
- * don't go past the next page.
- * If this means getting 0, then we were asked
- * to write past the end of file.
- * Finally, round down to a block boundary.
+ * Try to get the remaining amount,
+ * but not more than the buffer size.
*/
amount = min(amount_left_to_req, FSG_BUFLEN);
- amount = min((loff_t)amount,
- curlun->file_length - usb_offset);
- partial_page = usb_offset & (PAGE_CACHE_SIZE - 1);
- if (partial_page > 0)
- amount = min(amount,
- (unsigned int)PAGE_CACHE_SIZE - partial_page);
-
- if (amount == 0) {
+
+ /* Beyond the end of the backing file? */
+ if (usb_offset >= curlun->file_length) {
get_some_more = 0;
curlun->sense_data =
SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
- curlun->sense_data_info = usb_offset >> 9;
+ curlun->sense_data_info =
+ usb_offset >> curlun->blkbits;
curlun->info_valid = 1;
continue;
}
- amount -= amount & 511;
- if (amount == 0) {
-
- /*
- * Why were we were asked to transfer a
- * partial block?
- */
- get_some_more = 0;
- continue;
- }
/* Get the next buffer */
usb_offset += amount;
@@ -977,8 +954,9 @@ static int do_write(struct fsg_common *common)
get_some_more = 0;
/*
- * amount is always divisible by 512, hence by
- * the bulk-out maxpacket size
+ * Except at the end of the transfer, amount will be
+ * equal to the buffer size, which is divisible by
+ * the bulk-out maxpacket size.
*/
bh->outreq->length = amount;
bh->bulk_out_intended_length = amount;
@@ -1002,7 +980,8 @@ static int do_write(struct fsg_common *common)
/* Did something go wrong with the transfer? */
if (bh->outreq->status != 0) {
curlun->sense_data = SS_COMMUNICATION_FAILURE;
- curlun->sense_data_info = file_offset >> 9;
+ curlun->sense_data_info =
+ file_offset >> curlun->blkbits;
curlun->info_valid = 1;
break;
}
@@ -1016,6 +995,11 @@ static int do_write(struct fsg_common *common)
amount = curlun->file_length - file_offset;
}
+ /* Don't write a partial block */
+ amount = round_down(amount, curlun->blksize);
+ if (amount == 0)
+ goto empty_write;
+
/* Perform the write */
file_offset_tmp = file_offset;
nwritten = vfs_write(curlun->filp,
@@ -1033,8 +1017,7 @@ static int do_write(struct fsg_common *common)
} else if (nwritten < amount) {
LDBG(curlun, "partial file write: %d/%u\n",
(int)nwritten, amount);
- nwritten -= (nwritten & 511);
- /* Round down to a block */
+ nwritten = round_down(nwritten, curlun->blksize);
}
file_offset += nwritten;
amount_left_to_write -= nwritten;
@@ -1043,11 +1026,13 @@ static int do_write(struct fsg_common *common)
/* If an error occurred, report it and its position */
if (nwritten < amount) {
curlun->sense_data = SS_WRITE_ERROR;
- curlun->sense_data_info = file_offset >> 9;
+ curlun->sense_data_info =
+ file_offset >> curlun->blkbits;
curlun->info_valid = 1;
break;
}
+ empty_write:
/* Did the host decide to stop early? */
if (bh->outreq->actual != bh->outreq->length) {
common->short_packet_received = 1;
@@ -1129,8 +1114,8 @@ static int do_verify(struct fsg_common *common)
return -EIO; /* No default reply */
/* Prepare to carry out the file verify */
- amount_left = verification_length << 9;
- file_offset = ((loff_t) lba) << 9;
+ amount_left = verification_length << curlun->blkbits;
+ file_offset = ((loff_t) lba) << curlun->blkbits;
/* Write out all the dirty buffers before invalidating them */
fsg_lun_fsync_sub(curlun);
@@ -1148,8 +1133,6 @@ static int do_verify(struct fsg_common *common)
* Try to read the remaining amount, but not more than
* the buffer size.
* And don't try to read past the end of the file.
- * If this means reading 0 then we were asked to read
- * past the end of file.
*/
amount = min(amount_left, FSG_BUFLEN);
amount = min((loff_t)amount,
@@ -1157,7 +1140,8 @@ static int do_verify(struct fsg_common *common)
if (amount == 0) {
curlun->sense_data =
SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
- curlun->sense_data_info = file_offset >> 9;
+ curlun->sense_data_info =
+ file_offset >> curlun->blkbits;
curlun->info_valid = 1;
break;
}
@@ -1179,11 +1163,12 @@ static int do_verify(struct fsg_common *common)
} else if (nread < amount) {
LDBG(curlun, "partial file verify: %d/%u\n",
(int)nread, amount);
- nread -= nread & 511; /* Round down to a sector */
+ nread = round_down(nread, curlun->blksize);
}
if (nread == 0) {
curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
- curlun->sense_data_info = file_offset >> 9;
+ curlun->sense_data_info =
+ file_offset >> curlun->blkbits;
curlun->info_valid = 1;
break;
}
@@ -1289,7 +1274,7 @@ static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
/* Max logical block */
- put_unaligned_be32(512, &buf[4]); /* Block length */
+ put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
return 8;
}
@@ -1527,7 +1512,7 @@ static int do_read_format_capacities(struct fsg_common *common,
put_unaligned_be32(curlun->num_sectors, &buf[0]);
/* Number of blocks */
- put_unaligned_be32(512, &buf[4]); /* Block length */
+ put_unaligned_be32(curlun->blksize, &buf[4]);/* Block length */
buf[4] = 0x02; /* Current capacity */
return 12;
}
@@ -1623,7 +1608,8 @@ static int throw_away_data(struct fsg_common *common)
amount = min(common->usb_amount_left, FSG_BUFLEN);
/*
- * amount is always divisible by 512, hence by
+ * Except at the end of the transfer, amount will be
+ * equal to the buffer size, which is divisible by
* the bulk-out maxpacket size.
*/
bh->outreq->length = amount;
@@ -2022,7 +2008,8 @@ static int do_scsi_command(struct fsg_common *common)
case READ_6:
i = common->cmnd[4];
- common->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+ common->data_size_from_cmnd = (i == 0 ? 256 : i) <<
+ common->curlun->blkbits;
reply = check_command(common, 6, DATA_DIR_TO_HOST,
(7<<1) | (1<<4), 1,
"READ(6)");
@@ -2032,7 +2019,8 @@ static int do_scsi_command(struct fsg_common *common)
case READ_10:
common->data_size_from_cmnd =
- get_unaligned_be16(&common->cmnd[7]) << 9;
+ get_unaligned_be16(&common->cmnd[7]) <<
+ common->curlun->blkbits;
reply = check_command(common, 10, DATA_DIR_TO_HOST,
(1<<1) | (0xf<<2) | (3<<7), 1,
"READ(10)");
@@ -2042,7 +2030,8 @@ static int do_scsi_command(struct fsg_common *common)
case READ_12:
common->data_size_from_cmnd =
- get_unaligned_be32(&common->cmnd[6]) << 9;
+ get_unaligned_be32(&common->cmnd[6]) <<
+ common->curlun->blkbits;
reply = check_command(common, 12, DATA_DIR_TO_HOST,
(1<<1) | (0xf<<2) | (0xf<<6), 1,
"READ(12)");
@@ -2142,7 +2131,8 @@ static int do_scsi_command(struct fsg_common *common)
case WRITE_6:
i = common->cmnd[4];
- common->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+ common->data_size_from_cmnd = (i == 0 ? 256 : i) <<
+ common->curlun->blkbits;
reply = check_command(common, 6, DATA_DIR_FROM_HOST,
(7<<1) | (1<<4), 1,
"WRITE(6)");
@@ -2152,7 +2142,8 @@ static int do_scsi_command(struct fsg_common *common)
case WRITE_10:
common->data_size_from_cmnd =
- get_unaligned_be16(&common->cmnd[7]) << 9;
+ get_unaligned_be16(&common->cmnd[7]) <<
+ common->curlun->blkbits;
reply = check_command(common, 10, DATA_DIR_FROM_HOST,
(1<<1) | (0xf<<2) | (3<<7), 1,
"WRITE(10)");
@@ -2162,7 +2153,8 @@ static int do_scsi_command(struct fsg_common *common)
case WRITE_12:
common->data_size_from_cmnd =
- get_unaligned_be32(&common->cmnd[6]) << 9;
+ get_unaligned_be32(&common->cmnd[6]) <<
+ common->curlun->blkbits;
reply = check_command(common, 12, DATA_DIR_FROM_HOST,
(1<<1) | (0xf<<2) | (0xf<<6), 1,
"WRITE(12)");
@@ -2348,7 +2340,7 @@ reset:
if (common->fsg) {
fsg = common->fsg;
- for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ for (i = 0; i < fsg_num_buffers; ++i) {
struct fsg_buffhd *bh = &common->buffhds[i];
if (bh->inreq) {
@@ -2405,7 +2397,7 @@ reset:
clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
/* Allocate the requests */
- for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ for (i = 0; i < fsg_num_buffers; ++i) {
struct fsg_buffhd *bh = &common->buffhds[i];
rc = alloc_request(common, fsg->bulk_in, &bh->inreq);
@@ -2474,7 +2466,7 @@ static void handle_exception(struct fsg_common *common)
/* Cancel all the pending transfers */
if (likely(common->fsg)) {
- for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ for (i = 0; i < fsg_num_buffers; ++i) {
bh = &common->buffhds[i];
if (bh->inreq_busy)
usb_ep_dequeue(common->fsg->bulk_in, bh->inreq);
@@ -2486,7 +2478,7 @@ static void handle_exception(struct fsg_common *common)
/* Wait until everything is idle */
for (;;) {
int num_active = 0;
- for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ for (i = 0; i < fsg_num_buffers; ++i) {
bh = &common->buffhds[i];
num_active += bh->inreq_busy + bh->outreq_busy;
}
@@ -2509,7 +2501,7 @@ static void handle_exception(struct fsg_common *common)
*/
spin_lock_irq(&common->lock);
- for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ for (i = 0; i < fsg_num_buffers; ++i) {
bh = &common->buffhds[i];
bh->state = BUF_STATE_EMPTY;
}
@@ -2718,6 +2710,10 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
int nluns, i, rc;
char *pathbuf;
+ rc = fsg_num_buffers_validate();
+ if (rc != 0)
+ return ERR_PTR(rc);
+
/* Find out how many LUNs there should be */
nluns = cfg->nluns;
if (nluns < 1 || nluns > FSG_MAX_LUNS) {
@@ -2736,6 +2732,14 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
common->free_storage_on_release = 0;
}
+ common->buffhds = kcalloc(fsg_num_buffers,
+ sizeof *(common->buffhds), GFP_KERNEL);
+ if (!common->buffhds) {
+ if (common->free_storage_on_release)
+ kfree(common);
+ return ERR_PTR(-ENOMEM);
+ }
+
common->ops = cfg->ops;
common->private_data = cfg->private_data;
@@ -2813,7 +2817,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
/* Data buffers cyclic list */
bh = common->buffhds;
- i = FSG_NUM_BUFFERS;
+ i = fsg_num_buffers;
goto buffhds_first_it;
do {
bh->next = bh + 1;
@@ -2939,12 +2943,13 @@ static void fsg_common_release(struct kref *ref)
{
struct fsg_buffhd *bh = common->buffhds;
- unsigned i = FSG_NUM_BUFFERS;
+ unsigned i = fsg_num_buffers;
do {
kfree(bh->buf);
} while (++bh, --i);
}
+ kfree(common->buffhds);
if (common->free_storage_on_release)
kfree(common);
}
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index 4ac8084b579..12ac30b21ba 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -69,8 +69,7 @@
* each LUN would be settable independently as a disk drive or a CD-ROM
* drive, but currently all LUNs have to be the same type. The CD-ROM
* emulation includes a single data track and no audio tracks; hence there
- * need be only one backing file per LUN. Note also that the CD-ROM block
- * length is set to 512 rather than the more common value 2048.
+ * need be only one backing file per LUN.
*
* Requirements are modest; only a bulk-in and a bulk-out endpoint are
* needed (an interrupt-out endpoint is also needed for CBI). The memory
@@ -461,7 +460,6 @@ struct fsg_dev {
struct fsg_buffhd *next_buffhd_to_fill;
struct fsg_buffhd *next_buffhd_to_drain;
- struct fsg_buffhd buffhds[FSG_NUM_BUFFERS];
int thread_wakeup_needed;
struct completion thread_notifier;
@@ -488,6 +486,8 @@ struct fsg_dev {
unsigned int nluns;
struct fsg_lun *luns;
struct fsg_lun *curlun;
+ /* Must be the last entry */
+ struct fsg_buffhd buffhds[];
};
typedef void (*fsg_routine_t)(struct fsg_dev *);
@@ -1136,7 +1136,6 @@ static int do_read(struct fsg_dev *fsg)
u32 amount_left;
loff_t file_offset, file_offset_tmp;
unsigned int amount;
- unsigned int partial_page;
ssize_t nread;
/* Get the starting Logical Block Address and check that it's
@@ -1158,7 +1157,7 @@ static int do_read(struct fsg_dev *fsg)
curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
return -EINVAL;
}
- file_offset = ((loff_t) lba) << 9;
+ file_offset = ((loff_t) lba) << curlun->blkbits;
/* Carry out the file reads */
amount_left = fsg->data_size_from_cmnd;
@@ -1171,17 +1170,10 @@ static int do_read(struct fsg_dev *fsg)
* Try to read the remaining amount.
* But don't read more than the buffer size.
* And don't try to read past the end of the file.
- * Finally, if we're not at a page boundary, don't read past
- * the next page.
- * If this means reading 0 then we were asked to read past
- * the end of file. */
+ */
amount = min((unsigned int) amount_left, mod_data.buflen);
amount = min((loff_t) amount,
curlun->file_length - file_offset);
- partial_page = file_offset & (PAGE_CACHE_SIZE - 1);
- if (partial_page > 0)
- amount = min(amount, (unsigned int) PAGE_CACHE_SIZE -
- partial_page);
/* Wait for the next buffer to become available */
bh = fsg->next_buffhd_to_fill;
@@ -1196,7 +1188,7 @@ static int do_read(struct fsg_dev *fsg)
if (amount == 0) {
curlun->sense_data =
SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
- curlun->sense_data_info = file_offset >> 9;
+ curlun->sense_data_info = file_offset >> curlun->blkbits;
curlun->info_valid = 1;
bh->inreq->length = 0;
bh->state = BUF_STATE_FULL;
@@ -1221,18 +1213,23 @@ static int do_read(struct fsg_dev *fsg)
} else if (nread < amount) {
LDBG(curlun, "partial file read: %d/%u\n",
(int) nread, amount);
- nread -= (nread & 511); // Round down to a block
+ nread = round_down(nread, curlun->blksize);
}
file_offset += nread;
amount_left -= nread;
fsg->residue -= nread;
+
+ /* Except at the end of the transfer, nread will be
+ * equal to the buffer size, which is divisible by the
+ * bulk-in maxpacket size.
+ */
bh->inreq->length = nread;
bh->state = BUF_STATE_FULL;
/* If an error occurred, report it and its position */
if (nread < amount) {
curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
- curlun->sense_data_info = file_offset >> 9;
+ curlun->sense_data_info = file_offset >> curlun->blkbits;
curlun->info_valid = 1;
break;
}
@@ -1262,7 +1259,6 @@ static int do_write(struct fsg_dev *fsg)
u32 amount_left_to_req, amount_left_to_write;
loff_t usb_offset, file_offset, file_offset_tmp;
unsigned int amount;
- unsigned int partial_page;
ssize_t nwritten;
int rc;
@@ -1303,7 +1299,7 @@ static int do_write(struct fsg_dev *fsg)
/* Carry out the file writes */
get_some_more = 1;
- file_offset = usb_offset = ((loff_t) lba) << 9;
+ file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd;
while (amount_left_to_write > 0) {
@@ -1313,38 +1309,20 @@ static int do_write(struct fsg_dev *fsg)
if (bh->state == BUF_STATE_EMPTY && get_some_more) {
/* Figure out how much we want to get:
- * Try to get the remaining amount.
- * But don't get more than the buffer size.
- * And don't try to go past the end of the file.
- * If we're not at a page boundary,
- * don't go past the next page.
- * If this means getting 0, then we were asked
- * to write past the end of file.
- * Finally, round down to a block boundary. */
+ * Try to get the remaining amount,
+ * but not more than the buffer size.
+ */
amount = min(amount_left_to_req, mod_data.buflen);
- amount = min((loff_t) amount, curlun->file_length -
- usb_offset);
- partial_page = usb_offset & (PAGE_CACHE_SIZE - 1);
- if (partial_page > 0)
- amount = min(amount,
- (unsigned int) PAGE_CACHE_SIZE - partial_page);
-
- if (amount == 0) {
+
+ /* Beyond the end of the backing file? */
+ if (usb_offset >= curlun->file_length) {
get_some_more = 0;
curlun->sense_data =
SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
- curlun->sense_data_info = usb_offset >> 9;
+ curlun->sense_data_info = usb_offset >> curlun->blkbits;
curlun->info_valid = 1;
continue;
}
- amount -= (amount & 511);
- if (amount == 0) {
-
- /* Why were we were asked to transfer a
- * partial block? */
- get_some_more = 0;
- continue;
- }
/* Get the next buffer */
usb_offset += amount;
@@ -1353,8 +1331,10 @@ static int do_write(struct fsg_dev *fsg)
if (amount_left_to_req == 0)
get_some_more = 0;
- /* amount is always divisible by 512, hence by
- * the bulk-out maxpacket size */
+ /* Except at the end of the transfer, amount will be
+ * equal to the buffer size, which is divisible by
+ * the bulk-out maxpacket size.
+ */
bh->outreq->length = bh->bulk_out_intended_length =
amount;
bh->outreq->short_not_ok = 1;
@@ -1376,7 +1356,7 @@ static int do_write(struct fsg_dev *fsg)
/* Did something go wrong with the transfer? */
if (bh->outreq->status != 0) {
curlun->sense_data = SS_COMMUNICATION_FAILURE;
- curlun->sense_data_info = file_offset >> 9;
+ curlun->sense_data_info = file_offset >> curlun->blkbits;
curlun->info_valid = 1;
break;
}
@@ -1390,6 +1370,11 @@ static int do_write(struct fsg_dev *fsg)
amount = curlun->file_length - file_offset;
}
+ /* Don't write a partial block */
+ amount = round_down(amount, curlun->blksize);
+ if (amount == 0)
+ goto empty_write;
+
/* Perform the write */
file_offset_tmp = file_offset;
nwritten = vfs_write(curlun->filp,
@@ -1408,8 +1393,7 @@ static int do_write(struct fsg_dev *fsg)
} else if (nwritten < amount) {
LDBG(curlun, "partial file write: %d/%u\n",
(int) nwritten, amount);
- nwritten -= (nwritten & 511);
- // Round down to a block
+ nwritten = round_down(nwritten, curlun->blksize);
}
file_offset += nwritten;
amount_left_to_write -= nwritten;
@@ -1418,11 +1402,12 @@ static int do_write(struct fsg_dev *fsg)
/* If an error occurred, report it and its position */
if (nwritten < amount) {
curlun->sense_data = SS_WRITE_ERROR;
- curlun->sense_data_info = file_offset >> 9;
+ curlun->sense_data_info = file_offset >> curlun->blkbits;
curlun->info_valid = 1;
break;
}
+ empty_write:
/* Did the host decide to stop early? */
if (bh->outreq->actual != bh->outreq->length) {
fsg->short_packet_received = 1;
@@ -1500,8 +1485,8 @@ static int do_verify(struct fsg_dev *fsg)
return -EIO; // No default reply
/* Prepare to carry out the file verify */
- amount_left = verification_length << 9;
- file_offset = ((loff_t) lba) << 9;
+ amount_left = verification_length << curlun->blkbits;
+ file_offset = ((loff_t) lba) << curlun->blkbits;
/* Write out all the dirty buffers before invalidating them */
fsg_lun_fsync_sub(curlun);
@@ -1519,15 +1504,14 @@ static int do_verify(struct fsg_dev *fsg)
* Try to read the remaining amount, but not more than
* the buffer size.
* And don't try to read past the end of the file.
- * If this means reading 0 then we were asked to read
- * past the end of file. */
+ */
amount = min((unsigned int) amount_left, mod_data.buflen);
amount = min((loff_t) amount,
curlun->file_length - file_offset);
if (amount == 0) {
curlun->sense_data =
SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
- curlun->sense_data_info = file_offset >> 9;
+ curlun->sense_data_info = file_offset >> curlun->blkbits;
curlun->info_valid = 1;
break;
}
@@ -1550,11 +1534,11 @@ static int do_verify(struct fsg_dev *fsg)
} else if (nread < amount) {
LDBG(curlun, "partial file verify: %d/%u\n",
(int) nread, amount);
- nread -= (nread & 511); // Round down to a sector
+ nread = round_down(nread, curlun->blksize);
}
if (nread == 0) {
curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
- curlun->sense_data_info = file_offset >> 9;
+ curlun->sense_data_info = file_offset >> curlun->blkbits;
curlun->info_valid = 1;
break;
}
@@ -1668,7 +1652,7 @@ static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
/* Max logical block */
- put_unaligned_be32(512, &buf[4]); /* Block length */
+ put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */
return 8;
}
@@ -1890,7 +1874,7 @@ static int do_read_format_capacities(struct fsg_dev *fsg,
put_unaligned_be32(curlun->num_sectors, &buf[0]);
/* Number of blocks */
- put_unaligned_be32(512, &buf[4]); /* Block length */
+ put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */
buf[4] = 0x02; /* Current capacity */
return 12;
}
@@ -1983,8 +1967,10 @@ static int throw_away_data(struct fsg_dev *fsg)
amount = min(fsg->usb_amount_left,
(u32) mod_data.buflen);
- /* amount is always divisible by 512, hence by
- * the bulk-out maxpacket size */
+ /* Except at the end of the transfer, amount will be
+ * equal to the buffer size, which is divisible by
+ * the bulk-out maxpacket size.
+ */
bh->outreq->length = bh->bulk_out_intended_length =
amount;
bh->outreq->short_not_ok = 1;
@@ -2415,7 +2401,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
case READ_6:
i = fsg->cmnd[4];
- fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+ fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << fsg->curlun->blkbits;
if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
(7<<1) | (1<<4), 1,
"READ(6)")) == 0)
@@ -2424,7 +2410,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
case READ_10:
fsg->data_size_from_cmnd =
- get_unaligned_be16(&fsg->cmnd[7]) << 9;
+ get_unaligned_be16(&fsg->cmnd[7]) << fsg->curlun->blkbits;
if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
(1<<1) | (0xf<<2) | (3<<7), 1,
"READ(10)")) == 0)
@@ -2433,7 +2419,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
case READ_12:
fsg->data_size_from_cmnd =
- get_unaligned_be32(&fsg->cmnd[6]) << 9;
+ get_unaligned_be32(&fsg->cmnd[6]) << fsg->curlun->blkbits;
if ((reply = check_command(fsg, 12, DATA_DIR_TO_HOST,
(1<<1) | (0xf<<2) | (0xf<<6), 1,
"READ(12)")) == 0)
@@ -2519,7 +2505,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
case WRITE_6:
i = fsg->cmnd[4];
- fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+ fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << fsg->curlun->blkbits;
if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
(7<<1) | (1<<4), 1,
"WRITE(6)")) == 0)
@@ -2528,7 +2514,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
case WRITE_10:
fsg->data_size_from_cmnd =
- get_unaligned_be16(&fsg->cmnd[7]) << 9;
+ get_unaligned_be16(&fsg->cmnd[7]) << fsg->curlun->blkbits;
if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
(1<<1) | (0xf<<2) | (3<<7), 1,
"WRITE(10)")) == 0)
@@ -2537,7 +2523,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
case WRITE_12:
fsg->data_size_from_cmnd =
- get_unaligned_be32(&fsg->cmnd[6]) << 9;
+ get_unaligned_be32(&fsg->cmnd[6]) << fsg->curlun->blkbits;
if ((reply = check_command(fsg, 12, DATA_DIR_FROM_HOST,
(1<<1) | (0xf<<2) | (0xf<<6), 1,
"WRITE(12)")) == 0)
@@ -2752,7 +2738,7 @@ static int do_set_interface(struct fsg_dev *fsg, int altsetting)
reset:
/* Deallocate the requests */
- for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ for (i = 0; i < fsg_num_buffers; ++i) {
struct fsg_buffhd *bh = &fsg->buffhds[i];
if (bh->inreq) {
@@ -2813,7 +2799,7 @@ reset:
}
/* Allocate the requests */
- for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ for (i = 0; i < fsg_num_buffers; ++i) {
struct fsg_buffhd *bh = &fsg->buffhds[i];
if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0)
@@ -2902,7 +2888,7 @@ static void handle_exception(struct fsg_dev *fsg)
/* Cancel all the pending transfers */
if (fsg->intreq_busy)
usb_ep_dequeue(fsg->intr_in, fsg->intreq);
- for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ for (i = 0; i < fsg_num_buffers; ++i) {
bh = &fsg->buffhds[i];
if (bh->inreq_busy)
usb_ep_dequeue(fsg->bulk_in, bh->inreq);
@@ -2913,7 +2899,7 @@ static void handle_exception(struct fsg_dev *fsg)
/* Wait until everything is idle */
for (;;) {
num_active = fsg->intreq_busy;
- for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ for (i = 0; i < fsg_num_buffers; ++i) {
bh = &fsg->buffhds[i];
num_active += bh->inreq_busy + bh->outreq_busy;
}
@@ -2935,7 +2921,7 @@ static void handle_exception(struct fsg_dev *fsg)
* state, and the exception. Then invoke the handler. */
spin_lock_irq(&fsg->lock);
- for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ for (i = 0; i < fsg_num_buffers; ++i) {
bh = &fsg->buffhds[i];
bh->state = BUF_STATE_EMPTY;
}
@@ -3165,7 +3151,7 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
}
/* Free the data buffers */
- for (i = 0; i < FSG_NUM_BUFFERS; ++i)
+ for (i = 0; i < fsg_num_buffers; ++i)
kfree(fsg->buffhds[i].buf);
/* Free the request and buffer for endpoint 0 */
@@ -3453,7 +3439,7 @@ static int __init fsg_bind(struct usb_gadget *gadget)
req->complete = ep0_complete;
/* Allocate the data buffers */
- for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
+ for (i = 0; i < fsg_num_buffers; ++i) {
struct fsg_buffhd *bh = &fsg->buffhds[i];
/* Allocate for the bulk-in endpoint. We assume that
@@ -3464,7 +3450,7 @@ static int __init fsg_bind(struct usb_gadget *gadget)
goto out;
bh->next = bh + 1;
}
- fsg->buffhds[FSG_NUM_BUFFERS - 1].next = &fsg->buffhds[0];
+ fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0];
/* This should reflect the actual gadget power source */
usb_gadget_set_selfpowered(gadget);
@@ -3580,7 +3566,9 @@ static int __init fsg_alloc(void)
{
struct fsg_dev *fsg;
- fsg = kzalloc(sizeof *fsg, GFP_KERNEL);
+ fsg = kzalloc(sizeof *fsg +
+ fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL);
+
if (!fsg)
return -ENOMEM;
spin_lock_init(&fsg->lock);
@@ -3598,6 +3586,10 @@ static int __init fsg_init(void)
int rc;
struct fsg_dev *fsg;
+ rc = fsg_num_buffers_validate();
+ if (rc != 0)
+ return rc;
+
if ((rc = fsg_alloc()) != 0)
return rc;
fsg = the_fsg;
diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c
index 571d9730fca..523626274c0 100644
--- a/drivers/usb/gadget/storage_common.c
+++ b/drivers/usb/gadget/storage_common.c
@@ -43,6 +43,12 @@
* characters rather then a pointer to void.
*/
+/*
+ * When USB_GADGET_DEBUG_FILES is defined the module param num_buffers
+ * sets the number of pipeline buffers (length of the fsg_buffhd array).
+ * The valid range of num_buffers is: num >= 2 && num <= 4.
+ */
+
#include <linux/usb/storage.h>
#include <scsi/scsi.h>
@@ -238,6 +244,8 @@ struct fsg_lun {
u32 sense_data_info;
u32 unit_attention_data;
+ unsigned int blkbits; /* Bits of logical block size of bound block device */
+ unsigned int blksize; /* logical block size of bound block device */
struct device dev;
};
@@ -253,8 +261,31 @@ static struct fsg_lun *fsg_lun_from_dev(struct device *dev)
#define EP0_BUFSIZE 256
#define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */
-/* Number of buffers we will use. 2 is enough for double-buffering */
-#define FSG_NUM_BUFFERS 2
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static unsigned int fsg_num_buffers = CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS;
+module_param_named(num_buffers, fsg_num_buffers, uint, S_IRUGO);
+MODULE_PARM_DESC(num_buffers, "Number of pipeline buffers");
+
+#else
+
+/*
+ * Number of buffers we will use.
+ * 2 is usually enough for good buffering pipeline
+ */
+#define fsg_num_buffers CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS
+
+#endif /* CONFIG_USB_DEBUG */
+
+/* check if fsg_num_buffers is within a valid range */
+static inline int fsg_num_buffers_validate(void)
+{
+ if (fsg_num_buffers >= 2 && fsg_num_buffers <= 4)
+ return 0;
+ pr_err("fsg_num_buffers %u is out of range (%d to %d)\n",
+ fsg_num_buffers, 2 ,4);
+ return -EINVAL;
+}
/* Default size of buffer length. */
#define FSG_BUFLEN ((u32)16384)
@@ -571,13 +602,24 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename)
rc = (int) size;
goto out;
}
- num_sectors = size >> 9; /* File size in 512-byte blocks */
+
+ if (curlun->cdrom) {
+ curlun->blksize = 2048;
+ curlun->blkbits = 11;
+ } else if (inode->i_bdev) {
+ curlun->blksize = bdev_logical_block_size(inode->i_bdev);
+ curlun->blkbits = blksize_bits(curlun->blksize);
+ } else {
+ curlun->blksize = 512;
+ curlun->blkbits = 9;
+ }
+
+ num_sectors = size >> curlun->blkbits; /* File size in logic-block-size blocks */
min_sectors = 1;
if (curlun->cdrom) {
- num_sectors &= ~3; /* Reduce to a multiple of 2048 */
- min_sectors = 300*4; /* Smallest track is 300 frames */
- if (num_sectors >= 256*60*75*4) {
- num_sectors = (256*60*75 - 1) * 4;
+ min_sectors = 300; /* Smallest track is 300 frames */
+ if (num_sectors >= 256*60*75) {
+ num_sectors = 256*60*75 - 1;
LINFO(curlun, "file too big: %s\n", filename);
LINFO(curlun, "using only first %d blocks\n",
(int) num_sectors);
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 3f79e7f9a9e..b08b9cad85a 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -634,6 +634,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
u16 len;
u16 csr = musb_readw(epio, MUSB_RXCSR);
struct musb_hw_ep *hw_ep = &musb->endpoints[epnum];
+ u8 use_mode_1;
if (hw_ep->is_shared_fifo)
musb_ep = &hw_ep->ep_in;
@@ -683,6 +684,18 @@ static void rxstate(struct musb *musb, struct musb_request *req)
if (csr & MUSB_RXCSR_RXPKTRDY) {
len = musb_readw(epio, MUSB_RXCOUNT);
+
+ /*
+ * Enable Mode 1 on RX transfers only when short_not_ok flag
+ * is set. Currently short_not_ok flag is set only from
+ * file_storage and f_mass_storage drivers
+ */
+
+ if (request->short_not_ok && len == musb_ep->packet_sz)
+ use_mode_1 = 1;
+ else
+ use_mode_1 = 0;
+
if (request->actual < request->length) {
#ifdef CONFIG_USB_INVENTRA_DMA
if (is_buffer_mapped(req)) {
@@ -714,37 +727,41 @@ static void rxstate(struct musb *musb, struct musb_request *req)
* then becomes usable as a runtime "use mode 1" hint...
*/
- csr |= MUSB_RXCSR_DMAENAB;
-#ifdef USE_MODE1
- csr |= MUSB_RXCSR_AUTOCLEAR;
- /* csr |= MUSB_RXCSR_DMAMODE; */
-
- /* this special sequence (enabling and then
- * disabling MUSB_RXCSR_DMAMODE) is required
- * to get DMAReq to activate
- */
- musb_writew(epio, MUSB_RXCSR,
- csr | MUSB_RXCSR_DMAMODE);
-#else
- if (!musb_ep->hb_mult &&
- musb_ep->hw_ep->rx_double_buffered)
+ /* Experimental: Mode1 works with mass storage use cases */
+ if (use_mode_1) {
csr |= MUSB_RXCSR_AUTOCLEAR;
-#endif
- musb_writew(epio, MUSB_RXCSR, csr);
+ musb_writew(epio, MUSB_RXCSR, csr);
+ csr |= MUSB_RXCSR_DMAENAB;
+ musb_writew(epio, MUSB_RXCSR, csr);
+
+ /*
+ * this special sequence (enabling and then
+ * disabling MUSB_RXCSR_DMAMODE) is required
+ * to get DMAReq to activate
+ */
+ musb_writew(epio, MUSB_RXCSR,
+ csr | MUSB_RXCSR_DMAMODE);
+ musb_writew(epio, MUSB_RXCSR, csr);
+
+ } else {
+ if (!musb_ep->hb_mult &&
+ musb_ep->hw_ep->rx_double_buffered)
+ csr |= MUSB_RXCSR_AUTOCLEAR;
+ csr |= MUSB_RXCSR_DMAENAB;
+ musb_writew(epio, MUSB_RXCSR, csr);
+ }
if (request->actual < request->length) {
int transfer_size = 0;
-#ifdef USE_MODE1
- transfer_size = min(request->length - request->actual,
- channel->max_len);
-#else
- transfer_size = min(request->length - request->actual,
- (unsigned)len);
-#endif
- if (transfer_size <= musb_ep->packet_sz)
- musb_ep->dma->desired_mode = 0;
- else
+ if (use_mode_1) {
+ transfer_size = min(request->length - request->actual,
+ channel->max_len);
musb_ep->dma->desired_mode = 1;
+ } else {
+ transfer_size = min(request->length - request->actual,
+ (unsigned)len);
+ musb_ep->dma->desired_mode = 0;
+ }
use_dma = c->channel_program(
channel,
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-30 19:27:49 +0000