Merge upstream 2.6.13-rc3 into ieee80211 branch of netdev-2.6.

52 files changed, 2251 insertions, 873 deletions

diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index d79cd218a55..df014c2a7c5 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -65,12 +65,14 @@ obj-$(CONFIG_USB_EMI26)		+= misc/
 obj-$(CONFIG_USB_EMI62)		+= misc/
 obj-$(CONFIG_USB_IDMOUSE)	+= misc/
 obj-$(CONFIG_USB_LCD)		+= misc/
+obj-$(CONFIG_USB_LD)		+= misc/
 obj-$(CONFIG_USB_LED)		+= misc/
 obj-$(CONFIG_USB_LEGOTOWER)	+= misc/
 obj-$(CONFIG_USB_RIO500)	+= misc/
 obj-$(CONFIG_USB_TEST)		+= misc/
 obj-$(CONFIG_USB_USS720)	+= misc/
 obj-$(CONFIG_USB_PHIDGETSERVO)	+= misc/
+obj-$(CONFIG_USB_SISUSBVGA)	+= misc/
 
 obj-$(CONFIG_USB_ATM)		+= atm/
 obj-$(CONFIG_USB_SPEEDTOUCH)	+= atm/
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index cbd4a7d25d0..8e184e2641c 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -427,7 +427,7 @@ static void cxacru_poll_status(struct cxacru_data *instance)
 		atm_dev->link_rate = buf[CXINF_DOWNSTREAM_RATE] * 1000 / 424;
 		atm_dev->signal = ATM_PHY_SIG_FOUND;
 
-		dev_info(dev, "ADSL line: up (%d Kib/s down | %d Kib/s up)\n",
+		dev_info(dev, "ADSL line: up (%d kb/s down | %d kb/s up)\n",
 		     buf[CXINF_DOWNSTREAM_RATE], buf[CXINF_UPSTREAM_RATE]);
 		break;
 
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 6a6eaa2a3b1..d0cbbb7f038 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -100,6 +100,8 @@ struct speedtch_instance_data {
 
 	struct work_struct status_checker;
 
+	unsigned char last_status;
+
 	int poll_delay; /* milliseconds */
 
 	struct timer_list resubmit_timer;
@@ -423,52 +425,48 @@ static void speedtch_check_status(struct speedtch_instance_data *instance)
 	struct usbatm_data *usbatm = instance->usbatm;
 	struct atm_dev *atm_dev = usbatm->atm_dev;
 	unsigned char *buf = instance->scratch_buffer;
-	int ret;
+	int down_speed, up_speed, ret;
+	unsigned char status;
 
 	atm_dbg(usbatm, "%s entered\n", __func__);
 
 	ret = speedtch_read_status(instance);
 	if (ret < 0) {
 		atm_warn(usbatm, "error %d fetching device status\n", ret);
-		if (instance->poll_delay < MAX_POLL_DELAY)
-			instance->poll_delay *= 2;
+		instance->poll_delay = min(2 * instance->poll_delay, MAX_POLL_DELAY);
 		return;
 	}
 
-	if (instance->poll_delay > MIN_POLL_DELAY)
-		instance->poll_delay /= 2;
+	instance->poll_delay = max(instance->poll_delay / 2, MIN_POLL_DELAY);
 
-	atm_dbg(usbatm, "%s: line state %02x\n", __func__, buf[OFFSET_7]);
+	status = buf[OFFSET_7];
 
-	switch (buf[OFFSET_7]) {
-	case 0:
-		if (atm_dev->signal != ATM_PHY_SIG_LOST) {
+	atm_dbg(usbatm, "%s: line state %02x\n", __func__, status);
+
+	if ((status != instance->last_status) || !status) {
+		switch (status) {
+		case 0:
 			atm_dev->signal = ATM_PHY_SIG_LOST;
-			atm_info(usbatm, "ADSL line is down\n");
-			/* It'll never resync again unless we ask it to... */
+			if (instance->last_status)
+				atm_info(usbatm, "ADSL line is down\n");
+			/* It may never resync again unless we ask it to... */
 			ret = speedtch_start_synchro(instance);
-		}
-		break;
+			break;
 
-	case 0x08:
-		if (atm_dev->signal != ATM_PHY_SIG_UNKNOWN) {
+		case 0x08:
 			atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
 			atm_info(usbatm, "ADSL line is blocked?\n");
-		}
-		break;
+			break;
 
-	case 0x10:
-		if (atm_dev->signal != ATM_PHY_SIG_LOST) {
+		case 0x10:
 			atm_dev->signal = ATM_PHY_SIG_LOST;
 			atm_info(usbatm, "ADSL line is synchronising\n");
-		}
-		break;
+			break;
 
-	case 0x20:
-		if (atm_dev->signal != ATM_PHY_SIG_FOUND) {
-			int down_speed = buf[OFFSET_b] | (buf[OFFSET_b + 1] << 8)
+		case 0x20:
+			down_speed = buf[OFFSET_b] | (buf[OFFSET_b + 1] << 8)
 				| (buf[OFFSET_b + 2] << 16) | (buf[OFFSET_b + 3] << 24);
-			int up_speed = buf[OFFSET_b + 4] | (buf[OFFSET_b + 5] << 8)
+			up_speed = buf[OFFSET_b + 4] | (buf[OFFSET_b + 5] << 8)
 				| (buf[OFFSET_b + 6] << 16) | (buf[OFFSET_b + 7] << 24);
 
 			if (!(down_speed & 0x0000ffff) && !(up_speed & 0x0000ffff)) {
@@ -480,17 +478,17 @@ static void speedtch_check_status(struct speedtch_instance_data *instance)
 			atm_dev->signal = ATM_PHY_SIG_FOUND;
 
 			atm_info(usbatm,
-				 "ADSL line is up (%d Kib/s down | %d Kib/s up)\n",
+				 "ADSL line is up (%d kb/s down | %d kb/s up)\n",
 				 down_speed, up_speed);
-		}
-		break;
+			break;
 
-	default:
-		if (atm_dev->signal != ATM_PHY_SIG_UNKNOWN) {
+		default:
 			atm_dev->signal = ATM_PHY_SIG_UNKNOWN;
-			atm_info(usbatm, "Unknown line state %02x\n", buf[OFFSET_7]);
+			atm_info(usbatm, "Unknown line state %02x\n", status);
+			break;
 		}
-		break;
+
+		instance->last_status = status;
 	}
 }
 
@@ -730,6 +728,7 @@ static int speedtch_bind(struct usbatm_data *usbatm,
 
 	instance->status_checker.timer.function = speedtch_status_poll;
 	instance->status_checker.timer.data = (unsigned long)instance;
+	instance->last_status = 0xff;
 	instance->poll_delay = MIN_POLL_DELAY;
 
 	init_timer(&instance->resubmit_timer);
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 69e859e0f51..adff5a77e31 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -422,6 +422,17 @@ bail_out:
 	return -EIO;
 }
 
+static void acm_tty_unregister(struct acm *acm)
+{
+	tty_unregister_device(acm_tty_driver, acm->minor);
+	usb_put_intf(acm->control);
+	acm_table[acm->minor] = NULL;
+	usb_free_urb(acm->ctrlurb);
+	usb_free_urb(acm->readurb);
+	usb_free_urb(acm->writeurb);
+	kfree(acm);
+}
+
 static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 {
 	struct acm *acm = tty->driver_data;
@@ -436,14 +447,8 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 			usb_kill_urb(acm->ctrlurb);
 			usb_kill_urb(acm->writeurb);
 			usb_kill_urb(acm->readurb);
-		} else {
-			tty_unregister_device(acm_tty_driver, acm->minor);
-			acm_table[acm->minor] = NULL;
-			usb_free_urb(acm->ctrlurb);
-			usb_free_urb(acm->readurb);
-			usb_free_urb(acm->writeurb);
-			kfree(acm);
-		}
+		} else
+			acm_tty_unregister(acm);
 	}
 	up(&open_sem);
 }
@@ -905,7 +910,8 @@ skip_normal_probe:
 
 	usb_driver_claim_interface(&acm_driver, data_interface, acm);
 
-	tty_register_device(acm_tty_driver, minor, &intf->dev);
+	usb_get_intf(control_interface);
+	tty_register_device(acm_tty_driver, minor, &control_interface->dev);
 
 	acm_table[minor] = acm;
 	usb_set_intfdata (intf, acm);
@@ -954,12 +960,7 @@ static void acm_disconnect(struct usb_interface *intf)
 	usb_driver_release_interface(&acm_driver, acm->data);
 
 	if (!acm->used) {
-		tty_unregister_device(acm_tty_driver, acm->minor);
-		acm_table[acm->minor] = NULL;
-		usb_free_urb(acm->ctrlurb);
-		usb_free_urb(acm->readurb);
-		usb_free_urb(acm->writeurb);
-		kfree(acm);
+		acm_tty_unregister(acm);
 		up(&open_sem);
 		return;
 	}
diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c
index b7827df21f4..fc15b4acc8a 100644
--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -106,7 +106,7 @@ void hcd_buffer_destroy (struct usb_hcd *hcd)
 void *hcd_buffer_alloc (
 	struct usb_bus 		*bus,
 	size_t			size,
-	int			mem_flags,
+	unsigned		mem_flags,
 	dma_addr_t		*dma
 )
 {
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 71b4a8d6631..fc056062c96 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -380,6 +380,7 @@ int usb_hcd_pci_resume (struct pci_dev *dev)
 		usb_hc_died (hcd);
 	}
 
+	pci_enable_device(dev);
 	return retval;
 }
 EXPORT_SYMBOL (usb_hcd_pci_resume);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 83e732a0d64..8616356f55e 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1112,7 +1112,7 @@ static void urb_unlink (struct urb *urb)
  * expects usb_submit_urb() to have sanity checked and conditioned all
  * inputs in the urb
  */
-static int hcd_submit_urb (struct urb *urb, int mem_flags)
+static int hcd_submit_urb (struct urb *urb, unsigned mem_flags)
 {
 	int			status;
 	struct usb_hcd		*hcd = urb->dev->bus->hcpriv;
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 8dc13cde2f7..67db4a999b9 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -142,12 +142,12 @@ struct hcd_timeout {	/* timeouts we allocate */
 
 struct usb_operations {
 	int (*get_frame_number) (struct usb_device *usb_dev);
-	int (*submit_urb) (struct urb *urb, int mem_flags);
+	int (*submit_urb) (struct urb *urb, unsigned mem_flags);
 	int (*unlink_urb) (struct urb *urb, int status);
 
 	/* allocate dma-consistent buffer for URB_DMA_NOMAPPING */
 	void *(*buffer_alloc)(struct usb_bus *bus, size_t size,
-			int mem_flags,
+			unsigned mem_flags,
 			dma_addr_t *dma);
 	void (*buffer_free)(struct usb_bus *bus, size_t size,
 			void *addr, dma_addr_t dma);
@@ -200,7 +200,7 @@ struct hc_driver {
 	int	(*urb_enqueue) (struct usb_hcd *hcd,
 					struct usb_host_endpoint *ep,
 					struct urb *urb,
-					int mem_flags);
+					unsigned mem_flags);
 	int	(*urb_dequeue) (struct usb_hcd *hcd, struct urb *urb);
 
 	/* hw synch, freeing endpoint resources that urb_dequeue can't */
@@ -247,7 +247,7 @@ int hcd_buffer_create (struct usb_hcd *hcd);
 void hcd_buffer_destroy (struct usb_hcd *hcd);
 
 void *hcd_buffer_alloc (struct usb_bus *bus, size_t size,
-	int mem_flags, dma_addr_t *dma);
+	unsigned mem_flags, dma_addr_t *dma);
 void hcd_buffer_free (struct usb_bus *bus, size_t size,
 	void *addr, dma_addr_t dma);
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 32ff3218185..c3e46d24a37 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -26,6 +26,7 @@
 #include <linux/ioctl.h>
 #include <linux/usb.h>
 #include <linux/usbdevice_fs.h>
+#include <linux/kthread.h>
 
 #include <asm/semaphore.h>
 #include <asm/uaccess.h>
@@ -47,8 +48,7 @@ static LIST_HEAD(hub_event_list);	/* List of hubs needing servicing */
 /* Wakes up khubd */
 static DECLARE_WAIT_QUEUE_HEAD(khubd_wait);
 
-static pid_t khubd_pid = 0;			/* PID of khubd */
-static DECLARE_COMPLETION(khubd_exited);
+static struct task_struct *khubd_task;
 
 /* cycle leds on hubs that aren't blinking for attention */
 static int blinkenlights = 0;
@@ -2807,23 +2807,16 @@ loop:
 
 static int hub_thread(void *__unused)
 {
-	/*
-	 * This thread doesn't need any user-level access,
-	 * so get rid of all our resources
-	 */
-
-	daemonize("khubd");
-	allow_signal(SIGKILL);
-
-	/* Send me a signal to get me die (for debugging) */
 	do {
 		hub_events();
-		wait_event_interruptible(khubd_wait, !list_empty(&hub_event_list)); 
+		wait_event_interruptible(khubd_wait,
+				!list_empty(&hub_event_list) ||
+				kthread_should_stop());
 		try_to_freeze();
-	} while (!signal_pending(current));
+	} while (!kthread_should_stop() || !list_empty(&hub_event_list));
 
-	pr_debug ("%s: khubd exiting\n", usbcore_name);
-	complete_and_exit(&khubd_exited, 0);
+	pr_debug("%s: khubd exiting\n", usbcore_name);
+	return 0;
 }
 
 static struct usb_device_id hub_id_table [] = {
@@ -2849,20 +2842,15 @@ static struct usb_driver hub_driver = {
 
 int usb_hub_init(void)
 {
-	pid_t pid;
-
 	if (usb_register(&hub_driver) < 0) {
 		printk(KERN_ERR "%s: can't register hub driver\n",
 			usbcore_name);
 		return -1;
 	}
 
-	pid = kernel_thread(hub_thread, NULL, CLONE_KERNEL);
-	if (pid >= 0) {
-		khubd_pid = pid;
-
+	khubd_task = kthread_run(hub_thread, NULL, "khubd");
+	if (!IS_ERR(khubd_task))
 		return 0;
-	}
 
 	/* Fall through if kernel_thread failed */
 	usb_deregister(&hub_driver);
@@ -2873,12 +2861,7 @@ int usb_hub_init(void)
 
 void usb_hub_cleanup(void)
 {
-	int ret;
-
-	/* Kill the thread */
-	ret = kill_proc(khubd_pid, SIGKILL, 1);
-
-	wait_for_completion(&khubd_exited);
+	kthread_stop(khubd_task);
 
 	/*
 	 * Hub resources are freed for us by usb_deregister. It calls
@@ -2890,7 +2873,6 @@ void usb_hub_cleanup(void)
 	usb_deregister(&hub_driver);
 } /* usb_hub_cleanup() */
 
-
 static int config_descriptors_changed(struct usb_device *udev)
 {
 	unsigned			index;
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index f50aaf25c98..a428ef479bd 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -320,7 +320,7 @@ int usb_sg_init (
 	struct scatterlist	*sg,
 	int			nents,
 	size_t			length,
-	int			mem_flags
+	unsigned		mem_flags
 )
 {
 	int			i;
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 740cb4c668d..00297f11384 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -196,6 +196,7 @@ usb_descriptor_attr (bDeviceClass, "%02x\n")
 usb_descriptor_attr (bDeviceSubClass, "%02x\n")
 usb_descriptor_attr (bDeviceProtocol, "%02x\n")
 usb_descriptor_attr (bNumConfigurations, "%d\n")
+usb_descriptor_attr (bMaxPacketSize0, "%d\n")
 
 static struct attribute *dev_attrs[] = {
 	/* current configuration's attributes */
@@ -211,6 +212,7 @@ static struct attribute *dev_attrs[] = {
 	&dev_attr_bDeviceSubClass.attr,
 	&dev_attr_bDeviceProtocol.attr,
 	&dev_attr_bNumConfigurations.attr,
+	&dev_attr_bMaxPacketSize0.attr,
 	&dev_attr_speed.attr,
 	&dev_attr_devnum.attr,
 	&dev_attr_version.attr,
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 0faf18d511d..c0feee25ff0 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -60,7 +60,7 @@ void usb_init_urb(struct urb *urb)
  *
  * The driver must call usb_free_urb() when it is finished with the urb.
  */
-struct urb *usb_alloc_urb(int iso_packets, int mem_flags)
+struct urb *usb_alloc_urb(int iso_packets, unsigned mem_flags)
 {
 	struct urb *urb;
 
@@ -224,7 +224,7 @@ struct urb * usb_get_urb(struct urb *urb)
  *      GFP_NOIO, unless b) or c) apply
  *
  */
-int usb_submit_urb(struct urb *urb, int mem_flags)
+int usb_submit_urb(struct urb *urb, unsigned mem_flags)
 {
 	int			pipe, temp, max;
 	struct usb_device	*dev;
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index a3c42203213..99c85d2f92d 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1129,7 +1129,7 @@ int __usb_get_extra_descriptor(char *buffer, unsigned size,
 void *usb_buffer_alloc (
 	struct usb_device *dev,
 	size_t size,
-	int mem_flags,
+	unsigned mem_flags,
 	dma_addr_t *dma
 )
 {
@@ -1532,6 +1532,9 @@ EXPORT_SYMBOL(usb_register);
 EXPORT_SYMBOL(usb_deregister);
 EXPORT_SYMBOL(usb_disabled);
 
+EXPORT_SYMBOL_GPL(usb_get_intf);
+EXPORT_SYMBOL_GPL(usb_put_intf);
+
 EXPORT_SYMBOL(usb_alloc_dev);
 EXPORT_SYMBOL(usb_put_dev);
 EXPORT_SYMBOL(usb_get_dev);
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 4d692670f28..583db7c38cf 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -470,7 +470,7 @@ static int dummy_disable (struct usb_ep *_ep)
 }
 
 static struct usb_request *
-dummy_alloc_request (struct usb_ep *_ep, int mem_flags)
+dummy_alloc_request (struct usb_ep *_ep, unsigned mem_flags)
 {
 	struct dummy_ep		*ep;
 	struct dummy_request	*req;
@@ -507,7 +507,7 @@ dummy_alloc_buffer (
 	struct usb_ep *_ep,
 	unsigned bytes,
 	dma_addr_t *dma,
-	int mem_flags
+	unsigned mem_flags
 ) {
 	char			*retval;
 	struct dummy_ep		*ep;
@@ -540,7 +540,8 @@ fifo_complete (struct usb_ep *ep, struct usb_request *req)
 }
 
 static int
-dummy_queue (struct usb_ep *_ep, struct usb_request *_req, int mem_flags)
+dummy_queue (struct usb_ep *_ep, struct usb_request *_req,
+		unsigned mem_flags)
 {
 	struct dummy_ep		*ep;
 	struct dummy_request	*req;
@@ -998,7 +999,7 @@ static int dummy_urb_enqueue (
 	struct usb_hcd			*hcd,
 	struct usb_host_endpoint	*ep,
 	struct urb			*urb,
-	int				mem_flags
+	unsigned			mem_flags
 ) {
 	struct dummy	*dum;
 	struct urbp	*urbp;
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 5bb53ae8896..8509e955007 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -945,15 +945,16 @@ config_buf (enum usb_device_speed speed,
 
 /*-------------------------------------------------------------------------*/
 
-static void eth_start (struct eth_dev *dev, int gfp_flags);
-static int alloc_requests (struct eth_dev *dev, unsigned n, int gfp_flags);
+static void eth_start (struct eth_dev *dev, unsigned gfp_flags);
+static int alloc_requests (struct eth_dev *dev, unsigned n, unsigned gfp_flags);
 
 static int
-set_ether_config (struct eth_dev *dev, int gfp_flags)
+set_ether_config (struct eth_dev *dev, unsigned gfp_flags)
 {
 	int					result = 0;
 	struct usb_gadget			*gadget = dev->gadget;
 
+#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
 	/* status endpoint used for RNDIS and (optionally) CDC */
 	if (!subset_active(dev) && dev->status_ep) {
 		dev->status = ep_desc (gadget, &hs_status_desc,
@@ -967,6 +968,7 @@ set_ether_config (struct eth_dev *dev, int gfp_flags)
 			goto done;
 		}
 	}
+#endif
 
 	dev->in = ep_desc (dev->gadget, &hs_source_desc, &fs_source_desc);
 	dev->in_ep->driver_data = dev;
@@ -1079,7 +1081,7 @@ static void eth_reset_config (struct eth_dev *dev)
  * that returns config descriptors, and altsetting code.
  */
 static int
-eth_set_config (struct eth_dev *dev, unsigned number, int gfp_flags)
+eth_set_config (struct eth_dev *dev, unsigned number, unsigned gfp_flags)
 {
 	int			result = 0;
 	struct usb_gadget	*gadget = dev->gadget;
@@ -1596,7 +1598,7 @@ static void defer_kevent (struct eth_dev *dev, int flag)
 static void rx_complete (struct usb_ep *ep, struct usb_request *req);
 
 static int
-rx_submit (struct eth_dev *dev, struct usb_request *req, int gfp_flags)
+rx_submit (struct eth_dev *dev, struct usb_request *req, unsigned gfp_flags)
 {
 	struct sk_buff		*skb;
 	int			retval = -ENOMEM;
@@ -1722,7 +1724,7 @@ clean:
 }
 
 static int prealloc (struct list_head *list, struct usb_ep *ep,
-			unsigned n, int gfp_flags)
+			unsigned n, unsigned gfp_flags)
 {
 	unsigned		i;
 	struct usb_request	*req;
@@ -1761,7 +1763,7 @@ extra:
 	return 0;
 }
 
-static int alloc_requests (struct eth_dev *dev, unsigned n, int gfp_flags)
+static int alloc_requests (struct eth_dev *dev, unsigned n, unsigned gfp_flags)
 {
 	int status;
 
@@ -1777,7 +1779,7 @@ fail:
 	return status;
 }
 
-static void rx_fill (struct eth_dev *dev, int gfp_flags)
+static void rx_fill (struct eth_dev *dev, unsigned gfp_flags)
 {
 	struct usb_request	*req;
 	unsigned long		flags;
@@ -2022,7 +2024,7 @@ static int rndis_control_ack (struct net_device *net)
 
 #endif	/* RNDIS */
 
-static void eth_start (struct eth_dev *dev, int gfp_flags)
+static void eth_start (struct eth_dev *dev, unsigned gfp_flags)
 {
 	DEBUG (dev, "%s\n", __FUNCTION__);
 
@@ -2428,7 +2430,7 @@ autoconf_fail:
 	dev->req->complete = eth_setup_complete;
 
 	/* ... and maybe likewise for status transfer */
-#ifdef DEV_CONFIG_CDC
+#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
 	if (dev->status_ep) {
 		dev->stat_req = eth_req_alloc (dev->status_ep,
 					STATUS_BYTECOUNT, GFP_KERNEL);
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
index ed773a9111d..eaab26f4ed3 100644
--- a/drivers/usb/gadget/goku_udc.c
+++ b/drivers/usb/gadget/goku_udc.c
@@ -269,7 +269,7 @@ static int goku_ep_disable(struct usb_ep *_ep)
 /*-------------------------------------------------------------------------*/
 
 static struct usb_request *
-goku_alloc_request(struct usb_ep *_ep, int gfp_flags)
+goku_alloc_request(struct usb_ep *_ep, unsigned gfp_flags)
 {
 	struct goku_request	*req;
 
@@ -327,7 +327,7 @@ goku_free_request(struct usb_ep *_ep, struct usb_request *_req)
  */
 static void *
 goku_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
-			dma_addr_t *dma, int  gfp_flags)
+			dma_addr_t *dma, unsigned gfp_flags)
 {
 	void		*retval;
 	struct goku_ep	*ep;
@@ -789,7 +789,7 @@ finished:
 /*-------------------------------------------------------------------------*/
 
 static int
-goku_queue(struct usb_ep *_ep, struct usb_request *_req, int gfp_flags)
+goku_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags)
 {
 	struct goku_request	*req;
 	struct goku_ep		*ep;
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index df75ab65a5e..4842577789c 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -1106,7 +1106,7 @@ static int lh7a40x_ep_disable(struct usb_ep *_ep)
 }
 
 static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep,
-						 int gfp_flags)
+						 unsigned gfp_flags)
 {
 	struct lh7a40x_request *req;
 
@@ -1134,7 +1134,7 @@ static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *_req)
 }
 
 static void *lh7a40x_alloc_buffer(struct usb_ep *ep, unsigned bytes,
-				  dma_addr_t * dma, int gfp_flags)
+				  dma_addr_t * dma, unsigned gfp_flags)
 {
 	char *retval;
 
@@ -1158,7 +1158,7 @@ static void lh7a40x_free_buffer(struct usb_ep *ep, void *buf, dma_addr_t dma,
  *  NOTE: Sets INDEX register
  */
 static int lh7a40x_queue(struct usb_ep *_ep, struct usb_request *_req,
-			 int gfp_flags)
+			 unsigned gfp_flags)
 {
 	struct lh7a40x_request *req;
 	struct lh7a40x_ep *ep;
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 13a3dbc9949..477fab2e74d 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -376,7 +376,7 @@ static int net2280_disable (struct usb_ep *_ep)
 /*-------------------------------------------------------------------------*/
 
 static struct usb_request *
-net2280_alloc_request (struct usb_ep *_ep, int gfp_flags)
+net2280_alloc_request (struct usb_ep *_ep, unsigned gfp_flags)
 {
 	struct net2280_ep	*ep;
 	struct net2280_request	*req;
@@ -463,7 +463,7 @@ net2280_alloc_buffer (
 	struct usb_ep		*_ep,
 	unsigned		bytes,
 	dma_addr_t		*dma,
-	int			gfp_flags
+	unsigned		gfp_flags
 )
 {
 	void			*retval;
@@ -897,7 +897,7 @@ done (struct net2280_ep *ep, struct net2280_request *req, int status)
 /*-------------------------------------------------------------------------*/
 
 static int
-net2280_queue (struct usb_ep *_ep, struct usb_request *_req, int gfp_flags)
+net2280_queue (struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags)
 {
 	struct net2280_request	*req;
 	struct net2280_ep	*ep;
@@ -1490,7 +1490,7 @@ show_registers (struct device *_dev, struct device_attribute *attr, char *buf)
 	unsigned long		flags;
 	int			i;
 	u32			t1, t2;
-	char			*s;
+	const char		*s;
 
 	dev = dev_get_drvdata (_dev);
 	next = buf;
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index a2b812af6e6..ff5533e6956 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -269,7 +269,7 @@ static int omap_ep_disable(struct usb_ep *_ep)
 /*-------------------------------------------------------------------------*/
 
 static struct usb_request *
-omap_alloc_request(struct usb_ep *ep, int gfp_flags)
+omap_alloc_request(struct usb_ep *ep, unsigned gfp_flags)
 {
 	struct omap_req	*req;
 
@@ -298,7 +298,7 @@ omap_alloc_buffer(
 	struct usb_ep	*_ep,
 	unsigned	bytes,
 	dma_addr_t	*dma,
-	int		gfp_flags
+	unsigned	gfp_flags
 )
 {
 	void		*retval;
@@ -937,7 +937,7 @@ static void dma_channel_release(struct omap_ep *ep)
 /*-------------------------------------------------------------------------*/
 
 static int
-omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, int gfp_flags)
+omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags)
 {
 	struct omap_ep	*ep = container_of(_ep, struct omap_ep, ep);
 	struct omap_req	*req = container_of(_req, struct omap_req, req);
@@ -2908,6 +2908,7 @@ static int __exit omap_udc_remove(struct device *dev)
  * make host resumes and VBUS detection trigger OMAP wakeup events; that
  * may involve talking to an external transceiver (e.g. isp1301).
  */
+
 static int omap_udc_suspend(struct device *dev, pm_message_t message, u32 level)
 {
 	u32	devstat;
@@ -2936,8 +2937,6 @@ static int omap_udc_resume(struct device *dev, u32 level)
 		return 0;
 
 	DBG("resume + wakeup/SRP\n");
-	udc->gadget.dev.parent->power.power_state = PMSG_ON;
-	udc->gadget.dev.power.power_state = PMSG_ON;
 	omap_pullup(&udc->gadget, 1);
 
 	/* maybe the host would enumerate us if we nudged it */
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 6a0b957af33..1507738337c 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -332,7 +332,7 @@ static int pxa2xx_ep_disable (struct usb_ep *_ep)
  * 	pxa2xx_ep_alloc_request - allocate a request data structure
  */
 static struct usb_request *
-pxa2xx_ep_alloc_request (struct usb_ep *_ep, int gfp_flags)
+pxa2xx_ep_alloc_request (struct usb_ep *_ep, unsigned gfp_flags)
 {
 	struct pxa2xx_request *req;
 
@@ -367,7 +367,7 @@ pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
  */
 static void *
 pxa2xx_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
-	dma_addr_t *dma, int gfp_flags)
+	dma_addr_t *dma, unsigned gfp_flags)
 {
 	char			*retval;
 
@@ -874,7 +874,7 @@ done:
 /*-------------------------------------------------------------------------*/
 
 static int
-pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, int gfp_flags)
+pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags)
 {
 	struct pxa2xx_request	*req;
 	struct pxa2xx_ep	*ep;
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index a6e035e2447..bb9b2d94eed 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -612,7 +612,7 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
 }
 
 static struct usb_request *
-source_sink_start_ep (struct usb_ep *ep, int gfp_flags)
+source_sink_start_ep (struct usb_ep *ep, unsigned gfp_flags)
 {
 	struct usb_request	*req;
 	int			status;
@@ -640,7 +640,7 @@ source_sink_start_ep (struct usb_ep *ep, int gfp_flags)
 }
 
 static int
-set_source_sink_config (struct zero_dev *dev, int gfp_flags)
+set_source_sink_config (struct zero_dev *dev, unsigned gfp_flags)
 {
 	int			result = 0;
 	struct usb_ep		*ep;
@@ -744,7 +744,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
 }
 
 static int
-set_loopback_config (struct zero_dev *dev, int gfp_flags)
+set_loopback_config (struct zero_dev *dev, unsigned gfp_flags)
 {
 	int			result = 0;
 	struct usb_ep		*ep;
@@ -845,7 +845,7 @@ static void zero_reset_config (struct zero_dev *dev)
  * by limiting configuration choices (like the pxa2xx).
  */
 static int
-zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags)
+zero_set_config (struct zero_dev *dev, unsigned number, unsigned gfp_flags)
 {
 	int			result = 0;
 	struct usb_gadget	*gadget = dev->gadget;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 35248a37b71..149b13fc0a7 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -960,7 +960,7 @@ static int ehci_urb_enqueue (
 	struct usb_hcd	*hcd,
 	struct usb_host_endpoint *ep,
 	struct urb	*urb,
-	int		mem_flags
+	unsigned	mem_flags
 ) {
 	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
 	struct list_head	qtd_list;
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 45d89a7083b..d74b2d68a50 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -898,7 +898,7 @@ submit_async (
 	struct usb_host_endpoint *ep,
 	struct urb		*urb,
 	struct list_head	*qtd_list,
-	int			mem_flags
+	unsigned		mem_flags
 ) {
 	struct ehci_qtd		*qtd;
 	int			epnum;
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index c2104cad403..9af4f64532a 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -588,7 +588,7 @@ static int intr_submit (
 	struct usb_host_endpoint *ep,
 	struct urb		*urb,
 	struct list_head	*qtd_list,
-	int			mem_flags
+	unsigned		mem_flags
 ) {
 	unsigned		epnum;
 	unsigned long		flags;
@@ -633,7 +633,7 @@ done:
 /* ehci_iso_stream ops work with both ITD and SITD */
 
 static struct ehci_iso_stream *
-iso_stream_alloc (int mem_flags)
+iso_stream_alloc (unsigned mem_flags)
 {
 	struct ehci_iso_stream *stream;
 
@@ -846,7 +846,7 @@ iso_stream_find (struct ehci_hcd *ehci, struct urb *urb)
 /* ehci_iso_sched ops can be ITD-only or SITD-only */
 
 static struct ehci_iso_sched *
-iso_sched_alloc (unsigned packets, int mem_flags)
+iso_sched_alloc (unsigned packets, unsigned mem_flags)
 {
 	struct ehci_iso_sched	*iso_sched;
 	int			size = sizeof *iso_sched;
@@ -919,7 +919,7 @@ itd_urb_transaction (
 	struct ehci_iso_stream	*stream,
 	struct ehci_hcd		*ehci,
 	struct urb		*urb,
-	int			mem_flags
+	unsigned		mem_flags
 )
 {
 	struct ehci_itd		*itd;
@@ -1412,7 +1412,8 @@ itd_complete (
 
 /*-------------------------------------------------------------------------*/
 
-static int itd_submit (struct ehci_hcd *ehci, struct urb *urb, int mem_flags)
+static int itd_submit (struct ehci_hcd *ehci, struct urb *urb,
+	unsigned mem_flags)
 {
 	int			status = -EINVAL;
 	unsigned long		flags;
@@ -1523,7 +1524,7 @@ sitd_urb_transaction (
 	struct ehci_iso_stream	*stream,
 	struct ehci_hcd		*ehci,
 	struct urb		*urb,
-	int			mem_flags
+	unsigned		mem_flags
 )
 {
 	struct ehci_sitd	*sitd;
@@ -1772,7 +1773,8 @@ sitd_complete (
 }
 
 
-static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb, int mem_flags)
+static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb,
+	unsigned mem_flags)
 {
 	int			status = -EINVAL;
 	unsigned long		flags;
@@ -1822,7 +1824,8 @@ done:
 #else
 
 static inline int
-sitd_submit (struct ehci_hcd *ehci, struct urb *urb, int mem_flags)
+sitd_submit (struct ehci_hcd *ehci, struct urb *urb,
+	unsigned mem_flags)
 {
 	ehci_dbg (ehci, "split iso support is disabled\n");
 	return -ENOSYS;
diff --git a/drivers/usb/host/hc_crisv10.c b/drivers/usb/host/hc_crisv10.c
index d9883d774d3..81f8f6b7fdc 100644
--- a/drivers/usb/host/hc_crisv10.c
+++ b/drivers/usb/host/hc_crisv10.c
@@ -463,7 +463,8 @@ static void etrax_usb_free_epid(int epid);
 
 static int etrax_remove_from_sb_list(struct urb *urb);
 
-static void* etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size, int mem_flags, dma_addr_t *dma);
+static void* etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size,
+	unsigned mem_flags, dma_addr_t *dma);
 static void etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma);
 
 static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid);
@@ -476,7 +477,7 @@ static int etrax_usb_submit_ctrl_urb(struct urb *urb);
 static int etrax_usb_submit_intr_urb(struct urb *urb);
 static int etrax_usb_submit_isoc_urb(struct urb *urb);
 
-static int etrax_usb_submit_urb(struct urb *urb, int mem_flags);
+static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags);
 static int etrax_usb_unlink_urb(struct urb *urb, int status);
 static int etrax_usb_get_frame_number(struct usb_device *usb_dev);
 
@@ -1262,7 +1263,7 @@ static int etrax_usb_allocate_epid(void)
 	return -1;
 }
 
-static int etrax_usb_submit_urb(struct urb *urb, int mem_flags)
+static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags)
 {
 	etrax_hc_t *hc;
 	int ret = -EINVAL;
@@ -4277,7 +4278,8 @@ etrax_usb_bulk_eot_timer_func(unsigned long dummy)
 }
 
 static void*
-etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size, int mem_flags, dma_addr_t *dma)
+etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size,
+	unsigned mem_flags, dma_addr_t *dma)
 {
   return kmalloc(size, mem_flags);
 }
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index ff0a168e8ee..50b1970fe6b 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -17,7 +17,7 @@
  * The driver basically works. A number of people have used it with a range
  * of devices.
  *
- *The driver passes all usbtests 1-14.
+ * The driver passes all usbtests 1-14.
  *
  * Suspending/resuming of root hub via sysfs works. Remote wakeup works too.
  * And suspending/resuming of platform device works too. Suspend/resume
@@ -229,7 +229,7 @@ static void preproc_atl_queue(struct isp116x *isp116x)
 	struct isp116x_ep *ep;
 	struct urb *urb;
 	struct ptd *ptd;
-	u16 toggle, dir, len;
+	u16 toggle = 0, dir = PTD_DIR_SETUP, len;
 
 	for (ep = isp116x->atl_active; ep; ep = ep->active) {
 		BUG_ON(list_empty(&ep->hep->urb_list));
@@ -251,8 +251,6 @@ static void preproc_atl_queue(struct isp116x *isp116x)
 			dir = PTD_DIR_OUT;
 			break;
 		case USB_PID_SETUP:
-			toggle = 0;
-			dir = PTD_DIR_SETUP;
 			len = sizeof(struct usb_ctrlrequest);
 			ep->data = urb->setup_packet;
 			break;
@@ -264,11 +262,9 @@ static void preproc_atl_queue(struct isp116x *isp116x)
 			    ? PTD_DIR_OUT : PTD_DIR_IN;
 			break;
 		default:
-			/* To please gcc */
-			toggle = dir = 0;
 			ERR("%s %d: ep->nextpid %d\n", __func__, __LINE__,
 			    ep->nextpid);
-			BUG_ON(1);
+			BUG();
 		}
 
 		ptd->count = PTD_CC_MSK | PTD_ACTIVE_MSK | PTD_TOGGLE(toggle);
@@ -697,7 +693,7 @@ static int balance(struct isp116x *isp116x, u16 period, u16 load)
 
 static int isp116x_urb_enqueue(struct usb_hcd *hcd,
 			       struct usb_host_endpoint *hep, struct urb *urb,
-			       int mem_flags)
+			       unsigned mem_flags)
 {
 	struct isp116x *isp116x = hcd_to_isp116x(hcd);
 	struct usb_device *udev = urb->dev;
@@ -719,7 +715,7 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd,
 	}
 	/* avoid all allocations within spinlocks: request or endpoint */
 	if (!hep->hcpriv) {
-		ep = kcalloc(1, sizeof *ep, (__force unsigned)mem_flags);
+		ep = kcalloc(1, sizeof *ep, mem_flags);
 		if (!ep)
 			return -ENOMEM;
 	}
@@ -1054,7 +1050,7 @@ static int isp116x_hub_control(struct usb_hcd *hcd,
 		break;
 	case GetHubStatus:
 		DBG("GetHubStatus\n");
-		*(__le32 *) buf = cpu_to_le32(0);
+		*(__le32 *) buf = 0;
 		break;
 	case GetPortStatus:
 		DBG("GetPortStatus\n");
@@ -1810,9 +1806,9 @@ static int isp116x_suspend(struct device *dev, pm_message_t state, u32 phase)
 	ret = usb_suspend_device(hcd->self.root_hub, state);
 	if (!ret) {
 		dev->power.power_state = state;
-		INFO("%s suspended\n", (char *)hcd_name);
+		INFO("%s suspended\n", hcd_name);
 	} else
-		ERR("%s suspend failed\n", (char *)hcd_name);
+		ERR("%s suspend failed\n", hcd_name);
 
 	return ret;
 }
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 13cd2177b55..68decab280d 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -180,7 +180,7 @@ static int ohci_urb_enqueue (
 	struct usb_hcd	*hcd,
 	struct usb_host_endpoint *ep,
 	struct urb	*urb,
-	int		mem_flags
+	unsigned	mem_flags
 ) {
 	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
 	struct ed	*ed;
@@ -673,8 +673,10 @@ retry:
 
 	ohci_dump (ohci, 1);
 
-	if (ohci_to_hcd(ohci)->self.root_hub == NULL)
+	if (ohci_to_hcd(ohci)->self.root_hub == NULL) {
+		register_reboot_notifier (&ohci->reboot_notifier);
 		create_debug_files (ohci);
+	}
 
 	return 0;
 }
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index e2fc4129dfc..83ca4549a50 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -419,10 +419,11 @@ ohci_hub_descriptor (
 
 	/* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
 	rh = roothub_b (ohci);
+	memset(desc->bitmap, 0xff, sizeof(desc->bitmap));
 	desc->bitmap [0] = rh & RH_B_DR;
 	if (ports > 7) {
 		desc->bitmap [1] = (rh & RH_B_DR) >> 8;
-		desc->bitmap [2] = desc->bitmap [3] = 0xff;
+		desc->bitmap [2] = 0xff;
 	} else
 		desc->bitmap [1] = 0xff;
 }
diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c
index 23735a36af0..fd3c4d3714b 100644
--- a/drivers/usb/host/ohci-mem.c
+++ b/drivers/usb/host/ohci-mem.c
@@ -84,7 +84,7 @@ dma_to_td (struct ohci_hcd *hc, dma_addr_t td_dma)
 
 /* TDs ... */
 static struct td *
-td_alloc (struct ohci_hcd *hc, int mem_flags)
+td_alloc (struct ohci_hcd *hc, unsigned mem_flags)
 {
 	dma_addr_t	dma;
 	struct td	*td;
@@ -118,7 +118,7 @@ td_free (struct ohci_hcd *hc, struct td *td)
 
 /* EDs ... */
 static struct ed *
-ed_alloc (struct ohci_hcd *hc, int mem_flags)
+ed_alloc (struct ohci_hcd *hc, unsigned mem_flags)
 {
 	dma_addr_t	dma;
 	struct ed	*ed;
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index b62d6993769..5cde76faab9 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -456,34 +456,22 @@ static int ohci_hcd_omap_drv_remove(struct device *dev)
 
 #ifdef	CONFIG_PM
 
-/* states match PCI usage, always suspending the root hub except that
- * 4 ~= D3cold (ACPI D3) with clock off (resume sees reset).
- *
- * FIXME: above comment is not right, and code is wrong, too :-(.
- */
-
-static int ohci_omap_suspend(struct device *dev, pm_message_t state, u32 level)
+static int ohci_omap_suspend(struct device *dev, pm_message_t message, u32 level)
 {
 	struct ohci_hcd	*ohci = hcd_to_ohci(dev_get_drvdata(dev));
 	int		status = -EINVAL;
 
 	if (level != SUSPEND_POWER_DOWN)
 		return 0;
-	if (state <= dev->power.power_state)
-		return 0;
 
-	dev_dbg(dev, "suspend to %d\n", state);
 	down(&ohci_to_hcd(ohci)->self.root_hub->serialize);
 	status = ohci_hub_suspend(ohci_to_hcd(ohci));
 	if (status == 0) {
-		if (state >= 4) {
-			omap_ohci_clock_power(0);
-			ohci_to_hcd(ohci)->self.root_hub->state =
-					USB_STATE_SUSPENDED;
-			state = 4;
-		}
+		omap_ohci_clock_power(0);
+		ohci_to_hcd(ohci)->self.root_hub->state =
+			USB_STATE_SUSPENDED;
 		ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
-		dev->power.power_state = state;
+		dev->power.power_state = PMSG_SUSPEND;
 	}
 	up(&ohci_to_hcd(ohci)->self.root_hub->serialize);
 	return status;
@@ -497,29 +485,20 @@ static int ohci_omap_resume(struct device *dev, u32 level)
 	if (level != RESUME_POWER_ON)
 		return 0;
 
-	switch (dev->power.power_state) {
-	case 0:
-		break;
-	case 4:
-		if (time_before(jiffies, ohci->next_statechange))
-			msleep(5);
-		ohci->next_statechange = jiffies;
-		omap_ohci_clock_power(1);
-		/* FALLTHROUGH */
-	default:
-		dev_dbg(dev, "resume from %d\n", dev->power.power_state);
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+	omap_ohci_clock_power(1);
 #ifdef	CONFIG_USB_SUSPEND
-		/* get extra cleanup even if remote wakeup isn't in use */
-		status = usb_resume_device(ohci_to_hcd(ohci)->self.root_hub);
+	/* get extra cleanup even if remote wakeup isn't in use */
+	status = usb_resume_device(ohci_to_hcd(ohci)->self.root_hub);
 #else
-		down(&ohci_to_hcd(ohci)->self.root_hub->serialize);
-		status = ohci_hub_resume(ohci_to_hcd(ohci));
-		up(&ohci_to_hcd(ohci)->self.root_hub->serialize);
+	down(&ohci_to_hcd(ohci)->self.root_hub->serialize);
+	status = ohci_hub_resume(ohci_to_hcd(ohci));
+	up(&ohci_to_hcd(ohci)->self.root_hub->serialize);
 #endif
-		if (status == 0)
-			dev->power.power_state = 0;
-		break;
-	}
+	if (status == 0)
+		dev->power.power_state = PMSG_ON;
 	return status;
 }
 
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index 6c3f910bc30..7a890a65f55 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -815,7 +815,7 @@ static int sl811h_urb_enqueue(
 	struct usb_hcd		*hcd,
 	struct usb_host_endpoint *hep,
 	struct urb		*urb,
-	int			mem_flags
+	unsigned		mem_flags
 ) {
 	struct sl811		*sl811 = hcd_to_sl811(hcd);
 	struct usb_device	*udev = urb->dev;
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 269d8ef0145..38aebe361ca 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -20,7 +20,6 @@
 #include <linux/timer.h>
 #include <linux/ioport.h>
 
-#include <pcmcia/version.h>
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
@@ -389,11 +388,6 @@ static dev_link_t *sl811_cs_attach(void)
 	dev_list = link;
 	client_reg.dev_info = (dev_info_t *) &driver_name;
 	client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE;
-	client_reg.EventMask =
-		CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
-		CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
-		CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
-	client_reg.event_handler = &sl811_cs_event;
 	client_reg.Version = 0x0210;
 	client_reg.event_callback_args.client_data = link;
 	ret = pcmcia_register_client(&link->handle, &client_reg);
@@ -418,6 +412,7 @@ static struct pcmcia_driver sl811_cs_driver = {
 		.name	= (char *)driver_name,
 	},
 	.attach		= sl811_cs_attach,
+	.event		= sl811_cs_event,
 	.detach		= sl811_cs_detach,
 	.id_table	= sl811_ids,
 };
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 5f18084a116..bbb36cd6ed6 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -1164,7 +1164,7 @@ static struct urb *uhci_find_urb_ep(struct uhci_hcd *uhci, struct urb *urb)
 
 static int uhci_urb_enqueue(struct usb_hcd *hcd,
 		struct usb_host_endpoint *ep,
-		struct urb *urb, int mem_flags)
+		struct urb *urb, unsigned mem_flags)
 {
 	int ret;
 	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index fd59f6bdd67..298e4a25e3d 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -259,3 +259,16 @@ config USB_ATI_REMOTE
 	  To compile this driver as a module, choose M here: the module will be
 	  called ati_remote.
 
+config USB_KEYSPAN_REMOTE
+	tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
+	depends on USB && INPUT && EXPERIMENTAL
+	---help---
+	  Say Y here if you want to use a Keyspan DMR USB remote control.
+	  Currently only the UIA-11 type of receiver has been tested.  The tag
+	  on the receiver that connects to the USB port should have a P/N that
+	  will tell you what type of DMR you have.  The UIA-10 type is not
+	  supported at this time.  This driver maps all buttons to keypress
+	  events.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called keyspan_remote.
diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile
index 831b2b0f1f0..f1547be632d 100644
--- a/drivers/usb/input/Makefile
+++ b/drivers/usb/input/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_USB_ATI_REMOTE)	+= ati_remote.o
 obj-$(CONFIG_USB_HID)		+= usbhid.o
 obj-$(CONFIG_USB_KBD)		+= usbkbd.o
 obj-$(CONFIG_USB_KBTAB)		+= kbtab.o
+obj-$(CONFIG_USB_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_USB_MOUSE)		+= usbmouse.o
 obj-$(CONFIG_USB_MTOUCH)	+= mtouchusb.o
 obj-$(CONFIG_USB_ITMTOUCH)	+= itmtouch.o
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 100b49bd1d3..2350e7a5ad7 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1428,6 +1428,19 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_DEVICE_ID_VERNIER_SKIP	0x0003
 #define USB_DEVICE_ID_VERNIER_CYCLOPS	0x0004
 
+#define USB_VENDOR_ID_LD		0x0f11
+#define USB_DEVICE_ID_CASSY        	0x1000
+#define USB_DEVICE_ID_POCKETCASSY	0x1010
+#define USB_DEVICE_ID_MOBILECASSY	0x1020
+#define USB_DEVICE_ID_JWM		0x1080
+#define USB_DEVICE_ID_DMMP		0x1081
+#define USB_DEVICE_ID_UMIP		0x1090
+#define USB_DEVICE_ID_VIDEOCOM		0x1200
+#define USB_DEVICE_ID_COM3LAB		0x2000
+#define USB_DEVICE_ID_TELEPORT		0x2010
+#define USB_DEVICE_ID_NETWORKANALYSER	0x2020
+#define USB_DEVICE_ID_POWERCONTROL	0x2030
+
 
 /*
  * Alphabetically sorted blacklist by quirk type.
@@ -1463,6 +1476,17 @@ static struct hid_blacklist {
 	{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_CASSY, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_POCKETCASSY, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_MOBILECASSY, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_JWM, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_DMMP, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_UMIP, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_VIDEOCOM, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_COM3LAB, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_TELEPORT, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_NETWORKANALYSER, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_POWERCONTROL, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_IGNORE },
diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c
new file mode 100644
index 00000000000..67dc9368520
--- /dev/null
+++ b/drivers/usb/input/keyspan_remote.c
@@ -0,0 +1,633 @@
+/*
+ * keyspan_remote: USB driver for the Keyspan DMR
+ *
+ * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ *
+ * This driver has been put together with the support of Innosys, Inc.
+ * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+
+#define DRIVER_VERSION	"v0.1"
+#define DRIVER_AUTHOR	"Michael Downey <downey@zymeta.com>"
+#define DRIVER_DESC	"Driver for the USB Keyspan remote control."
+#define DRIVER_LICENSE	"GPL"
+
+/* Parameters that can be passed to the driver. */
+static int debug;
+module_param(debug, int, 0444);
+MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
+
+/* Vendor and product ids */
+#define USB_KEYSPAN_VENDOR_ID		0x06CD
+#define USB_KEYSPAN_PRODUCT_UIA11	0x0202
+
+/* Defines for converting the data from the remote. */
+#define ZERO		0x18
+#define ZERO_MASK	0x1F	/* 5 bits for a 0 */
+#define ONE		0x3C
+#define ONE_MASK	0x3F	/* 6 bits for a 1 */
+#define SYNC		0x3F80
+#define SYNC_MASK	0x3FFF	/* 14 bits for a SYNC sequence */
+#define STOP		0x00
+#define STOP_MASK	0x1F	/* 5 bits for the STOP sequence */
+#define GAP		0xFF
+
+#define RECV_SIZE	8	/* The UIA-11 type have a 8 byte limit. */
+
+/* table of devices that work with this driver */
+static struct usb_device_id keyspan_table[] = {
+	{ USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) },
+	{ }					/* Terminating entry */
+};
+
+/* Structure to store all the real stuff that a remote sends to us. */
+struct keyspan_message {
+	u16	system;
+	u8	button;
+	u8	toggle;
+};
+
+/* Structure used for all the bit testing magic needed to be done. */
+struct bit_tester {
+	u32	tester;
+	int	len;
+	int	pos;
+	int	bits_left;
+	u8	buffer[32];
+};
+
+/* Structure to hold all of our driver specific stuff */
+struct usb_keyspan {
+	char				name[128];
+	char				phys[64];
+	struct usb_device*		udev;
+	struct input_dev		input;
+	struct usb_interface*		interface;
+	struct usb_endpoint_descriptor* in_endpoint;
+	struct urb*			irq_urb;
+	int				open;
+	dma_addr_t			in_dma;
+	unsigned char*			in_buffer;
+
+	/* variables used to parse messages from remote. */
+	struct bit_tester		data;
+	int				stage;
+	int				toggle;
+};
+
+/*
+ * Table that maps the 31 possible keycodes to input keys.
+ * Currently there are 15 and 17 button models so RESERVED codes
+ * are blank areas in the mapping.
+ */
+static int keyspan_key_table[] = {
+	KEY_RESERVED,		/* 0 is just a place holder. */
+	KEY_RESERVED,
+	KEY_STOP,
+	KEY_PLAYCD,
+	KEY_RESERVED,
+	KEY_PREVIOUSSONG,
+	KEY_REWIND,
+	KEY_FORWARD,
+	KEY_NEXTSONG,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_PAUSE,
+	KEY_VOLUMEUP,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_VOLUMEDOWN,
+	KEY_RESERVED,
+	KEY_UP,
+	KEY_RESERVED,
+	KEY_MUTE,
+	KEY_LEFT,
+	KEY_ENTER,
+	KEY_RIGHT,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_DOWN,
+	KEY_RESERVED,
+	KEY_KPASTERISK,
+	KEY_RESERVED,
+	KEY_MENU
+};
+
+static struct usb_driver keyspan_driver;
+
+/*
+ * Debug routine that prints out what we've received from the remote.
+ */
+static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/
+{
+	char codes[4*RECV_SIZE];
+	int i;
+
+	for (i = 0; i < RECV_SIZE; i++) {
+		snprintf(codes+i*3, 4, "%02x ", dev->in_buffer[i]);
+	}
+
+	dev_info(&dev->udev->dev, "%s\n", codes);
+}
+
+/*
+ * Routine that manages the bit_tester structure.  It makes sure that there are
+ * at least bits_needed bits loaded into the tester.
+ */
+static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)
+{
+	if (dev->data.bits_left >= bits_needed)
+		return(0);
+
+	/*
+	 * Somehow we've missed the last message. The message will be repeated
+	 * though so it's not too big a deal
+	 */
+	if (dev->data.pos >= dev->data.len) {
+		dev_dbg(&dev->udev, "%s - Error ran out of data. pos: %d, len: %d\n",
+			__FUNCTION__, dev->data.pos, dev->data.len);
+		return(-1);
+	}
+
+	/* Load as much as we can into the tester. */
+	while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) &&
+	       (dev->data.pos < dev->data.len)) {
+		dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left);
+		dev->data.bits_left += 8;
+	}
+
+	return(0);
+}
+
+/*
+ * Routine that handles all the logic needed to parse out the message from the remote.
+ */
+static void keyspan_check_data(struct usb_keyspan *remote, struct pt_regs *regs)
+{
+	int i;
+	int found = 0;
+	struct keyspan_message message;
+
+	switch(remote->stage) {
+	case 0:
+		/*
+		 * In stage 0 we want to find the start of a message.  The remote sends a 0xFF as filler.
+		 * So the first byte that isn't a FF should be the start of a new message.
+		 */
+		for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i);
+
+		if (i < RECV_SIZE) {
+			memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE);
+			remote->data.len = RECV_SIZE;
+			remote->data.pos = 0;
+			remote->data.tester = 0;
+			remote->data.bits_left = 0;
+			remote->stage = 1;
+		}
+		break;
+
+	case 1:
+		/*
+		 * Stage 1 we should have 16 bytes and should be able to detect a
+		 * SYNC.  The SYNC is 14 bits, 7 0's and then 7 1's.
+		 */
+		memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
+		remote->data.len += RECV_SIZE;
+
+		found = 0;
+		while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) {
+			for (i = 0; i < 8; ++i) {
+				if (keyspan_load_tester(remote, 14) != 0) {
+					remote->stage = 0;
+					return;
+				}
+
+				if ((remote->data.tester & SYNC_MASK) == SYNC) {
+					remote->data.tester = remote->data.tester >> 14;
+					remote->data.bits_left -= 14;
+					found = 1;
+					break;
+				} else {
+					remote->data.tester = remote->data.tester >> 1;
+					--remote->data.bits_left;
+				}
+			}
+		}
+
+		if (!found) {
+			remote->stage = 0;
+			remote->data.len = 0;
+		} else {
+			remote->stage = 2;
+		}
+		break;
+
+	case 2:
+		/*
+		 * Stage 2 we should have 24 bytes which will be enough for a full
+		 * message.  We need to parse out the system code, button code,
+		 * toggle code, and stop.
+		 */
+		memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
+		remote->data.len += RECV_SIZE;
+
+		message.system = 0;
+		for (i = 0; i < 9; i++) {
+			keyspan_load_tester(remote, 6);
+
+			if ((remote->data.tester & ZERO_MASK) == ZERO) {
+				message.system = message.system << 1;
+				remote->data.tester = remote->data.tester >> 5;
+				remote->data.bits_left -= 5;
+			} else if ((remote->data.tester & ONE_MASK) == ONE) {
+				message.system = (message.system << 1) + 1;
+				remote->data.tester = remote->data.tester >> 6;
+				remote->data.bits_left -= 6;
+			} else {
+				err("%s - Unknown sequence found in system data.\n", __FUNCTION__);
+				remote->stage = 0;
+				return;
+			}
+		}
+
+		message.button = 0;
+		for (i = 0; i < 5; i++) {
+			keyspan_load_tester(remote, 6);
+
+			if ((remote->data.tester & ZERO_MASK) == ZERO) {
+				message.button = message.button << 1;
+				remote->data.tester = remote->data.tester >> 5;
+				remote->data.bits_left -= 5;
+			} else if ((remote->data.tester & ONE_MASK) == ONE) {
+				message.button = (message.button << 1) + 1;
+				remote->data.tester = remote->data.tester >> 6;
+				remote->data.bits_left -= 6;
+			} else {
+				err("%s - Unknown sequence found in button data.\n", __FUNCTION__);
+				remote->stage = 0;
+				return;
+			}
+		}
+
+		keyspan_load_tester(remote, 6);
+		if ((remote->data.tester & ZERO_MASK) == ZERO) {
+			message.toggle = 0;
+			remote->data.tester = remote->data.tester >> 5;
+			remote->data.bits_left -= 5;
+		} else if ((remote->data.tester & ONE_MASK) == ONE) {
+			message.toggle = 1;
+			remote->data.tester = remote->data.tester >> 6;
+			remote->data.bits_left -= 6;
+		} else {
+			err("%s - Error in message, invalid toggle.\n", __FUNCTION__);
+		}
+
+		keyspan_load_tester(remote, 5);
+		if ((remote->data.tester & STOP_MASK) == STOP) {
+			remote->data.tester = remote->data.tester >> 5;
+			remote->data.bits_left -= 5;
+		} else {
+			err("Bad message recieved, no stop bit found.\n");
+		}
+
+		dev_dbg(&remote->udev,
+			"%s found valid message: system: %d, button: %d, toggle: %d\n",
+			__FUNCTION__, message.system, message.button, message.toggle);
+
+		if (message.toggle != remote->toggle) {
+			input_regs(&remote->input, regs);
+			input_report_key(&remote->input, keyspan_key_table[message.button], 1);
+			input_report_key(&remote->input, keyspan_key_table[message.button], 0);
+			input_sync(&remote->input);
+			remote->toggle = message.toggle;
+		}
+
+		remote->stage = 0;
+		break;
+	}
+}
+
+/*
+ * Routine for sending all the initialization messages to the remote.
+ */
+static int keyspan_setup(struct usb_device* dev)
+{
+	int retval = 0;
+
+	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 0x11, 0x40, 0x5601, 0x0, NULL, 0, 0);
+	if (retval) {
+		dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
+			__FUNCTION__, retval);
+		return(retval);
+	}
+
+	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 0x44, 0x40, 0x0, 0x0, NULL, 0, 0);
+	if (retval) {
+		dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
+			__FUNCTION__, retval);
+		return(retval);
+	}
+
+	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+				 0x22, 0x40, 0x0, 0x0, NULL, 0, 0);
+	if (retval) {
+		dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
+			__FUNCTION__, retval);
+		return(retval);
+	}
+
+	dev_dbg(&dev->dev, "%s - Setup complete.\n", __FUNCTION__);
+	return(retval);
+}
+
+/*
+ * Routine used to handle a new message that has come in.
+ */
+static void keyspan_irq_recv(struct urb *urb, struct pt_regs *regs)
+{
+	struct usb_keyspan *dev = urb->context;
+	int retval;
+
+	/* Check our status in case we need to bail out early. */
+	switch (urb->status) {
+	case 0:
+		break;
+
+	/* Device went away so don't keep trying to read from it. */
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+
+	default:
+		goto resubmit;
+		break;
+	}
+
+	if (debug)
+		keyspan_print(dev);
+
+	keyspan_check_data(dev, regs);
+
+resubmit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		err ("%s - usb_submit_urb failed with result: %d", __FUNCTION__, retval);
+}
+
+static int keyspan_open(struct input_dev *dev)
+{
+	struct usb_keyspan *remote = dev->private;
+
+	if (remote->open++)
+		return 0;
+
+	remote->irq_urb->dev = remote->udev;
+	if (usb_submit_urb(remote->irq_urb, GFP_KERNEL)) {
+		remote->open--;
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void keyspan_close(struct input_dev *dev)
+{
+	struct usb_keyspan *remote = dev->private;
+
+	if (!--remote->open)
+		usb_kill_urb(remote->irq_urb);
+}
+
+/*
+ * Routine that sets up the driver to handle a specific USB device detected on the bus.
+ */
+static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id)
+{
+	int i;
+	int retval = -ENOMEM;
+	char path[64];
+	char *buf;
+	struct usb_keyspan *remote = NULL;
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_device *udev = usb_get_dev(interface_to_usbdev(interface));
+
+	/* See if the offered device matches what we can accept */
+	if ((udev->descriptor.idVendor != USB_KEYSPAN_VENDOR_ID) ||
+	    (udev->descriptor.idProduct != USB_KEYSPAN_PRODUCT_UIA11) )
+		return -ENODEV;
+
+	/* allocate memory for our device state and initialize it */
+	remote = kmalloc(sizeof(*remote), GFP_KERNEL);
+	if (remote == NULL) {
+		err("Out of memory\n");
+		goto error;
+	}
+	memset(remote, 0x00, sizeof(*remote));
+
+	remote->udev = udev;
+	remote->interface = interface;
+	remote->toggle = -1;	/* Set to -1 so we will always not match the toggle from the first remote message. */
+
+	/* set up the endpoint information */
+	/* use only the first in interrupt endpoint */
+	iface_desc = interface->cur_altsetting;
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+		endpoint = &iface_desc->endpoint[i].desc;
+
+		if (!remote->in_endpoint &&
+		    (endpoint->bEndpointAddress & USB_DIR_IN) &&
+		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
+			/* we found our interrupt in endpoint */
+			remote->in_endpoint = endpoint;
+
+			remote->in_buffer = usb_buffer_alloc(remote->udev, RECV_SIZE, SLAB_ATOMIC, &remote->in_dma);
+			if (!remote->in_buffer) {
+				retval = -ENOMEM;
+				goto error;
+			}
+		}
+	}
+
+	if (!remote->in_endpoint) {
+		err("Could not find interrupt input endpoint.\n");
+		retval = -ENODEV;
+		goto error;
+	}
+
+	remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!remote->irq_urb) {
+		err("Failed to allocate urb.\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	retval = keyspan_setup(remote->udev);
+	if (retval) {
+		err("Failed to setup device.\n");
+		retval = -ENODEV;
+		goto error;
+	}
+
+	/*
+	 * Setup the input system with the bits we are going to be reporting
+	 */
+	remote->input.evbit[0] = BIT(EV_KEY);		/* We will only report KEY events. */
+	for (i = 0; i < 32; ++i) {
+		if (keyspan_key_table[i] != KEY_RESERVED) {
+			set_bit(keyspan_key_table[i], remote->input.keybit);
+		}
+	}
+
+	remote->input.private = remote;
+	remote->input.open = keyspan_open;
+	remote->input.close = keyspan_close;
+
+	usb_make_path(remote->udev, path, 64);
+	sprintf(remote->phys, "%s/input0", path);
+
+	remote->input.name = remote->name;
+	remote->input.phys = remote->phys;
+	remote->input.id.bustype = BUS_USB;
+	remote->input.id.vendor = le16_to_cpu(remote->udev->descriptor.idVendor);
+	remote->input.id.product = le16_to_cpu(remote->udev->descriptor.idProduct);
+	remote->input.id.version = le16_to_cpu(remote->udev->descriptor.bcdDevice);
+
+	if (!(buf = kmalloc(63, GFP_KERNEL))) {
+		usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
+		kfree(remote);
+		return -ENOMEM;
+	}
+
+	if (remote->udev->descriptor.iManufacturer &&
+	    usb_string(remote->udev, remote->udev->descriptor.iManufacturer, buf, 63) > 0)
+		strcat(remote->name, buf);
+
+	if (remote->udev->descriptor.iProduct &&
+	    usb_string(remote->udev, remote->udev->descriptor.iProduct, buf, 63) > 0)
+		sprintf(remote->name, "%s %s", remote->name, buf);
+
+	if (!strlen(remote->name))
+		sprintf(remote->name, "USB Keyspan Remote %04x:%04x",
+			remote->input.id.vendor, remote->input.id.product);
+
+	kfree(buf);
+
+	/*
+	 * Initialize the URB to access the device. The urb gets sent to the device in keyspan_open()
+	 */
+	usb_fill_int_urb(remote->irq_urb,
+			 remote->udev, usb_rcvintpipe(remote->udev, remote->in_endpoint->bEndpointAddress),
+			 remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote,
+			 remote->in_endpoint->bInterval);
+	remote->irq_urb->transfer_dma = remote->in_dma;
+	remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	/* we can register the device now, as it is ready */
+	input_register_device(&remote->input);
+
+	/* save our data pointer in this interface device */
+	usb_set_intfdata(interface, remote);
+
+	/* let the user know what node this device is now attached to */
+	info("connected: %s on %s", remote->name, path);
+	return 0;
+
+error:
+	/*
+	 * In case of error we need to clean up any allocated buffers
+	 */
+	if (remote->irq_urb)
+		usb_free_urb(remote->irq_urb);
+
+	if (remote->in_buffer)
+		usb_buffer_free(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
+
+	if (remote)
+		kfree(remote);
+
+	return retval;
+}
+
+/*
+ * Routine called when a device is disconnected from the USB.
+ */
+static void keyspan_disconnect(struct usb_interface *interface)
+{
+	struct usb_keyspan *remote;
+
+	/* prevent keyspan_open() from racing keyspan_disconnect() */
+	lock_kernel();
+
+	remote = usb_get_intfdata(interface);
+	usb_set_intfdata(interface, NULL);
+
+	if (remote) {	/* We have a valid driver structure so clean up everything we allocated. */
+		input_unregister_device(&remote->input);
+		usb_kill_urb(remote->irq_urb);
+		usb_free_urb(remote->irq_urb);
+		usb_buffer_free(interface_to_usbdev(interface), RECV_SIZE, remote->in_buffer, remote->in_dma);
+		kfree(remote);
+	}
+
+	unlock_kernel();
+
+	info("USB Keyspan now disconnected");
+}
+
+/*
+ * Standard driver set up sections
+ */
+static struct usb_driver keyspan_driver =
+{
+	.owner =	THIS_MODULE,
+	.name =		"keyspan_remote",
+	.probe =	keyspan_probe,
+	.disconnect =	keyspan_disconnect,
+	.id_table =	keyspan_table
+};
+
+static int __init usb_keyspan_init(void)
+{
+	int result;
+
+	/* register this driver with the USB subsystem */
+	result = usb_register(&keyspan_driver);
+	if (result)
+		err("usb_register failed. Error number %d\n", result);
+
+	return result;
+}
+
+static void __exit usb_keyspan_exit(void)
+{
+	/* deregister this driver with the USB subsystem */
+	usb_deregister(&keyspan_driver);
+}
+
+module_init(usb_keyspan_init);
+module_exit(usb_keyspan_exit);
+
+MODULE_DEVICE_TABLE(usb, keyspan_table);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
diff --git a/drivers/usb/media/Makefile b/drivers/usb/media/Makefile
index 2b76df7005f..d83adffa925 100644
--- a/drivers/usb/media/Makefile
+++ b/drivers/usb/media/Makefile
@@ -2,7 +2,7 @@
 # Makefile for USB Media drivers
 #
 
-sn9c102-objs	:= sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o sn9c102_pas106b.o sn9c102_pas202bcb.o sn9c102_tas5110c1b.o sn9c102_tas5130d1b.o
+sn9c102-objs	:= sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o sn9c102_ov7630.o sn9c102_pas106b.o sn9c102_pas202bcb.o sn9c102_tas5110c1b.o sn9c102_tas5130d1b.o
 
 obj-$(CONFIG_USB_DABUSB)	+= dabusb.o
 obj-$(CONFIG_USB_DSBR)		+= dsbr100.o
diff --git a/drivers/usb/media/sn9c102.h b/drivers/usb/media/sn9c102.h
index 8b8a4c8743f..e5cea0e2eb5 100644
--- a/drivers/usb/media/sn9c102.h
+++ b/drivers/usb/media/sn9c102.h
@@ -56,7 +56,7 @@
 #define SN9C102_MODULE_AUTHOR   "(C) 2004-2005 Luca Risolia"
 #define SN9C102_AUTHOR_EMAIL    "<luca.risolia@studio.unibo.it>"
 #define SN9C102_MODULE_LICENSE  "GPL"
-#define SN9C102_MODULE_VERSION  "1:1.24"
+#define SN9C102_MODULE_VERSION  "1:1.24a"
 #define SN9C102_MODULE_VERSION_CODE  KERNEL_VERSION(1, 0, 24)
 
 enum sn9c102_bridge {
diff --git a/drivers/usb/media/sn9c102_core.c b/drivers/usb/media/sn9c102_core.c
index 31d57400d5b..cf8cfbabefd 100644
--- a/drivers/usb/media/sn9c102_core.c
+++ b/drivers/usb/media/sn9c102_core.c
@@ -429,7 +429,7 @@ sn9c102_i2c_try_read(struct sn9c102_device* cam,
 }
 
 
-static int 
+int
 sn9c102_i2c_try_write(struct sn9c102_device* cam,
                       struct sn9c102_sensor* sensor, u8 address, u8 value)
 {
diff --git a/drivers/usb/media/sn9c102_ov7630.c b/drivers/usb/media/sn9c102_ov7630.c
new file mode 100644
index 00000000000..d27c5aedeaf
--- /dev/null
+++ b/drivers/usb/media/sn9c102_ov7630.c
@@ -0,0 +1,394 @@
+/***************************************************************************
+ * Plug-in for OV7630 image sensor connected to the SN9C10x PC Camera      *
+ * Controllers                                                             *
+ *                                                                         *
+ * Copyright (C) 2005 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include "sn9c102_sensor.h"
+
+
+static struct sn9c102_sensor ov7630;
+
+
+static int ov7630_init(struct sn9c102_device* cam)
+{
+	int err = 0;
+
+	err += sn9c102_write_reg(cam, 0x00, 0x14);
+	err += sn9c102_write_reg(cam, 0x60, 0x17);
+	err += sn9c102_write_reg(cam, 0x0f, 0x18);
+	err += sn9c102_write_reg(cam, 0x50, 0x19);
+
+	err += sn9c102_i2c_write(cam, 0x12, 0x8d);
+	err += sn9c102_i2c_write(cam, 0x11, 0x00);
+	err += sn9c102_i2c_write(cam, 0x15, 0x34);
+	err += sn9c102_i2c_write(cam, 0x16, 0x03);
+	err += sn9c102_i2c_write(cam, 0x17, 0x1c);
+	err += sn9c102_i2c_write(cam, 0x18, 0xbd);
+	err += sn9c102_i2c_write(cam, 0x19, 0x06);
+	err += sn9c102_i2c_write(cam, 0x1a, 0xf6);
+	err += sn9c102_i2c_write(cam, 0x1b, 0x04);
+	err += sn9c102_i2c_write(cam, 0x20, 0x44);
+	err += sn9c102_i2c_write(cam, 0x23, 0xee);
+	err += sn9c102_i2c_write(cam, 0x26, 0xa0);
+	err += sn9c102_i2c_write(cam, 0x27, 0x9a);
+	err += sn9c102_i2c_write(cam, 0x28, 0x20);
+	err += sn9c102_i2c_write(cam, 0x29, 0x30);
+	err += sn9c102_i2c_write(cam, 0x2f, 0x3d);
+	err += sn9c102_i2c_write(cam, 0x30, 0x24);
+	err += sn9c102_i2c_write(cam, 0x32, 0x86);
+	err += sn9c102_i2c_write(cam, 0x60, 0xa9);
+	err += sn9c102_i2c_write(cam, 0x61, 0x42);
+	err += sn9c102_i2c_write(cam, 0x65, 0x00);
+	err += sn9c102_i2c_write(cam, 0x69, 0x38);
+	err += sn9c102_i2c_write(cam, 0x6f, 0x88);
+	err += sn9c102_i2c_write(cam, 0x70, 0x0b);
+	err += sn9c102_i2c_write(cam, 0x71, 0x00);
+	err += sn9c102_i2c_write(cam, 0x74, 0x21);
+	err += sn9c102_i2c_write(cam, 0x7d, 0xf7);
+
+	return err;
+}
+
+
+static int ov7630_set_ctrl(struct sn9c102_device* cam,
+                           const struct v4l2_control* ctrl)
+{
+	int err = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		err += sn9c102_i2c_write(cam, 0x10, ctrl->value >> 2);
+		err += sn9c102_i2c_write(cam, 0x76, ctrl->value & 0x03);
+		break;
+	case V4L2_CID_RED_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x02, ctrl->value);
+		break;
+	case V4L2_CID_BLUE_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x03, ctrl->value);
+		break;
+	case V4L2_CID_GAIN:
+		err += sn9c102_i2c_write(cam, 0x00, ctrl->value);
+		break;
+	case V4L2_CID_CONTRAST:
+		err += ctrl->value ? sn9c102_i2c_write(cam, 0x05,
+		                                       (ctrl->value-1) | 0x20)
+		                   : sn9c102_i2c_write(cam, 0x05, 0x00);
+		break;
+	case V4L2_CID_BRIGHTNESS:
+		err += sn9c102_i2c_write(cam, 0x06, ctrl->value);
+		break;
+	case V4L2_CID_SATURATION:
+		err += sn9c102_i2c_write(cam, 0x03, ctrl->value << 4);
+		break;
+	case V4L2_CID_HUE:
+		err += ctrl->value ? sn9c102_i2c_write(cam, 0x04,
+		                                       (ctrl->value-1) | 0x20)
+		                   : sn9c102_i2c_write(cam, 0x04, 0x00);
+		break;
+	case V4L2_CID_DO_WHITE_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x0c, ctrl->value);
+		break;
+	case V4L2_CID_WHITENESS:
+		err += sn9c102_i2c_write(cam, 0x0d, ctrl->value);
+		break;
+	case V4L2_CID_AUTO_WHITE_BALANCE:
+		err += sn9c102_i2c_write(cam, 0x12, (ctrl->value << 2) | 0x09);
+		break;
+	case V4L2_CID_AUTOGAIN:
+		err += sn9c102_i2c_write(cam, 0x13, ctrl->value);
+		break;
+	case V4L2_CID_VFLIP:
+		err += sn9c102_i2c_write(cam, 0x75, 0x0e | (ctrl->value << 7));
+		break;
+	case V4L2_CID_BLACK_LEVEL:
+		err += sn9c102_i2c_write(cam, 0x25, ctrl->value);
+		break;
+	case SN9C102_V4L2_CID_BRIGHT_LEVEL:
+		err += sn9c102_i2c_write(cam, 0x24, ctrl->value);
+		break;
+	case SN9C102_V4L2_CID_GAMMA:
+		err += sn9c102_i2c_write(cam, 0x14, (ctrl->value << 2) | 0x80);
+		break;
+	case SN9C102_V4L2_CID_BAND_FILTER:
+		err += sn9c102_i2c_write(cam, 0x2d, ctrl->value << 2);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return err ? -EIO : 0;
+}
+
+
+static int ov7630_set_crop(struct sn9c102_device* cam,
+                           const struct v4l2_rect* rect)
+{
+	struct sn9c102_sensor* s = &ov7630;
+	int err = 0;
+	u8 v_start = (u8)(rect->top - s->cropcap.bounds.top) + 1;
+
+	err += sn9c102_write_reg(cam, v_start, 0x13);
+
+	return err;
+}
+
+
+static int ov7630_set_pix_format(struct sn9c102_device* cam,
+                                 const struct v4l2_pix_format* pix)
+{
+	int err = 0;
+
+	if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
+		err += sn9c102_write_reg(cam, 0x20, 0x19);
+	else
+		err += sn9c102_write_reg(cam, 0x50, 0x19);
+
+	return err;
+}
+
+
+static struct sn9c102_sensor ov7630 = {
+	.name = "OV7630",
+	.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+	.sysfs_ops = SN9C102_I2C_WRITE,
+	.frequency = SN9C102_I2C_100KHZ,
+	.interface = SN9C102_I2C_2WIRES,
+	.i2c_slave_id = 0x21,
+	.init = &ov7630_init,
+	.qctrl = {
+		{
+			.id = V4L2_CID_GAIN,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "global gain",
+			.minimum = 0x00,
+			.maximum = 0x3f,
+			.step = 0x01,
+			.default_value = 0x14,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_HUE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "hue",
+			.minimum = 0x00,
+			.maximum = 0x1f+1,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_SATURATION,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "saturation",
+			.minimum = 0x00,
+			.maximum = 0x0f,
+			.step = 0x01,
+			.default_value = 0x08,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_CONTRAST,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "contrast",
+			.minimum = 0x00,
+			.maximum = 0x1f+1,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_EXPOSURE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "exposure",
+			.minimum = 0x000,
+			.maximum = 0x3ff,
+			.step = 0x001,
+			.default_value = 0x83<<2,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_RED_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "red balance",
+			.minimum = 0x00,
+			.maximum = 0xff,
+			.step = 0x01,
+			.default_value = 0x3a,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_BLUE_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "blue balance",
+			.minimum = 0x00,
+			.maximum = 0xff,
+			.step = 0x01,
+			.default_value = 0x77,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_BRIGHTNESS,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "brightness",
+			.minimum = 0x00,
+			.maximum = 0xff,
+			.step = 0x01,
+			.default_value = 0xa0,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_DO_WHITE_BALANCE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "white balance background: blue",
+			.minimum = 0x00,
+			.maximum = 0x3f,
+			.step = 0x01,
+			.default_value = 0x20,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_WHITENESS,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "white balance background: red",
+			.minimum = 0x00,
+			.maximum = 0x3f,
+			.step = 0x01,
+			.default_value = 0x20,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_AUTO_WHITE_BALANCE,
+			.type = V4L2_CTRL_TYPE_BOOLEAN,
+			.name = "auto white balance",
+			.minimum = 0x00,
+			.maximum = 0x01,
+			.step = 0x01,
+			.default_value = 0x01,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_AUTOGAIN,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "gain & exposure mode",
+			.minimum = 0x00,
+			.maximum = 0x03,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_VFLIP,
+			.type = V4L2_CTRL_TYPE_BOOLEAN,
+			.name = "vertical flip",
+			.minimum = 0x00,
+			.maximum = 0x01,
+			.step = 0x01,
+			.default_value = 0x01,
+			.flags = 0,
+		},
+		{
+			.id = V4L2_CID_BLACK_LEVEL,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "black pixel ratio",
+			.minimum = 0x01,
+			.maximum = 0x9a,
+			.step = 0x01,
+			.default_value = 0x8a,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_BRIGHT_LEVEL,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "bright pixel ratio",
+			.minimum = 0x01,
+			.maximum = 0x9a,
+			.step = 0x01,
+			.default_value = 0x10,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_BAND_FILTER,
+			.type = V4L2_CTRL_TYPE_BOOLEAN,
+			.name = "band filter",
+			.minimum = 0x00,
+			.maximum = 0x01,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+		{
+			.id = SN9C102_V4L2_CID_GAMMA,
+			.type = V4L2_CTRL_TYPE_BOOLEAN,
+			.name = "rgb gamma",
+			.minimum = 0x00,
+			.maximum = 0x01,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = 0,
+		},
+	},
+	.set_ctrl = &ov7630_set_ctrl,
+	.cropcap = {
+		.bounds = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+		.defrect = {
+			.left = 0,
+			.top = 0,
+			.width = 640,
+			.height = 480,
+		},
+	},
+	.set_crop = &ov7630_set_crop,
+	.pix_format = {
+		.width = 640,
+		.height = 480,
+		.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		.priv = 8,
+	},
+	.set_pix_format = &ov7630_set_pix_format
+};
+
+
+int sn9c102_probe_ov7630(struct sn9c102_device* cam)
+{
+	int err = 0;
+
+	sn9c102_attach_sensor(cam, &ov7630);
+
+	if (le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x608f &&
+	    le16_to_cpu(ov7630.usbdev->descriptor.idProduct) != 0x602c)
+		return -ENODEV;
+
+	err += sn9c102_write_reg(cam, 0x01, 0x01);
+	err += sn9c102_write_reg(cam, 0x00, 0x01);
+	err += sn9c102_write_reg(cam, 0x28, 0x17);
+
+	if (err)
+		return -EIO;
+
+	err += sn9c102_i2c_write(cam, 0x0b, 0);
+	if (err)
+		return -ENODEV;
+
+	return 0;
+}
diff --git a/drivers/usb/media/sn9c102_sensor.h b/drivers/usb/media/sn9c102_sensor.h
index 6a7adebcb4b..a45166c3488 100644
--- a/drivers/usb/media/sn9c102_sensor.h
+++ b/drivers/usb/media/sn9c102_sensor.h
@@ -64,6 +64,7 @@ struct sn9c102_sensor;
 */
 extern int sn9c102_probe_hv7131d(struct sn9c102_device* cam);
 extern int sn9c102_probe_mi0343(struct sn9c102_device* cam);
+extern int sn9c102_probe_ov7630(struct sn9c102_device* cam);
 extern int sn9c102_probe_pas106b(struct sn9c102_device* cam);
 extern int sn9c102_probe_pas202bcb(struct sn9c102_device* cam);
 extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam);
@@ -80,6 +81,7 @@ static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = {              \
 	&sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */    \
 	&sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */  \
 	&sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */    \
+	&sn9c102_probe_ov7630, /* detection mostly based on USB pid/vid */    \
 	&sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */       \
 	&sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */       \
 	NULL,                                                                 \
@@ -103,7 +105,8 @@ static const struct usb_device_id sn9c102_id_table[] = {                      \
 	{ USB_DEVICE(0x0c45, 0x6029), }, /* PAS106B */                        \
 	{ USB_DEVICE(0x0c45, 0x602a), }, /* HV7131D */                        \
 	{ USB_DEVICE(0x0c45, 0x602b), }, /* MI-0343 */                        \
-	{ USB_DEVICE(0x0c45, 0x602c), }, /* OV7620 */                         \
+	{ USB_DEVICE(0x0c45, 0x602c), }, /* OV7630 */                         \
+	{ USB_DEVICE(0x0c45, 0x602d), },                                      \
 	{ USB_DEVICE(0x0c45, 0x6030), }, /* MI03x */                          \
 	{ USB_DEVICE(0x0c45, 0x6080), },                                      \
 	{ USB_DEVICE(0x0c45, 0x6082), }, /* MI0343 and MI0360 */              \
@@ -145,6 +148,8 @@ static const struct usb_device_id sn9c102_id_table[] = {                      \
 */
 
 /* The "try" I2C I/O versions are used when probing the sensor */
+extern int sn9c102_i2c_try_write(struct sn9c102_device*,struct sn9c102_sensor*,
+                                 u8 address, u8 value);
 extern int sn9c102_i2c_try_read(struct sn9c102_device*,struct sn9c102_sensor*,
                                 u8 address);
 
@@ -201,6 +206,8 @@ enum sn9c102_i2c_interface {
 	SN9C102_I2C_3WIRES,
 };
 
+#define SN9C102_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10
+
 struct sn9c102_sensor {
 	char name[32], /* sensor name */
 	     maintainer[64]; /* name of the mantainer <email> */
@@ -243,7 +250,7 @@ struct sn9c102_sensor {
 	   sensor according to the default configuration structures below.
 	*/
 
-	struct v4l2_queryctrl qctrl[V4L2_CID_LASTP1-V4L2_CID_BASE];
+	struct v4l2_queryctrl qctrl[SN9C102_MAX_CTRLS];
 	/*
 	   Optional list of default controls, defined as indicated in the 
 	   V4L2 API. Menu type controls are not handled by this interface.
@@ -356,7 +363,7 @@ struct sn9c102_sensor {
 	   core module to store successfully updated values of the above
 	   settings, for rollbacks..etc..in case of errors during atomic I/O
 	*/
-	struct v4l2_queryctrl _qctrl[V4L2_CID_LASTP1-V4L2_CID_BASE];
+	struct v4l2_queryctrl _qctrl[SN9C102_MAX_CTRLS];
 	struct v4l2_rect _rect;
 };
 
@@ -367,5 +374,8 @@ struct sn9c102_sensor {
 #define SN9C102_V4L2_CID_GREEN_BALANCE V4L2_CID_PRIVATE_BASE + 1
 #define SN9C102_V4L2_CID_RESET_LEVEL V4L2_CID_PRIVATE_BASE + 2
 #define SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE V4L2_CID_PRIVATE_BASE + 3
+#define SN9C102_V4L2_CID_GAMMA V4L2_CID_PRIVATE_BASE + 4
+#define SN9C102_V4L2_CID_BAND_FILTER V4L2_CID_PRIVATE_BASE + 5
+#define SN9C102_V4L2_CID_BRIGHT_LEVEL V4L2_CID_PRIVATE_BASE + 6
 
 #endif /* _SN9C102_SENSOR_H_ */
diff --git a/drivers/usb/media/sn9c102_tas5110c1b.c b/drivers/usb/media/sn9c102_tas5110c1b.c
index 690d6219227..8775999b5af 100644
--- a/drivers/usb/media/sn9c102_tas5110c1b.c
+++ b/drivers/usb/media/sn9c102_tas5110c1b.c
@@ -24,8 +24,6 @@
 
 static struct sn9c102_sensor tas5110c1b;
 
-static struct v4l2_control tas5110c1b_gain;
-
 
 static int tas5110c1b_init(struct sn9c102_device* cam)
 {
@@ -46,21 +44,6 @@ static int tas5110c1b_init(struct sn9c102_device* cam)
 }
 
 
-static int tas5110c1b_get_ctrl(struct sn9c102_device* cam, 
-                               struct v4l2_control* ctrl)
-{
-	switch (ctrl->id) {
-	case V4L2_CID_GAIN:
-		ctrl->value = tas5110c1b_gain.value;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-
 static int tas5110c1b_set_ctrl(struct sn9c102_device* cam, 
                                const struct v4l2_control* ctrl)
 {
@@ -68,8 +51,7 @@ static int tas5110c1b_set_ctrl(struct sn9c102_device* cam,
 
 	switch (ctrl->id) {
 	case V4L2_CID_GAIN:
-		if (!(err += sn9c102_i2c_write(cam, 0x20, 0xf6 - ctrl->value)))
-			tas5110c1b_gain.value = ctrl->value;
+		err += sn9c102_i2c_write(cam, 0x20, 0xf6 - ctrl->value);
 		break;
 	default:
 		return -EINVAL;
@@ -147,7 +129,6 @@ static struct sn9c102_sensor tas5110c1b = {
 			.height = 288,
 		},
 	},
-	.get_ctrl = &tas5110c1b_get_ctrl,
 	.set_crop = &tas5110c1b_set_crop,
 	.pix_format = {
 		.width = 352,
diff --git a/drivers/usb/media/sn9c102_tas5130d1b.c b/drivers/usb/media/sn9c102_tas5130d1b.c
index b378e941bbe..927eafdd8c7 100644
--- a/drivers/usb/media/sn9c102_tas5130d1b.c
+++ b/drivers/usb/media/sn9c102_tas5130d1b.c
@@ -24,8 +24,6 @@
 
 static struct sn9c102_sensor tas5130d1b;
 
-static struct v4l2_control tas5130d1b_gain, tas5130d1b_exposure;
-
 
 static int tas5130d1b_init(struct sn9c102_device* cam)
 {
@@ -44,24 +42,6 @@ static int tas5130d1b_init(struct sn9c102_device* cam)
 }
 
 
-static int tas5130d1b_get_ctrl(struct sn9c102_device* cam, 
-                               struct v4l2_control* ctrl)
-{
-	switch (ctrl->id) {
-	case V4L2_CID_GAIN:
-		ctrl->value = tas5130d1b_gain.value;
-		break;
-	case V4L2_CID_EXPOSURE:
-		ctrl->value = tas5130d1b_exposure.value;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-
 static int tas5130d1b_set_ctrl(struct sn9c102_device* cam, 
                                const struct v4l2_control* ctrl)
 {
@@ -69,12 +49,10 @@ static int tas5130d1b_set_ctrl(struct sn9c102_device* cam,
 
 	switch (ctrl->id) {
 	case V4L2_CID_GAIN:
-		if (!(err += sn9c102_i2c_write(cam, 0x20, 0xf6 - ctrl->value)))
-			tas5130d1b_gain.value = ctrl->value;
+		err += sn9c102_i2c_write(cam, 0x20, 0xf6 - ctrl->value);
 		break;
 	case V4L2_CID_EXPOSURE:
-		if (!(err += sn9c102_i2c_write(cam, 0x40, 0x47 - ctrl->value)))
-			tas5130d1b_exposure.value = ctrl->value;
+		err += sn9c102_i2c_write(cam, 0x40, 0x47 - ctrl->value);
 		break;
 	default:
 		return -EINVAL;
@@ -147,7 +125,6 @@ static struct sn9c102_sensor tas5130d1b = {
 			.flags = 0,
 		},
 	},
-	.get_ctrl = &tas5130d1b_get_ctrl,
 	.set_ctrl = &tas5130d1b_set_ctrl,
 	.cropcap = {
 		.bounds = {
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 3a896954b3a..6649531fa82 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -139,6 +139,16 @@ config USB_IDMOUSE
 
 source "drivers/usb/misc/sisusbvga/Kconfig"
 
+config USB_LD
+	tristate "USB LD driver"
+	depends on USB && EXPERIMENTAL
+	help
+	  This driver is for generic USB devices that use interrupt transfers,
+	  like LD Didactic's USB devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ldusb.
+
 config USB_TEST
 	tristate "USB testing driver (DEVELOPMENT)"
 	depends on USB && USB_DEVICEFS && EXPERIMENTAL
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 4a3814cbd48..862e40a8368 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_EMI26)		+= emi26.o
 obj-$(CONFIG_USB_EMI62)		+= emi62.o
 obj-$(CONFIG_USB_IDMOUSE)	+= idmouse.o
 obj-$(CONFIG_USB_LCD)		+= usblcd.o
+obj-$(CONFIG_USB_LD)		+= ldusb.o
 obj-$(CONFIG_USB_LED)		+= usbled.o
 obj-$(CONFIG_USB_LEGOTOWER)	+= legousbtower.o
 obj-$(CONFIG_USB_PHIDGETKIT)	+= phidgetkit.o
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
new file mode 100644
index 00000000000..66ec88354b9
--- /dev/null
+++ b/drivers/usb/misc/ldusb.c
@@ -0,0 +1,794 @@
+/**
+ * Generic USB driver for report based interrupt in/out devices
+ * like LD Didactic's USB devices. LD Didactic's USB devices are
+ * HID devices which do not use HID report definitons (they use
+ * raw interrupt in and our reports only for communication).
+ *
+ * This driver uses a ring buffer for time critical reading of
+ * interrupt in reports and provides read and write methods for
+ * raw interrupt reports (similar to the Windows HID driver).
+ * Devices based on the book USB COMPLETE by Jan Axelson may need
+ * such a compatibility to the Windows HID driver.
+ *
+ * Copyright (C) 2005 Michael Hund <mhund@ld-didactic.de>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation; either version 2 of
+ *	the License, or (at your option) any later version.
+ *
+ * Derived from Lego USB Tower driver
+ * Copyright (C) 2003 David Glance <advidgsf@sourceforge.net>
+ *		 2001-2004 Juergen Stuber <starblue@users.sourceforge.net>
+ *
+ * V0.1  (mh) Initial version
+ * V0.11 (mh) Added raw support for HID 1.0 devices (no interrupt out endpoint)
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <asm/uaccess.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/poll.h>
+
+/* Define these values to match your devices */
+#define USB_VENDOR_ID_LD		0x0f11	/* USB Vendor ID of LD Didactic GmbH */
+#define USB_DEVICE_ID_CASSY		0x1000	/* USB Product ID for all CASSY-S modules */
+#define USB_DEVICE_ID_POCKETCASSY	0x1010	/* USB Product ID for Pocket-CASSY */
+#define USB_DEVICE_ID_MOBILECASSY	0x1020	/* USB Product ID for Mobile-CASSY */
+#define USB_DEVICE_ID_JWM		0x1080	/* USB Product ID for Joule and Wattmeter */
+#define USB_DEVICE_ID_DMMP		0x1081	/* USB Product ID for Digital Multimeter P (reserved) */
+#define USB_DEVICE_ID_UMIP		0x1090	/* USB Product ID for UMI P */
+#define USB_DEVICE_ID_VIDEOCOM		0x1200	/* USB Product ID for VideoCom */
+#define USB_DEVICE_ID_COM3LAB		0x2000	/* USB Product ID for COM3LAB */
+#define USB_DEVICE_ID_TELEPORT		0x2010	/* USB Product ID for Terminal Adapter */
+#define USB_DEVICE_ID_NETWORKANALYSER	0x2020	/* USB Product ID for Network Analyser */
+#define USB_DEVICE_ID_POWERCONTROL	0x2030	/* USB Product ID for Controlling device for Power Electronics */
+
+#define USB_VENDOR_ID_VERNIER		0x08f7
+#define USB_DEVICE_ID_VERNIER_LABPRO	0x0001
+#define USB_DEVICE_ID_VERNIER_GOTEMP	0x0002
+#define USB_DEVICE_ID_VERNIER_SKIP	0x0003
+#define USB_DEVICE_ID_VERNIER_CYCLOPS	0x0004
+
+
+#ifdef CONFIG_USB_DYNAMIC_MINORS
+#define USB_LD_MINOR_BASE	0
+#else
+#define USB_LD_MINOR_BASE	176
+#endif
+
+/* table of devices that work with this driver */
+static struct usb_device_id ld_usb_table [] = {
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_CASSY) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_POCKETCASSY) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_MOBILECASSY) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_JWM) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_DMMP) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_UMIP) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_VIDEOCOM) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_COM3LAB) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_TELEPORT) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_NETWORKANALYSER) },
+	{ USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_POWERCONTROL) },
+	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) },
+	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
+	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
+	{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) },
+	{ }					/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, ld_usb_table);
+MODULE_VERSION("V0.11");
+MODULE_AUTHOR("Michael Hund <mhund@ld-didactic.de>");
+MODULE_DESCRIPTION("LD USB Driver");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("LD USB Devices");
+
+#ifdef CONFIG_USB_DEBUG
+	static int debug = 1;
+#else
+	static int debug = 0;
+#endif
+
+/* Use our own dbg macro */
+#define dbg_info(dev, format, arg...) do { if (debug) dev_info(dev , format , ## arg); } while (0)
+
+/* Module parameters */
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
+/* All interrupt in transfers are collected in a ring buffer to
+ * avoid racing conditions and get better performance of the driver.
+ */
+static int ring_buffer_size = 128;
+module_param(ring_buffer_size, int, 0);
+MODULE_PARM_DESC(ring_buffer_size, "Read ring buffer size in reports");
+
+/* The write_buffer can contain more than one interrupt out transfer.
+ */
+static int write_buffer_size = 10;
+module_param(write_buffer_size, int, 0);
+MODULE_PARM_DESC(write_buffer_size, "Write buffer size in reports");
+
+/* As of kernel version 2.6.4 ehci-hcd uses an
+ * "only one interrupt transfer per frame" shortcut
+ * to simplify the scheduling of periodic transfers.
+ * This conflicts with our standard 1ms intervals for in and out URBs.
+ * We use default intervals of 2ms for in and 2ms for out transfers,
+ * which should be fast enough.
+ * Increase the interval to allow more devices that do interrupt transfers,
+ * or set to 1 to use the standard interval from the endpoint descriptors.
+ */
+static int min_interrupt_in_interval = 2;
+module_param(min_interrupt_in_interval, int, 0);
+MODULE_PARM_DESC(min_interrupt_in_interval, "Minimum interrupt in interval in ms");
+
+static int min_interrupt_out_interval = 2;
+module_param(min_interrupt_out_interval, int, 0);
+MODULE_PARM_DESC(min_interrupt_out_interval, "Minimum interrupt out interval in ms");
+
+/* Structure to hold all of our device specific stuff */
+struct ld_usb {
+	struct semaphore	sem;		/* locks this structure */
+	struct usb_interface*	intf;		/* save off the usb interface pointer */
+
+	int			open_count;	/* number of times this port has been opened */
+
+	char*			ring_buffer;
+	unsigned int		ring_head;
+	unsigned int		ring_tail;
+
+	wait_queue_head_t	read_wait;
+	wait_queue_head_t	write_wait;
+
+	char*			interrupt_in_buffer;
+	struct usb_endpoint_descriptor* interrupt_in_endpoint;
+	struct urb*		interrupt_in_urb;
+	int			interrupt_in_interval;
+	size_t			interrupt_in_endpoint_size;
+	int			interrupt_in_running;
+	int			interrupt_in_done;
+
+	char*			interrupt_out_buffer;
+	struct usb_endpoint_descriptor* interrupt_out_endpoint;
+	struct urb*		interrupt_out_urb;
+	int			interrupt_out_interval;
+	size_t			interrupt_out_endpoint_size;
+	int			interrupt_out_busy;
+};
+
+/* prevent races between open() and disconnect() */
+static DECLARE_MUTEX(disconnect_sem);
+
+static struct usb_driver ld_usb_driver;
+
+/**
+ *	ld_usb_abort_transfers
+ *      aborts transfers and frees associated data structures
+ */
+static void ld_usb_abort_transfers(struct ld_usb *dev)
+{
+	/* shutdown transfer */
+	if (dev->interrupt_in_running) {
+		dev->interrupt_in_running = 0;
+		if (dev->intf)
+			usb_kill_urb(dev->interrupt_in_urb);
+	}
+	if (dev->interrupt_out_busy)
+		if (dev->intf)
+			usb_kill_urb(dev->interrupt_out_urb);
+}
+
+/**
+ *	ld_usb_delete
+ */
+static void ld_usb_delete(struct ld_usb *dev)
+{
+	ld_usb_abort_transfers(dev);
+
+	/* free data structures */
+	usb_free_urb(dev->interrupt_in_urb);
+	usb_free_urb(dev->interrupt_out_urb);
+	kfree(dev->ring_buffer);
+	kfree(dev->interrupt_in_buffer);
+	kfree(dev->interrupt_out_buffer);
+	kfree(dev);
+}
+
+/**
+ *	ld_usb_interrupt_in_callback
+ */
+static void ld_usb_interrupt_in_callback(struct urb *urb, struct pt_regs *regs)
+{
+	struct ld_usb *dev = urb->context;
+	size_t *actual_buffer;
+	unsigned int next_ring_head;
+	int retval;
+
+	if (urb->status) {
+		if (urb->status == -ENOENT ||
+		    urb->status == -ECONNRESET ||
+		    urb->status == -ESHUTDOWN) {
+			goto exit;
+		} else {
+			dbg_info(&dev->intf->dev, "%s: nonzero status received: %d\n",
+				 __FUNCTION__, urb->status);
+			goto resubmit; /* maybe we can recover */
+		}
+	}
+
+	if (urb->actual_length > 0) {
+		next_ring_head = (dev->ring_head+1) % ring_buffer_size;
+		if (next_ring_head != dev->ring_tail) {
+			actual_buffer = (size_t*)(dev->ring_buffer + dev->ring_head*(sizeof(size_t)+dev->interrupt_in_endpoint_size));
+			/* actual_buffer gets urb->actual_length + interrupt_in_buffer */
+			*actual_buffer = urb->actual_length;
+			memcpy(actual_buffer+1, dev->interrupt_in_buffer, urb->actual_length);
+			dev->ring_head = next_ring_head;
+			dbg_info(&dev->intf->dev, "%s: received %d bytes\n",
+				 __FUNCTION__, urb->actual_length);
+		} else
+			dev_warn(&dev->intf->dev,
+				 "Ring buffer overflow, %d bytes dropped\n",
+				 urb->actual_length);
+	}
+
+resubmit:
+	/* resubmit if we're still running */
+	if (dev->interrupt_in_running && dev->intf) {
+		retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC);
+		if (retval)
+			dev_err(&dev->intf->dev,
+				"usb_submit_urb failed (%d)\n", retval);
+	}
+
+exit:
+	dev->interrupt_in_done = 1;
+	wake_up_interruptible(&dev->read_wait);
+}
+
+/**
+ *	ld_usb_interrupt_out_callback
+ */
+static void ld_usb_interrupt_out_callback(struct urb *urb, struct pt_regs *regs)
+{
+	struct ld_usb *dev = urb->context;
+
+	/* sync/async unlink faults aren't errors */
+	if (urb->status && !(urb->status == -ENOENT ||
+			     urb->status == -ECONNRESET ||
+			     urb->status == -ESHUTDOWN))
+		dbg_info(&dev->intf->dev,
+			 "%s - nonzero write interrupt status received: %d\n",
+			 __FUNCTION__, urb->status);
+
+	dev->interrupt_out_busy = 0;
+	wake_up_interruptible(&dev->write_wait);
+}
+
+/**
+ *	ld_usb_open
+ */
+static int ld_usb_open(struct inode *inode, struct file *file)
+{
+	struct ld_usb *dev;
+	int subminor;
+	int retval = 0;
+	struct usb_interface *interface;
+
+	nonseekable_open(inode, file);
+	subminor = iminor(inode);
+
+	down(&disconnect_sem);
+
+	interface = usb_find_interface(&ld_usb_driver, subminor);
+
+	if (!interface) {
+		err("%s - error, can't find device for minor %d\n",
+		     __FUNCTION__, subminor);
+		retval = -ENODEV;
+		goto unlock_disconnect_exit;
+	}
+
+	dev = usb_get_intfdata(interface);
+
+	if (!dev) {
+		retval = -ENODEV;
+		goto unlock_disconnect_exit;
+	}
+
+	/* lock this device */
+	if (down_interruptible(&dev->sem)) {
+		retval = -ERESTARTSYS;
+		goto unlock_disconnect_exit;
+	}
+
+	/* allow opening only once */
+	if (dev->open_count) {
+		retval = -EBUSY;
+		goto unlock_exit;
+	}
+	dev->open_count = 1;
+
+	/* initialize in direction */
+	dev->ring_head = 0;
+	dev->ring_tail = 0;
+	usb_fill_int_urb(dev->interrupt_in_urb,
+			 interface_to_usbdev(interface),
+			 usb_rcvintpipe(interface_to_usbdev(interface),
+					dev->interrupt_in_endpoint->bEndpointAddress),
+			 dev->interrupt_in_buffer,
+			 dev->interrupt_in_endpoint_size,
+			 ld_usb_interrupt_in_callback,
+			 dev,
+			 dev->interrupt_in_interval);
+
+	dev->interrupt_in_running = 1;
+	dev->interrupt_in_done = 0;
+
+	retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+	if (retval) {
+		dev_err(&interface->dev, "Couldn't submit interrupt_in_urb %d\n", retval);
+		dev->interrupt_in_running = 0;
+		dev->open_count = 0;
+		goto unlock_exit;
+	}
+
+	/* save device in the file's private structure */
+	file->private_data = dev;
+
+unlock_exit:
+	up(&dev->sem);
+
+unlock_disconnect_exit:
+	up(&disconnect_sem);
+
+	return retval;
+}
+
+/**
+ *	ld_usb_release
+ */
+static int ld_usb_release(struct inode *inode, struct file *file)
+{
+	struct ld_usb *dev;
+	int retval = 0;
+
+	dev = file->private_data;
+
+	if (dev == NULL) {
+		retval = -ENODEV;
+		goto exit;
+	}
+
+	if (down_interruptible(&dev->sem)) {
+		retval = -ERESTARTSYS;
+		goto exit;
+	}
+
+	if (dev->open_count != 1) {
+		retval = -ENODEV;
+		goto unlock_exit;
+	}
+	if (dev->intf == NULL) {
+		/* the device was unplugged before the file was released */
+		up(&dev->sem);
+		/* unlock here as ld_usb_delete frees dev */
+		ld_usb_delete(dev);
+		goto exit;
+	}
+
+	/* wait until write transfer is finished */
+	if (dev->interrupt_out_busy)
+		wait_event_interruptible_timeout(dev->write_wait, !dev->interrupt_out_busy, 2 * HZ);
+	ld_usb_abort_transfers(dev);
+	dev->open_count = 0;
+
+unlock_exit:
+	up(&dev->sem);
+
+exit:
+	return retval;
+}
+
+/**
+ *	ld_usb_poll
+ */
+static unsigned int ld_usb_poll(struct file *file, poll_table *wait)
+{
+	struct ld_usb *dev;
+	unsigned int mask = 0;
+
+	dev = file->private_data;
+
+	poll_wait(file, &dev->read_wait, wait);
+	poll_wait(file, &dev->write_wait, wait);
+
+	if (dev->ring_head != dev->ring_tail)
+		mask |= POLLIN | POLLRDNORM;
+	if (!dev->interrupt_out_busy)
+		mask |= POLLOUT | POLLWRNORM;
+
+	return mask;
+}
+
+/**
+ *	ld_usb_read
+ */
+static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count,
+			   loff_t *ppos)
+{
+	struct ld_usb *dev;
+	size_t *actual_buffer;
+	size_t bytes_to_read;
+	int retval = 0;
+
+	dev = file->private_data;
+
+	/* verify that we actually have some data to read */
+	if (count == 0)
+		goto exit;
+
+	/* lock this object */
+	if (down_interruptible(&dev->sem)) {
+		retval = -ERESTARTSYS;
+		goto exit;
+	}
+
+	/* verify that the device wasn't unplugged */
+	if (dev->intf == NULL) {
+		retval = -ENODEV;
+		err("No device or device unplugged %d\n", retval);
+		goto unlock_exit;
+	}
+
+	/* wait for data */
+	if (dev->ring_head == dev->ring_tail) {
+		if (file->f_flags & O_NONBLOCK) {
+			retval = -EAGAIN;
+			goto unlock_exit;
+		}
+		retval = wait_event_interruptible(dev->read_wait, dev->interrupt_in_done);
+		if (retval < 0)
+			goto unlock_exit;
+	}
+
+	/* actual_buffer contains actual_length + interrupt_in_buffer */
+	actual_buffer = (size_t*)(dev->ring_buffer + dev->ring_tail*(sizeof(size_t)+dev->interrupt_in_endpoint_size));
+	bytes_to_read = min(count, *actual_buffer);
+	if (bytes_to_read < *actual_buffer)
+		dev_warn(&dev->intf->dev, "Read buffer overflow, %d bytes dropped\n",
+			 *actual_buffer-bytes_to_read);
+
+	/* copy one interrupt_in_buffer from ring_buffer into userspace */
+	if (copy_to_user(buffer, actual_buffer+1, bytes_to_read)) {
+		retval = -EFAULT;
+		goto unlock_exit;
+	}
+	dev->ring_tail = (dev->ring_tail+1) % ring_buffer_size;
+
+	retval = bytes_to_read;
+
+unlock_exit:
+	/* unlock the device */
+	up(&dev->sem);
+
+exit:
+	return retval;
+}
+
+/**
+ *	ld_usb_write
+ */
+static ssize_t ld_usb_write(struct file *file, const char __user *buffer,
+			    size_t count, loff_t *ppos)
+{
+	struct ld_usb *dev;
+	size_t bytes_to_write;
+	int retval = 0;
+
+	dev = file->private_data;
+
+	/* verify that we actually have some data to write */
+	if (count == 0)
+		goto exit;
+
+	/* lock this object */
+	if (down_interruptible(&dev->sem)) {
+		retval = -ERESTARTSYS;
+		goto exit;
+	}
+
+	/* verify that the device wasn't unplugged */
+	if (dev->intf == NULL) {
+		retval = -ENODEV;
+		err("No device or device unplugged %d\n", retval);
+		goto unlock_exit;
+	}
+
+	/* wait until previous transfer is finished */
+	if (dev->interrupt_out_busy) {
+		if (file->f_flags & O_NONBLOCK) {
+			retval = -EAGAIN;
+			goto unlock_exit;
+		}
+		retval = wait_event_interruptible(dev->write_wait, !dev->interrupt_out_busy);
+		if (retval < 0) {
+			goto unlock_exit;
+		}
+	}
+
+	/* write the data into interrupt_out_buffer from userspace */
+	bytes_to_write = min(count, write_buffer_size*dev->interrupt_out_endpoint_size);
+	if (bytes_to_write < count)
+		dev_warn(&dev->intf->dev, "Write buffer overflow, %d bytes dropped\n",count-bytes_to_write);
+	dbg_info(&dev->intf->dev, "%s: count = %d, bytes_to_write = %d\n", __FUNCTION__, count, bytes_to_write);
+
+	if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write)) {
+		retval = -EFAULT;
+		goto unlock_exit;
+	}
+
+	if (dev->interrupt_out_endpoint == NULL) {
+		/* try HID_REQ_SET_REPORT=9 on control_endpoint instead of interrupt_out_endpoint */
+		retval = usb_control_msg(interface_to_usbdev(dev->intf),
+					 usb_sndctrlpipe(interface_to_usbdev(dev->intf), 0),
+					 9,
+					 USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
+					 1 << 8, 0,
+					 dev->interrupt_out_buffer,
+					 bytes_to_write,
+					 USB_CTRL_SET_TIMEOUT * HZ);
+		if (retval < 0)
+			err("Couldn't submit HID_REQ_SET_REPORT %d\n", retval);
+		goto unlock_exit;
+	}
+
+	/* send off the urb */
+	usb_fill_int_urb(dev->interrupt_out_urb,
+			 interface_to_usbdev(dev->intf),
+			 usb_sndintpipe(interface_to_usbdev(dev->intf),
+					dev->interrupt_out_endpoint->bEndpointAddress),
+			 dev->interrupt_out_buffer,
+			 bytes_to_write,
+			 ld_usb_interrupt_out_callback,
+			 dev,
+			 dev->interrupt_out_interval);
+
+	dev->interrupt_out_busy = 1;
+	wmb();
+
+	retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL);
+	if (retval) {
+		dev->interrupt_out_busy = 0;
+		err("Couldn't submit interrupt_out_urb %d\n", retval);
+		goto unlock_exit;
+	}
+	retval = bytes_to_write;
+
+unlock_exit:
+	/* unlock the device */
+	up(&dev->sem);
+
+exit:
+	return retval;
+}
+
+/* file operations needed when we register this driver */
+static struct file_operations ld_usb_fops = {
+	.owner =	THIS_MODULE,
+	.read  =	ld_usb_read,
+	.write =	ld_usb_write,
+	.open =		ld_usb_open,
+	.release =	ld_usb_release,
+	.poll =		ld_usb_poll,
+};
+
+/*
+ * usb class driver info in order to get a minor number from the usb core,
+ * and to have the device registered with devfs and the driver core
+ */
+static struct usb_class_driver ld_usb_class = {
+	.name =		"ldusb%d",
+	.fops =		&ld_usb_fops,
+	.minor_base =	USB_LD_MINOR_BASE,
+};
+
+/**
+ *	ld_usb_probe
+ *
+ *	Called by the usb core when a new device is connected that it thinks
+ *	this driver might be interested in.
+ */
+static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct ld_usb *dev = NULL;
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	char *buffer;
+	int i;
+	int retval = -ENOMEM;
+
+	/* allocate memory for our device state and intialize it */
+
+	dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL) {
+		dev_err(&intf->dev, "Out of memory\n");
+		goto exit;
+	}
+	memset(dev, 0x00, sizeof(*dev));
+	init_MUTEX(&dev->sem);
+	dev->intf = intf;
+	init_waitqueue_head(&dev->read_wait);
+	init_waitqueue_head(&dev->write_wait);
+
+	/* workaround for early firmware versions on fast computers */
+	if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VENDOR_ID_LD) &&
+	    ((le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_CASSY) ||
+	     (le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_COM3LAB)) &&
+	    (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x103)) {
+		buffer = kmalloc(256, GFP_KERNEL);
+		/* usb_string makes SETUP+STALL to leave always ControlReadLoop */
+		usb_string(udev, 255, buffer, 256);
+		kfree(buffer);
+	}
+
+	iface_desc = intf->cur_altsetting;
+
+	/* set up the endpoint information */
+	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+		endpoint = &iface_desc->endpoint[i].desc;
+
+		if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) &&
+		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
+			dev->interrupt_in_endpoint = endpoint;
+		}
+
+		if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) &&
+		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
+			dev->interrupt_out_endpoint = endpoint;
+		}
+	}
+	if (dev->interrupt_in_endpoint == NULL) {
+		dev_err(&intf->dev, "Interrupt in endpoint not found\n");
+		goto error;
+	}
+	if (dev->interrupt_out_endpoint == NULL)
+		dev_warn(&intf->dev, "Interrupt out endpoint not found (using control endpoint instead)\n");
+
+	dev->interrupt_in_endpoint_size = le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize);
+	dev->ring_buffer = kmalloc(ring_buffer_size*(sizeof(size_t)+dev->interrupt_in_endpoint_size), GFP_KERNEL);
+	if (!dev->ring_buffer) {
+		dev_err(&intf->dev, "Couldn't allocate ring_buffer\n");
+		goto error;
+	}
+	dev->interrupt_in_buffer = kmalloc(dev->interrupt_in_endpoint_size, GFP_KERNEL);
+	if (!dev->interrupt_in_buffer) {
+		dev_err(&intf->dev, "Couldn't allocate interrupt_in_buffer\n");
+		goto error;
+	}
+	dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->interrupt_in_urb) {
+		dev_err(&intf->dev, "Couldn't allocate interrupt_in_urb\n");
+		goto error;
+	}
+	dev->interrupt_out_endpoint_size = dev->interrupt_out_endpoint ? le16_to_cpu(dev->interrupt_out_endpoint->wMaxPacketSize) :
+									 udev->descriptor.bMaxPacketSize0;
+	dev->interrupt_out_buffer = kmalloc(write_buffer_size*dev->interrupt_out_endpoint_size, GFP_KERNEL);
+	if (!dev->interrupt_out_buffer) {
+		dev_err(&intf->dev, "Couldn't allocate interrupt_out_buffer\n");
+		goto error;
+	}
+	dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->interrupt_out_urb) {
+		dev_err(&intf->dev, "Couldn't allocate interrupt_out_urb\n");
+		goto error;
+	}
+	dev->interrupt_in_interval = min_interrupt_in_interval > dev->interrupt_in_endpoint->bInterval ? min_interrupt_in_interval : dev->interrupt_in_endpoint->bInterval;
+	if (dev->interrupt_out_endpoint)
+		dev->interrupt_out_interval = min_interrupt_out_interval > dev->interrupt_out_endpoint->bInterval ? min_interrupt_out_interval : dev->interrupt_out_endpoint->bInterval;
+
+	/* we can register the device now, as it is ready */
+	usb_set_intfdata(intf, dev);
+
+	retval = usb_register_dev(intf, &ld_usb_class);
+	if (retval) {
+		/* something prevented us from registering this driver */
+		dev_err(&intf->dev, "Not able to get a minor for this device.\n");
+		usb_set_intfdata(intf, NULL);
+		goto error;
+	}
+
+	/* let the user know what node this device is now attached to */
+	dev_info(&intf->dev, "LD USB Device #%d now attached to major %d minor %d\n",
+		(intf->minor - USB_LD_MINOR_BASE), USB_MAJOR, intf->minor);
+
+exit:
+	return retval;
+
+error:
+	ld_usb_delete(dev);
+
+	return retval;
+}
+
+/**
+ *	ld_usb_disconnect
+ *
+ *	Called by the usb core when the device is removed from the system.
+ */
+static void ld_usb_disconnect(struct usb_interface *intf)
+{
+	struct ld_usb *dev;
+	int minor;
+
+	down(&disconnect_sem);
+
+	dev = usb_get_intfdata(intf);
+	usb_set_intfdata(intf, NULL);
+
+	down(&dev->sem);
+
+	minor = intf->minor;
+
+	/* give back our minor */
+	usb_deregister_dev(intf, &ld_usb_class);
+
+	/* if the device is not opened, then we clean up right now */
+	if (!dev->open_count) {
+		up(&dev->sem);
+		ld_usb_delete(dev);
+	} else {
+		dev->intf = NULL;
+		up(&dev->sem);
+	}
+
+	up(&disconnect_sem);
+
+	dev_info(&intf->dev, "LD USB Device #%d now disconnected\n",
+		 (minor - USB_LD_MINOR_BASE));
+}
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver ld_usb_driver = {
+	.owner =	THIS_MODULE,
+	.name =		"ldusb",
+	.probe =	ld_usb_probe,
+	.disconnect =	ld_usb_disconnect,
+	.id_table =	ld_usb_table,
+};
+
+/**
+ *	ld_usb_init
+ */
+static int __init ld_usb_init(void)
+{
+	int retval;
+
+	/* register this driver with the USB subsystem */
+	retval = usb_register(&ld_usb_driver);
+	if (retval)
+		err("usb_register failed for the "__FILE__" driver. Error number %d\n", retval);
+
+	return retval;
+}
+
+/**
+ *	ld_usb_exit
+ */
+static void __exit ld_usb_exit(void)
+{
+	/* deregister this driver with the USB subsystem */
+	usb_deregister(&ld_usb_driver);
+}
+
+module_init(ld_usb_init);
+module_exit(ld_usb_exit);
+
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index 755a4570477..26266b30028 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -19,11 +19,16 @@
 #define DATA_MAX  32
 
 /*
+ * Defined by USB 2.0 clause 9.3, table 9.2.
+ */
+#define SETUP_MAX  8
+
+/*
  * This limit exists to prevent OOMs when the user process stops reading.
  */
 #define EVENT_MAX  25
 
-#define PRINTF_DFL  120
+#define PRINTF_DFL  130
 
 struct mon_event_text {
 	struct list_head e_link;
@@ -33,7 +38,9 @@ struct mon_event_text {
 	unsigned int tstamp;
 	int length;		/* Depends on type: xfer length or act length */
 	int status;
+	char setup_flag;
 	char data_flag;
+	unsigned char setup[SETUP_MAX];
 	unsigned char data[DATA_MAX];
 };
 
@@ -64,6 +71,22 @@ static void mon_text_dtor(void *, kmem_cache_t *, unsigned long);
  * This is called with the whole mon_bus locked, so no additional lock.
  */
 
+static inline char mon_text_get_setup(struct mon_event_text *ep,
+    struct urb *urb, char ev_type)
+{
+
+	if (!usb_pipecontrol(urb->pipe) || ev_type != 'S')
+		return '-';
+
+	if (urb->transfer_flags & URB_NO_SETUP_DMA_MAP)
+		return 'D';
+	if (urb->setup_packet == NULL)
+		return 'Z';	/* '0' would be not as pretty. */
+
+	memcpy(ep->setup, urb->setup_packet, SETUP_MAX);
+	return 0;
+}
+
 static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb,
     int len, char ev_type)
 {
@@ -90,7 +113,6 @@ static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb,
 
 	/*
 	 * Bulk is easy to shortcut reliably. 
-	 * XXX Control needs setup packet taken.
 	 * XXX Other pipe types need consideration. Currently, we overdo it
 	 * and collect garbage for them: better more than less.
 	 */
@@ -144,6 +166,7 @@ static void mon_text_event(struct mon_reader_text *rp, struct urb *urb,
 	/* Collecting status makes debugging sense for submits, too */
 	ep->status = urb->status;
 
+	ep->setup_flag = mon_text_get_setup(ep, urb, ev_type);
 	ep->data_flag = mon_text_get_data(ep, urb, ep->length, ev_type);
 
 	rp->nevents++;
@@ -299,10 +322,25 @@ static ssize_t mon_text_read(struct file *file, char __user *buf,
 	default: /* PIPE_BULK */  utype = 'B';
 	}
 	cnt += snprintf(pbuf + cnt, limit - cnt,
-	    "%lx %u %c %c%c:%03u:%02u %d %d",
+	    "%lx %u %c %c%c:%03u:%02u",
 	    ep->id, ep->tstamp, ep->type,
-	    utype, udir, usb_pipedevice(ep->pipe), usb_pipeendpoint(ep->pipe),
-	    ep->status, ep->length);
+	    utype, udir, usb_pipedevice(ep->pipe), usb_pipeendpoint(ep->pipe));
+
+	if (ep->setup_flag == 0) {   /* Setup packet is present and captured */
+		cnt += snprintf(pbuf + cnt, limit - cnt,
+		    " s %02x %02x %04x %04x %04x",
+		    ep->setup[0],
+		    ep->setup[1],
+		    (ep->setup[3] << 8) | ep->setup[2],
+		    (ep->setup[5] << 8) | ep->setup[4],
+		    (ep->setup[7] << 8) | ep->setup[6]);
+	} else if (ep->setup_flag != '-') { /* Unable to capture setup packet */
+		cnt += snprintf(pbuf + cnt, limit - cnt,
+		    " %c __ __ ____ ____ ____", ep->setup_flag);
+	} else {                     /* No setup for this kind of URB */
+		cnt += snprintf(pbuf + cnt, limit - cnt, " %d", ep->status);
+	}
+	cnt += snprintf(pbuf + cnt, limit - cnt, " %d", ep->length);
 
 	if ((data_len = ep->length) > 0) {
 		if (ep->data_flag == 0) {
diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c
index fd6ff4cb2c6..7ffa99b9760 100644
--- a/drivers/usb/net/kaweth.c
+++ b/drivers/usb/net/kaweth.c
@@ -477,7 +477,7 @@ static int kaweth_reset(struct kaweth_device *kaweth)
 }
 
 static void kaweth_usb_receive(struct urb *, struct pt_regs *regs);
-static int kaweth_resubmit_rx_urb(struct kaweth_device *, int);
+static int kaweth_resubmit_rx_urb(struct kaweth_device *, unsigned);
 
 /****************************************************************
 	int_callback
@@ -550,7 +550,7 @@ static void kaweth_resubmit_tl(void *d)
  *     kaweth_resubmit_rx_urb
  ****************************************************************/
 static int kaweth_resubmit_rx_urb(struct kaweth_device *kaweth,
-						int mem_flags)
+						unsigned mem_flags)
 {
 	int result;
 
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 8a945f4f369..576f3b852fc 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -3227,9 +3227,9 @@ static int usbnet_stop (struct net_device *net)
 	temp = unlink_urbs (dev, &dev->txq) + unlink_urbs (dev, &dev->rxq);
 
 	// maybe wait for deletions to finish.
-	while (skb_queue_len (&dev->rxq)
-			&& skb_queue_len (&dev->txq)
-			&& skb_queue_len (&dev->done)) {
+	while (!skb_queue_empty(&dev->rxq) &&
+	       !skb_queue_empty(&dev->txq) &&
+	       !skb_queue_empty(&dev->done)) {
 		msleep(UNLINK_TIMEOUT_MS);
 		if (netif_msg_ifdown (dev))
 			devdbg (dev, "waited for %d urb completions", temp);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index d882fa3ad19..0b03ddab53d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -264,16 +264,26 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.4.2"
+#define DRIVER_VERSION "v1.4.3"
 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
 #define DRIVER_DESC "USB FTDI Serial Converters Driver"
 
 static int debug;
 
-static struct usb_device_id id_table_sio [] = {
-	{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
-	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
-	{ }						/* Terminating entry */
+/* struct ftdi_sio_quirk is used by devices requiring special attention. */
+struct ftdi_sio_quirk {
+	void (*setup)(struct usb_serial *); /* Special settings during startup. */
+};
+
+static void  ftdi_USB_UIRT_setup	(struct usb_serial *serial);
+static void  ftdi_HE_TIRA1_setup	(struct usb_serial *serial);
+
+static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
+	.setup = ftdi_USB_UIRT_setup,
+};
+
+static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
+	.setup = ftdi_HE_TIRA1_setup,
 };
 
 /*
@@ -288,237 +298,11 @@ static struct usb_device_id id_table_sio [] = {
  * the bcdDevice value is used to differentiate FT232BM and FT245BM from
  * the earlier FT8U232AM and FT8U232BM.  For now, include all known VID/PID
  * combinations in both tables.
- * FIXME: perhaps bcdDevice can also identify 12MHz devices, but I don't know
- * if those ever went into mass production. [Ian Abbott]
+ * FIXME: perhaps bcdDevice can also identify 12MHz FT8U232AM devices,
+ * but I don't know if those ever went into mass production. [Ian Abbott]
  */
 
 
-static struct usb_device_id id_table_8U232AM [] = {
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_IRTRANS_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_ALT_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_RELAIS_PID, 0, 0x3ff) },
-	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
-	{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
-	{ USB_DEVICE_VER(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_632_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_634_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_547_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_633_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_631_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_635_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_640_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_642_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_VNHCPCUSB_D_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_DSS20_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2101_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2102_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2103_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2104_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_1_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_2_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_1_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_2_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_1_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_2_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_1_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_2_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_3_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_4_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_1_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_2_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_3_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_4_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_1_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_2_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_3_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_4_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_1_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_2_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_3_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_4_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_5_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_6_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_7_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_8_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_1_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_2_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_3_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_4_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_5_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_6_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_7_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_8_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_1_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_2_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_3_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_4_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_5_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_6_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_7_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_8_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(IDTECH_VID, IDTECH_IDT1221U_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(OCT_VID, OCT_US101_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_1, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_R2X0, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0, 0x3ff) },
-	{ USB_DEVICE_VER(INTREPID_VID, INTREPID_VALUECAN_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FALCOM_VID, FALCOM_TWIST_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_SUUNTO_SPORTS_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_RM_CANVIEW_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(BANDB_VID, BANDB_USOTL4_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(BANDB_VID, BANDB_USTL4_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(BANDB_VID, BANDB_USO9ML2_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, EVER_ECO_PRO_CDS, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_0_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID, 0, 0x3ff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID, 0, 0x3ff) },
-	{ }						/* Terminating entry */
-};
-
-
-static struct usb_device_id id_table_FT232BM [] = {
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_IRTRANS_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_8U232AM_ALT_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_RELAIS_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_632_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_634_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_547_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_633_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_631_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_635_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_640_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_XF_642_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_VNHCPCUSB_D_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_DSS20_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_0_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_1_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_2_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_3_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_4_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_5_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_6_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_PIEGROUP_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2101_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2102_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2103_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2104_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_1_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2201_2_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_1_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2202_2_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_1_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2203_2_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_1_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_2_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_3_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2401_4_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_1_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_2_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_3_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2402_4_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_1_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_2_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_3_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2403_4_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_1_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_2_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_3_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_4_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_5_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_6_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_7_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2801_8_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_1_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_2_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_3_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_4_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_5_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_6_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_7_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2802_8_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_1_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_2_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_3_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_4_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_5_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_6_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_7_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_8_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(IDTECH_VID, IDTECH_IDT1221U_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(OCT_VID, OCT_US101_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_1, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_R2X0, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E808_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E809_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80A_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80B_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80C_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80D_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80E_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80F_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E888_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E889_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88A_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88B_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88C_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88D_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0x400, 0xffff) },
- 	{ USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) },
- 	{ USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) },
- 	{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) },
- 	{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_1_PID, 0x400, 0xffff) },
- 	{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_2_PID, 0x400, 0xffff) },
-	{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
-	{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
-	{ USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(INTREPID_VID, INTREPID_VALUECAN_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FALCOM_VID, FALCOM_TWIST_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_SUUNTO_SPORTS_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_RM_CANVIEW_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(BANDB_VID, BANDB_USOTL4_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(BANDB_VID, BANDB_USTL4_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(BANDB_VID, BANDB_USO9ML2_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, EVER_ECO_PRO_CDS, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_0_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID, 0x400, 0xffff) },
-	{ }						/* Terminating entry */
-};
-
-
-static struct usb_device_id id_table_USB_UIRT [] = {
-	{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID) },
-	{ }						/* Terminating entry */
-};
-
-
-static struct usb_device_id id_table_HE_TIRA1 [] = {
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_HE_TIRA1_PID, 0x400, 0xffff) },
-	{ }						/* Terminating entry */
-};
-
-
-static struct usb_device_id id_table_FT2232C[] = {
-	{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
-	{ }						/* Terminating entry */
-};
-
 
 static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
@@ -540,14 +324,14 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) },
 	{ USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_0_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_1_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_2_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_3_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_4_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_5_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_MTXORB_6_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID, 0x400, 0xffff) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
@@ -597,35 +381,37 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
 	{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
 	{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_HE_TIRA1_PID, 0x400, 0xffff) },
-	{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
+	{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk },
 	{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
 	{ USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
 	{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },
 	{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E808_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E809_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80A_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80B_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80C_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80D_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80E_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E80F_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E888_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E889_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88A_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88B_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88C_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88D_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
- 	{ USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) },
- 	{ USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) },
- 	{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) },
- 	{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_1_PID, 0x400, 0xffff) },
- 	{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_2_PID, 0x400, 0xffff) },
+ 	{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
+ 	{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
+ 	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
+ 	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) },
+ 	{ USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) },
  	{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
  	{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
 	{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
@@ -642,7 +428,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
 	{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
-	{ USB_DEVICE_VER(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID, 0x400, 0xffff) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
 	{ }						/* Terminating entry */
 };
 
@@ -705,12 +491,8 @@ struct ftdi_private {
  ASYNC_SPD_CUST | ASYNC_SPD_SHI | ASYNC_SPD_WARP )
 
 /* function prototypes for a FTDI serial converter */
-static int  ftdi_SIO_startup		(struct usb_serial *serial);
-static int  ftdi_8U232AM_startup	(struct usb_serial *serial);
-static int  ftdi_FT232BM_startup	(struct usb_serial *serial);
-static int  ftdi_FT2232C_startup	(struct usb_serial *serial);
-static int  ftdi_USB_UIRT_startup	(struct usb_serial *serial);
-static int  ftdi_HE_TIRA1_startup	(struct usb_serial *serial);
+static int  ftdi_sio_probe	(struct usb_serial *serial, const struct usb_device_id *id);
+static int  ftdi_sio_attach		(struct usb_serial *serial);
 static void ftdi_shutdown		(struct usb_serial *serial);
 static int  ftdi_open			(struct usb_serial_port *port, struct file *filp);
 static void ftdi_close			(struct usb_serial_port *port, struct file *filp);
@@ -733,14 +515,16 @@ static unsigned short int ftdi_232am_baud_to_divisor (int baud);
 static __u32 ftdi_232bm_baud_base_to_divisor (int baud, int base);
 static __u32 ftdi_232bm_baud_to_divisor (int baud);
 
-static struct usb_serial_device_type ftdi_SIO_device = {
+static struct usb_serial_device_type ftdi_sio_device = {
 	.owner =		THIS_MODULE,
-	.name =			"FTDI SIO",
-	.id_table =		id_table_sio,
+	.name =			"FTDI USB Serial Device",
+	.short_name =		"ftdi_sio",
+	.id_table =		id_table_combined,
 	.num_interrupt_in =	0,
 	.num_bulk_in =		1,
 	.num_bulk_out =		1,
 	.num_ports =		1,
+	.probe =		ftdi_sio_probe,
 	.open =			ftdi_open,
 	.close =		ftdi_close,
 	.throttle =		ftdi_throttle,
@@ -755,143 +539,10 @@ static struct usb_serial_device_type ftdi_SIO_device = {
 	.ioctl =		ftdi_ioctl,
 	.set_termios =		ftdi_set_termios,
 	.break_ctl =		ftdi_break_ctl,
-	.attach =		ftdi_SIO_startup,
+	.attach =		ftdi_sio_attach,
 	.shutdown =		ftdi_shutdown,
 };
 
-static struct usb_serial_device_type ftdi_8U232AM_device = {
-	.owner =		THIS_MODULE,
-	.name =			"FTDI 8U232AM Compatible",
-	.id_table =		id_table_8U232AM,
-	.num_interrupt_in =	0,
-	.num_bulk_in =		1,
-	.num_bulk_out =		1,
-	.num_ports =		1,
-	.open =			ftdi_open,
-	.close =		ftdi_close,
-	.throttle =		ftdi_throttle,
-	.unthrottle =		ftdi_unthrottle,
-	.write =		ftdi_write,
-	.write_room =		ftdi_write_room,
-	.chars_in_buffer =	ftdi_chars_in_buffer,
-	.read_bulk_callback =	ftdi_read_bulk_callback,
-	.write_bulk_callback =	ftdi_write_bulk_callback,
-	.tiocmget =             ftdi_tiocmget,
-	.tiocmset =             ftdi_tiocmset,
-	.ioctl =		ftdi_ioctl,
-	.set_termios =		ftdi_set_termios,
-	.break_ctl =		ftdi_break_ctl,
-	.attach =		ftdi_8U232AM_startup,
-	.shutdown =		ftdi_shutdown,
-};
-
-static struct usb_serial_device_type ftdi_FT232BM_device = {
-	.owner =		THIS_MODULE,
-	.name =			"FTDI FT232BM Compatible",
-	.id_table =		id_table_FT232BM,
-	.num_interrupt_in =	0,
-	.num_bulk_in =		1,
-	.num_bulk_out =		1,
-	.num_ports =		1,
-	.open =			ftdi_open,
-	.close =		ftdi_close,
-	.throttle =		ftdi_throttle,
-	.unthrottle =		ftdi_unthrottle,
-	.write =		ftdi_write,
-	.write_room =		ftdi_write_room,
-	.chars_in_buffer =	ftdi_chars_in_buffer,
-	.read_bulk_callback =	ftdi_read_bulk_callback,
-	.write_bulk_callback =	ftdi_write_bulk_callback,
-	.tiocmget =             ftdi_tiocmget,
-	.tiocmset =             ftdi_tiocmset,
-	.ioctl =		ftdi_ioctl,
-	.set_termios =		ftdi_set_termios,
-	.break_ctl =		ftdi_break_ctl,
-	.attach =		ftdi_FT232BM_startup,
-	.shutdown =		ftdi_shutdown,
-};
-
-static struct usb_serial_device_type ftdi_FT2232C_device = {
-	.owner =		THIS_MODULE,
-	.name =			"FTDI FT2232C Compatible",
-	.id_table =		id_table_FT2232C,
-	.num_interrupt_in =	0,
-	.num_bulk_in =		1,
-	.num_bulk_out =		1,
-	.num_ports =		1,
-	.open =			ftdi_open,
-	.close =		ftdi_close,
-	.throttle =		ftdi_throttle,
-	.unthrottle =		ftdi_unthrottle,
-	.write =		ftdi_write,
-	.write_room =		ftdi_write_room,
-	.chars_in_buffer =	ftdi_chars_in_buffer,
-	.read_bulk_callback =	ftdi_read_bulk_callback,
-	.write_bulk_callback =	ftdi_write_bulk_callback,
-	.tiocmget =             ftdi_tiocmget,
-	.tiocmset =             ftdi_tiocmset,
-	.ioctl =		ftdi_ioctl,
-	.set_termios =		ftdi_set_termios,
-	.break_ctl =		ftdi_break_ctl,
-	.attach =		ftdi_FT2232C_startup,
-	.shutdown =		ftdi_shutdown,
-};
-
-static struct usb_serial_device_type ftdi_USB_UIRT_device = {
-	.owner =		THIS_MODULE,
-	.name =			"USB-UIRT Infrared Tranceiver",
-	.id_table =		id_table_USB_UIRT,
-	.num_interrupt_in =	0,
-	.num_bulk_in =		1,
-	.num_bulk_out =		1,
-	.num_ports =		1,
-	.open =			ftdi_open,
-	.close =		ftdi_close,
-	.throttle =		ftdi_throttle,
-	.unthrottle =		ftdi_unthrottle,
-	.write =		ftdi_write,
-	.write_room =		ftdi_write_room,
-	.chars_in_buffer =	ftdi_chars_in_buffer,
-	.read_bulk_callback =	ftdi_read_bulk_callback,
-	.write_bulk_callback =	ftdi_write_bulk_callback,
-	.tiocmget =             ftdi_tiocmget,
-	.tiocmset =             ftdi_tiocmset,
-	.ioctl =		ftdi_ioctl,
-	.set_termios =		ftdi_set_termios,
-	.break_ctl =		ftdi_break_ctl,
-	.attach =		ftdi_USB_UIRT_startup,
-	.shutdown =		ftdi_shutdown,
-};
-
-/* The TIRA1 is based on a  FT232BM which requires a fixed baud rate of 100000
- * and which requires RTS-CTS to be enabled. */
-static struct usb_serial_device_type ftdi_HE_TIRA1_device = {
-	.owner =		THIS_MODULE,
-	.name =			"Home-Electronics TIRA-1 IR Transceiver",
-	.id_table =		id_table_HE_TIRA1,
-	.num_interrupt_in =	0,
-	.num_bulk_in =		1,
-	.num_bulk_out =		1,
-	.num_ports =		1,
-	.open =			ftdi_open,
-	.close =		ftdi_close,
-	.throttle =		ftdi_throttle,
-	.unthrottle =		ftdi_unthrottle,
-	.write =		ftdi_write,
-	.write_room =		ftdi_write_room,
-	.chars_in_buffer =	ftdi_chars_in_buffer,
-	.read_bulk_callback =	ftdi_read_bulk_callback,
-	.write_bulk_callback =	ftdi_write_bulk_callback,
-	.tiocmget =             ftdi_tiocmget,
-	.tiocmset =             ftdi_tiocmset,
-	.ioctl =		ftdi_ioctl,
-	.set_termios =		ftdi_set_termios,
-	.break_ctl =		ftdi_break_ctl,
-	.attach =		ftdi_HE_TIRA1_startup,
-	.shutdown =		ftdi_shutdown,
-};
-
-
 
 #define WDR_TIMEOUT 5000 /* default urb timeout */
 
@@ -1212,6 +863,59 @@ check_and_exit:
 } /* set_serial_info */
 
 
+/* Determine type of FTDI chip based on USB config and descriptor. */
+static void ftdi_determine_type(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	struct usb_device *udev = serial->dev;
+	unsigned version;
+	unsigned interfaces;
+
+	/* Assume it is not the original SIO device for now. */
+	priv->baud_base = 48000000 / 16;
+	priv->write_offset = 0;
+
+	version = le16_to_cpu(udev->descriptor.bcdDevice);
+	interfaces = udev->actconfig->desc.bNumInterfaces;
+	dbg("%s: bcdDevice = 0x%x, bNumInterfaces = %u", __FUNCTION__,
+			version, interfaces);
+	if (interfaces > 1) {
+		int inter;
+
+		/* Multiple interfaces.  Assume FT2232C. */
+		priv->chip_type = FT2232C;
+		/* Determine interface code. */
+		inter = serial->interface->altsetting->desc.bInterfaceNumber;
+		if (inter == 0) {
+			priv->interface = PIT_SIOA;
+		} else {
+			priv->interface = PIT_SIOB;
+		}
+		/* BM-type devices have a bug where bcdDevice gets set
+		 * to 0x200 when iSerialNumber is 0.  */
+		if (version < 0x500) {
+			dbg("%s: something fishy - bcdDevice too low for multi-interface device",
+					__FUNCTION__);
+		}
+	} else if (version < 0x200) {
+		/* Old device.  Assume its the original SIO. */
+		priv->chip_type = SIO;
+		priv->baud_base = 12000000 / 16;
+		priv->write_offset = 1;
+	} else if (version < 0x400) {
+		/* Assume its an FT8U232AM (or FT8U245AM) */
+		/* (It might be a BM because of the iSerialNumber bug,
+		 * but it will still work as an AM device.) */
+		priv->chip_type = FT8U232AM;
+	} else {
+		/* Assume its an FT232BM (or FT245BM) */
+		priv->chip_type = FT232BM;
+	}
+	info("Detected %s", ftdi_chip_name[priv->chip_type]);
+}
+
+
 /*
  * ***************************************************************************
  * Sysfs Attribute
@@ -1355,12 +1059,20 @@ static void remove_sysfs_attrs(struct usb_serial *serial)
  * ***************************************************************************
  */
 
-/* Common startup subroutine */
-/* Called from ftdi_SIO_startup, etc. */
-static int ftdi_common_startup (struct usb_serial *serial)
+/* Probe function to check for special devices */
+static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id)
+{
+	usb_set_serial_data(serial, (void *)id->driver_info);
+
+	return (0);
+}
+
+/* attach subroutine */
+static int ftdi_sio_attach (struct usb_serial *serial)
 {
 	struct usb_serial_port *port = serial->port[0];
 	struct ftdi_private *priv;
+	struct ftdi_sio_quirk *quirk;
 	
 	dbg("%s",__FUNCTION__);
 
@@ -1400,150 +1112,49 @@ static int ftdi_common_startup (struct usb_serial *serial)
 	port->bulk_out_buffer = NULL;
 
 	usb_set_serial_port_data(serial->port[0], priv);
-	
-	return (0);
-}
-
-
-/* Startup for the SIO chip */
-/* Called from usbserial:serial_probe */
-static int ftdi_SIO_startup (struct usb_serial *serial)
-{
-	struct ftdi_private *priv;
-	int err;
-
-	dbg("%s",__FUNCTION__);
-
-	err = ftdi_common_startup(serial);
-	if (err){
-		return (err);
-	}
-
-	priv = usb_get_serial_port_data(serial->port[0]);
-	priv->chip_type = SIO;
-	priv->baud_base = 12000000 / 16;
-	priv->write_offset = 1;
-	
-	return (0);
-}
-
-/* Startup for the 8U232AM chip */
-/* Called from usbserial:serial_probe */
-static int ftdi_8U232AM_startup (struct usb_serial *serial)
-{ /* ftdi_8U232AM_startup */
-	struct ftdi_private *priv;
-	int err;
-
-	dbg("%s",__FUNCTION__);
-	err = ftdi_common_startup(serial);
-	if (err){
-		return (err);
-	}
 
-	priv = usb_get_serial_port_data(serial->port[0]);
-	priv->chip_type = FT8U232AM;
-	priv->baud_base = 48000000 / 2; /* Would be / 16, but FTDI supports 0.125, 0.25 and 0.5 divisor fractions! */
-	
+	ftdi_determine_type (serial->port[0]);
 	create_sysfs_attrs(serial);
-	
-	return (0);
-} /* ftdi_8U232AM_startup */
 
-/* Startup for the FT232BM chip */
-/* Called from usbserial:serial_probe */
-static int ftdi_FT232BM_startup (struct usb_serial *serial)
-{ /* ftdi_FT232BM_startup */
-	struct ftdi_private *priv;
-	int err;
-
-	dbg("%s",__FUNCTION__);
-	err = ftdi_common_startup(serial);
-	if (err){
-		return (err);
+	/* Check for device requiring special set up. */
+	quirk = (struct ftdi_sio_quirk *)usb_get_serial_data(serial);
+	if (quirk && quirk->setup) {
+		quirk->setup(serial);
 	}
-
-	priv = usb_get_serial_port_data(serial->port[0]);
-	priv->chip_type = FT232BM;
-	priv->baud_base = 48000000 / 2; /* Would be / 16, but FT232BM supports multiple of 0.125 divisor fractions! */
 	
-	create_sysfs_attrs(serial);
-
 	return (0);
-} /* ftdi_FT232BM_startup */
-
-/* Startup for the FT2232C chip */
-/* Called from usbserial:serial_probe */
-static int ftdi_FT2232C_startup (struct usb_serial *serial)
-{ /* ftdi_FT2232C_startup */
-	struct ftdi_private *priv;
-	int err;
-	int inter;
-
-	dbg("%s",__FUNCTION__);
-	err = ftdi_common_startup(serial);
-	if (err){
-		return (err);
-	}
+} /* ftdi_sio_attach */
 
-	priv = usb_get_serial_port_data(serial->port[0]);
-	priv->chip_type = FT2232C;
-	inter = serial->interface->altsetting->desc.bInterfaceNumber;
 
-	if (inter) {
-		priv->interface = PIT_SIOB;
-	}
-	else  {
-		priv->interface = PIT_SIOA;
-	}
-	priv->baud_base = 48000000 / 2; /* Would be / 16, but FT2232C supports multiple of 0.125 divisor fractions! */
-	
-	create_sysfs_attrs(serial);
-
-	return (0);
-} /* ftdi_FT2232C_startup */
-
-/* Startup for the USB-UIRT device, which requires hardwired baudrate (38400 gets mapped to 312500) */
+/* Setup for the USB-UIRT device, which requires hardwired
+ * baudrate (38400 gets mapped to 312500) */
 /* Called from usbserial:serial_probe */
-static int ftdi_USB_UIRT_startup (struct usb_serial *serial)
-{ /* ftdi_USB_UIRT_startup */
+static void ftdi_USB_UIRT_setup (struct usb_serial *serial)
+{
 	struct ftdi_private *priv;
-	int err;
 
 	dbg("%s",__FUNCTION__);
-	err = ftdi_8U232AM_startup(serial);
-	if (err){
-		return (err);
-	}
 
 	priv = usb_get_serial_port_data(serial->port[0]);
 	priv->flags |= ASYNC_SPD_CUST;
 	priv->custom_divisor = 77;
 	priv->force_baud = B38400;
-	
-	return (0);
-} /* ftdi_USB_UIRT_startup */
+} /* ftdi_USB_UIRT_setup */
 
-/* Startup for the HE-TIRA1 device, which requires hardwired
- * baudrate (38400 gets mapped to 100000) */
-static int ftdi_HE_TIRA1_startup (struct usb_serial *serial)
-{ /* ftdi_HE_TIRA1_startup */
+/* Setup for the HE-TIRA1 device, which requires hardwired
+ * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled.  */
+static void ftdi_HE_TIRA1_setup (struct usb_serial *serial)
+{
 	struct ftdi_private *priv;
-	int err;
 
 	dbg("%s",__FUNCTION__);
-	err = ftdi_FT232BM_startup(serial);
-	if (err){
-		return (err);
-	}
 
 	priv = usb_get_serial_port_data(serial->port[0]);
 	priv->flags |= ASYNC_SPD_CUST;
 	priv->custom_divisor = 240;
 	priv->force_baud = B38400;
 	priv->force_rtscts = 1;
-	
-	return (0);
-} /* ftdi_HE_TIRA1_startup */
+} /* ftdi_HE_TIRA1_setup */
 
 
 /* ftdi_shutdown is called from usbserial:usb_serial_disconnect 
@@ -2367,60 +1978,11 @@ static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigne
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 
-	int  ret, mask;
-	
 	dbg("%s cmd 0x%04x", __FUNCTION__, cmd);
 
 	/* Based on code from acm.c and others */
 	switch (cmd) {
 
-	case TIOCMBIS: /* turns on (Sets) the lines as specified by the mask */
-		dbg("%s TIOCMBIS", __FUNCTION__);
- 	        if (get_user(mask, (unsigned long __user *) arg))
-			return -EFAULT;
-  	        if (mask & TIOCM_DTR){
-			if ((ret = set_dtr(port, HIGH)) < 0) {
-				err("Urb to set DTR failed");
-				return(ret);
-			}
-		}
-		if (mask & TIOCM_RTS) {
-			if ((ret = set_rts(port, HIGH)) < 0){
-				err("Urb to set RTS failed");
-				return(ret);
-			}
-		}
-		return(0);
-		break;
-
-	case TIOCMBIC: /* turns off (Clears) the lines as specified by the mask */
-		dbg("%s TIOCMBIC", __FUNCTION__);
- 	        if (get_user(mask, (unsigned long __user *) arg))
-			return -EFAULT;
-  	        if (mask & TIOCM_DTR){
-			if ((ret = set_dtr(port, LOW)) < 0){
-				err("Urb to unset DTR failed");
-				return(ret);
-			}
-		}	
-		if (mask & TIOCM_RTS) {
-			if ((ret = set_rts(port, LOW)) < 0){
-				err("Urb to unset RTS failed");
-				return(ret);
-			}
-		}
-		return(0);
-		break;
-
-		/*
-		 * I had originally implemented TCSET{A,S}{,F,W} and
-		 * TCGET{A,S} here separately, however when testing I
-		 * found that the higher layers actually do the termios
-		 * conversions themselves and pass the call onto
-		 * ftdi_sio_set_termios. 
-		 *
-		 */
-
 	case TIOCGSERIAL: /* gets serial port data */
 		return get_serial_info(port, (struct serial_struct __user *) arg);
 
@@ -2516,24 +2078,9 @@ static int __init ftdi_init (void)
 	int retval;
 
 	dbg("%s", __FUNCTION__);
-	retval = usb_serial_register(&ftdi_SIO_device);
-	if (retval)
-		goto failed_SIO_register;
-	retval = usb_serial_register(&ftdi_8U232AM_device);
-	if (retval)
-		goto failed_8U232AM_register;
-	retval = usb_serial_register(&ftdi_FT232BM_device);
-	if (retval)
-		goto failed_FT232BM_register;
-	retval = usb_serial_register(&ftdi_FT2232C_device);
-	if (retval)
-		goto failed_FT2232C_register;
-	retval = usb_serial_register(&ftdi_USB_UIRT_device);
-	if (retval)
-		goto failed_USB_UIRT_register;
-	retval = usb_serial_register(&ftdi_HE_TIRA1_device);
+	retval = usb_serial_register(&ftdi_sio_device);
 	if (retval)
-		goto failed_HE_TIRA1_register;
+		goto failed_sio_register;
 	retval = usb_register(&ftdi_driver);
 	if (retval) 
 		goto failed_usb_register;
@@ -2541,18 +2088,8 @@ static int __init ftdi_init (void)
 	info(DRIVER_VERSION ":" DRIVER_DESC);
 	return 0;
 failed_usb_register:
-	usb_serial_deregister(&ftdi_HE_TIRA1_device);
-failed_HE_TIRA1_register:
-	usb_serial_deregister(&ftdi_USB_UIRT_device);
-failed_USB_UIRT_register:
-	usb_serial_deregister(&ftdi_FT2232C_device);
-failed_FT2232C_register:
-	usb_serial_deregister(&ftdi_FT232BM_device);
-failed_FT232BM_register:
-	usb_serial_deregister(&ftdi_8U232AM_device);
-failed_8U232AM_register:
-	usb_serial_deregister(&ftdi_SIO_device);
-failed_SIO_register:
+	usb_serial_deregister(&ftdi_sio_device);
+failed_sio_register:
 	return retval;
 }
 
@@ -2563,12 +2100,7 @@ static void __exit ftdi_exit (void)
 	dbg("%s", __FUNCTION__);
 
 	usb_deregister (&ftdi_driver);
-	usb_serial_deregister (&ftdi_HE_TIRA1_device);
-	usb_serial_deregister (&ftdi_USB_UIRT_device);
-	usb_serial_deregister (&ftdi_FT2232C_device);
-	usb_serial_deregister (&ftdi_FT232BM_device);
-	usb_serial_deregister (&ftdi_8U232AM_device);
-	usb_serial_deregister (&ftdi_SIO_device);
+	usb_serial_deregister (&ftdi_sio_device);
 
 }
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 9fcc7bd1fbe..bd0ab3039bd 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -697,7 +697,7 @@ UNUSUAL_DEV(  0x07af, 0x0004, 0x0100, 0x0133,
 UNUSUAL_DEV(  0x07af, 0x0005, 0x0100, 0x0100, 
 		"Microtech",
 		"USB-SCSI-HD50",
-		US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+		US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ), 
 
 #ifdef CONFIG_USB_STORAGE_DPCM