USB: ftdi_sio: re-implement read processing

- Re-structure read processing.
 - Kill obsolete work queue and always push to tty in completion handler.
 - Use tty_insert_flip_string instead of per character push when
   possible.
 - Fix stalled-read regression in 2.6.31 by using urb status to
   determine when port is closed rather than port count.
 - Fix race with open/close by checking ASYNCB_INITIALIZED in
   unthrottle.
 - Kill private rx_flag and lock and use throttle flags in
   usb_serial_port instead.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 131 insertions, 252 deletions

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 75c84d9b080..9c60d6d4908 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -76,12 +76,7 @@ struct ftdi_private {
 	unsigned long last_dtr_rts;	/* saved modem control outputs */
 	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
 	char prev_status, diff_status;        /* Used for TIOCMIWAIT */
-	__u8 rx_flags;		/* receive state flags (throttling) */
-	spinlock_t rx_lock;	/* spinlock for receive state */
-	struct delayed_work rx_work;
 	struct usb_serial_port *port;
-	int rx_processed;
-
 	__u16 interface;	/* FT2232C, FT2232H or FT4232H port interface
 				   (0 for FT232/245) */
 
@@ -736,10 +731,6 @@ static const char *ftdi_chip_name[] = {
 /* Constants for read urb and write urb */
 #define BUFSZ 512
 
-/* rx_flags */
-#define THROTTLED		0x01
-#define ACTUALLY_THROTTLED	0x02
-
 /* Used for TIOCMIWAIT */
 #define FTDI_STATUS_B0_MASK	(FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
 #define FTDI_STATUS_B1_MASK	(FTDI_RS_BI)
@@ -762,7 +753,7 @@ static int  ftdi_write_room(struct tty_struct *tty);
 static int  ftdi_chars_in_buffer(struct tty_struct *tty);
 static void ftdi_write_bulk_callback(struct urb *urb);
 static void ftdi_read_bulk_callback(struct urb *urb);
-static void ftdi_process_read(struct work_struct *work);
+static void ftdi_process_read(struct usb_serial_port *port);
 static void ftdi_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
 static int  ftdi_tiocmget(struct tty_struct *tty, struct file *file);
@@ -1525,7 +1516,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 	}
 
 	kref_init(&priv->kref);
-	spin_lock_init(&priv->rx_lock);
 	spin_lock_init(&priv->tx_lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
 	/* This will push the characters through immediately rather
@@ -1547,7 +1537,6 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 		port->read_urb->transfer_buffer_length = BUFSZ;
 	}
 
-	INIT_DELAYED_WORK(&priv->rx_work, ftdi_process_read);
 	priv->port = port;
 
 	/* Free port's existing write urb and transfer buffer. */
@@ -1684,6 +1673,26 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 	return 0;
 }
 
+static int ftdi_submit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
+{
+	struct urb *urb = port->read_urb;
+	struct usb_serial *serial = port->serial;
+	int result;
+
+	usb_fill_bulk_urb(urb, serial->dev,
+			   usb_rcvbulkpipe(serial->dev,
+					port->bulk_in_endpointAddress),
+			   urb->transfer_buffer,
+			   urb->transfer_buffer_length,
+			   ftdi_read_bulk_callback, port);
+	result = usb_submit_urb(urb, mem_flags);
+	if (result)
+		dev_err(&port->dev,
+			"%s - failed submitting read urb, error %d\n",
+							__func__, result);
+	return result;
+}
+
 static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 { /* ftdi_open */
 	struct usb_device *dev = port->serial->dev;
@@ -1717,23 +1726,14 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 		ftdi_set_termios(tty, port, tty->termios);
 
 	/* Not throttled */
-	spin_lock_irqsave(&priv->rx_lock, flags);
-	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
+	port->throttled = 0;
+	port->throttle_req = 0;
+	spin_unlock_irqrestore(&port->lock, flags);
 
 	/* Start reading from the device */
-	priv->rx_processed = 0;
-	usb_fill_bulk_urb(port->read_urb, dev,
-			usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
-			port->read_urb->transfer_buffer,
-				port->read_urb->transfer_buffer_length,
-			ftdi_read_bulk_callback, port);
-	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
-	if (result)
-		dev_err(&port->dev,
-			"%s - failed submitting read urb, error %d\n",
-			__func__, result);
-	else
+	result = ftdi_submit_read_urb(port, GFP_KERNEL);
+	if (!result)
 		kref_get(&priv->kref);
 
 	return result;
@@ -1779,10 +1779,6 @@ static void ftdi_close(struct usb_serial_port *port)
 
 	dbg("%s", __func__);
 
-
-	/* cancel any scheduled reading */
-	cancel_delayed_work_sync(&priv->rx_work);
-
 	/* shutdown our bulk read */
 	usb_kill_urb(port->read_urb);
 	kref_put(&priv->kref, ftdi_sio_priv_release);
@@ -2005,236 +2001,121 @@ static int ftdi_chars_in_buffer(struct tty_struct *tty)
 	return buffered;
 }
 
-static void ftdi_read_bulk_callback(struct urb *urb)
+static int ftdi_process_packet(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ftdi_private *priv,
+		char *packet, int len)
 {
-	struct usb_serial_port *port = urb->context;
-	struct ftdi_private *priv;
-	int status = urb->status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (port->port.count <= 0)
-		return;
-
-	if (status) {
-		/* This will happen at close every time so it is a dbg not an
-		   err */
-		dbg("(this is ok on close) nonzero read bulk status received: %d", status);
-		goto out;
-	}
-
-	priv = usb_get_serial_port_data(port);
-	ftdi_process_read(&priv->rx_work.work);
-} /* ftdi_read_bulk_callback */
-
-
-static void ftdi_process_read(struct work_struct *work)
-{ /* ftdi_process_read */
-	struct ftdi_private *priv =
-		container_of(work, struct ftdi_private, rx_work.work);
-	struct usb_serial_port *port = priv->port;
-	struct urb *urb;
-	struct tty_struct *tty;
-	char error_flag;
-	unsigned char *data;
-
 	int i;
-	int result;
-	int need_flip;
-	int packet_offset;
-	unsigned long flags;
+	char status;
+	char flag;
+	char *ch;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (port->port.count <= 0)
-		return;
-
-	tty = tty_port_tty_get(&port->port);
-	if (!tty) {
-		dbg("%s - bad tty pointer - exiting", __func__);
-		return;
+	if (len < 2) {
+		dbg("malformed packet");
+		return 0;
 	}
 
-	priv = usb_get_serial_port_data(port);
-	if (!priv) {
-		dbg("%s - bad port private data pointer - exiting", __func__);
-		goto out;
+	/* Compare new line status to the old one, signal if different/
+	   N.B. packet may be processed more than once, but differences
+	   are only processed once.  */
+	status = packet[0] & FTDI_STATUS_B0_MASK;
+	if (status != priv->prev_status) {
+		priv->diff_status |= status ^ priv->prev_status;
+		wake_up_interruptible(&priv->delta_msr_wait);
+		priv->prev_status = status;
 	}
 
-	urb = port->read_urb;
-	if (!urb) {
-		dbg("%s - bad read_urb pointer - exiting", __func__);
-		goto out;
+	/*
+	 * Although the device uses a bitmask and hence can have multiple
+	 * errors on a packet - the order here sets the priority the error is
+	 * returned to the tty layer.
+	 */
+	flag = TTY_NORMAL;
+	if (packet[1] & FTDI_RS_OE) {
+		flag = TTY_OVERRUN;
+		dbg("OVERRRUN error");
 	}
-
-	data = urb->transfer_buffer;
-
-	if (priv->rx_processed) {
-		dbg("%s - already processed: %d bytes, %d remain", __func__,
-				priv->rx_processed,
-				urb->actual_length - priv->rx_processed);
-	} else {
-		/* The first two bytes of every read packet are status */
-		if (urb->actual_length > 2)
-			usb_serial_debug_data(debug, &port->dev, __func__,
-						urb->actual_length, data);
-		else
-			dbg("Status only: %03oo %03oo", data[0], data[1]);
+	if (packet[1] & FTDI_RS_BI) {
+		flag = TTY_BREAK;
+		dbg("BREAK received");
+		usb_serial_handle_break(port);
+	}
+	if (packet[1] & FTDI_RS_PE) {
+		flag = TTY_PARITY;
+		dbg("PARITY error");
+	}
+	if (packet[1] & FTDI_RS_FE) {
+		flag = TTY_FRAME;
+		dbg("FRAMING error");
 	}
 
-
-	/* TO DO -- check for hung up line and handle appropriately: */
-	/*   send hangup  */
-	/* See acm.c - you do a tty_hangup  - eg tty_hangup(tty) */
-	/* if CD is dropped and the line is not CLOCAL then we should hangup */
-
-	need_flip = 0;
-	for (packet_offset = priv->rx_processed;
-		packet_offset < urb->actual_length; packet_offset += priv->max_packet_size) {
-		int length;
-
-		/* Compare new line status to the old one, signal if different/
-		   N.B. packet may be processed more than once, but differences
-		   are only processed once.  */
-		char new_status = data[packet_offset + 0] &
-						FTDI_STATUS_B0_MASK;
-		if (new_status != priv->prev_status) {
-			priv->diff_status |=
-				new_status ^ priv->prev_status;
-			wake_up_interruptible(&priv->delta_msr_wait);
-			priv->prev_status = new_status;
-		}
-
-		length = min_t(u32, priv->max_packet_size, urb->actual_length-packet_offset)-2;
-		if (length < 0) {
-			dev_err(&port->dev, "%s - bad packet length: %d\n",
-				__func__, length+2);
-			length = 0;
-		}
-
-		if (priv->rx_flags & THROTTLED) {
-			dbg("%s - throttled", __func__);
-			break;
-		}
-		if (tty_buffer_request_room(tty, length) < length) {
-			/* break out & wait for throttling/unthrottling to
-			   happen */
-			dbg("%s - receive room low", __func__);
-			break;
+	len -= 2;
+	if (!len)
+		return 0;	/* status only */
+	ch = packet + 2;
+
+	if (!(port->console && port->sysrq) && flag == TTY_NORMAL)
+		tty_insert_flip_string(tty, ch, len);
+	else {
+		for (i = 0; i < len; i++, ch++) {
+			if (!usb_serial_handle_sysrq_char(tty, port, *ch))
+				tty_insert_flip_char(tty, *ch, flag);
 		}
+	}
+	return len;
+}
 
-		/* Handle errors and break */
-		error_flag = TTY_NORMAL;
-		/* Although the device uses a bitmask and hence can have
-		   multiple errors on a packet - the order here sets the
-		   priority the error is returned to the tty layer  */
+static void ftdi_process_read(struct usb_serial_port *port)
+{
+	struct urb *urb = port->read_urb;
+	struct tty_struct *tty;
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	char *data = (char *)urb->transfer_buffer;
+	int i;
+	int len;
+	int count = 0;
 
-		if (data[packet_offset+1] & FTDI_RS_OE) {
-			error_flag = TTY_OVERRUN;
-			dbg("OVERRRUN error");
-		}
-		if (data[packet_offset+1] & FTDI_RS_BI) {
-			error_flag = TTY_BREAK;
-			dbg("BREAK received");
-			usb_serial_handle_break(port);
-		}
-		if (data[packet_offset+1] & FTDI_RS_PE) {
-			error_flag = TTY_PARITY;
-			dbg("PARITY error");
-		}
-		if (data[packet_offset+1] & FTDI_RS_FE) {
-			error_flag = TTY_FRAME;
-			dbg("FRAMING error");
-		}
-		if (length > 0) {
-			for (i = 2; i < length+2; i++) {
-				/* Note that the error flag is duplicated for
-				   every character received since we don't know
-				   which character it applied to */
-				if (!usb_serial_handle_sysrq_char(tty, port,
-						data[packet_offset + i]))
-					tty_insert_flip_char(tty,
-						data[packet_offset + i],
-						error_flag);
-			}
-			need_flip = 1;
-		}
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
 
-#ifdef NOT_CORRECT_BUT_KEEPING_IT_FOR_NOW
-		/* if a parity error is detected you get status packets forever
-		   until a character is sent without a parity error.
-		   This doesn't work well since the application receives a
-		   never ending stream of bad data - even though new data
-		   hasn't been sent. Therefore I (bill) have taken this out.
-		   However - this might make sense for framing errors and so on
-		   so I am leaving the code in for now.
-		*/
-		else {
-			if (error_flag != TTY_NORMAL) {
-				dbg("error_flag is not normal");
-				/* In this case it is just status - if that is
-				   an error send a bad character */
-				if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-					tty_flip_buffer_push(tty);
-				tty_insert_flip_char(tty, 0xff, error_flag);
-				need_flip = 1;
-			}
-		}
-#endif
-	} /* "for(packet_offset=0..." */
+	for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
+		len = min_t(int, urb->actual_length - i, priv->max_packet_size);
+		count += ftdi_process_packet(tty, port, priv, &data[i], len);
+	}
 
-	/* Low latency */
-	if (need_flip)
+	if (count)
 		tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+}
 
-	if (packet_offset < urb->actual_length) {
-		/* not completely processed - record progress */
-		priv->rx_processed = packet_offset;
-		dbg("%s - incomplete, %d bytes processed, %d remain",
-				__func__, packet_offset,
-				urb->actual_length - packet_offset);
-		/* check if we were throttled while processing */
-		spin_lock_irqsave(&priv->rx_lock, flags);
-		if (priv->rx_flags & THROTTLED) {
-			priv->rx_flags |= ACTUALLY_THROTTLED;
-			spin_unlock_irqrestore(&priv->rx_lock, flags);
-			dbg("%s - deferring remainder until unthrottled",
-					__func__);
-			goto out;
-		}
-		spin_unlock_irqrestore(&priv->rx_lock, flags);
-		/* if the port is closed stop trying to read */
-		if (port->port.count > 0)
-			/* delay processing of remainder */
-			schedule_delayed_work(&priv->rx_work, 1);
-		else
-			dbg("%s - port is closed", __func__);
-		goto out;
-	}
-
-	/* urb is completely processed */
-	priv->rx_processed = 0;
+static void ftdi_read_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned long flags;
 
-	/* if the port is closed stop trying to read */
-	if (port->port.count > 0) {
-		/* Continue trying to always read  */
-		usb_fill_bulk_urb(port->read_urb, port->serial->dev,
-			usb_rcvbulkpipe(port->serial->dev,
-					port->bulk_in_endpointAddress),
-			port->read_urb->transfer_buffer,
-			port->read_urb->transfer_buffer_length,
-			ftdi_read_bulk_callback, port);
+	dbg("%s - port %d", __func__, port->number);
 
-		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-		if (result)
-			dev_err(&port->dev,
-				"%s - failed resubmitting read urb, error %d\n",
-				__func__, result);
+	if (urb->status) {
+		dbg("%s - nonzero read bulk status received: %d",
+						__func__, urb->status);
+		return;
 	}
-out:
-	tty_kref_put(tty);
-} /* ftdi_process_read */
 
+	usb_serial_debug_data(debug, &port->dev, __func__,
+				urb->actual_length, urb->transfer_buffer);
+	ftdi_process_read(port);
+
+	spin_lock_irqsave(&port->lock, flags);
+	port->throttled = port->throttle_req;
+	if (!port->throttled) {
+		spin_unlock_irqrestore(&port->lock, flags);
+		ftdi_submit_read_urb(port, GFP_ATOMIC);
+	} else
+		spin_unlock_irqrestore(&port->lock, flags);
+}
 
 static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 {
@@ -2566,33 +2447,31 @@ static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
 static void ftdi_throttle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->rx_lock, flags);
-	priv->rx_flags |= THROTTLED;
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
+	port->throttle_req = 1;
+	spin_unlock_irqrestore(&port->lock, flags);
 }
 
-
-static void ftdi_unthrottle(struct tty_struct *tty)
+void ftdi_unthrottle(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	int actually_throttled;
+	int was_throttled;
 	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->rx_lock, flags);
-	actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
-	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
-	spin_unlock_irqrestore(&priv->rx_lock, flags);
+	spin_lock_irqsave(&port->lock, flags);
+	was_throttled = port->throttled;
+	port->throttled = port->throttle_req = 0;
+	spin_unlock_irqrestore(&port->lock, flags);
 
-	if (actually_throttled)
-		schedule_delayed_work(&priv->rx_work, 0);
+	/* Resubmit urb if throttled and open. */
+	if (was_throttled && test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+		ftdi_submit_read_urb(port, GFP_KERNEL);
 }
 
 static int __init ftdi_init(void)