diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-11-16 07:47:18 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-11-16 07:47:18 -0800 |
commit | ec0148736f54667641e3e24fa06d47db01d4ba7e (patch) | |
tree | bc3c99a1275e64087f14ce35278f2c522e66c78e /drivers/usb | |
parent | d6ee1a2894c445a0bed1d2dc04e8f13f1f6c0311 (diff) | |
parent | e592c5d0b7db94b485b4a2342db041a1882b7f75 (diff) |
Merge tag 'usb-3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman:
"Here are some USB fixes for the 3.7 tree.
Nothing huge here, just a number of tiny bugfixes resolving issues
that have been found, and two reverts of patches that were found to
have caused problems.
All of these have been in linux-next already.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'usb-3.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "USB/host: Cleanup unneccessary irq disable code"
USB: option: add Alcatel X220/X500D USB IDs
USB: option: add Novatel E362 and Dell Wireless 5800 USB IDs
USB: keyspan: fix typo causing GPF on open
USB: fix build with XEN and EARLY_PRINTK_DBGP enabled but USB_SUPPORT disabled
USB: usb_wwan: fix bulk-urb allocation
usb: otg: Fix build errors if USB_MUSB_OMAP2PLUS is selected as module
usb: musb: ux500: fix 'musbid' undeclared error in ux500_remove()
Revert "usb: musb: use DMA mode 1 whenever possible"
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/core/hcd.c | 16 | ||||
-rw-r--r-- | drivers/usb/early/ehci-dbgp.c | 15 | ||||
-rw-r--r-- | drivers/usb/host/ehci-ls1x.c | 2 | ||||
-rw-r--r-- | drivers/usb/host/ohci-xls.c | 2 | ||||
-rw-r--r-- | drivers/usb/musb/musb_gadget.c | 30 | ||||
-rw-r--r-- | drivers/usb/musb/ux500.c | 2 | ||||
-rw-r--r-- | drivers/usb/otg/Kconfig | 4 | ||||
-rw-r--r-- | drivers/usb/serial/keyspan.c | 3 | ||||
-rw-r--r-- | drivers/usb/serial/option.c | 9 | ||||
-rw-r--r-- | drivers/usb/serial/usb_wwan.c | 10 |
10 files changed, 71 insertions, 22 deletions
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 1e741bca026..f034716190f 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2151,8 +2151,15 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum); irqreturn_t usb_hcd_irq (int irq, void *__hcd) { struct usb_hcd *hcd = __hcd; + unsigned long flags; irqreturn_t rc; + /* IRQF_DISABLED doesn't work correctly with shared IRQs + * when the first handler doesn't use it. So let's just + * assume it's never used. + */ + local_irq_save(flags); + if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) rc = IRQ_NONE; else if (hcd->driver->irq(hcd) == IRQ_NONE) @@ -2160,6 +2167,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) else rc = IRQ_HANDLED; + local_irq_restore(flags); return rc; } EXPORT_SYMBOL_GPL(usb_hcd_irq); @@ -2347,6 +2355,14 @@ static int usb_hcd_request_irqs(struct usb_hcd *hcd, int retval; if (hcd->driver->irq) { + + /* IRQF_DISABLED doesn't work as advertised when used together + * with IRQF_SHARED. As usb_hcd_irq() will always disable + * interrupts we can remove it here. + */ + if (irqflags & IRQF_SHARED) + irqflags &= ~IRQF_DISABLED; + snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", hcd->driver->description, hcd->self.busnum); retval = request_irq(irqnum, &usb_hcd_irq, irqflags, diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index e426ad626d7..4bfa78af379 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -20,6 +20,7 @@ #include <linux/usb/ehci_def.h> #include <linux/delay.h> #include <linux/serial_core.h> +#include <linux/kconfig.h> #include <linux/kgdb.h> #include <linux/kthread.h> #include <asm/io.h> @@ -614,12 +615,6 @@ err: return -ENODEV; } -int dbgp_external_startup(struct usb_hcd *hcd) -{ - return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup(); -} -EXPORT_SYMBOL_GPL(dbgp_external_startup); - static int ehci_reset_port(int port) { u32 portsc; @@ -979,6 +974,7 @@ struct console early_dbgp_console = { .index = -1, }; +#if IS_ENABLED(CONFIG_USB_EHCI_HCD) int dbgp_reset_prep(struct usb_hcd *hcd) { int ret = xen_dbgp_reset_prep(hcd); @@ -1007,6 +1003,13 @@ int dbgp_reset_prep(struct usb_hcd *hcd) } EXPORT_SYMBOL_GPL(dbgp_reset_prep); +int dbgp_external_startup(struct usb_hcd *hcd) +{ + return xen_dbgp_external_startup(hcd) ?: _dbgp_external_startup(); +} +EXPORT_SYMBOL_GPL(dbgp_external_startup); +#endif /* USB_EHCI_HCD */ + #ifdef CONFIG_KGDB static char kgdbdbgp_buf[DBGP_MAX_PACKET]; diff --git a/drivers/usb/host/ehci-ls1x.c b/drivers/usb/host/ehci-ls1x.c index ca759652626..aa0f328922d 100644 --- a/drivers/usb/host/ehci-ls1x.c +++ b/drivers/usb/host/ehci-ls1x.c @@ -113,7 +113,7 @@ static int ehci_hcd_ls1x_probe(struct platform_device *pdev) goto err_put_hcd; } - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (ret) goto err_put_hcd; diff --git a/drivers/usb/host/ohci-xls.c b/drivers/usb/host/ohci-xls.c index 84201cd1a47..41e378f17c6 100644 --- a/drivers/usb/host/ohci-xls.c +++ b/drivers/usb/host/ohci-xls.c @@ -56,7 +56,7 @@ static int ohci_xls_probe_internal(const struct hc_driver *driver, goto err3; } - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + retval = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (retval != 0) goto err4; return retval; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index d0b87e7b4ab..b6b84dacc79 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -707,11 +707,12 @@ static void rxstate(struct musb *musb, struct musb_request *req) fifo_count = musb_readw(epio, MUSB_RXCOUNT); /* - * use mode 1 only if we expect data of at least ep packet_sz - * and have not yet received a short packet + * Enable Mode 1 on RX transfers only when short_not_ok flag + * is set. Currently short_not_ok flag is set only from + * file_storage and f_mass_storage drivers */ - if ((request->length - request->actual >= musb_ep->packet_sz) && - (fifo_count >= musb_ep->packet_sz)) + + if (request->short_not_ok && fifo_count == musb_ep->packet_sz) use_mode_1 = 1; else use_mode_1 = 0; @@ -727,6 +728,27 @@ static void rxstate(struct musb *musb, struct musb_request *req) c = musb->dma_controller; channel = musb_ep->dma; + /* We use DMA Req mode 0 in rx_csr, and DMA controller operates in + * mode 0 only. So we do not get endpoint interrupts due to DMA + * completion. We only get interrupts from DMA controller. + * + * We could operate in DMA mode 1 if we knew the size of the tranfer + * in advance. For mass storage class, request->length = what the host + * sends, so that'd work. But for pretty much everything else, + * request->length is routinely more than what the host sends. For + * most these gadgets, end of is signified either by a short packet, + * or filling the last byte of the buffer. (Sending extra data in + * that last pckate should trigger an overflow fault.) But in mode 1, + * we don't get DMA completion interrupt for short packets. + * + * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1), + * to get endpoint interrupt on every DMA req, but that didn't seem + * to work reliably. + * + * REVISIT an updated g_file_storage can set req->short_not_ok, which + * then becomes usable as a runtime "use mode 1" hint... + */ + /* Experimental: Mode1 works with mass storage use cases */ if (use_mode_1) { csr |= MUSB_RXCSR_AUTOCLEAR; diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index d62a91fedc2..0e62f504410 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -65,7 +65,7 @@ static int __devinit ux500_probe(struct platform_device *pdev) struct platform_device *musb; struct ux500_glue *glue; struct clk *clk; - + int musbid; int ret = -ENOMEM; glue = kzalloc(sizeof(*glue), GFP_KERNEL); diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index d8c8a42bff3..6223062d5d1 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -58,7 +58,7 @@ config USB_ULPI_VIEWPORT config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" - depends on TWL4030_CORE && REGULATOR_TWL4030 + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL4030 @@ -68,7 +68,7 @@ config TWL4030_USB config TWL6030_USB tristate "TWL6030 USB Transceiver Driver" - depends on TWL4030_CORE && OMAP_USB2 + depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL6030 diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 7179b0c5f81..cff8dd5b462 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -2430,7 +2430,7 @@ static void keyspan_release(struct usb_serial *serial) static int keyspan_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; - struct keyspan_port_private *s_priv; + struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; struct callbacks *cback; @@ -2445,7 +2445,6 @@ static int keyspan_port_probe(struct usb_serial_port *port) if (!p_priv) return -ENOMEM; - s_priv = usb_get_serial_data(port->serial); p_priv->device_details = d_details; /* Setup values for the various callback routines */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5dee7d61241..edc64bb6f45 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -158,6 +158,7 @@ static void option_instat_callback(struct urb *urb); #define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED 0x8001 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0x9000 #define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001 +#define NOVATELWIRELESS_PRODUCT_E362 0x9010 #define NOVATELWIRELESS_PRODUCT_G1 0xA001 #define NOVATELWIRELESS_PRODUCT_G1_M 0xA002 #define NOVATELWIRELESS_PRODUCT_G2 0xA010 @@ -193,6 +194,9 @@ static void option_instat_callback(struct urb *urb); #define DELL_PRODUCT_5730_MINICARD_TELUS 0x8181 #define DELL_PRODUCT_5730_MINICARD_VZW 0x8182 +#define DELL_PRODUCT_5800_MINICARD_VZW 0x8195 /* Novatel E362 */ +#define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */ + #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da #define KYOCERA_PRODUCT_KPC680 0x180a @@ -283,6 +287,7 @@ static void option_instat_callback(struct urb *urb); /* ALCATEL PRODUCTS */ #define ALCATEL_VENDOR_ID 0x1bbb #define ALCATEL_PRODUCT_X060S_X200 0x0000 +#define ALCATEL_PRODUCT_X220_X500D 0x0017 #define PIRELLI_VENDOR_ID 0x1266 #define PIRELLI_PRODUCT_C100_1 0x1002 @@ -706,6 +711,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) }, /* Novatel Ovation MC551 a.k.a. Verizon USB551L */ { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, @@ -728,6 +734,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ + { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, @@ -1157,6 +1165,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200), .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D) }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 61a73ad1a18..a3e9c095f0d 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -455,9 +455,6 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, struct usb_serial *serial = port->serial; struct urb *urb; - if (endpoint == -1) - return NULL; /* endpoint not needed */ - urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ if (urb == NULL) { dev_dbg(&serial->interface->dev, @@ -489,6 +486,9 @@ int usb_wwan_port_probe(struct usb_serial_port *port) init_usb_anchor(&portdata->delayed); for (i = 0; i < N_IN_URB; i++) { + if (!port->bulk_in_size) + break; + buffer = (u8 *)__get_free_page(GFP_KERNEL); if (!buffer) goto bail_out_error; @@ -502,8 +502,8 @@ int usb_wwan_port_probe(struct usb_serial_port *port) } for (i = 0; i < N_OUT_URB; i++) { - if (port->bulk_out_endpointAddress == -1) - continue; + if (!port->bulk_out_size) + break; buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); if (!buffer) |