Merge tag 'usb-serial-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next

Johan writes:

USB-serial updates for v3.20-rc1

Removal of dead code in mos7840 and a clean-up of the option blacklist
handling.

Signed-off-by: Johan Hovold <johan@kernel.org>

2 files changed, 14 insertions, 106 deletions

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 220b4be8964..e4473a9109c 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1309,35 +1309,6 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	const unsigned char *current_position = data;
 	unsigned char *data1;
 
-#ifdef NOTMOS7840
-	Data = 0x00;
-	status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
-	mos7840_port->shadowLCR = Data;
-	dev_dbg(&port->dev, "%s: LINE_CONTROL_REGISTER is %x\n", __func__, Data);
-	dev_dbg(&port->dev, "%s: mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR);
-
-	/* Data = 0x03; */
-	/* status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); */
-	/* mos7840_port->shadowLCR=Data;//Need to add later */
-
-	Data |= SERIAL_LCR_DLAB;	/* data latch enable in LCR 0x80 */
-	status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-	/* Data = 0x0c; */
-	/* status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); */
-	Data = 0x00;
-	status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data);
-	dev_dbg(&port->dev, "%s: DLL value is %x\n", __func__, Data);
-
-	Data = 0x0;
-	status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data);
-	dev_dbg(&port->dev, "%s: DLM value is %x\n", __func__, Data);
-
-	Data = Data & ~SERIAL_LCR_DLAB;
-	dev_dbg(&port->dev, "%s: mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR);
-	status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-#endif
-
 	if (mos7840_port_paranoia_check(port, __func__))
 		return -1;
 
@@ -1614,37 +1585,6 @@ static int mos7840_calc_baud_rate_divisor(struct usb_serial_port *port,
 		*clk_sel_val = 0x70;
 	}
 	return 0;
-
-#ifdef NOTMCS7840
-
-	for (i = 0; i < ARRAY_SIZE(mos7840_divisor_table); i++) {
-		if (mos7840_divisor_table[i].BaudRate == baudrate) {
-			*divisor = mos7840_divisor_table[i].Divisor;
-			return 0;
-		}
-	}
-
-	/* After trying for all the standard baud rates    *
-	 * Try calculating the divisor for this baud rate  */
-
-	if (baudrate > 75 && baudrate < 230400) {
-		/* get the divisor */
-		custom = (__u16) (230400L / baudrate);
-
-		/* Check for round off */
-		round1 = (__u16) (2304000L / baudrate);
-		round = (__u16) (round1 - (custom * 10));
-		if (round > 4)
-			custom++;
-		*divisor = custom;
-
-		dev_dbg(&port->dev, " Baud %d = %d\n", baudrate, custom);
-		return 0;
-	}
-
-	dev_dbg(&port->dev, "%s", " Baud calculation Failed...\n");
-	return -1;
-#endif
 }
 
 /*****************************************************************************
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index efdcee15b52..f0c0c53359a 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -507,18 +507,10 @@ static void option_instat_callback(struct urb *urb);
 #define VIATELECOM_VENDOR_ID			0x15eb
 #define VIATELECOM_PRODUCT_CDS7			0x0001
 
-/* some devices interfaces need special handling due to a number of reasons */
-enum option_blacklist_reason {
-		OPTION_BLACKLIST_NONE = 0,
-		OPTION_BLACKLIST_SENDSETUP = 1,
-		OPTION_BLACKLIST_RESERVED_IF = 2
-};
-
-#define MAX_BL_NUM  11
 struct option_blacklist_info {
-	/* bitfield of interface numbers for OPTION_BLACKLIST_SENDSETUP */
+	/* bitmask of interface numbers blacklisted for send_setup */
 	const unsigned long sendsetup;
-	/* bitfield of interface numbers for OPTION_BLACKLIST_RESERVED_IF */
+	/* bitmask of interface numbers that are reserved */
 	const unsigned long reserved;
 };
 
@@ -1822,36 +1814,13 @@ struct option_private {
 
 module_usb_serial_driver(serial_drivers, option_ids);
 
-static bool is_blacklisted(const u8 ifnum, enum option_blacklist_reason reason,
-			   const struct option_blacklist_info *blacklist)
-{
-	unsigned long num;
-	const unsigned long *intf_list;
-
-	if (blacklist) {
-		if (reason == OPTION_BLACKLIST_SENDSETUP)
-			intf_list = &blacklist->sendsetup;
-		else if (reason == OPTION_BLACKLIST_RESERVED_IF)
-			intf_list = &blacklist->reserved;
-		else {
-			BUG_ON(reason);
-			return false;
-		}
-
-		for_each_set_bit(num, intf_list, MAX_BL_NUM + 1) {
-			if (num == ifnum)
-				return true;
-		}
-	}
-	return false;
-}
-
 static int option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id)
 {
 	struct usb_interface_descriptor *iface_desc =
 				&serial->interface->cur_altsetting->desc;
 	struct usb_device_descriptor *dev_desc = &serial->dev->descriptor;
+	const struct option_blacklist_info *blacklist;
 
 	/* Never bind to the CD-Rom emulation interface	*/
 	if (iface_desc->bInterfaceClass == 0x08)
@@ -1862,10 +1831,9 @@ static int option_probe(struct usb_serial *serial,
 	 * the same class/subclass/protocol as the serial interfaces.  Look at
 	 * the Windows driver .INF files for reserved interface numbers.
 	 */
-	if (is_blacklisted(
-		iface_desc->bInterfaceNumber,
-		OPTION_BLACKLIST_RESERVED_IF,
-		(const struct option_blacklist_info *) id->driver_info))
+	blacklist = (void *)id->driver_info;
+	if (blacklist && test_bit(iface_desc->bInterfaceNumber,
+						&blacklist->reserved))
 		return -ENODEV;
 	/*
 	 * Don't bind network interface on Samsung GT-B3730, it is handled by
@@ -1876,8 +1844,8 @@ static int option_probe(struct usb_serial *serial,
 	    iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA)
 		return -ENODEV;
 
-	/* Store device id so we can use it during attach. */
-	usb_set_serial_data(serial, (void *)id);
+	/* Store the blacklist info so we can use it during attach. */
+	usb_set_serial_data(serial, (void *)blacklist);
 
 	return 0;
 }
@@ -1885,7 +1853,7 @@ static int option_probe(struct usb_serial *serial,
 static int option_attach(struct usb_serial *serial)
 {
 	struct usb_interface_descriptor *iface_desc;
-	const struct usb_device_id *id;
+	const struct option_blacklist_info *blacklist;
 	struct usb_wwan_intf_private *data;
 	struct option_private *priv;
 
@@ -1899,16 +1867,16 @@ static int option_attach(struct usb_serial *serial)
 		return -ENOMEM;
 	}
 
-	/* Retrieve device id stored at probe. */
-	id = usb_get_serial_data(serial);
+	/* Retrieve blacklist info stored at probe. */
+	blacklist = usb_get_serial_data(serial);
+
 	iface_desc = &serial->interface->cur_altsetting->desc;
 
 	priv->bInterfaceNumber = iface_desc->bInterfaceNumber;
 	data->private = priv;
 
-	if (!is_blacklisted(iface_desc->bInterfaceNumber,
-			OPTION_BLACKLIST_SENDSETUP,
-			(struct option_blacklist_info *)id->driver_info)) {
+	if (!blacklist || !test_bit(iface_desc->bInterfaceNumber,
+						&blacklist->sendsetup)) {
 		data->send_setup = option_send_setup;
 	}
 	spin_lock_init(&data->susp_lock);