Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits)
  MAINTAINERS: linux-m32r is moderated for non-subscribers
  linux@lists.openrisc.net is moderated for non-subscribers
  Drop default from "DM365 codec select" choice
  parisc: Kconfig: cleanup Kernel page size default
  Kconfig: remove redundant CONFIG_ prefix on two symbols
  cris: remove arch/cris/arch-v32/lib/nand_init.S
  microblaze: add missing CONFIG_ prefixes
  h8300: drop puzzling Kconfig dependencies
  MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers
  tty: drop superfluous dependency in Kconfig
  ARM: mxc: fix Kconfig typo 'i.MX51'
  Fix file references in Kconfig files
  aic7xxx: fix Kconfig references to READMEs
  Fix file references in drivers/ide/
  thinkpad_acpi: Fix printk typo 'bluestooth'
  bcmring: drop commented out line in Kconfig
  btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888'
  doc: raw1394: Trivial typo fix
  CIFS: Don't free volume_info->UNC until we are entirely done with it.
  treewide: Correct spelling of successfully in comments
  ...

10 files changed, 7 insertions, 10 deletions

diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index a06e2c27b43..ff4d40d77c3 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -2969,7 +2969,7 @@ static irqreturn_t langwell_irq(int irq, void *_dev)
 		handle_port_change(dev);
 	}
 
-	/* suspend interrrupt */
+	/* suspend interrupt */
 	if (irq_sts & STS_SLI) {
 		dev_vdbg(&dev->pdev->dev, "suspend interrupt\n");
 		handle_bus_suspend(dev);
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index ce1ac2bcb31..0b3b8d0462d 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -335,7 +335,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 	} else {
 		/* Write dQH next pointer and terminate bit to 0 */
 		dqh->next_dtd_ptr = req->head->td_dma
-			& EP_QUEUE_HEAD_NEXT_POINTER_MASK;;
+			& EP_QUEUE_HEAD_NEXT_POINTER_MASK;
 		dqh->size_ioc_int_sts = 0;
 
 		/* Ensure that updates to the QH will occur before priming. */
@@ -376,7 +376,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 		}
 	}
 done:
-	return retval;;
+	return retval;
 }
 
 static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 3dd40b4e675..a218a4de5dc 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -2481,7 +2481,7 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
 	mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED);
 
 	/* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set.
-	 * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and
+	 * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRUPT set and
 	 * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT
 	 * only indicates a change in the reset state).
 	 */
diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h
index 5b7919460fd..81971fbc7ea 100644
--- a/drivers/usb/gadget/uvc.h
+++ b/drivers/usb/gadget/uvc.h
@@ -56,6 +56,7 @@ struct uvc_event
 #include <linux/usb.h>	/* For usb_endpoint_* */
 #include <linux/usb/gadget.h>
 #include <linux/videodev2.h>
+#include <linux/version.h>
 #include <media/v4l2-fh.h>
 
 #include "uvc_queue.h"
diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c
index 52f8f9e513a..cfb58384394 100644
--- a/drivers/usb/gadget/uvc_v4l2.c
+++ b/drivers/usb/gadget/uvc_v4l2.c
@@ -16,7 +16,6 @@
 #include <linux/errno.h>
 #include <linux/list.h>
 #include <linux/mutex.h>
-#include <linux/version.h>
 #include <linux/videodev2.h>
 #include <linux/vmalloc.h>
 #include <linux/wait.h>
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index e81820370d6..fe8d14cac43 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -704,7 +704,7 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 	 * most these gadgets, end of is signified either by a short packet,
 	 * or filling the last byte of the buffer.  (Sending extra data in
 	 * that last pckate should trigger an overflow fault.)  But in mode 1,
-	 * we don't get DMA completion interrrupt for short packets.
+	 * we don't get DMA completion interrupt for short packets.
 	 *
 	 * Theoretically, we could enable DMAReq irq (MUSB_RXCSR_DMAMODE = 1),
 	 * to get endpoint interrupt on every DMA req, but that didn't seem
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 86fbba6336c..e92cbefc0f8 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -227,7 +227,7 @@
 *  - All sleeps use a timeout of DIGI_RETRY_TIMEOUT before looping to
 *    recheck the condition they are sleeping on.  This is defensive,
 *    in case a wake up is lost.
-*  - Following Documentation/DocBook/kernel-locking.pdf no spin locks
+*  - Following Documentation/DocBook/kernel-locking.tmpl no spin locks
 *    are held when calling copy_to/from_user or printk.
 */
 
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 40abedbc594..3524a105d04 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -2006,7 +2006,6 @@ static int mos7720_ioctl(struct tty_struct *tty,
 		dbg("%s (%d) TIOCSERGETLSR", __func__,  port->number);
 		return get_lsr_info(tty, mos7720_port,
 					(unsigned int __user *)arg);
-		return 0;
 
 	/* FIXME: These should be using the mode methods */
 	case TIOCMBIS:
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 7b50aa12275..c72abd52498 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2263,7 +2263,6 @@ static int mos7840_ioctl(struct tty_struct *tty,
 	case TIOCSERGETLSR:
 		dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
 		return mos7840_get_lsr_info(tty, argp);
-		return 0;
 
 	case TIOCGSERIAL:
 		dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 34adc4b42ce..6fd13068481 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -25,7 +25,6 @@
 #include <linux/kthread.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>