uwb: Remove the WLP subsystem and drivers

The only Wimedia LLC Protocol (WLP) hardware was an Intel i1480 chip
with a beta release of firmware that was never commercially available as
a product.  This hardware and firmware is no longer available as Intel
sold their UWB/WLP IP.  I also see little prospect of other WLP
capable hardware ever being available.

Signed-off-by: David Vrabel <david.vrabel@csr.com>

9 files changed, 0 insertions, 2712 deletions

diff --git a/drivers/uwb/i1480/Makefile b/drivers/uwb/i1480/Makefile
index 212bbc7d4c3..d69da1684cf 100644
--- a/drivers/uwb/i1480/Makefile
+++ b/drivers/uwb/i1480/Makefile
@@ -1,2 +1 @@
 obj-$(CONFIG_UWB_I1480U)	+= dfu/ i1480-est.o
-obj-$(CONFIG_UWB_I1480U_WLP)	+= i1480u-wlp/
diff --git a/drivers/uwb/i1480/i1480-wlp.h b/drivers/uwb/i1480/i1480-wlp.h
deleted file mode 100644
index 18a8b0e4567..00000000000
--- a/drivers/uwb/i1480/i1480-wlp.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * Intel 1480 Wireless UWB Link
- * WLP specific definitions
- *
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * FIXME: docs
- */
-
-#ifndef __i1480_wlp_h__
-#define __i1480_wlp_h__
-
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/uwb.h>
-#include <linux/if_ether.h>
-#include <asm/byteorder.h>
-
-/* New simplified header format? */
-#undef WLP_HDR_FMT_2 		/* FIXME: rename */
-
-/**
- * Values of the Delivery ID & Type field when PCA or DRP
- *
- * The Delivery ID & Type field in the WLP TX header indicates whether
- * the frame is PCA or DRP. This is done based on the high level bit of
- * this field.
- * We use this constant to test if the traffic is PCA or DRP as follows:
- * if (wlp_tx_hdr_delivery_id_type(wlp_tx_hdr) & WLP_DRP)
- * 	this is DRP traffic
- * else
- * 	this is PCA traffic
- */
-enum deliver_id_type_bit {
-	WLP_DRP = 8,
-};
-
-/**
- * WLP TX header
- *
- * Indicates UWB/WLP-specific transmission parameters for a network
- * packet.
- */
-struct wlp_tx_hdr {
-	/* dword 0 */
-	struct uwb_dev_addr dstaddr;
-	u8                  key_index;
-	u8                  mac_params;
-	/* dword 1 */
-	u8                  phy_params;
-#ifndef WLP_HDR_FMT_2
-	u8                  reserved;
-	__le16              oui01;              /* FIXME: not so sure if __le16 or u8[2] */
-	/* dword 2 */
-	u8                  oui2;               /*        if all LE, it could be merged */
-	__le16              prid;
-#endif
-} __attribute__((packed));
-
-static inline int wlp_tx_hdr_delivery_id_type(const struct wlp_tx_hdr *hdr)
-{
-	return hdr->mac_params & 0x0f;
-}
-
-static inline int wlp_tx_hdr_ack_policy(const struct wlp_tx_hdr *hdr)
-{
-	return (hdr->mac_params >> 4) & 0x07;
-}
-
-static inline int wlp_tx_hdr_rts_cts(const struct wlp_tx_hdr *hdr)
-{
-	return (hdr->mac_params >> 7) & 0x01;
-}
-
-static inline void wlp_tx_hdr_set_delivery_id_type(struct wlp_tx_hdr *hdr, int id)
-{
-	hdr->mac_params = (hdr->mac_params & ~0x0f) | id;
-}
-
-static inline void wlp_tx_hdr_set_ack_policy(struct wlp_tx_hdr *hdr,
-					     enum uwb_ack_pol policy)
-{
-	hdr->mac_params = (hdr->mac_params & ~0x70) | (policy << 4);
-}
-
-static inline void wlp_tx_hdr_set_rts_cts(struct wlp_tx_hdr *hdr, int rts_cts)
-{
-	hdr->mac_params = (hdr->mac_params & ~0x80) | (rts_cts << 7);
-}
-
-static inline enum uwb_phy_rate wlp_tx_hdr_phy_rate(const struct wlp_tx_hdr *hdr)
-{
-	return hdr->phy_params & 0x0f;
-}
-
-static inline int wlp_tx_hdr_tx_power(const struct wlp_tx_hdr *hdr)
-{
-	return (hdr->phy_params >> 4) & 0x0f;
-}
-
-static inline void wlp_tx_hdr_set_phy_rate(struct wlp_tx_hdr *hdr, enum uwb_phy_rate rate)
-{
-	hdr->phy_params = (hdr->phy_params & ~0x0f) | rate;
-}
-
-static inline void wlp_tx_hdr_set_tx_power(struct wlp_tx_hdr *hdr, int pwr)
-{
-	hdr->phy_params = (hdr->phy_params & ~0xf0) | (pwr << 4);
-}
-
-
-/**
- * WLP RX header
- *
- * Provides UWB/WLP-specific transmission data for a received
- * network packet.
- */
-struct wlp_rx_hdr {
-	/* dword 0 */
-	struct uwb_dev_addr dstaddr;
-	struct uwb_dev_addr srcaddr;
-	/* dword 1 */
-	u8 		    LQI;
-	s8		    RSSI;
-	u8		    reserved3;
-#ifndef WLP_HDR_FMT_2
-	u8 		    oui0;
-	/* dword 2 */
-	__le16		    oui12;
-	__le16		    prid;
-#endif
-} __attribute__((packed));
-
-
-/** User configurable options for WLP */
-struct wlp_options {
-	struct mutex mutex; /* access to user configurable options*/
-	struct wlp_tx_hdr def_tx_hdr;	/* default tx hdr */
-	u8 pca_base_priority;
-	u8 bw_alloc; /*index into bw_allocs[] for PCA/DRP reservations*/
-};
-
-
-static inline
-void wlp_options_init(struct wlp_options *options)
-{
-	mutex_init(&options->mutex);
-	wlp_tx_hdr_set_ack_policy(&options->def_tx_hdr, UWB_ACK_INM);
-	wlp_tx_hdr_set_rts_cts(&options->def_tx_hdr, 1);
-	/* FIXME: default to phy caps */
-	wlp_tx_hdr_set_phy_rate(&options->def_tx_hdr, UWB_PHY_RATE_480);
-#ifndef WLP_HDR_FMT_2
-	options->def_tx_hdr.prid = cpu_to_le16(0x0000);
-#endif
-}
-
-
-/* sysfs helpers */
-
-extern ssize_t uwb_pca_base_priority_store(struct wlp_options *,
-					   const char *, size_t);
-extern ssize_t uwb_pca_base_priority_show(const struct wlp_options *, char *);
-extern ssize_t uwb_bw_alloc_store(struct wlp_options *, const char *, size_t);
-extern ssize_t uwb_bw_alloc_show(const struct wlp_options *, char *);
-extern ssize_t uwb_ack_policy_store(struct wlp_options *,
-				    const char *, size_t);
-extern ssize_t uwb_ack_policy_show(const struct wlp_options *, char *);
-extern ssize_t uwb_rts_cts_store(struct wlp_options *, const char *, size_t);
-extern ssize_t uwb_rts_cts_show(const struct wlp_options *, char *);
-extern ssize_t uwb_phy_rate_store(struct wlp_options *, const char *, size_t);
-extern ssize_t uwb_phy_rate_show(const struct wlp_options *, char *);
-
-
-/** Simple bandwidth allocation (temporary and too simple) */
-struct wlp_bw_allocs {
-	const char *name;
-	struct {
-		u8 mask, stream;
-	} tx, rx;
-};
-
-
-#endif /* #ifndef __i1480_wlp_h__ */
diff --git a/drivers/uwb/i1480/i1480u-wlp/Makefile b/drivers/uwb/i1480/i1480u-wlp/Makefile
deleted file mode 100644
index fe6709b8e68..00000000000
--- a/drivers/uwb/i1480/i1480u-wlp/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-obj-$(CONFIG_UWB_I1480U_WLP) += i1480u-wlp.o
-
-i1480u-wlp-objs :=	\
-	lc.o		\
-	netdev.o	\
-	rx.o		\
-	sysfs.o		\
-	tx.o
diff --git a/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h b/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h
deleted file mode 100644
index 2e31f536a34..00000000000
--- a/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * Intel 1480 Wireless UWB Link USB
- * Header formats, constants, general internal interfaces
- *
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * This is not an standard interface.
- *
- * FIXME: docs
- *
- * i1480u-wlp is pretty simple: two endpoints, one for tx, one for
- * rx. rx is polled. Network packets (ethernet, whatever) are wrapped
- * in i1480 TX or RX headers (for sending over the air), and these
- * packets are wrapped in UNTD headers (for sending to the WLP UWB
- * controller).
- *
- * UNTD packets (UNTD hdr + i1480 hdr + network packet) packets
- * cannot be bigger than i1480u_MAX_FRG_SIZE. When this happens, the
- * i1480 packet is broken in chunks/packets:
- *
- * UNTD-1st.hdr + i1480.hdr + payload
- * UNTD-next.hdr + payload
- * ...
- * UNTD-last.hdr + payload
- *
- * so that each packet is smaller or equal than i1480u_MAX_FRG_SIZE.
- *
- * All HW structures and bitmaps are little endian, so we need to play
- * ugly tricks when defining bitfields. Hoping for the day GCC
- * implements __attribute__((endian(1234))).
- *
- * FIXME: ROADMAP to the whole implementation
- */
-
-#ifndef __i1480u_wlp_h__
-#define __i1480u_wlp_h__
-
-#include <linux/usb.h>
-#include <linux/netdevice.h>
-#include <linux/uwb.h>		/* struct uwb_rc, struct uwb_notifs_handler */
-#include <linux/wlp.h>
-#include "../i1480-wlp.h"
-
-#undef i1480u_FLOW_CONTROL	/* Enable flow control code */
-
-/**
- * Basic flow control
- */
-enum {
-	i1480u_TX_INFLIGHT_MAX = 1000,
-	i1480u_TX_INFLIGHT_THRESHOLD = 100,
-};
-
-/** Maximum size of a transaction that we can tx/rx */
-enum {
-	/* Maximum packet size computed as follows: max UNTD header (8) +
-	 * i1480 RX header (8) + max Ethernet header and payload (4096) +
-	 * Padding added by skb_reserve (2) to make post Ethernet payload
-	 * start on 16 byte boundary*/
-	i1480u_MAX_RX_PKT_SIZE = 4114,
-	i1480u_MAX_FRG_SIZE = 512,
-	i1480u_RX_BUFS = 9,
-};
-
-
-/**
- * UNTD packet type
- *
- * We need to fragment any payload whose UNTD packet is going to be
- * bigger than i1480u_MAX_FRG_SIZE.
- */
-enum i1480u_pkt_type {
-	i1480u_PKT_FRAG_1ST = 0x1,
-	i1480u_PKT_FRAG_NXT = 0x0,
-	i1480u_PKT_FRAG_LST = 0x2,
-	i1480u_PKT_FRAG_CMP = 0x3
-};
-enum {
-	i1480u_PKT_NONE = 0x4,
-};
-
-/** USB Network Transfer Descriptor - common */
-struct untd_hdr {
-	u8     type;
-	__le16 len;
-} __attribute__((packed));
-
-static inline enum i1480u_pkt_type untd_hdr_type(const struct untd_hdr *hdr)
-{
-	return hdr->type & 0x03;
-}
-
-static inline int untd_hdr_rx_tx(const struct untd_hdr *hdr)
-{
-	return (hdr->type >> 2) & 0x01;
-}
-
-static inline void untd_hdr_set_type(struct untd_hdr *hdr, enum i1480u_pkt_type type)
-{
-	hdr->type = (hdr->type & ~0x03) | type;
-}
-
-static inline void untd_hdr_set_rx_tx(struct untd_hdr *hdr, int rx_tx)
-{
-	hdr->type = (hdr->type & ~0x04) | (rx_tx << 2);
-}
-
-
-/**
- * USB Network Transfer Descriptor - Complete Packet
- *
- * This is for a packet that is smaller (header + payload) than
- * i1480u_MAX_FRG_SIZE.
- *
- * @hdr.total_len is the size of the payload; the payload doesn't
- * count this header nor the padding, but includes the size of i1480
- * header.
- */
-struct untd_hdr_cmp {
-	struct untd_hdr	hdr;
-	u8		padding;
-} __attribute__((packed));
-
-
-/**
- * USB Network Transfer Descriptor - First fragment
- *
- * @hdr.len is the size of the *whole packet* (excluding UNTD
- * headers); @fragment_len is the size of the payload (excluding UNTD
- * headers, but including i1480 headers).
- */
-struct untd_hdr_1st {
-	struct untd_hdr	hdr;
-	__le16		fragment_len;
-	u8		padding[3];
-} __attribute__((packed));
-
-
-/**
- * USB Network Transfer Descriptor - Next / Last [Rest]
- *
- * @hdr.len is the size of the payload, not including headrs.
- */
-struct untd_hdr_rst {
-	struct untd_hdr	hdr;
-	u8		padding;
-} __attribute__((packed));
-
-
-/**
- * Transmission context
- *
- * Wraps all the stuff needed to track a pending/active tx
- * operation.
- */
-struct i1480u_tx {
-	struct list_head list_node;
-	struct i1480u *i1480u;
-	struct urb *urb;
-
-	struct sk_buff *skb;
-	struct wlp_tx_hdr *wlp_tx_hdr;
-
-	void *buf;	/* if NULL, no new buf was used */
-	size_t buf_size;
-};
-
-/**
- * Basic flow control
- *
- * We maintain a basic flow control counter. "count" how many TX URBs are
- * outstanding. Only allow "max"
- * TX URBs to be outstanding. If this value is reached the queue will be
- * stopped. The queue will be restarted when there are
- * "threshold" URBs outstanding.
- * Maintain a counter of how many time the TX queue needed to be restarted
- * due to the "max" being exceeded and the "threshold" reached again. The
- * timestamp "restart_ts" is to keep track from when the counter was last
- * queried (see sysfs handling of file wlp_tx_inflight).
- */
-struct i1480u_tx_inflight {
-	atomic_t count;
-	unsigned long max;
-	unsigned long threshold;
-	unsigned long restart_ts;
-	atomic_t restart_count;
-};
-
-/**
- * Instance of a i1480u WLP interface
- *
- * Keeps references to the USB device that wraps it, as well as it's
- * interface and associated UWB host controller. As well, it also
- * keeps a link to the netdevice for integration into the networking
- * stack.
- * We maintian separate error history for the tx and rx endpoints because
- * the implementation does not rely on locking - having one shared
- * structure between endpoints may cause problems. Adding locking to the
- * implementation will have higher cost than adding a separate structure.
- */
-struct i1480u {
-	struct usb_device *usb_dev;
-	struct usb_interface *usb_iface;
-	struct net_device *net_dev;
-
-	spinlock_t lock;
-
-	/* RX context handling */
-	struct sk_buff *rx_skb;
-	struct uwb_dev_addr rx_srcaddr;
-	size_t rx_untd_pkt_size;
-	struct i1480u_rx_buf {
-		struct i1480u *i1480u;	/* back pointer */
-		struct urb *urb;
-		struct sk_buff *data;	/* i1480u_MAX_RX_PKT_SIZE each */
-	} rx_buf[i1480u_RX_BUFS];	/* N bufs */
-
-	spinlock_t tx_list_lock;	/* TX context */
-	struct list_head tx_list;
-	u8 tx_stream;
-
-	struct stats lqe_stats, rssi_stats;	/* radio statistics */
-
-	/* Options we can set from sysfs */
-	struct wlp_options options;
-	struct uwb_notifs_handler uwb_notifs_handler;
-	struct edc tx_errors;
-	struct edc rx_errors;
-	struct wlp wlp;
-#ifdef i1480u_FLOW_CONTROL
-	struct urb *notif_urb;
-	struct edc notif_edc;		/* error density counter */
-	u8 notif_buffer[1];
-#endif
-	struct i1480u_tx_inflight tx_inflight;
-};
-
-/* Internal interfaces */
-extern void i1480u_rx_cb(struct urb *urb);
-extern int i1480u_rx_setup(struct i1480u *);
-extern void i1480u_rx_release(struct i1480u *);
-extern void i1480u_tx_release(struct i1480u *);
-extern int i1480u_xmit_frame(struct wlp *, struct sk_buff *,
-			     struct uwb_dev_addr *);
-extern void i1480u_stop_queue(struct wlp *);
-extern void i1480u_start_queue(struct wlp *);
-extern int i1480u_sysfs_setup(struct i1480u *);
-extern void i1480u_sysfs_release(struct i1480u *);
-
-/* netdev interface */
-extern int i1480u_open(struct net_device *);
-extern int i1480u_stop(struct net_device *);
-extern netdev_tx_t i1480u_hard_start_xmit(struct sk_buff *,
-						struct net_device *);
-extern void i1480u_tx_timeout(struct net_device *);
-extern int i1480u_set_config(struct net_device *, struct ifmap *);
-extern int i1480u_change_mtu(struct net_device *, int);
-extern void i1480u_uwb_notifs_cb(void *, struct uwb_dev *, enum uwb_notifs);
-
-/* bandwidth allocation callback */
-extern void  i1480u_bw_alloc_cb(struct uwb_rsv *);
-
-/* Sys FS */
-extern struct attribute_group i1480u_wlp_attr_group;
-
-#endif /* #ifndef __i1480u_wlp_h__ */
diff --git a/drivers/uwb/i1480/i1480u-wlp/lc.c b/drivers/uwb/i1480/i1480u-wlp/lc.c
deleted file mode 100644
index def778cf221..00000000000
--- a/drivers/uwb/i1480/i1480u-wlp/lc.c
+++ /dev/null
@@ -1,424 +0,0 @@
-/*
- * WUSB Wire Adapter: WLP interface
- * Driver for the Linux Network stack.
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * FIXME: docs
- *
- * This implements a very simple network driver for the WLP USB
- * device that is associated to a UWB (Ultra Wide Band) host.
- *
- * This is seen as an interface of a composite device. Once the UWB
- * host has an association to another WLP capable device, the
- * networking interface (aka WLP) can start to send packets back and
- * forth.
- *
- * Limitations:
- *
- *  - Hand cranked; can't ifup the interface until there is an association
- *
- *  - BW allocation very simplistic [see i1480u_mas_set() and callees].
- *
- *
- * ROADMAP:
- *
- *   ENTRY POINTS (driver model):
- *
- *     i1480u_driver_{exit,init}(): initialization of the driver.
- *
- *     i1480u_probe(): called by the driver code when a device
- *                     matching 'i1480u_id_table' is connected.
- *
- *                     This allocs a netdev instance, inits with
- *                     i1480u_add(), then registers_netdev().
- *         i1480u_init()
- *         i1480u_add()
- *
- *     i1480u_disconnect(): device has been disconnected/module
- *                          is being removed.
- *         i1480u_rm()
- */
-#include <linux/gfp.h>
-#include <linux/if_arp.h>
-#include <linux/etherdevice.h>
-
-#include "i1480u-wlp.h"
-
-
-
-static inline
-void i1480u_init(struct i1480u *i1480u)
-{
-	/* nothing so far... doesn't it suck? */
-	spin_lock_init(&i1480u->lock);
-	INIT_LIST_HEAD(&i1480u->tx_list);
-	spin_lock_init(&i1480u->tx_list_lock);
-	wlp_options_init(&i1480u->options);
-	edc_init(&i1480u->tx_errors);
-	edc_init(&i1480u->rx_errors);
-#ifdef i1480u_FLOW_CONTROL
-	edc_init(&i1480u->notif_edc);
-#endif
-	stats_init(&i1480u->lqe_stats);
-	stats_init(&i1480u->rssi_stats);
-	wlp_init(&i1480u->wlp);
-}
-
-/**
- * Fill WLP device information structure
- *
- * The structure will contain a few character arrays, each ending with a
- * null terminated string. Each string has to fit (excluding terminating
- * character) into a specified range obtained from the WLP substack.
- *
- * It is still not clear exactly how this device information should be
- * obtained. Until we find out we use the USB device descriptor as backup, some
- * information elements have intuitive mappings, other not.
- */
-static
-void i1480u_fill_device_info(struct wlp *wlp, struct wlp_device_info *dev_info)
-{
-	struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp);
-	struct usb_device *usb_dev = i1480u->usb_dev;
-	/* Treat device name and model name the same */
-	if (usb_dev->descriptor.iProduct) {
-		usb_string(usb_dev, usb_dev->descriptor.iProduct,
-			   dev_info->name, sizeof(dev_info->name));
-		usb_string(usb_dev, usb_dev->descriptor.iProduct,
-			   dev_info->model_name, sizeof(dev_info->model_name));
-	}
-	if (usb_dev->descriptor.iManufacturer)
-		usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
-			   dev_info->manufacturer,
-			   sizeof(dev_info->manufacturer));
-	scnprintf(dev_info->model_nr, sizeof(dev_info->model_nr), "%04x",
-		  __le16_to_cpu(usb_dev->descriptor.bcdDevice));
-	if (usb_dev->descriptor.iSerialNumber)
-		usb_string(usb_dev, usb_dev->descriptor.iSerialNumber,
-			   dev_info->serial, sizeof(dev_info->serial));
-	/* FIXME: where should we obtain category? */
-	dev_info->prim_dev_type.category = cpu_to_le16(WLP_DEV_CAT_OTHER);
-	/* FIXME: Complete OUI and OUIsubdiv attributes */
-}
-
-#ifdef i1480u_FLOW_CONTROL
-/**
- * Callback for the notification endpoint
- *
- * This mostly controls the xon/xoff protocol. In case of hard error,
- * we stop the queue. If not, we always retry.
- */
-static
-void i1480u_notif_cb(struct urb *urb, struct pt_regs *regs)
-{
-	struct i1480u *i1480u = urb->context;
-	struct usb_interface *usb_iface = i1480u->usb_iface;
-	struct device *dev = &usb_iface->dev;
-	int result;
-
-	switch (urb->status) {
-	case 0:				/* Got valid data, do xon/xoff */
-		switch (i1480u->notif_buffer[0]) {
-		case 'N':
-			dev_err(dev, "XOFF STOPPING queue at %lu\n", jiffies);
-			netif_stop_queue(i1480u->net_dev);
-			break;
-		case 'A':
-			dev_err(dev, "XON STARTING queue at %lu\n", jiffies);
-			netif_start_queue(i1480u->net_dev);
-			break;
-		default:
-			dev_err(dev, "NEP: unknown data 0x%02hhx\n",
-				i1480u->notif_buffer[0]);
-		}
-		break;
-	case -ECONNRESET:		/* Controlled situation ... */
-	case -ENOENT:			/* we killed the URB... */
-		dev_err(dev, "NEP: URB reset/noent %d\n", urb->status);
-		goto error;
-	case -ESHUTDOWN:		/* going away! */
-		dev_err(dev, "NEP: URB down %d\n", urb->status);
-		goto error;
-	default:			/* Retry unless it gets ugly */
-		if (edc_inc(&i1480u->notif_edc, EDC_MAX_ERRORS,
-			    EDC_ERROR_TIMEFRAME)) {
-			dev_err(dev, "NEP: URB max acceptable errors "
-				"exceeded; resetting device\n");
-			goto error_reset;
-		}
-		dev_err(dev, "NEP: URB error %d\n", urb->status);
-		break;
-	}
-	result = usb_submit_urb(urb, GFP_ATOMIC);
-	if (result < 0) {
-		dev_err(dev, "NEP: Can't resubmit URB: %d; resetting device\n",
-			result);
-		goto error_reset;
-	}
-	return;
-
-error_reset:
-	wlp_reset_all(&i1480-wlp);
-error:
-	netif_stop_queue(i1480u->net_dev);
-	return;
-}
-#endif
-
-static const struct net_device_ops i1480u_netdev_ops = {
-	.ndo_open	= i1480u_open,
-	.ndo_stop 	= i1480u_stop,
-	.ndo_start_xmit = i1480u_hard_start_xmit,
-	.ndo_tx_timeout = i1480u_tx_timeout,
-	.ndo_set_config = i1480u_set_config,
-	.ndo_change_mtu = i1480u_change_mtu,
-};
-
-static
-int i1480u_add(struct i1480u *i1480u, struct usb_interface *iface)
-{
-	int result = -ENODEV;
-	struct wlp *wlp = &i1480u->wlp;
-	struct usb_device *usb_dev = interface_to_usbdev(iface);
-	struct net_device *net_dev = i1480u->net_dev;
-	struct uwb_rc *rc;
-	struct uwb_dev *uwb_dev;
-#ifdef i1480u_FLOW_CONTROL
-	struct usb_endpoint_descriptor *epd;
-#endif
-
-	i1480u->usb_dev = usb_get_dev(usb_dev);
-	i1480u->usb_iface = iface;
-	rc = uwb_rc_get_by_grandpa(&i1480u->usb_dev->dev);
-	if (rc == NULL) {
-		dev_err(&iface->dev, "Cannot get associated UWB Radio "
-			"Controller\n");
-		goto out;
-	}
-	wlp->xmit_frame = i1480u_xmit_frame;
-	wlp->fill_device_info = i1480u_fill_device_info;
-	wlp->stop_queue = i1480u_stop_queue;
-	wlp->start_queue = i1480u_start_queue;
-	result = wlp_setup(wlp, rc, net_dev);
-	if (result < 0) {
-		dev_err(&iface->dev, "Cannot setup WLP\n");
-		goto error_wlp_setup;
-	}
-	result = 0;
-	ether_setup(net_dev);			/* make it an etherdevice */
-	uwb_dev = &rc->uwb_dev;
-	/* FIXME: hookup address change notifications? */
-
-	memcpy(net_dev->dev_addr, uwb_dev->mac_addr.data,
-	       sizeof(net_dev->dev_addr));
-
-	net_dev->hard_header_len = sizeof(struct untd_hdr_cmp)
-		+ sizeof(struct wlp_tx_hdr)
-		+ WLP_DATA_HLEN
-		+ ETH_HLEN;
-	net_dev->mtu = 3500;
-	net_dev->tx_queue_len = 20;		/* FIXME: maybe use 1000? */
-
-/*	net_dev->flags &= ~IFF_BROADCAST;	FIXME: BUG in firmware */
-	/* FIXME: multicast disabled */
-	net_dev->flags &= ~IFF_MULTICAST;
-	net_dev->features &= ~NETIF_F_SG;
-	net_dev->features &= ~NETIF_F_FRAGLIST;
-	/* All NETIF_F_*_CSUM disabled */
-	net_dev->features |= NETIF_F_HIGHDMA;
-	net_dev->watchdog_timeo = 5*HZ;		/* FIXME: a better default? */
-
-	net_dev->netdev_ops = &i1480u_netdev_ops;
-
-#ifdef i1480u_FLOW_CONTROL
-	/* Notification endpoint setup (submitted when we open the device) */
-	i1480u->notif_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (i1480u->notif_urb == NULL) {
-		dev_err(&iface->dev, "Unable to allocate notification URB\n");
-		result = -ENOMEM;
-		goto error_urb_alloc;
-	}
-	epd = &iface->cur_altsetting->endpoint[0].desc;
-	usb_fill_int_urb(i1480u->notif_urb, usb_dev,
-			 usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
-			 i1480u->notif_buffer, sizeof(i1480u->notif_buffer),
-			 i1480u_notif_cb, i1480u, epd->bInterval);
-
-#endif
-
-	i1480u->tx_inflight.max = i1480u_TX_INFLIGHT_MAX;
-	i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD;
-	i1480u->tx_inflight.restart_ts = jiffies;
-	usb_set_intfdata(iface, i1480u);
-	return result;
-
-#ifdef i1480u_FLOW_CONTROL
-error_urb_alloc:
-#endif
-	wlp_remove(wlp);
-error_wlp_setup:
-	uwb_rc_put(rc);
-out:
-	usb_put_dev(i1480u->usb_dev);
-	return result;
-}
-
-static void i1480u_rm(struct i1480u *i1480u)
-{
-	struct uwb_rc *rc = i1480u->wlp.rc;
-	usb_set_intfdata(i1480u->usb_iface, NULL);
-#ifdef i1480u_FLOW_CONTROL
-	usb_kill_urb(i1480u->notif_urb);
-	usb_free_urb(i1480u->notif_urb);
-#endif
-	wlp_remove(&i1480u->wlp);
-	uwb_rc_put(rc);
-	usb_put_dev(i1480u->usb_dev);
-}
-
-/** Just setup @net_dev's i1480u private data */
-static void i1480u_netdev_setup(struct net_device *net_dev)
-{
-	struct i1480u *i1480u = netdev_priv(net_dev);
-	/* Initialize @i1480u */
-	memset(i1480u, 0, sizeof(*i1480u));
-	i1480u_init(i1480u);
-}
-
-/**
- * Probe a i1480u interface and register it
- *
- * @iface:   USB interface to link to
- * @id:      USB class/subclass/protocol id
- * @returns: 0 if ok, < 0 errno code on error.
- *
- * Does basic housekeeping stuff and then allocs a netdev with space
- * for the i1480u  data. Initializes, registers in i1480u, registers in
- * netdev, ready to go.
- */
-static int i1480u_probe(struct usb_interface *iface,
-			const struct usb_device_id *id)
-{
-	int result;
-	struct net_device *net_dev;
-	struct device *dev = &iface->dev;
-	struct i1480u *i1480u;
-
-	/* Allocate instance [calls i1480u_netdev_setup() on it] */
-	result = -ENOMEM;
-	net_dev = alloc_netdev(sizeof(*i1480u), "wlp%d", i1480u_netdev_setup);
-	if (net_dev == NULL) {
-		dev_err(dev, "no memory for network device instance\n");
-		goto error_alloc_netdev;
-	}
-	SET_NETDEV_DEV(net_dev, dev);
-	i1480u = netdev_priv(net_dev);
-	i1480u->net_dev = net_dev;
-	result = i1480u_add(i1480u, iface);	/* Now setup all the wlp stuff */
-	if (result < 0) {
-		dev_err(dev, "cannot add i1480u device: %d\n", result);
-		goto error_i1480u_add;
-	}
-	result = register_netdev(net_dev);	/* Okey dokey, bring it up */
-	if (result < 0) {
-		dev_err(dev, "cannot register network device: %d\n", result);
-		goto error_register_netdev;
-	}
-	i1480u_sysfs_setup(i1480u);
-	if (result < 0)
-		goto error_sysfs_init;
-	return 0;
-
-error_sysfs_init:
-	unregister_netdev(net_dev);
-error_register_netdev:
-	i1480u_rm(i1480u);
-error_i1480u_add:
-	free_netdev(net_dev);
-error_alloc_netdev:
-	return result;
-}
-
-
-/**
- * Disconect a i1480u from the system.
- *
- * i1480u_stop() has been called before, so al the rx and tx contexts
- * have been taken down already. Make sure the queue is stopped,
- * unregister netdev and i1480u, free and kill.
- */
-static void i1480u_disconnect(struct usb_interface *iface)
-{
-	struct i1480u *i1480u;
-	struct net_device *net_dev;
-
-	i1480u = usb_get_intfdata(iface);
-	net_dev = i1480u->net_dev;
-	netif_stop_queue(net_dev);
-#ifdef i1480u_FLOW_CONTROL
-	usb_kill_urb(i1480u->notif_urb);
-#endif
-	i1480u_sysfs_release(i1480u);
-	unregister_netdev(net_dev);
-	i1480u_rm(i1480u);
-	free_netdev(net_dev);
-}
-
-static struct usb_device_id i1480u_id_table[] = {
-	{
-		.match_flags = USB_DEVICE_ID_MATCH_DEVICE \
-				|  USB_DEVICE_ID_MATCH_DEV_INFO \
-				|  USB_DEVICE_ID_MATCH_INT_INFO,
-		.idVendor = 0x8086,
-		.idProduct = 0x0c3b,
-		.bDeviceClass = 0xef,
-		.bDeviceSubClass = 0x02,
-		.bDeviceProtocol = 0x02,
-		.bInterfaceClass = 0xff,
-		.bInterfaceSubClass = 0xff,
-		.bInterfaceProtocol = 0xff,
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(usb, i1480u_id_table);
-
-static struct usb_driver i1480u_driver = {
-	.name =		KBUILD_MODNAME,
-	.probe =	i1480u_probe,
-	.disconnect =	i1480u_disconnect,
-	.id_table =	i1480u_id_table,
-};
-
-static int __init i1480u_driver_init(void)
-{
-	return usb_register(&i1480u_driver);
-}
-module_init(i1480u_driver_init);
-
-
-static void __exit i1480u_driver_exit(void)
-{
-	usb_deregister(&i1480u_driver);
-}
-module_exit(i1480u_driver_exit);
-
-MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
-MODULE_DESCRIPTION("i1480 Wireless UWB Link WLP networking for USB");
-MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/i1480/i1480u-wlp/netdev.c b/drivers/uwb/i1480/i1480u-wlp/netdev.c
deleted file mode 100644
index f98f6ce8b9e..00000000000
--- a/drivers/uwb/i1480/i1480u-wlp/netdev.c
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- * WUSB Wire Adapter: WLP interface
- * Driver for the Linux Network stack.
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * FIXME: docs
- *
- * Implementation of the netdevice linkage (except tx and rx related stuff).
- *
- * ROADMAP:
- *
- *   ENTRY POINTS (Net device):
- *
- *     i1480u_open(): Called when we ifconfig up the interface;
- *                    associates to a UWB host controller, reserves
- *                    bandwidth (MAS), sets up RX USB URB and starts
- *                    the queue.
- *
- *     i1480u_stop(): Called when we ifconfig down a interface;
- *                    reverses _open().
- *
- *     i1480u_set_config():
- */
-
-#include <linux/slab.h>
-#include <linux/if_arp.h>
-#include <linux/etherdevice.h>
-
-#include "i1480u-wlp.h"
-
-struct i1480u_cmd_set_ip_mas {
-	struct uwb_rccb     rccb;
-	struct uwb_dev_addr addr;
-	u8                  stream;
-	u8                  owner;
-	u8                  type;	/* enum uwb_drp_type */
-	u8                  baMAS[32];
-} __attribute__((packed));
-
-
-static
-int i1480u_set_ip_mas(
-	struct uwb_rc *rc,
-	const struct uwb_dev_addr *dstaddr,
-	u8 stream, u8 owner, u8 type, unsigned long *mas)
-{
-
-	int result;
-	struct i1480u_cmd_set_ip_mas *cmd;
-	struct uwb_rc_evt_confirm reply;
-
-	result = -ENOMEM;
-	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
-	if (cmd == NULL)
-		goto error_kzalloc;
-	cmd->rccb.bCommandType = 0xfd;
-	cmd->rccb.wCommand = cpu_to_le16(0x000e);
-	cmd->addr = *dstaddr;
-	cmd->stream = stream;
-	cmd->owner = owner;
-	cmd->type = type;
-	if (mas == NULL)
-		memset(cmd->baMAS, 0x00, sizeof(cmd->baMAS));
-	else
-		memcpy(cmd->baMAS, mas, sizeof(cmd->baMAS));
-	reply.rceb.bEventType = 0xfd;
-	reply.rceb.wEvent = cpu_to_le16(0x000e);
-	result = uwb_rc_cmd(rc, "SET-IP-MAS", &cmd->rccb, sizeof(*cmd),
-			    &reply.rceb, sizeof(reply));
-	if (result < 0)
-		goto error_cmd;
-	if (reply.bResultCode != UWB_RC_RES_FAIL) {
-		dev_err(&rc->uwb_dev.dev,
-			"SET-IP-MAS: command execution failed: %d\n",
-			reply.bResultCode);
-		result = -EIO;
-	}
-error_cmd:
-	kfree(cmd);
-error_kzalloc:
-	return result;
-}
-
-/*
- * Inform a WLP interface of a MAS reservation
- *
- * @rc is assumed refcnted.
- */
-/* FIXME: detect if remote device is WLP capable? */
-static int i1480u_mas_set_dev(struct uwb_dev *uwb_dev, struct uwb_rc *rc,
-			      u8 stream, u8 owner, u8 type, unsigned long *mas)
-{
-	int result = 0;
-	struct device *dev = &rc->uwb_dev.dev;
-
-	result = i1480u_set_ip_mas(rc, &uwb_dev->dev_addr, stream, owner,
-				   type, mas);
-	if (result < 0) {
-		char rcaddrbuf[UWB_ADDR_STRSIZE], devaddrbuf[UWB_ADDR_STRSIZE];
-		uwb_dev_addr_print(rcaddrbuf, sizeof(rcaddrbuf),
-				   &rc->uwb_dev.dev_addr);
-		uwb_dev_addr_print(devaddrbuf, sizeof(devaddrbuf),
-				   &uwb_dev->dev_addr);
-		dev_err(dev, "Set IP MAS (%s to %s) failed: %d\n",
-			rcaddrbuf, devaddrbuf, result);
-	}
-	return result;
-}
-
-/**
- * Called by bandwidth allocator when change occurs in reservation.
- *
- * @rsv:     The reservation that is being established, modified, or
- *           terminated.
- *
- * When a reservation is established, modified, or terminated the upper layer
- * (WLP here) needs set/update the currently available Media Access Slots
- * that can be use for IP traffic.
- *
- * Our action taken during failure depends on how the reservation is being
- * changed:
- * - if reservation is being established we do nothing if we cannot set the
- *   new MAS to be used
- * - if reservation is being terminated we revert back to PCA whether the
- *   SET IP MAS command succeeds or not.
- */
-void i1480u_bw_alloc_cb(struct uwb_rsv *rsv)
-{
-	int result = 0;
-	struct i1480u *i1480u = rsv->pal_priv;
-	struct device *dev = &i1480u->usb_iface->dev;
-	struct uwb_dev *target_dev = rsv->target.dev;
-	struct uwb_rc *rc = i1480u->wlp.rc;
-	u8 stream = rsv->stream;
-	int type = rsv->type;
-	int is_owner = rsv->owner == &rc->uwb_dev;
-	unsigned long *bmp = rsv->mas.bm;
-
-	dev_err(dev, "WLP callback called - sending set ip mas\n");
-	/*user cannot change options while setting configuration*/
-	mutex_lock(&i1480u->options.mutex);
-	switch (rsv->state) {
-	case UWB_RSV_STATE_T_ACCEPTED:
-	case UWB_RSV_STATE_O_ESTABLISHED:
-		result = i1480u_mas_set_dev(target_dev, rc, stream, is_owner,
-					type, bmp);
-		if (result < 0) {
-			dev_err(dev, "MAS reservation failed: %d\n", result);
-			goto out;
-		}
-		if (is_owner) {
-			wlp_tx_hdr_set_delivery_id_type(&i1480u->options.def_tx_hdr,
-							WLP_DRP | stream);
-			wlp_tx_hdr_set_rts_cts(&i1480u->options.def_tx_hdr, 0);
-		}
-		break;
-	case UWB_RSV_STATE_NONE:
-		/* revert back to PCA */
-		result = i1480u_mas_set_dev(target_dev, rc, stream, is_owner,
-					    type, bmp);
-		if (result < 0)
-			dev_err(dev, "MAS reservation failed: %d\n", result);
-		/* Revert to PCA even though SET IP MAS failed. */
-		wlp_tx_hdr_set_delivery_id_type(&i1480u->options.def_tx_hdr,
-						i1480u->options.pca_base_priority);
-		wlp_tx_hdr_set_rts_cts(&i1480u->options.def_tx_hdr, 1);
-		break;
-	default:
-		dev_err(dev, "unexpected WLP reservation state: %s (%d).\n",
-			uwb_rsv_state_str(rsv->state), rsv->state);
-		break;
-	}
-out:
-	mutex_unlock(&i1480u->options.mutex);
-	return;
-}
-
-/**
- *
- * Called on 'ifconfig up'
- */
-int i1480u_open(struct net_device *net_dev)
-{
-	int result;
-	struct i1480u *i1480u = netdev_priv(net_dev);
-	struct wlp *wlp = &i1480u->wlp;
-	struct uwb_rc *rc;
-	struct device *dev = &i1480u->usb_iface->dev;
-
-	rc = wlp->rc;
-	result = i1480u_rx_setup(i1480u);		/* Alloc RX stuff */
-	if (result < 0)
-		goto error_rx_setup;
-
-	result = uwb_radio_start(&wlp->pal);
-	if (result < 0)
-		goto error_radio_start;
-
-	netif_wake_queue(net_dev);
-#ifdef i1480u_FLOW_CONTROL
-	result = usb_submit_urb(i1480u->notif_urb, GFP_KERNEL);
-	if (result < 0) {
-		dev_err(dev, "Can't submit notification URB: %d\n", result);
-		goto error_notif_urb_submit;
-	}
-#endif
-	/* Interface is up with an address, now we can create WSS */
-	result = wlp_wss_setup(net_dev, &wlp->wss);
-	if (result < 0) {
-		dev_err(dev, "Can't create WSS: %d. \n", result);
-		goto error_wss_setup;
-	}
-	return 0;
-error_wss_setup:
-#ifdef i1480u_FLOW_CONTROL
-	usb_kill_urb(i1480u->notif_urb);
-error_notif_urb_submit:
-#endif
-	uwb_radio_stop(&wlp->pal);
-error_radio_start:
-	netif_stop_queue(net_dev);
-	i1480u_rx_release(i1480u);
-error_rx_setup:
-	return result;
-}
-
-
-/**
- * Called on 'ifconfig down'
- */
-int i1480u_stop(struct net_device *net_dev)
-{
-	struct i1480u *i1480u = netdev_priv(net_dev);
-	struct wlp *wlp = &i1480u->wlp;
-
-	BUG_ON(wlp->rc == NULL);
-	wlp_wss_remove(&wlp->wss);
-	netif_carrier_off(net_dev);
-#ifdef i1480u_FLOW_CONTROL
-	usb_kill_urb(i1480u->notif_urb);
-#endif
-	netif_stop_queue(net_dev);
-	uwb_radio_stop(&wlp->pal);
-	i1480u_rx_release(i1480u);
-	i1480u_tx_release(i1480u);
-	return 0;
-}
-
-/**
- *
- * Change the interface config--we probably don't have to do anything.
- */
-int i1480u_set_config(struct net_device *net_dev, struct ifmap *map)
-{
-	int result;
-	struct i1480u *i1480u = netdev_priv(net_dev);
-	BUG_ON(i1480u->wlp.rc == NULL);
-	result = 0;
-	return result;
-}
-
-/**
- * Change the MTU of the interface
- */
-int i1480u_change_mtu(struct net_device *net_dev, int mtu)
-{
-	static union {
-		struct wlp_tx_hdr tx;
-		struct wlp_rx_hdr rx;
-	} i1480u_all_hdrs;
-
-	if (mtu < ETH_HLEN)	/* We encap eth frames */
-		return -ERANGE;
-	if (mtu > 4000 - sizeof(i1480u_all_hdrs))
-		return -ERANGE;
-	net_dev->mtu = mtu;
-	return 0;
-}
-
-/**
- * Stop the network queue
- *
- * Enable WLP substack to stop network queue. We also set the flow control
- * threshold at this time to prevent the flow control from restarting the
- * queue.
- *
- * we are loosing the current threshold value here ... FIXME?
- */
-void i1480u_stop_queue(struct wlp *wlp)
-{
-	struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp);
-	struct net_device *net_dev = i1480u->net_dev;
-	i1480u->tx_inflight.threshold = 0;
-	netif_stop_queue(net_dev);
-}
-
-/**
- * Start the network queue
- *
- * Enable WLP substack to start network queue. Also re-enable the flow
- * control to manage the queue again.
- *
- * We re-enable the flow control by storing the default threshold in the
- * flow control threshold. This means that if the user modified the
- * threshold before the queue was stopped and restarted that information
- * will be lost. FIXME?
- */
-void i1480u_start_queue(struct wlp *wlp)
-{
-	struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp);
-	struct net_device *net_dev = i1480u->net_dev;
-	i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD;
-	netif_start_queue(net_dev);
-}
diff --git a/drivers/uwb/i1480/i1480u-wlp/rx.c b/drivers/uwb/i1480/i1480u-wlp/rx.c
deleted file mode 100644
index d4e51e108aa..00000000000
--- a/drivers/uwb/i1480/i1480u-wlp/rx.c
+++ /dev/null
@@ -1,474 +0,0 @@
-/*
- * WUSB Wire Adapter: WLP interface
- * Driver for the Linux Network stack.
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * i1480u's RX handling is simple. i1480u will send the received
- * network packets broken up in fragments; 1 to N fragments make a
- * packet, we assemble them together and deliver the packet with netif_rx().
- *
- * Beacuse each USB transfer is a *single* fragment (except when the
- * transfer contains a first fragment), each URB called thus
- * back contains one or two fragments. So we queue N URBs, each with its own
- * fragment buffer. When a URB is done, we process it (adding to the
- * current skb from the fragment buffer until complete). Once
- * processed, we requeue the URB. There is always a bunch of URBs
- * ready to take data, so the intergap should be minimal.
- *
- * An URB's transfer buffer is the data field of a socket buffer. This
- * reduces copying as data can be passed directly to network layer. If a
- * complete packet or 1st fragment is received the URB's transfer buffer is
- * taken away from it and used to send data to the network layer. In this
- * case a new transfer buffer is allocated to the URB before being requeued.
- * If a "NEXT" or "LAST" fragment is received, the fragment contents is
- * appended to the RX packet under construction and the transfer buffer
- * is reused. To be able to use this buffer to assemble complete packets
- * we set each buffer's size to that of the MAX ethernet packet that can
- * be received. There is thus room for improvement in memory usage.
- *
- * When the max tx fragment size increases, we should be able to read
- * data into the skbs directly with very simple code.
- *
- * ROADMAP:
- *
- *   ENTRY POINTS:
- *
- *     i1480u_rx_setup(): setup RX context [from i1480u_open()]
- *
- *     i1480u_rx_release(): release RX context [from i1480u_stop()]
- *
- *     i1480u_rx_cb(): called when the RX USB URB receives a
- *                     packet. It removes the header and pushes it up
- *                     the Linux netdev stack with netif_rx().
- *
- *       i1480u_rx_buffer()
- *         i1480u_drop() and i1480u_fix()
- *         i1480u_skb_deliver
- *
- */
-
-#include <linux/gfp.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include "i1480u-wlp.h"
-
-/*
- * Setup the RX context
- *
- * Each URB is provided with a transfer_buffer that is the data field
- * of a new socket buffer.
- */
-int i1480u_rx_setup(struct i1480u *i1480u)
-{
-	int result, cnt;
-	struct device *dev = &i1480u->usb_iface->dev;
-	struct net_device *net_dev = i1480u->net_dev;
-	struct usb_endpoint_descriptor *epd;
-	struct sk_buff *skb;
-
-	/* Alloc RX stuff */
-	i1480u->rx_skb = NULL;	/* not in process of receiving packet */
-	result = -ENOMEM;
-	epd = &i1480u->usb_iface->cur_altsetting->endpoint[1].desc;
-	for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) {
-		struct i1480u_rx_buf *rx_buf = &i1480u->rx_buf[cnt];
-		rx_buf->i1480u = i1480u;
-		skb = dev_alloc_skb(i1480u_MAX_RX_PKT_SIZE);
-		if (!skb) {
-			dev_err(dev,
-				"RX: cannot allocate RX buffer %d\n", cnt);
-			result = -ENOMEM;
-			goto error;
-		}
-		skb->dev = net_dev;
-		skb->ip_summed = CHECKSUM_NONE;
-		skb_reserve(skb, 2);
-		rx_buf->data = skb;
-		rx_buf->urb = usb_alloc_urb(0, GFP_KERNEL);
-		if (unlikely(rx_buf->urb == NULL)) {
-			dev_err(dev, "RX: cannot allocate URB %d\n", cnt);
-			result = -ENOMEM;
-			goto error;
-		}
-		usb_fill_bulk_urb(rx_buf->urb, i1480u->usb_dev,
-			  usb_rcvbulkpipe(i1480u->usb_dev, epd->bEndpointAddress),
-			  rx_buf->data->data, i1480u_MAX_RX_PKT_SIZE - 2,
-			  i1480u_rx_cb, rx_buf);
-		result = usb_submit_urb(rx_buf->urb, GFP_NOIO);
-		if (unlikely(result < 0)) {
-			dev_err(dev, "RX: cannot submit URB %d: %d\n",
-				cnt, result);
-			goto error;
-		}
-	}
-	return 0;
-
-error:
-	i1480u_rx_release(i1480u);
-	return result;
-}
-
-
-/* Release resources associated to the rx context */
-void i1480u_rx_release(struct i1480u *i1480u)
-{
-	int cnt;
-	for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) {
-		if (i1480u->rx_buf[cnt].data)
-			dev_kfree_skb(i1480u->rx_buf[cnt].data);
-		if (i1480u->rx_buf[cnt].urb) {
-			usb_kill_urb(i1480u->rx_buf[cnt].urb);
-			usb_free_urb(i1480u->rx_buf[cnt].urb);
-		}
-	}
-	if (i1480u->rx_skb != NULL)
-		dev_kfree_skb(i1480u->rx_skb);
-}
-
-static
-void i1480u_rx_unlink_urbs(struct i1480u *i1480u)
-{
-	int cnt;
-	for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) {
-		if (i1480u->rx_buf[cnt].urb)
-			usb_unlink_urb(i1480u->rx_buf[cnt].urb);
-	}
-}
-
-/* Fix an out-of-sequence packet */
-#define i1480u_fix(i1480u, msg...)			\
-do {							\
-	if (printk_ratelimit())				\
-		dev_err(&i1480u->usb_iface->dev, msg);	\
-	dev_kfree_skb_irq(i1480u->rx_skb);		\
-	i1480u->rx_skb = NULL;				\
-	i1480u->rx_untd_pkt_size = 0;			\
-} while (0)
-
-
-/* Drop an out-of-sequence packet */
-#define i1480u_drop(i1480u, msg...)			\
-do {							\
-	if (printk_ratelimit())				\
-		dev_err(&i1480u->usb_iface->dev, msg);	\
-	i1480u->net_dev->stats.rx_dropped++;			\
-} while (0)
-
-
-
-
-/* Finalizes setting up the SKB and delivers it
- *
- * We first pass the incoming frame to WLP substack for verification. It
- * may also be a WLP association frame in which case WLP will take over the
- * processing. If WLP does not take it over it will still verify it, if the
- * frame is invalid the skb will be freed by WLP and we will not continue
- * parsing.
- * */
-static
-void i1480u_skb_deliver(struct i1480u *i1480u)
-{
-	int should_parse;
-	struct net_device *net_dev = i1480u->net_dev;
-	struct device *dev = &i1480u->usb_iface->dev;
-
-	should_parse = wlp_receive_frame(dev, &i1480u->wlp, i1480u->rx_skb,
-					 &i1480u->rx_srcaddr);
-	if (!should_parse)
-		goto out;
-	i1480u->rx_skb->protocol = eth_type_trans(i1480u->rx_skb, net_dev);
-	net_dev->stats.rx_packets++;
-	net_dev->stats.rx_bytes += i1480u->rx_untd_pkt_size;
-
-	netif_rx(i1480u->rx_skb);		/* deliver */
-out:
-	i1480u->rx_skb = NULL;
-	i1480u->rx_untd_pkt_size = 0;
-}
-
-
-/*
- * Process a buffer of data received from the USB RX endpoint
- *
- * First fragment arrives with next or last fragment. All other fragments
- * arrive alone.
- *
- * /me hates long functions.
- */
-static
-void i1480u_rx_buffer(struct i1480u_rx_buf *rx_buf)
-{
-	unsigned pkt_completed = 0;	/* !0 when we got all pkt fragments */
-	size_t untd_hdr_size, untd_frg_size;
-	size_t i1480u_hdr_size;
-	struct wlp_rx_hdr *i1480u_hdr = NULL;
-
-	struct i1480u *i1480u = rx_buf->i1480u;
-	struct sk_buff *skb = rx_buf->data;
-	int size_left = rx_buf->urb->actual_length;
-	void *ptr = rx_buf->urb->transfer_buffer; /* also rx_buf->data->data */
-	struct untd_hdr *untd_hdr;
-
-	struct net_device *net_dev = i1480u->net_dev;
-	struct device *dev = &i1480u->usb_iface->dev;
-	struct sk_buff *new_skb;
-
-#if 0
-	dev_fnstart(dev,
-		    "(i1480u %p ptr %p size_left %zu)\n", i1480u, ptr, size_left);
-	dev_err(dev, "RX packet, %zu bytes\n", size_left);
-	dump_bytes(dev, ptr, size_left);
-#endif
-	i1480u_hdr_size = sizeof(struct wlp_rx_hdr);
-
-	while (size_left > 0) {
-		if (pkt_completed) {
-			i1480u_drop(i1480u, "RX: fragment follows completed"
-					 "packet in same buffer. Dropping\n");
-			break;
-		}
-		untd_hdr = ptr;
-		if (size_left < sizeof(*untd_hdr)) {	/*  Check the UNTD header */
-			i1480u_drop(i1480u, "RX: short UNTD header! Dropping\n");
-			goto out;
-		}
-		if (unlikely(untd_hdr_rx_tx(untd_hdr) == 0)) {	/* Paranoia: TX set? */
-			i1480u_drop(i1480u, "RX: TX bit set! Dropping\n");
-			goto out;
-		}
-		switch (untd_hdr_type(untd_hdr)) {	/* Check the UNTD header type */
-		case i1480u_PKT_FRAG_1ST: {
-			struct untd_hdr_1st *untd_hdr_1st = (void *) untd_hdr;
-			dev_dbg(dev, "1st fragment\n");
-			untd_hdr_size = sizeof(struct untd_hdr_1st);
-			if (i1480u->rx_skb != NULL)
-				i1480u_fix(i1480u, "RX: 1st fragment out of "
-					"sequence! Fixing\n");
-			if (size_left < untd_hdr_size + i1480u_hdr_size) {
-				i1480u_drop(i1480u, "RX: short 1st fragment! "
-					"Dropping\n");
-				goto out;
-			}
-			i1480u->rx_untd_pkt_size = le16_to_cpu(untd_hdr->len)
-						 - i1480u_hdr_size;
-			untd_frg_size = le16_to_cpu(untd_hdr_1st->fragment_len);
-			if (size_left < untd_hdr_size + untd_frg_size) {
-				i1480u_drop(i1480u,
-					    "RX: short payload! Dropping\n");
-				goto out;
-			}
-			i1480u->rx_skb = skb;
-			i1480u_hdr = (void *) untd_hdr_1st + untd_hdr_size;
-			i1480u->rx_srcaddr = i1480u_hdr->srcaddr;
-			skb_put(i1480u->rx_skb, untd_hdr_size + untd_frg_size);
-			skb_pull(i1480u->rx_skb, untd_hdr_size + i1480u_hdr_size);
-			stats_add_sample(&i1480u->lqe_stats, (s8) i1480u_hdr->LQI - 7);
-			stats_add_sample(&i1480u->rssi_stats, i1480u_hdr->RSSI + 18);
-			rx_buf->data = NULL; /* need to create new buffer */
-			break;
-		}
-		case i1480u_PKT_FRAG_NXT: {
-			dev_dbg(dev, "nxt fragment\n");
-			untd_hdr_size = sizeof(struct untd_hdr_rst);
-			if (i1480u->rx_skb == NULL) {
-				i1480u_drop(i1480u, "RX: next fragment out of "
-					    "sequence! Dropping\n");
-				goto out;
-			}
-			if (size_left < untd_hdr_size) {
-				i1480u_drop(i1480u, "RX: short NXT fragment! "
-					    "Dropping\n");
-				goto out;
-			}
-			untd_frg_size = le16_to_cpu(untd_hdr->len);
-			if (size_left < untd_hdr_size + untd_frg_size) {
-				i1480u_drop(i1480u,
-					    "RX: short payload! Dropping\n");
-				goto out;
-			}
-			memmove(skb_put(i1480u->rx_skb, untd_frg_size),
-					ptr + untd_hdr_size, untd_frg_size);
-			break;
-		}
-		case i1480u_PKT_FRAG_LST: {
-			dev_dbg(dev, "Lst fragment\n");
-			untd_hdr_size = sizeof(struct untd_hdr_rst);
-			if (i1480u->rx_skb == NULL) {
-				i1480u_drop(i1480u, "RX: last fragment out of "
-					    "sequence! Dropping\n");
-				goto out;
-			}
-			if (size_left < untd_hdr_size) {
-				i1480u_drop(i1480u, "RX: short LST fragment! "
-					    "Dropping\n");
-				goto out;
-			}
-			untd_frg_size = le16_to_cpu(untd_hdr->len);
-			if (size_left < untd_frg_size + untd_hdr_size) {
-				i1480u_drop(i1480u,
-					    "RX: short payload! Dropping\n");
-				goto out;
-			}
-			memmove(skb_put(i1480u->rx_skb, untd_frg_size),
-					ptr + untd_hdr_size, untd_frg_size);
-			pkt_completed = 1;
-			break;
-		}
-		case i1480u_PKT_FRAG_CMP: {
-			dev_dbg(dev, "cmp fragment\n");
-			untd_hdr_size = sizeof(struct untd_hdr_cmp);
-			if (i1480u->rx_skb != NULL)
-				i1480u_fix(i1480u, "RX: fix out-of-sequence CMP"
-					   " fragment!\n");
-			if (size_left < untd_hdr_size + i1480u_hdr_size) {
-				i1480u_drop(i1480u, "RX: short CMP fragment! "
-					    "Dropping\n");
-				goto out;
-			}
-			i1480u->rx_untd_pkt_size = le16_to_cpu(untd_hdr->len);
-			untd_frg_size = i1480u->rx_untd_pkt_size;
-			if (size_left < i1480u->rx_untd_pkt_size + untd_hdr_size) {
-				i1480u_drop(i1480u,
-					    "RX: short payload! Dropping\n");
-				goto out;
-			}
-			i1480u->rx_skb = skb;
-			i1480u_hdr = (void *) untd_hdr + untd_hdr_size;
-			i1480u->rx_srcaddr = i1480u_hdr->srcaddr;
-			stats_add_sample(&i1480u->lqe_stats, (s8) i1480u_hdr->LQI - 7);
-			stats_add_sample(&i1480u->rssi_stats, i1480u_hdr->RSSI + 18);
-			skb_put(i1480u->rx_skb, untd_hdr_size + i1480u->rx_untd_pkt_size);
-			skb_pull(i1480u->rx_skb, untd_hdr_size + i1480u_hdr_size);
-			rx_buf->data = NULL;	/* for hand off skb to network stack */
-			pkt_completed = 1;
-			i1480u->rx_untd_pkt_size -= i1480u_hdr_size; /* accurate stat */
-			break;
-		}
-		default:
-			i1480u_drop(i1480u, "RX: unknown packet type %u! "
-				    "Dropping\n", untd_hdr_type(untd_hdr));
-			goto out;
-		}
-		size_left -= untd_hdr_size + untd_frg_size;
-		if (size_left > 0)
-			ptr += untd_hdr_size + untd_frg_size;
-	}
-	if (pkt_completed)
-		i1480u_skb_deliver(i1480u);
-out:
-	/* recreate needed RX buffers*/
-	if (rx_buf->data == NULL) {
-		/* buffer is being used to receive packet, create new */
-		new_skb = dev_alloc_skb(i1480u_MAX_RX_PKT_SIZE);
-		if (!new_skb) {
-			if (printk_ratelimit())
-				dev_err(dev,
-				"RX: cannot allocate RX buffer\n");
-		} else {
-			new_skb->dev = net_dev;
-			new_skb->ip_summed = CHECKSUM_NONE;
-			skb_reserve(new_skb, 2);
-			rx_buf->data = new_skb;
-		}
-	}
-	return;
-}
-
-
-/*
- * Called when an RX URB has finished receiving or has found some kind
- * of error condition.
- *
- * LIMITATIONS:
- *
- *  - We read USB-transfers, each transfer contains a SINGLE fragment
- *    (can contain a complete packet, or a 1st, next, or last fragment
- *    of a packet).
- *    Looks like a transfer can contain more than one fragment (07/18/06)
- *
- *  - Each transfer buffer is the size of the maximum packet size (minus
- *    headroom), i1480u_MAX_PKT_SIZE - 2
- *
- *  - We always read the full USB-transfer, no partials.
- *
- *  - Each transfer is read directly into a skb. This skb will be used to
- *    send data to the upper layers if it is the first fragment or a complete
- *    packet. In the other cases the data will be copied from the skb to
- *    another skb that is being prepared for the upper layers from a prev
- *    first fragment.
- *
- * It is simply too much of a pain. Gosh, there should be a unified
- * SG infrastructure for *everything* [so that I could declare a SG
- * buffer, pass it to USB for receiving, append some space to it if
- * I wish, receive more until I have the whole chunk, adapt
- * pointers on each fragment to remove hardware headers and then
- * attach that to an skbuff and netif_rx()].
- */
-void i1480u_rx_cb(struct urb *urb)
-{
-	int result;
-	int do_parse_buffer = 1;
-	struct i1480u_rx_buf *rx_buf = urb->context;
-	struct i1480u *i1480u = rx_buf->i1480u;
-	struct device *dev = &i1480u->usb_iface->dev;
-	unsigned long flags;
-	u8 rx_buf_idx = rx_buf - i1480u->rx_buf;
-
-	switch (urb->status) {
-	case 0:
-		break;
-	case -ECONNRESET:	/* Not an error, but a controlled situation; */
-	case -ENOENT:		/* (we killed the URB)...so, no broadcast */
-	case -ESHUTDOWN:	/* going away! */
-		dev_err(dev, "RX URB[%u]: goind down %d\n",
-			rx_buf_idx, urb->status);
-		goto error;
-	default:
-		dev_err(dev, "RX URB[%u]: unknown status %d\n",
-			rx_buf_idx, urb->status);
-		if (edc_inc(&i1480u->rx_errors, EDC_MAX_ERRORS,
-					EDC_ERROR_TIMEFRAME)) {
-			dev_err(dev, "RX: max acceptable errors exceeded,"
-					" resetting device.\n");
-			i1480u_rx_unlink_urbs(i1480u);
-			wlp_reset_all(&i1480u->wlp);
-			goto error;
-		}
-		do_parse_buffer = 0;
-		break;
-	}
-	spin_lock_irqsave(&i1480u->lock, flags);
-	/* chew the data fragments, extract network packets */
-	if (do_parse_buffer) {
-		i1480u_rx_buffer(rx_buf);
-		if (rx_buf->data) {
-			rx_buf->urb->transfer_buffer = rx_buf->data->data;
-			result = usb_submit_urb(rx_buf->urb, GFP_ATOMIC);
-			if (result < 0) {
-				dev_err(dev, "RX URB[%u]: cannot submit %d\n",
-					rx_buf_idx, result);
-			}
-		}
-	}
-	spin_unlock_irqrestore(&i1480u->lock, flags);
-error:
-	return;
-}
-
diff --git a/drivers/uwb/i1480/i1480u-wlp/sysfs.c b/drivers/uwb/i1480/i1480u-wlp/sysfs.c
deleted file mode 100644
index 4ffaf546cc6..00000000000
--- a/drivers/uwb/i1480/i1480u-wlp/sysfs.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * WUSB Wire Adapter: WLP interface
- * Sysfs interfaces
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * FIXME: docs
- */
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/device.h>
-
-#include "i1480u-wlp.h"
-
-
-/**
- *
- * @dev: Class device from the net_device; assumed refcnted.
- *
- * Yes, I don't lock--we assume it is refcounted and I am getting a
- * single byte value that is kind of atomic to read.
- */
-ssize_t uwb_phy_rate_show(const struct wlp_options *options, char *buf)
-{
-	return sprintf(buf, "%u\n",
-		       wlp_tx_hdr_phy_rate(&options->def_tx_hdr));
-}
-EXPORT_SYMBOL_GPL(uwb_phy_rate_show);
-
-
-ssize_t uwb_phy_rate_store(struct wlp_options *options,
-			   const char *buf, size_t size)
-{
-	ssize_t result;
-	unsigned rate;
-
-	result = sscanf(buf, "%u\n", &rate);
-	if (result != 1) {
-		result = -EINVAL;
-		goto out;
-	}
-	result = -EINVAL;
-	if (rate >= UWB_PHY_RATE_INVALID)
-		goto out;
-	wlp_tx_hdr_set_phy_rate(&options->def_tx_hdr, rate);
-	result = 0;
-out:
-	return result < 0 ? result : size;
-}
-EXPORT_SYMBOL_GPL(uwb_phy_rate_store);
-
-
-ssize_t uwb_rts_cts_show(const struct wlp_options *options, char *buf)
-{
-	return sprintf(buf, "%u\n",
-		       wlp_tx_hdr_rts_cts(&options->def_tx_hdr));
-}
-EXPORT_SYMBOL_GPL(uwb_rts_cts_show);
-
-
-ssize_t uwb_rts_cts_store(struct wlp_options *options,
-			  const char *buf, size_t size)
-{
-	ssize_t result;
-	unsigned value;
-
-	result = sscanf(buf, "%u\n", &value);
-	if (result != 1) {
-		result = -EINVAL;
-		goto out;
-	}
-	result = -EINVAL;
-	wlp_tx_hdr_set_rts_cts(&options->def_tx_hdr, !!value);
-	result = 0;
-out:
-	return result < 0 ? result : size;
-}
-EXPORT_SYMBOL_GPL(uwb_rts_cts_store);
-
-
-ssize_t uwb_ack_policy_show(const struct wlp_options *options, char *buf)
-{
-	return sprintf(buf, "%u\n",
-		       wlp_tx_hdr_ack_policy(&options->def_tx_hdr));
-}
-EXPORT_SYMBOL_GPL(uwb_ack_policy_show);
-
-
-ssize_t uwb_ack_policy_store(struct wlp_options *options,
-			     const char *buf, size_t size)
-{
-	ssize_t result;
-	unsigned value;
-
-	result = sscanf(buf, "%u\n", &value);
-	if (result != 1 || value > UWB_ACK_B_REQ) {
-		result = -EINVAL;
-		goto out;
-	}
-	wlp_tx_hdr_set_ack_policy(&options->def_tx_hdr, value);
-	result = 0;
-out:
-	return result < 0 ? result : size;
-}
-EXPORT_SYMBOL_GPL(uwb_ack_policy_store);
-
-
-/**
- * Show the PCA base priority.
- *
- * We can access without locking, as the value is (for now) orthogonal
- * to other values.
- */
-ssize_t uwb_pca_base_priority_show(const struct wlp_options *options,
-				   char *buf)
-{
-	return sprintf(buf, "%u\n",
-		       options->pca_base_priority);
-}
-EXPORT_SYMBOL_GPL(uwb_pca_base_priority_show);
-
-
-/**
- * Set the PCA base priority.
- *
- * We can access without locking, as the value is (for now) orthogonal
- * to other values.
- */
-ssize_t uwb_pca_base_priority_store(struct wlp_options *options,
-				    const char *buf, size_t size)
-{
-	ssize_t result = -EINVAL;
-	u8 pca_base_priority;
-
-	result = sscanf(buf, "%hhu\n", &pca_base_priority);
-	if (result != 1) {
-		result = -EINVAL;
-		goto out;
-	}
-	result = -EINVAL;
-	if (pca_base_priority >= 8)
-		goto out;
-	options->pca_base_priority = pca_base_priority;
-	/* Update TX header if we are currently using PCA. */
-	if (result >= 0 && (wlp_tx_hdr_delivery_id_type(&options->def_tx_hdr) & WLP_DRP) == 0)
-		wlp_tx_hdr_set_delivery_id_type(&options->def_tx_hdr, options->pca_base_priority);
-	result = 0;
-out:
-	return result < 0 ? result : size;
-}
-EXPORT_SYMBOL_GPL(uwb_pca_base_priority_store);
-
-/**
- * Show current inflight values
- *
- * Will print the current MAX and THRESHOLD values for the basic flow
- * control. In addition it will report how many times the TX queue needed
- * to be restarted since the last time this query was made.
- */
-static ssize_t wlp_tx_inflight_show(struct i1480u_tx_inflight *inflight,
-				    char *buf)
-{
-	ssize_t result;
-	unsigned long sec_elapsed = (jiffies - inflight->restart_ts)/HZ;
-	unsigned long restart_count = atomic_read(&inflight->restart_count);
-
-	result = scnprintf(buf, PAGE_SIZE, "%lu %lu %d %lu %lu %lu\n"
-			   "#read: threshold max inflight_count restarts "
-			   "seconds restarts/sec\n"
-			   "#write: threshold max\n",
-			   inflight->threshold, inflight->max,
-			   atomic_read(&inflight->count),
-			   restart_count, sec_elapsed,
-			   sec_elapsed == 0 ? 0 : restart_count/sec_elapsed);
-	inflight->restart_ts = jiffies;
-	atomic_set(&inflight->restart_count, 0);
-	return result;
-}
-
-static
-ssize_t wlp_tx_inflight_store(struct i1480u_tx_inflight *inflight,
-				const char *buf, size_t size)
-{
-	unsigned long in_threshold, in_max;
-	ssize_t result;
-	result = sscanf(buf, "%lu %lu", &in_threshold, &in_max);
-	if (result != 2)
-		return -EINVAL;
-	if (in_max <= in_threshold)
-		return -EINVAL;
-	inflight->max = in_max;
-	inflight->threshold = in_threshold;
-	return size;
-}
-/*
- * Glue (or function adaptors) for accesing info on sysfs
- *
- * [we need this indirection because the PCI driver does almost the
- * same]
- *
- * Linux 2.6.21 changed how 'struct netdevice' does attributes (from
- * having a 'struct class_dev' to having a 'struct device'). That is
- * quite of a pain.
- *
- * So we try to abstract that here. i1480u_SHOW() and i1480u_STORE()
- * create adaptors for extracting the 'struct i1480u' from a 'struct
- * dev' and calling a function for doing a sysfs operation (as we have
- * them factorized already). i1480u_ATTR creates the attribute file
- * (CLASS_DEVICE_ATTR or DEVICE_ATTR) and i1480u_ATTR_NAME produces a
- * class_device_attr_NAME or device_attr_NAME (for group registration).
- */
-
-#define i1480u_SHOW(name, fn, param)				\
-static ssize_t i1480u_show_##name(struct device *dev,		\
-				  struct device_attribute *attr,\
-				  char *buf)			\
-{								\
-	struct i1480u *i1480u = netdev_priv(to_net_dev(dev));	\
-	return fn(&i1480u->param, buf);				\
-}
-
-#define i1480u_STORE(name, fn, param)				\
-static ssize_t i1480u_store_##name(struct device *dev,		\
-				   struct device_attribute *attr,\
-				   const char *buf, size_t size)\
-{								\
-	struct i1480u *i1480u = netdev_priv(to_net_dev(dev));	\
-	return fn(&i1480u->param, buf, size);			\
-}
-
-#define i1480u_ATTR(name, perm) static DEVICE_ATTR(name, perm,  \
-					     i1480u_show_##name,\
-					     i1480u_store_##name)
-
-#define i1480u_ATTR_SHOW(name) static DEVICE_ATTR(name,		\
-					S_IRUGO,		\
-					i1480u_show_##name, NULL)
-
-#define i1480u_ATTR_NAME(a) (dev_attr_##a)
-
-
-/*
- * Sysfs adaptors
- */
-i1480u_SHOW(uwb_phy_rate, uwb_phy_rate_show, options);
-i1480u_STORE(uwb_phy_rate, uwb_phy_rate_store, options);
-i1480u_ATTR(uwb_phy_rate, S_IRUGO | S_IWUSR);
-
-i1480u_SHOW(uwb_rts_cts, uwb_rts_cts_show, options);
-i1480u_STORE(uwb_rts_cts, uwb_rts_cts_store, options);
-i1480u_ATTR(uwb_rts_cts, S_IRUGO | S_IWUSR);
-
-i1480u_SHOW(uwb_ack_policy, uwb_ack_policy_show, options);
-i1480u_STORE(uwb_ack_policy, uwb_ack_policy_store, options);
-i1480u_ATTR(uwb_ack_policy, S_IRUGO | S_IWUSR);
-
-i1480u_SHOW(uwb_pca_base_priority, uwb_pca_base_priority_show, options);
-i1480u_STORE(uwb_pca_base_priority, uwb_pca_base_priority_store, options);
-i1480u_ATTR(uwb_pca_base_priority, S_IRUGO | S_IWUSR);
-
-i1480u_SHOW(wlp_eda, wlp_eda_show, wlp);
-i1480u_STORE(wlp_eda, wlp_eda_store, wlp);
-i1480u_ATTR(wlp_eda, S_IRUGO | S_IWUSR);
-
-i1480u_SHOW(wlp_uuid, wlp_uuid_show, wlp);
-i1480u_STORE(wlp_uuid, wlp_uuid_store, wlp);
-i1480u_ATTR(wlp_uuid, S_IRUGO | S_IWUSR);
-
-i1480u_SHOW(wlp_dev_name, wlp_dev_name_show, wlp);
-i1480u_STORE(wlp_dev_name, wlp_dev_name_store, wlp);
-i1480u_ATTR(wlp_dev_name, S_IRUGO | S_IWUSR);
-
-i1480u_SHOW(wlp_dev_manufacturer, wlp_dev_manufacturer_show, wlp);
-i1480u_STORE(wlp_dev_manufacturer, wlp_dev_manufacturer_store, wlp);
-i1480u_ATTR(wlp_dev_manufacturer, S_IRUGO | S_IWUSR);
-
-i1480u_SHOW(wlp_dev_model_name, wlp_dev_model_name_show, wlp);
-i1480u_STORE(wlp_dev_model_name, wlp_dev_model_name_store, wlp);
-i1480u_ATTR(wlp_dev_model_name, S_IRUGO | S_IWUSR);
-
-i1480u_SHOW(wlp_dev_model_nr, wlp_dev_model_nr_show, wlp);
-i1480u_STORE(wlp_dev_model_nr, wlp_dev_model_nr_store, wlp);
-i1480u_ATTR(wlp_dev_model_nr, S_IRUGO | S_IWUSR);
-
-i1480u_SHOW(wlp_dev_serial, wlp_dev_serial_show, wlp);
-i1480u_STORE(wlp_dev_serial, wlp_dev_serial_store, wlp);
-i1480u_ATTR(wlp_dev_serial, S_IRUGO | S_IWUSR);
-
-i1480u_SHOW(wlp_dev_prim_category, wlp_dev_prim_category_show, wlp);
-i1480u_STORE(wlp_dev_prim_category, wlp_dev_prim_category_store, wlp);
-i1480u_ATTR(wlp_dev_prim_category, S_IRUGO | S_IWUSR);
-
-i1480u_SHOW(wlp_dev_prim_OUI, wlp_dev_prim_OUI_show, wlp);
-i1480u_STORE(wlp_dev_prim_OUI, wlp_dev_prim_OUI_store, wlp);
-i1480u_ATTR(wlp_dev_prim_OUI, S_IRUGO | S_IWUSR);
-
-i1480u_SHOW(wlp_dev_prim_OUI_sub, wlp_dev_prim_OUI_sub_show, wlp);
-i1480u_STORE(wlp_dev_prim_OUI_sub, wlp_dev_prim_OUI_sub_store, wlp);
-i1480u_ATTR(wlp_dev_prim_OUI_sub, S_IRUGO | S_IWUSR);
-
-i1480u_SHOW(wlp_dev_prim_subcat, wlp_dev_prim_subcat_show, wlp);
-i1480u_STORE(wlp_dev_prim_subcat, wlp_dev_prim_subcat_store, wlp);
-i1480u_ATTR(wlp_dev_prim_subcat, S_IRUGO | S_IWUSR);
-
-i1480u_SHOW(wlp_neighborhood, wlp_neighborhood_show, wlp);
-i1480u_ATTR_SHOW(wlp_neighborhood);
-
-i1480u_SHOW(wss_activate, wlp_wss_activate_show, wlp.wss);
-i1480u_STORE(wss_activate, wlp_wss_activate_store, wlp.wss);
-i1480u_ATTR(wss_activate, S_IRUGO | S_IWUSR);
-
-/*
- * Show the (min, max, avg) Line Quality Estimate (LQE, in dB) as over
- * the last 256 received WLP frames (ECMA-368 13.3).
- *
- * [the -7dB that have to be substracted from the LQI to make the LQE
- * are already taken into account].
- */
-i1480u_SHOW(wlp_lqe, stats_show, lqe_stats);
-i1480u_STORE(wlp_lqe, stats_store, lqe_stats);
-i1480u_ATTR(wlp_lqe, S_IRUGO | S_IWUSR);
-
-/*
- * Show the Receive Signal Strength Indicator averaged over all the
- * received WLP frames (ECMA-368 13.3). Still is not clear what
- * this value is, but is kind of a percentage of the signal strength
- * at the antenna.
- */
-i1480u_SHOW(wlp_rssi, stats_show, rssi_stats);
-i1480u_STORE(wlp_rssi, stats_store, rssi_stats);
-i1480u_ATTR(wlp_rssi, S_IRUGO | S_IWUSR);
-
-/**
- * We maintain a basic flow control counter. "count" how many TX URBs are
- * outstanding. Only allow "max"
- * TX URBs to be outstanding. If this value is reached the queue will be
- * stopped. The queue will be restarted when there are
- * "threshold" URBs outstanding.
- */
-i1480u_SHOW(wlp_tx_inflight, wlp_tx_inflight_show, tx_inflight);
-i1480u_STORE(wlp_tx_inflight, wlp_tx_inflight_store, tx_inflight);
-i1480u_ATTR(wlp_tx_inflight, S_IRUGO | S_IWUSR);
-
-static struct attribute *i1480u_attrs[] = {
-	&i1480u_ATTR_NAME(uwb_phy_rate).attr,
-	&i1480u_ATTR_NAME(uwb_rts_cts).attr,
-	&i1480u_ATTR_NAME(uwb_ack_policy).attr,
-	&i1480u_ATTR_NAME(uwb_pca_base_priority).attr,
-	&i1480u_ATTR_NAME(wlp_lqe).attr,
-	&i1480u_ATTR_NAME(wlp_rssi).attr,
-	&i1480u_ATTR_NAME(wlp_eda).attr,
-	&i1480u_ATTR_NAME(wlp_uuid).attr,
-	&i1480u_ATTR_NAME(wlp_dev_name).attr,
-	&i1480u_ATTR_NAME(wlp_dev_manufacturer).attr,
-	&i1480u_ATTR_NAME(wlp_dev_model_name).attr,
-	&i1480u_ATTR_NAME(wlp_dev_model_nr).attr,
-	&i1480u_ATTR_NAME(wlp_dev_serial).attr,
-	&i1480u_ATTR_NAME(wlp_dev_prim_category).attr,
-	&i1480u_ATTR_NAME(wlp_dev_prim_OUI).attr,
-	&i1480u_ATTR_NAME(wlp_dev_prim_OUI_sub).attr,
-	&i1480u_ATTR_NAME(wlp_dev_prim_subcat).attr,
-	&i1480u_ATTR_NAME(wlp_neighborhood).attr,
-	&i1480u_ATTR_NAME(wss_activate).attr,
-	&i1480u_ATTR_NAME(wlp_tx_inflight).attr,
-	NULL,
-};
-
-static struct attribute_group i1480u_attr_group = {
-	.name = NULL,	/* we want them in the same directory */
-	.attrs = i1480u_attrs,
-};
-
-int i1480u_sysfs_setup(struct i1480u *i1480u)
-{
-	int result;
-	struct device *dev = &i1480u->usb_iface->dev;
-	result = sysfs_create_group(&i1480u->net_dev->dev.kobj,
-				    &i1480u_attr_group);
-	if (result < 0)
-		dev_err(dev, "cannot initialize sysfs attributes: %d\n",
-			result);
-	return result;
-}
-
-
-void i1480u_sysfs_release(struct i1480u *i1480u)
-{
-	sysfs_remove_group(&i1480u->net_dev->dev.kobj,
-			   &i1480u_attr_group);
-}
diff --git a/drivers/uwb/i1480/i1480u-wlp/tx.c b/drivers/uwb/i1480/i1480u-wlp/tx.c
deleted file mode 100644
index 3c117a36456..00000000000
--- a/drivers/uwb/i1480/i1480u-wlp/tx.c
+++ /dev/null
@@ -1,584 +0,0 @@
-/*
- * WUSB Wire Adapter: WLP interface
- * Deal with TX (massaging data to transmit, handling it)
- *
- * Copyright (C) 2005-2006 Intel Corporation
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- *
- *
- * Transmission engine. Get an skb, create from that a WLP transmit
- * context, add a WLP TX header (which we keep prefilled in the
- * device's instance), fill out the target-specific fields and
- * fire it.
- *
- * ROADMAP:
- *
- *   Entry points:
- *
- *     i1480u_tx_release(): called by i1480u_disconnect() to release
- *                          pending tx contexts.
- *
- *     i1480u_tx_cb(): callback for TX contexts (USB URBs)
- *       i1480u_tx_destroy():
- *
- *     i1480u_tx_timeout(): called for timeout handling from the
- *                          network stack.
- *
- *     i1480u_hard_start_xmit(): called for transmitting an skb from
- *                               the network stack. Will interact with WLP
- *                               substack to verify and prepare frame.
- *       i1480u_xmit_frame(): actual transmission on hardware
- *
- *         i1480u_tx_create()	    Creates TX context
- *            i1480u_tx_create_1()    For packets in 1 fragment
- *            i1480u_tx_create_n()    For packets in >1 fragments
- *
- * TODO:
- *
- * - FIXME: rewrite using usb_sg_*(), add asynch support to
- *          usb_sg_*(). It might not make too much sense as most of
- *          the times the MTU will be smaller than one page...
- */
-
-#include <linux/slab.h>
-#include "i1480u-wlp.h"
-
-enum {
-	/* This is only for Next and Last TX packets */
-	i1480u_MAX_PL_SIZE = i1480u_MAX_FRG_SIZE
-		- sizeof(struct untd_hdr_rst),
-};
-
-/* Free resources allocated to a i1480u tx context. */
-static
-void i1480u_tx_free(struct i1480u_tx *wtx)
-{
-	kfree(wtx->buf);
-	if (wtx->skb)
-		dev_kfree_skb_irq(wtx->skb);
-	usb_free_urb(wtx->urb);
-	kfree(wtx);
-}
-
-static
-void i1480u_tx_destroy(struct i1480u *i1480u, struct i1480u_tx *wtx)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&i1480u->tx_list_lock, flags);	/* not active any more */
-	list_del(&wtx->list_node);
-	i1480u_tx_free(wtx);
-	spin_unlock_irqrestore(&i1480u->tx_list_lock, flags);
-}
-
-static
-void i1480u_tx_unlink_urbs(struct i1480u *i1480u)
-{
-	unsigned long flags;
-	struct i1480u_tx *wtx, *next;
-
-	spin_lock_irqsave(&i1480u->tx_list_lock, flags);
-	list_for_each_entry_safe(wtx, next, &i1480u->tx_list, list_node) {
-		usb_unlink_urb(wtx->urb);
-	}
-	spin_unlock_irqrestore(&i1480u->tx_list_lock, flags);
-}
-
-
-/*
- * Callback for a completed tx USB URB.
- *
- * TODO:
- *
- * - FIXME: recover errors more gracefully
- * - FIXME: handle NAKs (I dont think they come here) for flow ctl
- */
-static
-void i1480u_tx_cb(struct urb *urb)
-{
-	struct i1480u_tx *wtx = urb->context;
-	struct i1480u *i1480u = wtx->i1480u;
-	struct net_device *net_dev = i1480u->net_dev;
-	struct device *dev = &i1480u->usb_iface->dev;
-	unsigned long flags;
-
-	switch (urb->status) {
-	case 0:
-		spin_lock_irqsave(&i1480u->lock, flags);
-		net_dev->stats.tx_packets++;
-		net_dev->stats.tx_bytes += urb->actual_length;
-		spin_unlock_irqrestore(&i1480u->lock, flags);
-		break;
-	case -ECONNRESET:	/* Not an error, but a controlled situation; */
-	case -ENOENT:		/* (we killed the URB)...so, no broadcast */
-		dev_dbg(dev, "notif endp: reset/noent %d\n", urb->status);
-		netif_stop_queue(net_dev);
-		break;
-	case -ESHUTDOWN:	/* going away! */
-		dev_dbg(dev, "notif endp: down %d\n", urb->status);
-		netif_stop_queue(net_dev);
-		break;
-	default:
-		dev_err(dev, "TX: unknown URB status %d\n", urb->status);
-		if (edc_inc(&i1480u->tx_errors, EDC_MAX_ERRORS,
-					EDC_ERROR_TIMEFRAME)) {
-			dev_err(dev, "TX: max acceptable errors exceeded."
-					"Reset device.\n");
-			netif_stop_queue(net_dev);
-			i1480u_tx_unlink_urbs(i1480u);
-			wlp_reset_all(&i1480u->wlp);
-		}
-		break;
-	}
-	i1480u_tx_destroy(i1480u, wtx);
-	if (atomic_dec_return(&i1480u->tx_inflight.count)
-	    <= i1480u->tx_inflight.threshold
-	    && netif_queue_stopped(net_dev)
-	    && i1480u->tx_inflight.threshold != 0) {
-		netif_start_queue(net_dev);
-		atomic_inc(&i1480u->tx_inflight.restart_count);
-	}
-	return;
-}
-
-
-/*
- * Given a buffer that doesn't fit in a single fragment, create an
- * scatter/gather structure for delivery to the USB pipe.
- *
- * Implements functionality of i1480u_tx_create().
- *
- * @wtx:	tx descriptor
- * @skb:	skb to send
- * @gfp_mask:	gfp allocation mask
- * @returns:    Pointer to @wtx if ok, NULL on error.
- *
- * Sorry, TOO LONG a function, but breaking it up is kind of hard
- *
- * This will break the buffer in chunks smaller than
- * i1480u_MAX_FRG_SIZE (including the header) and add proper headers
- * to each:
- *
- *   1st header           \
- *   i1480 tx header      |  fragment 1
- *   fragment data        /
- *   nxt header           \  fragment 2
- *   fragment data        /
- *   ..
- *   ..
- *   last header          \  fragment 3
- *   last fragment data   /
- *
- * This does not fill the i1480 TX header, it is left up to the
- * caller to do that; you can get it from @wtx->wlp_tx_hdr.
- *
- * This function consumes the skb unless there is an error.
- */
-static
-int i1480u_tx_create_n(struct i1480u_tx *wtx, struct sk_buff *skb,
-		       gfp_t gfp_mask)
-{
-	int result;
-	void *pl;
-	size_t pl_size;
-
-	void *pl_itr, *buf_itr;
-	size_t pl_size_left, frgs, pl_size_1st, frg_pl_size = 0;
-	struct untd_hdr_1st *untd_hdr_1st;
-	struct wlp_tx_hdr *wlp_tx_hdr;
-	struct untd_hdr_rst *untd_hdr_rst;
-
-	wtx->skb = NULL;
-	pl = skb->data;
-	pl_itr = pl;
-	pl_size = skb->len;
-	pl_size_left = pl_size;	/* payload size */
-	/* First fragment; fits as much as i1480u_MAX_FRG_SIZE minus
-	 * the headers */
-	pl_size_1st = i1480u_MAX_FRG_SIZE
-		- sizeof(struct untd_hdr_1st) - sizeof(struct wlp_tx_hdr);
-	BUG_ON(pl_size_1st > pl_size);
-	pl_size_left -= pl_size_1st;
-	/* The rest have an smaller header (no i1480 TX header). We
-	 * need to break up the payload in blocks smaller than
-	 * i1480u_MAX_PL_SIZE (payload excluding header). */
-	frgs = (pl_size_left + i1480u_MAX_PL_SIZE - 1) / i1480u_MAX_PL_SIZE;
-	/* Allocate space for the new buffer. In this new buffer we'll
-	 * place the headers followed by the data fragment, headers,
-	 * data fragments, etc..
-	 */
-	result = -ENOMEM;
-	wtx->buf_size = sizeof(*untd_hdr_1st)
-		+ sizeof(*wlp_tx_hdr)
-		+ frgs * sizeof(*untd_hdr_rst)
-		+ pl_size;
-	wtx->buf = kmalloc(wtx->buf_size, gfp_mask);
-	if (wtx->buf == NULL)
-		goto error_buf_alloc;
-
-	buf_itr = wtx->buf;		/* We got the space, let's fill it up */
-	/* Fill 1st fragment */
-	untd_hdr_1st = buf_itr;
-	buf_itr += sizeof(*untd_hdr_1st);
-	untd_hdr_set_type(&untd_hdr_1st->hdr, i1480u_PKT_FRAG_1ST);
-	untd_hdr_set_rx_tx(&untd_hdr_1st->hdr, 0);
-	untd_hdr_1st->hdr.len = cpu_to_le16(pl_size + sizeof(*wlp_tx_hdr));
-	untd_hdr_1st->fragment_len =
-		cpu_to_le16(pl_size_1st + sizeof(*wlp_tx_hdr));
-	memset(untd_hdr_1st->padding, 0, sizeof(untd_hdr_1st->padding));
-	/* Set up i1480 header info */
-	wlp_tx_hdr = wtx->wlp_tx_hdr = buf_itr;
-	buf_itr += sizeof(*wlp_tx_hdr);
-	/* Copy the first fragment */
-	memcpy(buf_itr, pl_itr, pl_size_1st);
-	pl_itr += pl_size_1st;
-	buf_itr += pl_size_1st;
-
-	/* Now do each remaining fragment */
-	result = -EINVAL;
-	while (pl_size_left > 0) {
-		if (buf_itr + sizeof(*untd_hdr_rst) - wtx->buf
-		    > wtx->buf_size) {
-			printk(KERN_ERR "BUG: no space for header\n");
-			goto error_bug;
-		}
-		untd_hdr_rst = buf_itr;
-		buf_itr += sizeof(*untd_hdr_rst);
-		if (pl_size_left > i1480u_MAX_PL_SIZE) {
-			frg_pl_size = i1480u_MAX_PL_SIZE;
-			untd_hdr_set_type(&untd_hdr_rst->hdr, i1480u_PKT_FRAG_NXT);
-		} else {
-			frg_pl_size = pl_size_left;
-			untd_hdr_set_type(&untd_hdr_rst->hdr, i1480u_PKT_FRAG_LST);
-		}
-		untd_hdr_set_rx_tx(&untd_hdr_rst->hdr, 0);
-		untd_hdr_rst->hdr.len = cpu_to_le16(frg_pl_size);
-		untd_hdr_rst->padding = 0;
-		if (buf_itr + frg_pl_size - wtx->buf
-		    > wtx->buf_size) {
-			printk(KERN_ERR "BUG: no space for payload\n");
-			goto error_bug;
-		}
-		memcpy(buf_itr, pl_itr, frg_pl_size);
-		buf_itr += frg_pl_size;
-		pl_itr += frg_pl_size;
-		pl_size_left -= frg_pl_size;
-	}
-	dev_kfree_skb_irq(skb);
-	return 0;
-
-error_bug:
-	printk(KERN_ERR
-	       "BUG: skb %u bytes\n"
-	       "BUG: frg_pl_size %zd i1480u_MAX_FRG_SIZE %u\n"
-	       "BUG: buf_itr %zu buf_size %zu pl_size_left %zu\n",
-	       skb->len,
-	       frg_pl_size, i1480u_MAX_FRG_SIZE,
-	       buf_itr - wtx->buf, wtx->buf_size, pl_size_left);
-
-	kfree(wtx->buf);
-error_buf_alloc:
-	return result;
-}
-
-
-/*
- * Given a buffer that fits in a single fragment, fill out a @wtx
- * struct for transmitting it down the USB pipe.
- *
- * Uses the fact that we have space reserved in front of the skbuff
- * for hardware headers :]
- *
- * This does not fill the i1480 TX header, it is left up to the
- * caller to do that; you can get it from @wtx->wlp_tx_hdr.
- *
- * @pl:		pointer to payload data
- * @pl_size:    size of the payuload
- *
- * This function does not consume the @skb.
- */
-static
-int i1480u_tx_create_1(struct i1480u_tx *wtx, struct sk_buff *skb,
-		       gfp_t gfp_mask)
-{
-	struct untd_hdr_cmp *untd_hdr_cmp;
-	struct wlp_tx_hdr *wlp_tx_hdr;
-
-	wtx->buf = NULL;
-	wtx->skb = skb;
-	BUG_ON(skb_headroom(skb) < sizeof(*wlp_tx_hdr));
-	wlp_tx_hdr = (void *) __skb_push(skb, sizeof(*wlp_tx_hdr));
-	wtx->wlp_tx_hdr = wlp_tx_hdr;
-	BUG_ON(skb_headroom(skb) < sizeof(*untd_hdr_cmp));
-	untd_hdr_cmp = (void *) __skb_push(skb, sizeof(*untd_hdr_cmp));
-
-	untd_hdr_set_type(&untd_hdr_cmp->hdr, i1480u_PKT_FRAG_CMP);
-	untd_hdr_set_rx_tx(&untd_hdr_cmp->hdr, 0);
-	untd_hdr_cmp->hdr.len = cpu_to_le16(skb->len - sizeof(*untd_hdr_cmp));
-	untd_hdr_cmp->padding = 0;
-	return 0;
-}
-
-
-/*
- * Given a skb to transmit, massage it to become palatable for the TX pipe
- *
- * This will break the buffer in chunks smaller than
- * i1480u_MAX_FRG_SIZE and add proper headers to each.
- *
- *   1st header           \
- *   i1480 tx header      |  fragment 1
- *   fragment data        /
- *   nxt header           \  fragment 2
- *   fragment data        /
- *   ..
- *   ..
- *   last header          \  fragment 3
- *   last fragment data   /
- *
- * Each fragment will be always smaller or equal to i1480u_MAX_FRG_SIZE.
- *
- * If the first fragment is smaller than i1480u_MAX_FRG_SIZE, then the
- * following is composed:
- *
- *   complete header      \
- *   i1480 tx header      | single fragment
- *   packet data          /
- *
- * We were going to use s/g support, but because the interface is
- * synch and at the end there is plenty of overhead to do it, it
- * didn't seem that worth for data that is going to be smaller than
- * one page.
- */
-static
-struct i1480u_tx *i1480u_tx_create(struct i1480u *i1480u,
-				   struct sk_buff *skb, gfp_t gfp_mask)
-{
-	int result;
-	struct usb_endpoint_descriptor *epd;
-	int usb_pipe;
-	unsigned long flags;
-
-	struct i1480u_tx *wtx;
-	const size_t pl_max_size =
-		i1480u_MAX_FRG_SIZE - sizeof(struct untd_hdr_cmp)
-		- sizeof(struct wlp_tx_hdr);
-
-	wtx = kmalloc(sizeof(*wtx), gfp_mask);
-	if (wtx == NULL)
-		goto error_wtx_alloc;
-	wtx->urb = usb_alloc_urb(0, gfp_mask);
-	if (wtx->urb == NULL)
-		goto error_urb_alloc;
-	epd = &i1480u->usb_iface->cur_altsetting->endpoint[2].desc;
-	usb_pipe = usb_sndbulkpipe(i1480u->usb_dev, epd->bEndpointAddress);
-	/* Fits in a single complete packet or need to split? */
-	if (skb->len > pl_max_size) {
-		result = i1480u_tx_create_n(wtx, skb, gfp_mask);
-		if (result < 0)
-			goto error_create;
-		usb_fill_bulk_urb(wtx->urb, i1480u->usb_dev, usb_pipe,
-				  wtx->buf, wtx->buf_size, i1480u_tx_cb, wtx);
-	} else {
-		result = i1480u_tx_create_1(wtx, skb, gfp_mask);
-		if (result < 0)
-			goto error_create;
-		usb_fill_bulk_urb(wtx->urb, i1480u->usb_dev, usb_pipe,
-				  skb->data, skb->len, i1480u_tx_cb, wtx);
-	}
-	spin_lock_irqsave(&i1480u->tx_list_lock, flags);
-	list_add(&wtx->list_node, &i1480u->tx_list);
-	spin_unlock_irqrestore(&i1480u->tx_list_lock, flags);
-	return wtx;
-
-error_create:
-	kfree(wtx->urb);
-error_urb_alloc:
-	kfree(wtx);
-error_wtx_alloc:
-	return NULL;
-}
-
-/*
- * Actual fragmentation and transmission of frame
- *
- * @wlp:  WLP substack data structure
- * @skb:  To be transmitted
- * @dst:  Device address of destination
- * @returns: 0 on success, <0 on failure
- *
- * This function can also be called directly (not just from
- * hard_start_xmit), so we also check here if the interface is up before
- * taking sending anything.
- */
-int i1480u_xmit_frame(struct wlp *wlp, struct sk_buff *skb,
-		      struct uwb_dev_addr *dst)
-{
-	int result = -ENXIO;
-	struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp);
-	struct device *dev = &i1480u->usb_iface->dev;
-	struct net_device *net_dev = i1480u->net_dev;
-	struct i1480u_tx *wtx;
-	struct wlp_tx_hdr *wlp_tx_hdr;
-	static unsigned char dev_bcast[2] = { 0xff, 0xff };
-
-	BUG_ON(i1480u->wlp.rc == NULL);
-	if ((net_dev->flags & IFF_UP) == 0)
-		goto out;
-	result = -EBUSY;
-	if (atomic_read(&i1480u->tx_inflight.count) >= i1480u->tx_inflight.max) {
-		netif_stop_queue(net_dev);
-		goto error_max_inflight;
-	}
-	result = -ENOMEM;
-	wtx = i1480u_tx_create(i1480u, skb, GFP_ATOMIC);
-	if (unlikely(wtx == NULL)) {
-		if (printk_ratelimit())
-			dev_err(dev, "TX: no memory for WLP TX URB,"
-				"dropping packet (in flight %d)\n",
-				atomic_read(&i1480u->tx_inflight.count));
-		netif_stop_queue(net_dev);
-		goto error_wtx_alloc;
-	}
-	wtx->i1480u = i1480u;
-	/* Fill out the i1480 header; @i1480u->def_tx_hdr read without
-	 * locking. We do so because they are kind of orthogonal to
-	 * each other (and thus not changed in an atomic batch).
-	 * The ETH header is right after the WLP TX header. */
-	wlp_tx_hdr = wtx->wlp_tx_hdr;
-	*wlp_tx_hdr = i1480u->options.def_tx_hdr;
-	wlp_tx_hdr->dstaddr = *dst;
-	if (!memcmp(&wlp_tx_hdr->dstaddr, dev_bcast, sizeof(dev_bcast))
-	    && (wlp_tx_hdr_delivery_id_type(wlp_tx_hdr) & WLP_DRP)) {
-		/*Broadcast message directed to DRP host. Send as best effort
-		 * on PCA. */
-		wlp_tx_hdr_set_delivery_id_type(wlp_tx_hdr, i1480u->options.pca_base_priority);
-	}
-
-	result = usb_submit_urb(wtx->urb, GFP_ATOMIC);		/* Go baby */
-	if (result < 0) {
-		dev_err(dev, "TX: cannot submit URB: %d\n", result);
-		/* We leave the freeing of skb to calling function */
-		wtx->skb = NULL;
-		goto error_tx_urb_submit;
-	}
-	atomic_inc(&i1480u->tx_inflight.count);
-	net_dev->trans_start = jiffies;
-	return result;
-
-error_tx_urb_submit:
-	i1480u_tx_destroy(i1480u, wtx);
-error_wtx_alloc:
-error_max_inflight:
-out:
-	return result;
-}
-
-
-/*
- * Transmit an skb  Called when an skbuf has to be transmitted
- *
- * The skb is first passed to WLP substack to ensure this is a valid
- * frame. If valid the device address of destination will be filled and
- * the WLP header prepended to the skb. If this step fails we fake sending
- * the frame, if we return an error the network stack will just keep trying.
- *
- * Broadcast frames inside a WSS needs to be treated special as multicast is
- * not supported. A broadcast frame is sent as unicast to each member of the
- * WSS - this is done by the WLP substack when it finds a broadcast frame.
- * So, we test if the WLP substack took over the skb and only transmit it
- * if it has not (been taken over).
- *
- * @net_dev->xmit_lock is held
- */
-netdev_tx_t i1480u_hard_start_xmit(struct sk_buff *skb,
-					 struct net_device *net_dev)
-{
-	int result;
-	struct i1480u *i1480u = netdev_priv(net_dev);
-	struct device *dev = &i1480u->usb_iface->dev;
-	struct uwb_dev_addr dst;
-
-	if ((net_dev->flags & IFF_UP) == 0)
-		goto error;
-	result = wlp_prepare_tx_frame(dev, &i1480u->wlp, skb, &dst);
-	if (result < 0) {
-		dev_err(dev, "WLP verification of TX frame failed (%d). "
-			"Dropping packet.\n", result);
-		goto error;
-	} else if (result == 1) {
-		/* trans_start time will be set when WLP actually transmits
-		 * the frame */
-		goto out;
-	}
-	result = i1480u_xmit_frame(&i1480u->wlp, skb, &dst);
-	if (result < 0) {
-		dev_err(dev, "Frame TX failed (%d).\n", result);
-		goto error;
-	}
-	return NETDEV_TX_OK;
-error:
-	dev_kfree_skb_any(skb);
-	net_dev->stats.tx_dropped++;
-out:
-	return NETDEV_TX_OK;
-}
-
-
-/*
- * Called when a pkt transmission doesn't complete in a reasonable period
- * Device reset may sleep - do it outside of interrupt context (delayed)
- */
-void i1480u_tx_timeout(struct net_device *net_dev)
-{
-	struct i1480u *i1480u = netdev_priv(net_dev);
-
-	wlp_reset_all(&i1480u->wlp);
-}
-
-
-void i1480u_tx_release(struct i1480u *i1480u)
-{
-	unsigned long flags;
-	struct i1480u_tx *wtx, *next;
-	int count = 0, empty;
-
-	spin_lock_irqsave(&i1480u->tx_list_lock, flags);
-	list_for_each_entry_safe(wtx, next, &i1480u->tx_list, list_node) {
-		count++;
-		usb_unlink_urb(wtx->urb);
-	}
-	spin_unlock_irqrestore(&i1480u->tx_list_lock, flags);
-	count = count*10; /* i1480ut 200ms per unlinked urb (intervals of 20ms) */
-	/*
-	 * We don't like this sollution too much (dirty as it is), but
-	 * it is cheaper than putting a refcount on each i1480u_tx and
-	 * i1480uting for all of them to go away...
-	 *
-	 * Called when no more packets can be added to tx_list
-	 * so can i1480ut for it to be empty.
-	 */
-	while (1) {
-		spin_lock_irqsave(&i1480u->tx_list_lock, flags);
-		empty = list_empty(&i1480u->tx_list);
-		spin_unlock_irqrestore(&i1480u->tx_list_lock, flags);
-		if (empty)
-			break;
-		count--;
-		BUG_ON(count == 0);
-		msleep(20);
-	}
-}