summaryrefslogtreecommitdiffstats
path: root/drivers/uwb
diff options
context:
space:
mode:
authorInaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>2008-09-17 16:34:15 +0100
committerDavid Vrabel <dv02@dv02pc01.europe.root.pri>2008-09-17 16:54:26 +0100
commitde520b8bd5525d33e6a6f36b297836125736bd2a (patch)
treeb852d4fe2d38f3ec4c481ac49029b7b105eed7d4 /drivers/uwb
parentb6e069830c5927fd4d5fce67cb6440fddd10d429 (diff)
uwb: add HWA radio controller driver
Add a driver for USB-connected UWB radio controllers (HWAs). Signed-off-by: David Vrabel <david.vrabel@csr.com>
Diffstat (limited to 'drivers/uwb')
-rw-r--r--drivers/uwb/Kconfig12
-rw-r--r--drivers/uwb/Makefile1
-rw-r--r--drivers/uwb/hwa-rc.c911
3 files changed, 924 insertions, 0 deletions
diff --git a/drivers/uwb/Kconfig b/drivers/uwb/Kconfig
index c0eb973111e..a442f39f354 100644
--- a/drivers/uwb/Kconfig
+++ b/drivers/uwb/Kconfig
@@ -29,6 +29,18 @@ menuconfig UWB
if UWB
+config UWB_HWA
+ tristate "UWB Radio Control driver for WUSB-compliant USB dongles (HWA)"
+ depends on USB
+ help
+ This driver enables the radio controller for HWA USB
+ devices. HWA stands for Host Wire Adapter, and it is a UWB
+ Radio Controller connected to your system via USB. Most of
+ them come with a Wireless USB host controller also.
+
+ To compile this driver select Y (built in) or M (module). It
+ is safe to select any even if you do not have the hardware.
+
config UWB_WHCI
tristate "UWB Radio Control driver for WHCI-compliant cards"
depends on PCI
diff --git a/drivers/uwb/Makefile b/drivers/uwb/Makefile
index bdcb494b00e..6bdb8e7f91c 100644
--- a/drivers/uwb/Makefile
+++ b/drivers/uwb/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_UWB) += uwb.o
obj-$(CONFIG_UWB_WHCI) += umc.o whci.o whc-rc.o
+obj-$(CONFIG_UWB_HWA) += hwa-rc.o
uwb-objs := \
address.o \
diff --git a/drivers/uwb/hwa-rc.c b/drivers/uwb/hwa-rc.c
new file mode 100644
index 00000000000..f822a1872e4
--- /dev/null
+++ b/drivers/uwb/hwa-rc.c
@@ -0,0 +1,911 @@
+/*
+ * WUSB Host Wire Adapter: Radio Control Interface (WUSB[8.6])
+ * Radio Control command/event transport
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Initialize the Radio Control interface Driver.
+ *
+ * For each device probed, creates an 'struct hwarc' which contains
+ * just the representation of the UWB Radio Controller, and the logic
+ * for reading notifications and passing them to the UWB Core.
+ *
+ * So we initialize all of those, register the UWB Radio Controller
+ * and setup the notification/event handle to pipe the notifications
+ * to the UWB management Daemon.
+ *
+ * Command and event filtering.
+ *
+ * This is the driver for the Radio Control Interface described in WUSB
+ * 1.0. The core UWB module assumes that all drivers are compliant to the
+ * WHCI 0.95 specification. We thus create a filter that parses all
+ * incoming messages from the (WUSB 1.0) device and manipulate them to
+ * conform to the WHCI 0.95 specification. Similarly, outgoing messages
+ * are parsed and manipulated to conform to the WUSB 1.0 compliant messages
+ * that the device expects. Only a few messages are affected:
+ * Affected events:
+ * UWB_RC_EVT_BEACON
+ * UWB_RC_EVT_BP_SLOT_CHANGE
+ * UWB_RC_EVT_DRP_AVAIL
+ * UWB_RC_EVT_DRP
+ * Affected commands:
+ * UWB_RC_CMD_SCAN
+ * UWB_RC_CMD_SET_DRP_IE
+ *
+ *
+ *
+ */
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/wusb.h>
+#include <linux/usb/wusb-wa.h>
+#include <linux/uwb.h>
+#include "uwb-internal.h"
+#define D_LOCAL 1
+#include <linux/uwb/debug.h>
+
+
+/**
+ * Descriptor for an instance of the UWB Radio Control Driver that
+ * attaches to the RCI interface of the Host Wired Adapter.
+ *
+ * Unless there is a lock specific to the 'data members', all access
+ * is protected by uwb_rc->mutex.
+ *
+ * The NEEP (Notification/Event EndPoint) URB (@neep_urb) writes to
+ * @rd_buffer. Note there is no locking because it is perfectly (heh!)
+ * serialized--probe() submits an URB, callback is called, processes
+ * the data (synchronously), submits another URB, and so on. There is
+ * no concurrent access to the buffer.
+ */
+struct hwarc {
+ struct usb_device *usb_dev;
+ struct usb_interface *usb_iface;
+ struct uwb_rc *uwb_rc; /* UWB host controller */
+ struct urb *neep_urb; /* Notification endpoint handling */
+ struct edc neep_edc;
+ void *rd_buffer; /* NEEP read buffer */
+};
+
+
+/* Beacon received notification (WUSB 1.0 [8.6.3.2]) */
+struct uwb_rc_evt_beacon_WUSB_0100 {
+ struct uwb_rceb rceb;
+ u8 bChannelNumber;
+ __le16 wBPSTOffset;
+ u8 bLQI;
+ u8 bRSSI;
+ __le16 wBeaconInfoLength;
+ u8 BeaconInfo[];
+} __attribute__((packed));
+
+/**
+ * Filter WUSB 1.0 BEACON RCV notification to be WHCI 0.95
+ *
+ * @header: the incoming event
+ * @buf_size: size of buffer containing incoming event
+ * @new_size: size of event after filtering completed
+ *
+ * The WHCI 0.95 spec has a "Beacon Type" field. This value is unknown at
+ * the time we receive the beacon from WUSB so we just set it to
+ * UWB_RC_BEACON_TYPE_NEIGHBOR as a default.
+ * The solution below allocates memory upon receipt of every beacon from a
+ * WUSB device. This will deteriorate performance. What is the right way to
+ * do this?
+ */
+static
+int hwarc_filter_evt_beacon_WUSB_0100(struct uwb_rc *rc,
+ struct uwb_rceb **header,
+ const size_t buf_size,
+ size_t *new_size)
+{
+ struct uwb_rc_evt_beacon_WUSB_0100 *be;
+ struct uwb_rc_evt_beacon *newbe;
+ size_t bytes_left, ielength;
+ struct device *dev = &rc->uwb_dev.dev;
+
+ be = container_of(*header, struct uwb_rc_evt_beacon_WUSB_0100, rceb);
+ bytes_left = buf_size;
+ if (bytes_left < sizeof(*be)) {
+ dev_err(dev, "Beacon Received Notification: Not enough data "
+ "to decode for filtering (%zu vs %zu bytes needed)\n",
+ bytes_left, sizeof(*be));
+ return -EINVAL;
+ }
+ bytes_left -= sizeof(*be);
+ ielength = le16_to_cpu(be->wBeaconInfoLength);
+ if (bytes_left < ielength) {
+ dev_err(dev, "Beacon Received Notification: Not enough data "
+ "to decode IEs (%zu vs %zu bytes needed)\n",
+ bytes_left, ielength);
+ return -EINVAL;
+ }
+ newbe = kzalloc(sizeof(*newbe) + ielength, GFP_ATOMIC);
+ if (newbe == NULL)
+ return -ENOMEM;
+ newbe->rceb = be->rceb;
+ newbe->bChannelNumber = be->bChannelNumber;
+ newbe->bBeaconType = UWB_RC_BEACON_TYPE_NEIGHBOR;
+ newbe->wBPSTOffset = be->wBPSTOffset;
+ newbe->bLQI = be->bLQI;
+ newbe->bRSSI = be->bRSSI;
+ newbe->wBeaconInfoLength = be->wBeaconInfoLength;
+ memcpy(newbe->BeaconInfo, be->BeaconInfo, ielength);
+ *header = &newbe->rceb;
+ *new_size = sizeof(*newbe) + ielength;
+ return 1; /* calling function will free memory */
+}
+
+
+/* DRP Availability change notification (WUSB 1.0 [8.6.3.8]) */
+struct uwb_rc_evt_drp_avail_WUSB_0100 {
+ struct uwb_rceb rceb;
+ __le16 wIELength;
+ u8 IEData[];
+} __attribute__((packed));
+
+/**
+ * Filter WUSB 1.0 DRP AVAILABILITY CHANGE notification to be WHCI 0.95
+ *
+ * @header: the incoming event
+ * @buf_size: size of buffer containing incoming event
+ * @new_size: size of event after filtering completed
+ */
+static
+int hwarc_filter_evt_drp_avail_WUSB_0100(struct uwb_rc *rc,
+ struct uwb_rceb **header,
+ const size_t buf_size,
+ size_t *new_size)
+{
+ struct uwb_rc_evt_drp_avail_WUSB_0100 *da;
+ struct uwb_rc_evt_drp_avail *newda;
+ struct uwb_ie_hdr *ie_hdr;
+ size_t bytes_left, ielength;
+ struct device *dev = &rc->uwb_dev.dev;
+
+
+ da = container_of(*header, struct uwb_rc_evt_drp_avail_WUSB_0100, rceb);
+ bytes_left = buf_size;
+ if (bytes_left < sizeof(*da)) {
+ dev_err(dev, "Not enough data to decode DRP Avail "
+ "Notification for filtering. Expected %zu, "
+ "received %zu.\n", (size_t)sizeof(*da), bytes_left);
+ return -EINVAL;
+ }
+ bytes_left -= sizeof(*da);
+ ielength = le16_to_cpu(da->wIELength);
+ if (bytes_left < ielength) {
+ dev_err(dev, "DRP Avail Notification filter: IE length "
+ "[%zu bytes] does not match actual length "
+ "[%zu bytes].\n", ielength, bytes_left);
+ return -EINVAL;
+ }
+ if (ielength < sizeof(*ie_hdr)) {
+ dev_err(dev, "DRP Avail Notification filter: Not enough "
+ "data to decode IE [%zu bytes, %zu needed]\n",
+ ielength, sizeof(*ie_hdr));
+ return -EINVAL;
+ }
+ ie_hdr = (void *) da->IEData;
+ if (ie_hdr->length > 32) {
+ dev_err(dev, "DRP Availability Change event has unexpected "
+ "length for filtering. Expected < 32 bytes, "
+ "got %zu bytes.\n", (size_t)ie_hdr->length);
+ return -EINVAL;
+ }
+ newda = kzalloc(sizeof(*newda), GFP_ATOMIC);
+ if (newda == NULL)
+ return -ENOMEM;
+ newda->rceb = da->rceb;
+ memcpy(newda->bmp, (u8 *) ie_hdr + sizeof(*ie_hdr), ie_hdr->length);
+ *header = &newda->rceb;
+ *new_size = sizeof(*newda);
+ return 1; /* calling function will free memory */
+}
+
+
+/* DRP notification (WUSB 1.0 [8.6.3.9]) */
+struct uwb_rc_evt_drp_WUSB_0100 {
+ struct uwb_rceb rceb;
+ struct uwb_dev_addr wSrcAddr;
+ u8 bExplicit;
+ __le16 wIELength;
+ u8 IEData[];
+} __attribute__((packed));
+
+/**
+ * Filter WUSB 1.0 DRP Notification to be WHCI 0.95
+ *
+ * @header: the incoming event
+ * @buf_size: size of buffer containing incoming event
+ * @new_size: size of event after filtering completed
+ *
+ * It is hard to manage DRP reservations without having a Reason code.
+ * Unfortunately there is none in the WUSB spec. We just set the default to
+ * DRP IE RECEIVED.
+ * We do not currently use the bBeaconSlotNumber value, so we set this to
+ * zero for now.
+ */
+static
+int hwarc_filter_evt_drp_WUSB_0100(struct uwb_rc *rc,
+ struct uwb_rceb **header,
+ const size_t buf_size,
+ size_t *new_size)
+{
+ struct uwb_rc_evt_drp_WUSB_0100 *drpev;
+ struct uwb_rc_evt_drp *newdrpev;
+ size_t bytes_left, ielength;
+ struct device *dev = &rc->uwb_dev.dev;
+
+ drpev = container_of(*header, struct uwb_rc_evt_drp_WUSB_0100, rceb);
+ bytes_left = buf_size;
+ if (bytes_left < sizeof(*drpev)) {
+ dev_err(dev, "Not enough data to decode DRP Notification "
+ "for filtering. Expected %zu, received %zu.\n",
+ (size_t)sizeof(*drpev), bytes_left);
+ return -EINVAL;
+ }
+ ielength = le16_to_cpu(drpev->wIELength);
+ bytes_left -= sizeof(*drpev);
+ if (bytes_left < ielength) {
+ dev_err(dev, "DRP Notification filter: header length [%zu "
+ "bytes] does not match actual length [%zu "
+ "bytes].\n", ielength, bytes_left);
+ return -EINVAL;
+ }
+ newdrpev = kzalloc(sizeof(*newdrpev) + ielength, GFP_ATOMIC);
+ if (newdrpev == NULL)
+ return -ENOMEM;
+ newdrpev->rceb = drpev->rceb;
+ newdrpev->src_addr = drpev->wSrcAddr;
+ newdrpev->reason = UWB_DRP_NOTIF_DRP_IE_RCVD;
+ newdrpev->beacon_slot_number = 0;
+ newdrpev->ie_length = drpev->wIELength;
+ memcpy(newdrpev->ie_data, drpev->IEData, ielength);
+ *header = &newdrpev->rceb;
+ *new_size = sizeof(*newdrpev) + ielength;
+ return 1; /* calling function will free memory */
+}
+
+
+/* Scan Command (WUSB 1.0 [8.6.2.5]) */
+struct uwb_rc_cmd_scan_WUSB_0100 {
+ struct uwb_rccb rccb;
+ u8 bChannelNumber;
+ u8 bScanState;
+} __attribute__((packed));
+
+/**
+ * Filter WHCI 0.95 SCAN command to be WUSB 1.0 SCAN command
+ *
+ * @header: command sent to device (compliant to WHCI 0.95)
+ * @size: size of command sent to device
+ *
+ * We only reduce the size by two bytes because the WUSB 1.0 scan command
+ * does not have the last field (wStarttime). Also, make sure we don't send
+ * the device an unexpected scan type.
+ */
+static
+int hwarc_filter_cmd_scan_WUSB_0100(struct uwb_rc *rc,
+ struct uwb_rccb **header,
+ size_t *size)
+{
+ struct uwb_rc_cmd_scan *sc;
+
+ sc = container_of(*header, struct uwb_rc_cmd_scan, rccb);
+
+ if (sc->bScanState == UWB_SCAN_ONLY_STARTTIME)
+ sc->bScanState = UWB_SCAN_ONLY;
+ /* Don't send the last two bytes. */
+ *size -= 2;
+ return 0;
+}
+
+
+/* SET DRP IE command (WUSB 1.0 [8.6.2.7]) */
+struct uwb_rc_cmd_set_drp_ie_WUSB_0100 {
+ struct uwb_rccb rccb;
+ u8 bExplicit;
+ __le16 wIELength;
+ struct uwb_ie_drp IEData[];
+} __attribute__((packed));
+
+/**
+ * Filter WHCI 0.95 SET DRP IE command to be WUSB 1.0 SET DRP IE command
+ *
+ * @header: command sent to device (compliant to WHCI 0.95)
+ * @size: size of command sent to device
+ *
+ * WUSB has an extra bExplicit field - we assume always explicit
+ * negotiation so this field is set. The command expected by the device is
+ * thus larger than the one prepared by the driver so we need to
+ * reallocate memory to accommodate this.
+ * We trust the driver to send us the correct data so no checking is done
+ * on incoming data - evn though it is variable length.
+ */
+static
+int hwarc_filter_cmd_set_drp_ie_WUSB_0100(struct uwb_rc *rc,
+ struct uwb_rccb **header,
+ size_t *size)
+{
+ struct uwb_rc_cmd_set_drp_ie *orgcmd;
+ struct uwb_rc_cmd_set_drp_ie_WUSB_0100 *cmd;
+ size_t ielength;
+
+ orgcmd = container_of(*header, struct uwb_rc_cmd_set_drp_ie, rccb);
+ ielength = le16_to_cpu(orgcmd->wIELength);
+ cmd = kzalloc(sizeof(*cmd) + ielength, GFP_KERNEL);
+ if (cmd == NULL)
+ return -ENOMEM;
+ cmd->rccb = orgcmd->rccb;
+ cmd->bExplicit = 0;
+ cmd->wIELength = orgcmd->wIELength;
+ memcpy(cmd->IEData, orgcmd->IEData, ielength);
+ *header = &cmd->rccb;
+ *size = sizeof(*cmd) + ielength;
+ return 1; /* calling function will free memory */
+}
+
+
+/**
+ * Filter data from WHCI driver to WUSB device
+ *
+ * @header: WHCI 0.95 compliant command from driver
+ * @size: length of command
+ *
+ * The routine managing commands to the device (uwb_rc_cmd()) will call the
+ * filtering function pointer (if it exists) before it passes any data to
+ * the device. At this time the command has been formatted according to
+ * WHCI 0.95 and is ready to be sent to the device.
+ *
+ * The filter function will be provided with the current command and its
+ * length. The function will manipulate the command if necessary and
+ * potentially reallocate memory for a command that needed more memory that
+ * the given command. If new memory was created the function will return 1
+ * to indicate to the calling function that the memory need to be freed
+ * when not needed any more. The size will contain the new length of the
+ * command.
+ * If memory has not been allocated we rely on the original mechanisms to
+ * free the memory of the command - even when we reduce the value of size.
+ */
+static
+int hwarc_filter_cmd_WUSB_0100(struct uwb_rc *rc, struct uwb_rccb **header,
+ size_t *size)
+{
+ int result;
+ struct uwb_rccb *rccb = *header;
+ int cmd = le16_to_cpu(rccb->wCommand);
+ switch (cmd) {
+ case UWB_RC_CMD_SCAN:
+ result = hwarc_filter_cmd_scan_WUSB_0100(rc, header, size);
+ break;
+ case UWB_RC_CMD_SET_DRP_IE:
+ result = hwarc_filter_cmd_set_drp_ie_WUSB_0100(rc, header, size);
+ break;
+ default:
+ result = -ENOANO;
+ break;
+ }
+ return result;
+}
+
+
+/**
+ * Filter data from WHCI driver to WUSB device
+ *
+ * @header: WHCI 0.95 compliant command from driver
+ * @size: length of command
+ *
+ * Filter commands based on which protocol the device supports. The WUSB
+ * errata should be the same as WHCI 0.95 so we do not filter that here -
+ * only WUSB 1.0.
+ */
+static
+int hwarc_filter_cmd(struct uwb_rc *rc, struct uwb_rccb **header,
+ size_t *size)
+{
+ int result = -ENOANO;
+ if (rc->version == 0x0100)
+ result = hwarc_filter_cmd_WUSB_0100(rc, header, size);
+ return result;
+}
+
+
+/**
+ * Compute return value as sum of incoming value and value at given offset
+ *
+ * @rceb: event for which we compute the size, it contains a variable
+ * length field.
+ * @core_size: size of the "non variable" part of the event
+ * @offset: place in event where the length of the variable part is stored
+ * @buf_size: total length of buffer in which event arrived - we need to make
+ * sure we read the offset in memory that is still part of the event
+ */
+static
+ssize_t hwarc_get_event_size(struct uwb_rc *rc, const struct uwb_rceb *rceb,
+ size_t core_size, size_t offset,
+ const size_t buf_size)
+{
+ ssize_t size = -ENOSPC;
+ const void *ptr = rceb;
+ size_t type_size = sizeof(__le16);
+ struct device *dev = &rc->uwb_dev.dev;
+
+ if (offset + type_size >= buf_size) {
+ dev_err(dev, "Not enough data to read extra size of event "
+ "0x%02x/%04x/%02x, only got %zu bytes.\n",
+ rceb->bEventType, le16_to_cpu(rceb->wEvent),
+ rceb->bEventContext, buf_size);
+ goto out;
+ }
+ ptr += offset;
+ size = core_size + le16_to_cpu(*(__le16 *)ptr);
+out:
+ return size;
+}
+
+
+/* Beacon slot change notification (WUSB 1.0 [8.6.3.5]) */
+struct uwb_rc_evt_bp_slot_change_WUSB_0100 {
+ struct uwb_rceb rceb;
+ u8 bSlotNumber;
+} __attribute__((packed));
+
+
+/**
+ * Filter data from WUSB device to WHCI driver
+ *
+ * @header: incoming event
+ * @buf_size: size of buffer in which event arrived
+ * @_event_size: actual size of event in the buffer
+ * @new_size: size of event after filtered
+ *
+ * We don't know how the buffer is constructed - there may be more than one
+ * event in it so buffer length does not determine event length. We first
+ * determine the expected size of the incoming event. This value is passed
+ * back only if the actual filtering succeeded (so we know the computed
+ * expected size is correct). This value will be zero if
+ * the event did not need any filtering.
+ *
+ * WHCI interprets the BP Slot Change event's data differently than
+ * WUSB. The event sizes are exactly the same. The data field
+ * indicates the new beacon slot in which a RC is transmitting its
+ * beacon. The maximum value of this is 96 (wMacBPLength ECMA-368
+ * 17.16 (Table 117)). We thus know that the WUSB value will not set
+ * the bit bNoSlot, so we don't really do anything (placeholder).
+ */
+static
+int hwarc_filter_event_WUSB_0100(struct uwb_rc *rc, struct uwb_rceb **header,
+ const size_t buf_size, size_t *_real_size,
+ size_t *_new_size)
+{
+ int result = -ENOANO;
+ struct uwb_rceb *rceb = *header;
+ int event = le16_to_cpu(rceb->wEvent);
+ size_t event_size;
+ size_t core_size, offset;
+
+ if (rceb->bEventType != UWB_RC_CET_GENERAL)
+ goto out;
+ switch (event) {
+ case UWB_RC_EVT_BEACON:
+ core_size = sizeof(struct uwb_rc_evt_beacon_WUSB_0100);
+ offset = offsetof(struct uwb_rc_evt_beacon_WUSB_0100,
+ wBeaconInfoLength);
+ event_size = hwarc_get_event_size(rc, rceb, core_size,
+ offset, buf_size);
+ if (event_size < 0)
+ goto out;
+ *_real_size = event_size;
+ result = hwarc_filter_evt_beacon_WUSB_0100(rc, header,
+ buf_size, _new_size);
+ break;
+ case UWB_RC_EVT_BP_SLOT_CHANGE:
+ *_new_size = *_real_size =
+ sizeof(struct uwb_rc_evt_bp_slot_change_WUSB_0100);
+ result = 0;
+ break;
+
+ case UWB_RC_EVT_DRP_AVAIL:
+ core_size = sizeof(struct uwb_rc_evt_drp_avail_WUSB_0100);
+ offset = offsetof(struct uwb_rc_evt_drp_avail_WUSB_0100,
+ wIELength);
+ event_size = hwarc_get_event_size(rc, rceb, core_size,
+ offset, buf_size);
+ if (event_size < 0)
+ goto out;
+ *_real_size = event_size;
+ result = hwarc_filter_evt_drp_avail_WUSB_0100(
+ rc, header, buf_size, _new_size);
+ break;
+
+ case UWB_RC_EVT_DRP:
+ core_size = sizeof(struct uwb_rc_evt_drp_WUSB_0100);
+ offset = offsetof(struct uwb_rc_evt_drp_WUSB_0100, wIELength);
+ event_size = hwarc_get_event_size(rc, rceb, core_size,
+ offset, buf_size);
+ if (event_size < 0)
+ goto out;
+ *_real_size = event_size;
+ result = hwarc_filter_evt_drp_WUSB_0100(rc, header,
+ buf_size, _new_size);
+ break;
+
+ default:
+ break;
+ }
+out:
+ return result;
+}
+
+/**
+ * Filter data from WUSB device to WHCI driver
+ *
+ * @header: incoming event
+ * @buf_size: size of buffer in which event arrived
+ * @_event_size: actual size of event in the buffer
+ * @_new_size: size of event after filtered
+ *
+ * Filter events based on which protocol the device supports. The WUSB
+ * errata should be the same as WHCI 0.95 so we do not filter that here -
+ * only WUSB 1.0.
+ *
+ * If we don't handle it, we return -ENOANO (why the weird error code?
+ * well, so if I get it, I can pinpoint in the code that raised
+ * it...after all, not too many places use the higher error codes).
+ */
+static
+int hwarc_filter_event(struct uwb_rc *rc, struct uwb_rceb **header,
+ const size_t buf_size, size_t *_real_size,
+ size_t *_new_size)
+{
+ int result = -ENOANO;
+ if (rc->version == 0x0100)
+ result = hwarc_filter_event_WUSB_0100(
+ rc, header, buf_size, _real_size, _new_size);
+ return result;
+}
+
+
+/**
+ * Execute an UWB RC command on HWA
+ *
+ * @rc: Instance of a Radio Controller that is a HWA
+ * @cmd: Buffer containing the RCCB and payload to execute
+ * @cmd_size: Size of the command buffer.
+ *
+ * NOTE: rc's mutex has to be locked
+ */
+static
+int hwarc_cmd(struct uwb_rc *uwb_rc, const struct uwb_rccb *cmd, size_t cmd_size)
+{
+ struct hwarc *hwarc = uwb_rc->priv;
+ return usb_control_msg(
+ hwarc->usb_dev, usb_sndctrlpipe(hwarc->usb_dev, 0),
+ WA_EXEC_RC_CMD, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, hwarc->usb_iface->cur_altsetting->desc.bInterfaceNumber,
+ (void *) cmd, cmd_size, 100 /* FIXME: this is totally arbitrary */);
+}
+
+static
+int hwarc_reset(struct uwb_rc *uwb_rc)
+{
+ struct hwarc *hwarc = uwb_rc->priv;
+ return usb_reset_device(hwarc->usb_dev);
+}
+
+/**
+ * Callback for the notification and event endpoint
+ *
+ * Check's that everything is fine and then passes the read data to
+ * the notification/event handling mechanism (neh).
+ */
+static
+void hwarc_neep_cb(struct urb *urb)
+{
+ struct hwarc *hwarc = urb->context;
+ struct usb_interface *usb_iface = hwarc->usb_iface;
+ struct device *dev = &usb_iface->dev;
+ int result;
+
+ switch (result = urb->status) {
+ case 0:
+ d_printf(3, dev, "NEEP: receive stat %d, %zu bytes\n",
+ urb->status, (size_t)urb->actual_length);
+ uwb_rc_neh_grok(hwarc->uwb_rc, urb->transfer_buffer,
+ urb->actual_length);
+ break;
+ case -ECONNRESET: /* Not an error, but a controlled situation; */
+ case -ENOENT: /* (we killed the URB)...so, no broadcast */
+ d_printf(2, dev, "NEEP: URB reset/noent %d\n", urb->status);
+ goto out;
+ case -ESHUTDOWN: /* going away! */
+ d_printf(2, dev, "NEEP: URB down %d\n", urb->status);
+ goto out;
+ default: /* On general errors, retry unless it gets ugly */
+ if (edc_inc(&hwarc->neep_edc, EDC_MAX_ERRORS,
+ EDC_ERROR_TIMEFRAME))
+ goto error_exceeded;
+ dev_err(dev, "NEEP: URB error %d\n", urb->status);
+ }
+ result = usb_submit_urb(urb, GFP_ATOMIC);
+ d_printf(3, dev, "NEEP: submit %d\n", result);
+ if (result < 0) {
+ dev_err(dev, "NEEP: Can't resubmit URB (%d) resetting device\n",
+ result);
+ goto error;
+ }
+out:
+ return;
+
+error_exceeded:
+ dev_err(dev, "NEEP: URB max acceptable errors "
+ "exceeded, resetting device\n");
+error:
+ uwb_rc_neh_error(hwarc->uwb_rc, result);
+ uwb_rc_reset_all(hwarc->uwb_rc);
+ return;
+}
+
+static void hwarc_init(struct hwarc *hwarc)
+{
+ edc_init(&hwarc->neep_edc);
+}
+
+/**
+ * Initialize the notification/event endpoint stuff
+ *
+ * Note this is effectively a parallel thread; it knows that
+ * hwarc->uwb_rc always exists because the existence of a 'hwarc'
+ * means that there is a reverence on the hwarc->uwb_rc (see
+ * _probe()), and thus _neep_cb() can execute safely.
+ */
+static int hwarc_neep_init(struct uwb_rc *rc)
+{
+ struct hwarc *hwarc = rc->priv;
+ struct usb_interface *iface = hwarc->usb_iface;
+ struct usb_device *usb_dev = interface_to_usbdev(iface);
+ struct device *dev = &iface->dev;
+ int result;
+ struct usb_endpoint_descriptor *epd;
+
+ epd = &iface->cur_altsetting->endpoint[0].desc;
+ hwarc->rd_buffer = (void *) __get_free_page(GFP_KERNEL);
+ if (hwarc->rd_buffer == NULL) {
+ dev_err(dev, "Unable to allocate notification's read buffer\n");
+ goto error_rd_buffer;
+ }
+ hwarc->neep_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (hwarc->neep_urb == NULL) {
+ dev_err(dev, "Unable to allocate notification URB\n");
+ goto error_urb_alloc;
+ }
+ usb_fill_int_urb(hwarc->neep_urb, usb_dev,
+ usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
+ hwarc->rd_buffer, PAGE_SIZE,
+ hwarc_neep_cb, hwarc, epd->bInterval);
+ result = usb_submit_urb(hwarc->neep_urb, GFP_ATOMIC);
+ if (result < 0) {
+ dev_err(dev, "Cannot submit notification URB: %d\n", result);
+ goto error_neep_submit;
+ }
+ return 0;
+
+error_neep_submit:
+ usb_free_urb(hwarc->neep_urb);
+error_urb_alloc:
+ free_page((unsigned long)hwarc->rd_buffer);
+error_rd_buffer:
+ return -ENOMEM;
+}
+
+
+/** Clean up all the notification endpoint resources */
+static void hwarc_neep_release(struct uwb_rc *rc)
+{
+ struct hwarc *hwarc = rc->priv;
+
+ usb_kill_urb(hwarc->neep_urb);
+ usb_free_urb(hwarc->neep_urb);
+ free_page((unsigned long)hwarc->rd_buffer);
+}
+
+/**
+ * Get the version from class-specific descriptor
+ *
+ * NOTE: this descriptor comes with the big bundled configuration
+ * descriptor that includes the interfaces' and endpoints', so
+ * we just look for it in the cached copy kept by the USB stack.
+ *
+ * NOTE2: We convert LE fields to CPU order.
+ */
+static int hwarc_get_version(struct uwb_rc *rc)
+{
+ int result;
+
+ struct hwarc *hwarc = rc->priv;
+ struct uwb_rc_control_intf_class_desc *descr;
+ struct device *dev = &rc->uwb_dev.dev;
+ struct usb_device *usb_dev = hwarc->usb_dev;
+ char *itr;
+ struct usb_descriptor_header *hdr;
+ size_t itr_size, actconfig_idx;
+ u16 version;
+
+ actconfig_idx = (usb_dev->actconfig - usb_dev->config) /
+ sizeof(usb_dev->config[0]);
+ itr = usb_dev->rawdescriptors[actconfig_idx];
+ itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength);
+ while (itr_size >= sizeof(*hdr)) {
+ hdr = (struct usb_descriptor_header *) itr;
+ d_printf(3, dev, "Extra device descriptor: "
+ "type %02x/%u bytes @ %zu (%zu left)\n",
+ hdr->bDescriptorType, hdr->bLength,
+ (itr - usb_dev->rawdescriptors[actconfig_idx]),
+ itr_size);
+ if (hdr->bDescriptorType == USB_DT_CS_RADIO_CONTROL)
+ goto found;
+ itr += hdr->bLength;
+ itr_size -= hdr->bLength;
+ }
+ dev_err(dev, "cannot find Radio Control Interface Class descriptor\n");
+ return -ENODEV;
+
+found:
+ result = -EINVAL;
+ if (hdr->bLength > itr_size) { /* is it available? */
+ dev_err(dev, "incomplete Radio Control Interface Class "
+ "descriptor (%zu bytes left, %u needed)\n",
+ itr_size, hdr->bLength);
+ goto error;
+ }
+ if (hdr->bLength < sizeof(*descr)) {
+ dev_err(dev, "short Radio Control Interface Class "
+ "descriptor\n");
+ goto error;
+ }
+ descr = (struct uwb_rc_control_intf_class_desc *) hdr;
+ /* Make LE fields CPU order */
+ version = __le16_to_cpu(descr->bcdRCIVersion);
+ if (version != 0x0100) {
+ dev_err(dev, "Device reports protocol version 0x%04x. We "
+ "do not support that. \n", version);
+ result = -EINVAL;
+ goto error;
+ }
+ rc->version = version;
+ d_printf(3, dev, "Device supports WUSB protocol version 0x%04x \n",
+ rc->version);
+ result = 0;
+error:
+ return result;
+}
+
+/*
+ * By creating a 'uwb_rc', we have a reference on it -- that reference
+ * is the one we drop when we disconnect.
+ *
+ * No need to switch altsettings; according to WUSB1.0[8.6.1.1], there
+ * is only one altsetting allowed.
+ */
+static int hwarc_probe(struct usb_interface *iface,
+ const struct usb_device_id *id)
+{
+ int result;
+ struct uwb_rc *uwb_rc;
+ struct hwarc *hwarc;
+ struct device *dev = &iface->dev;
+
+ result = -ENOMEM;
+ uwb_rc = uwb_rc_alloc();
+ if (uwb_rc == NULL) {
+ dev_err(dev, "unable to allocate RC instance\n");
+ goto error_rc_alloc;
+ }
+ hwarc = kzalloc(sizeof(*hwarc), GFP_KERNEL);
+ if (hwarc == NULL) {
+ dev_err(dev, "unable to allocate HWA RC instance\n");
+ goto error_alloc;
+ }
+ hwarc_init(hwarc);
+ hwarc->usb_dev = usb_get_dev(interface_to_usbdev(iface));
+ hwarc->usb_iface = usb_get_intf(iface);
+ hwarc->uwb_rc = uwb_rc;
+
+ uwb_rc->owner = THIS_MODULE;
+ uwb_rc->start = hwarc_neep_init;
+ uwb_rc->stop = hwarc_neep_release;
+ uwb_rc->cmd = hwarc_cmd;
+ uwb_rc->reset = hwarc_reset;
+ uwb_rc->filter_cmd = hwarc_filter_cmd;
+ uwb_rc->filter_event = hwarc_filter_event;
+
+ result = uwb_rc_add(uwb_rc, dev, hwarc);
+ if (result < 0)
+ goto error_rc_add;
+ result = hwarc_get_version(uwb_rc);
+ if (result < 0) {
+ dev_err(dev, "cannot retrieve version of RC \n");
+ goto error_get_version;
+ }
+ usb_set_intfdata(iface, hwarc);
+ return 0;
+
+error_get_version:
+ uwb_rc_rm(uwb_rc);
+error_rc_add:
+ usb_put_intf(iface);
+ usb_put_dev(hwarc->usb_dev);
+error_alloc:
+ uwb_rc_put(uwb_rc);
+error_rc_alloc:
+ return result;
+}
+
+static void hwarc_disconnect(struct usb_interface *iface)
+{
+ struct hwarc *hwarc = usb_get_intfdata(iface);
+ struct uwb_rc *uwb_rc = hwarc->uwb_rc;
+
+ usb_set_intfdata(hwarc->usb_iface, NULL);
+ uwb_rc_rm(uwb_rc);
+ usb_put_intf(hwarc->usb_iface);
+ usb_put_dev(hwarc->usb_dev);
+ d_printf(1, &hwarc->usb_iface->dev, "freed hwarc %p\n", hwarc);
+ kfree(hwarc);
+ uwb_rc_put(uwb_rc); /* when creating the device, refcount = 1 */
+}
+
+/** USB device ID's that we handle */
+static struct usb_device_id hwarc_id_table[] = {
+ { USB_INTERFACE_INFO(0xe0, 0x01, 0x02), },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, hwarc_id_table);
+
+static struct usb_driver hwarc_driver = {
+ .name = "hwa-rc",
+ .probe = hwarc_probe,
+ .disconnect = hwarc_disconnect,
+ .id_table = hwarc_id_table,
+};
+
+static int __init hwarc_driver_init(void)
+{
+ int result;
+ result = usb_register(&hwarc_driver);
+ if (result < 0)
+ printk(KERN_ERR "HWA-RC: Cannot register USB driver: %d\n",
+ result);
+ return result;
+
+}
+module_init(hwarc_driver_init);
+
+static void __exit hwarc_driver_exit(void)
+{
+ usb_deregister(&hwarc_driver);
+}
+module_exit(hwarc_driver_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("Host Wireless Adapter Radio Control Driver");
+MODULE_LICENSE("GPL");