Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 2485 insertions, 0 deletions

diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
new file mode 100644
index 00000000000..8a4ba3bb987
--- /dev/null
+++ b/drivers/video/aty/aty128fb.c
@@ -0,0 +1,2485 @@
+/* $Id: aty128fb.c,v 1.1.1.1.36.1 1999/12/11 09:03:05 Exp $
+ *  linux/drivers/video/aty128fb.c -- Frame buffer device for ATI Rage128
+ *
+ *  Copyright (C) 1999-2003, Brad Douglas <brad@neruo.com>
+ *  Copyright (C) 1999, Anthony Tong <atong@uiuc.edu>
+ *
+ *                Ani Joshi / Jeff Garzik
+ *                      - Code cleanup
+ *
+ *                Michel Danzer <michdaen@iiic.ethz.ch>
+ *                      - 15/16 bit cleanup
+ *                      - fix panning
+ *
+ *                Benjamin Herrenschmidt
+ *                      - pmac-specific PM stuff
+ *			- various fixes & cleanups
+ *
+ *                Andreas Hundt <andi@convergence.de>
+ *                      - FB_ACTIVATE fixes
+ *
+ *		  Paul Mackerras <paulus@samba.org>
+ *			- Convert to new framebuffer API,
+ *			  fix colormap setting at 16 bits/pixel (565)
+ *
+ *		  Paul Mundt 
+ *		  	- PCI hotplug
+ *
+ *		  Jon Smirl <jonsmirl@yahoo.com>
+ * 			- PCI ID update
+ * 			- replace ROM BIOS search
+ *
+ *  Based off of Geert's atyfb.c and vfb.c.
+ *
+ *  TODO:
+ *		- monitor sensing (DDC)
+ *              - virtual display
+ *		- other platform support (only ppc/x86 supported)
+ *		- hardware cursor support
+ *
+ *    Please cc: your patches to brad@neruo.com.
+ */
+
+/*
+ * A special note of gratitude to ATI's devrel for providing documentation,
+ * example code and hardware. Thanks Nitya.	-atong and brad
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <asm/uaccess.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <linux/console.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_PPC_PMAC
+#include <asm/pmac_feature.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include "../macmodes.h"
+#endif
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+#include <asm/backlight.h>
+#endif
+
+#ifdef CONFIG_BOOTX_TEXT
+#include <asm/btext.h>
+#endif /* CONFIG_BOOTX_TEXT */
+
+#ifdef CONFIG_MTRR
+#include <asm/mtrr.h>
+#endif
+
+#include <video/aty128.h>
+
+/* Debug flag */
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, args...)		printk(KERN_DEBUG "aty128fb: %s " fmt, __FUNCTION__, ##args);
+#else
+#define DBG(fmt, args...)
+#endif
+
+#ifndef CONFIG_PPC_PMAC
+/* default mode */
+static struct fb_var_screeninfo default_var __initdata = {
+	/* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
+	640, 480, 640, 480, 0, 0, 8, 0,
+	{0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0},
+	0, 0, -1, -1, 0, 39722, 48, 16, 33, 10, 96, 2,
+	0, FB_VMODE_NONINTERLACED
+};
+
+#else /* CONFIG_PPC_PMAC */
+/* default to 1024x768 at 75Hz on PPC - this will work
+ * on the iMac, the usual 640x480 @ 60Hz doesn't. */
+static struct fb_var_screeninfo default_var = {
+	/* 1024x768, 75 Hz, Non-Interlaced (78.75 MHz dotclock) */
+	1024, 768, 1024, 768, 0, 0, 8, 0,
+	{0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0},
+	0, 0, -1, -1, 0, 12699, 160, 32, 28, 1, 96, 3,
+	FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	FB_VMODE_NONINTERLACED
+};
+#endif /* CONFIG_PPC_PMAC */
+
+/* default modedb mode */
+/* 640x480, 60 Hz, Non-Interlaced (25.172 MHz dotclock) */
+static struct fb_videomode defaultmode __initdata = {
+	.refresh =	60,
+	.xres =		640,
+	.yres =		480,
+	.pixclock =	39722,
+	.left_margin =	48,
+	.right_margin =	16,
+	.upper_margin =	33,
+	.lower_margin =	10,
+	.hsync_len =	96,
+	.vsync_len =	2,
+	.sync =		0,
+	.vmode =	FB_VMODE_NONINTERLACED
+};
+
+/* Chip generations */
+enum {
+	rage_128,
+	rage_128_pci,
+	rage_128_pro,
+	rage_128_pro_pci,
+	rage_M3,
+	rage_M3_pci,
+	rage_M4,
+	rage_128_ultra,
+};
+
+/* Must match above enum */
+static const char *r128_family[] __devinitdata = {
+	"AGP",
+	"PCI",
+	"PRO AGP",
+	"PRO PCI",
+	"M3 AGP",
+	"M3 PCI",
+	"M4 AGP",
+	"Ultra AGP",
+};
+
+/*
+ * PCI driver prototypes
+ */
+static int aty128_probe(struct pci_dev *pdev,
+                               const struct pci_device_id *ent);
+static void aty128_remove(struct pci_dev *pdev);
+static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state);
+static int aty128_pci_resume(struct pci_dev *pdev);
+static int aty128_do_resume(struct pci_dev *pdev);
+
+/* supported Rage128 chipsets */
+static struct pci_device_id aty128_pci_tbl[] = {
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_LE,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M3_pci },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_LF,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M3 },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_MF,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M4 },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_ML,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M4 },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PA,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PB,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PC,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PD,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro_pci },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PE,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PF,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PG,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PH,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PI,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PJ,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PK,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PL,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PM,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PN,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PO,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PP,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro_pci },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PQ,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PR,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro_pci },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PS,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PT,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PU,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PV,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PW,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PX,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RE,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pci },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RF,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RG,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RK,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pci },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RL,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SE,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SF,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pci },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SG,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SH,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SK,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SL,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SM,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SN,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TF,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TL,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TR,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TS,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TT,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TU,
+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, aty128_pci_tbl);
+
+static struct pci_driver aty128fb_driver = {
+	.name		= "aty128fb",
+	.id_table	= aty128_pci_tbl,
+	.probe		= aty128_probe,
+	.remove		= __devexit_p(aty128_remove),
+	.suspend	= aty128_pci_suspend,
+	.resume		= aty128_pci_resume,
+};
+
+/* packed BIOS settings */
+#ifndef CONFIG_PPC
+typedef struct {
+	u8 clock_chip_type;
+	u8 struct_size;
+	u8 accelerator_entry;
+	u8 VGA_entry;
+	u16 VGA_table_offset;
+	u16 POST_table_offset;
+	u16 XCLK;
+	u16 MCLK;
+	u8 num_PLL_blocks;
+	u8 size_PLL_blocks;
+	u16 PCLK_ref_freq;
+	u16 PCLK_ref_divider;
+	u32 PCLK_min_freq;
+	u32 PCLK_max_freq;
+	u16 MCLK_ref_freq;
+	u16 MCLK_ref_divider;
+	u32 MCLK_min_freq;
+	u32 MCLK_max_freq;
+	u16 XCLK_ref_freq;
+	u16 XCLK_ref_divider;
+	u32 XCLK_min_freq;
+	u32 XCLK_max_freq;
+} __attribute__ ((packed)) PLL_BLOCK;
+#endif /* !CONFIG_PPC */
+
+/* onboard memory information */
+struct aty128_meminfo {
+	u8 ML;
+	u8 MB;
+	u8 Trcd;
+	u8 Trp;
+	u8 Twr;
+	u8 CL;
+	u8 Tr2w;
+	u8 LoopLatency;
+	u8 DspOn;
+	u8 Rloop;
+	const char *name;
+};
+
+/* various memory configurations */
+static const struct aty128_meminfo sdr_128   =
+	{ 4, 4, 3, 3, 1, 3, 1, 16, 30, 16, "128-bit SDR SGRAM (1:1)" };
+static const struct aty128_meminfo sdr_64    =
+	{ 4, 8, 3, 3, 1, 3, 1, 17, 46, 17, "64-bit SDR SGRAM (1:1)" };
+static const struct aty128_meminfo sdr_sgram =
+	{ 4, 4, 1, 2, 1, 2, 1, 16, 24, 16, "64-bit SDR SGRAM (2:1)" };
+static const struct aty128_meminfo ddr_sgram =
+	{ 4, 4, 3, 3, 2, 3, 1, 16, 31, 16, "64-bit DDR SGRAM" };
+
+static struct fb_fix_screeninfo aty128fb_fix __initdata = {
+	.id		= "ATY Rage128",
+	.type		= FB_TYPE_PACKED_PIXELS,
+	.visual		= FB_VISUAL_PSEUDOCOLOR,
+	.xpanstep	= 8,
+	.ypanstep	= 1,
+	.mmio_len	= 0x2000,
+	.accel		= FB_ACCEL_ATI_RAGE128,
+};
+
+static char *mode_option __initdata = NULL;
+
+#ifdef CONFIG_PPC_PMAC
+static int default_vmode __initdata = VMODE_1024_768_60;
+static int default_cmode __initdata = CMODE_8;
+#endif
+
+#ifdef CONFIG_PMAC_PBOOK
+static int default_crt_on __initdata = 0;
+static int default_lcd_on __initdata = 1;
+#endif
+
+#ifdef CONFIG_MTRR
+static int mtrr = 1;
+#endif
+
+/* PLL constants */
+struct aty128_constants {
+	u32 ref_clk;
+	u32 ppll_min;
+	u32 ppll_max;
+	u32 ref_divider;
+	u32 xclk;
+	u32 fifo_width;
+	u32 fifo_depth;
+};
+
+struct aty128_crtc {
+	u32 gen_cntl;
+	u32 h_total, h_sync_strt_wid;
+	u32 v_total, v_sync_strt_wid;
+	u32 pitch;
+	u32 offset, offset_cntl;
+	u32 xoffset, yoffset;
+	u32 vxres, vyres;
+	u32 depth, bpp;
+};
+
+struct aty128_pll {
+	u32 post_divider;
+	u32 feedback_divider;
+	u32 vclk;
+};
+
+struct aty128_ddafifo {
+	u32 dda_config;
+	u32 dda_on_off;
+};
+
+/* register values for a specific mode */
+struct aty128fb_par {
+	struct aty128_crtc crtc;
+	struct aty128_pll pll;
+	struct aty128_ddafifo fifo_reg;
+	u32 accel_flags;
+	struct aty128_constants constants;  /* PLL and others      */
+	void __iomem *regbase;              /* remapped mmio       */
+	u32 vram_size;                      /* onboard video ram   */
+	int chip_gen;
+	const struct aty128_meminfo *mem;   /* onboard mem info    */
+#ifdef CONFIG_MTRR
+	struct { int vram; int vram_valid; } mtrr;
+#endif
+	int blitter_may_be_busy;
+	int fifo_slots;                 /* free slots in FIFO (64 max) */
+
+	int	pm_reg;
+	int crt_on, lcd_on;
+	struct pci_dev *pdev;
+	struct fb_info *next;
+	int	asleep;
+	int	lock_blank;
+
+	u8	red[32];		/* see aty128fb_setcolreg */
+	u8	green[64];
+	u8	blue[32];
+	u32	pseudo_palette[16];	/* used for TRUECOLOR */
+};
+
+
+#define round_div(n, d) ((n+(d/2))/d)
+
+static int aty128fb_check_var(struct fb_var_screeninfo *var,
+			      struct fb_info *info);
+static int aty128fb_set_par(struct fb_info *info);
+static int aty128fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+			      u_int transp, struct fb_info *info);
+static int aty128fb_pan_display(struct fb_var_screeninfo *var,
+			   struct fb_info *fb);
+static int aty128fb_blank(int blank, struct fb_info *fb);
+static int aty128fb_ioctl(struct inode *inode, struct file *file, u_int cmd,
+			  u_long arg, struct fb_info *info);
+static int aty128fb_sync(struct fb_info *info);
+
+    /*
+     *  Internal routines
+     */
+
+static int aty128_encode_var(struct fb_var_screeninfo *var,
+                             const struct aty128fb_par *par);
+static int aty128_decode_var(struct fb_var_screeninfo *var,
+                             struct aty128fb_par *par);
+#if 0
+static void __init aty128_get_pllinfo(struct aty128fb_par *par,
+				      void __iomem *bios);
+static void __init __iomem *aty128_map_ROM(struct pci_dev *pdev, const struct aty128fb_par *par);
+#endif
+static void aty128_timings(struct aty128fb_par *par);
+static void aty128_init_engine(struct aty128fb_par *par);
+static void aty128_reset_engine(const struct aty128fb_par *par);
+static void aty128_flush_pixel_cache(const struct aty128fb_par *par);
+static void do_wait_for_fifo(u16 entries, struct aty128fb_par *par);
+static void wait_for_fifo(u16 entries, struct aty128fb_par *par);
+static void wait_for_idle(struct aty128fb_par *par);
+static u32 depth_to_dst(u32 depth);
+
+#define BIOS_IN8(v)  	(readb(bios + (v)))
+#define BIOS_IN16(v) 	(readb(bios + (v)) | \
+			  (readb(bios + (v) + 1) << 8))
+#define BIOS_IN32(v) 	(readb(bios + (v)) | \
+			  (readb(bios + (v) + 1) << 8) | \
+			  (readb(bios + (v) + 2) << 16) | \
+			  (readb(bios + (v) + 3) << 24))
+
+
+static struct fb_ops aty128fb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= aty128fb_check_var,
+	.fb_set_par	= aty128fb_set_par,
+	.fb_setcolreg	= aty128fb_setcolreg,
+	.fb_pan_display = aty128fb_pan_display,
+	.fb_blank	= aty128fb_blank,
+	.fb_ioctl	= aty128fb_ioctl,
+	.fb_sync	= aty128fb_sync,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+	.fb_cursor	= soft_cursor,
+};
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+static int aty128_set_backlight_enable(int on, int level, void* data);
+static int aty128_set_backlight_level(int level, void* data);
+
+static struct backlight_controller aty128_backlight_controller = {
+	aty128_set_backlight_enable,
+	aty128_set_backlight_level
+};
+#endif /* CONFIG_PMAC_BACKLIGHT */
+
+    /*
+     * Functions to read from/write to the mmio registers
+     *	- endian conversions may possibly be avoided by
+     *    using the other register aperture. TODO.
+     */
+static inline u32 _aty_ld_le32(volatile unsigned int regindex, 
+			       const struct aty128fb_par *par)
+{
+	return readl (par->regbase + regindex);
+}
+
+static inline void _aty_st_le32(volatile unsigned int regindex, u32 val, 
+				const struct aty128fb_par *par)
+{
+	writel (val, par->regbase + regindex);
+}
+
+static inline u8 _aty_ld_8(unsigned int regindex,
+			   const struct aty128fb_par *par)
+{
+	return readb (par->regbase + regindex);
+}
+
+static inline void _aty_st_8(unsigned int regindex, u8 val,
+			     const struct aty128fb_par *par)
+{
+	writeb (val, par->regbase + regindex);
+}
+
+#define aty_ld_le32(regindex)		_aty_ld_le32(regindex, par)
+#define aty_st_le32(regindex, val)	_aty_st_le32(regindex, val, par)
+#define aty_ld_8(regindex)		_aty_ld_8(regindex, par)
+#define aty_st_8(regindex, val)		_aty_st_8(regindex, val, par)
+
+    /*
+     * Functions to read from/write to the pll registers
+     */
+
+#define aty_ld_pll(pll_index)		_aty_ld_pll(pll_index, par)
+#define aty_st_pll(pll_index, val)	_aty_st_pll(pll_index, val, par)
+
+
+static u32 _aty_ld_pll(unsigned int pll_index,
+		       const struct aty128fb_par *par)
+{       
+	aty_st_8(CLOCK_CNTL_INDEX, pll_index & 0x3F);
+	return aty_ld_le32(CLOCK_CNTL_DATA);
+}
+
+    
+static void _aty_st_pll(unsigned int pll_index, u32 val,
+			const struct aty128fb_par *par)
+{
+	aty_st_8(CLOCK_CNTL_INDEX, (pll_index & 0x3F) | PLL_WR_EN);
+	aty_st_le32(CLOCK_CNTL_DATA, val);
+}
+
+
+/* return true when the PLL has completed an atomic update */
+static int aty_pll_readupdate(const struct aty128fb_par *par)
+{
+	return !(aty_ld_pll(PPLL_REF_DIV) & PPLL_ATOMIC_UPDATE_R);
+}
+
+
+static void aty_pll_wait_readupdate(const struct aty128fb_par *par)
+{
+	unsigned long timeout = jiffies + HZ/100; // should be more than enough
+	int reset = 1;
+
+	while (time_before(jiffies, timeout))
+		if (aty_pll_readupdate(par)) {
+			reset = 0;
+			break;
+		}
+
+	if (reset)	/* reset engine?? */
+		printk(KERN_DEBUG "aty128fb: PLL write timeout!\n");
+}
+
+
+/* tell PLL to update */
+static void aty_pll_writeupdate(const struct aty128fb_par *par)
+{
+	aty_pll_wait_readupdate(par);
+
+	aty_st_pll(PPLL_REF_DIV,
+		   aty_ld_pll(PPLL_REF_DIV) | PPLL_ATOMIC_UPDATE_W);
+}
+
+
+/* write to the scratch register to test r/w functionality */
+static int __init register_test(const struct aty128fb_par *par)
+{
+	u32 val;
+	int flag = 0;
+
+	val = aty_ld_le32(BIOS_0_SCRATCH);
+
+	aty_st_le32(BIOS_0_SCRATCH, 0x55555555);
+	if (aty_ld_le32(BIOS_0_SCRATCH) == 0x55555555) {
+		aty_st_le32(BIOS_0_SCRATCH, 0xAAAAAAAA);
+
+		if (aty_ld_le32(BIOS_0_SCRATCH) == 0xAAAAAAAA)
+			flag = 1; 
+	}
+
+	aty_st_le32(BIOS_0_SCRATCH, val);	// restore value
+	return flag;
+}
+
+
+/*
+ * Accelerator engine functions
+ */
+static void do_wait_for_fifo(u16 entries, struct aty128fb_par *par)
+{
+	int i;
+
+	for (;;) {
+		for (i = 0; i < 2000000; i++) {
+			par->fifo_slots = aty_ld_le32(GUI_STAT) & 0x0fff;
+			if (par->fifo_slots >= entries)
+				return;
+		}
+		aty128_reset_engine(par);
+	}
+}
+
+
+static void wait_for_idle(struct aty128fb_par *par)
+{
+	int i;
+
+	do_wait_for_fifo(64, par);
+
+	for (;;) {
+		for (i = 0; i < 2000000; i++) {
+			if (!(aty_ld_le32(GUI_STAT) & (1 << 31))) {
+				aty128_flush_pixel_cache(par);
+				par->blitter_may_be_busy = 0;
+				return;
+			}
+		}
+		aty128_reset_engine(par);
+	}
+}
+
+
+static void wait_for_fifo(u16 entries, struct aty128fb_par *par)
+{
+	if (par->fifo_slots < entries)
+		do_wait_for_fifo(64, par);
+	par->fifo_slots -= entries;
+}
+
+
+static void aty128_flush_pixel_cache(const struct aty128fb_par *par)
+{
+	int i;
+	u32 tmp;
+
+	tmp = aty_ld_le32(PC_NGUI_CTLSTAT);
+	tmp &= ~(0x00ff);
+	tmp |= 0x00ff;
+	aty_st_le32(PC_NGUI_CTLSTAT, tmp);
+
+	for (i = 0; i < 2000000; i++)
+		if (!(aty_ld_le32(PC_NGUI_CTLSTAT) & PC_BUSY))
+			break;
+}
+
+
+static void aty128_reset_engine(const struct aty128fb_par *par)
+{
+	u32 gen_reset_cntl, clock_cntl_index, mclk_cntl;
+
+	aty128_flush_pixel_cache(par);
+
+	clock_cntl_index = aty_ld_le32(CLOCK_CNTL_INDEX);
+	mclk_cntl = aty_ld_pll(MCLK_CNTL);
+
+	aty_st_pll(MCLK_CNTL, mclk_cntl | 0x00030000);
+
+	gen_reset_cntl = aty_ld_le32(GEN_RESET_CNTL);
+	aty_st_le32(GEN_RESET_CNTL, gen_reset_cntl | SOFT_RESET_GUI);
+	aty_ld_le32(GEN_RESET_CNTL);
+	aty_st_le32(GEN_RESET_CNTL, gen_reset_cntl & ~(SOFT_RESET_GUI));
+	aty_ld_le32(GEN_RESET_CNTL);
+
+	aty_st_pll(MCLK_CNTL, mclk_cntl);
+	aty_st_le32(CLOCK_CNTL_INDEX, clock_cntl_index);
+	aty_st_le32(GEN_RESET_CNTL, gen_reset_cntl);
+
+	/* use old pio mode */
+	aty_st_le32(PM4_BUFFER_CNTL, PM4_BUFFER_CNTL_NONPM4);
+
+	DBG("engine reset");
+}
+
+
+static void aty128_init_engine(struct aty128fb_par *par)
+{
+	u32 pitch_value;
+
+	wait_for_idle(par);
+
+	/* 3D scaler not spoken here */
+	wait_for_fifo(1, par);
+	aty_st_le32(SCALE_3D_CNTL, 0x00000000);
+
+	aty128_reset_engine(par);
+
+	pitch_value = par->crtc.pitch;
+	if (par->crtc.bpp == 24) {
+		pitch_value = pitch_value * 3;
+	}
+
+	wait_for_fifo(4, par);
+	/* setup engine offset registers */
+	aty_st_le32(DEFAULT_OFFSET, 0x00000000);
+
+	/* setup engine pitch registers */
+	aty_st_le32(DEFAULT_PITCH, pitch_value);
+
+	/* set the default scissor register to max dimensions */
+	aty_st_le32(DEFAULT_SC_BOTTOM_RIGHT, (0x1FFF << 16) | 0x1FFF);
+
+	/* set the drawing controls registers */
+	aty_st_le32(DP_GUI_MASTER_CNTL,
+		    GMC_SRC_PITCH_OFFSET_DEFAULT		|
+		    GMC_DST_PITCH_OFFSET_DEFAULT		|
+		    GMC_SRC_CLIP_DEFAULT			|
+		    GMC_DST_CLIP_DEFAULT			|
+		    GMC_BRUSH_SOLIDCOLOR			|
+		    (depth_to_dst(par->crtc.depth) << 8)	|
+		    GMC_SRC_DSTCOLOR			|
+		    GMC_BYTE_ORDER_MSB_TO_LSB		|
+		    GMC_DP_CONVERSION_TEMP_6500		|
+		    ROP3_PATCOPY				|
+		    GMC_DP_SRC_RECT				|
+		    GMC_3D_FCN_EN_CLR			|
+		    GMC_DST_CLR_CMP_FCN_CLEAR		|
+		    GMC_AUX_CLIP_CLEAR			|
+		    GMC_WRITE_MASK_SET);
+
+	wait_for_fifo(8, par);
+	/* clear the line drawing registers */
+	aty_st_le32(DST_BRES_ERR, 0);
+	aty_st_le32(DST_BRES_INC, 0);
+	aty_st_le32(DST_BRES_DEC, 0);
+
+	/* set brush color registers */
+	aty_st_le32(DP_BRUSH_FRGD_CLR, 0xFFFFFFFF); /* white */
+	aty_st_le32(DP_BRUSH_BKGD_CLR, 0x00000000); /* black */
+
+	/* set source color registers */
+	aty_st_le32(DP_SRC_FRGD_CLR, 0xFFFFFFFF);   /* white */
+	aty_st_le32(DP_SRC_BKGD_CLR, 0x00000000);   /* black */
+
+	/* default write mask */
+	aty_st_le32(DP_WRITE_MASK, 0xFFFFFFFF);
+
+	/* Wait for all the writes to be completed before returning */
+	wait_for_idle(par);
+}
+
+
+/* convert depth values to their register representation */
+static u32 depth_to_dst(u32 depth)
+{
+	if (depth <= 8)
+		return DST_8BPP;
+	else if (depth <= 15)
+		return DST_15BPP;
+	else if (depth == 16)
+		return DST_16BPP;
+	else if (depth <= 24)
+		return DST_24BPP;
+	else if (depth <= 32)
+		return DST_32BPP;
+
+	return -EINVAL;
+}
+
+/*
+ * PLL informations retreival
+ */
+
+
+#ifndef __sparc__
+static void __iomem * __init aty128_map_ROM(const struct aty128fb_par *par, struct pci_dev *dev)
+{
+	u16 dptr;
+	u8 rom_type;
+	void __iomem *bios;
+	size_t rom_size;
+
+    	/* Fix from ATI for problem with Rage128 hardware not leaving ROM enabled */
+    	unsigned int temp;
+	temp = aty_ld_le32(RAGE128_MPP_TB_CONFIG);
+	temp &= 0x00ffffffu;
+	temp |= 0x04 << 24;
+	aty_st_le32(RAGE128_MPP_TB_CONFIG, temp);
+	temp = aty_ld_le32(RAGE128_MPP_TB_CONFIG);
+
+	bios = pci_map_rom(dev, &rom_size);
+
+	if (!bios) {
+		printk(KERN_ERR "aty128fb: ROM failed to map\n");
+		return NULL;
+	}
+
+	/* Very simple test to make sure it appeared */
+	if (BIOS_IN16(0) != 0xaa55) {
+		printk(KERN_ERR "aty128fb: Invalid ROM signature %x should be 0xaa55\n",
+		       BIOS_IN16(0));
+		goto failed;
+	}
+
+	/* Look for the PCI data to check the ROM type */
+	dptr = BIOS_IN16(0x18);
+
+	/* Check the PCI data signature. If it's wrong, we still assume a normal x86 ROM
+	 * for now, until I've verified this works everywhere. The goal here is more
+	 * to phase out Open Firmware images.
+	 *
+	 * Currently, we only look at the first PCI data, we could iteratre and deal with
+	 * them all, and we should use fb_bios_start relative to start of image and not
+	 * relative start of ROM, but so far, I never found a dual-image ATI card
+	 *
+	 * typedef struct {
+	 * 	u32	signature;	+ 0x00
+	 * 	u16	vendor;		+ 0x04
+	 * 	u16	device;		+ 0x06
+	 * 	u16	reserved_1;	+ 0x08
+	 * 	u16	dlen;		+ 0x0a
+	 * 	u8	drevision;	+ 0x0c
+	 * 	u8	class_hi;	+ 0x0d
+	 * 	u16	class_lo;	+ 0x0e
+	 * 	u16	ilen;		+ 0x10
+	 * 	u16	irevision;	+ 0x12
+	 * 	u8	type;		+ 0x14
+	 * 	u8	indicator;	+ 0x15
+	 * 	u16	reserved_2;	+ 0x16
+	 * } pci_data_t;
+	 */
+	if (BIOS_IN32(dptr) !=  (('R' << 24) | ('I' << 16) | ('C' << 8) | 'P')) {
+		printk(KERN_WARNING "aty128fb: PCI DATA signature in ROM incorrect: %08x\n",
+		       BIOS_IN32(dptr));
+		goto anyway;
+	}
+	rom_type = BIOS_IN8(dptr + 0x14);
+	switch(rom_type) {
+	case 0:
+		printk(KERN_INFO "aty128fb: Found Intel x86 BIOS ROM Image\n");
+		break;
+	case 1:
+		printk(KERN_INFO "aty128fb: Found Open Firmware ROM Image\n");
+		goto failed;
+	case 2:
+		printk(KERN_INFO "aty128fb: Found HP PA-RISC ROM Image\n");
+		goto failed;
+	default:
+		printk(KERN_INFO "aty128fb: Found unknown type %d ROM Image\n", rom_type);
+		goto failed;
+	}
+ anyway:
+	return bios;
+
+ failed:
+	pci_unmap_rom(dev, bios);
+	return NULL;
+}
+
+static void __init aty128_get_pllinfo(struct aty128fb_par *par, unsigned char __iomem *bios)
+{
+	unsigned int bios_hdr;
+	unsigned int bios_pll;
+
+	bios_hdr = BIOS_IN16(0x48);
+	bios_pll = BIOS_IN16(bios_hdr + 0x30);
+	
+	par->constants.ppll_max = BIOS_IN32(bios_pll + 0x16);
+	par->constants.ppll_min = BIOS_IN32(bios_pll + 0x12);
+	par->constants.xclk = BIOS_IN16(bios_pll + 0x08);
+	par->constants.ref_divider = BIOS_IN16(bios_pll + 0x10);
+	par->constants.ref_clk = BIOS_IN16(bios_pll + 0x0e);
+
+	DBG("ppll_max %d ppll_min %d xclk %d ref_divider %d ref clock %d\n",
+			par->constants.ppll_max, par->constants.ppll_min,
+			par->constants.xclk, par->constants.ref_divider,
+			par->constants.ref_clk);
+
+}           
+
+#ifdef CONFIG_X86
+static void __iomem *  __devinit aty128_find_mem_vbios(struct aty128fb_par *par)
+{
+	/* I simplified this code as we used to miss the signatures in
+	 * a lot of case. It's now closer to XFree, we just don't check
+	 * for signatures at all... Something better will have to be done
+	 * if we end up having conflicts
+	 */
+        u32  segstart;
+        unsigned char __iomem *rom_base = NULL;
+                                                
+        for (segstart=0x000c0000; segstart<0x000f0000; segstart+=0x00001000) {
+                rom_base = ioremap(segstart, 0x10000);
+		if (rom_base == NULL)
+			return NULL;
+		if (readb(rom_base) == 0x55 && readb(rom_base + 1) == 0xaa)
+	                break;
+                iounmap(rom_base);
+		rom_base = NULL;
+        }
+	return rom_base;
+}
+#endif
+#endif /* ndef(__sparc__) */
+
+/* fill in known card constants if pll_block is not available */
+static void __init aty128_timings(struct aty128fb_par *par)
+{
+#ifdef CONFIG_PPC_OF
+	/* instead of a table lookup, assume OF has properly
+	 * setup the PLL registers and use their values
+	 * to set the XCLK values and reference divider values */
+
+	u32 x_mpll_ref_fb_div;
+	u32 xclk_cntl;
+	u32 Nx, M;
+	unsigned PostDivSet[] = { 0, 1, 2, 4, 8, 3, 6, 12 };
+#endif
+
+	if (!par->constants.ref_clk)
+		par->constants.ref_clk = 2950;
+
+#ifdef CONFIG_PPC_OF
+	x_mpll_ref_fb_div = aty_ld_pll(X_MPLL_REF_FB_DIV);
+	xclk_cntl = aty_ld_pll(XCLK_CNTL) & 0x7;
+	Nx = (x_mpll_ref_fb_div & 0x00ff00) >> 8;
+	M  = x_mpll_ref_fb_div & 0x0000ff;
+
+	par->constants.xclk = round_div((2 * Nx * par->constants.ref_clk),
+					(M * PostDivSet[xclk_cntl]));
+
+	par->constants.ref_divider =
+		aty_ld_pll(PPLL_REF_DIV) & PPLL_REF_DIV_MASK;
+#endif
+
+	if (!par->constants.ref_divider) {
+		par->constants.ref_divider = 0x3b;
+
+		aty_st_pll(X_MPLL_REF_FB_DIV, 0x004c4c1e);
+		aty_pll_writeupdate(par);
+	}
+	aty_st_pll(PPLL_REF_DIV, par->constants.ref_divider);
+	aty_pll_writeupdate(par);
+
+	/* from documentation */
+	if (!par->constants.ppll_min)
+		par->constants.ppll_min = 12500;
+	if (!par->constants.ppll_max)
+		par->constants.ppll_max = 25000;    /* 23000 on some cards? */
+	if (!par->constants.xclk)
+		par->constants.xclk = 0x1d4d;	     /* same as mclk */
+
+	par->constants.fifo_width = 128;
+	par->constants.fifo_depth = 32;
+
+	switch (aty_ld_le32(MEM_CNTL) & 0x3) {
+	case 0:
+		par->mem = &sdr_128;
+		break;
+	case 1:
+		par->mem = &sdr_sgram;
+		break;
+	case 2:
+		par->mem = &ddr_sgram;
+		break;
+	default:
+		par->mem = &sdr_sgram;
+	}
+}
+
+
+
+/*
+ * CRTC programming
+ */
+
+/* Program the CRTC registers */
+static void aty128_set_crtc(const struct aty128_crtc *crtc,
+			    const struct aty128fb_par *par)
+{
+	aty_st_le32(CRTC_GEN_CNTL, crtc->gen_cntl);
+	aty_st_le32(CRTC_H_TOTAL_DISP, crtc->h_total);
+	aty_st_le32(CRTC_H_SYNC_STRT_WID, crtc->h_sync_strt_wid);
+	aty_st_le32(CRTC_V_TOTAL_DISP, crtc->v_total);
+	aty_st_le32(CRTC_V_SYNC_STRT_WID, crtc->v_sync_strt_wid);
+	aty_st_le32(CRTC_PITCH, crtc->pitch);
+	aty_st_le32(CRTC_OFFSET, crtc->offset);
+	aty_st_le32(CRTC_OFFSET_CNTL, crtc->offset_cntl);
+	/* Disable ATOMIC updating.  Is this the right place? */
+	aty_st_pll(PPLL_CNTL, aty_ld_pll(PPLL_CNTL) & ~(0x00030000));
+}
+
+
+static int aty128_var_to_crtc(const struct fb_var_screeninfo *var,
+			      struct aty128_crtc *crtc,
+			      const struct aty128fb_par *par)
+{
+	u32 xres, yres, vxres, vyres, xoffset, yoffset, bpp, dst;
+	u32 left, right, upper, lower, hslen, vslen, sync, vmode;
+	u32 h_total, h_disp, h_sync_strt, h_sync_wid, h_sync_pol;
+	u32 v_total, v_disp, v_sync_strt, v_sync_wid, v_sync_pol, c_sync;
+	u32 depth, bytpp;
+	u8 mode_bytpp[7] = { 0, 0, 1, 2, 2, 3, 4 };
+
+	/* input */
+	xres = var->xres;
+	yres = var->yres;
+	vxres   = var->xres_virtual;
+	vyres   = var->yres_virtual;
+	xoffset = var->xoffset;
+	yoffset = var->yoffset;
+	bpp   = var->bits_per_pixel;
+	left  = var->left_margin;
+	right = var->right_margin;
+	upper = var->upper_margin;
+	lower = var->lower_margin;
+	hslen = var->hsync_len;
+	vslen = var->vsync_len;
+	sync  = var->sync;
+	vmode = var->vmode;
+
+	if (bpp != 16)
+		depth = bpp;
+	else
+		depth = (var->green.length == 6) ? 16 : 15;
+
+	/* check for mode eligibility
+	 * accept only non interlaced modes */
+	if ((vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
+		return -EINVAL;
+
+	/* convert (and round up) and validate */
+	xres = (xres + 7) & ~7;
+	xoffset = (xoffset + 7) & ~7;
+
+	if (vxres < xres + xoffset)
+		vxres = xres + xoffset;
+
+	if (vyres < yres + yoffset)
+		vyres = yres + yoffset;
+
+	/* convert depth into ATI register depth */
+	dst = depth_to_dst(depth);
+
+	if (dst == -EINVAL) {
+		printk(KERN_ERR "aty128fb: Invalid depth or RGBA\n");
+		return -EINVAL;
+	}
+
+	/* convert register depth to bytes per pixel */
+	bytpp = mode_bytpp[dst];
+
+	/* make sure there is enough video ram for the mode */
+	if ((u32)(vxres * vyres * bytpp) > par->vram_size) {
+		printk(KERN_ERR "aty128fb: Not enough memory for mode\n");
+		return -EINVAL;
+	}
+
+	h_disp = (xres >> 3) - 1;
+	h_total = (((xres + right + hslen + left) >> 3) - 1) & 0xFFFFL;
+
+	v_disp = yres - 1;
+	v_total = (yres + upper + vslen + lower - 1) & 0xFFFFL;
+
+	/* check to make sure h_total and v_total are in range */
+	if (((h_total >> 3) - 1) > 0x1ff || (v_total - 1) > 0x7FF) {
+		printk(KERN_ERR "aty128fb: invalid width ranges\n");
+		return -EINVAL;
+	}
+
+	h_sync_wid = (hslen + 7) >> 3;
+	if (h_sync_wid == 0)
+		h_sync_wid = 1;
+	else if (h_sync_wid > 0x3f)        /* 0x3f = max hwidth */
+		h_sync_wid = 0x3f;
+
+	h_sync_strt = (h_disp << 3) + right;
+
+	v_sync_wid = vslen;
+	if (v_sync_wid == 0)
+		v_sync_wid = 1;
+	else if (v_sync_wid > 0x1f)        /* 0x1f = max vwidth */
+		v_sync_wid = 0x1f;
+    
+	v_sync_strt = v_disp + lower;
+
+	h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1;
+	v_sync_pol = sync & FB_SYNC_VERT_HIGH_ACT ? 0 : 1;
+    
+	c_sync = sync & FB_SYNC_COMP_HIGH_ACT ? (1 << 4) : 0;
+
+	crtc->gen_cntl = 0x3000000L | c_sync | (dst << 8);
+
+	crtc->h_total = h_total | (h_disp << 16);
+	crtc->v_total = v_total | (v_disp << 16);
+
+	crtc->h_sync_strt_wid = h_sync_strt | (h_sync_wid << 16) |
+	        (h_sync_pol << 23);
+	crtc->v_sync_strt_wid = v_sync_strt | (v_sync_wid << 16) |
+                (v_sync_pol << 23);
+
+	crtc->pitch = vxres >> 3;
+
+	crtc->offset = 0;
+
+	if ((var->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW)
+		crtc->offset_cntl = 0x00010000;
+	else
+		crtc->offset_cntl = 0;
+
+	crtc->vxres = vxres;
+	crtc->vyres = vyres;
+	crtc->xoffset = xoffset;
+	crtc->yoffset = yoffset;
+	crtc->depth = depth;
+	crtc->bpp = bpp;
+
+	return 0;
+}
+
+
+static int aty128_pix_width_to_var(int pix_width, struct fb_var_screeninfo *var)
+{
+
+	/* fill in pixel info */
+	var->red.msb_right = 0;
+	var->green.msb_right = 0;
+	var->blue.offset = 0;
+	var->blue.msb_right = 0;
+	var->transp.offset = 0;
+	var->transp.length = 0;
+	var->transp.msb_right = 0;
+	switch (pix_width) {
+	case CRTC_PIX_WIDTH_8BPP:
+		var->bits_per_pixel = 8;
+		var->red.offset = 0;
+		var->red.length = 8;
+		var->green.offset = 0;
+		var->green.length = 8;
+		var->blue.length = 8;
+		break;
+	case CRTC_PIX_WIDTH_15BPP:
+		var->bits_per_pixel = 16;
+		var->red.offset = 10;
+		var->red.length = 5;
+		var->green.offset = 5;
+		var->green.length = 5;
+		var->blue.length = 5;
+		break;
+	case CRTC_PIX_WIDTH_16BPP:
+		var->bits_per_pixel = 16;
+		var->red.offset = 11;
+		var->red.length = 5;
+		var->green.offset = 5;
+		var->green.length = 6;
+		var->blue.length = 5;
+		break;
+	case CRTC_PIX_WIDTH_24BPP:
+		var->bits_per_pixel = 24;
+		var->red.offset = 16;
+		var->red.length = 8;
+		var->green.offset = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		break;
+	case CRTC_PIX_WIDTH_32BPP:
+		var->bits_per_pixel = 32;
+		var->red.offset = 16;
+		var->red.length = 8;
+		var->green.offset = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		var->transp.offset = 24;
+		var->transp.length = 8;
+		break;
+	default:
+		printk(KERN_ERR "aty128fb: Invalid pixel width\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
+static int aty128_crtc_to_var(const struct aty128_crtc *crtc,
+			      struct fb_var_screeninfo *var)
+{
+	u32 xres, yres, left, right, upper, lower, hslen, vslen, sync;
+	u32 h_total, h_disp, h_sync_strt, h_sync_dly, h_sync_wid, h_sync_pol;
+	u32 v_total, v_disp, v_sync_strt, v_sync_wid, v_sync_pol, c_sync;
+	u32 pix_width;
+
+	/* fun with masking */
+	h_total     = crtc->h_total & 0x1ff;
+	h_disp      = (crtc->h_total >> 16) & 0xff;
+	h_sync_strt = (crtc->h_sync_strt_wid >> 3) & 0x1ff;
+	h_sync_dly  = crtc->h_sync_strt_wid & 0x7;
+	h_sync_wid  = (crtc->h_sync_strt_wid >> 16) & 0x3f;
+	h_sync_pol  = (crtc->h_sync_strt_wid >> 23) & 0x1;
+	v_total     = crtc->v_total & 0x7ff;
+	v_disp      = (crtc->v_total >> 16) & 0x7ff;
+	v_sync_strt = crtc->v_sync_strt_wid & 0x7ff;
+	v_sync_wid  = (crtc->v_sync_strt_wid >> 16) & 0x1f;
+	v_sync_pol  = (crtc->v_sync_strt_wid >> 23) & 0x1;
+	c_sync      = crtc->gen_cntl & CRTC_CSYNC_EN ? 1 : 0;
+	pix_width   = crtc->gen_cntl & CRTC_PIX_WIDTH_MASK;
+
+	/* do conversions */
+	xres  = (h_disp + 1) << 3;
+	yres  = v_disp + 1;
+	left  = ((h_total - h_sync_strt - h_sync_wid) << 3) - h_sync_dly;
+	right = ((h_sync_strt - h_disp) << 3) + h_sync_dly;
+	hslen = h_sync_wid << 3;
+	upper = v_total - v_sync_strt - v_sync_wid;
+	lower = v_sync_strt - v_disp;
+	vslen = v_sync_wid;
+	sync  = (h_sync_pol ? 0 : FB_SYNC_HOR_HIGH_ACT) |
+		(v_sync_pol ? 0 : FB_SYNC_VERT_HIGH_ACT) |
+		(c_sync ? FB_SYNC_COMP_HIGH_ACT : 0);
+
+	aty128_pix_width_to_var(pix_width, var);
+
+	var->xres = xres;
+	var->yres = yres;
+	var->xres_virtual = crtc->vxres;
+	var->yres_virtual = crtc->vyres;
+	var->xoffset = crtc->xoffset;
+	var->yoffset = crtc->yoffset;
+	var->left_margin  = left;
+	var->right_margin = right;
+	var->upper_margin = upper;
+	var->lower_margin = lower;
+	var->hsync_len = hslen;
+	var->vsync_len = vslen;
+	var->sync  = sync;
+	var->vmode = FB_VMODE_NONINTERLACED;
+
+	return 0;
+}
+
+#ifdef CONFIG_PMAC_PBOOK
+static void aty128_set_crt_enable(struct aty128fb_par *par, int on)
+{
+	if (on) {
+		aty_st_le32(CRTC_EXT_CNTL, aty_ld_le32(CRTC_EXT_CNTL) | CRT_CRTC_ON);
+		aty_st_le32(DAC_CNTL, (aty_ld_le32(DAC_CNTL) | DAC_PALETTE2_SNOOP_EN));
+	} else
+		aty_st_le32(CRTC_EXT_CNTL, aty_ld_le32(CRTC_EXT_CNTL) & ~CRT_CRTC_ON);
+}
+
+static void aty128_set_lcd_enable(struct aty128fb_par *par, int on)
+{
+	u32 reg;
+
+	if (on) {
+		reg = aty_ld_le32(LVDS_GEN_CNTL);
+		reg |= LVDS_ON | LVDS_EN | LVDS_BLON | LVDS_DIGION;
+		reg &= ~LVDS_DISPLAY_DIS;
+		aty_st_le32(LVDS_GEN_CNTL, reg);
+#ifdef CONFIG_PMAC_BACKLIGHT
+		aty128_set_backlight_enable(get_backlight_enable(),
+					    get_backlight_level(), par);
+#endif	
+	} else {
+#ifdef CONFIG_PMAC_BACKLIGHT
+		aty128_set_backlight_enable(0, 0, par);
+#endif	
+		reg = aty_ld_le32(LVDS_GEN_CNTL);
+		reg |= LVDS_DISPLAY_DIS;
+		aty_st_le32(LVDS_GEN_CNTL, reg);
+		mdelay(100);
+		reg &= ~(LVDS_ON /*| LVDS_EN*/);
+		aty_st_le32(LVDS_GEN_CNTL, reg);
+	}
+}
+#endif /* CONFIG_PMAC_PBOOK */
+
+static void aty128_set_pll(struct aty128_pll *pll, const struct aty128fb_par *par)
+{
+	u32 div3;
+
+	unsigned char post_conv[] =	/* register values for post dividers */
+        { 2, 0, 1, 4, 2, 2, 6, 2, 3, 2, 2, 2, 7 };
+
+	/* select PPLL_DIV_3 */
+	aty_st_le32(CLOCK_CNTL_INDEX, aty_ld_le32(CLOCK_CNTL_INDEX) | (3 << 8));
+
+	/* reset PLL */
+	aty_st_pll(PPLL_CNTL,
+		   aty_ld_pll(PPLL_CNTL) | PPLL_RESET | PPLL_ATOMIC_UPDATE_EN);
+
+	/* write the reference divider */
+	aty_pll_wait_readupdate(par);
+	aty_st_pll(PPLL_REF_DIV, par->constants.ref_divider & 0x3ff);
+	aty_pll_writeupdate(par);
+
+	div3 = aty_ld_pll(PPLL_DIV_3);
+	div3 &= ~PPLL_FB3_DIV_MASK;
+	div3 |= pll->feedback_divider;
+	div3 &= ~PPLL_POST3_DIV_MASK;
+	div3 |= post_conv[pll->post_divider] << 16;
+
+	/* write feedback and post dividers */
+	aty_pll_wait_readupdate(par);
+	aty_st_pll(PPLL_DIV_3, div3);
+	aty_pll_writeupdate(par);
+
+	aty_pll_wait_readupdate(par);
+	aty_st_pll(HTOTAL_CNTL, 0);	/* no horiz crtc adjustment */
+	aty_pll_writeupdate(par);
+
+	/* clear the reset, just in case */
+	aty_st_pll(PPLL_CNTL, aty_ld_pll(PPLL_CNTL) & ~PPLL_RESET);
+}
+
+
+static int aty128_var_to_pll(u32 period_in_ps, struct aty128_pll *pll,
+			     const struct aty128fb_par *par)
+{
+	const struct aty128_constants c = par->constants;
+	unsigned char post_dividers[] = {1,2,4,8,3,6,12};
+	u32 output_freq;
+	u32 vclk;        /* in .01 MHz */
+	int i;
+	u32 n, d;
+
+	vclk = 100000000 / period_in_ps;	/* convert units to 10 kHz */
+
+	/* adjust pixel clock if necessary */
+	if (vclk > c.ppll_max)
+		vclk = c.ppll_max;
+	if (vclk * 12 < c.ppll_min)
+		vclk = c.ppll_min/12;
+
+	/* now, find an acceptable divider */
+	for (i = 0; i < sizeof(post_dividers); i++) {
+		output_freq = post_dividers[i] * vclk;
+		if (output_freq >= c.ppll_min && output_freq <= c.ppll_max)
+			break;
+	}
+
+	/* calculate feedback divider */
+	n = c.ref_divider * output_freq;
+	d = c.ref_clk;
+
+	pll->post_divider = post_dividers[i];
+	pll->feedback_divider = round_div(n, d);
+	pll->vclk = vclk;
+
+	DBG("post %d feedback %d vlck %d output %d ref_divider %d "
+	    "vclk_per: %d\n", pll->post_divider,
+	    pll->feedback_divider, vclk, output_freq,
+	    c.ref_divider, period_in_ps);
+
+	return 0;
+}
+
+
+static int aty128_pll_to_var(const struct aty128_pll *pll, struct fb_var_screeninfo *var)
+{
+	var->pixclock = 100000000 / pll->vclk;
+
+	return 0;
+}
+
+
+static void aty128_set_fifo(const struct aty128_ddafifo *dsp,
+			    const struct aty128fb_par *par)
+{
+	aty_st_le32(DDA_CONFIG, dsp->dda_config);
+	aty_st_le32(DDA_ON_OFF, dsp->dda_on_off);
+}
+
+
+static int aty128_ddafifo(struct aty128_ddafifo *dsp,
+			  const struct aty128_pll *pll,
+			  u32 depth,
+			  const struct aty128fb_par *par)
+{
+	const struct aty128_meminfo *m = par->mem;
+	u32 xclk = par->constants.xclk;
+	u32 fifo_width = par->constants.fifo_width;
+	u32 fifo_depth = par->constants.fifo_depth;
+	s32 x, b, p, ron, roff;
+	u32 n, d, bpp;
+
+	/* round up to multiple of 8 */
+	bpp = (depth+7) & ~7;
+
+	n = xclk * fifo_width;
+	d = pll->vclk * bpp;
+	x = round_div(n, d);
+
+	ron = 4 * m->MB +
+		3 * ((m->Trcd - 2 > 0) ? m->Trcd - 2 : 0) +
+		2 * m->Trp +
+		m->Twr +
+		m->CL +
+		m->Tr2w +
+		x;
+
+	DBG("x %x\n", x);
+
+	b = 0;
+	while (x) {
+		x >>= 1;
+		b++;
+	}
+	p = b + 1;
+
+	ron <<= (11 - p);
+
+	n <<= (11 - p);
+	x = round_div(n, d);
+	roff = x * (fifo_depth - 4);
+
+	if ((ron + m->Rloop) >= roff) {
+		printk(KERN_ERR "aty128fb: Mode out of range!\n");
+		return -EINVAL;
+	}
+
+	DBG("p: %x rloop: %x x: %x ron: %x roff: %x\n",
+	    p, m->Rloop, x, ron, roff);
+
+	dsp->dda_config = p << 16 | m->Rloop << 20 | x;
+	dsp->dda_on_off = ron << 16 | roff;
+
+	return 0;
+}
+
+
+/*
+ * This actually sets the video mode.
+ */
+static int aty128fb_set_par(struct fb_info *info)
+{ 
+	struct aty128fb_par *par = info->par;
+	u32 config;
+	int err;
+
+	if ((err = aty128_decode_var(&info->var, par)) != 0)
+		return err;
+
+	if (par->blitter_may_be_busy)
+		wait_for_idle(par);
+
+	/* clear all registers that may interfere with mode setting */
+	aty_st_le32(OVR_CLR, 0);
+	aty_st_le32(OVR_WID_LEFT_RIGHT, 0);
+	aty_st_le32(OVR_WID_TOP_BOTTOM, 0);
+	aty_st_le32(OV0_SCALE_CNTL, 0);
+	aty_st_le32(MPP_TB_CONFIG, 0);
+	aty_st_le32(MPP_GP_CONFIG, 0);
+	aty_st_le32(SUBPIC_CNTL, 0);
+	aty_st_le32(VIPH_CONTROL, 0);
+	aty_st_le32(I2C_CNTL_1, 0);         /* turn off i2c */
+	aty_st_le32(GEN_INT_CNTL, 0);	/* turn off interrupts */
+	aty_st_le32(CAP0_TRIG_CNTL, 0);
+	aty_st_le32(CAP1_TRIG_CNTL, 0);
+
+	aty_st_8(CRTC_EXT_CNTL + 1, 4);	/* turn video off */
+
+	aty128_set_crtc(&par->crtc, par);
+	aty128_set_pll(&par->pll, par);
+	aty128_set_fifo(&par->fifo_reg, par);
+
+	config = aty_ld_le32(CONFIG_CNTL) & ~3;
+
+#if defined(__BIG_ENDIAN)
+	if (par->crtc.bpp == 32)
+		config |= 2;	/* make aperture do 32 bit swapping */
+	else if (par->crtc.bpp == 16)
+		config |= 1;	/* make aperture do 16 bit swapping */
+#endif
+
+	aty_st_le32(CONFIG_CNTL, config);
+	aty_st_8(CRTC_EXT_CNTL + 1, 0);	/* turn the video back on */
+
+	info->fix.line_length = (par->crtc.vxres * par->crtc.bpp) >> 3;
+	info->fix.visual = par->crtc.bpp == 8 ? FB_VISUAL_PSEUDOCOLOR
+		: FB_VISUAL_DIRECTCOLOR;
+
+#ifdef CONFIG_PMAC_PBOOK
+	if (par->chip_gen == rage_M3) {
+		aty128_set_crt_enable(par, par->crt_on);
+		aty128_set_lcd_enable(par, par->lcd_on);
+	}
+#endif
+	if (par->accel_flags & FB_ACCELF_TEXT)
+		aty128_init_engine(par);
+
+#ifdef CONFIG_BOOTX_TEXT
+	btext_update_display(info->fix.smem_start,
+			     (((par->crtc.h_total>>16) & 0xff)+1)*8,
+			     ((par->crtc.v_total>>16) & 0x7ff)+1,
+			     par->crtc.bpp,
+			     par->crtc.vxres*par->crtc.bpp/8);
+#endif /* CONFIG_BOOTX_TEXT */
+
+	return 0;
+}
+
+/*
+ *  encode/decode the User Defined Part of the Display
+ */
+
+static int aty128_decode_var(struct fb_var_screeninfo *var, struct aty128fb_par *par)
+{
+	int err;
+	struct aty128_crtc crtc;
+	struct aty128_pll pll;
+	struct aty128_ddafifo fifo_reg;
+
+	if ((err = aty128_var_to_crtc(var, &crtc, par)))
+		return err;
+
+	if ((err = aty128_var_to_pll(var->pixclock, &pll, par)))
+		return err;
+
+	if ((err = aty128_ddafifo(&fifo_reg, &pll, crtc.depth, par)))
+		return err;
+
+	par->crtc = crtc;
+	par->pll = pll;
+	par->fifo_reg = fifo_reg;
+	par->accel_flags = var->accel_flags;
+
+	return 0;
+}
+
+
+static int aty128_encode_var(struct fb_var_screeninfo *var,
+			     const struct aty128fb_par *par)
+{
+	int err;
+
+	if ((err = aty128_crtc_to_var(&par->crtc, var)))
+		return err;
+
+	if ((err = aty128_pll_to_var(&par->pll, var)))
+		return err;
+
+	var->nonstd = 0;
+	var->activate = 0;
+
+	var->height = -1;
+	var->width = -1;
+	var->accel_flags = par->accel_flags;
+
+	return 0;
+}           
+
+
+static int aty128fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	struct aty128fb_par par;
+	int err;
+
+	par = *(struct aty128fb_par *)info->par;
+	if ((err = aty128_decode_var(var, &par)) != 0)
+		return err;
+	aty128_encode_var(var, &par);
+	return 0;
+}
+
+
+/*
+ *  Pan or Wrap the Display
+ */
+static int aty128fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fb) 
+{
+	struct aty128fb_par *par = fb->par;
+	u32 xoffset, yoffset;
+	u32 offset;
+	u32 xres, yres;
+
+	xres = (((par->crtc.h_total >> 16) & 0xff) + 1) << 3;
+	yres = ((par->crtc.v_total >> 16) & 0x7ff) + 1;
+
+	xoffset = (var->xoffset +7) & ~7;
+	yoffset = var->yoffset;
+
+	if (xoffset+xres > par->crtc.vxres || yoffset+yres > par->crtc.vyres)
+		return -EINVAL;
+
+	par->crtc.xoffset = xoffset;
+	par->crtc.yoffset = yoffset;
+
+	offset = ((yoffset * par->crtc.vxres + xoffset)*(par->crtc.bpp >> 3)) & ~7;
+
+	if (par->crtc.bpp == 24)
+		offset += 8 * (offset % 3); /* Must be multiple of 8 and 3 */
+
+	aty_st_le32(CRTC_OFFSET, offset);
+
+	return 0;
+}
+
+
+/*
+ *  Helper function to store a single palette register
+ */
+static void aty128_st_pal(u_int regno, u_int red, u_int green, u_int blue,
+			  struct aty128fb_par *par)
+{
+	if (par->chip_gen == rage_M3) {
+#if 0
+		/* Note: For now, on M3, we set palette on both heads, which may
+		 * be useless. Can someone with a M3 check this ?
+		 * 
+		 * This code would still be useful if using the second CRTC to 
+		 * do mirroring
+		 */
+
+		aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) | DAC_PALETTE_ACCESS_CNTL);
+		aty_st_8(PALETTE_INDEX, regno);
+		aty_st_le32(PALETTE_DATA, (red<<16)|(green<<8)|blue);
+#endif
+		aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) & ~DAC_PALETTE_ACCESS_CNTL);
+	}
+
+	aty_st_8(PALETTE_INDEX, regno);
+	aty_st_le32(PALETTE_DATA, (red<<16)|(green<<8)|blue);
+}
+
+static int aty128fb_sync(struct fb_info *info)
+{
+	struct aty128fb_par *par = info->par;
+
+	if (par->blitter_may_be_busy)
+		wait_for_idle(par);
+	return 0;
+}
+
+#ifndef MODULE
+static int __init aty128fb_setup(char *options)
+{
+	char *this_opt;
+
+	if (!options || !*options)
+		return 0;
+
+	while ((this_opt = strsep(&options, ",")) != NULL) {
+#ifdef CONFIG_PMAC_PBOOK
+		if (!strncmp(this_opt, "lcd:", 4)) {
+			default_lcd_on = simple_strtoul(this_opt+4, NULL, 0);
+			continue;
+		} else if (!strncmp(this_opt, "crt:", 4)) {
+			default_crt_on = simple_strtoul(this_opt+4, NULL, 0);
+			continue;
+		}
+#endif
+#ifdef CONFIG_MTRR
+		if(!strncmp(this_opt, "nomtrr", 6)) {
+			mtrr = 0;
+			continue;
+		}
+#endif
+#ifdef CONFIG_PPC_PMAC
+		/* vmode and cmode deprecated */
+		if (!strncmp(this_opt, "vmode:", 6)) {
+			unsigned int vmode = simple_strtoul(this_opt+6, NULL, 0);
+			if (vmode > 0 && vmode <= VMODE_MAX)
+				default_vmode = vmode;
+			continue;
+		} else if (!strncmp(this_opt, "cmode:", 6)) {
+			unsigned int cmode = simple_strtoul(this_opt+6, NULL, 0);
+			switch (cmode) {
+			case 0:
+			case 8:
+				default_cmode = CMODE_8;
+				break;
+			case 15:
+			case 16:
+				default_cmode = CMODE_16;
+				break;
+			case 24:
+			case 32:
+				default_cmode = CMODE_32;
+				break;
+			}
+			continue;
+		}
+#endif /* CONFIG_PPC_PMAC */
+		mode_option = this_opt;
+	}
+	return 0;
+}
+#endif  /*  MODULE  */
+
+
+/*
+ *  Initialisation
+ */
+
+#ifdef CONFIG_PPC_PMAC
+static void aty128_early_resume(void *data)
+{
+        struct aty128fb_par *par = data;
+
+	if (try_acquire_console_sem())
+		return;
+	aty128_do_resume(par->pdev);
+	release_console_sem();
+}
+#endif /* CONFIG_PPC_PMAC */
+
+static int __init aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	struct fb_info *info = pci_get_drvdata(pdev);
+	struct aty128fb_par *par = info->par;
+	struct fb_var_screeninfo var;
+	char video_card[DEVICE_NAME_SIZE];
+	u8 chip_rev;
+	u32 dac;
+
+	if (!par->vram_size)	/* may have already been probed */
+		par->vram_size = aty_ld_le32(CONFIG_MEMSIZE) & 0x03FFFFFF;
+
+	/* Get the chip revision */
+	chip_rev = (aty_ld_le32(CONFIG_CNTL) >> 16) & 0x1F;
+
+	strcpy(video_card, "Rage128 XX ");
+	video_card[8] = ent->device >> 8;
+	video_card[9] = ent->device & 0xFF;
+	    
+	/* range check to make sure */
+	if (ent->driver_data < (sizeof(r128_family)/sizeof(char *)))
+	    strncat(video_card, r128_family[ent->driver_data], sizeof(video_card));
+
+	printk(KERN_INFO "aty128fb: %s [chip rev 0x%x] ", video_card, chip_rev);
+
+	if (par->vram_size % (1024 * 1024) == 0)
+		printk("%dM %s\n", par->vram_size / (1024*1024), par->mem->name);
+	else
+		printk("%dk %s\n", par->vram_size / 1024, par->mem->name);
+
+	par->chip_gen = ent->driver_data;
+
+	/* fill in info */
+	info->fbops = &aty128fb_ops;
+	info->flags = FBINFO_FLAG_DEFAULT;
+
+#ifdef CONFIG_PMAC_PBOOK
+	par->lcd_on = default_lcd_on;
+	par->crt_on = default_crt_on;
+#endif
+
+	var = default_var;
+#ifdef CONFIG_PPC_PMAC
+	if (_machine == _MACH_Pmac) {
+		/* Indicate sleep capability */
+		if (par->chip_gen == rage_M3) {
+			pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1);
+			pmac_set_early_video_resume(aty128_early_resume, par);
+		}
+
+		/* Find default mode */
+		if (mode_option) {
+			if (!mac_find_mode(&var, info, mode_option, 8))
+				var = default_var;
+		} else {
+			if (default_vmode <= 0 || default_vmode > VMODE_MAX)
+				default_vmode = VMODE_1024_768_60;
+
+			/* iMacs need that resolution
+			 * PowerMac2,1 first r128 iMacs
+			 * PowerMac2,2 summer 2000 iMacs
+			 * PowerMac4,1 january 2001 iMacs "flower power"
+			 */
+			if (machine_is_compatible("PowerMac2,1") ||
+			    machine_is_compatible("PowerMac2,2") ||
+			    machine_is_compatible("PowerMac4,1"))
+				default_vmode = VMODE_1024_768_75;
+
+			/* iBook SE */
+			if (machine_is_compatible("PowerBook2,2"))
+				default_vmode = VMODE_800_600_60;
+
+			/* PowerBook Firewire (Pismo), iBook Dual USB */
+			if (machine_is_compatible("PowerBook3,1") ||
+			    machine_is_compatible("PowerBook4,1"))
+				default_vmode = VMODE_1024_768_60;
+
+			/* PowerBook Titanium */
+			if (machine_is_compatible("PowerBook3,2"))
+				default_vmode = VMODE_1152_768_60;
+	
+			if (default_cmode > 16) 
+			    default_cmode = CMODE_32;
+			else if (default_cmode > 8) 
+			    default_cmode = CMODE_16;
+			else 
+			    default_cmode = CMODE_8;
+
+			if (mac_vmode_to_var(default_vmode, default_cmode, &var))
+				var = default_var;
+		}
+	} else
+#endif /* CONFIG_PPC_PMAC */
+	{
+		if (mode_option)
+			if (fb_find_mode(&var, info, mode_option, NULL, 
+					 0, &defaultmode, 8) == 0)
+				var = default_var;
+	}
+
+	var.accel_flags &= ~FB_ACCELF_TEXT;
+//	var.accel_flags |= FB_ACCELF_TEXT;/* FIXME Will add accel later */
+
+	if (aty128fb_check_var(&var, info)) {
+		printk(KERN_ERR "aty128fb: Cannot set default mode.\n");
+		return 0;
+	}
+
+	/* setup the DAC the way we like it */
+	dac = aty_ld_le32(DAC_CNTL);
+	dac |= (DAC_8BIT_EN | DAC_RANGE_CNTL);
+	dac |= DAC_MASK;
+	if (par->chip_gen == rage_M3)
+		dac |= DAC_PALETTE2_SNOOP_EN;
+	aty_st_le32(DAC_CNTL, dac);
+
+	/* turn off bus mastering, just in case */
+	aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL) | BUS_MASTER_DIS);
+
+	info->var = var;
+	fb_alloc_cmap(&info->cmap, 256, 0);
+
+	var.activate = FB_ACTIVATE_NOW;
+
+	aty128_init_engine(par);
+
+	if (register_framebuffer(info) < 0)
+		return 0;
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+	/* Could be extended to Rage128Pro LVDS output too */
+	if (par->chip_gen == rage_M3)
+		register_backlight_controller(&aty128_backlight_controller, par, "ati");
+#endif /* CONFIG_PMAC_BACKLIGHT */
+
+	par->pm_reg = pci_find_capability(pdev, PCI_CAP_ID_PM);
+	par->pdev = pdev;
+	par->asleep = 0;
+	par->lock_blank = 0;
+	
+	printk(KERN_INFO "fb%d: %s frame buffer device on %s\n",
+	       info->node, info->fix.id, video_card);
+
+	return 1;	/* success! */
+}
+
+#ifdef CONFIG_PCI
+/* register a card    ++ajoshi */
+static int __init aty128_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	unsigned long fb_addr, reg_addr;
+	struct aty128fb_par *par;
+	struct fb_info *info;
+	int err;
+#ifndef __sparc__
+	void __iomem *bios = NULL;
+#endif
+
+	/* Enable device in PCI config */
+	if ((err = pci_enable_device(pdev))) {
+		printk(KERN_ERR "aty128fb: Cannot enable PCI device: %d\n",
+				err);
+		return -ENODEV;
+	}
+
+	fb_addr = pci_resource_start(pdev, 0);
+	if (!request_mem_region(fb_addr, pci_resource_len(pdev, 0),
+				"aty128fb FB")) {
+		printk(KERN_ERR "aty128fb: cannot reserve frame "
+				"buffer memory\n");
+		return -ENODEV;
+	}
+
+	reg_addr = pci_resource_start(pdev, 2);
+	if (!request_mem_region(reg_addr, pci_resource_len(pdev, 2),
+				"aty128fb MMIO")) {
+		printk(KERN_ERR "aty128fb: cannot reserve MMIO region\n");
+		goto err_free_fb;
+	}
+
+	/* We have the resources. Now virtualize them */
+	info = framebuffer_alloc(sizeof(struct aty128fb_par), &pdev->dev);
+	if (info == NULL) {
+		printk(KERN_ERR "aty128fb: can't alloc fb_info_aty128\n");
+		goto err_free_mmio;
+	}
+	par = info->par;
+
+	info->pseudo_palette = par->pseudo_palette;
+	info->fix = aty128fb_fix;
+
+	/* Virtualize mmio region */
+	info->fix.mmio_start = reg_addr;
+	par->regbase = ioremap(reg_addr, pci_resource_len(pdev, 2));
+	if (!par->regbase)
+		goto err_free_info;
+
+	/* Grab memory size from the card */
+	// How does this relate to the resource length from the PCI hardware?
+	par->vram_size = aty_ld_le32(CONFIG_MEMSIZE) & 0x03FFFFFF;
+
+	/* Virtualize the framebuffer */
+	info->screen_base = ioremap(fb_addr, par->vram_size);
+	if (!info->screen_base)
+		goto err_unmap_out;
+
+	/* Set up info->fix */
+	info->fix = aty128fb_fix;
+	info->fix.smem_start = fb_addr;
+	info->fix.smem_len = par->vram_size;
+	info->fix.mmio_start = reg_addr;
+
+	/* If we can't test scratch registers, something is seriously wrong */
+	if (!register_test(par)) {
+		printk(KERN_ERR "aty128fb: Can't write to video register!\n");
+		goto err_out;
+	}
+
+#ifndef __sparc__
+	bios = aty128_map_ROM(par, pdev);
+#ifdef CONFIG_X86
+	if (bios == NULL)
+		bios = aty128_find_mem_vbios(par);
+#endif
+	if (bios == NULL)
+		printk(KERN_INFO "aty128fb: BIOS not located, guessing timings.\n");
+	else {
+		printk(KERN_INFO "aty128fb: Rage128 BIOS located\n");
+		aty128_get_pllinfo(par, bios);
+		pci_unmap_rom(pdev, bios);
+	}
+#endif /* __sparc__ */
+
+	aty128_timings(par);
+	pci_set_drvdata(pdev, info);
+
+	if (!aty128_init(pdev, ent))
+		goto err_out;
+
+#ifdef CONFIG_MTRR
+	if (mtrr) {
+		par->mtrr.vram = mtrr_add(info->fix.smem_start,
+				par->vram_size, MTRR_TYPE_WRCOMB, 1);
+		par->mtrr.vram_valid = 1;
+		/* let there be speed */
+		printk(KERN_INFO "aty128fb: Rage128 MTRR set to ON\n");
+	}
+#endif /* CONFIG_MTRR */
+	return 0;
+
+err_out:
+	iounmap(info->screen_base);
+err_unmap_out:
+	iounmap(par->regbase);
+err_free_info:
+	framebuffer_release(info);
+err_free_mmio:
+	release_mem_region(pci_resource_start(pdev, 2),
+			pci_resource_len(pdev, 2));
+err_free_fb:
+	release_mem_region(pci_resource_start(pdev, 0),
+			pci_resource_len(pdev, 0));
+	return -ENODEV;
+}
+
+static void __devexit aty128_remove(struct pci_dev *pdev)
+{
+	struct fb_info *info = pci_get_drvdata(pdev);
+	struct aty128fb_par *par;
+
+	if (!info)
+		return;
+
+	par = info->par;
+
+	unregister_framebuffer(info);
+#ifdef CONFIG_MTRR
+	if (par->mtrr.vram_valid)
+		mtrr_del(par->mtrr.vram, info->fix.smem_start,
+			 par->vram_size);
+#endif /* CONFIG_MTRR */
+	iounmap(par->regbase);
+	iounmap(info->screen_base);
+
+	release_mem_region(pci_resource_start(pdev, 0),
+			   pci_resource_len(pdev, 0));
+	release_mem_region(pci_resource_start(pdev, 2),
+			   pci_resource_len(pdev, 2));
+	framebuffer_release(info);
+}
+#endif /* CONFIG_PCI */
+
+
+
+    /*
+     *  Blank the display.
+     */
+static int aty128fb_blank(int blank, struct fb_info *fb)
+{
+	struct aty128fb_par *par = fb->par;
+	u8 state = 0;
+
+	if (par->lock_blank || par->asleep)
+		return 0;
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+	if ((_machine == _MACH_Pmac) && blank)
+		set_backlight_enable(0);
+#endif /* CONFIG_PMAC_BACKLIGHT */
+
+	if (blank & FB_BLANK_VSYNC_SUSPEND)
+		state |= 2;
+	if (blank & FB_BLANK_HSYNC_SUSPEND)
+		state |= 1;
+	if (blank & FB_BLANK_POWERDOWN)
+		state |= 4;
+
+	aty_st_8(CRTC_EXT_CNTL+1, state);
+
+#ifdef CONFIG_PMAC_PBOOK
+	if (par->chip_gen == rage_M3) {
+		aty128_set_crt_enable(par, par->crt_on && !blank);
+		aty128_set_lcd_enable(par, par->lcd_on && !blank);
+	}
+#endif	
+#ifdef CONFIG_PMAC_BACKLIGHT
+	if ((_machine == _MACH_Pmac) && !blank)
+		set_backlight_enable(1);
+#endif /* CONFIG_PMAC_BACKLIGHT */
+	return 0;
+}
+
+/*
+ *  Set a single color register. The values supplied are already
+ *  rounded down to the hardware's capabilities (according to the
+ *  entries in the var structure). Return != 0 for invalid regno.
+ */
+static int aty128fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+			      u_int transp, struct fb_info *info)
+{
+	struct aty128fb_par *par = info->par;
+
+	if (regno > 255
+	    || (par->crtc.depth == 16 && regno > 63)
+	    || (par->crtc.depth == 15 && regno > 31))
+		return 1;
+
+	red >>= 8;
+	green >>= 8;
+	blue >>= 8;
+
+	if (regno < 16) {
+		int i;
+		u32 *pal = info->pseudo_palette;
+
+		switch (par->crtc.depth) {
+		case 15:
+			pal[regno] = (regno << 10) | (regno << 5) | regno;
+			break;
+		case 16:
+			pal[regno] = (regno << 11) | (regno << 6) | regno;
+			break;
+		case 24:
+			pal[regno] = (regno << 16) | (regno << 8) | regno;
+			break;
+		case 32:
+			i = (regno << 8) | regno;
+			pal[regno] = (i << 16) | i;
+			break;
+		}
+	}
+
+	if (par->crtc.depth == 16 && regno > 0) {
+		/*
+		 * With the 5-6-5 split of bits for RGB at 16 bits/pixel, we
+		 * have 32 slots for R and B values but 64 slots for G values.
+		 * Thus the R and B values go in one slot but the G value
+		 * goes in a different slot, and we have to avoid disturbing
+		 * the other fields in the slots we touch.
+		 */
+		par->green[regno] = green;
+		if (regno < 32) {
+			par->red[regno] = red;
+			par->blue[regno] = blue;
+			aty128_st_pal(regno * 8, red, par->green[regno*2],
+				      blue, par);
+		}
+		red = par->red[regno/2];
+		blue = par->blue[regno/2];
+		regno <<= 2;
+	} else if (par->crtc.bpp == 16)
+		regno <<= 3;
+	aty128_st_pal(regno, red, green, blue, par);
+
+	return 0;
+}
+
+#define ATY_MIRROR_LCD_ON	0x00000001
+#define ATY_MIRROR_CRT_ON	0x00000002
+
+/* out param: u32*	backlight value: 0 to 15 */
+#define FBIO_ATY128_GET_MIRROR	_IOR('@', 1, __u32)
+/* in param: u32*	backlight value: 0 to 15 */
+#define FBIO_ATY128_SET_MIRROR	_IOW('@', 2, __u32)
+
+static int aty128fb_ioctl(struct inode *inode, struct file *file, u_int cmd,
+			  u_long arg, struct fb_info *info)
+{
+#ifdef CONFIG_PMAC_PBOOK
+	struct aty128fb_par *par = info->par;
+	u32 value;
+	int rc;
+    
+	switch (cmd) {
+	case FBIO_ATY128_SET_MIRROR:
+		if (par->chip_gen != rage_M3)
+			return -EINVAL;
+		rc = get_user(value, (__u32 __user *)arg);
+		if (rc)
+			return rc;
+		par->lcd_on = (value & 0x01) != 0;
+		par->crt_on = (value & 0x02) != 0;
+		if (!par->crt_on && !par->lcd_on)
+			par->lcd_on = 1;
+		aty128_set_crt_enable(par, par->crt_on);	
+		aty128_set_lcd_enable(par, par->lcd_on);	
+		return 0;
+	case FBIO_ATY128_GET_MIRROR:
+		if (par->chip_gen != rage_M3)
+			return -EINVAL;
+		value = (par->crt_on << 1) | par->lcd_on;
+		return put_user(value, (__u32 __user *)arg);
+	}
+#endif
+	return -EINVAL;
+}
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+static int backlight_conv[] = {
+	0xff, 0xc0, 0xb5, 0xaa, 0x9f, 0x94, 0x89, 0x7e,
+	0x73, 0x68, 0x5d, 0x52, 0x47, 0x3c, 0x31, 0x24
+};
+
+/* We turn off the LCD completely instead of just dimming the backlight.
+ * This provides greater power saving and the display is useless without
+ * backlight anyway
+ */
+#define BACKLIGHT_LVDS_OFF
+/* That one prevents proper CRT output with LCD off */
+#undef BACKLIGHT_DAC_OFF
+
+static int aty128_set_backlight_enable(int on, int level, void *data)
+{
+	struct aty128fb_par *par = data;
+	unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL);
+
+	if (!par->lcd_on)
+		on = 0;
+	reg |= LVDS_BL_MOD_EN | LVDS_BLON;
+	if (on && level > BACKLIGHT_OFF) {
+		reg |= LVDS_DIGION;
+		if (!(reg & LVDS_ON)) {
+			reg &= ~LVDS_BLON;
+			aty_st_le32(LVDS_GEN_CNTL, reg);
+			(void)aty_ld_le32(LVDS_GEN_CNTL);
+			mdelay(10);
+			reg |= LVDS_BLON;
+			aty_st_le32(LVDS_GEN_CNTL, reg);
+		}
+		reg &= ~LVDS_BL_MOD_LEVEL_MASK;
+		reg |= (backlight_conv[level] << LVDS_BL_MOD_LEVEL_SHIFT);
+#ifdef BACKLIGHT_LVDS_OFF
+		reg |= LVDS_ON | LVDS_EN;
+		reg &= ~LVDS_DISPLAY_DIS;
+#endif
+		aty_st_le32(LVDS_GEN_CNTL, reg);
+#ifdef BACKLIGHT_DAC_OFF
+		aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) & (~DAC_PDWN));
+#endif		
+	} else {
+		reg &= ~LVDS_BL_MOD_LEVEL_MASK;
+		reg |= (backlight_conv[0] << LVDS_BL_MOD_LEVEL_SHIFT);
+#ifdef BACKLIGHT_LVDS_OFF
+		reg |= LVDS_DISPLAY_DIS;
+		aty_st_le32(LVDS_GEN_CNTL, reg);
+		(void)aty_ld_le32(LVDS_GEN_CNTL);
+		udelay(10);
+		reg &= ~(LVDS_ON | LVDS_EN | LVDS_BLON | LVDS_DIGION);
+#endif		
+		aty_st_le32(LVDS_GEN_CNTL, reg);
+#ifdef BACKLIGHT_DAC_OFF
+		aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) | DAC_PDWN);
+#endif		
+	}
+
+	return 0;
+}
+
+static int aty128_set_backlight_level(int level, void* data)
+{
+	return aty128_set_backlight_enable(1, level, data);
+}
+#endif /* CONFIG_PMAC_BACKLIGHT */
+
+#if 0
+    /*
+     *  Accelerated functions
+     */
+
+static inline void aty128_rectcopy(int srcx, int srcy, int dstx, int dsty,
+				   u_int width, u_int height,
+				   struct fb_info_aty128 *par)
+{
+    u32 save_dp_datatype, save_dp_cntl, dstval;
+
+    if (!width || !height)
+        return;
+
+    dstval = depth_to_dst(par->current_par.crtc.depth);
+    if (dstval == DST_24BPP) {
+        srcx *= 3;
+        dstx *= 3;
+        width *= 3;
+    } else if (dstval == -EINVAL) {
+        printk("aty128fb: invalid depth or RGBA\n");
+        return;
+    }
+
+    wait_for_fifo(2, par);
+    save_dp_datatype = aty_ld_le32(DP_DATATYPE);
+    save_dp_cntl     = aty_ld_le32(DP_CNTL);
+
+    wait_for_fifo(6, par);
+    aty_st_le32(SRC_Y_X, (srcy << 16) | srcx);
+    aty_st_le32(DP_MIX, ROP3_SRCCOPY | DP_SRC_RECT);
+    aty_st_le32(DP_CNTL, DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM);
+    aty_st_le32(DP_DATATYPE, save_dp_datatype | dstval | SRC_DSTCOLOR);
+
+    aty_st_le32(DST_Y_X, (dsty << 16) | dstx);
+    aty_st_le32(DST_HEIGHT_WIDTH, (height << 16) | width);
+
+    par->blitter_may_be_busy = 1;
+
+    wait_for_fifo(2, par);
+    aty_st_le32(DP_DATATYPE, save_dp_datatype);
+    aty_st_le32(DP_CNTL, save_dp_cntl); 
+}
+
+
+    /*
+     * Text mode accelerated functions
+     */
+
+static void fbcon_aty128_bmove(struct display *p, int sy, int sx, int dy, int dx,
+			int height, int width)
+{
+    sx     *= fontwidth(p);
+    sy     *= fontheight(p);
+    dx     *= fontwidth(p);
+    dy     *= fontheight(p);
+    width  *= fontwidth(p);
+    height *= fontheight(p);
+
+    aty128_rectcopy(sx, sy, dx, dy, width, height,
+			(struct fb_info_aty128 *)p->fb_info);
+}
+#endif /* 0 */
+
+static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
+{
+	u32	pmgt;
+	u16	pwr_command;
+	struct pci_dev *pdev = par->pdev;
+
+	if (!par->pm_reg)
+		return;
+		
+	/* Set the chip into the appropriate suspend mode (we use D2,
+	 * D3 would require a complete re-initialisation of the chip,
+	 * including PCI config registers, clocks, AGP configuration, ...)
+	 */
+	if (suspend) {
+		/* Make sure CRTC2 is reset. Remove that the day we decide to
+		 * actually use CRTC2 and replace it with real code for disabling
+		 * the CRTC2 output during sleep
+		 */
+		aty_st_le32(CRTC2_GEN_CNTL, aty_ld_le32(CRTC2_GEN_CNTL) &
+			~(CRTC2_EN));
+
+		/* Set the power management mode to be PCI based */
+		/* Use this magic value for now */
+		pmgt = 0x0c005407;
+		aty_st_pll(POWER_MANAGEMENT, pmgt);
+		(void)aty_ld_pll(POWER_MANAGEMENT);
+		aty_st_le32(BUS_CNTL1, 0x00000010);
+		aty_st_le32(MEM_POWER_MISC, 0x0c830000);
+		mdelay(100);
+		pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+		/* Switch PCI power management to D2 */
+		pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL,
+			(pwr_command & ~PCI_PM_CTRL_STATE_MASK) | 2);
+		pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+	} else {
+		/* Switch back PCI power management to D0 */
+		mdelay(100);
+		pci_write_config_word(pdev, par->pm_reg+PCI_PM_CTRL, 0);
+		pci_read_config_word(pdev, par->pm_reg+PCI_PM_CTRL, &pwr_command);
+		mdelay(100);
+	}
+}
+
+static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct fb_info *info = pci_get_drvdata(pdev);
+	struct aty128fb_par *par = info->par;
+	u8 agp;
+
+	/* We don't do anything but D2, for now we return 0, but
+	 * we may want to change that. How do we know if the BIOS
+	 * can properly take care of D3 ? Also, with swsusp, we
+	 * know we'll be rebooted, ...
+	 */
+#ifdef CONFIG_PPC_PMAC
+	/* HACK ALERT ! Once I find a proper way to say to each driver
+	 * individually what will happen with it's PCI slot, I'll change
+	 * that. On laptops, the AGP slot is just unclocked, so D2 is
+	 * expected, while on desktops, the card is powered off
+	 */
+	if (state >= 3)
+		state = 2;
+#endif /* CONFIG_PPC_PMAC */
+	 
+	if (state != 2 || state == pdev->dev.power.power_state)
+		return 0;
+
+	printk(KERN_DEBUG "aty128fb: suspending...\n");
+	
+	acquire_console_sem();
+
+	fb_set_suspend(info, 1);
+
+	/* Make sure engine is reset */
+	wait_for_idle(par);
+	aty128_reset_engine(par);
+	wait_for_idle(par);
+
+	/* Blank display and LCD */
+	aty128fb_blank(VESA_POWERDOWN, info);
+
+	/* Sleep */
+	par->asleep = 1;
+	par->lock_blank = 1;
+
+	/* Disable AGP. The AGP host should have done it, but since ordering
+	 * isn't always properly guaranteed in this specific case, let's make
+	 * sure it's disabled on card side now. Ultimately, when merging fbdev
+	 * and dri into some common infrastructure, this will be handled
+	 * more nicely. The host bridge side will (or will not) be dealt with
+	 * by the bridge AGP driver, we don't attempt to touch it here.
+	 */
+	agp = pci_find_capability(pdev, PCI_CAP_ID_AGP);
+	if (agp) {
+		u32 cmd;
+
+		pci_read_config_dword(pdev, agp + PCI_AGP_COMMAND, &cmd);
+		if (cmd & PCI_AGP_COMMAND_AGP) {
+			printk(KERN_INFO "aty128fb: AGP was enabled, "
+			       "disabling ...\n");
+			cmd &= ~PCI_AGP_COMMAND_AGP;
+			pci_write_config_dword(pdev, agp + PCI_AGP_COMMAND,
+					       cmd);
+		}
+	}
+
+	/* We need a way to make sure the fbdev layer will _not_ touch the
+	 * framebuffer before we put the chip to suspend state. On 2.4, I
+	 * used dummy fb ops, 2.5 need proper support for this at the
+	 * fbdev level
+	 */
+	if (state == 2)
+		aty128_set_suspend(par, 1);
+
+	release_console_sem();
+
+	pdev->dev.power.power_state = state;
+
+	return 0;
+}
+
+static int aty128_do_resume(struct pci_dev *pdev)
+{
+	struct fb_info *info = pci_get_drvdata(pdev);
+	struct aty128fb_par *par = info->par;
+
+	if (pdev->dev.power.power_state == 0)
+		return 0;
+
+	/* Wakeup chip */
+	if (pdev->dev.power.power_state == 2)
+		aty128_set_suspend(par, 0);
+	par->asleep = 0;
+
+	/* Restore display & engine */
+	aty128_reset_engine(par);
+	wait_for_idle(par);
+	aty128fb_set_par(info);
+	fb_pan_display(info, &info->var);
+	fb_set_cmap(&info->cmap, info);
+
+	/* Refresh */
+	fb_set_suspend(info, 0);
+
+	/* Unblank */
+	par->lock_blank = 0;
+	aty128fb_blank(0, info);
+
+	pdev->dev.power.power_state = PMSG_ON;
+
+	printk(KERN_DEBUG "aty128fb: resumed !\n");
+
+	return 0;
+}
+
+static int aty128_pci_resume(struct pci_dev *pdev)
+{
+	int rc;
+
+	acquire_console_sem();
+	rc = aty128_do_resume(pdev);
+	release_console_sem();
+
+	return rc;
+}
+
+
+static int __init aty128fb_init(void)
+{
+#ifndef MODULE
+	char *option = NULL;
+
+	if (fb_get_options("aty128fb", &option))
+		return -ENODEV;
+	aty128fb_setup(option);
+#endif
+
+	return pci_register_driver(&aty128fb_driver);
+}
+
+static void __exit aty128fb_exit(void)
+{
+	pci_unregister_driver(&aty128fb_driver);
+}
+
+module_init(aty128fb_init);
+
+module_exit(aty128fb_exit);
+
+MODULE_AUTHOR("(c)1999-2003 Brad Douglas <brad@neruo.com>");
+MODULE_DESCRIPTION("FBDev driver for ATI Rage128 / Pro cards");
+MODULE_LICENSE("GPL");
+module_param(mode_option, charp, 0);
+MODULE_PARM_DESC(mode_option, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
+#ifdef CONFIG_MTRR
+module_param_named(nomtrr, mtrr, invbool, 0);
+MODULE_PARM_DESC(nomtrr, "bool: Disable MTRR support (0 or 1=disabled) (default=0)");
+#endif
+