Merge branch 'akpm' (patches from Andrew Morton)

Merge first patch-bomb from Andrew Morton:
 "Quite a lot of other stuff is banked up awaiting further
  next->mainline merging, but this batch contains:

   - Lots of random misc patches
   - OCFS2
   - Most of MM
   - backlight updates
   - lib/ updates
   - printk updates
   - checkpatch updates
   - epoll tweaking
   - rtc updates
   - hfs
   - hfsplus
   - documentation
   - procfs
   - update gcov to gcc-4.7 format
   - IPC"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (269 commits)
  ipc, msg: fix message length check for negative values
  ipc/util.c: remove unnecessary work pending test
  devpts: plug the memory leak in kill_sb
  ./Makefile: export initial ramdisk compression config option
  init/Kconfig: add option to disable kernel compression
  drivers: w1: make w1_slave::flags long to avoid memory corruption
  drivers/w1/masters/ds1wm.cuse dev_get_platdata()
  drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page()
  drivers/memstick/core/mspro_block.c: fix attributes array allocation
  drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr
  kernel/panic.c: reduce 1 byte usage for print tainted buffer
  gcov: reuse kbasename helper
  kernel/gcov/fs.c: use pr_warn()
  kernel/module.c: use pr_foo()
  gcov: compile specific gcov implementation based on gcc version
  gcov: add support for gcc 4.7 gcov format
  gcov: move gcov structs definitions to a gcc version specific file
  kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener()
  kernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_start() and nla_nest_end()
  kernel/sysctl_binary.c: use scnprintf() instead of snprintf()
  ...

1 files changed, 0 insertions, 475 deletions

diff --git a/drivers/video/backlight/lm3630_bl.c b/drivers/video/backlight/lm3630_bl.c
deleted file mode 100644
index 76a62e978fc..00000000000
--- a/drivers/video/backlight/lm3630_bl.c
+++ /dev/null
@@ -1,475 +0,0 @@
-/*
-* Simple driver for Texas Instruments LM3630 Backlight driver chip
-* Copyright (C) 2012 Texas Instruments
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License version 2 as
-* published by the Free Software Foundation.
-*
-*/
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/backlight.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/uaccess.h>
-#include <linux/interrupt.h>
-#include <linux/regmap.h>
-#include <linux/platform_data/lm3630_bl.h>
-
-#define REG_CTRL	0x00
-#define REG_CONFIG	0x01
-#define REG_BRT_A	0x03
-#define REG_BRT_B	0x04
-#define REG_INT_STATUS	0x09
-#define REG_INT_EN	0x0A
-#define REG_FAULT	0x0B
-#define REG_PWM_OUTLOW	0x12
-#define REG_PWM_OUTHIGH	0x13
-#define REG_MAX		0x1F
-
-#define INT_DEBOUNCE_MSEC	10
-
-enum lm3630_leds {
-	BLED_ALL = 0,
-	BLED_1,
-	BLED_2
-};
-
-static const char * const bled_name[] = {
-	[BLED_ALL] = "lm3630_bled",	/*Bank1 controls all string */
-	[BLED_1] = "lm3630_bled1",	/*Bank1 controls bled1 */
-	[BLED_2] = "lm3630_bled2",	/*Bank1 or 2 controls bled2 */
-};
-
-struct lm3630_chip_data {
-	struct device *dev;
-	struct delayed_work work;
-	int irq;
-	struct workqueue_struct *irqthread;
-	struct lm3630_platform_data *pdata;
-	struct backlight_device *bled1;
-	struct backlight_device *bled2;
-	struct regmap *regmap;
-};
-
-/* initialize chip */
-static int lm3630_chip_init(struct lm3630_chip_data *pchip)
-{
-	int ret;
-	unsigned int reg_val;
-	struct lm3630_platform_data *pdata = pchip->pdata;
-
-	/*pwm control */
-	reg_val = ((pdata->pwm_active & 0x01) << 2) | (pdata->pwm_ctrl & 0x03);
-	ret = regmap_update_bits(pchip->regmap, REG_CONFIG, 0x07, reg_val);
-	if (ret < 0)
-		goto out;
-
-	/* bank control */
-	reg_val = ((pdata->bank_b_ctrl & 0x01) << 1) |
-			(pdata->bank_a_ctrl & 0x07);
-	ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x07, reg_val);
-	if (ret < 0)
-		goto out;
-
-	ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
-	if (ret < 0)
-		goto out;
-
-	/* set initial brightness */
-	if (pdata->bank_a_ctrl != BANK_A_CTRL_DISABLE) {
-		ret = regmap_write(pchip->regmap,
-				   REG_BRT_A, pdata->init_brt_led1);
-		if (ret < 0)
-			goto out;
-	}
-
-	if (pdata->bank_b_ctrl != BANK_B_CTRL_DISABLE) {
-		ret = regmap_write(pchip->regmap,
-				   REG_BRT_B, pdata->init_brt_led2);
-		if (ret < 0)
-			goto out;
-	}
-	return ret;
-
-out:
-	dev_err(pchip->dev, "i2c failed to access register\n");
-	return ret;
-}
-
-/* interrupt handling */
-static void lm3630_delayed_func(struct work_struct *work)
-{
-	int ret;
-	unsigned int reg_val;
-	struct lm3630_chip_data *pchip;
-
-	pchip = container_of(work, struct lm3630_chip_data, work.work);
-
-	ret = regmap_read(pchip->regmap, REG_INT_STATUS, &reg_val);
-	if (ret < 0) {
-		dev_err(pchip->dev,
-			"i2c failed to access REG_INT_STATUS Register\n");
-		return;
-	}
-
-	dev_info(pchip->dev, "REG_INT_STATUS Register is 0x%x\n", reg_val);
-}
-
-static irqreturn_t lm3630_isr_func(int irq, void *chip)
-{
-	int ret;
-	struct lm3630_chip_data *pchip = chip;
-	unsigned long delay = msecs_to_jiffies(INT_DEBOUNCE_MSEC);
-
-	queue_delayed_work(pchip->irqthread, &pchip->work, delay);
-
-	ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
-	if (ret < 0)
-		goto out;
-
-	return IRQ_HANDLED;
-out:
-	dev_err(pchip->dev, "i2c failed to access register\n");
-	return IRQ_HANDLED;
-}
-
-static int lm3630_intr_config(struct lm3630_chip_data *pchip)
-{
-	INIT_DELAYED_WORK(&pchip->work, lm3630_delayed_func);
-	pchip->irqthread = create_singlethread_workqueue("lm3630-irqthd");
-	if (!pchip->irqthread) {
-		dev_err(pchip->dev, "create irq thread fail...\n");
-		return -1;
-	}
-	if (request_threaded_irq
-	    (pchip->irq, NULL, lm3630_isr_func,
-	     IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "lm3630_irq", pchip)) {
-		dev_err(pchip->dev, "request threaded irq fail..\n");
-		return -1;
-	}
-	return 0;
-}
-
-static bool
-set_intensity(struct backlight_device *bl, struct lm3630_chip_data *pchip)
-{
-	if (!pchip->pdata->pwm_set_intensity)
-		return false;
-	pchip->pdata->pwm_set_intensity(bl->props.brightness - 1,
-					pchip->pdata->pwm_period);
-	return true;
-}
-
-/* update and get brightness */
-static int lm3630_bank_a_update_status(struct backlight_device *bl)
-{
-	int ret;
-	struct lm3630_chip_data *pchip = bl_get_data(bl);
-	enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
-
-	/* brightness 0 means disable */
-	if (!bl->props.brightness) {
-		ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x04, 0x00);
-		if (ret < 0)
-			goto out;
-		return bl->props.brightness;
-	}
-
-	/* pwm control */
-	if (pwm_ctrl == PWM_CTRL_BANK_A || pwm_ctrl == PWM_CTRL_BANK_ALL) {
-		if (!set_intensity(bl, pchip))
-			dev_err(pchip->dev, "No pwm control func. in plat-data\n");
-	} else {
-
-		/* i2c control */
-		ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
-		if (ret < 0)
-			goto out;
-		mdelay(1);
-		ret = regmap_write(pchip->regmap,
-				   REG_BRT_A, bl->props.brightness - 1);
-		if (ret < 0)
-			goto out;
-	}
-	return bl->props.brightness;
-out:
-	dev_err(pchip->dev, "i2c failed to access REG_CTRL\n");
-	return bl->props.brightness;
-}
-
-static int lm3630_bank_a_get_brightness(struct backlight_device *bl)
-{
-	unsigned int reg_val;
-	int brightness, ret;
-	struct lm3630_chip_data *pchip = bl_get_data(bl);
-	enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
-
-	if (pwm_ctrl == PWM_CTRL_BANK_A || pwm_ctrl == PWM_CTRL_BANK_ALL) {
-		ret = regmap_read(pchip->regmap, REG_PWM_OUTHIGH, &reg_val);
-		if (ret < 0)
-			goto out;
-		brightness = reg_val & 0x01;
-		ret = regmap_read(pchip->regmap, REG_PWM_OUTLOW, &reg_val);
-		if (ret < 0)
-			goto out;
-		brightness = ((brightness << 8) | reg_val) + 1;
-	} else {
-		ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
-		if (ret < 0)
-			goto out;
-		mdelay(1);
-		ret = regmap_read(pchip->regmap, REG_BRT_A, &reg_val);
-		if (ret < 0)
-			goto out;
-		brightness = reg_val + 1;
-	}
-	bl->props.brightness = brightness;
-	return bl->props.brightness;
-out:
-	dev_err(pchip->dev, "i2c failed to access register\n");
-	return 0;
-}
-
-static const struct backlight_ops lm3630_bank_a_ops = {
-	.options = BL_CORE_SUSPENDRESUME,
-	.update_status = lm3630_bank_a_update_status,
-	.get_brightness = lm3630_bank_a_get_brightness,
-};
-
-static int lm3630_bank_b_update_status(struct backlight_device *bl)
-{
-	int ret;
-	struct lm3630_chip_data *pchip = bl_get_data(bl);
-	enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
-
-	if (pwm_ctrl == PWM_CTRL_BANK_B || pwm_ctrl == PWM_CTRL_BANK_ALL) {
-		if (!set_intensity(bl, pchip))
-			dev_err(pchip->dev,
-				"no pwm control func. in plat-data\n");
-	} else {
-		ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
-		if (ret < 0)
-			goto out;
-		mdelay(1);
-		ret = regmap_write(pchip->regmap,
-				   REG_BRT_B, bl->props.brightness - 1);
-	}
-	return bl->props.brightness;
-out:
-	dev_err(pchip->dev, "i2c failed to access register\n");
-	return bl->props.brightness;
-}
-
-static int lm3630_bank_b_get_brightness(struct backlight_device *bl)
-{
-	unsigned int reg_val;
-	int brightness, ret;
-	struct lm3630_chip_data *pchip = bl_get_data(bl);
-	enum lm3630_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
-
-	if (pwm_ctrl == PWM_CTRL_BANK_B || pwm_ctrl == PWM_CTRL_BANK_ALL) {
-		ret = regmap_read(pchip->regmap, REG_PWM_OUTHIGH, &reg_val);
-		if (ret < 0)
-			goto out;
-		brightness = reg_val & 0x01;
-		ret = regmap_read(pchip->regmap, REG_PWM_OUTLOW, &reg_val);
-		if (ret < 0)
-			goto out;
-		brightness = ((brightness << 8) | reg_val) + 1;
-	} else {
-		ret = regmap_update_bits(pchip->regmap, REG_CTRL, 0x80, 0x00);
-		if (ret < 0)
-			goto out;
-		mdelay(1);
-		ret = regmap_read(pchip->regmap, REG_BRT_B, &reg_val);
-		if (ret < 0)
-			goto out;
-		brightness = reg_val + 1;
-	}
-	bl->props.brightness = brightness;
-
-	return bl->props.brightness;
-out:
-	dev_err(pchip->dev, "i2c failed to access register\n");
-	return bl->props.brightness;
-}
-
-static const struct backlight_ops lm3630_bank_b_ops = {
-	.options = BL_CORE_SUSPENDRESUME,
-	.update_status = lm3630_bank_b_update_status,
-	.get_brightness = lm3630_bank_b_get_brightness,
-};
-
-static int lm3630_backlight_register(struct lm3630_chip_data *pchip,
-				     enum lm3630_leds ledno)
-{
-	const char *name = bled_name[ledno];
-	struct backlight_properties props;
-	struct lm3630_platform_data *pdata = pchip->pdata;
-
-	props.type = BACKLIGHT_RAW;
-	switch (ledno) {
-	case BLED_1:
-	case BLED_ALL:
-		props.brightness = pdata->init_brt_led1;
-		props.max_brightness = pdata->max_brt_led1;
-		pchip->bled1 =
-		    backlight_device_register(name, pchip->dev, pchip,
-					      &lm3630_bank_a_ops, &props);
-		if (IS_ERR(pchip->bled1))
-			return PTR_ERR(pchip->bled1);
-		break;
-	case BLED_2:
-		props.brightness = pdata->init_brt_led2;
-		props.max_brightness = pdata->max_brt_led2;
-		pchip->bled2 =
-		    backlight_device_register(name, pchip->dev, pchip,
-					      &lm3630_bank_b_ops, &props);
-		if (IS_ERR(pchip->bled2))
-			return PTR_ERR(pchip->bled2);
-		break;
-	}
-	return 0;
-}
-
-static void lm3630_backlight_unregister(struct lm3630_chip_data *pchip)
-{
-	if (pchip->bled1)
-		backlight_device_unregister(pchip->bled1);
-	if (pchip->bled2)
-		backlight_device_unregister(pchip->bled2);
-}
-
-static const struct regmap_config lm3630_regmap = {
-	.reg_bits = 8,
-	.val_bits = 8,
-	.max_register = REG_MAX,
-};
-
-static int lm3630_probe(struct i2c_client *client,
-				  const struct i2c_device_id *id)
-{
-	struct lm3630_platform_data *pdata = client->dev.platform_data;
-	struct lm3630_chip_data *pchip;
-	int ret;
-
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
-		dev_err(&client->dev, "fail : i2c functionality check...\n");
-		return -EOPNOTSUPP;
-	}
-
-	if (pdata == NULL) {
-		dev_err(&client->dev, "fail : no platform data.\n");
-		return -ENODATA;
-	}
-
-	pchip = devm_kzalloc(&client->dev, sizeof(struct lm3630_chip_data),
-			     GFP_KERNEL);
-	if (!pchip)
-		return -ENOMEM;
-	pchip->pdata = pdata;
-	pchip->dev = &client->dev;
-
-	pchip->regmap = devm_regmap_init_i2c(client, &lm3630_regmap);
-	if (IS_ERR(pchip->regmap)) {
-		ret = PTR_ERR(pchip->regmap);
-		dev_err(&client->dev, "fail : allocate register map: %d\n",
-			ret);
-		return ret;
-	}
-	i2c_set_clientdata(client, pchip);
-
-	/* chip initialize */
-	ret = lm3630_chip_init(pchip);
-	if (ret < 0) {
-		dev_err(&client->dev, "fail : init chip\n");
-		goto err_chip_init;
-	}
-
-	switch (pdata->bank_a_ctrl) {
-	case BANK_A_CTRL_ALL:
-		ret = lm3630_backlight_register(pchip, BLED_ALL);
-		pdata->bank_b_ctrl = BANK_B_CTRL_DISABLE;
-		break;
-	case BANK_A_CTRL_LED1:
-		ret = lm3630_backlight_register(pchip, BLED_1);
-		break;
-	case BANK_A_CTRL_LED2:
-		ret = lm3630_backlight_register(pchip, BLED_2);
-		pdata->bank_b_ctrl = BANK_B_CTRL_DISABLE;
-		break;
-	default:
-		break;
-	}
-
-	if (ret < 0)
-		goto err_bl_reg;
-
-	if (pdata->bank_b_ctrl && pchip->bled2 == NULL) {
-		ret = lm3630_backlight_register(pchip, BLED_2);
-		if (ret < 0)
-			goto err_bl_reg;
-	}
-
-	/* interrupt enable  : irq 0 is not allowed for lm3630 */
-	pchip->irq = client->irq;
-	if (pchip->irq)
-		lm3630_intr_config(pchip);
-
-	dev_info(&client->dev, "LM3630 backlight register OK.\n");
-	return 0;
-
-err_bl_reg:
-	dev_err(&client->dev, "fail : backlight register.\n");
-	lm3630_backlight_unregister(pchip);
-err_chip_init:
-	return ret;
-}
-
-static int lm3630_remove(struct i2c_client *client)
-{
-	int ret;
-	struct lm3630_chip_data *pchip = i2c_get_clientdata(client);
-
-	ret = regmap_write(pchip->regmap, REG_BRT_A, 0);
-	if (ret < 0)
-		dev_err(pchip->dev, "i2c failed to access register\n");
-
-	ret = regmap_write(pchip->regmap, REG_BRT_B, 0);
-	if (ret < 0)
-		dev_err(pchip->dev, "i2c failed to access register\n");
-
-	lm3630_backlight_unregister(pchip);
-	if (pchip->irq) {
-		free_irq(pchip->irq, pchip);
-		flush_workqueue(pchip->irqthread);
-		destroy_workqueue(pchip->irqthread);
-	}
-	return 0;
-}
-
-static const struct i2c_device_id lm3630_id[] = {
-	{LM3630_NAME, 0},
-	{}
-};
-
-MODULE_DEVICE_TABLE(i2c, lm3630_id);
-
-static struct i2c_driver lm3630_i2c_driver = {
-	.driver = {
-		   .name = LM3630_NAME,
-		   },
-	.probe = lm3630_probe,
-	.remove = lm3630_remove,
-	.id_table = lm3630_id,
-};
-
-module_i2c_driver(lm3630_i2c_driver);
-
-MODULE_DESCRIPTION("Texas Instruments Backlight driver for LM3630");
-MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>");
-MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
-MODULE_LICENSE("GPL v2");