Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 127 insertions, 0 deletions

diff --git a/drivers/video/i810/i810_main.h b/drivers/video/i810/i810_main.h
new file mode 100644
index 00000000000..43b4297b4d4
--- /dev/null
+++ b/drivers/video/i810/i810_main.h
@@ -0,0 +1,127 @@
+/*-*- linux-c -*-
+ *  linux/drivers/video/i810fb_main.h -- Intel 810 frame buffer device 
+ *                                       main header file
+ *
+ *      Copyright (C) 2001 Antonino Daplas<adaplas@pol.net>
+ *      All Rights Reserved      
+ *
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+#ifndef __I810_MAIN_H__
+#define __I810_MAIN_H__
+
+static int  __devinit i810fb_init_pci (struct pci_dev *dev, 
+				       const struct pci_device_id *entry);
+static void __exit i810fb_remove_pci(struct pci_dev *dev);
+static int i810fb_resume(struct pci_dev *dev);
+static int i810fb_suspend(struct pci_dev *dev, pm_message_t state);
+
+/*
+ * voffset - framebuffer offset in MiB from aperture start address.  In order for
+ * the driver to work with X, we must try to use memory holes left untouched by X. The 
+ * following table lists where X's different surfaces start at.  
+ * 
+ * ---------------------------------------------
+ * :                :  64 MiB     : 32 MiB      :
+ * ----------------------------------------------
+ * : FrontBuffer    :   0         :  0          :
+ * : DepthBuffer    :   48        :  16         :
+ * : BackBuffer     :   56        :  24         :
+ * ----------------------------------------------
+ *
+ * So for chipsets with 64 MiB Aperture sizes, 32 MiB for v_offset is okay, allowing up to
+ * 15 + 1 MiB of Framebuffer memory.  For 32 MiB Aperture sizes, a v_offset of 8 MiB should
+ * work, allowing 7 + 1 MiB of Framebuffer memory.
+ * Note, the size of the hole may change depending on how much memory you allocate to X,
+ * and how the memory is split up between these surfaces.  
+ *
+ * Note: Anytime the DepthBuffer or FrontBuffer is overlapped, X would still run but with
+ * DRI disabled.  But if the Frontbuffer is overlapped, X will fail to load.
+ * 
+ * Experiment with v_offset to find out which works best for you.
+ */
+static u32 v_offset_default __initdata; /* For 32 MiB Aper size, 8 should be the default */
+static u32 voffset          __initdata = 0;
+
+static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
+
+/* Chipset Specific Functions */
+static int i810fb_set_par    (struct fb_info *info);
+static int i810fb_getcolreg  (u8 regno, u8 *red, u8 *green, u8 *blue,
+			      u8 *transp, struct fb_info *info);
+static int i810fb_setcolreg  (unsigned regno, unsigned red, unsigned green, unsigned blue,
+			      unsigned transp, struct fb_info *info);
+static int i810fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
+static int i810fb_blank      (int blank_mode, struct fb_info *info);
+
+/* Initialization */
+static void i810fb_release_resource       (struct fb_info *info, struct i810fb_par *par);
+extern int __init agp_intel_init(void);
+
+
+/* Video Timings */
+extern void round_off_xres         (u32 *xres);
+extern void round_off_yres         (u32 *xres, u32 *yres);
+extern u32 i810_get_watermark      (const struct fb_var_screeninfo *var,
+			            struct i810fb_par *par);
+extern void i810fb_encode_registers(const struct fb_var_screeninfo *var,
+				    struct i810fb_par *par, u32 xres, u32 yres);
+extern void i810fb_fill_var_timings(struct fb_var_screeninfo *var);
+				    
+/* Accelerated Functions */
+extern void i810fb_fillrect (struct fb_info *p, 
+			     const struct fb_fillrect *rect);
+extern void i810fb_copyarea (struct fb_info *p, 
+			     const struct fb_copyarea *region);
+extern void i810fb_imageblit(struct fb_info *p, const struct fb_image *image);
+extern int  i810fb_sync     (struct fb_info *p);
+
+extern void i810fb_init_ringbuffer(struct fb_info *info);
+extern void i810fb_load_front     (u32 offset, struct fb_info *info);
+
+/* Conditionals */
+#ifdef CONFIG_X86
+inline void flush_cache(void)
+{
+	asm volatile ("wbinvd":::"memory");
+}
+#else
+#define flush_cache() do { } while(0)
+#endif 
+
+#ifdef CONFIG_MTRR
+#define KERNEL_HAS_MTRR 1
+static inline void __devinit set_mtrr(struct i810fb_par *par)
+{
+	par->mtrr_reg = mtrr_add((u32) par->aperture.physical, 
+		 par->aperture.size, MTRR_TYPE_WRCOMB, 1);
+	if (par->mtrr_reg < 0) {
+		printk(KERN_ERR "set_mtrr: unable to set MTRR\n");
+		return;
+	}
+	par->dev_flags |= HAS_MTRR;
+}
+static inline void unset_mtrr(struct i810fb_par *par)
+{
+  	if (par->dev_flags & HAS_MTRR) 
+  		mtrr_del(par->mtrr_reg, (u32) par->aperture.physical, 
+			 par->aperture.size); 
+}
+#else
+#define KERNEL_HAS_MTRR 0
+#define set_mtrr(x) printk("set_mtrr: MTRR is disabled in the kernel\n")
+
+#define unset_mtrr(x) do { } while (0)
+#endif /* CONFIG_MTRR */
+
+#ifdef CONFIG_FB_I810_GTF
+#define IS_DVT (0)
+#else
+#define IS_DVT (1)
+#endif
+
+#endif /* __I810_MAIN_H__ */