Merge tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6

Pull fbdev updates from Florian Tobias Schandinat:
 - driver for AUO-K1900 and AUO-K1901 epaper controller
 - large updates for OMAP (e.g. decouple HDMI audio and video)
 - some updates for Exynos and SH Mobile
 - various other small fixes and cleanups

* tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6: (130 commits)
  video: bfin_adv7393fb: Fix cleanup code
  video: exynos_dp: reduce delay time when configuring video setting
  video: exynos_dp: move sw reset prioir to enabling sw defined function
  video: exynos_dp: use devm_ functions
  fb: handle NULL pointers in framebuffer release
  OMAPDSS: HDMI: OMAP4: Update IRQ flags for the HPD IRQ request
  OMAPDSS: Apply VENC timings even if panel is disabled
  OMAPDSS: VENC/DISPC: Delay dividing Y resolution for managers connected to VENC
  OMAPDSS: DISPC: Support rotation through TILER
  OMAPDSS: VRFB: remove compiler warnings when CONFIG_BUG=n
  OMAPFB: remove compiler warnings when CONFIG_BUG=n
  OMAPDSS: remove compiler warnings when CONFIG_BUG=n
  OMAPDSS: DISPC: fix usage of dispc_ovl_set_accu_uv
  OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays
  OMAPDSS: DSI: Support command mode interleaving during video mode blanking periods
  OMAPDSS: DISPC: Update Accumulator configuration for chroma plane
  drivers/video: fsl-diu-fb: don't initialize the THRESHOLDS registers
  video: exynos mipi dsi: support reverse panel type
  video: exynos mipi dsi: Properly interpret the interrupt source flags
  video: exynos mipi dsi: Avoid races in probe()
  ...

6 files changed, 160 insertions, 148 deletions

diff --git a/drivers/video/omap2/displays/panel-acx565akm.c b/drivers/video/omap2/displays/panel-acx565akm.c
index 74e7cf07850..ad741c3d1ae 100644
--- a/drivers/video/omap2/displays/panel-acx565akm.c
+++ b/drivers/video/omap2/displays/panel-acx565akm.c
@@ -739,12 +739,6 @@ static void acx_panel_set_timings(struct omap_dss_device *dssdev,
 	}
 }
 
-static void acx_panel_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	*timings = dssdev->panel.timings;
-}
-
 static int acx_panel_check_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
@@ -762,7 +756,6 @@ static struct omap_dss_driver acx_panel_driver = {
 	.resume		= acx_panel_resume,
 
 	.set_timings	= acx_panel_set_timings,
-	.get_timings	= acx_panel_get_timings,
 	.check_timings	= acx_panel_check_timings,
 
 	.get_recommended_bpp = acx_get_recommended_bpp,
diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
index 30fe4dfeb22..e42f9dc2212 100644
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ b/drivers/video/omap2/displays/panel-generic-dpi.c
@@ -386,6 +386,106 @@ static struct panel_config generic_dpi_panels[] = {
 
 		.name			= "innolux_at080tn52",
 	},
+
+	/* Mitsubishi AA084SB01 */
+	{
+		{
+			.x_res		= 800,
+			.y_res		= 600,
+			.pixel_clock	= 40000,
+
+			.hsw		= 1,
+			.hfp		= 254,
+			.hbp		= 1,
+
+			.vsw		= 1,
+			.vfp		= 26,
+			.vbp		= 1,
+		},
+		.config			= OMAP_DSS_LCD_TFT,
+		.name			= "mitsubishi_aa084sb01",
+	},
+	/* EDT ET0500G0DH6 */
+	{
+		{
+			.x_res		= 800,
+			.y_res		= 480,
+			.pixel_clock	= 33260,
+
+			.hsw		= 128,
+			.hfp		= 216,
+			.hbp		= 40,
+
+			.vsw		= 2,
+			.vfp		= 35,
+			.vbp		= 10,
+		},
+		.config			= OMAP_DSS_LCD_TFT,
+		.name			= "edt_et0500g0dh6",
+	},
+
+	/* Prime-View PD050VL1 */
+	{
+		{
+			.x_res		= 640,
+			.y_res		= 480,
+
+			.pixel_clock	= 25000,
+
+			.hsw		= 96,
+			.hfp		= 18,
+			.hbp		= 46,
+
+			.vsw		= 2,
+			.vfp		= 10,
+			.vbp		= 33,
+		},
+		.config			= OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+					  OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IPC,
+		.name			= "primeview_pd050vl1",
+	},
+
+	/* Prime-View PM070WL4 */
+	{
+		{
+			.x_res		= 800,
+			.y_res		= 480,
+
+			.pixel_clock	= 32000,
+
+			.hsw		= 128,
+			.hfp		= 42,
+			.hbp		= 86,
+
+			.vsw		= 2,
+			.vfp		= 10,
+			.vbp		= 33,
+		},
+		.config			= OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+					  OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IPC,
+		.name			= "primeview_pm070wl4",
+	},
+
+	/* Prime-View PD104SLF */
+	{
+		{
+			.x_res		= 800,
+			.y_res		= 600,
+
+			.pixel_clock	= 40000,
+
+			.hsw		= 128,
+			.hfp		= 42,
+			.hbp		= 86,
+
+			.vsw		= 4,
+			.vfp		= 1,
+			.vbp		= 23,
+		},
+		.config			= OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+					  OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IPC,
+		.name			= "primeview_pd104slf",
+	},
 };
 
 struct panel_drv_data {
@@ -549,12 +649,6 @@ static void generic_dpi_panel_set_timings(struct omap_dss_device *dssdev,
 	dpi_set_timings(dssdev, timings);
 }
 
-static void generic_dpi_panel_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	*timings = dssdev->panel.timings;
-}
-
 static int generic_dpi_panel_check_timings(struct omap_dss_device *dssdev,
 		struct omap_video_timings *timings)
 {
@@ -571,7 +665,6 @@ static struct omap_dss_driver dpi_driver = {
 	.resume		= generic_dpi_panel_resume,
 
 	.set_timings	= generic_dpi_panel_set_timings,
-	.get_timings	= generic_dpi_panel_get_timings,
 	.check_timings	= generic_dpi_panel_check_timings,
 
 	.driver         = {
diff --git a/drivers/video/omap2/displays/panel-n8x0.c b/drivers/video/omap2/displays/panel-n8x0.c
index dc9408dc93d..4a34cdc1371 100644
--- a/drivers/video/omap2/displays/panel-n8x0.c
+++ b/drivers/video/omap2/displays/panel-n8x0.c
@@ -610,12 +610,6 @@ static int n8x0_panel_resume(struct omap_dss_device *dssdev)
 	return 0;
 }
 
-static void n8x0_panel_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	*timings = dssdev->panel.timings;
-}
-
 static void n8x0_panel_get_resolution(struct omap_dss_device *dssdev,
 		u16 *xres, u16 *yres)
 {
@@ -678,8 +672,6 @@ static struct omap_dss_driver n8x0_panel_driver = {
 	.get_resolution	= n8x0_panel_get_resolution,
 	.get_recommended_bpp = omapdss_default_get_recommended_bpp,
 
-	.get_timings	= n8x0_panel_get_timings,
-
 	.driver         = {
 		.name   = "n8x0_panel",
 		.owner  = THIS_MODULE,
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index b2dd88b4842..2ce9992f403 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -30,7 +30,6 @@
 #include <linux/gpio.h>
 #include <linux/workqueue.h>
 #include <linux/slab.h>
-#include <linux/regulator/consumer.h>
 #include <linux/mutex.h>
 
 #include <video/omapdss.h>
@@ -55,73 +54,6 @@ static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable);
 
 static int taal_panel_reset(struct omap_dss_device *dssdev);
 
-struct panel_regulator {
-	struct regulator *regulator;
-	const char *name;
-	int min_uV;
-	int max_uV;
-};
-
-static void free_regulators(struct panel_regulator *regulators, int n)
-{
-	int i;
-
-	for (i = 0; i < n; i++) {
-		/* disable/put in reverse order */
-		regulator_disable(regulators[n - i - 1].regulator);
-		regulator_put(regulators[n - i - 1].regulator);
-	}
-}
-
-static int init_regulators(struct omap_dss_device *dssdev,
-			struct panel_regulator *regulators, int n)
-{
-	int r, i, v;
-
-	for (i = 0; i < n; i++) {
-		struct regulator *reg;
-
-		reg = regulator_get(&dssdev->dev, regulators[i].name);
-		if (IS_ERR(reg)) {
-			dev_err(&dssdev->dev, "failed to get regulator %s\n",
-				regulators[i].name);
-			r = PTR_ERR(reg);
-			goto err;
-		}
-
-		/* FIXME: better handling of fixed vs. variable regulators */
-		v = regulator_get_voltage(reg);
-		if (v < regulators[i].min_uV || v > regulators[i].max_uV) {
-			r = regulator_set_voltage(reg, regulators[i].min_uV,
-						regulators[i].max_uV);
-			if (r) {
-				dev_err(&dssdev->dev,
-					"failed to set regulator %s voltage\n",
-					regulators[i].name);
-				regulator_put(reg);
-				goto err;
-			}
-		}
-
-		r = regulator_enable(reg);
-		if (r) {
-			dev_err(&dssdev->dev, "failed to enable regulator %s\n",
-				regulators[i].name);
-			regulator_put(reg);
-			goto err;
-		}
-
-		regulators[i].regulator = reg;
-	}
-
-	return 0;
-
-err:
-	free_regulators(regulators, i);
-
-	return r;
-}
-
 /**
  * struct panel_config - panel configuration
  * @name: panel name
@@ -150,8 +82,6 @@ struct panel_config {
 		unsigned int low;
 	} reset_sequence;
 
-	struct panel_regulator *regulators;
-	int num_regulators;
 };
 
 enum {
@@ -577,12 +507,6 @@ static const struct backlight_ops taal_bl_ops = {
 	.update_status  = taal_bl_update_status,
 };
 
-static void taal_get_timings(struct omap_dss_device *dssdev,
-			struct omap_video_timings *timings)
-{
-	*timings = dssdev->panel.timings;
-}
-
 static void taal_get_resolution(struct omap_dss_device *dssdev,
 		u16 *xres, u16 *yres)
 {
@@ -977,11 +901,6 @@ static int taal_probe(struct omap_dss_device *dssdev)
 
 	atomic_set(&td->do_update, 0);
 
-	r = init_regulators(dssdev, panel_config->regulators,
-			panel_config->num_regulators);
-	if (r)
-		goto err_reg;
-
 	td->workqueue = create_singlethread_workqueue("taal_esd");
 	if (td->workqueue == NULL) {
 		dev_err(&dssdev->dev, "can't create ESD workqueue\n");
@@ -1087,8 +1006,6 @@ err_bl:
 err_rst_gpio:
 	destroy_workqueue(td->workqueue);
 err_wq:
-	free_regulators(panel_config->regulators, panel_config->num_regulators);
-err_reg:
 	kfree(td);
 err:
 	return r;
@@ -1125,9 +1042,6 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
 	/* reset, to be sure that the panel is in a valid state */
 	taal_hw_reset(dssdev);
 
-	free_regulators(td->panel_config->regulators,
-			td->panel_config->num_regulators);
-
 	if (gpio_is_valid(panel_data->reset_gpio))
 		gpio_free(panel_data->reset_gpio);
 
@@ -1909,8 +1823,6 @@ static struct omap_dss_driver taal_driver = {
 	.run_test	= taal_run_test,
 	.memory_read	= taal_memory_read,
 
-	.get_timings	= taal_get_timings,
-
 	.driver         = {
 		.name   = "taal",
 		.owner  = THIS_MODULE,
diff --git a/drivers/video/omap2/displays/panel-tfp410.c b/drivers/video/omap2/displays/panel-tfp410.c
index 52637fa8fda..bff306e041c 100644
--- a/drivers/video/omap2/displays/panel-tfp410.c
+++ b/drivers/video/omap2/displays/panel-tfp410.c
@@ -47,13 +47,9 @@ struct panel_drv_data {
 	struct mutex lock;
 
 	int pd_gpio;
-};
 
-static inline struct tfp410_platform_data
-*get_pdata(const struct omap_dss_device *dssdev)
-{
-	return dssdev->data;
-}
+	struct i2c_adapter *i2c_adapter;
+};
 
 static int tfp410_power_on(struct omap_dss_device *dssdev)
 {
@@ -68,7 +64,7 @@ static int tfp410_power_on(struct omap_dss_device *dssdev)
 		goto err0;
 
 	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_set_value(ddata->pd_gpio, 1);
+		gpio_set_value_cansleep(ddata->pd_gpio, 1);
 
 	return 0;
 err0:
@@ -83,18 +79,18 @@ static void tfp410_power_off(struct omap_dss_device *dssdev)
 		return;
 
 	if (gpio_is_valid(ddata->pd_gpio))
-		gpio_set_value(ddata->pd_gpio, 0);
+		gpio_set_value_cansleep(ddata->pd_gpio, 0);
 
 	omapdss_dpi_display_disable(dssdev);
 }
 
 static int tfp410_probe(struct omap_dss_device *dssdev)
 {
-	struct tfp410_platform_data *pdata = get_pdata(dssdev);
 	struct panel_drv_data *ddata;
 	int r;
+	int i2c_bus_num;
 
-	ddata = kzalloc(sizeof(*ddata), GFP_KERNEL);
+	ddata = devm_kzalloc(&dssdev->dev, sizeof(*ddata), GFP_KERNEL);
 	if (!ddata)
 		return -ENOMEM;
 
@@ -104,10 +100,15 @@ static int tfp410_probe(struct omap_dss_device *dssdev)
 	ddata->dssdev = dssdev;
 	mutex_init(&ddata->lock);
 
-	if (pdata)
+	if (dssdev->data) {
+		struct tfp410_platform_data *pdata = dssdev->data;
+
 		ddata->pd_gpio = pdata->power_down_gpio;
-	else
+		i2c_bus_num = pdata->i2c_bus_num;
+	} else {
 		ddata->pd_gpio = -1;
+		i2c_bus_num = -1;
+	}
 
 	if (gpio_is_valid(ddata->pd_gpio)) {
 		r = gpio_request_one(ddata->pd_gpio, GPIOF_OUT_INIT_LOW,
@@ -115,13 +116,31 @@ static int tfp410_probe(struct omap_dss_device *dssdev)
 		if (r) {
 			dev_err(&dssdev->dev, "Failed to request PD GPIO %d\n",
 					ddata->pd_gpio);
-			ddata->pd_gpio = -1;
+			return r;
 		}
 	}
 
+	if (i2c_bus_num != -1) {
+		struct i2c_adapter *adapter;
+
+		adapter = i2c_get_adapter(i2c_bus_num);
+		if (!adapter) {
+			dev_err(&dssdev->dev, "Failed to get I2C adapter, bus %d\n",
+					i2c_bus_num);
+			r = -EINVAL;
+			goto err_i2c;
+		}
+
+		ddata->i2c_adapter = adapter;
+	}
+
 	dev_set_drvdata(&dssdev->dev, ddata);
 
 	return 0;
+err_i2c:
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_free(ddata->pd_gpio);
+	return r;
 }
 
 static void __exit tfp410_remove(struct omap_dss_device *dssdev)
@@ -130,14 +149,15 @@ static void __exit tfp410_remove(struct omap_dss_device *dssdev)
 
 	mutex_lock(&ddata->lock);
 
+	if (ddata->i2c_adapter)
+		i2c_put_adapter(ddata->i2c_adapter);
+
 	if (gpio_is_valid(ddata->pd_gpio))
 		gpio_free(ddata->pd_gpio);
 
 	dev_set_drvdata(&dssdev->dev, NULL);
 
 	mutex_unlock(&ddata->lock);
-
-	kfree(ddata);
 }
 
 static int tfp410_enable(struct omap_dss_device *dssdev)
@@ -269,27 +289,17 @@ static int tfp410_read_edid(struct omap_dss_device *dssdev,
 		u8 *edid, int len)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-	struct tfp410_platform_data *pdata = get_pdata(dssdev);
-	struct i2c_adapter *adapter;
 	int r, l, bytes_read;
 
 	mutex_lock(&ddata->lock);
 
-	if (pdata->i2c_bus_num == 0) {
+	if (!ddata->i2c_adapter) {
 		r = -ENODEV;
 		goto err;
 	}
 
-	adapter = i2c_get_adapter(pdata->i2c_bus_num);
-	if (!adapter) {
-		dev_err(&dssdev->dev, "Failed to get I2C adapter, bus %d\n",
-				pdata->i2c_bus_num);
-		r = -EINVAL;
-		goto err;
-	}
-
 	l = min(EDID_LENGTH, len);
-	r = tfp410_ddc_read(adapter, edid, l, 0);
+	r = tfp410_ddc_read(ddata->i2c_adapter, edid, l, 0);
 	if (r)
 		goto err;
 
@@ -299,7 +309,7 @@ static int tfp410_read_edid(struct omap_dss_device *dssdev,
 	if (len > EDID_LENGTH && edid[0x7e] > 0) {
 		l = min(EDID_LENGTH, len - EDID_LENGTH);
 
-		r = tfp410_ddc_read(adapter, edid + EDID_LENGTH,
+		r = tfp410_ddc_read(ddata->i2c_adapter, edid + EDID_LENGTH,
 				l, EDID_LENGTH);
 		if (r)
 			goto err;
@@ -319,21 +329,15 @@ err:
 static bool tfp410_detect(struct omap_dss_device *dssdev)
 {
 	struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
-	struct tfp410_platform_data *pdata = get_pdata(dssdev);
-	struct i2c_adapter *adapter;
 	unsigned char out;
 	int r;
 
 	mutex_lock(&ddata->lock);
 
-	if (pdata->i2c_bus_num == 0)
-		goto out;
-
-	adapter = i2c_get_adapter(pdata->i2c_bus_num);
-	if (!adapter)
+	if (!ddata->i2c_adapter)
 		goto out;
 
-	r = tfp410_ddc_read(adapter, &out, 1, 0);
+	r = tfp410_ddc_read(ddata->i2c_adapter, &out, 1, 0);
 
 	mutex_unlock(&ddata->lock);
 
diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
index 32f3fcd7f0f..4b6448b3c31 100644
--- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
+++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
@@ -272,13 +272,16 @@ static const struct omap_video_timings tpo_td043_timings = {
 static int tpo_td043_power_on(struct tpo_td043_device *tpo_td043)
 {
 	int nreset_gpio = tpo_td043->nreset_gpio;
+	int r;
 
 	if (tpo_td043->powered_on)
 		return 0;
 
-	regulator_enable(tpo_td043->vcc_reg);
+	r = regulator_enable(tpo_td043->vcc_reg);
+	if (r != 0)
+		return r;
 
-	/* wait for regulator to stabilize */
+	/* wait for panel to stabilize */
 	msleep(160);
 
 	if (gpio_is_valid(nreset_gpio))
@@ -470,6 +473,18 @@ static void tpo_td043_remove(struct omap_dss_device *dssdev)
 		gpio_free(nreset_gpio);
 }
 
+static void tpo_td043_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	dpi_set_timings(dssdev, timings);
+}
+
+static int tpo_td043_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	return dpi_check_timings(dssdev, timings);
+}
+
 static struct omap_dss_driver tpo_td043_driver = {
 	.probe		= tpo_td043_probe,
 	.remove		= tpo_td043_remove,
@@ -481,6 +496,9 @@ static struct omap_dss_driver tpo_td043_driver = {
 	.set_mirror	= tpo_td043_set_hmirror,
 	.get_mirror	= tpo_td043_get_hmirror,
 
+	.set_timings	= tpo_td043_set_timings,
+	.check_timings	= tpo_td043_check_timings,
+
 	.driver         = {
 		.name	= "tpo_td043mtea1_panel",
 		.owner  = THIS_MODULE,