OMAP4: DSS2: Register configuration changes for DSI

The following changes have changed from OMAP3 to OMAP4 DSI:
-The register field DSI_PLL_FREQSEL in DSI_PLL_CONFIGURATION2 has been removed.
-DCS_CMD_ENABLE and DCS_CMD_CODE bits have been moved from DSI_CTRL to
DSI_VC_CTRLi, hence the control of the bits is available per VC.
-DSI LDO powergood notification doesn't work on OMAP4. This is mentioned in
OMAP4 errata revision 1.8(Errata 1.76).
-OCP_WIDTH register field is included in DSI_VC_CTRL.
-The SCP clock is also required to access DSI PLL registers

Introduce dss features for these changes so that DSI runs on both OMAP3 and
OMAP4.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

3 files changed, 63 insertions, 38 deletions

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index fe655b6ab2a..5ce99667e7e 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1275,7 +1275,7 @@ int dsi_pll_set_clock_div(struct dsi_clock_info *cinfo)
 {
 	int r = 0;
 	u32 l;
-	int f;
+	int f = 0;
 	u8 regn_start, regn_end, regm_start, regm_end;
 	u8 regm_dispc_start, regm_dispc_end, regm_dsi_start, regm_dsi_end;
 
@@ -1349,19 +1349,19 @@ int dsi_pll_set_clock_div(struct dsi_clock_info *cinfo)
 	dsi_write_reg(DSI_PLL_CONFIGURATION1, l);
 
 	BUG_ON(cinfo->fint < dsi.fint_min || cinfo->fint > dsi.fint_max);
-	if (cinfo->fint < 1000000)
-		f = 0x3;
-	else if (cinfo->fint < 1250000)
-		f = 0x4;
-	else if (cinfo->fint < 1500000)
-		f = 0x5;
-	else if (cinfo->fint < 1750000)
-		f = 0x6;
-	else
-		f = 0x7;
+
+	if (dss_has_feature(FEAT_DSI_PLL_FREQSEL)) {
+		f = cinfo->fint < 1000000 ? 0x3 :
+			cinfo->fint < 1250000 ? 0x4 :
+			cinfo->fint < 1500000 ? 0x5 :
+			cinfo->fint < 1750000 ? 0x6 :
+			0x7;
+	}
 
 	l = dsi_read_reg(DSI_PLL_CONFIGURATION2);
-	l = FLD_MOD(l, f, 4, 1);		/* DSI_PLL_FREQSEL */
+
+	if (dss_has_feature(FEAT_DSI_PLL_FREQSEL))
+		l = FLD_MOD(l, f, 4, 1);	/* DSI_PLL_FREQSEL */
 	l = FLD_MOD(l, cinfo->use_sys_clk ? 0 : 1,
 			11, 11);		/* DSI_PLL_CLKSEL */
 	l = FLD_MOD(l, cinfo->highfreq,
@@ -1877,9 +1877,6 @@ static int dsi_complexio_init(struct omap_dss_device *dssdev)
 
 	DSSDBG("dsi_complexio_init\n");
 
-	/* CIO_CLK_ICG, enable L3 clk to CIO */
-	REG_FLD_MOD(DSI_CLK_CTRL, 1, 14, 14);
-
 	/* A dummy read using the SCP interface to any DSIPHY register is
 	 * required after DSIPHY reset to complete the reset of the DSI complex
 	 * I/O. */
@@ -1904,10 +1901,12 @@ static int dsi_complexio_init(struct omap_dss_device *dssdev)
 		goto err;
 	}
 
-	if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 21, 1) != 1) {
-		DSSERR("ComplexIO LDO power down.\n");
-		r = -ENODEV;
-		goto err;
+	if (dss_has_feature(FEAT_DSI_LDO_STATUS)) {
+		if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 21, 1) != 1) {
+			DSSERR("ComplexIO LDO power down.\n");
+			r = -ENODEV;
+			goto err;
+		}
 	}
 
 	dsi_complexio_timings();
@@ -2074,6 +2073,8 @@ static void dsi_vc_initial_config(int channel)
 	r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */
 	r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */
 	r = FLD_MOD(r, 0, 9, 9); /* MODE_SPEED, high speed on/off */
+	if (dss_has_feature(FEAT_DSI_VC_OCP_WIDTH))
+		r = FLD_MOD(r, 3, 11, 10);	/* OCP_WIDTH = 32 bit */
 
 	r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */
 	r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */
@@ -2098,6 +2099,10 @@ static int dsi_vc_config_l4(int channel)
 
 	REG_FLD_MOD(DSI_VC_CTRL(channel), 0, 1, 1); /* SOURCE, 0 = L4 */
 
+	/* DCS_CMD_ENABLE */
+	if (dss_has_feature(FEAT_DSI_DCS_CMD_CONFIG_VC))
+		REG_FLD_MOD(DSI_VC_CTRL(channel), 0, 30, 30);
+
 	dsi_vc_enable(channel, 1);
 
 	dsi.vc[channel].mode = DSI_VC_MODE_L4;
@@ -2122,6 +2127,10 @@ static int dsi_vc_config_vp(int channel)
 
 	REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 1, 1); /* SOURCE, 1 = video port */
 
+	/* DCS_CMD_ENABLE */
+	if (dss_has_feature(FEAT_DSI_DCS_CMD_CONFIG_VC))
+		REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 30, 30);
+
 	dsi_vc_enable(channel, 1);
 
 	dsi.vc[channel].mode = DSI_VC_MODE_VP;
@@ -2777,8 +2786,11 @@ static int dsi_proto_config(struct omap_dss_device *dssdev)
 	r = FLD_MOD(r, 2, 13, 12);	/* LINE_BUFFER, 2 lines */
 	r = FLD_MOD(r, 1, 14, 14);	/* TRIGGER_RESET_MODE */
 	r = FLD_MOD(r, 1, 19, 19);	/* EOT_ENABLE */
-	r = FLD_MOD(r, 1, 24, 24);	/* DCS_CMD_ENABLE */
-	r = FLD_MOD(r, 0, 25, 25);	/* DCS_CMD_CODE, 1=start, 0=continue */
+	if (!dss_has_feature(FEAT_DSI_DCS_CMD_CONFIG_VC)) {
+		r = FLD_MOD(r, 1, 24, 24);	/* DCS_CMD_ENABLE */
+		/* DCS_CMD_CODE, 1=start, 0=continue */
+		r = FLD_MOD(r, 0, 25, 25);
+	}
 
 	dsi_write_reg(DSI_CTRL, r);
 
@@ -3375,6 +3387,10 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
 {
 	int r;
 
+	/* The SCPClk is required for both PLL and CIO registers on OMAP4 */
+	/* CIO_CLK_ICG, enable L3 clk to CIO */
+	REG_FLD_MOD(DSI_CLK_CTRL, 1, 14, 14);
+
 	_dsi_print_reset_status();
 
 	r = dsi_pll_init(dssdev, true, true);
@@ -3387,6 +3403,8 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev)
 
 	dss_select_dispc_clk_source(DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC);
 	dss_select_dsi_clk_source(DSS_CLK_SRC_DSI_PLL_HSDIV_DSI);
+	dss_select_lcd_clk_source(dssdev->manager->id,
+		DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC);
 
 	DSSDBG("PLL OK\n");
 
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/omap2/dss/dss_features.c
index 43a4b51de15..5bf156b812f 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/omap2/dss/dss_features.c
@@ -252,7 +252,8 @@ static struct omap_dss_features omap3430_dss_features = {
 		FEAT_GLOBAL_ALPHA | FEAT_LCDENABLEPOL |
 		FEAT_LCDENABLESIGNAL | FEAT_PCKFREEENABLE |
 		FEAT_FUNCGATED | FEAT_ROWREPEATENABLE |
-		FEAT_LINEBUFFERSPLIT | FEAT_RESIZECONF,
+		FEAT_LINEBUFFERSPLIT | FEAT_RESIZECONF |
+		FEAT_DSI_PLL_FREQSEL | FEAT_DSI_LDO_STATUS,
 
 	.num_mgrs = 2,
 	.num_ovls = 3,
@@ -271,7 +272,8 @@ static struct omap_dss_features omap3630_dss_features = {
 		FEAT_LCDENABLESIGNAL | FEAT_PCKFREEENABLE |
 		FEAT_PRE_MULT_ALPHA | FEAT_FUNCGATED |
 		FEAT_ROWREPEATENABLE | FEAT_LINEBUFFERSPLIT |
-		FEAT_RESIZECONF | FEAT_DSI_PLL_PWR_BUG,
+		FEAT_RESIZECONF | FEAT_DSI_PLL_PWR_BUG |
+		FEAT_DSI_PLL_FREQSEL |FEAT_DSI_LDO_STATUS,
 
 	.num_mgrs = 2,
 	.num_ovls = 3,
@@ -289,7 +291,8 @@ static struct omap_dss_features omap4_dss_features = {
 	.has_feature	=
 		FEAT_GLOBAL_ALPHA | FEAT_PRE_MULT_ALPHA |
 		FEAT_MGR_LCD2 | FEAT_GLOBAL_ALPHA_VID1 |
-		FEAT_CORE_CLK_DIV | FEAT_LCD_CLK_SRC,
+		FEAT_CORE_CLK_DIV | FEAT_LCD_CLK_SRC |
+		FEAT_DSI_DCS_CMD_CONFIG_VC | FEAT_DSI_VC_OCP_WIDTH,
 
 	.num_mgrs = 3,
 	.num_ovls = 3,
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/omap2/dss/dss_features.h
index 37922ce6b8b..ae25be2021f 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/omap2/dss/dss_features.h
@@ -26,22 +26,26 @@
 
 /* DSS has feature id */
 enum dss_feat_id {
-	FEAT_GLOBAL_ALPHA	= 1 << 0,
-	FEAT_GLOBAL_ALPHA_VID1	= 1 << 1,
-	FEAT_PRE_MULT_ALPHA	= 1 << 2,
-	FEAT_LCDENABLEPOL	= 1 << 3,
-	FEAT_LCDENABLESIGNAL	= 1 << 4,
-	FEAT_PCKFREEENABLE	= 1 << 5,
-	FEAT_FUNCGATED		= 1 << 6,
-	FEAT_MGR_LCD2		= 1 << 7,
-	FEAT_LINEBUFFERSPLIT	= 1 << 8,
-	FEAT_ROWREPEATENABLE	= 1 << 9,
-	FEAT_RESIZECONF		= 1 << 10,
+	FEAT_GLOBAL_ALPHA		= 1 << 0,
+	FEAT_GLOBAL_ALPHA_VID1		= 1 << 1,
+	FEAT_PRE_MULT_ALPHA		= 1 << 2,
+	FEAT_LCDENABLEPOL		= 1 << 3,
+	FEAT_LCDENABLESIGNAL		= 1 << 4,
+	FEAT_PCKFREEENABLE		= 1 << 5,
+	FEAT_FUNCGATED			= 1 << 6,
+	FEAT_MGR_LCD2			= 1 << 7,
+	FEAT_LINEBUFFERSPLIT		= 1 << 8,
+	FEAT_ROWREPEATENABLE		= 1 << 9,
+	FEAT_RESIZECONF			= 1 << 10,
 	/* Independent core clk divider */
-	FEAT_CORE_CLK_DIV	= 1 << 11,
-	FEAT_LCD_CLK_SRC	= 1 << 12,
+	FEAT_CORE_CLK_DIV		= 1 << 11,
+	FEAT_LCD_CLK_SRC		= 1 << 12,
 	/* DSI-PLL power command 0x3 is not working */
-	FEAT_DSI_PLL_PWR_BUG	= 1 << 13,
+	FEAT_DSI_PLL_PWR_BUG		= 1 << 13,
+	FEAT_DSI_PLL_FREQSEL		= 1 << 14,
+	FEAT_DSI_LDO_STATUS		= 1 << 15,
+	FEAT_DSI_DCS_CMD_CONFIG_VC	= 1 << 16,
+	FEAT_DSI_VC_OCP_WIDTH		= 1 << 17,
 };
 
 /* DSS register field id */