Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 901 insertions, 0 deletions

diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
new file mode 100644
index 00000000000..8413907b379
--- /dev/null
+++ b/drivers/video/sgivwfb.c
@@ -0,0 +1,901 @@
+/*
+ *  linux/drivers/video/sgivwfb.c -- SGI DBE frame buffer device
+ *
+ *	Copyright (C) 1999 Silicon Graphics, Inc.
+ *      Jeffrey Newquist, newquist@engr.sgi.som
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+#include <asm/mtrr.h>
+
+#define INCLUDE_TIMING_TABLE_DATA
+#define DBE_REG_BASE par->regs
+#include <video/sgivw.h>
+
+struct sgivw_par {
+	struct asregs *regs;
+	u32 cmap_fifo;
+	u_long timing_num;
+};
+
+#define FLATPANEL_SGI_1600SW	5
+
+/*
+ *  RAM we reserve for the frame buffer. This defines the maximum screen
+ *  size
+ *
+ *  The default can be overridden if the driver is compiled as a module
+ */
+
+/* set by arch/i386/kernel/setup.c */
+extern unsigned long sgivwfb_mem_phys;
+extern unsigned long sgivwfb_mem_size;
+
+static int ypan = 0;
+static int ywrap = 0;
+
+static int flatpanel_id = -1;
+
+static struct fb_fix_screeninfo sgivwfb_fix __initdata = {
+	.id		= "SGI Vis WS FB",
+	.type		= FB_TYPE_PACKED_PIXELS,
+        .visual		= FB_VISUAL_PSEUDOCOLOR,
+	.mmio_start	= DBE_REG_PHYS,
+	.mmio_len	= DBE_REG_SIZE,
+        .accel		= FB_ACCEL_NONE,
+	.line_length	= 640,
+};
+
+static struct fb_var_screeninfo sgivwfb_var __initdata = {
+	/* 640x480, 8 bpp */
+	.xres		= 640,
+	.yres		= 480,
+	.xres_virtual	= 640,
+	.yres_virtual	= 480,
+	.bits_per_pixel	= 8,
+	.red		= { 0, 8, 0 },
+	.green		= { 0, 8, 0 },
+	.blue		= { 0, 8, 0 },
+	.height		= -1,
+	.width		= -1,
+	.pixclock	= 20000,
+	.left_margin	= 64,
+	.right_margin	= 64,
+	.upper_margin	= 32,
+	.lower_margin	= 32,
+	.hsync_len	= 64,
+	.vsync_len	= 2,
+	.vmode		= FB_VMODE_NONINTERLACED
+};
+
+static struct fb_var_screeninfo sgivwfb_var1600sw __initdata = {
+	/* 1600x1024, 8 bpp */
+	.xres		= 1600,
+	.yres		= 1024,
+	.xres_virtual	= 1600,
+	.yres_virtual	= 1024,
+	.bits_per_pixel	= 8,
+	.red		= { 0, 8, 0 },
+	.green		= { 0, 8, 0 },
+	.blue		= { 0, 8, 0 },
+	.height		= -1,
+	.width		= -1,
+	.pixclock	= 9353,
+	.left_margin	= 20,
+	.right_margin	= 30,
+	.upper_margin	= 37,
+	.lower_margin	= 3,
+	.hsync_len	= 20,
+	.vsync_len	= 3,
+	.vmode		= FB_VMODE_NONINTERLACED
+};
+
+/*
+ *  Interface used by the world
+ */
+int sgivwfb_init(void);
+
+static int sgivwfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info);
+static int sgivwfb_set_par(struct fb_info *info);
+static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green,
+			     u_int blue, u_int transp,
+			     struct fb_info *info);
+static int sgivwfb_mmap(struct fb_info *info, struct file *file,
+			struct vm_area_struct *vma);
+
+static struct fb_ops sgivwfb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= sgivwfb_check_var,
+	.fb_set_par	= sgivwfb_set_par,
+	.fb_setcolreg	= sgivwfb_setcolreg,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+	.fb_cursor	= soft_cursor,
+	.fb_mmap	= sgivwfb_mmap,
+};
+
+/*
+ *  Internal routines
+ */
+static unsigned long bytes_per_pixel(int bpp)
+{
+	switch (bpp) {
+		case 8:
+			return 1;
+		case 16:
+			return 2;
+		case 32:
+			return 4;
+		default:
+			printk(KERN_INFO "sgivwfb: unsupported bpp %d\n", bpp);
+			return 0;
+	}
+}
+
+static unsigned long get_line_length(int xres_virtual, int bpp)
+{
+	return (xres_virtual * bytes_per_pixel(bpp));
+}
+
+/*
+ * Function:	dbe_TurnOffDma
+ * Parameters:	(None)
+ * Description:	This should turn off the monitor and dbe.  This is used
+ *              when switching between the serial console and the graphics
+ *              console.
+ */
+
+static void dbe_TurnOffDma(struct sgivw_par *par)
+{
+	unsigned int readVal;
+	int i;
+
+	// Check to see if things are already turned off:
+	// 1) Check to see if dbe is not using the internal dotclock.
+	// 2) Check to see if the xy counter in dbe is already off.
+
+	DBE_GETREG(ctrlstat, readVal);
+	if (GET_DBE_FIELD(CTRLSTAT, PCLKSEL, readVal) < 2)
+		return;
+
+	DBE_GETREG(vt_xy, readVal);
+	if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1)
+		return;
+
+	// Otherwise, turn off dbe
+
+	DBE_GETREG(ovr_control, readVal);
+	SET_DBE_FIELD(OVR_CONTROL, OVR_DMA_ENABLE, readVal, 0);
+	DBE_SETREG(ovr_control, readVal);
+	udelay(1000);
+	DBE_GETREG(frm_control, readVal);
+	SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, readVal, 0);
+	DBE_SETREG(frm_control, readVal);
+	udelay(1000);
+	DBE_GETREG(did_control, readVal);
+	SET_DBE_FIELD(DID_CONTROL, DID_DMA_ENABLE, readVal, 0);
+	DBE_SETREG(did_control, readVal);
+	udelay(1000);
+
+	// XXX HACK:
+	//
+	//    This was necessary for GBE--we had to wait through two
+	//    vertical retrace periods before the pixel DMA was
+	//    turned off for sure.  I've left this in for now, in
+	//    case dbe needs it.
+
+	for (i = 0; i < 10000; i++) {
+		DBE_GETREG(frm_inhwctrl, readVal);
+		if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) ==
+		    0)
+			udelay(10);
+		else {
+			DBE_GETREG(ovr_inhwctrl, readVal);
+			if (GET_DBE_FIELD
+			    (OVR_INHWCTRL, OVR_DMA_ENABLE, readVal) == 0)
+				udelay(10);
+			else {
+				DBE_GETREG(did_inhwctrl, readVal);
+				if (GET_DBE_FIELD
+				    (DID_INHWCTRL, DID_DMA_ENABLE,
+				     readVal) == 0)
+					udelay(10);
+				else
+					break;
+			}
+		}
+	}
+}
+
+/*
+ *  Set the User Defined Part of the Display. Again if par use it to get
+ *  real video mode.
+ */
+static int sgivwfb_check_var(struct fb_var_screeninfo *var, 
+			     struct fb_info *info)
+{
+	struct sgivw_par *par = (struct sgivw_par *)info->par;
+	struct dbe_timing_info *timing;
+	u_long line_length;
+	u_long min_mode;
+	int req_dot;
+	int test_mode;
+
+	/*
+	 *  FB_VMODE_CONUPDATE and FB_VMODE_SMOOTH_XPAN are equal!
+	 *  as FB_VMODE_SMOOTH_XPAN is only used internally
+	 */
+
+	if (var->vmode & FB_VMODE_CONUPDATE) {
+		var->vmode |= FB_VMODE_YWRAP;
+		var->xoffset = info->var.xoffset;
+		var->yoffset = info->var.yoffset;
+	}
+
+	/* XXX FIXME - forcing var's */
+	var->xoffset = 0;
+	var->yoffset = 0;
+
+	/* Limit bpp to 8, 16, and 32 */
+	if (var->bits_per_pixel <= 8)
+		var->bits_per_pixel = 8;
+	else if (var->bits_per_pixel <= 16)
+		var->bits_per_pixel = 16;
+	else if (var->bits_per_pixel <= 32)
+		var->bits_per_pixel = 32;
+	else
+		return -EINVAL;
+
+	var->grayscale = 0;	/* No grayscale for now */
+
+	/* determine valid resolution and timing */
+	for (min_mode = 0; min_mode < DBE_VT_SIZE; min_mode++) {
+		if (dbeVTimings[min_mode].width >= var->xres &&
+		    dbeVTimings[min_mode].height >= var->yres)
+			break;
+	}
+
+	if (min_mode == DBE_VT_SIZE)
+		return -EINVAL;	/* Resolution to high */
+
+	/* XXX FIXME - should try to pick best refresh rate */
+	/* for now, pick closest dot-clock within 3MHz */
+	req_dot = PICOS2KHZ(var->pixclock);
+	printk(KERN_INFO "sgivwfb: requested pixclock=%d ps (%d KHz)\n",
+	       var->pixclock, req_dot);
+	test_mode = min_mode;
+	while (dbeVTimings[min_mode].width == dbeVTimings[test_mode].width) {
+		if (dbeVTimings[test_mode].cfreq + 3000 > req_dot)
+			break;
+		test_mode++;
+	}
+	if (dbeVTimings[min_mode].width != dbeVTimings[test_mode].width)
+		test_mode--;
+	min_mode = test_mode;
+	timing = &dbeVTimings[min_mode];
+	printk(KERN_INFO "sgivwfb: granted dot-clock=%d KHz\n", timing->cfreq);
+
+	/* Adjust virtual resolution, if necessary */
+	if (var->xres > var->xres_virtual || (!ywrap && !ypan))
+		var->xres_virtual = var->xres;
+	if (var->yres > var->yres_virtual || (!ywrap && !ypan))
+		var->yres_virtual = var->yres;
+
+	/*
+	 *  Memory limit
+	 */
+	line_length = get_line_length(var->xres_virtual, var->bits_per_pixel);
+	if (line_length * var->yres_virtual > sgivwfb_mem_size)
+		return -ENOMEM;	/* Virtual resolution to high */
+
+	info->fix.line_length = line_length;
+
+	switch (var->bits_per_pixel) {
+	case 8:
+		var->red.offset = 0;
+		var->red.length = 8;
+		var->green.offset = 0;
+		var->green.length = 8;
+		var->blue.offset = 0;
+		var->blue.length = 8;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		break;
+	case 16:		/* RGBA 5551 */
+		var->red.offset = 11;
+		var->red.length = 5;
+		var->green.offset = 6;
+		var->green.length = 5;
+		var->blue.offset = 1;
+		var->blue.length = 5;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		break;
+	case 32:		/* RGB 8888 */
+		var->red.offset = 0;
+		var->red.length = 8;
+		var->green.offset = 8;
+		var->green.length = 8;
+		var->blue.offset = 16;
+		var->blue.length = 8;
+		var->transp.offset = 24;
+		var->transp.length = 8;
+		break;
+	}
+	var->red.msb_right = 0;
+	var->green.msb_right = 0;
+	var->blue.msb_right = 0;
+	var->transp.msb_right = 0;
+
+	/* set video timing information */
+	var->pixclock = KHZ2PICOS(timing->cfreq);
+	var->left_margin = timing->htotal - timing->hsync_end;
+	var->right_margin = timing->hsync_start - timing->width;
+	var->upper_margin = timing->vtotal - timing->vsync_end;
+	var->lower_margin = timing->vsync_start - timing->height;
+	var->hsync_len = timing->hsync_end - timing->hsync_start;
+	var->vsync_len = timing->vsync_end - timing->vsync_start;
+
+	/* Ouch. This breaks the rules but timing_num is only important if you
+	* change a video mode */
+	par->timing_num = min_mode;
+
+	printk(KERN_INFO "sgivwfb: new video mode xres=%d yres=%d bpp=%d\n",
+		var->xres, var->yres, var->bits_per_pixel);
+	printk(KERN_INFO "         vxres=%d vyres=%d\n", var->xres_virtual,
+		var->yres_virtual);
+	return 0;
+}
+
+/*
+ *  Setup flatpanel related registers.
+ */
+static void sgivwfb_setup_flatpanel(struct sgivw_par *par, struct dbe_timing_info *currentTiming)
+{
+	int fp_wid, fp_hgt, fp_vbs, fp_vbe;
+	u32 outputVal = 0;
+
+	SET_DBE_FIELD(VT_FLAGS, HDRV_INVERT, outputVal, 
+		(currentTiming->flags & FB_SYNC_HOR_HIGH_ACT) ? 0 : 1);
+	SET_DBE_FIELD(VT_FLAGS, VDRV_INVERT, outputVal, 
+		(currentTiming->flags & FB_SYNC_VERT_HIGH_ACT) ? 0 : 1);
+	DBE_SETREG(vt_flags, outputVal);
+
+	/* Turn on the flat panel */
+	switch (flatpanel_id) {
+		case FLATPANEL_SGI_1600SW:
+			fp_wid = 1600;
+			fp_hgt = 1024;
+			fp_vbs = 0;
+			fp_vbe = 1600;
+			currentTiming->pll_m = 4;
+			currentTiming->pll_n = 1;
+			currentTiming->pll_p = 0;
+			break;
+		default:
+      			fp_wid = fp_hgt = fp_vbs = fp_vbe = 0xfff;
+  	}
+
+	outputVal = 0;
+	SET_DBE_FIELD(FP_DE, FP_DE_ON, outputVal, fp_vbs);
+	SET_DBE_FIELD(FP_DE, FP_DE_OFF, outputVal, fp_vbe);
+	DBE_SETREG(fp_de, outputVal);
+	outputVal = 0;
+	SET_DBE_FIELD(FP_HDRV, FP_HDRV_OFF, outputVal, fp_wid);
+	DBE_SETREG(fp_hdrv, outputVal);
+	outputVal = 0;
+	SET_DBE_FIELD(FP_VDRV, FP_VDRV_ON, outputVal, 1);
+	SET_DBE_FIELD(FP_VDRV, FP_VDRV_OFF, outputVal, fp_hgt + 1);
+	DBE_SETREG(fp_vdrv, outputVal);
+}
+
+/*
+ *  Set the hardware according to 'par'.
+ */
+static int sgivwfb_set_par(struct fb_info *info)
+{
+	struct sgivw_par *par = info->par;
+	int i, j, htmp, temp;
+	u32 readVal, outputVal;
+	int wholeTilesX, maxPixelsPerTileX;
+	int frmWrite1, frmWrite2, frmWrite3b;
+	struct dbe_timing_info *currentTiming; /* Current Video Timing */
+	int xpmax, ypmax;	// Monitor resolution
+	int bytesPerPixel;	// Bytes per pixel
+
+	currentTiming = &dbeVTimings[par->timing_num];
+	bytesPerPixel = bytes_per_pixel(info->var.bits_per_pixel);
+	xpmax = currentTiming->width;
+	ypmax = currentTiming->height;
+
+	/* dbe_InitGraphicsBase(); */
+	/* Turn on dotclock PLL */
+	DBE_SETREG(ctrlstat, 0x20000000);
+
+	dbe_TurnOffDma(par);
+
+	/* dbe_CalculateScreenParams(); */
+	maxPixelsPerTileX = 512 / bytesPerPixel;
+	wholeTilesX = xpmax / maxPixelsPerTileX;
+	if (wholeTilesX * maxPixelsPerTileX < xpmax)
+		wholeTilesX++;
+
+	printk(KERN_DEBUG "sgivwfb: pixPerTile=%d wholeTilesX=%d\n",
+	       maxPixelsPerTileX, wholeTilesX);
+
+	/* dbe_InitGammaMap(); */
+	udelay(10);
+
+	for (i = 0; i < 256; i++) {
+		DBE_ISETREG(gmap, i, (i << 24) | (i << 16) | (i << 8));
+	}
+
+	/* dbe_TurnOn(); */
+	DBE_GETREG(vt_xy, readVal);
+	if (GET_DBE_FIELD(VT_XY, VT_FREEZE, readVal) == 1) {
+		DBE_SETREG(vt_xy, 0x00000000);
+		udelay(1);
+	} else
+		dbe_TurnOffDma(par);
+
+	/* dbe_Initdbe(); */
+	for (i = 0; i < 256; i++) {
+		for (j = 0; j < 100; j++) {
+			DBE_GETREG(cm_fifo, readVal);
+			if (readVal != 0x00000000)
+				break;
+			else
+				udelay(10);
+		}
+
+		// DBE_ISETREG(cmap, i, 0x00000000);
+		DBE_ISETREG(cmap, i, (i << 8) | (i << 16) | (i << 24));
+	}
+
+	/* dbe_InitFramebuffer(); */
+	frmWrite1 = 0;
+	SET_DBE_FIELD(FRM_SIZE_TILE, FRM_WIDTH_TILE, frmWrite1,
+		      wholeTilesX);
+	SET_DBE_FIELD(FRM_SIZE_TILE, FRM_RHS, frmWrite1, 0);
+
+	switch (bytesPerPixel) {
+	case 1:
+		SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
+			      DBE_FRM_DEPTH_8);
+		break;
+	case 2:
+		SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
+			      DBE_FRM_DEPTH_16);
+		break;
+	case 4:
+		SET_DBE_FIELD(FRM_SIZE_TILE, FRM_DEPTH, frmWrite1,
+			      DBE_FRM_DEPTH_32);
+		break;
+	}
+
+	frmWrite2 = 0;
+	SET_DBE_FIELD(FRM_SIZE_PIXEL, FB_HEIGHT_PIX, frmWrite2, ypmax);
+
+	// Tell dbe about the framebuffer location and type
+	// XXX What format is the FRM_TILE_PTR??  64K aligned address?
+	frmWrite3b = 0;
+	SET_DBE_FIELD(FRM_CONTROL, FRM_TILE_PTR, frmWrite3b,
+		      sgivwfb_mem_phys >> 9);
+	SET_DBE_FIELD(FRM_CONTROL, FRM_DMA_ENABLE, frmWrite3b, 1);
+	SET_DBE_FIELD(FRM_CONTROL, FRM_LINEAR, frmWrite3b, 1);
+
+	/* Initialize DIDs */
+
+	outputVal = 0;
+	switch (bytesPerPixel) {
+	case 1:
+		SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_I8);
+		break;
+	case 2:
+		SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGBA5);
+		break;
+	case 4:
+		SET_DBE_FIELD(WID, TYP, outputVal, DBE_CMODE_RGB8);
+		break;
+	}
+	SET_DBE_FIELD(WID, BUF, outputVal, DBE_BMODE_BOTH);
+
+	for (i = 0; i < 32; i++) {
+		DBE_ISETREG(mode_regs, i, outputVal);
+	}
+
+	/* dbe_InitTiming(); */
+	DBE_SETREG(vt_intr01, 0xffffffff);
+	DBE_SETREG(vt_intr23, 0xffffffff);
+
+	DBE_GETREG(dotclock, readVal);
+	DBE_SETREG(dotclock, readVal & 0xffff);
+
+	DBE_SETREG(vt_xymax, 0x00000000);
+	outputVal = 0;
+	SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_ON, outputVal,
+		      currentTiming->vsync_start);
+	SET_DBE_FIELD(VT_VSYNC, VT_VSYNC_OFF, outputVal,
+		      currentTiming->vsync_end);
+	DBE_SETREG(vt_vsync, outputVal);
+	outputVal = 0;
+	SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_ON, outputVal,
+		      currentTiming->hsync_start);
+	SET_DBE_FIELD(VT_HSYNC, VT_HSYNC_OFF, outputVal,
+		      currentTiming->hsync_end);
+	DBE_SETREG(vt_hsync, outputVal);
+	outputVal = 0;
+	SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_ON, outputVal,
+		      currentTiming->vblank_start);
+	SET_DBE_FIELD(VT_VBLANK, VT_VBLANK_OFF, outputVal,
+		      currentTiming->vblank_end);
+	DBE_SETREG(vt_vblank, outputVal);
+	outputVal = 0;
+	SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_ON, outputVal,
+		      currentTiming->hblank_start);
+	SET_DBE_FIELD(VT_HBLANK, VT_HBLANK_OFF, outputVal,
+		      currentTiming->hblank_end - 3);
+	DBE_SETREG(vt_hblank, outputVal);
+	outputVal = 0;
+	SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_ON, outputVal,
+		      currentTiming->vblank_start);
+	SET_DBE_FIELD(VT_VCMAP, VT_VCMAP_OFF, outputVal,
+		      currentTiming->vblank_end);
+	DBE_SETREG(vt_vcmap, outputVal);
+	outputVal = 0;
+	SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_ON, outputVal,
+		      currentTiming->hblank_start);
+	SET_DBE_FIELD(VT_HCMAP, VT_HCMAP_OFF, outputVal,
+		      currentTiming->hblank_end - 3);
+	DBE_SETREG(vt_hcmap, outputVal);
+
+	if (flatpanel_id != -1)
+		sgivwfb_setup_flatpanel(par, currentTiming);
+
+	outputVal = 0;
+	temp = currentTiming->vblank_start - currentTiming->vblank_end - 1;
+	if (temp > 0)
+		temp = -temp;
+
+	SET_DBE_FIELD(DID_START_XY, DID_STARTY, outputVal, (u32) temp);
+	if (currentTiming->hblank_end >= 20)
+		SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal,
+			      currentTiming->hblank_end - 20);
+	else
+		SET_DBE_FIELD(DID_START_XY, DID_STARTX, outputVal,
+			      currentTiming->htotal - (20 -
+						       currentTiming->
+						       hblank_end));
+	DBE_SETREG(did_start_xy, outputVal);
+
+	outputVal = 0;
+	SET_DBE_FIELD(CRS_START_XY, CRS_STARTY, outputVal,
+		      (u32) (temp + 1));
+	if (currentTiming->hblank_end >= DBE_CRS_MAGIC)
+		SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal,
+			      currentTiming->hblank_end - DBE_CRS_MAGIC);
+	else
+		SET_DBE_FIELD(CRS_START_XY, CRS_STARTX, outputVal,
+			      currentTiming->htotal - (DBE_CRS_MAGIC -
+						       currentTiming->
+						       hblank_end));
+	DBE_SETREG(crs_start_xy, outputVal);
+
+	outputVal = 0;
+	SET_DBE_FIELD(VC_START_XY, VC_STARTY, outputVal, (u32) temp);
+	SET_DBE_FIELD(VC_START_XY, VC_STARTX, outputVal,
+		      currentTiming->hblank_end - 4);
+	DBE_SETREG(vc_start_xy, outputVal);
+
+	DBE_SETREG(frm_size_tile, frmWrite1);
+	DBE_SETREG(frm_size_pixel, frmWrite2);
+
+	outputVal = 0;
+	SET_DBE_FIELD(DOTCLK, M, outputVal, currentTiming->pll_m - 1);
+	SET_DBE_FIELD(DOTCLK, N, outputVal, currentTiming->pll_n - 1);
+	SET_DBE_FIELD(DOTCLK, P, outputVal, currentTiming->pll_p);
+	SET_DBE_FIELD(DOTCLK, RUN, outputVal, 1);
+	DBE_SETREG(dotclock, outputVal);
+
+	udelay(11 * 1000);
+
+	DBE_SETREG(vt_vpixen, 0xffffff);
+	DBE_SETREG(vt_hpixen, 0xffffff);
+
+	outputVal = 0;
+	SET_DBE_FIELD(VT_XYMAX, VT_MAXX, outputVal, currentTiming->htotal);
+	SET_DBE_FIELD(VT_XYMAX, VT_MAXY, outputVal, currentTiming->vtotal);
+	DBE_SETREG(vt_xymax, outputVal);
+
+	outputVal = frmWrite1;
+	SET_DBE_FIELD(FRM_SIZE_TILE, FRM_FIFO_RESET, outputVal, 1);
+	DBE_SETREG(frm_size_tile, outputVal);
+	DBE_SETREG(frm_size_tile, frmWrite1);
+
+	outputVal = 0;
+	SET_DBE_FIELD(OVR_WIDTH_TILE, OVR_FIFO_RESET, outputVal, 1);
+	DBE_SETREG(ovr_width_tile, outputVal);
+	DBE_SETREG(ovr_width_tile, 0);
+
+	DBE_SETREG(frm_control, frmWrite3b);
+	DBE_SETREG(did_control, 0);
+
+	// Wait for dbe to take frame settings
+	for (i = 0; i < 100000; i++) {
+		DBE_GETREG(frm_inhwctrl, readVal);
+		if (GET_DBE_FIELD(FRM_INHWCTRL, FRM_DMA_ENABLE, readVal) !=
+		    0)
+			break;
+		else
+			udelay(1);
+	}
+
+	if (i == 100000)
+		printk(KERN_INFO
+		       "sgivwfb: timeout waiting for frame DMA enable.\n");
+
+	outputVal = 0;
+	htmp = currentTiming->hblank_end - 19;
+	if (htmp < 0)
+		htmp += currentTiming->htotal;	/* allow blank to wrap around */
+	SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_ON, outputVal, htmp);
+	SET_DBE_FIELD(VT_HPIXEN, VT_HPIXEN_OFF, outputVal,
+		      ((htmp + currentTiming->width -
+			2) % currentTiming->htotal));
+	DBE_SETREG(vt_hpixen, outputVal);
+
+	outputVal = 0;
+	SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_OFF, outputVal,
+		      currentTiming->vblank_start);
+	SET_DBE_FIELD(VT_VPIXEN, VT_VPIXEN_ON, outputVal,
+		      currentTiming->vblank_end);
+	DBE_SETREG(vt_vpixen, outputVal);
+
+	// Turn off mouse cursor
+	par->regs->crs_ctl = 0;
+
+	// XXX What's this section for??
+	DBE_GETREG(ctrlstat, readVal);
+	readVal &= 0x02000000;
+
+	if (readVal != 0) {
+		DBE_SETREG(ctrlstat, 0x30000000);
+	}
+	return 0;
+}
+
+/*
+ *  Set a single color register. The values supplied are already
+ *  rounded down to the hardware's capabilities (according to the
+ *  entries in the var structure). Return != 0 for invalid regno.
+ */
+
+static int sgivwfb_setcolreg(u_int regno, u_int red, u_int green,
+			     u_int blue, u_int transp,
+			     struct fb_info *info)
+{
+	struct sgivw_par *par = (struct sgivw_par *) info->par;
+
+	if (regno > 255)
+		return 1;
+	red >>= 8;
+	green >>= 8;
+	blue >>= 8;
+
+	/* wait for the color map FIFO to have a free entry */
+	while (par->cmap_fifo == 0)
+		par->cmap_fifo = par->regs->cm_fifo;
+
+	par->regs->cmap[regno] = (red << 24) | (green << 16) | (blue << 8);
+	par->cmap_fifo--;	/* assume FIFO is filling up */
+	return 0;
+}
+
+static int sgivwfb_mmap(struct fb_info *info, struct file *file,
+			struct vm_area_struct *vma)
+{
+	unsigned long size = vma->vm_end - vma->vm_start;
+	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+
+	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+		return -EINVAL;
+	if (offset + size > sgivwfb_mem_size)
+		return -EINVAL;
+	offset += sgivwfb_mem_phys;
+	pgprot_val(vma->vm_page_prot) =
+	    pgprot_val(vma->vm_page_prot) | _PAGE_PCD;
+	vma->vm_flags |= VM_IO;
+	if (remap_pfn_range(vma, vma->vm_start, offset >> PAGE_SHIFT,
+						size, vma->vm_page_prot))
+		return -EAGAIN;
+	vma->vm_file = file;
+	printk(KERN_DEBUG "sgivwfb: mmap framebuffer P(%lx)->V(%lx)\n",
+	       offset, vma->vm_start);
+	return 0;
+}
+
+int __init sgivwfb_setup(char *options)
+{
+	char *this_opt;
+
+	if (!options || !*options)
+		return 0;
+
+	while ((this_opt = strsep(&options, ",")) != NULL) {
+		if (!strncmp(this_opt, "monitor:", 8)) {
+			if (!strncmp(this_opt + 8, "crt", 3))
+				flatpanel_id = -1;
+			else if (!strncmp(this_opt + 8, "1600sw", 6))
+				flatpanel_id = FLATPANEL_SGI_1600SW;
+		}
+	}
+	return 0;
+}
+
+/*
+ *  Initialisation
+ */
+static void sgivwfb_release(struct device *device)
+{
+}
+
+static int __init sgivwfb_probe(struct device *device)
+{
+	struct platform_device *dev = to_platform_device(device);
+	struct sgivw_par *par;
+	struct fb_info *info;
+	char *monitor;
+
+	info = framebuffer_alloc(sizeof(struct sgivw_par) + sizeof(u32) * 256, &dev->dev);
+	if (!info)
+		return -ENOMEM;
+	par = info->par;
+
+	if (!request_mem_region(DBE_REG_PHYS, DBE_REG_SIZE, "sgivwfb")) {
+		printk(KERN_ERR "sgivwfb: couldn't reserve mmio region\n");
+		framebuffer_release(info);
+		return -EBUSY;
+	}
+
+	par->regs = (struct asregs *) ioremap_nocache(DBE_REG_PHYS, DBE_REG_SIZE);
+	if (!par->regs) {
+		printk(KERN_ERR "sgivwfb: couldn't ioremap registers\n");
+		goto fail_ioremap_regs;
+	}
+
+	mtrr_add(sgivwfb_mem_phys, sgivwfb_mem_size, MTRR_TYPE_WRCOMB, 1);
+
+	sgivwfb_fix.smem_start = sgivwfb_mem_phys;
+	sgivwfb_fix.smem_len = sgivwfb_mem_size;
+	sgivwfb_fix.ywrapstep = ywrap;
+	sgivwfb_fix.ypanstep = ypan;
+
+	info->fix = sgivwfb_fix;
+
+	switch (flatpanel_id) {
+		case FLATPANEL_SGI_1600SW:
+			info->var = sgivwfb_var1600sw;
+			monitor = "SGI 1600SW flatpanel";
+			break;
+		default:
+			info->var = sgivwfb_var;
+			monitor = "CRT";
+	}
+
+	printk(KERN_INFO "sgivwfb: %s monitor selected\n", monitor);
+
+	info->fbops = &sgivwfb_ops;
+	info->pseudo_palette = (void *) (par + 1);
+	info->flags = FBINFO_DEFAULT;
+
+	info->screen_base = ioremap_nocache((unsigned long) sgivwfb_mem_phys, sgivwfb_mem_size);
+	if (!info->screen_base) {
+		printk(KERN_ERR "sgivwfb: couldn't ioremap screen_base\n");
+		goto fail_ioremap_fbmem;
+	}
+
+	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0)
+		goto fail_color_map;
+
+	if (register_framebuffer(info) < 0) {
+		printk(KERN_ERR "sgivwfb: couldn't register framebuffer\n");
+		goto fail_register_framebuffer;
+	}
+
+	dev_set_drvdata(&dev->dev, info);
+
+	printk(KERN_INFO "fb%d: SGI DBE frame buffer device, using %ldK of video memory at %#lx\n",      
+		info->node, sgivwfb_mem_size >> 10, sgivwfb_mem_phys);
+	return 0;
+
+fail_register_framebuffer:
+	fb_dealloc_cmap(&info->cmap);
+fail_color_map:
+	iounmap((char *) info->screen_base);
+fail_ioremap_fbmem:
+	iounmap(par->regs);
+fail_ioremap_regs:
+	release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE);
+	framebuffer_release(info);
+	return -ENXIO;
+}
+
+static int sgivwfb_remove(struct device *device)
+{
+	struct fb_info *info = dev_get_drvdata(device);
+
+	if (info) {
+		struct sgivw_par *par = info->par;
+
+		unregister_framebuffer(info);
+		dbe_TurnOffDma(par);
+		iounmap(par->regs);
+		iounmap(info->screen_base);
+		release_mem_region(DBE_REG_PHYS, DBE_REG_SIZE);
+	}
+	return 0;
+}
+
+static struct device_driver sgivwfb_driver = {
+	.name	= "sgivwfb",
+	.bus	= &platform_bus_type,
+	.probe	= sgivwfb_probe,
+	.remove	= sgivwfb_remove,
+};
+
+static struct platform_device sgivwfb_device = {
+	.name	= "sgivwfb",
+	.id	= 0,
+	.dev	= {
+		.release = sgivwfb_release,
+	}
+};
+
+int __init sgivwfb_init(void)
+{
+	int ret;
+
+#ifndef MODULE
+	char *option = NULL;
+
+	if (fb_get_options("sgivwfb", &option))
+		return -ENODEV;
+	sgivwfb_setup(option);
+#endif
+	ret = driver_register(&sgivwfb_driver);
+	if (!ret) {
+		ret = platform_device_register(&sgivwfb_device);
+		if (ret)
+			driver_unregister(&sgivwfb_driver);
+	}
+	return ret;
+}
+
+module_init(sgivwfb_init);
+
+#ifdef MODULE
+MODULE_LICENSE("GPL");
+
+static void __exit sgivwfb_exit(void)
+{
+	platform_device_unregister(&sgivwfb_device);
+	driver_unregister(&sgivwfb_driver);
+}
+
+module_exit(sgivwfb_exit);
+
+#endif				/* MODULE */