Merge remote branch 'origin' into secretlab/next-devicetree

Merging in current state of Linus' tree to deal with merge conflicts and build failures in vio.c after merge. Conflicts: drivers/i2c/busses/i2c-cpm.c drivers/i2c/busses/i2c-mpc.c drivers/net/gianfar.c Also fixed up one line in arch/powerpc/kernel/vio.c to use the correct node pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
author: Grant Likely <grant.likely@secretlab.ca> 2010-05-22 00:36:56 -0600
committer: Grant Likely <grant.likely@secretlab.ca> 2010-05-22 00:36:56 -0600
commit: cf9b59e9d3e008591d1f54830f570982bb307a0d (patch)
tree: 113478ce8fd8c832ba726ffdf59b82cb46356476 /drivers/video
parent: 44504b2bebf8b5823c59484e73096a7d6574471d (diff)
parent: f4b87dee923342505e1ddba8d34ce9de33e75050 (diff)
54 files changed, 3034 insertions, 770 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6e16244f3ed..1e6fec48797 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1511,6 +1511,7 @@ config FB_VIA
        select FB_CFB_IMAGEBLIT
        select I2C_ALGOBIT
        select I2C
+       select GPIOLIB
        help
 	  This is the frame buffer device driver for Graphics chips of VIA
 	  UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
@@ -1520,6 +1521,21 @@ config FB_VIA
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called viafb.
+
+if FB_VIA
+
+config FB_VIA_DIRECT_PROCFS
+	bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
+	depends on FB_VIA
+	default n
+	help
+	  Allow direct hardware access to some output registers via procfs.
+	  This is dangerous but may provide the only chance to get the
+	  correct output device configuration.
+	  Its use is strongly discouraged.
+
+endif
+
 config FB_NEOMAGIC
 	tristate "NeoMagic display support"
 	depends on FB && PCI
@@ -2186,7 +2202,6 @@ config FB_MSM
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	default y
 
 config FB_MX3
 	tristate "MX3 Framebuffer support"
diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c
index dca48df9844..e5d6b56d444 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/amifb.c
@@ -50,8 +50,9 @@
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-
+#include <linux/platform_device.h>
 #include <linux/uaccess.h>
+
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/amigahw.h>
@@ -1135,7 +1136,7 @@ static int amifb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg
 	 * Interface to the low level console driver
 	 */
 
-static void amifb_deinit(void);
+static void amifb_deinit(struct platform_device *pdev);
 
 	/*
 	 * Internal routines
@@ -2246,7 +2247,7 @@ static inline void chipfree(void)
 	 * Initialisation
 	 */
 
-static int __init amifb_init(void)
+static int __init amifb_probe(struct platform_device *pdev)
 {
 	int tag, i, err = 0;
 	u_long chipptr;
@@ -2261,16 +2262,6 @@ static int __init amifb_init(void)
 	}
 	amifb_setup(option);
 #endif
-	if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_VIDEO))
-		return -ENODEV;
-
-	/*
-	 * We request all registers starting from bplpt[0]
-	 */
-	if (!request_mem_region(CUSTOM_PHYSADDR+0xe0, 0x120,
-				"amifb [Denise/Lisa]"))
-		return -EBUSY;
-
 	custom.dmacon = DMAF_ALL | DMAF_MASTER;
 
 	switch (amiga_chipset) {
@@ -2377,6 +2368,7 @@ default_chipset:
 	fb_info.fbops = &amifb_ops;
 	fb_info.par = &currentpar;
 	fb_info.flags = FBINFO_DEFAULT;
+	fb_info.device = &pdev->dev;
 
 	if (!fb_find_mode(&fb_info.var, &fb_info, mode_option, ami_modedb,
 			  NUM_TOTAL_MODES, &ami_modedb[defmode], 4)) {
@@ -2451,18 +2443,18 @@ default_chipset:
 	return 0;
 
 amifb_error:
-	amifb_deinit();
+	amifb_deinit(pdev);
 	return err;
 }
 
-static void amifb_deinit(void)
+static void amifb_deinit(struct platform_device *pdev)
 {
 	if (fb_info.cmap.len)
 		fb_dealloc_cmap(&fb_info.cmap);
+	fb_dealloc_cmap(&fb_info.cmap);
 	chipfree();
 	if (videomemory)
 		iounmap((void*)videomemory);
-	release_mem_region(CUSTOM_PHYSADDR+0xe0, 0x120);
 	custom.dmacon = DMAF_ALL | DMAF_MASTER;
 }
 
@@ -3794,14 +3786,35 @@ static void ami_rebuild_copper(void)
 	}
 }
 
-static void __exit amifb_exit(void)
+static int __exit amifb_remove(struct platform_device *pdev)
 {
 	unregister_framebuffer(&fb_info);
-	amifb_deinit();
+	amifb_deinit(pdev);
 	amifb_video_off();
+	return 0;
+}
+
+static struct platform_driver amifb_driver = {
+	.remove = __exit_p(amifb_remove),
+	.driver   = {
+		.name	= "amiga-video",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init amifb_init(void)
+{
+	return platform_driver_probe(&amifb_driver, amifb_probe);
 }
 
 module_init(amifb_init);
+
+static void __exit amifb_exit(void)
+{
+	platform_driver_unregister(&amifb_driver);
+}
+
 module_exit(amifb_exit);
 
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:amiga-video");
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 6c37e8ee5ef..3c1e13ed1cb 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -2099,7 +2099,7 @@ static ssize_t radeon_show_one_edid(char *buf, loff_t off, size_t count, const u
 }
 
 
-static ssize_t radeon_show_edid1(struct kobject *kobj,
+static ssize_t radeon_show_edid1(struct file *filp, struct kobject *kobj,
 				 struct bin_attribute *bin_attr,
 				 char *buf, loff_t off, size_t count)
 {
@@ -2112,7 +2112,7 @@ static ssize_t radeon_show_edid1(struct kobject *kobj,
 }
 
 
-static ssize_t radeon_show_edid2(struct kobject *kobj,
+static ssize_t radeon_show_edid2(struct file *filp, struct kobject *kobj,
 				 struct bin_attribute *bin_attr,
 				 char *buf, loff_t off, size_t count)
 {
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
index 44e49c28b2a..c2ec3dcd4e9 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -488,9 +488,9 @@ static int __devinit bfin_t350mcqb_probe(struct platform_device *pdev)
 	fbinfo->fbops = &bfin_t350mcqb_fb_ops;
 	fbinfo->flags = FBINFO_FLAG_DEFAULT;
 
-	info->fb_buffer =
-	    dma_alloc_coherent(NULL, fbinfo->fix.smem_len, &info->dma_handle,
-			       GFP_KERNEL);
+	info->fb_buffer = dma_alloc_coherent(NULL, fbinfo->fix.smem_len +
+				ACTIVE_VIDEO_MEM_OFFSET,
+				&info->dma_handle, GFP_KERNEL);
 
 	if (NULL == info->fb_buffer) {
 		printk(KERN_ERR DRIVER_NAME
@@ -568,8 +568,8 @@ out7:
 out6:
 	fb_dealloc_cmap(&fbinfo->cmap);
 out4:
-	dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
-			  info->dma_handle);
+	dma_free_coherent(NULL, fbinfo->fix.smem_len + ACTIVE_VIDEO_MEM_OFFSET,
+			 info->fb_buffer, info->dma_handle);
 out3:
 	framebuffer_release(fbinfo);
 out2:
@@ -592,8 +592,9 @@ static int __devexit bfin_t350mcqb_remove(struct platform_device *pdev)
 	free_irq(info->irq, info);
 
 	if (info->fb_buffer != NULL)
-		dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
-				  info->dma_handle);
+		dma_free_coherent(NULL, fbinfo->fix.smem_len +
+			ACTIVE_VIDEO_MEM_OFFSET, info->fb_buffer,
+			info->dma_handle);
 
 	fb_dealloc_cmap(&fbinfo->cmap);
 
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index 8d8dfda2f86..6df7c54db0a 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -299,6 +299,7 @@ static const struct zorro_device_id cirrusfb_zorro_table[] = {
 	},
 	{ 0 }
 };
+MODULE_DEVICE_TABLE(zorro, cirrusfb_zorro_table);
 
 static const struct {
 	zorro_id id2;
diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/cobalt_lcdfb.c
index 5eb61b5adfe..42fe155aba0 100644
--- a/drivers/video/cobalt_lcdfb.c
+++ b/drivers/video/cobalt_lcdfb.c
@@ -123,7 +123,7 @@ static void lcd_clear(struct fb_info *info)
 	lcd_write_control(info, LCD_RESET);
 }
 
-static struct fb_fix_screeninfo cobalt_lcdfb_fix __initdata = {
+static struct fb_fix_screeninfo cobalt_lcdfb_fix __devinitdata = {
 	.id		= "cobalt-lcd",
 	.type		= FB_TYPE_TEXT,
 	.type_aux	= FB_AUX_TEXT_MDA,
diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c
index 581d2dbf675..4a56f46af40 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -49,6 +49,7 @@ enum {
 	M_MBP_2,	/* MacBook Pro 2nd gen */
 	M_MBP_SR,	/* MacBook Pro (Santa Rosa) */
 	M_MBP_4,	/* MacBook Pro, 4th gen */
+	M_MBP_5_1,    /* MacBook Pro, 5,1th gen */
 	M_UNKNOWN	/* placeholder */
 };
 
@@ -70,6 +71,7 @@ static struct efifb_dmi_info {
 	[M_MBP_2] = { "mbp2", 0, 0, 0, 0 }, /* placeholder */
 	[M_MBP_SR] = { "mbp3", 0x80030000, 2048 * 4, 1440, 900 },
 	[M_MBP_4] = { "mbp4", 0xc0060000, 2048 * 4, 1920, 1200 },
+	[M_MBP_5_1] = { "mbp51", 0xc0010000, 2048 * 4, 1440, 900 },
 	[M_UNKNOWN] = { NULL, 0, 0, 0, 0 }
 };
 
@@ -106,6 +108,7 @@ static struct dmi_system_id __initdata dmi_system_table[] = {
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro3,1", M_MBP_SR),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro3,1", M_MBP_SR),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro4,1", M_MBP_4),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,1", M_MBP_5_1),
 	{},
 };
 
@@ -165,7 +168,7 @@ static void efifb_destroy(struct fb_info *info)
 {
 	if (info->screen_base)
 		iounmap(info->screen_base);
-	release_mem_region(info->aperture_base, info->aperture_size);
+	release_mem_region(info->apertures->ranges[0].base, info->apertures->ranges[0].size);
 	framebuffer_release(info);
 }
 
@@ -289,8 +292,13 @@ static int __devinit efifb_probe(struct platform_device *dev)
 	info->pseudo_palette = info->par;
 	info->par = NULL;
 
-	info->aperture_base = efifb_fix.smem_start;
-	info->aperture_size = size_remap;
+	info->apertures = alloc_apertures(1);
+	if (!info->apertures) {
+		err = -ENOMEM;
+		goto err_release_fb;
+	}
+	info->apertures->ranges[0].base = efifb_fix.smem_start;
+	info->apertures->ranges[0].size = size_remap;
 
 	info->screen_base = ioremap(efifb_fix.smem_start, efifb_fix.smem_len);
 	if (!info->screen_base) {
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index a15b44e9c00..731fce64df9 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1468,16 +1468,70 @@ static int fb_check_foreignness(struct fb_info *fi)
 	return 0;
 }
 
-static bool fb_do_apertures_overlap(struct fb_info *gen, struct fb_info *hw)
+static bool apertures_overlap(struct aperture *gen, struct aperture *hw)
 {
 	/* is the generic aperture base the same as the HW one */
-	if (gen->aperture_base == hw->aperture_base)
+	if (gen->base == hw->base)
 		return true;
 	/* is the generic aperture base inside the hw base->hw base+size */
-	if (gen->aperture_base > hw->aperture_base && gen->aperture_base <= hw->aperture_base + hw->aperture_size)
+	if (gen->base > hw->base && gen->base <= hw->base + hw->size)
 		return true;
 	return false;
 }
+
+static bool fb_do_apertures_overlap(struct apertures_struct *gena,
+				    struct apertures_struct *hwa)
+{
+	int i, j;
+	if (!hwa || !gena)
+		return false;
+
+	for (i = 0; i < hwa->count; ++i) {
+		struct aperture *h = &hwa->ranges[i];
+		for (j = 0; j < gena->count; ++j) {
+			struct aperture *g = &gena->ranges[j];
+			printk(KERN_DEBUG "checking generic (%llx %llx) vs hw (%llx %llx)\n",
+				(unsigned long long)g->base,
+				(unsigned long long)g->size,
+				(unsigned long long)h->base,
+				(unsigned long long)h->size);
+			if (apertures_overlap(g, h))
+				return true;
+		}
+	}
+
+	return false;
+}
+
+#define VGA_FB_PHYS 0xA0000
+void remove_conflicting_framebuffers(struct apertures_struct *a,
+				     const char *name, bool primary)
+{
+	int i;
+
+	/* check all firmware fbs and kick off if the base addr overlaps */
+	for (i = 0 ; i < FB_MAX; i++) {
+		struct apertures_struct *gen_aper;
+		if (!registered_fb[i])
+			continue;
+
+		if (!(registered_fb[i]->flags & FBINFO_MISC_FIRMWARE))
+			continue;
+
+		gen_aper = registered_fb[i]->apertures;
+		if (fb_do_apertures_overlap(gen_aper, a) ||
+			(primary && gen_aper && gen_aper->count &&
+			 gen_aper->ranges[0].base == VGA_FB_PHYS)) {
+
+			printk(KERN_ERR "fb: conflicting fb hw usage "
+			       "%s vs %s - removing generic driver\n",
+			       name, registered_fb[i]->fix.id);
+			unregister_framebuffer(registered_fb[i]);
+		}
+	}
+}
+EXPORT_SYMBOL(remove_conflicting_framebuffers);
+
 /**
  *	register_framebuffer - registers a frame buffer device
  *	@fb_info: frame buffer info structure
@@ -1501,21 +1555,8 @@ register_framebuffer(struct fb_info *fb_info)
 	if (fb_check_foreignness(fb_info))
 		return -ENOSYS;
 
-	/* check all firmware fbs and kick off if the base addr overlaps */
-	for (i = 0 ; i < FB_MAX; i++) {
-		if (!registered_fb[i])
-			continue;
-
-		if (registered_fb[i]->flags & FBINFO_MISC_FIRMWARE) {
-			if (fb_do_apertures_overlap(registered_fb[i], fb_info)) {
-				printk(KERN_ERR "fb: conflicting fb hw usage "
-				       "%s vs %s - removing generic driver\n",
-				       fb_info->fix.id,
-				       registered_fb[i]->fix.id);
-				unregister_framebuffer(registered_fb[i]);
-			}
-		}
-	}
+	remove_conflicting_framebuffers(fb_info->apertures, fb_info->fix.id,
+					 fb_is_primary_device(fb_info));
 
 	num_registered_fb++;
 	for (i = 0 ; i < FB_MAX; i++)
diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c
index 81aa3129c17..0a08f134122 100644
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbsysfs.c
@@ -80,6 +80,7 @@ EXPORT_SYMBOL(framebuffer_alloc);
  */
 void framebuffer_release(struct fb_info *info)
 {
+	kfree(info->apertures);
 	kfree(info);
 }
 EXPORT_SYMBOL(framebuffer_release);
diff --git a/drivers/video/fm2fb.c b/drivers/video/fm2fb.c
index 6c91c61cdb6..1b0feb8e724 100644
--- a/drivers/video/fm2fb.c
+++ b/drivers/video/fm2fb.c
@@ -219,6 +219,7 @@ static struct zorro_device_id fm2fb_devices[] __devinitdata = {
 	{ ZORRO_PROD_HELFRICH_RAINBOW_II },
 	{ 0 }
 };
+MODULE_DEVICE_TABLE(zorro, fm2fb_devices);
 
 static struct zorro_driver fm2fb_driver = {
 	.name		= "fm2fb",
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 772ba3f45e6..7cfc170bce1 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -387,7 +387,8 @@ static void sdc_disable_channel(struct mx3fb_info *mx3_fbi)
 
 	spin_unlock_irqrestore(&mx3fb->lock, flags);
 
-	mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan);
+	mx3_fbi->txd->chan->device->device_control(mx3_fbi->txd->chan,
+						   DMA_TERMINATE_ALL, 0);
 	mx3_fbi->txd = NULL;
 	mx3_fbi->cookie = -EINVAL;
 }
diff --git a/drivers/video/offb.c b/drivers/video/offb.c
index 61f8b8f919b..46dda7d8aae 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/offb.c
@@ -285,7 +285,7 @@ static void offb_destroy(struct fb_info *info)
 {
 	if (info->screen_base)
 		iounmap(info->screen_base);
-	release_mem_region(info->aperture_base, info->aperture_size);
+	release_mem_region(info->apertures->ranges[0].base, info->apertures->ranges[0].size);
 	framebuffer_release(info);
 }
 
@@ -491,8 +491,11 @@ static void __init offb_init_fb(const char *name, const char *full_name,
 	var->vmode = FB_VMODE_NONINTERLACED;
 
 	/* set offb aperture size for generic probing */
-	info->aperture_base = address;
-	info->aperture_size = fix->smem_len;
+	info->apertures = alloc_apertures(1);
+	if (!info->apertures)
+		goto out_aper;
+	info->apertures->ranges[0].base = address;
+	info->apertures->ranges[0].size = fix->smem_len;
 
 	info->fbops = &offb_ops;
 	info->screen_base = ioremap(address, fix->smem_len);
@@ -501,17 +504,20 @@ static void __init offb_init_fb(const char *name, const char *full_name,
 
 	fb_alloc_cmap(&info->cmap, 256, 0);
 
-	if (register_framebuffer(info) < 0) {
-		iounmap(par->cmap_adr);
-		par->cmap_adr = NULL;
-		iounmap(info->screen_base);
-		framebuffer_release(info);
-		release_mem_region(res_start, res_size);
-		return;
-	}
+	if (register_framebuffer(info) < 0)
+		goto out_err;
 
 	printk(KERN_INFO "fb%d: Open Firmware frame buffer device on %s\n",
 	       info->node, full_name);
+	return;
+
+out_err:
+	iounmap(info->screen_base);
+out_aper:
+	iounmap(par->cmap_adr);
+	par->cmap_adr = NULL;
+	framebuffer_release(info);
+	release_mem_region(res_start, res_size);
 }
 
 
diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
index dfb57ee5086..881c9f77c75 100644
--- a/drivers/video/omap2/displays/Kconfig
+++ b/drivers/video/omap2/displays/Kconfig
@@ -10,6 +10,7 @@ config PANEL_GENERIC
 config PANEL_SHARP_LS037V7DW01
         tristate "Sharp LS037V7DW01 LCD Panel"
         depends on OMAP2_DSS
+        select BACKLIGHT_CLASS_DEVICE
         help
           LCD Panel used in TI's SDP3430 and EVM boards
 
@@ -33,8 +34,14 @@ config PANEL_TOPPOLY_TDO35S
 
 config PANEL_TPO_TD043MTEA1
         tristate "TPO TD043MTEA1 LCD Panel"
-        depends on OMAP2_DSS && I2C
+        depends on OMAP2_DSS && SPI
         help
           LCD Panel used in OMAP3 Pandora
 
+config PANEL_ACX565AKM
+	tristate "ACX565AKM Panel"
+	depends on OMAP2_DSS_SDI
+	select BACKLIGHT_CLASS_DEVICE
+	help
+	  This is the LCD panel used on Nokia N900
 endmenu
diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
index e2bb32168de..aa386095d7c 100644
--- a/drivers/video/omap2/displays/Makefile
+++ b/drivers/video/omap2/displays/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o
 obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
 obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o
 obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
+obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o
diff --git a/drivers/video/omap2/displays/panel-acx565akm.c b/drivers/video/omap2/displays/panel-acx565akm.c
new file mode 100644
index 00000000000..1f8eb70e293
--- /dev/null
+++ b/drivers/video/omap2/displays/panel-acx565akm.c
@@ -0,0 +1,819 @@
+/*
+ * Support for ACX565AKM LCD Panel used on Nokia N900
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Original Driver Author: Imre Deak <imre.deak@nokia.com>
+ * Based on panel-generic.c by Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ * Adapted to new DSS2 framework: Roger Quadros <roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+
+#include <plat/display.h>
+
+#define MIPID_CMD_READ_DISP_ID		0x04
+#define MIPID_CMD_READ_RED		0x06
+#define MIPID_CMD_READ_GREEN		0x07
+#define MIPID_CMD_READ_BLUE		0x08
+#define MIPID_CMD_READ_DISP_STATUS	0x09
+#define MIPID_CMD_RDDSDR		0x0F
+#define MIPID_CMD_SLEEP_IN		0x10
+#define MIPID_CMD_SLEEP_OUT		0x11
+#define MIPID_CMD_DISP_OFF		0x28
+#define MIPID_CMD_DISP_ON		0x29
+#define MIPID_CMD_WRITE_DISP_BRIGHTNESS	0x51
+#define MIPID_CMD_READ_DISP_BRIGHTNESS	0x52
+#define MIPID_CMD_WRITE_CTRL_DISP	0x53
+
+#define CTRL_DISP_BRIGHTNESS_CTRL_ON	(1 << 5)
+#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON	(1 << 4)
+#define CTRL_DISP_BACKLIGHT_ON		(1 << 2)
+#define CTRL_DISP_AUTO_BRIGHTNESS_ON	(1 << 1)
+
+#define MIPID_CMD_READ_CTRL_DISP	0x54
+#define MIPID_CMD_WRITE_CABC		0x55
+#define MIPID_CMD_READ_CABC		0x56
+
+#define MIPID_VER_LPH8923		3
+#define MIPID_VER_LS041Y3		4
+#define MIPID_VER_L4F00311		8
+#define MIPID_VER_ACX565AKM		9
+
+struct acx565akm_device {
+	char		*name;
+	int		enabled;
+	int		model;
+	int		revision;
+	u8		display_id[3];
+	unsigned	has_bc:1;
+	unsigned	has_cabc:1;
+	unsigned	cabc_mode;
+	unsigned long	hw_guard_end;		/* next value of jiffies
+						   when we can issue the
+						   next sleep in/out command */
+	unsigned long	hw_guard_wait;		/* max guard time in jiffies */
+
+	struct spi_device	*spi;
+	struct mutex		mutex;
+
+	struct omap_dss_device	*dssdev;
+	struct backlight_device *bl_dev;
+};
+
+static struct acx565akm_device acx_dev;
+static int acx565akm_bl_update_status(struct backlight_device *dev);
+
+/*--------------------MIPID interface-----------------------------*/
+
+static void acx565akm_transfer(struct acx565akm_device *md, int cmd,
+			      const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+	struct spi_message	m;
+	struct spi_transfer	*x, xfer[5];
+	int			r;
+
+	BUG_ON(md->spi == NULL);
+
+	spi_message_init(&m);
+
+	memset(xfer, 0, sizeof(xfer));
+	x = &xfer[0];
+
+	cmd &=  0xff;
+	x->tx_buf = &cmd;
+	x->bits_per_word = 9;
+	x->len = 2;
+
+	if (rlen > 1 && wlen == 0) {
+		/*
+		 * Between the command and the response data there is a
+		 * dummy clock cycle. Add an extra bit after the command
+		 * word to account for this.
+		 */
+		x->bits_per_word = 10;
+		cmd <<= 1;
+	}
+	spi_message_add_tail(x, &m);
+
+	if (wlen) {
+		x++;
+		x->tx_buf = wbuf;
+		x->len = wlen;
+		x->bits_per_word = 9;
+		spi_message_add_tail(x, &m);
+	}
+
+	if (rlen) {
+		x++;
+		x->rx_buf	= rbuf;
+		x->len		= rlen;
+		spi_message_add_tail(x, &m);
+	}
+
+	r = spi_sync(md->spi, &m);
+	if (r < 0)
+		dev_dbg(&md->spi->dev, "spi_sync %d\n", r);
+}
+
+static inline void acx565akm_cmd(struct acx565akm_device *md, int cmd)
+{
+	acx565akm_transfer(md, cmd, NULL, 0, NULL, 0);
+}
+
+static inline void acx565akm_write(struct acx565akm_device *md,
+			       int reg, const u8 *buf, int len)
+{
+	acx565akm_transfer(md, reg, buf, len, NULL, 0);
+}
+
+static inline void acx565akm_read(struct acx565akm_device *md,
+			      int reg, u8 *buf, int len)
+{
+	acx565akm_transfer(md, reg, NULL, 0, buf, len);
+}
+
+static void hw_guard_start(struct acx565akm_device *md, int guard_msec)
+{
+	md->hw_guard_wait = msecs_to_jiffies(guard_msec);
+	md->hw_guard_end = jiffies + md->hw_guard_wait;
+}
+
+static void hw_guard_wait(struct acx565akm_device *md)
+{
+	unsigned long wait = md->hw_guard_end - jiffies;
+
+	if ((long)wait > 0 && wait <= md->hw_guard_wait) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(wait);
+	}
+}
+
+/*----------------------MIPID wrappers----------------------------*/
+
+static void set_sleep_mode(struct acx565akm_device *md, int on)
+{
+	int cmd;
+
+	if (on)
+		cmd = MIPID_CMD_SLEEP_IN;
+	else
+		cmd = MIPID_CMD_SLEEP_OUT;
+	/*
+	 * We have to keep 120msec between sleep in/out commands.
+	 * (8.2.15, 8.2.16).
+	 */
+	hw_guard_wait(md);
+	acx565akm_cmd(md, cmd);
+	hw_guard_start(md, 120);
+}
+
+static void set_display_state(struct acx565akm_device *md, int enabled)
+{
+	int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;
+
+	acx565akm_cmd(md, cmd);
+}
+
+static int panel_enabled(struct acx565akm_device *md)
+{
+	u32 disp_status;
+	int enabled;
+
+	acx565akm_read(md, MIPID_CMD_READ_DISP_STATUS, (u8 *)&disp_status, 4);
+	disp_status = __be32_to_cpu(disp_status);
+	enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
+	dev_dbg(&md->spi->dev,
+		"LCD panel %senabled by bootloader (status 0x%04x)\n",
+		enabled ? "" : "not ", disp_status);
+	return enabled;
+}
+
+static int panel_detect(struct acx565akm_device *md)
+{
+	acx565akm_read(md, MIPID_CMD_READ_DISP_ID, md->display_id, 3);
+	dev_dbg(&md->spi->dev, "MIPI display ID: %02x%02x%02x\n",
+		md->display_id[0], md->display_id[1], md->display_id[2]);
+
+	switch (md->display_id[0]) {
+	case 0x10:
+		md->model = MIPID_VER_ACX565AKM;
+		md->name = "acx565akm";
+		md->has_bc = 1;
+		md->has_cabc = 1;
+		break;
+	case 0x29:
+		md->model = MIPID_VER_L4F00311;
+		md->name = "l4f00311";
+		break;
+	case 0x45:
+		md->model = MIPID_VER_LPH8923;
+		md->name = "lph8923";
+		break;
+	case 0x83:
+		md->model = MIPID_VER_LS041Y3;
+		md->name = "ls041y3";
+		break;
+	default:
+		md->name = "unknown";
+		dev_err(&md->spi->dev, "invalid display ID\n");
+		return -ENODEV;
+	}
+
+	md->revision = md->display_id[1];
+
+	dev_info(&md->spi->dev, "omapfb: %s rev %02x LCD detected\n",
+			md->name, md->revision);
+
+	return 0;
+}
+
+/*----------------------Backlight Control-------------------------*/
+
+static void enable_backlight_ctrl(struct acx565akm_device *md, int enable)
+{
+	u16 ctrl;
+
+	acx565akm_read(md, MIPID_CMD_READ_CTRL_DISP, (u8 *)&ctrl, 1);
+	if (enable) {
+		ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON |
+			CTRL_DISP_BACKLIGHT_ON;
+	} else {
+		ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON |
+			  CTRL_DISP_BACKLIGHT_ON);
+	}
+
+	ctrl |= 1 << 8;
+	acx565akm_write(md, MIPID_CMD_WRITE_CTRL_DISP, (u8 *)&ctrl, 2);
+}
+
+static void set_cabc_mode(struct acx565akm_device *md, unsigned mode)
+{
+	u16 cabc_ctrl;
+
+	md->cabc_mode = mode;
+	if (!md->enabled)
+		return;
+	cabc_ctrl = 0;
+	acx565akm_read(md, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1);
+	cabc_ctrl &= ~3;
+	cabc_ctrl |= (1 << 8) | (mode & 3);
+	acx565akm_write(md, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2);
+}
+
+static unsigned get_cabc_mode(struct acx565akm_device *md)
+{
+	return md->cabc_mode;
+}
+
+static unsigned get_hw_cabc_mode(struct acx565akm_device *md)
+{
+	u8 cabc_ctrl;
+
+	acx565akm_read(md, MIPID_CMD_READ_CABC, &cabc_ctrl, 1);
+	return cabc_ctrl & 3;
+}
+
+static void acx565akm_set_brightness(struct acx565akm_device *md, int level)
+{
+	int bv;
+
+	bv = level | (1 << 8);
+	acx565akm_write(md, MIPID_CMD_WRITE_DISP_BRIGHTNESS, (u8 *)&bv, 2);
+
+	if (level)
+		enable_backlight_ctrl(md, 1);
+	else
+		enable_backlight_ctrl(md, 0);
+}
+
+static int acx565akm_get_actual_brightness(struct acx565akm_device *md)
+{
+	u8 bv;
+
+	acx565akm_read(md, MIPID_CMD_READ_DISP_BRIGHTNESS, &bv, 1);
+
+	return bv;
+}
+
+
+static int acx565akm_bl_update_status(struct backlight_device *dev)
+{
+	struct acx565akm_device *md = dev_get_drvdata(&dev->dev);
+	int r;
+	int level;
+
+	dev_dbg(&md->spi->dev, "%s\n", __func__);
+
+	mutex_lock(&md->mutex);
+
+	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
+			dev->props.power == FB_BLANK_UNBLANK)
+		level = dev->props.brightness;
+	else
+		level = 0;
+
+	r = 0;
+	if (md->has_bc)
+		acx565akm_set_brightness(md, level);
+	else if (md->dssdev->set_backlight)
+		r = md->dssdev->set_backlight(md->dssdev, level);
+	else
+		r = -ENODEV;
+
+	mutex_unlock(&md->mutex);
+
+	return r;
+}
+
+static int acx565akm_bl_get_intensity(struct backlight_device *dev)
+{
+	struct acx565akm_device *md = dev_get_drvdata(&dev->dev);
+
+	dev_dbg(&dev->dev, "%s\n", __func__);
+
+	if (!md->has_bc && md->dssdev->set_backlight == NULL)
+		return -ENODEV;
+
+	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
+			dev->props.power == FB_BLANK_UNBLANK) {
+		if (md->has_bc)
+			return acx565akm_get_actual_brightness(md);
+		else
+			return dev->props.brightness;
+	}
+
+	return 0;
+}
+
+static const struct backlight_ops acx565akm_bl_ops = {
+	.get_brightness = acx565akm_bl_get_intensity,
+	.update_status  = acx565akm_bl_update_status,
+};
+
+/*--------------------Auto Brightness control via Sysfs---------------------*/
+
+static const char *cabc_modes[] = {
+	"off",		/* always used when CABC is not supported */
+	"ui",
+	"still-image",
+	"moving-image",
+};
+
+static ssize_t show_cabc_mode(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct acx565akm_device *md = dev_get_drvdata(dev);
+	const char *mode_str;
+	int mode;
+	int len;
+
+	if (!md->has_cabc)
+		mode = 0;
+	else
+		mode = get_cabc_mode(md);
+	mode_str = "unknown";
+	if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
+		mode_str = cabc_modes[mode];
+	len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
+
+	return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
+}
+
+static ssize_t store_cabc_mode(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct acx565akm_device *md = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
+		const char *mode_str = cabc_modes[i];
+		int cmp_len = strlen(mode_str);
+
+		if (count > 0 && buf[count - 1] == '\n')
+			count--;
+		if (count != cmp_len)
+			continue;
+
+		if (strncmp(buf, mode_str, cmp_len) == 0)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(cabc_modes))
+		return -EINVAL;
+
+	if (!md->has_cabc && i != 0)
+		return -EINVAL;
+
+	mutex_lock(&md->mutex);
+	set_cabc_mode(md, i);
+	mutex_unlock(&md->mutex);
+
+	return count;
+}
+
+static ssize_t show_cabc_available_modes(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct acx565akm_device *md = dev_get_drvdata(dev);
+	int len;
+	int i;
+
+	if (!md->has_cabc)
+		return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]);
+
+	for (i = 0, len = 0;
+	     len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
+		len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
+			i ? " " : "", cabc_modes[i],
+			i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
+
+	return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
+}
+
+static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
+		show_cabc_mode, store_cabc_mode);
+static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
+		show_cabc_available_modes, NULL);
+
+static struct attribute *bldev_attrs[] = {
+	&dev_attr_cabc_mode.attr,
+	&dev_attr_cabc_available_modes.attr,
+	NULL,
+};
+
+static struct attribute_group bldev_attr_group = {
+	.attrs = bldev_attrs,
+};
+
+
+/*---------------------------ACX Panel----------------------------*/
+
+static int acx_get_recommended_bpp(struct omap_dss_device *dssdev)
+{
+	return 16;
+}
+
+static struct omap_video_timings acx_panel_timings = {
+	.x_res		= 800,
+	.y_res		= 480,
+	.pixel_clock	= 24000,
+	.hfp		= 28,
+	.hsw		= 4,
+	.hbp		= 24,
+	.vfp		= 3,
+	.vsw		= 3,
+	.vbp		= 4,
+};
+
+static int acx_panel_probe(struct omap_dss_device *dssdev)
+{
+	int r;
+	struct acx565akm_device *md = &acx_dev;
+	struct backlight_device *bldev;
+	int max_brightness, brightness;
+	struct backlight_properties props;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+					OMAP_DSS_LCD_IHS;
+	/* FIXME AC bias ? */
+	dssdev->panel.timings = acx_panel_timings;
+
+	if (dssdev->platform_enable)
+		dssdev->platform_enable(dssdev);
+	/*
+	 * After reset we have to wait 5 msec before the first
+	 * command can be sent.
+	 */
+	msleep(5);
+
+	md->enabled = panel_enabled(md);
+
+	r = panel_detect(md);
+	if (r) {
+		dev_err(&dssdev->dev, "%s panel detect error\n", __func__);
+		if (!md->enabled && dssdev->platform_disable)
+			dssdev->platform_disable(dssdev);
+		return r;
+	}
+
+	mutex_lock(&acx_dev.mutex);
+	acx_dev.dssdev = dssdev;
+	mutex_unlock(&acx_dev.mutex);
+
+	if (!md->enabled) {
+		if (dssdev->platform_disable)
+			dssdev->platform_disable(dssdev);
+	}
+
+	/*------- Backlight control --------*/
+
+	props.fb_blank = FB_BLANK_UNBLANK;
+	props.power = FB_BLANK_UNBLANK;
+
+	bldev = backlight_device_register("acx565akm", &md->spi->dev,
+			md, &acx565akm_bl_ops, &props);
+	md->bl_dev = bldev;
+	if (md->has_cabc) {
+		r = sysfs_create_group(&bldev->dev.kobj, &bldev_attr_group);
+		if (r) {
+			dev_err(&bldev->dev,
+				"%s failed to create sysfs files\n", __func__);
+			backlight_device_unregister(bldev);
+			return r;
+		}
+		md->cabc_mode = get_hw_cabc_mode(md);
+	}
+
+	if (md->has_bc)
+		max_brightness = 255;
+	else
+		max_brightness = dssdev->max_backlight_level;
+
+	if (md->has_bc)
+		brightness = acx565akm_get_actual_brightness(md);
+	else if (dssdev->get_backlight)
+		brightness = dssdev->get_backlight(dssdev);
+	else
+		brightness = 0;
+
+	bldev->props.max_brightness = max_brightness;
+	bldev->props.brightness = brightness;
+
+	acx565akm_bl_update_status(bldev);
+	return 0;
+}
+
+static void acx_panel_remove(struct omap_dss_device *dssdev)
+{
+	struct acx565akm_device *md = &acx_dev;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	sysfs_remove_group(&md->bl_dev->dev.kobj, &bldev_attr_group);
+	backlight_device_unregister(md->bl_dev);
+	mutex_lock(&acx_dev.mutex);
+	acx_dev.dssdev = NULL;
+	mutex_unlock(&acx_dev.mutex);
+}
+
+static int acx_panel_power_on(struct omap_dss_device *dssdev)
+{
+	struct acx565akm_device *md = &acx_dev;
+	int r;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+
+	mutex_lock(&md->mutex);
+
+	r = omapdss_sdi_display_enable(dssdev);
+	if (r) {
+		pr_err("%s sdi enable failed\n", __func__);
+		return r;
+	}
+
+	/*FIXME tweak me */
+	msleep(50);
+
+	if (dssdev->platform_enable) {
+		r = dssdev->platform_enable(dssdev);
+		if (r)
+			goto fail;
+	}
+
+	if (md->enabled) {
+		dev_dbg(&md->spi->dev, "panel already enabled\n");
+		mutex_unlock(&md->mutex);
+		return 0;
+	}
+
+	/*
+	 * We have to meet all the following delay requirements:
+	 * 1. tRW: reset pulse width 10usec (7.12.1)
+	 * 2. tRT: reset cancel time 5msec (7.12.1)
+	 * 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst
+	 *    case (7.6.2)
+	 * 4. 120msec before the sleep out command (7.12.1)
+	 */
+	msleep(120);
+
+	set_sleep_mode(md, 0);
+	md->enabled = 1;
+
+	/* 5msec between sleep out and the next command. (8.2.16) */
+	msleep(5);
+	set_display_state(md, 1);
+	set_cabc_mode(md, md->cabc_mode);
+
+	mutex_unlock(&md->mutex);
+
+	return acx565akm_bl_update_status(md->bl_dev);
+fail:
+	omapdss_sdi_display_disable(dssdev);
+	return r;
+}
+
+static void acx_panel_power_off(struct omap_dss_device *dssdev)
+{
+	struct acx565akm_device *md = &acx_dev;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+
+	mutex_lock(&md->mutex);
+
+	if (!md->enabled) {
+		mutex_unlock(&md->mutex);
+		return;
+	}
+	set_display_state(md, 0);
+	set_sleep_mode(md, 1);
+	md->enabled = 0;
+	/*
+	 * We have to provide PCLK,HS,VS signals for 2 frames (worst case
+	 * ~50msec) after sending the sleep in command and asserting the
+	 * reset signal. We probably could assert the reset w/o the delay
+	 * but we still delay to avoid possible artifacts. (7.6.1)
+	 */
+	msleep(50);
+
+	if (dssdev->platform_disable)
+		dssdev->platform_disable(dssdev);
+
+	/* FIXME need to tweak this delay */
+	msleep(100);
+
+	omapdss_sdi_display_disable(dssdev);
+
+	mutex_unlock(&md->mutex);
+}
+
+static int acx_panel_enable(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	r = acx_panel_power_on(dssdev);
+
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+	return 0;
+}
+
+static void acx_panel_disable(struct omap_dss_device *dssdev)
+{
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	acx_panel_power_off(dssdev);
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static int acx_panel_suspend(struct omap_dss_device *dssdev)
+{
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	acx_panel_power_off(dssdev);
+	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+	return 0;
+}
+
+static int acx_panel_resume(struct omap_dss_device *dssdev)
+{
+	int r;
+
+	dev_dbg(&dssdev->dev, "%s\n", __func__);
+	r = acx_panel_power_on(dssdev);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+	return 0;
+}
+
+static void acx_panel_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	int r;
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+		omapdss_sdi_display_disable(dssdev);
+
+	dssdev->panel.timings = *timings;
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
+		r = omapdss_sdi_display_enable(dssdev);
+		if (r)
+			dev_err(&dssdev->dev, "%s enable failed\n", __func__);
+	}
+}
+
+static void acx_panel_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	*timings = dssdev->panel.timings;
+}
+
+static int acx_panel_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	return 0;
+}
+
+
+static struct omap_dss_driver acx_panel_driver = {
+	.probe		= acx_panel_probe,
+	.remove		= acx_panel_remove,
+
+	.enable		= acx_panel_enable,
+	.disable	= acx_panel_disable,
+	.suspend	= acx_panel_suspend,
+	.resume		= acx_panel_resume,
+
+	.set_timings	= acx_panel_set_timings,
+	.get_timings	= acx_panel_get_timings,
+	.check_timings	= acx_panel_check_timings,
+
+	.get_recommended_bpp = acx_get_recommended_bpp,
+
+	.driver         = {
+		.name   = "panel-acx565akm",
+		.owner  = THIS_MODULE,
+	},
+};
+
+/*--------------------SPI probe-------------------------*/
+
+static int acx565akm_spi_probe(struct spi_device *spi)
+{
+	struct acx565akm_device *md = &acx_dev;
+
+	dev_dbg(&spi->dev, "%s\n", __func__);
+
+	spi->mode = SPI_MODE_3;
+	md->spi = spi;
+	mutex_init(&md->mutex);
+	dev_set_drvdata(&spi->dev, md);
+
+	omap_dss_register_driver(&acx_panel_driver);
+
+	return 0;
+}
+
+static int acx565akm_spi_remove(struct spi_device *spi)
+{
+	struct acx565akm_device *md = dev_get_drvdata(&spi->dev);
+
+	dev_dbg(&md->spi->dev, "%s\n", __func__);
+	omap_dss_unregister_driver(&acx_panel_driver);
+
+	return 0;
+}
+
+static struct spi_driver acx565akm_spi_driver = {
+	.driver = {
+		.name	= "acx565akm",
+		.bus	= &spi_bus_type,
+		.owner	= THIS_MODULE,
+	},
+	.probe	= acx565akm_spi_probe,
+	.remove	= __devexit_p(acx565akm_spi_remove),
+};
+
+static int __init acx565akm_init(void)
+{
+	return spi_register_driver(&acx565akm_spi_driver);
+}
+
+static void __exit acx565akm_exit(void)
+{
+	spi_unregister_driver(&acx565akm_spi_driver);
+}
+
+module_init(acx565akm_init);
+module_exit(acx565akm_exit);
+
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("acx565akm LCD Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
index 8d51a5e6341..7d9eb2b1f5a 100644
--- a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
@@ -20,10 +20,17 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
 #include <linux/err.h>
+#include <linux/slab.h>
 
 #include <plat/display.h>
 
+struct sharp_data {
+	struct backlight_device *bl;
+};
+
 static struct omap_video_timings sharp_ls_timings = {
 	.x_res = 480,
 	.y_res = 640,
@@ -39,18 +46,89 @@ static struct omap_video_timings sharp_ls_timings = {
 	.vbp		= 1,
 };
 
+static int sharp_ls_bl_update_status(struct backlight_device *bl)
+{
+	struct omap_dss_device *dssdev = dev_get_drvdata(&bl->dev);
+	int level;
+
+	if (!dssdev->set_backlight)
+		return -EINVAL;
+
+	if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
+			bl->props.power == FB_BLANK_UNBLANK)
+		level = bl->props.brightness;
+	else
+		level = 0;
+
+	return dssdev->set_backlight(dssdev, level);
+}
+
+static int sharp_ls_bl_get_brightness(struct backlight_device *bl)
+{
+	if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
+			bl->props.power == FB_BLANK_UNBLANK)
+		return bl->props.brightness;
+
+	return 0;
+}
+
+static const struct backlight_ops sharp_ls_bl_ops = {
+	.get_brightness = sharp_ls_bl_get_brightness,
+	.update_status  = sharp_ls_bl_update_status,
+};
+
+
+
 static int sharp_ls_panel_probe(struct omap_dss_device *dssdev)
 {
+	struct backlight_properties props;
+	struct backlight_device *bl;
+	struct sharp_data *sd;
+	int r;
+
 	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
 		OMAP_DSS_LCD_IHS;
 	dssdev->panel.acb = 0x28;
 	dssdev->panel.timings = sharp_ls_timings;
 
+	sd = kzalloc(sizeof(*sd), GFP_KERNEL);
+	if (!sd)
+		return -ENOMEM;
+
+	dev_set_drvdata(&dssdev->dev, sd);
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = dssdev->max_backlight_level;
+
+	bl = backlight_device_register("sharp-ls", &dssdev->dev, dssdev,
+			&sharp_ls_bl_ops, &props);
+	if (IS_ERR(bl)) {
+		r = PTR_ERR(bl);
+		kfree(sd);
+		return r;
+	}
+	sd->bl = bl;
+
+	bl->props.fb_blank = FB_BLANK_UNBLANK;
+	bl->props.power = FB_BLANK_UNBLANK;
+	bl->props.brightness = dssdev->max_backlight_level;
+	r = sharp_ls_bl_update_status(bl);
+	if (r < 0)
+		dev_err(&dssdev->dev, "failed to set lcd brightness\n");
+
 	return 0;
 }
 
 static void sharp_ls_panel_remove(struct omap_dss_device *dssdev)
 {
+	struct sharp_data *sd = dev_get_drvdata(&dssdev->dev);
+	struct backlight_device *bl = sd->bl;
+
+	bl->props.power = FB_BLANK_POWERDOWN;
+	sharp_ls_bl_update_status(bl);
+	backlight_device_unregister(bl);
+
+	kfree(sd);
 }
 
 static int sharp_ls_power_on(struct omap_dss_device *dssdev)
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index 4f3988a4108..aaf5d308a04 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -31,6 +31,7 @@
 #include <linux/completion.h>
 #include <linux/workqueue.h>
 #include <linux/slab.h>
+#include <linux/mutex.h>
 
 #include <plat/display.h>
 
@@ -67,6 +68,8 @@
 static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable);
 
 struct taal_data {
+	struct mutex lock;
+
 	struct backlight_device *bldev;
 
 	unsigned long	hw_guard_end;	/* next value of jiffies when we can
@@ -510,6 +513,8 @@ static int taal_probe(struct omap_dss_device *dssdev)
 	}
 	td->dssdev = dssdev;
 
+	mutex_init(&td->lock);
+
 	td->esd_wq = create_singlethread_workqueue("taal_esd");
 	if (td->esd_wq == NULL) {
 		dev_err(&dssdev->dev, "can't create ESD workqueue\n");
@@ -697,10 +702,9 @@ static int taal_power_on(struct omap_dss_device *dssdev)
 
 	return 0;
 err:
-	dsi_bus_unlock();
-
 	omapdss_dsi_display_disable(dssdev);
 err0:
+	dsi_bus_unlock();
 	if (dssdev->platform_disable)
 		dssdev->platform_disable(dssdev);
 
@@ -733,54 +737,96 @@ static void taal_power_off(struct omap_dss_device *dssdev)
 
 static int taal_enable(struct omap_dss_device *dssdev)
 {
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
 	int r;
+
 	dev_dbg(&dssdev->dev, "enable\n");
 
-	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED)
-		return -EINVAL;
+	mutex_lock(&td->lock);
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) {
+		r = -EINVAL;
+		goto err;
+	}
 
 	r = taal_power_on(dssdev);
 	if (r)
-		return r;
+		goto err;
 
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 
+	mutex_unlock(&td->lock);
+
+	return 0;
+err:
+	dev_dbg(&dssdev->dev, "enable failed\n");
+	mutex_unlock(&td->lock);
 	return r;
 }
 
 static void taal_disable(struct omap_dss_device *dssdev)
 {
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
 	dev_dbg(&dssdev->dev, "disable\n");
 
+	mutex_lock(&td->lock);
+
 	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
 		taal_power_off(dssdev);
 
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+
+	mutex_unlock(&td->lock);
 }
 
 static int taal_suspend(struct omap_dss_device *dssdev)
 {
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+	int r;
+
 	dev_dbg(&dssdev->dev, "suspend\n");
 
-	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
-		return -EINVAL;
+	mutex_lock(&td->lock);
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
+		r = -EINVAL;
+		goto err;
+	}
 
 	taal_power_off(dssdev);
 	dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
 
+	mutex_unlock(&td->lock);
+
 	return 0;
+err:
+	mutex_unlock(&td->lock);
+	return r;
 }
 
 static int taal_resume(struct omap_dss_device *dssdev)
 {
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
 	int r;
+
 	dev_dbg(&dssdev->dev, "resume\n");
 
-	if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED)
-		return -EINVAL;
+	mutex_lock(&td->lock);
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) {
+		r = -EINVAL;
+		goto err;
+	}
 
 	r = taal_power_on(dssdev);
 	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	mutex_unlock(&td->lock);
+
+	return r;
+err:
+	mutex_unlock(&td->lock);
 	return r;
 }
 
@@ -799,6 +845,7 @@ static int taal_update(struct omap_dss_device *dssdev,
 
 	dev_dbg(&dssdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
 
+	mutex_lock(&td->lock);
 	dsi_bus_lock();
 
 	if (!td->enabled) {
@@ -820,18 +867,24 @@ static int taal_update(struct omap_dss_device *dssdev,
 		goto err;
 
 	/* note: no bus_unlock here. unlock is in framedone_cb */
+	mutex_unlock(&td->lock);
 	return 0;
 err:
 	dsi_bus_unlock();
+	mutex_unlock(&td->lock);
 	return r;
 }
 
 static int taal_sync(struct omap_dss_device *dssdev)
 {
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+
 	dev_dbg(&dssdev->dev, "sync\n");
 
+	mutex_lock(&td->lock);
 	dsi_bus_lock();
 	dsi_bus_unlock();
+	mutex_unlock(&td->lock);
 
 	dev_dbg(&dssdev->dev, "sync done\n");
 
@@ -861,13 +914,16 @@ static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable)
 
 static int taal_enable_te(struct omap_dss_device *dssdev, bool enable)
 {
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
 	int r;
 
+	mutex_lock(&td->lock);
 	dsi_bus_lock();
 
 	r = _taal_enable_te(dssdev, enable);
 
 	dsi_bus_unlock();
+	mutex_unlock(&td->lock);
 
 	return r;
 }
@@ -875,7 +931,13 @@ static int taal_enable_te(struct omap_dss_device *dssdev, bool enable)
 static int taal_get_te(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	return td->te_enabled;
+	int r;
+
+	mutex_lock(&td->lock);
+	r = td->te_enabled;
+	mutex_unlock(&td->lock);
+
+	return r;
 }
 
 static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
@@ -885,6 +947,7 @@ static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
 
 	dev_dbg(&dssdev->dev, "rotate %d\n", rotate);
 
+	mutex_lock(&td->lock);
 	dsi_bus_lock();
 
 	if (td->enabled) {
@@ -896,16 +959,24 @@ static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
 	td->rotate = rotate;
 
 	dsi_bus_unlock();
+	mutex_unlock(&td->lock);
 	return 0;
 err:
 	dsi_bus_unlock();
+	mutex_unlock(&td->lock);
 	return r;
 }
 
 static u8 taal_get_rotate(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	return td->rotate;
+	int r;
+
+	mutex_lock(&td->lock);
+	r = td->rotate;
+	mutex_unlock(&td->lock);
+
+	return r;
 }
 
 static int taal_mirror(struct omap_dss_device *dssdev, bool enable)
@@ -915,6 +986,7 @@ static int taal_mirror(struct omap_dss_device *dssdev, bool enable)
 
 	dev_dbg(&dssdev->dev, "mirror %d\n", enable);
 
+	mutex_lock(&td->lock);
 	dsi_bus_lock();
 	if (td->enabled) {
 		r = taal_set_addr_mode(td->rotate, enable);
@@ -925,23 +997,33 @@ static int taal_mirror(struct omap_dss_device *dssdev, bool enable)
 	td->mirror = enable;
 
 	dsi_bus_unlock();
+	mutex_unlock(&td->lock);
 	return 0;
 err:
 	dsi_bus_unlock();
+	mutex_unlock(&td->lock);
 	return r;
 }
 
 static bool taal_get_mirror(struct omap_dss_device *dssdev)
 {
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-	return td->mirror;
+	int r;
+
+	mutex_lock(&td->lock);
+	r = td->mirror;
+	mutex_unlock(&td->lock);
+
+	return r;
 }
 
 static int taal_run_test(struct omap_dss_device *dssdev, int test_num)
 {
+	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
 	u8 id1, id2, id3;
 	int r;
 
+	mutex_lock(&td->lock);
 	dsi_bus_lock();
 
 	r = taal_dcs_read_1(DCS_GET_ID1, &id1);
@@ -955,9 +1037,11 @@ static int taal_run_test(struct omap_dss_device *dssdev, int test_num)
 		goto err;
 
 	dsi_bus_unlock();
+	mutex_unlock(&td->lock);
 	return 0;
 err:
 	dsi_bus_unlock();
+	mutex_unlock(&td->lock);
 	return r;
 }
 
@@ -971,12 +1055,16 @@ static int taal_memory_read(struct omap_dss_device *dssdev,
 	unsigned buf_used = 0;
 	struct taal_data *td = dev_get_drvdata(&dssdev->dev);
 
-	if (!td->enabled)
-		return -ENODEV;
-
 	if (size < w * h * 3)
 		return -ENOMEM;
 
+	mutex_lock(&td->lock);
+
+	if (!td->enabled) {
+		r = -ENODEV;
+		goto err1;
+	}
+
 	size = min(w * h * 3,
 			dssdev->panel.timings.x_res *
 			dssdev->panel.timings.y_res * 3);
@@ -995,7 +1083,7 @@ static int taal_memory_read(struct omap_dss_device *dssdev,
 
 	r = dsi_vc_set_max_rx_packet_size(TCH, plen);
 	if (r)
-		goto err0;
+		goto err2;
 
 	while (buf_used < size) {
 		u8 dcs_cmd = first ? 0x2e : 0x3e;
@@ -1006,7 +1094,7 @@ static int taal_memory_read(struct omap_dss_device *dssdev,
 
 		if (r < 0) {
 			dev_err(&dssdev->dev, "read error\n");
-			goto err;
+			goto err3;
 		}
 
 		buf_used += r;
@@ -1020,16 +1108,18 @@ static int taal_memory_read(struct omap_dss_device *dssdev,
 			dev_err(&dssdev->dev, "signal pending, "
 					"aborting memory read\n");
 			r = -ERESTARTSYS;
-			goto err;
+			goto err3;
 		}
 	}
 
 	r = buf_used;
 
-err:
+err3:
 	dsi_vc_set_max_rx_packet_size(TCH, 1);
-err0:
+err2:
 	dsi_bus_unlock();
+err1:
+	mutex_unlock(&td->lock);
 	return r;
 }
 
@@ -1041,8 +1131,12 @@ static void taal_esd_work(struct work_struct *work)
 	u8 state1, state2;
 	int r;
 
-	if (!td->enabled)
+	mutex_lock(&td->lock);
+
+	if (!td->enabled) {
+		mutex_unlock(&td->lock);
 		return;
+	}
 
 	dsi_bus_lock();
 
@@ -1084,16 +1178,19 @@ static void taal_esd_work(struct work_struct *work)
 
 	queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD);
 
+	mutex_unlock(&td->lock);
 	return;
 err:
 	dev_err(&dssdev->dev, "performing LCD reset\n");
 
-	taal_disable(dssdev);
-	taal_enable(dssdev);
+	taal_power_off(dssdev);
+	taal_power_on(dssdev);
 
 	dsi_bus_unlock();
 
 	queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD);
+
+	mutex_unlock(&td->lock);
 }
 
 static int taal_set_update_mode(struct omap_dss_device *dssdev,
diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig
index 87afb81b2c4..43b64403eaa 100644
--- a/drivers/video/omap2/dss/Kconfig
+++ b/drivers/video/omap2/dss/Kconfig
@@ -36,6 +36,12 @@ config OMAP2_DSS_COLLECT_IRQ_STATS
 	  <debugfs>/omapdss/dispc_irq for DISPC interrupts, and
 	  <debugfs>/omapdss/dsi_irq for DSI interrupts.
 
+config OMAP2_DSS_DPI
+	bool "DPI support"
+	default y
+	help
+	  DPI Interface. This is the Parallel Display Interface.
+
 config OMAP2_DSS_RFBI
 	bool "RFBI support"
         default n
diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile
index 980c72c2db9..d71b5d9d71b 100644
--- a/drivers/video/omap2/dss/Makefile
+++ b/drivers/video/omap2/dss/Makefile
@@ -1,5 +1,6 @@
 obj-$(CONFIG_OMAP2_DSS) += omapdss.o
-omapdss-y := core.o dss.o dispc.o dpi.o display.o manager.o overlay.o
+omapdss-y := core.o dss.o dispc.o display.o manager.o overlay.o
+omapdss-$(CONFIG_OMAP2_DSS_DPI) += dpi.o
 omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o
 omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o
 omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
index 7ebe50b335e..b3a498f22d3 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/omap2/dss/core.c
@@ -482,6 +482,14 @@ static void dss_uninitialize_debugfs(void)
 	if (dss_debugfs_dir)
 		debugfs_remove_recursive(dss_debugfs_dir);
 }
+#else /* CONFIG_DEBUG_FS && CONFIG_OMAP2_DSS_DEBUG_SUPPORT */
+static inline int dss_initialize_debugfs(void)
+{
+	return 0;
+}
+static inline void dss_uninitialize_debugfs(void)
+{
+}
 #endif /* CONFIG_DEBUG_FS && CONFIG_OMAP2_DSS_DEBUG_SUPPORT */
 
 /* PLATFORM DEVICE */
@@ -499,7 +507,7 @@ static int omap_dss_probe(struct platform_device *pdev)
 
 	r = dss_get_clocks();
 	if (r)
-		goto fail0;
+		goto err_clocks;
 
 	dss_clk_enable_all_no_ctx();
 
@@ -515,64 +523,64 @@ static int omap_dss_probe(struct platform_device *pdev)
 	r = dss_init(skip_init);
 	if (r) {
 		DSSERR("Failed to initialize DSS\n");
-		goto fail0;
+		goto err_dss;
 	}
 
-#ifdef CONFIG_OMAP2_DSS_RFBI
 	r = rfbi_init();
 	if (r) {
 		DSSERR("Failed to initialize rfbi\n");
-		goto fail0;
+		goto err_rfbi;
 	}
-#endif
 
 	r = dpi_init(pdev);
 	if (r) {
 		DSSERR("Failed to initialize dpi\n");
-		goto fail0;
+		goto err_dpi;
 	}
 
 	r = dispc_init();
 	if (r) {
 		DSSERR("Failed to initialize dispc\n");
-		goto fail0;
+		goto err_dispc;
 	}
-#ifdef CONFIG_OMAP2_DSS_VENC
+
 	r = venc_init(pdev);
 	if (r) {
 		DSSERR("Failed to initialize venc\n");
-		goto fail0;
+		goto err_venc;
 	}
-#endif
+
 	if (cpu_is_omap34xx()) {
-#ifdef CONFIG_OMAP2_DSS_SDI
 		r = sdi_init(skip_init);
 		if (r) {
 			DSSERR("Failed to initialize SDI\n");
-			goto fail0;
+			goto err_sdi;
 		}
-#endif
-#ifdef CONFIG_OMAP2_DSS_DSI
+
 		r = dsi_init(pdev);
 		if (r) {
 			DSSERR("Failed to initialize DSI\n");
-			goto fail0;
+			goto err_dsi;
 		}
-#endif
 	}
 
-#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
 	r = dss_initialize_debugfs();
 	if (r)
-		goto fail0;
-#endif
+		goto err_debugfs;
 
 	for (i = 0; i < pdata->num_devices; ++i) {
 		struct omap_dss_device *dssdev = pdata->devices[i];
 
 		r = omap_dss_register_device(dssdev);
-		if (r)
-			DSSERR("device reg failed %d\n", i);
+		if (r) {
+			DSSERR("device %d %s register failed %d\n", i,
+				dssdev->name ?: "unnamed", r);
+
+			while (--i >= 0)
+				omap_dss_unregister_device(pdata->devices[i]);
+
+			goto err_register;
+		}
 
 		if (def_disp_name && strcmp(def_disp_name, dssdev->name) == 0)
 			pdata->default_device = dssdev;
@@ -582,8 +590,29 @@ static int omap_dss_probe(struct platform_device *pdev)
 
 	return 0;
 
-	/* XXX fail correctly */
-fail0:
+err_register:
+	dss_uninitialize_debugfs();
+err_debugfs:
+	if (cpu_is_omap34xx())
+		dsi_exit();
+err_dsi:
+	if (cpu_is_omap34xx())
+		sdi_exit();
+err_sdi:
+	venc_exit();
+err_venc:
+	dispc_exit();
+err_dispc:
+	dpi_exit();
+err_dpi:
+	rfbi_exit();
+err_rfbi:
+	dss_exit();
+err_dss:
+	dss_clk_disable_all_no_ctx();
+	dss_put_clocks();
+err_clocks:
+
 	return r;
 }
 
@@ -593,25 +622,15 @@ static int omap_dss_remove(struct platform_device *pdev)
 	int i;
 	int c;
 
-#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
 	dss_uninitialize_debugfs();
-#endif
 
-#ifdef CONFIG_OMAP2_DSS_VENC
 	venc_exit();
-#endif
 	dispc_exit();
 	dpi_exit();
-#ifdef CONFIG_OMAP2_DSS_RFBI
 	rfbi_exit();
-#endif
 	if (cpu_is_omap34xx()) {
-#ifdef CONFIG_OMAP2_DSS_DSI
 		dsi_exit();
-#endif
-#ifdef CONFIG_OMAP2_DSS_SDI
 		sdi_exit();
-#endif
 	}
 
 	dss_exit();
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index 6a74ea116d2..ef8c8529dda 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -392,7 +392,9 @@ void dss_init_device(struct platform_device *pdev,
 	int r;
 
 	switch (dssdev->type) {
+#ifdef CONFIG_OMAP2_DSS_DPI
 	case OMAP_DISPLAY_TYPE_DPI:
+#endif
 #ifdef CONFIG_OMAP2_DSS_RFBI
 	case OMAP_DISPLAY_TYPE_DBI:
 #endif
@@ -413,9 +415,11 @@ void dss_init_device(struct platform_device *pdev,
 	}
 
 	switch (dssdev->type) {
+#ifdef CONFIG_OMAP2_DSS_DPI
 	case OMAP_DISPLAY_TYPE_DPI:
 		r = dpi_init_display(dssdev);
 		break;
+#endif
 #ifdef CONFIG_OMAP2_DSS_RFBI
 	case OMAP_DISPLAY_TYPE_DBI:
 		r = rfbi_init_display(dssdev);
@@ -541,7 +545,10 @@ int dss_resume_all_devices(void)
 static int dss_disable_device(struct device *dev, void *data)
 {
 	struct omap_dss_device *dssdev = to_dss_device(dev);
-	dssdev->driver->disable(dssdev);
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED)
+		dssdev->driver->disable(dssdev);
+
 	return 0;
 }
 
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 54344184dd7..24b18258654 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -223,7 +223,13 @@ void dss_dump_clocks(struct seq_file *s)
 
 	seq_printf(s, "dpll4_ck %lu\n", dpll4_ck_rate);
 
-	seq_printf(s, "dss1_alwon_fclk = %lu / %lu * 2 = %lu\n",
+	if (cpu_is_omap3630())
+		seq_printf(s, "dss1_alwon_fclk = %lu / %lu  = %lu\n",
+			dpll4_ck_rate,
+			dpll4_ck_rate / dpll4_m4_ck_rate,
+			dss_clk_get_rate(DSS_CLK_FCK1));
+	else
+		seq_printf(s, "dss1_alwon_fclk = %lu / %lu * 2 = %lu\n",
 			dpll4_ck_rate,
 			dpll4_ck_rate / dpll4_m4_ck_rate,
 			dss_clk_get_rate(DSS_CLK_FCK1));
@@ -293,7 +299,8 @@ int dss_calc_clock_rates(struct dss_clock_info *cinfo)
 {
 	unsigned long prate;
 
-	if (cinfo->fck_div > 16 || cinfo->fck_div == 0)
+	if (cinfo->fck_div > (cpu_is_omap3630() ? 32 : 16) ||
+						cinfo->fck_div == 0)
 		return -EINVAL;
 
 	prate = clk_get_rate(clk_get_parent(dss.dpll4_m4_ck));
@@ -329,7 +336,10 @@ int dss_get_clock_div(struct dss_clock_info *cinfo)
 	if (cpu_is_omap34xx()) {
 		unsigned long prate;
 		prate = clk_get_rate(clk_get_parent(dss.dpll4_m4_ck));
-		cinfo->fck_div = prate / (cinfo->fck / 2);
+		if (cpu_is_omap3630())
+			cinfo->fck_div = prate / (cinfo->fck);
+		else
+			cinfo->fck_div = prate / (cinfo->fck / 2);
 	} else {
 		cinfo->fck_div = 0;
 	}
@@ -402,10 +412,14 @@ retry:
 
 		goto found;
 	} else if (cpu_is_omap34xx()) {
-		for (fck_div = 16; fck_div > 0; --fck_div) {
+		for (fck_div = (cpu_is_omap3630() ? 32 : 16);
+					fck_div > 0; --fck_div) {
 			struct dispc_clock_info cur_dispc;
 
-			fck = prate / fck_div * 2;
+			if (cpu_is_omap3630())
+				fck = prate / fck_div;
+			else
+				fck = prate / fck_div * 2;
 
 			if (fck > DISPC_MAX_FCK)
 				continue;
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 24326a5fd29..786f433fd57 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -242,11 +242,22 @@ int dss_calc_clock_div(bool is_tft, unsigned long req_pck,
 		struct dispc_clock_info *dispc_cinfo);
 
 /* SDI */
+#ifdef CONFIG_OMAP2_DSS_SDI
 int sdi_init(bool skip_init);
 void sdi_exit(void);
 int sdi_init_display(struct omap_dss_device *display);
+#else
+static inline int sdi_init(bool skip_init)
+{
+	return 0;
+}
+static inline void sdi_exit(void)
+{
+}
+#endif
 
 /* DSI */
+#ifdef CONFIG_OMAP2_DSS_DSI
 int dsi_init(struct platform_device *pdev);
 void dsi_exit(void);
 
@@ -270,11 +281,30 @@ void dsi_pll_uninit(void);
 void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
 		u32 fifo_size, enum omap_burst_size *burst_size,
 		u32 *fifo_low, u32 *fifo_high);
+#else
+static inline int dsi_init(struct platform_device *pdev)
+{
+	return 0;
+}
+static inline void dsi_exit(void)
+{
+}
+#endif
 
 /* DPI */
+#ifdef CONFIG_OMAP2_DSS_DPI
 int dpi_init(struct platform_device *pdev);
 void dpi_exit(void);
 int dpi_init_display(struct omap_dss_device *dssdev);
+#else
+static inline int dpi_init(struct platform_device *pdev)
+{
+	return 0;
+}
+static inline void dpi_exit(void)
+{
+}
+#endif
 
 /* DISPC */
 int dispc_init(void);
@@ -362,12 +392,23 @@ int dispc_get_clock_div(struct dispc_clock_info *cinfo);
 
 
 /* VENC */
+#ifdef CONFIG_OMAP2_DSS_VENC
 int venc_init(struct platform_device *pdev);
 void venc_exit(void);
 void venc_dump_regs(struct seq_file *s);
 int venc_init_display(struct omap_dss_device *display);
+#else
+static inline int venc_init(struct platform_device *pdev)
+{
+	return 0;
+}
+static inline void venc_exit(void)
+{
+}
+#endif
 
 /* RFBI */
+#ifdef CONFIG_OMAP2_DSS_RFBI
 int rfbi_init(void);
 void rfbi_exit(void);
 void rfbi_dump_regs(struct seq_file *s);
@@ -379,6 +420,15 @@ void rfbi_transfer_area(u16 width, u16 height,
 void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t);
 unsigned long rfbi_get_max_tx_rate(void);
 int rfbi_init_display(struct omap_dss_device *display);
+#else
+static inline int rfbi_init(void)
+{
+	return 0;
+}
+static inline void rfbi_exit(void)
+{
+}
+#endif
 
 
 #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 0820986d4a6..9e1fbe531bf 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -843,6 +843,7 @@ static void configure_manager(enum omap_channel channel)
 
 	c = &dss_cache.manager_cache[channel];
 
+	dispc_set_default_color(channel, c->default_color);
 	dispc_set_trans_key(channel, c->trans_key_type, c->trans_key);
 	dispc_enable_trans_key(channel, c->trans_enabled);
 	dispc_enable_alpha_blending(channel, c->alpha_enabled);
@@ -940,6 +941,22 @@ static int configure_dispc(void)
 	return r;
 }
 
+/* Make the coordinates even. There are some strange problems with OMAP and
+ * partial DSI update when the update widths are odd. */
+static void make_even(u16 *x, u16 *w)
+{
+	u16 x1, x2;
+
+	x1 = *x;
+	x2 = *x + *w;
+
+	x1 &= ~1;
+	x2 = ALIGN(x2, 2);
+
+	*x = x1;
+	*w = x2 - x1;
+}
+
 /* Configure dispc for partial update. Return possibly modified update
  * area */
 void dss_setup_partial_planes(struct omap_dss_device *dssdev,
@@ -968,6 +985,8 @@ void dss_setup_partial_planes(struct omap_dss_device *dssdev,
 		return;
 	}
 
+	make_even(&x, &w);
+
 	spin_lock_irqsave(&dss_cache.lock, flags);
 
 	/* We need to show the whole overlay if it is scaled. So look for
@@ -1029,6 +1048,8 @@ void dss_setup_partial_planes(struct omap_dss_device *dssdev,
 		w = x2 - x1;
 		h = y2 - y1;
 
+		make_even(&x, &w);
+
 		DSSDBG("changing upd area due to ovl(%d) scaling %d,%d %dx%d\n",
 				i, x, y, w, h);
 	}
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 12eb4042dd8..ee07a3cc22e 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -23,13 +23,16 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/err.h>
+#include <linux/regulator/consumer.h>
 
 #include <plat/display.h>
+#include <plat/cpu.h>
 #include "dss.h"
 
 static struct {
 	bool skip_init;
 	bool update_enabled;
+	struct regulator *vdds_sdi_reg;
 } sdi;
 
 static void sdi_basic_init(void)
@@ -57,6 +60,10 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 		goto err0;
 	}
 
+	r = regulator_enable(sdi.vdds_sdi_reg);
+	if (r)
+		goto err1;
+
 	/* In case of skip_init sdi_init has already enabled the clocks */
 	if (!sdi.skip_init)
 		dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
@@ -115,19 +122,12 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
 
 	dssdev->manager->enable(dssdev->manager);
 
-	if (dssdev->driver->enable) {
-		r = dssdev->driver->enable(dssdev);
-		if (r)
-			goto err3;
-	}
-
 	sdi.skip_init = 0;
 
 	return 0;
-err3:
-	dssdev->manager->disable(dssdev->manager);
 err2:
 	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
+	regulator_disable(sdi.vdds_sdi_reg);
 err1:
 	omap_dss_stop_device(dssdev);
 err0:
@@ -137,15 +137,14 @@ EXPORT_SYMBOL(omapdss_sdi_display_enable);
 
 void omapdss_sdi_display_disable(struct omap_dss_device *dssdev)
 {
-	if (dssdev->driver->disable)
-		dssdev->driver->disable(dssdev);
-
 	dssdev->manager->disable(dssdev->manager);
 
 	dss_sdi_disable();
 
 	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
 
+	regulator_disable(sdi.vdds_sdi_reg);
+
 	omap_dss_stop_device(dssdev);
 }
 EXPORT_SYMBOL(omapdss_sdi_display_disable);
@@ -162,6 +161,11 @@ int sdi_init(bool skip_init)
 	/* we store this for first display enable, then clear it */
 	sdi.skip_init = skip_init;
 
+	sdi.vdds_sdi_reg = dss_get_vdds_sdi();
+	if (IS_ERR(sdi.vdds_sdi_reg)) {
+		DSSERR("can't get VDDS_SDI regulator\n");
+		return PTR_ERR(sdi.vdds_sdi_reg);
+	}
 	/*
 	 * Enable clocks already here, otherwise there would be a toggle
 	 * of them until sdi_display_enable is called.
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index f0ba5732d84..eff35050e28 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -479,12 +479,6 @@ static int venc_panel_enable(struct omap_dss_device *dssdev)
 		goto err1;
 	}
 
-	if (dssdev->platform_enable) {
-		r = dssdev->platform_enable(dssdev);
-		if (r)
-			goto err2;
-	}
-
 	venc_power_on(dssdev);
 
 	venc.wss_data = 0;
@@ -494,13 +488,9 @@ static int venc_panel_enable(struct omap_dss_device *dssdev)
 	/* wait couple of vsyncs until enabling the LCD */
 	msleep(50);
 
-	mutex_unlock(&venc.venc_lock);
-
-	return r;
-err2:
-	venc_power_off(dssdev);
 err1:
 	mutex_unlock(&venc.venc_lock);
+
 	return r;
 }
 
@@ -524,9 +514,6 @@ static void venc_panel_disable(struct omap_dss_device *dssdev)
 	/* wait at least 5 vsyncs after disabling the LCD */
 	msleep(100);
 
-	if (dssdev->platform_disable)
-		dssdev->platform_disable(dssdev);
-
 	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 end:
 	mutex_unlock(&venc.venc_lock);
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 1ffa760b854..9c7361871d7 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -183,13 +183,14 @@ int omapfb_update_window(struct fb_info *fbi,
 	struct omapfb2_device *fbdev = ofbi->fbdev;
 	int r;
 
+	if (!lock_fb_info(fbi))
+		return -ENODEV;
 	omapfb_lock(fbdev);
-	lock_fb_info(fbi);
 
 	r = omapfb_update_window_nolock(fbi, x, y, w, h);
 
-	unlock_fb_info(fbi);
 	omapfb_unlock(fbdev);
+	unlock_fb_info(fbi);
 
 	return r;
 }
diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c
index 62bb88f5c19..5179219128b 100644
--- a/drivers/video/omap2/omapfb/omapfb-sysfs.c
+++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c
@@ -57,7 +57,8 @@ static ssize_t store_rotate_type(struct device *dev,
 	if (rot_type != OMAP_DSS_ROT_DMA && rot_type != OMAP_DSS_ROT_VRFB)
 		return -EINVAL;
 
-	lock_fb_info(fbi);
+	if (!lock_fb_info(fbi))
+		return -ENODEV;
 
 	r = 0;
 	if (rot_type == ofbi->rotation_type)
@@ -105,7 +106,8 @@ static ssize_t store_mirror(struct device *dev,
 	if (mirror != 0 && mirror != 1)
 		return -EINVAL;
 
-	lock_fb_info(fbi);
+	if (!lock_fb_info(fbi))
+		return -ENODEV;
 
 	ofbi->mirror = mirror;
 
@@ -137,8 +139,9 @@ static ssize_t show_overlays(struct device *dev,
 	ssize_t l = 0;
 	int t;
 
+	if (!lock_fb_info(fbi))
+		return -ENODEV;
 	omapfb_lock(fbdev);
-	lock_fb_info(fbi);
 
 	for (t = 0; t < ofbi->num_overlays; t++) {
 		struct omap_overlay *ovl = ofbi->overlays[t];
@@ -154,8 +157,8 @@ static ssize_t show_overlays(struct device *dev,
 
 	l += snprintf(buf + l, PAGE_SIZE - l, "\n");
 
-	unlock_fb_info(fbi);
 	omapfb_unlock(fbdev);
+	unlock_fb_info(fbi);
 
 	return l;
 }
@@ -195,8 +198,9 @@ static ssize_t store_overlays(struct device *dev, struct device_attribute *attr,
 	if (buf[len - 1] == '\n')
 		len = len - 1;
 
+	if (!lock_fb_info(fbi))
+		return -ENODEV;
 	omapfb_lock(fbdev);
-	lock_fb_info(fbi);
 
 	if (len > 0) {
 		char *p = (char *)buf;
@@ -303,8 +307,8 @@ static ssize_t store_overlays(struct device *dev, struct device_attribute *attr,
 
 	r = count;
 out:
-	unlock_fb_info(fbi);
 	omapfb_unlock(fbdev);
+	unlock_fb_info(fbi);
 
 	return r;
 }
@@ -317,7 +321,8 @@ static ssize_t show_overlays_rotate(struct device *dev,
 	ssize_t l = 0;
 	int t;
 
-	lock_fb_info(fbi);
+	if (!lock_fb_info(fbi))
+		return -ENODEV;
 
 	for (t = 0; t < ofbi->num_overlays; t++) {
 		l += snprintf(buf + l, PAGE_SIZE - l, "%s%d",
@@ -345,7 +350,8 @@ static ssize_t store_overlays_rotate(struct device *dev,
 	if (buf[len - 1] == '\n')
 		len = len - 1;
 
-	lock_fb_info(fbi);
+	if (!lock_fb_info(fbi))
+		return -ENODEV;
 
 	if (len > 0) {
 		char *p = (char *)buf;
@@ -416,7 +422,8 @@ static ssize_t store_size(struct device *dev, struct device_attribute *attr,
 
 	size = PAGE_ALIGN(simple_strtoul(buf, NULL, 0));
 
-	lock_fb_info(fbi);
+	if (!lock_fb_info(fbi))
+		return -ENODEV;
 
 	for (i = 0; i < ofbi->num_overlays; i++) {
 		if (ofbi->overlays[i]->info.enabled) {
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index e14bd074912..e8c76994481 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -695,6 +695,7 @@ static int sh_mobile_lcdc_setup_clocks(struct platform_device *pdev,
 	 * 1) Enable Runtime PM
 	 * 2) Force Runtime PM Resume since hardware is accessed from probe()
 	 */
+	priv->dev = &pdev->dev;
 	pm_runtime_enable(priv->dev);
 	pm_runtime_resume(priv->dev);
 	return 0;
@@ -957,25 +958,24 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 
 	if (!pdev->dev.platform_data) {
 		dev_err(&pdev->dev, "no platform data defined\n");
-		error = -EINVAL;
-		goto err0;
+		return -EINVAL;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	i = platform_get_irq(pdev, 0);
 	if (!res || i < 0) {
 		dev_err(&pdev->dev, "cannot get platform resources\n");
-		error = -ENOENT;
-		goto err0;
+		return -ENOENT;
 	}
 
 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv) {
 		dev_err(&pdev->dev, "cannot allocate device data\n");
-		error = -ENOMEM;
-		goto err0;
+		return -ENOMEM;
 	}
 
+	platform_set_drvdata(pdev, priv);
+
 	error = request_irq(i, sh_mobile_lcdc_irq, IRQF_DISABLED,
 			    dev_name(&pdev->dev), priv);
 	if (error) {
@@ -984,8 +984,6 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 	}
 
 	priv->irq = i;
-	priv->dev = &pdev->dev;
-	platform_set_drvdata(pdev, priv);
 	pdata = pdev->dev.platform_data;
 
 	j = 0;
@@ -1099,9 +1097,9 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 		info = ch->info;
 
 		if (info->fbdefio) {
-			priv->ch->sglist = vmalloc(sizeof(struct scatterlist) *
+			ch->sglist = vmalloc(sizeof(struct scatterlist) *
 					info->fix.smem_len >> PAGE_SHIFT);
-			if (!priv->ch->sglist) {
+			if (!ch->sglist) {
 				dev_err(&pdev->dev, "cannot allocate sglist\n");
 				goto err1;
 			}
@@ -1126,9 +1124,9 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 	}
 
 	return 0;
- err1:
+err1:
 	sh_mobile_lcdc_remove(pdev);
- err0:
+
 	return error;
 }
 
@@ -1139,7 +1137,7 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(priv->ch); i++)
-		if (priv->ch[i].info->dev)
+		if (priv->ch[i].info && priv->ch[i].info->dev)
 			unregister_framebuffer(priv->ch[i].info);
 
 	sh_mobile_lcdc_stop(priv);
@@ -1162,7 +1160,8 @@ static int sh_mobile_lcdc_remove(struct platform_device *pdev)
 	if (priv->dot_clk)
 		clk_put(priv->dot_clk);
 
-	pm_runtime_disable(priv->dev);
+	if (priv->dev)
+		pm_runtime_disable(priv->dev);
 
 	if (priv->base)
 		iounmap(priv->base);
diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c
index 0cadf7aee27..090aa1a9be6 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/vesafb.c
@@ -177,7 +177,7 @@ static void vesafb_destroy(struct fb_info *info)
 {
 	if (info->screen_base)
 		iounmap(info->screen_base);
-	release_mem_region(info->aperture_base, info->aperture_size);
+	release_mem_region(info->apertures->ranges[0].base, info->apertures->ranges[0].size);
 	framebuffer_release(info);
 }
 
@@ -295,8 +295,13 @@ static int __init vesafb_probe(struct platform_device *dev)
 	info->par = NULL;
 
 	/* set vesafb aperture size for generic probing */
-	info->aperture_base = screen_info.lfb_base;
-	info->aperture_size = size_total;
+	info->apertures = alloc_apertures(1);
+	if (!info->apertures) {
+		err = -ENOMEM;
+		goto err;
+	}
+	info->apertures->ranges[0].base = screen_info.lfb_base;
+	info->apertures->ranges[0].size = size_total;
 
 	info->screen_base = ioremap(vesafb_fix.smem_start, vesafb_fix.smem_len);
 	if (!info->screen_base) {
diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c
index bf638a47a5b..149c47ac7e9 100644
--- a/drivers/video/vga16fb.c
+++ b/drivers/video/vga16fb.c
@@ -1263,10 +1263,19 @@ static void vga16fb_imageblit(struct fb_info *info, const struct fb_image *image
 		vga_imageblit_color(info, image);
 }
 
+static void vga16fb_destroy(struct fb_info *info)
+{
+	iounmap(info->screen_base);
+	fb_dealloc_cmap(&info->cmap);
+	/* XXX unshare VGA regions */
+	framebuffer_release(info);
+}
+
 static struct fb_ops vga16fb_ops = {
 	.owner		= THIS_MODULE,
 	.fb_open        = vga16fb_open,
 	.fb_release     = vga16fb_release,
+	.fb_destroy	= vga16fb_destroy,
 	.fb_check_var	= vga16fb_check_var,
 	.fb_set_par	= vga16fb_set_par,
 	.fb_setcolreg 	= vga16fb_setcolreg,
@@ -1306,6 +1315,11 @@ static int __devinit vga16fb_probe(struct platform_device *dev)
 		ret = -ENOMEM;
 		goto err_fb_alloc;
 	}
+	info->apertures = alloc_apertures(1);
+	if (!info->apertures) {
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
 
 	/* XXX share VGA_FB_PHYS and I/O region with vgacon and others */
 	info->screen_base = (void __iomem *)VGA_MAP_MEM(VGA_FB_PHYS, 0);
@@ -1335,7 +1349,7 @@ static int __devinit vga16fb_probe(struct platform_device *dev)
 	info->fix = vga16fb_fix;
 	/* supports rectangles with widths of multiples of 8 */
 	info->pixmap.blit_x = 1 << 7 | 1 << 15 | 1 << 23 | 1 << 31;
-	info->flags = FBINFO_FLAG_DEFAULT |
+	info->flags = FBINFO_FLAG_DEFAULT | FBINFO_MISC_FIRMWARE |
 		FBINFO_HWACCEL_YPAN;
 
 	i = (info->var.bits_per_pixel == 8) ? 256 : 16;
@@ -1354,6 +1368,9 @@ static int __devinit vga16fb_probe(struct platform_device *dev)
 
 	vga16fb_update_fix(info);
 
+	info->apertures->ranges[0].base = VGA_FB_PHYS;
+	info->apertures->ranges[0].size = VGA_FB_PHYS_LEN;
+
 	if (register_framebuffer(info) < 0) {
 		printk(KERN_ERR "vga16fb: unable to register framebuffer\n");
 		ret = -EINVAL;
@@ -1380,13 +1397,8 @@ static int vga16fb_remove(struct platform_device *dev)
 {
 	struct fb_info *info = platform_get_drvdata(dev);
 
-	if (info) {
+	if (info)
 		unregister_framebuffer(info);
-		iounmap(info->screen_base);
-		fb_dealloc_cmap(&info->cmap);
-	/* XXX unshare VGA regions */
-		framebuffer_release(info);
-	}
 
 	return 0;
 }
diff --git a/drivers/video/via/Makefile b/drivers/video/via/Makefile
index eeed238ad6a..d496adb0f83 100644
--- a/drivers/video/via/Makefile
+++ b/drivers/video/via/Makefile
@@ -4,4 +4,6 @@
 
 obj-$(CONFIG_FB_VIA) += viafb.o
 
-viafb-y	:=viafbdev.o hw.o via_i2c.o dvi.o lcd.o ioctl.o accel.o via_utility.o vt1636.o global.o tblDPASetting.o viamode.o tbl1636.o
+viafb-y	:=viafbdev.o hw.o via_i2c.o dvi.o lcd.o ioctl.o accel.o \
+	via_utility.o vt1636.o global.o tblDPASetting.o viamode.o tbl1636.o \
+	via-core.o via-gpio.o via_modesetting.o
diff --git a/drivers/video/via/accel.c b/drivers/video/via/accel.c
index d5077dfa9e0..e44893ea590 100644
--- a/drivers/video/via/accel.c
+++ b/drivers/video/via/accel.c
@@ -18,14 +18,45 @@
  * Foundation, Inc.,
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
+#include <linux/via-core.h>
 #include "global.h"
 
+/*
+ * Figure out an appropriate bytes-per-pixel setting.
+ */
+static int viafb_set_bpp(void __iomem *engine, u8 bpp)
+{
+	u32 gemode;
+
+	/* Preserve the reserved bits */
+	/* Lowest 2 bits to zero gives us no rotation */
+	gemode = readl(engine + VIA_REG_GEMODE) & 0xfffffcfc;
+	switch (bpp) {
+	case 8:
+		gemode |= VIA_GEM_8bpp;
+		break;
+	case 16:
+		gemode |= VIA_GEM_16bpp;
+		break;
+	case 32:
+		gemode |= VIA_GEM_32bpp;
+		break;
+	default:
+		printk(KERN_WARNING "viafb_set_bpp: Unsupported bpp %d\n", bpp);
+		return -EINVAL;
+	}
+	writel(gemode, engine + VIA_REG_GEMODE);
+	return 0;
+}
+
+
 static int hw_bitblt_1(void __iomem *engine, u8 op, u32 width, u32 height,
 	u8 dst_bpp, u32 dst_addr, u32 dst_pitch, u32 dst_x, u32 dst_y,
 	u32 *src_mem, u32 src_addr, u32 src_pitch, u32 src_x, u32 src_y,
 	u32 fg_color, u32 bg_color, u8 fill_rop)
 {
 	u32 ge_cmd = 0, tmp, i;
+	int ret;
 
 	if (!op || op > 3) {
 		printk(KERN_WARNING "hw_bitblt_1: Invalid operation: %d\n", op);
@@ -59,22 +90,9 @@ static int hw_bitblt_1(void __iomem *engine, u8 op, u32 width, u32 height,
 		}
 	}
 
-	switch (dst_bpp) {
-	case 8:
-		tmp = 0x00000000;
-		break;
-	case 16:
-		tmp = 0x00000100;
-		break;
-	case 32:
-		tmp = 0x00000300;
-		break;
-	default:
-		printk(KERN_WARNING "hw_bitblt_1: Unsupported bpp %d\n",
-			dst_bpp);
-		return -EINVAL;
-	}
-	writel(tmp, engine + 0x04);
+	ret = viafb_set_bpp(engine, dst_bpp);
+	if (ret)
+		return ret;
 
 	if (op != VIA_BITBLT_FILL) {
 		if (src_x & (op == VIA_BITBLT_MONO ? 0xFFFF8000 : 0xFFFFF000)
@@ -171,6 +189,7 @@ static int hw_bitblt_2(void __iomem *engine, u8 op, u32 width, u32 height,
 	u32 fg_color, u32 bg_color, u8 fill_rop)
 {
 	u32 ge_cmd = 0, tmp, i;
+	int ret;
 
 	if (!op || op > 3) {
 		printk(KERN_WARNING "hw_bitblt_2: Invalid operation: %d\n", op);
@@ -204,22 +223,9 @@ static int hw_bitblt_2(void __iomem *engine, u8 op, u32 width, u32 height,
 		}
 	}
 
-	switch (dst_bpp) {
-	case 8:
-		tmp = 0x00000000;
-		break;
-	case 16:
-		tmp = 0x00000100;
-		break;
-	case 32:
-		tmp = 0x00000300;
-		break;
-	default:
-		printk(KERN_WARNING "hw_bitblt_2: Unsupported bpp %d\n",
-			dst_bpp);
-		return -EINVAL;
-	}
-	writel(tmp, engine + 0x04);
+	ret = viafb_set_bpp(engine, dst_bpp);
+	if (ret)
+		return ret;
 
 	if (op == VIA_BITBLT_FILL)
 		tmp = 0;
@@ -312,17 +318,29 @@ int viafb_init_engine(struct fb_info *info)
 {
 	struct viafb_par *viapar = info->par;
 	void __iomem *engine;
+	int highest_reg, i;
 	u32 vq_start_addr, vq_end_addr, vq_start_low, vq_end_low, vq_high,
 		vq_len, chip_name = viapar->shared->chip_info.gfx_chip_name;
 
-	engine = ioremap_nocache(info->fix.mmio_start, info->fix.mmio_len);
-	viapar->shared->engine_mmio = engine;
+	engine = viapar->shared->vdev->engine_mmio;
 	if (!engine) {
 		printk(KERN_WARNING "viafb_init_accel: ioremap failed, "
 			"hardware acceleration disabled\n");
 		return -ENOMEM;
 	}
 
+	/* Initialize registers to reset the 2D engine */
+	switch (viapar->shared->chip_info.twod_engine) {
+	case VIA_2D_ENG_M1:
+		highest_reg = 0x5c;
+		break;
+	default:
+		highest_reg = 0x40;
+		break;
+	}
+	for (i = 0; i <= highest_reg; i += 4)
+		writel(0x0, engine + i);
+
 	switch (chip_name) {
 	case UNICHROME_CLE266:
 	case UNICHROME_K400:
@@ -352,13 +370,28 @@ int viafb_init_engine(struct fb_info *info)
 	viapar->shared->vq_vram_addr = viapar->fbmem_free;
 	viapar->fbmem_used += VQ_SIZE;
 
-	/* Init 2D engine reg to reset 2D engine */
-	writel(0x0, engine + VIA_REG_KEYCONTROL);
+#if defined(CONFIG_FB_VIA_CAMERA) || defined(CONFIG_FB_VIA_CAMERA_MODULE)
+	/*
+	 * Set aside a chunk of framebuffer memory for the camera
+	 * driver.  Someday this driver probably needs a proper allocator
+	 * for fbmem; for now, we just have to do this before the
+	 * framebuffer initializes itself.
+	 *
+	 * As for the size: the engine can handle three frames,
+	 * 16 bits deep, up to VGA resolution.
+	 */
+	viapar->shared->vdev->camera_fbmem_size = 3*VGA_HEIGHT*VGA_WIDTH*2;
+	viapar->fbmem_free -= viapar->shared->vdev->camera_fbmem_size;
+	viapar->fbmem_used += viapar->shared->vdev->camera_fbmem_size;
+	viapar->shared->vdev->camera_fbmem_offset = viapar->fbmem_free;
+#endif
 
 	/* Init AGP and VQ regs */
 	switch (chip_name) {
 	case UNICHROME_K8M890:
 	case UNICHROME_P4M900:
+	case UNICHROME_VX800:
+	case UNICHROME_VX855:
 		writel(0x00100000, engine + VIA_REG_CR_TRANSET);
 		writel(0x680A0000, engine + VIA_REG_CR_TRANSPACE);
 		writel(0x02000000, engine + VIA_REG_CR_TRANSPACE);
@@ -393,6 +426,8 @@ int viafb_init_engine(struct fb_info *info)
 	switch (chip_name) {
 	case UNICHROME_K8M890:
 	case UNICHROME_P4M900:
+	case UNICHROME_VX800:
+	case UNICHROME_VX855:
 		vq_start_low |= 0x20000000;
 		vq_end_low |= 0x20000000;
 		vq_high |= 0x20000000;
@@ -446,7 +481,7 @@ void viafb_show_hw_cursor(struct fb_info *info, int Status)
 	struct viafb_par *viapar = info->par;
 	u32 temp, iga_path = viapar->iga_path;
 
-	temp = readl(viapar->shared->engine_mmio + VIA_REG_CURSOR_MODE);
+	temp = readl(viapar->shared->vdev->engine_mmio + VIA_REG_CURSOR_MODE);
 	switch (Status) {
 	case HW_Cursor_ON:
 		temp |= 0x1;
@@ -463,23 +498,33 @@ void viafb_show_hw_cursor(struct fb_info *info, int Status)
 	default:
 		temp &= 0x7FFFFFFF;
 	}
-	writel(temp, viapar->shared->engine_mmio + VIA_REG_CURSOR_MODE);
+	writel(temp, viapar->shared->vdev->engine_mmio + VIA_REG_CURSOR_MODE);
 }
 
 void viafb_wait_engine_idle(struct fb_info *info)
 {
 	struct viafb_par *viapar = info->par;
 	int loop = 0;
-
-	while (!(readl(viapar->shared->engine_mmio + VIA_REG_STATUS) &
-			VIA_VR_QUEUE_BUSY) && (loop < MAXLOOP)) {
-		loop++;
-		cpu_relax();
+	u32 mask;
+	void __iomem *engine = viapar->shared->vdev->engine_mmio;
+
+	switch (viapar->shared->chip_info.twod_engine) {
+	case VIA_2D_ENG_H5:
+	case VIA_2D_ENG_M1:
+		mask = VIA_CMD_RGTR_BUSY_M1 | VIA_2D_ENG_BUSY_M1 |
+			      VIA_3D_ENG_BUSY_M1;
+		break;
+	default:
+		while (!(readl(engine + VIA_REG_STATUS) &
+				VIA_VR_QUEUE_BUSY) && (loop < MAXLOOP)) {
+			loop++;
+			cpu_relax();
+		}
+		mask = VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY | VIA_3D_ENG_BUSY;
+		break;
 	}
 
-	while ((readl(viapar->shared->engine_mmio + VIA_REG_STATUS) &
-		    (VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY | VIA_3D_ENG_BUSY)) &&
-		    (loop < MAXLOOP)) {
+	while ((readl(engine + VIA_REG_STATUS) & mask) && (loop < MAXLOOP)) {
 		loop++;
 		cpu_relax();
 	}
diff --git a/drivers/video/via/accel.h b/drivers/video/via/accel.h
index 615c84ad0f0..2c122d29236 100644
--- a/drivers/video/via/accel.h
+++ b/drivers/video/via/accel.h
@@ -67,6 +67,34 @@
 /* from 0x100 to 0x1ff */
 #define VIA_REG_COLORPAT        0x100
 
+/* defines for VIA 2D registers for vt3353/3409 (M1 engine)*/
+#define VIA_REG_GECMD_M1        0x000
+#define VIA_REG_GEMODE_M1       0x004
+#define VIA_REG_GESTATUS_M1     0x004       /* as same as VIA_REG_GEMODE */
+#define VIA_REG_PITCH_M1        0x008       /* pitch of src and dst */
+#define VIA_REG_DIMENSION_M1    0x00C       /* width and height */
+#define VIA_REG_DSTPOS_M1       0x010
+#define VIA_REG_LINE_XY_M1      0x010
+#define VIA_REG_DSTBASE_M1      0x014
+#define VIA_REG_SRCPOS_M1       0x018
+#define VIA_REG_LINE_K1K2_M1    0x018
+#define VIA_REG_SRCBASE_M1      0x01C
+#define VIA_REG_PATADDR_M1      0x020
+#define VIA_REG_MONOPAT0_M1     0x024
+#define VIA_REG_MONOPAT1_M1     0x028
+#define VIA_REG_OFFSET_M1       0x02C
+#define VIA_REG_LINE_ERROR_M1   0x02C
+#define VIA_REG_CLIPTL_M1       0x040       /* top and left of clipping */
+#define VIA_REG_CLIPBR_M1       0x044       /* bottom and right of clipping */
+#define VIA_REG_KEYCONTROL_M1   0x048       /* color key control */
+#define VIA_REG_FGCOLOR_M1      0x04C
+#define VIA_REG_DSTCOLORKEY_M1  0x04C       /* as same as VIA_REG_FG */
+#define VIA_REG_BGCOLOR_M1      0x050
+#define VIA_REG_SRCCOLORKEY_M1  0x050       /* as same as VIA_REG_BG */
+#define VIA_REG_MONOPATFGC_M1   0x058       /* Add BG color of Pattern. */
+#define VIA_REG_MONOPATBGC_M1   0x05C       /* Add FG color of Pattern. */
+#define VIA_REG_COLORPAT_M1     0x100       /* from 0x100 to 0x1ff */
+
 /* VIA_REG_PITCH(0x38): Pitch Setting */
 #define VIA_PITCH_ENABLE        0x80000000
 
@@ -157,6 +185,18 @@
 /* Virtual Queue is busy */
 #define VIA_VR_QUEUE_BUSY       0x00020000
 
+/* VIA_REG_STATUS(0x400): Engine Status for H5 */
+#define VIA_CMD_RGTR_BUSY_H5   0x00000010  /* Command Regulator is busy */
+#define VIA_2D_ENG_BUSY_H5     0x00000002  /* 2D Engine is busy */
+#define VIA_3D_ENG_BUSY_H5     0x00001FE1  /* 3D Engine is busy */
+#define VIA_VR_QUEUE_BUSY_H5   0x00000004  /* Virtual Queue is busy */
+
+/* VIA_REG_STATUS(0x400): Engine Status for VT3353/3409 */
+#define VIA_CMD_RGTR_BUSY_M1   0x00000010  /* Command Regulator is busy */
+#define VIA_2D_ENG_BUSY_M1     0x00000002  /* 2D Engine is busy */
+#define VIA_3D_ENG_BUSY_M1     0x00001FE1  /* 3D Engine is busy */
+#define VIA_VR_QUEUE_BUSY_M1   0x00000004  /* Virtual Queue is busy */
+
 #define MAXLOOP                 0xFFFFFF
 
 #define VIA_BITBLT_COLOR	1
diff --git a/drivers/video/via/chip.h b/drivers/video/via/chip.h
index 8c06bd3c0b4..d9b6e06e070 100644
--- a/drivers/video/via/chip.h
+++ b/drivers/video/via/chip.h
@@ -121,9 +121,17 @@ struct lvds_chip_information {
 	int i2c_port;
 };
 
+/* The type of 2D engine */
+enum via_2d_engine {
+	VIA_2D_ENG_H2,
+	VIA_2D_ENG_H5,
+	VIA_2D_ENG_M1,
+};
+
 struct chip_information {
 	int gfx_chip_name;
 	int gfx_chip_revision;
+	enum via_2d_engine twod_engine;
 	struct tmds_chip_information tmds_chip_info;
 	struct lvds_chip_information lvds_chip_info;
 	struct lvds_chip_information lvds_chip_info2;
diff --git a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c
index abe59b8c7a0..39b040bb381 100644
--- a/drivers/video/via/dvi.c
+++ b/drivers/video/via/dvi.c
@@ -18,6 +18,8 @@
  * Foundation, Inc.,
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
+#include <linux/via-core.h>
+#include <linux/via_i2c.h>
 #include "global.h"
 
 static void tmds_register_write(int index, u8 data);
@@ -96,7 +98,7 @@ int viafb_tmds_trasmitter_identify(void)
 	viaparinfo->chip_info->tmds_chip_info.tmds_chip_name = VT1632_TMDS;
 	viaparinfo->chip_info->
 		tmds_chip_info.tmds_chip_slave_addr = VT1632_TMDS_I2C_ADDR;
-	viaparinfo->chip_info->tmds_chip_info.i2c_port = I2CPORTINDEX;
+	viaparinfo->chip_info->tmds_chip_info.i2c_port = VIA_PORT_31;
 	if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID) != FAIL) {
 		/*
 		 * Currently only support 12bits,dual edge,add 24bits mode later
@@ -110,7 +112,7 @@ int viafb_tmds_trasmitter_identify(void)
 			  viaparinfo->chip_info->tmds_chip_info.i2c_port);
 		return OK;
 	} else {
-		viaparinfo->chip_info->tmds_chip_info.i2c_port = GPIOPORTINDEX;
+		viaparinfo->chip_info->tmds_chip_info.i2c_port = VIA_PORT_2C;
 		if (check_tmds_chip(VT1632_DEVICE_ID_REG, VT1632_DEVICE_ID)
 		    != FAIL) {
 			tmds_register_write(0x08, 0x3b);
@@ -160,32 +162,26 @@ int viafb_tmds_trasmitter_identify(void)
 
 static void tmds_register_write(int index, u8 data)
 {
-	viaparinfo->shared->i2c_stuff.i2c_port =
-		viaparinfo->chip_info->tmds_chip_info.i2c_port;
-
-	viafb_i2c_writebyte(viaparinfo->chip_info->tmds_chip_info.
-		tmds_chip_slave_addr, index,
-		     data);
+	viafb_i2c_writebyte(viaparinfo->chip_info->tmds_chip_info.i2c_port,
+			    viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr,
+			    index, data);
 }
 
 static int tmds_register_read(int index)
 {
 	u8 data;
 
-	viaparinfo->shared->i2c_stuff.i2c_port =
-		viaparinfo->chip_info->tmds_chip_info.i2c_port;
-	viafb_i2c_readbyte((u8) viaparinfo->chip_info->
-	    tmds_chip_info.tmds_chip_slave_addr,
-			(u8) index, &data);
+	viafb_i2c_readbyte(viaparinfo->chip_info->tmds_chip_info.i2c_port,
+			   (u8) viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr,
+			   (u8) index, &data);
 	return data;
 }
 
 static int tmds_register_read_bytes(int index, u8 *buff, int buff_len)
 {
-	viaparinfo->shared->i2c_stuff.i2c_port =
-		viaparinfo->chip_info->tmds_chip_info.i2c_port;
-	viafb_i2c_readbytes((u8) viaparinfo->chip_info->tmds_chip_info.
-			 tmds_chip_slave_addr, (u8) index, buff, buff_len);
+	viafb_i2c_readbytes(viaparinfo->chip_info->tmds_chip_info.i2c_port,
+			    (u8) viaparinfo->chip_info->tmds_chip_info.tmds_chip_slave_addr,
+			    (u8) index, buff, buff_len);
 	return 0;
 }
 
@@ -541,9 +537,10 @@ void viafb_dvi_enable(void)
 				else
 					data = 0x37;
 				viafb_i2c_writebyte(viaparinfo->chip_info->
-					     tmds_chip_info.
-					     tmds_chip_slave_addr,
-					     0x08, data);
+						       tmds_chip_info.i2c_port,
+						    viaparinfo->chip_info->
+						       tmds_chip_info.tmds_chip_slave_addr,
+						    0x08, data);
 			}
 		}
 	}
diff --git a/drivers/video/via/global.h b/drivers/video/via/global.h
index 8d95d5fd138..28221a062dd 100644
--- a/drivers/video/via/global.h
+++ b/drivers/video/via/global.h
@@ -41,7 +41,6 @@
 #include "share.h"
 #include "dvi.h"
 #include "viamode.h"
-#include "via_i2c.h"
 #include "hw.h"
 
 #include "lcd.h"
diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index f2583b1b527..b996803ae2c 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -19,6 +19,7 @@
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
+#include <linux/via-core.h>
 #include "global.h"
 
 static struct pll_map pll_value[] = {
@@ -62,6 +63,7 @@ static struct pll_map pll_value[] = {
 	 CX700_52_977M,	VX855_52_977M},
 	{CLK_56_250M, CLE266_PLL_56_250M, K800_PLL_56_250M,
 	 CX700_56_250M, VX855_56_250M},
+	{CLK_57_275M, 0, 0, 0, VX855_57_275M},
 	{CLK_60_466M, CLE266_PLL_60_466M, K800_PLL_60_466M,
 	 CX700_60_466M, VX855_60_466M},
 	{CLK_61_500M, CLE266_PLL_61_500M, K800_PLL_61_500M,
@@ -525,8 +527,7 @@ static void dvi_patch_skew_dvp_low(void);
 static void set_dvi_output_path(int set_iga, int output_interface);
 static void set_lcd_output_path(int set_iga, int output_interface);
 static void load_fix_bit_crtc_reg(void);
-static void init_gfx_chip_info(struct pci_dev *pdev,
-				const struct pci_device_id *pdi);
+static void init_gfx_chip_info(int chip_type);
 static void init_tmds_chip_info(void);
 static void init_lvds_chip_info(void);
 static void device_screen_off(void);
@@ -537,18 +538,6 @@ static void device_on(void);
 static void enable_second_display_channel(void);
 static void disable_second_display_channel(void);
 
-void viafb_write_reg(u8 index, u16 io_port, u8 data)
-{
-	outb(index, io_port);
-	outb(data, io_port + 1);
-	/*DEBUG_MSG(KERN_INFO "\nIndex=%2d Value=%2d", index, data); */
-}
-u8 viafb_read_reg(int io_port, u8 index)
-{
-	outb(index, io_port);
-	return inb(io_port + 1);
-}
-
 void viafb_lock_crt(void)
 {
 	viafb_write_reg_mask(CR11, VIACR, BIT7, BIT7);
@@ -560,16 +549,6 @@ void viafb_unlock_crt(void)
 	viafb_write_reg_mask(CR47, VIACR, 0, BIT0);
 }
 
-void viafb_write_reg_mask(u8 index, int io_port, u8 data, u8 mask)
-{
-	u8 tmp;
-
-	outb(index, io_port);
-	tmp = inb(io_port + 1);
-	outb((data & mask) | (tmp & (~mask)), io_port + 1);
-	/*DEBUG_MSG(KERN_INFO "\nIndex=%2d Value=%2d", index, tmp); */
-}
-
 void write_dac_reg(u8 index, u8 r, u8 g, u8 b)
 {
 	outb(index, LUT_INDEX_WRITE);
@@ -646,102 +625,6 @@ void viafb_set_iga_path(void)
 	}
 }
 
-void viafb_set_primary_address(u32 addr)
-{
-	DEBUG_MSG(KERN_DEBUG "viafb_set_primary_address(0x%08X)\n", addr);
-	viafb_write_reg(CR0D, VIACR, addr & 0xFF);
-	viafb_write_reg(CR0C, VIACR, (addr >> 8) & 0xFF);
-	viafb_write_reg(CR34, VIACR, (addr >> 16) & 0xFF);
-	viafb_write_reg_mask(CR48, VIACR, (addr >> 24) & 0x1F, 0x1F);
-}
-
-void viafb_set_secondary_address(u32 addr)
-{
-	DEBUG_MSG(KERN_DEBUG "viafb_set_secondary_address(0x%08X)\n", addr);
-	/* secondary display supports only quadword aligned memory */
-	viafb_write_reg_mask(CR62, VIACR, (addr >> 2) & 0xFE, 0xFE);
-	viafb_write_reg(CR63, VIACR, (addr >> 10) & 0xFF);
-	viafb_write_reg(CR64, VIACR, (addr >> 18) & 0xFF);
-	viafb_write_reg_mask(CRA3, VIACR, (addr >> 26) & 0x07, 0x07);
-}
-
-void viafb_set_primary_pitch(u32 pitch)
-{
-	DEBUG_MSG(KERN_DEBUG "viafb_set_primary_pitch(0x%08X)\n", pitch);
-	/* spec does not say that first adapter skips 3 bits but old
-	 * code did it and seems to be reasonable in analogy to 2nd adapter
-	 */
-	pitch = pitch >> 3;
-	viafb_write_reg(0x13, VIACR, pitch & 0xFF);
-	viafb_write_reg_mask(0x35, VIACR, (pitch >> (8 - 5)) & 0xE0, 0xE0);
-}
-
-void viafb_set_secondary_pitch(u32 pitch)
-{
-	DEBUG_MSG(KERN_DEBUG "viafb_set_secondary_pitch(0x%08X)\n", pitch);
-	pitch = pitch >> 3;
-	viafb_write_reg(0x66, VIACR, pitch & 0xFF);
-	viafb_write_reg_mask(0x67, VIACR, (pitch >> 8) & 0x03, 0x03);
-	viafb_write_reg_mask(0x71, VIACR, (pitch >> (10 - 7)) & 0x80, 0x80);
-}
-
-void viafb_set_primary_color_depth(u8 depth)
-{
-	u8 value;
-
-	DEBUG_MSG(KERN_DEBUG "viafb_set_primary_color_depth(%d)\n", depth);
-	switch (depth) {
-	case 8:
-		value = 0x00;
-		break;
-	case 15:
-		value = 0x04;
-		break;
-	case 16:
-		value = 0x14;
-		break;
-	case 24:
-		value = 0x0C;
-		break;
-	case 30:
-		value = 0x08;
-		break;
-	default:
-		printk(KERN_WARNING "viafb_set_primary_color_depth: "
-			"Unsupported depth: %d\n", depth);
-		return;
-	}
-
-	viafb_write_reg_mask(0x15, VIASR, value, 0x1C);
-}
-
-void viafb_set_secondary_color_depth(u8 depth)
-{
-	u8 value;
-
-	DEBUG_MSG(KERN_DEBUG "viafb_set_secondary_color_depth(%d)\n", depth);
-	switch (depth) {
-	case 8:
-		value = 0x00;
-		break;
-	case 16:
-		value = 0x40;
-		break;
-	case 24:
-		value = 0xC0;
-		break;
-	case 30:
-		value = 0x80;
-		break;
-	default:
-		printk(KERN_WARNING "viafb_set_secondary_color_depth: "
-			"Unsupported depth: %d\n", depth);
-		return;
-	}
-
-	viafb_write_reg_mask(0x67, VIACR, value, 0xC0);
-}
-
 static void set_color_register(u8 index, u8 red, u8 green, u8 blue)
 {
 	outb(0xFF, 0x3C6); /* bit mask of palette */
@@ -1126,16 +1009,12 @@ void viafb_load_reg(int timing_value, int viafb_load_reg_num,
 void viafb_write_regx(struct io_reg RegTable[], int ItemNum)
 {
 	int i;
-	unsigned char RegTemp;
 
 	/*DEBUG_MSG(KERN_INFO "Table Size : %x!!\n",ItemNum ); */
 
-	for (i = 0; i < ItemNum; i++) {
-		outb(RegTable[i].index, RegTable[i].port);
-		RegTemp = inb(RegTable[i].port + 1);
-		RegTemp = (RegTemp & (~RegTable[i].mask)) | RegTable[i].value;
-		outb(RegTemp, RegTable[i].port + 1);
-	}
+	for (i = 0; i < ItemNum; i++)
+		via_write_reg_mask(RegTable[i].port, RegTable[i].index,
+			RegTable[i].value, RegTable[i].mask);
 }
 
 void viafb_load_fetch_count_reg(int h_addr, int bpp_byte, int set_iga)
@@ -1516,8 +1395,6 @@ u32 viafb_get_clk_value(int clk)
 /* Set VCLK*/
 void viafb_set_vclock(u32 CLK, int set_iga)
 {
-	unsigned char RegTemp;
-
 	/* H.W. Reset : ON */
 	viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7);
 
@@ -1590,8 +1467,7 @@ void viafb_set_vclock(u32 CLK, int set_iga)
 	}
 
 	/* Fire! */
-	RegTemp = inb(VIARMisc);
-	outb(RegTemp | (BIT2 + BIT3), VIAWMisc);
+	via_write_misc_reg_mask(0x0C, 0x0C); /* select external clock */
 }
 
 void viafb_load_crtc_timing(struct display_timing device_timing,
@@ -1835,6 +1711,7 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
 	int index = 0;
 	int h_addr, v_addr;
 	u32 pll_D_N;
+	u8 polarity = 0;
 
 	for (i = 0; i < video_mode->mode_array; i++) {
 		index = i;
@@ -1863,20 +1740,11 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
 	v_addr = crt_reg.ver_addr;
 
 	/* update polarity for CRT timing */
-	if (crt_table[index].h_sync_polarity == NEGATIVE) {
-		if (crt_table[index].v_sync_polarity == NEGATIVE)
-			outb((inb(VIARMisc) & (~(BIT6 + BIT7))) |
-			     (BIT6 + BIT7), VIAWMisc);
-		else
-			outb((inb(VIARMisc) & (~(BIT6 + BIT7))) | (BIT6),
-			     VIAWMisc);
-	} else {
-		if (crt_table[index].v_sync_polarity == NEGATIVE)
-			outb((inb(VIARMisc) & (~(BIT6 + BIT7))) | (BIT7),
-			     VIAWMisc);
-		else
-			outb((inb(VIARMisc) & (~(BIT6 + BIT7))), VIAWMisc);
-	}
+	if (crt_table[index].h_sync_polarity == NEGATIVE)
+		polarity |= BIT6;
+	if (crt_table[index].v_sync_polarity == NEGATIVE)
+		polarity |= BIT7;
+	via_write_misc_reg_mask(polarity, BIT6 | BIT7);
 
 	if (set_iga == IGA1) {
 		viafb_unlock_crt();
@@ -1910,10 +1778,9 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
 
 }
 
-void viafb_init_chip_info(struct pci_dev *pdev,
-			  const struct pci_device_id *pdi)
+void viafb_init_chip_info(int chip_type)
 {
-	init_gfx_chip_info(pdev, pdi);
+	init_gfx_chip_info(chip_type);
 	init_tmds_chip_info();
 	init_lvds_chip_info();
 
@@ -1980,12 +1847,11 @@ void viafb_update_device_setting(int hres, int vres,
 	}
 }
 
-static void init_gfx_chip_info(struct pci_dev *pdev,
-			       const struct pci_device_id *pdi)
+static void init_gfx_chip_info(int chip_type)
 {
 	u8 tmp;
 
-	viaparinfo->chip_info->gfx_chip_name = pdi->driver_data;
+	viaparinfo->chip_info->gfx_chip_name = chip_type;
 
 	/* Check revision of CLE266 Chip */
 	if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) {
@@ -2016,6 +1882,21 @@ static void init_gfx_chip_info(struct pci_dev *pdev,
 				CX700_REVISION_700;
 		}
 	}
+
+	/* Determine which 2D engine we have */
+	switch (viaparinfo->chip_info->gfx_chip_name) {
+	case UNICHROME_VX800:
+	case UNICHROME_VX855:
+		viaparinfo->chip_info->twod_engine = VIA_2D_ENG_M1;
+		break;
+	case UNICHROME_K8M890:
+	case UNICHROME_P4M900:
+		viaparinfo->chip_info->twod_engine = VIA_2D_ENG_H5;
+		break;
+	default:
+		viaparinfo->chip_info->twod_engine = VIA_2D_ENG_H2;
+		break;
+	}
 }
 
 static void init_tmds_chip_info(void)
@@ -2232,13 +2113,11 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
 
 	/* Fill VPIT Parameters */
 	/* Write Misc Register */
-	outb(VPIT.Misc, VIAWMisc);
+	outb(VPIT.Misc, VIA_MISC_REG_WRITE);
 
 	/* Write Sequencer */
-	for (i = 1; i <= StdSR; i++) {
-		outb(i, VIASR);
-		outb(VPIT.SR[i - 1], VIASR + 1);
-	}
+	for (i = 1; i <= StdSR; i++)
+		via_write_reg(VIASR, i, VPIT.SR[i - 1]);
 
 	viafb_write_reg_mask(0x15, VIASR, 0xA2, 0xA2);
 	viafb_set_iga_path();
@@ -2247,10 +2126,8 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
 	viafb_fill_crtc_timing(crt_timing, vmode_tbl, video_bpp / 8, IGA1);
 
 	/* Write Graphic Controller */
-	for (i = 0; i < StdGR; i++) {
-		outb(i, VIAGR);
-		outb(VPIT.GR[i], VIAGR + 1);
-	}
+	for (i = 0; i < StdGR; i++)
+		via_write_reg(VIAGR, i, VPIT.GR[i]);
 
 	/* Write Attribute Controller */
 	for (i = 0; i < StdAR; i++) {
@@ -2277,11 +2154,11 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
 		}
 	}
 
-	viafb_set_primary_pitch(viafbinfo->fix.line_length);
-	viafb_set_secondary_pitch(viafb_dual_fb ? viafbinfo1->fix.line_length
+	via_set_primary_pitch(viafbinfo->fix.line_length);
+	via_set_secondary_pitch(viafb_dual_fb ? viafbinfo1->fix.line_length
 		: viafbinfo->fix.line_length);
-	viafb_set_primary_color_depth(viaparinfo->depth);
-	viafb_set_secondary_color_depth(viafb_dual_fb ? viaparinfo1->depth
+	via_set_primary_color_depth(viaparinfo->depth);
+	via_set_secondary_color_depth(viafb_dual_fb ? viaparinfo1->depth
 		: viaparinfo->depth);
 	/* Update Refresh Rate Setting */
 
@@ -2473,108 +2350,6 @@ static void disable_second_display_channel(void)
 	viafb_write_reg_mask(CR6A, VIACR, BIT6, BIT6);
 }
 
-int viafb_get_fb_size_from_pci(void)
-{
-	unsigned long configid, deviceid, FBSize = 0;
-	int VideoMemSize;
-	int DeviceFound = false;
-
-	for (configid = 0x80000000; configid < 0x80010800; configid += 0x100) {
-		outl(configid, (unsigned long)0xCF8);
-		deviceid = (inl((unsigned long)0xCFC) >> 16) & 0xffff;
-
-		switch (deviceid) {
-		case CLE266:
-		case KM400:
-			outl(configid + 0xE0, (unsigned long)0xCF8);
-			FBSize = inl((unsigned long)0xCFC);
-			DeviceFound = true;	/* Found device id */
-			break;
-
-		case CN400_FUNCTION3:
-		case CN700_FUNCTION3:
-		case CX700_FUNCTION3:
-		case KM800_FUNCTION3:
-		case KM890_FUNCTION3:
-		case P4M890_FUNCTION3:
-		case P4M900_FUNCTION3:
-		case VX800_FUNCTION3:
-		case VX855_FUNCTION3:
-			/*case CN750_FUNCTION3: */
-			outl(configid + 0xA0, (unsigned long)0xCF8);
-			FBSize = inl((unsigned long)0xCFC);
-			DeviceFound = true;	/* Found device id */
-			break;
-
-		default:
-			break;
-		}
-
-		if (DeviceFound)
-			break;
-	}
-
-	DEBUG_MSG(KERN_INFO "Device ID = %lx\n", deviceid);
-
-	FBSize = FBSize & 0x00007000;
-	DEBUG_MSG(KERN_INFO "FB Size = %x\n", FBSize);
-
-	if (viaparinfo->chip_info->gfx_chip_name < UNICHROME_CX700) {
-		switch (FBSize) {
-		case 0x00004000:
-			VideoMemSize = (16 << 20);	/*16M */
-			break;
-
-		case 0x00005000:
-			VideoMemSize = (32 << 20);	/*32M */
-			break;
-
-		case 0x00006000:
-			VideoMemSize = (64 << 20);	/*64M */
-			break;
-
-		default:
-			VideoMemSize = (32 << 20);	/*32M */
-			break;
-		}
-	} else {
-		switch (FBSize) {
-		case 0x00001000:
-			VideoMemSize = (8 << 20);	/*8M */
-			break;
-
-		case 0x00002000:
-			VideoMemSize = (16 << 20);	/*16M */
-			break;
-
-		case 0x00003000:
-			VideoMemSize = (32 << 20);	/*32M */
-			break;
-
-		case 0x00004000:
-			VideoMemSize = (64 << 20);	/*64M */
-			break;
-
-		case 0x00005000:
-			VideoMemSize = (128 << 20);	/*128M */
-			break;
-
-		case 0x00006000:
-			VideoMemSize = (256 << 20);	/*256M */
-			break;
-
-		case 0x00007000:	/* Only on VX855/875 */
-			VideoMemSize = (512 << 20);	/*512M */
-			break;
-
-		default:
-			VideoMemSize = (32 << 20);	/*32M */
-			break;
-		}
-	}
-
-	return VideoMemSize;
-}
 
 void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
 					*p_gfx_dpa_setting)
diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index 12ef32d334c..a109de37981 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -24,6 +24,11 @@
 
 #include "viamode.h"
 #include "global.h"
+#include "via_modesetting.h"
+
+#define viafb_read_reg(p, i)			via_read_reg(p, i)
+#define viafb_write_reg(i, p, d)		via_write_reg(p, i, d)
+#define viafb_write_reg_mask(i, p, d, m)	via_write_reg_mask(p, i, d, m)
 
 /***************************************************
 * Definition IGA1 Design Method of CRTC Registers *
@@ -823,8 +828,8 @@ struct iga2_crtc_timing {
 };
 
 /* device ID */
-#define CLE266              0x3123
-#define KM400               0x3205
+#define CLE266_FUNCTION3    0x3123
+#define KM400_FUNCTION3     0x3205
 #define CN400_FUNCTION2     0x2259
 #define CN400_FUNCTION3     0x3259
 /* support VT3314 chipset */
@@ -870,7 +875,6 @@ extern int viafb_LCD_ON;
 extern int viafb_DVI_ON;
 extern int viafb_hotplug;
 
-void viafb_write_reg_mask(u8 index, int io_port, u8 data, u8 mask);
 void viafb_set_output_path(int device, int set_iga,
 	int output_interface);
 
@@ -885,8 +889,6 @@ void viafb_crt_disable(void);
 void viafb_crt_enable(void);
 void init_ad9389(void);
 /* Access I/O Function */
-void viafb_write_reg(u8 index, u16 io_port, u8 data);
-u8 viafb_read_reg(int io_port, u8 index);
 void viafb_lock_crt(void);
 void viafb_unlock_crt(void);
 void viafb_load_fetch_count_reg(int h_addr, int bpp_byte, int set_iga);
@@ -900,20 +902,14 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
 	struct VideoModeTable *vmode_tbl1, int video_bpp1);
 void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
 	struct VideoModeTable *vmode_tbl);
-void viafb_init_chip_info(struct pci_dev *pdev,
-			  const struct pci_device_id *pdi);
+void viafb_init_chip_info(int chip_type);
 void viafb_init_dac(int set_iga);
 int viafb_get_pixclock(int hres, int vres, int vmode_refresh);
 int viafb_get_refresh(int hres, int vres, u32 float_refresh);
 void viafb_update_device_setting(int hres, int vres, int bpp,
 			   int vmode_refresh, int flag);
 
-int viafb_get_fb_size_from_pci(void);
 void viafb_set_iga_path(void);
-void viafb_set_primary_address(u32 addr);
-void viafb_set_secondary_address(u32 addr);
-void viafb_set_primary_pitch(u32 pitch);
-void viafb_set_secondary_pitch(u32 pitch);
 void viafb_set_primary_color_register(u8 index, u8 red, u8 green, u8 blue);
 void viafb_set_secondary_color_register(u8 index, u8 red, u8 green, u8 blue);
 void viafb_get_fb_info(unsigned int *fb_base, unsigned int *fb_len);
diff --git a/drivers/video/via/ioctl.h b/drivers/video/via/ioctl.h
index de899807ead..c430fa23008 100644
--- a/drivers/video/via/ioctl.h
+++ b/drivers/video/via/ioctl.h
@@ -75,7 +75,7 @@
 /*SAMM operation flag*/
 #define OP_SAMM            0x80
 
-#define LCD_PANEL_ID_MAXIMUM	22
+#define LCD_PANEL_ID_MAXIMUM	23
 
 #define STATE_ON            0x1
 #define STATE_OFF           0x0
diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 1b1ccdc2d83..2ab0f156439 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -18,7 +18,8 @@
  * Foundation, Inc.,
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
-
+#include <linux/via-core.h>
+#include <linux/via_i2c.h>
 #include "global.h"
 #include "lcdtbl.h"
 
@@ -172,18 +173,16 @@ static bool lvds_identify_integratedlvds(void)
 
 int viafb_lvds_trasmitter_identify(void)
 {
-	viaparinfo->shared->i2c_stuff.i2c_port = I2CPORTINDEX;
-	if (viafb_lvds_identify_vt1636()) {
-		viaparinfo->chip_info->lvds_chip_info.i2c_port = I2CPORTINDEX;
+	if (viafb_lvds_identify_vt1636(VIA_PORT_31)) {
+		viaparinfo->chip_info->lvds_chip_info.i2c_port = VIA_PORT_31;
 		DEBUG_MSG(KERN_INFO
-			  "Found VIA VT1636 LVDS on port i2c 0x31 \n");
+			  "Found VIA VT1636 LVDS on port i2c 0x31\n");
 	} else {
-		viaparinfo->shared->i2c_stuff.i2c_port = GPIOPORTINDEX;
-		if (viafb_lvds_identify_vt1636()) {
+		if (viafb_lvds_identify_vt1636(VIA_PORT_2C)) {
 			viaparinfo->chip_info->lvds_chip_info.i2c_port =
-				GPIOPORTINDEX;
+				VIA_PORT_2C;
 			DEBUG_MSG(KERN_INFO
-				  "Found VIA VT1636 LVDS on port gpio 0x2c \n");
+				  "Found VIA VT1636 LVDS on port gpio 0x2c\n");
 		}
 	}
 
@@ -398,6 +397,15 @@ static void fp_id_to_vindex(int panel_id)
 		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
 		viaparinfo->lvds_setting_info->LCDDithering = 1;
 		break;
+	case 0x17:
+		/* OLPC XO-1.5 panel */
+		viaparinfo->lvds_setting_info->lcd_panel_hres = 1200;
+		viaparinfo->lvds_setting_info->lcd_panel_vres = 900;
+		viaparinfo->lvds_setting_info->lcd_panel_id =
+			LCD_PANEL_IDD_1200X900;
+		viaparinfo->lvds_setting_info->device_lcd_dualedge = 0;
+		viaparinfo->lvds_setting_info->LCDDithering = 0;
+		break;
 	default:
 		viaparinfo->lvds_setting_info->lcd_panel_hres = 800;
 		viaparinfo->lvds_setting_info->lcd_panel_vres = 600;
@@ -412,9 +420,8 @@ static int lvds_register_read(int index)
 {
 	u8 data;
 
-	viaparinfo->shared->i2c_stuff.i2c_port = GPIOPORTINDEX;
-	viafb_i2c_readbyte((u8) viaparinfo->chip_info->
-	    lvds_chip_info.lvds_chip_slave_addr,
+	viafb_i2c_readbyte(VIA_PORT_2C,
+			(u8) viaparinfo->chip_info->lvds_chip_info.lvds_chip_slave_addr,
 			(u8) index, &data);
 	return data;
 }
diff --git a/drivers/video/via/lcd.h b/drivers/video/via/lcd.h
index 071f47cf5be..9762ec62b49 100644
--- a/drivers/video/via/lcd.h
+++ b/drivers/video/via/lcd.h
@@ -60,6 +60,8 @@
 #define     LCD_PANEL_IDB_1360X768     0x0B
 /* Resolution: 480x640,  Channel: single, Dithering: Enable */
 #define     LCD_PANEL_IDC_480X640      0x0C
+/* Resolution: 1200x900,  Channel: single, Dithering: Disable */
+#define     LCD_PANEL_IDD_1200X900      0x0D
 
 
 extern int viafb_LCD2_ON;
diff --git a/drivers/video/via/share.h b/drivers/video/via/share.h
index d55aaa7b912..7f0de7f006a 100644
--- a/drivers/video/via/share.h
+++ b/drivers/video/via/share.h
@@ -43,16 +43,9 @@
 /* Video Memory Size */
 #define VIDEO_MEMORY_SIZE_16M    0x1000000
 
-/* standard VGA IO port
-*/
-#define VIARMisc    0x3CC
-#define VIAWMisc    0x3C2
-#define VIAStatus   0x3DA
-#define VIACR       0x3D4
-#define VIASR       0x3C4
-#define VIAGR       0x3CE
-#define VIAAR       0x3C0
-
+/*
+ * Lengths of the VPIT structure arrays.
+ */
 #define StdCR       0x19
 #define StdSR       0x04
 #define StdGR       0x09
@@ -570,6 +563,10 @@
 #define M1200X720_R60_HSP       NEGATIVE
 #define M1200X720_R60_VSP       POSITIVE
 
+/* 1200x900@60 Sync Polarity (DCON) */
+#define M1200X900_R60_HSP       NEGATIVE
+#define M1200X900_R60_VSP       NEGATIVE
+
 /* 1280x600@60 Sync Polarity (GTF Mode) */
 #define M1280x600_R60_HSP       NEGATIVE
 #define M1280x600_R60_VSP       POSITIVE
@@ -651,6 +648,7 @@
 #define CLK_52_406M     52406000
 #define CLK_52_977M     52977000
 #define CLK_56_250M     56250000
+#define CLK_57_275M     57275000
 #define CLK_60_466M     60466000
 #define CLK_61_500M     61500000
 #define CLK_65_000M     65000000
@@ -939,6 +937,7 @@
 #define VX855_52_406M     0x00580C03
 #define VX855_52_977M     0x00940C05
 #define VX855_56_250M     0x009D0C05
+#define VX855_57_275M     0x009D8C85    /* Used by XO panel */
 #define VX855_60_466M     0x00A90C05
 #define VX855_61_500M     0x00AC0C05
 #define VX855_65_000M     0x006D0C03
@@ -1065,6 +1064,7 @@
 #define RES_1600X1200_60HZ_PIXCLOCK  6172
 #define RES_1600X1200_75HZ_PIXCLOCK  4938
 #define RES_1280X720_60HZ_PIXCLOCK   13426
+#define RES_1200X900_60HZ_PIXCLOCK   17459
 #define RES_1920X1080_60HZ_PIXCLOCK  5787
 #define RES_1400X1050_60HZ_PIXCLOCK  8214
 #define RES_1400X1050_75HZ_PIXCLOCK  6410
diff --git a/drivers/video/via/via-core.c b/drivers/video/via/via-core.c
new file mode 100644
index 00000000000..e8cfe839211
--- /dev/null
+++ b/drivers/video/via/via-core.c
@@ -0,0 +1,668 @@
+/*
+ * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+ * Copyright 2009 Jonathan Corbet <corbet@lwn.net>
+ */
+
+/*
+ * Core code for the Via multifunction framebuffer device.
+ */
+#include <linux/via-core.h>
+#include <linux/via_i2c.h>
+#include <linux/via-gpio.h>
+#include "global.h"
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+/*
+ * The default port config.
+ */
+static struct via_port_cfg adap_configs[] = {
+	[VIA_PORT_26]	= { VIA_PORT_I2C,  VIA_MODE_OFF, VIASR, 0x26 },
+	[VIA_PORT_31]	= { VIA_PORT_I2C,  VIA_MODE_I2C, VIASR, 0x31 },
+	[VIA_PORT_25]	= { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x25 },
+	[VIA_PORT_2C]	= { VIA_PORT_GPIO, VIA_MODE_I2C, VIASR, 0x2c },
+	[VIA_PORT_3D]	= { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x3d },
+	{ 0, 0, 0, 0 }
+};
+
+/*
+ * We currently only support one viafb device (will there ever be
+ * more than one?), so just declare it globally here.
+ */
+static struct viafb_dev global_dev;
+
+
+/*
+ * Basic register access; spinlock required.
+ */
+static inline void viafb_mmio_write(int reg, u32 v)
+{
+	iowrite32(v, global_dev.engine_mmio + reg);
+}
+
+static inline int viafb_mmio_read(int reg)
+{
+	return ioread32(global_dev.engine_mmio + reg);
+}
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Interrupt management.  We have a single IRQ line for a lot of
+ * different functions, so we need to share it.  The design here
+ * is that we don't want to reimplement the shared IRQ code here;
+ * we also want to avoid having contention for a single handler thread.
+ * So each subdev driver which needs interrupts just requests
+ * them directly from the kernel.  We just have what's needed for
+ * overall access to the interrupt control register.
+ */
+
+/*
+ * Which interrupts are enabled now?
+ */
+static u32 viafb_enabled_ints;
+
+static void viafb_int_init(void)
+{
+	viafb_enabled_ints = 0;
+
+	viafb_mmio_write(VDE_INTERRUPT, 0);
+}
+
+/*
+ * Allow subdevs to ask for specific interrupts to be enabled.  These
+ * functions must be called with reg_lock held
+ */
+void viafb_irq_enable(u32 mask)
+{
+	viafb_enabled_ints |= mask;
+	viafb_mmio_write(VDE_INTERRUPT, viafb_enabled_ints | VDE_I_ENABLE);
+}
+EXPORT_SYMBOL_GPL(viafb_irq_enable);
+
+void viafb_irq_disable(u32 mask)
+{
+	viafb_enabled_ints &= ~mask;
+	if (viafb_enabled_ints == 0)
+		viafb_mmio_write(VDE_INTERRUPT, 0);  /* Disable entirely */
+	else
+		viafb_mmio_write(VDE_INTERRUPT,
+				viafb_enabled_ints | VDE_I_ENABLE);
+}
+EXPORT_SYMBOL_GPL(viafb_irq_disable);
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Access to the DMA engine.  This currently provides what the camera
+ * driver needs (i.e. outgoing only) but is easily expandable if need
+ * be.
+ */
+
+/*
+ * There are four DMA channels in the vx855.  For now, we only
+ * use one of them, though.  Most of the time, the DMA channel
+ * will be idle, so we keep the IRQ handler unregistered except
+ * when some subsystem has indicated an interest.
+ */
+static int viafb_dma_users;
+static DECLARE_COMPLETION(viafb_dma_completion);
+/*
+ * This mutex protects viafb_dma_users and our global interrupt
+ * registration state; it also serializes access to the DMA
+ * engine.
+ */
+static DEFINE_MUTEX(viafb_dma_lock);
+
+/*
+ * The VX855 DMA descriptor (used for s/g transfers) looks
+ * like this.
+ */
+struct viafb_vx855_dma_descr {
+	u32	addr_low;	/* Low part of phys addr */
+	u32	addr_high;	/* High 12 bits of addr */
+	u32	fb_offset;	/* Offset into FB memory */
+	u32	seg_size;	/* Size, 16-byte units */
+	u32	tile_mode;	/* "tile mode" setting */
+	u32	next_desc_low;	/* Next descriptor addr */
+	u32	next_desc_high;
+	u32	pad;		/* Fill out to 64 bytes */
+};
+
+/*
+ * Flags added to the "next descriptor low" pointers
+ */
+#define VIAFB_DMA_MAGIC		0x01  /* ??? Just has to be there */
+#define VIAFB_DMA_FINAL_SEGMENT 0x02  /* Final segment */
+
+/*
+ * The completion IRQ handler.
+ */
+static irqreturn_t viafb_dma_irq(int irq, void *data)
+{
+	int csr;
+	irqreturn_t ret = IRQ_NONE;
+
+	spin_lock(&global_dev.reg_lock);
+	csr = viafb_mmio_read(VDMA_CSR0);
+	if (csr & VDMA_C_DONE) {
+		viafb_mmio_write(VDMA_CSR0, VDMA_C_DONE);
+		complete(&viafb_dma_completion);
+		ret = IRQ_HANDLED;
+	}
+	spin_unlock(&global_dev.reg_lock);
+	return ret;
+}
+
+/*
+ * Indicate a need for DMA functionality.
+ */
+int viafb_request_dma(void)
+{
+	int ret = 0;
+
+	/*
+	 * Only VX855 is supported currently.
+	 */
+	if (global_dev.chip_type != UNICHROME_VX855)
+		return -ENODEV;
+	/*
+	 * Note the new user and set up our interrupt handler
+	 * if need be.
+	 */
+	mutex_lock(&viafb_dma_lock);
+	viafb_dma_users++;
+	if (viafb_dma_users == 1) {
+		ret = request_irq(global_dev.pdev->irq, viafb_dma_irq,
+				IRQF_SHARED, "via-dma", &viafb_dma_users);
+		if (ret)
+			viafb_dma_users--;
+		else
+			viafb_irq_enable(VDE_I_DMA0TDEN);
+	}
+	mutex_unlock(&viafb_dma_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(viafb_request_dma);
+
+void viafb_release_dma(void)
+{
+	mutex_lock(&viafb_dma_lock);
+	viafb_dma_users--;
+	if (viafb_dma_users == 0) {
+		viafb_irq_disable(VDE_I_DMA0TDEN);
+		free_irq(global_dev.pdev->irq, &viafb_dma_users);
+	}
+	mutex_unlock(&viafb_dma_lock);
+}
+EXPORT_SYMBOL_GPL(viafb_release_dma);
+
+
+#if 0
+/*
+ * Copy a single buffer from FB memory, synchronously.  This code works
+ * but is not currently used.
+ */
+void viafb_dma_copy_out(unsigned int offset, dma_addr_t paddr, int len)
+{
+	unsigned long flags;
+	int csr;
+
+	mutex_lock(&viafb_dma_lock);
+	init_completion(&viafb_dma_completion);
+	/*
+	 * Program the controller.
+	 */
+	spin_lock_irqsave(&global_dev.reg_lock, flags);
+	viafb_mmio_write(VDMA_CSR0, VDMA_C_ENABLE|VDMA_C_DONE);
+	/* Enable ints; must happen after CSR0 write! */
+	viafb_mmio_write(VDMA_MR0, VDMA_MR_TDIE);
+	viafb_mmio_write(VDMA_MARL0, (int) (paddr & 0xfffffff0));
+	viafb_mmio_write(VDMA_MARH0, (int) ((paddr >> 28) & 0xfff));
+	/* Data sheet suggests DAR0 should be <<4, but it lies */
+	viafb_mmio_write(VDMA_DAR0, offset);
+	viafb_mmio_write(VDMA_DQWCR0, len >> 4);
+	viafb_mmio_write(VDMA_TMR0, 0);
+	viafb_mmio_write(VDMA_DPRL0, 0);
+	viafb_mmio_write(VDMA_DPRH0, 0);
+	viafb_mmio_write(VDMA_PMR0, 0);
+	csr = viafb_mmio_read(VDMA_CSR0);
+	viafb_mmio_write(VDMA_CSR0, VDMA_C_ENABLE|VDMA_C_START);
+	spin_unlock_irqrestore(&global_dev.reg_lock, flags);
+	/*
+	 * Now we just wait until the interrupt handler says
+	 * we're done.
+	 */
+	wait_for_completion_interruptible(&viafb_dma_completion);
+	viafb_mmio_write(VDMA_MR0, 0); /* Reset int enable */
+	mutex_unlock(&viafb_dma_lock);
+}
+EXPORT_SYMBOL_GPL(viafb_dma_copy_out);
+#endif
+
+/*
+ * Do a scatter/gather DMA copy from FB memory.  You must have done
+ * a successful call to viafb_request_dma() first.
+ */
+int viafb_dma_copy_out_sg(unsigned int offset, struct scatterlist *sg, int nsg)
+{
+	struct viafb_vx855_dma_descr *descr;
+	void *descrpages;
+	dma_addr_t descr_handle;
+	unsigned long flags;
+	int i;
+	struct scatterlist *sgentry;
+	dma_addr_t nextdesc;
+
+	/*
+	 * Get a place to put the descriptors.
+	 */
+	descrpages = dma_alloc_coherent(&global_dev.pdev->dev,
+			nsg*sizeof(struct viafb_vx855_dma_descr),
+			&descr_handle, GFP_KERNEL);
+	if (descrpages == NULL) {
+		dev_err(&global_dev.pdev->dev, "Unable to get descr page.\n");
+		return -ENOMEM;
+	}
+	mutex_lock(&viafb_dma_lock);
+	/*
+	 * Fill them in.
+	 */
+	descr = descrpages;
+	nextdesc = descr_handle + sizeof(struct viafb_vx855_dma_descr);
+	for_each_sg(sg, sgentry, nsg, i) {
+		dma_addr_t paddr = sg_dma_address(sgentry);
+		descr->addr_low = paddr & 0xfffffff0;
+		descr->addr_high = ((u64) paddr >> 32) & 0x0fff;
+		descr->fb_offset = offset;
+		descr->seg_size = sg_dma_len(sgentry) >> 4;
+		descr->tile_mode = 0;
+		descr->next_desc_low = (nextdesc&0xfffffff0) | VIAFB_DMA_MAGIC;
+		descr->next_desc_high = ((u64) nextdesc >> 32) & 0x0fff;
+		descr->pad = 0xffffffff;  /* VIA driver does this */
+		offset += sg_dma_len(sgentry);
+		nextdesc += sizeof(struct viafb_vx855_dma_descr);
+		descr++;
+	}
+	descr[-1].next_desc_low = VIAFB_DMA_FINAL_SEGMENT|VIAFB_DMA_MAGIC;
+	/*
+	 * Program the engine.
+	 */
+	spin_lock_irqsave(&global_dev.reg_lock, flags);
+	init_completion(&viafb_dma_completion);
+	viafb_mmio_write(VDMA_DQWCR0, 0);
+	viafb_mmio_write(VDMA_CSR0, VDMA_C_ENABLE|VDMA_C_DONE);
+	viafb_mmio_write(VDMA_MR0, VDMA_MR_TDIE | VDMA_MR_CHAIN);
+	viafb_mmio_write(VDMA_DPRL0, descr_handle | VIAFB_DMA_MAGIC);
+	viafb_mmio_write(VDMA_DPRH0,
+			(((u64)descr_handle >> 32) & 0x0fff) | 0xf0000);
+	(void) viafb_mmio_read(VDMA_CSR0);
+	viafb_mmio_write(VDMA_CSR0, VDMA_C_ENABLE|VDMA_C_START);
+	spin_unlock_irqrestore(&global_dev.reg_lock, flags);
+	/*
+	 * Now we just wait until the interrupt handler says
+	 * we're done.  Except that, actually, we need to wait a little
+	 * longer: the interrupts seem to jump the gun a little and we
+	 * get corrupted frames sometimes.
+	 */
+	wait_for_completion_timeout(&viafb_dma_completion, 1);
+	msleep(1);
+	if ((viafb_mmio_read(VDMA_CSR0)&VDMA_C_DONE) == 0)
+		printk(KERN_ERR "VIA DMA timeout!\n");
+	/*
+	 * Clean up and we're done.
+	 */
+	viafb_mmio_write(VDMA_CSR0, VDMA_C_DONE);
+	viafb_mmio_write(VDMA_MR0, 0); /* Reset int enable */
+	mutex_unlock(&viafb_dma_lock);
+	dma_free_coherent(&global_dev.pdev->dev,
+			nsg*sizeof(struct viafb_vx855_dma_descr), descrpages,
+			descr_handle);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(viafb_dma_copy_out_sg);
+
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Figure out how big our framebuffer memory is.  Kind of ugly,
+ * but evidently we can't trust the information found in the
+ * fbdev configuration area.
+ */
+static u16 via_function3[] = {
+	CLE266_FUNCTION3, KM400_FUNCTION3, CN400_FUNCTION3, CN700_FUNCTION3,
+	CX700_FUNCTION3, KM800_FUNCTION3, KM890_FUNCTION3, P4M890_FUNCTION3,
+	P4M900_FUNCTION3, VX800_FUNCTION3, VX855_FUNCTION3,
+};
+
+/* Get the BIOS-configured framebuffer size from PCI configuration space
+ * of function 3 in the respective chipset */
+static int viafb_get_fb_size_from_pci(int chip_type)
+{
+	int i;
+	u8 offset = 0;
+	u32 FBSize;
+	u32 VideoMemSize;
+
+	/* search for the "FUNCTION3" device in this chipset */
+	for (i = 0; i < ARRAY_SIZE(via_function3); i++) {
+		struct pci_dev *pdev;
+
+		pdev = pci_get_device(PCI_VENDOR_ID_VIA, via_function3[i],
+				      NULL);
+		if (!pdev)
+			continue;
+
+		DEBUG_MSG(KERN_INFO "Device ID = %x\n", pdev->device);
+
+		switch (pdev->device) {
+		case CLE266_FUNCTION3:
+		case KM400_FUNCTION3:
+			offset = 0xE0;
+			break;
+		case CN400_FUNCTION3:
+		case CN700_FUNCTION3:
+		case CX700_FUNCTION3:
+		case KM800_FUNCTION3:
+		case KM890_FUNCTION3:
+		case P4M890_FUNCTION3:
+		case P4M900_FUNCTION3:
+		case VX800_FUNCTION3:
+		case VX855_FUNCTION3:
+		/*case CN750_FUNCTION3: */
+			offset = 0xA0;
+			break;
+		}
+
+		if (!offset)
+			break;
+
+		pci_read_config_dword(pdev, offset, &FBSize);
+		pci_dev_put(pdev);
+	}
+
+	if (!offset) {
+		printk(KERN_ERR "cannot determine framebuffer size\n");
+		return -EIO;
+	}
+
+	FBSize = FBSize & 0x00007000;
+	DEBUG_MSG(KERN_INFO "FB Size = %x\n", FBSize);
+
+	if (chip_type < UNICHROME_CX700) {
+		switch (FBSize) {
+		case 0x00004000:
+			VideoMemSize = (16 << 20);	/*16M */
+			break;
+
+		case 0x00005000:
+			VideoMemSize = (32 << 20);	/*32M */
+			break;
+
+		case 0x00006000:
+			VideoMemSize = (64 << 20);	/*64M */
+			break;
+
+		default:
+			VideoMemSize = (32 << 20);	/*32M */
+			break;
+		}
+	} else {
+		switch (FBSize) {
+		case 0x00001000:
+			VideoMemSize = (8 << 20);	/*8M */
+			break;
+
+		case 0x00002000:
+			VideoMemSize = (16 << 20);	/*16M */
+			break;
+
+		case 0x00003000:
+			VideoMemSize = (32 << 20);	/*32M */
+			break;
+
+		case 0x00004000:
+			VideoMemSize = (64 << 20);	/*64M */
+			break;
+
+		case 0x00005000:
+			VideoMemSize = (128 << 20);	/*128M */
+			break;
+
+		case 0x00006000:
+			VideoMemSize = (256 << 20);	/*256M */
+			break;
+
+		case 0x00007000:	/* Only on VX855/875 */
+			VideoMemSize = (512 << 20);	/*512M */
+			break;
+
+		default:
+			VideoMemSize = (32 << 20);	/*32M */
+			break;
+		}
+	}
+
+	return VideoMemSize;
+}
+
+
+/*
+ * Figure out and map our MMIO regions.
+ */
+static int __devinit via_pci_setup_mmio(struct viafb_dev *vdev)
+{
+	int ret;
+	/*
+	 * Hook up to the device registers.  Note that we soldier
+	 * on if it fails; the framebuffer can operate (without
+	 * acceleration) without this region.
+	 */
+	vdev->engine_start = pci_resource_start(vdev->pdev, 1);
+	vdev->engine_len = pci_resource_len(vdev->pdev, 1);
+	vdev->engine_mmio = ioremap_nocache(vdev->engine_start,
+			vdev->engine_len);
+	if (vdev->engine_mmio == NULL)
+		dev_err(&vdev->pdev->dev,
+				"Unable to map engine MMIO; operation will be "
+				"slow and crippled.\n");
+	/*
+	 * Map in framebuffer memory.  For now, failure here is
+	 * fatal.  Unfortunately, in the absence of significant
+	 * vmalloc space, failure here is also entirely plausible.
+	 * Eventually we want to move away from mapping this
+	 * entire region.
+	 */
+	vdev->fbmem_start = pci_resource_start(vdev->pdev, 0);
+	ret = vdev->fbmem_len = viafb_get_fb_size_from_pci(vdev->chip_type);
+	if (ret < 0)
+		goto out_unmap;
+	vdev->fbmem = ioremap_nocache(vdev->fbmem_start, vdev->fbmem_len);
+	if (vdev->fbmem == NULL) {
+		ret = -ENOMEM;
+		goto out_unmap;
+	}
+	return 0;
+out_unmap:
+	iounmap(vdev->engine_mmio);
+	return ret;
+}
+
+static void __devexit via_pci_teardown_mmio(struct viafb_dev *vdev)
+{
+	iounmap(vdev->fbmem);
+	iounmap(vdev->engine_mmio);
+}
+
+/*
+ * Create our subsidiary devices.
+ */
+static struct viafb_subdev_info {
+	char *name;
+	struct platform_device *platdev;
+} viafb_subdevs[] = {
+	{
+		.name = "viafb-gpio",
+	},
+	{
+		.name = "viafb-i2c",
+	}
+};
+#define N_SUBDEVS ARRAY_SIZE(viafb_subdevs)
+
+static int __devinit via_create_subdev(struct viafb_dev *vdev,
+		struct viafb_subdev_info *info)
+{
+	int ret;
+
+	info->platdev = platform_device_alloc(info->name, -1);
+	if (!info->platdev) {
+		dev_err(&vdev->pdev->dev, "Unable to allocate pdev %s\n",
+			info->name);
+		return -ENOMEM;
+	}
+	info->platdev->dev.parent = &vdev->pdev->dev;
+	info->platdev->dev.platform_data = vdev;
+	ret = platform_device_add(info->platdev);
+	if (ret) {
+		dev_err(&vdev->pdev->dev, "Unable to add pdev %s\n",
+				info->name);
+		platform_device_put(info->platdev);
+		info->platdev = NULL;
+	}
+	return ret;
+}
+
+static int __devinit via_setup_subdevs(struct viafb_dev *vdev)
+{
+	int i;
+
+	/*
+	 * Ignore return values.  Even if some of the devices
+	 * fail to be created, we'll still be able to use some
+	 * of the rest.
+	 */
+	for (i = 0; i < N_SUBDEVS; i++)
+		via_create_subdev(vdev, viafb_subdevs + i);
+	return 0;
+}
+
+static void __devexit via_teardown_subdevs(void)
+{
+	int i;
+
+	for (i = 0; i < N_SUBDEVS; i++)
+		if (viafb_subdevs[i].platdev) {
+			viafb_subdevs[i].platdev->dev.platform_data = NULL;
+			platform_device_unregister(viafb_subdevs[i].platdev);
+		}
+}
+
+
+static int __devinit via_pci_probe(struct pci_dev *pdev,
+		const struct pci_device_id *ent)
+{
+	int ret;
+
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
+	/*
+	 * Global device initialization.
+	 */
+	memset(&global_dev, 0, sizeof(global_dev));
+	global_dev.pdev = pdev;
+	global_dev.chip_type = ent->driver_data;
+	global_dev.port_cfg = adap_configs;
+	spin_lock_init(&global_dev.reg_lock);
+	ret = via_pci_setup_mmio(&global_dev);
+	if (ret)
+		goto out_disable;
+	/*
+	 * Set up interrupts and create our subdevices.  Continue even if
+	 * some things fail.
+	 */
+	viafb_int_init();
+	via_setup_subdevs(&global_dev);
+	/*
+	 * Set up the framebuffer device
+	 */
+	ret = via_fb_pci_probe(&global_dev);
+	if (ret)
+		goto out_subdevs;
+	return 0;
+
+out_subdevs:
+	via_teardown_subdevs();
+	via_pci_teardown_mmio(&global_dev);
+out_disable:
+	pci_disable_device(pdev);
+	return ret;
+}
+
+static void __devexit via_pci_remove(struct pci_dev *pdev)
+{
+	via_teardown_subdevs();
+	via_fb_pci_remove(pdev);
+	via_pci_teardown_mmio(&global_dev);
+	pci_disable_device(pdev);
+}
+
+
+static struct pci_device_id via_pci_table[] __devinitdata = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CLE266_DID),
+	  .driver_data = UNICHROME_CLE266 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_PM800_DID),
+	  .driver_data = UNICHROME_PM800 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K400_DID),
+	  .driver_data = UNICHROME_K400 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K800_DID),
+	  .driver_data = UNICHROME_K800 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M890_DID),
+	  .driver_data = UNICHROME_CN700 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K8M890_DID),
+	  .driver_data = UNICHROME_K8M890 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CX700_DID),
+	  .driver_data = UNICHROME_CX700 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M900_DID),
+	  .driver_data = UNICHROME_P4M900 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CN750_DID),
+	  .driver_data = UNICHROME_CN750 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX800_DID),
+	  .driver_data = UNICHROME_VX800 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX855_DID),
+	  .driver_data = UNICHROME_VX855 },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, via_pci_table);
+
+static struct pci_driver via_driver = {
+	.name		= "viafb",
+	.id_table	= via_pci_table,
+	.probe		= via_pci_probe,
+	.remove		= __devexit_p(via_pci_remove),
+};
+
+static int __init via_core_init(void)
+{
+	int ret;
+
+	ret = viafb_init();
+	if (ret)
+		return ret;
+	viafb_i2c_init();
+	viafb_gpio_init();
+	return pci_register_driver(&via_driver);
+}
+
+static void __exit via_core_exit(void)
+{
+	pci_unregister_driver(&via_driver);
+	viafb_gpio_exit();
+	viafb_i2c_exit();
+	viafb_exit();
+}
+
+module_init(via_core_init);
+module_exit(via_core_exit);
diff --git a/drivers/video/via/via-gpio.c b/drivers/video/via/via-gpio.c
new file mode 100644
index 00000000000..595516aea69
--- /dev/null
+++ b/drivers/video/via/via-gpio.c
@@ -0,0 +1,285 @@
+/*
+ * Support for viafb GPIO ports.
+ *
+ * Copyright 2009 Jonathan Corbet <corbet@lwn.net>
+ * Distributable under version 2 of the GNU General Public License.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/via-core.h>
+#include <linux/via-gpio.h>
+
+/*
+ * The ports we know about.  Note that the port-25 gpios are not
+ * mentioned in the datasheet.
+ */
+
+struct viafb_gpio {
+	char *vg_name;	/* Data sheet name */
+	u16 vg_io_port;
+	u8  vg_port_index;
+	int  vg_mask_shift;
+};
+
+static struct viafb_gpio viafb_all_gpios[] = {
+	{
+		.vg_name = "VGPIO0",  /* Guess - not in datasheet */
+		.vg_io_port = VIASR,
+		.vg_port_index = 0x25,
+		.vg_mask_shift = 1
+	},
+	{
+		.vg_name = "VGPIO1",
+		.vg_io_port = VIASR,
+		.vg_port_index = 0x25,
+		.vg_mask_shift = 0
+	},
+	{
+		.vg_name = "VGPIO2",  /* aka DISPCLKI0 */
+		.vg_io_port = VIASR,
+		.vg_port_index = 0x2c,
+		.vg_mask_shift = 1
+	},
+	{
+		.vg_name = "VGPIO3",  /* aka DISPCLKO0 */
+		.vg_io_port = VIASR,
+		.vg_port_index = 0x2c,
+		.vg_mask_shift = 0
+	},
+	{
+		.vg_name = "VGPIO4",  /* DISPCLKI1 */
+		.vg_io_port = VIASR,
+		.vg_port_index = 0x3d,
+		.vg_mask_shift = 1
+	},
+	{
+		.vg_name = "VGPIO5",  /* DISPCLKO1 */
+		.vg_io_port = VIASR,
+		.vg_port_index = 0x3d,
+		.vg_mask_shift = 0
+	},
+};
+
+#define VIAFB_NUM_GPIOS ARRAY_SIZE(viafb_all_gpios)
+
+/*
+ * This structure controls the active GPIOs, which may be a subset
+ * of those which are known.
+ */
+
+struct viafb_gpio_cfg {
+	struct gpio_chip gpio_chip;
+	struct viafb_dev *vdev;
+	struct viafb_gpio *active_gpios[VIAFB_NUM_GPIOS];
+	char *gpio_names[VIAFB_NUM_GPIOS];
+};
+
+/*
+ * GPIO access functions
+ */
+static void via_gpio_set(struct gpio_chip *chip, unsigned int nr,
+			 int value)
+{
+	struct viafb_gpio_cfg *cfg = container_of(chip,
+						  struct viafb_gpio_cfg,
+						  gpio_chip);
+	u8 reg;
+	struct viafb_gpio *gpio;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cfg->vdev->reg_lock, flags);
+	gpio = cfg->active_gpios[nr];
+	reg = via_read_reg(VIASR, gpio->vg_port_index);
+	reg |= 0x40 << gpio->vg_mask_shift;  /* output enable */
+	if (value)
+		reg |= 0x10 << gpio->vg_mask_shift;
+	else
+		reg &= ~(0x10 << gpio->vg_mask_shift);
+	via_write_reg(VIASR, gpio->vg_port_index, reg);
+	spin_unlock_irqrestore(&cfg->vdev->reg_lock, flags);
+}
+
+static int via_gpio_dir_out(struct gpio_chip *chip, unsigned int nr,
+			    int value)
+{
+	via_gpio_set(chip, nr, value);
+	return 0;
+}
+
+/*
+ * Set the input direction.  I'm not sure this is right; we should
+ * be able to do input without disabling output.
+ */
+static int via_gpio_dir_input(struct gpio_chip *chip, unsigned int nr)
+{
+	struct viafb_gpio_cfg *cfg = container_of(chip,
+						  struct viafb_gpio_cfg,
+						  gpio_chip);
+	struct viafb_gpio *gpio;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cfg->vdev->reg_lock, flags);
+	gpio = cfg->active_gpios[nr];
+	via_write_reg_mask(VIASR, gpio->vg_port_index, 0,
+			0x40 << gpio->vg_mask_shift);
+	spin_unlock_irqrestore(&cfg->vdev->reg_lock, flags);
+	return 0;
+}
+
+static int via_gpio_get(struct gpio_chip *chip, unsigned int nr)
+{
+	struct viafb_gpio_cfg *cfg = container_of(chip,
+						  struct viafb_gpio_cfg,
+						  gpio_chip);
+	u8 reg;
+	struct viafb_gpio *gpio;
+	unsigned long flags;
+
+	spin_lock_irqsave(&cfg->vdev->reg_lock, flags);
+	gpio = cfg->active_gpios[nr];
+	reg = via_read_reg(VIASR, gpio->vg_port_index);
+	spin_unlock_irqrestore(&cfg->vdev->reg_lock, flags);
+	return reg & (0x04 << gpio->vg_mask_shift);
+}
+
+
+static struct viafb_gpio_cfg gpio_config = {
+	.gpio_chip = {
+		.label = "VIAFB onboard GPIO",
+		.owner = THIS_MODULE,
+		.direction_output = via_gpio_dir_out,
+		.set = via_gpio_set,
+		.direction_input = via_gpio_dir_input,
+		.get = via_gpio_get,
+		.base = -1,
+		.ngpio = 0,
+		.can_sleep = 0
+	}
+};
+
+/*
+ * Manage the software enable bit.
+ */
+static void viafb_gpio_enable(struct viafb_gpio *gpio)
+{
+	via_write_reg_mask(VIASR, gpio->vg_port_index, 0x02, 0x02);
+}
+
+static void viafb_gpio_disable(struct viafb_gpio *gpio)
+{
+	via_write_reg_mask(VIASR, gpio->vg_port_index, 0, 0x02);
+}
+
+/*
+ * Look up a specific gpio and return the number it was assigned.
+ */
+int viafb_gpio_lookup(const char *name)
+{
+	int i;
+
+	for (i = 0; i < gpio_config.gpio_chip.ngpio; i++)
+		if (!strcmp(name, gpio_config.active_gpios[i]->vg_name))
+			return gpio_config.gpio_chip.base + i;
+	return -1;
+}
+EXPORT_SYMBOL_GPL(viafb_gpio_lookup);
+
+/*
+ * Platform device stuff.
+ */
+static __devinit int viafb_gpio_probe(struct platform_device *platdev)
+{
+	struct viafb_dev *vdev = platdev->dev.platform_data;
+	struct via_port_cfg *port_cfg = vdev->port_cfg;
+	int i, ngpio = 0, ret;
+	struct viafb_gpio *gpio;
+	unsigned long flags;
+
+	/*
+	 * Set up entries for all GPIOs which have been configured to
+	 * operate as such (as opposed to as i2c ports).
+	 */
+	for (i = 0; i < VIAFB_NUM_PORTS; i++) {
+		if (port_cfg[i].mode != VIA_MODE_GPIO)
+			continue;
+		for (gpio = viafb_all_gpios;
+		     gpio < viafb_all_gpios + VIAFB_NUM_GPIOS; gpio++)
+			if (gpio->vg_port_index == port_cfg[i].ioport_index) {
+				gpio_config.active_gpios[ngpio] = gpio;
+				gpio_config.gpio_names[ngpio] = gpio->vg_name;
+				ngpio++;
+			}
+	}
+	gpio_config.gpio_chip.ngpio = ngpio;
+	gpio_config.gpio_chip.names = gpio_config.gpio_names;
+	gpio_config.vdev = vdev;
+	if (ngpio == 0) {
+		printk(KERN_INFO "viafb: no GPIOs configured\n");
+		return 0;
+	}
+	/*
+	 * Enable the ports.  They come in pairs, with a single
+	 * enable bit for both.
+	 */
+	spin_lock_irqsave(&gpio_config.vdev->reg_lock, flags);
+	for (i = 0; i < ngpio; i += 2)
+		viafb_gpio_enable(gpio_config.active_gpios[i]);
+	spin_unlock_irqrestore(&gpio_config.vdev->reg_lock, flags);
+	/*
+	 * Get registered.
+	 */
+	gpio_config.gpio_chip.base = -1;  /* Dynamic */
+	ret = gpiochip_add(&gpio_config.gpio_chip);
+	if (ret) {
+		printk(KERN_ERR "viafb: failed to add gpios (%d)\n", ret);
+		gpio_config.gpio_chip.ngpio = 0;
+	}
+	return ret;
+}
+
+
+static int viafb_gpio_remove(struct platform_device *platdev)
+{
+	unsigned long flags;
+	int ret = 0, i;
+
+	/*
+	 * Get unregistered.
+	 */
+	if (gpio_config.gpio_chip.ngpio > 0) {
+		ret = gpiochip_remove(&gpio_config.gpio_chip);
+		if (ret) { /* Somebody still using it? */
+			printk(KERN_ERR "Viafb: GPIO remove failed\n");
+			return ret;
+		}
+	}
+	/*
+	 * Disable the ports.
+	 */
+	spin_lock_irqsave(&gpio_config.vdev->reg_lock, flags);
+	for (i = 0; i < gpio_config.gpio_chip.ngpio; i += 2)
+		viafb_gpio_disable(gpio_config.active_gpios[i]);
+	gpio_config.gpio_chip.ngpio = 0;
+	spin_unlock_irqrestore(&gpio_config.vdev->reg_lock, flags);
+	return ret;
+}
+
+static struct platform_driver via_gpio_driver = {
+	.driver = {
+		.name = "viafb-gpio",
+	},
+	.probe = viafb_gpio_probe,
+	.remove = viafb_gpio_remove,
+};
+
+int viafb_gpio_init(void)
+{
+	return platform_driver_register(&via_gpio_driver);
+}
+
+void viafb_gpio_exit(void)
+{
+	platform_driver_unregister(&via_gpio_driver);
+}
diff --git a/drivers/video/via/via_i2c.c b/drivers/video/via/via_i2c.c
index 15543e96824..da9e4ca94b1 100644
--- a/drivers/video/via/via_i2c.c
+++ b/drivers/video/via/via_i2c.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
  * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
 
  * This program is free software; you can redistribute it and/or
@@ -19,77 +19,106 @@
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
-#include "global.h"
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/via-core.h>
+#include <linux/via_i2c.h>
+
+/*
+ * There can only be one set of these, so there's no point in having
+ * them be dynamically allocated...
+ */
+#define VIAFB_NUM_I2C		5
+static struct via_i2c_stuff via_i2c_par[VIAFB_NUM_I2C];
+struct viafb_dev *i2c_vdev;  /* Passed in from core */
 
 static void via_i2c_setscl(void *data, int state)
 {
 	u8 val;
-	struct via_i2c_stuff *via_i2c_chan = (struct via_i2c_stuff *)data;
+	struct via_port_cfg *adap_data = data;
+	unsigned long flags;
 
-	val = viafb_read_reg(VIASR, via_i2c_chan->i2c_port) & 0xF0;
+	spin_lock_irqsave(&i2c_vdev->reg_lock, flags);
+	val = via_read_reg(adap_data->io_port, adap_data->ioport_index) & 0xF0;
 	if (state)
 		val |= 0x20;
 	else
 		val &= ~0x20;
-	switch (via_i2c_chan->i2c_port) {
-	case I2CPORTINDEX:
+	switch (adap_data->type) {
+	case VIA_PORT_I2C:
 		val |= 0x01;
 		break;
-	case GPIOPORTINDEX:
+	case VIA_PORT_GPIO:
 		val |= 0x80;
 		break;
 	default:
-		DEBUG_MSG("via_i2c: specify wrong i2c port.\n");
+		printk(KERN_ERR "viafb_i2c: specify wrong i2c type.\n");
 	}
-	viafb_write_reg(via_i2c_chan->i2c_port, VIASR, val);
+	via_write_reg(adap_data->io_port, adap_data->ioport_index, val);
+	spin_unlock_irqrestore(&i2c_vdev->reg_lock, flags);
 }
 
 static int via_i2c_getscl(void *data)
 {
-	struct via_i2c_stuff *via_i2c_chan = (struct via_i2c_stuff *)data;
+	struct via_port_cfg *adap_data = data;
+	unsigned long flags;
+	int ret = 0;
 
-	if (viafb_read_reg(VIASR, via_i2c_chan->i2c_port) & 0x08)
-		return 1;
-	return 0;
+	spin_lock_irqsave(&i2c_vdev->reg_lock, flags);
+	if (via_read_reg(adap_data->io_port, adap_data->ioport_index) & 0x08)
+		ret = 1;
+	spin_unlock_irqrestore(&i2c_vdev->reg_lock, flags);
+	return ret;
 }
 
 static int via_i2c_getsda(void *data)
 {
-	struct via_i2c_stuff *via_i2c_chan = (struct via_i2c_stuff *)data;
+	struct via_port_cfg *adap_data = data;
+	unsigned long flags;
+	int ret = 0;
 
-	if (viafb_read_reg(VIASR, via_i2c_chan->i2c_port) & 0x04)
-		return 1;
-	return 0;
+	spin_lock_irqsave(&i2c_vdev->reg_lock, flags);
+	if (via_read_reg(adap_data->io_port, adap_data->ioport_index) & 0x04)
+		ret = 1;
+	spin_unlock_irqrestore(&i2c_vdev->reg_lock, flags);
+	return ret;
 }
 
 static void via_i2c_setsda(void *data, int state)
 {
 	u8 val;
-	struct via_i2c_stuff *via_i2c_chan = (struct via_i2c_stuff *)data;
+	struct via_port_cfg *adap_data = data;
+	unsigned long flags;
 
-	val = viafb_read_reg(VIASR, via_i2c_chan->i2c_port) & 0xF0;
+	spin_lock_irqsave(&i2c_vdev->reg_lock, flags);
+	val = via_read_reg(adap_data->io_port, adap_data->ioport_index) & 0xF0;
 	if (state)
 		val |= 0x10;
 	else
 		val &= ~0x10;
-	switch (via_i2c_chan->i2c_port) {
-	case I2CPORTINDEX:
+	switch (adap_data->type) {
+	case VIA_PORT_I2C:
 		val |= 0x01;
 		break;
-	case GPIOPORTINDEX:
+	case VIA_PORT_GPIO:
 		val |= 0x40;
 		break;
 	default:
-		DEBUG_MSG("via_i2c: specify wrong i2c port.\n");
+		printk(KERN_ERR "viafb_i2c: specify wrong i2c type.\n");
 	}
-	viafb_write_reg(via_i2c_chan->i2c_port, VIASR, val);
+	via_write_reg(adap_data->io_port, adap_data->ioport_index, val);
+	spin_unlock_irqrestore(&i2c_vdev->reg_lock, flags);
 }
 
-int viafb_i2c_readbyte(u8 slave_addr, u8 index, u8 *pdata)
+int viafb_i2c_readbyte(u8 adap, u8 slave_addr, u8 index, u8 *pdata)
 {
 	u8 mm1[] = {0x00};
 	struct i2c_msg msgs[2];
 
+	if (!via_i2c_par[adap].is_active)
+		return -ENODEV;
 	*pdata = 0;
 	msgs[0].flags = 0;
 	msgs[1].flags = I2C_M_RD;
@@ -97,81 +126,144 @@ int viafb_i2c_readbyte(u8 slave_addr, u8 index, u8 *pdata)
 	mm1[0] = index;
 	msgs[0].len = 1; msgs[1].len = 1;
 	msgs[0].buf = mm1; msgs[1].buf = pdata;
-	i2c_transfer(&viaparinfo->shared->i2c_stuff.adapter, msgs, 2);
-
-	return 0;
+	return i2c_transfer(&via_i2c_par[adap].adapter, msgs, 2);
 }
 
-int viafb_i2c_writebyte(u8 slave_addr, u8 index, u8 data)
+int viafb_i2c_writebyte(u8 adap, u8 slave_addr, u8 index, u8 data)
 {
 	u8 msg[2] = { index, data };
 	struct i2c_msg msgs;
 
+	if (!via_i2c_par[adap].is_active)
+		return -ENODEV;
 	msgs.flags = 0;
 	msgs.addr = slave_addr / 2;
 	msgs.len = 2;
 	msgs.buf = msg;
-	return i2c_transfer(&viaparinfo->shared->i2c_stuff.adapter, &msgs, 1);
+	return i2c_transfer(&via_i2c_par[adap].adapter, &msgs, 1);
 }
 
-int viafb_i2c_readbytes(u8 slave_addr, u8 index, u8 *buff, int buff_len)
+int viafb_i2c_readbytes(u8 adap, u8 slave_addr, u8 index, u8 *buff, int buff_len)
 {
 	u8 mm1[] = {0x00};
 	struct i2c_msg msgs[2];
 
+	if (!via_i2c_par[adap].is_active)
+		return -ENODEV;
 	msgs[0].flags = 0;
 	msgs[1].flags = I2C_M_RD;
 	msgs[0].addr = msgs[1].addr = slave_addr / 2;
 	mm1[0] = index;
 	msgs[0].len = 1; msgs[1].len = buff_len;
 	msgs[0].buf = mm1; msgs[1].buf = buff;
-	i2c_transfer(&viaparinfo->shared->i2c_stuff.adapter, msgs, 2);
-	return 0;
+	return i2c_transfer(&via_i2c_par[adap].adapter, msgs, 2);
 }
 
-int viafb_create_i2c_bus(void *viapar)
+/*
+ * Allow other viafb subdevices to look up a specific adapter
+ * by port name.
+ */
+struct i2c_adapter *viafb_find_i2c_adapter(enum viafb_i2c_adap which)
 {
-	int ret;
-	struct via_i2c_stuff *i2c_stuff =
-		&((struct viafb_par *)viapar)->shared->i2c_stuff;
-
-	strcpy(i2c_stuff->adapter.name, "via_i2c");
-	i2c_stuff->i2c_port = 0x0;
-	i2c_stuff->adapter.owner = THIS_MODULE;
-	i2c_stuff->adapter.id = 0x01FFFF;
-	i2c_stuff->adapter.class = 0;
-	i2c_stuff->adapter.algo_data = &i2c_stuff->algo;
-	i2c_stuff->adapter.dev.parent = NULL;
-	i2c_stuff->algo.setsda = via_i2c_setsda;
-	i2c_stuff->algo.setscl = via_i2c_setscl;
-	i2c_stuff->algo.getsda = via_i2c_getsda;
-	i2c_stuff->algo.getscl = via_i2c_getscl;
-	i2c_stuff->algo.udelay = 40;
-	i2c_stuff->algo.timeout = 20;
-	i2c_stuff->algo.data = i2c_stuff;
-
-	i2c_set_adapdata(&i2c_stuff->adapter, i2c_stuff);
+	struct via_i2c_stuff *stuff = &via_i2c_par[which];
 
-	/* Raise SCL and SDA */
-	i2c_stuff->i2c_port = I2CPORTINDEX;
-	via_i2c_setsda(i2c_stuff, 1);
-	via_i2c_setscl(i2c_stuff, 1);
+	return &stuff->adapter;
+}
+EXPORT_SYMBOL_GPL(viafb_find_i2c_adapter);
 
-	i2c_stuff->i2c_port = GPIOPORTINDEX;
-	via_i2c_setsda(i2c_stuff, 1);
-	via_i2c_setscl(i2c_stuff, 1);
-	udelay(20);
 
-	ret = i2c_bit_add_bus(&i2c_stuff->adapter);
-	if (ret == 0)
-		DEBUG_MSG("I2C bus %s registered.\n", i2c_stuff->adapter.name);
+static int create_i2c_bus(struct i2c_adapter *adapter,
+			  struct i2c_algo_bit_data *algo,
+			  struct via_port_cfg *adap_cfg,
+			  struct pci_dev *pdev)
+{
+	algo->setsda = via_i2c_setsda;
+	algo->setscl = via_i2c_setscl;
+	algo->getsda = via_i2c_getsda;
+	algo->getscl = via_i2c_getscl;
+	algo->udelay = 40;
+	algo->timeout = 20;
+	algo->data = adap_cfg;
+
+	sprintf(adapter->name, "viafb i2c io_port idx 0x%02x",
+		adap_cfg->ioport_index);
+	adapter->owner = THIS_MODULE;
+	adapter->id = 0x01FFFF;
+	adapter->class = I2C_CLASS_DDC;
+	adapter->algo_data = algo;
+	if (pdev)
+		adapter->dev.parent = &pdev->dev;
 	else
-		DEBUG_MSG("Failed to register I2C bus %s.\n",
-			i2c_stuff->adapter.name);
-	return ret;
+		adapter->dev.parent = NULL;
+	/* i2c_set_adapdata(adapter, adap_cfg); */
+
+	/* Raise SCL and SDA */
+	via_i2c_setsda(adap_cfg, 1);
+	via_i2c_setscl(adap_cfg, 1);
+	udelay(20);
+
+	return i2c_bit_add_bus(adapter);
+}
+
+static int viafb_i2c_probe(struct platform_device *platdev)
+{
+	int i, ret;
+	struct via_port_cfg *configs;
+
+	i2c_vdev = platdev->dev.platform_data;
+	configs = i2c_vdev->port_cfg;
+
+	for (i = 0; i < VIAFB_NUM_PORTS; i++) {
+		struct via_port_cfg *adap_cfg = configs++;
+		struct via_i2c_stuff *i2c_stuff = &via_i2c_par[i];
+
+		i2c_stuff->is_active = 0;
+		if (adap_cfg->type == 0 || adap_cfg->mode != VIA_MODE_I2C)
+			continue;
+		ret = create_i2c_bus(&i2c_stuff->adapter,
+				     &i2c_stuff->algo, adap_cfg,
+				NULL); /* FIXME: PCIDEV */
+		if (ret < 0) {
+			printk(KERN_ERR "viafb: cannot create i2c bus %u:%d\n",
+				i, ret);
+			continue;  /* Still try to make the rest */
+		}
+		i2c_stuff->is_active = 1;
+	}
+
+	return 0;
+}
+
+static int viafb_i2c_remove(struct platform_device *platdev)
+{
+	int i;
+
+	for (i = 0; i < VIAFB_NUM_PORTS; i++) {
+		struct via_i2c_stuff *i2c_stuff = &via_i2c_par[i];
+		/*
+		 * Only remove those entries in the array that we've
+		 * actually used (and thus initialized algo_data)
+		 */
+		if (i2c_stuff->is_active)
+			i2c_del_adapter(&i2c_stuff->adapter);
+	}
+	return 0;
+}
+
+static struct platform_driver via_i2c_driver = {
+	.driver = {
+		.name = "viafb-i2c",
+	},
+	.probe = viafb_i2c_probe,
+	.remove = viafb_i2c_remove,
+};
+
+int viafb_i2c_init(void)
+{
+	return platform_driver_register(&via_i2c_driver);
 }
 
-void viafb_delete_i2c_buss(void *par)
+void viafb_i2c_exit(void)
 {
-	i2c_del_adapter(&((struct viafb_par *)par)->shared->i2c_stuff.adapter);
+	platform_driver_unregister(&via_i2c_driver);
 }
diff --git a/drivers/video/via/via_modesetting.c b/drivers/video/via/via_modesetting.c
new file mode 100644
index 00000000000..3cddcff88ab
--- /dev/null
+++ b/drivers/video/via/via_modesetting.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+ * Copyright 2010 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
+ * the implied warranty of MERCHANTABILITY or FITNESS FOR
+ * A PARTICULAR PURPOSE.See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+/*
+ * basic modesetting functions
+ */
+
+#include <linux/kernel.h>
+#include <linux/via-core.h>
+#include "via_modesetting.h"
+#include "share.h"
+#include "debug.h"
+
+void via_set_primary_address(u32 addr)
+{
+	DEBUG_MSG(KERN_DEBUG "via_set_primary_address(0x%08X)\n", addr);
+	via_write_reg(VIACR, 0x0D, addr & 0xFF);
+	via_write_reg(VIACR, 0x0C, (addr >> 8) & 0xFF);
+	via_write_reg(VIACR, 0x34, (addr >> 16) & 0xFF);
+	via_write_reg_mask(VIACR, 0x48, (addr >> 24) & 0x1F, 0x1F);
+}
+
+void via_set_secondary_address(u32 addr)
+{
+	DEBUG_MSG(KERN_DEBUG "via_set_secondary_address(0x%08X)\n", addr);
+	/* secondary display supports only quadword aligned memory */
+	via_write_reg_mask(VIACR, 0x62, (addr >> 2) & 0xFE, 0xFE);
+	via_write_reg(VIACR, 0x63, (addr >> 10) & 0xFF);
+	via_write_reg(VIACR, 0x64, (addr >> 18) & 0xFF);
+	via_write_reg_mask(VIACR, 0xA3, (addr >> 26) & 0x07, 0x07);
+}
+
+void via_set_primary_pitch(u32 pitch)
+{
+	DEBUG_MSG(KERN_DEBUG "via_set_primary_pitch(0x%08X)\n", pitch);
+	/* spec does not say that first adapter skips 3 bits but old
+	 * code did it and seems to be reasonable in analogy to 2nd adapter
+	 */
+	pitch = pitch >> 3;
+	via_write_reg(VIACR, 0x13, pitch & 0xFF);
+	via_write_reg_mask(VIACR, 0x35, (pitch >> (8 - 5)) & 0xE0, 0xE0);
+}
+
+void via_set_secondary_pitch(u32 pitch)
+{
+	DEBUG_MSG(KERN_DEBUG "via_set_secondary_pitch(0x%08X)\n", pitch);
+	pitch = pitch >> 3;
+	via_write_reg(VIACR, 0x66, pitch & 0xFF);
+	via_write_reg_mask(VIACR, 0x67, (pitch >> 8) & 0x03, 0x03);
+	via_write_reg_mask(VIACR, 0x71, (pitch >> (10 - 7)) & 0x80, 0x80);
+}
+
+void via_set_primary_color_depth(u8 depth)
+{
+	u8 value;
+
+	DEBUG_MSG(KERN_DEBUG "via_set_primary_color_depth(%d)\n", depth);
+	switch (depth) {
+	case 8:
+		value = 0x00;
+		break;
+	case 15:
+		value = 0x04;
+		break;
+	case 16:
+		value = 0x14;
+		break;
+	case 24:
+		value = 0x0C;
+		break;
+	case 30:
+		value = 0x08;
+		break;
+	default:
+		printk(KERN_WARNING "via_set_primary_color_depth: "
+			"Unsupported depth: %d\n", depth);
+		return;
+	}
+
+	via_write_reg_mask(VIASR, 0x15, value, 0x1C);
+}
+
+void via_set_secondary_color_depth(u8 depth)
+{
+	u8 value;
+
+	DEBUG_MSG(KERN_DEBUG "via_set_secondary_color_depth(%d)\n", depth);
+	switch (depth) {
+	case 8:
+		value = 0x00;
+		break;
+	case 16:
+		value = 0x40;
+		break;
+	case 24:
+		value = 0xC0;
+		break;
+	case 30:
+		value = 0x80;
+		break;
+	default:
+		printk(KERN_WARNING "via_set_secondary_color_depth: "
+			"Unsupported depth: %d\n", depth);
+		return;
+	}
+
+	via_write_reg_mask(VIACR, 0x67, value, 0xC0);
+}
diff --git a/drivers/video/via/via_i2c.h b/drivers/video/via/via_modesetting.h
index 3a13242a315..ae35cfdeb37 100644
--- a/drivers/video/via/via_i2c.h
+++ b/drivers/video/via/via_modesetting.h
@@ -1,46 +1,38 @@
 /*
  * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
  * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
-
+ * Copyright 2010 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public
  * License as published by the Free Software Foundation;
  * either version 2, or (at your option) any later version.
-
+ *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
  * the implied warranty of MERCHANTABILITY or FITNESS FOR
  * A PARTICULAR PURPOSE.See the GNU General Public License
  * for more details.
-
+ *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc.,
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
-#ifndef __VIA_I2C_H__
-#define __VIA_I2C_H__
+/*
+ * basic modesetting functions
+ */
 
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
+#ifndef __VIA_MODESETTING_H__
+#define __VIA_MODESETTING_H__
 
-struct via_i2c_stuff {
-	u16 i2c_port;			/* GPIO or I2C port */
-	struct i2c_adapter adapter;
-	struct i2c_algo_bit_data algo;
-};
+#include <linux/types.h>
 
-#define I2CPORT           0x3c4
-#define I2CPORTINDEX      0x31
-#define GPIOPORT          0x3C4
-#define GPIOPORTINDEX     0x2C
-#define I2C_BUS             1
-#define GPIO_BUS            2
-#define DELAYPORT           0x3C3
+void via_set_primary_address(u32 addr);
+void via_set_secondary_address(u32 addr);
+void via_set_primary_pitch(u32 pitch);
+void via_set_secondary_pitch(u32 pitch);
+void via_set_primary_color_depth(u8 depth);
+void via_set_secondary_color_depth(u8 depth);
 
-int viafb_i2c_readbyte(u8 slave_addr, u8 index, u8 *pdata);
-int viafb_i2c_writebyte(u8 slave_addr, u8 index, u8 data);
-int viafb_i2c_readbytes(u8 slave_addr, u8 index, u8 *buff, int buff_len);
-int viafb_create_i2c_bus(void *par);
-void viafb_delete_i2c_buss(void *par);
-#endif /* __VIA_I2C_H__ */
+#endif /* __VIA_MODESETTING_H__ */
diff --git a/drivers/video/via/via_utility.c b/drivers/video/via/via_utility.c
index aefdeeec89b..d05ccb62b55 100644
--- a/drivers/video/via/via_utility.c
+++ b/drivers/video/via/via_utility.c
@@ -19,6 +19,7 @@
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
+#include <linux/via-core.h>
 #include "global.h"
 
 void viafb_get_device_support_state(u32 *support_state)
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 777b38a06d4..2bc40e682f9 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
  * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
 
  * This program is free software; you can redistribute it and/or
@@ -23,8 +23,9 @@
 #include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
-#define _MASTER_FILE
+#include <linux/via-core.h>
 
+#define _MASTER_FILE
 #include "global.h"
 
 static char *viafb_name = "Via";
@@ -221,7 +222,7 @@ static int viafb_check_var(struct fb_var_screeninfo *var,
 	/* Adjust var according to our driver's own table */
 	viafb_fill_var_timing_info(var, viafb_refresh, vmode_entry);
 	if (info->var.accel_flags & FB_ACCELF_TEXT &&
-		!ppar->shared->engine_mmio)
+		!ppar->shared->vdev->engine_mmio)
 		info->var.accel_flags = 0;
 
 	return 0;
@@ -317,12 +318,12 @@ static int viafb_pan_display(struct fb_var_screeninfo *var,
 
 	DEBUG_MSG(KERN_DEBUG "viafb_pan_display, address = %d\n", vram_addr);
 	if (!viafb_dual_fb) {
-		viafb_set_primary_address(vram_addr);
-		viafb_set_secondary_address(vram_addr);
+		via_set_primary_address(vram_addr);
+		via_set_secondary_address(vram_addr);
 	} else if (viapar->iga_path == IGA1)
-		viafb_set_primary_address(vram_addr);
+		via_set_primary_address(vram_addr);
 	else
-		viafb_set_secondary_address(vram_addr);
+		via_set_secondary_address(vram_addr);
 
 	return 0;
 }
@@ -696,7 +697,7 @@ static void viafb_fillrect(struct fb_info *info,
 		rop = 0xF0;
 
 	DEBUG_MSG(KERN_DEBUG "viafb 2D engine: fillrect\n");
-	if (shared->hw_bitblt(shared->engine_mmio, VIA_BITBLT_FILL,
+	if (shared->hw_bitblt(shared->vdev->engine_mmio, VIA_BITBLT_FILL,
 		rect->width, rect->height, info->var.bits_per_pixel,
 		viapar->vram_addr, info->fix.line_length, rect->dx, rect->dy,
 		NULL, 0, 0, 0, 0, fg_color, 0, rop))
@@ -718,7 +719,7 @@ static void viafb_copyarea(struct fb_info *info,
 		return;
 
 	DEBUG_MSG(KERN_DEBUG "viafb 2D engine: copyarea\n");
-	if (shared->hw_bitblt(shared->engine_mmio, VIA_BITBLT_COLOR,
+	if (shared->hw_bitblt(shared->vdev->engine_mmio, VIA_BITBLT_COLOR,
 		area->width, area->height, info->var.bits_per_pixel,
 		viapar->vram_addr, info->fix.line_length, area->dx, area->dy,
 		NULL, viapar->vram_addr, info->fix.line_length,
@@ -755,7 +756,7 @@ static void viafb_imageblit(struct fb_info *info,
 		op = VIA_BITBLT_COLOR;
 
 	DEBUG_MSG(KERN_DEBUG "viafb 2D engine: imageblit\n");
-	if (shared->hw_bitblt(shared->engine_mmio, op,
+	if (shared->hw_bitblt(shared->vdev->engine_mmio, op,
 		image->width, image->height, info->var.bits_per_pixel,
 		viapar->vram_addr, info->fix.line_length, image->dx, image->dy,
 		(u32 *)image->data, 0, 0, 0, 0, fg_color, bg_color, 0))
@@ -765,7 +766,7 @@ static void viafb_imageblit(struct fb_info *info,
 static int viafb_cursor(struct fb_info *info, struct fb_cursor *cursor)
 {
 	struct viafb_par *viapar = info->par;
-	void __iomem *engine = viapar->shared->engine_mmio;
+	void __iomem *engine = viapar->shared->vdev->engine_mmio;
 	u32 temp, xx, yy, bg_color = 0, fg_color = 0,
 		chip_name = viapar->shared->chip_info.gfx_chip_name;
 	int i, j = 0, cur_size = 64;
@@ -1018,8 +1019,8 @@ static void viafb_set_device(struct device_t active_dev)
 		viafb_SAMM_ON = active_dev.samm;
 	viafb_primary_dev = active_dev.primary_dev;
 
-	viafb_set_primary_address(0);
-	viafb_set_secondary_address(viafb_SAMM_ON ? viafb_second_offset : 0);
+	via_set_primary_address(0);
+	via_set_secondary_address(viafb_SAMM_ON ? viafb_second_offset : 0);
 	viafb_set_iga_path();
 }
 
@@ -1165,8 +1166,9 @@ static int apply_device_setting(struct viafb_ioctl_setting setting_info,
 			if (viafb_SAMM_ON)
 				viafb_primary_dev = setting_info.primary_device;
 
-			viafb_set_primary_address(0);
-			viafb_set_secondary_address(viafb_SAMM_ON ? viafb_second_offset : 0);
+			via_set_primary_address(0);
+			via_set_secondary_address(viafb_SAMM_ON ?
+				viafb_second_offset : 0);
 			viafb_set_iga_path();
 		}
 		need_set_mode = 1;
@@ -1325,6 +1327,8 @@ static void parse_dvi_port(void)
 		  output_interface);
 }
 
+#ifdef CONFIG_FB_VIA_DIRECT_PROCFS
+
 /*
  * The proc filesystem read/write function, a simple proc implement to
  * get/set the value of DPA  DVP0,   DVP0DataDriving,  DVP0ClockDriving, DVP1,
@@ -1701,16 +1705,21 @@ static void viafb_init_proc(struct proc_dir_entry **viafb_entry)
 }
 static void viafb_remove_proc(struct proc_dir_entry *viafb_entry)
 {
-	/* no problem if it was not registered */
+	struct chip_information *chip_info = &viaparinfo->shared->chip_info;
+
 	remove_proc_entry("dvp0", viafb_entry);/* parent dir */
 	remove_proc_entry("dvp1", viafb_entry);
 	remove_proc_entry("dfph", viafb_entry);
 	remove_proc_entry("dfpl", viafb_entry);
-	remove_proc_entry("vt1636", viafb_entry);
-	remove_proc_entry("vt1625", viafb_entry);
+	if (chip_info->lvds_chip_info.lvds_chip_name == VT1636_LVDS
+		|| chip_info->lvds_chip_info2.lvds_chip_name == VT1636_LVDS)
+		remove_proc_entry("vt1636", viafb_entry);
+
 	remove_proc_entry("viafb", NULL);
 }
 
+#endif /* CONFIG_FB_VIA_DIRECT_PROCFS */
+
 static int parse_mode(const char *str, u32 *xres, u32 *yres)
 {
 	char *ptr;
@@ -1732,12 +1741,13 @@ static int parse_mode(const char *str, u32 *xres, u32 *yres)
 	return 0;
 }
 
-static int __devinit via_pci_probe(struct pci_dev *pdev,
-				   const struct pci_device_id *ent)
+
+int __devinit via_fb_pci_probe(struct viafb_dev *vdev)
 {
 	u32 default_xres, default_yres;
 	struct VideoModeTable *vmode_entry;
 	struct fb_var_screeninfo default_var;
+	int rc;
 	u32 viafb_par_length;
 
 	DEBUG_MSG(KERN_INFO "VIAFB PCI Probe!!\n");
@@ -1749,14 +1759,15 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 	*/
 	viafbinfo = framebuffer_alloc(viafb_par_length +
 		ALIGN(sizeof(struct viafb_shared), BITS_PER_LONG/8),
-		&pdev->dev);
+		&vdev->pdev->dev);
 	if (!viafbinfo) {
 		printk(KERN_ERR"Could not allocate memory for viafb_info.\n");
-		return -ENODEV;
+		return -ENOMEM;
 	}
 
 	viaparinfo = (struct viafb_par *)viafbinfo->par;
 	viaparinfo->shared = viafbinfo->par + viafb_par_length;
+	viaparinfo->shared->vdev = vdev;
 	viaparinfo->vram_addr = 0;
 	viaparinfo->tmds_setting_info = &viaparinfo->shared->tmds_setting_info;
 	viaparinfo->lvds_setting_info = &viaparinfo->shared->lvds_setting_info;
@@ -1774,23 +1785,20 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 	if (!viafb_SAMM_ON)
 		viafb_dual_fb = 0;
 
-	/* Set up I2C bus stuff */
-	viafb_create_i2c_bus(viaparinfo);
-
-	viafb_init_chip_info(pdev, ent);
-	viaparinfo->fbmem = pci_resource_start(pdev, 0);
-	viaparinfo->memsize = viafb_get_fb_size_from_pci();
+	viafb_init_chip_info(vdev->chip_type);
+	/*
+	 * The framebuffer will have been successfully mapped by
+	 * the core (or we'd not be here), but we still need to
+	 * set up our own accounting.
+	 */
+	viaparinfo->fbmem = vdev->fbmem_start;
+	viaparinfo->memsize = vdev->fbmem_len;
 	viaparinfo->fbmem_free = viaparinfo->memsize;
 	viaparinfo->fbmem_used = 0;
-	viafbinfo->screen_base = ioremap_nocache(viaparinfo->fbmem,
-		viaparinfo->memsize);
-	if (!viafbinfo->screen_base) {
-		printk(KERN_INFO "ioremap failed\n");
-		return -ENOMEM;
-	}
+	viafbinfo->screen_base = vdev->fbmem;
 
-	viafbinfo->fix.mmio_start = pci_resource_start(pdev, 1);
-	viafbinfo->fix.mmio_len = pci_resource_len(pdev, 1);
+	viafbinfo->fix.mmio_start = vdev->engine_start;
+	viafbinfo->fix.mmio_len = vdev->engine_len;
 	viafbinfo->node = 0;
 	viafbinfo->fbops = &viafb_ops;
 	viafbinfo->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
@@ -1858,12 +1866,13 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 	viafbinfo->var = default_var;
 
 	if (viafb_dual_fb) {
-		viafbinfo1 = framebuffer_alloc(viafb_par_length, &pdev->dev);
+		viafbinfo1 = framebuffer_alloc(viafb_par_length,
+				&vdev->pdev->dev);
 		if (!viafbinfo1) {
 			printk(KERN_ERR
 			"allocate the second framebuffer struct error\n");
-			framebuffer_release(viafbinfo);
-			return -ENOMEM;
+			rc = -ENOMEM;
+			goto out_fb_release;
 		}
 		viaparinfo1 = viafbinfo1->par;
 		memcpy(viaparinfo1, viaparinfo, viafb_par_length);
@@ -1914,48 +1923,66 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 	viaparinfo->depth = fb_get_color_depth(&viafbinfo->var,
 		&viafbinfo->fix);
 	default_var.activate = FB_ACTIVATE_NOW;
-	fb_alloc_cmap(&viafbinfo->cmap, 256, 0);
+	rc = fb_alloc_cmap(&viafbinfo->cmap, 256, 0);
+	if (rc)
+		goto out_fb1_release;
 
 	if (viafb_dual_fb && (viafb_primary_dev == LCD_Device)
 	    && (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266)) {
-		if (register_framebuffer(viafbinfo1) < 0)
-			return -EINVAL;
+		rc = register_framebuffer(viafbinfo1);
+		if (rc)
+			goto out_dealloc_cmap;
 	}
-	if (register_framebuffer(viafbinfo) < 0)
-		return -EINVAL;
+	rc = register_framebuffer(viafbinfo);
+	if (rc)
+		goto out_fb1_unreg_lcd_cle266;
 
 	if (viafb_dual_fb && ((viafb_primary_dev != LCD_Device)
 			|| (viaparinfo->chip_info->gfx_chip_name !=
 			UNICHROME_CLE266))) {
-		if (register_framebuffer(viafbinfo1) < 0)
-			return -EINVAL;
+		rc = register_framebuffer(viafbinfo1);
+		if (rc)
+			goto out_fb_unreg;
 	}
 	DEBUG_MSG(KERN_INFO "fb%d: %s frame buffer device %dx%d-%dbpp\n",
 		  viafbinfo->node, viafbinfo->fix.id, default_var.xres,
 		  default_var.yres, default_var.bits_per_pixel);
 
+#ifdef CONFIG_FB_VIA_DIRECT_PROCFS
 	viafb_init_proc(&viaparinfo->shared->proc_entry);
+#endif
 	viafb_init_dac(IGA2);
 	return 0;
+
+out_fb_unreg:
+	unregister_framebuffer(viafbinfo);
+out_fb1_unreg_lcd_cle266:
+	if (viafb_dual_fb && (viafb_primary_dev == LCD_Device)
+	    && (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266))
+		unregister_framebuffer(viafbinfo1);
+out_dealloc_cmap:
+	fb_dealloc_cmap(&viafbinfo->cmap);
+out_fb1_release:
+	if (viafbinfo1)
+		framebuffer_release(viafbinfo1);
+out_fb_release:
+	framebuffer_release(viafbinfo);
+	return rc;
 }
 
-static void __devexit via_pci_remove(struct pci_dev *pdev)
+void __devexit via_fb_pci_remove(struct pci_dev *pdev)
 {
 	DEBUG_MSG(KERN_INFO "via_pci_remove!\n");
 	fb_dealloc_cmap(&viafbinfo->cmap);
 	unregister_framebuffer(viafbinfo);
 	if (viafb_dual_fb)
 		unregister_framebuffer(viafbinfo1);
-	iounmap((void *)viafbinfo->screen_base);
-	iounmap(viaparinfo->shared->engine_mmio);
-
-	viafb_delete_i2c_buss(viaparinfo);
-
+#ifdef CONFIG_FB_VIA_DIRECT_PROCFS
+	viafb_remove_proc(viaparinfo->shared->proc_entry);
+#endif
 	framebuffer_release(viafbinfo);
 	if (viafb_dual_fb)
 		framebuffer_release(viafbinfo1);
-
-	viafb_remove_proc(viaparinfo->shared->proc_entry);
 }
 
 #ifndef MODULE
@@ -2031,41 +2058,10 @@ static int __init viafb_setup(char *options)
 }
 #endif
 
-static struct pci_device_id viafb_pci_table[] __devinitdata = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CLE266_DID),
-	  .driver_data = UNICHROME_CLE266 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_PM800_DID),
-	  .driver_data = UNICHROME_PM800 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K400_DID),
-	  .driver_data = UNICHROME_K400 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K800_DID),
-	  .driver_data = UNICHROME_K800 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M890_DID),
-	  .driver_data = UNICHROME_CN700 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K8M890_DID),
-	  .driver_data = UNICHROME_K8M890 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CX700_DID),
-	  .driver_data = UNICHROME_CX700 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M900_DID),
-	  .driver_data = UNICHROME_P4M900 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CN750_DID),
-	  .driver_data = UNICHROME_CN750 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX800_DID),
-	  .driver_data = UNICHROME_VX800 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX855_DID),
-	  .driver_data = UNICHROME_VX855 },
-	{ }
-};
-MODULE_DEVICE_TABLE(pci, viafb_pci_table);
-
-static struct pci_driver viafb_driver = {
-	.name		= "viafb",
-	.id_table	= viafb_pci_table,
-	.probe		= via_pci_probe,
-	.remove		= __devexit_p(via_pci_remove),
-};
-
-static int __init viafb_init(void)
+/*
+ * These are called out of via-core for now.
+ */
+int __init viafb_init(void)
 {
 	u32 dummy;
 #ifndef MODULE
@@ -2084,13 +2080,12 @@ static int __init viafb_init(void)
 	printk(KERN_INFO
        "VIA Graphics Intergration Chipset framebuffer %d.%d initializing\n",
 	       VERSION_MAJOR, VERSION_MINOR);
-	return pci_register_driver(&viafb_driver);
+	return 0;
 }
 
-static void __exit viafb_exit(void)
+void __exit viafb_exit(void)
 {
 	DEBUG_MSG(KERN_INFO "viafb_exit!\n");
-	pci_unregister_driver(&viafb_driver);
 }
 
 static struct fb_ops viafb_ops = {
@@ -2110,8 +2105,6 @@ static struct fb_ops viafb_ops = {
 	.fb_sync = viafb_sync,
 };
 
-module_init(viafb_init);
-module_exit(viafb_exit);
 
 #ifdef MODULE
 module_param(viafb_mode, charp, S_IRUSR);
diff --git a/drivers/video/via/viafbdev.h b/drivers/video/via/viafbdev.h
index 61b5953cd15..52a35fabba9 100644
--- a/drivers/video/via/viafbdev.h
+++ b/drivers/video/via/viafbdev.h
@@ -24,12 +24,12 @@
 
 #include <linux/proc_fs.h>
 #include <linux/fb.h>
+#include <linux/spinlock.h>
 
 #include "ioctl.h"
 #include "share.h"
 #include "chip.h"
 #include "hw.h"
-#include "via_i2c.h"
 
 #define VERSION_MAJOR       2
 #define VERSION_KERNEL      6	/* For kernel 2.6 */
@@ -37,11 +37,11 @@
 #define VERSION_OS          0	/* 0: for 32 bits OS, 1: for 64 bits OS */
 #define VERSION_MINOR       4
 
+#define VIAFB_NUM_I2C		5
+
 struct viafb_shared {
 	struct proc_dir_entry *proc_entry;	/*viafb proc entry */
-
-	/* I2C stuff */
-	struct via_i2c_stuff i2c_stuff;
+	struct viafb_dev *vdev;			/* Global dev info */
 
 	/* All the information will be needed to set engine */
 	struct tmds_setting_information tmds_setting_info;
@@ -51,7 +51,6 @@ struct viafb_shared {
 	struct chip_information chip_info;
 
 	/* hardware acceleration stuff */
-	void __iomem *engine_mmio;
 	u32 cursor_vram_addr;
 	u32 vq_vram_addr;	/* virtual queue address in video ram */
 	int (*hw_bitblt)(void __iomem *engine, u8 op, u32 width, u32 height,
@@ -99,4 +98,9 @@ u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information
 void viafb_gpio_i2c_write_mask_lvds(struct lvds_setting_information
 			      *plvds_setting_info, struct lvds_chip_information
 			      *plvds_chip_info, struct IODATA io_data);
+int via_fb_pci_probe(struct viafb_dev *vdev);
+void via_fb_pci_remove(struct pci_dev *pdev);
+/* Temporary */
+int viafb_init(void);
+void viafb_exit(void);
 #endif /* __VIAFBDEV_H__ */
diff --git a/drivers/video/via/viamode.c b/drivers/video/via/viamode.c
index af50e244016..2dbad3c0f67 100644
--- a/drivers/video/via/viamode.c
+++ b/drivers/video/via/viamode.c
@@ -19,6 +19,7 @@
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
+#include <linux/via-core.h>
 #include "global.h"
 struct res_map_refresh res_map_refresh_tbl[] = {
 /*hres, vres, vclock, vmode_refresh*/
@@ -66,6 +67,7 @@ struct res_map_refresh res_map_refresh_tbl[] = {
 	{1088, 612, RES_1088X612_60HZ_PIXCLOCK, 60},
 	{1152, 720, RES_1152X720_60HZ_PIXCLOCK, 60},
 	{1200, 720, RES_1200X720_60HZ_PIXCLOCK, 60},
+	{1200, 900, RES_1200X900_60HZ_PIXCLOCK, 60},
 	{1280, 600, RES_1280X600_60HZ_PIXCLOCK, 60},
 	{1280, 720, RES_1280X720_50HZ_PIXCLOCK, 50},
 	{1280, 768, RES_1280X768_50HZ_PIXCLOCK, 50},
@@ -759,6 +761,16 @@ struct crt_mode_table CRTM1200x720[] = {
 	 {1568, 1200, 1200, 368, 1256, 128, 746, 720, 720, 26, 721, 3} }
 };
 
+/* 1200x900 (DCON) */
+struct crt_mode_table DCON1200x900[] = {
+	/* r_rate,          vclk,               hsp,               vsp   */
+	{REFRESH_60, CLK_57_275M, M1200X900_R60_HSP, M1200X900_R60_VSP,
+	/* The correct htotal is 1240, but this doesn't raster on VX855. */
+	/* Via suggested changing to a multiple of 16, hence 1264.       */
+	/*  HT,   HA,  HBS, HBE,  HSS, HSE,  VT,  VA, VBS, VBE, VSS, VSE */
+	 {1264, 1200, 1200,  64, 1211,  32, 912, 900, 900,  12, 901, 10} }
+};
+
 /* 1280x600 (GTF) */
 struct crt_mode_table CRTM1280x600[] = {
 	/* r_rate,          vclk,              hsp,             vsp   */
@@ -937,6 +949,9 @@ struct VideoModeTable viafb_modes[] = {
 	/* Display : 1200x720 (GTF) */
 	{CRTM1200x720, ARRAY_SIZE(CRTM1200x720)},
 
+	/* Display : 1200x900 (DCON) */
+	{DCON1200x900, ARRAY_SIZE(DCON1200x900)},
+
 	/* Display : 1280x600 (GTF) */
 	{CRTM1280x600, ARRAY_SIZE(CRTM1280x600)},
 
diff --git a/drivers/video/via/vt1636.c b/drivers/video/via/vt1636.c
index a6b37494e79..d65bf1aee87 100644
--- a/drivers/video/via/vt1636.c
+++ b/drivers/video/via/vt1636.c
@@ -19,6 +19,8 @@
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
+#include <linux/via-core.h>
+#include <linux/via_i2c.h>
 #include "global.h"
 
 u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information
@@ -27,9 +29,8 @@ u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information
 {
 	u8 data;
 
-	viaparinfo->shared->i2c_stuff.i2c_port = plvds_chip_info->i2c_port;
-	viafb_i2c_readbyte(plvds_chip_info->lvds_chip_slave_addr, index, &data);
-
+	viafb_i2c_readbyte(plvds_chip_info->i2c_port,
+			   plvds_chip_info->lvds_chip_slave_addr, index, &data);
 	return data;
 }
 
@@ -39,14 +40,13 @@ void viafb_gpio_i2c_write_mask_lvds(struct lvds_setting_information
 {
 	int index, data;
 
-	viaparinfo->shared->i2c_stuff.i2c_port = plvds_chip_info->i2c_port;
-
 	index = io_data.Index;
 	data = viafb_gpio_i2c_read_lvds(plvds_setting_info, plvds_chip_info,
 		index);
 	data = (data & (~io_data.Mask)) | io_data.Data;
 
-	viafb_i2c_writebyte(plvds_chip_info->lvds_chip_slave_addr, index, data);
+	viafb_i2c_writebyte(plvds_chip_info->i2c_port,
+			    plvds_chip_info->lvds_chip_slave_addr, index, data);
 }
 
 void viafb_init_lvds_vt1636(struct lvds_setting_information
@@ -159,7 +159,7 @@ void viafb_disable_lvds_vt1636(struct lvds_setting_information
 	}
 }
 
-bool viafb_lvds_identify_vt1636(void)
+bool viafb_lvds_identify_vt1636(u8 i2c_adapter)
 {
 	u8 Buffer[2];
 
@@ -167,26 +167,20 @@ bool viafb_lvds_identify_vt1636(void)
 
 	/* Sense VT1636 LVDS Transmiter */
 	viaparinfo->chip_info->lvds_chip_info.lvds_chip_slave_addr =
-	VT1636_LVDS_I2C_ADDR;
+		VT1636_LVDS_I2C_ADDR;
 
 	/* Check vendor ID first: */
-	viafb_i2c_readbyte((u8) viaparinfo->chip_info->lvds_chip_info.
-	lvds_chip_slave_addr,
-		    0x00, &Buffer[0]);
-	viafb_i2c_readbyte((u8) viaparinfo->chip_info->lvds_chip_info.
-		lvds_chip_slave_addr,
-		    0x01, &Buffer[1]);
+	if (viafb_i2c_readbyte(i2c_adapter, VT1636_LVDS_I2C_ADDR,
+					0x00, &Buffer[0]))
+		return false;
+	viafb_i2c_readbyte(i2c_adapter, VT1636_LVDS_I2C_ADDR, 0x01, &Buffer[1]);
 
 	if (!((Buffer[0] == 0x06) && (Buffer[1] == 0x11)))
 		return false;
 
 	/* Check Chip ID: */
-	viafb_i2c_readbyte((u8) viaparinfo->chip_info->lvds_chip_info.
-	lvds_chip_slave_addr,
-		    0x02, &Buffer[0]);
-	viafb_i2c_readbyte((u8) viaparinfo->chip_info->lvds_chip_info.
-		lvds_chip_slave_addr,
-		    0x03, &Buffer[1]);
+	viafb_i2c_readbyte(i2c_adapter, VT1636_LVDS_I2C_ADDR, 0x02, &Buffer[0]);
+	viafb_i2c_readbyte(i2c_adapter, VT1636_LVDS_I2C_ADDR, 0x03, &Buffer[1]);
 	if ((Buffer[0] == 0x45) && (Buffer[1] == 0x33)) {
 		viaparinfo->chip_info->lvds_chip_info.lvds_chip_name =
 			VT1636_LVDS;
diff --git a/drivers/video/via/vt1636.h b/drivers/video/via/vt1636.h
index 2a150c58c7e..4c1314e5746 100644
--- a/drivers/video/via/vt1636.h
+++ b/drivers/video/via/vt1636.h
@@ -22,7 +22,7 @@
 #ifndef _VT1636_H_
 #define _VT1636_H_
 #include "chip.h"
-bool viafb_lvds_identify_vt1636(void);
+bool viafb_lvds_identify_vt1636(u8 i2c_adapter);
 void viafb_init_lvds_vt1636(struct lvds_setting_information
 	*plvds_setting_info, struct lvds_chip_information *plvds_chip_info);
 void viafb_enable_lvds_vt1636(struct lvds_setting_information
author	Grant Likely <grant.likely@secretlab.ca>	2010-05-22 00:36:56 -0600
committer	Grant Likely <grant.likely@secretlab.ca>	2010-05-22 00:36:56 -0600
commit	cf9b59e9d3e008591d1f54830f570982bb307a0d (patch)
tree	113478ce8fd8c832ba726ffdf59b82cb46356476 /drivers/video
parent	44504b2bebf8b5823c59484e73096a7d6574471d (diff)
parent	f4b87dee923342505e1ddba8d34ce9de33e75050 (diff)