Merge tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core changes from Greg Kroah-Hartman:
 "Here's the big driver core pull request for 3.6-rc1.

  Unlike 3.5, this kernel should be a lot tamer, with the printk changes
  now settled down.  All we have here is some extcon driver updates, w1
  driver updates, a few printk cleanups that weren't needed for 3.5, but
  are good to have now, and some other minor fixes/changes in the driver
  core.

  All of these have been in the linux-next releases for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits)
  printk: Export struct log size and member offsets through vmcoreinfo
  Drivers: hv: Change the hex constant to a decimal constant
  driver core: don't trigger uevent after failure
  extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device
  sysfs: fail dentry revalidation after namespace change fix
  sysfs: fail dentry revalidation after namespace change
  extcon: spelling of detach in function doc
  extcon: arizona: Stop microphone detection if we give up on it
  extcon: arizona: Update cable reporting calls and split headset
  PM / Runtime: Do not increment device usage counts before probing
  kmsg - do not flush partial lines when the console is busy
  kmsg - export "continuation record" flag to /dev/kmsg
  kmsg - avoid warning for CONFIG_PRINTK=n compilations
  kmsg - properly print over-long continuation lines
  driver-core: Use kobj_to_dev instead of re-implementing it
  driver-core: Move kobj_to_dev from genhd.h to device.h
  driver core: Move deferred devices to the end of dpm_list before probing
  driver core: move uevent call to driver_register
  driver core: fix shutdown races with probe/remove(v3)
  Extcon: Arizona: Add driver for Wolfson Arizona class devices
  ...

20 files changed, 560 insertions, 99 deletions

diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c
index a0c8965c1a7..530a2d30906 100644
--- a/drivers/w1/masters/ds1wm.c
+++ b/drivers/w1/masters/ds1wm.c
@@ -334,7 +334,9 @@ static void ds1wm_search(void *data, struct w1_master *master_dev,
 			return;
 		}
 
+		mutex_lock(&master_dev->bus_mutex);
 		if (ds1wm_reset(ds1wm_data)) {
+			mutex_unlock(&master_dev->bus_mutex);
 			dev_dbg(&ds1wm_data->pdev->dev,
 				"pass: %d reset error (or no slaves)\n", pass);
 			break;
@@ -387,6 +389,7 @@ static void ds1wm_search(void *data, struct w1_master *master_dev,
 
 		}
 		if (ds1wm_data->read_error) {
+			mutex_unlock(&master_dev->bus_mutex);
 			dev_err(&ds1wm_data->pdev->dev,
 				"pass: %d read error, retrying\n", pass);
 			break;
@@ -400,6 +403,7 @@ static void ds1wm_search(void *data, struct w1_master *master_dev,
 		dev_dbg(&ds1wm_data->pdev->dev,
 			"pass: %d resetting bus\n", pass);
 		ds1wm_reset(ds1wm_data);
+		mutex_unlock(&master_dev->bus_mutex);
 		if ((r_prime & ((u64)1 << 63)) && (d & ((u64)1 << 63))) {
 			dev_err(&ds1wm_data->pdev->dev,
 				"pass: %d bus error, retrying\n", pass);
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 291897c881b..4b0fcf3c2d0 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -178,6 +178,7 @@ static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status)
 		hdq_data->hdq_irqstatus, OMAP_HDQ_TIMEOUT);
 	if (ret == 0) {
 		dev_dbg(hdq_data->dev, "TX wait elapsed\n");
+		ret = -ETIMEDOUT;
 		goto out;
 	}
 
@@ -185,7 +186,7 @@ static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status)
 	/* check irqstatus */
 	if (!(*status & OMAP_HDQ_INT_STATUS_TXCOMPLETE)) {
 		dev_dbg(hdq_data->dev, "timeout waiting for"
-			"TXCOMPLETE/RXCOMPLETE, %x", *status);
+			" TXCOMPLETE/RXCOMPLETE, %x", *status);
 		ret = -ETIMEDOUT;
 		goto out;
 	}
@@ -196,7 +197,7 @@ static int hdq_write_byte(struct hdq_data *hdq_data, u8 val, u8 *status)
 			OMAP_HDQ_FLAG_CLEAR, &tmp_status);
 	if (ret) {
 		dev_dbg(hdq_data->dev, "timeout waiting GO bit"
-			"return to zero, %x", tmp_status);
+			" return to zero, %x", tmp_status);
 	}
 
 out:
@@ -339,7 +340,7 @@ static int omap_hdq_break(struct hdq_data *hdq_data)
 			&tmp_status);
 	if (ret)
 		dev_dbg(hdq_data->dev, "timeout waiting INIT&GO bits"
-			"return to zero, %x", tmp_status);
+			" return to zero, %x", tmp_status);
 
 out:
 	mutex_unlock(&hdq_data->hdq_mutex);
@@ -351,7 +352,6 @@ static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
 {
 	int ret = 0;
 	u8 status;
-	unsigned long timeout = jiffies + OMAP_HDQ_TIMEOUT;
 
 	ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
 	if (ret < 0) {
@@ -369,22 +369,20 @@ static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
 			OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO,
 			OMAP_HDQ_CTRL_STATUS_DIR | OMAP_HDQ_CTRL_STATUS_GO);
 		/*
-		 * The RX comes immediately after TX. It
-		 * triggers another interrupt before we
-		 * sleep. So we have to wait for RXCOMPLETE bit.
+		 * The RX comes immediately after TX.
 		 */
-		while (!(hdq_data->hdq_irqstatus
-			& OMAP_HDQ_INT_STATUS_RXCOMPLETE)
-			&& time_before(jiffies, timeout)) {
-			schedule_timeout_uninterruptible(1);
-		}
+		wait_event_timeout(hdq_wait_queue,
+				   (hdq_data->hdq_irqstatus
+				    & OMAP_HDQ_INT_STATUS_RXCOMPLETE),
+				   OMAP_HDQ_TIMEOUT);
+
 		hdq_reg_merge(hdq_data, OMAP_HDQ_CTRL_STATUS, 0,
 			OMAP_HDQ_CTRL_STATUS_DIR);
 		status = hdq_data->hdq_irqstatus;
 		/* check irqstatus */
 		if (!(status & OMAP_HDQ_INT_STATUS_RXCOMPLETE)) {
 			dev_dbg(hdq_data->dev, "timeout waiting for"
-				"RXCOMPLETE, %x", status);
+				" RXCOMPLETE, %x", status);
 			ret = -ETIMEDOUT;
 			goto out;
 		}
@@ -394,7 +392,7 @@ static int hdq_read_byte(struct hdq_data *hdq_data, u8 *val)
 out:
 	mutex_unlock(&hdq_data->hdq_mutex);
 rtn:
-	return 0;
+	return ret;
 
 }
 
@@ -456,7 +454,7 @@ static int omap_hdq_put(struct hdq_data *hdq_data)
 
 	if (0 == hdq_data->hdq_usecount) {
 		dev_dbg(hdq_data->dev, "attempt to decrement use count"
-			"when it is zero");
+			" when it is zero");
 		ret = -EINVAL;
 	} else {
 		hdq_data->hdq_usecount--;
@@ -524,7 +522,7 @@ static void omap_w1_write_byte(void *_hdq, u8 byte)
 	mutex_unlock(&hdq_data->hdq_mutex);
 
 	ret = hdq_write_byte(hdq_data, byte, &status);
-	if (ret == 0) {
+	if (ret < 0) {
 		dev_dbg(hdq_data->dev, "TX failure:Ctrl status %x\n", status);
 		return;
 	}
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index eb9e376d624..67526690acb 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -94,6 +94,19 @@ config W1_SLAVE_DS2781
 
 	  If you are unsure, say N.
 
+config W1_SLAVE_DS28E04
+	tristate "4096-Bit Addressable 1-Wire EEPROM with PIO (DS28E04-100)"
+	depends on W1
+	select CRC16
+	help
+	  If you enable this you will have the DS28E04-100
+	  chip support.
+
+	  Say Y here if you want to use a 1-wire
+	  4kb EEPROM with PIO family device (DS28E04).
+
+	  If you are unsure, say N.
+
 config W1_SLAVE_BQ27000
 	tristate "BQ27000 slave support"
 	depends on W1
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index c4f1859fb52..05188f6aab5 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_W1_SLAVE_DS2760)	+= w1_ds2760.o
 obj-$(CONFIG_W1_SLAVE_DS2780)	+= w1_ds2780.o
 obj-$(CONFIG_W1_SLAVE_DS2781)	+= w1_ds2781.o
 obj-$(CONFIG_W1_SLAVE_BQ27000)	+= w1_bq27000.o
+obj-$(CONFIG_W1_SLAVE_DS28E04)	+= w1_ds28e04.o
diff --git a/drivers/w1/slaves/w1_bq27000.c b/drivers/w1/slaves/w1_bq27000.c
index 52ad812fa1e..773dca5beaf 100644
--- a/drivers/w1/slaves/w1_bq27000.c
+++ b/drivers/w1/slaves/w1_bq27000.c
@@ -31,10 +31,10 @@ static int w1_bq27000_read(struct device *dev, unsigned int reg)
 	u8 val;
 	struct w1_slave *sl = container_of(dev->parent, struct w1_slave, dev);
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 	w1_write_8(sl->master, HDQ_CMD_READ | reg);
 	val = w1_read_8(sl->master);
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return val;
 }
diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c
index 8e813eed0f0..441ad3a3b58 100644
--- a/drivers/w1/slaves/w1_ds2408.c
+++ b/drivers/w1/slaves/w1_ds2408.c
@@ -52,11 +52,11 @@ static int _read_reg(struct w1_slave *sl, u8 address, unsigned char* buf)
 	if (!buf)
 		return -EINVAL;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 	dev_dbg(&sl->dev, "mutex locked");
 
 	if (w1_reset_select_slave(sl)) {
-		mutex_unlock(&sl->master->mutex);
+		mutex_unlock(&sl->master->bus_mutex);
 		return -EIO;
 	}
 
@@ -66,7 +66,7 @@ static int _read_reg(struct w1_slave *sl, u8 address, unsigned char* buf)
 	w1_write_block(sl->master, wrbuf, 3);
 	*buf = w1_read_8(sl->master);
 
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 	dev_dbg(&sl->dev, "mutex unlocked");
 	return 1;
 }
@@ -165,7 +165,7 @@ static ssize_t w1_f29_write_output(
 		return -EFAULT;
 
 	dev_dbg(&sl->dev, "locking mutex for write_output");
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 	dev_dbg(&sl->dev, "mutex locked");
 
 	if (w1_reset_select_slave(sl))
@@ -200,14 +200,14 @@ static ssize_t w1_f29_write_output(
 		/* read the result of the READ_PIO_REGS command */
 		if (w1_read_8(sl->master) == *buf) {
 			/* success! */
-			mutex_unlock(&sl->master->mutex);
+			mutex_unlock(&sl->master->bus_mutex);
 			dev_dbg(&sl->dev,
 				"mutex unlocked, retries:%d", retries);
 			return 1;
 		}
 	}
 error:
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 	dev_dbg(&sl->dev, "mutex unlocked in error, retries:%d", retries);
 
 	return -EIO;
@@ -228,7 +228,7 @@ static ssize_t w1_f29_write_activity(
 	if (count != 1 || off != 0)
 		return -EFAULT;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	if (w1_reset_select_slave(sl))
 		goto error;
@@ -236,7 +236,7 @@ static ssize_t w1_f29_write_activity(
 	while (retries--) {
 		w1_write_8(sl->master, W1_F29_FUNC_RESET_ACTIVITY_LATCHES);
 		if (w1_read_8(sl->master) == W1_F29_SUCCESS_CONFIRM_BYTE) {
-			mutex_unlock(&sl->master->mutex);
+			mutex_unlock(&sl->master->bus_mutex);
 			return 1;
 		}
 		if (w1_reset_resume_command(sl->master))
@@ -244,7 +244,7 @@ static ssize_t w1_f29_write_activity(
 	}
 
 error:
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 	return -EIO;
 }
 
@@ -263,7 +263,7 @@ static ssize_t w1_f29_write_status_control(
 	if (count != 1 || off != 0)
 		return -EFAULT;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	if (w1_reset_select_slave(sl))
 		goto error;
@@ -285,12 +285,12 @@ static ssize_t w1_f29_write_status_control(
 		w1_write_block(sl->master, w1_buf, 3);
 		if (w1_read_8(sl->master) == *buf) {
 			/* success! */
-			mutex_unlock(&sl->master->mutex);
+			mutex_unlock(&sl->master->bus_mutex);
 			return 1;
 		}
 	}
 error:
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return -EIO;
 }
diff --git a/drivers/w1/slaves/w1_ds2423.c b/drivers/w1/slaves/w1_ds2423.c
index 7a7dbe5026f..40a10b5ed12 100644
--- a/drivers/w1/slaves/w1_ds2423.c
+++ b/drivers/w1/slaves/w1_ds2423.c
@@ -66,7 +66,7 @@ static ssize_t w1_counter_read(struct device *device,
 	wrbuf[0]	= 0xA5;
 	wrbuf[1]	= rom_addr & 0xFF;
 	wrbuf[2]	= rom_addr >> 8;
-	mutex_lock(&dev->mutex);
+	mutex_lock(&dev->bus_mutex);
 	if (!w1_reset_select_slave(sl)) {
 		w1_write_block(dev, wrbuf, 3);
 		read_byte_count = 0;
@@ -124,7 +124,7 @@ static ssize_t w1_counter_read(struct device *device,
 	} else {
 		c -= snprintf(out_buf + PAGE_SIZE - c, c, "Connection error");
 	}
-	mutex_unlock(&dev->mutex);
+	mutex_unlock(&dev->bus_mutex);
 	return PAGE_SIZE - c;
 }
 
diff --git a/drivers/w1/slaves/w1_ds2431.c b/drivers/w1/slaves/w1_ds2431.c
index 84e2410aec1..984b30331a4 100644
--- a/drivers/w1/slaves/w1_ds2431.c
+++ b/drivers/w1/slaves/w1_ds2431.c
@@ -107,7 +107,7 @@ static ssize_t w1_f2d_read_bin(struct file *filp, struct kobject *kobj,
 	if (count == 0)
 		return 0;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	/* read directly from the EEPROM in chunks of W1_F2D_READ_MAXLEN */
 	while (todo > 0) {
@@ -126,7 +126,7 @@ static ssize_t w1_f2d_read_bin(struct file *filp, struct kobject *kobj,
 		off += W1_F2D_READ_MAXLEN;
 	}
 
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return count;
 }
@@ -214,7 +214,7 @@ static ssize_t w1_f2d_write_bin(struct file *filp, struct kobject *kobj,
 	if (count == 0)
 		return 0;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	/* Can only write data in blocks of the size of the scratchpad */
 	addr = off;
@@ -259,7 +259,7 @@ static ssize_t w1_f2d_write_bin(struct file *filp, struct kobject *kobj,
 	}
 
 out_up:
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return count;
 }
diff --git a/drivers/w1/slaves/w1_ds2433.c b/drivers/w1/slaves/w1_ds2433.c
index 0f7b8f9c509..85f2cdb27fa 100644
--- a/drivers/w1/slaves/w1_ds2433.c
+++ b/drivers/w1/slaves/w1_ds2433.c
@@ -107,7 +107,7 @@ static ssize_t w1_f23_read_bin(struct file *filp, struct kobject *kobj,
 	if ((count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE)) == 0)
 		return 0;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 #ifdef CONFIG_W1_SLAVE_DS2433_CRC
 
@@ -138,7 +138,7 @@ static ssize_t w1_f23_read_bin(struct file *filp, struct kobject *kobj,
 #endif	/* CONFIG_W1_SLAVE_DS2433_CRC */
 
 out_up:
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return count;
 }
@@ -233,7 +233,7 @@ static ssize_t w1_f23_write_bin(struct file *filp, struct kobject *kobj,
 	}
 #endif	/* CONFIG_W1_SLAVE_DS2433_CRC */
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	/* Can only write data to one page at a time */
 	idx = 0;
@@ -251,7 +251,7 @@ static ssize_t w1_f23_write_bin(struct file *filp, struct kobject *kobj,
 	}
 
 out_up:
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return count;
 }
diff --git a/drivers/w1/slaves/w1_ds2760.c b/drivers/w1/slaves/w1_ds2760.c
index 5754c9a4f58..aa7bd5fa2fa 100644
--- a/drivers/w1/slaves/w1_ds2760.c
+++ b/drivers/w1/slaves/w1_ds2760.c
@@ -31,7 +31,7 @@ static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
 	if (!dev)
 		return 0;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	if (addr > DS2760_DATA_SIZE || addr < 0) {
 		count = 0;
@@ -54,7 +54,7 @@ static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
 	}
 
 out:
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return count;
 }
@@ -76,14 +76,14 @@ static int w1_ds2760_eeprom_cmd(struct device *dev, int addr, int cmd)
 	if (!dev)
 		return -EINVAL;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	if (w1_reset_select_slave(sl) == 0) {
 		w1_write_8(sl->master, cmd);
 		w1_write_8(sl->master, addr);
 	}
 
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 	return 0;
 }
 
diff --git a/drivers/w1/slaves/w1_ds2780.c b/drivers/w1/slaves/w1_ds2780.c
index 39f78c0b143..7b09307de0e 100644
--- a/drivers/w1/slaves/w1_ds2780.c
+++ b/drivers/w1/slaves/w1_ds2780.c
@@ -60,30 +60,16 @@ int w1_ds2780_io(struct device *dev, char *buf, int addr, size_t count,
 	if (!dev)
 		return -ENODEV;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	ret = w1_ds2780_do_io(dev, buf, addr, count, io);
 
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return ret;
 }
 EXPORT_SYMBOL(w1_ds2780_io);
 
-int w1_ds2780_io_nolock(struct device *dev, char *buf, int addr, size_t count,
-			int io)
-{
-	int ret;
-
-	if (!dev)
-		return -ENODEV;
-
-	ret = w1_ds2780_do_io(dev, buf, addr, count, io);
-
-	return ret;
-}
-EXPORT_SYMBOL(w1_ds2780_io_nolock);
-
 int w1_ds2780_eeprom_cmd(struct device *dev, int addr, int cmd)
 {
 	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
@@ -91,14 +77,14 @@ int w1_ds2780_eeprom_cmd(struct device *dev, int addr, int cmd)
 	if (!dev)
 		return -EINVAL;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	if (w1_reset_select_slave(sl) == 0) {
 		w1_write_8(sl->master, cmd);
 		w1_write_8(sl->master, addr);
 	}
 
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 	return 0;
 }
 EXPORT_SYMBOL(w1_ds2780_eeprom_cmd);
diff --git a/drivers/w1/slaves/w1_ds2780.h b/drivers/w1/slaves/w1_ds2780.h
index 73737936502..a1fba79eb1b 100644
--- a/drivers/w1/slaves/w1_ds2780.h
+++ b/drivers/w1/slaves/w1_ds2780.h
@@ -124,8 +124,6 @@
 
 extern int w1_ds2780_io(struct device *dev, char *buf, int addr, size_t count,
 			int io);
-extern int w1_ds2780_io_nolock(struct device *dev, char *buf, int addr,
-			size_t count, int io);
 extern int w1_ds2780_eeprom_cmd(struct device *dev, int addr, int cmd);
 
 #endif /* !_W1_DS2780_H */
diff --git a/drivers/w1/slaves/w1_ds2781.c b/drivers/w1/slaves/w1_ds2781.c
index 0d0c7985293..877daf74159 100644
--- a/drivers/w1/slaves/w1_ds2781.c
+++ b/drivers/w1/slaves/w1_ds2781.c
@@ -58,30 +58,16 @@ int w1_ds2781_io(struct device *dev, char *buf, int addr, size_t count,
 	if (!dev)
 		return -ENODEV;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	ret = w1_ds2781_do_io(dev, buf, addr, count, io);
 
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 
 	return ret;
 }
 EXPORT_SYMBOL(w1_ds2781_io);
 
-int w1_ds2781_io_nolock(struct device *dev, char *buf, int addr, size_t count,
-			int io)
-{
-	int ret;
-
-	if (!dev)
-		return -ENODEV;
-
-	ret = w1_ds2781_do_io(dev, buf, addr, count, io);
-
-	return ret;
-}
-EXPORT_SYMBOL(w1_ds2781_io_nolock);
-
 int w1_ds2781_eeprom_cmd(struct device *dev, int addr, int cmd)
 {
 	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
@@ -89,14 +75,14 @@ int w1_ds2781_eeprom_cmd(struct device *dev, int addr, int cmd)
 	if (!dev)
 		return -EINVAL;
 
-	mutex_lock(&sl->master->mutex);
+	mutex_lock(&sl->master->bus_mutex);
 
 	if (w1_reset_select_slave(sl) == 0) {
 		w1_write_8(sl->master, cmd);
 		w1_write_8(sl->master, addr);
 	}
 
-	mutex_unlock(&sl->master->mutex);
+	mutex_unlock(&sl->master->bus_mutex);
 	return 0;
 }
 EXPORT_SYMBOL(w1_ds2781_eeprom_cmd);
diff --git a/drivers/w1/slaves/w1_ds2781.h b/drivers/w1/slaves/w1_ds2781.h
index 82bc66497b4..557dfb0b4f6 100644
--- a/drivers/w1/slaves/w1_ds2781.h
+++ b/drivers/w1/slaves/w1_ds2781.h
@@ -129,8 +129,6 @@
 
 extern int w1_ds2781_io(struct device *dev, char *buf, int addr, size_t count,
 			int io);
-extern int w1_ds2781_io_nolock(struct device *dev, char *buf, int addr,
-			size_t count, int io);
 extern int w1_ds2781_eeprom_cmd(struct device *dev, int addr, int cmd);
 
 #endif /* !_W1_DS2781_H */
diff --git a/drivers/w1/slaves/w1_ds28e04.c b/drivers/w1/slaves/w1_ds28e04.c
new file mode 100644
index 00000000000..98117db595b
--- /dev/null
+++ b/drivers/w1/slaves/w1_ds28e04.c
@@ -0,0 +1,469 @@
+/*
+ *	w1_ds28e04.c - w1 family 1C (DS28E04) driver
+ *
+ * Copyright (c) 2012 Markus Franke <franke.m@sebakmt.com>
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/crc16.h>
+#include <linux/uaccess.h>
+
+#define CRC16_INIT		0
+#define CRC16_VALID		0xb001
+
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_family.h"
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Markus Franke <franke.m@sebakmt.com>, <franm@hrz.tu-chemnitz.de>");
+MODULE_DESCRIPTION("w1 family 1C driver for DS28E04, 4kb EEPROM and PIO");
+
+/* Allow the strong pullup to be disabled, but default to enabled.
+ * If it was disabled a parasite powered device might not get the required
+ * current to copy the data from the scratchpad to EEPROM.  If it is enabled
+ * parasite powered devices have a better chance of getting the current
+ * required.
+ */
+static int w1_strong_pullup = 1;
+module_param_named(strong_pullup, w1_strong_pullup, int, 0);
+
+/* enable/disable CRC checking on DS28E04-100 memory accesses */
+static char w1_enable_crccheck = 1;
+
+#define W1_EEPROM_SIZE		512
+#define W1_PAGE_COUNT		16
+#define W1_PAGE_SIZE		32
+#define W1_PAGE_BITS		5
+#define W1_PAGE_MASK		0x1F
+
+#define W1_F1C_READ_EEPROM	0xF0
+#define W1_F1C_WRITE_SCRATCH	0x0F
+#define W1_F1C_READ_SCRATCH	0xAA
+#define W1_F1C_COPY_SCRATCH	0x55
+#define W1_F1C_ACCESS_WRITE	0x5A
+
+#define W1_1C_REG_LOGIC_STATE	0x220
+
+struct w1_f1C_data {
+	u8	memory[W1_EEPROM_SIZE];
+	u32	validcrc;
+};
+
+/**
+ * Check the file size bounds and adjusts count as needed.
+ * This would not be needed if the file size didn't reset to 0 after a write.
+ */
+static inline size_t w1_f1C_fix_count(loff_t off, size_t count, size_t size)
+{
+	if (off > size)
+		return 0;
+
+	if ((off + count) > size)
+		return size - off;
+
+	return count;
+}
+
+static int w1_f1C_refresh_block(struct w1_slave *sl, struct w1_f1C_data *data,
+				int block)
+{
+	u8	wrbuf[3];
+	int	off = block * W1_PAGE_SIZE;
+
+	if (data->validcrc & (1 << block))
+		return 0;
+
+	if (w1_reset_select_slave(sl)) {
+		data->validcrc = 0;
+		return -EIO;
+	}
+
+	wrbuf[0] = W1_F1C_READ_EEPROM;
+	wrbuf[1] = off & 0xff;
+	wrbuf[2] = off >> 8;
+	w1_write_block(sl->master, wrbuf, 3);
+	w1_read_block(sl->master, &data->memory[off], W1_PAGE_SIZE);
+
+	/* cache the block if the CRC is valid */
+	if (crc16(CRC16_INIT, &data->memory[off], W1_PAGE_SIZE) == CRC16_VALID)
+		data->validcrc |= (1 << block);
+
+	return 0;
+}
+
+static int w1_f1C_read(struct w1_slave *sl, int addr, int len, char *data)
+{
+	u8 wrbuf[3];
+
+	/* read directly from the EEPROM */
+	if (w1_reset_select_slave(sl))
+		return -EIO;
+
+	wrbuf[0] = W1_F1C_READ_EEPROM;
+	wrbuf[1] = addr & 0xff;
+	wrbuf[2] = addr >> 8;
+
+	w1_write_block(sl->master, wrbuf, sizeof(wrbuf));
+	return w1_read_block(sl->master, data, len);
+}
+
+static ssize_t w1_f1C_read_bin(struct file *filp, struct kobject *kobj,
+			       struct bin_attribute *bin_attr,
+			       char *buf, loff_t off, size_t count)
+{
+	struct w1_slave *sl = kobj_to_w1_slave(kobj);
+	struct w1_f1C_data *data = sl->family_data;
+	int i, min_page, max_page;
+
+	count = w1_f1C_fix_count(off, count, W1_EEPROM_SIZE);
+	if (count == 0)
+		return 0;
+
+	mutex_lock(&sl->master->mutex);
+
+	if (w1_enable_crccheck) {
+		min_page = (off >> W1_PAGE_BITS);
+		max_page = (off + count - 1) >> W1_PAGE_BITS;
+		for (i = min_page; i <= max_page; i++) {
+			if (w1_f1C_refresh_block(sl, data, i)) {
+				count = -EIO;
+				goto out_up;
+			}
+		}
+		memcpy(buf, &data->memory[off], count);
+	} else {
+		count = w1_f1C_read(sl, off, count, buf);
+	}
+
+out_up:
+	mutex_unlock(&sl->master->mutex);
+
+	return count;
+}
+
+/**
+ * Writes to the scratchpad and reads it back for verification.
+ * Then copies the scratchpad to EEPROM.
+ * The data must be on one page.
+ * The master must be locked.
+ *
+ * @param sl	The slave structure
+ * @param addr	Address for the write
+ * @param len   length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK))
+ * @param data	The data to write
+ * @return	0=Success -1=failure
+ */
+static int w1_f1C_write(struct w1_slave *sl, int addr, int len, const u8 *data)
+{
+	u8 wrbuf[4];
+	u8 rdbuf[W1_PAGE_SIZE + 3];
+	u8 es = (addr + len - 1) & 0x1f;
+	unsigned int tm = 10;
+	int i;
+	struct w1_f1C_data *f1C = sl->family_data;
+
+	/* Write the data to the scratchpad */
+	if (w1_reset_select_slave(sl))
+		return -1;
+
+	wrbuf[0] = W1_F1C_WRITE_SCRATCH;
+	wrbuf[1] = addr & 0xff;
+	wrbuf[2] = addr >> 8;
+
+	w1_write_block(sl->master, wrbuf, 3);
+	w1_write_block(sl->master, data, len);
+
+	/* Read the scratchpad and verify */
+	if (w1_reset_select_slave(sl))
+		return -1;
+
+	w1_write_8(sl->master, W1_F1C_READ_SCRATCH);
+	w1_read_block(sl->master, rdbuf, len + 3);
+
+	/* Compare what was read against the data written */
+	if ((rdbuf[0] != wrbuf[1]) || (rdbuf[1] != wrbuf[2]) ||
+	    (rdbuf[2] != es) || (memcmp(data, &rdbuf[3], len) != 0))
+		return -1;
+
+	/* Copy the scratchpad to EEPROM */
+	if (w1_reset_select_slave(sl))
+		return -1;
+
+	wrbuf[0] = W1_F1C_COPY_SCRATCH;
+	wrbuf[3] = es;
+
+	for (i = 0; i < sizeof(wrbuf); ++i) {
+		/* issue 10ms strong pullup (or delay) on the last byte
+		   for writing the data from the scratchpad to EEPROM */
+		if (w1_strong_pullup && i == sizeof(wrbuf)-1)
+			w1_next_pullup(sl->master, tm);
+
+		w1_write_8(sl->master, wrbuf[i]);
+	}
+
+	if (!w1_strong_pullup)
+		msleep(tm);
+
+	if (w1_enable_crccheck) {
+		/* invalidate cached data */
+		f1C->validcrc &= ~(1 << (addr >> W1_PAGE_BITS));
+	}
+
+	/* Reset the bus to wake up the EEPROM (this may not be needed) */
+	w1_reset_bus(sl->master);
+
+	return 0;
+}
+
+static ssize_t w1_f1C_write_bin(struct file *filp, struct kobject *kobj,
+			       struct bin_attribute *bin_attr,
+			       char *buf, loff_t off, size_t count)
+
+{
+	struct w1_slave *sl = kobj_to_w1_slave(kobj);
+	int addr, len, idx;
+
+	count = w1_f1C_fix_count(off, count, W1_EEPROM_SIZE);
+	if (count == 0)
+		return 0;
+
+	if (w1_enable_crccheck) {
+		/* can only write full blocks in cached mode */
+		if ((off & W1_PAGE_MASK) || (count & W1_PAGE_MASK)) {
+			dev_err(&sl->dev, "invalid offset/count off=%d cnt=%zd\n",
+				(int)off, count);
+			return -EINVAL;
+		}
+
+		/* make sure the block CRCs are valid */
+		for (idx = 0; idx < count; idx += W1_PAGE_SIZE) {
+			if (crc16(CRC16_INIT, &buf[idx], W1_PAGE_SIZE)
+				!= CRC16_VALID) {
+				dev_err(&sl->dev, "bad CRC at offset %d\n",
+					(int)off);
+				return -EINVAL;
+			}
+		}
+	}
+
+	mutex_lock(&sl->master->mutex);
+
+	/* Can only write data to one page at a time */
+	idx = 0;
+	while (idx < count) {
+		addr = off + idx;
+		len = W1_PAGE_SIZE - (addr & W1_PAGE_MASK);
+		if (len > (count - idx))
+			len = count - idx;
+
+		if (w1_f1C_write(sl, addr, len, &buf[idx]) < 0) {
+			count = -EIO;
+			goto out_up;
+		}
+		idx += len;
+	}
+
+out_up:
+	mutex_unlock(&sl->master->mutex);
+
+	return count;
+}
+
+static ssize_t w1_f1C_read_pio(struct file *filp, struct kobject *kobj,
+			       struct bin_attribute *bin_attr,
+			       char *buf, loff_t off, size_t count)
+
+{
+	struct w1_slave *sl = kobj_to_w1_slave(kobj);
+	int ret;
+
+	/* check arguments */
+	if (off != 0 || count != 1 || buf == NULL)
+		return -EINVAL;
+
+	mutex_lock(&sl->master->mutex);
+	ret = w1_f1C_read(sl, W1_1C_REG_LOGIC_STATE, count, buf);
+	mutex_unlock(&sl->master->mutex);
+
+	return ret;
+}
+
+static ssize_t w1_f1C_write_pio(struct file *filp, struct kobject *kobj,
+				struct bin_attribute *bin_attr,
+				char *buf, loff_t off, size_t count)
+
+{
+	struct w1_slave *sl = kobj_to_w1_slave(kobj);
+	u8 wrbuf[3];
+	u8 ack;
+
+	/* check arguments */
+	if (off != 0 || count != 1 || buf == NULL)
+		return -EINVAL;
+
+	mutex_lock(&sl->master->mutex);
+
+	/* Write the PIO data */
+	if (w1_reset_select_slave(sl)) {
+		mutex_unlock(&sl->master->mutex);
+		return -1;
+	}
+
+	/* set bit 7..2 to value '1' */
+	*buf = *buf | 0xFC;
+
+	wrbuf[0] = W1_F1C_ACCESS_WRITE;
+	wrbuf[1] = *buf;
+	wrbuf[2] = ~(*buf);
+	w1_write_block(sl->master, wrbuf, 3);
+
+	w1_read_block(sl->master, &ack, sizeof(ack));
+
+	mutex_unlock(&sl->master->mutex);
+
+	/* check for acknowledgement */
+	if (ack != 0xAA)
+		return -EIO;
+
+	return count;
+}
+
+static ssize_t w1_f1C_show_crccheck(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	if (put_user(w1_enable_crccheck + 0x30, buf))
+		return -EFAULT;
+
+	return sizeof(w1_enable_crccheck);
+}
+
+static ssize_t w1_f1C_store_crccheck(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	char val;
+
+	if (count != 1 || !buf)
+		return -EINVAL;
+
+	if (get_user(val, buf))
+		return -EFAULT;
+
+	/* convert to decimal */
+	val = val - 0x30;
+	if (val != 0 && val != 1)
+		return -EINVAL;
+
+	/* set the new value */
+	w1_enable_crccheck = val;
+
+	return sizeof(w1_enable_crccheck);
+}
+
+#define NB_SYSFS_BIN_FILES 2
+static struct bin_attribute w1_f1C_bin_attr[NB_SYSFS_BIN_FILES] = {
+	{
+		.attr = {
+			.name = "eeprom",
+			.mode = S_IRUGO | S_IWUSR,
+		},
+		.size = W1_EEPROM_SIZE,
+		.read = w1_f1C_read_bin,
+		.write = w1_f1C_write_bin,
+	},
+	{
+		.attr = {
+			.name = "pio",
+			.mode = S_IRUGO | S_IWUSR,
+		},
+		.size = 1,
+		.read = w1_f1C_read_pio,
+		.write = w1_f1C_write_pio,
+	}
+};
+
+static DEVICE_ATTR(crccheck, S_IWUSR | S_IRUGO,
+		   w1_f1C_show_crccheck, w1_f1C_store_crccheck);
+
+static int w1_f1C_add_slave(struct w1_slave *sl)
+{
+	int err = 0;
+	int i;
+	struct w1_f1C_data *data = NULL;
+
+	if (w1_enable_crccheck) {
+		data = kzalloc(sizeof(struct w1_f1C_data), GFP_KERNEL);
+		if (!data)
+			return -ENOMEM;
+		sl->family_data = data;
+	}
+
+	/* create binary sysfs attributes */
+	for (i = 0; i < NB_SYSFS_BIN_FILES && !err; ++i)
+		err = sysfs_create_bin_file(
+			&sl->dev.kobj, &(w1_f1C_bin_attr[i]));
+
+	if (!err) {
+		/* create device attributes */
+		err = device_create_file(&sl->dev, &dev_attr_crccheck);
+	}
+
+	if (err) {
+		/* remove binary sysfs attributes */
+		for (i = 0; i < NB_SYSFS_BIN_FILES; ++i)
+			sysfs_remove_bin_file(
+				&sl->dev.kobj, &(w1_f1C_bin_attr[i]));
+
+		kfree(data);
+	}
+
+	return err;
+}
+
+static void w1_f1C_remove_slave(struct w1_slave *sl)
+{
+	int i;
+
+	kfree(sl->family_data);
+	sl->family_data = NULL;
+
+	/* remove device attributes */
+	device_remove_file(&sl->dev, &dev_attr_crccheck);
+
+	/* remove binary sysfs attributes */
+	for (i = 0; i < NB_SYSFS_BIN_FILES; ++i)
+		sysfs_remove_bin_file(&sl->dev.kobj, &(w1_f1C_bin_attr[i]));
+}
+
+static struct w1_family_ops w1_f1C_fops = {
+	.add_slave      = w1_f1C_add_slave,
+	.remove_slave   = w1_f1C_remove_slave,
+};
+
+static struct w1_family w1_family_1C = {
+	.fid = W1_FAMILY_DS28E04,
+	.fops = &w1_f1C_fops,
+};
+
+static int __init w1_f1C_init(void)
+{
+	return w1_register_family(&w1_family_1C);
+}
+
+static void __exit w1_f1C_fini(void)
+{
+	w1_unregister_family(&w1_family_1C);
+}
+
+module_init(w1_f1C_init);
+module_exit(w1_f1C_fini);
diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index ff29ae747ee..d90062b211f 100644
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -179,7 +179,7 @@ static ssize_t w1_therm_read(struct device *device,
 	int i, max_trying = 10;
 	ssize_t c = PAGE_SIZE;
 
-	i = mutex_lock_interruptible(&dev->mutex);
+	i = mutex_lock_interruptible(&dev->bus_mutex);
 	if (i != 0)
 		return i;
 
@@ -207,19 +207,19 @@ static ssize_t w1_therm_read(struct device *device,
 			w1_write_8(dev, W1_CONVERT_TEMP);
 
 			if (external_power) {
-				mutex_unlock(&dev->mutex);
+				mutex_unlock(&dev->bus_mutex);
 
 				sleep_rem = msleep_interruptible(tm);
 				if (sleep_rem != 0)
 					return -EINTR;
 
-				i = mutex_lock_interruptible(&dev->mutex);
+				i = mutex_lock_interruptible(&dev->bus_mutex);
 				if (i != 0)
 					return i;
 			} else if (!w1_strong_pullup) {
 				sleep_rem = msleep_interruptible(tm);
 				if (sleep_rem != 0) {
-					mutex_unlock(&dev->mutex);
+					mutex_unlock(&dev->bus_mutex);
 					return -EINTR;
 				}
 			}
@@ -258,7 +258,7 @@ static ssize_t w1_therm_read(struct device *device,
 
 	c -= snprintf(buf + PAGE_SIZE - c, c, "t=%d\n",
 		w1_convert_temp(rom, sl->family->fid));
-	mutex_unlock(&dev->mutex);
+	mutex_unlock(&dev->bus_mutex);
 
 	return PAGE_SIZE - c;
 }
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 2f2e894ea0c..1a574370d2c 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -557,7 +557,7 @@ static int w1_uevent(struct device *dev, struct kobj_uevent_env *env)
 	struct w1_master *md = NULL;
 	struct w1_slave *sl = NULL;
 	char *event_owner, *name;
-	int err;
+	int err = 0;
 
 	if (dev->driver == &w1_master_driver) {
 		md = container_of(dev, struct w1_master, dev);
@@ -576,19 +576,17 @@ static int w1_uevent(struct device *dev, struct kobj_uevent_env *env)
 			event_owner, name, dev_name(dev));
 
 	if (dev->driver != &w1_slave_driver || !sl)
-		return 0;
+		goto end;
 
 	err = add_uevent_var(env, "W1_FID=%02X", sl->reg_num.family);
 	if (err)
-		return err;
+		goto end;
 
 	err = add_uevent_var(env, "W1_SLAVE_ID=%024LX",
 			     (unsigned long long)sl->reg_num.id);
-	if (err)
-		return err;
-
-	return 0;
-};
+end:
+	return err;
+}
 #else
 static int w1_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
@@ -887,16 +885,21 @@ void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb
 		 *
 		 * Return 0 - device(s) present, 1 - no devices present.
 		 */
+		mutex_lock(&dev->bus_mutex);
 		if (w1_reset_bus(dev)) {
+			mutex_unlock(&dev->bus_mutex);
 			dev_dbg(&dev->dev, "No devices present on the wire.\n");
 			break;
 		}
 
 		/* Do fast search on single slave bus */
 		if (dev->max_slave_count == 1) {
+			int rv;
 			w1_write_8(dev, W1_READ_ROM);
+			rv = w1_read_block(dev, (u8 *)&rn, 8);
+			mutex_unlock(&dev->bus_mutex);
 
-			if (w1_read_block(dev, (u8 *)&rn, 8) == 8 && rn)
+			if (rv == 8 && rn)
 				cb(dev, rn);
 
 			break;
@@ -929,10 +932,12 @@ void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb
 			rn |= (tmp64 << i);
 
 			if (kthread_should_stop()) {
+				mutex_unlock(&dev->bus_mutex);
 				dev_dbg(&dev->dev, "Abort w1_search\n");
 				return;
 			}
 		}
+		mutex_unlock(&dev->bus_mutex);
 
 		if ( (triplet_ret & 0x03) != 0x03 ) {
 			if ( (desc_bit == last_zero) || (last_zero < 0))
diff --git a/drivers/w1/w1.h b/drivers/w1/w1.h
index 4d012ca3f32..45908e56c2f 100644
--- a/drivers/w1/w1.h
+++ b/drivers/w1/w1.h
@@ -180,6 +180,7 @@ struct w1_master
 
 	struct task_struct	*thread;
 	struct mutex		mutex;
+	struct mutex		bus_mutex;
 
 	struct device_driver	*driver;
 	struct device		dev;
diff --git a/drivers/w1/w1_family.h b/drivers/w1/w1_family.h
index 874aeb05011..b00ada44a89 100644
--- a/drivers/w1/w1_family.h
+++ b/drivers/w1/w1_family.h
@@ -30,6 +30,7 @@
 #define W1_FAMILY_SMEM_01	0x01
 #define W1_FAMILY_SMEM_81	0x81
 #define W1_THERM_DS18S20 	0x10
+#define W1_FAMILY_DS28E04	0x1C
 #define W1_COUNTER_DS2423	0x1D
 #define W1_THERM_DS1822  	0x22
 #define W1_EEPROM_DS2433  	0x23
diff --git a/drivers/w1/w1_int.c b/drivers/w1/w1_int.c
index 68288355727..5a98649f6ab 100644
--- a/drivers/w1/w1_int.c
+++ b/drivers/w1/w1_int.c
@@ -76,6 +76,7 @@ static struct w1_master * w1_alloc_dev(u32 id, int slave_count, int slave_ttl,
 
 	INIT_LIST_HEAD(&dev->slist);
 	mutex_init(&dev->mutex);
+	mutex_init(&dev->bus_mutex);
 
 	memcpy(&dev->dev, device, sizeof(struct device));
 	dev_set_name(&dev->dev, "w1_bus_master%u", dev->id);
@@ -117,7 +118,7 @@ int w1_add_master_device(struct w1_bus_master *master)
 		return(-EINVAL);
         }
 	/* While it would be electrically possible to make a device that
-	 * generated a strong pullup in bit bang mode, only hardare that
+	 * generated a strong pullup in bit bang mode, only hardware that
 	 * controls 1-wire time frames are even expected to support a strong
 	 * pullup.  w1_io.c would need to support calling set_pullup before
 	 * the last write_bit operation of a w1_write_8 which it currently