Merge branch 'linus' into x86/apic

Conflicts:
	arch/x86/mach-default/setup.c

Semantic conflict resolution:
	arch/x86/kernel/setup.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

5 files changed, 46 insertions, 28 deletions

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 09a3d5522b4..325c10ff6a2 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -406,7 +406,7 @@ config ITCO_WDT
 	---help---
 	  Hardware driver for the intel TCO timer based watchdog devices.
 	  These drivers are included in the Intel 82801 I/O Controller
-	  Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB
+	  Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
 	  controller hub.
 
 	  The TCO (Total Cost of Ownership) timer is a watchdog timer
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 5531691f46e..e35d5458923 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -107,10 +107,10 @@ static int at91_wdt_close(struct inode *inode, struct file *file)
 static int at91_wdt_settimeout(int new_time)
 {
 	/*
-	 * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz
+	 * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
 	 *
 	 * Since WDV is a 16-bit counter, the maximum period is
-	 * 65536 / 0.256 = 256 seconds.
+	 * 65536 / 256 = 256 seconds.
 	 */
 	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
 		return -EINVAL;
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
index b1da287f90e..a56ac84381b 100644
--- a/drivers/watchdog/at91sam9_wdt.c
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -18,6 +18,7 @@
 #include <linux/errno.h>
 #include <linux/fs.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c
index 2474ebca88f..d8264ad0be4 100644
--- a/drivers/watchdog/iTCO_vendor_support.c
+++ b/drivers/watchdog/iTCO_vendor_support.c
@@ -1,7 +1,7 @@
 /*
  *	intel TCO vendor specific watchdog driver support
  *
- *	(c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
+ *	(c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -19,7 +19,7 @@
 
 /* Module and version information */
 #define DRV_NAME	"iTCO_vendor_support"
-#define DRV_VERSION	"1.02"
+#define DRV_VERSION	"1.03"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -77,6 +77,26 @@ MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (n
  *	    20.6 seconds.
  */
 
+static void supermicro_old_pre_start(unsigned long acpibase)
+{
+	unsigned long val32;
+
+	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+	val32 = inl(SMI_EN);
+	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
+	outl(val32, SMI_EN);	/* Needed to activate watchdog */
+}
+
+static void supermicro_old_pre_stop(unsigned long acpibase)
+{
+	unsigned long val32;
+
+	/* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
+	val32 = inl(SMI_EN);
+	val32 |= 0x00002000;	/* Turn on SMI clearing watchdog */
+	outl(val32, SMI_EN);	/* Needed to deactivate watchdog */
+}
+
 static void supermicro_old_pre_keepalive(unsigned long acpibase)
 {
 	/* Reload TCO Timer (done in iTCO_wdt_keepalive) + */
@@ -228,14 +248,18 @@ static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
 void iTCO_vendor_pre_start(unsigned long acpibase,
 			   unsigned int heartbeat)
 {
-	if (vendorsupport == SUPERMICRO_NEW_BOARD)
+	if (vendorsupport == SUPERMICRO_OLD_BOARD)
+		supermicro_old_pre_start(acpibase);
+	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
 		supermicro_new_pre_start(heartbeat);
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_start);
 
 void iTCO_vendor_pre_stop(unsigned long acpibase)
 {
-	if (vendorsupport == SUPERMICRO_NEW_BOARD)
+	if (vendorsupport == SUPERMICRO_OLD_BOARD)
+		supermicro_old_pre_stop(acpibase);
+	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
 		supermicro_new_pre_stop();
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_stop);
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 5b395a4ddfd..352334947ea 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -1,7 +1,7 @@
 /*
- *	intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets)
+ *	intel TCO Watchdog Driver (Used in i82801 and i63xxESB chipsets)
  *
- *	(c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
+ *	(c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -63,7 +63,7 @@
 
 /* Module and version information */
 #define DRV_NAME	"iTCO_wdt"
-#define DRV_VERSION	"1.04"
+#define DRV_VERSION	"1.05"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -236,16 +236,16 @@ MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
 
 /* Address definitions for the TCO */
 /* TCO base address */
-#define	TCOBASE		iTCO_wdt_private.ACPIBASE + 0x60
+#define TCOBASE		iTCO_wdt_private.ACPIBASE + 0x60
 /* SMI Control and Enable Register */
-#define	SMI_EN		iTCO_wdt_private.ACPIBASE + 0x30
+#define SMI_EN		iTCO_wdt_private.ACPIBASE + 0x30
 
 #define TCO_RLD		TCOBASE + 0x00	/* TCO Timer Reload and Curr. Value */
 #define TCOv1_TMR	TCOBASE + 0x01	/* TCOv1 Timer Initial Value	*/
-#define	TCO_DAT_IN	TCOBASE + 0x02	/* TCO Data In Register		*/
-#define	TCO_DAT_OUT	TCOBASE + 0x03	/* TCO Data Out Register	*/
-#define	TCO1_STS	TCOBASE + 0x04	/* TCO1 Status Register		*/
-#define	TCO2_STS	TCOBASE + 0x06	/* TCO2 Status Register		*/
+#define TCO_DAT_IN	TCOBASE + 0x02	/* TCO Data In Register		*/
+#define TCO_DAT_OUT	TCOBASE + 0x03	/* TCO Data Out Register	*/
+#define TCO1_STS	TCOBASE + 0x04	/* TCO1 Status Register		*/
+#define TCO2_STS	TCOBASE + 0x06	/* TCO2 Status Register		*/
 #define TCO1_CNT	TCOBASE + 0x08	/* TCO1 Control Register	*/
 #define TCO2_CNT	TCOBASE + 0x0a	/* TCO2 Control Register	*/
 #define TCOv2_TMR	TCOBASE + 0x12	/* TCOv2 Timer Initial Value	*/
@@ -338,7 +338,6 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void)
 static int iTCO_wdt_start(void)
 {
 	unsigned int val;
-	unsigned long val32;
 
 	spin_lock(&iTCO_wdt_private.io_lock);
 
@@ -351,11 +350,6 @@ static int iTCO_wdt_start(void)
 		return -EIO;
 	}
 
-	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
-	val32 = inl(SMI_EN);
-	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
-	outl(val32, SMI_EN);
-
 	/* Force the timer to its reload value by writing to the TCO_RLD
 	   register */
 	if (iTCO_wdt_private.iTCO_version == 2)
@@ -378,7 +372,6 @@ static int iTCO_wdt_start(void)
 static int iTCO_wdt_stop(void)
 {
 	unsigned int val;
-	unsigned long val32;
 
 	spin_lock(&iTCO_wdt_private.io_lock);
 
@@ -390,11 +383,6 @@ static int iTCO_wdt_stop(void)
 	outw(val, TCO1_CNT);
 	val = inw(TCO1_CNT);
 
-	/* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
-	val32 = inl(SMI_EN);
-	val32 |= 0x00002000;
-	outl(val32, SMI_EN);
-
 	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
 	iTCO_wdt_set_NO_REBOOT_bit();
 
@@ -649,6 +637,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 	int ret;
 	u32 base_address;
 	unsigned long RCBA;
+	unsigned long val32;
 
 	/*
 	 *      Find the ACPI/PM base I/O address which is the base
@@ -695,6 +684,10 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 		ret = -EIO;
 		goto out;
 	}
+	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+	val32 = inl(SMI_EN);
+	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
+	outl(val32, SMI_EN);
 
 	/* The TCO I/O registers reside in a 32-byte range pointed to
 	   by the TCOBASE value */