Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel

Conflicts:

	arch/arm/mach-at91/gpio.c

9 files changed, 118 insertions, 128 deletions

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 09a3d5522b4..325c10ff6a2 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -406,7 +406,7 @@ config ITCO_WDT
 	---help---
 	  Hardware driver for the intel TCO timer based watchdog devices.
 	  These drivers are included in the Intel 82801 I/O Controller
-	  Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB
+	  Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
 	  controller hub.
 
 	  The TCO (Total Cost of Ownership) timer is a watchdog timer
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 5531691f46e..e35d5458923 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -107,10 +107,10 @@ static int at91_wdt_close(struct inode *inode, struct file *file)
 static int at91_wdt_settimeout(int new_time)
 {
 	/*
-	 * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz
+	 * All counting occurs at SLOW_CLOCK / 128 = 256 Hz
 	 *
 	 * Since WDV is a 16-bit counter, the maximum period is
-	 * 65536 / 0.256 = 256 seconds.
+	 * 65536 / 256 = 256 seconds.
 	 */
 	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
 		return -EINVAL;
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
index b1da287f90e..a56ac84381b 100644
--- a/drivers/watchdog/at91sam9_wdt.c
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -18,6 +18,7 @@
 #include <linux/errno.h>
 #include <linux/fs.h>
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index f0c2b7a1a17..734d9806a87 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -269,7 +269,7 @@ static int __devinit gef_wdt_probe(struct of_device *dev,
 	bus_clk = 133; /* in MHz */
 
 	freq = fsl_get_sys_freq();
-	if (freq > 0)
+	if (freq != -1)
 		bus_clk = freq;
 
 	/* Map devices registers into memory */
diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c
index 2474ebca88f..d8264ad0be4 100644
--- a/drivers/watchdog/iTCO_vendor_support.c
+++ b/drivers/watchdog/iTCO_vendor_support.c
@@ -1,7 +1,7 @@
 /*
  *	intel TCO vendor specific watchdog driver support
  *
- *	(c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
+ *	(c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -19,7 +19,7 @@
 
 /* Module and version information */
 #define DRV_NAME	"iTCO_vendor_support"
-#define DRV_VERSION	"1.02"
+#define DRV_VERSION	"1.03"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -77,6 +77,26 @@ MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (n
  *	    20.6 seconds.
  */
 
+static void supermicro_old_pre_start(unsigned long acpibase)
+{
+	unsigned long val32;
+
+	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+	val32 = inl(SMI_EN);
+	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
+	outl(val32, SMI_EN);	/* Needed to activate watchdog */
+}
+
+static void supermicro_old_pre_stop(unsigned long acpibase)
+{
+	unsigned long val32;
+
+	/* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
+	val32 = inl(SMI_EN);
+	val32 |= 0x00002000;	/* Turn on SMI clearing watchdog */
+	outl(val32, SMI_EN);	/* Needed to deactivate watchdog */
+}
+
 static void supermicro_old_pre_keepalive(unsigned long acpibase)
 {
 	/* Reload TCO Timer (done in iTCO_wdt_keepalive) + */
@@ -228,14 +248,18 @@ static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
 void iTCO_vendor_pre_start(unsigned long acpibase,
 			   unsigned int heartbeat)
 {
-	if (vendorsupport == SUPERMICRO_NEW_BOARD)
+	if (vendorsupport == SUPERMICRO_OLD_BOARD)
+		supermicro_old_pre_start(acpibase);
+	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
 		supermicro_new_pre_start(heartbeat);
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_start);
 
 void iTCO_vendor_pre_stop(unsigned long acpibase)
 {
-	if (vendorsupport == SUPERMICRO_NEW_BOARD)
+	if (vendorsupport == SUPERMICRO_OLD_BOARD)
+		supermicro_old_pre_stop(acpibase);
+	else if (vendorsupport == SUPERMICRO_NEW_BOARD)
 		supermicro_new_pre_stop();
 }
 EXPORT_SYMBOL(iTCO_vendor_pre_stop);
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 5b395a4ddfd..352334947ea 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -1,7 +1,7 @@
 /*
- *	intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets)
+ *	intel TCO Watchdog Driver (Used in i82801 and i63xxESB chipsets)
  *
- *	(c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
+ *	(c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
  *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License
@@ -63,7 +63,7 @@
 
 /* Module and version information */
 #define DRV_NAME	"iTCO_wdt"
-#define DRV_VERSION	"1.04"
+#define DRV_VERSION	"1.05"
 #define PFX		DRV_NAME ": "
 
 /* Includes */
@@ -236,16 +236,16 @@ MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
 
 /* Address definitions for the TCO */
 /* TCO base address */
-#define	TCOBASE		iTCO_wdt_private.ACPIBASE + 0x60
+#define TCOBASE		iTCO_wdt_private.ACPIBASE + 0x60
 /* SMI Control and Enable Register */
-#define	SMI_EN		iTCO_wdt_private.ACPIBASE + 0x30
+#define SMI_EN		iTCO_wdt_private.ACPIBASE + 0x30
 
 #define TCO_RLD		TCOBASE + 0x00	/* TCO Timer Reload and Curr. Value */
 #define TCOv1_TMR	TCOBASE + 0x01	/* TCOv1 Timer Initial Value	*/
-#define	TCO_DAT_IN	TCOBASE + 0x02	/* TCO Data In Register		*/
-#define	TCO_DAT_OUT	TCOBASE + 0x03	/* TCO Data Out Register	*/
-#define	TCO1_STS	TCOBASE + 0x04	/* TCO1 Status Register		*/
-#define	TCO2_STS	TCOBASE + 0x06	/* TCO2 Status Register		*/
+#define TCO_DAT_IN	TCOBASE + 0x02	/* TCO Data In Register		*/
+#define TCO_DAT_OUT	TCOBASE + 0x03	/* TCO Data Out Register	*/
+#define TCO1_STS	TCOBASE + 0x04	/* TCO1 Status Register		*/
+#define TCO2_STS	TCOBASE + 0x06	/* TCO2 Status Register		*/
 #define TCO1_CNT	TCOBASE + 0x08	/* TCO1 Control Register	*/
 #define TCO2_CNT	TCOBASE + 0x0a	/* TCO2 Control Register	*/
 #define TCOv2_TMR	TCOBASE + 0x12	/* TCOv2 Timer Initial Value	*/
@@ -338,7 +338,6 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void)
 static int iTCO_wdt_start(void)
 {
 	unsigned int val;
-	unsigned long val32;
 
 	spin_lock(&iTCO_wdt_private.io_lock);
 
@@ -351,11 +350,6 @@ static int iTCO_wdt_start(void)
 		return -EIO;
 	}
 
-	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
-	val32 = inl(SMI_EN);
-	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
-	outl(val32, SMI_EN);
-
 	/* Force the timer to its reload value by writing to the TCO_RLD
 	   register */
 	if (iTCO_wdt_private.iTCO_version == 2)
@@ -378,7 +372,6 @@ static int iTCO_wdt_start(void)
 static int iTCO_wdt_stop(void)
 {
 	unsigned int val;
-	unsigned long val32;
 
 	spin_lock(&iTCO_wdt_private.io_lock);
 
@@ -390,11 +383,6 @@ static int iTCO_wdt_stop(void)
 	outw(val, TCO1_CNT);
 	val = inw(TCO1_CNT);
 
-	/* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
-	val32 = inl(SMI_EN);
-	val32 |= 0x00002000;
-	outl(val32, SMI_EN);
-
 	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
 	iTCO_wdt_set_NO_REBOOT_bit();
 
@@ -649,6 +637,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 	int ret;
 	u32 base_address;
 	unsigned long RCBA;
+	unsigned long val32;
 
 	/*
 	 *      Find the ACPI/PM base I/O address which is the base
@@ -695,6 +684,10 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
 		ret = -EIO;
 		goto out;
 	}
+	/* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+	val32 = inl(SMI_EN);
+	val32 &= 0xffffdfff;	/* Turn off SMI clearing watchdog */
+	outl(val32, SMI_EN);
 
 	/* The TCO I/O registers reside in a 32-byte range pointed to
 	   by the TCOBASE value */
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index 0b798fdaa37..74c92d38411 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -21,6 +21,7 @@
 #include <linux/watchdog.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
+#include <mach/timex.h>
 #include <mach/regs-timer.h>
 
 #define WDT_DEFAULT_TIME	5	/* seconds */
diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion5x_wdt.c
index 14a339f58b6..b64ae1a1783 100644
--- a/drivers/watchdog/orion5x_wdt.c
+++ b/drivers/watchdog/orion5x_wdt.c
@@ -29,6 +29,7 @@
 #define  WDT_EN			0x0010
 #define WDT_VAL			(TIMER_VIRT_BASE + 0x0024)
 
+#define ORION5X_TCLK		166666667
 #define WDT_MAX_DURATION	(0xffffffff / ORION5X_TCLK)
 #define WDT_IN_USE		0
 #define WDT_OK_TO_CLOSE		1
diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
index 57027f4653c..f3553fa40b1 100644
--- a/drivers/watchdog/rc32434_wdt.c
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -34,104 +34,89 @@
 #include <asm/time.h>
 #include <asm/mach-rc32434/integ.h>
 
-#define MAX_TIMEOUT			20
-#define RC32434_WDT_INTERVAL		(15 * HZ)
-
-#define VERSION "0.2"
+#define VERSION "0.4"
 
 static struct {
-	struct completion stop;
-	int running;
-	struct timer_list timer;
-	int queue;
-	int default_ticks;
 	unsigned long inuse;
 } rc32434_wdt_device;
 
 static struct integ __iomem *wdt_reg;
-static int ticks = 100 * HZ;
 
 static int expect_close;
-static int timeout;
+
+/* Board internal clock speed in Hz,
+ * the watchdog timer ticks at. */
+extern unsigned int idt_cpu_freq;
+
+/* translate wtcompare value to seconds and vice versa */
+#define WTCOMP2SEC(x)	(x / idt_cpu_freq)
+#define SEC2WTCOMP(x)	(x * idt_cpu_freq)
+
+/* Use a default timeout of 20s. This should be
+ * safe for CPU clock speeds up to 400MHz, as
+ * ((2 ^ 32) - 1) / (400MHz / 2) = 21s.  */
+#define WATCHDOG_TIMEOUT 20
+
+static int timeout = WATCHDOG_TIMEOUT;
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
+/* apply or and nand masks to data read from addr and write back */
+#define SET_BITS(addr, or, nand) \
+	writel((readl(&addr) | or) & ~nand, &addr)
 
 static void rc32434_wdt_start(void)
 {
-	u32 val;
-
-	if (!rc32434_wdt_device.inuse) {
-		writel(0, &wdt_reg->wtcount);
+	u32 or, nand;
 
-		val = RC32434_ERR_WRE;
-		writel(readl(&wdt_reg->errcs) | val, &wdt_reg->errcs);
+	/* zero the counter before enabling */
+	writel(0, &wdt_reg->wtcount);
 
-		val = RC32434_WTC_EN;
-		writel(readl(&wdt_reg->wtc) | val, &wdt_reg->wtc);
-	}
-	rc32434_wdt_device.running++;
-}
+	/* don't generate a non-maskable interrupt,
+	 * do a warm reset instead */
+	nand = 1 << RC32434_ERR_WNE;
+	or = 1 << RC32434_ERR_WRE;
 
-static void rc32434_wdt_stop(void)
-{
-	u32 val;
+	/* reset the ERRCS timeout bit in case it's set */
+	nand |= 1 << RC32434_ERR_WTO;
 
-	if (rc32434_wdt_device.running) {
+	SET_BITS(wdt_reg->errcs, or, nand);
 
-		val = ~RC32434_WTC_EN;
-		writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
+	/* reset WTC timeout bit and enable WDT */
+	nand = 1 << RC32434_WTC_TO;
+	or = 1 << RC32434_WTC_EN;
 
-		val = ~RC32434_ERR_WRE;
-		writel(readl(&wdt_reg->errcs) & val, &wdt_reg->errcs);
+	SET_BITS(wdt_reg->wtc, or, nand);
+}
 
-		rc32434_wdt_device.running = 0;
-	}
+static void rc32434_wdt_stop(void)
+{
+	/* Disable WDT */
+	SET_BITS(wdt_reg->wtc, 0, 1 << RC32434_WTC_EN);
 }
 
-static void rc32434_wdt_set(int new_timeout)
+static int rc32434_wdt_set(int new_timeout)
 {
-	u32 cmp = new_timeout * HZ;
-	u32 state, val;
+	int max_to = WTCOMP2SEC((u32)-1);
 
+	if (new_timeout < 0 || new_timeout > max_to) {
+		printk(KERN_ERR KBUILD_MODNAME
+			": timeout value must be between 0 and %d",
+			max_to);
+		return -EINVAL;
+	}
 	timeout = new_timeout;
-	/*
-	 * store and disable WTC
-	 */
-	state = (u32)(readl(&wdt_reg->wtc) & RC32434_WTC_EN);
-	val = ~RC32434_WTC_EN;
-	writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
-
-	writel(0, &wdt_reg->wtcount);
-	writel(cmp, &wdt_reg->wtcompare);
-
-	/*
-	 * restore WTC
-	 */
-
-	writel(readl(&wdt_reg->wtc) | state, &wdt_reg);
-}
+	writel(SEC2WTCOMP(timeout), &wdt_reg->wtcompare);
 
-static void rc32434_wdt_reset(void)
-{
-	ticks = rc32434_wdt_device.default_ticks;
+	return 0;
 }
 
-static void rc32434_wdt_update(unsigned long unused)
+static void rc32434_wdt_ping(void)
 {
-	if (rc32434_wdt_device.running)
-		ticks--;
-
 	writel(0, &wdt_reg->wtcount);
-
-	if (rc32434_wdt_device.queue && ticks)
-		mod_timer(&rc32434_wdt_device.timer,
-			jiffies + RC32434_WDT_INTERVAL);
-	else
-		complete(&rc32434_wdt_device.stop);
 }
 
 static int rc32434_wdt_open(struct inode *inode, struct file *file)
@@ -142,19 +127,23 @@ static int rc32434_wdt_open(struct inode *inode, struct file *file)
 	if (nowayout)
 		__module_get(THIS_MODULE);
 
+	rc32434_wdt_start();
+	rc32434_wdt_ping();
+
 	return nonseekable_open(inode, file);
 }
 
 static int rc32434_wdt_release(struct inode *inode, struct file *file)
 {
-	if (expect_close && nowayout == 0) {
+	if (expect_close == 42) {
 		rc32434_wdt_stop();
 		printk(KERN_INFO KBUILD_MODNAME ": disabling watchdog timer\n");
 		module_put(THIS_MODULE);
-	} else
+	} else {
 		printk(KERN_CRIT KBUILD_MODNAME
 			": device closed unexpectedly. WDT will not stop !\n");
-
+		rc32434_wdt_ping();
+	}
 	clear_bit(0, &rc32434_wdt_device.inuse);
 	return 0;
 }
@@ -174,10 +163,10 @@ static ssize_t rc32434_wdt_write(struct file *file, const char *data,
 				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
-					expect_close = 1;
+					expect_close = 42;
 			}
 		}
-		rc32434_wdt_update(0);
+		rc32434_wdt_ping();
 		return len;
 	}
 	return 0;
@@ -197,11 +186,11 @@ static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd,
 	};
 	switch (cmd) {
 	case WDIOC_KEEPALIVE:
-		rc32434_wdt_reset();
+		rc32434_wdt_ping();
 		break;
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-		value = readl(&wdt_reg->wtcount);
+		value = 0;
 		if (copy_to_user(argp, &value, sizeof(int)))
 			return -EFAULT;
 		break;
@@ -218,6 +207,7 @@ static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd,
 			break;
 		case WDIOS_DISABLECARD:
 			rc32434_wdt_stop();
+			break;
 		default:
 			return -EINVAL;
 		}
@@ -225,11 +215,9 @@ static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd,
 	case WDIOC_SETTIMEOUT:
 		if (copy_from_user(&new_timeout, argp, sizeof(int)))
 			return -EFAULT;
-		if (new_timeout < 1)
+		if (rc32434_wdt_set(new_timeout))
 			return -EINVAL;
-		if (new_timeout > MAX_TIMEOUT)
-			return -EINVAL;
-		rc32434_wdt_set(new_timeout);
+		/* Fall through */
 	case WDIOC_GETTIMEOUT:
 		return copy_to_user(argp, &timeout, sizeof(int));
 	default:
@@ -254,15 +242,15 @@ static struct miscdevice rc32434_wdt_miscdev = {
 	.fops	= &rc32434_wdt_fops,
 };
 
-static char banner[] = KERN_INFO KBUILD_MODNAME
+static char banner[] __devinitdata = KERN_INFO KBUILD_MODNAME
 		": Watchdog Timer version " VERSION ", timer margin: %d sec\n";
 
-static int rc32434_wdt_probe(struct platform_device *pdev)
+static int __devinit rc32434_wdt_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct resource *r;
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res");
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res");
 	if (!r) {
 		printk(KERN_ERR KBUILD_MODNAME
 			"failed to retrieve resources\n");
@@ -277,24 +265,12 @@ static int rc32434_wdt_probe(struct platform_device *pdev)
 	}
 
 	ret = misc_register(&rc32434_wdt_miscdev);
-
 	if (ret < 0) {
 		printk(KERN_ERR KBUILD_MODNAME
 			"failed to register watchdog device\n");
 		goto unmap;
 	}
 
-	init_completion(&rc32434_wdt_device.stop);
-	rc32434_wdt_device.queue = 0;
-
-	clear_bit(0, &rc32434_wdt_device.inuse);
-
-	setup_timer(&rc32434_wdt_device.timer, rc32434_wdt_update, 0L);
-
-	rc32434_wdt_device.default_ticks = ticks;
-
-	rc32434_wdt_start();
-
 	printk(banner, timeout);
 
 	return 0;
@@ -304,23 +280,17 @@ unmap:
 	return ret;
 }
 
-static int rc32434_wdt_remove(struct platform_device *pdev)
+static int __devexit rc32434_wdt_remove(struct platform_device *pdev)
 {
-	if (rc32434_wdt_device.queue) {
-		rc32434_wdt_device.queue = 0;
-		wait_for_completion(&rc32434_wdt_device.stop);
-	}
 	misc_deregister(&rc32434_wdt_miscdev);
-
 	iounmap(wdt_reg);
-
 	return 0;
 }
 
 static struct platform_driver rc32434_wdt = {
 	.probe	= rc32434_wdt_probe,
-	.remove = rc32434_wdt_remove,
-	.driver = {
+	.remove	= __devexit_p(rc32434_wdt_remove),
+	.driver	= {
 		.name = "rc32434_wdt",
 	}
 };