Make the pr_*() family of macros in kernel.h complete

Other/Some pr_*() macros are already defined in kernel.h, but pr_err() was
defined multiple times in several other places

Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Tony Lindgren <tony@atomide.com>
Reviewed-by: Satyam Sharma <satyam@infradead.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

4 files changed, 8 insertions, 17 deletions

diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c
index d9c92c5e007..66436bae11a 100644
--- a/drivers/i2c/chips/menelaus.c
+++ b/drivers/i2c/chips/menelaus.c
@@ -49,8 +49,6 @@
 
 #define DRIVER_NAME			"menelaus"
 
-#define pr_err(fmt, arg...)	printk(KERN_ERR DRIVER_NAME ": ", ## arg);
-
 #define MENELAUS_I2C_ADDRESS		0x72
 
 #define MENELAUS_REV			0x01
@@ -155,7 +153,7 @@ static int menelaus_write_reg(int reg, u8 value)
 	int val = i2c_smbus_write_byte_data(the_menelaus->client, reg, value);
 
 	if (val < 0) {
-		pr_err("write error");
+		pr_err(DRIVER_NAME ": write error");
 		return val;
 	}
 
@@ -167,7 +165,7 @@ static int menelaus_read_reg(int reg)
 	int val = i2c_smbus_read_byte_data(the_menelaus->client, reg);
 
 	if (val < 0)
-		pr_err("read error");
+		pr_err(DRIVER_NAME ": read error");
 
 	return val;
 }
@@ -1177,7 +1175,7 @@ static int menelaus_probe(struct i2c_client *client)
 	/* If a true probe check the device */
 	rev = menelaus_read_reg(MENELAUS_REV);
 	if (rev < 0) {
-		pr_err("device not found");
+		pr_err(DRIVER_NAME ": device not found");
 		err = -ENODEV;
 		goto fail1;
 	}
@@ -1258,7 +1256,7 @@ static int __init menelaus_init(void)
 
 	res = i2c_add_driver(&menelaus_i2c_driver);
 	if (res < 0) {
-		pr_err("driver registration failed\n");
+		pr_err(DRIVER_NAME ": driver registration failed\n");
 		return res;
 	}
 
diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h
index a897beee7d5..e1d05c0f47e 100644
--- a/drivers/net/spider_net.h
+++ b/drivers/net/spider_net.h
@@ -494,7 +494,4 @@ struct spider_net_card {
 	struct spider_net_descr darray[0];
 };
 
-#define pr_err(fmt,arg...) \
-	printk(KERN_ERR fmt ,##arg)
-
 #endif
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
index 51807b4e26d..c604d935c18 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -28,8 +28,6 @@
 
 #define MODULE_NAME	"omapfb-lcd_h3"
 
-#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ": " fmt, ## args)
-
 static int h3_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
 {
 	return 0;
@@ -48,7 +46,7 @@ static int h3_panel_enable(struct lcd_panel *panel)
 	if (!r)
 		r = tps65010_set_gpio_out_value(GPIO2, HIGH);
 	if (r)
-		pr_err("Unable to turn on LCD panel\n");
+		pr_err(MODULE_NAME ": Unable to turn on LCD panel\n");
 
 	return r;
 }
@@ -62,7 +60,7 @@ static void h3_panel_disable(struct lcd_panel *panel)
 	if (!r)
 		tps65010_set_gpio_out_value(GPIO2, LOW);
 	if (r)
-		pr_err("Unable to turn off LCD panel\n");
+		pr_err(MODULE_NAME ": Unable to turn off LCD panel\n");
 }
 
 static unsigned long h3_panel_get_caps(struct lcd_panel *panel)
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 95604ca4330..5ef119c813e 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -27,20 +27,18 @@
 
 #define MODULE_NAME	"omapfb-lcd_h3"
 
-#define pr_err(fmt, args...) printk(KERN_ERR MODULE_NAME ": " fmt, ## args)
-
 static int innovator1610_panel_init(struct lcd_panel *panel,
 				    struct omapfb_device *fbdev)
 {
 	int r = 0;
 
 	if (omap_request_gpio(14)) {
-		pr_err("can't request GPIO 14\n");
+		pr_err(MODULE_NAME ": can't request GPIO 14\n");
 		r = -1;
 		goto exit;
 	}
 	if (omap_request_gpio(15)) {
-		pr_err("can't request GPIO 15\n");
+		pr_err(MODULE_NAME ": can't request GPIO 15\n");
 		omap_free_gpio(14);
 		r = -1;
 		goto exit;