diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-11-05 15:32:53 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-11-05 15:32:53 -0700 |
| commit | cd3f07d1e6e59fade92a8edaff9315cc534199cf (patch) | |
| tree | a2f30bccdfad1826a81c098c6766c2a4345fc171 /drivers | |
| parent | dc822e57ee05856291a8c9324d2309076ee5f5e2 (diff) | |
| parent | f7c9c6bb14f3104608a3a83cadea10a6943d2804 (diff) | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (45 commits)
[SCSI] Fix block queue and elevator memory leak in scsi_alloc_sdev
[SCSI] scsi_dh_alua: Fix the time inteval for alua rtpg commands
[SCSI] scsi_transport_iscsi: Fix documentation os parameter
[SCSI] mv_sas: OCZ RevoDrive3 & zDrive R4 support
[SCSI] libfc: improve flogi retries to avoid lport stuck
[SCSI] libfc: avoid exchanges collision during lport reset
[SCSI] libfc: fix checking FC_TYPE_BLS
[SCSI] edd: Treat "XPRS" host bus type the same as "PCI"
[SCSI] isci: overriding max_concurr_spinup oem parameter by max(oem, user)
[SCSI] isci: revert bcn filtering
[SCSI] isci: Fix hard reset timeout conditions.
[SCSI] isci: No need to manage the pending reset bit on pending requests.
[SCSI] isci: Remove redundant isci_request.ttype field.
[SCSI] isci: Fix task management for SMP, SATA and on dev remove.
[SCSI] isci: No task_done callbacks in error handler paths.
[SCSI] isci: Handle task request timeouts correctly.
[SCSI] isci: Fix tag leak in tasks and terminated requests.
[SCSI] isci: Immediately fail I/O to removed devices.
[SCSI] isci: Lookup device references through requests in completions.
[SCSI] ipr: add definitions for additional adapter
...
Diffstat (limited to 'drivers')
44 files changed, 1754 insertions, 1076 deletions
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index f1b7f659d3c..e2295766580 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -151,7 +151,8 @@ edd_show_host_bus(struct edd_device *edev, char *buf) p += scnprintf(p, left, "\tbase_address: %x\n", info->params.interface_path.isa.base_address); } else if (!strncmp(info->params.host_bus_type, "PCIX", 4) || - !strncmp(info->params.host_bus_type, "PCI", 3)) { + !strncmp(info->params.host_bus_type, "PCI", 3) || + !strncmp(info->params.host_bus_type, "XPRS", 4)) { p += scnprintf(p, left, "\t%02x:%02x.%d channel: %u\n", info->params.interface_path.pci.bus, @@ -159,7 +160,6 @@ edd_show_host_bus(struct edd_device *edev, char *buf) info->params.interface_path.pci.function, info->params.interface_path.pci.channel); } else if (!strncmp(info->params.host_bus_type, "IBND", 4) || - !strncmp(info->params.host_bus_type, "XPRS", 4) || !strncmp(info->params.host_bus_type, "HTPT", 4)) { p += scnprintf(p, left, "\tTBD: %llx\n", @@ -668,7 +668,7 @@ edd_get_pci_dev(struct edd_device *edev) { struct edd_info *info = edd_dev_get_info(edev); - if (edd_dev_is_type(edev, "PCI")) { + if (edd_dev_is_type(edev, "PCI") || edd_dev_is_type(edev, "XPRS")) { return pci_get_bus_and_slot(info->params.interface_path.pci.bus, PCI_DEVFN(info->params.interface_path.pci.slot, info->params.interface_path.pci. diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h index 63de1c7cd0c..049ea907e04 100644 --- a/drivers/scsi/bnx2fc/bnx2fc.h +++ b/drivers/scsi/bnx2fc/bnx2fc.h @@ -62,7 +62,7 @@ #include "bnx2fc_constants.h" #define BNX2FC_NAME "bnx2fc" -#define BNX2FC_VERSION "1.0.8" +#define BNX2FC_VERSION "1.0.9" #define PFX "bnx2fc: " @@ -145,6 +145,9 @@ #define REC_RETRY_COUNT 1 #define BNX2FC_NUM_ERR_BITS 63 +#define BNX2FC_RELOGIN_WAIT_TIME 200 +#define BNX2FC_RELOGIN_WAIT_CNT 10 + /* bnx2fc driver uses only one instance of fcoe_percpu_s */ extern struct fcoe_percpu_s bnx2fc_global; diff --git a/drivers/scsi/bnx2fc/bnx2fc_els.c b/drivers/scsi/bnx2fc/bnx2fc_els.c index fd382fe33f6..ce0ce3e32f3 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_els.c +++ b/drivers/scsi/bnx2fc/bnx2fc_els.c @@ -268,17 +268,6 @@ void bnx2fc_srr_compl(struct bnx2fc_els_cb_arg *cb_arg) orig_io_req = cb_arg->aborted_io_req; srr_req = cb_arg->io_req; - if (test_bit(BNX2FC_FLAG_IO_COMPL, &orig_io_req->req_flags)) { - BNX2FC_IO_DBG(srr_req, "srr_compl: xid - 0x%x completed", - orig_io_req->xid); - goto srr_compl_done; - } - if (test_bit(BNX2FC_FLAG_ISSUE_ABTS, &orig_io_req->req_flags)) { - BNX2FC_IO_DBG(srr_req, "rec abts in prog " - "orig_io - 0x%x\n", - orig_io_req->xid); - goto srr_compl_done; - } if (test_and_clear_bit(BNX2FC_FLAG_ELS_TIMEOUT, &srr_req->req_flags)) { /* SRR timedout */ BNX2FC_IO_DBG(srr_req, "srr timed out, abort " @@ -290,6 +279,12 @@ void bnx2fc_srr_compl(struct bnx2fc_els_cb_arg *cb_arg) "failed. issue cleanup\n"); bnx2fc_initiate_cleanup(srr_req); } + if (test_bit(BNX2FC_FLAG_IO_COMPL, &orig_io_req->req_flags) || + test_bit(BNX2FC_FLAG_ISSUE_ABTS, &orig_io_req->req_flags)) { + BNX2FC_IO_DBG(srr_req, "srr_compl:xid 0x%x flags = %lx", + orig_io_req->xid, orig_io_req->req_flags); + goto srr_compl_done; + } orig_io_req->srr_retry++; if (orig_io_req->srr_retry <= SRR_RETRY_COUNT) { struct bnx2fc_rport *tgt = orig_io_req->tgt; @@ -311,6 +306,12 @@ void bnx2fc_srr_compl(struct bnx2fc_els_cb_arg *cb_arg) } goto srr_compl_done; } + if (test_bit(BNX2FC_FLAG_IO_COMPL, &orig_io_req->req_flags) || + test_bit(BNX2FC_FLAG_ISSUE_ABTS, &orig_io_req->req_flags)) { + BNX2FC_IO_DBG(srr_req, "srr_compl:xid - 0x%x flags = %lx", + orig_io_req->xid, orig_io_req->req_flags); + goto srr_compl_done; + } mp_req = &(srr_req->mp_req); fc_hdr = &(mp_req->resp_fc_hdr); resp_len = mp_req->resp_len; diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c index 85bcc4b5596..8c6156a10d9 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c +++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c @@ -22,7 +22,7 @@ DEFINE_PER_CPU(struct bnx2fc_percpu_s, bnx2fc_percpu); #define DRV_MODULE_NAME "bnx2fc" #define DRV_MODULE_VERSION BNX2FC_VERSION -#define DRV_MODULE_RELDATE "Oct 02, 2011" +#define DRV_MODULE_RELDATE "Oct 21, 2011" static char version[] __devinitdata = diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c index 0c64d184d73..84a78af83f9 100644 --- a/drivers/scsi/bnx2fc/bnx2fc_io.c +++ b/drivers/scsi/bnx2fc/bnx2fc_io.c @@ -1103,7 +1103,10 @@ int bnx2fc_eh_abort(struct scsi_cmnd *sc_cmd) struct fc_rport_libfc_priv *rp = rport->dd_data; struct bnx2fc_cmd *io_req; struct fc_lport *lport; + struct fc_rport_priv *rdata; struct bnx2fc_rport *tgt; + int logo_issued; + int wait_cnt = 0; int rc = FAILED; @@ -1192,8 +1195,40 @@ int bnx2fc_eh_abort(struct scsi_cmnd *sc_cmd) } else { printk(KERN_ERR PFX "eh_abort: io_req (xid = 0x%x) " "already in abts processing\n", io_req->xid); + if (cancel_delayed_work(&io_req->timeout_work)) + kref_put(&io_req->refcount, + bnx2fc_cmd_release); /* drop timer hold */ + bnx2fc_initiate_cleanup(io_req); + + spin_unlock_bh(&tgt->tgt_lock); + + wait_for_completion(&io_req->tm_done); + + spin_lock_bh(&tgt->tgt_lock); + io_req->wait_for_comp = 0; + rdata = io_req->tgt->rdata; + logo_issued = test_and_set_bit(BNX2FC_FLAG_EXPL_LOGO, + &tgt->flags); kref_put(&io_req->refcount, bnx2fc_cmd_release); spin_unlock_bh(&tgt->tgt_lock); + + if (!logo_issued) { + BNX2FC_IO_DBG(io_req, "Expl logo - tgt flags = 0x%lx\n", + tgt->flags); + mutex_lock(&lport->disc.disc_mutex); + lport->tt.rport_logoff(rdata); + mutex_unlock(&lport->disc.disc_mutex); + do { + msleep(BNX2FC_RELOGIN_WAIT_TIME); + /* + * If session not recovered, let SCSI-ml + * escalate error recovery. + */ + if (wait_cnt++ > BNX2FC_RELOGIN_WAIT_CNT) + return FAILED; + } while (!test_bit(BNX2FC_FLAG_SESSION_READY, + &tgt->flags)); + } return SUCCESS; } if (rc == FAILED) { @@ -1275,6 +1310,8 @@ void bnx2fc_process_cleanup_compl(struct bnx2fc_cmd *io_req, io_req->refcount.refcount.counter, io_req->cmd_type); bnx2fc_scsi_done(io_req, DID_ERROR); kref_put(&io_req->refcount, bnx2fc_cmd_release); + if (io_req->wait_for_comp) + complete(&io_req->tm_done); } void bnx2fc_process_abts_compl(struct bnx2fc_cmd *io_req, diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c index 7c05fd9dccf..339ea23a867 100644 --- a/drivers/scsi/device_handler/scsi_dh.c +++ b/drivers/scsi/device_handler/scsi_dh.c @@ -441,7 +441,15 @@ int scsi_dh_activate(struct request_queue *q, activate_complete fn, void *data) spin_lock_irqsave(q->queue_lock, flags); sdev = q->queuedata; - if (sdev && sdev->scsi_dh_data) + if (!sdev) { + spin_unlock_irqrestore(q->queue_lock, flags); + err = SCSI_DH_NOSYS; + if (fn) + fn(data, err); + return err; + } + + if (sdev->scsi_dh_data) scsi_dh = sdev->scsi_dh_data->scsi_dh; dev = get_device(&sdev->sdev_gendev); if (!scsi_dh || !dev || diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index 627f4b5e517..fe4df2da309 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -507,7 +507,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h) int len, k, off, valid_states = 0; unsigned char *ucp; unsigned err; - unsigned long expiry, interval = 1; + unsigned long expiry, interval = 1000; expiry = round_jiffies_up(jiffies + ALUA_FAILOVER_TIMEOUT); retry: @@ -734,6 +734,7 @@ static int alua_bus_attach(struct scsi_device *sdev) spin_lock_irqsave(sdev->request_queue->queue_lock, flags); sdev->scsi_dh_data = scsi_dh_data; spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); + sdev_printk(KERN_NOTICE, sdev, "%s: Attached\n", ALUA_DH_NAME); return 0; diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index 61384ee4049..cefbe44bb84 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -2347,14 +2347,11 @@ static void fcoe_flogi_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) goto done; mac = fr_cb(fp)->granted_mac; - if (is_zero_ether_addr(mac)) { - /* pre-FIP */ - if (fcoe_ctlr_recv_flogi(fip, lport, fp)) { - fc_frame_free(fp); - return; - } - } - fcoe_update_src_mac(lport, mac); + /* pre-FIP */ + if (is_zero_ether_addr(mac)) + fcoe_ctlr_recv_flogi(fip, lport, fp); + if (!is_zero_ether_addr(mac)) + fcoe_update_src_mac(lport, mac); done: fc_lport_flogi_resp(seq, fp, lport); } diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 4f7a5829ea4..351dc0b86fa 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -286,6 +286,7 @@ static void scsi_host_dev_release(struct device *dev) { struct Scsi_Host *shost = dev_to_shost(dev); struct device *parent = dev->parent; + struct request_queue *q; scsi_proc_hostdir_rm(shost->hostt); @@ -293,9 +294,11 @@ static void scsi_host_dev_release(struct device *dev) kthread_stop(shost->ehandler); if (shost->work_q) destroy_workqueue(shost->work_q); - if (shost->uspace_req_q) { - kfree(shost->uspace_req_q->queuedata); - scsi_free_queue(shost->uspace_req_q); + q = shost->uspace_req_q; + if (q) { + kfree(q->queuedata); + q->queuedata = NULL; + scsi_free_queue(q); } scsi_destroy_command_freelist(shost); diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index bbdc9f960a6..e76107b2ade 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -48,6 +48,7 @@ #include <linux/bitmap.h> #include <linux/atomic.h> #include <linux/kthread.h> +#include <linux/jiffies.h> #include "hpsa_cmd.h" #include "hpsa.h" @@ -127,6 +128,10 @@ static struct board_type products[] = { static int number_of_controllers; +static struct list_head hpsa_ctlr_list = LIST_HEAD_INIT(hpsa_ctlr_list); +static spinlock_t lockup_detector_lock; +static struct task_struct *hpsa_lockup_detector; + static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id); static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id); static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg); @@ -484,6 +489,7 @@ static struct scsi_host_template hpsa_driver_template = { #endif .sdev_attrs = hpsa_sdev_attrs, .shost_attrs = hpsa_shost_attrs, + .max_sectors = 8192, }; @@ -566,16 +572,16 @@ static int hpsa_find_target_lun(struct ctlr_info *h, * assumes h->devlock is held */ int i, found = 0; - DECLARE_BITMAP(lun_taken, HPSA_MAX_SCSI_DEVS_PER_HBA); + DECLARE_BITMAP(lun_taken, HPSA_MAX_DEVICES); - memset(&lun_taken[0], 0, HPSA_MAX_SCSI_DEVS_PER_HBA >> 3); + memset(&lun_taken[0], 0, HPSA_MAX_DEVICES >> 3); for (i = 0; i < h->ndevices; i++) { if (h->dev[i]->bus == bus && h->dev[i]->target != -1) set_bit(h->dev[i]->target, lun_taken); } - for (i = 0; i < HPSA_MAX_SCSI_DEVS_PER_HBA; i++) { + for (i = 0; i < HPSA_MAX_DEVICES; i++) { if (!test_bit(i, lun_taken)) { /* *bus = 1; */ *target = i; @@ -598,7 +604,7 @@ static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno, unsigned char addr1[8], addr2[8]; struct hpsa_scsi_dev_t *sd; - if (n >= HPSA_MAX_SCSI_DEVS_PER_HBA) { + if (n >= HPSA_MAX_DEVICES) { dev_err(&h->pdev->dev, "too many devices, some will be " "inaccessible.\n"); return -1; @@ -673,7 +679,7 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno, struct hpsa_scsi_dev_t *removed[], int *nremoved) { /* assumes h->devlock is held */ - BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA); + BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES); removed[*nremoved] = h->dev[entry]; (*nremoved)++; @@ -702,7 +708,7 @@ static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry, int i; struct hpsa_scsi_dev_t *sd; - BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA); + BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES); sd = h->dev[entry]; removed[*nremoved] = h->dev[entry]; @@ -814,10 +820,8 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, int nadded, nremoved; struct Scsi_Host *sh = NULL; - added = kzalloc(sizeof(*added) * HPSA_MAX_SCSI_DEVS_PER_HBA, - GFP_KERNEL); - removed = kzalloc(sizeof(*removed) * HPSA_MAX_SCSI_DEVS_PER_HBA, - GFP_KERNEL); + added = kzalloc(sizeof(*added) * HPSA_MAX_DEVICES, GFP_KERNEL); + removed = kzalloc(sizeof(*removed) * HPSA_MAX_DEVICES, GFP_KERNEL); if (!added || !removed) { dev_warn(&h->pdev->dev, "out of memory in " @@ -1338,6 +1342,22 @@ static inline void hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h, wait_for_completion(&wait); } +static void hpsa_scsi_do_simple_cmd_core_if_no_lockup(struct ctlr_info *h, + struct CommandList *c) +{ + unsigned long flags; + + /* If controller lockup detected, fake a hardware error. */ + spin_lock_irqsave(&h->lock, flags); + if (unlikely(h->lockup_detected)) { + spin_unlock_irqrestore(&h->lock, flags); + c->err_info->CommandStatus = CMD_HARDWARE_ERR; + } else { + spin_unlock_irqrestore(&h->lock, flags); + hpsa_scsi_do_simple_cmd_core(h, c); + } +} + static void hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h, struct CommandList *c, int data_direction) { @@ -1735,7 +1755,6 @@ static int add_msa2xxx_enclosure_device(struct ctlr_info *h, if (is_scsi_rev_5(h)) return 0; /* p1210m doesn't need to do this. */ -#define MAX_MSA2XXX_ENCLOSURES 32 if (*nmsa2xxx_enclosures >= MAX_MSA2XXX_ENCLOSURES) { dev_warn(&h->pdev->dev, "Maximum number of MSA2XXX " "enclosures exceeded. Check your hardware " @@ -1846,8 +1865,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) int raid_ctlr_position; DECLARE_BITMAP(lunzerobits, HPSA_MAX_TARGETS_PER_CTLR); - currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_SCSI_DEVS_PER_HBA, - GFP_KERNEL); + currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_DEVICES, GFP_KERNEL); physdev_list = kzalloc(reportlunsize, GFP_KERNEL); logdev_list = kzalloc(reportlunsize, GFP_KERNEL); tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL); @@ -1870,6 +1888,13 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) /* Allocate the per device structures */ for (i = 0; i < ndevs_to_allocate; i++) { + if (i >= HPSA_MAX_DEVICES) { + dev_warn(&h->pdev->dev, "maximum devices (%d) exceeded." + " %d devices ignored.\n", HPSA_MAX_DEVICES, + ndevs_to_allocate - HPSA_MAX_DEVICES); + break; + } + currentsd[i] = kzalloc(sizeof(*currentsd[i]), GFP_KERNEL); if (!currentsd[i]) { dev_warn(&h->pdev->dev, "out of memory at %s:%d\n", @@ -1956,7 +1981,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) default: break; } - if (ncurrent >= HPSA_MAX_SCSI_DEVS_PER_HBA) + if (ncurrent >= HPSA_MAX_DEVICES) break; } adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent); @@ -2048,8 +2073,14 @@ static int hpsa_scsi_queue_command_lck(struct scsi_cmnd *cmd, } memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr)); - /* Need a lock as this is being allocated from the pool */ spin_lock_irqsave(&h->lock, flags); + if (unlikely(h->lockup_detected)) { + spin_unlock_irqrestore(&h->lock, flags); + cmd->result = DID_ERROR << 16; + done(cmd); + return 0; + } + /* Need a lock as this is being allocated from the pool */ c = cmd_alloc(h); spin_unlock_irqrestore(&h->lock, flags); if (c == NULL) { /* trouble... */ @@ -2601,7 +2632,7 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp) c->SG[0].Len = iocommand.buf_size; c->SG[0].Ext = 0; /* we are not chaining*/ } - hpsa_scsi_do_simple_cmd_core(h, c); + hpsa_scsi_do_simple_cmd_core_if_no_lockup(h, c); if (iocommand.buf_size > 0) hpsa_pci_unmap(h->pdev, c, 1, PCI_DMA_BIDIRECTIONAL); check_ioctl_unit_attention(h, c); @@ -2724,7 +2755,7 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp) c->SG[i].Ext = 0; } } - hpsa_scsi_do_simple_cmd_core(h, c); + hpsa_scsi_do_simple_cmd_core_if_no_lockup(h, c); if (sg_used) hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL); check_ioctl_unit_attention(h, c); @@ -2872,6 +2903,8 @@ static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h, c->Request.Timeout = 0; c->Request.CDB[0] = BMIC_WRITE; c->Request.CDB[6] = BMIC_CACHE_FLUSH; + c->Request.CDB[7] = (size >> 8) & 0xFF; + c->Request.CDB[8] = size & 0xFF; break; case TEST_UNIT_READY: c->Request.CDBLen = 6; @@ -3091,6 +3124,7 @@ static irqreturn_t hpsa_intx_discard_completions(int irq, void *dev_id) if (interrupt_not_for_us(h)) return IRQ_NONE; spin_lock_irqsave(&h->lock, flags); + h->last_intr_timestamp = get_jiffies_64(); while (interrupt_pending(h)) { raw_tag = get_next_completion(h); while (raw_tag != FIFO_EMPTY) @@ -3110,6 +3144,7 @@ static irqreturn_t hpsa_msix_discard_completions(int irq, void *dev_id) return IRQ_NONE; spin_lock_irqsave(&h->lock, flags); + h->last_intr_timestamp = get_jiffies_64(); raw_tag = get_next_completion(h); while (raw_tag != FIFO_EMPTY) raw_tag = next_command(h); @@ -3126,6 +3161,7 @@ static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id) if (interrupt_not_for_us(h)) return IRQ_NONE; spin_lock_irqsave(&h->lock, flags); + h->last_intr_timestamp = get_jiffies_64(); while (interrupt_pending(h)) { raw_tag = get_next_completion(h); while (raw_tag != FIFO_EMPTY) { @@ -3146,6 +3182,7 @@ static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id) u32 raw_tag; spin_lock_irqsave(&h->lock, flags); + h->last_intr_timestamp = get_jiffies_64(); raw_tag = get_next_completion(h); while (raw_tag != FIFO_EMPTY) { if (hpsa_tag_contains_index(raw_tag)) @@ -4090,6 +4127,149 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h) kfree(h); } +static void remove_ctlr_from_lockup_detector_list(struct ctlr_info *h) +{ + assert_spin_locked(&lockup_detector_lock); + if (!hpsa_lockup_detector) + return; + if (h->lockup_detected) + return; /* already stopped the lockup detector */ + list_del(&h->lockup_list); +} + +/* Called when controller lockup detected. */ +static void fail_all_cmds_on_list(struct ctlr_info *h, struct list_head *list) +{ + struct CommandList *c = NULL; + + assert_spin_locked(&h->lock); + /* Mark all outstanding commands as failed and complete them. */ + while (!list_empty(list)) { + c = list_entry(list->next, struct CommandList, list); + c->err_info->CommandStatus = CMD_HARDWARE_ERR; + finish_cmd(c, c->Header.Tag.lower); + } +} + +static void controller_lockup_detected(struct ctlr_info *h) +{ + unsigned long flags; + + assert_spin_locked(&lockup_detector_lock); + remove_ctlr_from_lockup_detector_list(h); + h->access.set_intr_mask(h, HPSA_INTR_OFF); + spin_lock_irqsave(&h->lock, flags); + h->lockup_detected = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET); + spin_unlock_irqrestore(&h->lock, flags); + dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x\n", + h->lockup_detected); + pci_disable_device(h->pdev); + spin_lock_irqsave(&h->lock, flags); + fail_all_cmds_on_list(h, &h->cmpQ); + fail_all_cmds_on_list(h, &h->reqQ); + spin_unlock_irqrestore(&h->lock, flags); +} + +#define HEARTBEAT_SAMPLE_INTERVAL (10 * HZ) +#define HEARTBEAT_CHECK_MINIMUM_INTERVAL (HEARTBEAT_SAMPLE_INTERVAL / 2) + +static void detect_controller_lockup(struct ctlr_info *h) +{ + u64 now; + u32 heartbeat; + unsigned long flags; + + assert_spin_locked(&lockup_detector_lock); + now = get_jiffies_64(); + /* If we've received an interrupt recently, we're ok. */ + if (time_after64(h->last_intr_timestamp + + (HEARTBEAT_CHECK_MINIMUM_INTERVAL), now)) + return; + + /* + * If we've already checked the heartbeat recently, we're ok. + * This could happen if someone sends us a signal. We + * otherwise don't care about signals in this thread. + */ + if (time_after64(h->last_heartbeat_timestamp + + (HEARTBEAT_CHECK_MINIMUM_INTERVAL), now)) + return; + + /* If heartbeat has not changed since we last looked, we're not ok. */ + spin_lock_irqsave(&h->lock, flags); + heartbeat = readl(&h->cfgtable->HeartBeat); + spin_unlock_irqrestore(&h->lock, flags); + if (h->last_heartbeat == heartbeat) { + controller_lockup_detected(h); + return; + } + + /* We're ok. */ + h->last_heartbeat = heartbeat; + h->last_heartbeat_timestamp = now; +} + +static int detect_controller_lockup_thread(void *notused) +{ + struct ctlr_info *h; + unsigned long flags; + + while (1) { + struct list_head *this, *tmp; + + schedule_timeout_interruptible(HEARTBEAT_SAMPLE_INTERVAL); + if (kthread_should_stop()) + break; + spin_lock_irqsave(&lockup_detector_lock, flags); + list_for_each_safe(this, tmp, &hpsa_ctlr_list) { + h = list_entry(this, struct ctlr_info, lockup_list); + detect_controller_lockup(h); + } + spin_unlock_irqrestore(&lockup_detector_lock, flags); + } + return 0; +} + +static void add_ctlr_to_lockup_detector_list(struct ctlr_info *h) +{ + unsigned long flags; + + spin_lock_irqsave(&lockup_detector_lock, flags); + list_add_tail(&h->lockup_list, &hpsa_ctlr_list); + spin_unlock_irqrestore(&lockup_detector_lock, flags); +} + +static void start_controller_lockup_detector(struct ctlr_info *h) +{ + /* Start the lockup detector thread if not already started */ + if (!hpsa_lockup_detector) { + spin_lock_init(&lockup_detector_lock); + hpsa_lockup_detector = + kthread_run(detect_controller_lockup_thread, + NULL, "hpsa"); + } + if (!hpsa_lockup_detector) { + dev_warn(&h->pdev->dev, + "Could not start lockup detector thread\n"); + return; + } + add_ctlr_to_lockup_detector_list(h); +} + +static void stop_controller_lockup_detector(struct ctlr_info *h) +{ + unsigned long flags; + + spin_lock_irqsave(&lockup_detector_lock, flags); + remove_ctlr_from_lockup_detector_list(h); + /* If the list of ctlr's to monitor is empty, stop the thread */ + if (list_empty(&hpsa_ctlr_list)) { + kthread_stop(hpsa_lockup_detector); + hpsa_lockup_detector = NULL; + } + spin_unlock_irqrestore(&lockup_detector_lock, flags); +} + static int __devinit hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -4127,7 +4307,6 @@ reinit_after_soft_reset: return -ENOMEM; h->pdev = pdev; - h->busy_initializing = 1; h->intr_mode = hpsa_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT; INIT_LIST_HEAD(&h->cmpQ); INIT_LIST_HEAD(&h->reqQ); @@ -4236,7 +4415,7 @@ reinit_after_soft_reset: hpsa_hba_inquiry(h); hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */ - h->busy_initializing = 0; + start_controller_lockup_detector(h); return 1; clean4: @@ -4245,7 +4424,6 @@ clean4: free_irq(h->intr[h->intr_mode], h); clean2: clean1: - h->busy_initializing = 0; kfree(h); return rc; } @@ -4300,10 +4478,11 @@ static void __devexit hpsa_remove_one(struct pci_dev *pdev) struct ctlr_info *h; if (pci_get_drvdata(pdev) == NULL) { - dev_err(&pdev->dev, "unable to remove device \n"); + dev_err(&pdev->dev, "unable to remove device\n"); return; } h = pci_get_drvdata(pdev); + stop_controller_lockup_detector(h); hpsa_unregister_scsi(h); /* unhook from SCSI subsystem */ hpsa_shutdown(pdev); iounmap(h->vaddr); diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index 7f53ceaa723..91edafb8c7e 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -95,8 +95,6 @@ struct ctlr_info { unsigned long *cmd_pool_bits; int nr_allocs; int nr_frees; - int busy_initializing; - int busy_scanning; int scan_finished; spinlock_t scan_lock; wait_queue_head_t scan_wait_queue; @@ -104,8 +102,7 @@ struct ctlr_info { struct Scsi_Host *scsi_host; spinlock_t devlock; /* to protect hba[ctlr]->dev[]; */ int ndevices; /* number of used elements in .dev[] array. */ -#define HPSA_MAX_SCSI_DEVS_PER_HBA 256 - struct hpsa_scsi_dev_t *dev[HPSA_MAX_SCSI_DEVS_PER_HBA]; + struct hpsa_scsi_dev_t *dev[HPSA_MAX_DEVICES]; /* * Performant mode tables. */ @@ -124,6 +121,11 @@ struct ctlr_info { unsigned char reply_pool_wraparound; u32 *blockFetchTable; unsigned char *hba_inquiry_data; + u64 last_intr_timestamp; + u32 last_heartbeat; + u64 last_heartbeat_timestamp; + u32 lockup_detected; + struct list_head lockup_list; }; #define HPSA_ABORT_MSG 0 #define HPSA_DEVICE_RESET_MSG 1 diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h index 55d741b019d..3fd4715935c 100644 --- a/drivers/scsi/hpsa_cmd.h +++ b/drivers/scsi/hpsa_cmd.h @@ -123,8 +123,11 @@ union u64bit { /* FIXME this is a per controller value (barf!) */ #define HPSA_MAX_TARGETS_PER_CTLR 16 -#define HPSA_MAX_LUN 256 +#define HPSA_MAX_LUN 1024 #define HPSA_MAX_PHYS_LUN 1024 +#define MAX_MSA2XXX_ENCLOSURES 32 +#define HPSA_MAX_DEVICES (HPSA_MAX_PHYS_LUN + HPSA_MAX_LUN + \ + MAX_MSA2XXX_ENCLOSURES + 1) /* + 1 is for the controller itself */ /* SCSI-3 Commands */ #pragma pack(1) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 73e24b48dce..fd860d952b2 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -9123,6 +9123,8 @@ static struct pci_device_id ipr_pci_table[] __devinitdata = { { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2, PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B2, 0, 0, 0 }, { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2, + PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C3, 0, 0, 0 }, + { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2, PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C4, 0, 0, 0 }, { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_ASIC_E2, PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B4, 0, 0, 0 }, diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h index 6d257e0dd6a..ac84736c1b9 100644 --- a/drivers/scsi/ipr.h +++ b/drivers/scsi/ipr.h @@ -82,6 +82,7 @@ #define IPR_SUBS_DEV_ID_57B4 0x033B #define IPR_SUBS_DEV_ID_57B2 0x035F +#define IPR_SUBS_DEV_ID_57C3 0x0353 #define IPR_SUBS_DEV_ID_57C4 0x0354 #define IPR_SUBS_DEV_ID_57C6 0x0357 #define IPR_SUBS_DEV_ID_57CC 0x035C diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index f07f30fada1..e7fe9c4c85b 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1350,7 +1350,7 @@ static void isci_user_parameters_get(struct sci_user_parameters *u) u->stp_max_occupancy_timeout = stp_max_occ_to; u->ssp_max_occupancy_timeout = ssp_max_occ_to; u->no_outbound_task_timeout = no_outbound_task_to; - u->max_number_concurrent_device_spin_up = max_concurr_spinup; + u->max_concurr_spinup = max_concurr_spinup; } static void sci_controller_initial_state_enter(struct sci_base_state_machine *sm) @@ -1661,7 +1661,7 @@ static void sci_controller_set_default_config_parameters(struct isci_host *ihost ihost->oem_parameters.controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; /* Default to APC mode. */ - ihost->oem_parameters.controller.max_concurrent_dev_spin_up = 1; + ihost->oem_parameters.controller.max_concurr_spin_up = 1; /* Default to no SSC operation. */ ihost->oem_parameters.controller.do_enable_ssc = false; @@ -1787,7 +1787,8 @@ int sci_oem_parameters_validate(struct sci_oem_params *oem) } else return -EINVAL; - if (oem->controller.max_concurrent_dev_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT) + if (oem->controller.max_concurr_spin_up > MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT || + oem->controller.max_concurr_spin_up < 1) return -EINVAL; return 0; @@ -1810,6 +1811,16 @@ static enum sci_status sci_oem_parameters_set(struct isci_host *ihost) return SCI_FAILURE_INVALID_STATE; } +static u8 max_spin_up(struct isci_host *ihost) +{ + if (ihost->user_parameters.max_concurr_spinup) + return min_t(u8, ihost->user_parameters.max_concurr_spinup, + MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT); + else + return min_t(u8, ihost->oem_parameters.controller.max_concurr_spin_up, + MAX_CONCURRENT_DEVICE_SPIN_UP_COUNT); +} + static void power_control_timeout(unsigned long data) { struct sci_timer *tmr = (struct sci_timer *)data; @@ -1839,8 +1850,7 @@ static void power_control_timeout(unsigned long data) if (iphy == NULL) continue; - if (ihost->power_control.phys_granted_power >= - ihost->oem_parameters.controller.max_concurrent_dev_spin_up) + if (ihost->power_control.phys_granted_power >= max_spin_up(ihost)) break; ihost->power_control.requesters[i] = NULL; @@ -1865,8 +1875,7 @@ void sci_controller_power_control_queue_insert(struct isci_host *ihost, { BUG_ON(iphy == NULL); - if (ihost->power_control.phys_granted_power < - ihost->oem_parameters.controller.max_concurrent_dev_spin_up) { + if (ihost->power_control.phys_granted_power < max_spin_up(ihost)) { ihost->power_control.phys_granted_power++; sci_phy_consume_power_handler(iphy); diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 43fe840fbe9..a97edabcb85 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -118,7 +118,7 @@ unsigned char phy_gen = 3; module_param(phy_gen, byte, 0); MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)"); -unsigned char max_concurr_spinup = 1; +unsigned char max_concurr_spinup; module_param(max_concurr_spinup, byte, 0); MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup"); diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index 8e59c8865dc..ac7f27749f9 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -145,48 +145,15 @@ static void sci_port_bcn_enable(struct isci_port *iport) } } -/* called under sci_lock to stabilize phy:port associations */ -void isci_port_bcn_enable(struct isci_host *ihost, struct isci_port *iport) -{ - int i; - - clear_bit(IPORT_BCN_BLOCKED, &iport->flags); - wake_up(&ihost->eventq); - - if (!test_and_clear_bit(IPORT_BCN_PENDING, &iport->flags)) - return; - - for (i = 0; i < ARRAY_SIZE(iport->phy_table); i++) { - struct isci_phy *iphy = iport->phy_table[i]; - - if (!iphy) - continue; - - ihost->sas_ha.notify_port_event(&iphy->sas_phy, - PORTE_BROADCAST_RCVD); - break; - } -} - static void isci_port_bc_change_received(struct isci_host *ihost, struct isci_port *iport, struct isci_phy *iphy) { - if (iport && test_bit(IPORT_BCN_BLOCKED, &iport->flags)) { - dev_dbg(&ihost->pdev->dev, - "%s: disabled BCN; isci_phy = %p, sas_phy = %p\n", - __func__, iphy, &iphy->sas_phy); - set_bit(IPORT_BCN_PENDING, &iport->flags); - atomic_inc(&iport->event); - wake_up(&ihost->eventq); - } else { - dev_dbg(&ihost->pdev->dev, - "%s: isci_phy = %p, sas_phy = %p\n", - __func__, iphy, &iphy->sas_phy); + dev_dbg(&ihost->pdev->dev, + "%s: isci_phy = %p, sas_phy = %p\n", + __func__, iphy, &iphy->sas_phy); - ihost->sas_ha.notify_port_event(&iphy->sas_phy, - PORTE_BROADCAST_RCVD); - } + ihost->sas_ha.notify_port_event(&iphy->sas_phy, PORTE_BROADCAST_RCVD); sci_port_bcn_enable(iport); } @@ -278,9 +245,6 @@ static void isci_port_link_down(struct isci_host *isci_host, /* check to see if this is the last phy on this port. */ if (isci_phy->sas_phy.port && isci_phy->sas_phy.port->num_phys == 1) { - atomic_inc(&isci_port->event); - isci_port_bcn_enable(isci_host, isci_port); - /* change the state for all devices on this port. The * next task sent to this device will be returned as * SAS_TASK_UNDELIVERED, and the scsi mid layer will @@ -350,6 +314,34 @@ static void isci_port_stop_complete(struct isci_host *ihost, dev_dbg(&ihost->pdev->dev, "Port stop complete\n"); } + +static bool is_port_ready_state(enum sci_port_states state) +{ + switch (state) { + case SCI_PORT_READY: + case SCI_PORT_SUB_WAITING: + case SCI_PORT_SUB_OPERATIONAL: + case SCI_PORT_SUB_CONFIGURING: + return true; + default: + return false; + } +} + +/* flag dummy rnc hanling when exiting a ready state */ +static void port_state_machine_change(struct isci_port *iport, + enum sci_port_states state) +{ + struct sci_base_state_machine *sm = &iport->sm; + enum sci_port_states old_state = sm->current_state_id; + + if (is_port_ready_state(old_state) && !is_port_ready_state(state)) + iport->ready_exit = true; + + sci_change_state(sm, state); + iport->ready_exit = false; +} + /** * isci_port_hard_reset_complete() - This function is called by the sci core * when the hard reset complete notification has been received. @@ -368,6 +360,26 @@ static void isci_port_hard_reset_complete(struct isci_port *isci_port, /* Save the status of the hard reset from the port. */ isci_port->hard_reset_status = completion_status; + if (completion_status != SCI_SUCCESS) { + + /* The reset failed. The port state is now SCI_PORT_FAILED. */ + if (isci_port->active_phy_mask == 0) { + + /* Generate the link down now to the host, since it + * was intercepted by the hard reset state machine when + * it really happened. + */ + isci_port_link_down(isci_port->isci_host, + &isci_port->isci_host->phys[ + isci_port->last_active_phy], + isci_port); + } + /* Advance the port state so that link state changes will be + * noticed. + */ + port_state_machine_change(isci_port, SCI_PORT_SUB_WAITING); + + } complete_all(&isci_port->hard_reset_complete); } @@ -657,6 +669,8 @@ void sci_port_deactivate_phy(struct isci_port *iport, struct isci_phy *iphy, struct isci_host *ihost = iport->owning_controller; iport->active_phy_mask &= ~(1 << iphy->phy_index); + if (!iport->active_phy_mask) + iport->last_active_phy = iphy->phy_index; iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN; @@ -683,33 +697,6 @@ static void sci_port_invalid_link_up(struct isci_port *iport, struct isci_phy *i } } -static bool is_port_ready_state(enum sci_port_states state) -{ - switch (state) { - case SCI_PORT_READY: - case SCI_PORT_SUB_WAITING: - case SCI_PORT_SUB_OPERATIONAL: - case SCI_PORT_SUB_CONFIGURING: - return true; - default: - return false; - } -} - -/* flag dummy rnc hanling when exiting a ready state */ -static void port_state_machine_change(struct isci_port *iport, - enum sci_port_states state) -{ - struct sci_base_state_machine *sm = &iport->sm; - enum sci_port_states old_state = sm->current_state_id; - - if (is_port_ready_state(old_state) && !is_port_ready_state(state)) - iport->ready_exit = true; - - sci_change_state(sm, state); - iport->ready_exit = false; -} - /** * sci_port_general_link_up_handler - phy can be assigned to port? * @sci_port: sci_port object for which has a phy that has gone link up. @@ -1622,7 +1609,8 @@ void sci_port_construct(struct isci_port *iport, u8 index, iport->logical_port_index = SCIC_SDS_DUMMY_PORT; iport->physical_port_index = index; iport->active_phy_mask = 0; - iport->ready_exit = false; + iport->last_active_phy = 0; + iport->ready_exit = false; iport->owning_controller = ihost; @@ -1648,7 +1636,6 @@ void isci_port_init(struct isci_port *iport, struct isci_host *ihost, int index) init_completion(&iport->start_complete); iport->isci_host = ihost; isci_port_change_state(iport, isci_freed); - atomic_set(&iport->event, 0); } /** @@ -1676,7 +1663,7 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor { unsigned long flags; enum sci_status status; - int idx, ret = TMF_RESP_FUNC_COMPLETE; + int ret = TMF_RESP_FUNC_COMPLETE; dev_dbg(&ihost->pdev->dev, "%s: iport = %p\n", __func__, iport); @@ -1697,8 +1684,13 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor "%s: iport = %p; hard reset completion\n", __func__, iport); - if (iport->hard_reset_status != SCI_SUCCESS) + if (iport->hard_reset_status != SCI_SUCCESS) { ret = TMF_RESP_FUNC_FAILED; + + dev_err(&ihost->pdev->dev, + "%s: iport = %p; hard reset failed (0x%x)\n", + __func__, iport, iport->hard_reset_status); + } } else { ret = TMF_RESP_FUNC_FAILED; @@ -1718,18 +1710,6 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor "%s: iport = %p; hard reset failed " "(0x%x) - driving explicit link fail for all phys\n", __func__, iport, iport->hard_reset_status); - - /* Down all phys in the port. */ - spin_lock_irqsave(&ihost->scic_lock, flags); - for (idx = 0; idx < SCI_MAX_PHYS; ++idx) { - struct isci_phy *iphy = iport->phy_table[idx]; - - if (!iphy) - continue; - sci_phy_stop(iphy); - sci_phy_start(iphy); - } - spin_unlock_irqrestore(&ihost->scic_lock, flags); } return ret; } diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index b50ecd4e8f9..cb5ffbc3860 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -77,7 +77,6 @@ enum isci_status { /** * struct isci_port - isci direct attached sas port object - * @event: counts bcns and port stop events (for bcn filtering) * @ready_exit: several states constitute 'ready'. When exiting ready we * need to take extra port-teardown actions that are * skipped when exiting to another 'ready' state. @@ -92,10 +91,6 @@ enum isci_status { */ struct isci_port { enum isci_status status; - #define IPORT_BCN_BLOCKED 0 - #define IPORT_BCN_PENDING 1 - unsigned long flags; - atomic_t event; struct isci_host *isci_host; struct asd_sas_port sas_port; struct list_head remote_dev_list; @@ -109,6 +104,7 @@ struct isci_port { u8 logical_port_index; u8 physical_port_index; u8 active_phy_mask; + u8 last_active_phy; u16 reserved_rni; u16 reserved_tag; u32 started_request_count; diff --git a/drivers/scsi/isci/probe_roms.h b/drivers/scsi/isci/probe_roms.h index dc007e692f4..2c75248ca32 100644 --- a/drivers/scsi/isci/probe_roms.h +++ b/drivers/scsi/isci/probe_roms.h @@ -112,7 +112,7 @@ struct sci_user_parameters { * This field specifies the maximum number of direct attached devices * that can have power supplied to them simultaneously. */ - u8 max_number_concurrent_device_spin_up; + u8 max_concurr_spinup; /** * This field specifies the number of seconds to allow a phy to consume @@ -219,7 +219,7 @@ struct sci_bios_oem_param_block_hdr { struct sci_oem_params { struct { uint8_t mode_type; - uint8_t max_concurrent_dev_spin_up; + uint8_t max_concurr_spin_up; uint8_t do_enable_ssc; uint8_t reserved; } controller; diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index fbf9ce28c3f..b207cd3b15a 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1438,88 +1438,3 @@ int isci_remote_device_found(struct domain_device *domain_dev) return status == SCI_SUCCESS ? 0 : -ENODEV; } -/** - * isci_device_is_reset_pending() - This function will check if there is any - * pending reset condition on the device. - * @request: This parameter is the isci_device object. - * - * true if there is a reset pending for the device. - */ -bool isci_device_is_reset_pending( - struct isci_host *isci_host, - struct isci_remote_device *isci_device) -{ - struct isci_request *isci_request; - struct isci_request *tmp_req; - bool reset_is_pending = false; - unsigned long flags; - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = %p\n", __func__, isci_device); - - spin_lock_irqsave(&isci_host->scic_lock, flags); - - /* Check for reset on all pending requests. */ - list_for_each_entry_safe(isci_request, tmp_req, - &isci_device->reqs_in_process, dev_node) { - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = %p request = %p\n", - __func__, isci_device, isci_request); - - if (isci_request->ttype == io_task) { - struct sas_task *task = isci_request_access_task( - isci_request); - - spin_lock(&task->task_state_lock); - if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) - reset_is_pending = true; - spin_unlock(&task->task_state_lock); - } - } - - spin_unlock_irqrestore(&isci_host->scic_lock, flags); - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = %p reset_is_pending = %d\n", - __func__, isci_device, reset_is_pending); - - return reset_is_pending; -} - -/** - * isci_device_clear_reset_pending() - This function will clear if any pending - * reset condition flags on the device. - * @request: This parameter is the isci_device object. - * - * true if there is a reset pending for the device. - */ -void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote_device *idev) -{ - struct isci_request *isci_request; - struct isci_request *tmp_req; - unsigned long flags = 0; - - dev_dbg(&ihost->pdev->dev, "%s: idev=%p, ihost=%p\n", - __func__, idev, ihost); - - spin_lock_irqsave(&ihost->scic_lock, flags); - - /* Clear reset pending on all pending requests. */ - list_for_each_entry_safe(isci_request, tmp_req, - &idev->reqs_in_process, dev_node) { - dev_dbg(&ihost->pdev->dev, "%s: idev = %p request = %p\n", - __func__, idev, isci_request); - - if (isci_request->ttype == io_task) { - - unsigned long flags2; - struct sas_task *task = isci_request_access_task( - isci_request); - - spin_lock_irqsave(&task->task_state_lock, flags2); - task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET; - spin_unlock_irqrestore(&task->task_state_lock, flags2); - } - } - spin_unlock_irqrestore(&ihost->scic_lock, flags); -} diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index e1747ea0d0e..483ee50152f 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -132,10 +132,7 @@ void isci_remote_device_nuke_requests(struct isci_host *ihost, struct isci_remote_device *idev); void isci_remote_device_gone(struct domain_device *domain_dev); int isci_remote_device_found(struct domain_device *domain_dev); -bool isci_device_is_reset_pending(struct isci_host *ihost, - struct isci_remote_device *idev); -void isci_device_clear_reset_pending(struct isci_host *ihost, - struct isci_remote_device *idev); + /** * sci_remote_device_stop() - This method will stop both transmission and * reception of link activity for the supplied remote device. This method diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 565a9f0a9bc..192cb48d849 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -191,7 +191,7 @@ static void sci_task_request_build_ssp_task_iu(struct isci_request *ireq) task_iu->task_func = isci_tmf->tmf_code; task_iu->task_tag = - (ireq->ttype == tmf_task) ? + (test_bit(IREQ_TMF, &ireq->flags)) ? isci_tmf->io_tag : SCI_CONTROLLER_INVALID_IO_TAG; } @@ -516,7 +516,7 @@ sci_io_request_construct_sata(struct isci_request *ireq, struct domain_device *dev = ireq->target_device->domain_dev; /* check for management protocols */ - if (ireq->ttype == tmf_task) { + if (test_bit(IREQ_TMF, &ireq->flags)) { struct isci_tmf *tmf = isci_request_access_tmf(ireq); if (tmf->tmf_code == isci_tmf_sata_srst_high || @@ -632,7 +632,7 @@ enum sci_status sci_task_request_construct_sata(struct isci_request *ireq) enum sci_status status = SCI_SUCCESS; /* check for management protocols */ - if (ireq->ttype == tmf_task) { + if (test_bit(IREQ_TMF, &ireq->flags)) { struct isci_tmf *tmf = isci_request_access_tmf(ireq); if (tmf->tmf_code == isci_tmf_sata_srst_high || @@ -2630,14 +2630,8 @@ static void isci_task_save_for_upper_layer_completion( switch (task_notification_selection) { case isci_perform_normal_io_completion: - /* Normal notification (task_done) */ - dev_dbg(&host->pdev->dev, - "%s: Normal - task = %p, response=%d (%d), status=%d (%d)\n", - __func__, - task, - task->task_status.resp, response, - task->task_status.stat, status); + /* Add to the completed list. */ list_add(&request->completed_node, &host->requests_to_complete); @@ -2650,13 +2644,6 @@ static void isci_task_save_for_upper_layer_completion( /* No notification to libsas because this request is * already in the abort path. */ - dev_dbg(&host->pdev->dev, - "%s: Aborted - task = %p, response=%d (%d), status=%d (%d)\n", - __func__, - task, - task->task_status.resp, response, - task->task_status.stat, status); - /* Wake up whatever process was waiting for this * request to complete. */ @@ -2673,30 +2660,22 @@ static void isci_task_save_for_upper_layer_completion( case isci_perform_error_io_completion: /* Use sas_task_abort */ - dev_dbg(&host->pdev->dev, - "%s: Error - task = %p, response=%d (%d), status=%d (%d)\n", - __func__, - task, - task->task_status.resp, response, - task->task_status.stat, status); /* Add to the aborted list. */ list_add(&request->completed_node, &host->requests_to_errorback); break; default: - dev_dbg(&host->pdev->dev, - "%s: Unknown - task = %p, response=%d (%d), status=%d (%d)\n", - __func__, - task, - task->task_status.resp, response, - task->task_status.stat, status); - /* Add to the error to libsas list. */ list_add(&request->completed_node, &host->requests_to_errorback); break; } + dev_dbg(&host->pdev->dev, + "%s: %d - task = %p, response=%d (%d), status=%d (%d)\n", + __func__, task_notification_selection, task, + (task) ? task->task_status.resp : 0, response, + (task) ? task->task_status.stat : 0, status); } static void isci_process_stp_response(struct sas_task *task, struct dev_to_host_fis *fis) @@ -2728,9 +2707,9 @@ static void isci_request_io_request_complete(struct isci_host *ihost, struct sas_task *task = isci_request_access_task(request); struct ssp_response_iu *resp_iu; unsigned long task_flags; - struct isci_remote_device *idev = isci_lookup_device(task->dev); - enum service_response response = SAS_TASK_UNDELIVERED; - enum exec_status status = SAS_ABORTED_TASK; + struct isci_remote_device *idev = request->target_device; + enum service_response response = SAS_TASK_UNDELIVERED; + enum exec_status status = SAS_ABORTED_TASK; enum isci_request_status request_status; enum isci_completion_selection complete_to_host = isci_perform_normal_io_completion; @@ -3061,7 +3040,6 @@ static void isci_request_io_request_complete(struct isci_host *ihost, /* complete the io request to the core. */ sci_controller_complete_io(ihost, request->target_device, request); - isci_put_device(idev); /* set terminated handle so it cannot be completed or * terminated again, and to cause any calls into abort @@ -3080,7 +3058,7 @@ static void sci_request_started_state_enter(struct sci_base_state_machine *sm) /* XXX as hch said always creating an internal sas_task for tmf * requests would simplify the driver */ - task = ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL; + task = (test_bit(IREQ_TMF, &ireq->flags)) ? NULL : isci_request_access_task(ireq); /* all unaccelerated request types (non ssp or ncq) handled with * substates @@ -3564,7 +3542,7 @@ static struct isci_request *isci_io_request_from_tag(struct isci_host *ihost, ireq = isci_request_from_tag(ihost, tag); ireq->ttype_ptr.io_task_ptr = task; - ireq->ttype = io_task; + clear_bit(IREQ_TMF, &ireq->flags); task->lldd_task = ireq; return ireq; @@ -3578,7 +3556,7 @@ struct isci_request *isci_tmf_request_from_tag(struct isci_host *ihost, ireq = isci_request_from_tag(ihost, tag); ireq->ttype_ptr.tmf_task_ptr = isci_tmf; - ireq->ttype = tmf_task; + set_bit(IREQ_TMF, &ireq->flags); return ireq; } diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index f720b97b7bb..be38933dd6d 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -77,11 +77,6 @@ enum isci_request_status { dead = 0x07 }; -enum task_type { - io_task = 0, - tmf_task = 1 -}; - enum sci_request_protocol { SCIC_NO_PROTOCOL, SCIC_SMP_PROTOCOL, @@ -116,7 +111,6 @@ struct isci_request { #define IREQ_ACTIVE 3 unsigned long flags; /* XXX kill ttype and ttype_ptr, allocate full sas_task */ - enum task_type ttype; union ttype_ptr_union { struct sas_task *io_task_ptr; /* When ttype==io_task */ struct isci_tmf *tmf_task_ptr; /* When ttype==tmf_task */ diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index e2d9418683c..66ad3dc8949 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -212,16 +212,27 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; spin_unlock_irqrestore(&task->task_state_lock, flags); - /* Indicate QUEUE_FULL so that the scsi - * midlayer retries. if the request - * failed for remote device reasons, - * it gets returned as - * SAS_TASK_UNDELIVERED next time - * through. - */ - isci_task_refuse(ihost, task, - SAS_TASK_COMPLETE, - SAS_QUEUE_FULL); + if (test_bit(IDEV_GONE, &idev->flags)) { + + /* Indicate that the device + * is gone. + */ + isci_task_refuse(ihost, task, + SAS_TASK_UNDELIVERED, + SAS_DEVICE_UNKNOWN); + } else { + /* Indicate QUEUE_FULL so that + * the scsi midlayer retries. + * If the request failed for + * remote device reasons, it + * gets returned as + * SAS_TASK_UNDELIVERED next + * time through. + */ + isci_task_refuse(ihost, task, + SAS_TASK_COMPLETE, + SAS_QUEUE_FULL); + } } } } @@ -243,7 +254,7 @@ static enum sci_status isci_sata_management_task_request_build(struct isci_reque struct isci_tmf *isci_tmf; enum sci_status status; - if (tmf_task != ireq->ttype) + if (!test_bit(IREQ_TMF, &ireq->flags)) return SCI_FAILURE; isci_tmf = isci_request_access_tmf(ireq); @@ -327,6 +338,60 @@ static struct isci_request *isci_task_request_build(struct isci_host *ihost, return ireq; } +/** +* isci_request_mark_zombie() - This function must be called with scic_lock held. +*/ +static void isci_request_mark_zombie(struct isci_host *ihost, struct isci_request *ireq) +{ + struct completion *tmf_completion = NULL; + struct completion *req_completion; + + /* Set the request state to "dead". */ + ireq->status = dead; + + req_completion = ireq->io_request_completion; + ireq->io_request_completion = NULL; + + if (test_bit(IREQ_TMF, &ireq->flags)) { + /* Break links with the TMF request. */ + struct isci_tmf *tmf = isci_request_access_tmf(ireq); + + /* In the case where a task request is dying, + * the thread waiting on the complete will sit and + * timeout unless we wake it now. Since the TMF + * has a default error status, complete it here + * to wake the waiting thread. + */ + if (tmf) { + tmf_completion = tmf->complete; + tmf->complete = NULL; + } + ireq->ttype_ptr.tmf_task_ptr = NULL; + dev_dbg(&ihost->pdev->dev, "%s: tmf_code %d, managed tag %#x\n", + __func__, tmf->tmf_code, tmf->io_tag); + } else { + /* Break links with the sas_task - the callback is done + * elsewhere. + */ + struct sas_task *task = isci_request_access_task(ireq); + + if (task) + task->lldd_task = NULL; + + ireq->ttype_ptr.io_task_ptr = NULL; + } + + dev_warn(&ihost->pdev->dev, "task context unrecoverable (tag: %#x)\n", + ireq->io_tag); + + /* Don't force waiting threads to timeout. */ + if (req_completion) + complete(req_completion); + + if (tmf_completion != NULL) + complete(tmf_completion); +} + static int isci_task_execute_tmf(struct isci_host *ihost, struct isci_remote_device *idev, struct isci_tmf *tmf, unsigned long timeout_ms) @@ -364,6 +429,7 @@ static int isci_task_execute_tmf(struct isci_host *ihost, /* Assign the pointer to the TMF's completion kernel wait structure. */ tmf->complete = &completion; + tmf->status = SCI_FAILURE_TIMEOUT; ireq = isci_task_request_build(ihost, idev, tag, tmf); if (!ireq) @@ -399,18 +465,35 @@ static int isci_task_execute_tmf(struct isci_host *ihost, msecs_to_jiffies(timeout_ms)); if (timeleft == 0) { + /* The TMF did not complete - this could be because + * of an unplug. Terminate the TMF request now. + */ spin_lock_irqsave(&ihost->scic_lock, flags); if (tmf->cb_state_func != NULL) - tmf->cb_state_func(isci_tmf_timed_out, tmf, tmf->cb_data); + tmf->cb_state_func(isci_tmf_timed_out, tmf, + tmf->cb_data); - sci_controller_terminate_request(ihost, - idev, - ireq); + sci_controller_terminate_request(ihost, idev, ireq); spin_unlock_irqrestore(&ihost->scic_lock, flags); - wait_for_completion(tmf->complete); + timeleft = wait_for_completion_timeout( + &completion, + msecs_to_jiffies(ISCI_TERMINATION_TIMEOUT_MSEC)); + + if (!timeleft) { + /* Strange condition - the termination of the TMF + * request timed-out. + */ + spin_lock_irqsave(&ihost->scic_lock, flags); + + /* If the TMF status has not changed, kill it. */ + if (tmf->status == SCI_FAILURE_TIMEOUT) + isci_request_mark_zombie(ihost, ireq); + + spin_unlock_irqrestore(&ihost->scic_lock, flags); + } } isci_print_tmf(tmf); @@ -501,48 +584,17 @@ static enum isci_request_status isci_task_validate_request_to_abort( return old_state; } -/** -* isci_request_cleanup_completed_loiterer() - This function will take care of -* the final cleanup on any request which has been explicitly terminated. -* @isci_host: This parameter specifies the ISCI host object -* @isci_device: This is the device to which the request is pending. -* @isci_request: This parameter specifies the terminated request object. -* @task: This parameter is the libsas I/O request. -*/ -static void isci_request_cleanup_completed_loiterer( - struct isci_host *isci_host, - struct isci_remote_device *isci_device, - struct isci_request *isci_request, - struct sas_task *task) +static int isci_request_is_dealloc_managed(enum isci_request_status stat) { - unsigned long flags; - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device=%p, request=%p, task=%p\n", - __func__, isci_device, isci_request, task); - - if (task != NULL) { - - spin_lock_irqsave(&task->task_state_lock, flags); - task->lldd_task = NULL; - - task->task_state_flags &= ~SAS_TASK_NEED_DEV_RESET; - - isci_set_task_doneflags(task); - - /* If this task is not in the abort path, call task_done. */ - if (!(task->task_state_flags & SAS_TASK_STATE_ABORTED)) { - - spin_unlock_irqrestore(&task->task_state_lock, flags); - task->task_done(task); - } else - spin_unlock_irqrestore(&task->task_state_lock, flags); - } - - if (isci_request != NULL) { - spin_lock_irqsave(&isci_host->scic_lock, flags); - list_del_init(&isci_request->dev_node); - spin_unlock_irqrestore(&isci_host->scic_lock, flags); + switch (stat) { + case aborted: + case aborting: + case terminating: + case completed: + case dead: + return true; + default: + return false; } } @@ -563,11 +615,9 @@ static void isci_terminate_request_core(struct isci_host *ihost, enum sci_status status = SCI_SUCCESS; bool was_terminated = false; bool needs_cleanup_handling = false; - enum isci_request_status request_status; unsigned long flags; unsigned long termination_completed = 1; struct completion *io_request_completion; - struct sas_task *task; dev_dbg(&ihost->pdev->dev, "%s: device = %p; request = %p\n", @@ -577,10 +627,6 @@ static void isci_terminate_request_core(struct isci_host *ihost, io_request_completion = isci_request->io_request_completion; - task = (isci_request->ttype == io_task) - ? isci_request_access_task(isci_request) - : NULL; - /* Note that we are not going to control * the target to abort the request. */ @@ -619,42 +665,27 @@ static void isci_terminate_request_core(struct isci_host *ihost, __func__, isci_request, io_request_completion); /* Wait here for the request to complete. */ - #define TERMINATION_TIMEOUT_MSEC 500 termination_completed = wait_for_completion_timeout( io_request_completion, - msecs_to_jiffies(TERMINATION_TIMEOUT_MSEC)); + msecs_to_jiffies(ISCI_TERMINATION_TIMEOUT_MSEC)); if (!termination_completed) { /* The request to terminate has timed out. */ - spin_lock_irqsave(&ihost->scic_lock, - flags); + spin_lock_irqsave(&ihost->scic_lock, flags); /* Check for state changes. */ - if (!test_bit(IREQ_TERMINATED, &isci_request->flags)) { + if (!test_bit(IREQ_TERMINATED, + &isci_request->flags)) { /* The best we can do is to have the * request die a silent death if it * ever really completes. - * - * Set the request state to "dead", - * and clear the task pointer so that - * an actual completion event callback - * doesn't do anything. */ - isci_request->status = dead; - isci_request->io_request_completion - = NULL; - - if (isci_request->ttype == io_task) { - - /* Break links with the - * sas_task. - */ - isci_request->ttype_ptr.io_task_ptr - = NULL; - } + isci_request_mark_zombie(ihost, + isci_request); + needs_cleanup_handling = true; } else termination_completed = 1; @@ -691,29 +722,28 @@ static void isci_terminate_request_core(struct isci_host *ihost, * needs to be detached and freed here. */ spin_lock_irqsave(&isci_request->state_lock, flags); - request_status = isci_request->status; - - if ((isci_request->ttype == io_task) /* TMFs are in their own thread */ - && ((request_status == aborted) - || (request_status == aborting) - || (request_status == terminating) - || (request_status == completed) - || (request_status == dead) - ) - ) { - - /* The completion routine won't free a request in - * the aborted/aborting/etc. states, so we do - * it here. - */ - needs_cleanup_handling = true; - } + + needs_cleanup_handling + = isci_request_is_dealloc_managed( + isci_request->status); + spin_unlock_irqrestore(&isci_request->state_lock, flags); } - if (needs_cleanup_handling) - isci_request_cleanup_completed_loiterer( - ihost, idev, isci_request, task); + if (needs_cleanup_handling) { + + dev_dbg(&ihost->pdev->dev, + "%s: cleanup isci_device=%p, request=%p\n", + __func__, idev, isci_request); + + if (isci_request != NULL) { + spin_lock_irqsave(&ihost->scic_lock, flags); + isci_free_tag(ihost, isci_request->io_tag); + isci_request_change_state(isci_request, unallocated); + list_del_init(&isci_request->dev_node); + spin_unlock_irqrestore(&ihost->scic_lock, flags); + } + } } } @@ -772,7 +802,9 @@ void isci_terminate_pending_requests(struct isci_host *ihost, dev_dbg(&ihost->pdev->dev, "%s: idev=%p request=%p; task=%p old_state=%d\n", __func__, idev, ireq, - ireq->ttype == io_task ? isci_request_access_task(ireq) : NULL, + (!test_bit(IREQ_TMF, &ireq->flags) + ? isci_request_access_task(ireq) + : NULL), old_state); /* If the old_state is started: @@ -889,22 +921,14 @@ int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun) "%s: domain_device=%p, isci_host=%p; isci_device=%p\n", __func__, domain_device, isci_host, isci_device); - if (isci_device) - set_bit(IDEV_EH, &isci_device->flags); + if (!isci_device) { + /* If the device is gone, stop the escalations. */ + dev_dbg(&isci_host->pdev->dev, "%s: No dev\n", __func__); - /* If there is a device reset pending on any request in the - * device's list, fail this LUN reset request in order to - * escalate to the device reset. - */ - if (!isci_device || - isci_device_is_reset_pending(isci_host, isci_device)) { - dev_dbg(&isci_host->pdev->dev, - "%s: No dev (%p), or " - "RESET PENDING: domain_device=%p\n", - __func__, isci_device, domain_device); - ret = TMF_RESP_FUNC_FAILED; + ret = TMF_RESP_FUNC_COMPLETE; goto out; } + set_bit(IDEV_EH, &isci_device->flags); /* Send the task management part of the reset. */ if (sas_protocol_ata(domain_device->tproto)) { @@ -1013,7 +1037,7 @@ int isci_task_abort_task(struct sas_task *task) struct isci_tmf tmf; int ret = TMF_RESP_FUNC_FAILED; unsigned long flags; - bool any_dev_reset = false; + int perform_termination = 0; /* Get the isci_request reference from the task. Note that * this check does not depend on the pending request list @@ -1035,89 +1059,34 @@ int isci_task_abort_task(struct sas_task *task) spin_unlock_irqrestore(&isci_host->scic_lock, flags); dev_dbg(&isci_host->pdev->dev, - "%s: task = %p\n", __func__, task); - - if (!isci_device || !old_request) - goto out; - - set_bit(IDEV_EH, &isci_device->flags); - - /* This version of the driver will fail abort requests for - * SATA/STP. Failing the abort request this way will cause the - * SCSI error handler thread to escalate to LUN reset - */ - if (sas_protocol_ata(task->task_proto)) { - dev_dbg(&isci_host->pdev->dev, - " task %p is for a STP/SATA device;" - " returning TMF_RESP_FUNC_FAILED\n" - " to cause a LUN reset...\n", task); - goto out; - } + "%s: dev = %p, task = %p, old_request == %p\n", + __func__, isci_device, task, old_request); - dev_dbg(&isci_host->pdev->dev, - "%s: old_request == %p\n", __func__, old_request); - - any_dev_reset = isci_device_is_reset_pending(isci_host, isci_device); - - spin_lock_irqsave(&task->task_state_lock, flags); - - any_dev_reset = any_dev_reset || (task->task_state_flags & SAS_TASK_NEED_DEV_RESET); + if (isci_device) + set_bit(IDEV_EH, &isci_device->flags); - /* If the extraction of the request reference from the task - * failed, then the request has been completed (or if there is a - * pending reset then this abort request function must be failed - * in order to escalate to the target reset). + /* Device reset conditions signalled in task_state_flags are the + * responsbility of libsas to observe at the start of the error + * handler thread. */ - if ((old_request == NULL) || any_dev_reset) { - - /* If the device reset task flag is set, fail the task - * management request. Otherwise, the original request - * has completed. - */ - if (any_dev_reset) { - - /* Turn off the task's DONE to make sure this - * task is escalated to a target reset. - */ - task->task_state_flags &= ~SAS_TASK_STATE_DONE; - - /* Make the reset happen as soon as possible. */ - task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; - - spin_unlock_irqrestore(&task->task_state_lock, flags); - - /* Fail the task management request in order to - * escalate to the target reset. - */ - ret = TMF_RESP_FUNC_FAILED; - - dev_dbg(&isci_host->pdev->dev, - "%s: Failing task abort in order to " - "escalate to target reset because\n" - "SAS_TASK_NEED_DEV_RESET is set for " - "task %p on dev %p\n", - __func__, task, isci_device); - - - } else { - /* The request has already completed and there - * is nothing to do here other than to set the task - * done bit, and indicate that the task abort function - * was sucessful. - */ - isci_set_task_doneflags(task); - - spin_unlock_irqrestore(&task->task_state_lock, flags); + if (!isci_device || !old_request) { + /* The request has already completed and there + * is nothing to do here other than to set the task + * done bit, and indicate that the task abort function + * was sucessful. + */ + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags |= SAS_TASK_STATE_DONE; + task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR | + SAS_TASK_STATE_PENDING); + spin_unlock_irqrestore(&task->task_state_lock, flags); - ret = TMF_RESP_FUNC_COMPLETE; + ret = TMF_RESP_FUNC_COMPLETE; - dev_dbg(&isci_host->pdev->dev, - "%s: abort task not needed for %p\n", - __func__, task); - } + dev_dbg(&isci_host->pdev->dev, + "%s: abort task not needed for %p\n", + __func__, task); goto out; - } else { - spin_unlock_irqrestore(&task->task_state_lock, flags); } spin_lock_irqsave(&isci_host->scic_lock, flags); @@ -1146,24 +1115,44 @@ int isci_task_abort_task(struct sas_task *task) goto out; } if (task->task_proto == SAS_PROTOCOL_SMP || + sas_protocol_ata(task->task_proto) || test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) { spin_unlock_irqrestore(&isci_host->scic_lock, flags); dev_dbg(&isci_host->pdev->dev, - "%s: SMP request (%d)" + "%s: %s request" " or complete_in_target (%d), thus no TMF\n", - __func__, (task->task_proto == SAS_PROTOCOL_SMP), + __func__, + ((task->task_proto == SAS_PROTOCOL_SMP) + ? "SMP" + : (sas_protocol_ata(task->task_proto) + ? "SATA/STP" + : "<other>") + ), test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)); - /* Set the state on the task. */ - isci_task_all_done(task); - - ret = TMF_RESP_FUNC_COMPLETE; + if (test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) { + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags |= SAS_TASK_STATE_DONE; + task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR | + SAS_TASK_STATE_PENDING); + spin_unlock_irqrestore(&task->task_state_lock, flags); + ret = TMF_RESP_FUNC_COMPLETE; + } else { + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR | + SAS_TASK_STATE_PENDING); + spin_unlock_irqrestore(&task->task_state_lock, flags); + } - /* Stopping and SMP devices are not sent a TMF, and are not - * reset, but the outstanding I/O request is terminated below. + /* STP and SMP devices are not sent a TMF, but the + * outstanding I/O request is terminated below. This is + * because SATA/STP and SMP discovery path timeouts directly + * call the abort task interface for cleanup. */ + perform_termination = 1; + } else { /* Fill in the tmf stucture */ isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort, @@ -1172,22 +1161,24 @@ int isci_task_abort_task(struct sas_task *task) spin_unlock_irqrestore(&isci_host->scic_lock, flags); - #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* half second timeout. */ + #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* 1/2 second timeout */ ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, ISCI_ABORT_TASK_TIMEOUT_MS); - if (ret != TMF_RESP_FUNC_COMPLETE) + if (ret == TMF_RESP_FUNC_COMPLETE) + perform_termination = 1; + else dev_dbg(&isci_host->pdev->dev, - "%s: isci_task_send_tmf failed\n", - __func__); + "%s: isci_task_send_tmf failed\n", __func__); } - if (ret == TMF_RESP_FUNC_COMPLETE) { + if (perform_termination) { set_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags); /* Clean up the request on our side, and wait for the aborted * I/O to complete. */ - isci_terminate_request_core(isci_host, isci_device, old_request); + isci_terminate_request_core(isci_host, isci_device, + old_request); } /* Make sure we do not leave a reference to aborted_io_completion */ @@ -1288,7 +1279,8 @@ isci_task_request_complete(struct isci_host *ihost, enum sci_task_status completion_status) { struct isci_tmf *tmf = isci_request_access_tmf(ireq); - struct completion *tmf_complete; + struct completion *tmf_complete = NULL; + struct completion *request_complete = ireq->io_request_completion; dev_dbg(&ihost->pdev->dev, "%s: request = %p, status=%d\n", @@ -1296,255 +1288,53 @@ isci_task_request_complete(struct isci_host *ihost, isci_request_change_state(ireq, completed); - tmf->status = completion_status; set_bit(IREQ_COMPLETE_IN_TARGET, &ireq->flags); - if (tmf->proto == SAS_PROTOCOL_SSP) { - memcpy(&tmf->resp.resp_iu, - &ireq->ssp.rsp, - SSP_RESP_IU_MAX_SIZE); - } else if (tmf->proto == SAS_PROTOCOL_SATA) { - memcpy(&tmf->resp.d2h_fis, - &ireq->stp.rsp, - sizeof(struct dev_to_host_fis)); + if (tmf) { + tmf->status = completion_status; + + if (tmf->proto == SAS_PROTOCOL_SSP) { + memcpy(&tmf->resp.resp_iu, + &ireq->ssp.rsp, + SSP_RESP_IU_MAX_SIZE); + } else if (tmf->proto == SAS_PROTOCOL_SATA) { + memcpy(&tmf->resp.d2h_fis, + &ireq->stp.rsp, + sizeof(struct dev_to_host_fis)); + } + /* PRINT_TMF( ((struct isci_tmf *)request->task)); */ + tmf_complete = tmf->complete; } - - /* PRINT_TMF( ((struct isci_tmf *)request->task)); */ - tmf_complete = tmf->complete; - sci_controller_complete_io(ihost, ireq->target_device, ireq); /* set the 'terminated' flag handle to make sure it cannot be terminated * or completed again. */ set_bit(IREQ_TERMINATED, &ireq->flags); - isci_request_change_state(ireq, unallocated); - list_del_init(&ireq->dev_node); - - /* The task management part completes last. */ - complete(tmf_complete); -} - -static void isci_smp_task_timedout(unsigned long _task) -{ - struct sas_task *task = (void *) _task; - unsigned long flags; - - spin_lock_irqsave(&task->task_state_lock, flags); - if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) - task->task_state_flags |= SAS_TASK_STATE_ABORTED; - spin_unlock_irqrestore(&task->task_state_lock, flags); - - complete(&task->completion); -} - -static void isci_smp_task_done(struct sas_task *task) -{ - if (!del_timer(&task->timer)) - return; - complete(&task->completion); -} - -static int isci_smp_execute_task(struct isci_host *ihost, - struct domain_device *dev, void *req, - int req_size, void *resp, int resp_size) -{ - int res, retry; - struct sas_task *task = NULL; - - for (retry = 0; retry < 3; retry++) { - task = sas_alloc_task(GFP_KERNEL); - if (!task) - return -ENOMEM; - - task->dev = dev; - task->task_proto = dev->tproto; - sg_init_one(&task->smp_task.smp_req, req, req_size); - sg_init_one(&task->smp_task.smp_resp, resp, resp_size); - - task->task_done = isci_smp_task_done; - - task->timer.data = (unsigned long) task; - task->timer.function = isci_smp_task_timedout; - task->timer.expires = jiffies + 10*HZ; - add_timer(&task->timer); - - res = isci_task_execute_task(task, 1, GFP_KERNEL); - - if (res) { - del_timer(&task->timer); - dev_dbg(&ihost->pdev->dev, - "%s: executing SMP task failed:%d\n", - __func__, res); - goto ex_err; - } - - wait_for_completion(&task->completion); - res = -ECOMM; - if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) { - dev_dbg(&ihost->pdev->dev, - "%s: smp task timed out or aborted\n", - __func__); - isci_task_abort_task(task); - if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) { - dev_dbg(&ihost->pdev->dev, - "%s: SMP task aborted and not done\n", - __func__); - goto ex_err; - } - } - if (task->task_status.resp == SAS_TASK_COMPLETE && - task->task_status.stat == SAM_STAT_GOOD) { - res = 0; - break; - } - if (task->task_status.resp == SAS_TASK_COMPLETE && - task->task_status.stat == SAS_DATA_UNDERRUN) { - /* no error, but return the number of bytes of - * underrun */ - res = task->task_status.residual; - break; - } - if (task->task_status.resp == SAS_TASK_COMPLETE && - task->task_status.stat == SAS_DATA_OVERRUN) { - res = -EMSGSIZE; - break; - } else { - dev_dbg(&ihost->pdev->dev, - "%s: task to dev %016llx response: 0x%x " - "status 0x%x\n", __func__, - SAS_ADDR(dev->sas_addr), - task->task_status.resp, - task->task_status.stat); - sas_free_task(task); - task = NULL; - } - } -ex_err: - BUG_ON(retry == 3 && task != NULL); - sas_free_task(task); - return res; -} - -#define DISCOVER_REQ_SIZE 16 -#define DISCOVER_RESP_SIZE 56 - -int isci_smp_get_phy_attached_dev_type(struct isci_host *ihost, - struct domain_device *dev, - int phy_id, int *adt) -{ - struct smp_resp *disc_resp; - u8 *disc_req; - int res; - - disc_resp = kzalloc(DISCOVER_RESP_SIZE, GFP_KERNEL); - if (!disc_resp) - return -ENOMEM; - - disc_req = kzalloc(DISCOVER_REQ_SIZE, GFP_KERNEL); - if (disc_req) { - disc_req[0] = SMP_REQUEST; - disc_req[1] = SMP_DISCOVER; - disc_req[9] = phy_id; - } else { - kfree(disc_resp); - return -ENOMEM; - } - res = isci_smp_execute_task(ihost, dev, disc_req, DISCOVER_REQ_SIZE, - disc_resp, DISCOVER_RESP_SIZE); - if (!res) { - if (disc_resp->result != SMP_RESP_FUNC_ACC) - res = disc_resp->result; - else - *adt = disc_resp->disc.attached_dev_type; + /* As soon as something is in the terminate path, deallocation is + * managed there. Note that the final non-managed state of a task + * request is "completed". + */ + if ((ireq->status == completed) || + !isci_request_is_dealloc_managed(ireq->status)) { + isci_request_change_state(ireq, unallocated); + isci_free_tag(ihost, ireq->io_tag); + list_del_init(&ireq->dev_node); } - kfree(disc_req); - kfree(disc_resp); - - return res; -} - -static void isci_wait_for_smp_phy_reset(struct isci_remote_device *idev, int phy_num) -{ - struct domain_device *dev = idev->domain_dev; - struct isci_port *iport = idev->isci_port; - struct isci_host *ihost = iport->isci_host; - int res, iteration = 0, attached_device_type; - #define STP_WAIT_MSECS 25000 - unsigned long tmo = msecs_to_jiffies(STP_WAIT_MSECS); - unsigned long deadline = jiffies + tmo; - enum { - SMP_PHYWAIT_PHYDOWN, - SMP_PHYWAIT_PHYUP, - SMP_PHYWAIT_DONE - } phy_state = SMP_PHYWAIT_PHYDOWN; - - /* While there is time, wait for the phy to go away and come back */ - while (time_is_after_jiffies(deadline) && phy_state != SMP_PHYWAIT_DONE) { - int event = atomic_read(&iport->event); - - ++iteration; - - tmo = wait_event_timeout(ihost->eventq, - event != atomic_read(&iport->event) || - !test_bit(IPORT_BCN_BLOCKED, &iport->flags), - tmo); - /* link down, stop polling */ - if (!test_bit(IPORT_BCN_BLOCKED, &iport->flags)) - break; - dev_dbg(&ihost->pdev->dev, - "%s: iport %p, iteration %d," - " phase %d: time_remaining %lu, bcns = %d\n", - __func__, iport, iteration, phy_state, - tmo, test_bit(IPORT_BCN_PENDING, &iport->flags)); - - res = isci_smp_get_phy_attached_dev_type(ihost, dev, phy_num, - &attached_device_type); - tmo = deadline - jiffies; - - if (res) { - dev_dbg(&ihost->pdev->dev, - "%s: iteration %d, phase %d:" - " SMP error=%d, time_remaining=%lu\n", - __func__, iteration, phy_state, res, tmo); - break; - } - dev_dbg(&ihost->pdev->dev, - "%s: iport %p, iteration %d," - " phase %d: time_remaining %lu, bcns = %d, " - "attdevtype = %x\n", - __func__, iport, iteration, phy_state, - tmo, test_bit(IPORT_BCN_PENDING, &iport->flags), - attached_device_type); - - switch (phy_state) { - case SMP_PHYWAIT_PHYDOWN: - /* Has the device gone away? */ - if (!attached_device_type) - phy_state = SMP_PHYWAIT_PHYUP; - - break; - - case SMP_PHYWAIT_PHYUP: - /* Has the device come back? */ - if (attached_device_type) - phy_state = SMP_PHYWAIT_DONE; - break; - - case SMP_PHYWAIT_DONE: - break; - } + /* "request_complete" is set if the task was being terminated. */ + if (request_complete) + complete(request_complete); - } - dev_dbg(&ihost->pdev->dev, "%s: done\n", __func__); + /* The task management part completes last. */ + if (tmf_complete) + complete(tmf_complete); } static int isci_reset_device(struct isci_host *ihost, struct isci_remote_device *idev) { struct sas_phy *phy = sas_find_local_phy(idev->domain_dev); - struct isci_port *iport = idev->isci_port; enum sci_status status; unsigned long flags; int rc; @@ -1564,13 +1354,6 @@ static int isci_reset_device(struct isci_host *ihost, } spin_unlock_irqrestore(&ihost->scic_lock, flags); - /* Make sure all pending requests are able to be fully terminated. */ - isci_device_clear_reset_pending(ihost, idev); - - /* If this is a device on an expander, disable BCN processing. */ - if (!scsi_is_sas_phy_local(phy)) - set_bit(IPORT_BCN_BLOCKED, &iport->flags); - rc = sas_phy_reset(phy, true); /* Terminate in-progress I/O now. */ @@ -1581,21 +1364,6 @@ static int isci_reset_device(struct isci_host *ihost, status = sci_remote_device_reset_complete(idev); spin_unlock_irqrestore(&ihost->scic_lock, flags); - /* If this is a device on an expander, bring the phy back up. */ - if (!scsi_is_sas_phy_local(phy)) { - /* A phy reset will cause the device to go away then reappear. - * Since libsas will take action on incoming BCNs (eg. remove - * a device going through an SMP phy-control driven reset), - * we need to wait until the phy comes back up before letting - * discovery proceed in libsas. - */ - isci_wait_for_smp_phy_reset(idev, phy->number); - - spin_lock_irqsave(&ihost->scic_lock, flags); - isci_port_bcn_enable(ihost, idev->isci_port); - spin_unlock_irqrestore(&ihost->scic_lock, flags); - } - if (status != SCI_SUCCESS) { dev_dbg(&ihost->pdev->dev, "%s: sci_remote_device_reset_complete(%p) " diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index 15b18d15899..bc78c0a41d5 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -58,6 +58,8 @@ #include <scsi/sas_ata.h> #include "host.h" +#define ISCI_TERMINATION_TIMEOUT_MSEC 500 + struct isci_request; /** @@ -224,35 +226,6 @@ enum isci_completion_selection { isci_perform_error_io_completion /* Use sas_task_abort */ }; -static inline void isci_set_task_doneflags( - struct sas_task *task) -{ - /* Since no futher action will be taken on this task, - * make sure to mark it complete from the lldd perspective. - */ - task->task_state_flags |= SAS_TASK_STATE_DONE; - task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; - task->task_state_flags &= ~SAS_TASK_STATE_PENDING; -} -/** - * isci_task_all_done() - This function clears the task bits to indicate the - * LLDD is done with the task. - * - * - */ -static inline void isci_task_all_done( - struct sas_task *task) -{ - unsigned long flags; - - /* Since no futher action will be taken on this task, - * make sure to mark it complete from the lldd perspective. - */ - spin_lock_irqsave(&task->task_state_lock, flags); - isci_set_task_doneflags(task); - spin_unlock_irqrestore(&task->task_state_lock, flags); -} - /** * isci_task_set_completion_status() - This function sets the completion status * for the request. @@ -334,7 +307,9 @@ isci_task_set_completion_status( /* Fall through to the normal case... */ case isci_perform_normal_io_completion: /* Normal notification (task_done) */ - isci_set_task_doneflags(task); + task->task_state_flags |= SAS_TASK_STATE_DONE; + task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR | + SAS_TASK_STATE_PENDING); break; default: WARN_ONCE(1, "unknown task_notification_selection: %d\n", diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 7c055fdca45..1b22130035d 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -469,6 +469,7 @@ static int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp, struct fc_frame_header *fh = fc_frame_header_get(fp); int error; u32 f_ctl; + u8 fh_type = fh->fh_type; ep = fc_seq_exch(sp); WARN_ON((ep->esb_stat & ESB_ST_SEQ_INIT) != ESB_ST_SEQ_INIT); @@ -493,7 +494,7 @@ static int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp, */ error = lport->tt.frame_send(lport, fp); - if (fh->fh_type == FC_TYPE_BLS) + if (fh_type == FC_TYPE_BLS) return error; /* @@ -1792,6 +1793,9 @@ restart: goto restart; } } + pool->next_index = 0; + pool->left = FC_XID_UNKNOWN; + pool->right = FC_XID_UNKNOWN; spin_unlock_bh(&pool->lock); } @@ -2280,6 +2284,7 @@ struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lport, goto free_mempool; for_each_possible_cpu(cpu) { pool = per_cpu_ptr(mp->pool, cpu); + pool->next_index = 0; pool->left = FC_XID_UNKNOWN; pool->right = FC_XID_UNKNOWN; spin_lock_init(&pool->lock); diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index 628f347404f..2cb12b9cd3e 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -1030,16 +1030,8 @@ static void fc_lport_enter_reset(struct fc_lport *lport) FCH_EVT_LIPRESET, 0); fc_vports_linkchange(lport); fc_lport_reset_locked(lport); - if (lport->link_up) { - /* - * Wait upto resource allocation time out before - * doing re-login since incomplete FIP exchanged - * from last session may collide with exchanges - * in new session. - */ - msleep(lport->r_a_tov); + if (lport->link_up) fc_lport_enter_flogi(lport); - } } /** @@ -1481,6 +1473,7 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, void *lp_arg) { struct fc_lport *lport = lp_arg; + struct fc_frame_header *fh; struct fc_els_flogi *flp; u32 did; u16 csp_flags; @@ -1508,49 +1501,56 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, goto err; } + fh = fc_frame_header_get(fp); did = fc_frame_did(fp); - if (fc_frame_payload_op(fp) == ELS_LS_ACC && did) { - flp = fc_frame_payload_get(fp, sizeof(*flp)); - if (flp) { - mfs = ntohs(flp->fl_csp.sp_bb_data) & - FC_SP_BB_DATA_MASK; - if (mfs >= FC_SP_MIN_MAX_PAYLOAD && - mfs < lport->mfs) - lport->mfs = mfs; - csp_flags = ntohs(flp->fl_csp.sp_features); - r_a_tov = ntohl(flp->fl_csp.sp_r_a_tov); - e_d_tov = ntohl(flp->fl_csp.sp_e_d_tov); - if (csp_flags & FC_SP_FT_EDTR) - e_d_tov /= 1000000; - - lport->npiv_enabled = !!(csp_flags & FC_SP_FT_NPIV_ACC); - - if ((csp_flags & FC_SP_FT_FPORT) == 0) { - if (e_d_tov > lport->e_d_tov) - lport->e_d_tov = e_d_tov; - lport->r_a_tov = 2 * e_d_tov; - fc_lport_set_port_id(lport, did, fp); - printk(KERN_INFO "host%d: libfc: " - "Port (%6.6x) entered " - "point-to-point mode\n", - lport->host->host_no, did); - fc_lport_ptp_setup(lport, fc_frame_sid(fp), - get_unaligned_be64( - &flp->fl_wwpn), - get_unaligned_be64( - &flp->fl_wwnn)); - } else { - lport->e_d_tov = e_d_tov; - lport->r_a_tov = r_a_tov; - fc_host_fabric_name(lport->host) = - get_unaligned_be64(&flp->fl_wwnn); - fc_lport_set_port_id(lport, did, fp); - fc_lport_enter_dns(lport); - } - } - } else { - FC_LPORT_DBG(lport, "FLOGI RJT or bad response\n"); + if (fh->fh_r_ctl != FC_RCTL_ELS_REP || did == 0 || + fc_frame_payload_op(fp) != ELS_LS_ACC) { + FC_LPORT_DBG(lport, "FLOGI not accepted or bad response\n"); fc_lport_error(lport, fp); + goto err; + } + + flp = fc_frame_payload_get(fp, sizeof(*flp)); + if (!flp) { + FC_LPORT_DBG(lport, "FLOGI bad response\n"); + fc_lport_error(lport, fp); + goto err; + } + + mfs = ntohs(flp->fl_csp.sp_bb_data) & + FC_SP_BB_DATA_MASK; + if (mfs >= FC_SP_MIN_MAX_PAYLOAD && + mfs < lport->mfs) + lport->mfs = mfs; + csp_flags = ntohs(flp->fl_csp.sp_features); + r_a_tov = ntohl(flp->fl_csp.sp_r_a_tov); + e_d_tov = ntohl(flp->fl_csp.sp_e_d_tov); + if (csp_flags & FC_SP_FT_EDTR) + e_d_tov /= 1000000; + + lport->npiv_enabled = !!(csp_flags & FC_SP_FT_NPIV_ACC); + + if ((csp_flags & FC_SP_FT_FPORT) == 0) { + if (e_d_tov > lport->e_d_tov) + lport->e_d_tov = e_d_tov; + lport->r_a_tov = 2 * e_d_tov; + fc_lport_set_port_id(lport, did, fp); + printk(KERN_INFO "host%d: libfc: " + "Port (%6.6x) entered " + "point-to-point mode\n", + lport->host->host_no, did); + fc_lport_ptp_setup(lport, fc_frame_sid(fp), + get_unaligned_be64( + &flp->fl_wwpn), + get_unaligned_be64( + &flp->fl_wwnn)); + } else { + lport->e_d_tov = e_d_tov; + lport->r_a_tov = r_a_tov; + fc_host_fabric_name(lport->host) = + get_unaligned_be64(&flp->fl_wwnn); + fc_lport_set_port_id(lport, did, fp); + fc_lport_enter_dns(lport); } out: diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h index 3105d5e8d90..8dc1b32918d 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2000-2010 LSI Corporation. + * Copyright (c) 2000-2011 LSI Corporation. * * * Name: mpi2.h @@ -8,7 +8,7 @@ * scatter/gather formats. * Creation Date: June 21, 2006 * - * mpi2.h Version: 02.00.18 + * mpi2.h Version: 02.00.20 * * Version History * --------------- @@ -66,6 +66,9 @@ * 08-11-10 02.00.17 Bumped MPI2_HEADER_VERSION_UNIT. * 11-10-10 02.00.18 Bumped MPI2_HEADER_VERSION_UNIT. * Added MPI2_IEEE_SGE_FLAGS_SYSTEMPLBCPI_ADDR define. + * 02-23-11 02.00.19 Bumped MPI2_HEADER_VERSION_UNIT. + * Added MPI2_FUNCTION_SEND_HOST_MESSAGE. + * 03-09-11 02.00.20 Bumped MPI2_HEADER_VERSION_UNIT. * -------------------------------------------------------------------------- */ @@ -91,7 +94,7 @@ #define MPI2_VERSION_02_00 (0x0200) /* versioning for this MPI header set */ -#define MPI2_HEADER_VERSION_UNIT (0x12) +#define MPI2_HEADER_VERSION_UNIT (0x14) #define MPI2_HEADER_VERSION_DEV (0x00) #define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) #define MPI2_HEADER_VERSION_UNIT_SHIFT (8) @@ -515,6 +518,8 @@ typedef union _MPI2_REPLY_DESCRIPTORS_UNION #define MPI2_FUNCTION_HOST_BASED_DISCOVERY_ACTION (0x2F) /* Power Management Control */ #define MPI2_FUNCTION_PWR_MGMT_CONTROL (0x30) +/* Send Host Message */ +#define MPI2_FUNCTION_SEND_HOST_MESSAGE (0x31) /* beginning of product-specific range */ #define MPI2_FUNCTION_MIN_PRODUCT_SPECIFIC (0xF0) /* end of product-specific range */ diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h index 61475a6480e..cfd95b4e300 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2010 LSI Corporation. + * Copyright (c) 2000-2011 LSI Corporation. * * * Name: mpi2_cnfg.h * Title: MPI Configuration messages and pages * Creation Date: November 10, 2006 * - * mpi2_cnfg.h Version: 02.00.17 + * mpi2_cnfg.h Version: 02.00.19 * * Version History * --------------- @@ -134,6 +134,12 @@ * to MPI2_CONFIG_PAGE_IO_UNIT_7. * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure. + * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST. + * Added IO Unit Page 8, IO Unit Page 9, + * and IO Unit Page 10. + * Added SASNotifyPrimitiveMasks field to + * MPI2_CONFIG_PAGE_IOC_7. + * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec). * -------------------------------------------------------------------------- */ @@ -329,7 +335,9 @@ typedef struct _MPI2_CONFIG_REQUEST U8 VP_ID; /* 0x08 */ U8 VF_ID; /* 0x09 */ U16 Reserved1; /* 0x0A */ - U32 Reserved2; /* 0x0C */ + U8 Reserved2; /* 0x0C */ + U8 ProxyVF_ID; /* 0x0D */ + U16 Reserved4; /* 0x0E */ U32 Reserved3; /* 0x10 */ MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */ U32 PageAddress; /* 0x18 */ @@ -915,6 +923,120 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 { #define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01) #define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02) +/* IO Unit Page 8 */ + +#define MPI2_IOUNIT8_NUM_THRESHOLDS (4) + +typedef struct _MPI2_IOUNIT8_SENSOR { + U16 Flags; /* 0x00 */ + U16 Reserved1; /* 0x02 */ + U16 + Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /* 0x04 */ + U32 Reserved2; /* 0x0C */ + U32 Reserved3; /* 0x10 */ + U32 Reserved4; /* 0x14 */ +} MPI2_IOUNIT8_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT8_SENSOR, +Mpi2IOUnit8Sensor_t, MPI2_POINTER pMpi2IOUnit8Sensor_t; + +/* defines for IO Unit Page 8 Sensor Flags field */ +#define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008) +#define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004) +#define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002) +#define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumSensors at runtime. + */ +#ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES +#define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U8 NumSensors; /* 0x0C */ + U8 PollingInterval; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + MPI2_IOUNIT8_SENSOR + Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/* 0x10 */ +} MPI2_CONFIG_PAGE_IO_UNIT_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_8, +Mpi2IOUnitPage8_t, MPI2_POINTER pMpi2IOUnitPage8_t; + +#define MPI2_IOUNITPAGE8_PAGEVERSION (0x00) + + +/* IO Unit Page 9 */ + +typedef struct _MPI2_IOUNIT9_SENSOR { + U16 CurrentTemperature; /* 0x00 */ + U16 Reserved1; /* 0x02 */ + U8 Flags; /* 0x04 */ + U8 Reserved2; /* 0x05 */ + U16 Reserved3; /* 0x06 */ + U32 Reserved4; /* 0x08 */ + U32 Reserved5; /* 0x0C */ +} MPI2_IOUNIT9_SENSOR, MPI2_POINTER PTR_MPI2_IOUNIT9_SENSOR, +Mpi2IOUnit9Sensor_t, MPI2_POINTER pMpi2IOUnit9Sensor_t; + +/* defines for IO Unit Page 9 Sensor Flags field */ +#define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumSensors at runtime. + */ +#ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES +#define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U8 NumSensors; /* 0x0C */ + U8 Reserved4; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + MPI2_IOUNIT9_SENSOR + Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/* 0x10 */ +} MPI2_CONFIG_PAGE_IO_UNIT_9, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_9, +Mpi2IOUnitPage9_t, MPI2_POINTER pMpi2IOUnitPage9_t; + +#define MPI2_IOUNITPAGE9_PAGEVERSION (0x00) + + +/* IO Unit Page 10 */ + +typedef struct _MPI2_IOUNIT10_FUNCTION { + U8 CreditPercent; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ +} MPI2_IOUNIT10_FUNCTION, MPI2_POINTER PTR_MPI2_IOUNIT10_FUNCTION, +Mpi2IOUnit10Function_t, MPI2_POINTER pMpi2IOUnit10Function_t; + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check the value returned for NumFunctions at runtime. + */ +#ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES +#define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 { + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumFunctions; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U32 Reserved3; /* 0x08 */ + U32 Reserved4; /* 0x0C */ + MPI2_IOUNIT10_FUNCTION + Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/* 0x10 */ +} MPI2_CONFIG_PAGE_IO_UNIT_10, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_10, +Mpi2IOUnitPage10_t, MPI2_POINTER pMpi2IOUnitPage10_t; + +#define MPI2_IOUNITPAGE10_PAGEVERSION (0x01) + /**************************************************************************** @@ -1022,12 +1144,12 @@ typedef struct _MPI2_CONFIG_PAGE_IOC_7 U32 Reserved1; /* 0x04 */ U32 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */ U16 SASBroadcastPrimitiveMasks; /* 0x18 */ - U16 Reserved2; /* 0x1A */ + U16 SASNotifyPrimitiveMasks; /* 0x1A */ U32 Reserved3; /* 0x1C */ } MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7, Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t; -#define MPI2_IOCPAGE7_PAGEVERSION (0x01) +#define MPI2_IOCPAGE7_PAGEVERSION (0x02) /* IOC Page 8 */ @@ -2070,16 +2192,16 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 { #define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00) /* defines for PowerManagementCapabilities field */ -#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x000001000) -#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x000000800) -#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x000000400) -#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x000000200) -#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x000000100) -#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x000000010) -#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x000000008) -#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x000000004) -#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x000000002) -#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x000000001) +#define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x00001000) +#define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x00000800) +#define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x00000400) +#define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x00000200) +#define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x00000100) +#define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x00000010) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002) +#define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001) @@ -2266,6 +2388,7 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 /* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */ /* values for SAS Device Page 0 Flags field */ +#define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE (0x8000) #define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000) #define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800) #define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400) diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h index 1f0c190d336..93d9b6956d0 100644 --- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h +++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h @@ -1,12 +1,12 @@ /* - * Copyright (c) 2000-2010 LSI Corporation. + * Copyright (c) 2000-2011 LSI Corporation. * * * Name: mpi2_ioc.h * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages * Creation Date: October 11, 2006 * - * mpi2_ioc.h Version: 02.00.16 + * mpi2_ioc.h Version: 02.00.17 * * Version History * --------------- @@ -104,6 +104,12 @@ * 05-12-10 02.00.15 Marked Task Set Full Event as obsolete. * Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define. * 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC. + * 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added + * SASNotifyPrimitiveMasks field to + * MPI2_EVENT_NOTIFICATION_REQUEST. + * Added Temperature Threshold Event. + * Added Host Message Event. + * Added Send Host Message request and reply. * -------------------------------------------------------------------------- */ @@ -421,7 +427,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST U32 Reserved6; /* 0x10 */ U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */ U16 SASBroadcastPrimitiveMasks; /* 0x24 */ - U16 Reserved7; /* 0x26 */ + U16 SASNotifyPrimitiveMasks; /* 0x26 */ U32 Reserved8; /* 0x28 */ } MPI2_EVENT_NOTIFICATION_REQUEST, MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST, @@ -476,6 +482,9 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY #define MPI2_EVENT_GPIO_INTERRUPT (0x0023) #define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024) #define MPI2_EVENT_SAS_QUIESCE (0x0025) +#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026) +#define MPI2_EVENT_TEMP_THRESHOLD (0x0027) +#define MPI2_EVENT_HOST_MESSAGE (0x0028) /* Log Entry Added Event data */ @@ -507,6 +516,39 @@ typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT { MPI2_POINTER PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT, Mpi2EventDataGpioInterrupt_t, MPI2_POINTER pMpi2EventDataGpioInterrupt_t; +/* Temperature Threshold Event data */ + +typedef struct _MPI2_EVENT_DATA_TEMPERATURE { + U16 Status; /* 0x00 */ + U8 SensorNum; /* 0x02 */ + U8 Reserved1; /* 0x03 */ + U16 CurrentTemperature; /* 0x04 */ + U16 Reserved2; /* 0x06 */ + U32 Reserved3; /* 0x08 */ + U32 Reserved4; /* 0x0C */ +} MPI2_EVENT_DATA_TEMPERATURE, +MPI2_POINTER PTR_MPI2_EVENT_DATA_TEMPERATURE, +Mpi2EventDataTemperature_t, MPI2_POINTER pMpi2EventDataTemperature_t; + +/* Temperature Threshold Event data Status bits */ +#define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008) +#define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004) +#define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002) +#define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001) + + +/* Host Message Event data */ + +typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE { + U8 SourceVF_ID; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 Reserved3; /* 0x04 */ + U32 HostData[1]; /* 0x08 */ +} MPI2_EVENT_DATA_HOST_MESSAGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_HOST_MESSAGE, +Mpi2EventDataHostMessage_t, MPI2_POINTER pMpi2EventDataHostMessage_t; + + /* Hard Reset Received Event data */ typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED @@ -749,6 +791,24 @@ typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE #define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) #define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) +/* SAS Notify Primitive Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE { + U8 PhyNum; /* 0x00 */ + U8 Port; /* 0x01 */ + U8 Reserved1; /* 0x02 */ + U8 Primitive; /* 0x03 */ +} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, +MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE, +Mpi2EventDataSasNotifyPrimitive_t, +MPI2_POINTER pMpi2EventDataSasNotifyPrimitive_t; + +/* defines for the Primitive field */ +#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01) +#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02) +#define MPI2_EVENT_NOTIFY_RESERVED1 (0x03) +#define MPI2_EVENT_NOTIFY_RESERVED2 (0x04) + /* SAS Initiator Device Status Change Event data */ @@ -1001,6 +1061,53 @@ typedef struct _MPI2_EVENT_ACK_REPLY /**************************************************************************** +* SendHostMessage message +****************************************************************************/ + +/* SendHostMessage Request message */ +typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST { + U16 HostDataLength; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved1; /* 0x04 */ + U8 Reserved2; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U8 Reserved4; /* 0x0C */ + U8 DestVF_ID; /* 0x0D */ + U16 Reserved5; /* 0x0E */ + U32 Reserved6; /* 0x10 */ + U32 Reserved7; /* 0x14 */ + U32 Reserved8; /* 0x18 */ + U32 Reserved9; /* 0x1C */ + U32 Reserved10; /* 0x20 */ + U32 HostData[1]; /* 0x24 */ +} MPI2_SEND_HOST_MESSAGE_REQUEST, +MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REQUEST, +Mpi2SendHostMessageRequest_t, MPI2_POINTER pMpi2SendHostMessageRequest_t; + + +/* SendHostMessage Reply message */ +typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY { + U16 HostDataLength; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved1; /* 0x04 */ + U8 Reserved2; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_SEND_HOST_MESSAGE_REPLY, MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REPLY, +Mpi2SendHostMessageReply_t, MPI2_POINTER pMpi2SendHostMessageReply_t; + + +/**************************************************************************** * FWDownload message ****************************************************************************/ diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 81209ca8727..beda04a8404 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -81,6 +81,15 @@ static int missing_delay[2] = {-1, -1}; module_param_array(missing_delay, int, NULL, 0); MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay"); +static int mpt2sas_fwfault_debug; +MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault " + "and halt firmware - (default=0)"); + +static int disable_discovery = -1; +module_param(disable_discovery, int, 0); +MODULE_PARM_DESC(disable_discovery, " disable discovery "); + + /* diag_buffer_enable is bitwise * bit 0 set = TRACE * bit 1 set = SNAPSHOT @@ -93,14 +102,6 @@ module_param(diag_buffer_enable, int, 0); MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers " "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)"); -static int mpt2sas_fwfault_debug; -MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault " - "and halt firmware - (default=0)"); - -static int disable_discovery = -1; -module_param(disable_discovery, int, 0); -MODULE_PARM_DESC(disable_discovery, " disable discovery "); - /** * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug. * @@ -691,6 +692,7 @@ mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); } ioc->base_cmds.status &= ~MPT2_CMD_PENDING; + complete(&ioc->base_cmds.done); return 1; } @@ -3470,6 +3472,58 @@ _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) } /** + * mpt2sas_port_enable_done - command completion routine for port enable + * @ioc: per adapter object + * @smid: system request message index + * @msix_index: MSIX table index supplied by the OS + * @reply: reply message frame(lower 32bit addr) + * + * Return 1 meaning mf should be freed from _base_interrupt + * 0 means the mf is freed from this function. + */ +u8 +mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, + u32 reply) +{ + MPI2DefaultReply_t *mpi_reply; + u16 ioc_status; + + mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply); + if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK) + return 1; + + if (ioc->port_enable_cmds.status == MPT2_CMD_NOT_USED) + return 1; + + ioc->port_enable_cmds.status |= MPT2_CMD_COMPLETE; + if (mpi_reply) { + ioc->port_enable_cmds.status |= MPT2_CMD_REPLY_VALID; + memcpy(ioc->port_enable_cmds.reply, mpi_reply, + mpi_reply->MsgLength*4); + } + ioc->port_enable_cmds.status &= ~MPT2_CMD_PENDING; + + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) + ioc->port_enable_failed = 1; + + if (ioc->is_driver_loading) { + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + mpt2sas_port_enable_complete(ioc); + return 1; + } else { + ioc->start_scan_failed = ioc_status; + ioc->start_scan = 0; + return 1; + } + } + complete(&ioc->port_enable_cmds.done); + return 1; +} + + +/** * _base_send_port_enable - send port_enable(discovery stuff) to firmware * @ioc: per adapter object * @sleep_flag: CAN_SLEEP or NO_SLEEP @@ -3480,67 +3534,151 @@ static int _base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) { Mpi2PortEnableRequest_t *mpi_request; - u32 ioc_state; + Mpi2PortEnableReply_t *mpi_reply; unsigned long timeleft; int r = 0; u16 smid; + u16 ioc_status; printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name); - if (ioc->base_cmds.status & MPT2_CMD_PENDING) { + if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) { printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n", ioc->name, __func__); return -EAGAIN; } - smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx); + smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx); if (!smid) { printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", ioc->name, __func__); return -EAGAIN; } - ioc->base_cmds.status = MPT2_CMD_PENDING; + ioc->port_enable_cmds.status = MPT2_CMD_PENDING; mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); - ioc->base_cmds.smid = smid; + ioc->port_enable_cmds.smid = smid; memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t)); mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE; - mpi_request->VF_ID = 0; /* TODO */ - mpi_request->VP_ID = 0; + init_completion(&ioc->port_enable_cmds.done); mpt2sas_base_put_smid_default(ioc, smid); - init_completion(&ioc->base_cmds.done); - timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, + timeleft = wait_for_completion_timeout(&ioc->port_enable_cmds.done, 300*HZ); - if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) { + if (!(ioc->port_enable_cmds.status & MPT2_CMD_COMPLETE)) { printk(MPT2SAS_ERR_FMT "%s: timeout\n", ioc->name, __func__); _debug_dump_mf(mpi_request, sizeof(Mpi2PortEnableRequest_t)/4); - if (ioc->base_cmds.status & MPT2_CMD_RESET) + if (ioc->port_enable_cmds.status & MPT2_CMD_RESET) r = -EFAULT; else r = -ETIME; goto out; - } else - dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: complete\n", - ioc->name, __func__)); + } + mpi_reply = ioc->port_enable_cmds.reply; - ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_OPERATIONAL, - 60, sleep_flag); - if (ioc_state) { - printk(MPT2SAS_ERR_FMT "%s: failed going to operational state " - " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state); + ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { + printk(MPT2SAS_ERR_FMT "%s: failed with (ioc_status=0x%08x)\n", + ioc->name, __func__, ioc_status); r = -EFAULT; + goto out; } out: - ioc->base_cmds.status = MPT2_CMD_NOT_USED; - printk(MPT2SAS_INFO_FMT "port enable: %s\n", - ioc->name, ((r == 0) ? "SUCCESS" : "FAILED")); + ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED; + printk(MPT2SAS_INFO_FMT "port enable: %s\n", ioc->name, ((r == 0) ? + "SUCCESS" : "FAILED")); return r; } /** + * mpt2sas_port_enable - initiate firmware discovery (don't wait for reply) + * @ioc: per adapter object + * + * Returns 0 for success, non-zero for failure. + */ +int +mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc) +{ + Mpi2PortEnableRequest_t *mpi_request; + u16 smid; + + printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name); + + if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) { + printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n", + ioc->name, __func__); + return -EAGAIN; + } + + smid = mpt2sas_base_get_smid(ioc, ioc->port_enable_cb_idx); + if (!smid) { + printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n", + ioc->name, __func__); + return -EAGAIN; + } + + ioc->port_enable_cmds.status = MPT2_CMD_PENDING; + mpi_request = mpt2sas_base_get_msg_frame(ioc, smid); + ioc->port_enable_cmds.smid = smid; + memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t)); + mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE; + + mpt2sas_base_put_smid_default(ioc, smid); + return 0; +} + +/** + * _base_determine_wait_on_discovery - desposition + * @ioc: per adapter object + * + * Decide whether to wait on discovery to complete. Used to either + * locate boot device, or report volumes ahead of physical devices. + * + * Returns 1 for wait, 0 for don't wait + */ +static int +_base_determine_wait_on_discovery(struct MPT2SAS_ADAPTER *ioc) +{ + /* We wait for discovery to complete if IR firmware is loaded. + * The sas topology events arrive before PD events, so we need time to + * turn on the bit in ioc->pd_handles to indicate PD + * Also, it maybe required to report Volumes ahead of physical + * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set. + */ + if (ioc->ir_firmware) + return 1; + + /* if no Bios, then we don't need to wait */ + if (!ioc->bios_pg3.BiosVersion) + return 0; + + /* Bios is present, then we drop down here. + * + * If there any entries in the Bios Page 2, then we wait + * for discovery to complete. + */ + + /* Current Boot Device */ + if ((ioc->bios_pg2.CurrentBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK) == + MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED && + /* Request Boot Device */ + (ioc->bios_pg2.ReqBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK) == + MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED && + /* Alternate Request Boot Device */ + (ioc->bios_pg2.ReqAltBootDeviceForm & + MPI2_BIOSPAGE2_FORM_MASK) == + MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED) + return 0; + + return 1; +} + + +/** * _base_unmask_events - turn on notification for this event * @ioc: per adapter object * @event: firmware event @@ -3962,6 +4100,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) skip_init_reply_post_host_index: _base_unmask_interrupts(ioc); + r = _base_event_notification(ioc, sleep_flag); if (r) return r; @@ -3969,7 +4108,18 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) if (sleep_flag == CAN_SLEEP) _base_static_config_pages(ioc); - if (ioc->wait_for_port_enable_to_complete && ioc->is_warpdrive) { + + if (ioc->is_driver_loading) { + + + + ioc->wait_for_discovery_to_complete = + _base_determine_wait_on_discovery(ioc); + return r; /* scan_start and scan_finished support */ + } + + + if (ioc->wait_for_discovery_to_complete && ioc->is_warpdrive) { if (ioc->manu_pg10.OEMIdentifier == 0x80) { hide_flag = (u8) (ioc->manu_pg10.OEMSpecificFlags0 & MFG_PAGE10_HIDE_SSDS_MASK); @@ -3978,13 +4128,6 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) } } - if (ioc->wait_for_port_enable_to_complete) { - if (diag_buffer_enable != 0) - mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable); - if (disable_discovery > 0) - return r; - } - r = _base_send_port_enable(ioc, sleep_flag); if (r) return r; @@ -4121,6 +4264,10 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); ioc->base_cmds.status = MPT2_CMD_NOT_USED; + /* port_enable command bits */ + ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); + ioc->port_enable_cmds.status = MPT2_CMD_NOT_USED; + /* transport internal command bits */ ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); ioc->transport_cmds.status = MPT2_CMD_NOT_USED; @@ -4162,8 +4309,6 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) goto out_free_resources; } - init_completion(&ioc->shost_recovery_done); - for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) ioc->event_masks[i] = -1; @@ -4186,7 +4331,6 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) _base_update_missing_delay(ioc, missing_delay[0], missing_delay[1]); - mpt2sas_base_start_watchdog(ioc); return 0; out_free_resources: @@ -4204,6 +4348,7 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc) kfree(ioc->scsih_cmds.reply); kfree(ioc->config_cmds.reply); kfree(ioc->base_cmds.reply); + kfree(ioc->port_enable_cmds.reply); kfree(ioc->ctl_cmds.reply); kfree(ioc->ctl_cmds.sense); kfree(ioc->pfacts); @@ -4243,6 +4388,7 @@ mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc) kfree(ioc->ctl_cmds.reply); kfree(ioc->ctl_cmds.sense); kfree(ioc->base_cmds.reply); + kfree(ioc->port_enable_cmds.reply); kfree(ioc->tm_cmds.reply); kfree(ioc->transport_cmds.reply); kfree(ioc->scsih_cmds.reply); @@ -4284,6 +4430,20 @@ _base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) mpt2sas_base_free_smid(ioc, ioc->base_cmds.smid); complete(&ioc->base_cmds.done); } + if (ioc->port_enable_cmds.status & MPT2_CMD_PENDING) { + ioc->port_enable_failed = 1; + ioc->port_enable_cmds.status |= MPT2_CMD_RESET; + mpt2sas_base_free_smid(ioc, ioc->port_enable_cmds.smid); + if (ioc->is_driver_loading) { + ioc->start_scan_failed = + MPI2_IOCSTATUS_INTERNAL_ERROR; + ioc->start_scan = 0; + ioc->port_enable_cmds.status = + MPT2_CMD_NOT_USED; + } else + complete(&ioc->port_enable_cmds.done); + + } if (ioc->config_cmds.status & MPT2_CMD_PENDING) { ioc->config_cmds.status |= MPT2_CMD_RESET; mpt2sas_base_free_smid(ioc, ioc->config_cmds.smid); @@ -4349,7 +4509,6 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, { int r; unsigned long flags; - u8 pe_complete = ioc->wait_for_port_enable_to_complete; dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name, __func__)); @@ -4396,7 +4555,8 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, /* If this hard reset is called while port enable is active, then * there is no reason to call make_ioc_operational */ - if (pe_complete) { + if (ioc->is_driver_loading && ioc->port_enable_failed) { + ioc->remove_host = 1; r = -EFAULT; goto out; } @@ -4410,7 +4570,6 @@ mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag, spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); ioc->ioc_reset_in_progress_status = r; ioc->shost_recovery = 0; - complete(&ioc->shost_recovery_done); spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); mutex_unlock(&ioc->reset_in_progress_mutex); diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 59354dba68c..3c3babc7d26 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -69,11 +69,11 @@ #define MPT2SAS_DRIVER_NAME "mpt2sas" #define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>" #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" -#define MPT2SAS_DRIVER_VERSION "09.100.00.01" -#define MPT2SAS_MAJOR_VERSION 09 +#define MPT2SAS_DRIVER_VERSION "10.100.00.00" +#define MPT2SAS_MAJOR_VERSION 10 #define MPT2SAS_MINOR_VERSION 100 #define MPT2SAS_BUILD_VERSION 00 -#define MPT2SAS_RELEASE_VERSION 01 +#define MPT2SAS_RELEASE_VERSION 00 /* * Set MPT2SAS_SG_DEPTH value based on user input. @@ -655,7 +655,12 @@ enum mutex_type { * @ignore_loginfos: ignore loginfos during task management * @remove_host: flag for when driver unloads, to avoid sending dev resets * @pci_error_recovery: flag to prevent ioc access until slot reset completes - * @wait_for_port_enable_to_complete: + * @wait_for_discovery_to_complete: flag set at driver load time when + * waiting on reporting devices + * @is_driver_loading: flag set at driver load time + * @port_enable_failed: flag set when port enable has failed + * @start_scan: flag set from scan_start callback, cleared from _mpt2sas_fw_work + * @start_scan_failed: means port enable failed, return's the ioc_status * @msix_enable: flag indicating msix is enabled * @msix_vector_count: number msix vectors * @cpu_msix_table: table for mapping cpus to msix index @@ -790,15 +795,20 @@ struct MPT2SAS_ADAPTER { u8 shost_recovery; struct mutex reset_in_progress_mutex; - struct completion shost_recovery_done; spinlock_t ioc_reset_in_progress_lock; u8 ioc_link_reset_in_progress; - int ioc_reset_in_progress_status; + u8 ioc_reset_in_progress_status; u8 ignore_loginfos; u8 remove_host; u8 pci_error_recovery; - u8 wait_for_port_enable_to_complete; + u8 wait_for_discovery_to_complete; + struct completion port_enable_done; + u8 is_driver_loading; + u8 port_enable_failed; + + u8 start_scan; + u16 start_scan_failed; u8 msix_enable; u16 msix_vector_count; @@ -814,11 +824,13 @@ struct MPT2SAS_ADAPTER { u8 scsih_cb_idx; u8 ctl_cb_idx; u8 base_cb_idx; + u8 port_enable_cb_idx; u8 config_cb_idx; u8 tm_tr_cb_idx; u8 tm_tr_volume_cb_idx; u8 tm_sas_control_cb_idx; struct _internal_cmd base_cmds; + struct _internal_cmd port_enable_cmds; struct _internal_cmd transport_cmds; struct _internal_cmd scsih_cmds; struct _internal_cmd tm_cmds; @@ -1001,6 +1013,8 @@ void mpt2sas_base_release_callback_handler(u8 cb_idx); u8 mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply); +u8 mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, + u8 msix_index, u32 reply); void *mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr); u32 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked); @@ -1015,6 +1029,8 @@ void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_ty void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc); +int mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc); + /* scsih shared API */ u8 mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply); @@ -1032,6 +1048,8 @@ struct _sas_node *mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAP struct _sas_device *mpt2sas_scsih_sas_device_find_by_sas_address( struct MPT2SAS_ADAPTER *ioc, u64 sas_address); +void mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc); + void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase); /* config shared API */ diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c index 2b1101076cf..36ea0b2d802 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_config.c +++ b/drivers/scsi/mpt2sas/mpt2sas_config.c @@ -1356,6 +1356,9 @@ mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle, Mpi2ConfigReply_t mpi_reply; int r, i, config_page_sz; u16 ioc_status; + int config_num; + u16 element_type; + u16 phys_disk_dev_handle; *volume_handle = 0; memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t)); @@ -1371,35 +1374,53 @@ mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle, if (r) goto out; - mpi_request.PageAddress = - cpu_to_le32(MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG); mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT; config_page_sz = (le16_to_cpu(mpi_reply.ExtPageLength) * 4); config_page = kmalloc(config_page_sz, GFP_KERNEL); - if (!config_page) - goto out; - r = _config_request(ioc, &mpi_request, &mpi_reply, - MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, - config_page_sz); - if (r) + if (!config_page) { + r = -1; goto out; - - r = -1; - ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; - if (ioc_status != MPI2_IOCSTATUS_SUCCESS) - goto out; - for (i = 0; i < config_page->NumElements; i++) { - if ((le16_to_cpu(config_page->ConfigElement[i].ElementFlags) & - MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE) != - MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT) - continue; - if (le16_to_cpu(config_page->ConfigElement[i]. - PhysDiskDevHandle) == pd_handle) { - *volume_handle = le16_to_cpu(config_page-> - ConfigElement[i].VolDevHandle); - r = 0; + } + config_num = 0xff; + while (1) { + mpi_request.PageAddress = cpu_to_le32(config_num + + MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM); + r = _config_request(ioc, &mpi_request, &mpi_reply, + MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, + config_page_sz); + if (r) + goto out; + r = -1; + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status != MPI2_IOCSTATUS_SUCCESS) goto out; + for (i = 0; i < config_page->NumElements; i++) { + element_type = le16_to_cpu(config_page-> + ConfigElement[i].ElementFlags) & + MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE; + if (element_type == + MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT || + element_type == + MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT) { + phys_disk_dev_handle = + le16_to_cpu(config_page->ConfigElement[i]. + PhysDiskDevHandle); + if (phys_disk_dev_handle == pd_handle) { + *volume_handle = + le16_to_cpu(config_page-> + ConfigElement[i].VolDevHandle); + r = 0; + goto out; + } + } else if (element_type == + MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT) { + *volume_handle = 0; + r = 0; + goto out; + } } + config_num = config_page->ConfigNum; } out: kfree(config_page); diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index 9adb0133d6f..aabcb911706 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -1207,6 +1207,9 @@ _ctl_do_reset(void __user *arg) if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc) return -ENODEV; + if (ioc->shost_recovery || ioc->pci_error_recovery || + ioc->is_driver_loading) + return -EAGAIN; dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name, __func__)); @@ -2178,7 +2181,8 @@ _ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg) !ioc) return -ENODEV; - if (ioc->shost_recovery || ioc->pci_error_recovery) + if (ioc->shost_recovery || ioc->pci_error_recovery || + ioc->is_driver_loading) return -EAGAIN; if (_IOC_SIZE(cmd) == sizeof(struct mpt2_ioctl_command)) { @@ -2297,7 +2301,8 @@ _ctl_compat_mpt_command(struct file *file, unsigned cmd, unsigned long arg) if (_ctl_verify_adapter(karg32.hdr.ioc_number, &ioc) == -1 || !ioc) return -ENODEV; - if (ioc->shost_recovery || ioc->pci_error_recovery) + if (ioc->shost_recovery || ioc->pci_error_recovery || + ioc->is_driver_loading) return -EAGAIN; memset(&karg, 0, sizeof(struct mpt2_ioctl_command)); diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 1da1aa1a11e..8889b1babca 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -71,6 +71,9 @@ static void _firmware_event_work(struct work_struct *work); static u8 _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid); +static void _scsih_scan_start(struct Scsi_Host *shost); +static int _scsih_scan_finished(struct Scsi_Host *shost, unsigned long time); + /* global parameters */ LIST_HEAD(mpt2sas_ioc_list); @@ -79,6 +82,7 @@ static u8 scsi_io_cb_idx = -1; static u8 tm_cb_idx = -1; static u8 ctl_cb_idx = -1; static u8 base_cb_idx = -1; +static u8 port_enable_cb_idx = -1; static u8 transport_cb_idx = -1; static u8 scsih_cb_idx = -1; static u8 config_cb_idx = -1; @@ -103,6 +107,18 @@ static int max_lun = MPT2SAS_MAX_LUN; module_param(max_lun, int, 0); MODULE_PARM_DESC(max_lun, " max lun, default=16895 "); +/* diag_buffer_enable is bitwise + * bit 0 set = TRACE + * bit 1 set = SNAPSHOT + * bit 2 set = EXTENDED + * + * Either bit can be set, or both + */ +static int diag_buffer_enable = -1; +module_param(diag_buffer_enable, int, 0); +MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers " + "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)"); + /** * struct sense_info - common structure for obtaining sense keys * @skey: sense key @@ -117,8 +133,8 @@ struct sense_info { #define MPT2SAS_TURN_ON_FAULT_LED (0xFFFC) -#define MPT2SAS_RESCAN_AFTER_HOST_RESET (0xFFFF) - +#define MPT2SAS_PORT_ENABLE_COMPLETE (0xFFFD) +#define MPT2SAS_REMOVE_UNRESPONDING_DEVICES (0xFFFF) /** * struct fw_event_work - firmware event struct * @list: link list framework @@ -372,31 +388,34 @@ _scsih_get_sas_address(struct MPT2SAS_ADAPTER *ioc, u16 handle, Mpi2SasDevicePage0_t sas_device_pg0; Mpi2ConfigReply_t mpi_reply; u32 ioc_status; + *sas_address = 0; if (handle <= ioc->sas_hba.num_phys) { *sas_address = ioc->sas_hba.sas_address; return 0; - } else - *sas_address = 0; + } if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) { - printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", - ioc->name, __FILE__, __LINE__, __func__); + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); return -ENXIO; } - ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & - MPI2_IOCSTATUS_MASK; - if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { - printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x)" - "\nfailure at %s:%d/%s()!\n", ioc->name, handle, ioc_status, - __FILE__, __LINE__, __func__); - return -EIO; + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { + *sas_address = le64_to_cpu(sas_device_pg0.SASAddress); + return 0; } - *sas_address = le64_to_cpu(sas_device_pg0.SASAddress); - return 0; + /* we hit this becuase the given parent handle doesn't exist */ + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + return -ENXIO; + /* else error case */ + printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x), " + "failure at %s:%d/%s()!\n", ioc->name, handle, ioc_status, + __FILE__, __LINE__, __func__); + return -EIO; } /** @@ -424,7 +443,11 @@ _scsih_determine_boot_device(struct MPT2SAS_ADAPTER *ioc, u16 slot; /* only process this function when driver loads */ - if (!ioc->wait_for_port_enable_to_complete) + if (!ioc->is_driver_loading) + return; + + /* no Bios, return immediately */ + if (!ioc->bios_pg3.BiosVersion) return; if (!is_raid) { @@ -587,8 +610,15 @@ _scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc, spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (!mpt2sas_transport_port_add(ioc, sas_device->handle, - sas_device->sas_address_parent)) + sas_device->sas_address_parent)) { _scsih_sas_device_remove(ioc, sas_device); + } else if (!sas_device->starget) { + if (!ioc->is_driver_loading) + mpt2sas_transport_port_remove(ioc, + sas_device->sas_address, + sas_device->sas_address_parent); + _scsih_sas_device_remove(ioc, sas_device); + } } /** @@ -1400,6 +1430,10 @@ _scsih_slave_destroy(struct scsi_device *sdev) { struct MPT2SAS_TARGET *sas_target_priv_data; struct scsi_target *starget; + struct Scsi_Host *shost; + struct MPT2SAS_ADAPTER *ioc; + struct _sas_device *sas_device; + unsigned long flags; if (!sdev->hostdata) return; @@ -1407,6 +1441,19 @@ _scsih_slave_destroy(struct scsi_device *sdev) starget = scsi_target(sdev); sas_target_priv_data = starget->hostdata; sas_target_priv_data->num_luns--; + + shost = dev_to_shost(&starget->dev); + ioc = shost_priv(shost); + + if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) { + spin_lock_irqsave(&ioc->sas_device_lock, flags); + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + sas_target_priv_data->sas_address); + if (sas_device) + sas_device->starget = NULL; + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + } + kfree(sdev->hostdata); sdev->hostdata = NULL; } @@ -1598,8 +1645,10 @@ _scsih_set_level(struct scsi_device *sdev, struct _raid_device *raid_device) * _scsih_get_volume_capabilities - volume capabilities * @ioc: per adapter object * @sas_device: the raid_device object + * + * Returns 0 for success, else 1 */ -static void +static int _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc, struct _raid_device *raid_device) { @@ -1612,9 +1661,10 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc, if ((mpt2sas_config_get_number_pds(ioc, raid_device->handle, &num_pds)) || !num_pds) { - printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", - ioc->name, __FILE__, __LINE__, __func__); - return; + dfailprintk(ioc, printk(MPT2SAS_WARN_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, + __func__)); + return 1; } raid_device->num_pds = num_pds; @@ -1622,17 +1672,19 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc, sizeof(Mpi2RaidVol0PhysDisk_t)); vol_pg0 = kzalloc(sz, GFP_KERNEL); if (!vol_pg0) { - printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", - ioc->name, __FILE__, __LINE__, __func__); - return; + dfailprintk(ioc, printk(MPT2SAS_WARN_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, + __func__)); + return 1; } if ((mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) { - printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", - ioc->name, __FILE__, __LINE__, __func__); + dfailprintk(ioc, printk(MPT2SAS_WARN_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, + __func__)); kfree(vol_pg0); - return; + return 1; } raid_device->volume_type = vol_pg0->VolumeType; @@ -1652,6 +1704,7 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc, } kfree(vol_pg0); + return 0; } /** * _scsih_disable_ddio - Disable direct I/O for all the volumes @@ -1922,13 +1975,20 @@ _scsih_slave_configure(struct scsi_device *sdev) sas_target_priv_data->handle); spin_unlock_irqrestore(&ioc->raid_device_lock, flags); if (!raid_device) { - printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", - ioc->name, __FILE__, __LINE__, __func__); - return 0; + dfailprintk(ioc, printk(MPT2SAS_WARN_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, + __LINE__, __func__)); + return 1; } _scsih_get_volume_capabilities(ioc, raid_device); + if (_scsih_get_volume_capabilities(ioc, raid_device)) { + dfailprintk(ioc, printk(MPT2SAS_WARN_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, + __LINE__, __func__)); + return 1; + } /* * WARPDRIVE: Initialize the required data for Direct IO */ @@ -2002,11 +2062,22 @@ _scsih_slave_configure(struct scsi_device *sdev) if (sas_device) { if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) { - mpt2sas_config_get_volume_handle(ioc, - sas_device->handle, &sas_device->volume_handle); - mpt2sas_config_get_volume_wwid(ioc, + if (mpt2sas_config_get_volume_handle(ioc, + sas_device->handle, &sas_device->volume_handle)) { + dfailprintk(ioc, printk(MPT2SAS_WARN_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__)); + return 1; + } + if (sas_device->volume_handle && + mpt2sas_config_get_volume_wwid(ioc, sas_device->volume_handle, - &sas_device->volume_wwid); + &sas_device->volume_wwid)) { + dfailprintk(ioc, printk(MPT2SAS_WARN_FMT + "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__)); + return 1; + } } if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) { qdepth = MPT2SAS_SAS_QUEUE_DEPTH; @@ -2035,6 +2106,11 @@ _scsih_slave_configure(struct scsi_device *sdev) if (!ssp_target) _scsih_display_sata_capabilities(ioc, sas_device, sdev); + } else { + dfailprintk(ioc, printk(MPT2SAS_WARN_FMT + "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, + __func__)); + return 1; } _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT); @@ -2714,22 +2790,38 @@ _scsih_fw_event_free(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work /** - * _scsih_queue_rescan - queue a topology rescan from user context + * _scsih_error_recovery_delete_devices - remove devices not responding * @ioc: per adapter object * * Return nothing. */ static void -_scsih_queue_rescan(struct MPT2SAS_ADAPTER *ioc) +_scsih_error_recovery_delete_devices(struct MPT2SAS_ADAPTER *ioc) { struct fw_event_work *fw_event; - if (ioc->wait_for_port_enable_to_complete) + if (ioc->is_driver_loading) return; + fw_event->event = MPT2SAS_REMOVE_UNRESPONDING_DEVICES; + fw_event->ioc = ioc; + _scsih_fw_event_add(ioc, fw_event); +} + +/** + * mpt2sas_port_enable_complete - port enable completed (fake event) + * @ioc: per adapter object + * + * Return nothing. + */ +void +mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc) +{ + struct fw_event_work *fw_event; + fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); if (!fw_event) return; - fw_event->event = MPT2SAS_RESCAN_AFTER_HOST_RESET; + fw_event->event = MPT2SAS_PORT_ENABLE_COMPLETE; fw_event->ioc = ioc; _scsih_fw_event_add(ioc, fw_event); } @@ -2977,14 +3069,27 @@ _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle) Mpi2SCSITaskManagementRequest_t *mpi_request; u16 smid; struct _sas_device *sas_device; - struct MPT2SAS_TARGET *sas_target_priv_data; + struct MPT2SAS_TARGET *sas_target_priv_data = NULL; + u64 sas_address = 0; unsigned long flags; struct _tr_list *delayed_tr; + u32 ioc_state; - if (ioc->shost_recovery || ioc->remove_host || - ioc->pci_error_recovery) { - dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in " - "progress!\n", __func__, ioc->name)); + if (ioc->remove_host) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been " + "removed: handle(0x%04x)\n", __func__, ioc->name, handle)); + return; + } else if (ioc->pci_error_recovery) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci " + "error recovery: handle(0x%04x)\n", __func__, ioc->name, + handle)); + return; + } + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not " + "operational: handle(0x%04x)\n", __func__, ioc->name, + handle)); return; } @@ -2998,13 +3103,18 @@ _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle) sas_device->starget->hostdata) { sas_target_priv_data = sas_device->starget->hostdata; sas_target_priv_data->deleted = 1; - dewtprintk(ioc, printk(MPT2SAS_INFO_FMT - "setting delete flag: handle(0x%04x), " - "sas_addr(0x%016llx)\n", ioc->name, handle, - (unsigned long long) sas_device->sas_address)); + sas_address = sas_device->sas_address; } spin_unlock_irqrestore(&ioc->sas_device_lock, flags); + if (sas_target_priv_data) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "setting delete flag: " + "handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name, handle, + (unsigned long long)sas_address)); + _scsih_ublock_io_device(ioc, handle); + sas_target_priv_data->handle = MPT2SAS_INVALID_DEVICE_HANDLE; + } + smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx); if (!smid) { delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC); @@ -3185,11 +3295,21 @@ _scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, mpt2sas_base_get_reply_virt_addr(ioc, reply); Mpi2SasIoUnitControlRequest_t *mpi_request; u16 smid_sas_ctrl; + u32 ioc_state; - if (ioc->shost_recovery || ioc->remove_host || - ioc->pci_error_recovery) { - dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in " - "progress!\n", __func__, ioc->name)); + if (ioc->remove_host) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been " + "removed\n", __func__, ioc->name)); + return 1; + } else if (ioc->pci_error_recovery) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci " + "error recovery\n", __func__, ioc->name)); + return 1; + } + ioc_state = mpt2sas_base_get_iocstate(ioc, 1); + if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not " + "operational\n", __func__, ioc->name)); return 1; } @@ -5099,7 +5219,7 @@ _scsih_add_device(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 phy_num, u8 is_pd) /* get device name */ sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName); - if (ioc->wait_for_port_enable_to_complete) + if (ioc->wait_for_discovery_to_complete) _scsih_sas_device_init_add(ioc, sas_device); else _scsih_sas_device_add(ioc, sas_device); @@ -5135,6 +5255,9 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, if (sas_device_backup.starget && sas_device_backup.starget->hostdata) { sas_target_priv_data = sas_device_backup.starget->hostdata; sas_target_priv_data->deleted = 1; + _scsih_ublock_io_device(ioc, sas_device_backup.handle); + sas_target_priv_data->handle = + MPT2SAS_INVALID_DEVICE_HANDLE; } _scsih_ublock_io_device(ioc, sas_device_backup.handle); @@ -5288,7 +5411,7 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, _scsih_sas_topology_change_event_debug(ioc, event_data); #endif - if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery) + if (ioc->remove_host || ioc->pci_error_recovery) return; if (!ioc->sas_hba.num_phys) @@ -5349,6 +5472,9 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, switch (reason_code) { case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED: + if (ioc->shost_recovery) + break; + if (link_rate == prev_link_rate) break; @@ -5362,6 +5488,9 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, break; case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED: + if (ioc->shost_recovery) + break; + mpt2sas_transport_update_links(ioc, sas_address, handle, phy_number, link_rate); @@ -5622,7 +5751,7 @@ broadcast_aen_retry: termination_count = 0; query_count = 0; for (smid = 1; smid <= ioc->scsiio_depth; smid++) { - if (ioc->ioc_reset_in_progress_status) + if (ioc->shost_recovery) goto out; scmd = _scsih_scsi_lookup_get(ioc, smid); if (!scmd) @@ -5644,7 +5773,7 @@ broadcast_aen_retry: lun = sas_device_priv_data->lun; query_count++; - if (ioc->ioc_reset_in_progress_status) + if (ioc->shost_recovery) goto out; spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); @@ -5686,7 +5815,7 @@ broadcast_aen_retry: goto broadcast_aen_retry; } - if (ioc->ioc_reset_in_progress_status) + if (ioc->shost_recovery) goto out_no_lock; r = mpt2sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id, @@ -5725,7 +5854,7 @@ broadcast_aen_retry: ioc->name, __func__, query_count, termination_count)); ioc->broadcast_aen_busy = 0; - if (!ioc->ioc_reset_in_progress_status) + if (!ioc->shost_recovery) _scsih_ublock_io_all_device(ioc); mutex_unlock(&ioc->tm_cmds.mutex); } @@ -5789,8 +5918,11 @@ _scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach) static void _scsih_reprobe_target(struct scsi_target *starget, int no_uld_attach) { - struct MPT2SAS_TARGET *sas_target_priv_data = starget->hostdata; + struct MPT2SAS_TARGET *sas_target_priv_data; + if (starget == NULL) + return; + sas_target_priv_data = starget->hostdata; if (no_uld_attach) sas_target_priv_data->flags |= MPT_TARGET_FLAGS_RAID_COMPONENT; else @@ -5845,7 +5977,7 @@ _scsih_sas_volume_add(struct MPT2SAS_ADAPTER *ioc, raid_device->handle = handle; raid_device->wwid = wwid; _scsih_raid_device_add(ioc, raid_device); - if (!ioc->wait_for_port_enable_to_complete) { + if (!ioc->wait_for_discovery_to_complete) { rc = scsi_add_device(ioc->shost, RAID_CHANNEL, raid_device->id, 0); if (rc) @@ -6127,6 +6259,10 @@ _scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, _scsih_sas_ir_config_change_event_debug(ioc, event_data); #endif + + if (ioc->shost_recovery) + return; + foreign_config = (le32_to_cpu(event_data->Flags) & MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0; @@ -6185,6 +6321,9 @@ _scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc, int rc; Mpi2EventDataIrVolume_t *event_data = fw_event->event_data; + if (ioc->shost_recovery) + return; + if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED) return; @@ -6267,6 +6406,9 @@ _scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, Mpi2EventDataIrPhysicalDisk_t *event_data = fw_event->event_data; u64 sas_address; + if (ioc->shost_recovery) + return; + if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED) return; @@ -6510,10 +6652,10 @@ _scsih_search_responding_sas_devices(struct MPT2SAS_ADAPTER *ioc) u32 device_info; u16 slot; - printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__); + printk(MPT2SAS_INFO_FMT "search for end-devices: start\n", ioc->name); if (list_empty(&ioc->sas_device_list)) - return; + goto out; handle = 0xFFFF; while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, @@ -6532,6 +6674,9 @@ _scsih_search_responding_sas_devices(struct MPT2SAS_ADAPTER *ioc) _scsih_mark_responding_sas_device(ioc, sas_address, slot, handle); } +out: + printk(MPT2SAS_INFO_FMT "search for end-devices: complete\n", + ioc->name); } /** @@ -6607,10 +6752,14 @@ _scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc) u16 handle; u8 phys_disk_num; - printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__); + if (!ioc->ir_firmware) + return; + + printk(MPT2SAS_INFO_FMT "search for raid volumes: start\n", + ioc->name); if (list_empty(&ioc->raid_device_list)) - return; + goto out; handle = 0xFFFF; while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, @@ -6649,6 +6798,9 @@ _scsih_search_responding_raid_devices(struct MPT2SAS_ADAPTER *ioc) set_bit(handle, ioc->pd_handles); } } +out: + printk(MPT2SAS_INFO_FMT "search for responding raid volumes: " + "complete\n", ioc->name); } /** @@ -6708,10 +6860,10 @@ _scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc) u64 sas_address; u16 handle; - printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, __func__); + printk(MPT2SAS_INFO_FMT "search for expanders: start\n", ioc->name); if (list_empty(&ioc->sas_expander_list)) - return; + goto out; handle = 0xFFFF; while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, @@ -6730,6 +6882,8 @@ _scsih_search_responding_expanders(struct MPT2SAS_ADAPTER *ioc) _scsih_mark_responding_expander(ioc, sas_address, handle); } + out: + printk(MPT2SAS_INFO_FMT "search for expanders: complete\n", ioc->name); } /** @@ -6745,6 +6899,8 @@ _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc) struct _sas_node *sas_expander; struct _raid_device *raid_device, *raid_device_next; + printk(MPT2SAS_INFO_FMT "removing unresponding devices: start\n", + ioc->name); list_for_each_entry_safe(sas_device, sas_device_next, &ioc->sas_device_list, list) { @@ -6764,6 +6920,9 @@ _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc) _scsih_remove_device(ioc, sas_device); } + if (!ioc->ir_firmware) + goto retry_expander_search; + list_for_each_entry_safe(raid_device, raid_device_next, &ioc->raid_device_list, list) { if (raid_device->responding) { @@ -6790,52 +6949,170 @@ _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc) mpt2sas_expander_remove(ioc, sas_expander->sas_address); goto retry_expander_search; } + printk(MPT2SAS_INFO_FMT "removing unresponding devices: complete\n", + ioc->name); + /* unblock devices */ + _scsih_ublock_io_all_device(ioc); +} + +static void +_scsih_refresh_expander_links(struct MPT2SAS_ADAPTER *ioc, + struct _sas_node *sas_expander, u16 handle) +{ + Mpi2ExpanderPage1_t expander_pg1; + Mpi2ConfigReply_t mpi_reply; + int i; + + for (i = 0 ; i < sas_expander->num_phys ; i++) { + if ((mpt2sas_config_get_expander_pg1(ioc, &mpi_reply, + &expander_pg1, i, handle))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + return; + } + + mpt2sas_transport_update_links(ioc, sas_expander->sas_address, + le16_to_cpu(expander_pg1.AttachedDevHandle), i, + expander_pg1.NegotiatedLinkRate >> 4); + } } /** - * _scsih_hide_unhide_sas_devices - add/remove device to/from OS + * _scsih_scan_for_devices_after_reset - scan for devices after host reset * @ioc: per adapter object * * Return nothing. */ static void -_scsih_hide_unhide_sas_devices(struct MPT2SAS_ADAPTER *ioc) +_scsih_scan_for_devices_after_reset(struct MPT2SAS_ADAPTER *ioc) { - struct _sas_device *sas_device, *sas_device_next; + Mpi2ExpanderPage0_t expander_pg0; + Mpi2SasDevicePage0_t sas_device_pg0; + Mpi2RaidVolPage1_t volume_pg1; + Mpi2RaidVolPage0_t volume_pg0; + Mpi2RaidPhysDiskPage0_t pd_pg0; + Mpi2EventIrConfigElement_t element; + Mpi2ConfigReply_t mpi_reply; + u8 phys_disk_num; + u16 ioc_status; + u16 handle, parent_handle; + u64 sas_address; + struct _sas_device *sas_device; + struct _sas_node *expander_device; + static struct _raid_device *raid_device; - if (!ioc->is_warpdrive || ioc->mfg_pg10_hide_flag != - MFG_PAGE10_HIDE_IF_VOL_PRESENT) - return; + printk(MPT2SAS_INFO_FMT "scan devices: start\n", ioc->name); - if (ioc->hide_drives) { - if (_scsih_get_num_volumes(ioc)) - return; - ioc->hide_drives = 0; - list_for_each_entry_safe(sas_device, sas_device_next, - &ioc->sas_device_list, list) { - if (!mpt2sas_transport_port_add(ioc, sas_device->handle, - sas_device->sas_address_parent)) { - _scsih_sas_device_remove(ioc, sas_device); - } else if (!sas_device->starget) { - mpt2sas_transport_port_remove(ioc, - sas_device->sas_address, - sas_device->sas_address_parent); - _scsih_sas_device_remove(ioc, sas_device); - } + _scsih_sas_host_refresh(ioc); + + /* expanders */ + handle = 0xFFFF; + while (!(mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0, + MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + handle = le16_to_cpu(expander_pg0.DevHandle); + expander_device = mpt2sas_scsih_expander_find_by_sas_address( + ioc, le64_to_cpu(expander_pg0.SASAddress)); + if (expander_device) + _scsih_refresh_expander_links(ioc, expander_device, + handle); + else + _scsih_expander_add(ioc, handle); + } + + if (!ioc->ir_firmware) + goto skip_to_sas; + + /* phys disk */ + phys_disk_num = 0xFF; + while (!(mpt2sas_config_get_phys_disk_pg0(ioc, &mpi_reply, + &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM, + phys_disk_num))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + phys_disk_num = pd_pg0.PhysDiskNum; + handle = le16_to_cpu(pd_pg0.DevHandle); + sas_device = _scsih_sas_device_find_by_handle(ioc, handle); + if (sas_device) + continue; + if (mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, + &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, + handle) != 0) + continue; + parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); + if (!_scsih_get_sas_address(ioc, parent_handle, + &sas_address)) { + mpt2sas_transport_update_links(ioc, sas_address, + handle, sas_device_pg0.PhyNum, + MPI2_SAS_NEG_LINK_RATE_1_5); + set_bit(handle, ioc->pd_handles); + _scsih_add_device(ioc, handle, 0, 1); } - } else { - if (!_scsih_get_num_volumes(ioc)) - return; - ioc->hide_drives = 1; - list_for_each_entry_safe(sas_device, sas_device_next, - &ioc->sas_device_list, list) { - mpt2sas_transport_port_remove(ioc, - sas_device->sas_address, - sas_device->sas_address_parent); + } + + /* volumes */ + handle = 0xFFFF; + while (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply, + &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + handle = le16_to_cpu(volume_pg1.DevHandle); + raid_device = _scsih_raid_device_find_by_wwid(ioc, + le64_to_cpu(volume_pg1.WWID)); + if (raid_device) + continue; + if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, + &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle, + sizeof(Mpi2RaidVolPage0_t))) + continue; + if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL || + volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE || + volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) { + memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t)); + element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED; + element.VolDevHandle = volume_pg1.DevHandle; + _scsih_sas_volume_add(ioc, &element); } } + + skip_to_sas: + + /* sas devices */ + handle = 0xFFFF; + while (!(mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, + &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE, + handle))) { + ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & + MPI2_IOCSTATUS_MASK; + if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) + break; + handle = le16_to_cpu(sas_device_pg0.DevHandle); + if (!(_scsih_is_end_device( + le32_to_cpu(sas_device_pg0.DeviceInfo)))) + continue; + sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, + le64_to_cpu(sas_device_pg0.SASAddress)); + if (sas_device) + continue; + parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle); + if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) { + mpt2sas_transport_update_links(ioc, sas_address, handle, + sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5); + _scsih_add_device(ioc, handle, 0, 0); + } + } + + printk(MPT2SAS_INFO_FMT "scan devices: complete\n", ioc->name); } + /** * mpt2sas_scsih_reset_handler - reset callback handler (for scsih) * @ioc: per adapter object @@ -6871,7 +7148,6 @@ mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) } _scsih_fw_event_cleanup_queue(ioc); _scsih_flush_running_cmds(ioc); - _scsih_queue_rescan(ioc); break; case MPT2_IOC_DONE_RESET: dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " @@ -6881,6 +7157,13 @@ mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase) _scsih_search_responding_sas_devices(ioc); _scsih_search_responding_raid_devices(ioc); _scsih_search_responding_expanders(ioc); + if (!ioc->is_driver_loading) { + _scsih_prep_device_scan(ioc); + _scsih_search_responding_sas_devices(ioc); + _scsih_search_responding_raid_devices(ioc); + _scsih_search_responding_expanders(ioc); + _scsih_error_recovery_delete_devices(ioc); + } break; } } @@ -6898,7 +7181,6 @@ _firmware_event_work(struct work_struct *work) { struct fw_event_work *fw_event = container_of(work, struct fw_event_work, delayed_work.work); - unsigned long flags; struct MPT2SAS_ADAPTER *ioc = fw_event->ioc; /* the queue is being flushed so ignore this event */ @@ -6908,23 +7190,21 @@ _firmware_event_work(struct work_struct *work) return; } - if (fw_event->event == MPT2SAS_RESCAN_AFTER_HOST_RESET) { - _scsih_fw_event_free(ioc, fw_event); - spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); - if (ioc->shost_recovery) { - init_completion(&ioc->shost_recovery_done); - spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, - flags); - wait_for_completion(&ioc->shost_recovery_done); - } else - spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, - flags); + switch (fw_event->event) { + case MPT2SAS_REMOVE_UNRESPONDING_DEVICES: + while (scsi_host_in_recovery(ioc->shost)) + ssleep(1); _scsih_remove_unresponding_sas_devices(ioc); - _scsih_hide_unhide_sas_devices(ioc); - return; - } + _scsih_scan_for_devices_after_reset(ioc); + break; + case MPT2SAS_PORT_ENABLE_COMPLETE: + ioc->start_scan = 0; - switch (fw_event->event) { + + + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "port enable: complete " + "from worker thread\n", ioc->name)); + break; case MPT2SAS_TURN_ON_FAULT_LED: _scsih_turn_on_fault_led(ioc, fw_event->device_handle); break; @@ -7121,6 +7401,8 @@ static struct scsi_host_template scsih_driver_template = { .slave_configure = _scsih_slave_configure, .target_destroy = _scsih_target_destroy, .slave_destroy = _scsih_slave_destroy, + .scan_finished = _scsih_scan_finished, + .scan_start = _scsih_scan_start, .change_queue_depth = _scsih_change_queue_depth, .change_queue_type = _scsih_change_queue_type, .eh_abort_handler = _scsih_abort, @@ -7381,7 +7663,12 @@ _scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc) unsigned long flags; int rc; + /* no Bios, return immediately */ + if (!ioc->bios_pg3.BiosVersion) + return; + device = NULL; + is_raid = 0; if (ioc->req_boot_device.device) { device = ioc->req_boot_device.device; is_raid = ioc->req_boot_device.is_raid; @@ -7417,8 +7704,9 @@ _scsih_probe_boot_devices(struct MPT2SAS_ADAPTER *ioc) sas_device->sas_address_parent)) { _scsih_sas_device_remove(ioc, sas_device); } else if (!sas_device->starget) { - mpt2sas_transport_port_remove(ioc, sas_address, - sas_address_parent); + if (!ioc->is_driver_loading) + mpt2sas_transport_port_remove(ioc, sas_address, + sas_address_parent); _scsih_sas_device_remove(ioc, sas_device); } } @@ -7462,22 +7750,28 @@ _scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc) /* SAS Device List */ list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list, list) { - spin_lock_irqsave(&ioc->sas_device_lock, flags); - list_move_tail(&sas_device->list, &ioc->sas_device_list); - spin_unlock_irqrestore(&ioc->sas_device_lock, flags); if (ioc->hide_drives) continue; if (!mpt2sas_transport_port_add(ioc, sas_device->handle, sas_device->sas_address_parent)) { - _scsih_sas_device_remove(ioc, sas_device); + list_del(&sas_device->list); + kfree(sas_device); + continue; } else if (!sas_device->starget) { - mpt2sas_transport_port_remove(ioc, - sas_device->sas_address, - sas_device->sas_address_parent); - _scsih_sas_device_remove(ioc, sas_device); + if (!ioc->is_driver_loading) + mpt2sas_transport_port_remove(ioc, + sas_device->sas_address, + sas_device->sas_address_parent); + list_del(&sas_device->list); + kfree(sas_device); + continue; + } + spin_lock_irqsave(&ioc->sas_device_lock, flags); + list_move_tail(&sas_device->list, &ioc->sas_device_list); + spin_unlock_irqrestore(&ioc->sas_device_lock, flags); } } @@ -7490,9 +7784,7 @@ _scsih_probe_sas(struct MPT2SAS_ADAPTER *ioc) static void _scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc) { - u16 volume_mapping_flags = - le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) & - MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE; + u16 volume_mapping_flags; if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR)) return; /* return when IOC doesn't support initiator mode */ @@ -7500,18 +7792,93 @@ _scsih_probe_devices(struct MPT2SAS_ADAPTER *ioc) _scsih_probe_boot_devices(ioc); if (ioc->ir_firmware) { - if ((volume_mapping_flags & - MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING)) { - _scsih_probe_sas(ioc); + volume_mapping_flags = + le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) & + MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE; + if (volume_mapping_flags == + MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) { _scsih_probe_raid(ioc); + _scsih_probe_sas(ioc); } else { - _scsih_probe_raid(ioc); _scsih_probe_sas(ioc); + _scsih_probe_raid(ioc); } } else _scsih_probe_sas(ioc); } + +/** + * _scsih_scan_start - scsi lld callback for .scan_start + * @shost: SCSI host pointer + * + * The shost has the ability to discover targets on its own instead + * of scanning the entire bus. In our implemention, we will kick off + * firmware discovery. + */ +static void +_scsih_scan_start(struct Scsi_Host *shost) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + int rc; + + if (diag_buffer_enable != -1 && diag_buffer_enable != 0) + mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable); + + ioc->start_scan = 1; + rc = mpt2sas_port_enable(ioc); + + if (rc != 0) + printk(MPT2SAS_INFO_FMT "port enable: FAILED\n", ioc->name); +} + +/** + * _scsih_scan_finished - scsi lld callback for .scan_finished + * @shost: SCSI host pointer + * @time: elapsed time of the scan in jiffies + * + * This function will be called periodically until it returns 1 with the + * scsi_host and the elapsed time of the scan in jiffies. In our implemention, + * we wait for firmware discovery to complete, then return 1. + */ +static int +_scsih_scan_finished(struct Scsi_Host *shost, unsigned long time) +{ + struct MPT2SAS_ADAPTER *ioc = shost_priv(shost); + + if (time >= (300 * HZ)) { + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + printk(MPT2SAS_INFO_FMT "port enable: FAILED with timeout " + "(timeout=300s)\n", ioc->name); + ioc->is_driver_loading = 0; + return 1; + } + + if (ioc->start_scan) + return 0; + + if (ioc->start_scan_failed) { + printk(MPT2SAS_INFO_FMT "port enable: FAILED with " + "(ioc_status=0x%08x)\n", ioc->name, ioc->start_scan_failed); + ioc->is_driver_loading = 0; + ioc->wait_for_discovery_to_complete = 0; + ioc->remove_host = 1; + return 1; + } + + printk(MPT2SAS_INFO_FMT "port enable: SUCCESS\n", ioc->name); + ioc->base_cmds.status = MPT2_CMD_NOT_USED; + + if (ioc->wait_for_discovery_to_complete) { + ioc->wait_for_discovery_to_complete = 0; + _scsih_probe_devices(ioc); + } + mpt2sas_base_start_watchdog(ioc); + ioc->is_driver_loading = 0; + return 1; +} + + /** * _scsih_probe - attach and add scsi host * @pdev: PCI device struct @@ -7548,6 +7915,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) ioc->tm_cb_idx = tm_cb_idx; ioc->ctl_cb_idx = ctl_cb_idx; ioc->base_cb_idx = base_cb_idx; + ioc->port_enable_cb_idx = port_enable_cb_idx; ioc->transport_cb_idx = transport_cb_idx; ioc->scsih_cb_idx = scsih_cb_idx; ioc->config_cb_idx = config_cb_idx; @@ -7620,14 +7988,14 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto out_thread_fail; } - ioc->wait_for_port_enable_to_complete = 1; + ioc->is_driver_loading = 1; if ((mpt2sas_base_attach(ioc))) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); goto out_attach_fail; } - ioc->wait_for_port_enable_to_complete = 0; + scsi_scan_host(shost); if (ioc->is_warpdrive) { if (ioc->mfg_pg10_hide_flag == MFG_PAGE10_EXPOSE_ALL_DISKS) ioc->hide_drives = 0; @@ -7650,6 +8018,7 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) out_thread_fail: list_del(&ioc->list); scsi_remove_host(shost); + scsi_host_put(shost); out_add_shost_fail: return -ENODEV; } @@ -7896,6 +8265,8 @@ _scsih_init(void) /* base internal commands callback handler */ base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done); + port_enable_cb_idx = mpt2sas_base_register_callback_handler( + mpt2sas_port_enable_done); /* transport internal commands callback handler */ transport_cb_idx = mpt2sas_base_register_callback_handler( @@ -7950,6 +8321,7 @@ _scsih_exit(void) mpt2sas_base_release_callback_handler(scsi_io_cb_idx); mpt2sas_base_release_callback_handler(tm_cb_idx); mpt2sas_base_release_callback_handler(base_cb_idx); + mpt2sas_base_release_callback_handler(port_enable_cb_idx); mpt2sas_base_release_callback_handler(transport_cb_idx); mpt2sas_base_release_callback_handler(scsih_cb_idx); mpt2sas_base_release_callback_handler(config_cb_idx); diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c index 621b5e07275..6f589195746 100644 --- a/drivers/scsi/mvsas/mv_init.c +++ b/drivers/scsi/mvsas/mv_init.c @@ -732,6 +732,16 @@ static struct pci_device_id __devinitdata mvs_pci_table[] = { .class_mask = 0, .driver_data = chip_9485, }, + { PCI_VDEVICE(OCZ, 0x1021), chip_9485}, /* OCZ RevoDrive3 */ + { PCI_VDEVICE(OCZ, 0x1022), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */ + { PCI_VDEVICE(OCZ, 0x1040), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */ + { PCI_VDEVICE(OCZ, 0x1041), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */ + { PCI_VDEVICE(OCZ, 0x1042), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */ + { PCI_VDEVICE(OCZ, 0x1043), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */ + { PCI_VDEVICE(OCZ, 0x1044), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */ + { PCI_VDEVICE(OCZ, 0x1080), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */ + { PCI_VDEVICE(OCZ, 0x1083), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */ + { PCI_VDEVICE(OCZ, 0x1084), chip_9485}, /* OCZ RevoDrive3/zDriveR4 (exact model unknown) */ { } /* terminate list */ }; diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index b86db84d6f3..5163edb925c 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -4102,7 +4102,7 @@ static long pmcraid_chr_ioctl( struct pmcraid_ioctl_header *hdr = NULL; int retval = -ENOTTY; - hdr = kmalloc(GFP_KERNEL, sizeof(struct pmcraid_ioctl_header)); + hdr = kmalloc(sizeof(struct pmcraid_ioctl_header), GFP_KERNEL); if (!hdr) { pmcraid_err("faile to allocate memory for ioctl header\n"); diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 3474e86e98a..2516adf1aee 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -2279,7 +2279,7 @@ qla25xx_msix_rsp_q(int irq, void *dev_id) ha = rsp->hw; /* Clear the interrupt, if enabled, for this response queue */ - if (rsp->options & ~BIT_6) { + if (!ha->flags.disable_msix_handshake) { reg = &ha->iobase->isp24; spin_lock_irqsave(&ha->hardware_lock, flags); WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index fc3f168decb..b4d43ae7613 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1698,6 +1698,15 @@ struct request_queue *scsi_alloc_queue(struct scsi_device *sdev) void scsi_free_queue(struct request_queue *q) { + unsigned long flags; + + WARN_ON(q->queuedata); + + /* cause scsi_request_fn() to kill all non-finished requests */ + spin_lock_irqsave(q->queue_lock, flags); + q->request_fn(q); + spin_unlock_irqrestore(q->queue_lock, flags); + blk_cleanup_queue(q); } diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 44e8ca398ef..72273a0e566 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -322,6 +322,7 @@ out_device_destroy: scsi_device_set_state(sdev, SDEV_DEL); transport_destroy_device(&sdev->sdev_gendev); put_device(&sdev->sdev_dev); + scsi_free_queue(sdev->request_queue); put_device(&sdev->sdev_gendev); out: if (display_failure_msg) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 1bcd65a509e..96029e6d027 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -520,7 +520,7 @@ fail_host_msg: /** * iscsi_bsg_host_add - Create and add the bsg hooks to receive requests * @shost: shost for iscsi_host - * @cls_host: iscsi_cls_host adding the structures to + * @ihost: iscsi_cls_host adding the structures to */ static int iscsi_bsg_host_add(struct Scsi_Host *shost, struct iscsi_cls_host *ihost) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index a7942e5c8be..fa3a5918009 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2590,18 +2590,16 @@ static int sd_probe(struct device *dev) spin_unlock(&sd_index_lock); } while (error == -EAGAIN); - if (error) + if (error) { + sdev_printk(KERN_WARNING, sdp, "sd_probe: memory exhausted.\n"); goto out_put; - - if (index >= SD_MAX_DISKS) { - error = -ENODEV; - sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name space exhausted.\n"); - goto out_free_index; } error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN); - if (error) + if (error) { + sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n"); goto out_free_index; + } sdkp->device = sdp; sdkp->driver = &sd_template; diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 6ad798bfd52..4163f2910e3 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -9,12 +9,6 @@ #define SD_MAJORS 16 /* - * This is limited by the naming scheme enforced in sd_probe, - * add another character to it if you really need more disks. - */ -#define SD_MAX_DISKS (((26 * 26) + 26 + 1) * 26) - -/* * Time out in seconds for disks and Magneto-opticals (which are slower). */ #define SD_TIMEOUT (30 * HZ) diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 1871b8ae83a..9b28f39bac2 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -462,14 +462,16 @@ static void st_scsi_execute_end(struct request *req, int uptodate) { struct st_request *SRpnt = req->end_io_data; struct scsi_tape *STp = SRpnt->stp; + struct bio *tmp; STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors; STp->buffer->cmdstat.residual = req->resid_len; + tmp = SRpnt->bio; if (SRpnt->waiting) complete(SRpnt->waiting); - blk_rq_unmap_user(SRpnt->bio); + blk_rq_unmap_user(tmp); __blk_put_request(req->q, req); } |