Input: add driver for Touchwin serial touchscreens

Signed-off-by: Rick Koch <n1gp@hotmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

3 files changed, 216 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 216db122937..9418bbe4707 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -132,4 +132,16 @@ config TOUCHSCREEN_TOUCHRIGHT
 	  To compile this driver as a module, choose M here: the
 	  module will be called touchright.
 
+config TOUCHSCREEN_TOUCHWIN
+	tristate "Touchwin serial touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have a Touchwin serial touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called touchwin.
+
 endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index deda25e3680..1abb8f10d60 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_TOUCHSCREEN_MK712)	+= mk712.o
 obj-$(CONFIG_TOUCHSCREEN_HP600)	+= hp680_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
+obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
diff --git a/drivers/input/touchscreen/touchwin.c b/drivers/input/touchscreen/touchwin.c
new file mode 100644
index 00000000000..a7b4c755958
--- /dev/null
+++ b/drivers/input/touchscreen/touchwin.c
@@ -0,0 +1,203 @@
+/*
+ * Touchwindow serial touchscreen driver
+ *
+ * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
+ *
+ * Based on MicroTouch driver (drivers/input/touchscreen/mtouch.c)
+ * Copyright (c) 2004 Vojtech Pavlik
+ * and Dan Streetman <ddstreet@ieee.org>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+/*
+ * 2005/02/19 Rick Koch:
+ *   The Touchwindow I used is made by Edmark Corp. and
+ *   constantly outputs a stream of 0's unless it is touched.
+ *   It then outputs 3 bytes: X, Y, and a copy of Y.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define DRIVER_DESC	"Touchwindow serial touchscreen driver"
+
+MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define TW_LENGTH 3
+
+#define TW_MIN_XC 0
+#define TW_MAX_XC 0xff
+#define TW_MIN_YC 0
+#define TW_MAX_YC 0xff
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct tw {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	int touched;
+	unsigned char data[TW_LENGTH];
+	char phys[32];
+};
+
+static irqreturn_t tw_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags, struct pt_regs *regs)
+{
+	struct tw *tw = serio_get_drvdata(serio);
+	struct input_dev *dev = tw->dev;
+
+	if (data) {		/* touch */
+		tw->touched = 1;
+		tw->data[tw->idx++] = data;
+		/* verify length and that the two Y's are the same */
+		if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) {
+			input_regs(dev, regs);
+			input_report_abs(dev, ABS_X, tw->data[0]);
+			input_report_abs(dev, ABS_Y, tw->data[1]);
+			input_report_key(dev, BTN_TOUCH, 1);
+			input_sync(dev);
+			tw->idx = 0;
+		}
+	} else if (tw->touched) {	/* untouch */
+		input_report_key(dev, BTN_TOUCH, 0);
+		input_sync(dev);
+		tw->idx = 0;
+		tw->touched = 0;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * tw_disconnect() is the opposite of tw_connect()
+ */
+
+static void tw_disconnect(struct serio *serio)
+{
+	struct tw *tw = serio_get_drvdata(serio);
+
+	input_get_device(tw->dev);
+	input_unregister_device(tw->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(tw->dev);
+	kfree(tw);
+}
+
+/*
+ * tw_connect() is the routine that is called when someone adds a
+ * new serio device that supports the Touchwin protocol and registers it as
+ * an input device.
+ */
+
+static int tw_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct tw *tw;
+	struct input_dev *input_dev;
+	int err;
+
+	tw = kzalloc(sizeof(struct tw), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!tw || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	tw->serio = serio;
+	tw->dev = input_dev;
+	snprintf(tw->phys, sizeof(tw->phys), "%s/input0", serio->phys);
+
+	input_dev->private = tw;
+	input_dev->name = "Touchwindow Serial TouchScreen";
+	input_dev->phys = tw->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_TOUCHWIN;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0100;
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+	input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+	input_set_abs_params(tw->dev, ABS_X, TW_MIN_XC, TW_MAX_XC, 0, 0);
+	input_set_abs_params(tw->dev, ABS_Y, TW_MIN_YC, TW_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, tw);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(tw->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(tw);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id tw_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_TOUCHWIN,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, tw_serio_ids);
+
+static struct serio_driver tw_drv = {
+	.driver		= {
+		.name	= "touchwin",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= tw_serio_ids,
+	.interrupt	= tw_interrupt,
+	.connect	= tw_connect,
+	.disconnect	= tw_disconnect,
+};
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init tw_init(void)
+{
+	serio_register_driver(&tw_drv);
+	return 0;
+}
+
+static void __exit tw_exit(void)
+{
+	serio_unregister_driver(&tw_drv);
+}
+
+module_init(tw_init);
+module_exit(tw_exit);